← Commit history

tl071cp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·531bf79757 · ·parent 0055f51
2 files changed +92−12
package.json+50−10
@@ -72,21 +72,21 @@       },       {         "number": "2",-        "name": "IN\u2013",+        "name": "IN–",         "type": "input",-        "description": "Inverting input with input bias current 65-200 pA at 25\u00b0C and common-mode input range of \u221212 to +15 V."+        "description": "Inverting input with input bias current 65-200 pA at 25°C and common-mode input range of −12 to +15 V."       },       {         "number": "3",         "name": "IN+",         "type": "input",-        "description": "Non-inverting input with input bias current 65-200 pA at 25\u00b0C and common-mode input range of \u221212 to +15 V."+        "description": "Non-inverting input with input bias current 65-200 pA at 25°C and common-mode input range of −12 to +15 V."       },       {         "number": "4",-        "name": "VCC\u2013",+        "name": "VCC–",         "type": "power_in",-        "description": "Negative power supply rail; part of \u00b115 V dual supply or ground reference for single supply operation."+        "description": "Negative power supply rail; part of ±15 V dual supply or ground reference for single supply operation."       },       {         "number": "5",@@ -98,13 +98,13 @@         "number": "6",         "name": "OUT",         "type": "output",-        "description": "Amplifier output with maximum voltage swing of \u00b112 V at RL \u2265 10 k\u03a9; short-circuit protected to ground."+        "description": "Amplifier output with maximum voltage swing of ±12 V at RL ≥ 10 kΩ; short-circuit protected to ground."       },       {         "number": "7",         "name": "VCC+",         "type": "power_in",-        "description": "Positive power supply rail; operates from 4.5 V to 40 V single supply or \u00b115 V dual supply."+        "description": "Positive power supply rail; operates from 4.5 V to 40 V single supply or ±15 V dual supply."       },       {         "number": "8",@@ -124,7 +124,7 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: TL071CP datasheet provided is a Chinese translation. Pin descriptions translated from \u53cd\u76f8\u8f93\u5165 (invertin"+          "extractor flagged: TL071CP datasheet provided is a Chinese translation. Pin descriptions translated from 反相输入 (invertin"         ],         "pages_sent": 90,         "cost_usd": 0.4674,@@ -147,6 +147,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tl071cp.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tl071cp-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e99d7632fe34121f9cda6b8dabc101acfa6debe10285f5fc6d89c5b3f2b8c892",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -132,7 +132,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tl071cp.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tl071cp-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e99d7632fe34121f9cda6b8dabc101acfa6debe10285f5fc6d89c5b3f2b8c892",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -179,4 +219,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}