component
TL064IPWR
Public Made by Adomby adom
Texas Instruments FET InputAmplifiers, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
tl064ipwr: factory component page (tier=lcsc)
3 files changed
+40−35
README.md+16−14@@ -8,20 +8,20 @@ TL064IPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions ext | Pin | Name | Type | Function | |---|---|---|---|-| 1 | 1OUT | output | Output of amplifier 1. Short-circuit protected; can drive RL ≥ 2 kΩ with ±10 V output swing (±13.5 V typ) on ±15 V supplies. |-| 2 | 1IN- | input | Inverting input of amplifier 1. JFET input with very high input resistance (10^12 Ω typ) and low input bias current (30 pA typ). |-| 3 | 1IN+ | input | Non-inverting input of amplifier 1. JFET input with very high input resistance (10^12 Ω typ). Common-mode range includes VCC+. |-| 4 | VCC+ | power_in | Positive supply pin. Recommended operating range +5 V to +15 V; absolute maximum +18 V. |-| 5 | 2IN+ | input | Non-inverting input of amplifier 2. JFET input, very high input impedance. |-| 6 | 2IN- | input | Inverting input of amplifier 2. JFET input, very high input impedance. |-| 7 | 2OUT | output | Output of amplifier 2. Short-circuit protected; ±10 V typ swing into RL ≥ 2 kΩ on ±15 V supplies. |-| 8 | 3OUT | output | Output of amplifier 3. Short-circuit protected; ±10 V typ swing into RL ≥ 2 kΩ on ±15 V supplies. |-| 9 | 3IN- | input | Inverting input of amplifier 3. JFET input, very high input impedance. |-| 10 | 3IN+ | input | Non-inverting input of amplifier 3. JFET input, very high input impedance. |-| 11 | VCC- | power_in | Negative supply pin. Recommended operating range -5 V to -15 V; absolute maximum -18 V. May be tied to GND for single-supply operation. |-| 12 | 4IN+ | input | Non-inverting input of amplifier 4. JFET input, very high input impedance. |-| 13 | 4IN- | input | Inverting input of amplifier 4. JFET input, very high input impedance. |-| 14 | 4OUT | output | Output of amplifier 4. Short-circuit protected; ±10 V typ swing into RL ≥ 2 kΩ on ±15 V supplies. |+| 1 | 1OUT | output | Output of op-amp channel 1. Short-circuit protected; can drive to ground or either supply. |+| 2 | 1IN- | input | Inverting (negative) input of op-amp channel 1. High-impedance JFET input; input voltage magnitude must not exceed the supply magnitude or 15 V. |+| 3 | 1IN+ | input | Non-inverting (positive) input of op-amp channel 1. High-impedance JFET input; common-mode range includes VCC+. |+| 4 | VCC+ | power_in | Positive supply rail. Recommended operating range +5 V to +15 V; absolute maximum +18 V. Shared across all four amplifiers. |+| 5 | 2IN+ | input | Non-inverting (positive) input of op-amp channel 2. High-impedance JFET input. |+| 6 | 2IN- | input | Inverting (negative) input of op-amp channel 2. High-impedance JFET input. |+| 7 | 2OUT | output | Output of op-amp channel 2. Short-circuit protected. |+| 8 | 3OUT | output | Output of op-amp channel 3. Short-circuit protected. |+| 9 | 3IN- | input | Inverting (negative) input of op-amp channel 3. High-impedance JFET input. |+| 10 | 3IN+ | input | Non-inverting (positive) input of op-amp channel 3. High-impedance JFET input. |+| 11 | VCC- | power_in | Negative supply rail. Recommended operating range -5 V to -15 V; absolute maximum -18 V. Tie to GND for single-supply operation. Shared across all four amplifiers. |+| 12 | 4IN+ | input | Non-inverting (positive) input of op-amp channel 4. High-impedance JFET input. |+| 13 | 4IN- | input | Inverting (negative) input of op-amp channel 4. High-impedance JFET input. |+| 14 | 4OUT | output | Output of op-amp channel 4. Short-circuit protected. | ## Key specifications @@ -37,8 +37,10 @@ TL064IPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions ext - `TL064IPWRPW` - `TL064IPWRPWR` - `TL064IPWRD`+- `TL064IPWRDR` - `TL064IPWRN` - `TL064IPWRNS`+- `TL064IPWRNSR` - `TL064IPWRJ` - `TL064IPWRW` - `TL064IPWRFK`
page.json+15−18@@ -32,85 +32,85 @@ "number": "1", "name": "1OUT", "type": "output",- "description": "Output of amplifier 1. Short-circuit protected; can drive RL ≥ 2 kΩ with ±10 V output swing (±13.5 V typ) on ±15 V supplies."+ "description": "Output of op-amp channel 1. Short-circuit protected; can drive to ground or either supply." }, { "number": "2", "name": "1IN-", "type": "input",- "description": "Inverting input of amplifier 1. JFET input with very high input resistance (10^12 Ω typ) and low input bias current (30 pA typ)."+ "description": "Inverting (negative) input of op-amp channel 1. High-impedance JFET input; input voltage magnitude must not exceed the supply magnitude or 15 V." }, { "number": "3", "name": "1IN+", "type": "input",- "description": "Non-inverting input of amplifier 1. JFET input with very high input resistance (10^12 Ω typ). Common-mode range includes VCC+."+ "description": "Non-inverting (positive) input of op-amp channel 1. High-impedance JFET input; common-mode range includes VCC+." }, { "number": "4", "name": "VCC+", "type": "power_in",- "description": "Positive supply pin. Recommended operating range +5 V to +15 V; absolute maximum +18 V."+ "description": "Positive supply rail. Recommended operating range +5 V to +15 V; absolute maximum +18 V. Shared across all four amplifiers." }, { "number": "5", "name": "2IN+", "type": "input",- "description": "Non-inverting input of amplifier 2. JFET input, very high input impedance."+ "description": "Non-inverting (positive) input of op-amp channel 2. High-impedance JFET input." }, { "number": "6", "name": "2IN-", "type": "input",- "description": "Inverting input of amplifier 2. JFET input, very high input impedance."+ "description": "Inverting (negative) input of op-amp channel 2. High-impedance JFET input." }, { "number": "7", "name": "2OUT", "type": "output",- "description": "Output of amplifier 2. Short-circuit protected; ±10 V typ swing into RL ≥ 2 kΩ on ±15 V supplies."+ "description": "Output of op-amp channel 2. Short-circuit protected." }, { "number": "8", "name": "3OUT", "type": "output",- "description": "Output of amplifier 3. Short-circuit protected; ±10 V typ swing into RL ≥ 2 kΩ on ±15 V supplies."+ "description": "Output of op-amp channel 3. Short-circuit protected." }, { "number": "9", "name": "3IN-", "type": "input",- "description": "Inverting input of amplifier 3. JFET input, very high input impedance."+ "description": "Inverting (negative) input of op-amp channel 3. High-impedance JFET input." }, { "number": "10", "name": "3IN+", "type": "input",- "description": "Non-inverting input of amplifier 3. JFET input, very high input impedance."+ "description": "Non-inverting (positive) input of op-amp channel 3. High-impedance JFET input." }, { "number": "11", "name": "VCC-", "type": "power_in",- "description": "Negative supply pin. Recommended operating range -5 V to -15 V; absolute maximum -18 V. May be tied to GND for single-supply operation."+ "description": "Negative supply rail. Recommended operating range -5 V to -15 V; absolute maximum -18 V. Tie to GND for single-supply operation. Shared across all four amplifiers." }, { "number": "12", "name": "4IN+", "type": "input",- "description": "Non-inverting input of amplifier 4. JFET input, very high input impedance."+ "description": "Non-inverting (positive) input of op-amp channel 4. High-impedance JFET input." }, { "number": "13", "name": "4IN-", "type": "input",- "description": "Inverting input of amplifier 4. JFET input, very high input impedance."+ "description": "Inverting (negative) input of op-amp channel 4. High-impedance JFET input." }, { "number": "14", "name": "4OUT", "type": "output",- "description": "Output of amplifier 4. Short-circuit protected; ±10 V typ swing into RL ≥ 2 kΩ on ±15 V supplies."+ "description": "Output of op-amp channel 4. Short-circuit protected." } ], "provenance": {@@ -174,8 +174,5 @@ "docs/tl064ipwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }
tl064ipwr.lbr+9−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments FET InputAmplifiers, TSSOP-14</description> <packages> <package name="TSSOP-14_4.4x5mm_P0.65mm"> <description>TSSOP-14, 4.4 x 5 mm, 0.65 mm pitch</description>@@ -92,6 +92,7 @@ </packages> <symbols> <symbol name="TL064IPWR">+ <description>Texas Instruments FET InputAmplifiers, TSSOP-14</description> <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/> <wire x1="12.7" y1="10.16" x2="12.7" y2="-10.16" width="0.254" layer="94"/> <wire x1="12.7" y1="-10.16" x2="-12.7" y2="-10.16" width="0.254" layer="94"/>@@ -116,7 +117,7 @@ </symbols> <devicesets> <deviceset name="TL064IPWR" prefix="U">- <description></description>+ <description>Texas Instruments FET InputAmplifiers, TSSOP-14</description> <gates> <gate name="G$1" symbol="TL064IPWR" x="0" y="0"/> </gates>@@ -138,7 +139,12 @@ <connect gate="G$1" pin="3IN-" pad="9"/> <connect gate="G$1" pin="3OUT" pad="8"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="TL064IPWR" constant="no"/>+ <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>