component
TL062CDT
Public Made by Adomby adom
STMicroelectronics FET InputAmplifiers, SO-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -32,19 +32,19 @@ "number": "1", "name": "OUT1", "type": "output",- "description": "Output of op-amp channel 1. Push-pull output with short-circuit protection to ground or either supply; typical output swing 27 V p-p into 10 k\u03a9 at VCC = \u00b115 V."+ "description": "Output of op-amp channel 1. Push-pull output with short-circuit protection to ground or either supply; typical output swing 27 V p-p into 10 kΩ at VCC = ±15 V." }, { "number": "2", "name": "IN1-", "type": "input",- "description": "Inverting input of op-amp channel 1. High-impedance JFET gate input (typ. 10^12 \u03a9); input bias current 30 pA typ. Differential input voltage rating \u00b130 V."+ "description": "Inverting input of op-amp channel 1. High-impedance JFET gate input (typ. 10^12 Ω); input bias current 30 pA typ. Differential input voltage rating ±30 V." }, { "number": "3", "name": "IN1+", "type": "input",- "description": "Non-inverting input of op-amp channel 1. High-impedance JFET gate input; common-mode range typ. +15/-12 V at VCC = \u00b115 V. Input voltage must not exceed the magnitude of the supply or 15 V."+ "description": "Non-inverting input of op-amp channel 1. High-impedance JFET gate input; common-mode range typ. +15/-12 V at VCC = ±15 V. Input voltage must not exceed the magnitude of the supply or 15 V." }, { "number": "4",@@ -56,25 +56,25 @@ "number": "5", "name": "IN2+", "type": "input",- "description": "Non-inverting input of op-amp channel 2. High-impedance JFET gate input; common-mode range typ. +15/-12 V at VCC = \u00b115 V."+ "description": "Non-inverting input of op-amp channel 2. High-impedance JFET gate input; common-mode range typ. +15/-12 V at VCC = ±15 V." }, { "number": "6", "name": "IN2-", "type": "input",- "description": "Inverting input of op-amp channel 2. High-impedance JFET gate input (typ. 10^12 \u03a9); input bias current 30 pA typ."+ "description": "Inverting input of op-amp channel 2. High-impedance JFET gate input (typ. 10^12 Ω); input bias current 30 pA typ." }, { "number": "7", "name": "OUT2", "type": "output",- "description": "Output of op-amp channel 2. Push-pull output with short-circuit protection; typical output swing 27 V p-p into 10 k\u03a9 at VCC = \u00b115 V. Slew rate 3.5 V/\u00b5s typ."+ "description": "Output of op-amp channel 2. Push-pull output with short-circuit protection; typical output swing 27 V p-p into 10 kΩ at VCC = ±15 V. Slew rate 3.5 V/µs typ." }, { "number": "8", "name": "VCC+", "type": "power_in",- "description": "Positive supply rail. Absolute maximum \u00b118 V; total supply 6 V to 36 V. Supply current only 200 \u00b5A typ. (250 \u00b5A max) for both channels with no load."+ "description": "Positive supply rail. Absolute maximum ±18 V; total supply 6 V to 36 V. Supply current only 200 µA typ. (250 µA max) for both channels with no load." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/tl062cdt-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }