component
TJ4320GDP-ADJ
Public Made by Adomby adom
HTC Korea TAEJIN Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -38,13 +38,13 @@ "number": "2", "name": "EN", "type": "input",- "description": "Chip enable. Pulling this pin below 0.4 V (VIL) turns the regulator off; VIH \u2265 2.0 V enables the device. Do not float. Enable input current ~0.1 \u00b5A (max 1 \u00b5A)."+ "description": "Chip enable. Pulling this pin below 0.4 V (VIL) turns the regulator off; VIH ≥ 2.0 V enables the device. Do not float. Enable input current ~0.1 µA (max 1 µA)." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Input supply pin. Recommended operating range 2.5 V to 5.5 V (absolute max 6.5 V). Requires a low-ESR ceramic bypass capacitor (\u226510 \u00b5F recommended) placed close to the pin."+ "description": "Input supply pin. Recommended operating range 2.5 V to 5.5 V (absolute max 6.5 V). Requires a low-ESR ceramic bypass capacitor (≥10 µF recommended) placed close to the pin." }, { "number": "4",@@ -56,25 +56,25 @@ "number": "5", "name": "SS", "type": "passive",- "description": "Soft-start. Connect an external capacitor (CSS) between this pin and ground to set the soft-start time (e.g. 220 pF \u2248 0.23 ms, 10 nF \u2248 10.4 ms). Internal ~130 nA current source charges CSS against a ~450 k\u03a9 / 0.6 V reference. Do not tie directly to ground."+ "description": "Soft-start. Connect an external capacitor (CSS) between this pin and ground to set the soft-start time (e.g. 220 pF ≈ 0.23 ms, 10 nF ≈ 10.4 ms). Internal ~130 nA current source charges CSS against a ~450 kΩ / 0.6 V reference. Do not tie directly to ground." }, { "number": "6", "name": "VOUT", "type": "power_out",- "description": "Regulated output voltage, up to 2 A continuous. Requires a low-ESR ceramic output capacitor (\u226510 \u00b5F recommended). An auto-discharge path (~330 \u03a9) pulls VOUT down when EN goes low."+ "description": "Regulated output voltage, up to 2 A continuous. Requires a low-ESR ceramic output capacitor (≥10 µF recommended). An auto-discharge path (~330 Ω) pulls VOUT down when EN goes low." }, { "number": "7", "name": "ADJ", "type": "input",- "description": "Output adjust / feedback input for the adjustable version. Regulates to VADJ \u2248 0.6 V (min 0.582 V, max 0.618 V over temperature). Set VOUT with an external resistor divider using R2 = R1 \u00d7 (VOUT/0.6 \u2212 1); recommended R1 in the 1 k\u03a9 to 100 k\u03a9 range. A 2.2 nF to 1 \u00b5F feed-forward capacitor from VOUT to ADJ improves PSRR."+ "description": "Output adjust / feedback input for the adjustable version. Regulates to VADJ ≈ 0.6 V (min 0.582 V, max 0.618 V over temperature). Set VOUT with an external resistor divider using R2 = R1 × (VOUT/0.6 − 1); recommended R1 in the 1 kΩ to 100 kΩ range. A 2.2 nF to 1 µF feed-forward capacitor from VOUT to ADJ improves PSRR." }, { "number": "8", "name": "GND", "type": "power_in",- "description": "Device ground / return. Ground pin quiescent current ~0.2 mA at 200 mA load and ~0.3 mA at 2 A load; standby current ~0.1 \u00b5A when disabled."+ "description": "Device ground / return. Ground pin quiescent current ~0.2 mA at 200 mA load and ~0.3 mA at 2 A load; standby current ~0.1 µA when disabled." }, { "number": "9",@@ -144,5 +144,8 @@ "docs/tj4320gdp-adj-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }