component
THVD8000
Public Made by Adomby adom
TI RS-485 transceiver with FSK modulation, SOT-23-8. Carries data over DC power or shared lines. Datasheet-verified.
← Commit history
thvd8000: backfill missing artifacts (etch, variants)
3 files changed
+22480−7
diff truncated
README.md+2@@ -31,6 +31,8 @@ RS-485 transceiver that modulates the data onto an FSK carrier, so the different ## Ordering variants +Same part, different packaging or reel option.+ - `THVD8000DDFR (SOT-23-8)` - `THVD8010DDFR (higher data rate)`
page.json+18−7@@ -36,25 +36,25 @@ "number": "1", "name": "R", "type": "output",- "description": "Receive data output. CMOS digital output that recovers demodulated data from the RS-485 bus (OOK-demodulated). VOH \u2265 VCC\u22120.4 V @ IOH = \u22124 mA; VOL \u2264 0.4 V @ IOL = 4 mA. High-Z when MODE = high (transmit mode)."+ "description": "Receive data output. CMOS digital output that recovers demodulated data from the RS-485 bus (OOK-demodulated). VOH ≥ VCC−0.4 V @ IOH = −4 mA; VOL ≤ 0.4 V @ IOL = 4 mA. High-Z when MODE = high (transmit mode)." }, { "number": "2", "name": "MODE", "type": "input",- "description": "Transmit/receive mode selection digital input. Low = receive mode; High = transmit mode. Internal 2-M\u03a9 pull-down to GND (defaults to receive if left floating)."+ "description": "Transmit/receive mode selection digital input. Low = receive mode; High = transmit mode. Internal 2-MΩ pull-down to GND (defaults to receive if left floating)." }, { "number": "3", "name": "F_SET", "type": "input",- "description": "Carrier frequency selection analog input. Connect a resistor RF_SET (1.5 k\u03a9 to 80 k\u03a9) from this pin to GND to set the OOK carrier frequency f0 (125 kHz to 5 MHz). Recommended load capacitance \u2264 100 pF."+ "description": "Carrier frequency selection analog input. Connect a resistor RF_SET (1.5 kΩ to 80 kΩ) from this pin to GND to set the OOK carrier frequency f0 (125 kHz to 5 MHz). Recommended load capacitance ≤ 100 pF." }, { "number": "4", "name": "D", "type": "input",- "description": "Driver data input. CMOS logic input carrying the transmit data that will be OOK-modulated onto the A/B bus. Internal 2-M\u03a9 pull-up to VCC. VIH \u2265 2 V, VIL \u2264 0.8 V."+ "description": "Driver data input. CMOS logic input carrying the transmit data that will be OOK-modulated onto the A/B bus. Internal 2-MΩ pull-up to VCC. VIH ≥ 2 V, VIL ≤ 0.8 V." }, { "number": "5",@@ -66,13 +66,13 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "RS-485 differential bus I/O port A (complementary to B). Operational common-mode range \u22127 V to 12 V; withstands \u00b118-V DC fault and \u00b116-kV HBM ESD. Driver short-circuit current limited to \u00b1250 mA."+ "description": "RS-485 differential bus I/O port A (complementary to B). Operational common-mode range −7 V to 12 V; withstands ±18-V DC fault and ±16-kV HBM ESD. Driver short-circuit current limited to ±250 mA." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "RS-485 differential bus I/O port B (complementary to A). Operational common-mode range \u22127 V to 12 V; withstands \u00b118-V DC fault and \u00b116-kV HBM ESD. Driver short-circuit current limited to \u00b1250 mA."+ "description": "RS-485 differential bus I/O port B (complementary to A). Operational common-mode range −7 V to 12 V; withstands ±18-V DC fault and ±16-kV HBM ESD. Driver short-circuit current limited to ±250 mA." }, { "number": "8",@@ -147,6 +147,17 @@ "docs/hero.png", "docs/thvd8000-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "thvd8000-etched.step"+ ],+ "variants": [+ {+ "mpn": "THVD8000DDFR (SOT-23-8)",+ "kind": "packaging"+ },+ {+ "mpn": "THVD8010DDFR (higher data rate)",+ "kind": "unknown"+ } ] }
thvd8000-etched.stepadded+22460@@ -0,0 +1,43612 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-09-04T00:35:12',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('part','part','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('body','body','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#22083);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#156,#235,#538,#617,#696,#775,#1073,#1156,+ #2396,#2469,#5071,#5147,#5552,#5634,#6147,#6223,#6386,#6413,#6440,+ #6467,#6494,#6521,#6548,#6555,#6582,#6609,#6636,#6663,#6690,#6717,+ #6724,#6751,#6778,#6805,#6832,#6859,#6886,#6893,#6969,#7374,#7456,+ #7969,#8045,#8208,#8235,#8262,#8289,#8316,#8343,#8370,#8377,#8404,+ #8431,#8458,#8485,#8512,#8539,#8546,#8573,#8600,#8627,#8654,#8681,+ #8708,#8715,#8791,#9196,#9278,#9791,#9867,#10030,#10057,#10084,+ #10111,#10138,#10165,#10192,#10199,#10226,#10253,#10280,#10307,+ #10334,#10361,#10368,#10395,#10422,#10449,#10476,#10503,#10530,+ #10537,#10613,#11444,#11526,#11731,#11758,#11785,#11812,#11839,+ #11866,#11893,#11900,#11982,#12187,#12214,#12241,#12268,#12295,+ #12322,#12349,#12356,#12383,#12410,#12437,#12464,#12491,#12518,+ #12545,#12572,#12599,#12626,#12653,#12680,#12707,#12734,#12741,+ #12817,#13163,#13237,#13397,#13424,#13451,#13478,#13505,#13532,+ #13539,#13566,#13593,#13620,#13647,#13674,#13681,#13757,#13897,+ #13924,#13951,#13978,#14005,#14032,#14039,#14115,#14370,#14397,+ #14424,#14451,#14478,#14505,#14532,#14559,#14586,#14613,#14640,+ #14647,#14723,#14886,#14913,#14940,#14967,#14994,#15021,#15048,+ #15055,#15081,#15107,#15133,#15159,#15185,#15211,#15218,#15523,+ #15594,#15648,#15697,#15746,#15795,#15845,#15894,#15948,#15976,+ #16031,#16336,#16407,#16461,#16510,#16559,#16608,#16658,#16707,+ #16761,#16789,#16844,#17149,#17220,#17274,#17323,#17372,#17421,+ #17471,#17520,#17574,#17602,#17657,#17962,#18033,#18087,#18136,+ #18185,#18234,#18284,#18333,#18387,#18415,#18470,#18775,#18846,+ #18922,#18971,#19020,#19069,#19119,#19168,#19222,#19250,#19305,+ #19610,#19681,#19735,#19784,#19833,#19882,#19932,#19981,#20035,+ #20063,#20118,#20423,#20494,#20548,#20597,#20646,#20695,#20745,+ #20794,#20848,#20876,#20931,#21236,#21307,#21383,#21432,#21481,+ #21530,#21580,#21629,#21683,#21711,#21746,#21790,#21797,#21804,+ #21811,#21818,#21825,#21832,#21839,#21863,#21887,#21911,#21935,+ #21942,#21949,#21956,#21963,#21970,#21977,#21984,#21991,#22015,+ #22039,#22046,#22072));+#39 = ADVANCED_FACE('',(#40),#54,.F.);+#40 = FACE_BOUND('',#41,.F.);+#41 = EDGE_LOOP('',(#42,#76,#103,#131));+#42 = ORIENTED_EDGE('',*,*,#43,.T.);+#43 = EDGE_CURVE('',#44,#46,#48,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-0.671621551758,1.383243103516,0.1));+#46 = VERTEX_POINT('',#47);+#47 = CARTESIAN_POINT('',(0.671621551758,1.383243103516,0.1));+#48 = SURFACE_CURVE('',#49,(#53,#64),.PCURVE_S1.);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(-0.671621551758,1.383243103516,0.1));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(1.,1.110223024625E-16,0.));+#53 = PCURVE('',#54,#59);+#54 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#55,#56)+ ,(#57,#58)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#55 = CARTESIAN_POINT('',(-0.671621551758,1.383243103516,0.1));+#56 = CARTESIAN_POINT('',(-0.705,1.45,0.575));+#57 = CARTESIAN_POINT('',(0.671621551758,1.383243103516,0.1));+#58 = CARTESIAN_POINT('',(0.705,1.45,0.575));+#59 = DEFINITIONAL_REPRESENTATION('',(#60),#63);+#60 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61,#62),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.343243103516),.PIECEWISE_BEZIER_KNOTS.);+#61 = CARTESIAN_POINT('',(-9.845391426741E-17,-2.881104484236E-17));+#62 = CARTESIAN_POINT('',(1.41,4.270105424372E-17));+#63 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#64 = PCURVE('',#65,#70);+#65 = PLANE('',#66);+#66 = AXIS2_PLACEMENT_3D('',#67,#68,#69);+#67 = CARTESIAN_POINT('',(-0.671621551758,1.383243103516,0.1));+#68 = DIRECTION('',(0.,0.,1.));+#69 = DIRECTION('',(0.436777995774,-0.899569331629,0.));+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);+#71 = LINE('',#72,#73);+#72 = CARTESIAN_POINT('',(0.,0.));+#73 = VECTOR('',#74,1.);+#74 = DIRECTION('',(0.436777995774,0.899569331629));+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#76 = ORIENTED_EDGE('',*,*,#77,.T.);+#77 = EDGE_CURVE('',#46,#78,#80,.T.);+#78 = VERTEX_POINT('',#79);+#79 = CARTESIAN_POINT('',(0.705,1.45,0.575));+#80 = SURFACE_CURVE('',#81,(#84,#91),.PCURVE_S1.);+#81 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82,#83),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#82 = CARTESIAN_POINT('',(0.671621551758,1.383243103516,0.1));+#83 = CARTESIAN_POINT('',(0.705,1.45,0.575));+#84 = PCURVE('',#54,#85);+#85 = DEFINITIONAL_REPRESENTATION('',(#86),#90);+#86 = LINE('',#87,#88);+#87 = CARTESIAN_POINT('',(1.41,-7.190094007973E-17));+#88 = VECTOR('',#89,1.);+#89 = DIRECTION('',(0.,1.));+#90 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#91 = PCURVE('',#92,#97);+#92 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#93,#94)+ ,(#95,#96+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#93 = CARTESIAN_POINT('',(0.671621551758,1.383243103516,0.1));+#94 = CARTESIAN_POINT('',(0.705,1.45,0.575));+#95 = CARTESIAN_POINT('',(0.733243103516,1.321621551758,0.1));+#96 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#97 = DEFINITIONAL_REPRESENTATION('',(#98),#102);+#98 = LINE('',#99,#100);+#99 = CARTESIAN_POINT('',(1.694091357196E-16,-4.078708212487E-17));+#100 = VECTOR('',#101,1.);+#101 = DIRECTION('',(-3.013232771107E-16,1.));+#102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#103 = ORIENTED_EDGE('',*,*,#104,.F.);+#104 = EDGE_CURVE('',#105,#78,#107,.T.);+#105 = VERTEX_POINT('',#106);+#106 = CARTESIAN_POINT('',(-0.705,1.45,0.575));+#107 = SURFACE_CURVE('',#108,(#112,#119),.PCURVE_S1.);+#108 = LINE('',#109,#110);+#109 = CARTESIAN_POINT('',(-0.705,1.45,0.575));+#110 = VECTOR('',#111,1.);+#111 = DIRECTION('',(1.,1.110223024625E-16,0.));+#112 = PCURVE('',#54,#113);+#113 = DEFINITIONAL_REPRESENTATION('',(#114),#118);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-4.075942208407E-17,1.));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(1.,7.873922160462E-17));+#118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#119 = PCURVE('',#120,#125);+#120 = PLANE('',#121);+#121 = AXIS2_PLACEMENT_3D('',#122,#123,#124);+#122 = CARTESIAN_POINT('',(-0.705,1.45,0.725));+#123 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#124 = DIRECTION('',(1.,1.110223024625E-16,0.));+#125 = DEFINITIONAL_REPRESENTATION('',(#126),#130);+#126 = LINE('',#127,#128);+#127 = CARTESIAN_POINT('',(0.,-0.15));+#128 = VECTOR('',#129,1.);+#129 = DIRECTION('',(1.,0.));+#130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#131 = ORIENTED_EDGE('',*,*,#132,.F.);+#132 = EDGE_CURVE('',#44,#105,#133,.T.);+#133 = SURFACE_CURVE('',#134,(#137,#144),.PCURVE_S1.);+#134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#136),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#135 = CARTESIAN_POINT('',(-0.671621551758,1.383243103516,0.1));+#136 = CARTESIAN_POINT('',(-0.705,1.45,0.575));+#137 = PCURVE('',#54,#138);+#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);+#139 = LINE('',#140,#141);+#140 = CARTESIAN_POINT('',(-9.845391426741E-17,-2.881104484236E-17));+#141 = VECTOR('',#142,1.);+#142 = DIRECTION('',(5.984490003858E-17,1.));+#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#144 = PCURVE('',#145,#150);+#145 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#146,#147)+ ,(#148,#149+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#146 = CARTESIAN_POINT('',(-0.733243103516,1.321621551758,0.1));+#147 = CARTESIAN_POINT('',(-0.8,1.355,0.575));+#148 = CARTESIAN_POINT('',(-0.671621551758,1.383243103516,0.1));+#149 = CARTESIAN_POINT('',(-0.705,1.45,0.575));+#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);+#151 = LINE('',#152,#153);+#152 = CARTESIAN_POINT('',(0.134350288425,-7.739073835562E-18));+#153 = VECTOR('',#154,1.);+#154 = DIRECTION('',(2.498001805407E-16,1.));+#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#156 = ADVANCED_FACE('',(#157),#145,.F.);+#157 = FACE_BOUND('',#158,.F.);+#158 = EDGE_LOOP('',(#159,#181,#182,#210));+#159 = ORIENTED_EDGE('',*,*,#160,.T.);+#160 = EDGE_CURVE('',#161,#44,#163,.T.);+#161 = VERTEX_POINT('',#162);+#162 = CARTESIAN_POINT('',(-0.733243103516,1.321621551758,0.1));+#163 = SURFACE_CURVE('',#164,(#168,#174),.PCURVE_S1.);+#164 = LINE('',#165,#166);+#165 = CARTESIAN_POINT('',(-0.733243103516,1.321621551758,0.1));+#166 = VECTOR('',#167,1.);+#167 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#168 = PCURVE('',#145,#169);+#169 = DEFINITIONAL_REPRESENTATION('',(#170),#173);+#170 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#171,#172),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,8.714603423064E-02),.PIECEWISE_BEZIER_KNOTS.);+#171 = CARTESIAN_POINT('',(-3.147409345358E-16,-4.075997580394E-17));+#172 = CARTESIAN_POINT('',(0.134350288425,-6.490167211522E-17));+#173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#174 = PCURVE('',#65,#175);+#175 = DEFINITIONAL_REPRESENTATION('',(#176),#180);+#176 = LINE('',#177,#178);+#177 = CARTESIAN_POINT('',(2.851792025555E-02,-8.234779600224E-02));+#178 = VECTOR('',#179,1.);+#179 = DIRECTION('',(-0.327242891857,0.944940257227));+#180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#181 = ORIENTED_EDGE('',*,*,#132,.T.);+#182 = ORIENTED_EDGE('',*,*,#183,.F.);+#183 = EDGE_CURVE('',#184,#105,#186,.T.);+#184 = VERTEX_POINT('',#185);+#185 = CARTESIAN_POINT('',(-0.8,1.355,0.575));+#186 = SURFACE_CURVE('',#187,(#191,#198),.PCURVE_S1.);+#187 = LINE('',#188,#189);+#188 = CARTESIAN_POINT('',(-0.8,1.355,0.575));+#189 = VECTOR('',#190,1.);+#190 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#191 = PCURVE('',#145,#192);+#192 = DEFINITIONAL_REPRESENTATION('',(#193),#197);+#193 = LINE('',#194,#195);+#194 = CARTESIAN_POINT('',(1.064990263496E-16,1.));+#195 = VECTOR('',#196,1.);+#196 = DIRECTION('',(1.,0.));+#197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#198 = PCURVE('',#199,#204);+#199 = PLANE('',#200);+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);+#201 = CARTESIAN_POINT('',(-0.8,1.355,0.725));+#202 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#203 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#204 = DEFINITIONAL_REPRESENTATION('',(#205),#209);+#205 = LINE('',#206,#207);+#206 = CARTESIAN_POINT('',(0.,-0.15));+#207 = VECTOR('',#208,1.);+#208 = DIRECTION('',(1.,0.));+#209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#210 = ORIENTED_EDGE('',*,*,#211,.F.);+#211 = EDGE_CURVE('',#161,#184,#212,.T.);+#212 = SURFACE_CURVE('',#213,(#216,#223),.PCURVE_S1.);+#213 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#214,#215),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#214 = CARTESIAN_POINT('',(-0.733243103516,1.321621551758,0.1));+#215 = CARTESIAN_POINT('',(-0.8,1.355,0.575));+#216 = PCURVE('',#145,#217);+#217 = DEFINITIONAL_REPRESENTATION('',(#218),#222);+#218 = LINE('',#219,#220);+#219 = CARTESIAN_POINT('',(-3.147409345358E-16,-4.075997580394E-17));+#220 = VECTOR('',#221,1.);+#221 = DIRECTION('',(3.433041737095E-16,1.));+#222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#223 = PCURVE('',#224,#229);+#224 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#225,#226)+ ,(#227,#228+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#225 = CARTESIAN_POINT('',(-0.733243103516,-1.321621551758,0.1));+#226 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#227 = CARTESIAN_POINT('',(-0.733243103516,1.321621551758,0.1));+#228 = CARTESIAN_POINT('',(-0.8,1.355,0.575));+#229 = DEFINITIONAL_REPRESENTATION('',(#230),#234);+#230 = LINE('',#231,#232);+#231 = CARTESIAN_POINT('',(2.71,-4.811329775014E-17));+#232 = VECTOR('',#233,1.);+#233 = DIRECTION('',(4.440892098501E-16,1.));+#234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#235 = ADVANCED_FACE('',(#236),#224,.F.);+#236 = FACE_BOUND('',#237,.F.);+#237 = EDGE_LOOP('',(#238,#260,#261,#289,#317,#345,#373,#401,#429,#457,+ #485,#513));+#238 = ORIENTED_EDGE('',*,*,#239,.T.);+#239 = EDGE_CURVE('',#240,#161,#242,.T.);+#240 = VERTEX_POINT('',#241);+#241 = CARTESIAN_POINT('',(-0.733243103516,-1.321621551758,0.1));+#242 = SURFACE_CURVE('',#243,(#247,#253),.PCURVE_S1.);+#243 = LINE('',#244,#245);+#244 = CARTESIAN_POINT('',(-0.733243103516,-1.321621551758,0.1));+#245 = VECTOR('',#246,1.);+#246 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#247 = PCURVE('',#224,#248);+#248 = DEFINITIONAL_REPRESENTATION('',(#249),#252);+#249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#250,#251),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,2.643243103516),.PIECEWISE_BEZIER_KNOTS.);+#250 = CARTESIAN_POINT('',(3.109465121026E-16,-6.969422327902E-17));+#251 = CARTESIAN_POINT('',(2.71,6.648869657331E-17));+#252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#253 = PCURVE('',#65,#254);+#254 = DEFINITIONAL_REPRESENTATION('',(#255),#259);+#255 = LINE('',#256,#257);+#256 = CARTESIAN_POINT('',(2.406298352219,-1.2368582211));+#257 = VECTOR('',#258,1.);+#258 = DIRECTION('',(-0.899569331629,0.436777995774));+#259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#260 = ORIENTED_EDGE('',*,*,#211,.T.);+#261 = ORIENTED_EDGE('',*,*,#262,.F.);+#262 = EDGE_CURVE('',#263,#184,#265,.T.);+#263 = VERTEX_POINT('',#264);+#264 = CARTESIAN_POINT('',(-0.8,1.165,0.575));+#265 = SURFACE_CURVE('',#266,(#270,#277),.PCURVE_S1.);+#266 = LINE('',#267,#268);+#267 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#268 = VECTOR('',#269,1.);+#269 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#270 = PCURVE('',#224,#271);+#271 = DEFINITIONAL_REPRESENTATION('',(#272),#276);+#272 = LINE('',#273,#274);+#273 = CARTESIAN_POINT('',(0.,1.));+#274 = VECTOR('',#275,1.);+#275 = DIRECTION('',(1.,0.));+#276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#277 = PCURVE('',#278,#283);+#278 = PLANE('',#279);+#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282);+#280 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#281 = DIRECTION('',(1.,1.110223024625E-16,0.));+#282 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#283 = DEFINITIONAL_REPRESENTATION('',(#284),#288);+#284 = LINE('',#285,#286);+#285 = CARTESIAN_POINT('',(0.,-0.15));+#286 = VECTOR('',#287,1.);+#287 = DIRECTION('',(1.,0.));+#288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#289 = ORIENTED_EDGE('',*,*,#290,.F.);+#290 = EDGE_CURVE('',#291,#263,#293,.T.);+#291 = VERTEX_POINT('',#292);+#292 = CARTESIAN_POINT('',(-0.8,0.785,0.575));+#293 = SURFACE_CURVE('',#294,(#298,#305),.PCURVE_S1.);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#298 = PCURVE('',#224,#299);+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#304);+#300 = LINE('',#301,#302);+#301 = CARTESIAN_POINT('',(0.,1.));+#302 = VECTOR('',#303,1.);+#303 = DIRECTION('',(1.,0.));+#304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#305 = PCURVE('',#306,#311);+#306 = PLANE('',#307);+#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310);+#308 = CARTESIAN_POINT('',(-0.75,0.785,0.575));+#309 = DIRECTION('',(0.,0.,1.));+#310 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#311 = DEFINITIONAL_REPRESENTATION('',(#312),#316);+#312 = LINE('',#313,#314);+#313 = CARTESIAN_POINT('',(5.E-02,2.14));+#314 = VECTOR('',#315,1.);+#315 = DIRECTION('',(1.224646799147E-16,-1.));+#316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#317 = ORIENTED_EDGE('',*,*,#318,.F.);+#318 = EDGE_CURVE('',#319,#291,#321,.T.);+#319 = VERTEX_POINT('',#320);+#320 = CARTESIAN_POINT('',(-0.8,0.515,0.575));+#321 = SURFACE_CURVE('',#322,(#326,#333),.PCURVE_S1.);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#326 = PCURVE('',#224,#327);+#327 = DEFINITIONAL_REPRESENTATION('',(#328),#332);+#328 = LINE('',#329,#330);+#329 = CARTESIAN_POINT('',(0.,1.));+#330 = VECTOR('',#331,1.);+#331 = DIRECTION('',(1.,0.));+#332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#333 = PCURVE('',#334,#339);+#334 = PLANE('',#335);+#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338);+#336 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#337 = DIRECTION('',(1.,1.110223024625E-16,0.));+#338 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#339 = DEFINITIONAL_REPRESENTATION('',(#340),#344);+#340 = LINE('',#341,#342);+#341 = CARTESIAN_POINT('',(0.,-0.15));+#342 = VECTOR('',#343,1.);+#343 = DIRECTION('',(1.,0.));+#344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#345 = ORIENTED_EDGE('',*,*,#346,.F.);+#346 = EDGE_CURVE('',#347,#319,#349,.T.);+#347 = VERTEX_POINT('',#348);+#348 = CARTESIAN_POINT('',(-0.8,0.135,0.575));+#349 = SURFACE_CURVE('',#350,(#354,#361),.PCURVE_S1.);+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#354 = PCURVE('',#224,#355);+#355 = DEFINITIONAL_REPRESENTATION('',(#356),#360);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(0.,1.));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(1.,0.));+#360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#361 = PCURVE('',#362,#367);+#362 = PLANE('',#363);+#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366);+#364 = CARTESIAN_POINT('',(-0.75,0.135,0.575));+#365 = DIRECTION('',(0.,0.,1.));+#366 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#367 = DEFINITIONAL_REPRESENTATION('',(#368),#372);+#368 = LINE('',#369,#370);+#369 = CARTESIAN_POINT('',(5.E-02,1.49));+#370 = VECTOR('',#371,1.);+#371 = DIRECTION('',(1.224646799147E-16,-1.));+#372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#373 = ORIENTED_EDGE('',*,*,#374,.F.);+#374 = EDGE_CURVE('',#375,#347,#377,.T.);+#375 = VERTEX_POINT('',#376);+#376 = CARTESIAN_POINT('',(-0.8,-0.135,0.575));+#377 = SURFACE_CURVE('',#378,(#382,#389),.PCURVE_S1.);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#382 = PCURVE('',#224,#383);+#383 = DEFINITIONAL_REPRESENTATION('',(#384),#388);+#384 = LINE('',#385,#386);+#385 = CARTESIAN_POINT('',(0.,1.));+#386 = VECTOR('',#387,1.);+#387 = DIRECTION('',(1.,0.));+#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#389 = PCURVE('',#390,#395);+#390 = PLANE('',#391);+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);+#392 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#393 = DIRECTION('',(1.,1.110223024625E-16,0.));+#394 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,-0.15));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(1.,0.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = ORIENTED_EDGE('',*,*,#402,.F.);+#402 = EDGE_CURVE('',#403,#375,#405,.T.);+#403 = VERTEX_POINT('',#404);+#404 = CARTESIAN_POINT('',(-0.8,-0.515,0.575));+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#410 = PCURVE('',#224,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(0.,1.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(1.,0.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(-0.75,-0.515,0.575));+#421 = DIRECTION('',(0.,0.,1.));+#422 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(5.E-02,0.84));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.224646799147E-16,-1.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ORIENTED_EDGE('',*,*,#430,.F.);+#430 = EDGE_CURVE('',#431,#403,#433,.T.);+#431 = VERTEX_POINT('',#432);+#432 = CARTESIAN_POINT('',(-0.8,-0.785,0.575));+#433 = SURFACE_CURVE('',#434,(#438,#445),.PCURVE_S1.);+#434 = LINE('',#435,#436);+#435 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#436 = VECTOR('',#437,1.);+#437 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#438 = PCURVE('',#224,#439);+#439 = DEFINITIONAL_REPRESENTATION('',(#440),#444);+#440 = LINE('',#441,#442);+#441 = CARTESIAN_POINT('',(-1.110223024625E-16,1.));+#442 = VECTOR('',#443,1.);+#443 = DIRECTION('',(1.,0.));+#444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#445 = PCURVE('',#446,#451);+#446 = PLANE('',#447);+#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450);+#448 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#449 = DIRECTION('',(1.,1.110223024625E-16,0.));+#450 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.,-0.15));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(1.,0.));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#459,#431,#461,.T.);+#459 = VERTEX_POINT('',#460);+#460 = CARTESIAN_POINT('',(-0.8,-1.165,0.575));+#461 = SURFACE_CURVE('',#462,(#466,#473),.PCURVE_S1.);+#462 = LINE('',#463,#464);+#463 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#464 = VECTOR('',#465,1.);+#465 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#466 = PCURVE('',#224,#467);+#467 = DEFINITIONAL_REPRESENTATION('',(#468),#472);+#468 = LINE('',#469,#470);+#469 = CARTESIAN_POINT('',(-8.326672684689E-17,1.));+#470 = VECTOR('',#471,1.);+#471 = DIRECTION('',(1.,2.921639538487E-16));+#472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#473 = PCURVE('',#474,#479);+#474 = PLANE('',#475);+#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478);+#476 = CARTESIAN_POINT('',(-0.75,-1.165,0.575));+#477 = DIRECTION('',(0.,0.,1.));+#478 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#479 = DEFINITIONAL_REPRESENTATION('',(#480),#484);+#480 = LINE('',#481,#482);+#481 = CARTESIAN_POINT('',(5.E-02,0.19));+#482 = VECTOR('',#483,1.);+#483 = DIRECTION('',(1.224646799147E-16,-1.));+#484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#485 = ORIENTED_EDGE('',*,*,#486,.F.);+#486 = EDGE_CURVE('',#487,#459,#489,.T.);+#487 = VERTEX_POINT('',#488);+#488 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#489 = SURFACE_CURVE('',#490,(#494,#501),.PCURVE_S1.);+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#494 = PCURVE('',#224,#495);+#495 = DEFINITIONAL_REPRESENTATION('',(#496),#500);+#496 = LINE('',#497,#498);+#497 = CARTESIAN_POINT('',(-1.817795570534E-18,1.));+#498 = VECTOR('',#499,1.);+#499 = DIRECTION('',(1.,-5.843279076975E-16));+#500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#501 = PCURVE('',#502,#507);+#502 = PLANE('',#503);+#503 = AXIS2_PLACEMENT_3D('',#504,#505,#506);+#504 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#505 = DIRECTION('',(1.,1.110223024625E-16,0.));+#506 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#507 = DEFINITIONAL_REPRESENTATION('',(#508),#512);+#508 = LINE('',#509,#510);+#509 = CARTESIAN_POINT('',(0.,-0.15));+#510 = VECTOR('',#511,1.);+#511 = DIRECTION('',(1.,0.));+#512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#513 = ORIENTED_EDGE('',*,*,#514,.F.);+#514 = EDGE_CURVE('',#240,#487,#515,.T.);+#515 = SURFACE_CURVE('',#516,(#519,#526),.PCURVE_S1.);+#516 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#517,#518),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#517 = CARTESIAN_POINT('',(-0.733243103516,-1.321621551758,0.1));+#518 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#519 = PCURVE('',#224,#520);+#520 = DEFINITIONAL_REPRESENTATION('',(#521),#525);+#521 = LINE('',#522,#523);+#522 = CARTESIAN_POINT('',(3.109465121026E-16,-6.969422327902E-17));+#523 = VECTOR('',#524,1.);+#524 = DIRECTION('',(-3.127643076732E-16,1.));+#525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#526 = PCURVE('',#527,#532);+#527 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#528,#529)+ ,(#530,#531+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#528 = CARTESIAN_POINT('',(-0.671621551758,-1.383243103516,0.1));+#529 = CARTESIAN_POINT('',(-0.705,-1.45,0.575));+#530 = CARTESIAN_POINT('',(-0.733243103516,-1.321621551758,0.1));+#531 = CARTESIAN_POINT('',(-0.8,-1.355,0.575));+#532 = DEFINITIONAL_REPRESENTATION('',(#533),#537);+#533 = LINE('',#534,#535);+#534 = CARTESIAN_POINT('',(0.134350288425,-1.550898165166E-16));+#535 = VECTOR('',#536,1.);+#536 = DIRECTION('',(-3.330669073875E-16,1.));+#537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#538 = ADVANCED_FACE('',(#539),#527,.F.);+#539 = FACE_BOUND('',#540,.F.);+#540 = EDGE_LOOP('',(#541,#563,#564,#592));+#541 = ORIENTED_EDGE('',*,*,#542,.T.);+#542 = EDGE_CURVE('',#543,#240,#545,.T.);+#543 = VERTEX_POINT('',#544);+#544 = CARTESIAN_POINT('',(-0.671621551758,-1.383243103516,0.1));+#545 = SURFACE_CURVE('',#546,(#550,#556),.PCURVE_S1.);+#546 = LINE('',#547,#548);+#547 = CARTESIAN_POINT('',(-0.671621551758,-1.383243103516,0.1));+#548 = VECTOR('',#549,1.);+#549 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#550 = PCURVE('',#527,#551);+#551 = DEFINITIONAL_REPRESENTATION('',(#552),#555);+#552 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#553,#554),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,8.714603423064E-02),.PIECEWISE_BEZIER_KNOTS.);+#553 = CARTESIAN_POINT('',(1.694091357196E-16,-4.078708212487E-17));+#554 = CARTESIAN_POINT('',(0.134350288425,-4.972514258084E-17));+#555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#556 = PCURVE('',#65,#557);+#557 = DEFINITIONAL_REPRESENTATION('',(#558),#562);+#558 = LINE('',#559,#560);+#559 = CARTESIAN_POINT('',(2.488646148221,-1.208340300844));+#560 = VECTOR('',#561,1.);+#561 = DIRECTION('',(-0.944940257227,-0.327242891857));+#562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#563 = ORIENTED_EDGE('',*,*,#514,.T.);+#564 = ORIENTED_EDGE('',*,*,#565,.F.);+#565 = EDGE_CURVE('',#566,#487,#568,.T.);+#566 = VERTEX_POINT('',#567);+#567 = CARTESIAN_POINT('',(-0.705,-1.45,0.575));+#568 = SURFACE_CURVE('',#569,(#573,#580),.PCURVE_S1.);+#569 = LINE('',#570,#571);+#570 = CARTESIAN_POINT('',(-0.705,-1.45,0.575));+#571 = VECTOR('',#572,1.);+#572 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#573 = PCURVE('',#527,#574);+#574 = DEFINITIONAL_REPRESENTATION('',(#575),#579);+#575 = LINE('',#576,#577);+#576 = CARTESIAN_POINT('',(-1.319141413911E-16,1.));+#577 = VECTOR('',#578,1.);+#578 = DIRECTION('',(1.,0.));+#579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#580 = PCURVE('',#581,#586);+#581 = PLANE('',#582);+#582 = AXIS2_PLACEMENT_3D('',#583,#584,#585);+#583 = CARTESIAN_POINT('',(-0.705,-1.45,0.725));+#584 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#585 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#586 = DEFINITIONAL_REPRESENTATION('',(#587),#591);+#587 = LINE('',#588,#589);+#588 = CARTESIAN_POINT('',(0.,-0.15));+#589 = VECTOR('',#590,1.);+#590 = DIRECTION('',(1.,0.));+#591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#592 = ORIENTED_EDGE('',*,*,#593,.F.);+#593 = EDGE_CURVE('',#543,#566,#594,.T.);+#594 = SURFACE_CURVE('',#595,(#598,#605),.PCURVE_S1.);+#595 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#596,#597),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#596 = CARTESIAN_POINT('',(-0.671621551758,-1.383243103516,0.1));+#597 = CARTESIAN_POINT('',(-0.705,-1.45,0.575));+#598 = PCURVE('',#527,#599);+#599 = DEFINITIONAL_REPRESENTATION('',(#600),#604);+#600 = LINE('',#601,#602);+#601 = CARTESIAN_POINT('',(1.694091357196E-16,-4.078708212487E-17));+#602 = VECTOR('',#603,1.);+#603 = DIRECTION('',(-3.013232771107E-16,1.));+#604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#605 = PCURVE('',#606,#611);+#606 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#607,#608)+ ,(#609,#610+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#607 = CARTESIAN_POINT('',(0.671621551758,-1.383243103516,0.1));+#608 = CARTESIAN_POINT('',(0.705,-1.45,0.575));+#609 = CARTESIAN_POINT('',(-0.671621551758,-1.383243103516,0.1));+#610 = CARTESIAN_POINT('',(-0.705,-1.45,0.575));+#611 = DEFINITIONAL_REPRESENTATION('',(#612),#616);+#612 = LINE('',#613,#614);+#613 = CARTESIAN_POINT('',(1.41,-7.190094007973E-17));+#614 = VECTOR('',#615,1.);+#615 = DIRECTION('',(0.,1.));+#616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#617 = ADVANCED_FACE('',(#618),#606,.F.);+#618 = FACE_BOUND('',#619,.F.);+#619 = EDGE_LOOP('',(#620,#642,#643,#671));+#620 = ORIENTED_EDGE('',*,*,#621,.T.);+#621 = EDGE_CURVE('',#622,#543,#624,.T.);+#622 = VERTEX_POINT('',#623);+#623 = CARTESIAN_POINT('',(0.671621551758,-1.383243103516,0.1));+#624 = SURFACE_CURVE('',#625,(#629,#635),.PCURVE_S1.);+#625 = LINE('',#626,#627);+#626 = CARTESIAN_POINT('',(0.671621551758,-1.383243103516,0.1));+#627 = VECTOR('',#628,1.);+#628 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#629 = PCURVE('',#606,#630);+#630 = DEFINITIONAL_REPRESENTATION('',(#631),#634);+#631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#632,#633),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.343243103516),.PIECEWISE_BEZIER_KNOTS.);+#632 = CARTESIAN_POINT('',(-9.845391426741E-17,-2.881104484236E-17));+#633 = CARTESIAN_POINT('',(1.41,4.270105424372E-17));+#634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#635 = PCURVE('',#65,#636);+#636 = DEFINITIONAL_REPRESENTATION('',(#637),#641);+#637 = LINE('',#638,#639);+#638 = CARTESIAN_POINT('',(3.075345178812,1.299627072626E-12));+#639 = VECTOR('',#640,1.);+#640 = DIRECTION('',(-0.436777995774,-0.899569331629));+#641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#642 = ORIENTED_EDGE('',*,*,#593,.T.);+#643 = ORIENTED_EDGE('',*,*,#644,.F.);+#644 = EDGE_CURVE('',#645,#566,#647,.T.);+#645 = VERTEX_POINT('',#646);+#646 = CARTESIAN_POINT('',(0.705,-1.45,0.575));+#647 = SURFACE_CURVE('',#648,(#652,#659),.PCURVE_S1.);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(0.705,-1.45,0.575));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#652 = PCURVE('',#606,#653);+#653 = DEFINITIONAL_REPRESENTATION('',(#654),#658);+#654 = LINE('',#655,#656);+#655 = CARTESIAN_POINT('',(-4.075942208407E-17,1.));+#656 = VECTOR('',#657,1.);+#657 = DIRECTION('',(1.,7.873922160462E-17));+#658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#659 = PCURVE('',#660,#665);+#660 = PLANE('',#661);+#661 = AXIS2_PLACEMENT_3D('',#662,#663,#664);+#662 = CARTESIAN_POINT('',(0.705,-1.45,0.725));+#663 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#664 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#665 = DEFINITIONAL_REPRESENTATION('',(#666),#670);+#666 = LINE('',#667,#668);+#667 = CARTESIAN_POINT('',(-0.,-0.15));+#668 = VECTOR('',#669,1.);+#669 = DIRECTION('',(1.,0.));+#670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#671 = ORIENTED_EDGE('',*,*,#672,.F.);+#672 = EDGE_CURVE('',#622,#645,#673,.T.);+#673 = SURFACE_CURVE('',#674,(#677,#684),.PCURVE_S1.);+#674 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#675,#676),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#675 = CARTESIAN_POINT('',(0.671621551758,-1.383243103516,0.1));+#676 = CARTESIAN_POINT('',(0.705,-1.45,0.575));+#677 = PCURVE('',#606,#678);+#678 = DEFINITIONAL_REPRESENTATION('',(#679),#683);+#679 = LINE('',#680,#681);+#680 = CARTESIAN_POINT('',(-9.845391426741E-17,-2.881104484236E-17));+#681 = VECTOR('',#682,1.);+#682 = DIRECTION('',(5.984490003858E-17,1.));+#683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#684 = PCURVE('',#685,#690);+#685 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#686,#687)+ ,(#688,#689+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#686 = CARTESIAN_POINT('',(0.733243103516,-1.321621551758,0.1));+#687 = CARTESIAN_POINT('',(0.8,-1.355,0.575));+#688 = CARTESIAN_POINT('',(0.671621551758,-1.383243103516,0.1));+#689 = CARTESIAN_POINT('',(0.705,-1.45,0.575));+#690 = DEFINITIONAL_REPRESENTATION('',(#691),#695);+#691 = LINE('',#692,#693);+#692 = CARTESIAN_POINT('',(0.134350288425,-7.739073835562E-18));+#693 = VECTOR('',#694,1.);+#694 = DIRECTION('',(2.498001805407E-16,1.));+#695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#696 = ADVANCED_FACE('',(#697),#685,.F.);+#697 = FACE_BOUND('',#698,.F.);+#698 = EDGE_LOOP('',(#699,#721,#722,#750));+#699 = ORIENTED_EDGE('',*,*,#700,.T.);+#700 = EDGE_CURVE('',#701,#622,#703,.T.);+#701 = VERTEX_POINT('',#702);+#702 = CARTESIAN_POINT('',(0.733243103516,-1.321621551758,0.1));+#703 = SURFACE_CURVE('',#704,(#708,#714),.PCURVE_S1.);+#704 = LINE('',#705,#706);+#705 = CARTESIAN_POINT('',(0.733243103516,-1.321621551758,0.1));+#706 = VECTOR('',#707,1.);+#707 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#708 = PCURVE('',#685,#709);+#709 = DEFINITIONAL_REPRESENTATION('',(#710),#713);+#710 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#711,#712),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,8.714603423064E-02),.PIECEWISE_BEZIER_KNOTS.);+#711 = CARTESIAN_POINT('',(-3.147409345358E-16,-4.075997580394E-17));+#712 = CARTESIAN_POINT('',(0.134350288425,-6.490167211522E-17));+#713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#714 = PCURVE('',#65,#715);+#715 = DEFINITIONAL_REPRESENTATION('',(#716),#720);+#716 = LINE('',#717,#718);+#717 = CARTESIAN_POINT('',(3.046827258556,8.234779600354E-02));+#718 = VECTOR('',#719,1.);+#719 = DIRECTION('',(0.327242891857,-0.944940257227));+#720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#721 = ORIENTED_EDGE('',*,*,#672,.T.);+#722 = ORIENTED_EDGE('',*,*,#723,.F.);+#723 = EDGE_CURVE('',#724,#645,#726,.T.);+#724 = VERTEX_POINT('',#725);+#725 = CARTESIAN_POINT('',(0.8,-1.355,0.575));+#726 = SURFACE_CURVE('',#727,(#731,#738),.PCURVE_S1.);+#727 = LINE('',#728,#729);+#728 = CARTESIAN_POINT('',(0.8,-1.355,0.575));+#729 = VECTOR('',#730,1.);+#730 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#731 = PCURVE('',#685,#732);+#732 = DEFINITIONAL_REPRESENTATION('',(#733),#737);+#733 = LINE('',#734,#735);+#734 = CARTESIAN_POINT('',(1.064990263496E-16,1.));+#735 = VECTOR('',#736,1.);+#736 = DIRECTION('',(1.,0.));+#737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#738 = PCURVE('',#739,#744);+#739 = PLANE('',#740);+#740 = AXIS2_PLACEMENT_3D('',#741,#742,#743);+#741 = CARTESIAN_POINT('',(0.8,-1.355,0.725));+#742 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#743 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#744 = DEFINITIONAL_REPRESENTATION('',(#745),#749);+#745 = LINE('',#746,#747);+#746 = CARTESIAN_POINT('',(-0.,-0.15));+#747 = VECTOR('',#748,1.);+#748 = DIRECTION('',(1.,0.));+#749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#750 = ORIENTED_EDGE('',*,*,#751,.F.);+#751 = EDGE_CURVE('',#701,#724,#752,.T.);+#752 = SURFACE_CURVE('',#753,(#756,#763),.PCURVE_S1.);+#753 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#754,#755),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#754 = CARTESIAN_POINT('',(0.733243103516,-1.321621551758,0.1));+#755 = CARTESIAN_POINT('',(0.8,-1.355,0.575));+#756 = PCURVE('',#685,#757);+#757 = DEFINITIONAL_REPRESENTATION('',(#758),#762);+#758 = LINE('',#759,#760);+#759 = CARTESIAN_POINT('',(-3.147409345358E-16,-4.075997580394E-17));+#760 = VECTOR('',#761,1.);+#761 = DIRECTION('',(3.433041737095E-16,1.));+#762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#763 = PCURVE('',#764,#769);+#764 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#765,#766)+ ,(#767,#768+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#765 = CARTESIAN_POINT('',(0.733243103516,1.321621551758,0.1));+#766 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#767 = CARTESIAN_POINT('',(0.733243103516,-1.321621551758,0.1));+#768 = CARTESIAN_POINT('',(0.8,-1.355,0.575));+#769 = DEFINITIONAL_REPRESENTATION('',(#770),#774);+#770 = LINE('',#771,#772);+#771 = CARTESIAN_POINT('',(2.71,-4.811329775014E-17));+#772 = VECTOR('',#773,1.);+#773 = DIRECTION('',(4.440892098501E-16,1.));+#774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#775 = ADVANCED_FACE('',(#776),#764,.F.);+#776 = FACE_BOUND('',#777,.F.);+#777 = EDGE_LOOP('',(#778,#800,#801,#829,#857,#885,#913,#941,#969,#997,+ #1025,#1053));+#778 = ORIENTED_EDGE('',*,*,#779,.T.);+#779 = EDGE_CURVE('',#780,#701,#782,.T.);+#780 = VERTEX_POINT('',#781);+#781 = CARTESIAN_POINT('',(0.733243103516,1.321621551758,0.1));+#782 = SURFACE_CURVE('',#783,(#787,#793),.PCURVE_S1.);+#783 = LINE('',#784,#785);+#784 = CARTESIAN_POINT('',(0.733243103516,1.321621551758,0.1));+#785 = VECTOR('',#786,1.);+#786 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#787 = PCURVE('',#764,#788);+#788 = DEFINITIONAL_REPRESENTATION('',(#789),#792);+#789 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#790,#791),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,2.643243103516),.PIECEWISE_BEZIER_KNOTS.);+#790 = CARTESIAN_POINT('',(3.109465121026E-16,-6.969422327902E-17));+#791 = CARTESIAN_POINT('',(2.71,6.648869657331E-17));+#792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#793 = PCURVE('',#65,#794);+#794 = DEFINITIONAL_REPRESENTATION('',(#795),#799);+#795 = LINE('',#796,#797);+#796 = CARTESIAN_POINT('',(0.669046826593,1.236858221101));+#797 = VECTOR('',#798,1.);+#798 = DIRECTION('',(0.899569331629,-0.436777995774));+#799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#800 = ORIENTED_EDGE('',*,*,#751,.T.);+#801 = ORIENTED_EDGE('',*,*,#802,.F.);+#802 = EDGE_CURVE('',#803,#724,#805,.T.);+#803 = VERTEX_POINT('',#804);+#804 = CARTESIAN_POINT('',(0.8,-1.165,0.575));+#805 = SURFACE_CURVE('',#806,(#810,#817),.PCURVE_S1.);+#806 = LINE('',#807,#808);+#807 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#808 = VECTOR('',#809,1.);+#809 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#810 = PCURVE('',#764,#811);+#811 = DEFINITIONAL_REPRESENTATION('',(#812),#816);+#812 = LINE('',#813,#814);+#813 = CARTESIAN_POINT('',(0.,1.));+#814 = VECTOR('',#815,1.);+#815 = DIRECTION('',(1.,0.));+#816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#817 = PCURVE('',#818,#823);+#818 = PLANE('',#819);+#819 = AXIS2_PLACEMENT_3D('',#820,#821,#822);+#820 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#821 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#822 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#823 = DEFINITIONAL_REPRESENTATION('',(#824),#828);+#824 = LINE('',#825,#826);+#825 = CARTESIAN_POINT('',(0.,-0.15));+#826 = VECTOR('',#827,1.);+#827 = DIRECTION('',(1.,0.));+#828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#829 = ORIENTED_EDGE('',*,*,#830,.F.);+#830 = EDGE_CURVE('',#831,#803,#833,.T.);+#831 = VERTEX_POINT('',#832);+#832 = CARTESIAN_POINT('',(0.8,-0.785,0.575));+#833 = SURFACE_CURVE('',#834,(#838,#845),.PCURVE_S1.);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#838 = PCURVE('',#764,#839);+#839 = DEFINITIONAL_REPRESENTATION('',(#840),#844);+#840 = LINE('',#841,#842);+#841 = CARTESIAN_POINT('',(0.,1.));+#842 = VECTOR('',#843,1.);+#843 = DIRECTION('',(1.,0.));+#844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#845 = PCURVE('',#846,#851);+#846 = PLANE('',#847);+#847 = AXIS2_PLACEMENT_3D('',#848,#849,#850);+#848 = CARTESIAN_POINT('',(0.75,-0.785,0.575));+#849 = DIRECTION('',(0.,0.,1.));+#850 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#851 = DEFINITIONAL_REPRESENTATION('',(#852),#856);+#852 = LINE('',#853,#854);+#853 = CARTESIAN_POINT('',(5.E-02,2.14));+#854 = VECTOR('',#855,1.);+#855 = DIRECTION('',(0.,-1.));+#856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#857 = ORIENTED_EDGE('',*,*,#858,.F.);+#858 = EDGE_CURVE('',#859,#831,#861,.T.);+#859 = VERTEX_POINT('',#860);+#860 = CARTESIAN_POINT('',(0.8,-0.515,0.575));+#861 = SURFACE_CURVE('',#862,(#866,#873),.PCURVE_S1.);+#862 = LINE('',#863,#864);+#863 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#864 = VECTOR('',#865,1.);+#865 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#866 = PCURVE('',#764,#867);+#867 = DEFINITIONAL_REPRESENTATION('',(#868),#872);+#868 = LINE('',#869,#870);+#869 = CARTESIAN_POINT('',(0.,1.));+#870 = VECTOR('',#871,1.);+#871 = DIRECTION('',(1.,0.));+#872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#873 = PCURVE('',#874,#879);+#874 = PLANE('',#875);+#875 = AXIS2_PLACEMENT_3D('',#876,#877,#878);+#876 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#877 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#878 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#879 = DEFINITIONAL_REPRESENTATION('',(#880),#884);+#880 = LINE('',#881,#882);+#881 = CARTESIAN_POINT('',(0.,-0.15));+#882 = VECTOR('',#883,1.);+#883 = DIRECTION('',(1.,0.));+#884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#885 = ORIENTED_EDGE('',*,*,#886,.F.);+#886 = EDGE_CURVE('',#887,#859,#889,.T.);+#887 = VERTEX_POINT('',#888);+#888 = CARTESIAN_POINT('',(0.8,-0.135,0.575));+#889 = SURFACE_CURVE('',#890,(#894,#901),.PCURVE_S1.);+#890 = LINE('',#891,#892);+#891 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#892 = VECTOR('',#893,1.);+#893 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#894 = PCURVE('',#764,#895);+#895 = DEFINITIONAL_REPRESENTATION('',(#896),#900);+#896 = LINE('',#897,#898);+#897 = CARTESIAN_POINT('',(0.,1.));+#898 = VECTOR('',#899,1.);+#899 = DIRECTION('',(1.,0.));+#900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#901 = PCURVE('',#902,#907);+#902 = PLANE('',#903);+#903 = AXIS2_PLACEMENT_3D('',#904,#905,#906);+#904 = CARTESIAN_POINT('',(0.75,-0.135,0.575));+#905 = DIRECTION('',(0.,0.,1.));+#906 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#907 = DEFINITIONAL_REPRESENTATION('',(#908),#912);+#908 = LINE('',#909,#910);+#909 = CARTESIAN_POINT('',(5.E-02,1.49));+#910 = VECTOR('',#911,1.);+#911 = DIRECTION('',(0.,-1.));+#912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#913 = ORIENTED_EDGE('',*,*,#914,.F.);+#914 = EDGE_CURVE('',#915,#887,#917,.T.);+#915 = VERTEX_POINT('',#916);+#916 = CARTESIAN_POINT('',(0.8,0.135,0.575));+#917 = SURFACE_CURVE('',#918,(#922,#929),.PCURVE_S1.);+#918 = LINE('',#919,#920);+#919 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#920 = VECTOR('',#921,1.);+#921 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#922 = PCURVE('',#764,#923);+#923 = DEFINITIONAL_REPRESENTATION('',(#924),#928);+#924 = LINE('',#925,#926);+#925 = CARTESIAN_POINT('',(0.,1.));+#926 = VECTOR('',#927,1.);+#927 = DIRECTION('',(1.,0.));+#928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#929 = PCURVE('',#930,#935);+#930 = PLANE('',#931);+#931 = AXIS2_PLACEMENT_3D('',#932,#933,#934);+#932 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#933 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#934 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#935 = DEFINITIONAL_REPRESENTATION('',(#936),#940);+#936 = LINE('',#937,#938);+#937 = CARTESIAN_POINT('',(0.,-0.15));+#938 = VECTOR('',#939,1.);+#939 = DIRECTION('',(1.,0.));+#940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#941 = ORIENTED_EDGE('',*,*,#942,.F.);+#942 = EDGE_CURVE('',#943,#915,#945,.T.);+#943 = VERTEX_POINT('',#944);+#944 = CARTESIAN_POINT('',(0.8,0.515,0.575));+#945 = SURFACE_CURVE('',#946,(#950,#957),.PCURVE_S1.);+#946 = LINE('',#947,#948);+#947 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#948 = VECTOR('',#949,1.);+#949 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#950 = PCURVE('',#764,#951);+#951 = DEFINITIONAL_REPRESENTATION('',(#952),#956);+#952 = LINE('',#953,#954);+#953 = CARTESIAN_POINT('',(0.,1.));+#954 = VECTOR('',#955,1.);+#955 = DIRECTION('',(1.,0.));+#956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#957 = PCURVE('',#958,#963);+#958 = PLANE('',#959);+#959 = AXIS2_PLACEMENT_3D('',#960,#961,#962);+#960 = CARTESIAN_POINT('',(0.75,0.515,0.575));+#961 = DIRECTION('',(0.,0.,1.));+#962 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#963 = DEFINITIONAL_REPRESENTATION('',(#964),#968);+#964 = LINE('',#965,#966);+#965 = CARTESIAN_POINT('',(5.E-02,0.84));+#966 = VECTOR('',#967,1.);+#967 = DIRECTION('',(0.,-1.));+#968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#969 = ORIENTED_EDGE('',*,*,#970,.F.);+#970 = EDGE_CURVE('',#971,#943,#973,.T.);+#971 = VERTEX_POINT('',#972);+#972 = CARTESIAN_POINT('',(0.8,0.785,0.575));+#973 = SURFACE_CURVE('',#974,(#978,#985),.PCURVE_S1.);+#974 = LINE('',#975,#976);+#975 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#976 = VECTOR('',#977,1.);+#977 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#978 = PCURVE('',#764,#979);+#979 = DEFINITIONAL_REPRESENTATION('',(#980),#984);+#980 = LINE('',#981,#982);+#981 = CARTESIAN_POINT('',(-1.110223024625E-16,1.));+#982 = VECTOR('',#983,1.);+#983 = DIRECTION('',(1.,0.));+#984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#985 = PCURVE('',#986,#991);+#986 = PLANE('',#987);+#987 = AXIS2_PLACEMENT_3D('',#988,#989,#990);+#988 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#989 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#990 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#991 = DEFINITIONAL_REPRESENTATION('',(#992),#996);+#992 = LINE('',#993,#994);+#993 = CARTESIAN_POINT('',(0.,-0.15));+#994 = VECTOR('',#995,1.);+#995 = DIRECTION('',(1.,0.));+#996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#997 = ORIENTED_EDGE('',*,*,#998,.F.);+#998 = EDGE_CURVE('',#999,#971,#1001,.T.);+#999 = VERTEX_POINT('',#1000);+#1000 = CARTESIAN_POINT('',(0.8,1.165,0.575));+#1001 = SURFACE_CURVE('',#1002,(#1006,#1013),.PCURVE_S1.);+#1002 = LINE('',#1003,#1004);+#1003 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#1004 = VECTOR('',#1005,1.);+#1005 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1006 = PCURVE('',#764,#1007);+#1007 = DEFINITIONAL_REPRESENTATION('',(#1008),#1012);+#1008 = LINE('',#1009,#1010);+#1009 = CARTESIAN_POINT('',(-8.326672684689E-17,1.));+#1010 = VECTOR('',#1011,1.);+#1011 = DIRECTION('',(1.,2.921639538487E-16));+#1012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1013 = PCURVE('',#1014,#1019);+#1014 = PLANE('',#1015);+#1015 = AXIS2_PLACEMENT_3D('',#1016,#1017,#1018);+#1016 = CARTESIAN_POINT('',(0.75,1.165,0.575));+#1017 = DIRECTION('',(0.,0.,1.));+#1018 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1019 = DEFINITIONAL_REPRESENTATION('',(#1020),#1024);+#1020 = LINE('',#1021,#1022);+#1021 = CARTESIAN_POINT('',(5.E-02,0.19));+#1022 = VECTOR('',#1023,1.);+#1023 = DIRECTION('',(0.,-1.));+#1024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1025 = ORIENTED_EDGE('',*,*,#1026,.F.);+#1026 = EDGE_CURVE('',#1027,#999,#1029,.T.);+#1027 = VERTEX_POINT('',#1028);+#1028 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#1029 = SURFACE_CURVE('',#1030,(#1034,#1041),.PCURVE_S1.);+#1030 = LINE('',#1031,#1032);+#1031 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#1032 = VECTOR('',#1033,1.);+#1033 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1034 = PCURVE('',#764,#1035);+#1035 = DEFINITIONAL_REPRESENTATION('',(#1036),#1040);+#1036 = LINE('',#1037,#1038);+#1037 = CARTESIAN_POINT('',(-1.817795570534E-18,1.));+#1038 = VECTOR('',#1039,1.);+#1039 = DIRECTION('',(1.,-5.843279076975E-16));+#1040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1041 = PCURVE('',#1042,#1047);+#1042 = PLANE('',#1043);+#1043 = AXIS2_PLACEMENT_3D('',#1044,#1045,#1046);+#1044 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#1045 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1046 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1047 = DEFINITIONAL_REPRESENTATION('',(#1048),#1052);+#1048 = LINE('',#1049,#1050);+#1049 = CARTESIAN_POINT('',(0.,-0.15));+#1050 = VECTOR('',#1051,1.);+#1051 = DIRECTION('',(1.,0.));+#1052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1053 = ORIENTED_EDGE('',*,*,#1054,.F.);+#1054 = EDGE_CURVE('',#780,#1027,#1055,.T.);+#1055 = SURFACE_CURVE('',#1056,(#1059,#1066),.PCURVE_S1.);+#1056 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1057,#1058),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1057 = CARTESIAN_POINT('',(0.733243103516,1.321621551758,0.1));+#1058 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#1059 = PCURVE('',#764,#1060);+#1060 = DEFINITIONAL_REPRESENTATION('',(#1061),#1065);+#1061 = LINE('',#1062,#1063);+#1062 = CARTESIAN_POINT('',(3.109465121026E-16,-6.969422327902E-17));+#1063 = VECTOR('',#1064,1.);+#1064 = DIRECTION('',(-3.127643076732E-16,1.));+#1065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1066 = PCURVE('',#92,#1067);+#1067 = DEFINITIONAL_REPRESENTATION('',(#1068),#1072);+#1068 = LINE('',#1069,#1070);+#1069 = CARTESIAN_POINT('',(0.134350288425,-1.550898165166E-16));+#1070 = VECTOR('',#1071,1.);+#1071 = DIRECTION('',(-3.330669073875E-16,1.));+#1072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1073 = ADVANCED_FACE('',(#1074),#1042,.F.);+#1074 = FACE_BOUND('',#1075,.F.);+#1075 = EDGE_LOOP('',(#1076,#1101,#1102,#1130));+#1076 = ORIENTED_EDGE('',*,*,#1077,.F.);+#1077 = EDGE_CURVE('',#1027,#1078,#1080,.T.);+#1078 = VERTEX_POINT('',#1079);+#1079 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#1080 = SURFACE_CURVE('',#1081,(#1084,#1090),.PCURVE_S1.);+#1081 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1082,#1083),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1082 = CARTESIAN_POINT('',(0.8,1.355,0.575));+#1083 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#1084 = PCURVE('',#1042,#1085);+#1085 = DEFINITIONAL_REPRESENTATION('',(#1086),#1089);+#1086 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1087,#1088),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1087 = CARTESIAN_POINT('',(0.,-0.15));+#1088 = CARTESIAN_POINT('',(0.,0.));+#1089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1090 = PCURVE('',#1091,#1096);+#1091 = PLANE('',#1092);+#1092 = AXIS2_PLACEMENT_3D('',#1093,#1094,#1095);+#1093 = CARTESIAN_POINT('',(0.705,1.45,0.725));+#1094 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1095 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1096 = DEFINITIONAL_REPRESENTATION('',(#1097),#1100);+#1097 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1098,#1099),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1098 = CARTESIAN_POINT('',(0.134350288425,-0.15));+#1099 = CARTESIAN_POINT('',(0.134350288425,0.));+#1100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1101 = ORIENTED_EDGE('',*,*,#1026,.T.);+#1102 = ORIENTED_EDGE('',*,*,#1103,.T.);+#1103 = EDGE_CURVE('',#999,#1104,#1106,.T.);+#1104 = VERTEX_POINT('',#1105);+#1105 = CARTESIAN_POINT('',(0.8,1.165,0.725));+#1106 = SURFACE_CURVE('',#1107,(#1111,#1118),.PCURVE_S1.);+#1107 = LINE('',#1108,#1109);+#1108 = CARTESIAN_POINT('',(0.8,1.165,0.536425222974));+#1109 = VECTOR('',#1110,1.);+#1110 = DIRECTION('',(0.,0.,1.));+#1111 = PCURVE('',#1042,#1112);+#1112 = DEFINITIONAL_REPRESENTATION('',(#1113),#1117);+#1113 = LINE('',#1114,#1115);+#1114 = CARTESIAN_POINT('',(0.19,-0.188574777026));+#1115 = VECTOR('',#1116,1.);+#1116 = DIRECTION('',(0.,1.));+#1117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1118 = PCURVE('',#1119,#1124);+#1119 = PLANE('',#1120);+#1120 = AXIS2_PLACEMENT_3D('',#1121,#1122,#1123);+#1121 = CARTESIAN_POINT('',(1.065218773576,1.165,0.347850445948));+#1122 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1123 = DIRECTION('',(0.,0.,1.));+#1124 = DEFINITIONAL_REPRESENTATION('',(#1125),#1129);+#1125 = LINE('',#1126,#1127);+#1126 = CARTESIAN_POINT('',(0.188574777026,0.265218773576));+#1127 = VECTOR('',#1128,1.);+#1128 = DIRECTION('',(1.,0.));+#1129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1130 = ORIENTED_EDGE('',*,*,#1131,.F.);+#1131 = EDGE_CURVE('',#1078,#1104,#1132,.T.);+#1132 = SURFACE_CURVE('',#1133,(#1137,#1144),.PCURVE_S1.);+#1133 = LINE('',#1134,#1135);+#1134 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#1135 = VECTOR('',#1136,1.);+#1136 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1137 = PCURVE('',#1042,#1138);+#1138 = DEFINITIONAL_REPRESENTATION('',(#1139),#1143);+#1139 = LINE('',#1140,#1141);+#1140 = CARTESIAN_POINT('',(0.,0.));+#1141 = VECTOR('',#1142,1.);+#1142 = DIRECTION('',(1.,0.));+#1143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1144 = PCURVE('',#1145,#1150);+#1145 = PLANE('',#1146);+#1146 = AXIS2_PLACEMENT_3D('',#1147,#1148,#1149);+#1147 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.725));+#1148 = DIRECTION('',(4.422964059899E-31,-3.624848457049E-27,-1.));+#1149 = DIRECTION('',(1.,1.51922136901E-16,4.422964059893E-31));+#1150 = DEFINITIONAL_REPRESENTATION('',(#1151),#1155);+#1151 = LINE('',#1152,#1153);+#1152 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1153 = VECTOR('',#1154,1.);+#1154 = DIRECTION('',(-4.08998344385E-17,1.));+#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1156 = ADVANCED_FACE('',(#1157,#2170),#1145,.F.);+#1157 = FACE_BOUND('',#1158,.F.);+#1158 = EDGE_LOOP('',(#1159,#1184,#1207,#1228,#1229,#1252,#1280,#1308,+ #1331,#1359,#1387,#1415,#1438,#1466,#1494,#1522,#1545,#1573,#1601,+ #1629,#1652,#1675,#1698,#1721,#1744,#1772,#1800,#1828,#1851,#1879,+ #1907,#1935,#1958,#1986,#2014,#2042,#2065,#2093,#2121,#2149));+#1159 = ORIENTED_EDGE('',*,*,#1160,.T.);+#1160 = EDGE_CURVE('',#1161,#1163,#1165,.T.);+#1161 = VERTEX_POINT('',#1162);+#1162 = CARTESIAN_POINT('',(-0.8,1.355,0.725));+#1163 = VERTEX_POINT('',#1164);+#1164 = CARTESIAN_POINT('',(-0.705,1.45,0.725));+#1165 = SURFACE_CURVE('',#1166,(#1170,#1177),.PCURVE_S1.);+#1166 = LINE('',#1167,#1168);+#1167 = CARTESIAN_POINT('',(-0.8,1.355,0.725));+#1168 = VECTOR('',#1169,1.);+#1169 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1170 = PCURVE('',#1145,#1171);+#1171 = DEFINITIONAL_REPRESENTATION('',(#1172),#1176);+#1172 = LINE('',#1173,#1174);+#1173 = CARTESIAN_POINT('',(-0.8,8.25E-02));+#1174 = VECTOR('',#1175,1.);+#1175 = DIRECTION('',(0.707106781187,-0.707106781187));+#1176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1177 = PCURVE('',#199,#1178);+#1178 = DEFINITIONAL_REPRESENTATION('',(#1179),#1183);+#1179 = LINE('',#1180,#1181);+#1180 = CARTESIAN_POINT('',(0.,0.));+#1181 = VECTOR('',#1182,1.);+#1182 = DIRECTION('',(1.,0.));+#1183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1184 = ORIENTED_EDGE('',*,*,#1185,.T.);+#1185 = EDGE_CURVE('',#1163,#1186,#1188,.T.);+#1186 = VERTEX_POINT('',#1187);+#1187 = CARTESIAN_POINT('',(0.705,1.45,0.725));+#1188 = SURFACE_CURVE('',#1189,(#1193,#1200),.PCURVE_S1.);+#1189 = LINE('',#1190,#1191);+#1190 = CARTESIAN_POINT('',(-0.705,1.45,0.725));+#1191 = VECTOR('',#1192,1.);+#1192 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1193 = PCURVE('',#1145,#1194);+#1194 = DEFINITIONAL_REPRESENTATION('',(#1195),#1199);+#1195 = LINE('',#1196,#1197);+#1196 = CARTESIAN_POINT('',(-0.705,-1.25E-02));+#1197 = VECTOR('',#1198,1.);+#1198 = DIRECTION('',(1.,4.08998344385E-17));+#1199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1200 = PCURVE('',#120,#1201);+#1201 = DEFINITIONAL_REPRESENTATION('',(#1202),#1206);+#1202 = LINE('',#1203,#1204);+#1203 = CARTESIAN_POINT('',(0.,0.));+#1204 = VECTOR('',#1205,1.);+#1205 = DIRECTION('',(1.,0.));+#1206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1207 = ORIENTED_EDGE('',*,*,#1208,.T.);+#1208 = EDGE_CURVE('',#1186,#1078,#1209,.T.);+#1209 = SURFACE_CURVE('',#1210,(#1214,#1221),.PCURVE_S1.);+#1210 = LINE('',#1211,#1212);+#1211 = CARTESIAN_POINT('',(0.705,1.45,0.725));+#1212 = VECTOR('',#1213,1.);+#1213 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1214 = PCURVE('',#1145,#1215);+#1215 = DEFINITIONAL_REPRESENTATION('',(#1216),#1220);+#1216 = LINE('',#1217,#1218);+#1217 = CARTESIAN_POINT('',(0.705,-1.25E-02));+#1218 = VECTOR('',#1219,1.);+#1219 = DIRECTION('',(0.707106781187,0.707106781187));+#1220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1221 = PCURVE('',#1091,#1222);+#1222 = DEFINITIONAL_REPRESENTATION('',(#1223),#1227);+#1223 = LINE('',#1224,#1225);+#1224 = CARTESIAN_POINT('',(0.,0.));+#1225 = VECTOR('',#1226,1.);+#1226 = DIRECTION('',(1.,0.));+#1227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1228 = ORIENTED_EDGE('',*,*,#1131,.T.);+#1229 = ORIENTED_EDGE('',*,*,#1230,.F.);+#1230 = EDGE_CURVE('',#1231,#1104,#1233,.T.);+#1231 = VERTEX_POINT('',#1232);+#1232 = CARTESIAN_POINT('',(0.85,1.165,0.725));+#1233 = SURFACE_CURVE('',#1234,(#1238,#1245),.PCURVE_S1.);+#1234 = LINE('',#1235,#1236);+#1235 = CARTESIAN_POINT('',(0.85,1.165,0.725));+#1236 = VECTOR('',#1237,1.);+#1237 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1238 = PCURVE('',#1145,#1239);+#1239 = DEFINITIONAL_REPRESENTATION('',(#1240),#1244);+#1240 = LINE('',#1241,#1242);+#1241 = CARTESIAN_POINT('',(0.85,0.2725));+#1242 = VECTOR('',#1243,1.);+#1243 = DIRECTION('',(-1.,-4.08998344385E-17));+#1244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1245 = PCURVE('',#1119,#1246);+#1246 = DEFINITIONAL_REPRESENTATION('',(#1247),#1251);+#1247 = LINE('',#1248,#1249);+#1248 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1249 = VECTOR('',#1250,1.);+#1250 = DIRECTION('',(0.,1.));+#1251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1252 = ORIENTED_EDGE('',*,*,#1253,.T.);+#1253 = EDGE_CURVE('',#1231,#1254,#1256,.T.);+#1254 = VERTEX_POINT('',#1255);+#1255 = CARTESIAN_POINT('',(0.85,0.785,0.725));+#1256 = SURFACE_CURVE('',#1257,(#1261,#1268),.PCURVE_S1.);+#1257 = LINE('',#1258,#1259);+#1258 = CARTESIAN_POINT('',(0.85,1.165,0.725));+#1259 = VECTOR('',#1260,1.);+#1260 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1261 = PCURVE('',#1145,#1262);+#1262 = DEFINITIONAL_REPRESENTATION('',(#1263),#1267);+#1263 = LINE('',#1264,#1265);+#1264 = CARTESIAN_POINT('',(0.85,0.2725));+#1265 = VECTOR('',#1266,1.);+#1266 = DIRECTION('',(-4.08998344385E-17,1.));+#1267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1268 = PCURVE('',#1269,#1274);+#1269 = CYLINDRICAL_SURFACE('',#1270,0.25);+#1270 = AXIS2_PLACEMENT_3D('',#1271,#1272,#1273);+#1271 = CARTESIAN_POINT('',(0.85,1.165,0.475));+#1272 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1273 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1274 = DEFINITIONAL_REPRESENTATION('',(#1275),#1279);+#1275 = LINE('',#1276,#1277);+#1276 = CARTESIAN_POINT('',(4.886921905584,0.));+#1277 = VECTOR('',#1278,1.);+#1278 = DIRECTION('',(0.,-1.));+#1279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1280 = ORIENTED_EDGE('',*,*,#1281,.T.);+#1281 = EDGE_CURVE('',#1254,#1282,#1284,.T.);+#1282 = VERTEX_POINT('',#1283);+#1283 = CARTESIAN_POINT('',(0.8,0.785,0.725));+#1284 = SURFACE_CURVE('',#1285,(#1289,#1296),.PCURVE_S1.);+#1285 = LINE('',#1286,#1287);+#1286 = CARTESIAN_POINT('',(0.85,0.785,0.725));+#1287 = VECTOR('',#1288,1.);+#1288 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1289 = PCURVE('',#1145,#1290);+#1290 = DEFINITIONAL_REPRESENTATION('',(#1291),#1295);+#1291 = LINE('',#1292,#1293);+#1292 = CARTESIAN_POINT('',(0.85,0.6525));+#1293 = VECTOR('',#1294,1.);+#1294 = DIRECTION('',(-1.,-4.08998344385E-17));+#1295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1296 = PCURVE('',#1297,#1302);+#1297 = PLANE('',#1298);+#1298 = AXIS2_PLACEMENT_3D('',#1299,#1300,#1301);+#1299 = CARTESIAN_POINT('',(1.065218773576,0.785,0.347850445948));+#1300 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1301 = DIRECTION('',(0.,0.,1.));+#1302 = DEFINITIONAL_REPRESENTATION('',(#1303),#1307);+#1303 = LINE('',#1304,#1305);+#1304 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1305 = VECTOR('',#1306,1.);+#1306 = DIRECTION('',(0.,1.));+#1307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1308 = ORIENTED_EDGE('',*,*,#1309,.T.);+#1309 = EDGE_CURVE('',#1282,#1310,#1312,.T.);+#1310 = VERTEX_POINT('',#1311);+#1311 = CARTESIAN_POINT('',(0.8,0.515,0.725));+#1312 = SURFACE_CURVE('',#1313,(#1317,#1324),.PCURVE_S1.);+#1313 = LINE('',#1314,#1315);+#1314 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#1315 = VECTOR('',#1316,1.);+#1316 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1317 = PCURVE('',#1145,#1318);+#1318 = DEFINITIONAL_REPRESENTATION('',(#1319),#1323);+#1319 = LINE('',#1320,#1321);+#1320 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1321 = VECTOR('',#1322,1.);+#1322 = DIRECTION('',(-4.08998344385E-17,1.));+#1323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1324 = PCURVE('',#986,#1325);+#1325 = DEFINITIONAL_REPRESENTATION('',(#1326),#1330);+#1326 = LINE('',#1327,#1328);+#1327 = CARTESIAN_POINT('',(0.,0.));+#1328 = VECTOR('',#1329,1.);+#1329 = DIRECTION('',(1.,0.));+#1330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1331 = ORIENTED_EDGE('',*,*,#1332,.F.);+#1332 = EDGE_CURVE('',#1333,#1310,#1335,.T.);+#1333 = VERTEX_POINT('',#1334);+#1334 = CARTESIAN_POINT('',(0.85,0.515,0.725));+#1335 = SURFACE_CURVE('',#1336,(#1340,#1347),.PCURVE_S1.);+#1336 = LINE('',#1337,#1338);+#1337 = CARTESIAN_POINT('',(0.85,0.515,0.725));+#1338 = VECTOR('',#1339,1.);+#1339 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1340 = PCURVE('',#1145,#1341);+#1341 = DEFINITIONAL_REPRESENTATION('',(#1342),#1346);+#1342 = LINE('',#1343,#1344);+#1343 = CARTESIAN_POINT('',(0.85,0.9225));+#1344 = VECTOR('',#1345,1.);+#1345 = DIRECTION('',(-1.,-4.08998344385E-17));+#1346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1347 = PCURVE('',#1348,#1353);+#1348 = PLANE('',#1349);+#1349 = AXIS2_PLACEMENT_3D('',#1350,#1351,#1352);+#1350 = CARTESIAN_POINT('',(1.065218773576,0.515,0.347850445948));+#1351 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1352 = DIRECTION('',(0.,0.,1.));+#1353 = DEFINITIONAL_REPRESENTATION('',(#1354),#1358);+#1354 = LINE('',#1355,#1356);+#1355 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1356 = VECTOR('',#1357,1.);+#1357 = DIRECTION('',(0.,1.));+#1358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1359 = ORIENTED_EDGE('',*,*,#1360,.T.);+#1360 = EDGE_CURVE('',#1333,#1361,#1363,.T.);+#1361 = VERTEX_POINT('',#1362);+#1362 = CARTESIAN_POINT('',(0.85,0.135,0.725));+#1363 = SURFACE_CURVE('',#1364,(#1368,#1375),.PCURVE_S1.);+#1364 = LINE('',#1365,#1366);+#1365 = CARTESIAN_POINT('',(0.85,0.515,0.725));+#1366 = VECTOR('',#1367,1.);+#1367 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1368 = PCURVE('',#1145,#1369);+#1369 = DEFINITIONAL_REPRESENTATION('',(#1370),#1374);+#1370 = LINE('',#1371,#1372);+#1371 = CARTESIAN_POINT('',(0.85,0.9225));+#1372 = VECTOR('',#1373,1.);+#1373 = DIRECTION('',(-4.08998344385E-17,1.));+#1374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1375 = PCURVE('',#1376,#1381);+#1376 = CYLINDRICAL_SURFACE('',#1377,0.25);+#1377 = AXIS2_PLACEMENT_3D('',#1378,#1379,#1380);+#1378 = CARTESIAN_POINT('',(0.85,0.515,0.475));+#1379 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1380 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1381 = DEFINITIONAL_REPRESENTATION('',(#1382),#1386);+#1382 = LINE('',#1383,#1384);+#1383 = CARTESIAN_POINT('',(4.886921905584,0.));+#1384 = VECTOR('',#1385,1.);+#1385 = DIRECTION('',(0.,-1.));+#1386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1387 = ORIENTED_EDGE('',*,*,#1388,.T.);+#1388 = EDGE_CURVE('',#1361,#1389,#1391,.T.);+#1389 = VERTEX_POINT('',#1390);+#1390 = CARTESIAN_POINT('',(0.8,0.135,0.725));+#1391 = SURFACE_CURVE('',#1392,(#1396,#1403),.PCURVE_S1.);+#1392 = LINE('',#1393,#1394);+#1393 = CARTESIAN_POINT('',(0.85,0.135,0.725));+#1394 = VECTOR('',#1395,1.);+#1395 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1396 = PCURVE('',#1145,#1397);+#1397 = DEFINITIONAL_REPRESENTATION('',(#1398),#1402);+#1398 = LINE('',#1399,#1400);+#1399 = CARTESIAN_POINT('',(0.85,1.3025));+#1400 = VECTOR('',#1401,1.);+#1401 = DIRECTION('',(-1.,-4.08998344385E-17));+#1402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1403 = PCURVE('',#1404,#1409);+#1404 = PLANE('',#1405);+#1405 = AXIS2_PLACEMENT_3D('',#1406,#1407,#1408);+#1406 = CARTESIAN_POINT('',(1.065218773576,0.135,0.347850445948));+#1407 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1408 = DIRECTION('',(0.,0.,1.));+#1409 = DEFINITIONAL_REPRESENTATION('',(#1410),#1414);+#1410 = LINE('',#1411,#1412);+#1411 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1412 = VECTOR('',#1413,1.);+#1413 = DIRECTION('',(0.,1.));+#1414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1415 = ORIENTED_EDGE('',*,*,#1416,.T.);+#1416 = EDGE_CURVE('',#1389,#1417,#1419,.T.);+#1417 = VERTEX_POINT('',#1418);+#1418 = CARTESIAN_POINT('',(0.8,-0.135,0.725));+#1419 = SURFACE_CURVE('',#1420,(#1424,#1431),.PCURVE_S1.);+#1420 = LINE('',#1421,#1422);+#1421 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#1422 = VECTOR('',#1423,1.);+#1423 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1424 = PCURVE('',#1145,#1425);+#1425 = DEFINITIONAL_REPRESENTATION('',(#1426),#1430);+#1426 = LINE('',#1427,#1428);+#1427 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1428 = VECTOR('',#1429,1.);+#1429 = DIRECTION('',(-4.08998344385E-17,1.));+#1430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1431 = PCURVE('',#930,#1432);+#1432 = DEFINITIONAL_REPRESENTATION('',(#1433),#1437);+#1433 = LINE('',#1434,#1435);+#1434 = CARTESIAN_POINT('',(0.,0.));+#1435 = VECTOR('',#1436,1.);+#1436 = DIRECTION('',(1.,0.));+#1437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1438 = ORIENTED_EDGE('',*,*,#1439,.F.);+#1439 = EDGE_CURVE('',#1440,#1417,#1442,.T.);+#1440 = VERTEX_POINT('',#1441);+#1441 = CARTESIAN_POINT('',(0.85,-0.135,0.725));+#1442 = SURFACE_CURVE('',#1443,(#1447,#1454),.PCURVE_S1.);+#1443 = LINE('',#1444,#1445);+#1444 = CARTESIAN_POINT('',(0.85,-0.135,0.725));+#1445 = VECTOR('',#1446,1.);+#1446 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1447 = PCURVE('',#1145,#1448);+#1448 = DEFINITIONAL_REPRESENTATION('',(#1449),#1453);+#1449 = LINE('',#1450,#1451);+#1450 = CARTESIAN_POINT('',(0.85,1.5725));+#1451 = VECTOR('',#1452,1.);+#1452 = DIRECTION('',(-1.,-4.08998344385E-17));+#1453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1454 = PCURVE('',#1455,#1460);+#1455 = PLANE('',#1456);+#1456 = AXIS2_PLACEMENT_3D('',#1457,#1458,#1459);+#1457 = CARTESIAN_POINT('',(1.065218773576,-0.135,0.347850445948));+#1458 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1459 = DIRECTION('',(0.,0.,1.));+#1460 = DEFINITIONAL_REPRESENTATION('',(#1461),#1465);+#1461 = LINE('',#1462,#1463);+#1462 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1463 = VECTOR('',#1464,1.);+#1464 = DIRECTION('',(0.,1.));+#1465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1466 = ORIENTED_EDGE('',*,*,#1467,.T.);+#1467 = EDGE_CURVE('',#1440,#1468,#1470,.T.);+#1468 = VERTEX_POINT('',#1469);+#1469 = CARTESIAN_POINT('',(0.85,-0.515,0.725));+#1470 = SURFACE_CURVE('',#1471,(#1475,#1482),.PCURVE_S1.);+#1471 = LINE('',#1472,#1473);+#1472 = CARTESIAN_POINT('',(0.85,-0.135,0.725));+#1473 = VECTOR('',#1474,1.);+#1474 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1475 = PCURVE('',#1145,#1476);+#1476 = DEFINITIONAL_REPRESENTATION('',(#1477),#1481);+#1477 = LINE('',#1478,#1479);+#1478 = CARTESIAN_POINT('',(0.85,1.5725));+#1479 = VECTOR('',#1480,1.);+#1480 = DIRECTION('',(-4.08998344385E-17,1.));+#1481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1482 = PCURVE('',#1483,#1488);+#1483 = CYLINDRICAL_SURFACE('',#1484,0.25);+#1484 = AXIS2_PLACEMENT_3D('',#1485,#1486,#1487);+#1485 = CARTESIAN_POINT('',(0.85,-0.135,0.475));+#1486 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1487 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1488 = DEFINITIONAL_REPRESENTATION('',(#1489),#1493);+#1489 = LINE('',#1490,#1491);+#1490 = CARTESIAN_POINT('',(4.886921905584,0.));+#1491 = VECTOR('',#1492,1.);+#1492 = DIRECTION('',(0.,-1.));+#1493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1494 = ORIENTED_EDGE('',*,*,#1495,.T.);+#1495 = EDGE_CURVE('',#1468,#1496,#1498,.T.);+#1496 = VERTEX_POINT('',#1497);+#1497 = CARTESIAN_POINT('',(0.8,-0.515,0.725));+#1498 = SURFACE_CURVE('',#1499,(#1503,#1510),.PCURVE_S1.);+#1499 = LINE('',#1500,#1501);+#1500 = CARTESIAN_POINT('',(0.85,-0.515,0.725));+#1501 = VECTOR('',#1502,1.);+#1502 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1503 = PCURVE('',#1145,#1504);+#1504 = DEFINITIONAL_REPRESENTATION('',(#1505),#1509);+#1505 = LINE('',#1506,#1507);+#1506 = CARTESIAN_POINT('',(0.85,1.9525));+#1507 = VECTOR('',#1508,1.);+#1508 = DIRECTION('',(-1.,-4.08998344385E-17));+#1509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1510 = PCURVE('',#1511,#1516);+#1511 = PLANE('',#1512);+#1512 = AXIS2_PLACEMENT_3D('',#1513,#1514,#1515);+#1513 = CARTESIAN_POINT('',(1.065218773576,-0.515,0.347850445948));+#1514 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1515 = DIRECTION('',(0.,0.,1.));+#1516 = DEFINITIONAL_REPRESENTATION('',(#1517),#1521);+#1517 = LINE('',#1518,#1519);+#1518 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1519 = VECTOR('',#1520,1.);+#1520 = DIRECTION('',(0.,1.));+#1521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1522 = ORIENTED_EDGE('',*,*,#1523,.T.);+#1523 = EDGE_CURVE('',#1496,#1524,#1526,.T.);+#1524 = VERTEX_POINT('',#1525);+#1525 = CARTESIAN_POINT('',(0.8,-0.785,0.725));+#1526 = SURFACE_CURVE('',#1527,(#1531,#1538),.PCURVE_S1.);+#1527 = LINE('',#1528,#1529);+#1528 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#1529 = VECTOR('',#1530,1.);+#1530 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1531 = PCURVE('',#1145,#1532);+#1532 = DEFINITIONAL_REPRESENTATION('',(#1533),#1537);+#1533 = LINE('',#1534,#1535);+#1534 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1535 = VECTOR('',#1536,1.);+#1536 = DIRECTION('',(-4.08998344385E-17,1.));+#1537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1538 = PCURVE('',#874,#1539);+#1539 = DEFINITIONAL_REPRESENTATION('',(#1540),#1544);+#1540 = LINE('',#1541,#1542);+#1541 = CARTESIAN_POINT('',(0.,0.));+#1542 = VECTOR('',#1543,1.);+#1543 = DIRECTION('',(1.,0.));+#1544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1545 = ORIENTED_EDGE('',*,*,#1546,.F.);+#1546 = EDGE_CURVE('',#1547,#1524,#1549,.T.);+#1547 = VERTEX_POINT('',#1548);+#1548 = CARTESIAN_POINT('',(0.85,-0.785,0.725));+#1549 = SURFACE_CURVE('',#1550,(#1554,#1561),.PCURVE_S1.);+#1550 = LINE('',#1551,#1552);+#1551 = CARTESIAN_POINT('',(0.85,-0.785,0.725));+#1552 = VECTOR('',#1553,1.);+#1553 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1554 = PCURVE('',#1145,#1555);+#1555 = DEFINITIONAL_REPRESENTATION('',(#1556),#1560);+#1556 = LINE('',#1557,#1558);+#1557 = CARTESIAN_POINT('',(0.85,2.2225));+#1558 = VECTOR('',#1559,1.);+#1559 = DIRECTION('',(-1.,-4.08998344385E-17));+#1560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1561 = PCURVE('',#1562,#1567);+#1562 = PLANE('',#1563);+#1563 = AXIS2_PLACEMENT_3D('',#1564,#1565,#1566);+#1564 = CARTESIAN_POINT('',(1.065218773576,-0.785,0.347850445948));+#1565 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1566 = DIRECTION('',(0.,0.,1.));+#1567 = DEFINITIONAL_REPRESENTATION('',(#1568),#1572);+#1568 = LINE('',#1569,#1570);+#1569 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1570 = VECTOR('',#1571,1.);+#1571 = DIRECTION('',(0.,1.));+#1572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1573 = ORIENTED_EDGE('',*,*,#1574,.T.);+#1574 = EDGE_CURVE('',#1547,#1575,#1577,.T.);+#1575 = VERTEX_POINT('',#1576);+#1576 = CARTESIAN_POINT('',(0.85,-1.165,0.725));+#1577 = SURFACE_CURVE('',#1578,(#1582,#1589),.PCURVE_S1.);+#1578 = LINE('',#1579,#1580);+#1579 = CARTESIAN_POINT('',(0.85,-0.785,0.725));+#1580 = VECTOR('',#1581,1.);+#1581 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1582 = PCURVE('',#1145,#1583);+#1583 = DEFINITIONAL_REPRESENTATION('',(#1584),#1588);+#1584 = LINE('',#1585,#1586);+#1585 = CARTESIAN_POINT('',(0.85,2.2225));+#1586 = VECTOR('',#1587,1.);+#1587 = DIRECTION('',(-4.08998344385E-17,1.));+#1588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1589 = PCURVE('',#1590,#1595);+#1590 = CYLINDRICAL_SURFACE('',#1591,0.25);+#1591 = AXIS2_PLACEMENT_3D('',#1592,#1593,#1594);+#1592 = CARTESIAN_POINT('',(0.85,-0.785,0.475));+#1593 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1594 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1595 = DEFINITIONAL_REPRESENTATION('',(#1596),#1600);+#1596 = LINE('',#1597,#1598);+#1597 = CARTESIAN_POINT('',(4.886921905584,0.));+#1598 = VECTOR('',#1599,1.);+#1599 = DIRECTION('',(0.,-1.));+#1600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1601 = ORIENTED_EDGE('',*,*,#1602,.T.);+#1602 = EDGE_CURVE('',#1575,#1603,#1605,.T.);+#1603 = VERTEX_POINT('',#1604);+#1604 = CARTESIAN_POINT('',(0.8,-1.165,0.725));+#1605 = SURFACE_CURVE('',#1606,(#1610,#1617),.PCURVE_S1.);+#1606 = LINE('',#1607,#1608);+#1607 = CARTESIAN_POINT('',(0.85,-1.165,0.725));+#1608 = VECTOR('',#1609,1.);+#1609 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1610 = PCURVE('',#1145,#1611);+#1611 = DEFINITIONAL_REPRESENTATION('',(#1612),#1616);+#1612 = LINE('',#1613,#1614);+#1613 = CARTESIAN_POINT('',(0.85,2.6025));+#1614 = VECTOR('',#1615,1.);+#1615 = DIRECTION('',(-1.,-4.08998344385E-17));+#1616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1617 = PCURVE('',#1618,#1623);+#1618 = PLANE('',#1619);+#1619 = AXIS2_PLACEMENT_3D('',#1620,#1621,#1622);+#1620 = CARTESIAN_POINT('',(1.065218773576,-1.165,0.347850445948));+#1621 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1622 = DIRECTION('',(0.,0.,1.));+#1623 = DEFINITIONAL_REPRESENTATION('',(#1624),#1628);+#1624 = LINE('',#1625,#1626);+#1625 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1626 = VECTOR('',#1627,1.);+#1627 = DIRECTION('',(0.,1.));+#1628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1629 = ORIENTED_EDGE('',*,*,#1630,.T.);+#1630 = EDGE_CURVE('',#1603,#1631,#1633,.T.);+#1631 = VERTEX_POINT('',#1632);+#1632 = CARTESIAN_POINT('',(0.8,-1.355,0.725));+#1633 = SURFACE_CURVE('',#1634,(#1638,#1645),.PCURVE_S1.);+#1634 = LINE('',#1635,#1636);+#1635 = CARTESIAN_POINT('',(0.8,1.355,0.725));+#1636 = VECTOR('',#1637,1.);+#1637 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1638 = PCURVE('',#1145,#1639);+#1639 = DEFINITIONAL_REPRESENTATION('',(#1640),#1644);+#1640 = LINE('',#1641,#1642);+#1641 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1642 = VECTOR('',#1643,1.);+#1643 = DIRECTION('',(-4.08998344385E-17,1.));+#1644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1645 = PCURVE('',#818,#1646);+#1646 = DEFINITIONAL_REPRESENTATION('',(#1647),#1651);+#1647 = LINE('',#1648,#1649);+#1648 = CARTESIAN_POINT('',(0.,0.));+#1649 = VECTOR('',#1650,1.);+#1650 = DIRECTION('',(1.,0.));+#1651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1652 = ORIENTED_EDGE('',*,*,#1653,.T.);+#1653 = EDGE_CURVE('',#1631,#1654,#1656,.T.);+#1654 = VERTEX_POINT('',#1655);+#1655 = CARTESIAN_POINT('',(0.705,-1.45,0.725));+#1656 = SURFACE_CURVE('',#1657,(#1661,#1668),.PCURVE_S1.);+#1657 = LINE('',#1658,#1659);+#1658 = CARTESIAN_POINT('',(0.8,-1.355,0.725));+#1659 = VECTOR('',#1660,1.);+#1660 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1661 = PCURVE('',#1145,#1662);+#1662 = DEFINITIONAL_REPRESENTATION('',(#1663),#1667);+#1663 = LINE('',#1664,#1665);+#1664 = CARTESIAN_POINT('',(0.8,2.7925));+#1665 = VECTOR('',#1666,1.);+#1666 = DIRECTION('',(-0.707106781187,0.707106781187));+#1667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1668 = PCURVE('',#739,#1669);+#1669 = DEFINITIONAL_REPRESENTATION('',(#1670),#1674);+#1670 = LINE('',#1671,#1672);+#1671 = CARTESIAN_POINT('',(0.,0.));+#1672 = VECTOR('',#1673,1.);+#1673 = DIRECTION('',(1.,0.));+#1674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1675 = ORIENTED_EDGE('',*,*,#1676,.T.);+#1676 = EDGE_CURVE('',#1654,#1677,#1679,.T.);+#1677 = VERTEX_POINT('',#1678);+#1678 = CARTESIAN_POINT('',(-0.705,-1.45,0.725));+#1679 = SURFACE_CURVE('',#1680,(#1684,#1691),.PCURVE_S1.);+#1680 = LINE('',#1681,#1682);+#1681 = CARTESIAN_POINT('',(0.705,-1.45,0.725));+#1682 = VECTOR('',#1683,1.);+#1683 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1684 = PCURVE('',#1145,#1685);+#1685 = DEFINITIONAL_REPRESENTATION('',(#1686),#1690);+#1686 = LINE('',#1687,#1688);+#1687 = CARTESIAN_POINT('',(0.705,2.8875));+#1688 = VECTOR('',#1689,1.);+#1689 = DIRECTION('',(-1.,-4.08998344385E-17));+#1690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1691 = PCURVE('',#660,#1692);+#1692 = DEFINITIONAL_REPRESENTATION('',(#1693),#1697);+#1693 = LINE('',#1694,#1695);+#1694 = CARTESIAN_POINT('',(0.,0.));+#1695 = VECTOR('',#1696,1.);+#1696 = DIRECTION('',(1.,0.));+#1697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1698 = ORIENTED_EDGE('',*,*,#1699,.T.);+#1699 = EDGE_CURVE('',#1677,#1700,#1702,.T.);+#1700 = VERTEX_POINT('',#1701);+#1701 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#1702 = SURFACE_CURVE('',#1703,(#1707,#1714),.PCURVE_S1.);+#1703 = LINE('',#1704,#1705);+#1704 = CARTESIAN_POINT('',(-0.705,-1.45,0.725));+#1705 = VECTOR('',#1706,1.);+#1706 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1707 = PCURVE('',#1145,#1708);+#1708 = DEFINITIONAL_REPRESENTATION('',(#1709),#1713);+#1709 = LINE('',#1710,#1711);+#1710 = CARTESIAN_POINT('',(-0.705,2.8875));+#1711 = VECTOR('',#1712,1.);+#1712 = DIRECTION('',(-0.707106781187,-0.707106781187));+#1713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1714 = PCURVE('',#581,#1715);+#1715 = DEFINITIONAL_REPRESENTATION('',(#1716),#1720);+#1716 = LINE('',#1717,#1718);+#1717 = CARTESIAN_POINT('',(0.,0.));+#1718 = VECTOR('',#1719,1.);+#1719 = DIRECTION('',(1.,0.));+#1720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1721 = ORIENTED_EDGE('',*,*,#1722,.T.);+#1722 = EDGE_CURVE('',#1700,#1723,#1725,.T.);+#1723 = VERTEX_POINT('',#1724);+#1724 = CARTESIAN_POINT('',(-0.8,-1.165,0.725));+#1725 = SURFACE_CURVE('',#1726,(#1730,#1737),.PCURVE_S1.);+#1726 = LINE('',#1727,#1728);+#1727 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#1728 = VECTOR('',#1729,1.);+#1729 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1730 = PCURVE('',#1145,#1731);+#1731 = DEFINITIONAL_REPRESENTATION('',(#1732),#1736);+#1732 = LINE('',#1733,#1734);+#1733 = CARTESIAN_POINT('',(-0.8,2.7925));+#1734 = VECTOR('',#1735,1.);+#1735 = DIRECTION('',(4.08998344385E-17,-1.));+#1736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1737 = PCURVE('',#502,#1738);+#1738 = DEFINITIONAL_REPRESENTATION('',(#1739),#1743);+#1739 = LINE('',#1740,#1741);+#1740 = CARTESIAN_POINT('',(0.,0.));+#1741 = VECTOR('',#1742,1.);+#1742 = DIRECTION('',(1.,0.));+#1743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1744 = ORIENTED_EDGE('',*,*,#1745,.F.);+#1745 = EDGE_CURVE('',#1746,#1723,#1748,.T.);+#1746 = VERTEX_POINT('',#1747);+#1747 = CARTESIAN_POINT('',(-0.85,-1.165,0.725));+#1748 = SURFACE_CURVE('',#1749,(#1753,#1760),.PCURVE_S1.);+#1749 = LINE('',#1750,#1751);+#1750 = CARTESIAN_POINT('',(-0.85,-1.165,0.725));+#1751 = VECTOR('',#1752,1.);+#1752 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1753 = PCURVE('',#1145,#1754);+#1754 = DEFINITIONAL_REPRESENTATION('',(#1755),#1759);+#1755 = LINE('',#1756,#1757);+#1756 = CARTESIAN_POINT('',(-0.85,2.6025));+#1757 = VECTOR('',#1758,1.);+#1758 = DIRECTION('',(1.,1.633645143532E-16));+#1759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1760 = PCURVE('',#1761,#1766);+#1761 = PLANE('',#1762);+#1762 = AXIS2_PLACEMENT_3D('',#1763,#1764,#1765);+#1763 = CARTESIAN_POINT('',(-1.065218773576,-1.165,0.347850445948));+#1764 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1765 = DIRECTION('',(0.,-0.,1.));+#1766 = DEFINITIONAL_REPRESENTATION('',(#1767),#1771);+#1767 = LINE('',#1768,#1769);+#1768 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1769 = VECTOR('',#1770,1.);+#1770 = DIRECTION('',(0.,1.));+#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1772 = ORIENTED_EDGE('',*,*,#1773,.T.);+#1773 = EDGE_CURVE('',#1746,#1774,#1776,.T.);+#1774 = VERTEX_POINT('',#1775);+#1775 = CARTESIAN_POINT('',(-0.85,-0.785,0.725));+#1776 = SURFACE_CURVE('',#1777,(#1781,#1788),.PCURVE_S1.);+#1777 = LINE('',#1778,#1779);+#1778 = CARTESIAN_POINT('',(-0.85,-1.165,0.725));+#1779 = VECTOR('',#1780,1.);+#1780 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1781 = PCURVE('',#1145,#1782);+#1782 = DEFINITIONAL_REPRESENTATION('',(#1783),#1787);+#1783 = LINE('',#1784,#1785);+#1784 = CARTESIAN_POINT('',(-0.85,2.6025));+#1785 = VECTOR('',#1786,1.);+#1786 = DIRECTION('',(1.633645143532E-16,-1.));+#1787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1788 = PCURVE('',#1789,#1794);+#1789 = CYLINDRICAL_SURFACE('',#1790,0.25);+#1790 = AXIS2_PLACEMENT_3D('',#1791,#1792,#1793);+#1791 = CARTESIAN_POINT('',(-0.85,-1.165,0.475));+#1792 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1793 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1794 = DEFINITIONAL_REPRESENTATION('',(#1795),#1799);+#1795 = LINE('',#1796,#1797);+#1796 = CARTESIAN_POINT('',(4.886921905584,0.));+#1797 = VECTOR('',#1798,1.);+#1798 = DIRECTION('',(0.,-1.));+#1799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1800 = ORIENTED_EDGE('',*,*,#1801,.T.);+#1801 = EDGE_CURVE('',#1774,#1802,#1804,.T.);+#1802 = VERTEX_POINT('',#1803);+#1803 = CARTESIAN_POINT('',(-0.8,-0.785,0.725));+#1804 = SURFACE_CURVE('',#1805,(#1809,#1816),.PCURVE_S1.);+#1805 = LINE('',#1806,#1807);+#1806 = CARTESIAN_POINT('',(-0.85,-0.785,0.725));+#1807 = VECTOR('',#1808,1.);+#1808 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1809 = PCURVE('',#1145,#1810);+#1810 = DEFINITIONAL_REPRESENTATION('',(#1811),#1815);+#1811 = LINE('',#1812,#1813);+#1812 = CARTESIAN_POINT('',(-0.85,2.2225));+#1813 = VECTOR('',#1814,1.);+#1814 = DIRECTION('',(1.,1.633645143532E-16));+#1815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1816 = PCURVE('',#1817,#1822);+#1817 = PLANE('',#1818);+#1818 = AXIS2_PLACEMENT_3D('',#1819,#1820,#1821);+#1819 = CARTESIAN_POINT('',(-1.065218773576,-0.785,0.347850445948));+#1820 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1821 = DIRECTION('',(0.,-0.,1.));+#1822 = DEFINITIONAL_REPRESENTATION('',(#1823),#1827);+#1823 = LINE('',#1824,#1825);+#1824 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1825 = VECTOR('',#1826,1.);+#1826 = DIRECTION('',(0.,1.));+#1827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1828 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1829 = EDGE_CURVE('',#1802,#1830,#1832,.T.);+#1830 = VERTEX_POINT('',#1831);+#1831 = CARTESIAN_POINT('',(-0.8,-0.515,0.725));+#1832 = SURFACE_CURVE('',#1833,(#1837,#1844),.PCURVE_S1.);+#1833 = LINE('',#1834,#1835);+#1834 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#1835 = VECTOR('',#1836,1.);+#1836 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1837 = PCURVE('',#1145,#1838);+#1838 = DEFINITIONAL_REPRESENTATION('',(#1839),#1843);+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(-0.8,2.7925));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(4.08998344385E-17,-1.));+#1843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1844 = PCURVE('',#446,#1845);+#1845 = DEFINITIONAL_REPRESENTATION('',(#1846),#1850);+#1846 = LINE('',#1847,#1848);+#1847 = CARTESIAN_POINT('',(0.,0.));+#1848 = VECTOR('',#1849,1.);+#1849 = DIRECTION('',(1.,0.));+#1850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1851 = ORIENTED_EDGE('',*,*,#1852,.F.);+#1852 = EDGE_CURVE('',#1853,#1830,#1855,.T.);+#1853 = VERTEX_POINT('',#1854);+#1854 = CARTESIAN_POINT('',(-0.85,-0.515,0.725));+#1855 = SURFACE_CURVE('',#1856,(#1860,#1867),.PCURVE_S1.);+#1856 = LINE('',#1857,#1858);+#1857 = CARTESIAN_POINT('',(-0.85,-0.515,0.725));+#1858 = VECTOR('',#1859,1.);+#1859 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1860 = PCURVE('',#1145,#1861);+#1861 = DEFINITIONAL_REPRESENTATION('',(#1862),#1866);+#1862 = LINE('',#1863,#1864);+#1863 = CARTESIAN_POINT('',(-0.85,1.9525));+#1864 = VECTOR('',#1865,1.);+#1865 = DIRECTION('',(1.,1.633645143532E-16));+#1866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1867 = PCURVE('',#1868,#1873);+#1868 = PLANE('',#1869);+#1869 = AXIS2_PLACEMENT_3D('',#1870,#1871,#1872);+#1870 = CARTESIAN_POINT('',(-1.065218773576,-0.515,0.347850445948));+#1871 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1872 = DIRECTION('',(0.,-0.,1.));+#1873 = DEFINITIONAL_REPRESENTATION('',(#1874),#1878);+#1874 = LINE('',#1875,#1876);+#1875 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1876 = VECTOR('',#1877,1.);+#1877 = DIRECTION('',(0.,1.));+#1878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1879 = ORIENTED_EDGE('',*,*,#1880,.T.);+#1880 = EDGE_CURVE('',#1853,#1881,#1883,.T.);+#1881 = VERTEX_POINT('',#1882);+#1882 = CARTESIAN_POINT('',(-0.85,-0.135,0.725));+#1883 = SURFACE_CURVE('',#1884,(#1888,#1895),.PCURVE_S1.);+#1884 = LINE('',#1885,#1886);+#1885 = CARTESIAN_POINT('',(-0.85,-0.515,0.725));+#1886 = VECTOR('',#1887,1.);+#1887 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1888 = PCURVE('',#1145,#1889);+#1889 = DEFINITIONAL_REPRESENTATION('',(#1890),#1894);+#1890 = LINE('',#1891,#1892);+#1891 = CARTESIAN_POINT('',(-0.85,1.9525));+#1892 = VECTOR('',#1893,1.);+#1893 = DIRECTION('',(1.633645143532E-16,-1.));+#1894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1895 = PCURVE('',#1896,#1901);+#1896 = CYLINDRICAL_SURFACE('',#1897,0.25);+#1897 = AXIS2_PLACEMENT_3D('',#1898,#1899,#1900);+#1898 = CARTESIAN_POINT('',(-0.85,-0.515,0.475));+#1899 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1900 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1901 = DEFINITIONAL_REPRESENTATION('',(#1902),#1906);+#1902 = LINE('',#1903,#1904);+#1903 = CARTESIAN_POINT('',(4.886921905584,0.));+#1904 = VECTOR('',#1905,1.);+#1905 = DIRECTION('',(0.,-1.));+#1906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1907 = ORIENTED_EDGE('',*,*,#1908,.T.);+#1908 = EDGE_CURVE('',#1881,#1909,#1911,.T.);+#1909 = VERTEX_POINT('',#1910);+#1910 = CARTESIAN_POINT('',(-0.8,-0.135,0.725));+#1911 = SURFACE_CURVE('',#1912,(#1916,#1923),.PCURVE_S1.);+#1912 = LINE('',#1913,#1914);+#1913 = CARTESIAN_POINT('',(-0.85,-0.135,0.725));+#1914 = VECTOR('',#1915,1.);+#1915 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1916 = PCURVE('',#1145,#1917);+#1917 = DEFINITIONAL_REPRESENTATION('',(#1918),#1922);+#1918 = LINE('',#1919,#1920);+#1919 = CARTESIAN_POINT('',(-0.85,1.5725));+#1920 = VECTOR('',#1921,1.);+#1921 = DIRECTION('',(1.,1.633645143532E-16));+#1922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1923 = PCURVE('',#1924,#1929);+#1924 = PLANE('',#1925);+#1925 = AXIS2_PLACEMENT_3D('',#1926,#1927,#1928);+#1926 = CARTESIAN_POINT('',(-1.065218773576,-0.135,0.347850445948));+#1927 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1928 = DIRECTION('',(0.,-0.,1.));+#1929 = DEFINITIONAL_REPRESENTATION('',(#1930),#1934);+#1930 = LINE('',#1931,#1932);+#1931 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1932 = VECTOR('',#1933,1.);+#1933 = DIRECTION('',(0.,1.));+#1934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1935 = ORIENTED_EDGE('',*,*,#1936,.T.);+#1936 = EDGE_CURVE('',#1909,#1937,#1939,.T.);+#1937 = VERTEX_POINT('',#1938);+#1938 = CARTESIAN_POINT('',(-0.8,0.135,0.725));+#1939 = SURFACE_CURVE('',#1940,(#1944,#1951),.PCURVE_S1.);+#1940 = LINE('',#1941,#1942);+#1941 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#1942 = VECTOR('',#1943,1.);+#1943 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1944 = PCURVE('',#1145,#1945);+#1945 = DEFINITIONAL_REPRESENTATION('',(#1946),#1950);+#1946 = LINE('',#1947,#1948);+#1947 = CARTESIAN_POINT('',(-0.8,2.7925));+#1948 = VECTOR('',#1949,1.);+#1949 = DIRECTION('',(4.08998344385E-17,-1.));+#1950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1951 = PCURVE('',#390,#1952);+#1952 = DEFINITIONAL_REPRESENTATION('',(#1953),#1957);+#1953 = LINE('',#1954,#1955);+#1954 = CARTESIAN_POINT('',(0.,0.));+#1955 = VECTOR('',#1956,1.);+#1956 = DIRECTION('',(1.,0.));+#1957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1958 = ORIENTED_EDGE('',*,*,#1959,.F.);+#1959 = EDGE_CURVE('',#1960,#1937,#1962,.T.);+#1960 = VERTEX_POINT('',#1961);+#1961 = CARTESIAN_POINT('',(-0.85,0.135,0.725));+#1962 = SURFACE_CURVE('',#1963,(#1967,#1974),.PCURVE_S1.);+#1963 = LINE('',#1964,#1965);+#1964 = CARTESIAN_POINT('',(-0.85,0.135,0.725));+#1965 = VECTOR('',#1966,1.);+#1966 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1967 = PCURVE('',#1145,#1968);+#1968 = DEFINITIONAL_REPRESENTATION('',(#1969),#1973);+#1969 = LINE('',#1970,#1971);+#1970 = CARTESIAN_POINT('',(-0.85,1.3025));+#1971 = VECTOR('',#1972,1.);+#1972 = DIRECTION('',(1.,1.633645143532E-16));+#1973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1974 = PCURVE('',#1975,#1980);+#1975 = PLANE('',#1976);+#1976 = AXIS2_PLACEMENT_3D('',#1977,#1978,#1979);+#1977 = CARTESIAN_POINT('',(-1.065218773576,0.135,0.347850445948));+#1978 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1979 = DIRECTION('',(0.,-0.,1.));+#1980 = DEFINITIONAL_REPRESENTATION('',(#1981),#1985);+#1981 = LINE('',#1982,#1983);+#1982 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#1983 = VECTOR('',#1984,1.);+#1984 = DIRECTION('',(0.,1.));+#1985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1986 = ORIENTED_EDGE('',*,*,#1987,.T.);+#1987 = EDGE_CURVE('',#1960,#1988,#1990,.T.);+#1988 = VERTEX_POINT('',#1989);+#1989 = CARTESIAN_POINT('',(-0.85,0.515,0.725));+#1990 = SURFACE_CURVE('',#1991,(#1995,#2002),.PCURVE_S1.);+#1991 = LINE('',#1992,#1993);+#1992 = CARTESIAN_POINT('',(-0.85,0.135,0.725));+#1993 = VECTOR('',#1994,1.);+#1994 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1995 = PCURVE('',#1145,#1996);+#1996 = DEFINITIONAL_REPRESENTATION('',(#1997),#2001);+#1997 = LINE('',#1998,#1999);+#1998 = CARTESIAN_POINT('',(-0.85,1.3025));+#1999 = VECTOR('',#2000,1.);+#2000 = DIRECTION('',(1.633645143532E-16,-1.));+#2001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2002 = PCURVE('',#2003,#2008);+#2003 = CYLINDRICAL_SURFACE('',#2004,0.25);+#2004 = AXIS2_PLACEMENT_3D('',#2005,#2006,#2007);+#2005 = CARTESIAN_POINT('',(-0.85,0.135,0.475));+#2006 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2007 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2008 = DEFINITIONAL_REPRESENTATION('',(#2009),#2013);+#2009 = LINE('',#2010,#2011);+#2010 = CARTESIAN_POINT('',(4.886921905584,0.));+#2011 = VECTOR('',#2012,1.);+#2012 = DIRECTION('',(0.,-1.));+#2013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2014 = ORIENTED_EDGE('',*,*,#2015,.T.);+#2015 = EDGE_CURVE('',#1988,#2016,#2018,.T.);+#2016 = VERTEX_POINT('',#2017);+#2017 = CARTESIAN_POINT('',(-0.8,0.515,0.725));+#2018 = SURFACE_CURVE('',#2019,(#2023,#2030),.PCURVE_S1.);+#2019 = LINE('',#2020,#2021);+#2020 = CARTESIAN_POINT('',(-0.85,0.515,0.725));+#2021 = VECTOR('',#2022,1.);+#2022 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2023 = PCURVE('',#1145,#2024);+#2024 = DEFINITIONAL_REPRESENTATION('',(#2025),#2029);+#2025 = LINE('',#2026,#2027);+#2026 = CARTESIAN_POINT('',(-0.85,0.9225));+#2027 = VECTOR('',#2028,1.);+#2028 = DIRECTION('',(1.,1.633645143532E-16));+#2029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2030 = PCURVE('',#2031,#2036);+#2031 = PLANE('',#2032);+#2032 = AXIS2_PLACEMENT_3D('',#2033,#2034,#2035);+#2033 = CARTESIAN_POINT('',(-1.065218773576,0.515,0.347850445948));+#2034 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2035 = DIRECTION('',(0.,-0.,1.));+#2036 = DEFINITIONAL_REPRESENTATION('',(#2037),#2041);+#2037 = LINE('',#2038,#2039);+#2038 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#2039 = VECTOR('',#2040,1.);+#2040 = DIRECTION('',(0.,1.));+#2041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2042 = ORIENTED_EDGE('',*,*,#2043,.T.);+#2043 = EDGE_CURVE('',#2016,#2044,#2046,.T.);+#2044 = VERTEX_POINT('',#2045);+#2045 = CARTESIAN_POINT('',(-0.8,0.785,0.725));+#2046 = SURFACE_CURVE('',#2047,(#2051,#2058),.PCURVE_S1.);+#2047 = LINE('',#2048,#2049);+#2048 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#2049 = VECTOR('',#2050,1.);+#2050 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2051 = PCURVE('',#1145,#2052);+#2052 = DEFINITIONAL_REPRESENTATION('',(#2053),#2057);+#2053 = LINE('',#2054,#2055);+#2054 = CARTESIAN_POINT('',(-0.8,2.7925));+#2055 = VECTOR('',#2056,1.);+#2056 = DIRECTION('',(4.08998344385E-17,-1.));+#2057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2058 = PCURVE('',#334,#2059);+#2059 = DEFINITIONAL_REPRESENTATION('',(#2060),#2064);+#2060 = LINE('',#2061,#2062);+#2061 = CARTESIAN_POINT('',(0.,0.));+#2062 = VECTOR('',#2063,1.);+#2063 = DIRECTION('',(1.,0.));+#2064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2065 = ORIENTED_EDGE('',*,*,#2066,.F.);+#2066 = EDGE_CURVE('',#2067,#2044,#2069,.T.);+#2067 = VERTEX_POINT('',#2068);+#2068 = CARTESIAN_POINT('',(-0.85,0.785,0.725));+#2069 = SURFACE_CURVE('',#2070,(#2074,#2081),.PCURVE_S1.);+#2070 = LINE('',#2071,#2072);+#2071 = CARTESIAN_POINT('',(-0.85,0.785,0.725));+#2072 = VECTOR('',#2073,1.);+#2073 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2074 = PCURVE('',#1145,#2075);+#2075 = DEFINITIONAL_REPRESENTATION('',(#2076),#2080);+#2076 = LINE('',#2077,#2078);+#2077 = CARTESIAN_POINT('',(-0.85,0.6525));+#2078 = VECTOR('',#2079,1.);+#2079 = DIRECTION('',(1.,1.633645143532E-16));+#2080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2081 = PCURVE('',#2082,#2087);+#2082 = PLANE('',#2083);+#2083 = AXIS2_PLACEMENT_3D('',#2084,#2085,#2086);+#2084 = CARTESIAN_POINT('',(-1.065218773576,0.785,0.347850445948));+#2085 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2086 = DIRECTION('',(0.,-0.,1.));+#2087 = DEFINITIONAL_REPRESENTATION('',(#2088),#2092);+#2088 = LINE('',#2089,#2090);+#2089 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#2090 = VECTOR('',#2091,1.);+#2091 = DIRECTION('',(0.,1.));+#2092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2093 = ORIENTED_EDGE('',*,*,#2094,.T.);+#2094 = EDGE_CURVE('',#2067,#2095,#2097,.T.);+#2095 = VERTEX_POINT('',#2096);+#2096 = CARTESIAN_POINT('',(-0.85,1.165,0.725));+#2097 = SURFACE_CURVE('',#2098,(#2102,#2109),.PCURVE_S1.);+#2098 = LINE('',#2099,#2100);+#2099 = CARTESIAN_POINT('',(-0.85,0.785,0.725));+#2100 = VECTOR('',#2101,1.);+#2101 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2102 = PCURVE('',#1145,#2103);+#2103 = DEFINITIONAL_REPRESENTATION('',(#2104),#2108);+#2104 = LINE('',#2105,#2106);+#2105 = CARTESIAN_POINT('',(-0.85,0.6525));+#2106 = VECTOR('',#2107,1.);+#2107 = DIRECTION('',(1.633645143532E-16,-1.));+#2108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2109 = PCURVE('',#2110,#2115);+#2110 = CYLINDRICAL_SURFACE('',#2111,0.25);+#2111 = AXIS2_PLACEMENT_3D('',#2112,#2113,#2114);+#2112 = CARTESIAN_POINT('',(-0.85,0.785,0.475));+#2113 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2114 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2115 = DEFINITIONAL_REPRESENTATION('',(#2116),#2120);+#2116 = LINE('',#2117,#2118);+#2117 = CARTESIAN_POINT('',(4.886921905584,0.));+#2118 = VECTOR('',#2119,1.);+#2119 = DIRECTION('',(0.,-1.));+#2120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2121 = ORIENTED_EDGE('',*,*,#2122,.T.);+#2122 = EDGE_CURVE('',#2095,#2123,#2125,.T.);+#2123 = VERTEX_POINT('',#2124);+#2124 = CARTESIAN_POINT('',(-0.8,1.165,0.725));+#2125 = SURFACE_CURVE('',#2126,(#2130,#2137),.PCURVE_S1.);+#2126 = LINE('',#2127,#2128);+#2127 = CARTESIAN_POINT('',(-0.85,1.165,0.725));+#2128 = VECTOR('',#2129,1.);+#2129 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2130 = PCURVE('',#1145,#2131);+#2131 = DEFINITIONAL_REPRESENTATION('',(#2132),#2136);+#2132 = LINE('',#2133,#2134);+#2133 = CARTESIAN_POINT('',(-0.85,0.2725));+#2134 = VECTOR('',#2135,1.);+#2135 = DIRECTION('',(1.,1.633645143532E-16));+#2136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2137 = PCURVE('',#2138,#2143);+#2138 = PLANE('',#2139);+#2139 = AXIS2_PLACEMENT_3D('',#2140,#2141,#2142);+#2140 = CARTESIAN_POINT('',(-1.065218773576,1.165,0.347850445948));+#2141 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2142 = DIRECTION('',(0.,-0.,1.));+#2143 = DEFINITIONAL_REPRESENTATION('',(#2144),#2148);+#2144 = LINE('',#2145,#2146);+#2145 = CARTESIAN_POINT('',(0.377149554052,0.215218773576));+#2146 = VECTOR('',#2147,1.);+#2147 = DIRECTION('',(0.,1.));+#2148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2149 = ORIENTED_EDGE('',*,*,#2150,.T.);+#2150 = EDGE_CURVE('',#2123,#1161,#2151,.T.);+#2151 = SURFACE_CURVE('',#2152,(#2156,#2163),.PCURVE_S1.);+#2152 = LINE('',#2153,#2154);+#2153 = CARTESIAN_POINT('',(-0.8,-1.355,0.725));+#2154 = VECTOR('',#2155,1.);+#2155 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2156 = PCURVE('',#1145,#2157);+#2157 = DEFINITIONAL_REPRESENTATION('',(#2158),#2162);+#2158 = LINE('',#2159,#2160);+#2159 = CARTESIAN_POINT('',(-0.8,2.7925));+#2160 = VECTOR('',#2161,1.);+#2161 = DIRECTION('',(4.08998344385E-17,-1.));+#2162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2163 = PCURVE('',#278,#2164);+#2164 = DEFINITIONAL_REPRESENTATION('',(#2165),#2169);+#2165 = LINE('',#2166,#2167);+#2166 = CARTESIAN_POINT('',(0.,0.));+#2167 = VECTOR('',#2168,1.);+#2168 = DIRECTION('',(1.,0.));+#2169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2170 = FACE_BOUND('',#2171,.F.);+#2171 = EDGE_LOOP('',(#2172,#2202,#2230,#2258,#2286,#2314,#2342,#2370));+#2172 = ORIENTED_EDGE('',*,*,#2173,.F.);+#2173 = EDGE_CURVE('',#2174,#2176,#2178,.T.);+#2174 = VERTEX_POINT('',#2175);+#2175 = CARTESIAN_POINT('',(0.775,1.3425,0.725));+#2176 = VERTEX_POINT('',#2177);+#2177 = CARTESIAN_POINT('',(0.775,-1.3425,0.725));+#2178 = SURFACE_CURVE('',#2179,(#2183,#2190),.PCURVE_S1.);+#2179 = LINE('',#2180,#2181);+#2180 = CARTESIAN_POINT('',(0.775,1.3425,0.725));+#2181 = VECTOR('',#2182,1.);+#2182 = DIRECTION('',(0.,-1.,0.));+#2183 = PCURVE('',#1145,#2184);+#2184 = DEFINITIONAL_REPRESENTATION('',(#2185),#2189);+#2185 = LINE('',#2186,#2187);+#2186 = CARTESIAN_POINT('',(0.775,9.5E-02));+#2187 = VECTOR('',#2188,1.);+#2188 = DIRECTION('',(-1.51922136901E-16,1.));+#2189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2190 = PCURVE('',#2191,#2196);+#2191 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2192,#2193)+ ,(#2194,#2195+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2192 = CARTESIAN_POINT('',(0.775,1.3425,0.725));+#2193 = CARTESIAN_POINT('',(0.708243103516,1.309121551758,1.2));+#2194 = CARTESIAN_POINT('',(0.775,-1.3425,0.725));+#2195 = CARTESIAN_POINT('',(0.708243103516,-1.309121551758,1.2));+#2196 = DEFINITIONAL_REPRESENTATION('',(#2197),#2201);+#2197 = LINE('',#2198,#2199);+#2198 = CARTESIAN_POINT('',(-7.587901680913E-17,-3.201840775164E-17));+#2199 = VECTOR('',#2200,1.);+#2200 = DIRECTION('',(1.,6.725520478536E-16));+#2201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2202 = ORIENTED_EDGE('',*,*,#2203,.F.);+#2203 = EDGE_CURVE('',#2204,#2174,#2206,.T.);+#2204 = VERTEX_POINT('',#2205);+#2205 = CARTESIAN_POINT('',(0.6925,1.425,0.725));+#2206 = SURFACE_CURVE('',#2207,(#2211,#2218),.PCURVE_S1.);+#2207 = LINE('',#2208,#2209);+#2208 = CARTESIAN_POINT('',(0.6925,1.425,0.725));+#2209 = VECTOR('',#2210,1.);+#2210 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2211 = PCURVE('',#1145,#2212);+#2212 = DEFINITIONAL_REPRESENTATION('',(#2213),#2217);+#2213 = LINE('',#2214,#2215);+#2214 = CARTESIAN_POINT('',(0.6925,1.25E-02));+#2215 = VECTOR('',#2216,1.);+#2216 = DIRECTION('',(0.707106781187,0.707106781187));+#2217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2218 = PCURVE('',#2219,#2224);+#2219 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2220,#2221)+ ,(#2222,#2223+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2220 = CARTESIAN_POINT('',(0.6925,1.425,0.725));+#2221 = CARTESIAN_POINT('',(0.659121551758,1.358243103516,1.2));+#2222 = CARTESIAN_POINT('',(0.775,1.3425,0.725));+#2223 = CARTESIAN_POINT('',(0.708243103516,1.309121551758,1.2));+#2224 = DEFINITIONAL_REPRESENTATION('',(#2225),#2229);+#2225 = LINE('',#2226,#2227);+#2226 = CARTESIAN_POINT('',(-1.458783908728E-16,1.218467498047E-17));+#2227 = VECTOR('',#2228,1.);+#2228 = DIRECTION('',(1.,2.166486280002E-15));+#2229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2230 = ORIENTED_EDGE('',*,*,#2231,.F.);+#2231 = EDGE_CURVE('',#2232,#2204,#2234,.T.);+#2232 = VERTEX_POINT('',#2233);+#2233 = CARTESIAN_POINT('',(-0.6925,1.425,0.725));+#2234 = SURFACE_CURVE('',#2235,(#2239,#2246),.PCURVE_S1.);+#2235 = LINE('',#2236,#2237);+#2236 = CARTESIAN_POINT('',(-0.6925,1.425,0.725));+#2237 = VECTOR('',#2238,1.);+#2238 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2239 = PCURVE('',#1145,#2240);+#2240 = DEFINITIONAL_REPRESENTATION('',(#2241),#2245);+#2241 = LINE('',#2242,#2243);+#2242 = CARTESIAN_POINT('',(-0.6925,1.25E-02));+#2243 = VECTOR('',#2244,1.);+#2244 = DIRECTION('',(1.,4.08998344385E-17));+#2245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2246 = PCURVE('',#2247,#2252);+#2247 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2248,#2249)+ ,(#2250,#2251+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2248 = CARTESIAN_POINT('',(-0.6925,1.425,0.725));+#2249 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#2250 = CARTESIAN_POINT('',(0.6925,1.425,0.725));+#2251 = CARTESIAN_POINT('',(0.659121551758,1.358243103516,1.2));+#2252 = DEFINITIONAL_REPRESENTATION('',(#2253),#2257);+#2253 = LINE('',#2254,#2255);+#2254 = CARTESIAN_POINT('',(1.423222469141E-16,-1.577784235436E-17));+#2255 = VECTOR('',#2256,1.);+#2256 = DIRECTION('',(1.,-9.308412743639E-17));+#2257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2258 = ORIENTED_EDGE('',*,*,#2259,.F.);+#2259 = EDGE_CURVE('',#2260,#2232,#2262,.T.);+#2260 = VERTEX_POINT('',#2261);+#2261 = CARTESIAN_POINT('',(-0.775,1.3425,0.725));+#2262 = SURFACE_CURVE('',#2263,(#2267,#2274),.PCURVE_S1.);+#2263 = LINE('',#2264,#2265);+#2264 = CARTESIAN_POINT('',(-0.775,1.3425,0.725));+#2265 = VECTOR('',#2266,1.);+#2266 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2267 = PCURVE('',#1145,#2268);+#2268 = DEFINITIONAL_REPRESENTATION('',(#2269),#2273);+#2269 = LINE('',#2270,#2271);+#2270 = CARTESIAN_POINT('',(-0.775,9.5E-02));+#2271 = VECTOR('',#2272,1.);+#2272 = DIRECTION('',(0.707106781187,-0.707106781187));+#2273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2274 = PCURVE('',#2275,#2280);+#2275 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2276,#2277)+ ,(#2278,#2279+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2276 = CARTESIAN_POINT('',(-0.775,1.3425,0.725));+#2277 = CARTESIAN_POINT('',(-0.708243103516,1.309121551758,1.2));+#2278 = CARTESIAN_POINT('',(-0.6925,1.425,0.725));+#2279 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#2280 = DEFINITIONAL_REPRESENTATION('',(#2281),#2285);+#2281 = LINE('',#2282,#2283);+#2282 = CARTESIAN_POINT('',(1.670315671762E-16,6.04274082121E-17));+#2283 = VECTOR('',#2284,1.);+#2284 = DIRECTION('',(1.,-2.068419107185E-16));+#2285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2286 = ORIENTED_EDGE('',*,*,#2287,.F.);+#2287 = EDGE_CURVE('',#2288,#2260,#2290,.T.);+#2288 = VERTEX_POINT('',#2289);+#2289 = CARTESIAN_POINT('',(-0.775,-1.3425,0.725));+#2290 = SURFACE_CURVE('',#2291,(#2295,#2302),.PCURVE_S1.);+#2291 = LINE('',#2292,#2293);+#2292 = CARTESIAN_POINT('',(-0.775,-1.3425,0.725));+#2293 = VECTOR('',#2294,1.);+#2294 = DIRECTION('',(0.,1.,0.));+#2295 = PCURVE('',#1145,#2296);+#2296 = DEFINITIONAL_REPRESENTATION('',(#2297),#2301);+#2297 = LINE('',#2298,#2299);+#2298 = CARTESIAN_POINT('',(-0.775,2.78));+#2299 = VECTOR('',#2300,1.);+#2300 = DIRECTION('',(1.51922136901E-16,-1.));+#2301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2302 = PCURVE('',#2303,#2308);+#2303 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2304,#2305)+ ,(#2306,#2307+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2304 = CARTESIAN_POINT('',(-0.775,-1.3425,0.725));+#2305 = CARTESIAN_POINT('',(-0.708243103516,-1.309121551758,1.2));+#2306 = CARTESIAN_POINT('',(-0.775,1.3425,0.725));+#2307 = CARTESIAN_POINT('',(-0.708243103516,1.309121551758,1.2));+#2308 = DEFINITIONAL_REPRESENTATION('',(#2309),#2313);+#2309 = LINE('',#2310,#2311);+#2310 = CARTESIAN_POINT('',(-7.587901680913E-17,-3.201840775164E-17));+#2311 = VECTOR('',#2312,1.);+#2312 = DIRECTION('',(1.,6.725520478536E-16));+#2313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2314 = ORIENTED_EDGE('',*,*,#2315,.F.);+#2315 = EDGE_CURVE('',#2316,#2288,#2318,.T.);+#2316 = VERTEX_POINT('',#2317);+#2317 = CARTESIAN_POINT('',(-0.6925,-1.425,0.725));+#2318 = SURFACE_CURVE('',#2319,(#2323,#2330),.PCURVE_S1.);+#2319 = LINE('',#2320,#2321);+#2320 = CARTESIAN_POINT('',(-0.6925,-1.425,0.725));+#2321 = VECTOR('',#2322,1.);+#2322 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2323 = PCURVE('',#1145,#2324);+#2324 = DEFINITIONAL_REPRESENTATION('',(#2325),#2329);+#2325 = LINE('',#2326,#2327);+#2326 = CARTESIAN_POINT('',(-0.6925,2.8625));+#2327 = VECTOR('',#2328,1.);+#2328 = DIRECTION('',(-0.707106781187,-0.707106781187));+#2329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2330 = PCURVE('',#2331,#2336);+#2331 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2332,#2333)+ ,(#2334,#2335+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2332 = CARTESIAN_POINT('',(-0.6925,-1.425,0.725));+#2333 = CARTESIAN_POINT('',(-0.659121551758,-1.358243103516,1.2));+#2334 = CARTESIAN_POINT('',(-0.775,-1.3425,0.725));+#2335 = CARTESIAN_POINT('',(-0.708243103516,-1.309121551758,1.2));+#2336 = DEFINITIONAL_REPRESENTATION('',(#2337),#2341);+#2337 = LINE('',#2338,#2339);+#2338 = CARTESIAN_POINT('',(-1.458783908728E-16,1.218467498047E-17));+#2339 = VECTOR('',#2340,1.);+#2340 = DIRECTION('',(1.,2.166486280002E-15));+#2341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2342 = ORIENTED_EDGE('',*,*,#2343,.F.);+#2343 = EDGE_CURVE('',#2344,#2316,#2346,.T.);+#2344 = VERTEX_POINT('',#2345);+#2345 = CARTESIAN_POINT('',(0.6925,-1.425,0.725));+#2346 = SURFACE_CURVE('',#2347,(#2351,#2358),.PCURVE_S1.);+#2347 = LINE('',#2348,#2349);+#2348 = CARTESIAN_POINT('',(0.6925,-1.425,0.725));+#2349 = VECTOR('',#2350,1.);+#2350 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2351 = PCURVE('',#1145,#2352);+#2352 = DEFINITIONAL_REPRESENTATION('',(#2353),#2357);+#2353 = LINE('',#2354,#2355);+#2354 = CARTESIAN_POINT('',(0.6925,2.8625));+#2355 = VECTOR('',#2356,1.);+#2356 = DIRECTION('',(-1.,-4.08998344385E-17));+#2357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2358 = PCURVE('',#2359,#2364);+#2359 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2360,#2361)+ ,(#2362,#2363+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2360 = CARTESIAN_POINT('',(0.6925,-1.425,0.725));+#2361 = CARTESIAN_POINT('',(0.659121551758,-1.358243103516,1.2));+#2362 = CARTESIAN_POINT('',(-0.6925,-1.425,0.725));+#2363 = CARTESIAN_POINT('',(-0.659121551758,-1.358243103516,1.2));+#2364 = DEFINITIONAL_REPRESENTATION('',(#2365),#2369);+#2365 = LINE('',#2366,#2367);+#2366 = CARTESIAN_POINT('',(1.423222469141E-16,-1.577784235436E-17));+#2367 = VECTOR('',#2368,1.);+#2368 = DIRECTION('',(1.,-9.308412743639E-17));+#2369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2370 = ORIENTED_EDGE('',*,*,#2371,.F.);+#2371 = EDGE_CURVE('',#2176,#2344,#2372,.T.);+#2372 = SURFACE_CURVE('',#2373,(#2377,#2384),.PCURVE_S1.);+#2373 = LINE('',#2374,#2375);+#2374 = CARTESIAN_POINT('',(0.775,-1.3425,0.725));+#2375 = VECTOR('',#2376,1.);+#2376 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2377 = PCURVE('',#1145,#2378);+#2378 = DEFINITIONAL_REPRESENTATION('',(#2379),#2383);+#2379 = LINE('',#2380,#2381);+#2380 = CARTESIAN_POINT('',(0.775,2.78));+#2381 = VECTOR('',#2382,1.);+#2382 = DIRECTION('',(-0.707106781187,0.707106781187));+#2383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2384 = PCURVE('',#2385,#2390);+#2385 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2386,#2387)+ ,(#2388,#2389+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2386 = CARTESIAN_POINT('',(0.775,-1.3425,0.725));+#2387 = CARTESIAN_POINT('',(0.708243103516,-1.309121551758,1.2));+#2388 = CARTESIAN_POINT('',(0.6925,-1.425,0.725));+#2389 = CARTESIAN_POINT('',(0.659121551758,-1.358243103516,1.2));+#2390 = DEFINITIONAL_REPRESENTATION('',(#2391),#2395);+#2391 = LINE('',#2392,#2393);+#2392 = CARTESIAN_POINT('',(1.670315671762E-16,6.04274082121E-17));+#2393 = VECTOR('',#2394,1.);+#2394 = DIRECTION('',(1.,-2.068419107185E-16));+#2395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2396 = ADVANCED_FACE('',(#2397),#2385,.F.);+#2397 = FACE_BOUND('',#2398,.F.);+#2398 = EDGE_LOOP('',(#2399,#2400,#2422,#2449));+#2399 = ORIENTED_EDGE('',*,*,#2371,.T.);+#2400 = ORIENTED_EDGE('',*,*,#2401,.T.);+#2401 = EDGE_CURVE('',#2344,#2402,#2404,.T.);+#2402 = VERTEX_POINT('',#2403);+#2403 = CARTESIAN_POINT('',(0.659121551758,-1.358243103516,1.2));+#2404 = SURFACE_CURVE('',#2405,(#2408,#2415),.PCURVE_S1.);+#2405 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2406,#2407),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2406 = CARTESIAN_POINT('',(0.6925,-1.425,0.725));+#2407 = CARTESIAN_POINT('',(0.659121551758,-1.358243103516,1.2));+#2408 = PCURVE('',#2385,#2409);+#2409 = DEFINITIONAL_REPRESENTATION('',(#2410),#2414);+#2410 = LINE('',#2411,#2412);+#2411 = CARTESIAN_POINT('',(0.116672618896,1.219358296304E-17));+#2412 = VECTOR('',#2413,1.);+#2413 = DIRECTION('',(6.938893903907E-17,1.));+#2414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2415 = PCURVE('',#2359,#2416);+#2416 = DEFINITIONAL_REPRESENTATION('',(#2417),#2421);+#2417 = LINE('',#2418,#2419);+#2418 = CARTESIAN_POINT('',(1.423222469141E-16,-1.577784235436E-17));+#2419 = VECTOR('',#2420,1.);+#2420 = DIRECTION('',(2.598611130672E-17,1.));+#2421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2422 = ORIENTED_EDGE('',*,*,#2423,.F.);+#2423 = EDGE_CURVE('',#2424,#2402,#2426,.T.);+#2424 = VERTEX_POINT('',#2425);+#2425 = CARTESIAN_POINT('',(0.708243103516,-1.309121551758,1.2));+#2426 = SURFACE_CURVE('',#2427,(#2431,#2437),.PCURVE_S1.);+#2427 = LINE('',#2428,#2429);+#2428 = CARTESIAN_POINT('',(0.708243103516,-1.309121551758,1.2));+#2429 = VECTOR('',#2430,1.);+#2430 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2431 = PCURVE('',#2385,#2432);+#2432 = DEFINITIONAL_REPRESENTATION('',(#2433),#2436);+#2433 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2434,#2435),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,6.946836470098E-02),.PIECEWISE_BEZIER_KNOTS.);+#2434 = CARTESIAN_POINT('',(1.775996785878E-16,1.));+#2435 = CARTESIAN_POINT('',(0.116672618896,1.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2437 = PCURVE('',#2438,#2443);+#2438 = PLANE('',#2439);+#2439 = AXIS2_PLACEMENT_3D('',#2440,#2441,#2442);+#2440 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#2441 = DIRECTION('',(0.,0.,1.));+#2442 = DIRECTION('',(0.43658423493,-0.899663384723,0.));+#2443 = DEFINITIONAL_REPRESENTATION('',(#2444),#2448);+#2444 = LINE('',#2445,#2446);+#2445 = CARTESIAN_POINT('',(2.996700165946,6.563855661095E-02));+#2446 = VECTOR('',#2447,1.);+#2447 = DIRECTION('',(0.327446407044,-0.944869753201));+#2448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2449 = ORIENTED_EDGE('',*,*,#2450,.F.);+#2450 = EDGE_CURVE('',#2176,#2424,#2451,.T.);+#2451 = SURFACE_CURVE('',#2452,(#2455,#2462),.PCURVE_S1.);+#2452 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2453,#2454),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2453 = CARTESIAN_POINT('',(0.775,-1.3425,0.725));+#2454 = CARTESIAN_POINT('',(0.708243103516,-1.309121551758,1.2));+#2455 = PCURVE('',#2385,#2456);+#2456 = DEFINITIONAL_REPRESENTATION('',(#2457),#2461);+#2457 = LINE('',#2458,#2459);+#2458 = CARTESIAN_POINT('',(1.670315671762E-16,6.04274082121E-17));+#2459 = VECTOR('',#2460,1.);+#2460 = DIRECTION('',(1.452832823571E-16,1.));+#2461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2462 = PCURVE('',#2191,#2463);+#2463 = DEFINITIONAL_REPRESENTATION('',(#2464),#2468);+#2464 = LINE('',#2465,#2466);+#2465 = CARTESIAN_POINT('',(2.685,2.654163288001E-16));+#2466 = VECTOR('',#2467,1.);+#2467 = DIRECTION('',(0.,1.));+#2468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2469 = ADVANCED_FACE('',(#2470,#2625,#2843,#3169,#3360,#3587,#4174,+ #4473,#4772),#2438,.T.);+#2470 = FACE_BOUND('',#2471,.T.);+#2471 = EDGE_LOOP('',(#2472,#2496,#2518,#2540,#2562,#2582,#2583,#2605));+#2472 = ORIENTED_EDGE('',*,*,#2473,.F.);+#2473 = EDGE_CURVE('',#2474,#2476,#2478,.T.);+#2474 = VERTEX_POINT('',#2475);+#2475 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#2476 = VERTEX_POINT('',#2477);+#2477 = CARTESIAN_POINT('',(0.659121551758,1.358243103516,1.2));+#2478 = SURFACE_CURVE('',#2479,(#2483,#2490),.PCURVE_S1.);+#2479 = LINE('',#2480,#2481);+#2480 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#2481 = VECTOR('',#2482,1.);+#2482 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2483 = PCURVE('',#2438,#2484);+#2484 = DEFINITIONAL_REPRESENTATION('',(#2485),#2489);+#2485 = LINE('',#2486,#2487);+#2486 = CARTESIAN_POINT('',(0.,0.));+#2487 = VECTOR('',#2488,1.);+#2488 = DIRECTION('',(0.43658423493,0.899663384723));+#2489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2490 = PCURVE('',#2247,#2491);+#2491 = DEFINITIONAL_REPRESENTATION('',(#2492),#2495);+#2492 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2493,#2494),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.318243103516),.PIECEWISE_BEZIER_KNOTS.);+#2493 = CARTESIAN_POINT('',(4.940449035909E-17,1.));+#2494 = CARTESIAN_POINT('',(1.385,1.));+#2495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2496 = ORIENTED_EDGE('',*,*,#2497,.F.);+#2497 = EDGE_CURVE('',#2498,#2474,#2500,.T.);+#2498 = VERTEX_POINT('',#2499);+#2499 = CARTESIAN_POINT('',(-0.708243103516,1.309121551758,1.2));+#2500 = SURFACE_CURVE('',#2501,(#2505,#2512),.PCURVE_S1.);+#2501 = LINE('',#2502,#2503);+#2502 = CARTESIAN_POINT('',(-0.708243103516,1.309121551758,1.2));+#2503 = VECTOR('',#2504,1.);+#2504 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2505 = PCURVE('',#2438,#2506);+#2506 = DEFINITIONAL_REPRESENTATION('',(#2507),#2511);+#2507 = LINE('',#2508,#2509);+#2508 = CARTESIAN_POINT('',(2.274716642457E-02,-6.563855661028E-02));+#2509 = VECTOR('',#2510,1.);+#2510 = DIRECTION('',(-0.327446407044,0.944869753201));+#2511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2512 = PCURVE('',#2275,#2513);+#2513 = DEFINITIONAL_REPRESENTATION('',(#2514),#2517);+#2514 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2515,#2516),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,6.946836470098E-02),.PIECEWISE_BEZIER_KNOTS.);+#2515 = CARTESIAN_POINT('',(1.775996785878E-16,1.));+#2516 = CARTESIAN_POINT('',(0.116672618896,1.));+#2517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2518 = ORIENTED_EDGE('',*,*,#2519,.F.);+#2519 = EDGE_CURVE('',#2520,#2498,#2522,.T.);+#2520 = VERTEX_POINT('',#2521);+#2521 = CARTESIAN_POINT('',(-0.708243103516,-1.309121551758,1.2));+#2522 = SURFACE_CURVE('',#2523,(#2527,#2534),.PCURVE_S1.);+#2523 = LINE('',#2524,#2525);+#2524 = CARTESIAN_POINT('',(-0.708243103516,-1.309121551758,1.2));+#2525 = VECTOR('',#2526,1.);+#2526 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2527 = PCURVE('',#2438,#2528);+#2528 = DEFINITIONAL_REPRESENTATION('',(#2529),#2533);+#2529 = LINE('',#2530,#2531);+#2530 = CARTESIAN_POINT('',(2.37828461896,-1.20872221882));+#2531 = VECTOR('',#2532,1.);+#2532 = DIRECTION('',(-0.899663384723,0.43658423493));+#2533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2534 = PCURVE('',#2303,#2535);+#2535 = DEFINITIONAL_REPRESENTATION('',(#2536),#2539);+#2536 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2537,#2538),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,2.618243103516),.PIECEWISE_BEZIER_KNOTS.);+#2537 = CARTESIAN_POINT('',(2.203190106279E-16,1.));+#2538 = CARTESIAN_POINT('',(2.685,1.));+#2539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2540 = ORIENTED_EDGE('',*,*,#2541,.F.);+#2541 = EDGE_CURVE('',#2542,#2520,#2544,.T.);+#2542 = VERTEX_POINT('',#2543);+#2543 = CARTESIAN_POINT('',(-0.659121551758,-1.358243103516,1.2));+#2544 = SURFACE_CURVE('',#2545,(#2549,#2556),.PCURVE_S1.);+#2545 = LINE('',#2546,#2547);+#2546 = CARTESIAN_POINT('',(-0.659121551758,-1.358243103516,1.2));+#2547 = VECTOR('',#2548,1.);+#2548 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2549 = PCURVE('',#2438,#2550);+#2550 = DEFINITIONAL_REPRESENTATION('',(#2551),#2555);+#2551 = LINE('',#2552,#2553);+#2552 = CARTESIAN_POINT('',(2.44392317557,-1.185975052396));+#2553 = VECTOR('',#2554,1.);+#2554 = DIRECTION('',(-0.944869753201,-0.327446407044));+#2555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2556 = PCURVE('',#2331,#2557);+#2557 = DEFINITIONAL_REPRESENTATION('',(#2558),#2561);+#2558 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2559,#2560),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,6.946836470098E-02),.PIECEWISE_BEZIER_KNOTS.);+#2559 = CARTESIAN_POINT('',(-8.609848061908E-17,1.));+#2560 = CARTESIAN_POINT('',(0.116672618896,1.));+#2561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2562 = ORIENTED_EDGE('',*,*,#2563,.F.);+#2563 = EDGE_CURVE('',#2402,#2542,#2564,.T.);+#2564 = SURFACE_CURVE('',#2565,(#2569,#2576),.PCURVE_S1.);+#2565 = LINE('',#2566,#2567);+#2566 = CARTESIAN_POINT('',(0.659121551758,-1.358243103516,1.2));+#2567 = VECTOR('',#2568,1.);+#2568 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2569 = PCURVE('',#2438,#2570);+#2570 = DEFINITIONAL_REPRESENTATION('',(#2571),#2575);+#2571 = LINE('',#2572,#2573);+#2572 = CARTESIAN_POINT('',(3.019447332371,6.75237643577E-13));+#2573 = VECTOR('',#2574,1.);+#2574 = DIRECTION('',(-0.43658423493,-0.899663384723));+#2575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2576 = PCURVE('',#2359,#2577);+#2577 = DEFINITIONAL_REPRESENTATION('',(#2578),#2581);+#2578 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2579,#2580),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.318243103516),.PIECEWISE_BEZIER_KNOTS.);+#2579 = CARTESIAN_POINT('',(4.940449035909E-17,1.));+#2580 = CARTESIAN_POINT('',(1.385,1.));+#2581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2582 = ORIENTED_EDGE('',*,*,#2423,.F.);+#2583 = ORIENTED_EDGE('',*,*,#2584,.F.);+#2584 = EDGE_CURVE('',#2585,#2424,#2587,.T.);+#2585 = VERTEX_POINT('',#2586);+#2586 = CARTESIAN_POINT('',(0.708243103516,1.309121551758,1.2));+#2587 = SURFACE_CURVE('',#2588,(#2592,#2599),.PCURVE_S1.);+#2588 = LINE('',#2589,#2590);+#2589 = CARTESIAN_POINT('',(0.708243103516,1.309121551758,1.2));+#2590 = VECTOR('',#2591,1.);+#2591 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2592 = PCURVE('',#2438,#2593);+#2593 = DEFINITIONAL_REPRESENTATION('',(#2594),#2598);+#2594 = LINE('',#2595,#2596);+#2595 = CARTESIAN_POINT('',(0.641162713411,1.208722218821));+#2596 = VECTOR('',#2597,1.);+#2597 = DIRECTION('',(0.899663384723,-0.43658423493));+#2598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2599 = PCURVE('',#2191,#2600);+#2600 = DEFINITIONAL_REPRESENTATION('',(#2601),#2604);+#2601 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2602,#2603),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,2.618243103516),.PIECEWISE_BEZIER_KNOTS.);+#2602 = CARTESIAN_POINT('',(2.203190106279E-16,1.));+#2603 = CARTESIAN_POINT('',(2.685,1.));+#2604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2605 = ORIENTED_EDGE('',*,*,#2606,.F.);+#2606 = EDGE_CURVE('',#2476,#2585,#2607,.T.);+#2607 = SURFACE_CURVE('',#2608,(#2612,#2619),.PCURVE_S1.);+#2608 = LINE('',#2609,#2610);+#2609 = CARTESIAN_POINT('',(0.659121551758,1.358243103516,1.2));+#2610 = VECTOR('',#2611,1.);+#2611 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2612 = PCURVE('',#2438,#2613);+#2613 = DEFINITIONAL_REPRESENTATION('',(#2614),#2618);+#2614 = LINE('',#2615,#2616);+#2615 = CARTESIAN_POINT('',(0.575524156801,1.185975052396));+#2616 = VECTOR('',#2617,1.);+#2617 = DIRECTION('',(0.944869753201,0.327446407044));+#2618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2619 = PCURVE('',#2219,#2620);+#2620 = DEFINITIONAL_REPRESENTATION('',(#2621),#2624);+#2621 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2622,#2623),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,6.946836470098E-02),.PIECEWISE_BEZIER_KNOTS.);+#2622 = CARTESIAN_POINT('',(-8.609848061908E-17,1.));+#2623 = CARTESIAN_POINT('',(0.116672618896,1.));+#2624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2625 = FACE_BOUND('',#2626,.T.);+#2626 = EDGE_LOOP('',(#2627,#2656,#2683,#2710,#2737,#2764,#2791,#2818));+#2627 = ORIENTED_EDGE('',*,*,#2628,.T.);+#2628 = EDGE_CURVE('',#2629,#2631,#2633,.T.);+#2629 = VERTEX_POINT('',#2630);+#2630 = CARTESIAN_POINT('',(-0.349971689823,4.86600130325E-02,1.2));+#2631 = VERTEX_POINT('',#2632);+#2632 = CARTESIAN_POINT('',(-0.3871403317,4.86600130325E-02,1.2));+#2633 = SURFACE_CURVE('',#2634,(#2638,#2645),.PCURVE_S1.);+#2634 = LINE('',#2635,#2636);+#2635 = CARTESIAN_POINT('',(-0.504546620791,4.86600130325E-02,1.2));+#2636 = VECTOR('',#2637,1.);+#2637 = DIRECTION('',(-1.,0.,0.));+#2638 = PCURVE('',#2438,#2639);+#2639 = DEFINITIONAL_REPRESENTATION('',(#2640),#2644);+#2640 = LINE('',#2641,#2642);+#2641 = CARTESIAN_POINT('',(1.245668933736,-0.432677926049));+#2642 = VECTOR('',#2643,1.);+#2643 = DIRECTION('',(-0.43658423493,-0.899663384723));+#2644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2645 = PCURVE('',#2646,#2651);+#2646 = PLANE('',#2647);+#2647 = AXIS2_PLACEMENT_3D('',#2648,#2649,#2650);+#2648 = CARTESIAN_POINT('',(-0.349971689823,4.86600130325E-02,1.2500001)+ );+#2649 = DIRECTION('',(0.,1.,0.));+#2650 = DIRECTION('',(-1.,0.,0.));+#2651 = DEFINITIONAL_REPRESENTATION('',(#2652),#2655);+#2652 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2653,#2654),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.154574930967,-0.117406289091),.PIECEWISE_BEZIER_KNOTS.);+#2653 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2654 = CARTESIAN_POINT('',(3.716864187662E-02,-5.00001E-02));+#2655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2656 = ORIENTED_EDGE('',*,*,#2657,.T.);+#2657 = EDGE_CURVE('',#2631,#2658,#2660,.T.);+#2658 = VERTEX_POINT('',#2659);+#2659 = CARTESIAN_POINT('',(-0.3871403317,6.213265507733E-02,1.2));+#2660 = SURFACE_CURVE('',#2661,(#2665,#2672),.PCURVE_S1.);+#2661 = LINE('',#2662,#2663);+#2662 = CARTESIAN_POINT('',(-0.3871403317,0.703451558274,1.2));+#2663 = VECTOR('',#2664,1.);+#2664 = DIRECTION('',(0.,1.,0.));+#2665 = PCURVE('',#2438,#2666);+#2666 = DEFINITIONAL_REPRESENTATION('',(#2667),#2671);+#2667 = LINE('',#2668,#2669);+#2668 = CARTESIAN_POINT('',(0.707834690754,-4.118012079978E-02));+#2669 = VECTOR('',#2670,1.);+#2670 = DIRECTION('',(-0.899663384723,0.43658423493));+#2671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2672 = PCURVE('',#2673,#2678);+#2673 = PLANE('',#2674);+#2674 = AXIS2_PLACEMENT_3D('',#2675,#2676,#2677);+#2675 = CARTESIAN_POINT('',(-0.3871403317,4.86600130325E-02,1.2500001));+#2676 = DIRECTION('',(1.,0.,0.));+#2677 = DIRECTION('',(0.,1.,0.));+#2678 = DEFINITIONAL_REPRESENTATION('',(#2679),#2682);+#2679 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2680,#2681),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.654791545242,-0.641318903197),.PIECEWISE_BEZIER_KNOTS.);+#2680 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2681 = CARTESIAN_POINT('',(1.347264204483E-02,-5.00001E-02));+#2682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2683 = ORIENTED_EDGE('',*,*,#2684,.T.);+#2684 = EDGE_CURVE('',#2658,#2685,#2687,.T.);+#2685 = VERTEX_POINT('',#2686);+#2686 = CARTESIAN_POINT('',(-0.29687363,6.213265507733E-02,1.2));+#2687 = SURFACE_CURVE('',#2688,(#2692,#2699),.PCURVE_S1.);+#2688 = LINE('',#2689,#2690);+#2689 = CARTESIAN_POINT('',(-0.523130941729,6.213265507733E-02,1.2));+#2690 = VECTOR('',#2691,1.);+#2691 = DIRECTION('',(1.,0.,-0.));+#2692 = PCURVE('',#2438,#2693);+#2693 = DEFINITIONAL_REPRESENTATION('',(#2694),#2698);+#2694 = LINE('',#2695,#2696);+#2695 = CARTESIAN_POINT('',(1.225434469454,-0.443515616008));+#2696 = VECTOR('',#2697,1.);+#2697 = DIRECTION('',(0.43658423493,0.899663384723));+#2698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2699 = PCURVE('',#2700,#2705);+#2700 = PLANE('',#2701);+#2701 = AXIS2_PLACEMENT_3D('',#2702,#2703,#2704);+#2702 = CARTESIAN_POINT('',(-0.3871403317,6.213265507733E-02,1.2500001)+ );+#2703 = DIRECTION('',(0.,-1.,0.));+#2704 = DIRECTION('',(1.,0.,0.));+#2705 = DEFINITIONAL_REPRESENTATION('',(#2706),#2709);+#2706 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2707,#2708),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.135990610029,0.226257311729),.PIECEWISE_BEZIER_KNOTS.);+#2707 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2708 = CARTESIAN_POINT('',(9.026670170036E-02,-5.00001E-02));+#2709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2710 = ORIENTED_EDGE('',*,*,#2711,.T.);+#2711 = EDGE_CURVE('',#2685,#2712,#2714,.T.);+#2712 = VERTEX_POINT('',#2713);+#2713 = CARTESIAN_POINT('',(-0.29687363,4.86600130325E-02,1.2));+#2714 = SURFACE_CURVE('',#2715,(#2719,#2726),.PCURVE_S1.);+#2715 = LINE('',#2716,#2717);+#2716 = CARTESIAN_POINT('',(-0.29687363,0.710187879297,1.2));+#2717 = VECTOR('',#2718,1.);+#2718 = DIRECTION('',(0.,-1.,0.));+#2719 = PCURVE('',#2438,#2720);+#2720 = DEFINITIONAL_REPRESENTATION('',(#2721),#2725);+#2721 = LINE('',#2722,#2723);+#2722 = CARTESIAN_POINT('',(0.741183288284,4.297049713951E-02));+#2723 = VECTOR('',#2724,1.);+#2724 = DIRECTION('',(0.899663384723,-0.43658423493));+#2725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2726 = PCURVE('',#2727,#2732);+#2727 = PLANE('',#2728);+#2728 = AXIS2_PLACEMENT_3D('',#2729,#2730,#2731);+#2729 = CARTESIAN_POINT('',(-0.29687363,6.213265507733E-02,1.2500001));+#2730 = DIRECTION('',(-1.,0.,0.));+#2731 = DIRECTION('',(0.,-1.,0.));+#2732 = DEFINITIONAL_REPRESENTATION('',(#2733),#2736);+#2733 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2734,#2735),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.648055224219,0.661527866264),.PIECEWISE_BEZIER_KNOTS.);+#2734 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2735 = CARTESIAN_POINT('',(1.347264204483E-02,-5.00001E-02));+#2736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2737 = ORIENTED_EDGE('',*,*,#2738,.T.);+#2738 = EDGE_CURVE('',#2712,#2739,#2741,.T.);+#2739 = VERTEX_POINT('',#2740);+#2740 = CARTESIAN_POINT('',(-0.333883770205,4.86600130325E-02,1.2));+#2741 = SURFACE_CURVE('',#2742,(#2746,#2753),.PCURVE_S1.);+#2742 = LINE('',#2743,#2744);+#2743 = CARTESIAN_POINT('',(-0.477997590879,4.86600130325E-02,1.2));+#2744 = VECTOR('',#2745,1.);+#2745 = DIRECTION('',(-1.,0.,0.));+#2746 = PCURVE('',#2438,#2747);+#2747 = DEFINITIONAL_REPRESENTATION('',(#2748),#2752);+#2748 = LINE('',#2749,#2750);+#2749 = CARTESIAN_POINT('',(1.257259821648,-0.408792735937));+#2750 = VECTOR('',#2751,1.);+#2751 = DIRECTION('',(-0.43658423493,-0.899663384723));+#2752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2753 = PCURVE('',#2754,#2759);+#2754 = PLANE('',#2755);+#2755 = AXIS2_PLACEMENT_3D('',#2756,#2757,#2758);+#2756 = CARTESIAN_POINT('',(-0.29687363,4.86600130325E-02,1.2500001));+#2757 = DIRECTION('',(0.,1.,0.));+#2758 = DIRECTION('',(-1.,0.,0.));+#2759 = DEFINITIONAL_REPRESENTATION('',(#2760),#2763);+#2760 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2761,#2762),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.181123960879,-0.144113820674),.PIECEWISE_BEZIER_KNOTS.);+#2761 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2762 = CARTESIAN_POINT('',(3.70101402055E-02,-5.00001E-02));+#2763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2764 = ORIENTED_EDGE('',*,*,#2765,.T.);+#2765 = EDGE_CURVE('',#2739,#2766,#2768,.T.);+#2766 = VERTEX_POINT('',#2767);+#2767 = CARTESIAN_POINT('',(-0.333883770205,-5.618884241049E-02,1.2));+#2768 = SURFACE_CURVE('',#2769,(#2773,#2780),.PCURVE_S1.);+#2769 = LINE('',#2770,#2771);+#2770 = CARTESIAN_POINT('',(-0.333883770205,0.703451558274,1.2));+#2771 = VECTOR('',#2772,1.);+#2772 = DIRECTION('',(0.,-1.,0.));+#2773 = PCURVE('',#2438,#2774);+#2774 = DEFINITIONAL_REPRESENTATION('',(#2775),#2779);+#2775 = LINE('',#2776,#2777);+#2776 = CARTESIAN_POINT('',(0.73108566591,6.73285757336E-03));+#2777 = VECTOR('',#2778,1.);+#2778 = DIRECTION('',(0.899663384723,-0.43658423493));+#2779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2780 = PCURVE('',#2781,#2786);+#2781 = PLANE('',#2782);+#2782 = AXIS2_PLACEMENT_3D('',#2783,#2784,#2785);+#2783 = CARTESIAN_POINT('',(-0.333883770205,4.86600130325E-02,1.2500001)+ );+#2784 = DIRECTION('',(-1.,0.,0.));+#2785 = DIRECTION('',(0.,-1.,0.));+#2786 = DEFINITIONAL_REPRESENTATION('',(#2787),#2790);+#2787 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2788,#2789),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.654791545242,0.759640400685),.PIECEWISE_BEZIER_KNOTS.);+#2788 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2789 = CARTESIAN_POINT('',(0.104848855443,-5.00001E-02));+#2790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2791 = ORIENTED_EDGE('',*,*,#2792,.T.);+#2792 = EDGE_CURVE('',#2766,#2793,#2795,.T.);+#2793 = VERTEX_POINT('',#2794);+#2794 = CARTESIAN_POINT('',(-0.349971689823,-5.618884241049E-02,1.2));+#2795 = SURFACE_CURVE('',#2796,(#2800,#2807),.PCURVE_S1.);+#2796 = LINE('',#2797,#2798);+#2797 = CARTESIAN_POINT('',(-0.496502660982,-5.618884241049E-02,1.2));+#2798 = VECTOR('',#2799,1.);+#2799 = DIRECTION('',(-1.,0.,0.));+#2800 = PCURVE('',#2438,#2801);+#2801 = DEFINITIONAL_REPRESENTATION('',(#2802),#2806);+#2802 = LINE('',#2803,#2804);+#2803 = CARTESIAN_POINT('',(1.343509475947,-0.471216427277));+#2804 = VECTOR('',#2805,1.);+#2805 = DIRECTION('',(-0.43658423493,-0.899663384723));+#2806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2807 = PCURVE('',#2808,#2813);+#2808 = PLANE('',#2809);+#2809 = AXIS2_PLACEMENT_3D('',#2810,#2811,#2812);+#2810 = CARTESIAN_POINT('',(-0.333883770205,-5.618884241049E-02,+ 1.2500001));+#2811 = DIRECTION('',(0.,1.,0.));+#2812 = DIRECTION('',(-1.,0.,0.));+#2813 = DEFINITIONAL_REPRESENTATION('',(#2814),#2817);+#2814 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2815,#2816),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.162618890776,-0.146530971158),.PIECEWISE_BEZIER_KNOTS.);+#2815 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2816 = CARTESIAN_POINT('',(1.608791961824E-02,-5.00001E-02));+#2817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2818 = ORIENTED_EDGE('',*,*,#2819,.T.);+#2819 = EDGE_CURVE('',#2793,#2629,#2820,.T.);+#2820 = SURFACE_CURVE('',#2821,(#2825,#2832),.PCURVE_S1.);+#2821 = LINE('',#2822,#2823);+#2822 = CARTESIAN_POINT('',(-0.349971689823,0.651027130553,1.2));+#2823 = VECTOR('',#2824,1.);+#2824 = DIRECTION('',(0.,1.,0.));+#2825 = PCURVE('',#2438,#2826);+#2826 = DEFINITIONAL_REPRESENTATION('',(#2827),#2831);+#2827 = LINE('',#2828,#2829);+#2828 = CARTESIAN_POINT('',(0.771226271917,-3.062853331197E-02));+#2829 = VECTOR('',#2830,1.);+#2830 = DIRECTION('',(-0.899663384723,0.43658423493));+#2831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2832 = PCURVE('',#2833,#2838);+#2833 = PLANE('',#2834);+#2834 = AXIS2_PLACEMENT_3D('',#2835,#2836,#2837);+#2835 = CARTESIAN_POINT('',(-0.349971689823,-5.618884241049E-02,+ 1.2500001));+#2836 = DIRECTION('',(1.,0.,0.));+#2837 = DIRECTION('',(0.,1.,0.));+#2838 = DEFINITIONAL_REPRESENTATION('',(#2839),#2842);+#2839 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2840,#2841),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707215972963,-0.60236711752),.PIECEWISE_BEZIER_KNOTS.);+#2840 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2841 = CARTESIAN_POINT('',(0.104848855443,-5.00001E-02));+#2842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2843 = FACE_BOUND('',#2844,.T.);+#2844 = EDGE_LOOP('',(#2845,#2874,#2901,#2928,#2955,#2982,#3009,#3036,+ #3063,#3090,#3117,#3144));+#2845 = ORIENTED_EDGE('',*,*,#2846,.T.);+#2846 = EDGE_CURVE('',#2847,#2849,#2851,.T.);+#2847 = VERTEX_POINT('',#2848);+#2848 = CARTESIAN_POINT('',(-0.266203556639,-5.618884241049E-02,1.2));+#2849 = VERTEX_POINT('',#2850);+#2850 = CARTESIAN_POINT('',(-0.282291476257,-5.618884241049E-02,1.2));+#2851 = SURFACE_CURVE('',#2852,(#2856,#2863),.PCURVE_S1.);+#2852 = LINE('',#2853,#2854);+#2853 = CARTESIAN_POINT('',(-0.462662554198,-5.618884241049E-02,1.2));+#2854 = VECTOR('',#2855,1.);+#2855 = DIRECTION('',(-1.,0.,0.));+#2856 = PCURVE('',#2438,#2857);+#2857 = DEFINITIONAL_REPRESENTATION('',(#2858),#2862);+#2858 = LINE('',#2859,#2860);+#2859 = CARTESIAN_POINT('',(1.358283533077,-0.44077172227));+#2860 = VECTOR('',#2861,1.);+#2861 = DIRECTION('',(-0.43658423493,-0.899663384723));+#2862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2863 = PCURVE('',#2864,#2869);+#2864 = PLANE('',#2865);+#2865 = AXIS2_PLACEMENT_3D('',#2866,#2867,#2868);+#2866 = CARTESIAN_POINT('',(-0.266203556639,-5.618884241049E-02,+ 1.2500001));+#2867 = DIRECTION('',(0.,1.,0.));+#2868 = DIRECTION('',(-1.,0.,0.));+#2869 = DEFINITIONAL_REPRESENTATION('',(#2870),#2873);+#2870 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2871,#2872),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.19645899756,-0.180371077941),.PIECEWISE_BEZIER_KNOTS.);+#2871 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2872 = CARTESIAN_POINT('',(1.608791961824E-02,-5.00001E-02));+#2873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2874 = ORIENTED_EDGE('',*,*,#2875,.T.);+#2875 = EDGE_CURVE('',#2849,#2876,#2878,.T.);+#2876 = VERTEX_POINT('',#2877);+#2877 = CARTESIAN_POINT('',(-0.282291476257,6.213265507733E-02,1.2));+#2878 = SURFACE_CURVE('',#2879,(#2883,#2890),.PCURVE_S1.);+#2879 = LINE('',#2880,#2881);+#2880 = CARTESIAN_POINT('',(-0.282291476257,0.651027130553,1.2));+#2881 = VECTOR('',#2882,1.);+#2882 = DIRECTION('',(0.,1.,0.));+#2883 = PCURVE('',#2438,#2884);+#2884 = DEFINITIONAL_REPRESENTATION('',(#2885),#2889);+#2885 = LINE('',#2886,#2887);+#2886 = CARTESIAN_POINT('',(0.800774386177,3.02608767039E-02));+#2887 = VECTOR('',#2888,1.);+#2888 = DIRECTION('',(-0.899663384723,0.43658423493));+#2889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2890 = PCURVE('',#2891,#2896);+#2891 = PLANE('',#2892);+#2892 = AXIS2_PLACEMENT_3D('',#2893,#2894,#2895);+#2893 = CARTESIAN_POINT('',(-0.282291476257,-5.618884241049E-02,+ 1.2500001));+#2894 = DIRECTION('',(1.,0.,0.));+#2895 = DIRECTION('',(0.,1.,0.));+#2896 = DEFINITIONAL_REPRESENTATION('',(#2897),#2900);+#2897 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2898,#2899),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707215972963,-0.588894475475),.PIECEWISE_BEZIER_KNOTS.);+#2898 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2899 = CARTESIAN_POINT('',(0.118321497488,-5.00001E-02));+#2900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2901 = ORIENTED_EDGE('',*,*,#2902,.T.);+#2902 = EDGE_CURVE('',#2876,#2903,#2905,.T.);+#2903 = VERTEX_POINT('',#2904);+#2904 = CARTESIAN_POINT('',(-0.266203556639,6.213265507733E-02,1.2));+#2905 = SURFACE_CURVE('',#2906,(#2910,#2917),.PCURVE_S1.);+#2906 = LINE('',#2907,#2908);+#2907 = CARTESIAN_POINT('',(-0.470706514007,6.213265507733E-02,1.2));+#2908 = VECTOR('',#2909,1.);+#2909 = DIRECTION('',(1.,0.,-0.));+#2910 = PCURVE('',#2438,#2911);+#2911 = DEFINITIONAL_REPRESENTATION('',(#2912),#2916);+#2912 = LINE('',#2913,#2914);+#2913 = CARTESIAN_POINT('',(1.248322148122,-0.396351277921));+#2914 = VECTOR('',#2915,1.);+#2915 = DIRECTION('',(0.43658423493,0.899663384723));+#2916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2917 = PCURVE('',#2918,#2923);+#2918 = PLANE('',#2919);+#2919 = AXIS2_PLACEMENT_3D('',#2920,#2921,#2922);+#2920 = CARTESIAN_POINT('',(-0.282291476257,6.213265507733E-02,1.2500001+ ));+#2921 = DIRECTION('',(0.,-1.,0.));+#2922 = DIRECTION('',(1.,0.,0.));+#2923 = DEFINITIONAL_REPRESENTATION('',(#2924),#2927);+#2924 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2925,#2926),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.188415037751,0.204502957369),.PIECEWISE_BEZIER_KNOTS.);+#2925 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2926 = CARTESIAN_POINT('',(1.608791961824E-02,-5.00001E-02));+#2927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2928 = ORIENTED_EDGE('',*,*,#2929,.T.);+#2929 = EDGE_CURVE('',#2903,#2930,#2932,.T.);+#2930 = VERTEX_POINT('',#2931);+#2931 = CARTESIAN_POINT('',(-0.266203556639,1.363114371595E-02,1.2));+#2932 = SURFACE_CURVE('',#2933,(#2937,#2944),.PCURVE_S1.);+#2933 = LINE('',#2934,#2935);+#2934 = CARTESIAN_POINT('',(-0.266203556639,0.710187879297,1.2));+#2935 = VECTOR('',#2936,1.);+#2936 = DIRECTION('',(0.,-1.,0.));+#2937 = PCURVE('',#2438,#2938);+#2938 = DEFINITIONAL_REPRESENTATION('',(#2939),#2943);+#2939 = LINE('',#2940,#2941);+#2940 = CARTESIAN_POINT('',(0.754573358798,7.056323914905E-02));+#2941 = VECTOR('',#2942,1.);+#2942 = DIRECTION('',(0.899663384723,-0.43658423493));+#2943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2944 = PCURVE('',#2945,#2950);+#2945 = PLANE('',#2946);+#2946 = AXIS2_PLACEMENT_3D('',#2947,#2948,#2949);+#2947 = CARTESIAN_POINT('',(-0.266203556639,6.213265507733E-02,1.2500001+ ));+#2948 = DIRECTION('',(-1.,0.,0.));+#2949 = DIRECTION('',(0.,-1.,0.));+#2950 = DEFINITIONAL_REPRESENTATION('',(#2951),#2954);+#2951 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2952,#2953),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.648055224219,0.696556735581),.PIECEWISE_BEZIER_KNOTS.);+#2952 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2953 = CARTESIAN_POINT('',(4.850151136139E-02,-5.00001E-02));+#2954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2955 = ORIENTED_EDGE('',*,*,#2956,.T.);+#2956 = EDGE_CURVE('',#2930,#2957,#2959,.T.);+#2957 = VERTEX_POINT('',#2958);+#2958 = CARTESIAN_POINT('',(-0.222377844575,1.363114371595E-02,1.2));+#2959 = SURFACE_CURVE('',#2960,(#2964,#2971),.PCURVE_S1.);+#2960 = LINE('',#2961,#2962);+#2961 = CARTESIAN_POINT('',(-0.462662554198,1.363114371595E-02,1.2));+#2962 = VECTOR('',#2963,1.);+#2963 = DIRECTION('',(1.,0.,-0.));+#2964 = PCURVE('',#2438,#2965);+#2965 = DEFINITIONAL_REPRESENTATION('',(#2966),#2970);+#2966 = LINE('',#2967,#2968);+#2967 = CARTESIAN_POINT('',(1.295469048037,-0.410289417044));+#2968 = VECTOR('',#2969,1.);+#2969 = DIRECTION('',(0.43658423493,0.899663384723));+#2970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2971 = PCURVE('',#2972,#2977);+#2972 = PLANE('',#2973);+#2973 = AXIS2_PLACEMENT_3D('',#2974,#2975,#2976);+#2974 = CARTESIAN_POINT('',(-0.266203556639,1.363114371595E-02,1.2500001+ ));+#2975 = DIRECTION('',(0.,-1.,0.));+#2976 = DIRECTION('',(1.,0.,0.));+#2977 = DEFINITIONAL_REPRESENTATION('',(#2978),#2981);+#2978 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2979,#2980),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.19645899756,0.240284709623),.PIECEWISE_BEZIER_KNOTS.);+#2979 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2980 = CARTESIAN_POINT('',(4.382571206347E-02,-5.00001E-02));+#2981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2982 = ORIENTED_EDGE('',*,*,#2983,.T.);+#2983 = EDGE_CURVE('',#2957,#2984,#2986,.T.);+#2984 = VERTEX_POINT('',#2985);+#2985 = CARTESIAN_POINT('',(-0.222377844575,6.213265507733E-02,1.2));+#2986 = SURFACE_CURVE('',#2987,(#2991,#2998),.PCURVE_S1.);+#2987 = LINE('',#2988,#2989);+#2988 = CARTESIAN_POINT('',(-0.222377844575,0.685937123616,1.2));+#2989 = VECTOR('',#2990,1.);+#2990 = DIRECTION('',(0.,1.,0.));+#2991 = PCURVE('',#2438,#2992);+#2992 = DEFINITIONAL_REPRESENTATION('',(#2993),#2997);+#2993 = LINE('',#2994,#2995);+#2994 = CARTESIAN_POINT('',(0.795524490707,9.940412998661E-02));+#2995 = VECTOR('',#2996,1.);+#2996 = DIRECTION('',(-0.899663384723,0.43658423493));+#2997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2998 = PCURVE('',#2999,#3004);+#2999 = PLANE('',#3000);+#3000 = AXIS2_PLACEMENT_3D('',#3001,#3002,#3003);+#3001 = CARTESIAN_POINT('',(-0.222377844575,1.363114371595E-02,1.2500001+ ));+#3002 = DIRECTION('',(1.,0.,0.));+#3003 = DIRECTION('',(0.,1.,0.));+#3004 = DEFINITIONAL_REPRESENTATION('',(#3005),#3008);+#3005 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3006,#3007),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.6723059799,-0.623804468539),.PIECEWISE_BEZIER_KNOTS.);+#3006 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3007 = CARTESIAN_POINT('',(4.850151136139E-02,-5.00001E-02));+#3008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3009 = ORIENTED_EDGE('',*,*,#3010,.T.);+#3010 = EDGE_CURVE('',#2984,#3011,#3013,.T.);+#3011 = VERTEX_POINT('',#3012);+#3012 = CARTESIAN_POINT('',(-0.206289924957,6.213265507733E-02,1.2));+#3013 = SURFACE_CURVE('',#3014,(#3018,#3025),.PCURVE_S1.);+#3014 = LINE('',#3015,#3016);+#3015 = CARTESIAN_POINT('',(-0.440749698167,6.213265507733E-02,1.2));+#3016 = VECTOR('',#3017,1.);+#3017 = DIRECTION('',(1.,0.,-0.));+#3018 = PCURVE('',#2438,#3019);+#3019 = DEFINITIONAL_REPRESENTATION('',(#3020),#3024);+#3020 = LINE('',#3021,#3022);+#3021 = CARTESIAN_POINT('',(1.261400821647,-0.369400227587));+#3022 = VECTOR('',#3023,1.);+#3023 = DIRECTION('',(0.43658423493,0.899663384723));+#3024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3025 = PCURVE('',#3026,#3031);+#3026 = PLANE('',#3027);+#3027 = AXIS2_PLACEMENT_3D('',#3028,#3029,#3030);+#3028 = CARTESIAN_POINT('',(-0.222377844575,6.213265507733E-02,1.2500001+ ));+#3029 = DIRECTION('',(0.,-1.,0.));+#3030 = DIRECTION('',(1.,0.,0.));+#3031 = DEFINITIONAL_REPRESENTATION('',(#3032),#3035);+#3032 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3033,#3034),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.218371853591,0.23445977321),.PIECEWISE_BEZIER_KNOTS.);+#3033 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3034 = CARTESIAN_POINT('',(1.608791961824E-02,-5.00001E-02));+#3035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3036 = ORIENTED_EDGE('',*,*,#3037,.T.);+#3037 = EDGE_CURVE('',#3011,#3038,#3040,.T.);+#3038 = VERTEX_POINT('',#3039);+#3039 = CARTESIAN_POINT('',(-0.206289924957,-5.618884241049E-02,1.2));+#3040 = SURFACE_CURVE('',#3041,(#3045,#3052),.PCURVE_S1.);+#3041 = LINE('',#3042,#3043);+#3042 = CARTESIAN_POINT('',(-0.206289924957,0.710187879297,1.2));+#3043 = VECTOR('',#3044,1.);+#3044 = DIRECTION('',(0.,-1.,0.));+#3045 = PCURVE('',#2438,#3046);+#3046 = DEFINITIONAL_REPRESENTATION('',(#3047),#3051);+#3047 = LINE('',#3048,#3049);+#3048 = CARTESIAN_POINT('',(0.780730705847,0.124465339819));+#3049 = VECTOR('',#3050,1.);+#3050 = DIRECTION('',(0.899663384723,-0.43658423493));+#3051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3052 = PCURVE('',#3053,#3058);+#3053 = PLANE('',#3054);+#3054 = AXIS2_PLACEMENT_3D('',#3055,#3056,#3057);+#3055 = CARTESIAN_POINT('',(-0.206289924957,6.213265507733E-02,1.2500001+ ));+#3056 = DIRECTION('',(-1.,0.,0.));+#3057 = DIRECTION('',(0.,-1.,0.));+#3058 = DEFINITIONAL_REPRESENTATION('',(#3059),#3062);+#3059 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3060,#3061),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.648055224219,0.766376721707),.PIECEWISE_BEZIER_KNOTS.);+#3060 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3061 = CARTESIAN_POINT('',(0.118321497488,-5.00001E-02));+#3062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3063 = ORIENTED_EDGE('',*,*,#3064,.T.);+#3064 = EDGE_CURVE('',#3038,#3065,#3067,.T.);+#3065 = VERTEX_POINT('',#3066);+#3066 = CARTESIAN_POINT('',(-0.222377844575,-5.618884241049E-02,1.2));+#3067 = SURFACE_CURVE('',#3068,(#3072,#3079),.PCURVE_S1.);+#3068 = LINE('',#3069,#3070);+#3069 = CARTESIAN_POINT('',(-0.432705738358,-5.618884241049E-02,1.2));+#3070 = VECTOR('',#3071,1.);+#3071 = DIRECTION('',(-1.,0.,0.));+#3072 = PCURVE('',#2438,#3073);+#3073 = DEFINITIONAL_REPRESENTATION('',(#3074),#3078);+#3074 = LINE('',#3075,#3076);+#3075 = CARTESIAN_POINT('',(1.371362206601,-0.413820671935));+#3076 = VECTOR('',#3077,1.);+#3077 = DIRECTION('',(-0.43658423493,-0.899663384723));+#3078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3079 = PCURVE('',#3080,#3085);+#3080 = PLANE('',#3081);+#3081 = AXIS2_PLACEMENT_3D('',#3082,#3083,#3084);+#3082 = CARTESIAN_POINT('',(-0.206289924957,-5.618884241049E-02,+ 1.2500001));+#3083 = DIRECTION('',(0.,1.,0.));+#3084 = DIRECTION('',(-1.,0.,0.));+#3085 = DEFINITIONAL_REPRESENTATION('',(#3086),#3089);+#3086 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3087,#3088),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.2264158134,-0.210327893782),.PIECEWISE_BEZIER_KNOTS.);+#3087 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3088 = CARTESIAN_POINT('',(1.608791961824E-02,-5.00001E-02));+#3089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3090 = ORIENTED_EDGE('',*,*,#3091,.T.);+#3091 = EDGE_CURVE('',#3065,#3092,#3094,.T.);+#3092 = VERTEX_POINT('',#3093);+#3093 = CARTESIAN_POINT('',(-0.222377844575,1.585016711156E-04,1.2));+#3094 = SURFACE_CURVE('',#3095,(#3099,#3106),.PCURVE_S1.);+#3095 = LINE('',#3096,#3097);+#3096 = CARTESIAN_POINT('',(-0.222377844575,0.651027130553,1.2));+#3097 = VECTOR('',#3098,1.);+#3098 = DIRECTION('',(0.,1.,0.));+#3099 = PCURVE('',#2438,#3100);+#3100 = DEFINITIONAL_REPRESENTATION('',(#3101),#3105);+#3101 = LINE('',#3102,#3103);+#3102 = CARTESIAN_POINT('',(0.826931733227,8.416297737368E-02));+#3103 = VECTOR('',#3104,1.);+#3104 = DIRECTION('',(-0.899663384723,0.43658423493));+#3105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3106 = PCURVE('',#3107,#3112);+#3107 = PLANE('',#3108);+#3108 = AXIS2_PLACEMENT_3D('',#3109,#3110,#3111);+#3109 = CARTESIAN_POINT('',(-0.222377844575,-5.618884241049E-02,+ 1.2500001));+#3110 = DIRECTION('',(1.,0.,0.));+#3111 = DIRECTION('',(0.,1.,0.));+#3112 = DEFINITIONAL_REPRESENTATION('',(#3113),#3116);+#3113 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3114,#3115),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707215972963,-0.650868628882),.PIECEWISE_BEZIER_KNOTS.);+#3114 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3115 = CARTESIAN_POINT('',(5.634734408161E-02,-5.00001E-02));+#3116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3117 = ORIENTED_EDGE('',*,*,#3118,.T.);+#3118 = EDGE_CURVE('',#3092,#3119,#3121,.T.);+#3119 = VERTEX_POINT('',#3120);+#3120 = CARTESIAN_POINT('',(-0.266203556639,1.585016711156E-04,1.2));+#3121 = SURFACE_CURVE('',#3122,(#3126,#3133),.PCURVE_S1.);+#3122 = LINE('',#3123,#3124);+#3123 = CARTESIAN_POINT('',(-0.440749698167,1.585016711156E-04,1.2));+#3124 = VECTOR('',#3125,1.);+#3125 = DIRECTION('',(-1.,0.,0.));+#3126 = PCURVE('',#2438,#3127);+#3127 = DEFINITIONAL_REPRESENTATION('',(#3128),#3132);+#3128 = LINE('',#3129,#3130);+#3129 = CARTESIAN_POINT('',(1.317156698266,-0.396457165937));+#3130 = VECTOR('',#3131,1.);+#3131 = DIRECTION('',(-0.43658423493,-0.899663384723));+#3132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3133 = PCURVE('',#3134,#3139);+#3134 = PLANE('',#3135);+#3135 = AXIS2_PLACEMENT_3D('',#3136,#3137,#3138);+#3136 = CARTESIAN_POINT('',(-0.222377844575,1.585016711156E-04,1.2500001+ ));+#3137 = DIRECTION('',(0.,1.,0.));+#3138 = DIRECTION('',(-1.,0.,0.));+#3139 = DEFINITIONAL_REPRESENTATION('',(#3140),#3143);+#3140 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3141,#3142),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.218371853591,-0.174546141528),.PIECEWISE_BEZIER_KNOTS.);+#3141 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3142 = CARTESIAN_POINT('',(4.382571206347E-02,-5.00001E-02));+#3143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3144 = ORIENTED_EDGE('',*,*,#3145,.T.);+#3145 = EDGE_CURVE('',#3119,#2847,#3146,.T.);+#3146 = SURFACE_CURVE('',#3147,(#3151,#3158),.PCURVE_S1.);+#3147 = LINE('',#3148,#3149);+#3148 = CARTESIAN_POINT('',(-0.266203556639,0.679200802594,1.2));+#3149 = VECTOR('',#3150,1.);+#3150 = DIRECTION('',(0.,-1.,0.));+#3151 = PCURVE('',#2438,#3152);+#3152 = DEFINITIONAL_REPRESENTATION('',(#3153),#3157);+#3153 = LINE('',#3154,#3155);+#3154 = CARTESIAN_POINT('',(0.782451297107,5.70347699739E-02));+#3155 = VECTOR('',#3156,1.);+#3156 = DIRECTION('',(0.899663384723,-0.43658423493));+#3157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3158 = PCURVE('',#3159,#3164);+#3159 = PLANE('',#3160);+#3160 = AXIS2_PLACEMENT_3D('',#3161,#3162,#3163);+#3161 = CARTESIAN_POINT('',(-0.266203556639,1.585016711156E-04,1.2500001+ ));+#3162 = DIRECTION('',(-1.,0.,0.));+#3163 = DIRECTION('',(0.,-1.,0.));+#3164 = DEFINITIONAL_REPRESENTATION('',(#3165),#3168);+#3165 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3166,#3167),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.679042300922,0.735389645004),.PIECEWISE_BEZIER_KNOTS.);+#3166 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3167 = CARTESIAN_POINT('',(5.634734408161E-02,-5.00001E-02));+#3168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3169 = FACE_BOUND('',#3170,.T.);+#3170 = EDGE_LOOP('',(#3171,#3200,#3227,#3254,#3281,#3308,#3335));+#3171 = ORIENTED_EDGE('',*,*,#3172,.T.);+#3172 = EDGE_CURVE('',#3173,#3175,#3177,.T.);+#3173 = VERTEX_POINT('',#3174);+#3174 = CARTESIAN_POINT('',(-0.190915262859,6.213265507733E-02,1.2));+#3175 = VERTEX_POINT('',#3176);+#3176 = CARTESIAN_POINT('',(-0.174351838227,6.213265507733E-02,1.2));+#3177 = SURFACE_CURVE('',#3178,(#3182,#3189),.PCURVE_S1.);+#3178 = LINE('',#3179,#3180);+#3179 = CARTESIAN_POINT('',(-0.425018407308,6.213265507733E-02,1.2));+#3180 = VECTOR('',#3181,1.);+#3181 = DIRECTION('',(1.,0.,-0.));+#3182 = PCURVE('',#2438,#3183);+#3183 = DEFINITIONAL_REPRESENTATION('',(#3184),#3188);+#3184 = LINE('',#3185,#3186);+#3185 = CARTESIAN_POINT('',(1.268268855231,-0.355247361207));+#3186 = VECTOR('',#3187,1.);+#3187 = DIRECTION('',(0.43658423493,0.899663384723));+#3188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3189 = PCURVE('',#3190,#3195);+#3190 = PLANE('',#3191);+#3191 = AXIS2_PLACEMENT_3D('',#3192,#3193,#3194);+#3192 = CARTESIAN_POINT('',(-0.190915262859,6.213265507733E-02,1.2500001+ ));+#3193 = DIRECTION('',(0.,-1.,0.));+#3194 = DIRECTION('',(1.,0.,0.));+#3195 = DEFINITIONAL_REPRESENTATION('',(#3196),#3199);+#3196 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3197,#3198),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.23410314445,0.250666569081),.PIECEWISE_BEZIER_KNOTS.);+#3197 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3198 = CARTESIAN_POINT('',(1.656342463158E-02,-5.00001E-02));+#3199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3200 = ORIENTED_EDGE('',*,*,#3201,.T.);+#3201 = EDGE_CURVE('',#3175,#3202,#3204,.T.);+#3202 = VERTEX_POINT('',#3203);+#3203 = CARTESIAN_POINT('',(-0.146614045782,-4.271620036567E-02,1.2));+#3204 = SURFACE_CURVE('',#3205,(#3209,#3216),.PCURVE_S1.);+#3205 = LINE('',#3206,#3207);+#3206 = CARTESIAN_POINT('',(-0.350435248153,0.727727944598,1.2));+#3207 = VECTOR('',#3208,1.);+#3208 = DIRECTION('',(0.255751966392,-0.966742432961,0.));+#3209 = PCURVE('',#2438,#3210);+#3210 = DEFINITIONAL_REPRESENTATION('',(#3211),#3215);+#3211 = LINE('',#3212,#3213);+#3212 = CARTESIAN_POINT('',(0.702018975684,2.440786450351E-03));+#3213 = VECTOR('',#3214,1.);+#3214 = DIRECTION('',(0.981400045971,-0.191973825735));+#3215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3216 = PCURVE('',#3217,#3222);+#3217 = PLANE('',#3218);+#3218 = AXIS2_PLACEMENT_3D('',#3219,#3220,#3221);+#3219 = CARTESIAN_POINT('',(-0.174351838227,6.213265507733E-02,1.2500001+ ));+#3220 = DIRECTION('',(-0.966742432961,-0.255751966392,0.));+#3221 = DIRECTION('',(0.255751966392,-0.966742432961,0.));+#3222 = DEFINITIONAL_REPRESENTATION('',(#3223),#3226);+#3223 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3224,#3225),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.688492887896,0.796948720461),.PIECEWISE_BEZIER_KNOTS.);+#3224 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3225 = CARTESIAN_POINT('',(0.108455832565,-5.00001E-02));+#3226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3227 = ORIENTED_EDGE('',*,*,#3228,.T.);+#3228 = EDGE_CURVE('',#3202,#3229,#3231,.T.);+#3229 = VERTEX_POINT('',#3230);+#3230 = CARTESIAN_POINT('',(-0.118797002501,6.213265507733E-02,1.2));+#3231 = SURFACE_CURVE('',#3232,(#3236,#3243),.PCURVE_S1.);+#3232 = LINE('',#3233,#3234);+#3233 = CARTESIAN_POINT('',(1.015585851038E-02,0.548185746582,1.2));+#3234 = VECTOR('',#3235,1.);+#3235 = DIRECTION('',(0.256434699025,0.966561557862,-0.));+#3236 = PCURVE('',#2438,#3237);+#3237 = DEFINITIONAL_REPRESENTATION('',(#3238),#3242);+#3238 = LINE('',#3239,#3240);+#3239 = CARTESIAN_POINT('',(1.020974909676,0.248466108814));+#3240 = VECTOR('',#3241,1.);+#3241 = DIRECTION('',(-0.757624695805,0.652690447537));+#3242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3243 = PCURVE('',#3244,#3249);+#3244 = PLANE('',#3245);+#3245 = AXIS2_PLACEMENT_3D('',#3246,#3247,#3248);+#3246 = CARTESIAN_POINT('',(-0.146614045782,-4.271620036567E-02,+ 1.2500001));+#3247 = DIRECTION('',(0.966561557862,-0.256434699025,0.));+#3248 = DIRECTION('',(0.256434699025,0.966561557862,0.));+#3249 = DEFINITIONAL_REPRESENTATION('',(#3250),#3253);+#3250 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3251,#3252),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.611344349609,-0.502868221431),.PIECEWISE_BEZIER_KNOTS.);+#3251 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3252 = CARTESIAN_POINT('',(0.108476128178,-5.00001E-02));+#3253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3254 = ORIENTED_EDGE('',*,*,#3255,.T.);+#3255 = EDGE_CURVE('',#3229,#3256,#3258,.T.);+#3256 = VERTEX_POINT('',#3257);+#3257 = CARTESIAN_POINT('',(-0.10223357787,6.213265507733E-02,1.2));+#3258 = SURFACE_CURVE('',#3259,(#3263,#3270),.PCURVE_S1.);+#3259 = LINE('',#3260,#3261);+#3260 = CARTESIAN_POINT('',(-0.38895927713,6.213265507733E-02,1.2));+#3261 = VECTOR('',#3262,1.);+#3262 = DIRECTION('',(1.,0.,-0.));+#3263 = PCURVE('',#2438,#3264);+#3264 = DEFINITIONAL_REPRESENTATION('',(#3265),#3269);+#3265 = LINE('',#3266,#3267);+#3266 = CARTESIAN_POINT('',(1.284011702992,-0.3228062821));+#3267 = VECTOR('',#3268,1.);+#3268 = DIRECTION('',(0.43658423493,0.899663384723));+#3269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3270 = PCURVE('',#3271,#3276);+#3271 = PLANE('',#3272);+#3272 = AXIS2_PLACEMENT_3D('',#3273,#3274,#3275);+#3273 = CARTESIAN_POINT('',(-0.118797002501,6.213265507733E-02,1.2500001+ ));+#3274 = DIRECTION('',(0.,-1.,0.));+#3275 = DIRECTION('',(1.,0.,0.));+#3276 = DEFINITIONAL_REPRESENTATION('',(#3277),#3280);+#3277 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3278,#3279),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.270162274628,0.28672569926),.PIECEWISE_BEZIER_KNOTS.);+#3278 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3279 = CARTESIAN_POINT('',(1.656342463158E-02,-5.00001E-02));+#3280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3281 = ORIENTED_EDGE('',*,*,#3282,.T.);+#3282 = EDGE_CURVE('',#3256,#3283,#3285,.T.);+#3283 = VERTEX_POINT('',#3284);+#3284 = CARTESIAN_POINT('',(-0.136866193008,-5.618884241049E-02,1.2));+#3285 = SURFACE_CURVE('',#3286,(#3290,#3297),.PCURVE_S1.);+#3286 = LINE('',#3287,#3288);+#3287 = CARTESIAN_POINT('',(5.05105871747E-02,0.583979424897,1.2));+#3288 = VECTOR('',#3289,1.);+#3289 = DIRECTION('',(-0.280913194718,-0.959733180125,0.));+#3290 = PCURVE('',#2438,#3291);+#3291 = DEFINITIONAL_REPRESENTATION('',(#3292),#3296);+#3292 = LINE('',#3293,#3294);+#3293 = CARTESIAN_POINT('',(1.006390886232,0.300398736256));+#3294 = VECTOR('',#3295,1.);+#3295 = DIRECTION('',(0.740794529064,-0.671731691756));+#3296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3297 = PCURVE('',#3298,#3303);+#3298 = PLANE('',#3299);+#3299 = AXIS2_PLACEMENT_3D('',#3300,#3301,#3302);+#3300 = CARTESIAN_POINT('',(-0.10223357787,6.213265507733E-02,1.2500001)+ );+#3301 = DIRECTION('',(-0.959733180125,0.280913194718,0.));+#3302 = DIRECTION('',(-0.280913194718,-0.959733180125,0.));+#3303 = DEFINITIONAL_REPRESENTATION('',(#3304),#3307);+#3304 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3305,#3306),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.543741511314,0.667027336935),.PIECEWISE_BEZIER_KNOTS.);+#3305 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3306 = CARTESIAN_POINT('',(0.123285825621,-5.00001E-02));+#3307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3308 = ORIENTED_EDGE('',*,*,#3309,.T.);+#3309 = EDGE_CURVE('',#3283,#3310,#3312,.T.);+#3310 = VERTEX_POINT('',#3311);+#3311 = CARTESIAN_POINT('',(-0.15628264772,-5.618884241049E-02,1.2));+#3312 = SURFACE_CURVE('',#3313,(#3317,#3324),.PCURVE_S1.);+#3313 = LINE('',#3314,#3315);+#3314 = CARTESIAN_POINT('',(-0.397993872383,-5.618884241049E-02,1.2));+#3315 = VECTOR('',#3316,1.);+#3316 = DIRECTION('',(-1.,0.,0.));+#3317 = PCURVE('',#2438,#3318);+#3318 = DEFINITIONAL_REPRESENTATION('',(#3319),#3323);+#3319 = LINE('',#3320,#3321);+#3320 = CARTESIAN_POINT('',(1.386516860051,-0.382591677102));+#3321 = VECTOR('',#3322,1.);+#3322 = DIRECTION('',(-0.43658423493,-0.899663384723));+#3323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3324 = PCURVE('',#3325,#3330);+#3325 = PLANE('',#3326);+#3326 = AXIS2_PLACEMENT_3D('',#3327,#3328,#3329);+#3327 = CARTESIAN_POINT('',(-0.136866193008,-5.618884241049E-02,+ 1.2500001));+#3328 = DIRECTION('',(0.,1.,0.));+#3329 = DIRECTION('',(-1.,0.,0.));+#3330 = DEFINITIONAL_REPRESENTATION('',(#3331),#3334);+#3331 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3332,#3333),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.261127679375,-0.241711224663),.PIECEWISE_BEZIER_KNOTS.);+#3332 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3333 = CARTESIAN_POINT('',(1.941645471167E-02,-5.00001E-02));+#3334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3335 = ORIENTED_EDGE('',*,*,#3336,.T.);+#3336 = EDGE_CURVE('',#3310,#3173,#3337,.T.);+#3337 = SURFACE_CURVE('',#3338,(#3342,#3349),.PCURVE_S1.);+#3338 = LINE('',#3339,#3340);+#3339 = CARTESIAN_POINT('',(-0.366789353847,0.663002261132,1.2));+#3340 = VECTOR('',#3341,1.);+#3341 = DIRECTION('',(-0.280913194718,0.959733180125,0.));+#3342 = PCURVE('',#2438,#3343);+#3343 = DEFINITIONAL_REPRESENTATION('',(#3344),#3348);+#3344 = LINE('',#3345,#3346);+#3345 = CARTESIAN_POINT('',(0.753110358427,-4.053061662881E-02));+#3346 = VECTOR('',#3347,1.);+#3347 = DIRECTION('',(-0.98607907346,0.166277060608));+#3348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3349 = PCURVE('',#3350,#3355);+#3350 = PLANE('',#3351);+#3351 = AXIS2_PLACEMENT_3D('',#3352,#3353,#3354);+#3352 = CARTESIAN_POINT('',(-0.15628264772,-5.618884241049E-02,1.2500001+ ));+#3353 = DIRECTION('',(0.959733180125,0.280913194718,0.));+#3354 = DIRECTION('',(-0.280913194718,0.959733180125,0.));+#3355 = DEFINITIONAL_REPRESENTATION('',(#3356),#3359);+#3356 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3357,#3358),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.749365676248,-0.626079850627),.PIECEWISE_BEZIER_KNOTS.);+#3357 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3358 = CARTESIAN_POINT('',(0.123285825621,-5.00001E-02));+#3359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3360 = FACE_BOUND('',#3361,.T.);+#3361 = EDGE_LOOP('',(#3362,#3391,#3418,#3454,#3490,#3526,#3562));+#3362 = ORIENTED_EDGE('',*,*,#3363,.T.);+#3363 = EDGE_CURVE('',#3364,#3366,#3368,.T.);+#3364 = VERTEX_POINT('',#3365);+#3365 = CARTESIAN_POINT('',(-8.685891577137E-02,-5.618884241049E-02,1.2)+ );+#3366 = VERTEX_POINT('',#3367);+#3367 = CARTESIAN_POINT('',(-8.685891577137E-02,6.213265507733E-02,1.2)+ );+#3368 = SURFACE_CURVE('',#3369,(#3373,#3380),.PCURVE_S1.);+#3369 = LINE('',#3370,#3371);+#3370 = CARTESIAN_POINT('',(-8.685891577137E-02,0.651027130553,1.2));+#3371 = VECTOR('',#3372,1.);+#3372 = DIRECTION('',(0.,1.,0.));+#3373 = PCURVE('',#2438,#3374);+#3374 = DEFINITIONAL_REPRESENTATION('',(#3375),#3379);+#3375 = LINE('',#3376,#3377);+#3376 = CARTESIAN_POINT('',(0.886097161077,0.206084395555));+#3377 = VECTOR('',#3378,1.);+#3378 = DIRECTION('',(-0.899663384723,0.43658423493));+#3379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3380 = PCURVE('',#3381,#3386);+#3381 = PLANE('',#3382);+#3382 = AXIS2_PLACEMENT_3D('',#3383,#3384,#3385);+#3383 = CARTESIAN_POINT('',(-8.685891577137E-02,-5.618884241049E-02,+ 1.2500001));+#3384 = DIRECTION('',(1.,0.,0.));+#3385 = DIRECTION('',(0.,1.,0.));+#3386 = DEFINITIONAL_REPRESENTATION('',(#3387),#3390);+#3387 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3388,#3389),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707215972963,-0.588894475475),.PIECEWISE_BEZIER_KNOTS.);+#3388 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3389 = CARTESIAN_POINT('',(0.118321497488,-5.00001E-02));+#3390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3391 = ORIENTED_EDGE('',*,*,#3392,.T.);+#3392 = EDGE_CURVE('',#3366,#3393,#3395,.T.);+#3393 = VERTEX_POINT('',#3394);+#3394 = CARTESIAN_POINT('',(-6.284591259735E-02,6.213265507733E-02,1.2)+ );+#3395 = SURFACE_CURVE('',#3396,(#3400,#3407),.PCURVE_S1.);+#3396 = LINE('',#3397,#3398);+#3397 = CARTESIAN_POINT('',(-0.372990233765,6.213265507733E-02,1.2));+#3398 = VECTOR('',#3399,1.);+#3399 = DIRECTION('',(1.,0.,-0.));+#3400 = PCURVE('',#2438,#3401);+#3401 = DEFINITIONAL_REPRESENTATION('',(#3402),#3406);+#3402 = LINE('',#3403,#3404);+#3403 = CARTESIAN_POINT('',(1.290983535572,-0.308439518496));+#3404 = VECTOR('',#3405,1.);+#3405 = DIRECTION('',(0.43658423493,0.899663384723));+#3406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3407 = PCURVE('',#3408,#3413);+#3408 = PLANE('',#3409);+#3409 = AXIS2_PLACEMENT_3D('',#3410,#3411,#3412);+#3410 = CARTESIAN_POINT('',(-8.685891577137E-02,6.213265507733E-02,+ 1.2500001));+#3411 = DIRECTION('',(0.,-1.,0.));+#3412 = DIRECTION('',(1.,0.,0.));+#3413 = DEFINITIONAL_REPRESENTATION('',(#3414),#3417);+#3414 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3415,#3416),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.286131317993,0.310144321167),.PIECEWISE_BEZIER_KNOTS.);+#3415 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3416 = CARTESIAN_POINT('',(2.401300317402E-02,-5.00001E-02));+#3417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3418 = ORIENTED_EDGE('',*,*,#3419,.F.);+#3419 = EDGE_CURVE('',#3420,#3393,#3422,.T.);+#3420 = VERTEX_POINT('',#3421);+#3421 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,1.2)+ );+#3422 = SURFACE_CURVE('',#3423,(#3429,#3438),.PCURVE_S1.);+#3423 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3424,#3425,#3426,#3427,#3428),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3424 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,1.2)+ );+#3425 = CARTESIAN_POINT('',(-2.932424809462E-02,5.492244562649E-02,1.2)+ );+#3426 = CARTESIAN_POINT('',(-3.812381123202E-02,5.973110685774E-02,1.2)+ );+#3427 = CARTESIAN_POINT('',(-4.930076357305E-02,6.213265507733E-02,1.2)+ );+#3428 = CARTESIAN_POINT('',(-6.284591259735E-02,6.213265507733E-02,1.2)+ );+#3429 = PCURVE('',#2438,#3430);+#3430 = DEFINITIONAL_REPRESENTATION('',(#3431),#3437);+#3431 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3432,#3433,#3434,#3435,#3436),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3432 = CARTESIAN_POINT('',(1.456802319756,2.23565913463E-04));+#3433 = CARTESIAN_POINT('',(1.447509448437,-2.40367839057E-03));+#3434 = CARTESIAN_POINT('',(1.439341521457,-8.220937462163E-03));+#3435 = CARTESIAN_POINT('',(1.432301255271,-1.722795414407E-02));+#3436 = CARTESIAN_POINT('',(1.426387656747,-2.941402876185E-02));+#3437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3438 = PCURVE('',#3439,#3446);+#3439 = SURFACE_OF_LINEAR_EXTRUSION('',#3440,#3444);+#3440 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3441,#3442,#3443),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3441 = CARTESIAN_POINT('',(-6.284591259735E-02,6.213265507733E-02,+ 1.2500001));+#3442 = CARTESIAN_POINT('',(-3.574212683658E-02,6.213265507733E-02,+ 1.2500001));+#3443 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,+ 1.2500001));+#3444 = VECTOR('',#3445,1.);+#3445 = DIRECTION('',(0.,0.,1.));+#3446 = DEFINITIONAL_REPRESENTATION('',(#3447),#3453);+#3447 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3448,#3449,#3450,#3451,#3452),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3448 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3449 = CARTESIAN_POINT('',(0.749943960624,-5.00001E-02));+#3450 = CARTESIAN_POINT('',(0.499879595867,-5.00001E-02));+#3451 = CARTESIAN_POINT('',(0.24987559199,-5.00001E-02));+#3452 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3454 = ORIENTED_EDGE('',*,*,#3455,.F.);+#3455 = EDGE_CURVE('',#3456,#3420,#3458,.T.);+#3456 = VERTEX_POINT('',#3457);+#3457 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,1.2)+ );+#3458 = SURFACE_CURVE('',#3459,(#3465,#3474),.PCURVE_S1.);+#3459 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3460,#3461,#3462,#3463,#3464),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3460 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,1.2)+ );+#3461 = CARTESIAN_POINT('',(-1.006485611584E-02,1.805867035329E-02,1.2)+ );+#3462 = CARTESIAN_POINT('',(-1.220166837508E-02,3.06097267085E-02,1.2));+#3463 = CARTESIAN_POINT('',(-1.648152835207E-02,4.049420492807E-02,1.2)+ );+#3464 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,1.2)+ );+#3465 = PCURVE('',#2438,#3466);+#3466 = DEFINITIONAL_REPRESENTATION('',(#3467),#3473);+#3467 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3468,#3469,#3470,#3471,#3472),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3468 = CARTESIAN_POINT('',(1.50276274198,-7.809394564842E-03));+#3469 = CARTESIAN_POINT('',(1.489082784185,-1.17085173954E-03));+#3470 = CARTESIAN_POINT('',(1.476858159797,2.386329847205E-03));+#3471 = CARTESIAN_POINT('',(1.466096937272,2.851303895345E-03));+#3472 = CARTESIAN_POINT('',(1.456802319756,2.23565913463E-04));+#3473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3474 = PCURVE('',#3475,#3482);+#3475 = SURFACE_OF_LINEAR_EXTRUSION('',#3476,#3480);+#3476 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3477,#3478,#3479),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3477 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,+ 1.2500001));+#3478 = CARTESIAN_POINT('',(-1.006485611584E-02,3.328535093428E-02,+ 1.2500001));+#3479 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,+ 1.2500001));+#3480 = VECTOR('',#3481,1.);+#3481 = DIRECTION('',(0.,0.,1.));+#3482 = DEFINITIONAL_REPRESENTATION('',(#3483),#3489);+#3483 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3484,#3485,#3486,#3487,#3488),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3484 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3485 = CARTESIAN_POINT('',(0.750172845081,-5.00001E-02));+#3486 = CARTESIAN_POINT('',(0.500184080625,-5.00001E-02));+#3487 = CARTESIAN_POINT('',(0.25010302668,-5.00001E-02));+#3488 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3490 = ORIENTED_EDGE('',*,*,#3491,.F.);+#3491 = EDGE_CURVE('',#3492,#3456,#3494,.T.);+#3492 = VERTEX_POINT('',#3493);+#3493 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,1.2)+ );+#3494 = SURFACE_CURVE('',#3495,(#3501,#3510),.PCURVE_S1.);+#3495 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3496,#3497,#3498,#3499,#3500),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3496 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,1.2)+ );+#3497 = CARTESIAN_POINT('',(-1.648157456361E-02,-3.460989032689E-02,1.2)+ );+#3498 = CARTESIAN_POINT('',(-1.220170988069E-02,-2.476512784645E-02,1.2)+ );+#3499 = CARTESIAN_POINT('',(-1.006485611584E-02,-1.227356083994E-02,1.2)+ );+#3500 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,1.2)+ );+#3501 = PCURVE('',#2438,#3502);+#3502 = DEFINITIONAL_REPRESENTATION('',(#3503),#3509);+#3503 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3504,#3505,#3506,#3507,#3508),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3504 = CARTESIAN_POINT('',(1.537334624924,-3.885675616667E-02));+#3505 = CARTESIAN_POINT('',(1.533665321641,-2.99380016465E-02));+#3506 = CARTESIAN_POINT('',(1.526676870754,-2.178949600412E-02));+#3507 = CARTESIAN_POINT('',(1.516371581966,-1.441342568876E-02));+#3508 = CARTESIAN_POINT('',(1.50276274198,-7.809394564842E-03));+#3509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3510 = PCURVE('',#3511,#3518);+#3511 = SURFACE_OF_LINEAR_EXTRUSION('',#3512,#3516);+#3512 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3513,#3514,#3515),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3513 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,+ 1.2500001));+#3514 = CARTESIAN_POINT('',(-1.006485611584E-02,-2.742078910301E-02,+ 1.2500001));+#3515 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,+ 1.2500001));+#3516 = VECTOR('',#3517,1.);+#3517 = DIRECTION('',(0.,0.,1.));+#3518 = DEFINITIONAL_REPRESENTATION('',(#3519),#3525);+#3519 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3520,#3521,#3522,#3523,#3524),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3520 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3521 = CARTESIAN_POINT('',(0.749898773026,-5.00001E-02));+#3522 = CARTESIAN_POINT('',(0.49981873841,-5.00001E-02));+#3523 = CARTESIAN_POINT('',(0.249829577638,-5.00001E-02));+#3524 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3526 = ORIENTED_EDGE('',*,*,#3527,.F.);+#3527 = EDGE_CURVE('',#3528,#3492,#3530,.T.);+#3528 = VERTEX_POINT('',#3529);+#3529 = CARTESIAN_POINT('',(-6.284591259735E-02,-5.618884241049E-02,1.2)+ );+#3530 = SURFACE_CURVE('',#3531,(#3537,#3546),.PCURVE_S1.);+#3531 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3532,#3533,#3534,#3535,#3536),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3532 = CARTESIAN_POINT('',(-6.284591259735E-02,-5.618884241049E-02,1.2)+ );+#3533 = CARTESIAN_POINT('',(-4.930077386081E-02,-5.618884241049E-02,1.2)+ );+#3534 = CARTESIAN_POINT('',(-3.812382821928E-02,-5.379389549024E-02,1.2)+ );+#3535 = CARTESIAN_POINT('',(-2.932425785471E-02,-4.899845216229E-02,1.2)+ );+#3536 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,1.2)+ );+#3537 = PCURVE('',#2438,#3538);+#3538 = DEFINITIONAL_REPRESENTATION('',(#3539),#3545);+#3539 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3540,#3541,#3542,#3543,#3544),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3540 = CARTESIAN_POINT('',(1.532837175662,-8.107132921837E-02));+#3541 = CARTESIAN_POINT('',(1.538750769695,-6.888526385612E-02));+#3542 = CARTESIAN_POINT('',(1.541475801904,-5.778417904053E-02));+#3543 = CARTESIAN_POINT('',(1.541003270824,-4.777391282574E-02));+#3544 = CARTESIAN_POINT('',(1.537334624924,-3.885675616667E-02));+#3545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3546 = PCURVE('',#3547,#3554);+#3547 = SURFACE_OF_LINEAR_EXTRUSION('',#3548,#3552);+#3548 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3549,#3550,#3551),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3549 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,+ 1.2500001));+#3550 = CARTESIAN_POINT('',(-3.574212683658E-02,-5.618884241049E-02,+ 1.2500001));+#3551 = CARTESIAN_POINT('',(-6.284591259735E-02,-5.618884241049E-02,+ 1.2500001));+#3552 = VECTOR('',#3553,1.);+#3553 = DIRECTION('',(0.,0.,1.));+#3554 = DEFINITIONAL_REPRESENTATION('',(#3555),#3561);+#3555 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3556,#3557,#3558,#3559,#3560),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3556 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3557 = CARTESIAN_POINT('',(0.750124597794,-5.00001E-02));+#3558 = CARTESIAN_POINT('',(0.50012078409,-5.00001E-02));+#3559 = CARTESIAN_POINT('',(0.250056419482,-5.00001E-02));+#3560 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3562 = ORIENTED_EDGE('',*,*,#3563,.T.);+#3563 = EDGE_CURVE('',#3528,#3364,#3564,.T.);+#3564 = SURFACE_CURVE('',#3565,(#3569,#3576),.PCURVE_S1.);+#3565 = LINE('',#3566,#3567);+#3566 = CARTESIAN_POINT('',(-0.360983732178,-5.618884241049E-02,1.2));+#3567 = VECTOR('',#3568,1.);+#3568 = DIRECTION('',(-1.,0.,0.));+#3569 = PCURVE('',#2438,#3570);+#3570 = DEFINITIONAL_REPRESENTATION('',(#3571),#3575);+#3571 = LINE('',#3572,#3573);+#3572 = CARTESIAN_POINT('',(1.402674903797,-0.349295009096));+#3573 = VECTOR('',#3574,1.);+#3574 = DIRECTION('',(-0.43658423493,-0.899663384723));+#3575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3576 = PCURVE('',#3577,#3582);+#3577 = PLANE('',#3578);+#3578 = AXIS2_PLACEMENT_3D('',#3579,#3580,#3581);+#3579 = CARTESIAN_POINT('',(-6.284591259735E-02,-5.618884241049E-02,+ 1.2500001));+#3580 = DIRECTION('',(0.,1.,0.));+#3581 = DIRECTION('',(-1.,0.,0.));+#3582 = DEFINITIONAL_REPRESENTATION('',(#3583),#3586);+#3583 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3584,#3585),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.29813781958,-0.274124816406),.PIECEWISE_BEZIER_KNOTS.);+#3584 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3585 = CARTESIAN_POINT('',(2.401300317402E-02,-5.00001E-02));+#3586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3587 = FACE_BOUND('',#3588,.T.);+#3588 = EDGE_LOOP('',(#3589,#3627,#3663,#3699,#3735,#3771,#3807,#3843,+ #3879,#3915,#3951,#3996,#4032,#4068,#4104,#4140));+#3589 = ORIENTED_EDGE('',*,*,#3590,.F.);+#3590 = EDGE_CURVE('',#3591,#3593,#3595,.T.);+#3591 = VERTEX_POINT('',#3592);+#3592 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,1.2));+#3593 = VERTEX_POINT('',#3594);+#3594 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,1.2));+#3595 = SURFACE_CURVE('',#3596,(#3602,#3611),.PCURVE_S1.);+#3596 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3597,#3598,#3599,#3600,#3601),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3597 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,1.2));+#3598 = CARTESIAN_POINT('',(2.177420723143E-02,1.283858550419E-02,1.2));+#3599 = CARTESIAN_POINT('',(2.539341461993E-02,1.002512117183E-02,1.2));+#3600 = CARTESIAN_POINT('',(2.975889801576E-02,7.964655440961E-03,1.2));+#3601 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,1.2));+#3602 = PCURVE('',#2438,#3603);+#3603 = DEFINITIONAL_REPRESENTATION('',(#3604),#3610);+#3604 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3605,#3606,#3607,#3608,#3609),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3605 = CARTESIAN_POINT('',(1.503216777869,2.416696011809E-02));+#3606 = CARTESIAN_POINT('',(1.507679536501,2.519458100775E-02));+#3607 = CARTESIAN_POINT('',(1.511790796234,2.722233520385E-02));+#3608 = CARTESIAN_POINT('',(1.515550423036,3.025023391699E-02));+#3609 = CARTESIAN_POINT('',(1.518958396669,3.427796487716E-02));+#3610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3611 = PCURVE('',#3612,#3619);+#3612 = SURFACE_OF_LINEAR_EXTRUSION('',#3613,#3617);+#3613 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3614,#3615,#3616),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3614 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,+ 1.2500001));+#3615 = CARTESIAN_POINT('',(2.464700985848E-02,9.272347760265E-03,+ 1.2500001));+#3616 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,+ 1.2500001));+#3617 = VECTOR('',#3618,1.);+#3618 = DIRECTION('',(0.,0.,1.));+#3619 = DEFINITIONAL_REPRESENTATION('',(#3620),#3626);+#3620 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3621,#3622,#3623,#3624,#3625),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3621 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3622 = CARTESIAN_POINT('',(0.749996505037,-5.00001E-02));+#3623 = CARTESIAN_POINT('',(0.499990846168,-5.00001E-02));+#3624 = CARTESIAN_POINT('',(0.249989765407,-5.00001E-02));+#3625 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3627 = ORIENTED_EDGE('',*,*,#3628,.F.);+#3628 = EDGE_CURVE('',#3629,#3591,#3631,.T.);+#3629 = VERTEX_POINT('',#3630);+#3630 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,1.2));+#3631 = SURFACE_CURVE('',#3632,(#3638,#3647),.PCURVE_S1.);+#3632 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3633,#3634,#3635,#3636,#3637),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3633 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,1.2));+#3634 = CARTESIAN_POINT('',(1.31556387026E-02,2.857008359953E-02,1.2));+#3635 = CARTESIAN_POINT('',(1.41131930679E-02,2.40262978935E-02,1.2));+#3636 = CARTESIAN_POINT('',(1.602847131314E-02,1.997122319587E-02,1.2));+#3637 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,1.2));+#3638 = PCURVE('',#2438,#3639);+#3639 = DEFINITIONAL_REPRESENTATION('',(#3640),#3646);+#3640 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3641,#3642,#3643,#3644,#3645),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3641 = CARTESIAN_POINT('',(1.48523640286,2.650590457737E-02));+#3642 = CARTESIAN_POINT('',(1.489763752531,2.43088945339E-02));+#3643 = CARTESIAN_POINT('',(1.494269683298,2.318662592909E-02));+#3644 = CARTESIAN_POINT('',(1.498754065813,2.313934995343E-02));+#3645 = CARTESIAN_POINT('',(1.503216777869,2.416696011809E-02));+#3646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3647 = PCURVE('',#3648,#3655);+#3648 = SURFACE_OF_LINEAR_EXTRUSION('',#3649,#3653);+#3649 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3650,#3651,#3652),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3650 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,+ 1.2500001));+#3651 = CARTESIAN_POINT('',(1.31556387026E-02,2.353749816067E-02,+ 1.2500001));+#3652 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,+ 1.2500001));+#3653 = VECTOR('',#3654,1.);+#3654 = DIRECTION('',(0.,0.,1.));+#3655 = DEFINITIONAL_REPRESENTATION('',(#3656),#3662);+#3656 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3657,#3658,#3659,#3660,#3661),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3657 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3658 = CARTESIAN_POINT('',(0.75000781834,-5.00001E-02));+#3659 = CARTESIAN_POINT('',(0.500005803132,-5.00001E-02));+#3660 = CARTESIAN_POINT('',(0.250000885746,-5.00001E-02));+#3661 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3663 = ORIENTED_EDGE('',*,*,#3664,.F.);+#3664 = EDGE_CURVE('',#3665,#3629,#3667,.T.);+#3665 = VERTEX_POINT('',#3666);+#3666 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,1.2));+#3667 = SURFACE_CURVE('',#3668,(#3674,#3683),.PCURVE_S1.);+#3668 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3669,#3670,#3671,#3672,#3673),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3669 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,1.2));+#3670 = CARTESIAN_POINT('',(1.795033106749E-02,5.184987368458E-02,1.2));+#3671 = CARTESIAN_POINT('',(1.475360699429E-02,4.673797485022E-02,1.2));+#3672 = CARTESIAN_POINT('',(1.31556387026E-02,4.065511184262E-02,1.2));+#3673 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,1.2));+#3674 = PCURVE('',#2438,#3675);+#3675 = DEFINITIONAL_REPRESENTATION('',(#3676),#3682);+#3676 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3677,#3678,#3679,#3680,#3681),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3677 = CARTESIAN_POINT('',(1.469280973699,4.490749812575E-02));+#3678 = CARTESIAN_POINT('',(1.470913064885,3.878609303922E-02));+#3679 = CARTESIAN_POINT('',(1.474116413759,3.367834299786E-02));+#3680 = CARTESIAN_POINT('',(1.478891295117,2.958502734352E-02));+#3681 = CARTESIAN_POINT('',(1.48523640286,2.650590457737E-02));+#3682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3683 = PCURVE('',#3684,#3691);+#3684 = SURFACE_OF_LINEAR_EXTRUSION('',#3685,#3689);+#3685 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3686,#3687,#3688),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3686 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,+ 1.2500001));+#3687 = CARTESIAN_POINT('',(1.31556387026E-02,4.770900300581E-02,+ 1.2500001));+#3688 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,+ 1.2500001));+#3689 = VECTOR('',#3690,1.);+#3690 = DIRECTION('',(0.,0.,1.));+#3691 = DEFINITIONAL_REPRESENTATION('',(#3692),#3698);+#3692 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3693,#3694,#3695,#3696,#3697),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3693 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3694 = CARTESIAN_POINT('',(0.750000876683,-5.00001E-02));+#3695 = CARTESIAN_POINT('',(0.499987188098,-5.00001E-02));+#3696 = CARTESIAN_POINT('',(0.249979910234,-5.00001E-02));+#3697 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3699 = ORIENTED_EDGE('',*,*,#3700,.F.);+#3700 = EDGE_CURVE('',#3701,#3665,#3703,.T.);+#3701 = VERTEX_POINT('',#3702);+#3702 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,1.2));+#3703 = SURFACE_CURVE('',#3704,(#3710,#3719),.PCURVE_S1.);+#3704 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3705,#3706,#3707,#3708,#3709),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3705 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,1.2));+#3706 = CARTESIAN_POINT('',(4.057766202645E-02,6.427242763739E-02,1.2));+#3707 = CARTESIAN_POINT('',(3.348435488617E-02,6.289255569681E-02,1.2));+#3708 = CARTESIAN_POINT('',(2.754001260465E-02,6.013187137576E-02,1.2));+#3709 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,1.2));+#3710 = PCURVE('',#2438,#3711);+#3711 = DEFINITIONAL_REPRESENTATION('',(#3712),#3718);+#3712 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3713,#3714,#3715,#3716,#3717),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3713 = CARTESIAN_POINT('',(1.473213510285,7.19805588229E-02));+#3714 = CARTESIAN_POINT('',(1.469615683924,6.456656541036E-02));+#3715 = CARTESIAN_POINT('',(1.467760278114,5.758254636418E-02));+#3716 = CARTESIAN_POINT('',(1.467648758587,5.102936801505E-02));+#3717 = CARTESIAN_POINT('',(1.469280973699,4.490749812575E-02));+#3718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3719 = PCURVE('',#3720,#3727);+#3720 = SURFACE_OF_LINEAR_EXTRUSION('',#3721,#3725);+#3721 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3722,#3723,#3724),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3722 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,+ 1.2500001));+#3723 = CARTESIAN_POINT('',(3.233434090759E-02,6.427242763739E-02,+ 1.2500001));+#3724 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,+ 1.2500001));+#3725 = VECTOR('',#3726,1.);+#3726 = DIRECTION('',(0.,0.,1.));+#3727 = DEFINITIONAL_REPRESENTATION('',(#3728),#3734);+#3728 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3729,#3730,#3731,#3732,#3733),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3729 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3730 = CARTESIAN_POINT('',(0.750037436539,-5.00001E-02));+#3731 = CARTESIAN_POINT('',(0.50003703768,-5.00001E-02));+#3732 = CARTESIAN_POINT('',(0.250018105934,-5.00001E-02));+#3733 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3735 = ORIENTED_EDGE('',*,*,#3736,.F.);+#3736 = EDGE_CURVE('',#3737,#3701,#3739,.T.);+#3737 = VERTEX_POINT('',#3738);+#3738 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,1.2));+#3739 = SURFACE_CURVE('',#3740,(#3746,#3755),.PCURVE_S1.);+#3740 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3741,#3742,#3743,#3744,#3745),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3741 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,1.2));+#3742 = CARTESIAN_POINT('',(7.017625684554E-02,6.013188069665E-02,1.2));+#3743 = CARTESIAN_POINT('',(6.421869300413E-02,6.289256392827E-02,1.2));+#3744 = CARTESIAN_POINT('',(5.709896217555E-02,6.427242763739E-02,1.2));+#3745 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,1.2));+#3746 = PCURVE('',#2438,#3747);+#3747 = DEFINITIONAL_REPRESENTATION('',(#3748),#3754);+#3748 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3749,#3750,#3751,#3752,#3753),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3749 = CARTESIAN_POINT('',(1.492082153204,9.189358852441E-02));+#3750 = CARTESIAN_POINT('',(1.486263062273,8.938763989001E-02));+#3751 = CARTESIAN_POINT('',(1.481178398201,8.523310861631E-02));+#3752 = CARTESIAN_POINT('',(1.47682862311,7.943017422252E-02));+#3753 = CARTESIAN_POINT('',(1.473213510285,7.19805588229E-02));+#3754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3755 = PCURVE('',#3756,#3763);+#3756 = SURFACE_OF_LINEAR_EXTRUSION('',#3757,#3761);+#3757 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3758,#3759,#3760),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3758 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,+ 1.2500001));+#3759 = CARTESIAN_POINT('',(6.53819393352E-02,6.427242763739E-02,+ 1.2500001));+#3760 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,+ 1.2500001));+#3761 = VECTOR('',#3762,1.);+#3762 = DIRECTION('',(0.,0.,1.));+#3763 = DEFINITIONAL_REPRESENTATION('',(#3764),#3770);+#3764 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3765,#3766,#3767,#3768,#3769),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3765 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3766 = CARTESIAN_POINT('',(0.749981331327,-5.00001E-02));+#3767 = CARTESIAN_POINT('',(0.49996208999,-5.00001E-02));+#3768 = CARTESIAN_POINT('',(0.249961818166,-5.00001E-02));+#3769 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3771 = ORIENTED_EDGE('',*,*,#3772,.F.);+#3772 = EDGE_CURVE('',#3773,#3737,#3775,.T.);+#3773 = VERTEX_POINT('',#3774);+#3774 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,1.2));+#3775 = SURFACE_CURVE('',#3776,(#3782,#3791),.PCURVE_S1.);+#3776 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3777,#3778,#3779,#3780,#3781),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3777 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,1.2));+#3778 = CARTESIAN_POINT('',(8.456064154019E-02,4.065511184312E-02,1.2));+#3779 = CARTESIAN_POINT('',(8.296267324866E-02,4.673797485003E-02,1.2));+#3780 = CARTESIAN_POINT('',(7.976594917479E-02,5.184987368502E-02,1.2));+#3781 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,1.2));+#3782 = PCURVE('',#2438,#3783);+#3783 = DEFINITIONAL_REPRESENTATION('',(#3784),#3790);+#3784 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3785,#3786,#3787,#3788,#3789),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3785 = CARTESIAN_POINT('',(1.516410701395,9.074637111636E-02));+#3786 = CARTESIAN_POINT('',(1.510065593651,9.382549388273E-02));+#3787 = CARTESIAN_POINT('',(1.503895416765,9.504354241295E-02));+#3788 = CARTESIAN_POINT('',(1.497900789223,9.439934125454E-02));+#3789 = CARTESIAN_POINT('',(1.492082153204,9.189358852441E-02));+#3790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3791 = PCURVE('',#3792,#3799);+#3792 = SURFACE_OF_LINEAR_EXTRUSION('',#3793,#3797);+#3793 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3794,#3795,#3796),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3794 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,+ 1.2500001));+#3795 = CARTESIAN_POINT('',(8.456064154019E-02,4.770900300581E-02,+ 1.2500001));+#3796 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,+ 1.2500001));+#3797 = VECTOR('',#3798,1.);+#3798 = DIRECTION('',(0.,0.,1.));+#3799 = DEFINITIONAL_REPRESENTATION('',(#3800),#3806);+#3800 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3801,#3802,#3803,#3804,#3805),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3801 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3802 = CARTESIAN_POINT('',(0.750020089748,-5.00001E-02));+#3803 = CARTESIAN_POINT('',(0.500012811912,-5.00001E-02));+#3804 = CARTESIAN_POINT('',(0.24999912329,-5.00001E-02));+#3805 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3807 = ORIENTED_EDGE('',*,*,#3808,.F.);+#3808 = EDGE_CURVE('',#3809,#3773,#3811,.T.);+#3809 = VERTEX_POINT('',#3810);+#3810 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,1.2));+#3811 = SURFACE_CURVE('',#3812,(#3818,#3827),.PCURVE_S1.);+#3812 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3813,#3814,#3815,#3816,#3817),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3813 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,1.2));+#3814 = CARTESIAN_POINT('',(8.16878089298E-02,1.997122319604E-02,1.2));+#3815 = CARTESIAN_POINT('',(8.360308717484E-02,2.402629789343E-02,1.2));+#3816 = CARTESIAN_POINT('',(8.456064154019E-02,2.857008359966E-02,1.2));+#3817 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,1.2));+#3818 = PCURVE('',#2438,#3819);+#3819 = DEFINITIONAL_REPRESENTATION('',(#3820),#3826);+#3820 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3821,#3822,#3823,#3824,#3825),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3821 = CARTESIAN_POINT('',(1.529374124919,7.806906078788E-02));+#3822 = CARTESIAN_POINT('',(1.527419897493,8.221065187235E-02));+#3823 = CARTESIAN_POINT('',(1.524607875552,8.570413926532E-02));+#3824 = CARTESIAN_POINT('',(1.520938051064,8.854936107295E-02));+#3825 = CARTESIAN_POINT('',(1.516410701395,9.074637111636E-02));+#3826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3827 = PCURVE('',#3828,#3835);+#3828 = SURFACE_OF_LINEAR_EXTRUSION('',#3829,#3833);+#3829 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3830,#3831,#3832),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3830 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,+ 1.2500001));+#3831 = CARTESIAN_POINT('',(8.456064154019E-02,2.353749816067E-02,+ 1.2500001));+#3832 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,+ 1.2500001));+#3833 = VECTOR('',#3834,1.);+#3834 = DIRECTION('',(0.,0.,1.));+#3835 = DEFINITIONAL_REPRESENTATION('',(#3836),#3842);+#3836 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3837,#3838,#3839,#3840,#3841),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3837 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3838 = CARTESIAN_POINT('',(0.749999114242,-5.00001E-02));+#3839 = CARTESIAN_POINT('',(0.499994196874,-5.00001E-02));+#3840 = CARTESIAN_POINT('',(0.249992181654,-5.00001E-02));+#3841 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3843 = ORIENTED_EDGE('',*,*,#3844,.F.);+#3844 = EDGE_CURVE('',#3845,#3809,#3847,.T.);+#3845 = VERTEX_POINT('',#3846);+#3846 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,1.2));+#3847 = SURFACE_CURVE('',#3848,(#3854,#3863),.PCURVE_S1.);+#3848 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3849,#3850,#3851,#3852,#3853),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3849 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,1.2));+#3850 = CARTESIAN_POINT('',(6.795738222734E-02,7.964655441039E-03,1.2));+#3851 = CARTESIAN_POINT('',(7.232286562271E-02,1.002512117175E-02,1.2));+#3852 = CARTESIAN_POINT('',(7.594207301152E-02,1.283858550438E-02,1.2));+#3853 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,1.2));+#3854 = PCURVE('',#2438,#3855);+#3855 = DEFINITIONAL_REPRESENTATION('',(#3856),#3862);+#3856 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3857,#3858,#3859,#3860,#3861),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3857 = CARTESIAN_POINT('',(1.531172078559,5.944653833805E-02));+#3858 = CARTESIAN_POINT('',(1.532227279041,6.461601151407E-02));+#3859 = CARTESIAN_POINT('',(1.532279454696,6.944304393614E-02));+#3860 = CARTESIAN_POINT('',(1.53132837274,7.392742647874E-02));+#3861 = CARTESIAN_POINT('',(1.529374124919,7.806906078788E-02));+#3862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3863 = PCURVE('',#3864,#3871);+#3864 = SURFACE_OF_LINEAR_EXTRUSION('',#3865,#3869);+#3865 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3866,#3867,#3868),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3866 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,+ 1.2500001));+#3867 = CARTESIAN_POINT('',(7.306927038431E-02,9.272347760265E-03,+ 1.2500001));+#3868 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,+ 1.2500001));+#3869 = VECTOR('',#3870,1.);+#3870 = DIRECTION('',(0.,0.,1.));+#3871 = DEFINITIONAL_REPRESENTATION('',(#3872),#3878);+#3872 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3873,#3874,#3875,#3876,#3877),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3873 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3874 = CARTESIAN_POINT('',(0.750010234577,-5.00001E-02));+#3875 = CARTESIAN_POINT('',(0.500009153841,-5.00001E-02));+#3876 = CARTESIAN_POINT('',(0.25000349495,-5.00001E-02));+#3877 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3879 = ORIENTED_EDGE('',*,*,#3880,.F.);+#3880 = EDGE_CURVE('',#3881,#3845,#3883,.T.);+#3881 = VERTEX_POINT('',#3882);+#3882 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,1.2)+ );+#3883 = SURFACE_CURVE('',#3884,(#3890,#3899),.PCURVE_S1.);+#3884 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3885,#3886,#3887,#3888,#3889),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3885 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,1.2)+ );+#3886 = CARTESIAN_POINT('',(7.788367725139E-02,7.935321675867E-05,1.2));+#3887 = CARTESIAN_POINT('',(7.380210080271E-02,3.1570203131E-03,1.2));+#3888 = CARTESIAN_POINT('',(6.87893364162E-02,5.349516946711E-03,1.2));+#3889 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,1.2));+#3890 = PCURVE('',#2438,#3891);+#3891 = DEFINITIONAL_REPRESENTATION('',(#3892),#3898);+#3892 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3893,#3894,#3895,#3896,#3897),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3893 = CARTESIAN_POINT('',(1.54859547874,7.12079205419E-02));+#3894 = CARTESIAN_POINT('',(1.543655060648,7.010373705439E-02));+#3895 = CARTESIAN_POINT('',(1.53910424432,6.777535310619E-02));+#3896 = CARTESIAN_POINT('',(1.534943241473,6.422276199678E-02));+#3897 = CARTESIAN_POINT('',(1.531172078559,5.944653833805E-02));+#3898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3899 = PCURVE('',#3900,#3907);+#3900 = SURFACE_OF_LINEAR_EXTRUSION('',#3901,#3905);+#3901 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3902,#3903,#3904),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3902 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,+ 1.2500001));+#3903 = CARTESIAN_POINT('',(7.473353793102E-02,4.041792613449E-03,+ 1.2500001));+#3904 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,+ 1.2500001));+#3905 = VECTOR('',#3906,1.);+#3906 = DIRECTION('',(0.,0.,1.));+#3907 = DEFINITIONAL_REPRESENTATION('',(#3908),#3914);+#3908 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3909,#3910,#3911,#3912,#3913),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3909 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3910 = CARTESIAN_POINT('',(0.749993540686,-5.00001E-02));+#3911 = CARTESIAN_POINT('',(0.499984788457,-5.00001E-02));+#3912 = CARTESIAN_POINT('',(0.249983644842,-5.00001E-02));+#3913 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3915 = ORIENTED_EDGE('',*,*,#3916,.F.);+#3916 = EDGE_CURVE('',#3917,#3881,#3919,.T.);+#3917 = VERTEX_POINT('',#3918);+#3918 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,1.2)+ );+#3919 = SURFACE_CURVE('',#3920,(#3926,#3935),.PCURVE_S1.);+#3920 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3921,#3922,#3923,#3924,#3925),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3921 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,1.2)+ );+#3922 = CARTESIAN_POINT('',(8.733442078472E-02,-1.810929951197E-02,1.2)+ );+#3923 = CARTESIAN_POINT('',(8.628450842163E-02,-1.258802732959E-02,1.2)+ );+#3924 = CARTESIAN_POINT('',(8.418431267137E-02,-7.845974355545E-03,1.2)+ );+#3925 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,1.2)+ );+#3926 = PCURVE('',#2438,#3927);+#3927 = DEFINITIONAL_REPRESENTATION('',(#3928),#3934);+#3928 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3929,#3930,#3931,#3932,#3933),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3929 = CARTESIAN_POINT('',(1.569812612555,6.791488366014E-02));+#3930 = CARTESIAN_POINT('',(1.564144771161,7.066534593374E-02));+#3931 = CARTESIAN_POINT('',(1.558719109555,7.213127861509E-02));+#3932 = CARTESIAN_POINT('',(1.553535945771,7.231211496751E-02));+#3933 = CARTESIAN_POINT('',(1.54859547874,7.12079205419E-02));+#3934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3935 = PCURVE('',#3936,#3943);+#3936 = SURFACE_OF_LINEAR_EXTRUSION('',#3937,#3941);+#3937 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3938,#3939,#3940),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3938 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,+ 1.2500001));+#3939 = CARTESIAN_POINT('',(8.733442078472E-02,-1.180837449812E-02,+ 1.2500001));+#3940 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,+ 1.2500001));+#3941 = VECTOR('',#3942,1.);+#3942 = DIRECTION('',(0.,0.,1.));+#3943 = DEFINITIONAL_REPRESENTATION('',(#3944),#3950);+#3944 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3945,#3946,#3947,#3948,#3949),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3945 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3946 = CARTESIAN_POINT('',(0.750019188616,-5.00001E-02));+#3947 = CARTESIAN_POINT('',(0.500018752145,-5.00001E-02));+#3948 = CARTESIAN_POINT('',(0.250008935888,-5.00001E-02));+#3949 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3951 = ORIENTED_EDGE('',*,*,#3952,.F.);+#3952 = EDGE_CURVE('',#3953,#3917,#3955,.T.);+#3953 = VERTEX_POINT('',#3954);+#3954 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,1.2)+ );+#3955 = SURFACE_CURVE('',#3956,(#3965,#3977),.PCURVE_S1.);+#3956 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3957,#3958,#3959,#3960,#3961,+ #3962,#3963,#3964),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269990812252,+ 1.),.UNSPECIFIED.);+#3957 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,1.2)+ );+#3958 = CARTESIAN_POINT('',(7.849119565106E-02,-4.823286927586E-02,1.2)+ );+#3959 = CARTESIAN_POINT('',(7.974713883213E-02,-4.692846649377E-02,1.2)+ );+#3960 = CARTESIAN_POINT('',(8.087887393068E-02,-4.553931641813E-02,1.2)+ );+#3961 = CARTESIAN_POINT('',(8.461055457923E-02,-4.008029203516E-02,1.2)+ );+#3962 = CARTESIAN_POINT('',(8.64266132596E-02,-3.547567239226E-02,1.2));+#3963 = CARTESIAN_POINT('',(8.733442078472E-02,-3.025178754329E-02,1.2)+ );+#3964 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,1.2)+ );+#3965 = PCURVE('',#2438,#3966);+#3966 = DEFINITIONAL_REPRESENTATION('',(#3967),#3976);+#3967 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3968,#3969,#3970,#3971,#3972,+ #3973,#3974,#3975),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269990812252,+ 1.),.UNSPECIFIED.);+#3968 = CARTESIAN_POINT('',(1.587879763404,4.778380872087E-02));+#3969 = CARTESIAN_POINT('',(1.587385031215,4.955794441939E-02));+#3970 = CARTESIAN_POINT('',(1.586759832786,5.125735220336E-02));+#3971 = CARTESIAN_POINT('',(1.586004163029,5.288201385571E-02));+#3972 = CARTESIAN_POINT('',(1.582722071617,5.862259428238E-02));+#3973 = CARTESIAN_POINT('',(1.579372326513,6.226674012556E-02));+#3974 = CARTESIAN_POINT('',(1.575068923042,6.536412708644E-02));+#3975 = CARTESIAN_POINT('',(1.569812612555,6.791488366014E-02));+#3976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3977 = PCURVE('',#3978,#3985);+#3978 = SURFACE_OF_LINEAR_EXTRUSION('',#3979,#3983);+#3979 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3980,#3981,#3982),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3980 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,+ 1.2500001));+#3981 = CARTESIAN_POINT('',(8.733442078472E-02,-4.041792613449E-02,+ 1.2500001));+#3982 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,+ 1.2500001));+#3983 = VECTOR('',#3984,1.);+#3984 = DIRECTION('',(0.,0.,1.));+#3985 = DEFINITIONAL_REPRESENTATION('',(#3986),#3995);+#3986 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3987,#3988,#3989,#3990,#3991,+ #3992,#3993,#3994),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269990812252,+ 1.),.UNSPECIFIED.);+#3987 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3988 = CARTESIAN_POINT('',(0.932501009841,-5.00001E-02));+#3989 = CARTESIAN_POINT('',(0.865001011785,-5.00001E-02));+#3990 = CARTESIAN_POINT('',(0.797500507799,-5.00001E-02));+#3991 = CARTESIAN_POINT('',(0.547490119534,-5.00001E-02));+#3992 = CARTESIAN_POINT('',(0.364980210132,-5.00001E-02));+#3993 = CARTESIAN_POINT('',(0.182480200908,-5.00001E-02));+#3994 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3996 = ORIENTED_EDGE('',*,*,#3997,.F.);+#3997 = EDGE_CURVE('',#3998,#3953,#4000,.T.);+#3998 = VERTEX_POINT('',#3999);+#3999 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,1.2)+ );+#4000 = SURFACE_CURVE('',#4001,(#4007,#4016),.PCURVE_S1.);+#4001 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4002,#4003,#4004,#4005,#4006),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4002 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,1.2)+ );+#4003 = CARTESIAN_POINT('',(5.785141271471E-02,-5.848711664167E-02,1.2)+ );+#4004 = CARTESIAN_POINT('',(6.557886838611E-02,-5.698191661454E-02,1.2)+ );+#4005 = CARTESIAN_POINT('',(7.199891102928E-02,-5.397023708116E-02,1.2)+ );+#4006 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,1.2)+ );+#4007 = PCURVE('',#2438,#4008);+#4008 = DEFINITIONAL_REPRESENTATION('',(#4009),#4015);+#4009 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4010,#4011,#4012,#4013,#4014),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4010 = CARTESIAN_POINT('',(1.583655777398,1.838567710344E-02));+#4011 = CARTESIAN_POINT('',(1.587599398266,2.651224470195E-02));+#4012 = CARTESIAN_POINT('',(1.589618910237,3.412150022884E-02));+#4013 = CARTESIAN_POINT('',(1.58971230184,4.121222932819E-02));+#4014 = CARTESIAN_POINT('',(1.587879763404,4.778380872087E-02));+#4015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4016 = PCURVE('',#4017,#4024);+#4017 = SURFACE_OF_LINEAR_EXTRUSION('',#4018,#4022);+#4018 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4019,#4020,#4021),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4019 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,+ 1.2500001));+#4020 = CARTESIAN_POINT('',(6.68877052108E-02,-5.848711664167E-02,+ 1.2500001));+#4021 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,+ 1.2500001));+#4022 = VECTOR('',#4023,1.);+#4023 = DIRECTION('',(0.,0.,1.));+#4024 = DEFINITIONAL_REPRESENTATION('',(#4025),#4031);+#4025 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4026,#4027,#4028,#4029,#4030),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4026 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4027 = CARTESIAN_POINT('',(0.750046965095,-5.00001E-02));+#4028 = CARTESIAN_POINT('',(0.500046748987,-5.00001E-02));+#4029 = CARTESIAN_POINT('',(0.250023136968,-5.00001E-02));+#4030 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4032 = ORIENTED_EDGE('',*,*,#4033,.F.);+#4033 = EDGE_CURVE('',#4034,#3998,#4036,.T.);+#4034 = VERTEX_POINT('',#4035);+#4035 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,1.2)+ );+#4036 = SURFACE_CURVE('',#4037,(#4043,#4052),.PCURVE_S1.);+#4037 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4038,#4039,#4040,#4041,#4042),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4038 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,1.2)+ );+#4039 = CARTESIAN_POINT('',(2.565793715929E-02,-5.39900549396E-02,1.2));+#4040 = CARTESIAN_POINT('',(3.206477719334E-02,-5.698852284052E-02,1.2)+ );+#4041 = CARTESIAN_POINT('',(3.978563016475E-02,-5.848711664167E-02,1.2)+ );+#4042 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,1.2)+ );+#4043 = PCURVE('',#2438,#4044);+#4044 = DEFINITIONAL_REPRESENTATION('',(#4045),#4051);+#4045 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4046,#4047,#4048,#4049,#4050),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4046 = CARTESIAN_POINT('',(1.563228551672,-3.105381095824E-03));+#4047 = CARTESIAN_POINT('',(1.569498392618,-4.877002395878E-04));+#4048 = CARTESIAN_POINT('',(1.574993129754,3.967215336335E-03));+#4049 = CARTESIAN_POINT('',(1.579712162413,1.025912162539E-02));+#4050 = CARTESIAN_POINT('',(1.583655777398,1.838567710344E-02));+#4051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4052 = PCURVE('',#4053,#4060);+#4053 = SURFACE_OF_LINEAR_EXTRUSION('',#4054,#4058);+#4054 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4055,#4056,#4057),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4055 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,+ 1.2500001));+#4056 = CARTESIAN_POINT('',(3.074932419643E-02,-5.848711664167E-02,+ 1.2500001));+#4057 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,+ 1.2500001));+#4058 = VECTOR('',#4059,1.);+#4059 = DIRECTION('',(0.,0.,1.));+#4060 = DEFINITIONAL_REPRESENTATION('',(#4061),#4067);+#4061 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4062,#4063,#4064,#4065,#4066),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4062 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4063 = CARTESIAN_POINT('',(0.749976474861,-5.00001E-02));+#4064 = CARTESIAN_POINT('',(0.499952743585,-5.00001E-02));+#4065 = CARTESIAN_POINT('',(0.249952662109,-5.00001E-02));+#4066 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4068 = ORIENTED_EDGE('',*,*,#4069,.F.);+#4069 = EDGE_CURVE('',#4070,#4034,#4072,.T.);+#4070 = VERTEX_POINT('',#4071);+#4071 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,1.2)+ );+#4072 = SURFACE_CURVE('',#4073,(#4079,#4088),.PCURVE_S1.);+#4073 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4074,#4075,#4076,#4077,#4078),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4074 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,1.2)+ );+#4075 = CARTESIAN_POINT('',(1.038185945807E-02,-3.253151528687E-02,1.2)+ );+#4076 = CARTESIAN_POINT('',(1.207874206974E-02,-3.934097847959E-02,1.2)+ );+#4077 = CARTESIAN_POINT('',(1.547363138318E-02,-4.499457863152E-02,1.2)+ );+#4078 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,1.2)+ );+#4079 = PCURVE('',#2438,#4080);+#4080 = DEFINITIONAL_REPRESENTATION('',(#4081),#4087);+#4081 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4082,#4083,#4084,#4085,#4086),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4082 = CARTESIAN_POINT('',(1.536358935592,-1.385717456872E-03));+#4083 = CARTESIAN_POINT('',(1.543523635507,-4.862567892538E-03));+#4084 = CARTESIAN_POINT('',(1.550390692408,-6.308849016927E-03));+#4085 = CARTESIAN_POINT('',(1.55695918461,-5.722864103374E-03));+#4086 = CARTESIAN_POINT('',(1.563228551672,-3.105381095824E-03));+#4087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4088 = PCURVE('',#4089,#4096);+#4089 = SURFACE_OF_LINEAR_EXTRUSION('',#4090,#4094);+#4090 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4091,#4092,#4093),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4091 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,+ 1.2500001));+#4092 = CARTESIAN_POINT('',(1.038185945807E-02,-4.049717697005E-02,+ 1.2500001));+#4093 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,+ 1.2500001));+#4094 = VECTOR('',#4095,1.);+#4095 = DIRECTION('',(0.,0.,1.));+#4096 = DEFINITIONAL_REPRESENTATION('',(#4097),#4103);+#4097 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4098,#4099,#4100,#4101,#4102),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4098 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4099 = CARTESIAN_POINT('',(0.750029904094,-5.00001E-02));+#4100 = CARTESIAN_POINT('',(0.500023028998,-5.00001E-02));+#4101 = CARTESIAN_POINT('',(0.250004627944,-5.00001E-02));+#4102 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4104 = ORIENTED_EDGE('',*,*,#4105,.F.);+#4105 = EDGE_CURVE('',#4106,#4070,#4108,.T.);+#4106 = VERTEX_POINT('',#4107);+#4107 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,1.2)+ );+#4108 = SURFACE_CURVE('',#4109,(#4115,#4124),.PCURVE_S1.);+#4109 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4110,#4111,#4112,#4113,#4114),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4110 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,1.2)+ );+#4111 = CARTESIAN_POINT('',(1.353196363603E-02,-7.905418165313E-03,1.2)+ );+#4112 = CARTESIAN_POINT('',(1.143176867804E-02,-1.267389361412E-02,1.2)+ );+#4113 = CARTESIAN_POINT('',(1.038185945807E-02,-1.822818829519E-02,1.2)+ );+#4114 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,1.2)+ );+#4115 = PCURVE('',#2438,#4116);+#4116 = DEFINITIONAL_REPRESENTATION('',(#4117),#4123);+#4117 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4118,#4119,#4120,#4121,#4122),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4118 = CARTESIAN_POINT('',(1.520536199965,1.329577184165E-02));+#4119 = CARTESIAN_POINT('',(1.522743723441,8.722831265564E-03));+#4120 = CARTESIAN_POINT('',(1.526116834194,4.751521555476E-03));+#4121 = CARTESIAN_POINT('',(1.530655455933,1.382039179084E-03));+#4122 = CARTESIAN_POINT('',(1.536358935592,-1.385717456872E-03));+#4123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4124 = PCURVE('',#4125,#4132);+#4125 = SURFACE_OF_LINEAR_EXTRUSION('',#4126,#4130);+#4126 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4127,#4128,#4129),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4127 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,+ 1.2500001));+#4128 = CARTESIAN_POINT('',(1.038185945807E-02,-1.188762533367E-02,+ 1.2500001));+#4129 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,+ 1.2500001));+#4130 = VECTOR('',#4131,1.);+#4131 = DIRECTION('',(0.,0.,1.));+#4132 = DEFINITIONAL_REPRESENTATION('',(#4133),#4139);+#4133 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4134,#4135,#4136,#4137,#4138),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4134 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4135 = CARTESIAN_POINT('',(0.749990751801,-5.00001E-02));+#4136 = CARTESIAN_POINT('',(0.499980790181,-5.00001E-02));+#4137 = CARTESIAN_POINT('',(0.249980437237,-5.00001E-02));+#4138 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4140 = ORIENTED_EDGE('',*,*,#4141,.F.);+#4141 = EDGE_CURVE('',#3593,#4106,#4142,.T.);+#4142 = SURFACE_CURVE('',#4143,(#4149,#4158),.PCURVE_S1.);+#4143 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4144,#4145,#4146,#4147,#4148),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4144 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,1.2));+#4145 = CARTESIAN_POINT('',(2.892694092236E-02,5.349516307778E-03,1.2));+#4146 = CARTESIAN_POINT('',(2.391417536178E-02,3.150414972266E-03,1.2));+#4147 = CARTESIAN_POINT('',(1.983260056519E-02,5.953795267843E-05,1.2));+#4148 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,1.2)+ );+#4149 = PCURVE('',#2438,#4150);+#4150 = DEFINITIONAL_REPRESENTATION('',(#4151),#4157);+#4151 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4152,#4153,#4154,#4155,#4156),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4152 = CARTESIAN_POINT('',(1.518958396669,3.427796487716E-02));+#4153 = CARTESIAN_POINT('',(1.517539948609,2.836002406469E-02));+#4154 = CARTESIAN_POINT('',(1.517329905143,2.289012945954E-02));+#4155 = CARTESIAN_POINT('',(1.518328702814,1.786865788418E-02));+#4156 = CARTESIAN_POINT('',(1.520536199965,1.329577184165E-02));+#4157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4158 = PCURVE('',#4159,#4166);+#4159 = SURFACE_OF_LINEAR_EXTRUSION('',#4160,#4164);+#4160 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4161,#4162,#4163),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4161 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,+ 1.2500001));+#4162 = CARTESIAN_POINT('',(2.298274231177E-02,4.041792613449E-03,+ 1.2500001));+#4163 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,+ 1.2500001));+#4164 = VECTOR('',#4165,1.);+#4165 = DIRECTION('',(0.,0.,1.));+#4166 = DEFINITIONAL_REPRESENTATION('',(#4167),#4173);+#4167 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4168,#4169,#4170,#4171,#4172),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4168 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4169 = CARTESIAN_POINT('',(0.750016233004,-5.00001E-02));+#4170 = CARTESIAN_POINT('',(0.500015001732,-5.00001E-02));+#4171 = CARTESIAN_POINT('',(0.250006266771,-5.00001E-02));+#4172 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4174 = FACE_BOUND('',#4175,.T.);+#4175 = EDGE_LOOP('',(#4176,#4214,#4250,#4286,#4322,#4358,#4394,#4430));+#4176 = ORIENTED_EDGE('',*,*,#4177,.F.);+#4177 = EDGE_CURVE('',#4178,#4180,#4182,.T.);+#4178 = VERTEX_POINT('',#4179);+#4179 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.2));+#4180 = VERTEX_POINT('',#4181);+#4181 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.2));+#4182 = SURFACE_CURVE('',#4183,(#4189,#4198),.PCURVE_S1.);+#4183 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4184,#4185,#4186,#4187,#4188),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4184 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.2));+#4185 = CARTESIAN_POINT('',(0.170330273422,5.650518159429E-02,1.2));+#4186 = CARTESIAN_POINT('',(0.163937070484,6.168425006623E-02,1.2));+#4187 = CARTESIAN_POINT('',(0.156004020572,6.427242763739E-02,1.2));+#4188 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.2));+#4189 = PCURVE('',#2438,#4190);+#4190 = DEFINITIONAL_REPRESENTATION('',(#4191),#4197);+#4191 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4192,#4193,#4194,#4195,#4196),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4192 = CARTESIAN_POINT('',(1.542357295473,0.178885399426));+#4193 = CARTESIAN_POINT('',(1.533251535365,0.177909181784));+#4194 = CARTESIAN_POINT('',(1.525800945481,0.174418550836));+#4195 = CARTESIAN_POINT('',(1.52000901236,0.168411433825));+#4196 = CARTESIAN_POINT('',(1.515874897735,0.159892318249));+#4197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4198 = PCURVE('',#4199,#4206);+#4199 = SURFACE_OF_LINEAR_EXTRUSION('',#4200,#4204);+#4200 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4201,#4202,#4203),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4201 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.2500001)+ );+#4202 = CARTESIAN_POINT('',(0.165475744645,6.427242763739E-02,1.2500001)+ );+#4203 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.2500001)+ );+#4204 = VECTOR('',#4205,1.);+#4205 = DIRECTION('',(0.,0.,1.));+#4206 = DEFINITIONAL_REPRESENTATION('',(#4207),#4213);+#4207 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4208,#4209,#4210,#4211,#4212),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4208 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4209 = CARTESIAN_POINT('',(0.750021378724,-5.00001E-02));+#4210 = CARTESIAN_POINT('',(0.499992262675,-5.00001E-02));+#4211 = CARTESIAN_POINT('',(0.249967023196,-5.00001E-02));+#4212 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4214 = ORIENTED_EDGE('',*,*,#4215,.F.);+#4215 = EDGE_CURVE('',#4216,#4178,#4218,.T.);+#4216 = VERTEX_POINT('',#4217);+#4217 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.2));+#4218 = SURFACE_CURVE('',#4219,(#4225,#4234),.PCURVE_S1.);+#4219 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4220,#4221,#4222,#4223,#4224),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4220 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.2));+#4221 = CARTESIAN_POINT('',(0.184892199356,1.801912090511E-02,1.2));+#4222 = CARTESIAN_POINT('',(0.183276389202,3.072768593738E-02,1.2));+#4223 = CARTESIAN_POINT('',(0.18004041721,4.096895153265E-02,1.2));+#4224 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.2));+#4225 = PCURVE('',#2438,#4226);+#4226 = DEFINITIONAL_REPRESENTATION('',(#4227),#4233);+#4227 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4228,#4229,#4230,#4231,#4232),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4228 = CARTESIAN_POINT('',(1.587877918888,0.167586329837));+#4229 = CARTESIAN_POINT('',(1.574233542283,0.174207605997));+#4230 = CARTESIAN_POINT('',(1.562094674411,0.178302279905));+#4231 = CARTESIAN_POINT('',(1.551468208385,0.179862169495));+#4232 = CARTESIAN_POINT('',(1.542357295473,0.178885399426));+#4233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4234 = PCURVE('',#4235,#4242);+#4235 = SURFACE_OF_LINEAR_EXTRUSION('',#4236,#4240);+#4236 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4237,#4238,#4239),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4237 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.2500001)+ );+#4238 = CARTESIAN_POINT('',(0.184892199356,3.320610009873E-02,1.2500001)+ );+#4239 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.2500001)+ );+#4240 = VECTOR('',#4241,1.);+#4241 = DIRECTION('',(0.,0.,1.));+#4242 = DEFINITIONAL_REPRESENTATION('',(#4243),#4249);+#4243 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4244,#4245,#4246,#4247,#4248),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4244 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4245 = CARTESIAN_POINT('',(0.750172044941,-5.00001E-02));+#4246 = CARTESIAN_POINT('',(0.500194881383,-5.00001E-02));+#4247 = CARTESIAN_POINT('',(0.250120080197,-5.00001E-02));+#4248 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4250 = ORIENTED_EDGE('',*,*,#4251,.F.);+#4251 = EDGE_CURVE('',#4252,#4216,#4254,.T.);+#4252 = VERTEX_POINT('',#4253);+#4253 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,1.2));+#4254 = SURFACE_CURVE('',#4255,(#4261,#4270),.PCURVE_S1.);+#4255 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4256,#4257,#4258,#4259,#4260),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4256 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,1.2));+#4257 = CARTESIAN_POINT('',(0.18004039772,-3.518367172136E-02,1.2));+#4258 = CARTESIAN_POINT('',(0.183276371208,-2.495566551928E-02,1.2));+#4259 = CARTESIAN_POINT('',(0.184892199356,-1.22735467092E-02,1.2));+#4260 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.2));+#4261 = PCURVE('',#2438,#4262);+#4262 = DEFINITIONAL_REPRESENTATION('',(#4263),#4269);+#4263 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4264,#4265,#4266,#4267,#4268),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4264 = CARTESIAN_POINT('',(1.624850325202,0.138853586547));+#4265 = CARTESIAN_POINT('',(1.619979926668,0.146615117199));+#4266 = CARTESIAN_POINT('',(1.612190938999,0.153991790323));+#4267 = CARTESIAN_POINT('',(1.601486746161,0.160982304882));+#4268 = CARTESIAN_POINT('',(1.587877918888,0.167586329837));+#4269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4270 = PCURVE('',#4271,#4278);+#4271 = SURFACE_OF_LINEAR_EXTRUSION('',#4272,#4276);+#4272 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4273,#4274,#4275),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4273 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.2500001)+ );+#4274 = CARTESIAN_POINT('',(0.184892199356,-2.742078910301E-02,1.2500001+ ));+#4275 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,1.2500001+ ));+#4276 = VECTOR('',#4277,1.);+#4277 = DIRECTION('',(0.,0.,1.));+#4278 = DEFINITIONAL_REPRESENTATION('',(#4279),#4285);+#4279 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4280,#4281,#4282,#4283,#4284),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4280 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4281 = CARTESIAN_POINT('',(0.749880923604,-5.00001E-02));+#4282 = CARTESIAN_POINT('',(0.49980671609,-5.00001E-02));+#4283 = CARTESIAN_POINT('',(0.249829344256,-5.00001E-02));+#4284 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4286 = ORIENTED_EDGE('',*,*,#4287,.F.);+#4287 = EDGE_CURVE('',#4288,#4252,#4290,.T.);+#4288 = VERTEX_POINT('',#4289);+#4289 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,1.2));+#4290 = SURFACE_CURVE('',#4291,(#4297,#4306),.PCURVE_S1.);+#4291 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4292,#4293,#4294,#4295,#4296),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4292 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,1.2));+#4293 = CARTESIAN_POINT('',(0.156004020571,-5.848711664167E-02,1.2));+#4294 = CARTESIAN_POINT('',(0.163937070485,-5.589893907015E-02,1.2));+#4295 = CARTESIAN_POINT('',(0.170330273422,-5.071987059879E-02,1.2));+#4296 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,1.2));+#4297 = PCURVE('',#2438,#4298);+#4298 = DEFINITIONAL_REPRESENTATION('',(#4299),#4305);+#4299 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4300,#4301,#4302,#4303,#4304),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4300 = CARTESIAN_POINT('',(1.626317164848,0.106297436529));+#4301 = CARTESIAN_POINT('',(1.630451279473,0.114816552105));+#4302 = CARTESIAN_POINT('',(1.631586235406,0.123083584167));+#4303 = CARTESIAN_POINT('',(1.629717988748,0.131096414406));+#4304 = CARTESIAN_POINT('',(1.624850325202,0.138853586547));+#4305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4306 = PCURVE('',#4307,#4314);+#4307 = SURFACE_OF_LINEAR_EXTRUSION('',#4308,#4312);+#4308 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4309,#4310,#4311),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4309 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,1.2500001+ ));+#4310 = CARTESIAN_POINT('',(0.165475744645,-5.848711664167E-02,1.2500001+ ));+#4311 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,1.2500001+ ));+#4312 = VECTOR('',#4313,1.);+#4313 = DIRECTION('',(0.,0.,1.));+#4314 = DEFINITIONAL_REPRESENTATION('',(#4315),#4321);+#4315 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4316,#4317,#4318,#4319,#4320),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4316 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4317 = CARTESIAN_POINT('',(0.750032976816,-5.00001E-02));+#4318 = CARTESIAN_POINT('',(0.500007737294,-5.00001E-02));+#4319 = CARTESIAN_POINT('',(0.249978621283,-5.00001E-02));+#4320 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4322 = ORIENTED_EDGE('',*,*,#4323,.F.);+#4323 = EDGE_CURVE('',#4324,#4288,#4326,.T.);+#4324 = VERTEX_POINT('',#4325);+#4325 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.2));+#4326 = SURFACE_CURVE('',#4327,(#4333,#4342),.PCURVE_S1.);+#4327 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4328,#4329,#4330,#4331,#4332),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4328 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.2));+#4329 = CARTESIAN_POINT('',(0.1227591334,-5.071987465608E-02,1.2));+#4330 = CARTESIAN_POINT('',(0.129139128465,-5.589894430797E-02,1.2));+#4331 = CARTESIAN_POINT('',(0.137065578896,-5.848711664167E-02,1.2));+#4332 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,1.2));+#4333 = PCURVE('',#2438,#4334);+#4334 = DEFINITIONAL_REPRESENTATION('',(#4335),#4341);+#4335 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4336,#4337,#4338,#4339,#4340),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4336 = CARTESIAN_POINT('',(1.599852066943,8.734000488887E-02));+#4337 = CARTESIAN_POINT('',(1.608949182627,8.829839978803E-02));+#4338 = CARTESIAN_POINT('',(1.616394007224,9.177714758073E-02));+#4339 = CARTESIAN_POINT('',(1.622183054404,9.777832956699E-02));+#4340 = CARTESIAN_POINT('',(1.626317164848,0.106297436529));+#4341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4342 = PCURVE('',#4343,#4350);+#4343 = SURFACE_OF_LINEAR_EXTRUSION('',#4344,#4348);+#4344 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4345,#4346,#4347),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4345 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,1.2500001+ ));+#4346 = CARTESIAN_POINT('',(0.127593845248,-5.848711664167E-02,1.2500001+ ));+#4347 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.2500001)+ );+#4348 = VECTOR('',#4349,1.);+#4349 = DIRECTION('',(0.,0.,1.));+#4350 = DEFINITIONAL_REPRESENTATION('',(#4351),#4357);+#4351 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4352,#4353,#4354,#4355,#4356),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4352 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4353 = CARTESIAN_POINT('',(0.750021248116,-5.00001E-02));+#4354 = CARTESIAN_POINT('',(0.499992006929,-5.00001E-02));+#4355 = CARTESIAN_POINT('',(0.249966770431,-5.00001E-02));+#4356 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4358 = ORIENTED_EDGE('',*,*,#4359,.F.);+#4359 = EDGE_CURVE('',#4360,#4324,#4362,.T.);+#4360 = VERTEX_POINT('',#4361);+#4361 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.2));+#4362 = SURFACE_CURVE('',#4363,(#4369,#4378),.PCURVE_S1.);+#4363 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4364,#4365,#4366,#4367,#4368),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4364 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.2));+#4365 = CARTESIAN_POINT('',(0.108256641372,-1.227353898611E-02,1.2));+#4366 = CARTESIAN_POINT('',(0.109865872662,-2.49556525528E-02,1.2));+#4367 = CARTESIAN_POINT('',(0.11308863479,-3.518366377487E-02,1.2));+#4368 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.2));+#4369 = PCURVE('',#2438,#4370);+#4370 = DEFINITIONAL_REPRESENTATION('',(#4371),#4377);+#4371 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4372,#4373,#4374,#4375,#4376),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4372 = CARTESIAN_POINT('',(1.554420042436,9.864012435049E-02));+#4373 = CARTESIAN_POINT('',(1.568028862762,9.203610276761E-02));+#4374 = CARTESIAN_POINT('',(1.58014106099,8.794705838788E-02));+#4375 = CARTESIAN_POINT('',(1.590749835323,8.638107101813E-02));+#4376 = CARTESIAN_POINT('',(1.599852066943,8.734000488887E-02));+#4377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4378 = PCURVE('',#4379,#4386);+#4379 = SURFACE_OF_LINEAR_EXTRUSION('',#4380,#4384);+#4380 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4381,#4382,#4383),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4381 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.2500001)+ );+#4382 = CARTESIAN_POINT('',(0.108256641372,-2.742078910301E-02,1.2500001+ ));+#4383 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.2500001)+ );+#4384 = VECTOR('',#4385,1.);+#4385 = DIRECTION('',(0.,0.,1.));+#4386 = DEFINITIONAL_REPRESENTATION('',(#4387),#4393);+#4387 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4388,#4389,#4390,#4391,#4392),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4388 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4389 = CARTESIAN_POINT('',(0.750170783298,-5.00001E-02));+#4390 = CARTESIAN_POINT('',(0.500193539408,-5.00001E-02));+#4391 = CARTESIAN_POINT('',(0.250119332187,-5.00001E-02));+#4392 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4394 = ORIENTED_EDGE('',*,*,#4395,.F.);+#4395 = EDGE_CURVE('',#4396,#4360,#4398,.T.);+#4396 = VERTEX_POINT('',#4397);+#4397 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.2));+#4398 = SURFACE_CURVE('',#4399,(#4405,#4414),.PCURVE_S1.);+#4399 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4400,#4401,#4402,#4403,#4404),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4400 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.2));+#4401 = CARTESIAN_POINT('',(0.113088615378,4.096894358414E-02,1.2));+#4402 = CARTESIAN_POINT('',(0.109865854741,3.072767294699E-02,1.2));+#4403 = CARTESIAN_POINT('',(0.108256641372,1.801911315597E-02,1.2));+#4404 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.2));+#4405 = PCURVE('',#2438,#4406);+#4406 = DEFINITIONAL_REPRESENTATION('',(#4407),#4413);+#4407 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4408,#4409,#4410,#4411,#4412),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4408 = CARTESIAN_POINT('',(1.517359037215,0.127371817768));+#4409 = CARTESIAN_POINT('',(1.522238114356,0.119628081376));+#4410 = CARTESIAN_POINT('',(1.530044804075,0.112257504327));+#4411 = CARTESIAN_POINT('',(1.540775672803,0.105261397127));+#4412 = CARTESIAN_POINT('',(1.554420042436,9.864012435049E-02));+#4413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4414 = PCURVE('',#4415,#4422);+#4415 = SURFACE_OF_LINEAR_EXTRUSION('',#4416,#4420);+#4416 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4417,#4418,#4419),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4417 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.2500001)+ );+#4418 = CARTESIAN_POINT('',(0.108256641372,3.320610009873E-02,1.2500001)+ );+#4419 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.2500001)+ );+#4420 = VECTOR('',#4421,1.);+#4421 = DIRECTION('',(0.,0.,1.));+#4422 = DEFINITIONAL_REPRESENTATION('',(#4423),#4429);+#4423 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4424,#4425,#4426,#4427,#4428),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4424 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4425 = CARTESIAN_POINT('',(0.749879663946,-5.00001E-02));+#4426 = CARTESIAN_POINT('',(0.499804863173,-5.00001E-02));+#4427 = CARTESIAN_POINT('',(0.249827827409,-5.00001E-02));+#4428 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4430 = ORIENTED_EDGE('',*,*,#4431,.F.);+#4431 = EDGE_CURVE('',#4180,#4396,#4432,.T.);+#4432 = SURFACE_CURVE('',#4433,(#4442,#4454),.PCURVE_S1.);+#4433 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4434,#4435,#4436,#4437,#4438,+ #4439,#4440,#4441),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#4434 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.2));+#4435 = CARTESIAN_POINT('',(0.141430851022,6.427242763739E-02,1.2));+#4436 = CARTESIAN_POINT('',(0.136775119528,6.352049847403E-02,1.2));+#4437 = CARTESIAN_POINT('',(0.132568177797,6.201621349668E-02,1.2));+#4438 = CARTESIAN_POINT('',(0.125596214752,5.782979413139E-02,1.2));+#4439 = CARTESIAN_POINT('',(0.122710627076,5.534963279337E-02,1.2));+#4440 = CARTESIAN_POINT('',(0.12015364809,5.231932400602E-02,1.2));+#4441 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.2));+#4442 = PCURVE('',#2438,#4443);+#4443 = DEFINITIONAL_REPRESENTATION('',(#4444),#4453);+#4444 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4445,#4446,#4447,#4448,#4449,+ #4450,#4451,#4452),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#4445 = CARTESIAN_POINT('',(1.515874897735,0.159892318249));+#4446 = CARTESIAN_POINT('',(1.513646596282,0.155300486782));+#4447 = CARTESIAN_POINT('',(1.512290460446,0.15078361521));+#4448 = CARTESIAN_POINT('',(1.511807126123,0.146342036666));+#4449 = CARTESIAN_POINT('',(1.512529645187,0.1382418921));+#4450 = CARTESIAN_POINT('',(1.513501153443,0.134563035184));+#4451 = CARTESIAN_POINT('',(1.515111074589,0.130939629771));+#4452 = CARTESIAN_POINT('',(1.517359037215,0.127371817768));+#4453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4454 = PCURVE('',#4455,#4462);+#4455 = SURFACE_OF_LINEAR_EXTRUSION('',#4456,#4460);+#4456 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4457,#4458,#4459),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4457 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.2500001)+ );+#4458 = CARTESIAN_POINT('',(0.127593845248,6.427242763739E-02,1.2500001)+ );+#4459 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.2500001)+ );+#4460 = VECTOR('',#4461,1.);+#4461 = DIRECTION('',(0.,0.,1.));+#4462 = DEFINITIONAL_REPRESENTATION('',(#4463),#4472);+#4463 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4464,#4465,#4466,#4467,#4468,+ #4469,#4470,#4471),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#4464 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4465 = CARTESIAN_POINT('',(0.865266947925,-5.00001E-02));+#4466 = CARTESIAN_POINT('',(0.730516915609,-5.00001E-02));+#4467 = CARTESIAN_POINT('',(0.595758420251,-5.00001E-02));+#4468 = CARTESIAN_POINT('',(0.345744581319,-5.00001E-02));+#4469 = CARTESIAN_POINT('',(0.230489216146,-5.00001E-02));+#4470 = CARTESIAN_POINT('',(0.115239245241,-5.00001E-02));+#4471 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4473 = FACE_BOUND('',#4474,.T.);+#4474 = EDGE_LOOP('',(#4475,#4513,#4549,#4585,#4621,#4657,#4693,#4729));+#4475 = ORIENTED_EDGE('',*,*,#4476,.F.);+#4476 = EDGE_CURVE('',#4477,#4479,#4481,.T.);+#4477 = VERTEX_POINT('',#4478);+#4478 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.2));+#4479 = VERTEX_POINT('',#4480);+#4480 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.2));+#4481 = SURFACE_CURVE('',#4482,(#4488,#4497),.PCURVE_S1.);+#4482 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4483,#4484,#4485,#4486,#4487),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4483 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.2));+#4484 = CARTESIAN_POINT('',(0.268046553664,5.650518159429E-02,1.2));+#4485 = CARTESIAN_POINT('',(0.261653350727,6.168425006623E-02,1.2));+#4486 = CARTESIAN_POINT('',(0.253720300814,6.427242763739E-02,1.2));+#4487 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.2));+#4488 = PCURVE('',#2438,#4489);+#4489 = DEFINITIONAL_REPRESENTATION('',(#4490),#4496);+#4490 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4491,#4492,#4493,#4494,#4495),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4491 = CARTESIAN_POINT('',(1.585018682923,0.266797158852));+#4492 = CARTESIAN_POINT('',(1.575912922815,0.265820941209));+#4493 = CARTESIAN_POINT('',(1.568462332931,0.262330310261));+#4494 = CARTESIAN_POINT('',(1.56267039981,0.256323193251));+#4495 = CARTESIAN_POINT('',(1.558536285185,0.247804077674));+#4496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4497 = PCURVE('',#4498,#4505);+#4498 = SURFACE_OF_LINEAR_EXTRUSION('',#4499,#4503);+#4499 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4500,#4501,#4502),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4500 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.2500001)+ );+#4501 = CARTESIAN_POINT('',(0.263192024888,6.427242763739E-02,1.2500001)+ );+#4502 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.2500001)+ );+#4503 = VECTOR('',#4504,1.);+#4504 = DIRECTION('',(0.,0.,1.));+#4505 = DEFINITIONAL_REPRESENTATION('',(#4506),#4512);+#4506 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4507,#4508,#4509,#4510,#4511),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4507 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4508 = CARTESIAN_POINT('',(0.750021378724,-5.00001E-02));+#4509 = CARTESIAN_POINT('',(0.499992262675,-5.00001E-02));+#4510 = CARTESIAN_POINT('',(0.249967023196,-5.00001E-02));+#4511 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4513 = ORIENTED_EDGE('',*,*,#4514,.F.);+#4514 = EDGE_CURVE('',#4515,#4477,#4517,.T.);+#4515 = VERTEX_POINT('',#4516);+#4516 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.2));+#4517 = SURFACE_CURVE('',#4518,(#4524,#4533),.PCURVE_S1.);+#4518 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4519,#4520,#4521,#4522,#4523),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4519 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.2));+#4520 = CARTESIAN_POINT('',(0.282608479599,1.801912090512E-02,1.2));+#4521 = CARTESIAN_POINT('',(0.280992669444,3.072768593738E-02,1.2));+#4522 = CARTESIAN_POINT('',(0.277756697453,4.096895153265E-02,1.2));+#4523 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.2));+#4524 = PCURVE('',#2438,#4525);+#4525 = DEFINITIONAL_REPRESENTATION('',(#4526),#4532);+#4526 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4527,#4528,#4529,#4530,#4531),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4527 = CARTESIAN_POINT('',(1.630539306338,0.255498089263));+#4528 = CARTESIAN_POINT('',(1.616894929733,0.262119365422));+#4529 = CARTESIAN_POINT('',(1.604756061861,0.266214039331));+#4530 = CARTESIAN_POINT('',(1.594129595835,0.267773928921));+#4531 = CARTESIAN_POINT('',(1.585018682923,0.266797158852));+#4532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4533 = PCURVE('',#4534,#4541);+#4534 = SURFACE_OF_LINEAR_EXTRUSION('',#4535,#4539);+#4535 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4536,#4537,#4538),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4536 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.2500001)+ );+#4537 = CARTESIAN_POINT('',(0.282608479599,3.320610009873E-02,1.2500001)+ );+#4538 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.2500001)+ );+#4539 = VECTOR('',#4540,1.);+#4540 = DIRECTION('',(0.,0.,1.));+#4541 = DEFINITIONAL_REPRESENTATION('',(#4542),#4548);+#4542 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4543,#4544,#4545,#4546,#4547),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4543 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4544 = CARTESIAN_POINT('',(0.750172044941,-5.00001E-02));+#4545 = CARTESIAN_POINT('',(0.500194881383,-5.00001E-02));+#4546 = CARTESIAN_POINT('',(0.250120080197,-5.00001E-02));+#4547 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4549 = ORIENTED_EDGE('',*,*,#4550,.F.);+#4550 = EDGE_CURVE('',#4551,#4515,#4553,.T.);+#4551 = VERTEX_POINT('',#4552);+#4552 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.2));+#4553 = SURFACE_CURVE('',#4554,(#4560,#4569),.PCURVE_S1.);+#4554 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4555,#4556,#4557,#4558,#4559),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4555 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.2));+#4556 = CARTESIAN_POINT('',(0.277756677963,-3.518367172136E-02,1.2));+#4557 = CARTESIAN_POINT('',(0.28099265145,-2.495566551928E-02,1.2));+#4558 = CARTESIAN_POINT('',(0.282608479599,-1.22735467092E-02,1.2));+#4559 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.2));+#4560 = PCURVE('',#2438,#4561);+#4561 = DEFINITIONAL_REPRESENTATION('',(#4562),#4568);+#4562 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4563,#4564,#4565,#4566,#4567),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4563 = CARTESIAN_POINT('',(1.667511712652,0.226765345973));+#4564 = CARTESIAN_POINT('',(1.662641314118,0.234526876625));+#4565 = CARTESIAN_POINT('',(1.654852326449,0.241903549748));+#4566 = CARTESIAN_POINT('',(1.644148133611,0.248894064308));+#4567 = CARTESIAN_POINT('',(1.630539306338,0.255498089263));+#4568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4569 = PCURVE('',#4570,#4577);+#4570 = SURFACE_OF_LINEAR_EXTRUSION('',#4571,#4575);+#4571 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4572,#4573,#4574),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4572 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.2500001)+ );+#4573 = CARTESIAN_POINT('',(0.282608479599,-2.742078910301E-02,1.2500001+ ));+#4574 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.2500001+ ));+#4575 = VECTOR('',#4576,1.);+#4576 = DIRECTION('',(0.,0.,1.));+#4577 = DEFINITIONAL_REPRESENTATION('',(#4578),#4584);+#4578 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4579,#4580,#4581,#4582,#4583),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4579 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4580 = CARTESIAN_POINT('',(0.749880923604,-5.00001E-02));+#4581 = CARTESIAN_POINT('',(0.49980671609,-5.00001E-02));+#4582 = CARTESIAN_POINT('',(0.249829344256,-5.00001E-02));+#4583 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4585 = ORIENTED_EDGE('',*,*,#4586,.F.);+#4586 = EDGE_CURVE('',#4587,#4551,#4589,.T.);+#4587 = VERTEX_POINT('',#4588);+#4588 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.2));+#4589 = SURFACE_CURVE('',#4590,(#4596,#4605),.PCURVE_S1.);+#4590 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4591,#4592,#4593,#4594,#4595),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4591 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.2));+#4592 = CARTESIAN_POINT('',(0.253720300814,-5.848711664167E-02,1.2));+#4593 = CARTESIAN_POINT('',(0.261653350728,-5.589893907015E-02,1.2));+#4594 = CARTESIAN_POINT('',(0.268046553664,-5.071987059879E-02,1.2));+#4595 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.2));+#4596 = PCURVE('',#2438,#4597);+#4597 = DEFINITIONAL_REPRESENTATION('',(#4598),#4604);+#4598 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4599,#4600,#4601,#4602,#4603),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4599 = CARTESIAN_POINT('',(1.668978552298,0.194209195955));+#4600 = CARTESIAN_POINT('',(1.673112666923,0.202728311531));+#4601 = CARTESIAN_POINT('',(1.674247622856,0.210995343593));+#4602 = CARTESIAN_POINT('',(1.672379376198,0.219008173832));+#4603 = CARTESIAN_POINT('',(1.667511712652,0.226765345973));+#4604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4605 = PCURVE('',#4606,#4613);+#4606 = SURFACE_OF_LINEAR_EXTRUSION('',#4607,#4611);+#4607 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4608,#4609,#4610),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4608 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.2500001+ ));+#4609 = CARTESIAN_POINT('',(0.263192024888,-5.848711664167E-02,1.2500001+ ));+#4610 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.2500001+ ));+#4611 = VECTOR('',#4612,1.);+#4612 = DIRECTION('',(0.,0.,1.));+#4613 = DEFINITIONAL_REPRESENTATION('',(#4614),#4620);+#4614 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4615,#4616,#4617,#4618,#4619),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4615 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4616 = CARTESIAN_POINT('',(0.750032976816,-5.00001E-02));+#4617 = CARTESIAN_POINT('',(0.500007737294,-5.00001E-02));+#4618 = CARTESIAN_POINT('',(0.249978621283,-5.00001E-02));+#4619 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4621 = ORIENTED_EDGE('',*,*,#4622,.F.);+#4622 = EDGE_CURVE('',#4623,#4587,#4625,.T.);+#4623 = VERTEX_POINT('',#4624);+#4624 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.2));+#4625 = SURFACE_CURVE('',#4626,(#4632,#4641),.PCURVE_S1.);+#4626 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4627,#4628,#4629,#4630,#4631),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4627 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.2));+#4628 = CARTESIAN_POINT('',(0.220475413643,-5.071987465608E-02,1.2));+#4629 = CARTESIAN_POINT('',(0.226855408707,-5.589894430797E-02,1.2));+#4630 = CARTESIAN_POINT('',(0.234781859139,-5.848711664167E-02,1.2));+#4631 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.2));+#4632 = PCURVE('',#2438,#4633);+#4633 = DEFINITIONAL_REPRESENTATION('',(#4634),#4640);+#4634 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4635,#4636,#4637,#4638,#4639),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4635 = CARTESIAN_POINT('',(1.642513454393,0.175251764315));+#4636 = CARTESIAN_POINT('',(1.651610570077,0.176210159214));+#4637 = CARTESIAN_POINT('',(1.659055394674,0.179688907006));+#4638 = CARTESIAN_POINT('',(1.664844441854,0.185690088993));+#4639 = CARTESIAN_POINT('',(1.668978552298,0.194209195955));+#4640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4641 = PCURVE('',#4642,#4649);+#4642 = SURFACE_OF_LINEAR_EXTRUSION('',#4643,#4647);+#4643 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4644,#4645,#4646),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4644 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.2500001+ ));+#4645 = CARTESIAN_POINT('',(0.225310125491,-5.848711664167E-02,1.2500001+ ));+#4646 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.2500001+ ));+#4647 = VECTOR('',#4648,1.);+#4648 = DIRECTION('',(0.,0.,1.));+#4649 = DEFINITIONAL_REPRESENTATION('',(#4650),#4656);+#4650 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4651,#4652,#4653,#4654,#4655),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4651 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4652 = CARTESIAN_POINT('',(0.750021248116,-5.00001E-02));+#4653 = CARTESIAN_POINT('',(0.499992006929,-5.00001E-02));+#4654 = CARTESIAN_POINT('',(0.249966770431,-5.00001E-02));+#4655 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4657 = ORIENTED_EDGE('',*,*,#4658,.F.);+#4658 = EDGE_CURVE('',#4659,#4623,#4661,.T.);+#4659 = VERTEX_POINT('',#4660);+#4660 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.2));+#4661 = SURFACE_CURVE('',#4662,(#4668,#4677),.PCURVE_S1.);+#4662 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4663,#4664,#4665,#4666,#4667),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4663 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.2));+#4664 = CARTESIAN_POINT('',(0.205972921615,-1.227353898611E-02,1.2));+#4665 = CARTESIAN_POINT('',(0.207582152905,-2.49556525528E-02,1.2));+#4666 = CARTESIAN_POINT('',(0.210804915033,-3.518366377487E-02,1.2));+#4667 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.2));+#4668 = PCURVE('',#2438,#4669);+#4669 = DEFINITIONAL_REPRESENTATION('',(#4670),#4676);+#4670 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4671,#4672,#4673,#4674,#4675),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4671 = CARTESIAN_POINT('',(1.597081429886,0.186551883776));+#4672 = CARTESIAN_POINT('',(1.610690250212,0.179947862193));+#4673 = CARTESIAN_POINT('',(1.62280244844,0.175858817814));+#4674 = CARTESIAN_POINT('',(1.633411222773,0.174292830444));+#4675 = CARTESIAN_POINT('',(1.642513454393,0.175251764315));+#4676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4677 = PCURVE('',#4678,#4685);+#4678 = SURFACE_OF_LINEAR_EXTRUSION('',#4679,#4683);+#4679 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4680,#4681,#4682),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4680 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.2500001+ ));+#4681 = CARTESIAN_POINT('',(0.205972921615,-2.742078910301E-02,1.2500001+ ));+#4682 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.2500001)+ );+#4683 = VECTOR('',#4684,1.);+#4684 = DIRECTION('',(0.,0.,1.));+#4685 = DEFINITIONAL_REPRESENTATION('',(#4686),#4692);+#4686 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4687,#4688,#4689,#4690,#4691),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4687 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4688 = CARTESIAN_POINT('',(0.750170783298,-5.00001E-02));+#4689 = CARTESIAN_POINT('',(0.500193539408,-5.00001E-02));+#4690 = CARTESIAN_POINT('',(0.250119332187,-5.00001E-02));+#4691 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4693 = ORIENTED_EDGE('',*,*,#4694,.F.);+#4694 = EDGE_CURVE('',#4695,#4659,#4697,.T.);+#4695 = VERTEX_POINT('',#4696);+#4696 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.2));+#4697 = SURFACE_CURVE('',#4698,(#4704,#4713),.PCURVE_S1.);+#4698 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4699,#4700,#4701,#4702,#4703),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4699 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.2));+#4700 = CARTESIAN_POINT('',(0.210804895621,4.096894358414E-02,1.2));+#4701 = CARTESIAN_POINT('',(0.207582134984,3.072767294699E-02,1.2));+#4702 = CARTESIAN_POINT('',(0.205972921615,1.801911315597E-02,1.2));+#4703 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.2));+#4704 = PCURVE('',#2438,#4705);+#4705 = DEFINITIONAL_REPRESENTATION('',(#4706),#4712);+#4706 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4707,#4708,#4709,#4710,#4711),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4707 = CARTESIAN_POINT('',(1.560020424665,0.215283577193));+#4708 = CARTESIAN_POINT('',(1.564899501806,0.207539840801));+#4709 = CARTESIAN_POINT('',(1.572706191525,0.200169263753));+#4710 = CARTESIAN_POINT('',(1.583437060253,0.193173156553));+#4711 = CARTESIAN_POINT('',(1.597081429886,0.186551883776));+#4712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4713 = PCURVE('',#4714,#4721);+#4714 = SURFACE_OF_LINEAR_EXTRUSION('',#4715,#4719);+#4715 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4716,#4717,#4718),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4716 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.2500001)+ );+#4717 = CARTESIAN_POINT('',(0.205972921615,3.320610009873E-02,1.2500001)+ );+#4718 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.2500001)+ );+#4719 = VECTOR('',#4720,1.);+#4720 = DIRECTION('',(0.,0.,1.));+#4721 = DEFINITIONAL_REPRESENTATION('',(#4722),#4728);+#4722 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4723,#4724,#4725,#4726,#4727),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4723 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4724 = CARTESIAN_POINT('',(0.749879663946,-5.00001E-02));+#4725 = CARTESIAN_POINT('',(0.499804863173,-5.00001E-02));+#4726 = CARTESIAN_POINT('',(0.249827827409,-5.00001E-02));+#4727 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4729 = ORIENTED_EDGE('',*,*,#4730,.F.);+#4730 = EDGE_CURVE('',#4479,#4695,#4731,.T.);+#4731 = SURFACE_CURVE('',#4732,(#4741,#4753),.PCURVE_S1.);+#4732 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4733,#4734,#4735,#4736,#4737,+ #4738,#4739,#4740),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#4733 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.2));+#4734 = CARTESIAN_POINT('',(0.239147131265,6.427242763739E-02,1.2));+#4735 = CARTESIAN_POINT('',(0.234491399771,6.352049847403E-02,1.2));+#4736 = CARTESIAN_POINT('',(0.23028445804,6.201621349668E-02,1.2));+#4737 = CARTESIAN_POINT('',(0.223312494995,5.782979413139E-02,1.2));+#4738 = CARTESIAN_POINT('',(0.220426907319,5.534963279337E-02,1.2));+#4739 = CARTESIAN_POINT('',(0.217869928333,5.231932400602E-02,1.2));+#4740 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.2));+#4741 = PCURVE('',#2438,#4742);+#4742 = DEFINITIONAL_REPRESENTATION('',(#4743),#4752);+#4743 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4744,#4745,#4746,#4747,#4748,+ #4749,#4750,#4751),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#4744 = CARTESIAN_POINT('',(1.558536285185,0.247804077674));+#4745 = CARTESIAN_POINT('',(1.556307983732,0.243212246208));+#4746 = CARTESIAN_POINT('',(1.554951847896,0.238695374636));+#4747 = CARTESIAN_POINT('',(1.554468513573,0.234253796092));+#4748 = CARTESIAN_POINT('',(1.555191032637,0.226153651526));+#4749 = CARTESIAN_POINT('',(1.556162540893,0.22247479461));+#4750 = CARTESIAN_POINT('',(1.557772462039,0.218851389197));+#4751 = CARTESIAN_POINT('',(1.560020424665,0.215283577193));+#4752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4753 = PCURVE('',#4754,#4761);+#4754 = SURFACE_OF_LINEAR_EXTRUSION('',#4755,#4759);+#4755 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4756,#4757,#4758),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4756 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.2500001)+ );+#4757 = CARTESIAN_POINT('',(0.225310125491,6.427242763739E-02,1.2500001)+ );+#4758 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.2500001)+ );+#4759 = VECTOR('',#4760,1.);+#4760 = DIRECTION('',(0.,0.,1.));+#4761 = DEFINITIONAL_REPRESENTATION('',(#4762),#4771);+#4762 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4763,#4764,#4765,#4766,#4767,+ #4768,#4769,#4770),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#4763 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4764 = CARTESIAN_POINT('',(0.865266947925,-5.00001E-02));+#4765 = CARTESIAN_POINT('',(0.730516915609,-5.00001E-02));+#4766 = CARTESIAN_POINT('',(0.595758420251,-5.00001E-02));+#4767 = CARTESIAN_POINT('',(0.345744581319,-5.00001E-02));+#4768 = CARTESIAN_POINT('',(0.230489216146,-5.00001E-02));+#4769 = CARTESIAN_POINT('',(0.115239245241,-5.00001E-02));+#4770 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4772 = FACE_BOUND('',#4773,.T.);+#4773 = EDGE_LOOP('',(#4774,#4812,#4848,#4884,#4920,#4956,#4992,#5028));+#4774 = ORIENTED_EDGE('',*,*,#4775,.F.);+#4775 = EDGE_CURVE('',#4776,#4778,#4780,.T.);+#4776 = VERTEX_POINT('',#4777);+#4777 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.2));+#4778 = VERTEX_POINT('',#4779);+#4779 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.2));+#4780 = SURFACE_CURVE('',#4781,(#4787,#4796),.PCURVE_S1.);+#4781 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4782,#4783,#4784,#4785,#4786),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4782 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.2));+#4783 = CARTESIAN_POINT('',(0.365762833907,5.650518159429E-02,1.2));+#4784 = CARTESIAN_POINT('',(0.359369630969,6.168425006622E-02,1.2));+#4785 = CARTESIAN_POINT('',(0.351436581057,6.427242763739E-02,1.2));+#4786 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.2));+#4787 = PCURVE('',#2438,#4788);+#4788 = DEFINITIONAL_REPRESENTATION('',(#4789),#4795);+#4789 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4790,#4791,#4792,#4793,#4794),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4790 = CARTESIAN_POINT('',(1.627680070373,0.354708918278));+#4791 = CARTESIAN_POINT('',(1.618574310265,0.353732700635));+#4792 = CARTESIAN_POINT('',(1.611123720381,0.350242069687));+#4793 = CARTESIAN_POINT('',(1.60533178726,0.344234952677));+#4794 = CARTESIAN_POINT('',(1.601197672635,0.3357158371));+#4795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4796 = PCURVE('',#4797,#4804);+#4797 = SURFACE_OF_LINEAR_EXTRUSION('',#4798,#4802);+#4798 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4799,#4800,#4801),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4799 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.2500001)+ );+#4800 = CARTESIAN_POINT('',(0.36090830513,6.427242763739E-02,1.2500001)+ );+#4801 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.2500001)+ );+#4802 = VECTOR('',#4803,1.);+#4803 = DIRECTION('',(0.,0.,1.));+#4804 = DEFINITIONAL_REPRESENTATION('',(#4805),#4811);+#4805 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4806,#4807,#4808,#4809,#4810),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4806 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4807 = CARTESIAN_POINT('',(0.750021378724,-5.00001E-02));+#4808 = CARTESIAN_POINT('',(0.499992262675,-5.00001E-02));+#4809 = CARTESIAN_POINT('',(0.249967023196,-5.00001E-02));+#4810 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4812 = ORIENTED_EDGE('',*,*,#4813,.F.);+#4813 = EDGE_CURVE('',#4814,#4776,#4816,.T.);+#4814 = VERTEX_POINT('',#4815);+#4815 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.2));+#4816 = SURFACE_CURVE('',#4817,(#4823,#4832),.PCURVE_S1.);+#4817 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4818,#4819,#4820,#4821,#4822),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4818 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.2));+#4819 = CARTESIAN_POINT('',(0.380324759842,1.801912090511E-02,1.2));+#4820 = CARTESIAN_POINT('',(0.378708949687,3.072768593738E-02,1.2));+#4821 = CARTESIAN_POINT('',(0.375472977696,4.096895153265E-02,1.2));+#4822 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.2));+#4823 = PCURVE('',#2438,#4824);+#4824 = DEFINITIONAL_REPRESENTATION('',(#4825),#4831);+#4825 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4826,#4827,#4828,#4829,#4830),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4826 = CARTESIAN_POINT('',(1.673200693788,0.343409848688));+#4827 = CARTESIAN_POINT('',(1.659556317183,0.350031124848));+#4828 = CARTESIAN_POINT('',(1.647417449311,0.354125798757));+#4829 = CARTESIAN_POINT('',(1.636790983285,0.355685688347));+#4830 = CARTESIAN_POINT('',(1.627680070373,0.354708918278));+#4831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4832 = PCURVE('',#4833,#4840);+#4833 = SURFACE_OF_LINEAR_EXTRUSION('',#4834,#4838);+#4834 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4835,#4836,#4837),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4835 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.2500001)+ );+#4836 = CARTESIAN_POINT('',(0.380324759842,3.320610009873E-02,1.2500001)+ );+#4837 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.2500001)+ );+#4838 = VECTOR('',#4839,1.);+#4839 = DIRECTION('',(0.,0.,1.));+#4840 = DEFINITIONAL_REPRESENTATION('',(#4841),#4847);+#4841 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4842,#4843,#4844,#4845,#4846),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4842 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4843 = CARTESIAN_POINT('',(0.750172044941,-5.00001E-02));+#4844 = CARTESIAN_POINT('',(0.500194881383,-5.00001E-02));+#4845 = CARTESIAN_POINT('',(0.250120080197,-5.00001E-02));+#4846 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4848 = ORIENTED_EDGE('',*,*,#4849,.F.);+#4849 = EDGE_CURVE('',#4850,#4814,#4852,.T.);+#4850 = VERTEX_POINT('',#4851);+#4851 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.2));+#4852 = SURFACE_CURVE('',#4853,(#4859,#4868),.PCURVE_S1.);+#4853 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4854,#4855,#4856,#4857,#4858),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4854 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.2));+#4855 = CARTESIAN_POINT('',(0.375472958206,-3.518367172136E-02,1.2));+#4856 = CARTESIAN_POINT('',(0.378708931693,-2.495566551928E-02,1.2));+#4857 = CARTESIAN_POINT('',(0.380324759842,-1.22735467092E-02,1.2));+#4858 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.2));+#4859 = PCURVE('',#2438,#4860);+#4860 = DEFINITIONAL_REPRESENTATION('',(#4861),#4867);+#4861 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4862,#4863,#4864,#4865,#4866),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4862 = CARTESIAN_POINT('',(1.710173100102,0.314677105399));+#4863 = CARTESIAN_POINT('',(1.705302701568,0.322438636051));+#4864 = CARTESIAN_POINT('',(1.697513713899,0.329815309174));+#4865 = CARTESIAN_POINT('',(1.686809521061,0.336805823734));+#4866 = CARTESIAN_POINT('',(1.673200693788,0.343409848688));+#4867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4868 = PCURVE('',#4869,#4876);+#4869 = SURFACE_OF_LINEAR_EXTRUSION('',#4870,#4874);+#4870 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4871,#4872,#4873),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4871 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.2500001)+ );+#4872 = CARTESIAN_POINT('',(0.380324759842,-2.742078910301E-02,1.2500001+ ));+#4873 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.2500001+ ));+#4874 = VECTOR('',#4875,1.);+#4875 = DIRECTION('',(0.,0.,1.));+#4876 = DEFINITIONAL_REPRESENTATION('',(#4877),#4883);+#4877 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4878,#4879,#4880,#4881,#4882),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4878 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4879 = CARTESIAN_POINT('',(0.749880923604,-5.00001E-02));+#4880 = CARTESIAN_POINT('',(0.49980671609,-5.00001E-02));+#4881 = CARTESIAN_POINT('',(0.249829344256,-5.00001E-02));+#4882 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4884 = ORIENTED_EDGE('',*,*,#4885,.F.);+#4885 = EDGE_CURVE('',#4886,#4850,#4888,.T.);+#4886 = VERTEX_POINT('',#4887);+#4887 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.2));+#4888 = SURFACE_CURVE('',#4889,(#4895,#4904),.PCURVE_S1.);+#4889 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4890,#4891,#4892,#4893,#4894),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4890 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.2));+#4891 = CARTESIAN_POINT('',(0.351436581057,-5.848711664167E-02,1.2));+#4892 = CARTESIAN_POINT('',(0.35936963097,-5.589893907015E-02,1.2));+#4893 = CARTESIAN_POINT('',(0.365762833907,-5.071987059879E-02,1.2));+#4894 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.2));+#4895 = PCURVE('',#2438,#4896);+#4896 = DEFINITIONAL_REPRESENTATION('',(#4897),#4903);+#4897 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4898,#4899,#4900,#4901,#4902),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4898 = CARTESIAN_POINT('',(1.711639939748,0.282120955381));+#4899 = CARTESIAN_POINT('',(1.715774054373,0.290640070957));+#4900 = CARTESIAN_POINT('',(1.716909010306,0.298907103018));+#4901 = CARTESIAN_POINT('',(1.715040763648,0.306919933258));+#4902 = CARTESIAN_POINT('',(1.710173100102,0.314677105399));+#4903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4904 = PCURVE('',#4905,#4912);+#4905 = SURFACE_OF_LINEAR_EXTRUSION('',#4906,#4910);+#4906 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4907,#4908,#4909),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4907 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.2500001+ ));+#4908 = CARTESIAN_POINT('',(0.36090830513,-5.848711664167E-02,1.2500001)+ );+#4909 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.2500001+ ));+#4910 = VECTOR('',#4911,1.);+#4911 = DIRECTION('',(0.,0.,1.));+#4912 = DEFINITIONAL_REPRESENTATION('',(#4913),#4919);+#4913 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4914,#4915,#4916,#4917,#4918),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4914 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4915 = CARTESIAN_POINT('',(0.750032976816,-5.00001E-02));+#4916 = CARTESIAN_POINT('',(0.500007737294,-5.00001E-02));+#4917 = CARTESIAN_POINT('',(0.249978621283,-5.00001E-02));+#4918 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4920 = ORIENTED_EDGE('',*,*,#4921,.F.);+#4921 = EDGE_CURVE('',#4922,#4886,#4924,.T.);+#4922 = VERTEX_POINT('',#4923);+#4923 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.2));+#4924 = SURFACE_CURVE('',#4925,(#4931,#4940),.PCURVE_S1.);+#4925 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4926,#4927,#4928,#4929,#4930),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4926 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.2));+#4927 = CARTESIAN_POINT('',(0.318191693886,-5.071987465608E-02,1.2));+#4928 = CARTESIAN_POINT('',(0.32457168895,-5.589894430797E-02,1.2));+#4929 = CARTESIAN_POINT('',(0.332498139382,-5.848711664167E-02,1.2));+#4930 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.2));+#4931 = PCURVE('',#2438,#4932);+#4932 = DEFINITIONAL_REPRESENTATION('',(#4933),#4939);+#4933 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4934,#4935,#4936,#4937,#4938),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4934 = CARTESIAN_POINT('',(1.685174841843,0.26316352374));+#4935 = CARTESIAN_POINT('',(1.694271957527,0.264121918639));+#4936 = CARTESIAN_POINT('',(1.701716782124,0.267600666432));+#4937 = CARTESIAN_POINT('',(1.707505829304,0.273601848418));+#4938 = CARTESIAN_POINT('',(1.711639939748,0.282120955381));+#4939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4940 = PCURVE('',#4941,#4948);+#4941 = SURFACE_OF_LINEAR_EXTRUSION('',#4942,#4946);+#4942 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4943,#4944,#4945),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4943 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.2500001+ ));+#4944 = CARTESIAN_POINT('',(0.323026405734,-5.848711664167E-02,1.2500001+ ));+#4945 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.2500001+ ));+#4946 = VECTOR('',#4947,1.);+#4947 = DIRECTION('',(0.,0.,1.));+#4948 = DEFINITIONAL_REPRESENTATION('',(#4949),#4955);+#4949 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4950,#4951,#4952,#4953,#4954),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4950 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4951 = CARTESIAN_POINT('',(0.750021248116,-5.00001E-02));+#4952 = CARTESIAN_POINT('',(0.499992006929,-5.00001E-02));+#4953 = CARTESIAN_POINT('',(0.249966770431,-5.00001E-02));+#4954 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4956 = ORIENTED_EDGE('',*,*,#4957,.F.);+#4957 = EDGE_CURVE('',#4958,#4922,#4960,.T.);+#4958 = VERTEX_POINT('',#4959);+#4959 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.2));+#4960 = SURFACE_CURVE('',#4961,(#4967,#4976),.PCURVE_S1.);+#4961 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4962,#4963,#4964,#4965,#4966),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4962 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.2));+#4963 = CARTESIAN_POINT('',(0.303689201858,-1.227353898611E-02,1.2));+#4964 = CARTESIAN_POINT('',(0.305298433147,-2.49556525528E-02,1.2));+#4965 = CARTESIAN_POINT('',(0.308521195276,-3.518366377487E-02,1.2));+#4966 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.2));+#4967 = PCURVE('',#2438,#4968);+#4968 = DEFINITIONAL_REPRESENTATION('',(#4969),#4975);+#4969 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4970,#4971,#4972,#4973,#4974),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4970 = CARTESIAN_POINT('',(1.639742817337,0.274463643202));+#4971 = CARTESIAN_POINT('',(1.653351637662,0.267859621619));+#4972 = CARTESIAN_POINT('',(1.66546383589,0.263770577239));+#4973 = CARTESIAN_POINT('',(1.676072610223,0.26220458987));+#4974 = CARTESIAN_POINT('',(1.685174841843,0.26316352374));+#4975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4976 = PCURVE('',#4977,#4984);+#4977 = SURFACE_OF_LINEAR_EXTRUSION('',#4978,#4982);+#4978 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4979,#4980,#4981),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4979 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.2500001+ ));+#4980 = CARTESIAN_POINT('',(0.303689201858,-2.742078910301E-02,1.2500001+ ));+#4981 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.2500001)+ );+#4982 = VECTOR('',#4983,1.);+#4983 = DIRECTION('',(0.,0.,1.));+#4984 = DEFINITIONAL_REPRESENTATION('',(#4985),#4991);+#4985 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4986,#4987,#4988,#4989,#4990),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4986 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4987 = CARTESIAN_POINT('',(0.750170783298,-5.00001E-02));+#4988 = CARTESIAN_POINT('',(0.500193539408,-5.00001E-02));+#4989 = CARTESIAN_POINT('',(0.250119332187,-5.00001E-02));+#4990 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4992 = ORIENTED_EDGE('',*,*,#4993,.F.);+#4993 = EDGE_CURVE('',#4994,#4958,#4996,.T.);+#4994 = VERTEX_POINT('',#4995);+#4995 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.2));+#4996 = SURFACE_CURVE('',#4997,(#5003,#5012),.PCURVE_S1.);+#4997 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4998,#4999,#5000,#5001,#5002),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4998 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.2));+#4999 = CARTESIAN_POINT('',(0.308521175864,4.096894358414E-02,1.2));+#5000 = CARTESIAN_POINT('',(0.305298415227,3.072767294699E-02,1.2));+#5001 = CARTESIAN_POINT('',(0.303689201858,1.801911315597E-02,1.2));+#5002 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.2));+#5003 = PCURVE('',#2438,#5004);+#5004 = DEFINITIONAL_REPRESENTATION('',(#5005),#5011);+#5005 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5006,#5007,#5008,#5009,#5010),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5006 = CARTESIAN_POINT('',(1.602681812115,0.303195336619));+#5007 = CARTESIAN_POINT('',(1.607560889256,0.295451600227));+#5008 = CARTESIAN_POINT('',(1.615367578975,0.288081023179));+#5009 = CARTESIAN_POINT('',(1.626098447703,0.281084915979));+#5010 = CARTESIAN_POINT('',(1.639742817337,0.274463643202));+#5011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5012 = PCURVE('',#5013,#5020);+#5013 = SURFACE_OF_LINEAR_EXTRUSION('',#5014,#5018);+#5014 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5015,#5016,#5017),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5015 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.2500001)+ );+#5016 = CARTESIAN_POINT('',(0.303689201858,3.320610009873E-02,1.2500001)+ );+#5017 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.2500001)+ );+#5018 = VECTOR('',#5019,1.);+#5019 = DIRECTION('',(0.,0.,1.));+#5020 = DEFINITIONAL_REPRESENTATION('',(#5021),#5027);+#5021 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5022,#5023,#5024,#5025,#5026),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5022 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5023 = CARTESIAN_POINT('',(0.749879663946,-5.00001E-02));+#5024 = CARTESIAN_POINT('',(0.499804863173,-5.00001E-02));+#5025 = CARTESIAN_POINT('',(0.249827827409,-5.00001E-02));+#5026 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5028 = ORIENTED_EDGE('',*,*,#5029,.F.);+#5029 = EDGE_CURVE('',#4778,#4994,#5030,.T.);+#5030 = SURFACE_CURVE('',#5031,(#5040,#5052),.PCURVE_S1.);+#5031 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5032,#5033,#5034,#5035,#5036,+ #5037,#5038,#5039),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#5032 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.2));+#5033 = CARTESIAN_POINT('',(0.336863411508,6.427242763739E-02,1.2));+#5034 = CARTESIAN_POINT('',(0.332207680014,6.352049847403E-02,1.2));+#5035 = CARTESIAN_POINT('',(0.328000738282,6.201621349668E-02,1.2));+#5036 = CARTESIAN_POINT('',(0.321028775238,5.782979413139E-02,1.2));+#5037 = CARTESIAN_POINT('',(0.318143187562,5.534963279337E-02,1.2));+#5038 = CARTESIAN_POINT('',(0.315586208575,5.231932400602E-02,1.2));+#5039 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.2));+#5040 = PCURVE('',#2438,#5041);+#5041 = DEFINITIONAL_REPRESENTATION('',(#5042),#5051);+#5042 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5043,#5044,#5045,#5046,#5047,+ #5048,#5049,#5050),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#5043 = CARTESIAN_POINT('',(1.601197672635,0.3357158371));+#5044 = CARTESIAN_POINT('',(1.598969371182,0.331124005634));+#5045 = CARTESIAN_POINT('',(1.597613235346,0.326607134061));+#5046 = CARTESIAN_POINT('',(1.597129901023,0.322165555518));+#5047 = CARTESIAN_POINT('',(1.597852420087,0.314065410951));+#5048 = CARTESIAN_POINT('',(1.598823928343,0.310386554035));+#5049 = CARTESIAN_POINT('',(1.600433849489,0.306763148622));+#5050 = CARTESIAN_POINT('',(1.602681812115,0.303195336619));+#5051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5052 = PCURVE('',#5053,#5060);+#5053 = SURFACE_OF_LINEAR_EXTRUSION('',#5054,#5058);+#5054 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5055,#5056,#5057),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5055 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.2500001)+ );+#5056 = CARTESIAN_POINT('',(0.323026405734,6.427242763739E-02,1.2500001)+ );+#5057 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.2500001)+ );+#5058 = VECTOR('',#5059,1.);+#5059 = DIRECTION('',(0.,0.,1.));+#5060 = DEFINITIONAL_REPRESENTATION('',(#5061),#5070);+#5061 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5062,#5063,#5064,#5065,#5066,+ #5067,#5068,#5069),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.539003844055,+ 1.),.UNSPECIFIED.);+#5062 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5063 = CARTESIAN_POINT('',(0.865266947925,-5.00001E-02));+#5064 = CARTESIAN_POINT('',(0.730516915609,-5.00001E-02));+#5065 = CARTESIAN_POINT('',(0.595758420251,-5.00001E-02));+#5066 = CARTESIAN_POINT('',(0.345744581319,-5.00001E-02));+#5067 = CARTESIAN_POINT('',(0.230489216146,-5.00001E-02));+#5068 = CARTESIAN_POINT('',(0.115239245241,-5.00001E-02));+#5069 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5071 = ADVANCED_FACE('',(#5072),#5053,.T.);+#5072 = FACE_BOUND('',#5073,.T.);+#5073 = EDGE_LOOP('',(#5074,#5075,#5098,#5126));+#5074 = ORIENTED_EDGE('',*,*,#5029,.T.);+#5075 = ORIENTED_EDGE('',*,*,#5076,.T.);+#5076 = EDGE_CURVE('',#4994,#5077,#5079,.T.);+#5077 = VERTEX_POINT('',#5078);+#5078 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.1500001)+ );+#5079 = SURFACE_CURVE('',#5080,(#5084,#5091),.PCURVE_S1.);+#5080 = LINE('',#5081,#5082);+#5081 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.2500001)+ );+#5082 = VECTOR('',#5083,1.);+#5083 = DIRECTION('',(-0.,-0.,-1.));+#5084 = PCURVE('',#5053,#5085);+#5085 = DEFINITIONAL_REPRESENTATION('',(#5086),#5090);+#5086 = LINE('',#5087,#5088);+#5087 = CARTESIAN_POINT('',(0.,0.));+#5088 = VECTOR('',#5089,1.);+#5089 = DIRECTION('',(0.,-1.));+#5090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5091 = PCURVE('',#5013,#5092);+#5092 = DEFINITIONAL_REPRESENTATION('',(#5093),#5097);+#5093 = LINE('',#5094,#5095);+#5094 = CARTESIAN_POINT('',(1.,0.));+#5095 = VECTOR('',#5096,1.);+#5096 = DIRECTION('',(0.,-1.));+#5097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5098 = ORIENTED_EDGE('',*,*,#5099,.T.);+#5099 = EDGE_CURVE('',#5077,#5100,#5102,.T.);+#5100 = VERTEX_POINT('',#5101);+#5101 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.1500001)+ );+#5102 = SURFACE_CURVE('',#5103,(#5107,#5114),.PCURVE_S1.);+#5103 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5104,#5105,#5106),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5104 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.1500001)+ );+#5105 = CARTESIAN_POINT('',(0.323026405734,6.427242763739E-02,1.1500001)+ );+#5106 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.1500001)+ );+#5107 = PCURVE('',#5053,#5108);+#5108 = DEFINITIONAL_REPRESENTATION('',(#5109),#5113);+#5109 = LINE('',#5110,#5111);+#5110 = CARTESIAN_POINT('',(0.,-0.1));+#5111 = VECTOR('',#5112,1.);+#5112 = DIRECTION('',(1.,0.));+#5113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5114 = PCURVE('',#5115,#5120);+#5115 = PLANE('',#5116);+#5116 = AXIS2_PLACEMENT_3D('',#5117,#5118,#5119);+#5117 = CARTESIAN_POINT('',(0.293148840728,-5.618884241049E-02,1.1500001+ ));+#5118 = DIRECTION('',(0.,0.,1.));+#5119 = DIRECTION('',(1.,0.,0.));+#5120 = DEFINITIONAL_REPRESENTATION('',(#5121),#5125);+#5121 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5122,#5123,#5124),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5122 = CARTESIAN_POINT('',(2.020896306724E-02,0.104928106279));+#5123 = CARTESIAN_POINT('',(2.98775650053E-02,0.120461270048));+#5124 = CARTESIAN_POINT('',(4.881851470362E-02,0.120461270048));+#5125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5126 = ORIENTED_EDGE('',*,*,#5127,.F.);+#5127 = EDGE_CURVE('',#4778,#5100,#5128,.T.);+#5128 = SURFACE_CURVE('',#5129,(#5133,#5140),.PCURVE_S1.);+#5129 = LINE('',#5130,#5131);+#5130 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.2500001)+ );+#5131 = VECTOR('',#5132,1.);+#5132 = DIRECTION('',(-0.,-0.,-1.));+#5133 = PCURVE('',#5053,#5134);+#5134 = DEFINITIONAL_REPRESENTATION('',(#5135),#5139);+#5135 = LINE('',#5136,#5137);+#5136 = CARTESIAN_POINT('',(1.,0.));+#5137 = VECTOR('',#5138,1.);+#5138 = DIRECTION('',(0.,-1.));+#5139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5140 = PCURVE('',#4797,#5141);+#5141 = DEFINITIONAL_REPRESENTATION('',(#5142),#5146);+#5142 = LINE('',#5143,#5144);+#5143 = CARTESIAN_POINT('',(0.,0.));+#5144 = VECTOR('',#5145,1.);+#5145 = DIRECTION('',(0.,-1.));+#5146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5147 = ADVANCED_FACE('',(#5148,#5310),#5115,.T.);+#5148 = FACE_BOUND('',#5149,.F.);+#5149 = EDGE_LOOP('',(#5150,#5173,#5196,#5219,#5242,#5265,#5288,#5309));+#5150 = ORIENTED_EDGE('',*,*,#5151,.T.);+#5151 = EDGE_CURVE('',#5100,#5152,#5154,.T.);+#5152 = VERTEX_POINT('',#5153);+#5153 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.1500001)+ );+#5154 = SURFACE_CURVE('',#5155,(#5159,#5166),.PCURVE_S1.);+#5155 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5156,#5157,#5158),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5156 = CARTESIAN_POINT('',(0.341967355432,6.427242763739E-02,1.1500001)+ );+#5157 = CARTESIAN_POINT('',(0.36090830513,6.427242763739E-02,1.1500001)+ );+#5158 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.1500001)+ );+#5159 = PCURVE('',#5115,#5160);+#5160 = DEFINITIONAL_REPRESENTATION('',(#5161),#5165);+#5161 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5162,#5163,#5164),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5162 = CARTESIAN_POINT('',(4.881851470362E-02,0.120461270048));+#5163 = CARTESIAN_POINT('',(6.775946440194E-02,0.120461270048));+#5164 = CARTESIAN_POINT('',(7.746769175777E-02,0.104928106279));+#5165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5166 = PCURVE('',#4797,#5167);+#5167 = DEFINITIONAL_REPRESENTATION('',(#5168),#5172);+#5168 = LINE('',#5169,#5170);+#5169 = CARTESIAN_POINT('',(0.,-0.1));+#5170 = VECTOR('',#5171,1.);+#5171 = DIRECTION('',(1.,0.));+#5172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5173 = ORIENTED_EDGE('',*,*,#5174,.T.);+#5174 = EDGE_CURVE('',#5152,#5175,#5177,.T.);+#5175 = VERTEX_POINT('',#5176);+#5176 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.1500001)+ );+#5177 = SURFACE_CURVE('',#5178,(#5182,#5189),.PCURVE_S1.);+#5178 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5179,#5180,#5181),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5179 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.1500001)+ );+#5180 = CARTESIAN_POINT('',(0.380324759842,3.320610009873E-02,1.1500001)+ );+#5181 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.1500001)+ );+#5182 = PCURVE('',#5115,#5183);+#5183 = DEFINITIONAL_REPRESENTATION('',(#5184),#5188);+#5184 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5185,#5186,#5187),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5185 = CARTESIAN_POINT('',(7.746769175777E-02,0.104928106279));+#5186 = CARTESIAN_POINT('',(8.71759191136E-02,8.939494250922E-02));+#5187 = CARTESIAN_POINT('',(8.71759191136E-02,5.904187249058E-02));+#5188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5189 = PCURVE('',#4833,#5190);+#5190 = DEFINITIONAL_REPRESENTATION('',(#5191),#5195);+#5191 = LINE('',#5192,#5193);+#5192 = CARTESIAN_POINT('',(0.,-0.1));+#5193 = VECTOR('',#5194,1.);+#5194 = DIRECTION('',(1.,0.));+#5195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5196 = ORIENTED_EDGE('',*,*,#5197,.T.);+#5197 = EDGE_CURVE('',#5175,#5198,#5200,.T.);+#5198 = VERTEX_POINT('',#5199);+#5199 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.1500001+ ));+#5200 = SURFACE_CURVE('',#5201,(#5205,#5212),.PCURVE_S1.);+#5201 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5202,#5203,#5204),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5202 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.1500001)+ );+#5203 = CARTESIAN_POINT('',(0.380324759842,-2.742078910301E-02,1.1500001+ ));+#5204 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.1500001+ ));+#5205 = PCURVE('',#5115,#5206);+#5206 = DEFINITIONAL_REPRESENTATION('',(#5207),#5211);+#5207 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5208,#5209,#5210),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5208 = CARTESIAN_POINT('',(8.71759191136E-02,5.904187249058E-02));+#5209 = CARTESIAN_POINT('',(8.71759191136E-02,2.876805330749E-02));+#5210 = CARTESIAN_POINT('',(7.746769175777E-02,1.323488953816E-02));+#5211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5212 = PCURVE('',#4869,#5213);+#5213 = DEFINITIONAL_REPRESENTATION('',(#5214),#5218);+#5214 = LINE('',#5215,#5216);+#5215 = CARTESIAN_POINT('',(0.,-0.1));+#5216 = VECTOR('',#5217,1.);+#5217 = DIRECTION('',(1.,0.));+#5218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5219 = ORIENTED_EDGE('',*,*,#5220,.T.);+#5220 = EDGE_CURVE('',#5198,#5221,#5223,.T.);+#5221 = VERTEX_POINT('',#5222);+#5222 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.1500001+ ));+#5223 = SURFACE_CURVE('',#5224,(#5228,#5235),.PCURVE_S1.);+#5224 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5225,#5226,#5227),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5225 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.1500001+ ));+#5226 = CARTESIAN_POINT('',(0.36090830513,-5.848711664167E-02,1.1500001)+ );+#5227 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.1500001+ ));+#5228 = PCURVE('',#5115,#5229);+#5229 = DEFINITIONAL_REPRESENTATION('',(#5230),#5234);+#5230 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5231,#5232,#5233),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5231 = CARTESIAN_POINT('',(7.746769175777E-02,1.323488953816E-02));+#5232 = CARTESIAN_POINT('',(6.775946440194E-02,-2.298274231177E-03));+#5233 = CARTESIAN_POINT('',(4.881851470362E-02,-2.298274231177E-03));+#5234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5235 = PCURVE('',#4905,#5236);+#5236 = DEFINITIONAL_REPRESENTATION('',(#5237),#5241);+#5237 = LINE('',#5238,#5239);+#5238 = CARTESIAN_POINT('',(0.,-0.1));+#5239 = VECTOR('',#5240,1.);+#5240 = DIRECTION('',(1.,0.));+#5241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5242 = ORIENTED_EDGE('',*,*,#5243,.T.);+#5243 = EDGE_CURVE('',#5221,#5244,#5246,.T.);+#5244 = VERTEX_POINT('',#5245);+#5245 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.1500001+ ));+#5246 = SURFACE_CURVE('',#5247,(#5251,#5258),.PCURVE_S1.);+#5247 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5248,#5249,#5250),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5248 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.1500001+ ));+#5249 = CARTESIAN_POINT('',(0.323026405734,-5.848711664167E-02,1.1500001+ ));+#5250 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.1500001+ ));+#5251 = PCURVE('',#5115,#5252);+#5252 = DEFINITIONAL_REPRESENTATION('',(#5253),#5257);+#5253 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5254,#5255,#5256),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5254 = CARTESIAN_POINT('',(4.881851470362E-02,-2.298274231177E-03));+#5255 = CARTESIAN_POINT('',(2.98775650053E-02,-2.298274231177E-03));+#5256 = CARTESIAN_POINT('',(2.020896306724E-02,1.323488953816E-02));+#5257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5258 = PCURVE('',#4941,#5259);+#5259 = DEFINITIONAL_REPRESENTATION('',(#5260),#5264);+#5260 = LINE('',#5261,#5262);+#5261 = CARTESIAN_POINT('',(0.,-0.1));+#5262 = VECTOR('',#5263,1.);+#5263 = DIRECTION('',(1.,0.));+#5264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5265 = ORIENTED_EDGE('',*,*,#5266,.T.);+#5266 = EDGE_CURVE('',#5244,#5267,#5269,.T.);+#5267 = VERTEX_POINT('',#5268);+#5268 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.1500001)+ );+#5269 = SURFACE_CURVE('',#5270,(#5274,#5281),.PCURVE_S1.);+#5270 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5271,#5272,#5273),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5271 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.1500001+ ));+#5272 = CARTESIAN_POINT('',(0.303689201858,-2.742078910301E-02,1.1500001+ ));+#5273 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.1500001)+ );+#5274 = PCURVE('',#5115,#5275);+#5275 = DEFINITIONAL_REPRESENTATION('',(#5276),#5280);+#5276 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5277,#5278,#5279),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5277 = CARTESIAN_POINT('',(2.020896306724E-02,1.323488953816E-02));+#5278 = CARTESIAN_POINT('',(1.054036112919E-02,2.876805330749E-02));+#5279 = CARTESIAN_POINT('',(1.054036112919E-02,5.904187249058E-02));+#5280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5281 = PCURVE('',#4977,#5282);+#5282 = DEFINITIONAL_REPRESENTATION('',(#5283),#5287);+#5283 = LINE('',#5284,#5285);+#5284 = CARTESIAN_POINT('',(0.,-0.1));+#5285 = VECTOR('',#5286,1.);+#5286 = DIRECTION('',(1.,0.));+#5287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5288 = ORIENTED_EDGE('',*,*,#5289,.T.);+#5289 = EDGE_CURVE('',#5267,#5077,#5290,.T.);+#5290 = SURFACE_CURVE('',#5291,(#5295,#5302),.PCURVE_S1.);+#5291 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5292,#5293,#5294),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5292 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.1500001)+ );+#5293 = CARTESIAN_POINT('',(0.303689201858,3.320610009873E-02,1.1500001)+ );+#5294 = CARTESIAN_POINT('',(0.313357803796,4.873926386806E-02,1.1500001)+ );+#5295 = PCURVE('',#5115,#5296);+#5296 = DEFINITIONAL_REPRESENTATION('',(#5297),#5301);+#5297 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5298,#5299,#5300),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5298 = CARTESIAN_POINT('',(1.054036112919E-02,5.904187249058E-02));+#5299 = CARTESIAN_POINT('',(1.054036112919E-02,8.939494250922E-02));+#5300 = CARTESIAN_POINT('',(2.020896306724E-02,0.104928106279));+#5301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5302 = PCURVE('',#5013,#5303);+#5303 = DEFINITIONAL_REPRESENTATION('',(#5304),#5308);+#5304 = LINE('',#5305,#5306);+#5305 = CARTESIAN_POINT('',(0.,-0.1));+#5306 = VECTOR('',#5307,1.);+#5307 = DIRECTION('',(1.,0.));+#5308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5309 = ORIENTED_EDGE('',*,*,#5099,.T.);+#5310 = FACE_BOUND('',#5311,.F.);+#5311 = EDGE_LOOP('',(#5312,#5344,#5374,#5404,#5434,#5464,#5494,#5524));+#5312 = ORIENTED_EDGE('',*,*,#5313,.T.);+#5313 = EDGE_CURVE('',#5314,#5316,#5318,.T.);+#5314 = VERTEX_POINT('',#5315);+#5315 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.1500001)+ );+#5316 = VERTEX_POINT('',#5317);+#5317 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.1500001)+ );+#5318 = SURFACE_CURVE('',#5319,(#5323,#5330),.PCURVE_S1.);+#5319 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5320,#5321,#5322),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5320 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.1500001)+ );+#5321 = CARTESIAN_POINT('',(0.330792987618,5.159229394814E-02,1.1500001)+ );+#5322 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.1500001)+ );+#5323 = PCURVE('',#5115,#5324);+#5324 = DEFINITIONAL_REPRESENTATION('',(#5325),#5329);+#5325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5326,#5327,#5328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5326 = CARTESIAN_POINT('',(4.881851470362E-02,0.107781136359));+#5327 = CARTESIAN_POINT('',(3.764414688996E-02,0.107781136359));+#5328 = CARTESIAN_POINT('',(3.21362138187E-02,9.573500935385E-02));+#5329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5330 = PCURVE('',#5331,#5338);+#5331 = SURFACE_OF_LINEAR_EXTRUSION('',#5332,#5336);+#5332 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5333,#5334,#5335),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5333 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.2500001)+ );+#5334 = CARTESIAN_POINT('',(0.330792987618,5.159229394814E-02,1.2500001)+ );+#5335 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.2500001)+ );+#5336 = VECTOR('',#5337,1.);+#5337 = DIRECTION('',(0.,0.,1.));+#5338 = DEFINITIONAL_REPRESENTATION('',(#5339),#5343);+#5339 = LINE('',#5340,#5341);+#5340 = CARTESIAN_POINT('',(0.,-0.1));+#5341 = VECTOR('',#5342,1.);+#5342 = DIRECTION('',(1.,0.));+#5343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5344 = ORIENTED_EDGE('',*,*,#5345,.T.);+#5345 = EDGE_CURVE('',#5316,#5346,#5348,.T.);+#5346 = VERTEX_POINT('',#5347);+#5347 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.1500001)+ );+#5348 = SURFACE_CURVE('',#5349,(#5353,#5360),.PCURVE_S1.);+#5349 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5350,#5351,#5352),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5350 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.1500001)+ );+#5351 = CARTESIAN_POINT('',(0.319777121476,2.750003993856E-02,1.1500001)+ );+#5352 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.1500001)+ );+#5353 = PCURVE('',#5115,#5354);+#5354 = DEFINITIONAL_REPRESENTATION('',(#5355),#5359);+#5355 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5356,#5357,#5358),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5356 = CARTESIAN_POINT('',(3.21362138187E-02,9.573500935385E-02));+#5357 = CARTESIAN_POINT('',(2.662828074743E-02,8.368888234906E-02));+#5358 = CARTESIAN_POINT('',(2.662828074743E-02,5.904187249058E-02));+#5359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5360 = PCURVE('',#5361,#5368);+#5361 = SURFACE_OF_LINEAR_EXTRUSION('',#5362,#5366);+#5362 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5363,#5364,#5365),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5363 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.2500001)+ );+#5364 = CARTESIAN_POINT('',(0.319777121476,2.750003993856E-02,1.2500001)+ );+#5365 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.2500001)+ );+#5366 = VECTOR('',#5367,1.);+#5367 = DIRECTION('',(0.,0.,1.));+#5368 = DEFINITIONAL_REPRESENTATION('',(#5369),#5373);+#5369 = LINE('',#5370,#5371);+#5370 = CARTESIAN_POINT('',(0.,-0.1));+#5371 = VECTOR('',#5372,1.);+#5372 = DIRECTION('',(1.,0.));+#5373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5374 = ORIENTED_EDGE('',*,*,#5375,.T.);+#5375 = EDGE_CURVE('',#5346,#5376,#5378,.T.);+#5376 = VERTEX_POINT('',#5377);+#5377 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.1500001+ ));+#5378 = SURFACE_CURVE('',#5379,(#5383,#5390),.PCURVE_S1.);+#5379 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5380,#5381,#5382),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5380 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.1500001)+ );+#5381 = CARTESIAN_POINT('',(0.319777121476,-2.171472894284E-02,1.1500001+ ));+#5382 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.1500001+ ));+#5383 = PCURVE('',#5115,#5384);+#5384 = DEFINITIONAL_REPRESENTATION('',(#5385),#5389);+#5385 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5386,#5387,#5388),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5386 = CARTESIAN_POINT('',(2.662828074743E-02,5.904187249058E-02));+#5387 = CARTESIAN_POINT('',(2.662828074743E-02,3.447411346765E-02));+#5388 = CARTESIAN_POINT('',(3.21362138187E-02,2.242798646286E-02));+#5389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5390 = PCURVE('',#5391,#5398);+#5391 = SURFACE_OF_LINEAR_EXTRUSION('',#5392,#5396);+#5392 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5393,#5394,#5395),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5393 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.2500001)+ );+#5394 = CARTESIAN_POINT('',(0.319777121476,-2.171472894284E-02,1.2500001+ ));+#5395 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.2500001+ ));+#5396 = VECTOR('',#5397,1.);+#5397 = DIRECTION('',(0.,0.,1.));+#5398 = DEFINITIONAL_REPRESENTATION('',(#5399),#5403);+#5399 = LINE('',#5400,#5401);+#5400 = CARTESIAN_POINT('',(0.,-0.1));+#5401 = VECTOR('',#5402,1.);+#5402 = DIRECTION('',(1.,0.));+#5403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5404 = ORIENTED_EDGE('',*,*,#5405,.T.);+#5405 = EDGE_CURVE('',#5376,#5406,#5408,.T.);+#5406 = VERTEX_POINT('',#5407);+#5407 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.1500001+ ));+#5408 = SURFACE_CURVE('',#5409,(#5413,#5420),.PCURVE_S1.);+#5409 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5410,#5411,#5412),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5410 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.1500001+ ));+#5411 = CARTESIAN_POINT('',(0.330792987618,-4.580698295242E-02,1.1500001+ ));+#5412 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.1500001+ ));+#5413 = PCURVE('',#5115,#5414);+#5414 = DEFINITIONAL_REPRESENTATION('',(#5415),#5419);+#5415 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5416,#5417,#5418),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5416 = CARTESIAN_POINT('',(3.21362138187E-02,2.242798646286E-02));+#5417 = CARTESIAN_POINT('',(3.764414688996E-02,1.038185945807E-02));+#5418 = CARTESIAN_POINT('',(4.881851470362E-02,1.038185945807E-02));+#5419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5420 = PCURVE('',#5421,#5428);+#5421 = SURFACE_OF_LINEAR_EXTRUSION('',#5422,#5426);+#5422 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5423,#5424,#5425),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5423 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.2500001+ ));+#5424 = CARTESIAN_POINT('',(0.330792987618,-4.580698295242E-02,1.2500001+ ));+#5425 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.2500001+ ));+#5426 = VECTOR('',#5427,1.);+#5427 = DIRECTION('',(0.,0.,1.));+#5428 = DEFINITIONAL_REPRESENTATION('',(#5429),#5433);+#5429 = LINE('',#5430,#5431);+#5430 = CARTESIAN_POINT('',(0.,-0.1));+#5431 = VECTOR('',#5432,1.);+#5432 = DIRECTION('',(1.,0.));+#5433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5434 = ORIENTED_EDGE('',*,*,#5435,.T.);+#5435 = EDGE_CURVE('',#5406,#5436,#5438,.T.);+#5436 = VERTEX_POINT('',#5437);+#5437 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.1500001+ ));+#5438 = SURFACE_CURVE('',#5439,(#5443,#5450),.PCURVE_S1.);+#5439 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5440,#5441,#5442),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5440 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.1500001+ ));+#5441 = CARTESIAN_POINT('',(0.353220974081,-4.580698295242E-02,1.1500001+ ));+#5442 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.1500001+ ));+#5443 = PCURVE('',#5115,#5444);+#5444 = DEFINITIONAL_REPRESENTATION('',(#5445),#5449);+#5445 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5446,#5447,#5448),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5446 = CARTESIAN_POINT('',(4.881851470362E-02,1.038185945807E-02));+#5447 = CARTESIAN_POINT('',(6.007213335283E-02,1.038185945807E-02));+#5448 = CARTESIAN_POINT('',(6.55800664241E-02,2.242798646286E-02));+#5449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5450 = PCURVE('',#5451,#5458);+#5451 = SURFACE_OF_LINEAR_EXTRUSION('',#5452,#5456);+#5452 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5453,#5454,#5455),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5453 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.2500001+ ));+#5454 = CARTESIAN_POINT('',(0.353220974081,-4.580698295242E-02,1.2500001+ ));+#5455 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.2500001+ ));+#5456 = VECTOR('',#5457,1.);+#5457 = DIRECTION('',(0.,0.,1.));+#5458 = DEFINITIONAL_REPRESENTATION('',(#5459),#5463);+#5459 = LINE('',#5460,#5461);+#5460 = CARTESIAN_POINT('',(0.,-0.1));+#5461 = VECTOR('',#5462,1.);+#5462 = DIRECTION('',(1.,0.));+#5463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5464 = ORIENTED_EDGE('',*,*,#5465,.T.);+#5465 = EDGE_CURVE('',#5436,#5466,#5468,.T.);+#5466 = VERTEX_POINT('',#5467);+#5467 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.1500001)+ );+#5468 = SURFACE_CURVE('',#5469,(#5473,#5480),.PCURVE_S1.);+#5469 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5470,#5471,#5472),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5470 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.1500001+ ));+#5471 = CARTESIAN_POINT('',(0.364236840224,-2.171472894284E-02,1.1500001+ ));+#5472 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.1500001)+ );+#5473 = PCURVE('',#5115,#5474);+#5474 = DEFINITIONAL_REPRESENTATION('',(#5475),#5479);+#5475 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5476,#5477,#5478),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5476 = CARTESIAN_POINT('',(6.55800664241E-02,2.242798646286E-02));+#5477 = CARTESIAN_POINT('',(7.108799949537E-02,3.447411346765E-02));+#5478 = CARTESIAN_POINT('',(7.108799949537E-02,5.904187249058E-02));+#5479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5480 = PCURVE('',#5481,#5488);+#5481 = SURFACE_OF_LINEAR_EXTRUSION('',#5482,#5486);+#5482 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5483,#5484,#5485),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5483 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.2500001+ ));+#5484 = CARTESIAN_POINT('',(0.364236840224,-2.171472894284E-02,1.2500001+ ));+#5485 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.2500001)+ );+#5486 = VECTOR('',#5487,1.);+#5487 = DIRECTION('',(0.,0.,1.));+#5488 = DEFINITIONAL_REPRESENTATION('',(#5489),#5493);+#5489 = LINE('',#5490,#5491);+#5490 = CARTESIAN_POINT('',(0.,-0.1));+#5491 = VECTOR('',#5492,1.);+#5492 = DIRECTION('',(1.,0.));+#5493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5494 = ORIENTED_EDGE('',*,*,#5495,.T.);+#5495 = EDGE_CURVE('',#5466,#5496,#5498,.T.);+#5496 = VERTEX_POINT('',#5497);+#5497 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.1500001)+ );+#5498 = SURFACE_CURVE('',#5499,(#5503,#5510),.PCURVE_S1.);+#5499 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5500,#5501,#5502),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5500 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.1500001)+ );+#5501 = CARTESIAN_POINT('',(0.364236840224,2.750003993856E-02,1.1500001)+ );+#5502 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.1500001)+ );+#5503 = PCURVE('',#5115,#5504);+#5504 = DEFINITIONAL_REPRESENTATION('',(#5505),#5509);+#5505 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5506,#5507,#5508),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5506 = CARTESIAN_POINT('',(7.108799949537E-02,5.904187249058E-02));+#5507 = CARTESIAN_POINT('',(7.108799949537E-02,8.368888234906E-02));+#5508 = CARTESIAN_POINT('',(6.55800664241E-02,9.573500935385E-02));+#5509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5510 = PCURVE('',#5511,#5518);+#5511 = SURFACE_OF_LINEAR_EXTRUSION('',#5512,#5516);+#5512 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5513,#5514,#5515),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5513 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.2500001)+ );+#5514 = CARTESIAN_POINT('',(0.364236840224,2.750003993856E-02,1.2500001)+ );+#5515 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.2500001)+ );+#5516 = VECTOR('',#5517,1.);+#5517 = DIRECTION('',(0.,0.,1.));+#5518 = DEFINITIONAL_REPRESENTATION('',(#5519),#5523);+#5519 = LINE('',#5520,#5521);+#5520 = CARTESIAN_POINT('',(0.,-0.1));+#5521 = VECTOR('',#5522,1.);+#5522 = DIRECTION('',(1.,0.));+#5523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5524 = ORIENTED_EDGE('',*,*,#5525,.T.);+#5525 = EDGE_CURVE('',#5496,#5314,#5526,.T.);+#5526 = SURFACE_CURVE('',#5527,(#5531,#5538),.PCURVE_S1.);+#5527 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5528,#5529,#5530),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5528 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.1500001)+ );+#5529 = CARTESIAN_POINT('',(0.353220974081,5.159229394814E-02,1.1500001)+ );+#5530 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.1500001)+ );+#5531 = PCURVE('',#5115,#5532);+#5532 = DEFINITIONAL_REPRESENTATION('',(#5533),#5537);+#5533 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5534,#5535,#5536),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5534 = CARTESIAN_POINT('',(6.55800664241E-02,9.573500935385E-02));+#5535 = CARTESIAN_POINT('',(6.007213335283E-02,0.107781136359));+#5536 = CARTESIAN_POINT('',(4.881851470362E-02,0.107781136359));+#5537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5538 = PCURVE('',#5539,#5546);+#5539 = SURFACE_OF_LINEAR_EXTRUSION('',#5540,#5544);+#5540 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5541,#5542,#5543),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5541 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.2500001)+ );+#5542 = CARTESIAN_POINT('',(0.353220974081,5.159229394814E-02,1.2500001)+ );+#5543 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.2500001)+ );+#5544 = VECTOR('',#5545,1.);+#5545 = DIRECTION('',(0.,0.,1.));+#5546 = DEFINITIONAL_REPRESENTATION('',(#5547),#5551);+#5547 = LINE('',#5548,#5549);+#5548 = CARTESIAN_POINT('',(0.,-0.1));+#5549 = VECTOR('',#5550,1.);+#5550 = DIRECTION('',(1.,0.));+#5551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5552 = ADVANCED_FACE('',(#5553),#5539,.T.);+#5553 = FACE_BOUND('',#5554,.T.);+#5554 = EDGE_LOOP('',(#5555,#5591,#5612,#5613));+#5555 = ORIENTED_EDGE('',*,*,#5556,.T.);+#5556 = EDGE_CURVE('',#5557,#5559,#5561,.T.);+#5557 = VERTEX_POINT('',#5558);+#5558 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.2));+#5559 = VERTEX_POINT('',#5560);+#5560 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.2));+#5561 = SURFACE_CURVE('',#5562,(#5568,#5577),.PCURVE_S1.);+#5562 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5563,#5564,#5565,#5566,#5567),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5563 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.2));+#5564 = CARTESIAN_POINT('',(0.347594105272,5.159229394814E-02,1.2));+#5565 = CARTESIAN_POINT('',(0.352263746061,4.958464848093E-02,1.2));+#5566 = CARTESIAN_POINT('',(0.355975238352,4.556857928336E-02,1.2));+#5567 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.2));+#5568 = PCURVE('',#5539,#5569);+#5569 = DEFINITIONAL_REPRESENTATION('',(#5570),#5576);+#5570 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5571,#5572,#5573,#5574,#5575),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5571 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5572 = CARTESIAN_POINT('',(0.750002642893,-5.00001E-02));+#5573 = CARTESIAN_POINT('',(0.499983736994,-5.00001E-02));+#5574 = CARTESIAN_POINT('',(0.249972972127,-5.00001E-02));+#5575 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5577 = PCURVE('',#5578,#5583);+#5578 = PLANE('',#5579);+#5579 = AXIS2_PLACEMENT_3D('',#5580,#5581,#5582);+#5580 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#5581 = DIRECTION('',(0.,0.,1.));+#5582 = DIRECTION('',(0.43658423493,-0.899663384723,0.));+#5583 = DEFINITIONAL_REPRESENTATION('',(#5584),#5590);+#5584 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5585,#5586,#5587,#5588,#5589),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5585 = CARTESIAN_POINT('',(1.612605524629,0.330179890635));+#5586 = CARTESIAN_POINT('',(1.615062074903,0.335242071441));+#5587 = CARTESIAN_POINT('',(1.618906971571,0.338566669918));+#5588 = CARTESIAN_POINT('',(1.624140461001,0.340152411137));+#5589 = CARTESIAN_POINT('',(1.630760813257,0.340000495846));+#5590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5591 = ORIENTED_EDGE('',*,*,#5592,.T.);+#5592 = EDGE_CURVE('',#5559,#5496,#5593,.T.);+#5593 = SURFACE_CURVE('',#5594,(#5598,#5605),.PCURVE_S1.);+#5594 = LINE('',#5595,#5596);+#5595 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.2500001)+ );+#5596 = VECTOR('',#5597,1.);+#5597 = DIRECTION('',(-0.,-0.,-1.));+#5598 = PCURVE('',#5539,#5599);+#5599 = DEFINITIONAL_REPRESENTATION('',(#5600),#5604);+#5600 = LINE('',#5601,#5602);+#5601 = CARTESIAN_POINT('',(0.,0.));+#5602 = VECTOR('',#5603,1.);+#5603 = DIRECTION('',(0.,-1.));+#5604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5605 = PCURVE('',#5511,#5606);+#5606 = DEFINITIONAL_REPRESENTATION('',(#5607),#5611);+#5607 = LINE('',#5608,#5609);+#5608 = CARTESIAN_POINT('',(1.,0.));+#5609 = VECTOR('',#5610,1.);+#5610 = DIRECTION('',(0.,-1.));+#5611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5612 = ORIENTED_EDGE('',*,*,#5525,.T.);+#5613 = ORIENTED_EDGE('',*,*,#5614,.F.);+#5614 = EDGE_CURVE('',#5557,#5314,#5615,.T.);+#5615 = SURFACE_CURVE('',#5616,(#5620,#5627),.PCURVE_S1.);+#5616 = LINE('',#5617,#5618);+#5617 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.2500001)+ );+#5618 = VECTOR('',#5619,1.);+#5619 = DIRECTION('',(-0.,-0.,-1.));+#5620 = PCURVE('',#5539,#5621);+#5621 = DEFINITIONAL_REPRESENTATION('',(#5622),#5626);+#5622 = LINE('',#5623,#5624);+#5623 = CARTESIAN_POINT('',(1.,0.));+#5624 = VECTOR('',#5625,1.);+#5625 = DIRECTION('',(0.,-1.));+#5626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5627 = PCURVE('',#5331,#5628);+#5628 = DEFINITIONAL_REPRESENTATION('',(#5629),#5633);+#5629 = LINE('',#5630,#5631);+#5630 = CARTESIAN_POINT('',(0.,0.));+#5631 = VECTOR('',#5632,1.);+#5632 = DIRECTION('',(0.,-1.));+#5633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5634 = ADVANCED_FACE('',(#5635,#5857),#5578,.T.);+#5635 = FACE_BOUND('',#5636,.T.);+#5636 = EDGE_LOOP('',(#5637,#5675,#5704,#5733,#5762,#5800,#5829,#5856));+#5637 = ORIENTED_EDGE('',*,*,#5638,.F.);+#5638 = EDGE_CURVE('',#5639,#5557,#5641,.T.);+#5639 = VERTEX_POINT('',#5640);+#5640 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.2));+#5641 = SURFACE_CURVE('',#5642,(#5651,#5663),.PCURVE_S1.);+#5642 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5643,#5644,#5645,#5646,#5647,+ #5648,#5649,#5650),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#5643 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.2));+#5644 = CARTESIAN_POINT('',(0.32706118939,4.34306632901E-02,1.2));+#5645 = CARTESIAN_POINT('',(0.329230317705,4.648045476209E-02,1.2));+#5646 = CARTESIAN_POINT('',(0.331792525426,4.869498279571E-02,1.2));+#5647 = CARTESIAN_POINT('',(0.336374085465,5.083324888627E-02,1.2));+#5648 = CARTESIAN_POINT('',(0.338119526247,5.133929029708E-02,1.2));+#5649 = CARTESIAN_POINT('',(0.339983964754,5.159229394814E-02,1.2));+#5650 = CARTESIAN_POINT('',(0.341967355432,5.159229394814E-02,1.2));+#5651 = PCURVE('',#5578,#5652);+#5652 = DEFINITIONAL_REPRESENTATION('',(#5653),#5662);+#5653 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5654,#5655,#5656,#5657,#5658,+ #5659,#5660,#5661),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#5654 = CARTESIAN_POINT('',(1.616159754454,0.309912286213));+#5655 = CARTESIAN_POINT('',(1.613440447794,0.313206119563));+#5656 = CARTESIAN_POINT('',(1.611643669302,0.316489095762));+#5657 = CARTESIAN_POINT('',(1.610769959013,0.319761048259));+#5658 = CARTESIAN_POINT('',(1.610846476189,0.324816443337));+#5659 = CARTESIAN_POINT('',(1.611153241189,0.3266076822));+#5660 = CARTESIAN_POINT('',(1.611739607527,0.328395506664));+#5661 = CARTESIAN_POINT('',(1.612605524629,0.330179890635));+#5662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5663 = PCURVE('',#5331,#5664);+#5664 = DEFINITIONAL_REPRESENTATION('',(#5665),#5674);+#5665 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5666,#5667,#5668,#5669,#5670,+ #5671,#5672,#5673),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#5666 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5667 = CARTESIAN_POINT('',(0.838765756612,-5.00001E-02));+#5668 = CARTESIAN_POINT('',(0.677515731901,-5.00001E-02));+#5669 = CARTESIAN_POINT('',(0.516257837385,-5.00001E-02));+#5670 = CARTESIAN_POINT('',(0.266248653531,-5.00001E-02));+#5671 = CARTESIAN_POINT('',(0.177497324118,-5.00001E-02));+#5672 = CARTESIAN_POINT('',(8.874733279964E-02,-5.00001E-02));+#5673 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5675 = ORIENTED_EDGE('',*,*,#5676,.F.);+#5676 = EDGE_CURVE('',#5677,#5639,#5679,.T.);+#5677 = VERTEX_POINT('',#5678);+#5678 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.2));+#5679 = SURFACE_CURVE('',#5680,(#5686,#5695),.PCURVE_S1.);+#5680 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5681,#5682,#5683,#5684,#5685),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5681 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.2));+#5682 = CARTESIAN_POINT('',(0.319777121476,1.517044687707E-02,1.2));+#5683 = CARTESIAN_POINT('',(0.320694203144,2.539487807556E-02,1.2));+#5684 = CARTESIAN_POINT('',(0.322530072832,3.352088319257E-02,1.2));+#5685 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.2));+#5686 = PCURVE('',#5578,#5687);+#5687 = DEFINITIONAL_REPRESENTATION('',(#5688),#5694);+#5688 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5689,#5690,#5691,#5692,#5693),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5689 = CARTESIAN_POINT('',(1.646766549415,0.288937355419));+#5690 = CARTESIAN_POINT('',(1.635685020528,0.294314945407));+#5691 = CARTESIAN_POINT('',(1.626886857548,0.299603835678));+#5692 = CARTESIAN_POINT('',(1.620377700043,0.304803186142));+#5693 = CARTESIAN_POINT('',(1.616159754454,0.309912286213));+#5694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5695 = PCURVE('',#5361,#5696);+#5696 = DEFINITIONAL_REPRESENTATION('',(#5697),#5703);+#5697 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5698,#5699,#5700,#5701,#5702),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5698 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5699 = CARTESIAN_POINT('',(0.750123506508,-5.00001E-02));+#5700 = CARTESIAN_POINT('',(0.500143833517,-5.00001E-02));+#5701 = CARTESIAN_POINT('',(0.250092156109,-5.00001E-02));+#5702 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5704 = ORIENTED_EDGE('',*,*,#5705,.F.);+#5705 = EDGE_CURVE('',#5706,#5677,#5708,.T.);+#5706 = VERTEX_POINT('',#5707);+#5707 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.2));+#5708 = SURFACE_CURVE('',#5709,(#5715,#5724),.PCURVE_S1.);+#5709 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5710,#5711,#5712,#5713,#5714),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5710 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.2));+#5711 = CARTESIAN_POINT('',(0.322530081734,-2.773559166542E-02,1.2));+#5712 = CARTESIAN_POINT('',(0.320694211498,-1.962283008184E-02,1.2));+#5713 = CARTESIAN_POINT('',(0.319777121476,-9.424836741294E-03,1.2));+#5714 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.2));+#5715 = PCURVE('',#5578,#5716);+#5716 = DEFINITIONAL_REPRESENTATION('',(#5717),#5723);+#5717 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5718,#5719,#5720,#5721,#5722),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5718 = CARTESIAN_POINT('',(1.682111398792,0.277907595709));+#5719 = CARTESIAN_POINT('',(1.675487911436,0.27805958294));+#5720 = CARTESIAN_POINT('',(1.667387644888,0.279949821519));+#5721 = CARTESIAN_POINT('',(1.657812496636,0.283577032326));+#5722 = CARTESIAN_POINT('',(1.646766549415,0.288937355419));+#5723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5724 = PCURVE('',#5391,#5725);+#5725 = DEFINITIONAL_REPRESENTATION('',(#5726),#5732);+#5726 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5727,#5728,#5729,#5730,#5731),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5727 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5728 = CARTESIAN_POINT('',(0.749908651975,-5.00001E-02));+#5729 = CARTESIAN_POINT('',(0.49985746444,-5.00001E-02));+#5730 = CARTESIAN_POINT('',(0.249877630473,-5.00001E-02));+#5731 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5733 = ORIENTED_EDGE('',*,*,#5734,.F.);+#5734 = EDGE_CURVE('',#5735,#5706,#5737,.T.);+#5735 = VERTEX_POINT('',#5736);+#5736 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.2));+#5737 = SURFACE_CURVE('',#5738,(#5744,#5753),.PCURVE_S1.);+#5738 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5739,#5740,#5741,#5742,#5743),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5739 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.2));+#5740 = CARTESIAN_POINT('',(0.336380218981,-4.580698295242E-02,1.2));+#5741 = CARTESIAN_POINT('',(0.33173700071,-4.379932913926E-02,1.2));+#5742 = CARTESIAN_POINT('',(0.328038719285,-3.978325940325E-02,1.2));+#5743 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.2));+#5744 = PCURVE('',#5578,#5745);+#5745 = DEFINITIONAL_REPRESENTATION('',(#5746),#5752);+#5746 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5747,#5748,#5749,#5750,#5751),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5747 = CARTESIAN_POINT('',(1.700232087755,0.287656901846));+#5748 = CARTESIAN_POINT('',(1.697792832062,0.282630359756));+#5749 = CARTESIAN_POINT('',(1.69395946354,0.279329536294));+#5750 = CARTESIAN_POINT('',(1.688731741282,0.277755680643));+#5751 = CARTESIAN_POINT('',(1.682111398792,0.277907595709));+#5752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5753 = PCURVE('',#5421,#5754);+#5754 = DEFINITIONAL_REPRESENTATION('',(#5755),#5761);+#5755 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5756,#5757,#5758,#5759,#5760),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5756 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5757 = CARTESIAN_POINT('',(0.750002123433,-5.00001E-02));+#5758 = CARTESIAN_POINT('',(0.499983144654,-5.00001E-02));+#5759 = CARTESIAN_POINT('',(0.249972603361,-5.00001E-02));+#5760 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5762 = ORIENTED_EDGE('',*,*,#5763,.F.);+#5763 = EDGE_CURVE('',#5764,#5735,#5766,.T.);+#5764 = VERTEX_POINT('',#5765);+#5765 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.2));+#5766 = SURFACE_CURVE('',#5767,(#5776,#5788),.PCURVE_S1.);+#5767 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5768,#5769,#5770,#5771,#5772,+ #5773,#5774,#5775),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#5768 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.2));+#5769 = CARTESIAN_POINT('',(0.356980306552,-3.758513352021E-02,1.2));+#5770 = CARTESIAN_POINT('',(0.354845478352,-4.060038395938E-02,1.2));+#5771 = CARTESIAN_POINT('',(0.352324339314,-4.280607469858E-02,1.2));+#5772 = CARTESIAN_POINT('',(0.347745951169,-4.500457279865E-02,1.2));+#5773 = CARTESIAN_POINT('',(0.345947291836,-4.553952552051E-02,1.2));+#5774 = CARTESIAN_POINT('',(0.344021076416,-4.580698295242E-02,1.2));+#5775 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.2));+#5776 = PCURVE('',#5578,#5777);+#5777 = DEFINITIONAL_REPRESENTATION('',(#5778),#5787);+#5778 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5779,#5780,#5781,#5782,#5783,+ #5784,#5785,#5786),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#5779 = CARTESIAN_POINT('',(1.696712457595,0.307995805342));+#5780 = CARTESIAN_POINT('',(1.699389608645,0.304753034109));+#5781 = CARTESIAN_POINT('',(1.701170286724,0.30151599654));+#5782 = CARTESIAN_POINT('',(1.702053976362,0.298284850255));+#5783 = CARTESIAN_POINT('',(1.702033032519,0.293206012469));+#5784 = CARTESIAN_POINT('',(1.701729043586,0.291354272601));+#5785 = CARTESIAN_POINT('',(1.701128709959,0.289504559417));+#5786 = CARTESIAN_POINT('',(1.700232087755,0.287656901846));+#5787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5788 = PCURVE('',#5451,#5789);+#5789 = DEFINITIONAL_REPRESENTATION('',(#5790),#5799);+#5790 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5791,#5792,#5793,#5794,#5795,+ #5796,#5797,#5798),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#5791 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5792 = CARTESIAN_POINT('',(0.841265264302,-5.00001E-02));+#5793 = CARTESIAN_POINT('',(0.682515291442,-5.00001E-02));+#5794 = CARTESIAN_POINT('',(0.523757669192,-5.00001E-02));+#5795 = CARTESIAN_POINT('',(0.273748580646,-5.00001E-02));+#5796 = CARTESIAN_POINT('',(0.182497145522,-5.00001E-02));+#5797 = CARTESIAN_POINT('',(9.124713781295E-02,-5.00001E-02));+#5798 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5800 = ORIENTED_EDGE('',*,*,#5801,.F.);+#5801 = EDGE_CURVE('',#5802,#5764,#5804,.T.);+#5802 = VERTEX_POINT('',#5803);+#5803 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.2));+#5804 = SURFACE_CURVE('',#5805,(#5811,#5820),.PCURVE_S1.);+#5805 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5806,#5807,#5808,#5809,#5810),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5806 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.2));+#5807 = CARTESIAN_POINT('',(0.364236840224,-9.424836744601E-03,1.2));+#5808 = CARTESIAN_POINT('',(0.363319750202,-1.96228300803E-02,1.2));+#5809 = CARTESIAN_POINT('',(0.361483879965,-2.773559166649E-02,1.2));+#5810 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.2));+#5811 = PCURVE('',#5578,#5812);+#5812 = DEFINITIONAL_REPRESENTATION('',(#5813),#5819);+#5813 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5814,#5815,#5816,#5817,#5818),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5814 = CARTESIAN_POINT('',(1.666176961709,0.328936136471));+#5815 = CARTESIAN_POINT('',(1.677222908934,0.323575813377));+#5816 = CARTESIAN_POINT('',(1.68599728309,0.318298457945));+#5817 = CARTESIAN_POINT('',(1.692494525636,0.313104888904));+#5818 = CARTESIAN_POINT('',(1.696712457595,0.307995805342));+#5819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5820 = PCURVE('',#5481,#5821);+#5821 = DEFINITIONAL_REPRESENTATION('',(#5822),#5828);+#5822 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5823,#5824,#5825,#5826,#5827),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5823 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5824 = CARTESIAN_POINT('',(0.750122369459,-5.00001E-02));+#5825 = CARTESIAN_POINT('',(0.500142535597,-5.00001E-02));+#5826 = CARTESIAN_POINT('',(0.25009134798,-5.00001E-02));+#5827 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5829 = ORIENTED_EDGE('',*,*,#5830,.F.);+#5830 = EDGE_CURVE('',#5559,#5802,#5831,.T.);+#5831 = SURFACE_CURVE('',#5832,(#5838,#5847),.PCURVE_S1.);+#5832 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5833,#5834,#5835,#5836,#5837),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5833 = CARTESIAN_POINT('',(0.358728907152,3.954616694335E-02,1.2));+#5834 = CARTESIAN_POINT('',(0.361483888868,3.352088319143E-02,1.2));+#5835 = CARTESIAN_POINT('',(0.363319758555,2.539487807703E-02,1.2));+#5836 = CARTESIAN_POINT('',(0.364236840224,1.517044687406E-02,1.2));+#5837 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.2));+#5838 = PCURVE('',#5578,#5839);+#5839 = DEFINITIONAL_REPRESENTATION('',(#5840),#5846);+#5840 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5841,#5842,#5843,#5844,#5845),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5841 = CARTESIAN_POINT('',(1.630760813257,0.340000495846));+#5842 = CARTESIAN_POINT('',(1.637384322016,0.339848508124));+#5843 = CARTESIAN_POINT('',(1.645496503044,0.337952487135));+#5844 = CARTESIAN_POINT('',(1.655095432826,0.334313726459));+#5845 = CARTESIAN_POINT('',(1.666176961709,0.328936136471));+#5846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5847 = PCURVE('',#5511,#5848);+#5848 = DEFINITIONAL_REPRESENTATION('',(#5849),#5855);+#5849 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5850,#5851,#5852,#5853,#5854),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5850 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5851 = CARTESIAN_POINT('',(0.749907843844,-5.00001E-02));+#5852 = CARTESIAN_POINT('',(0.499856166519,-5.00001E-02));+#5853 = CARTESIAN_POINT('',(0.249876493431,-5.00001E-02));+#5854 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5856 = ORIENTED_EDGE('',*,*,#5556,.F.);+#5857 = FACE_BOUND('',#5858,.T.);+#5858 = EDGE_LOOP('',(#5859,#5897,#5933,#5969,#6005,#6041,#6077,#6113));+#5859 = ORIENTED_EDGE('',*,*,#5860,.F.);+#5860 = EDGE_CURVE('',#5861,#5863,#5865,.T.);+#5861 = VERTEX_POINT('',#5862);+#5862 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.2));+#5863 = VERTEX_POINT('',#5864);+#5864 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.2));+#5865 = SURFACE_CURVE('',#5866,(#5872,#5881),.PCURVE_S1.);+#5866 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5867,#5868,#5869,#5870,#5871),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5867 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.2));+#5868 = CARTESIAN_POINT('',(0.332952578888,9.193103159402E-03,1.2));+#5869 = CARTESIAN_POINT('',(0.331935517228,7.409955443002E-03,1.2));+#5870 = CARTESIAN_POINT('',(0.331426994303,5.428675230102E-03,1.2));+#5871 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.2));+#5872 = PCURVE('',#5578,#5873);+#5873 = DEFINITIONAL_REPRESENTATION('',(#5874),#5880);+#5874 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5875,#5876,#5877,#5878,#5879),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5875 = CARTESIAN_POINT('',(1.646054879852,0.305623300365));+#5876 = CARTESIAN_POINT('',(1.646814814803,0.303558807984));+#5877 = CARTESIAN_POINT('',(1.647975014426,0.301865300668));+#5878 = CARTESIAN_POINT('',(1.649535486596,0.300542805505));+#5879 = CARTESIAN_POINT('',(1.651496204855,0.299591317765));+#5880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5881 = PCURVE('',#5882,#5889);+#5882 = SURFACE_OF_LINEAR_EXTRUSION('',#5883,#5887);+#5883 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5884,#5885,#5886),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5884 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.2500001)+ );+#5885 = CARTESIAN_POINT('',(0.331426994303,7.608080213551E-03,1.2500001)+ );+#5886 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.2500001)+ );+#5887 = VECTOR('',#5888,1.);+#5888 = DIRECTION('',(0.,0.,1.));+#5889 = DEFINITIONAL_REPRESENTATION('',(#5890),#5896);+#5890 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5891,#5892,#5893,#5894,#5895),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5891 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5892 = CARTESIAN_POINT('',(0.75000098338,-5.00001E-02));+#5893 = CARTESIAN_POINT('',(0.500000119824,-5.00001E-02));+#5894 = CARTESIAN_POINT('',(0.249999196383,-5.00001E-02));+#5895 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5897 = ORIENTED_EDGE('',*,*,#5898,.F.);+#5898 = EDGE_CURVE('',#5899,#5861,#5901,.T.);+#5899 = VERTEX_POINT('',#5900);+#5900 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.2));+#5901 = SURFACE_CURVE('',#5902,(#5908,#5917),.PCURVE_S1.);+#5902 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5903,#5904,#5905,#5906,#5907),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5903 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.2));+#5904 = CARTESIAN_POINT('',(0.33966908721,1.394814705818E-02,1.2));+#5905 = CARTESIAN_POINT('',(0.337734035837,1.341981112185E-02,1.2));+#5906 = CARTESIAN_POINT('',(0.336003722586,1.236312258595E-02,1.2));+#5907 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.2));+#5908 = PCURVE('',#5578,#5909);+#5909 = DEFINITIONAL_REPRESENTATION('',(#5910),#5916);+#5910 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5911,#5912,#5913,#5914,#5915),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5911 = CARTESIAN_POINT('',(1.646403385904,0.313602451415));+#5912 = CARTESIAN_POINT('',(1.645469197562,0.311677381797));+#5913 = CARTESIAN_POINT('',(1.645099709135,0.309705823789));+#5914 = CARTESIAN_POINT('',(1.645294945633,0.307687790757));+#5915 = CARTESIAN_POINT('',(1.646054879852,0.305623300365));+#5916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5917 = PCURVE('',#5918,#5925);+#5918 = SURFACE_OF_LINEAR_EXTRUSION('',#5919,#5923);+#5919 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5920,#5921,#5922),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5920 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.2500001)+ );+#5921 = CARTESIAN_POINT('',(0.337529308641,1.394814705818E-02,1.2500001)+ );+#5922 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.2500001)+ );+#5923 = VECTOR('',#5924,1.);+#5924 = DIRECTION('',(0.,0.,1.));+#5925 = DEFINITIONAL_REPRESENTATION('',(#5926),#5932);+#5926 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5927,#5928,#5929,#5930,#5931),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5927 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5928 = CARTESIAN_POINT('',(0.750000702078,-5.00001E-02));+#5929 = CARTESIAN_POINT('',(0.499999651937,-5.00001E-02));+#5930 = CARTESIAN_POINT('',(0.24999877587,-5.00001E-02));+#5931 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5933 = ORIENTED_EDGE('',*,*,#5934,.F.);+#5934 = EDGE_CURVE('',#5935,#5899,#5937,.T.);+#5935 = VERTEX_POINT('',#5936);+#5936 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.2));+#5937 = SURFACE_CURVE('',#5938,(#5944,#5953),.PCURVE_S1.);+#5938 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5939,#5940,#5941,#5942,#5943),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5939 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.2));+#5940 = CARTESIAN_POINT('',(0.347831924059,1.236312355158E-02,1.2));+#5941 = CARTESIAN_POINT('',(0.346035567652,1.341981183542E-02,1.2));+#5942 = CARTESIAN_POINT('',(0.344027869427,1.394814705818E-02,1.2));+#5943 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.2));+#5944 = PCURVE('',#5578,#5945);+#5945 = DEFINITIONAL_REPRESENTATION('',(#5946),#5952);+#5946 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5947,#5948,#5949,#5950,#5951),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5947 = CARTESIAN_POINT('',(1.652576916782,0.319063175995));+#5948 = CARTESIAN_POINT('',(1.650458951055,0.318329190951));+#5949 = CARTESIAN_POINT('',(1.648724026409,0.317174408312));+#5950 = CARTESIAN_POINT('',(1.647372173161,0.31559881856));+#5951 = CARTESIAN_POINT('',(1.646403385904,0.313602451415));+#5952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5953 = PCURVE('',#5954,#5961);+#5954 = SURFACE_OF_LINEAR_EXTRUSION('',#5955,#5959);+#5955 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5956,#5957,#5958),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5956 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.2500001)+ );+#5957 = CARTESIAN_POINT('',(0.346246900552,1.394814705818E-02,1.2500001)+ );+#5958 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.2500001)+ );+#5959 = VECTOR('',#5960,1.);+#5960 = DIRECTION('',(0.,0.,1.));+#5961 = DEFINITIONAL_REPRESENTATION('',(#5962),#5968);+#5962 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5963,#5964,#5965,#5966,#5967),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5963 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5964 = CARTESIAN_POINT('',(0.750001071824,-5.00001E-02));+#5965 = CARTESIAN_POINT('',(0.500000133953,-5.00001E-02));+#5966 = CARTESIAN_POINT('',(0.249999129133,-5.00001E-02));+#5967 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5969 = ORIENTED_EDGE('',*,*,#5970,.F.);+#5970 = EDGE_CURVE('',#5971,#5935,#5973,.T.);+#5971 = VERTEX_POINT('',#5972);+#5972 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.2));+#5973 = SURFACE_CURVE('',#5974,(#5980,#5989),.PCURVE_S1.);+#5974 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5975,#5976,#5977,#5978,#5979),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5975 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.2));+#5976 = CARTESIAN_POINT('',(0.352586967397,5.428676304643E-03,1.2));+#5977 = CARTESIAN_POINT('',(0.352058631369,7.409957396937E-03,1.2));+#5978 = CARTESIAN_POINT('',(0.351001942888,9.193104722252E-03,1.2));+#5979 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.2));+#5980 = PCURVE('',#5578,#5981);+#5981 = DEFINITIONAL_REPRESENTATION('',(#5982),#5988);+#5982 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5983,#5984,#5985,#5986,#5987),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5983 = CARTESIAN_POINT('',(1.660734315519,0.318628170779));+#5984 = CARTESIAN_POINT('',(1.658773596294,0.319579658989));+#5985 = CARTESIAN_POINT('',(1.65676044706,0.319969330499));+#5986 = CARTESIAN_POINT('',(1.65469488117,0.319797160575));+#5987 = CARTESIAN_POINT('',(1.652576916782,0.319063175995));+#5988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5989 = PCURVE('',#5990,#5997);+#5990 = SURFACE_OF_LINEAR_EXTRUSION('',#5991,#5995);+#5991 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5992,#5993,#5994),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5992 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.2500001)+ );+#5993 = CARTESIAN_POINT('',(0.352586967397,7.608080213551E-03,1.2500001)+ );+#5994 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.2500001)+ );+#5995 = VECTOR('',#5996,1.);+#5996 = DIRECTION('',(0.,0.,1.));+#5997 = DEFINITIONAL_REPRESENTATION('',(#5998),#6004);+#5998 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5999,#6000,#6001,#6002,#6003),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5999 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6000 = CARTESIAN_POINT('',(0.750000680356,-5.00001E-02));+#6001 = CARTESIAN_POINT('',(0.499999633622,-5.00001E-02));+#6002 = CARTESIAN_POINT('',(0.249998770116,-5.00001E-02));+#6003 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6005 = ORIENTED_EDGE('',*,*,#6006,.F.);+#6006 = EDGE_CURVE('',#6007,#5971,#6009,.T.);+#6007 = VERTEX_POINT('',#6008);+#6008 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.2));+#6009 = SURFACE_CURVE('',#6010,(#6016,#6025),.PCURVE_S1.);+#6010 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6011,#6012,#6013,#6014,#6015),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6011 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.2));+#6012 = CARTESIAN_POINT('',(0.351021757873,-2.734159277953E-03,1.2));+#6013 = CARTESIAN_POINT('',(0.352065237128,-9.642193746802E-04,1.2));+#6014 = CARTESIAN_POINT('',(0.352586967397,1.030270215671E-03,1.2));+#6015 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.2));+#6016 = PCURVE('',#5578,#6017);+#6017 = DEFINITIONAL_REPRESENTATION('',(#6018),#6024);+#6018 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6019,#6020,#6021,#6022,#6023),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6019 = CARTESIAN_POINT('',(1.666141040857,0.312524889104));+#6020 = CARTESIAN_POINT('',(1.665434054781,0.314607731963));+#6021 = CARTESIAN_POINT('',(1.664297271249,0.3163192399));+#6022 = CARTESIAN_POINT('',(1.662730681203,0.317659384231));+#6023 = CARTESIAN_POINT('',(1.660734315519,0.318628170779));+#6024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6025 = PCURVE('',#6026,#6033);+#6026 = SURFACE_OF_LINEAR_EXTRUSION('',#6027,#6031);+#6027 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6028,#6029,#6030),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6028 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.2500001)+ );+#6029 = CARTESIAN_POINT('',(0.352586967397,-1.188762533367E-03,1.2500001+ ));+#6030 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.2500001+ ));+#6031 = VECTOR('',#6032,1.);+#6032 = DIRECTION('',(0.,0.,1.));+#6033 = DEFINITIONAL_REPRESENTATION('',(#6034),#6040);+#6034 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6035,#6036,#6037,#6038,#6039),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6035 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6036 = CARTESIAN_POINT('',(0.750000881849,-5.00001E-02));+#6037 = CARTESIAN_POINT('',(0.499999885355,-5.00001E-02));+#6038 = CARTESIAN_POINT('',(0.249998946223,-5.00001E-02));+#6039 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6041 = ORIENTED_EDGE('',*,*,#6042,.F.);+#6042 = EDGE_CURVE('',#6043,#6007,#6045,.T.);+#6043 = VERTEX_POINT('',#6044);+#6044 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.2));+#6045 = SURFACE_CURVE('',#6046,(#6052,#6061),.PCURVE_S1.);+#6046 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6047,#6048,#6049,#6050,#6051),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6047 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.2));+#6048 = CARTESIAN_POINT('',(0.344067491555,-7.370327706877E-03,1.2));+#6049 = CARTESIAN_POINT('',(0.3460950022,-6.855202302035E-03,1.2));+#6050 = CARTESIAN_POINT('',(0.347891359728,-5.824932130093E-03,1.2));+#6051 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.2));+#6052 = PCURVE('',#5578,#6053);+#6053 = DEFINITIONAL_REPRESENTATION('',(#6054),#6060);+#6054 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6055,#6056,#6057,#6058,#6059),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6055 = CARTESIAN_POINT('',(1.665582837068,0.30429514142));+#6056 = CARTESIAN_POINT('',(1.666568922722,0.306327155143));+#6057 = CARTESIAN_POINT('',(1.66699066244,0.308376127863));+#6058 = CARTESIAN_POINT('',(1.666848027467,0.310442044672));+#6059 = CARTESIAN_POINT('',(1.666141040857,0.312524889104));+#6060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6061 = PCURVE('',#6062,#6069);+#6062 = SURFACE_OF_LINEAR_EXTRUSION('',#6063,#6067);+#6063 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6064,#6065,#6066),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6064 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.2500001+ ));+#6065 = CARTESIAN_POINT('',(0.346326151388,-7.370327706877E-03,1.2500001+ ));+#6066 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.2500001+ ));+#6067 = VECTOR('',#6068,1.);+#6068 = DIRECTION('',(0.,0.,1.));+#6069 = DEFINITIONAL_REPRESENTATION('',(#6070),#6076);+#6070 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6071,#6072,#6073,#6074,#6075),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6071 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6072 = CARTESIAN_POINT('',(0.750001219669,-5.00001E-02));+#6073 = CARTESIAN_POINT('',(0.50000035115,-5.00001E-02));+#6074 = CARTESIAN_POINT('',(0.249999307068,-5.00001E-02));+#6075 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6077 = ORIENTED_EDGE('',*,*,#6078,.F.);+#6078 = EDGE_CURVE('',#6079,#6043,#6081,.T.);+#6079 = VERTEX_POINT('',#6080);+#6080 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.2));+#6081 = SURFACE_CURVE('',#6082,(#6088,#6097),.PCURVE_S1.);+#6082 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6083,#6084,#6085,#6086,#6087),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6083 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.2));+#6084 = CARTESIAN_POINT('',(0.335884850913,-5.864558902912E-03,1.2));+#6085 = CARTESIAN_POINT('',(0.337615166318,-6.868411303657E-03,1.2));+#6086 = CARTESIAN_POINT('',(0.339589842645,-7.370327706878E-03,1.2));+#6087 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.2));+#6088 = PCURVE('',#5578,#6089);+#6089 = DEFINITIONAL_REPRESENTATION('',(#6090),#6096);+#6090 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6091,#6092,#6093,#6094,#6095),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6091 = CARTESIAN_POINT('',(1.659638403504,0.298943465197));+#6092 = CARTESIAN_POINT('',(1.661641825759,0.299622927888));+#6093 = CARTESIAN_POINT('',(1.663300383434,0.300741363169));+#6094 = CARTESIAN_POINT('',(1.664614051798,0.302298778369));+#6095 = CARTESIAN_POINT('',(1.665582837068,0.30429514142));+#6096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6097 = PCURVE('',#6098,#6105);+#6098 = SURFACE_OF_LINEAR_EXTRUSION('',#6099,#6103);+#6099 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6100,#6101,#6102),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6100 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.2500001+ ));+#6101 = CARTESIAN_POINT('',(0.33737080697,-7.370327706877E-03,1.2500001)+ );+#6102 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.2500001)+ );+#6103 = VECTOR('',#6104,1.);+#6104 = DIRECTION('',(0.,0.,1.));+#6105 = DEFINITIONAL_REPRESENTATION('',(#6106),#6112);+#6106 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6107,#6108,#6109,#6110,#6111),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6107 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6108 = CARTESIAN_POINT('',(0.750000486192,-5.00001E-02));+#6109 = CARTESIAN_POINT('',(0.499999401774,-5.00001E-02));+#6110 = CARTESIAN_POINT('',(0.24999861651,-5.00001E-02));+#6111 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6113 = ORIENTED_EDGE('',*,*,#6114,.F.);+#6114 = EDGE_CURVE('',#5863,#6079,#6115,.T.);+#6115 = SURFACE_CURVE('',#6116,(#6122,#6131),.PCURVE_S1.);+#6116 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6117,#6118,#6119,#6120,#6121),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6117 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.2));+#6118 = CARTESIAN_POINT('',(0.331426994303,9.510261322045E-04,1.2));+#6119 = CARTESIAN_POINT('',(0.331922305083,-1.083088567985E-03,1.2));+#6120 = CARTESIAN_POINT('',(0.332912948294,-2.85303091554E-03,1.2));+#6121 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.2));+#6122 = PCURVE('',#5578,#6123);+#6123 = DEFINITIONAL_REPRESENTATION('',(#6124),#6130);+#6124 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6125,#6126,#6127,#6128,#6129),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6125 = CARTESIAN_POINT('',(1.651496204855,0.299591317765));+#6126 = CARTESIAN_POINT('',(1.653563863539,0.2985879345));+#6127 = CARTESIAN_POINT('',(1.655610126933,0.298145485062));+#6128 = CARTESIAN_POINT('',(1.657634978465,0.298264001561));+#6129 = CARTESIAN_POINT('',(1.659638403504,0.298943465197));+#6130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6131 = PCURVE('',#6132,#6139);+#6132 = SURFACE_OF_LINEAR_EXTRUSION('',#6133,#6137);+#6133 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6134,#6135,#6136),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6134 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.2500001)+ );+#6135 = CARTESIAN_POINT('',(0.331426994303,-1.347264204483E-03,1.2500001+ ));+#6136 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.2500001)+ );+#6137 = VECTOR('',#6138,1.);+#6138 = DIRECTION('',(0.,0.,1.));+#6139 = DEFINITIONAL_REPRESENTATION('',(#6140),#6146);+#6140 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6141,#6142,#6143,#6144,#6145),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6141 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6142 = CARTESIAN_POINT('',(0.750001751914,-5.00001E-02));+#6143 = CARTESIAN_POINT('',(0.50000107549,-5.00001E-02));+#6144 = CARTESIAN_POINT('',(0.24999986129,-5.00001E-02));+#6145 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6147 = ADVANCED_FACE('',(#6148),#5918,.T.);+#6148 = FACE_BOUND('',#6149,.T.);+#6149 = EDGE_LOOP('',(#6150,#6151,#6174,#6202));+#6150 = ORIENTED_EDGE('',*,*,#5898,.T.);+#6151 = ORIENTED_EDGE('',*,*,#6152,.T.);+#6152 = EDGE_CURVE('',#5861,#6153,#6155,.T.);+#6153 = VERTEX_POINT('',#6154);+#6154 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.1500001)+ );+#6155 = SURFACE_CURVE('',#6156,(#6160,#6167),.PCURVE_S1.);+#6156 = LINE('',#6157,#6158);+#6157 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.2500001)+ );+#6158 = VECTOR('',#6159,1.);+#6159 = DIRECTION('',(-0.,-0.,-1.));+#6160 = PCURVE('',#5918,#6161);+#6161 = DEFINITIONAL_REPRESENTATION('',(#6162),#6166);+#6162 = LINE('',#6163,#6164);+#6163 = CARTESIAN_POINT('',(0.,0.));+#6164 = VECTOR('',#6165,1.);+#6165 = DIRECTION('',(0.,-1.));+#6166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6167 = PCURVE('',#5882,#6168);+#6168 = DEFINITIONAL_REPRESENTATION('',(#6169),#6173);+#6169 = LINE('',#6170,#6171);+#6170 = CARTESIAN_POINT('',(1.,0.));+#6171 = VECTOR('',#6172,1.);+#6172 = DIRECTION('',(0.,-1.));+#6173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6174 = ORIENTED_EDGE('',*,*,#6175,.T.);+#6175 = EDGE_CURVE('',#6153,#6176,#6178,.T.);+#6176 = VERTEX_POINT('',#6177);+#6177 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.1500001)+ );+#6178 = SURFACE_CURVE('',#6179,(#6183,#6190),.PCURVE_S1.);+#6179 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6180,#6181,#6182),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6180 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.1500001)+ );+#6181 = CARTESIAN_POINT('',(0.337529308641,1.394814705818E-02,1.1500001)+ );+#6182 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.1500001)+ );+#6183 = PCURVE('',#5918,#6184);+#6184 = DEFINITIONAL_REPRESENTATION('',(#6185),#6189);+#6185 = LINE('',#6186,#6187);+#6186 = CARTESIAN_POINT('',(0.,-0.1));+#6187 = VECTOR('',#6188,1.);+#6188 = DIRECTION('',(1.,0.));+#6189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6190 = PCURVE('',#6191,#6196);+#6191 = PLANE('',#6192);+#6192 = AXIS2_PLACEMENT_3D('',#6193,#6194,#6195);+#6193 = CARTESIAN_POINT('',(0.293148840728,-5.618884241049E-02,1.1500001+ ));+#6194 = DIRECTION('',(0.,0.,1.));+#6195 = DIRECTION('',(1.,0.,0.));+#6196 = DEFINITIONAL_REPRESENTATION('',(#6197),#6201);+#6197 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6198,#6199,#6200),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6198 = CARTESIAN_POINT('',(4.13293107434E-02,6.696695604636E-02));+#6199 = CARTESIAN_POINT('',(4.438046791238E-02,7.013698946867E-02));+#6200 = CARTESIAN_POINT('',(4.86600130325E-02,7.013698946867E-02));+#6201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6202 = ORIENTED_EDGE('',*,*,#6203,.F.);+#6203 = EDGE_CURVE('',#5899,#6176,#6204,.T.);+#6204 = SURFACE_CURVE('',#6205,(#6209,#6216),.PCURVE_S1.);+#6205 = LINE('',#6206,#6207);+#6206 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.2500001)+ );+#6207 = VECTOR('',#6208,1.);+#6208 = DIRECTION('',(-0.,-0.,-1.));+#6209 = PCURVE('',#5918,#6210);+#6210 = DEFINITIONAL_REPRESENTATION('',(#6211),#6215);+#6211 = LINE('',#6212,#6213);+#6212 = CARTESIAN_POINT('',(1.,0.));+#6213 = VECTOR('',#6214,1.);+#6214 = DIRECTION('',(0.,-1.));+#6215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6216 = PCURVE('',#5954,#6217);+#6217 = DEFINITIONAL_REPRESENTATION('',(#6218),#6222);+#6218 = LINE('',#6219,#6220);+#6219 = CARTESIAN_POINT('',(0.,0.));+#6220 = VECTOR('',#6221,1.);+#6221 = DIRECTION('',(0.,-1.));+#6222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6223 = ADVANCED_FACE('',(#6224),#6191,.T.);+#6224 = FACE_BOUND('',#6225,.F.);+#6225 = EDGE_LOOP('',(#6226,#6249,#6250,#6273,#6296,#6319,#6342,#6365));+#6226 = ORIENTED_EDGE('',*,*,#6227,.T.);+#6227 = EDGE_CURVE('',#6228,#6153,#6230,.T.);+#6228 = VERTEX_POINT('',#6229);+#6229 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.1500001)+ );+#6230 = SURFACE_CURVE('',#6231,(#6235,#6242),.PCURVE_S1.);+#6231 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6232,#6233,#6234),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6232 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.1500001)+ );+#6233 = CARTESIAN_POINT('',(0.331426994303,7.608080213551E-03,1.1500001)+ );+#6234 = CARTESIAN_POINT('',(0.334478151472,1.077811363586E-02,1.1500001)+ );+#6235 = PCURVE('',#6191,#6236);+#6236 = DEFINITIONAL_REPRESENTATION('',(#6237),#6241);+#6237 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6238,#6239,#6240),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6238 = CARTESIAN_POINT('',(3.827815357443E-02,5.943812666837E-02));+#6239 = CARTESIAN_POINT('',(3.827815357443E-02,6.379692262405E-02));+#6240 = CARTESIAN_POINT('',(4.13293107434E-02,6.696695604636E-02));+#6241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6242 = PCURVE('',#5882,#6243);+#6243 = DEFINITIONAL_REPRESENTATION('',(#6244),#6248);+#6244 = LINE('',#6245,#6246);+#6245 = CARTESIAN_POINT('',(0.,-0.1));+#6246 = VECTOR('',#6247,1.);+#6247 = DIRECTION('',(1.,0.));+#6248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6249 = ORIENTED_EDGE('',*,*,#6175,.T.);+#6250 = ORIENTED_EDGE('',*,*,#6251,.T.);+#6251 = EDGE_CURVE('',#6176,#6252,#6254,.T.);+#6252 = VERTEX_POINT('',#6253);+#6253 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.1500001)+ );+#6254 = SURFACE_CURVE('',#6255,(#6259,#6266),.PCURVE_S1.);+#6255 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6256,#6257,#6258),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6256 = CARTESIAN_POINT('',(0.341808853761,1.394814705818E-02,1.1500001)+ );+#6257 = CARTESIAN_POINT('',(0.346246900552,1.394814705818E-02,1.1500001)+ );+#6258 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.1500001)+ );+#6259 = PCURVE('',#6191,#6260);+#6260 = DEFINITIONAL_REPRESENTATION('',(#6261),#6265);+#6261 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6262,#6263,#6264),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6262 = CARTESIAN_POINT('',(4.86600130325E-02,7.013698946867E-02));+#6263 = CARTESIAN_POINT('',(5.309805982374E-02,7.013698946867E-02));+#6264 = CARTESIAN_POINT('',(5.626809324605E-02,6.696695604636E-02));+#6265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6266 = PCURVE('',#5954,#6267);+#6267 = DEFINITIONAL_REPRESENTATION('',(#6268),#6272);+#6268 = LINE('',#6269,#6270);+#6269 = CARTESIAN_POINT('',(0.,-0.1));+#6270 = VECTOR('',#6271,1.);+#6271 = DIRECTION('',(1.,0.));+#6272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6273 = ORIENTED_EDGE('',*,*,#6274,.T.);+#6274 = EDGE_CURVE('',#6252,#6275,#6277,.T.);+#6275 = VERTEX_POINT('',#6276);+#6276 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.1500001)+ );+#6277 = SURFACE_CURVE('',#6278,(#6282,#6289),.PCURVE_S1.);+#6278 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6279,#6280,#6281),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6279 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.1500001)+ );+#6280 = CARTESIAN_POINT('',(0.352586967397,7.608080213551E-03,1.1500001)+ );+#6281 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.1500001)+ );+#6282 = PCURVE('',#6191,#6283);+#6283 = DEFINITIONAL_REPRESENTATION('',(#6284),#6288);+#6284 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6285,#6286,#6287),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6285 = CARTESIAN_POINT('',(5.626809324605E-02,6.696695604636E-02));+#6286 = CARTESIAN_POINT('',(5.943812666837E-02,6.379692262405E-02));+#6287 = CARTESIAN_POINT('',(5.943812666837E-02,5.943812666837E-02));+#6288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6289 = PCURVE('',#5990,#6290);+#6290 = DEFINITIONAL_REPRESENTATION('',(#6291),#6295);+#6291 = LINE('',#6292,#6293);+#6292 = CARTESIAN_POINT('',(0.,-0.1));+#6293 = VECTOR('',#6294,1.);+#6294 = DIRECTION('',(1.,0.));+#6295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6296 = ORIENTED_EDGE('',*,*,#6297,.T.);+#6297 = EDGE_CURVE('',#6275,#6298,#6300,.T.);+#6298 = VERTEX_POINT('',#6299);+#6299 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.1500001+ ));+#6300 = SURFACE_CURVE('',#6301,(#6305,#6312),.PCURVE_S1.);+#6301 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6302,#6303,#6304),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6302 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.1500001)+ );+#6303 = CARTESIAN_POINT('',(0.352586967397,-1.188762533367E-03,1.1500001+ ));+#6304 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.1500001+ ));+#6305 = PCURVE('',#6191,#6306);+#6306 = DEFINITIONAL_REPRESENTATION('',(#6307),#6311);+#6307 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6308,#6309,#6310),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6308 = CARTESIAN_POINT('',(5.943812666837E-02,5.943812666837E-02));+#6309 = CARTESIAN_POINT('',(5.943812666837E-02,5.500007987713E-02));+#6310 = CARTESIAN_POINT('',(5.630771866383E-02,5.190929729037E-02));+#6311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6312 = PCURVE('',#6026,#6313);+#6313 = DEFINITIONAL_REPRESENTATION('',(#6314),#6318);+#6314 = LINE('',#6315,#6316);+#6315 = CARTESIAN_POINT('',(0.,-0.1));+#6316 = VECTOR('',#6317,1.);+#6317 = DIRECTION('',(1.,0.));+#6318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6319 = ORIENTED_EDGE('',*,*,#6320,.T.);+#6320 = EDGE_CURVE('',#6298,#6321,#6323,.T.);+#6321 = VERTEX_POINT('',#6322);+#6322 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.1500001+ ));+#6323 = SURFACE_CURVE('',#6324,(#6328,#6335),.PCURVE_S1.);+#6324 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6325,#6326,#6327),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6325 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.1500001+ ));+#6326 = CARTESIAN_POINT('',(0.346326151388,-7.370327706877E-03,1.1500001+ ));+#6327 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.1500001+ ));+#6328 = PCURVE('',#6191,#6329);+#6329 = DEFINITIONAL_REPRESENTATION('',(#6330),#6334);+#6330 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6331,#6332,#6333),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6331 = CARTESIAN_POINT('',(5.630771866383E-02,5.190929729037E-02));+#6332 = CARTESIAN_POINT('',(5.31773106593E-02,4.881851470362E-02));+#6333 = CARTESIAN_POINT('',(4.86600130325E-02,4.881851470362E-02));+#6334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6335 = PCURVE('',#6062,#6336);+#6336 = DEFINITIONAL_REPRESENTATION('',(#6337),#6341);+#6337 = LINE('',#6338,#6339);+#6338 = CARTESIAN_POINT('',(0.,-0.1));+#6339 = VECTOR('',#6340,1.);+#6340 = DIRECTION('',(1.,0.));+#6341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6342 = ORIENTED_EDGE('',*,*,#6343,.T.);+#6343 = EDGE_CURVE('',#6321,#6344,#6346,.T.);+#6344 = VERTEX_POINT('',#6345);+#6345 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.1500001)+ );+#6346 = SURFACE_CURVE('',#6347,(#6351,#6358),.PCURVE_S1.);+#6347 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6348,#6349,#6350),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6348 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.1500001+ ));+#6349 = CARTESIAN_POINT('',(0.33737080697,-7.370327706877E-03,1.1500001)+ );+#6350 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.1500001)+ );+#6351 = PCURVE('',#6191,#6352);+#6352 = DEFINITIONAL_REPRESENTATION('',(#6353),#6357);+#6353 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6354,#6355,#6356),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6354 = CARTESIAN_POINT('',(4.86600130325E-02,4.881851470362E-02));+#6355 = CARTESIAN_POINT('',(4.422196624126E-02,4.881851470362E-02));+#6356 = CARTESIAN_POINT('',(4.125005990785E-02,5.183004645481E-02));+#6357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6358 = PCURVE('',#6098,#6359);+#6359 = DEFINITIONAL_REPRESENTATION('',(#6360),#6364);+#6360 = LINE('',#6361,#6362);+#6361 = CARTESIAN_POINT('',(0.,-0.1));+#6362 = VECTOR('',#6363,1.);+#6363 = DIRECTION('',(1.,0.));+#6364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6365 = ORIENTED_EDGE('',*,*,#6366,.T.);+#6366 = EDGE_CURVE('',#6344,#6228,#6367,.T.);+#6367 = SURFACE_CURVE('',#6368,(#6372,#6379),.PCURVE_S1.);+#6368 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6369,#6370,#6371),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6369 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.1500001)+ );+#6370 = CARTESIAN_POINT('',(0.331426994303,-1.347264204483E-03,1.1500001+ ));+#6371 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.1500001)+ );+#6372 = PCURVE('',#6191,#6373);+#6373 = DEFINITIONAL_REPRESENTATION('',(#6374),#6378);+#6374 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6375,#6376,#6377),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6375 = CARTESIAN_POINT('',(4.125005990785E-02,5.183004645481E-02));+#6376 = CARTESIAN_POINT('',(3.827815357443E-02,5.484157820601E-02));+#6377 = CARTESIAN_POINT('',(3.827815357443E-02,5.943812666837E-02));+#6378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6379 = PCURVE('',#6132,#6380);+#6380 = DEFINITIONAL_REPRESENTATION('',(#6381),#6385);+#6381 = LINE('',#6382,#6383);+#6382 = CARTESIAN_POINT('',(0.,-0.1));+#6383 = VECTOR('',#6384,1.);+#6384 = DIRECTION('',(1.,0.));+#6385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6386 = ADVANCED_FACE('',(#6387),#5954,.T.);+#6387 = FACE_BOUND('',#6388,.T.);+#6388 = EDGE_LOOP('',(#6389,#6390,#6391,#6392));+#6389 = ORIENTED_EDGE('',*,*,#5934,.T.);+#6390 = ORIENTED_EDGE('',*,*,#6203,.T.);+#6391 = ORIENTED_EDGE('',*,*,#6251,.T.);+#6392 = ORIENTED_EDGE('',*,*,#6393,.F.);+#6393 = EDGE_CURVE('',#5935,#6252,#6394,.T.);+#6394 = SURFACE_CURVE('',#6395,(#6399,#6406),.PCURVE_S1.);+#6395 = LINE('',#6396,#6397);+#6396 = CARTESIAN_POINT('',(0.349416933974,1.077811363586E-02,1.2500001)+ );+#6397 = VECTOR('',#6398,1.);+#6398 = DIRECTION('',(-0.,-0.,-1.));+#6399 = PCURVE('',#5954,#6400);+#6400 = DEFINITIONAL_REPRESENTATION('',(#6401),#6405);+#6401 = LINE('',#6402,#6403);+#6402 = CARTESIAN_POINT('',(1.,0.));+#6403 = VECTOR('',#6404,1.);+#6404 = DIRECTION('',(0.,-1.));+#6405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6406 = PCURVE('',#5990,#6407);+#6407 = DEFINITIONAL_REPRESENTATION('',(#6408),#6412);+#6408 = LINE('',#6409,#6410);+#6409 = CARTESIAN_POINT('',(0.,0.));+#6410 = VECTOR('',#6411,1.);+#6411 = DIRECTION('',(0.,-1.));+#6412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6413 = ADVANCED_FACE('',(#6414),#5990,.T.);+#6414 = FACE_BOUND('',#6415,.T.);+#6415 = EDGE_LOOP('',(#6416,#6417,#6418,#6419));+#6416 = ORIENTED_EDGE('',*,*,#5970,.T.);+#6417 = ORIENTED_EDGE('',*,*,#6393,.T.);+#6418 = ORIENTED_EDGE('',*,*,#6274,.T.);+#6419 = ORIENTED_EDGE('',*,*,#6420,.F.);+#6420 = EDGE_CURVE('',#5971,#6275,#6421,.T.);+#6421 = SURFACE_CURVE('',#6422,(#6426,#6433),.PCURVE_S1.);+#6422 = LINE('',#6423,#6424);+#6423 = CARTESIAN_POINT('',(0.352586967397,3.249284257871E-03,1.2500001)+ );+#6424 = VECTOR('',#6425,1.);+#6425 = DIRECTION('',(-0.,-0.,-1.));+#6426 = PCURVE('',#5990,#6427);+#6427 = DEFINITIONAL_REPRESENTATION('',(#6428),#6432);+#6428 = LINE('',#6429,#6430);+#6429 = CARTESIAN_POINT('',(1.,0.));+#6430 = VECTOR('',#6431,1.);+#6431 = DIRECTION('',(0.,-1.));+#6432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6433 = PCURVE('',#6026,#6434);+#6434 = DEFINITIONAL_REPRESENTATION('',(#6435),#6439);+#6435 = LINE('',#6436,#6437);+#6436 = CARTESIAN_POINT('',(0.,0.));+#6437 = VECTOR('',#6438,1.);+#6438 = DIRECTION('',(0.,-1.));+#6439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6440 = ADVANCED_FACE('',(#6441),#6026,.T.);+#6441 = FACE_BOUND('',#6442,.T.);+#6442 = EDGE_LOOP('',(#6443,#6444,#6445,#6446));+#6443 = ORIENTED_EDGE('',*,*,#6006,.T.);+#6444 = ORIENTED_EDGE('',*,*,#6420,.T.);+#6445 = ORIENTED_EDGE('',*,*,#6297,.T.);+#6446 = ORIENTED_EDGE('',*,*,#6447,.F.);+#6447 = EDGE_CURVE('',#6007,#6298,#6448,.T.);+#6448 = SURFACE_CURVE('',#6449,(#6453,#6460),.PCURVE_S1.);+#6449 = LINE('',#6450,#6451);+#6450 = CARTESIAN_POINT('',(0.349456559392,-4.279545120122E-03,1.2500001+ ));+#6451 = VECTOR('',#6452,1.);+#6452 = DIRECTION('',(-0.,-0.,-1.));+#6453 = PCURVE('',#6026,#6454);+#6454 = DEFINITIONAL_REPRESENTATION('',(#6455),#6459);+#6455 = LINE('',#6456,#6457);+#6456 = CARTESIAN_POINT('',(1.,0.));+#6457 = VECTOR('',#6458,1.);+#6458 = DIRECTION('',(0.,-1.));+#6459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6460 = PCURVE('',#6062,#6461);+#6461 = DEFINITIONAL_REPRESENTATION('',(#6462),#6466);+#6462 = LINE('',#6463,#6464);+#6463 = CARTESIAN_POINT('',(0.,0.));+#6464 = VECTOR('',#6465,1.);+#6465 = DIRECTION('',(0.,-1.));+#6466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6467 = ADVANCED_FACE('',(#6468),#6062,.T.);+#6468 = FACE_BOUND('',#6469,.T.);+#6469 = EDGE_LOOP('',(#6470,#6471,#6472,#6473));+#6470 = ORIENTED_EDGE('',*,*,#6042,.T.);+#6471 = ORIENTED_EDGE('',*,*,#6447,.T.);+#6472 = ORIENTED_EDGE('',*,*,#6320,.T.);+#6473 = ORIENTED_EDGE('',*,*,#6474,.F.);+#6474 = EDGE_CURVE('',#6043,#6321,#6475,.T.);+#6475 = SURFACE_CURVE('',#6476,(#6480,#6487),.PCURVE_S1.);+#6476 = LINE('',#6477,#6478);+#6477 = CARTESIAN_POINT('',(0.341808853761,-7.370327706877E-03,1.2500001+ ));+#6478 = VECTOR('',#6479,1.);+#6479 = DIRECTION('',(-0.,-0.,-1.));+#6480 = PCURVE('',#6062,#6481);+#6481 = DEFINITIONAL_REPRESENTATION('',(#6482),#6486);+#6482 = LINE('',#6483,#6484);+#6483 = CARTESIAN_POINT('',(1.,0.));+#6484 = VECTOR('',#6485,1.);+#6485 = DIRECTION('',(0.,-1.));+#6486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6487 = PCURVE('',#6098,#6488);+#6488 = DEFINITIONAL_REPRESENTATION('',(#6489),#6493);+#6489 = LINE('',#6490,#6491);+#6490 = CARTESIAN_POINT('',(0.,0.));+#6491 = VECTOR('',#6492,1.);+#6492 = DIRECTION('',(0.,-1.));+#6493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6494 = ADVANCED_FACE('',(#6495),#6098,.T.);+#6495 = FACE_BOUND('',#6496,.T.);+#6496 = EDGE_LOOP('',(#6497,#6498,#6499,#6500));+#6497 = ORIENTED_EDGE('',*,*,#6078,.T.);+#6498 = ORIENTED_EDGE('',*,*,#6474,.T.);+#6499 = ORIENTED_EDGE('',*,*,#6343,.T.);+#6500 = ORIENTED_EDGE('',*,*,#6501,.F.);+#6501 = EDGE_CURVE('',#6079,#6344,#6502,.T.);+#6502 = SURFACE_CURVE('',#6503,(#6507,#6514),.PCURVE_S1.);+#6503 = LINE('',#6504,#6505);+#6504 = CARTESIAN_POINT('',(0.334398900636,-4.35879595568E-03,1.2500001)+ );+#6505 = VECTOR('',#6506,1.);+#6506 = DIRECTION('',(-0.,-0.,-1.));+#6507 = PCURVE('',#6098,#6508);+#6508 = DEFINITIONAL_REPRESENTATION('',(#6509),#6513);+#6509 = LINE('',#6510,#6511);+#6510 = CARTESIAN_POINT('',(1.,0.));+#6511 = VECTOR('',#6512,1.);+#6512 = DIRECTION('',(0.,-1.));+#6513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6514 = PCURVE('',#6132,#6515);+#6515 = DEFINITIONAL_REPRESENTATION('',(#6516),#6520);+#6516 = LINE('',#6517,#6518);+#6517 = CARTESIAN_POINT('',(0.,0.));+#6518 = VECTOR('',#6519,1.);+#6519 = DIRECTION('',(0.,-1.));+#6520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6521 = ADVANCED_FACE('',(#6522),#6132,.T.);+#6522 = FACE_BOUND('',#6523,.T.);+#6523 = EDGE_LOOP('',(#6524,#6525,#6526,#6527));+#6524 = ORIENTED_EDGE('',*,*,#6114,.T.);+#6525 = ORIENTED_EDGE('',*,*,#6501,.T.);+#6526 = ORIENTED_EDGE('',*,*,#6366,.T.);+#6527 = ORIENTED_EDGE('',*,*,#6528,.F.);+#6528 = EDGE_CURVE('',#5863,#6228,#6529,.T.);+#6529 = SURFACE_CURVE('',#6530,(#6534,#6541),.PCURVE_S1.);+#6530 = LINE('',#6531,#6532);+#6531 = CARTESIAN_POINT('',(0.331426994303,3.249284257871E-03,1.2500001)+ );+#6532 = VECTOR('',#6533,1.);+#6533 = DIRECTION('',(-0.,-0.,-1.));+#6534 = PCURVE('',#6132,#6535);+#6535 = DEFINITIONAL_REPRESENTATION('',(#6536),#6540);+#6536 = LINE('',#6537,#6538);+#6537 = CARTESIAN_POINT('',(1.,0.));+#6538 = VECTOR('',#6539,1.);+#6539 = DIRECTION('',(0.,-1.));+#6540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6541 = PCURVE('',#5882,#6542);+#6542 = DEFINITIONAL_REPRESENTATION('',(#6543),#6547);+#6543 = LINE('',#6544,#6545);+#6544 = CARTESIAN_POINT('',(0.,0.));+#6545 = VECTOR('',#6546,1.);+#6546 = DIRECTION('',(0.,-1.));+#6547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6548 = ADVANCED_FACE('',(#6549),#5882,.T.);+#6549 = FACE_BOUND('',#6550,.T.);+#6550 = EDGE_LOOP('',(#6551,#6552,#6553,#6554));+#6551 = ORIENTED_EDGE('',*,*,#5860,.T.);+#6552 = ORIENTED_EDGE('',*,*,#6528,.T.);+#6553 = ORIENTED_EDGE('',*,*,#6227,.T.);+#6554 = ORIENTED_EDGE('',*,*,#6152,.F.);+#6555 = ADVANCED_FACE('',(#6556),#5511,.T.);+#6556 = FACE_BOUND('',#6557,.T.);+#6557 = EDGE_LOOP('',(#6558,#6559,#6580,#6581));+#6558 = ORIENTED_EDGE('',*,*,#5830,.T.);+#6559 = ORIENTED_EDGE('',*,*,#6560,.T.);+#6560 = EDGE_CURVE('',#5802,#5466,#6561,.T.);+#6561 = SURFACE_CURVE('',#6562,(#6566,#6573),.PCURVE_S1.);+#6562 = LINE('',#6563,#6564);+#6563 = CARTESIAN_POINT('',(0.364236840224,2.853030080082E-03,1.2500001)+ );+#6564 = VECTOR('',#6565,1.);+#6565 = DIRECTION('',(-0.,-0.,-1.));+#6566 = PCURVE('',#5511,#6567);+#6567 = DEFINITIONAL_REPRESENTATION('',(#6568),#6572);+#6568 = LINE('',#6569,#6570);+#6569 = CARTESIAN_POINT('',(0.,0.));+#6570 = VECTOR('',#6571,1.);+#6571 = DIRECTION('',(0.,-1.));+#6572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6573 = PCURVE('',#5481,#6574);+#6574 = DEFINITIONAL_REPRESENTATION('',(#6575),#6579);+#6575 = LINE('',#6576,#6577);+#6576 = CARTESIAN_POINT('',(1.,0.));+#6577 = VECTOR('',#6578,1.);+#6578 = DIRECTION('',(0.,-1.));+#6579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6580 = ORIENTED_EDGE('',*,*,#5495,.T.);+#6581 = ORIENTED_EDGE('',*,*,#5592,.F.);+#6582 = ADVANCED_FACE('',(#6583),#5481,.T.);+#6583 = FACE_BOUND('',#6584,.T.);+#6584 = EDGE_LOOP('',(#6585,#6586,#6607,#6608));+#6585 = ORIENTED_EDGE('',*,*,#5801,.T.);+#6586 = ORIENTED_EDGE('',*,*,#6587,.T.);+#6587 = EDGE_CURVE('',#5764,#5436,#6588,.T.);+#6588 = SURFACE_CURVE('',#6589,(#6593,#6600),.PCURVE_S1.);+#6589 = LINE('',#6590,#6591);+#6590 = CARTESIAN_POINT('',(0.358728907152,-3.376085594763E-02,1.2500001+ ));+#6591 = VECTOR('',#6592,1.);+#6592 = DIRECTION('',(-0.,-0.,-1.));+#6593 = PCURVE('',#5481,#6594);+#6594 = DEFINITIONAL_REPRESENTATION('',(#6595),#6599);+#6595 = LINE('',#6596,#6597);+#6596 = CARTESIAN_POINT('',(0.,0.));+#6597 = VECTOR('',#6598,1.);+#6598 = DIRECTION('',(0.,-1.));+#6599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6600 = PCURVE('',#5451,#6601);+#6601 = DEFINITIONAL_REPRESENTATION('',(#6602),#6606);+#6602 = LINE('',#6603,#6604);+#6603 = CARTESIAN_POINT('',(1.,0.));+#6604 = VECTOR('',#6605,1.);+#6605 = DIRECTION('',(0.,-1.));+#6606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6607 = ORIENTED_EDGE('',*,*,#5465,.T.);+#6608 = ORIENTED_EDGE('',*,*,#6560,.F.);+#6609 = ADVANCED_FACE('',(#6610),#5451,.T.);+#6610 = FACE_BOUND('',#6611,.T.);+#6611 = EDGE_LOOP('',(#6612,#6613,#6634,#6635));+#6612 = ORIENTED_EDGE('',*,*,#5763,.T.);+#6613 = ORIENTED_EDGE('',*,*,#6614,.T.);+#6614 = EDGE_CURVE('',#5735,#5406,#6615,.T.);+#6615 = SURFACE_CURVE('',#6616,(#6620,#6627),.PCURVE_S1.);+#6616 = LINE('',#6617,#6618);+#6617 = CARTESIAN_POINT('',(0.341967355432,-4.580698295242E-02,1.2500001+ ));+#6618 = VECTOR('',#6619,1.);+#6619 = DIRECTION('',(-0.,-0.,-1.));+#6620 = PCURVE('',#5451,#6621);+#6621 = DEFINITIONAL_REPRESENTATION('',(#6622),#6626);+#6622 = LINE('',#6623,#6624);+#6623 = CARTESIAN_POINT('',(0.,0.));+#6624 = VECTOR('',#6625,1.);+#6625 = DIRECTION('',(0.,-1.));+#6626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6627 = PCURVE('',#5421,#6628);+#6628 = DEFINITIONAL_REPRESENTATION('',(#6629),#6633);+#6629 = LINE('',#6630,#6631);+#6630 = CARTESIAN_POINT('',(1.,0.));+#6631 = VECTOR('',#6632,1.);+#6632 = DIRECTION('',(0.,-1.));+#6633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6634 = ORIENTED_EDGE('',*,*,#5435,.T.);+#6635 = ORIENTED_EDGE('',*,*,#6587,.F.);+#6636 = ADVANCED_FACE('',(#6637),#5421,.T.);+#6637 = FACE_BOUND('',#6638,.T.);+#6638 = EDGE_LOOP('',(#6639,#6640,#6661,#6662));+#6639 = ORIENTED_EDGE('',*,*,#5734,.T.);+#6640 = ORIENTED_EDGE('',*,*,#6641,.T.);+#6641 = EDGE_CURVE('',#5706,#5376,#6642,.T.);+#6642 = SURFACE_CURVE('',#6643,(#6647,#6654),.PCURVE_S1.);+#6643 = LINE('',#6644,#6645);+#6644 = CARTESIAN_POINT('',(0.325285054547,-3.376085594763E-02,1.2500001+ ));+#6645 = VECTOR('',#6646,1.);+#6646 = DIRECTION('',(-0.,-0.,-1.));+#6647 = PCURVE('',#5421,#6648);+#6648 = DEFINITIONAL_REPRESENTATION('',(#6649),#6653);+#6649 = LINE('',#6650,#6651);+#6650 = CARTESIAN_POINT('',(0.,0.));+#6651 = VECTOR('',#6652,1.);+#6652 = DIRECTION('',(0.,-1.));+#6653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6654 = PCURVE('',#5391,#6655);+#6655 = DEFINITIONAL_REPRESENTATION('',(#6656),#6660);+#6656 = LINE('',#6657,#6658);+#6657 = CARTESIAN_POINT('',(1.,0.));+#6658 = VECTOR('',#6659,1.);+#6659 = DIRECTION('',(0.,-1.));+#6660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6661 = ORIENTED_EDGE('',*,*,#5405,.T.);+#6662 = ORIENTED_EDGE('',*,*,#6614,.F.);+#6663 = ADVANCED_FACE('',(#6664),#5391,.T.);+#6664 = FACE_BOUND('',#6665,.T.);+#6665 = EDGE_LOOP('',(#6666,#6667,#6688,#6689));+#6666 = ORIENTED_EDGE('',*,*,#5705,.T.);+#6667 = ORIENTED_EDGE('',*,*,#6668,.T.);+#6668 = EDGE_CURVE('',#5677,#5346,#6669,.T.);+#6669 = SURFACE_CURVE('',#6670,(#6674,#6681),.PCURVE_S1.);+#6670 = LINE('',#6671,#6672);+#6671 = CARTESIAN_POINT('',(0.319777121476,2.853030080082E-03,1.2500001)+ );+#6672 = VECTOR('',#6673,1.);+#6673 = DIRECTION('',(-0.,-0.,-1.));+#6674 = PCURVE('',#5391,#6675);+#6675 = DEFINITIONAL_REPRESENTATION('',(#6676),#6680);+#6676 = LINE('',#6677,#6678);+#6677 = CARTESIAN_POINT('',(0.,0.));+#6678 = VECTOR('',#6679,1.);+#6679 = DIRECTION('',(0.,-1.));+#6680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6681 = PCURVE('',#5361,#6682);+#6682 = DEFINITIONAL_REPRESENTATION('',(#6683),#6687);+#6683 = LINE('',#6684,#6685);+#6684 = CARTESIAN_POINT('',(1.,0.));+#6685 = VECTOR('',#6686,1.);+#6686 = DIRECTION('',(0.,-1.));+#6687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6688 = ORIENTED_EDGE('',*,*,#5375,.T.);+#6689 = ORIENTED_EDGE('',*,*,#6641,.F.);+#6690 = ADVANCED_FACE('',(#6691),#5361,.T.);+#6691 = FACE_BOUND('',#6692,.T.);+#6692 = EDGE_LOOP('',(#6693,#6694,#6715,#6716));+#6693 = ORIENTED_EDGE('',*,*,#5676,.T.);+#6694 = ORIENTED_EDGE('',*,*,#6695,.T.);+#6695 = EDGE_CURVE('',#5639,#5316,#6696,.T.);+#6696 = SURFACE_CURVE('',#6697,(#6701,#6708),.PCURVE_S1.);+#6697 = LINE('',#6698,#6699);+#6698 = CARTESIAN_POINT('',(0.325285054547,3.954616694335E-02,1.2500001)+ );+#6699 = VECTOR('',#6700,1.);+#6700 = DIRECTION('',(-0.,-0.,-1.));+#6701 = PCURVE('',#5361,#6702);+#6702 = DEFINITIONAL_REPRESENTATION('',(#6703),#6707);+#6703 = LINE('',#6704,#6705);+#6704 = CARTESIAN_POINT('',(0.,0.));+#6705 = VECTOR('',#6706,1.);+#6706 = DIRECTION('',(0.,-1.));+#6707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6708 = PCURVE('',#5331,#6709);+#6709 = DEFINITIONAL_REPRESENTATION('',(#6710),#6714);+#6710 = LINE('',#6711,#6712);+#6711 = CARTESIAN_POINT('',(1.,0.));+#6712 = VECTOR('',#6713,1.);+#6713 = DIRECTION('',(0.,-1.));+#6714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6715 = ORIENTED_EDGE('',*,*,#5345,.T.);+#6716 = ORIENTED_EDGE('',*,*,#6668,.F.);+#6717 = ADVANCED_FACE('',(#6718),#5331,.T.);+#6718 = FACE_BOUND('',#6719,.T.);+#6719 = EDGE_LOOP('',(#6720,#6721,#6722,#6723));+#6720 = ORIENTED_EDGE('',*,*,#5638,.T.);+#6721 = ORIENTED_EDGE('',*,*,#5614,.T.);+#6722 = ORIENTED_EDGE('',*,*,#5313,.T.);+#6723 = ORIENTED_EDGE('',*,*,#6695,.F.);+#6724 = ADVANCED_FACE('',(#6725),#5013,.T.);+#6725 = FACE_BOUND('',#6726,.T.);+#6726 = EDGE_LOOP('',(#6727,#6728,#6749,#6750));+#6727 = ORIENTED_EDGE('',*,*,#4993,.T.);+#6728 = ORIENTED_EDGE('',*,*,#6729,.T.);+#6729 = EDGE_CURVE('',#4958,#5267,#6730,.T.);+#6730 = SURFACE_CURVE('',#6731,(#6735,#6742),.PCURVE_S1.);+#6731 = LINE('',#6732,#6733);+#6732 = CARTESIAN_POINT('',(0.303689201858,2.853030080082E-03,1.2500001)+ );+#6733 = VECTOR('',#6734,1.);+#6734 = DIRECTION('',(-0.,-0.,-1.));+#6735 = PCURVE('',#5013,#6736);+#6736 = DEFINITIONAL_REPRESENTATION('',(#6737),#6741);+#6737 = LINE('',#6738,#6739);+#6738 = CARTESIAN_POINT('',(0.,0.));+#6739 = VECTOR('',#6740,1.);+#6740 = DIRECTION('',(0.,-1.));+#6741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6742 = PCURVE('',#4977,#6743);+#6743 = DEFINITIONAL_REPRESENTATION('',(#6744),#6748);+#6744 = LINE('',#6745,#6746);+#6745 = CARTESIAN_POINT('',(1.,0.));+#6746 = VECTOR('',#6747,1.);+#6747 = DIRECTION('',(0.,-1.));+#6748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6749 = ORIENTED_EDGE('',*,*,#5289,.T.);+#6750 = ORIENTED_EDGE('',*,*,#5076,.F.);+#6751 = ADVANCED_FACE('',(#6752),#4977,.T.);+#6752 = FACE_BOUND('',#6753,.T.);+#6753 = EDGE_LOOP('',(#6754,#6755,#6776,#6777));+#6754 = ORIENTED_EDGE('',*,*,#4957,.T.);+#6755 = ORIENTED_EDGE('',*,*,#6756,.T.);+#6756 = EDGE_CURVE('',#4922,#5244,#6757,.T.);+#6757 = SURFACE_CURVE('',#6758,(#6762,#6769),.PCURVE_S1.);+#6758 = LINE('',#6759,#6760);+#6759 = CARTESIAN_POINT('',(0.313357803796,-4.295395287234E-02,1.2500001+ ));+#6760 = VECTOR('',#6761,1.);+#6761 = DIRECTION('',(-0.,-0.,-1.));+#6762 = PCURVE('',#4977,#6763);+#6763 = DEFINITIONAL_REPRESENTATION('',(#6764),#6768);+#6764 = LINE('',#6765,#6766);+#6765 = CARTESIAN_POINT('',(0.,0.));+#6766 = VECTOR('',#6767,1.);+#6767 = DIRECTION('',(0.,-1.));+#6768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6769 = PCURVE('',#4941,#6770);+#6770 = DEFINITIONAL_REPRESENTATION('',(#6771),#6775);+#6771 = LINE('',#6772,#6773);+#6772 = CARTESIAN_POINT('',(1.,0.));+#6773 = VECTOR('',#6774,1.);+#6774 = DIRECTION('',(0.,-1.));+#6775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6776 = ORIENTED_EDGE('',*,*,#5266,.T.);+#6777 = ORIENTED_EDGE('',*,*,#6729,.F.);+#6778 = ADVANCED_FACE('',(#6779),#4941,.T.);+#6779 = FACE_BOUND('',#6780,.T.);+#6780 = EDGE_LOOP('',(#6781,#6782,#6803,#6804));+#6781 = ORIENTED_EDGE('',*,*,#4921,.T.);+#6782 = ORIENTED_EDGE('',*,*,#6783,.T.);+#6783 = EDGE_CURVE('',#4886,#5221,#6784,.T.);+#6784 = SURFACE_CURVE('',#6785,(#6789,#6796),.PCURVE_S1.);+#6785 = LINE('',#6786,#6787);+#6786 = CARTESIAN_POINT('',(0.341967355432,-5.848711664167E-02,1.2500001+ ));+#6787 = VECTOR('',#6788,1.);+#6788 = DIRECTION('',(-0.,-0.,-1.));+#6789 = PCURVE('',#4941,#6790);+#6790 = DEFINITIONAL_REPRESENTATION('',(#6791),#6795);+#6791 = LINE('',#6792,#6793);+#6792 = CARTESIAN_POINT('',(0.,0.));+#6793 = VECTOR('',#6794,1.);+#6794 = DIRECTION('',(0.,-1.));+#6795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6796 = PCURVE('',#4905,#6797);+#6797 = DEFINITIONAL_REPRESENTATION('',(#6798),#6802);+#6798 = LINE('',#6799,#6800);+#6799 = CARTESIAN_POINT('',(1.,0.));+#6800 = VECTOR('',#6801,1.);+#6801 = DIRECTION('',(0.,-1.));+#6802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6803 = ORIENTED_EDGE('',*,*,#5243,.T.);+#6804 = ORIENTED_EDGE('',*,*,#6756,.F.);+#6805 = ADVANCED_FACE('',(#6806),#4905,.T.);+#6806 = FACE_BOUND('',#6807,.T.);+#6807 = EDGE_LOOP('',(#6808,#6809,#6830,#6831));+#6808 = ORIENTED_EDGE('',*,*,#4885,.T.);+#6809 = ORIENTED_EDGE('',*,*,#6810,.T.);+#6810 = EDGE_CURVE('',#4850,#5198,#6811,.T.);+#6811 = SURFACE_CURVE('',#6812,(#6816,#6823),.PCURVE_S1.);+#6812 = LINE('',#6813,#6814);+#6813 = CARTESIAN_POINT('',(0.370616532486,-4.295395287234E-02,1.2500001+ ));+#6814 = VECTOR('',#6815,1.);+#6815 = DIRECTION('',(-0.,-0.,-1.));+#6816 = PCURVE('',#4905,#6817);+#6817 = DEFINITIONAL_REPRESENTATION('',(#6818),#6822);+#6818 = LINE('',#6819,#6820);+#6819 = CARTESIAN_POINT('',(0.,0.));+#6820 = VECTOR('',#6821,1.);+#6821 = DIRECTION('',(0.,-1.));+#6822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6823 = PCURVE('',#4869,#6824);+#6824 = DEFINITIONAL_REPRESENTATION('',(#6825),#6829);+#6825 = LINE('',#6826,#6827);+#6826 = CARTESIAN_POINT('',(1.,0.));+#6827 = VECTOR('',#6828,1.);+#6828 = DIRECTION('',(0.,-1.));+#6829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6830 = ORIENTED_EDGE('',*,*,#5220,.T.);+#6831 = ORIENTED_EDGE('',*,*,#6783,.F.);+#6832 = ADVANCED_FACE('',(#6833),#4869,.T.);+#6833 = FACE_BOUND('',#6834,.T.);+#6834 = EDGE_LOOP('',(#6835,#6836,#6857,#6858));+#6835 = ORIENTED_EDGE('',*,*,#4849,.T.);+#6836 = ORIENTED_EDGE('',*,*,#6837,.T.);+#6837 = EDGE_CURVE('',#4814,#5175,#6838,.T.);+#6838 = SURFACE_CURVE('',#6839,(#6843,#6850),.PCURVE_S1.);+#6839 = LINE('',#6840,#6841);+#6840 = CARTESIAN_POINT('',(0.380324759842,2.853030080082E-03,1.2500001)+ );+#6841 = VECTOR('',#6842,1.);+#6842 = DIRECTION('',(-0.,-0.,-1.));+#6843 = PCURVE('',#4869,#6844);+#6844 = DEFINITIONAL_REPRESENTATION('',(#6845),#6849);+#6845 = LINE('',#6846,#6847);+#6846 = CARTESIAN_POINT('',(0.,0.));+#6847 = VECTOR('',#6848,1.);+#6848 = DIRECTION('',(0.,-1.));+#6849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6850 = PCURVE('',#4833,#6851);+#6851 = DEFINITIONAL_REPRESENTATION('',(#6852),#6856);+#6852 = LINE('',#6853,#6854);+#6853 = CARTESIAN_POINT('',(1.,0.));+#6854 = VECTOR('',#6855,1.);+#6855 = DIRECTION('',(0.,-1.));+#6856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6857 = ORIENTED_EDGE('',*,*,#5197,.T.);+#6858 = ORIENTED_EDGE('',*,*,#6810,.F.);+#6859 = ADVANCED_FACE('',(#6860),#4833,.T.);+#6860 = FACE_BOUND('',#6861,.T.);+#6861 = EDGE_LOOP('',(#6862,#6863,#6884,#6885));+#6862 = ORIENTED_EDGE('',*,*,#4813,.T.);+#6863 = ORIENTED_EDGE('',*,*,#6864,.T.);+#6864 = EDGE_CURVE('',#4776,#5152,#6865,.T.);+#6865 = SURFACE_CURVE('',#6866,(#6870,#6877),.PCURVE_S1.);+#6866 = LINE('',#6867,#6868);+#6867 = CARTESIAN_POINT('',(0.370616532486,4.873926386806E-02,1.2500001)+ );+#6868 = VECTOR('',#6869,1.);+#6869 = DIRECTION('',(-0.,-0.,-1.));+#6870 = PCURVE('',#4833,#6871);+#6871 = DEFINITIONAL_REPRESENTATION('',(#6872),#6876);+#6872 = LINE('',#6873,#6874);+#6873 = CARTESIAN_POINT('',(0.,0.));+#6874 = VECTOR('',#6875,1.);+#6875 = DIRECTION('',(0.,-1.));+#6876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6877 = PCURVE('',#4797,#6878);+#6878 = DEFINITIONAL_REPRESENTATION('',(#6879),#6883);+#6879 = LINE('',#6880,#6881);+#6880 = CARTESIAN_POINT('',(1.,0.));+#6881 = VECTOR('',#6882,1.);+#6882 = DIRECTION('',(0.,-1.));+#6883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6884 = ORIENTED_EDGE('',*,*,#5174,.T.);+#6885 = ORIENTED_EDGE('',*,*,#6837,.F.);+#6886 = ADVANCED_FACE('',(#6887),#4797,.T.);+#6887 = FACE_BOUND('',#6888,.T.);+#6888 = EDGE_LOOP('',(#6889,#6890,#6891,#6892));+#6889 = ORIENTED_EDGE('',*,*,#4775,.T.);+#6890 = ORIENTED_EDGE('',*,*,#5127,.T.);+#6891 = ORIENTED_EDGE('',*,*,#5151,.T.);+#6892 = ORIENTED_EDGE('',*,*,#6864,.F.);+#6893 = ADVANCED_FACE('',(#6894),#4754,.T.);+#6894 = FACE_BOUND('',#6895,.T.);+#6895 = EDGE_LOOP('',(#6896,#6897,#6920,#6948));+#6896 = ORIENTED_EDGE('',*,*,#4730,.T.);+#6897 = ORIENTED_EDGE('',*,*,#6898,.T.);+#6898 = EDGE_CURVE('',#4695,#6899,#6901,.T.);+#6899 = VERTEX_POINT('',#6900);+#6900 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.1500001)+ );+#6901 = SURFACE_CURVE('',#6902,(#6906,#6913),.PCURVE_S1.);+#6902 = LINE('',#6903,#6904);+#6903 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.2500001)+ );+#6904 = VECTOR('',#6905,1.);+#6905 = DIRECTION('',(-0.,-0.,-1.));+#6906 = PCURVE('',#4754,#6907);+#6907 = DEFINITIONAL_REPRESENTATION('',(#6908),#6912);+#6908 = LINE('',#6909,#6910);+#6909 = CARTESIAN_POINT('',(0.,0.));+#6910 = VECTOR('',#6911,1.);+#6911 = DIRECTION('',(0.,-1.));+#6912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6913 = PCURVE('',#4714,#6914);+#6914 = DEFINITIONAL_REPRESENTATION('',(#6915),#6919);+#6915 = LINE('',#6916,#6917);+#6916 = CARTESIAN_POINT('',(1.,0.));+#6917 = VECTOR('',#6918,1.);+#6918 = DIRECTION('',(0.,-1.));+#6919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6920 = ORIENTED_EDGE('',*,*,#6921,.T.);+#6921 = EDGE_CURVE('',#6899,#6922,#6924,.T.);+#6922 = VERTEX_POINT('',#6923);+#6923 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.1500001)+ );+#6924 = SURFACE_CURVE('',#6925,(#6929,#6936),.PCURVE_S1.);+#6925 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6926,#6927,#6928),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6926 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.1500001)+ );+#6927 = CARTESIAN_POINT('',(0.225310125491,6.427242763739E-02,1.1500001)+ );+#6928 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.1500001)+ );+#6929 = PCURVE('',#4754,#6930);+#6930 = DEFINITIONAL_REPRESENTATION('',(#6931),#6935);+#6931 = LINE('',#6932,#6933);+#6932 = CARTESIAN_POINT('',(0.,-0.1));+#6933 = VECTOR('',#6934,1.);+#6934 = DIRECTION('',(1.,0.));+#6935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6936 = PCURVE('',#6937,#6942);+#6937 = PLANE('',#6938);+#6938 = AXIS2_PLACEMENT_3D('',#6939,#6940,#6941);+#6939 = CARTESIAN_POINT('',(0.195432560486,-5.618884241049E-02,1.1500001+ ));+#6940 = DIRECTION('',(0.,0.,1.));+#6941 = DIRECTION('',(1.,0.,0.));+#6942 = DEFINITIONAL_REPRESENTATION('',(#6943),#6947);+#6943 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6944,#6945,#6946),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6944 = CARTESIAN_POINT('',(2.020896306724E-02,0.104928106279));+#6945 = CARTESIAN_POINT('',(2.98775650053E-02,0.120461270048));+#6946 = CARTESIAN_POINT('',(4.881851470362E-02,0.120461270048));+#6947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6948 = ORIENTED_EDGE('',*,*,#6949,.F.);+#6949 = EDGE_CURVE('',#4479,#6922,#6950,.T.);+#6950 = SURFACE_CURVE('',#6951,(#6955,#6962),.PCURVE_S1.);+#6951 = LINE('',#6952,#6953);+#6952 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.2500001)+ );+#6953 = VECTOR('',#6954,1.);+#6954 = DIRECTION('',(-0.,-0.,-1.));+#6955 = PCURVE('',#4754,#6956);+#6956 = DEFINITIONAL_REPRESENTATION('',(#6957),#6961);+#6957 = LINE('',#6958,#6959);+#6958 = CARTESIAN_POINT('',(1.,0.));+#6959 = VECTOR('',#6960,1.);+#6960 = DIRECTION('',(0.,-1.));+#6961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6962 = PCURVE('',#4498,#6963);+#6963 = DEFINITIONAL_REPRESENTATION('',(#6964),#6968);+#6964 = LINE('',#6965,#6966);+#6965 = CARTESIAN_POINT('',(0.,0.));+#6966 = VECTOR('',#6967,1.);+#6967 = DIRECTION('',(0.,-1.));+#6968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6969 = ADVANCED_FACE('',(#6970,#7132),#6937,.T.);+#6970 = FACE_BOUND('',#6971,.F.);+#6971 = EDGE_LOOP('',(#6972,#6995,#7018,#7041,#7064,#7087,#7110,#7131));+#6972 = ORIENTED_EDGE('',*,*,#6973,.T.);+#6973 = EDGE_CURVE('',#6922,#6974,#6976,.T.);+#6974 = VERTEX_POINT('',#6975);+#6975 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.1500001)+ );+#6976 = SURFACE_CURVE('',#6977,(#6981,#6988),.PCURVE_S1.);+#6977 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6978,#6979,#6980),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6978 = CARTESIAN_POINT('',(0.244251075189,6.427242763739E-02,1.1500001)+ );+#6979 = CARTESIAN_POINT('',(0.263192024888,6.427242763739E-02,1.1500001)+ );+#6980 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.1500001)+ );+#6981 = PCURVE('',#6937,#6982);+#6982 = DEFINITIONAL_REPRESENTATION('',(#6983),#6987);+#6983 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6984,#6985,#6986),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6984 = CARTESIAN_POINT('',(4.881851470362E-02,0.120461270048));+#6985 = CARTESIAN_POINT('',(6.775946440194E-02,0.120461270048));+#6986 = CARTESIAN_POINT('',(7.746769175777E-02,0.104928106279));+#6987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6988 = PCURVE('',#4498,#6989);+#6989 = DEFINITIONAL_REPRESENTATION('',(#6990),#6994);+#6990 = LINE('',#6991,#6992);+#6991 = CARTESIAN_POINT('',(0.,-0.1));+#6992 = VECTOR('',#6993,1.);+#6993 = DIRECTION('',(1.,0.));+#6994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6995 = ORIENTED_EDGE('',*,*,#6996,.T.);+#6996 = EDGE_CURVE('',#6974,#6997,#6999,.T.);+#6997 = VERTEX_POINT('',#6998);+#6998 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.1500001)+ );+#6999 = SURFACE_CURVE('',#7000,(#7004,#7011),.PCURVE_S1.);+#7000 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7001,#7002,#7003),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7001 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.1500001)+ );+#7002 = CARTESIAN_POINT('',(0.282608479599,3.320610009873E-02,1.1500001)+ );+#7003 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.1500001)+ );+#7004 = PCURVE('',#6937,#7005);+#7005 = DEFINITIONAL_REPRESENTATION('',(#7006),#7010);+#7006 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7007,#7008,#7009),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7007 = CARTESIAN_POINT('',(7.746769175777E-02,0.104928106279));+#7008 = CARTESIAN_POINT('',(8.71759191136E-02,8.939494250922E-02));+#7009 = CARTESIAN_POINT('',(8.71759191136E-02,5.904187249058E-02));+#7010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7011 = PCURVE('',#4534,#7012);+#7012 = DEFINITIONAL_REPRESENTATION('',(#7013),#7017);+#7013 = LINE('',#7014,#7015);+#7014 = CARTESIAN_POINT('',(0.,-0.1));+#7015 = VECTOR('',#7016,1.);+#7016 = DIRECTION('',(1.,0.));+#7017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7018 = ORIENTED_EDGE('',*,*,#7019,.T.);+#7019 = EDGE_CURVE('',#6997,#7020,#7022,.T.);+#7020 = VERTEX_POINT('',#7021);+#7021 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.1500001+ ));+#7022 = SURFACE_CURVE('',#7023,(#7027,#7034),.PCURVE_S1.);+#7023 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7024,#7025,#7026),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7024 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.1500001)+ );+#7025 = CARTESIAN_POINT('',(0.282608479599,-2.742078910301E-02,1.1500001+ ));+#7026 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.1500001+ ));+#7027 = PCURVE('',#6937,#7028);+#7028 = DEFINITIONAL_REPRESENTATION('',(#7029),#7033);+#7029 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7030,#7031,#7032),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7030 = CARTESIAN_POINT('',(8.71759191136E-02,5.904187249058E-02));+#7031 = CARTESIAN_POINT('',(8.71759191136E-02,2.876805330749E-02));+#7032 = CARTESIAN_POINT('',(7.746769175777E-02,1.323488953816E-02));+#7033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7034 = PCURVE('',#4570,#7035);+#7035 = DEFINITIONAL_REPRESENTATION('',(#7036),#7040);+#7036 = LINE('',#7037,#7038);+#7037 = CARTESIAN_POINT('',(0.,-0.1));+#7038 = VECTOR('',#7039,1.);+#7039 = DIRECTION('',(1.,0.));+#7040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7041 = ORIENTED_EDGE('',*,*,#7042,.T.);+#7042 = EDGE_CURVE('',#7020,#7043,#7045,.T.);+#7043 = VERTEX_POINT('',#7044);+#7044 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.1500001+ ));+#7045 = SURFACE_CURVE('',#7046,(#7050,#7057),.PCURVE_S1.);+#7046 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7047,#7048,#7049),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7047 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.1500001+ ));+#7048 = CARTESIAN_POINT('',(0.263192024888,-5.848711664167E-02,1.1500001+ ));+#7049 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.1500001+ ));+#7050 = PCURVE('',#6937,#7051);+#7051 = DEFINITIONAL_REPRESENTATION('',(#7052),#7056);+#7052 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7053,#7054,#7055),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7053 = CARTESIAN_POINT('',(7.746769175777E-02,1.323488953816E-02));+#7054 = CARTESIAN_POINT('',(6.775946440194E-02,-2.298274231177E-03));+#7055 = CARTESIAN_POINT('',(4.881851470362E-02,-2.298274231177E-03));+#7056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7057 = PCURVE('',#4606,#7058);+#7058 = DEFINITIONAL_REPRESENTATION('',(#7059),#7063);+#7059 = LINE('',#7060,#7061);+#7060 = CARTESIAN_POINT('',(0.,-0.1));+#7061 = VECTOR('',#7062,1.);+#7062 = DIRECTION('',(1.,0.));+#7063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7064 = ORIENTED_EDGE('',*,*,#7065,.T.);+#7065 = EDGE_CURVE('',#7043,#7066,#7068,.T.);+#7066 = VERTEX_POINT('',#7067);+#7067 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.1500001+ ));+#7068 = SURFACE_CURVE('',#7069,(#7073,#7080),.PCURVE_S1.);+#7069 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7070,#7071,#7072),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7070 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.1500001+ ));+#7071 = CARTESIAN_POINT('',(0.225310125491,-5.848711664167E-02,1.1500001+ ));+#7072 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.1500001+ ));+#7073 = PCURVE('',#6937,#7074);+#7074 = DEFINITIONAL_REPRESENTATION('',(#7075),#7079);+#7075 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7076,#7077,#7078),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7076 = CARTESIAN_POINT('',(4.881851470362E-02,-2.298274231177E-03));+#7077 = CARTESIAN_POINT('',(2.98775650053E-02,-2.298274231177E-03));+#7078 = CARTESIAN_POINT('',(2.020896306724E-02,1.323488953816E-02));+#7079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7080 = PCURVE('',#4642,#7081);+#7081 = DEFINITIONAL_REPRESENTATION('',(#7082),#7086);+#7082 = LINE('',#7083,#7084);+#7083 = CARTESIAN_POINT('',(0.,-0.1));+#7084 = VECTOR('',#7085,1.);+#7085 = DIRECTION('',(1.,0.));+#7086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7087 = ORIENTED_EDGE('',*,*,#7088,.T.);+#7088 = EDGE_CURVE('',#7066,#7089,#7091,.T.);+#7089 = VERTEX_POINT('',#7090);+#7090 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.1500001)+ );+#7091 = SURFACE_CURVE('',#7092,(#7096,#7103),.PCURVE_S1.);+#7092 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7093,#7094,#7095),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7093 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.1500001+ ));+#7094 = CARTESIAN_POINT('',(0.205972921615,-2.742078910301E-02,1.1500001+ ));+#7095 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.1500001)+ );+#7096 = PCURVE('',#6937,#7097);+#7097 = DEFINITIONAL_REPRESENTATION('',(#7098),#7102);+#7098 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7099,#7100,#7101),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7099 = CARTESIAN_POINT('',(2.020896306724E-02,1.323488953816E-02));+#7100 = CARTESIAN_POINT('',(1.054036112919E-02,2.876805330749E-02));+#7101 = CARTESIAN_POINT('',(1.054036112919E-02,5.904187249058E-02));+#7102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7103 = PCURVE('',#4678,#7104);+#7104 = DEFINITIONAL_REPRESENTATION('',(#7105),#7109);+#7105 = LINE('',#7106,#7107);+#7106 = CARTESIAN_POINT('',(0.,-0.1));+#7107 = VECTOR('',#7108,1.);+#7108 = DIRECTION('',(1.,0.));+#7109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7110 = ORIENTED_EDGE('',*,*,#7111,.T.);+#7111 = EDGE_CURVE('',#7089,#6899,#7112,.T.);+#7112 = SURFACE_CURVE('',#7113,(#7117,#7124),.PCURVE_S1.);+#7113 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7114,#7115,#7116),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7114 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.1500001)+ );+#7115 = CARTESIAN_POINT('',(0.205972921615,3.320610009873E-02,1.1500001)+ );+#7116 = CARTESIAN_POINT('',(0.215641523553,4.873926386806E-02,1.1500001)+ );+#7117 = PCURVE('',#6937,#7118);+#7118 = DEFINITIONAL_REPRESENTATION('',(#7119),#7123);+#7119 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7120,#7121,#7122),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7120 = CARTESIAN_POINT('',(1.054036112919E-02,5.904187249058E-02));+#7121 = CARTESIAN_POINT('',(1.054036112919E-02,8.939494250922E-02));+#7122 = CARTESIAN_POINT('',(2.020896306724E-02,0.104928106279));+#7123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7124 = PCURVE('',#4714,#7125);+#7125 = DEFINITIONAL_REPRESENTATION('',(#7126),#7130);+#7126 = LINE('',#7127,#7128);+#7127 = CARTESIAN_POINT('',(0.,-0.1));+#7128 = VECTOR('',#7129,1.);+#7129 = DIRECTION('',(1.,0.));+#7130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7131 = ORIENTED_EDGE('',*,*,#6921,.T.);+#7132 = FACE_BOUND('',#7133,.F.);+#7133 = EDGE_LOOP('',(#7134,#7166,#7196,#7226,#7256,#7286,#7316,#7346));+#7134 = ORIENTED_EDGE('',*,*,#7135,.T.);+#7135 = EDGE_CURVE('',#7136,#7138,#7140,.T.);+#7136 = VERTEX_POINT('',#7137);+#7137 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.1500001)+ );+#7138 = VERTEX_POINT('',#7139);+#7139 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.1500001)+ );+#7140 = SURFACE_CURVE('',#7141,(#7145,#7152),.PCURVE_S1.);+#7141 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7142,#7143,#7144),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7142 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.1500001)+ );+#7143 = CARTESIAN_POINT('',(0.233076707376,5.159229394814E-02,1.1500001)+ );+#7144 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.1500001)+ );+#7145 = PCURVE('',#6937,#7146);+#7146 = DEFINITIONAL_REPRESENTATION('',(#7147),#7151);+#7147 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7148,#7149,#7150),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7148 = CARTESIAN_POINT('',(4.881851470362E-02,0.107781136359));+#7149 = CARTESIAN_POINT('',(3.764414688996E-02,0.107781136359));+#7150 = CARTESIAN_POINT('',(3.21362138187E-02,9.573500935385E-02));+#7151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7152 = PCURVE('',#7153,#7160);+#7153 = SURFACE_OF_LINEAR_EXTRUSION('',#7154,#7158);+#7154 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7155,#7156,#7157),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7155 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.2500001)+ );+#7156 = CARTESIAN_POINT('',(0.233076707376,5.159229394814E-02,1.2500001)+ );+#7157 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.2500001)+ );+#7158 = VECTOR('',#7159,1.);+#7159 = DIRECTION('',(0.,0.,1.));+#7160 = DEFINITIONAL_REPRESENTATION('',(#7161),#7165);+#7161 = LINE('',#7162,#7163);+#7162 = CARTESIAN_POINT('',(0.,-0.1));+#7163 = VECTOR('',#7164,1.);+#7164 = DIRECTION('',(1.,0.));+#7165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7166 = ORIENTED_EDGE('',*,*,#7167,.T.);+#7167 = EDGE_CURVE('',#7138,#7168,#7170,.T.);+#7168 = VERTEX_POINT('',#7169);+#7169 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.1500001)+ );+#7170 = SURFACE_CURVE('',#7171,(#7175,#7182),.PCURVE_S1.);+#7171 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7172,#7173,#7174),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7172 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.1500001)+ );+#7173 = CARTESIAN_POINT('',(0.222060841233,2.750003993856E-02,1.1500001)+ );+#7174 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.1500001)+ );+#7175 = PCURVE('',#6937,#7176);+#7176 = DEFINITIONAL_REPRESENTATION('',(#7177),#7181);+#7177 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7178,#7179,#7180),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7178 = CARTESIAN_POINT('',(3.21362138187E-02,9.573500935385E-02));+#7179 = CARTESIAN_POINT('',(2.662828074743E-02,8.368888234906E-02));+#7180 = CARTESIAN_POINT('',(2.662828074743E-02,5.904187249058E-02));+#7181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7182 = PCURVE('',#7183,#7190);+#7183 = SURFACE_OF_LINEAR_EXTRUSION('',#7184,#7188);+#7184 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7185,#7186,#7187),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7185 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.2500001)+ );+#7186 = CARTESIAN_POINT('',(0.222060841233,2.750003993856E-02,1.2500001)+ );+#7187 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.2500001)+ );+#7188 = VECTOR('',#7189,1.);+#7189 = DIRECTION('',(0.,0.,1.));+#7190 = DEFINITIONAL_REPRESENTATION('',(#7191),#7195);+#7191 = LINE('',#7192,#7193);+#7192 = CARTESIAN_POINT('',(0.,-0.1));+#7193 = VECTOR('',#7194,1.);+#7194 = DIRECTION('',(1.,0.));+#7195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7196 = ORIENTED_EDGE('',*,*,#7197,.T.);+#7197 = EDGE_CURVE('',#7168,#7198,#7200,.T.);+#7198 = VERTEX_POINT('',#7199);+#7199 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.1500001+ ));+#7200 = SURFACE_CURVE('',#7201,(#7205,#7212),.PCURVE_S1.);+#7201 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7202,#7203,#7204),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7202 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.1500001)+ );+#7203 = CARTESIAN_POINT('',(0.222060841233,-2.171472894284E-02,1.1500001+ ));+#7204 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.1500001+ ));+#7205 = PCURVE('',#6937,#7206);+#7206 = DEFINITIONAL_REPRESENTATION('',(#7207),#7211);+#7207 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7208,#7209,#7210),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7208 = CARTESIAN_POINT('',(2.662828074743E-02,5.904187249058E-02));+#7209 = CARTESIAN_POINT('',(2.662828074743E-02,3.447411346765E-02));+#7210 = CARTESIAN_POINT('',(3.21362138187E-02,2.242798646286E-02));+#7211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7212 = PCURVE('',#7213,#7220);+#7213 = SURFACE_OF_LINEAR_EXTRUSION('',#7214,#7218);+#7214 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7215,#7216,#7217),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7215 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.2500001)+ );+#7216 = CARTESIAN_POINT('',(0.222060841233,-2.171472894284E-02,1.2500001+ ));+#7217 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.2500001+ ));+#7218 = VECTOR('',#7219,1.);+#7219 = DIRECTION('',(0.,0.,1.));+#7220 = DEFINITIONAL_REPRESENTATION('',(#7221),#7225);+#7221 = LINE('',#7222,#7223);+#7222 = CARTESIAN_POINT('',(0.,-0.1));+#7223 = VECTOR('',#7224,1.);+#7224 = DIRECTION('',(1.,0.));+#7225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7226 = ORIENTED_EDGE('',*,*,#7227,.T.);+#7227 = EDGE_CURVE('',#7198,#7228,#7230,.T.);+#7228 = VERTEX_POINT('',#7229);+#7229 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.1500001+ ));+#7230 = SURFACE_CURVE('',#7231,(#7235,#7242),.PCURVE_S1.);+#7231 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7232,#7233,#7234),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7232 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.1500001+ ));+#7233 = CARTESIAN_POINT('',(0.233076707376,-4.580698295242E-02,1.1500001+ ));+#7234 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.1500001+ ));+#7235 = PCURVE('',#6937,#7236);+#7236 = DEFINITIONAL_REPRESENTATION('',(#7237),#7241);+#7237 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7238,#7239,#7240),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7238 = CARTESIAN_POINT('',(3.21362138187E-02,2.242798646286E-02));+#7239 = CARTESIAN_POINT('',(3.764414688996E-02,1.038185945807E-02));+#7240 = CARTESIAN_POINT('',(4.881851470362E-02,1.038185945807E-02));+#7241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7242 = PCURVE('',#7243,#7250);+#7243 = SURFACE_OF_LINEAR_EXTRUSION('',#7244,#7248);+#7244 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7245,#7246,#7247),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7245 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.2500001+ ));+#7246 = CARTESIAN_POINT('',(0.233076707376,-4.580698295242E-02,1.2500001+ ));+#7247 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.2500001+ ));+#7248 = VECTOR('',#7249,1.);+#7249 = DIRECTION('',(0.,0.,1.));+#7250 = DEFINITIONAL_REPRESENTATION('',(#7251),#7255);+#7251 = LINE('',#7252,#7253);+#7252 = CARTESIAN_POINT('',(0.,-0.1));+#7253 = VECTOR('',#7254,1.);+#7254 = DIRECTION('',(1.,0.));+#7255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7256 = ORIENTED_EDGE('',*,*,#7257,.T.);+#7257 = EDGE_CURVE('',#7228,#7258,#7260,.T.);+#7258 = VERTEX_POINT('',#7259);+#7259 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.1500001)+ );+#7260 = SURFACE_CURVE('',#7261,(#7265,#7272),.PCURVE_S1.);+#7261 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7262,#7263,#7264),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7262 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.1500001+ ));+#7263 = CARTESIAN_POINT('',(0.255504693838,-4.580698295242E-02,1.1500001+ ));+#7264 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.1500001)+ );+#7265 = PCURVE('',#6937,#7266);+#7266 = DEFINITIONAL_REPRESENTATION('',(#7267),#7271);+#7267 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7268,#7269,#7270),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7268 = CARTESIAN_POINT('',(4.881851470362E-02,1.038185945807E-02));+#7269 = CARTESIAN_POINT('',(6.007213335283E-02,1.038185945807E-02));+#7270 = CARTESIAN_POINT('',(6.55800664241E-02,2.242798646286E-02));+#7271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7272 = PCURVE('',#7273,#7280);+#7273 = SURFACE_OF_LINEAR_EXTRUSION('',#7274,#7278);+#7274 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7275,#7276,#7277),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7275 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.2500001+ ));+#7276 = CARTESIAN_POINT('',(0.255504693838,-4.580698295242E-02,1.2500001+ ));+#7277 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.2500001)+ );+#7278 = VECTOR('',#7279,1.);+#7279 = DIRECTION('',(0.,0.,1.));+#7280 = DEFINITIONAL_REPRESENTATION('',(#7281),#7285);+#7281 = LINE('',#7282,#7283);+#7282 = CARTESIAN_POINT('',(0.,-0.1));+#7283 = VECTOR('',#7284,1.);+#7284 = DIRECTION('',(1.,0.));+#7285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7286 = ORIENTED_EDGE('',*,*,#7287,.T.);+#7287 = EDGE_CURVE('',#7258,#7288,#7290,.T.);+#7288 = VERTEX_POINT('',#7289);+#7289 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.1500001)+ );+#7290 = SURFACE_CURVE('',#7291,(#7295,#7302),.PCURVE_S1.);+#7291 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7292,#7293,#7294),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7292 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.1500001)+ );+#7293 = CARTESIAN_POINT('',(0.266520559981,-2.171472894284E-02,1.1500001+ ));+#7294 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.1500001)+ );+#7295 = PCURVE('',#6937,#7296);+#7296 = DEFINITIONAL_REPRESENTATION('',(#7297),#7301);+#7297 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7298,#7299,#7300),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7298 = CARTESIAN_POINT('',(6.55800664241E-02,2.242798646286E-02));+#7299 = CARTESIAN_POINT('',(7.108799949537E-02,3.447411346765E-02));+#7300 = CARTESIAN_POINT('',(7.108799949537E-02,5.904187249058E-02));+#7301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7302 = PCURVE('',#7303,#7310);+#7303 = SURFACE_OF_LINEAR_EXTRUSION('',#7304,#7308);+#7304 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7305,#7306,#7307),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7305 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.2500001)+ );+#7306 = CARTESIAN_POINT('',(0.266520559981,-2.171472894284E-02,1.2500001+ ));+#7307 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.2500001)+ );+#7308 = VECTOR('',#7309,1.);+#7309 = DIRECTION('',(0.,0.,1.));+#7310 = DEFINITIONAL_REPRESENTATION('',(#7311),#7315);+#7311 = LINE('',#7312,#7313);+#7312 = CARTESIAN_POINT('',(0.,-0.1));+#7313 = VECTOR('',#7314,1.);+#7314 = DIRECTION('',(1.,0.));+#7315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7316 = ORIENTED_EDGE('',*,*,#7317,.T.);+#7317 = EDGE_CURVE('',#7288,#7318,#7320,.T.);+#7318 = VERTEX_POINT('',#7319);+#7319 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.1500001)+ );+#7320 = SURFACE_CURVE('',#7321,(#7325,#7332),.PCURVE_S1.);+#7321 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7322,#7323,#7324),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7322 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.1500001)+ );+#7323 = CARTESIAN_POINT('',(0.266520559981,2.750003993856E-02,1.1500001)+ );+#7324 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.1500001)+ );+#7325 = PCURVE('',#6937,#7326);+#7326 = DEFINITIONAL_REPRESENTATION('',(#7327),#7331);+#7327 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7328,#7329,#7330),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7328 = CARTESIAN_POINT('',(7.108799949537E-02,5.904187249058E-02));+#7329 = CARTESIAN_POINT('',(7.108799949537E-02,8.368888234906E-02));+#7330 = CARTESIAN_POINT('',(6.55800664241E-02,9.573500935385E-02));+#7331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7332 = PCURVE('',#7333,#7340);+#7333 = SURFACE_OF_LINEAR_EXTRUSION('',#7334,#7338);+#7334 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7335,#7336,#7337),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7335 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.2500001)+ );+#7336 = CARTESIAN_POINT('',(0.266520559981,2.750003993856E-02,1.2500001)+ );+#7337 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.2500001)+ );+#7338 = VECTOR('',#7339,1.);+#7339 = DIRECTION('',(0.,0.,1.));+#7340 = DEFINITIONAL_REPRESENTATION('',(#7341),#7345);+#7341 = LINE('',#7342,#7343);+#7342 = CARTESIAN_POINT('',(0.,-0.1));+#7343 = VECTOR('',#7344,1.);+#7344 = DIRECTION('',(1.,0.));+#7345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7346 = ORIENTED_EDGE('',*,*,#7347,.T.);+#7347 = EDGE_CURVE('',#7318,#7136,#7348,.T.);+#7348 = SURFACE_CURVE('',#7349,(#7353,#7360),.PCURVE_S1.);+#7349 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7350,#7351,#7352),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7350 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.1500001)+ );+#7351 = CARTESIAN_POINT('',(0.255504693838,5.159229394814E-02,1.1500001)+ );+#7352 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.1500001)+ );+#7353 = PCURVE('',#6937,#7354);+#7354 = DEFINITIONAL_REPRESENTATION('',(#7355),#7359);+#7355 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7356,#7357,#7358),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7356 = CARTESIAN_POINT('',(6.55800664241E-02,9.573500935385E-02));+#7357 = CARTESIAN_POINT('',(6.007213335283E-02,0.107781136359));+#7358 = CARTESIAN_POINT('',(4.881851470362E-02,0.107781136359));+#7359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7360 = PCURVE('',#7361,#7368);+#7361 = SURFACE_OF_LINEAR_EXTRUSION('',#7362,#7366);+#7362 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7363,#7364,#7365),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7363 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.2500001)+ );+#7364 = CARTESIAN_POINT('',(0.255504693838,5.159229394814E-02,1.2500001)+ );+#7365 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.2500001)+ );+#7366 = VECTOR('',#7367,1.);+#7367 = DIRECTION('',(0.,0.,1.));+#7368 = DEFINITIONAL_REPRESENTATION('',(#7369),#7373);+#7369 = LINE('',#7370,#7371);+#7370 = CARTESIAN_POINT('',(0.,-0.1));+#7371 = VECTOR('',#7372,1.);+#7372 = DIRECTION('',(1.,0.));+#7373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7374 = ADVANCED_FACE('',(#7375),#7361,.T.);+#7375 = FACE_BOUND('',#7376,.T.);+#7376 = EDGE_LOOP('',(#7377,#7413,#7434,#7435));+#7377 = ORIENTED_EDGE('',*,*,#7378,.T.);+#7378 = EDGE_CURVE('',#7379,#7381,#7383,.T.);+#7379 = VERTEX_POINT('',#7380);+#7380 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.2));+#7381 = VERTEX_POINT('',#7382);+#7382 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.2));+#7383 = SURFACE_CURVE('',#7384,(#7390,#7399),.PCURVE_S1.);+#7384 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7385,#7386,#7387,#7388,#7389),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7385 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.2));+#7386 = CARTESIAN_POINT('',(0.24987782503,5.159229394814E-02,1.2));+#7387 = CARTESIAN_POINT('',(0.254547465819,4.958464848093E-02,1.2));+#7388 = CARTESIAN_POINT('',(0.258258958109,4.556857928336E-02,1.2));+#7389 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.2));+#7390 = PCURVE('',#7361,#7391);+#7391 = DEFINITIONAL_REPRESENTATION('',(#7392),#7398);+#7392 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7393,#7394,#7395,#7396,#7397),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7393 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7394 = CARTESIAN_POINT('',(0.750002642893,-5.00001E-02));+#7395 = CARTESIAN_POINT('',(0.499983736994,-5.00001E-02));+#7396 = CARTESIAN_POINT('',(0.249972972127,-5.00001E-02));+#7397 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7399 = PCURVE('',#7400,#7405);+#7400 = PLANE('',#7401);+#7401 = AXIS2_PLACEMENT_3D('',#7402,#7403,#7404);+#7402 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#7403 = DIRECTION('',(0.,0.,1.));+#7404 = DIRECTION('',(0.43658423493,-0.899663384723,0.));+#7405 = DEFINITIONAL_REPRESENTATION('',(#7406),#7412);+#7406 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7407,#7408,#7409,#7410,#7411),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7407 = CARTESIAN_POINT('',(1.569944137179,0.242268131209));+#7408 = CARTESIAN_POINT('',(1.572400687453,0.247330312015));+#7409 = CARTESIAN_POINT('',(1.576245584121,0.250654910493));+#7410 = CARTESIAN_POINT('',(1.581479073551,0.252240651711));+#7411 = CARTESIAN_POINT('',(1.588099425807,0.252088736421));+#7412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7413 = ORIENTED_EDGE('',*,*,#7414,.T.);+#7414 = EDGE_CURVE('',#7381,#7318,#7415,.T.);+#7415 = SURFACE_CURVE('',#7416,(#7420,#7427),.PCURVE_S1.);+#7416 = LINE('',#7417,#7418);+#7417 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.2500001)+ );+#7418 = VECTOR('',#7419,1.);+#7419 = DIRECTION('',(-0.,-0.,-1.));+#7420 = PCURVE('',#7361,#7421);+#7421 = DEFINITIONAL_REPRESENTATION('',(#7422),#7426);+#7422 = LINE('',#7423,#7424);+#7423 = CARTESIAN_POINT('',(0.,0.));+#7424 = VECTOR('',#7425,1.);+#7425 = DIRECTION('',(0.,-1.));+#7426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7427 = PCURVE('',#7333,#7428);+#7428 = DEFINITIONAL_REPRESENTATION('',(#7429),#7433);+#7429 = LINE('',#7430,#7431);+#7430 = CARTESIAN_POINT('',(1.,0.));+#7431 = VECTOR('',#7432,1.);+#7432 = DIRECTION('',(0.,-1.));+#7433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7434 = ORIENTED_EDGE('',*,*,#7347,.T.);+#7435 = ORIENTED_EDGE('',*,*,#7436,.F.);+#7436 = EDGE_CURVE('',#7379,#7136,#7437,.T.);+#7437 = SURFACE_CURVE('',#7438,(#7442,#7449),.PCURVE_S1.);+#7438 = LINE('',#7439,#7440);+#7439 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.2500001)+ );+#7440 = VECTOR('',#7441,1.);+#7441 = DIRECTION('',(-0.,-0.,-1.));+#7442 = PCURVE('',#7361,#7443);+#7443 = DEFINITIONAL_REPRESENTATION('',(#7444),#7448);+#7444 = LINE('',#7445,#7446);+#7445 = CARTESIAN_POINT('',(1.,0.));+#7446 = VECTOR('',#7447,1.);+#7447 = DIRECTION('',(0.,-1.));+#7448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7449 = PCURVE('',#7153,#7450);+#7450 = DEFINITIONAL_REPRESENTATION('',(#7451),#7455);+#7451 = LINE('',#7452,#7453);+#7452 = CARTESIAN_POINT('',(0.,0.));+#7453 = VECTOR('',#7454,1.);+#7454 = DIRECTION('',(0.,-1.));+#7455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7456 = ADVANCED_FACE('',(#7457,#7679),#7400,.T.);+#7457 = FACE_BOUND('',#7458,.T.);+#7458 = EDGE_LOOP('',(#7459,#7497,#7526,#7555,#7584,#7622,#7651,#7678));+#7459 = ORIENTED_EDGE('',*,*,#7460,.F.);+#7460 = EDGE_CURVE('',#7461,#7379,#7463,.T.);+#7461 = VERTEX_POINT('',#7462);+#7462 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.2));+#7463 = SURFACE_CURVE('',#7464,(#7473,#7485),.PCURVE_S1.);+#7464 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7465,#7466,#7467,#7468,#7469,+ #7470,#7471,#7472),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#7465 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.2));+#7466 = CARTESIAN_POINT('',(0.229344909147,4.34306632901E-02,1.2));+#7467 = CARTESIAN_POINT('',(0.231514037462,4.648045476209E-02,1.2));+#7468 = CARTESIAN_POINT('',(0.234076245183,4.869498279571E-02,1.2));+#7469 = CARTESIAN_POINT('',(0.238657805222,5.083324888627E-02,1.2));+#7470 = CARTESIAN_POINT('',(0.240403246004,5.133929029708E-02,1.2));+#7471 = CARTESIAN_POINT('',(0.242267684511,5.159229394814E-02,1.2));+#7472 = CARTESIAN_POINT('',(0.244251075189,5.159229394814E-02,1.2));+#7473 = PCURVE('',#7400,#7474);+#7474 = DEFINITIONAL_REPRESENTATION('',(#7475),#7484);+#7475 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7476,#7477,#7478,#7479,#7480,+ #7481,#7482,#7483),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#7476 = CARTESIAN_POINT('',(1.573498367004,0.222000526787));+#7477 = CARTESIAN_POINT('',(1.570779060344,0.225294360137));+#7478 = CARTESIAN_POINT('',(1.568982281852,0.228577336336));+#7479 = CARTESIAN_POINT('',(1.568108571563,0.231849288834));+#7480 = CARTESIAN_POINT('',(1.568185088739,0.236904683911));+#7481 = CARTESIAN_POINT('',(1.568491853739,0.238695922775));+#7482 = CARTESIAN_POINT('',(1.569078220077,0.240483747238));+#7483 = CARTESIAN_POINT('',(1.569944137179,0.242268131209));+#7484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7485 = PCURVE('',#7153,#7486);+#7486 = DEFINITIONAL_REPRESENTATION('',(#7487),#7496);+#7487 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7488,#7489,#7490,#7491,#7492,+ #7493,#7494,#7495),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#7488 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7489 = CARTESIAN_POINT('',(0.838765756612,-5.00001E-02));+#7490 = CARTESIAN_POINT('',(0.677515731901,-5.00001E-02));+#7491 = CARTESIAN_POINT('',(0.516257837385,-5.00001E-02));+#7492 = CARTESIAN_POINT('',(0.266248653531,-5.00001E-02));+#7493 = CARTESIAN_POINT('',(0.177497324118,-5.00001E-02));+#7494 = CARTESIAN_POINT('',(8.874733279964E-02,-5.00001E-02));+#7495 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7497 = ORIENTED_EDGE('',*,*,#7498,.F.);+#7498 = EDGE_CURVE('',#7499,#7461,#7501,.T.);+#7499 = VERTEX_POINT('',#7500);+#7500 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.2));+#7501 = SURFACE_CURVE('',#7502,(#7508,#7517),.PCURVE_S1.);+#7502 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7503,#7504,#7505,#7506,#7507),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7503 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.2));+#7504 = CARTESIAN_POINT('',(0.222060841233,1.517044687707E-02,1.2));+#7505 = CARTESIAN_POINT('',(0.222977922901,2.539487807556E-02,1.2));+#7506 = CARTESIAN_POINT('',(0.224813792589,3.352088319257E-02,1.2));+#7507 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.2));+#7508 = PCURVE('',#7400,#7509);+#7509 = DEFINITIONAL_REPRESENTATION('',(#7510),#7516);+#7510 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7511,#7512,#7513,#7514,#7515),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7511 = CARTESIAN_POINT('',(1.604105161965,0.201025595993));+#7512 = CARTESIAN_POINT('',(1.593023633078,0.206403185982));+#7513 = CARTESIAN_POINT('',(1.584225470098,0.211692076252));+#7514 = CARTESIAN_POINT('',(1.577716312593,0.216891426716));+#7515 = CARTESIAN_POINT('',(1.573498367004,0.222000526787));+#7516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7517 = PCURVE('',#7183,#7518);+#7518 = DEFINITIONAL_REPRESENTATION('',(#7519),#7525);+#7519 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7520,#7521,#7522,#7523,#7524),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7520 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7521 = CARTESIAN_POINT('',(0.750123506508,-5.00001E-02));+#7522 = CARTESIAN_POINT('',(0.500143833517,-5.00001E-02));+#7523 = CARTESIAN_POINT('',(0.250092156109,-5.00001E-02));+#7524 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7526 = ORIENTED_EDGE('',*,*,#7527,.F.);+#7527 = EDGE_CURVE('',#7528,#7499,#7530,.T.);+#7528 = VERTEX_POINT('',#7529);+#7529 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.2));+#7530 = SURFACE_CURVE('',#7531,(#7537,#7546),.PCURVE_S1.);+#7531 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7532,#7533,#7534,#7535,#7536),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7532 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.2));+#7533 = CARTESIAN_POINT('',(0.224813801491,-2.773559166542E-02,1.2));+#7534 = CARTESIAN_POINT('',(0.222977931255,-1.962283008184E-02,1.2));+#7535 = CARTESIAN_POINT('',(0.222060841233,-9.424836741295E-03,1.2));+#7536 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.2));+#7537 = PCURVE('',#7400,#7538);+#7538 = DEFINITIONAL_REPRESENTATION('',(#7539),#7545);+#7539 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7540,#7541,#7542,#7543,#7544),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7540 = CARTESIAN_POINT('',(1.639450011342,0.189995836284));+#7541 = CARTESIAN_POINT('',(1.632826523986,0.190147823515));+#7542 = CARTESIAN_POINT('',(1.624726257438,0.192038062093));+#7543 = CARTESIAN_POINT('',(1.615151109186,0.1956652729));+#7544 = CARTESIAN_POINT('',(1.604105161965,0.201025595993));+#7545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7546 = PCURVE('',#7213,#7547);+#7547 = DEFINITIONAL_REPRESENTATION('',(#7548),#7554);+#7548 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7549,#7550,#7551,#7552,#7553),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7549 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7550 = CARTESIAN_POINT('',(0.749908651975,-5.00001E-02));+#7551 = CARTESIAN_POINT('',(0.49985746444,-5.00001E-02));+#7552 = CARTESIAN_POINT('',(0.249877630473,-5.00001E-02));+#7553 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7555 = ORIENTED_EDGE('',*,*,#7556,.F.);+#7556 = EDGE_CURVE('',#7557,#7528,#7559,.T.);+#7557 = VERTEX_POINT('',#7558);+#7558 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.2));+#7559 = SURFACE_CURVE('',#7560,(#7566,#7575),.PCURVE_S1.);+#7560 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7561,#7562,#7563,#7564,#7565),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7561 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.2));+#7562 = CARTESIAN_POINT('',(0.238663938738,-4.580698295242E-02,1.2));+#7563 = CARTESIAN_POINT('',(0.234020720467,-4.379932913926E-02,1.2));+#7564 = CARTESIAN_POINT('',(0.230322439042,-3.978325940325E-02,1.2));+#7565 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.2));+#7566 = PCURVE('',#7400,#7567);+#7567 = DEFINITIONAL_REPRESENTATION('',(#7568),#7574);+#7568 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7569,#7570,#7571,#7572,#7573),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7569 = CARTESIAN_POINT('',(1.657570700305,0.19974514242));+#7570 = CARTESIAN_POINT('',(1.655131444612,0.19471860033));+#7571 = CARTESIAN_POINT('',(1.65129807609,0.191417776868));+#7572 = CARTESIAN_POINT('',(1.646070353832,0.189843921217));+#7573 = CARTESIAN_POINT('',(1.639450011342,0.189995836284));+#7574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7575 = PCURVE('',#7243,#7576);+#7576 = DEFINITIONAL_REPRESENTATION('',(#7577),#7583);+#7577 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7578,#7579,#7580,#7581,#7582),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7578 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7579 = CARTESIAN_POINT('',(0.750002123433,-5.00001E-02));+#7580 = CARTESIAN_POINT('',(0.499983144654,-5.00001E-02));+#7581 = CARTESIAN_POINT('',(0.249972603361,-5.00001E-02));+#7582 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7584 = ORIENTED_EDGE('',*,*,#7585,.F.);+#7585 = EDGE_CURVE('',#7586,#7557,#7588,.T.);+#7586 = VERTEX_POINT('',#7587);+#7587 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.2));+#7588 = SURFACE_CURVE('',#7589,(#7598,#7610),.PCURVE_S1.);+#7589 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7590,#7591,#7592,#7593,#7594,+ #7595,#7596,#7597),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#7590 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.2));+#7591 = CARTESIAN_POINT('',(0.259264026309,-3.758513352021E-02,1.2));+#7592 = CARTESIAN_POINT('',(0.25712919811,-4.060038395938E-02,1.2));+#7593 = CARTESIAN_POINT('',(0.254608059071,-4.280607469858E-02,1.2));+#7594 = CARTESIAN_POINT('',(0.250029670927,-4.500457279865E-02,1.2));+#7595 = CARTESIAN_POINT('',(0.248231011593,-4.553952552051E-02,1.2));+#7596 = CARTESIAN_POINT('',(0.246304796173,-4.580698295242E-02,1.2));+#7597 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.2));+#7598 = PCURVE('',#7400,#7599);+#7599 = DEFINITIONAL_REPRESENTATION('',(#7600),#7609);+#7600 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7601,#7602,#7603,#7604,#7605,+ #7606,#7607,#7608),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#7601 = CARTESIAN_POINT('',(1.654051070145,0.220084045917));+#7602 = CARTESIAN_POINT('',(1.656728221195,0.216841274684));+#7603 = CARTESIAN_POINT('',(1.658508899274,0.213604237114));+#7604 = CARTESIAN_POINT('',(1.659392588912,0.210373090829));+#7605 = CARTESIAN_POINT('',(1.659371645069,0.205294253044));+#7606 = CARTESIAN_POINT('',(1.659067656136,0.203442513175));+#7607 = CARTESIAN_POINT('',(1.658467322509,0.201592799992));+#7608 = CARTESIAN_POINT('',(1.657570700305,0.19974514242));+#7609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7610 = PCURVE('',#7273,#7611);+#7611 = DEFINITIONAL_REPRESENTATION('',(#7612),#7621);+#7612 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7613,#7614,#7615,#7616,#7617,+ #7618,#7619,#7620),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#7613 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7614 = CARTESIAN_POINT('',(0.841265264302,-5.00001E-02));+#7615 = CARTESIAN_POINT('',(0.682515291442,-5.00001E-02));+#7616 = CARTESIAN_POINT('',(0.523757669192,-5.00001E-02));+#7617 = CARTESIAN_POINT('',(0.273748580646,-5.00001E-02));+#7618 = CARTESIAN_POINT('',(0.182497145522,-5.00001E-02));+#7619 = CARTESIAN_POINT('',(9.124713781295E-02,-5.00001E-02));+#7620 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7622 = ORIENTED_EDGE('',*,*,#7623,.F.);+#7623 = EDGE_CURVE('',#7624,#7586,#7626,.T.);+#7624 = VERTEX_POINT('',#7625);+#7625 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.2));+#7626 = SURFACE_CURVE('',#7627,(#7633,#7642),.PCURVE_S1.);+#7627 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7628,#7629,#7630,#7631,#7632),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7628 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.2));+#7629 = CARTESIAN_POINT('',(0.266520559981,-9.424836744601E-03,1.2));+#7630 = CARTESIAN_POINT('',(0.265603469959,-1.96228300803E-02,1.2));+#7631 = CARTESIAN_POINT('',(0.263767599722,-2.773559166649E-02,1.2));+#7632 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.2));+#7633 = PCURVE('',#7400,#7634);+#7634 = DEFINITIONAL_REPRESENTATION('',(#7635),#7641);+#7635 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7636,#7637,#7638,#7639,#7640),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7636 = CARTESIAN_POINT('',(1.623515574259,0.241024377046));+#7637 = CARTESIAN_POINT('',(1.634561521484,0.235664053951));+#7638 = CARTESIAN_POINT('',(1.64333589564,0.23038669852));+#7639 = CARTESIAN_POINT('',(1.649833138186,0.225193129479));+#7640 = CARTESIAN_POINT('',(1.654051070145,0.220084045917));+#7641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7642 = PCURVE('',#7303,#7643);+#7643 = DEFINITIONAL_REPRESENTATION('',(#7644),#7650);+#7644 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7645,#7646,#7647,#7648,#7649),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7645 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7646 = CARTESIAN_POINT('',(0.750122369459,-5.00001E-02));+#7647 = CARTESIAN_POINT('',(0.500142535597,-5.00001E-02));+#7648 = CARTESIAN_POINT('',(0.25009134798,-5.00001E-02));+#7649 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7651 = ORIENTED_EDGE('',*,*,#7652,.F.);+#7652 = EDGE_CURVE('',#7381,#7624,#7653,.T.);+#7653 = SURFACE_CURVE('',#7654,(#7660,#7669),.PCURVE_S1.);+#7654 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7655,#7656,#7657,#7658,#7659),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7655 = CARTESIAN_POINT('',(0.26101262691,3.954616694335E-02,1.2));+#7656 = CARTESIAN_POINT('',(0.263767608625,3.352088319143E-02,1.2));+#7657 = CARTESIAN_POINT('',(0.265603478312,2.539487807703E-02,1.2));+#7658 = CARTESIAN_POINT('',(0.266520559981,1.517044687406E-02,1.2));+#7659 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.2));+#7660 = PCURVE('',#7400,#7661);+#7661 = DEFINITIONAL_REPRESENTATION('',(#7662),#7668);+#7662 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7663,#7664,#7665,#7666,#7667),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7663 = CARTESIAN_POINT('',(1.588099425807,0.252088736421));+#7664 = CARTESIAN_POINT('',(1.594722934566,0.251936748699));+#7665 = CARTESIAN_POINT('',(1.602835115594,0.250040727709));+#7666 = CARTESIAN_POINT('',(1.612434045376,0.246401967033));+#7667 = CARTESIAN_POINT('',(1.623515574259,0.241024377046));+#7668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7669 = PCURVE('',#7333,#7670);+#7670 = DEFINITIONAL_REPRESENTATION('',(#7671),#7677);+#7671 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7672,#7673,#7674,#7675,#7676),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7672 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7673 = CARTESIAN_POINT('',(0.749907843844,-5.00001E-02));+#7674 = CARTESIAN_POINT('',(0.499856166519,-5.00001E-02));+#7675 = CARTESIAN_POINT('',(0.249876493431,-5.00001E-02));+#7676 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7678 = ORIENTED_EDGE('',*,*,#7378,.F.);+#7679 = FACE_BOUND('',#7680,.T.);+#7680 = EDGE_LOOP('',(#7681,#7719,#7755,#7791,#7827,#7863,#7899,#7935));+#7681 = ORIENTED_EDGE('',*,*,#7682,.F.);+#7682 = EDGE_CURVE('',#7683,#7685,#7687,.T.);+#7683 = VERTEX_POINT('',#7684);+#7684 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.2));+#7685 = VERTEX_POINT('',#7686);+#7686 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.2));+#7687 = SURFACE_CURVE('',#7688,(#7694,#7703),.PCURVE_S1.);+#7688 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7689,#7690,#7691,#7692,#7693),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7689 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.2));+#7690 = CARTESIAN_POINT('',(0.235236298645,9.193103159402E-03,1.2));+#7691 = CARTESIAN_POINT('',(0.234219236986,7.409955443002E-03,1.2));+#7692 = CARTESIAN_POINT('',(0.23371071406,5.428675230102E-03,1.2));+#7693 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.2));+#7694 = PCURVE('',#7400,#7695);+#7695 = DEFINITIONAL_REPRESENTATION('',(#7696),#7702);+#7696 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7697,#7698,#7699,#7700,#7701),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7697 = CARTESIAN_POINT('',(1.603393492402,0.217711540939));+#7698 = CARTESIAN_POINT('',(1.604153427353,0.215647048559));+#7699 = CARTESIAN_POINT('',(1.605313626976,0.213953541242));+#7700 = CARTESIAN_POINT('',(1.606874099146,0.21263104608));+#7701 = CARTESIAN_POINT('',(1.608834817405,0.211679558339));+#7702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7703 = PCURVE('',#7704,#7711);+#7704 = SURFACE_OF_LINEAR_EXTRUSION('',#7705,#7709);+#7705 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7706,#7707,#7708),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7706 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.2500001)+ );+#7707 = CARTESIAN_POINT('',(0.23371071406,7.608080213551E-03,1.2500001)+ );+#7708 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.2500001)+ );+#7709 = VECTOR('',#7710,1.);+#7710 = DIRECTION('',(0.,0.,1.));+#7711 = DEFINITIONAL_REPRESENTATION('',(#7712),#7718);+#7712 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7713,#7714,#7715,#7716,#7717),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7713 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7714 = CARTESIAN_POINT('',(0.75000098338,-5.00001E-02));+#7715 = CARTESIAN_POINT('',(0.500000119824,-5.00001E-02));+#7716 = CARTESIAN_POINT('',(0.249999196383,-5.00001E-02));+#7717 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7719 = ORIENTED_EDGE('',*,*,#7720,.F.);+#7720 = EDGE_CURVE('',#7721,#7683,#7723,.T.);+#7721 = VERTEX_POINT('',#7722);+#7722 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.2));+#7723 = SURFACE_CURVE('',#7724,(#7730,#7739),.PCURVE_S1.);+#7724 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7725,#7726,#7727,#7728,#7729),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7725 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.2));+#7726 = CARTESIAN_POINT('',(0.241952806967,1.394814705818E-02,1.2));+#7727 = CARTESIAN_POINT('',(0.240017755594,1.341981112185E-02,1.2));+#7728 = CARTESIAN_POINT('',(0.238287442343,1.236312258595E-02,1.2));+#7729 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.2));+#7730 = PCURVE('',#7400,#7731);+#7731 = DEFINITIONAL_REPRESENTATION('',(#7732),#7738);+#7732 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7733,#7734,#7735,#7736,#7737),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7733 = CARTESIAN_POINT('',(1.603741998454,0.225690691989));+#7734 = CARTESIAN_POINT('',(1.602807810112,0.223765622372));+#7735 = CARTESIAN_POINT('',(1.602438321685,0.221794064363));+#7736 = CARTESIAN_POINT('',(1.602633558183,0.219776031331));+#7737 = CARTESIAN_POINT('',(1.603393492402,0.217711540939));+#7738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7739 = PCURVE('',#7740,#7747);+#7740 = SURFACE_OF_LINEAR_EXTRUSION('',#7741,#7745);+#7741 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7742,#7743,#7744),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7742 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.2500001)+ );+#7743 = CARTESIAN_POINT('',(0.239813028398,1.394814705818E-02,1.2500001)+ );+#7744 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.2500001)+ );+#7745 = VECTOR('',#7746,1.);+#7746 = DIRECTION('',(0.,0.,1.));+#7747 = DEFINITIONAL_REPRESENTATION('',(#7748),#7754);+#7748 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7749,#7750,#7751,#7752,#7753),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7749 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7750 = CARTESIAN_POINT('',(0.750000702078,-5.00001E-02));+#7751 = CARTESIAN_POINT('',(0.499999651937,-5.00001E-02));+#7752 = CARTESIAN_POINT('',(0.24999877587,-5.00001E-02));+#7753 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7755 = ORIENTED_EDGE('',*,*,#7756,.F.);+#7756 = EDGE_CURVE('',#7757,#7721,#7759,.T.);+#7757 = VERTEX_POINT('',#7758);+#7758 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.2));+#7759 = SURFACE_CURVE('',#7760,(#7766,#7775),.PCURVE_S1.);+#7760 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7761,#7762,#7763,#7764,#7765),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7761 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.2));+#7762 = CARTESIAN_POINT('',(0.250115643816,1.236312355158E-02,1.2));+#7763 = CARTESIAN_POINT('',(0.248319287409,1.341981183542E-02,1.2));+#7764 = CARTESIAN_POINT('',(0.246311589184,1.394814705818E-02,1.2));+#7765 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.2));+#7766 = PCURVE('',#7400,#7767);+#7767 = DEFINITIONAL_REPRESENTATION('',(#7768),#7774);+#7768 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7769,#7770,#7771,#7772,#7773),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7769 = CARTESIAN_POINT('',(1.609915529332,0.231151416569));+#7770 = CARTESIAN_POINT('',(1.607797563605,0.230417431525));+#7771 = CARTESIAN_POINT('',(1.606062638959,0.229262648886));+#7772 = CARTESIAN_POINT('',(1.604710785711,0.227687059134));+#7773 = CARTESIAN_POINT('',(1.603741998454,0.225690691989));+#7774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7775 = PCURVE('',#7776,#7783);+#7776 = SURFACE_OF_LINEAR_EXTRUSION('',#7777,#7781);+#7777 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7778,#7779,#7780),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7778 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.2500001)+ );+#7779 = CARTESIAN_POINT('',(0.248530620309,1.394814705818E-02,1.2500001)+ );+#7780 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.2500001)+ );+#7781 = VECTOR('',#7782,1.);+#7782 = DIRECTION('',(0.,0.,1.));+#7783 = DEFINITIONAL_REPRESENTATION('',(#7784),#7790);+#7784 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7785,#7786,#7787,#7788,#7789),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7785 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7786 = CARTESIAN_POINT('',(0.750001071824,-5.00001E-02));+#7787 = CARTESIAN_POINT('',(0.500000133953,-5.00001E-02));+#7788 = CARTESIAN_POINT('',(0.249999129133,-5.00001E-02));+#7789 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7791 = ORIENTED_EDGE('',*,*,#7792,.F.);+#7792 = EDGE_CURVE('',#7793,#7757,#7795,.T.);+#7793 = VERTEX_POINT('',#7794);+#7794 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.2));+#7795 = SURFACE_CURVE('',#7796,(#7802,#7811),.PCURVE_S1.);+#7796 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7797,#7798,#7799,#7800,#7801),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7797 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.2));+#7798 = CARTESIAN_POINT('',(0.254870687154,5.428676304643E-03,1.2));+#7799 = CARTESIAN_POINT('',(0.254342351126,7.409957396937E-03,1.2));+#7800 = CARTESIAN_POINT('',(0.253285662645,9.193104722252E-03,1.2));+#7801 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.2));+#7802 = PCURVE('',#7400,#7803);+#7803 = DEFINITIONAL_REPRESENTATION('',(#7804),#7810);+#7804 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7805,#7806,#7807,#7808,#7809),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7805 = CARTESIAN_POINT('',(1.618072928069,0.230716411354));+#7806 = CARTESIAN_POINT('',(1.616112208844,0.231667899563));+#7807 = CARTESIAN_POINT('',(1.61409905961,0.232057571073));+#7808 = CARTESIAN_POINT('',(1.61203349372,0.231885401149));+#7809 = CARTESIAN_POINT('',(1.609915529332,0.231151416569));+#7810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7811 = PCURVE('',#7812,#7819);+#7812 = SURFACE_OF_LINEAR_EXTRUSION('',#7813,#7817);+#7813 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7814,#7815,#7816),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7814 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.2500001)+ );+#7815 = CARTESIAN_POINT('',(0.254870687154,7.608080213551E-03,1.2500001)+ );+#7816 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.2500001)+ );+#7817 = VECTOR('',#7818,1.);+#7818 = DIRECTION('',(0.,0.,1.));+#7819 = DEFINITIONAL_REPRESENTATION('',(#7820),#7826);+#7820 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7821,#7822,#7823,#7824,#7825),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7821 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7822 = CARTESIAN_POINT('',(0.750000680356,-5.00001E-02));+#7823 = CARTESIAN_POINT('',(0.499999633622,-5.00001E-02));+#7824 = CARTESIAN_POINT('',(0.249998770116,-5.00001E-02));+#7825 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7827 = ORIENTED_EDGE('',*,*,#7828,.F.);+#7828 = EDGE_CURVE('',#7829,#7793,#7831,.T.);+#7829 = VERTEX_POINT('',#7830);+#7830 = CARTESIAN_POINT('',(0.251740279149,-4.279545120122E-03,1.2));+#7831 = SURFACE_CURVE('',#7832,(#7838,#7847),.PCURVE_S1.);+#7832 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7833,#7834,#7835,#7836,#7837),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7833 = CARTESIAN_POINT('',(0.251740279149,-4.279545120123E-03,1.2));+#7834 = CARTESIAN_POINT('',(0.253305477631,-2.734159277953E-03,1.2));+#7835 = CARTESIAN_POINT('',(0.254348956885,-9.642193746797E-04,1.2));+#7836 = CARTESIAN_POINT('',(0.254870687154,1.030270215671E-03,1.2));+#7837 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.2));+#7838 = PCURVE('',#7400,#7839);+#7839 = DEFINITIONAL_REPRESENTATION('',(#7840),#7846);+#7840 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7841,#7842,#7843,#7844,#7845),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7841 = CARTESIAN_POINT('',(1.623479653407,0.224613129679));+#7842 = CARTESIAN_POINT('',(1.622772667331,0.226695972538));+#7843 = CARTESIAN_POINT('',(1.621635883799,0.228407480474));+#7844 = CARTESIAN_POINT('',(1.620069293753,0.229747624806));+#7845 = CARTESIAN_POINT('',(1.618072928069,0.230716411354));+#7846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7847 = PCURVE('',#7848,#7855);+#7848 = SURFACE_OF_LINEAR_EXTRUSION('',#7849,#7853);+#7849 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7850,#7851,#7852),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7850 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.2500001)+ );+#7851 = CARTESIAN_POINT('',(0.254870687154,-1.188762533367E-03,1.2500001+ ));+#7852 = CARTESIAN_POINT('',(0.251740279149,-4.279545120122E-03,1.2500001+ ));+#7853 = VECTOR('',#7854,1.);+#7854 = DIRECTION('',(0.,0.,1.));+#7855 = DEFINITIONAL_REPRESENTATION('',(#7856),#7862);+#7856 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7857,#7858,#7859,#7860,#7861),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7857 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7858 = CARTESIAN_POINT('',(0.750000881849,-5.00001E-02));+#7859 = CARTESIAN_POINT('',(0.499999885355,-5.00001E-02));+#7860 = CARTESIAN_POINT('',(0.249998946223,-5.00001E-02));+#7861 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7863 = ORIENTED_EDGE('',*,*,#7864,.F.);+#7864 = EDGE_CURVE('',#7865,#7829,#7867,.T.);+#7865 = VERTEX_POINT('',#7866);+#7866 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.2));+#7867 = SURFACE_CURVE('',#7868,(#7874,#7883),.PCURVE_S1.);+#7868 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7869,#7870,#7871,#7872,#7873),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7869 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.2));+#7870 = CARTESIAN_POINT('',(0.246351211312,-7.370327706877E-03,1.2));+#7871 = CARTESIAN_POINT('',(0.248378721957,-6.855202302035E-03,1.2));+#7872 = CARTESIAN_POINT('',(0.250175079485,-5.824932130093E-03,1.2));+#7873 = CARTESIAN_POINT('',(0.251740279149,-4.279545120123E-03,1.2));+#7874 = PCURVE('',#7400,#7875);+#7875 = DEFINITIONAL_REPRESENTATION('',(#7876),#7882);+#7876 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7877,#7878,#7879,#7880,#7881),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7877 = CARTESIAN_POINT('',(1.622921449618,0.216383381994));+#7878 = CARTESIAN_POINT('',(1.623907535272,0.218415395717));+#7879 = CARTESIAN_POINT('',(1.62432927499,0.220464368437));+#7880 = CARTESIAN_POINT('',(1.624186640017,0.222530285246));+#7881 = CARTESIAN_POINT('',(1.623479653407,0.224613129679));+#7882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7883 = PCURVE('',#7884,#7891);+#7884 = SURFACE_OF_LINEAR_EXTRUSION('',#7885,#7889);+#7885 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7886,#7887,#7888),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7886 = CARTESIAN_POINT('',(0.251740279149,-4.279545120122E-03,1.2500001+ ));+#7887 = CARTESIAN_POINT('',(0.248609871145,-7.370327706877E-03,1.2500001+ ));+#7888 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.2500001+ ));+#7889 = VECTOR('',#7890,1.);+#7890 = DIRECTION('',(0.,0.,1.));+#7891 = DEFINITIONAL_REPRESENTATION('',(#7892),#7898);+#7892 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7893,#7894,#7895,#7896,#7897),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7893 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7894 = CARTESIAN_POINT('',(0.750001219669,-5.00001E-02));+#7895 = CARTESIAN_POINT('',(0.50000035115,-5.00001E-02));+#7896 = CARTESIAN_POINT('',(0.249999307068,-5.00001E-02));+#7897 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7899 = ORIENTED_EDGE('',*,*,#7900,.F.);+#7900 = EDGE_CURVE('',#7901,#7865,#7903,.T.);+#7901 = VERTEX_POINT('',#7902);+#7902 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.2));+#7903 = SURFACE_CURVE('',#7904,(#7910,#7919),.PCURVE_S1.);+#7904 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7905,#7906,#7907,#7908,#7909),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7905 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.2));+#7906 = CARTESIAN_POINT('',(0.23816857067,-5.864558902912E-03,1.2));+#7907 = CARTESIAN_POINT('',(0.239898886075,-6.868411303657E-03,1.2));+#7908 = CARTESIAN_POINT('',(0.241873562402,-7.370327706878E-03,1.2));+#7909 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.2));+#7910 = PCURVE('',#7400,#7911);+#7911 = DEFINITIONAL_REPRESENTATION('',(#7912),#7918);+#7912 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7913,#7914,#7915,#7916,#7917),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7913 = CARTESIAN_POINT('',(1.616977016054,0.211031705771));+#7914 = CARTESIAN_POINT('',(1.618980438309,0.211711168462));+#7915 = CARTESIAN_POINT('',(1.620638995984,0.212829603744));+#7916 = CARTESIAN_POINT('',(1.621952664348,0.214387018943));+#7917 = CARTESIAN_POINT('',(1.622921449618,0.216383381994));+#7918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7919 = PCURVE('',#7920,#7927);+#7920 = SURFACE_OF_LINEAR_EXTRUSION('',#7921,#7925);+#7921 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7922,#7923,#7924),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7922 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.2500001+ ));+#7923 = CARTESIAN_POINT('',(0.239654526727,-7.370327706877E-03,1.2500001+ ));+#7924 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.2500001)+ );+#7925 = VECTOR('',#7926,1.);+#7926 = DIRECTION('',(0.,0.,1.));+#7927 = DEFINITIONAL_REPRESENTATION('',(#7928),#7934);+#7928 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7929,#7930,#7931,#7932,#7933),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7929 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7930 = CARTESIAN_POINT('',(0.750000486192,-5.00001E-02));+#7931 = CARTESIAN_POINT('',(0.499999401774,-5.00001E-02));+#7932 = CARTESIAN_POINT('',(0.24999861651,-5.00001E-02));+#7933 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7935 = ORIENTED_EDGE('',*,*,#7936,.F.);+#7936 = EDGE_CURVE('',#7685,#7901,#7937,.T.);+#7937 = SURFACE_CURVE('',#7938,(#7944,#7953),.PCURVE_S1.);+#7938 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7939,#7940,#7941,#7942,#7943),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7939 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.2));+#7940 = CARTESIAN_POINT('',(0.23371071406,9.510261322045E-04,1.2));+#7941 = CARTESIAN_POINT('',(0.23420602484,-1.083088567984E-03,1.2));+#7942 = CARTESIAN_POINT('',(0.235196668051,-2.85303091554E-03,1.2));+#7943 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.2));+#7944 = PCURVE('',#7400,#7945);+#7945 = DEFINITIONAL_REPRESENTATION('',(#7946),#7952);+#7946 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7947,#7948,#7949,#7950,#7951),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7947 = CARTESIAN_POINT('',(1.608834817405,0.211679558339));+#7948 = CARTESIAN_POINT('',(1.610902476089,0.210676175074));+#7949 = CARTESIAN_POINT('',(1.612948739483,0.210233725637));+#7950 = CARTESIAN_POINT('',(1.614973591015,0.210352242135));+#7951 = CARTESIAN_POINT('',(1.616977016054,0.211031705771));+#7952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7953 = PCURVE('',#7954,#7961);+#7954 = SURFACE_OF_LINEAR_EXTRUSION('',#7955,#7959);+#7955 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7956,#7957,#7958),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7956 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.2500001)+ );+#7957 = CARTESIAN_POINT('',(0.23371071406,-1.347264204483E-03,1.2500001)+ );+#7958 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.2500001)+ );+#7959 = VECTOR('',#7960,1.);+#7960 = DIRECTION('',(0.,0.,1.));+#7961 = DEFINITIONAL_REPRESENTATION('',(#7962),#7968);+#7962 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7963,#7964,#7965,#7966,#7967),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7963 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7964 = CARTESIAN_POINT('',(0.750001751914,-5.00001E-02));+#7965 = CARTESIAN_POINT('',(0.50000107549,-5.00001E-02));+#7966 = CARTESIAN_POINT('',(0.24999986129,-5.00001E-02));+#7967 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7969 = ADVANCED_FACE('',(#7970),#7740,.T.);+#7970 = FACE_BOUND('',#7971,.T.);+#7971 = EDGE_LOOP('',(#7972,#7973,#7996,#8024));+#7972 = ORIENTED_EDGE('',*,*,#7720,.T.);+#7973 = ORIENTED_EDGE('',*,*,#7974,.T.);+#7974 = EDGE_CURVE('',#7683,#7975,#7977,.T.);+#7975 = VERTEX_POINT('',#7976);+#7976 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.1500001)+ );+#7977 = SURFACE_CURVE('',#7978,(#7982,#7989),.PCURVE_S1.);+#7978 = LINE('',#7979,#7980);+#7979 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.2500001)+ );+#7980 = VECTOR('',#7981,1.);+#7981 = DIRECTION('',(-0.,-0.,-1.));+#7982 = PCURVE('',#7740,#7983);+#7983 = DEFINITIONAL_REPRESENTATION('',(#7984),#7988);+#7984 = LINE('',#7985,#7986);+#7985 = CARTESIAN_POINT('',(0.,0.));+#7986 = VECTOR('',#7987,1.);+#7987 = DIRECTION('',(0.,-1.));+#7988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7989 = PCURVE('',#7704,#7990);+#7990 = DEFINITIONAL_REPRESENTATION('',(#7991),#7995);+#7991 = LINE('',#7992,#7993);+#7992 = CARTESIAN_POINT('',(1.,0.));+#7993 = VECTOR('',#7994,1.);+#7994 = DIRECTION('',(0.,-1.));+#7995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7996 = ORIENTED_EDGE('',*,*,#7997,.T.);+#7997 = EDGE_CURVE('',#7975,#7998,#8000,.T.);+#7998 = VERTEX_POINT('',#7999);+#7999 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.1500001)+ );+#8000 = SURFACE_CURVE('',#8001,(#8005,#8012),.PCURVE_S1.);+#8001 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8002,#8003,#8004),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8002 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.1500001)+ );+#8003 = CARTESIAN_POINT('',(0.239813028398,1.394814705818E-02,1.1500001)+ );+#8004 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.1500001)+ );+#8005 = PCURVE('',#7740,#8006);+#8006 = DEFINITIONAL_REPRESENTATION('',(#8007),#8011);+#8007 = LINE('',#8008,#8009);+#8008 = CARTESIAN_POINT('',(0.,-0.1));+#8009 = VECTOR('',#8010,1.);+#8010 = DIRECTION('',(1.,0.));+#8011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8012 = PCURVE('',#8013,#8018);+#8013 = PLANE('',#8014);+#8014 = AXIS2_PLACEMENT_3D('',#8015,#8016,#8017);+#8015 = CARTESIAN_POINT('',(0.195432560486,-5.618884241049E-02,1.1500001+ ));+#8016 = DIRECTION('',(0.,0.,1.));+#8017 = DIRECTION('',(1.,0.,0.));+#8018 = DEFINITIONAL_REPRESENTATION('',(#8019),#8023);+#8019 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8020,#8021,#8022),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8020 = CARTESIAN_POINT('',(4.13293107434E-02,6.696695604636E-02));+#8021 = CARTESIAN_POINT('',(4.438046791238E-02,7.013698946867E-02));+#8022 = CARTESIAN_POINT('',(4.86600130325E-02,7.013698946867E-02));+#8023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8024 = ORIENTED_EDGE('',*,*,#8025,.F.);+#8025 = EDGE_CURVE('',#7721,#7998,#8026,.T.);+#8026 = SURFACE_CURVE('',#8027,(#8031,#8038),.PCURVE_S1.);+#8027 = LINE('',#8028,#8029);+#8028 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.2500001)+ );+#8029 = VECTOR('',#8030,1.);+#8030 = DIRECTION('',(-0.,-0.,-1.));+#8031 = PCURVE('',#7740,#8032);+#8032 = DEFINITIONAL_REPRESENTATION('',(#8033),#8037);+#8033 = LINE('',#8034,#8035);+#8034 = CARTESIAN_POINT('',(1.,0.));+#8035 = VECTOR('',#8036,1.);+#8036 = DIRECTION('',(0.,-1.));+#8037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8038 = PCURVE('',#7776,#8039);+#8039 = DEFINITIONAL_REPRESENTATION('',(#8040),#8044);+#8040 = LINE('',#8041,#8042);+#8041 = CARTESIAN_POINT('',(0.,0.));+#8042 = VECTOR('',#8043,1.);+#8043 = DIRECTION('',(0.,-1.));+#8044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8045 = ADVANCED_FACE('',(#8046),#8013,.T.);+#8046 = FACE_BOUND('',#8047,.F.);+#8047 = EDGE_LOOP('',(#8048,#8071,#8072,#8095,#8118,#8141,#8164,#8187));+#8048 = ORIENTED_EDGE('',*,*,#8049,.T.);+#8049 = EDGE_CURVE('',#8050,#7975,#8052,.T.);+#8050 = VERTEX_POINT('',#8051);+#8051 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.1500001)+ );+#8052 = SURFACE_CURVE('',#8053,(#8057,#8064),.PCURVE_S1.);+#8053 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8054,#8055,#8056),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8054 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.1500001)+ );+#8055 = CARTESIAN_POINT('',(0.23371071406,7.608080213551E-03,1.1500001)+ );+#8056 = CARTESIAN_POINT('',(0.236761871229,1.077811363586E-02,1.1500001)+ );+#8057 = PCURVE('',#8013,#8058);+#8058 = DEFINITIONAL_REPRESENTATION('',(#8059),#8063);+#8059 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8060,#8061,#8062),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8060 = CARTESIAN_POINT('',(3.827815357443E-02,5.943812666837E-02));+#8061 = CARTESIAN_POINT('',(3.827815357443E-02,6.379692262405E-02));+#8062 = CARTESIAN_POINT('',(4.13293107434E-02,6.696695604636E-02));+#8063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8064 = PCURVE('',#7704,#8065);+#8065 = DEFINITIONAL_REPRESENTATION('',(#8066),#8070);+#8066 = LINE('',#8067,#8068);+#8067 = CARTESIAN_POINT('',(0.,-0.1));+#8068 = VECTOR('',#8069,1.);+#8069 = DIRECTION('',(1.,0.));+#8070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8071 = ORIENTED_EDGE('',*,*,#7997,.T.);+#8072 = ORIENTED_EDGE('',*,*,#8073,.T.);+#8073 = EDGE_CURVE('',#7998,#8074,#8076,.T.);+#8074 = VERTEX_POINT('',#8075);+#8075 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.1500001)+ );+#8076 = SURFACE_CURVE('',#8077,(#8081,#8088),.PCURVE_S1.);+#8077 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8078,#8079,#8080),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8078 = CARTESIAN_POINT('',(0.244092573518,1.394814705818E-02,1.1500001)+ );+#8079 = CARTESIAN_POINT('',(0.248530620309,1.394814705818E-02,1.1500001)+ );+#8080 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.1500001)+ );+#8081 = PCURVE('',#8013,#8082);+#8082 = DEFINITIONAL_REPRESENTATION('',(#8083),#8087);+#8083 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8084,#8085,#8086),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8084 = CARTESIAN_POINT('',(4.86600130325E-02,7.013698946867E-02));+#8085 = CARTESIAN_POINT('',(5.309805982374E-02,7.013698946867E-02));+#8086 = CARTESIAN_POINT('',(5.626809324605E-02,6.696695604636E-02));+#8087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8088 = PCURVE('',#7776,#8089);+#8089 = DEFINITIONAL_REPRESENTATION('',(#8090),#8094);+#8090 = LINE('',#8091,#8092);+#8091 = CARTESIAN_POINT('',(0.,-0.1));+#8092 = VECTOR('',#8093,1.);+#8093 = DIRECTION('',(1.,0.));+#8094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8095 = ORIENTED_EDGE('',*,*,#8096,.T.);+#8096 = EDGE_CURVE('',#8074,#8097,#8099,.T.);+#8097 = VERTEX_POINT('',#8098);+#8098 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.1500001)+ );+#8099 = SURFACE_CURVE('',#8100,(#8104,#8111),.PCURVE_S1.);+#8100 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8101,#8102,#8103),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8101 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.1500001)+ );+#8102 = CARTESIAN_POINT('',(0.254870687154,7.608080213551E-03,1.1500001)+ );+#8103 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.1500001)+ );+#8104 = PCURVE('',#8013,#8105);+#8105 = DEFINITIONAL_REPRESENTATION('',(#8106),#8110);+#8106 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8107,#8108,#8109),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8107 = CARTESIAN_POINT('',(5.626809324605E-02,6.696695604636E-02));+#8108 = CARTESIAN_POINT('',(5.943812666837E-02,6.379692262405E-02));+#8109 = CARTESIAN_POINT('',(5.943812666837E-02,5.943812666837E-02));+#8110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8111 = PCURVE('',#7812,#8112);+#8112 = DEFINITIONAL_REPRESENTATION('',(#8113),#8117);+#8113 = LINE('',#8114,#8115);+#8114 = CARTESIAN_POINT('',(0.,-0.1));+#8115 = VECTOR('',#8116,1.);+#8116 = DIRECTION('',(1.,0.));+#8117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8118 = ORIENTED_EDGE('',*,*,#8119,.T.);+#8119 = EDGE_CURVE('',#8097,#8120,#8122,.T.);+#8120 = VERTEX_POINT('',#8121);+#8121 = CARTESIAN_POINT('',(0.251740279149,-4.279545120122E-03,1.1500001+ ));+#8122 = SURFACE_CURVE('',#8123,(#8127,#8134),.PCURVE_S1.);+#8123 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8124,#8125,#8126),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8124 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.1500001)+ );+#8125 = CARTESIAN_POINT('',(0.254870687154,-1.188762533367E-03,1.1500001+ ));+#8126 = CARTESIAN_POINT('',(0.251740279149,-4.279545120122E-03,1.1500001+ ));+#8127 = PCURVE('',#8013,#8128);+#8128 = DEFINITIONAL_REPRESENTATION('',(#8129),#8133);+#8129 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8130,#8131,#8132),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8130 = CARTESIAN_POINT('',(5.943812666837E-02,5.943812666837E-02));+#8131 = CARTESIAN_POINT('',(5.943812666837E-02,5.500007987713E-02));+#8132 = CARTESIAN_POINT('',(5.630771866383E-02,5.190929729037E-02));+#8133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8134 = PCURVE('',#7848,#8135);+#8135 = DEFINITIONAL_REPRESENTATION('',(#8136),#8140);+#8136 = LINE('',#8137,#8138);+#8137 = CARTESIAN_POINT('',(0.,-0.1));+#8138 = VECTOR('',#8139,1.);+#8139 = DIRECTION('',(1.,0.));+#8140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8141 = ORIENTED_EDGE('',*,*,#8142,.T.);+#8142 = EDGE_CURVE('',#8120,#8143,#8145,.T.);+#8143 = VERTEX_POINT('',#8144);+#8144 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.1500001+ ));+#8145 = SURFACE_CURVE('',#8146,(#8150,#8157),.PCURVE_S1.);+#8146 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8147,#8148,#8149),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8147 = CARTESIAN_POINT('',(0.251740279149,-4.279545120122E-03,1.1500001+ ));+#8148 = CARTESIAN_POINT('',(0.248609871145,-7.370327706877E-03,1.1500001+ ));+#8149 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.1500001+ ));+#8150 = PCURVE('',#8013,#8151);+#8151 = DEFINITIONAL_REPRESENTATION('',(#8152),#8156);+#8152 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8153,#8154,#8155),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8153 = CARTESIAN_POINT('',(5.630771866383E-02,5.190929729037E-02));+#8154 = CARTESIAN_POINT('',(5.31773106593E-02,4.881851470362E-02));+#8155 = CARTESIAN_POINT('',(4.86600130325E-02,4.881851470362E-02));+#8156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8157 = PCURVE('',#7884,#8158);+#8158 = DEFINITIONAL_REPRESENTATION('',(#8159),#8163);+#8159 = LINE('',#8160,#8161);+#8160 = CARTESIAN_POINT('',(0.,-0.1));+#8161 = VECTOR('',#8162,1.);+#8162 = DIRECTION('',(1.,0.));+#8163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8164 = ORIENTED_EDGE('',*,*,#8165,.T.);+#8165 = EDGE_CURVE('',#8143,#8166,#8168,.T.);+#8166 = VERTEX_POINT('',#8167);+#8167 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.1500001)+ );+#8168 = SURFACE_CURVE('',#8169,(#8173,#8180),.PCURVE_S1.);+#8169 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8170,#8171,#8172),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8170 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.1500001+ ));+#8171 = CARTESIAN_POINT('',(0.239654526727,-7.370327706877E-03,1.1500001+ ));+#8172 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.1500001)+ );+#8173 = PCURVE('',#8013,#8174);+#8174 = DEFINITIONAL_REPRESENTATION('',(#8175),#8179);+#8175 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8176,#8177,#8178),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8176 = CARTESIAN_POINT('',(4.86600130325E-02,4.881851470362E-02));+#8177 = CARTESIAN_POINT('',(4.422196624126E-02,4.881851470362E-02));+#8178 = CARTESIAN_POINT('',(4.125005990785E-02,5.183004645481E-02));+#8179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8180 = PCURVE('',#7920,#8181);+#8181 = DEFINITIONAL_REPRESENTATION('',(#8182),#8186);+#8182 = LINE('',#8183,#8184);+#8183 = CARTESIAN_POINT('',(0.,-0.1));+#8184 = VECTOR('',#8185,1.);+#8185 = DIRECTION('',(1.,0.));+#8186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8187 = ORIENTED_EDGE('',*,*,#8188,.T.);+#8188 = EDGE_CURVE('',#8166,#8050,#8189,.T.);+#8189 = SURFACE_CURVE('',#8190,(#8194,#8201),.PCURVE_S1.);+#8190 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8191,#8192,#8193),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8191 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.1500001)+ );+#8192 = CARTESIAN_POINT('',(0.23371071406,-1.347264204483E-03,1.1500001)+ );+#8193 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.1500001)+ );+#8194 = PCURVE('',#8013,#8195);+#8195 = DEFINITIONAL_REPRESENTATION('',(#8196),#8200);+#8196 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8197,#8198,#8199),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8197 = CARTESIAN_POINT('',(4.125005990785E-02,5.183004645481E-02));+#8198 = CARTESIAN_POINT('',(3.827815357443E-02,5.484157820601E-02));+#8199 = CARTESIAN_POINT('',(3.827815357443E-02,5.943812666837E-02));+#8200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8201 = PCURVE('',#7954,#8202);+#8202 = DEFINITIONAL_REPRESENTATION('',(#8203),#8207);+#8203 = LINE('',#8204,#8205);+#8204 = CARTESIAN_POINT('',(0.,-0.1));+#8205 = VECTOR('',#8206,1.);+#8206 = DIRECTION('',(1.,0.));+#8207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8208 = ADVANCED_FACE('',(#8209),#7776,.T.);+#8209 = FACE_BOUND('',#8210,.T.);+#8210 = EDGE_LOOP('',(#8211,#8212,#8213,#8214));+#8211 = ORIENTED_EDGE('',*,*,#7756,.T.);+#8212 = ORIENTED_EDGE('',*,*,#8025,.T.);+#8213 = ORIENTED_EDGE('',*,*,#8073,.T.);+#8214 = ORIENTED_EDGE('',*,*,#8215,.F.);+#8215 = EDGE_CURVE('',#7757,#8074,#8216,.T.);+#8216 = SURFACE_CURVE('',#8217,(#8221,#8228),.PCURVE_S1.);+#8217 = LINE('',#8218,#8219);+#8218 = CARTESIAN_POINT('',(0.251700653732,1.077811363586E-02,1.2500001)+ );+#8219 = VECTOR('',#8220,1.);+#8220 = DIRECTION('',(-0.,-0.,-1.));+#8221 = PCURVE('',#7776,#8222);+#8222 = DEFINITIONAL_REPRESENTATION('',(#8223),#8227);+#8223 = LINE('',#8224,#8225);+#8224 = CARTESIAN_POINT('',(1.,0.));+#8225 = VECTOR('',#8226,1.);+#8226 = DIRECTION('',(0.,-1.));+#8227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8228 = PCURVE('',#7812,#8229);+#8229 = DEFINITIONAL_REPRESENTATION('',(#8230),#8234);+#8230 = LINE('',#8231,#8232);+#8231 = CARTESIAN_POINT('',(0.,0.));+#8232 = VECTOR('',#8233,1.);+#8233 = DIRECTION('',(0.,-1.));+#8234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8235 = ADVANCED_FACE('',(#8236),#7812,.T.);+#8236 = FACE_BOUND('',#8237,.T.);+#8237 = EDGE_LOOP('',(#8238,#8239,#8240,#8241));+#8238 = ORIENTED_EDGE('',*,*,#7792,.T.);+#8239 = ORIENTED_EDGE('',*,*,#8215,.T.);+#8240 = ORIENTED_EDGE('',*,*,#8096,.T.);+#8241 = ORIENTED_EDGE('',*,*,#8242,.F.);+#8242 = EDGE_CURVE('',#7793,#8097,#8243,.T.);+#8243 = SURFACE_CURVE('',#8244,(#8248,#8255),.PCURVE_S1.);+#8244 = LINE('',#8245,#8246);+#8245 = CARTESIAN_POINT('',(0.254870687154,3.249284257871E-03,1.2500001)+ );+#8246 = VECTOR('',#8247,1.);+#8247 = DIRECTION('',(-0.,-0.,-1.));+#8248 = PCURVE('',#7812,#8249);+#8249 = DEFINITIONAL_REPRESENTATION('',(#8250),#8254);+#8250 = LINE('',#8251,#8252);+#8251 = CARTESIAN_POINT('',(1.,0.));+#8252 = VECTOR('',#8253,1.);+#8253 = DIRECTION('',(0.,-1.));+#8254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8255 = PCURVE('',#7848,#8256);+#8256 = DEFINITIONAL_REPRESENTATION('',(#8257),#8261);+#8257 = LINE('',#8258,#8259);+#8258 = CARTESIAN_POINT('',(0.,0.));+#8259 = VECTOR('',#8260,1.);+#8260 = DIRECTION('',(0.,-1.));+#8261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8262 = ADVANCED_FACE('',(#8263),#7848,.T.);+#8263 = FACE_BOUND('',#8264,.T.);+#8264 = EDGE_LOOP('',(#8265,#8266,#8267,#8268));+#8265 = ORIENTED_EDGE('',*,*,#7828,.T.);+#8266 = ORIENTED_EDGE('',*,*,#8242,.T.);+#8267 = ORIENTED_EDGE('',*,*,#8119,.T.);+#8268 = ORIENTED_EDGE('',*,*,#8269,.F.);+#8269 = EDGE_CURVE('',#7829,#8120,#8270,.T.);+#8270 = SURFACE_CURVE('',#8271,(#8275,#8282),.PCURVE_S1.);+#8271 = LINE('',#8272,#8273);+#8272 = CARTESIAN_POINT('',(0.251740279149,-4.279545120122E-03,1.2500001+ ));+#8273 = VECTOR('',#8274,1.);+#8274 = DIRECTION('',(-0.,-0.,-1.));+#8275 = PCURVE('',#7848,#8276);+#8276 = DEFINITIONAL_REPRESENTATION('',(#8277),#8281);+#8277 = LINE('',#8278,#8279);+#8278 = CARTESIAN_POINT('',(1.,0.));+#8279 = VECTOR('',#8280,1.);+#8280 = DIRECTION('',(0.,-1.));+#8281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8282 = PCURVE('',#7884,#8283);+#8283 = DEFINITIONAL_REPRESENTATION('',(#8284),#8288);+#8284 = LINE('',#8285,#8286);+#8285 = CARTESIAN_POINT('',(0.,0.));+#8286 = VECTOR('',#8287,1.);+#8287 = DIRECTION('',(0.,-1.));+#8288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8289 = ADVANCED_FACE('',(#8290),#7884,.T.);+#8290 = FACE_BOUND('',#8291,.T.);+#8291 = EDGE_LOOP('',(#8292,#8293,#8294,#8295));+#8292 = ORIENTED_EDGE('',*,*,#7864,.T.);+#8293 = ORIENTED_EDGE('',*,*,#8269,.T.);+#8294 = ORIENTED_EDGE('',*,*,#8142,.T.);+#8295 = ORIENTED_EDGE('',*,*,#8296,.F.);+#8296 = EDGE_CURVE('',#7865,#8143,#8297,.T.);+#8297 = SURFACE_CURVE('',#8298,(#8302,#8309),.PCURVE_S1.);+#8298 = LINE('',#8299,#8300);+#8299 = CARTESIAN_POINT('',(0.244092573518,-7.370327706877E-03,1.2500001+ ));+#8300 = VECTOR('',#8301,1.);+#8301 = DIRECTION('',(-0.,-0.,-1.));+#8302 = PCURVE('',#7884,#8303);+#8303 = DEFINITIONAL_REPRESENTATION('',(#8304),#8308);+#8304 = LINE('',#8305,#8306);+#8305 = CARTESIAN_POINT('',(1.,0.));+#8306 = VECTOR('',#8307,1.);+#8307 = DIRECTION('',(0.,-1.));+#8308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8309 = PCURVE('',#7920,#8310);+#8310 = DEFINITIONAL_REPRESENTATION('',(#8311),#8315);+#8311 = LINE('',#8312,#8313);+#8312 = CARTESIAN_POINT('',(0.,0.));+#8313 = VECTOR('',#8314,1.);+#8314 = DIRECTION('',(0.,-1.));+#8315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8316 = ADVANCED_FACE('',(#8317),#7920,.T.);+#8317 = FACE_BOUND('',#8318,.T.);+#8318 = EDGE_LOOP('',(#8319,#8320,#8321,#8322));+#8319 = ORIENTED_EDGE('',*,*,#7900,.T.);+#8320 = ORIENTED_EDGE('',*,*,#8296,.T.);+#8321 = ORIENTED_EDGE('',*,*,#8165,.T.);+#8322 = ORIENTED_EDGE('',*,*,#8323,.F.);+#8323 = EDGE_CURVE('',#7901,#8166,#8324,.T.);+#8324 = SURFACE_CURVE('',#8325,(#8329,#8336),.PCURVE_S1.);+#8325 = LINE('',#8326,#8327);+#8326 = CARTESIAN_POINT('',(0.236682620393,-4.35879595568E-03,1.2500001)+ );+#8327 = VECTOR('',#8328,1.);+#8328 = DIRECTION('',(-0.,-0.,-1.));+#8329 = PCURVE('',#7920,#8330);+#8330 = DEFINITIONAL_REPRESENTATION('',(#8331),#8335);+#8331 = LINE('',#8332,#8333);+#8332 = CARTESIAN_POINT('',(1.,0.));+#8333 = VECTOR('',#8334,1.);+#8334 = DIRECTION('',(0.,-1.));+#8335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8336 = PCURVE('',#7954,#8337);+#8337 = DEFINITIONAL_REPRESENTATION('',(#8338),#8342);+#8338 = LINE('',#8339,#8340);+#8339 = CARTESIAN_POINT('',(0.,0.));+#8340 = VECTOR('',#8341,1.);+#8341 = DIRECTION('',(0.,-1.));+#8342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8343 = ADVANCED_FACE('',(#8344),#7954,.T.);+#8344 = FACE_BOUND('',#8345,.T.);+#8345 = EDGE_LOOP('',(#8346,#8347,#8348,#8349));+#8346 = ORIENTED_EDGE('',*,*,#7936,.T.);+#8347 = ORIENTED_EDGE('',*,*,#8323,.T.);+#8348 = ORIENTED_EDGE('',*,*,#8188,.T.);+#8349 = ORIENTED_EDGE('',*,*,#8350,.F.);+#8350 = EDGE_CURVE('',#7685,#8050,#8351,.T.);+#8351 = SURFACE_CURVE('',#8352,(#8356,#8363),.PCURVE_S1.);+#8352 = LINE('',#8353,#8354);+#8353 = CARTESIAN_POINT('',(0.23371071406,3.249284257871E-03,1.2500001)+ );+#8354 = VECTOR('',#8355,1.);+#8355 = DIRECTION('',(-0.,-0.,-1.));+#8356 = PCURVE('',#7954,#8357);+#8357 = DEFINITIONAL_REPRESENTATION('',(#8358),#8362);+#8358 = LINE('',#8359,#8360);+#8359 = CARTESIAN_POINT('',(1.,0.));+#8360 = VECTOR('',#8361,1.);+#8361 = DIRECTION('',(0.,-1.));+#8362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8363 = PCURVE('',#7704,#8364);+#8364 = DEFINITIONAL_REPRESENTATION('',(#8365),#8369);+#8365 = LINE('',#8366,#8367);+#8366 = CARTESIAN_POINT('',(0.,0.));+#8367 = VECTOR('',#8368,1.);+#8368 = DIRECTION('',(0.,-1.));+#8369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8370 = ADVANCED_FACE('',(#8371),#7704,.T.);+#8371 = FACE_BOUND('',#8372,.T.);+#8372 = EDGE_LOOP('',(#8373,#8374,#8375,#8376));+#8373 = ORIENTED_EDGE('',*,*,#7682,.T.);+#8374 = ORIENTED_EDGE('',*,*,#8350,.T.);+#8375 = ORIENTED_EDGE('',*,*,#8049,.T.);+#8376 = ORIENTED_EDGE('',*,*,#7974,.F.);+#8377 = ADVANCED_FACE('',(#8378),#7333,.T.);+#8378 = FACE_BOUND('',#8379,.T.);+#8379 = EDGE_LOOP('',(#8380,#8381,#8402,#8403));+#8380 = ORIENTED_EDGE('',*,*,#7652,.T.);+#8381 = ORIENTED_EDGE('',*,*,#8382,.T.);+#8382 = EDGE_CURVE('',#7624,#7288,#8383,.T.);+#8383 = SURFACE_CURVE('',#8384,(#8388,#8395),.PCURVE_S1.);+#8384 = LINE('',#8385,#8386);+#8385 = CARTESIAN_POINT('',(0.266520559981,2.853030080082E-03,1.2500001)+ );+#8386 = VECTOR('',#8387,1.);+#8387 = DIRECTION('',(-0.,-0.,-1.));+#8388 = PCURVE('',#7333,#8389);+#8389 = DEFINITIONAL_REPRESENTATION('',(#8390),#8394);+#8390 = LINE('',#8391,#8392);+#8391 = CARTESIAN_POINT('',(0.,0.));+#8392 = VECTOR('',#8393,1.);+#8393 = DIRECTION('',(0.,-1.));+#8394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8395 = PCURVE('',#7303,#8396);+#8396 = DEFINITIONAL_REPRESENTATION('',(#8397),#8401);+#8397 = LINE('',#8398,#8399);+#8398 = CARTESIAN_POINT('',(1.,0.));+#8399 = VECTOR('',#8400,1.);+#8400 = DIRECTION('',(0.,-1.));+#8401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8402 = ORIENTED_EDGE('',*,*,#7317,.T.);+#8403 = ORIENTED_EDGE('',*,*,#7414,.F.);+#8404 = ADVANCED_FACE('',(#8405),#7303,.T.);+#8405 = FACE_BOUND('',#8406,.T.);+#8406 = EDGE_LOOP('',(#8407,#8408,#8429,#8430));+#8407 = ORIENTED_EDGE('',*,*,#7623,.T.);+#8408 = ORIENTED_EDGE('',*,*,#8409,.T.);+#8409 = EDGE_CURVE('',#7586,#7258,#8410,.T.);+#8410 = SURFACE_CURVE('',#8411,(#8415,#8422),.PCURVE_S1.);+#8411 = LINE('',#8412,#8413);+#8412 = CARTESIAN_POINT('',(0.26101262691,-3.376085594763E-02,1.2500001)+ );+#8413 = VECTOR('',#8414,1.);+#8414 = DIRECTION('',(-0.,-0.,-1.));+#8415 = PCURVE('',#7303,#8416);+#8416 = DEFINITIONAL_REPRESENTATION('',(#8417),#8421);+#8417 = LINE('',#8418,#8419);+#8418 = CARTESIAN_POINT('',(0.,0.));+#8419 = VECTOR('',#8420,1.);+#8420 = DIRECTION('',(0.,-1.));+#8421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8422 = PCURVE('',#7273,#8423);+#8423 = DEFINITIONAL_REPRESENTATION('',(#8424),#8428);+#8424 = LINE('',#8425,#8426);+#8425 = CARTESIAN_POINT('',(1.,0.));+#8426 = VECTOR('',#8427,1.);+#8427 = DIRECTION('',(0.,-1.));+#8428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8429 = ORIENTED_EDGE('',*,*,#7287,.T.);+#8430 = ORIENTED_EDGE('',*,*,#8382,.F.);+#8431 = ADVANCED_FACE('',(#8432),#7273,.T.);+#8432 = FACE_BOUND('',#8433,.T.);+#8433 = EDGE_LOOP('',(#8434,#8435,#8456,#8457));+#8434 = ORIENTED_EDGE('',*,*,#7585,.T.);+#8435 = ORIENTED_EDGE('',*,*,#8436,.T.);+#8436 = EDGE_CURVE('',#7557,#7228,#8437,.T.);+#8437 = SURFACE_CURVE('',#8438,(#8442,#8449),.PCURVE_S1.);+#8438 = LINE('',#8439,#8440);+#8439 = CARTESIAN_POINT('',(0.244251075189,-4.580698295242E-02,1.2500001+ ));+#8440 = VECTOR('',#8441,1.);+#8441 = DIRECTION('',(-0.,-0.,-1.));+#8442 = PCURVE('',#7273,#8443);+#8443 = DEFINITIONAL_REPRESENTATION('',(#8444),#8448);+#8444 = LINE('',#8445,#8446);+#8445 = CARTESIAN_POINT('',(0.,0.));+#8446 = VECTOR('',#8447,1.);+#8447 = DIRECTION('',(0.,-1.));+#8448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8449 = PCURVE('',#7243,#8450);+#8450 = DEFINITIONAL_REPRESENTATION('',(#8451),#8455);+#8451 = LINE('',#8452,#8453);+#8452 = CARTESIAN_POINT('',(1.,0.));+#8453 = VECTOR('',#8454,1.);+#8454 = DIRECTION('',(0.,-1.));+#8455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8456 = ORIENTED_EDGE('',*,*,#7257,.T.);+#8457 = ORIENTED_EDGE('',*,*,#8409,.F.);+#8458 = ADVANCED_FACE('',(#8459),#7243,.T.);+#8459 = FACE_BOUND('',#8460,.T.);+#8460 = EDGE_LOOP('',(#8461,#8462,#8483,#8484));+#8461 = ORIENTED_EDGE('',*,*,#7556,.T.);+#8462 = ORIENTED_EDGE('',*,*,#8463,.T.);+#8463 = EDGE_CURVE('',#7528,#7198,#8464,.T.);+#8464 = SURFACE_CURVE('',#8465,(#8469,#8476),.PCURVE_S1.);+#8465 = LINE('',#8466,#8467);+#8466 = CARTESIAN_POINT('',(0.227568774304,-3.376085594763E-02,1.2500001+ ));+#8467 = VECTOR('',#8468,1.);+#8468 = DIRECTION('',(-0.,-0.,-1.));+#8469 = PCURVE('',#7243,#8470);+#8470 = DEFINITIONAL_REPRESENTATION('',(#8471),#8475);+#8471 = LINE('',#8472,#8473);+#8472 = CARTESIAN_POINT('',(0.,0.));+#8473 = VECTOR('',#8474,1.);+#8474 = DIRECTION('',(0.,-1.));+#8475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8476 = PCURVE('',#7213,#8477);+#8477 = DEFINITIONAL_REPRESENTATION('',(#8478),#8482);+#8478 = LINE('',#8479,#8480);+#8479 = CARTESIAN_POINT('',(1.,0.));+#8480 = VECTOR('',#8481,1.);+#8481 = DIRECTION('',(0.,-1.));+#8482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8483 = ORIENTED_EDGE('',*,*,#7227,.T.);+#8484 = ORIENTED_EDGE('',*,*,#8436,.F.);+#8485 = ADVANCED_FACE('',(#8486),#7213,.T.);+#8486 = FACE_BOUND('',#8487,.T.);+#8487 = EDGE_LOOP('',(#8488,#8489,#8510,#8511));+#8488 = ORIENTED_EDGE('',*,*,#7527,.T.);+#8489 = ORIENTED_EDGE('',*,*,#8490,.T.);+#8490 = EDGE_CURVE('',#7499,#7168,#8491,.T.);+#8491 = SURFACE_CURVE('',#8492,(#8496,#8503),.PCURVE_S1.);+#8492 = LINE('',#8493,#8494);+#8493 = CARTESIAN_POINT('',(0.222060841233,2.853030080082E-03,1.2500001)+ );+#8494 = VECTOR('',#8495,1.);+#8495 = DIRECTION('',(-0.,-0.,-1.));+#8496 = PCURVE('',#7213,#8497);+#8497 = DEFINITIONAL_REPRESENTATION('',(#8498),#8502);+#8498 = LINE('',#8499,#8500);+#8499 = CARTESIAN_POINT('',(0.,0.));+#8500 = VECTOR('',#8501,1.);+#8501 = DIRECTION('',(0.,-1.));+#8502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8503 = PCURVE('',#7183,#8504);+#8504 = DEFINITIONAL_REPRESENTATION('',(#8505),#8509);+#8505 = LINE('',#8506,#8507);+#8506 = CARTESIAN_POINT('',(1.,0.));+#8507 = VECTOR('',#8508,1.);+#8508 = DIRECTION('',(0.,-1.));+#8509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8510 = ORIENTED_EDGE('',*,*,#7197,.T.);+#8511 = ORIENTED_EDGE('',*,*,#8463,.F.);+#8512 = ADVANCED_FACE('',(#8513),#7183,.T.);+#8513 = FACE_BOUND('',#8514,.T.);+#8514 = EDGE_LOOP('',(#8515,#8516,#8537,#8538));+#8515 = ORIENTED_EDGE('',*,*,#7498,.T.);+#8516 = ORIENTED_EDGE('',*,*,#8517,.T.);+#8517 = EDGE_CURVE('',#7461,#7138,#8518,.T.);+#8518 = SURFACE_CURVE('',#8519,(#8523,#8530),.PCURVE_S1.);+#8519 = LINE('',#8520,#8521);+#8520 = CARTESIAN_POINT('',(0.227568774304,3.954616694335E-02,1.2500001)+ );+#8521 = VECTOR('',#8522,1.);+#8522 = DIRECTION('',(-0.,-0.,-1.));+#8523 = PCURVE('',#7183,#8524);+#8524 = DEFINITIONAL_REPRESENTATION('',(#8525),#8529);+#8525 = LINE('',#8526,#8527);+#8526 = CARTESIAN_POINT('',(0.,0.));+#8527 = VECTOR('',#8528,1.);+#8528 = DIRECTION('',(0.,-1.));+#8529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8530 = PCURVE('',#7153,#8531);+#8531 = DEFINITIONAL_REPRESENTATION('',(#8532),#8536);+#8532 = LINE('',#8533,#8534);+#8533 = CARTESIAN_POINT('',(1.,0.));+#8534 = VECTOR('',#8535,1.);+#8535 = DIRECTION('',(0.,-1.));+#8536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8537 = ORIENTED_EDGE('',*,*,#7167,.T.);+#8538 = ORIENTED_EDGE('',*,*,#8490,.F.);+#8539 = ADVANCED_FACE('',(#8540),#7153,.T.);+#8540 = FACE_BOUND('',#8541,.T.);+#8541 = EDGE_LOOP('',(#8542,#8543,#8544,#8545));+#8542 = ORIENTED_EDGE('',*,*,#7460,.T.);+#8543 = ORIENTED_EDGE('',*,*,#7436,.T.);+#8544 = ORIENTED_EDGE('',*,*,#7135,.T.);+#8545 = ORIENTED_EDGE('',*,*,#8517,.F.);+#8546 = ADVANCED_FACE('',(#8547),#4714,.T.);+#8547 = FACE_BOUND('',#8548,.T.);+#8548 = EDGE_LOOP('',(#8549,#8550,#8571,#8572));+#8549 = ORIENTED_EDGE('',*,*,#4694,.T.);+#8550 = ORIENTED_EDGE('',*,*,#8551,.T.);+#8551 = EDGE_CURVE('',#4659,#7089,#8552,.T.);+#8552 = SURFACE_CURVE('',#8553,(#8557,#8564),.PCURVE_S1.);+#8553 = LINE('',#8554,#8555);+#8554 = CARTESIAN_POINT('',(0.205972921615,2.853030080082E-03,1.2500001)+ );+#8555 = VECTOR('',#8556,1.);+#8556 = DIRECTION('',(-0.,-0.,-1.));+#8557 = PCURVE('',#4714,#8558);+#8558 = DEFINITIONAL_REPRESENTATION('',(#8559),#8563);+#8559 = LINE('',#8560,#8561);+#8560 = CARTESIAN_POINT('',(0.,0.));+#8561 = VECTOR('',#8562,1.);+#8562 = DIRECTION('',(0.,-1.));+#8563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8564 = PCURVE('',#4678,#8565);+#8565 = DEFINITIONAL_REPRESENTATION('',(#8566),#8570);+#8566 = LINE('',#8567,#8568);+#8567 = CARTESIAN_POINT('',(1.,0.));+#8568 = VECTOR('',#8569,1.);+#8569 = DIRECTION('',(0.,-1.));+#8570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8571 = ORIENTED_EDGE('',*,*,#7111,.T.);+#8572 = ORIENTED_EDGE('',*,*,#6898,.F.);+#8573 = ADVANCED_FACE('',(#8574),#4678,.T.);+#8574 = FACE_BOUND('',#8575,.T.);+#8575 = EDGE_LOOP('',(#8576,#8577,#8598,#8599));+#8576 = ORIENTED_EDGE('',*,*,#4658,.T.);+#8577 = ORIENTED_EDGE('',*,*,#8578,.T.);+#8578 = EDGE_CURVE('',#4623,#7066,#8579,.T.);+#8579 = SURFACE_CURVE('',#8580,(#8584,#8591),.PCURVE_S1.);+#8580 = LINE('',#8581,#8582);+#8581 = CARTESIAN_POINT('',(0.215641523553,-4.295395287234E-02,1.2500001+ ));+#8582 = VECTOR('',#8583,1.);+#8583 = DIRECTION('',(-0.,-0.,-1.));+#8584 = PCURVE('',#4678,#8585);+#8585 = DEFINITIONAL_REPRESENTATION('',(#8586),#8590);+#8586 = LINE('',#8587,#8588);+#8587 = CARTESIAN_POINT('',(0.,0.));+#8588 = VECTOR('',#8589,1.);+#8589 = DIRECTION('',(0.,-1.));+#8590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8591 = PCURVE('',#4642,#8592);+#8592 = DEFINITIONAL_REPRESENTATION('',(#8593),#8597);+#8593 = LINE('',#8594,#8595);+#8594 = CARTESIAN_POINT('',(1.,0.));+#8595 = VECTOR('',#8596,1.);+#8596 = DIRECTION('',(0.,-1.));+#8597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8598 = ORIENTED_EDGE('',*,*,#7088,.T.);+#8599 = ORIENTED_EDGE('',*,*,#8551,.F.);+#8600 = ADVANCED_FACE('',(#8601),#4642,.T.);+#8601 = FACE_BOUND('',#8602,.T.);+#8602 = EDGE_LOOP('',(#8603,#8604,#8625,#8626));+#8603 = ORIENTED_EDGE('',*,*,#4622,.T.);+#8604 = ORIENTED_EDGE('',*,*,#8605,.T.);+#8605 = EDGE_CURVE('',#4587,#7043,#8606,.T.);+#8606 = SURFACE_CURVE('',#8607,(#8611,#8618),.PCURVE_S1.);+#8607 = LINE('',#8608,#8609);+#8608 = CARTESIAN_POINT('',(0.244251075189,-5.848711664167E-02,1.2500001+ ));+#8609 = VECTOR('',#8610,1.);+#8610 = DIRECTION('',(-0.,-0.,-1.));+#8611 = PCURVE('',#4642,#8612);+#8612 = DEFINITIONAL_REPRESENTATION('',(#8613),#8617);+#8613 = LINE('',#8614,#8615);+#8614 = CARTESIAN_POINT('',(0.,0.));+#8615 = VECTOR('',#8616,1.);+#8616 = DIRECTION('',(0.,-1.));+#8617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8618 = PCURVE('',#4606,#8619);+#8619 = DEFINITIONAL_REPRESENTATION('',(#8620),#8624);+#8620 = LINE('',#8621,#8622);+#8621 = CARTESIAN_POINT('',(1.,0.));+#8622 = VECTOR('',#8623,1.);+#8623 = DIRECTION('',(0.,-1.));+#8624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8625 = ORIENTED_EDGE('',*,*,#7065,.T.);+#8626 = ORIENTED_EDGE('',*,*,#8578,.F.);+#8627 = ADVANCED_FACE('',(#8628),#4606,.T.);+#8628 = FACE_BOUND('',#8629,.T.);+#8629 = EDGE_LOOP('',(#8630,#8631,#8652,#8653));+#8630 = ORIENTED_EDGE('',*,*,#4586,.T.);+#8631 = ORIENTED_EDGE('',*,*,#8632,.T.);+#8632 = EDGE_CURVE('',#4551,#7020,#8633,.T.);+#8633 = SURFACE_CURVE('',#8634,(#8638,#8645),.PCURVE_S1.);+#8634 = LINE('',#8635,#8636);+#8635 = CARTESIAN_POINT('',(0.272900252243,-4.295395287234E-02,1.2500001+ ));+#8636 = VECTOR('',#8637,1.);+#8637 = DIRECTION('',(-0.,-0.,-1.));+#8638 = PCURVE('',#4606,#8639);+#8639 = DEFINITIONAL_REPRESENTATION('',(#8640),#8644);+#8640 = LINE('',#8641,#8642);+#8641 = CARTESIAN_POINT('',(0.,0.));+#8642 = VECTOR('',#8643,1.);+#8643 = DIRECTION('',(0.,-1.));+#8644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8645 = PCURVE('',#4570,#8646);+#8646 = DEFINITIONAL_REPRESENTATION('',(#8647),#8651);+#8647 = LINE('',#8648,#8649);+#8648 = CARTESIAN_POINT('',(1.,0.));+#8649 = VECTOR('',#8650,1.);+#8650 = DIRECTION('',(0.,-1.));+#8651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8652 = ORIENTED_EDGE('',*,*,#7042,.T.);+#8653 = ORIENTED_EDGE('',*,*,#8605,.F.);+#8654 = ADVANCED_FACE('',(#8655),#4570,.T.);+#8655 = FACE_BOUND('',#8656,.T.);+#8656 = EDGE_LOOP('',(#8657,#8658,#8679,#8680));+#8657 = ORIENTED_EDGE('',*,*,#4550,.T.);+#8658 = ORIENTED_EDGE('',*,*,#8659,.T.);+#8659 = EDGE_CURVE('',#4515,#6997,#8660,.T.);+#8660 = SURFACE_CURVE('',#8661,(#8665,#8672),.PCURVE_S1.);+#8661 = LINE('',#8662,#8663);+#8662 = CARTESIAN_POINT('',(0.282608479599,2.853030080082E-03,1.2500001)+ );+#8663 = VECTOR('',#8664,1.);+#8664 = DIRECTION('',(-0.,-0.,-1.));+#8665 = PCURVE('',#4570,#8666);+#8666 = DEFINITIONAL_REPRESENTATION('',(#8667),#8671);+#8667 = LINE('',#8668,#8669);+#8668 = CARTESIAN_POINT('',(0.,0.));+#8669 = VECTOR('',#8670,1.);+#8670 = DIRECTION('',(0.,-1.));+#8671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8672 = PCURVE('',#4534,#8673);+#8673 = DEFINITIONAL_REPRESENTATION('',(#8674),#8678);+#8674 = LINE('',#8675,#8676);+#8675 = CARTESIAN_POINT('',(1.,0.));+#8676 = VECTOR('',#8677,1.);+#8677 = DIRECTION('',(0.,-1.));+#8678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8679 = ORIENTED_EDGE('',*,*,#7019,.T.);+#8680 = ORIENTED_EDGE('',*,*,#8632,.F.);+#8681 = ADVANCED_FACE('',(#8682),#4534,.T.);+#8682 = FACE_BOUND('',#8683,.T.);+#8683 = EDGE_LOOP('',(#8684,#8685,#8706,#8707));+#8684 = ORIENTED_EDGE('',*,*,#4514,.T.);+#8685 = ORIENTED_EDGE('',*,*,#8686,.T.);+#8686 = EDGE_CURVE('',#4477,#6974,#8687,.T.);+#8687 = SURFACE_CURVE('',#8688,(#8692,#8699),.PCURVE_S1.);+#8688 = LINE('',#8689,#8690);+#8689 = CARTESIAN_POINT('',(0.272900252243,4.873926386806E-02,1.2500001)+ );+#8690 = VECTOR('',#8691,1.);+#8691 = DIRECTION('',(-0.,-0.,-1.));+#8692 = PCURVE('',#4534,#8693);+#8693 = DEFINITIONAL_REPRESENTATION('',(#8694),#8698);+#8694 = LINE('',#8695,#8696);+#8695 = CARTESIAN_POINT('',(0.,0.));+#8696 = VECTOR('',#8697,1.);+#8697 = DIRECTION('',(0.,-1.));+#8698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8699 = PCURVE('',#4498,#8700);+#8700 = DEFINITIONAL_REPRESENTATION('',(#8701),#8705);+#8701 = LINE('',#8702,#8703);+#8702 = CARTESIAN_POINT('',(1.,0.));+#8703 = VECTOR('',#8704,1.);+#8704 = DIRECTION('',(0.,-1.));+#8705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8706 = ORIENTED_EDGE('',*,*,#6996,.T.);+#8707 = ORIENTED_EDGE('',*,*,#8659,.F.);+#8708 = ADVANCED_FACE('',(#8709),#4498,.T.);+#8709 = FACE_BOUND('',#8710,.T.);+#8710 = EDGE_LOOP('',(#8711,#8712,#8713,#8714));+#8711 = ORIENTED_EDGE('',*,*,#4476,.T.);+#8712 = ORIENTED_EDGE('',*,*,#6949,.T.);+#8713 = ORIENTED_EDGE('',*,*,#6973,.T.);+#8714 = ORIENTED_EDGE('',*,*,#8686,.F.);+#8715 = ADVANCED_FACE('',(#8716),#4455,.T.);+#8716 = FACE_BOUND('',#8717,.T.);+#8717 = EDGE_LOOP('',(#8718,#8719,#8742,#8770));+#8718 = ORIENTED_EDGE('',*,*,#4431,.T.);+#8719 = ORIENTED_EDGE('',*,*,#8720,.T.);+#8720 = EDGE_CURVE('',#4396,#8721,#8723,.T.);+#8721 = VERTEX_POINT('',#8722);+#8722 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.1500001)+ );+#8723 = SURFACE_CURVE('',#8724,(#8728,#8735),.PCURVE_S1.);+#8724 = LINE('',#8725,#8726);+#8725 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.2500001)+ );+#8726 = VECTOR('',#8727,1.);+#8727 = DIRECTION('',(-0.,-0.,-1.));+#8728 = PCURVE('',#4455,#8729);+#8729 = DEFINITIONAL_REPRESENTATION('',(#8730),#8734);+#8730 = LINE('',#8731,#8732);+#8731 = CARTESIAN_POINT('',(0.,0.));+#8732 = VECTOR('',#8733,1.);+#8733 = DIRECTION('',(0.,-1.));+#8734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8735 = PCURVE('',#4415,#8736);+#8736 = DEFINITIONAL_REPRESENTATION('',(#8737),#8741);+#8737 = LINE('',#8738,#8739);+#8738 = CARTESIAN_POINT('',(1.,0.));+#8739 = VECTOR('',#8740,1.);+#8740 = DIRECTION('',(0.,-1.));+#8741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8742 = ORIENTED_EDGE('',*,*,#8743,.T.);+#8743 = EDGE_CURVE('',#8721,#8744,#8746,.T.);+#8744 = VERTEX_POINT('',#8745);+#8745 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.1500001)+ );+#8746 = SURFACE_CURVE('',#8747,(#8751,#8758),.PCURVE_S1.);+#8747 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8748,#8749,#8750),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8748 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.1500001)+ );+#8749 = CARTESIAN_POINT('',(0.127593845248,6.427242763739E-02,1.1500001)+ );+#8750 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.1500001)+ );+#8751 = PCURVE('',#4455,#8752);+#8752 = DEFINITIONAL_REPRESENTATION('',(#8753),#8757);+#8753 = LINE('',#8754,#8755);+#8754 = CARTESIAN_POINT('',(0.,-0.1));+#8755 = VECTOR('',#8756,1.);+#8756 = DIRECTION('',(1.,0.));+#8757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8758 = PCURVE('',#8759,#8764);+#8759 = PLANE('',#8760);+#8760 = AXIS2_PLACEMENT_3D('',#8761,#8762,#8763);+#8761 = CARTESIAN_POINT('',(9.771628024279E-02,-5.618884241049E-02,+ 1.1500001));+#8762 = DIRECTION('',(0.,0.,1.));+#8763 = DIRECTION('',(1.,0.,0.));+#8764 = DEFINITIONAL_REPRESENTATION('',(#8765),#8769);+#8765 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8766,#8767,#8768),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8766 = CARTESIAN_POINT('',(2.020896306724E-02,0.104928106279));+#8767 = CARTESIAN_POINT('',(2.98775650053E-02,0.120461270048));+#8768 = CARTESIAN_POINT('',(4.881851470362E-02,0.120461270048));+#8769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8770 = ORIENTED_EDGE('',*,*,#8771,.F.);+#8771 = EDGE_CURVE('',#4180,#8744,#8772,.T.);+#8772 = SURFACE_CURVE('',#8773,(#8777,#8784),.PCURVE_S1.);+#8773 = LINE('',#8774,#8775);+#8774 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.2500001)+ );+#8775 = VECTOR('',#8776,1.);+#8776 = DIRECTION('',(-0.,-0.,-1.));+#8777 = PCURVE('',#4455,#8778);+#8778 = DEFINITIONAL_REPRESENTATION('',(#8779),#8783);+#8779 = LINE('',#8780,#8781);+#8780 = CARTESIAN_POINT('',(1.,0.));+#8781 = VECTOR('',#8782,1.);+#8782 = DIRECTION('',(0.,-1.));+#8783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8784 = PCURVE('',#4199,#8785);+#8785 = DEFINITIONAL_REPRESENTATION('',(#8786),#8790);+#8786 = LINE('',#8787,#8788);+#8787 = CARTESIAN_POINT('',(0.,0.));+#8788 = VECTOR('',#8789,1.);+#8789 = DIRECTION('',(0.,-1.));+#8790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8791 = ADVANCED_FACE('',(#8792,#8954),#8759,.T.);+#8792 = FACE_BOUND('',#8793,.F.);+#8793 = EDGE_LOOP('',(#8794,#8817,#8840,#8863,#8886,#8909,#8932,#8953));+#8794 = ORIENTED_EDGE('',*,*,#8795,.T.);+#8795 = EDGE_CURVE('',#8744,#8796,#8798,.T.);+#8796 = VERTEX_POINT('',#8797);+#8797 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.1500001)+ );+#8798 = SURFACE_CURVE('',#8799,(#8803,#8810),.PCURVE_S1.);+#8799 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8800,#8801,#8802),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8800 = CARTESIAN_POINT('',(0.146534794946,6.427242763739E-02,1.1500001)+ );+#8801 = CARTESIAN_POINT('',(0.165475744645,6.427242763739E-02,1.1500001)+ );+#8802 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.1500001)+ );+#8803 = PCURVE('',#8759,#8804);+#8804 = DEFINITIONAL_REPRESENTATION('',(#8805),#8809);+#8805 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8806,#8807,#8808),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8806 = CARTESIAN_POINT('',(4.881851470362E-02,0.120461270048));+#8807 = CARTESIAN_POINT('',(6.775946440194E-02,0.120461270048));+#8808 = CARTESIAN_POINT('',(7.746769175777E-02,0.104928106279));+#8809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8810 = PCURVE('',#4199,#8811);+#8811 = DEFINITIONAL_REPRESENTATION('',(#8812),#8816);+#8812 = LINE('',#8813,#8814);+#8813 = CARTESIAN_POINT('',(0.,-0.1));+#8814 = VECTOR('',#8815,1.);+#8815 = DIRECTION('',(1.,0.));+#8816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8817 = ORIENTED_EDGE('',*,*,#8818,.T.);+#8818 = EDGE_CURVE('',#8796,#8819,#8821,.T.);+#8819 = VERTEX_POINT('',#8820);+#8820 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.1500001)+ );+#8821 = SURFACE_CURVE('',#8822,(#8826,#8833),.PCURVE_S1.);+#8822 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8823,#8824,#8825),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8823 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.1500001)+ );+#8824 = CARTESIAN_POINT('',(0.184892199356,3.320610009873E-02,1.1500001)+ );+#8825 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.1500001)+ );+#8826 = PCURVE('',#8759,#8827);+#8827 = DEFINITIONAL_REPRESENTATION('',(#8828),#8832);+#8828 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8829,#8830,#8831),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8829 = CARTESIAN_POINT('',(7.746769175777E-02,0.104928106279));+#8830 = CARTESIAN_POINT('',(8.71759191136E-02,8.939494250922E-02));+#8831 = CARTESIAN_POINT('',(8.71759191136E-02,5.904187249058E-02));+#8832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8833 = PCURVE('',#4235,#8834);+#8834 = DEFINITIONAL_REPRESENTATION('',(#8835),#8839);+#8835 = LINE('',#8836,#8837);+#8836 = CARTESIAN_POINT('',(0.,-0.1));+#8837 = VECTOR('',#8838,1.);+#8838 = DIRECTION('',(1.,0.));+#8839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8840 = ORIENTED_EDGE('',*,*,#8841,.T.);+#8841 = EDGE_CURVE('',#8819,#8842,#8844,.T.);+#8842 = VERTEX_POINT('',#8843);+#8843 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,1.1500001+ ));+#8844 = SURFACE_CURVE('',#8845,(#8849,#8856),.PCURVE_S1.);+#8845 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8846,#8847,#8848),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8846 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.1500001)+ );+#8847 = CARTESIAN_POINT('',(0.184892199356,-2.742078910301E-02,1.1500001+ ));+#8848 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,1.1500001+ ));+#8849 = PCURVE('',#8759,#8850);+#8850 = DEFINITIONAL_REPRESENTATION('',(#8851),#8855);+#8851 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8852,#8853,#8854),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8852 = CARTESIAN_POINT('',(8.71759191136E-02,5.904187249058E-02));+#8853 = CARTESIAN_POINT('',(8.71759191136E-02,2.876805330749E-02));+#8854 = CARTESIAN_POINT('',(7.746769175777E-02,1.323488953816E-02));+#8855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8856 = PCURVE('',#4271,#8857);+#8857 = DEFINITIONAL_REPRESENTATION('',(#8858),#8862);+#8858 = LINE('',#8859,#8860);+#8859 = CARTESIAN_POINT('',(0.,-0.1));+#8860 = VECTOR('',#8861,1.);+#8861 = DIRECTION('',(1.,0.));+#8862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8863 = ORIENTED_EDGE('',*,*,#8864,.T.);+#8864 = EDGE_CURVE('',#8842,#8865,#8867,.T.);+#8865 = VERTEX_POINT('',#8866);+#8866 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,1.1500001+ ));+#8867 = SURFACE_CURVE('',#8868,(#8872,#8879),.PCURVE_S1.);+#8868 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8869,#8870,#8871),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8869 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,1.1500001+ ));+#8870 = CARTESIAN_POINT('',(0.165475744645,-5.848711664167E-02,1.1500001+ ));+#8871 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,1.1500001+ ));+#8872 = PCURVE('',#8759,#8873);+#8873 = DEFINITIONAL_REPRESENTATION('',(#8874),#8878);+#8874 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8875,#8876,#8877),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8875 = CARTESIAN_POINT('',(7.746769175777E-02,1.323488953816E-02));+#8876 = CARTESIAN_POINT('',(6.775946440194E-02,-2.298274231177E-03));+#8877 = CARTESIAN_POINT('',(4.881851470362E-02,-2.298274231177E-03));+#8878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8879 = PCURVE('',#4307,#8880);+#8880 = DEFINITIONAL_REPRESENTATION('',(#8881),#8885);+#8881 = LINE('',#8882,#8883);+#8882 = CARTESIAN_POINT('',(0.,-0.1));+#8883 = VECTOR('',#8884,1.);+#8884 = DIRECTION('',(1.,0.));+#8885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8886 = ORIENTED_EDGE('',*,*,#8887,.T.);+#8887 = EDGE_CURVE('',#8865,#8888,#8890,.T.);+#8888 = VERTEX_POINT('',#8889);+#8889 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.1500001)+ );+#8890 = SURFACE_CURVE('',#8891,(#8895,#8902),.PCURVE_S1.);+#8891 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8892,#8893,#8894),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8892 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,1.1500001+ ));+#8893 = CARTESIAN_POINT('',(0.127593845248,-5.848711664167E-02,1.1500001+ ));+#8894 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.1500001)+ );+#8895 = PCURVE('',#8759,#8896);+#8896 = DEFINITIONAL_REPRESENTATION('',(#8897),#8901);+#8897 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8898,#8899,#8900),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8898 = CARTESIAN_POINT('',(4.881851470362E-02,-2.298274231177E-03));+#8899 = CARTESIAN_POINT('',(2.98775650053E-02,-2.298274231177E-03));+#8900 = CARTESIAN_POINT('',(2.020896306724E-02,1.323488953816E-02));+#8901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8902 = PCURVE('',#4343,#8903);+#8903 = DEFINITIONAL_REPRESENTATION('',(#8904),#8908);+#8904 = LINE('',#8905,#8906);+#8905 = CARTESIAN_POINT('',(0.,-0.1));+#8906 = VECTOR('',#8907,1.);+#8907 = DIRECTION('',(1.,0.));+#8908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8909 = ORIENTED_EDGE('',*,*,#8910,.T.);+#8910 = EDGE_CURVE('',#8888,#8911,#8913,.T.);+#8911 = VERTEX_POINT('',#8912);+#8912 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.1500001)+ );+#8913 = SURFACE_CURVE('',#8914,(#8918,#8925),.PCURVE_S1.);+#8914 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8915,#8916,#8917),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8915 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.1500001)+ );+#8916 = CARTESIAN_POINT('',(0.108256641372,-2.742078910301E-02,1.1500001+ ));+#8917 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.1500001)+ );+#8918 = PCURVE('',#8759,#8919);+#8919 = DEFINITIONAL_REPRESENTATION('',(#8920),#8924);+#8920 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8921,#8922,#8923),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8921 = CARTESIAN_POINT('',(2.020896306724E-02,1.323488953816E-02));+#8922 = CARTESIAN_POINT('',(1.054036112919E-02,2.876805330749E-02));+#8923 = CARTESIAN_POINT('',(1.054036112919E-02,5.904187249058E-02));+#8924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8925 = PCURVE('',#4379,#8926);+#8926 = DEFINITIONAL_REPRESENTATION('',(#8927),#8931);+#8927 = LINE('',#8928,#8929);+#8928 = CARTESIAN_POINT('',(0.,-0.1));+#8929 = VECTOR('',#8930,1.);+#8930 = DIRECTION('',(1.,0.));+#8931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8932 = ORIENTED_EDGE('',*,*,#8933,.T.);+#8933 = EDGE_CURVE('',#8911,#8721,#8934,.T.);+#8934 = SURFACE_CURVE('',#8935,(#8939,#8946),.PCURVE_S1.);+#8935 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8936,#8937,#8938),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8936 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.1500001)+ );+#8937 = CARTESIAN_POINT('',(0.108256641372,3.320610009873E-02,1.1500001)+ );+#8938 = CARTESIAN_POINT('',(0.11792524331,4.873926386806E-02,1.1500001)+ );+#8939 = PCURVE('',#8759,#8940);+#8940 = DEFINITIONAL_REPRESENTATION('',(#8941),#8945);+#8941 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8942,#8943,#8944),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8942 = CARTESIAN_POINT('',(1.054036112919E-02,5.904187249058E-02));+#8943 = CARTESIAN_POINT('',(1.054036112919E-02,8.939494250922E-02));+#8944 = CARTESIAN_POINT('',(2.020896306724E-02,0.104928106279));+#8945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8946 = PCURVE('',#4415,#8947);+#8947 = DEFINITIONAL_REPRESENTATION('',(#8948),#8952);+#8948 = LINE('',#8949,#8950);+#8949 = CARTESIAN_POINT('',(0.,-0.1));+#8950 = VECTOR('',#8951,1.);+#8951 = DIRECTION('',(1.,0.));+#8952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8953 = ORIENTED_EDGE('',*,*,#8743,.T.);+#8954 = FACE_BOUND('',#8955,.F.);+#8955 = EDGE_LOOP('',(#8956,#8988,#9018,#9048,#9078,#9108,#9138,#9168));+#8956 = ORIENTED_EDGE('',*,*,#8957,.T.);+#8957 = EDGE_CURVE('',#8958,#8960,#8962,.T.);+#8958 = VERTEX_POINT('',#8959);+#8959 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.1500001)+ );+#8960 = VERTEX_POINT('',#8961);+#8961 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.1500001)+ );+#8962 = SURFACE_CURVE('',#8963,(#8967,#8974),.PCURVE_S1.);+#8963 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8964,#8965,#8966),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8964 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.1500001)+ );+#8965 = CARTESIAN_POINT('',(0.135360427133,5.159229394814E-02,1.1500001)+ );+#8966 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.1500001)+ );+#8967 = PCURVE('',#8759,#8968);+#8968 = DEFINITIONAL_REPRESENTATION('',(#8969),#8973);+#8969 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8970,#8971,#8972),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8970 = CARTESIAN_POINT('',(4.881851470362E-02,0.107781136359));+#8971 = CARTESIAN_POINT('',(3.764414688996E-02,0.107781136359));+#8972 = CARTESIAN_POINT('',(3.21362138187E-02,9.573500935385E-02));+#8973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8974 = PCURVE('',#8975,#8982);+#8975 = SURFACE_OF_LINEAR_EXTRUSION('',#8976,#8980);+#8976 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8977,#8978,#8979),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8977 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.2500001)+ );+#8978 = CARTESIAN_POINT('',(0.135360427133,5.159229394814E-02,1.2500001)+ );+#8979 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.2500001)+ );+#8980 = VECTOR('',#8981,1.);+#8981 = DIRECTION('',(0.,0.,1.));+#8982 = DEFINITIONAL_REPRESENTATION('',(#8983),#8987);+#8983 = LINE('',#8984,#8985);+#8984 = CARTESIAN_POINT('',(0.,-0.1));+#8985 = VECTOR('',#8986,1.);+#8986 = DIRECTION('',(1.,0.));+#8987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8988 = ORIENTED_EDGE('',*,*,#8989,.T.);+#8989 = EDGE_CURVE('',#8960,#8990,#8992,.T.);+#8990 = VERTEX_POINT('',#8991);+#8991 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.1500001)+ );+#8992 = SURFACE_CURVE('',#8993,(#8997,#9004),.PCURVE_S1.);+#8993 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8994,#8995,#8996),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8994 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.1500001)+ );+#8995 = CARTESIAN_POINT('',(0.12434456099,2.750003993856E-02,1.1500001)+ );+#8996 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.1500001)+ );+#8997 = PCURVE('',#8759,#8998);+#8998 = DEFINITIONAL_REPRESENTATION('',(#8999),#9003);+#8999 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9000,#9001,#9002),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9000 = CARTESIAN_POINT('',(3.21362138187E-02,9.573500935385E-02));+#9001 = CARTESIAN_POINT('',(2.662828074743E-02,8.368888234906E-02));+#9002 = CARTESIAN_POINT('',(2.662828074743E-02,5.904187249058E-02));+#9003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9004 = PCURVE('',#9005,#9012);+#9005 = SURFACE_OF_LINEAR_EXTRUSION('',#9006,#9010);+#9006 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9007,#9008,#9009),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9007 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.2500001)+ );+#9008 = CARTESIAN_POINT('',(0.12434456099,2.750003993856E-02,1.2500001)+ );+#9009 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.2500001)+ );+#9010 = VECTOR('',#9011,1.);+#9011 = DIRECTION('',(0.,0.,1.));+#9012 = DEFINITIONAL_REPRESENTATION('',(#9013),#9017);+#9013 = LINE('',#9014,#9015);+#9014 = CARTESIAN_POINT('',(0.,-0.1));+#9015 = VECTOR('',#9016,1.);+#9016 = DIRECTION('',(1.,0.));+#9017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9018 = ORIENTED_EDGE('',*,*,#9019,.T.);+#9019 = EDGE_CURVE('',#8990,#9020,#9022,.T.);+#9020 = VERTEX_POINT('',#9021);+#9021 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,1.1500001+ ));+#9022 = SURFACE_CURVE('',#9023,(#9027,#9034),.PCURVE_S1.);+#9023 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9024,#9025,#9026),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9024 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.1500001)+ );+#9025 = CARTESIAN_POINT('',(0.12434456099,-2.171472894284E-02,1.1500001)+ );+#9026 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,1.1500001+ ));+#9027 = PCURVE('',#8759,#9028);+#9028 = DEFINITIONAL_REPRESENTATION('',(#9029),#9033);+#9029 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9030,#9031,#9032),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9030 = CARTESIAN_POINT('',(2.662828074743E-02,5.904187249058E-02));+#9031 = CARTESIAN_POINT('',(2.662828074743E-02,3.447411346765E-02));+#9032 = CARTESIAN_POINT('',(3.21362138187E-02,2.242798646286E-02));+#9033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9034 = PCURVE('',#9035,#9042);+#9035 = SURFACE_OF_LINEAR_EXTRUSION('',#9036,#9040);+#9036 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9037,#9038,#9039),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9037 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.2500001)+ );+#9038 = CARTESIAN_POINT('',(0.12434456099,-2.171472894284E-02,1.2500001)+ );+#9039 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,1.2500001+ ));+#9040 = VECTOR('',#9041,1.);+#9041 = DIRECTION('',(0.,0.,1.));+#9042 = DEFINITIONAL_REPRESENTATION('',(#9043),#9047);+#9043 = LINE('',#9044,#9045);+#9044 = CARTESIAN_POINT('',(0.,-0.1));+#9045 = VECTOR('',#9046,1.);+#9046 = DIRECTION('',(1.,0.));+#9047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9048 = ORIENTED_EDGE('',*,*,#9049,.T.);+#9049 = EDGE_CURVE('',#9020,#9050,#9052,.T.);+#9050 = VERTEX_POINT('',#9051);+#9051 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,1.1500001+ ));+#9052 = SURFACE_CURVE('',#9053,(#9057,#9064),.PCURVE_S1.);+#9053 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9054,#9055,#9056),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9054 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,1.1500001+ ));+#9055 = CARTESIAN_POINT('',(0.135360427133,-4.580698295242E-02,1.1500001+ ));+#9056 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,1.1500001+ ));+#9057 = PCURVE('',#8759,#9058);+#9058 = DEFINITIONAL_REPRESENTATION('',(#9059),#9063);+#9059 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9060,#9061,#9062),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9060 = CARTESIAN_POINT('',(3.21362138187E-02,2.242798646286E-02));+#9061 = CARTESIAN_POINT('',(3.764414688996E-02,1.038185945807E-02));+#9062 = CARTESIAN_POINT('',(4.881851470362E-02,1.038185945807E-02));+#9063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9064 = PCURVE('',#9065,#9072);+#9065 = SURFACE_OF_LINEAR_EXTRUSION('',#9066,#9070);+#9066 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9067,#9068,#9069),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9067 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,1.2500001+ ));+#9068 = CARTESIAN_POINT('',(0.135360427133,-4.580698295242E-02,1.2500001+ ));+#9069 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,1.2500001+ ));+#9070 = VECTOR('',#9071,1.);+#9071 = DIRECTION('',(0.,0.,1.));+#9072 = DEFINITIONAL_REPRESENTATION('',(#9073),#9077);+#9073 = LINE('',#9074,#9075);+#9074 = CARTESIAN_POINT('',(0.,-0.1));+#9075 = VECTOR('',#9076,1.);+#9076 = DIRECTION('',(1.,0.));+#9077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9078 = ORIENTED_EDGE('',*,*,#9079,.T.);+#9079 = EDGE_CURVE('',#9050,#9080,#9082,.T.);+#9080 = VERTEX_POINT('',#9081);+#9081 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,1.1500001+ ));+#9082 = SURFACE_CURVE('',#9083,(#9087,#9094),.PCURVE_S1.);+#9083 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9084,#9085,#9086),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9084 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,1.1500001+ ));+#9085 = CARTESIAN_POINT('',(0.157788413596,-4.580698295242E-02,1.1500001+ ));+#9086 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,1.1500001+ ));+#9087 = PCURVE('',#8759,#9088);+#9088 = DEFINITIONAL_REPRESENTATION('',(#9089),#9093);+#9089 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9090,#9091,#9092),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9090 = CARTESIAN_POINT('',(4.881851470362E-02,1.038185945807E-02));+#9091 = CARTESIAN_POINT('',(6.007213335283E-02,1.038185945807E-02));+#9092 = CARTESIAN_POINT('',(6.55800664241E-02,2.242798646286E-02));+#9093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9094 = PCURVE('',#9095,#9102);+#9095 = SURFACE_OF_LINEAR_EXTRUSION('',#9096,#9100);+#9096 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9097,#9098,#9099),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9097 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,1.2500001+ ));+#9098 = CARTESIAN_POINT('',(0.157788413596,-4.580698295242E-02,1.2500001+ ));+#9099 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,1.2500001+ ));+#9100 = VECTOR('',#9101,1.);+#9101 = DIRECTION('',(0.,0.,1.));+#9102 = DEFINITIONAL_REPRESENTATION('',(#9103),#9107);+#9103 = LINE('',#9104,#9105);+#9104 = CARTESIAN_POINT('',(0.,-0.1));+#9105 = VECTOR('',#9106,1.);+#9106 = DIRECTION('',(1.,0.));+#9107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9108 = ORIENTED_EDGE('',*,*,#9109,.T.);+#9109 = EDGE_CURVE('',#9080,#9110,#9112,.T.);+#9110 = VERTEX_POINT('',#9111);+#9111 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.1500001)+ );+#9112 = SURFACE_CURVE('',#9113,(#9117,#9124),.PCURVE_S1.);+#9113 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9114,#9115,#9116),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9114 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,1.1500001+ ));+#9115 = CARTESIAN_POINT('',(0.168804279738,-2.171472894284E-02,1.1500001+ ));+#9116 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.1500001)+ );+#9117 = PCURVE('',#8759,#9118);+#9118 = DEFINITIONAL_REPRESENTATION('',(#9119),#9123);+#9119 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9120,#9121,#9122),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9120 = CARTESIAN_POINT('',(6.55800664241E-02,2.242798646286E-02));+#9121 = CARTESIAN_POINT('',(7.108799949537E-02,3.447411346765E-02));+#9122 = CARTESIAN_POINT('',(7.108799949537E-02,5.904187249058E-02));+#9123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9124 = PCURVE('',#9125,#9132);+#9125 = SURFACE_OF_LINEAR_EXTRUSION('',#9126,#9130);+#9126 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9127,#9128,#9129),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9127 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,1.2500001+ ));+#9128 = CARTESIAN_POINT('',(0.168804279738,-2.171472894284E-02,1.2500001+ ));+#9129 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.2500001)+ );+#9130 = VECTOR('',#9131,1.);+#9131 = DIRECTION('',(0.,0.,1.));+#9132 = DEFINITIONAL_REPRESENTATION('',(#9133),#9137);+#9133 = LINE('',#9134,#9135);+#9134 = CARTESIAN_POINT('',(0.,-0.1));+#9135 = VECTOR('',#9136,1.);+#9136 = DIRECTION('',(1.,0.));+#9137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9138 = ORIENTED_EDGE('',*,*,#9139,.T.);+#9139 = EDGE_CURVE('',#9110,#9140,#9142,.T.);+#9140 = VERTEX_POINT('',#9141);+#9141 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.1500001)+ );+#9142 = SURFACE_CURVE('',#9143,(#9147,#9154),.PCURVE_S1.);+#9143 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9144,#9145,#9146),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9144 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.1500001)+ );+#9145 = CARTESIAN_POINT('',(0.168804279738,2.750003993856E-02,1.1500001)+ );+#9146 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.1500001)+ );+#9147 = PCURVE('',#8759,#9148);+#9148 = DEFINITIONAL_REPRESENTATION('',(#9149),#9153);+#9149 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9150,#9151,#9152),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9150 = CARTESIAN_POINT('',(7.108799949537E-02,5.904187249058E-02));+#9151 = CARTESIAN_POINT('',(7.108799949537E-02,8.368888234906E-02));+#9152 = CARTESIAN_POINT('',(6.55800664241E-02,9.573500935385E-02));+#9153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9154 = PCURVE('',#9155,#9162);+#9155 = SURFACE_OF_LINEAR_EXTRUSION('',#9156,#9160);+#9156 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9157,#9158,#9159),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9157 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.2500001)+ );+#9158 = CARTESIAN_POINT('',(0.168804279738,2.750003993856E-02,1.2500001)+ );+#9159 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.2500001)+ );+#9160 = VECTOR('',#9161,1.);+#9161 = DIRECTION('',(0.,0.,1.));+#9162 = DEFINITIONAL_REPRESENTATION('',(#9163),#9167);+#9163 = LINE('',#9164,#9165);+#9164 = CARTESIAN_POINT('',(0.,-0.1));+#9165 = VECTOR('',#9166,1.);+#9166 = DIRECTION('',(1.,0.));+#9167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9168 = ORIENTED_EDGE('',*,*,#9169,.T.);+#9169 = EDGE_CURVE('',#9140,#8958,#9170,.T.);+#9170 = SURFACE_CURVE('',#9171,(#9175,#9182),.PCURVE_S1.);+#9171 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9172,#9173,#9174),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9172 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.1500001)+ );+#9173 = CARTESIAN_POINT('',(0.157788413596,5.159229394814E-02,1.1500001)+ );+#9174 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.1500001)+ );+#9175 = PCURVE('',#8759,#9176);+#9176 = DEFINITIONAL_REPRESENTATION('',(#9177),#9181);+#9177 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9178,#9179,#9180),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9178 = CARTESIAN_POINT('',(6.55800664241E-02,9.573500935385E-02));+#9179 = CARTESIAN_POINT('',(6.007213335283E-02,0.107781136359));+#9180 = CARTESIAN_POINT('',(4.881851470362E-02,0.107781136359));+#9181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9182 = PCURVE('',#9183,#9190);+#9183 = SURFACE_OF_LINEAR_EXTRUSION('',#9184,#9188);+#9184 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9185,#9186,#9187),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9185 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.2500001)+ );+#9186 = CARTESIAN_POINT('',(0.157788413596,5.159229394814E-02,1.2500001)+ );+#9187 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.2500001)+ );+#9188 = VECTOR('',#9189,1.);+#9189 = DIRECTION('',(0.,0.,1.));+#9190 = DEFINITIONAL_REPRESENTATION('',(#9191),#9195);+#9191 = LINE('',#9192,#9193);+#9192 = CARTESIAN_POINT('',(0.,-0.1));+#9193 = VECTOR('',#9194,1.);+#9194 = DIRECTION('',(1.,0.));+#9195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9196 = ADVANCED_FACE('',(#9197),#9183,.T.);+#9197 = FACE_BOUND('',#9198,.T.);+#9198 = EDGE_LOOP('',(#9199,#9235,#9256,#9257));+#9199 = ORIENTED_EDGE('',*,*,#9200,.T.);+#9200 = EDGE_CURVE('',#9201,#9203,#9205,.T.);+#9201 = VERTEX_POINT('',#9202);+#9202 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.2));+#9203 = VERTEX_POINT('',#9204);+#9204 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.2));+#9205 = SURFACE_CURVE('',#9206,(#9212,#9221),.PCURVE_S1.);+#9206 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9207,#9208,#9209,#9210,#9211),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9207 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.2));+#9208 = CARTESIAN_POINT('',(0.152161544787,5.159229394814E-02,1.2));+#9209 = CARTESIAN_POINT('',(0.156831185576,4.958464848093E-02,1.2));+#9210 = CARTESIAN_POINT('',(0.160542677867,4.556857928336E-02,1.2));+#9211 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.2));+#9212 = PCURVE('',#9183,#9213);+#9213 = DEFINITIONAL_REPRESENTATION('',(#9214),#9220);+#9214 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9215,#9216,#9217,#9218,#9219),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9215 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9216 = CARTESIAN_POINT('',(0.750002642893,-5.00001E-02));+#9217 = CARTESIAN_POINT('',(0.499983736994,-5.00001E-02));+#9218 = CARTESIAN_POINT('',(0.249972972127,-5.00001E-02));+#9219 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9221 = PCURVE('',#9222,#9227);+#9222 = PLANE('',#9223);+#9223 = AXIS2_PLACEMENT_3D('',#9224,#9225,#9226);+#9224 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#9225 = DIRECTION('',(0.,0.,1.));+#9226 = DIRECTION('',(0.43658423493,-0.899663384723,0.));+#9227 = DEFINITIONAL_REPRESENTATION('',(#9228),#9234);+#9228 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9229,#9230,#9231,#9232,#9233),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9229 = CARTESIAN_POINT('',(1.527282749729,0.154356371783));+#9230 = CARTESIAN_POINT('',(1.529739300003,0.159418552589));+#9231 = CARTESIAN_POINT('',(1.533584196671,0.162743151067));+#9232 = CARTESIAN_POINT('',(1.538817686101,0.164328892286));+#9233 = CARTESIAN_POINT('',(1.545438038357,0.164176976995));+#9234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9235 = ORIENTED_EDGE('',*,*,#9236,.T.);+#9236 = EDGE_CURVE('',#9203,#9140,#9237,.T.);+#9237 = SURFACE_CURVE('',#9238,(#9242,#9249),.PCURVE_S1.);+#9238 = LINE('',#9239,#9240);+#9239 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.2500001)+ );+#9240 = VECTOR('',#9241,1.);+#9241 = DIRECTION('',(-0.,-0.,-1.));+#9242 = PCURVE('',#9183,#9243);+#9243 = DEFINITIONAL_REPRESENTATION('',(#9244),#9248);+#9244 = LINE('',#9245,#9246);+#9245 = CARTESIAN_POINT('',(0.,0.));+#9246 = VECTOR('',#9247,1.);+#9247 = DIRECTION('',(0.,-1.));+#9248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9249 = PCURVE('',#9155,#9250);+#9250 = DEFINITIONAL_REPRESENTATION('',(#9251),#9255);+#9251 = LINE('',#9252,#9253);+#9252 = CARTESIAN_POINT('',(1.,0.));+#9253 = VECTOR('',#9254,1.);+#9254 = DIRECTION('',(0.,-1.));+#9255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9256 = ORIENTED_EDGE('',*,*,#9169,.T.);+#9257 = ORIENTED_EDGE('',*,*,#9258,.F.);+#9258 = EDGE_CURVE('',#9201,#8958,#9259,.T.);+#9259 = SURFACE_CURVE('',#9260,(#9264,#9271),.PCURVE_S1.);+#9260 = LINE('',#9261,#9262);+#9261 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.2500001)+ );+#9262 = VECTOR('',#9263,1.);+#9263 = DIRECTION('',(-0.,-0.,-1.));+#9264 = PCURVE('',#9183,#9265);+#9265 = DEFINITIONAL_REPRESENTATION('',(#9266),#9270);+#9266 = LINE('',#9267,#9268);+#9267 = CARTESIAN_POINT('',(1.,0.));+#9268 = VECTOR('',#9269,1.);+#9269 = DIRECTION('',(0.,-1.));+#9270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9271 = PCURVE('',#8975,#9272);+#9272 = DEFINITIONAL_REPRESENTATION('',(#9273),#9277);+#9273 = LINE('',#9274,#9275);+#9274 = CARTESIAN_POINT('',(0.,0.));+#9275 = VECTOR('',#9276,1.);+#9276 = DIRECTION('',(0.,-1.));+#9277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9278 = ADVANCED_FACE('',(#9279,#9501),#9222,.T.);+#9279 = FACE_BOUND('',#9280,.T.);+#9280 = EDGE_LOOP('',(#9281,#9319,#9348,#9377,#9406,#9444,#9473,#9500));+#9281 = ORIENTED_EDGE('',*,*,#9282,.F.);+#9282 = EDGE_CURVE('',#9283,#9201,#9285,.T.);+#9283 = VERTEX_POINT('',#9284);+#9284 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.2));+#9285 = SURFACE_CURVE('',#9286,(#9295,#9307),.PCURVE_S1.);+#9286 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9287,#9288,#9289,#9290,#9291,+ #9292,#9293,#9294),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#9287 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.2));+#9288 = CARTESIAN_POINT('',(0.131628628904,4.34306632901E-02,1.2));+#9289 = CARTESIAN_POINT('',(0.13379775722,4.648045476209E-02,1.2));+#9290 = CARTESIAN_POINT('',(0.13635996494,4.869498279571E-02,1.2));+#9291 = CARTESIAN_POINT('',(0.14094152498,5.083324888627E-02,1.2));+#9292 = CARTESIAN_POINT('',(0.142686965761,5.133929029708E-02,1.2));+#9293 = CARTESIAN_POINT('',(0.144551404268,5.159229394814E-02,1.2));+#9294 = CARTESIAN_POINT('',(0.146534794946,5.159229394814E-02,1.2));+#9295 = PCURVE('',#9222,#9296);+#9296 = DEFINITIONAL_REPRESENTATION('',(#9297),#9306);+#9297 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9298,#9299,#9300,#9301,#9302,+ #9303,#9304,#9305),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#9298 = CARTESIAN_POINT('',(1.530836979554,0.134088767362));+#9299 = CARTESIAN_POINT('',(1.528117672894,0.137382600712));+#9300 = CARTESIAN_POINT('',(1.526320894402,0.14066557691));+#9301 = CARTESIAN_POINT('',(1.525447184113,0.143937529408));+#9302 = CARTESIAN_POINT('',(1.525523701289,0.148992924486));+#9303 = CARTESIAN_POINT('',(1.525830466289,0.150784163349));+#9304 = CARTESIAN_POINT('',(1.526416832627,0.152571987812));+#9305 = CARTESIAN_POINT('',(1.527282749729,0.154356371783));+#9306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9307 = PCURVE('',#8975,#9308);+#9308 = DEFINITIONAL_REPRESENTATION('',(#9309),#9318);+#9309 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9310,#9311,#9312,#9313,#9314,+ #9315,#9316,#9317),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.645007654914,+ 1.),.UNSPECIFIED.);+#9310 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9311 = CARTESIAN_POINT('',(0.838765756612,-5.00001E-02));+#9312 = CARTESIAN_POINT('',(0.677515731901,-5.00001E-02));+#9313 = CARTESIAN_POINT('',(0.516257837385,-5.00001E-02));+#9314 = CARTESIAN_POINT('',(0.266248653531,-5.00001E-02));+#9315 = CARTESIAN_POINT('',(0.177497324118,-5.00001E-02));+#9316 = CARTESIAN_POINT('',(8.874733279964E-02,-5.00001E-02));+#9317 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9319 = ORIENTED_EDGE('',*,*,#9320,.F.);+#9320 = EDGE_CURVE('',#9321,#9283,#9323,.T.);+#9321 = VERTEX_POINT('',#9322);+#9322 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.2));+#9323 = SURFACE_CURVE('',#9324,(#9330,#9339),.PCURVE_S1.);+#9324 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9325,#9326,#9327,#9328,#9329),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9325 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.2));+#9326 = CARTESIAN_POINT('',(0.12434456099,1.517044687707E-02,1.2));+#9327 = CARTESIAN_POINT('',(0.125261642659,2.539487807556E-02,1.2));+#9328 = CARTESIAN_POINT('',(0.127097512346,3.352088319257E-02,1.2));+#9329 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.2));+#9330 = PCURVE('',#9222,#9331);+#9331 = DEFINITIONAL_REPRESENTATION('',(#9332),#9338);+#9332 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9333,#9334,#9335,#9336,#9337),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9333 = CARTESIAN_POINT('',(1.561443774515,0.113113836567));+#9334 = CARTESIAN_POINT('',(1.550362245628,0.118491426556));+#9335 = CARTESIAN_POINT('',(1.541564082648,0.123780316826));+#9336 = CARTESIAN_POINT('',(1.535054925143,0.128979667291));+#9337 = CARTESIAN_POINT('',(1.530836979554,0.134088767362));+#9338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9339 = PCURVE('',#9005,#9340);+#9340 = DEFINITIONAL_REPRESENTATION('',(#9341),#9347);+#9341 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9342,#9343,#9344,#9345,#9346),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9342 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9343 = CARTESIAN_POINT('',(0.750123506508,-5.00001E-02));+#9344 = CARTESIAN_POINT('',(0.500143833517,-5.00001E-02));+#9345 = CARTESIAN_POINT('',(0.250092156109,-5.00001E-02));+#9346 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9348 = ORIENTED_EDGE('',*,*,#9349,.F.);+#9349 = EDGE_CURVE('',#9350,#9321,#9352,.T.);+#9350 = VERTEX_POINT('',#9351);+#9351 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,1.2));+#9352 = SURFACE_CURVE('',#9353,(#9359,#9368),.PCURVE_S1.);+#9353 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9354,#9355,#9356,#9357,#9358),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9354 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,1.2));+#9355 = CARTESIAN_POINT('',(0.127097521248,-2.773559166542E-02,1.2));+#9356 = CARTESIAN_POINT('',(0.125261651012,-1.962283008184E-02,1.2));+#9357 = CARTESIAN_POINT('',(0.12434456099,-9.424836741295E-03,1.2));+#9358 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.2));+#9359 = PCURVE('',#9222,#9360);+#9360 = DEFINITIONAL_REPRESENTATION('',(#9361),#9367);+#9361 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9362,#9363,#9364,#9365,#9366),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9362 = CARTESIAN_POINT('',(1.596788623892,0.102084076858));+#9363 = CARTESIAN_POINT('',(1.590165136536,0.102236064089));+#9364 = CARTESIAN_POINT('',(1.582064869988,0.104126302668));+#9365 = CARTESIAN_POINT('',(1.572489721736,0.107753513475));+#9366 = CARTESIAN_POINT('',(1.561443774515,0.113113836567));+#9367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9368 = PCURVE('',#9035,#9369);+#9369 = DEFINITIONAL_REPRESENTATION('',(#9370),#9376);+#9370 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9371,#9372,#9373,#9374,#9375),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9371 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9372 = CARTESIAN_POINT('',(0.749908651975,-5.00001E-02));+#9373 = CARTESIAN_POINT('',(0.49985746444,-5.00001E-02));+#9374 = CARTESIAN_POINT('',(0.249877630473,-5.00001E-02));+#9375 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9377 = ORIENTED_EDGE('',*,*,#9378,.F.);+#9378 = EDGE_CURVE('',#9379,#9350,#9381,.T.);+#9379 = VERTEX_POINT('',#9380);+#9380 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,1.2));+#9381 = SURFACE_CURVE('',#9382,(#9388,#9397),.PCURVE_S1.);+#9382 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9383,#9384,#9385,#9386,#9387),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9383 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,1.2));+#9384 = CARTESIAN_POINT('',(0.140947658496,-4.580698295242E-02,1.2));+#9385 = CARTESIAN_POINT('',(0.136304440224,-4.379932913926E-02,1.2));+#9386 = CARTESIAN_POINT('',(0.132606158799,-3.978325940325E-02,1.2));+#9387 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,1.2));+#9388 = PCURVE('',#9222,#9389);+#9389 = DEFINITIONAL_REPRESENTATION('',(#9390),#9396);+#9390 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9391,#9392,#9393,#9394,#9395),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9391 = CARTESIAN_POINT('',(1.614909312855,0.111833382995));+#9392 = CARTESIAN_POINT('',(1.612470057162,0.106806840904));+#9393 = CARTESIAN_POINT('',(1.60863668864,0.103506017442));+#9394 = CARTESIAN_POINT('',(1.603408966382,0.101932161791));+#9395 = CARTESIAN_POINT('',(1.596788623892,0.102084076858));+#9396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9397 = PCURVE('',#9065,#9398);+#9398 = DEFINITIONAL_REPRESENTATION('',(#9399),#9405);+#9399 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9400,#9401,#9402,#9403,#9404),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9400 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9401 = CARTESIAN_POINT('',(0.750002123433,-5.00001E-02));+#9402 = CARTESIAN_POINT('',(0.499983144654,-5.00001E-02));+#9403 = CARTESIAN_POINT('',(0.249972603361,-5.00001E-02));+#9404 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9406 = ORIENTED_EDGE('',*,*,#9407,.F.);+#9407 = EDGE_CURVE('',#9408,#9379,#9410,.T.);+#9408 = VERTEX_POINT('',#9409);+#9409 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,1.2));+#9410 = SURFACE_CURVE('',#9411,(#9420,#9432),.PCURVE_S1.);+#9411 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9412,#9413,#9414,#9415,#9416,+ #9417,#9418,#9419),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#9412 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,1.2));+#9413 = CARTESIAN_POINT('',(0.161547746066,-3.758513352021E-02,1.2));+#9414 = CARTESIAN_POINT('',(0.159412917867,-4.060038395938E-02,1.2));+#9415 = CARTESIAN_POINT('',(0.156891778828,-4.280607469858E-02,1.2));+#9416 = CARTESIAN_POINT('',(0.152313390684,-4.500457279865E-02,1.2));+#9417 = CARTESIAN_POINT('',(0.15051473135,-4.553952552051E-02,1.2));+#9418 = CARTESIAN_POINT('',(0.14858851593,-4.580698295242E-02,1.2));+#9419 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,1.2));+#9420 = PCURVE('',#9222,#9421);+#9421 = DEFINITIONAL_REPRESENTATION('',(#9422),#9431);+#9422 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9423,#9424,#9425,#9426,#9427,+ #9428,#9429,#9430),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#9423 = CARTESIAN_POINT('',(1.611389682695,0.132172286491));+#9424 = CARTESIAN_POINT('',(1.614066833745,0.128929515258));+#9425 = CARTESIAN_POINT('',(1.615847511824,0.125692477688));+#9426 = CARTESIAN_POINT('',(1.616731201462,0.122461331403));+#9427 = CARTESIAN_POINT('',(1.616710257619,0.117382493618));+#9428 = CARTESIAN_POINT('',(1.616406268686,0.115530753749));+#9429 = CARTESIAN_POINT('',(1.615805935059,0.113681040566));+#9430 = CARTESIAN_POINT('',(1.614909312855,0.111833382995));+#9431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9432 = PCURVE('',#9095,#9433);+#9433 = DEFINITIONAL_REPRESENTATION('',(#9434),#9443);+#9434 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9435,#9436,#9437,#9438,#9439,+ #9440,#9441,#9442),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.635007591586,+ 1.),.UNSPECIFIED.);+#9435 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9436 = CARTESIAN_POINT('',(0.841265264302,-5.00001E-02));+#9437 = CARTESIAN_POINT('',(0.682515291442,-5.00001E-02));+#9438 = CARTESIAN_POINT('',(0.523757669192,-5.00001E-02));+#9439 = CARTESIAN_POINT('',(0.273748580646,-5.00001E-02));+#9440 = CARTESIAN_POINT('',(0.182497145522,-5.00001E-02));+#9441 = CARTESIAN_POINT('',(9.124713781295E-02,-5.00001E-02));+#9442 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9444 = ORIENTED_EDGE('',*,*,#9445,.F.);+#9445 = EDGE_CURVE('',#9446,#9408,#9448,.T.);+#9446 = VERTEX_POINT('',#9447);+#9447 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.2));+#9448 = SURFACE_CURVE('',#9449,(#9455,#9464),.PCURVE_S1.);+#9449 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9450,#9451,#9452,#9453,#9454),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9450 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.2));+#9451 = CARTESIAN_POINT('',(0.168804279738,-9.424836744601E-03,1.2));+#9452 = CARTESIAN_POINT('',(0.167887189716,-1.96228300803E-02,1.2));+#9453 = CARTESIAN_POINT('',(0.16605131948,-2.773559166649E-02,1.2));+#9454 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,1.2));+#9455 = PCURVE('',#9222,#9456);+#9456 = DEFINITIONAL_REPRESENTATION('',(#9457),#9463);+#9457 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9458,#9459,#9460,#9461,#9462),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9458 = CARTESIAN_POINT('',(1.580854186809,0.15311261762));+#9459 = CARTESIAN_POINT('',(1.591900134034,0.147752294526));+#9460 = CARTESIAN_POINT('',(1.60067450819,0.142474939094));+#9461 = CARTESIAN_POINT('',(1.607171750736,0.137281370053));+#9462 = CARTESIAN_POINT('',(1.611389682695,0.132172286491));+#9463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9464 = PCURVE('',#9125,#9465);+#9465 = DEFINITIONAL_REPRESENTATION('',(#9466),#9472);+#9466 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9467,#9468,#9469,#9470,#9471),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9467 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9468 = CARTESIAN_POINT('',(0.750122369459,-5.00001E-02));+#9469 = CARTESIAN_POINT('',(0.500142535597,-5.00001E-02));+#9470 = CARTESIAN_POINT('',(0.25009134798,-5.00001E-02));+#9471 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9473 = ORIENTED_EDGE('',*,*,#9474,.F.);+#9474 = EDGE_CURVE('',#9203,#9446,#9475,.T.);+#9475 = SURFACE_CURVE('',#9476,(#9482,#9491),.PCURVE_S1.);+#9476 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9477,#9478,#9479,#9480,#9481),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9477 = CARTESIAN_POINT('',(0.163296346667,3.954616694335E-02,1.2));+#9478 = CARTESIAN_POINT('',(0.166051328382,3.352088319143E-02,1.2));+#9479 = CARTESIAN_POINT('',(0.16788719807,2.539487807703E-02,1.2));+#9480 = CARTESIAN_POINT('',(0.168804279738,1.517044687406E-02,1.2));+#9481 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.2));+#9482 = PCURVE('',#9222,#9483);+#9483 = DEFINITIONAL_REPRESENTATION('',(#9484),#9490);+#9484 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9485,#9486,#9487,#9488,#9489),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9485 = CARTESIAN_POINT('',(1.545438038357,0.164176976995));+#9486 = CARTESIAN_POINT('',(1.552061547116,0.164024989273));+#9487 = CARTESIAN_POINT('',(1.560173728144,0.162128968284));+#9488 = CARTESIAN_POINT('',(1.569772657925,0.158490207607));+#9489 = CARTESIAN_POINT('',(1.580854186809,0.15311261762));+#9490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9491 = PCURVE('',#9155,#9492);+#9492 = DEFINITIONAL_REPRESENTATION('',(#9493),#9499);+#9493 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9494,#9495,#9496,#9497,#9498),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9494 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9495 = CARTESIAN_POINT('',(0.749907843844,-5.00001E-02));+#9496 = CARTESIAN_POINT('',(0.499856166519,-5.00001E-02));+#9497 = CARTESIAN_POINT('',(0.249876493431,-5.00001E-02));+#9498 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9500 = ORIENTED_EDGE('',*,*,#9200,.F.);+#9501 = FACE_BOUND('',#9502,.T.);+#9502 = EDGE_LOOP('',(#9503,#9541,#9577,#9613,#9649,#9685,#9721,#9757));+#9503 = ORIENTED_EDGE('',*,*,#9504,.F.);+#9504 = EDGE_CURVE('',#9505,#9507,#9509,.T.);+#9505 = VERTEX_POINT('',#9506);+#9506 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.2));+#9507 = VERTEX_POINT('',#9508);+#9508 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.2));+#9509 = SURFACE_CURVE('',#9510,(#9516,#9525),.PCURVE_S1.);+#9510 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9511,#9512,#9513,#9514,#9515),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9511 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.2));+#9512 = CARTESIAN_POINT('',(0.137520018403,9.193103159402E-03,1.2));+#9513 = CARTESIAN_POINT('',(0.136502956743,7.409955443002E-03,1.2));+#9514 = CARTESIAN_POINT('',(0.135994433817,5.428675230102E-03,1.2));+#9515 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.2));+#9516 = PCURVE('',#9222,#9517);+#9517 = DEFINITIONAL_REPRESENTATION('',(#9518),#9524);+#9518 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9519,#9520,#9521,#9522,#9523),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9519 = CARTESIAN_POINT('',(1.560732104952,0.129799781513));+#9520 = CARTESIAN_POINT('',(1.561492039903,0.127735289133));+#9521 = CARTESIAN_POINT('',(1.562652239526,0.126041781816));+#9522 = CARTESIAN_POINT('',(1.564212711696,0.124719286654));+#9523 = CARTESIAN_POINT('',(1.566173429955,0.123767798914));+#9524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9525 = PCURVE('',#9526,#9533);+#9526 = SURFACE_OF_LINEAR_EXTRUSION('',#9527,#9531);+#9527 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9528,#9529,#9530),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9528 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.2500001)+ );+#9529 = CARTESIAN_POINT('',(0.135994433817,7.608080213551E-03,1.2500001)+ );+#9530 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.2500001)+ );+#9531 = VECTOR('',#9532,1.);+#9532 = DIRECTION('',(0.,0.,1.));+#9533 = DEFINITIONAL_REPRESENTATION('',(#9534),#9540);+#9534 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9535,#9536,#9537,#9538,#9539),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9535 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9536 = CARTESIAN_POINT('',(0.75000098338,-5.00001E-02));+#9537 = CARTESIAN_POINT('',(0.500000119824,-5.00001E-02));+#9538 = CARTESIAN_POINT('',(0.249999196383,-5.00001E-02));+#9539 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9541 = ORIENTED_EDGE('',*,*,#9542,.F.);+#9542 = EDGE_CURVE('',#9543,#9505,#9545,.T.);+#9543 = VERTEX_POINT('',#9544);+#9544 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.2));+#9545 = SURFACE_CURVE('',#9546,(#9552,#9561),.PCURVE_S1.);+#9546 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9547,#9548,#9549,#9550,#9551),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9547 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.2));+#9548 = CARTESIAN_POINT('',(0.144236526724,1.394814705818E-02,1.2));+#9549 = CARTESIAN_POINT('',(0.142301475351,1.341981112185E-02,1.2));+#9550 = CARTESIAN_POINT('',(0.140571162101,1.236312258595E-02,1.2));+#9551 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.2));+#9552 = PCURVE('',#9222,#9553);+#9553 = DEFINITIONAL_REPRESENTATION('',(#9554),#9560);+#9554 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9555,#9556,#9557,#9558,#9559),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9555 = CARTESIAN_POINT('',(1.561080611004,0.137778932564));+#9556 = CARTESIAN_POINT('',(1.560146422662,0.135853862946));+#9557 = CARTESIAN_POINT('',(1.559776934235,0.133882304938));+#9558 = CARTESIAN_POINT('',(1.559972170733,0.131864271906));+#9559 = CARTESIAN_POINT('',(1.560732104952,0.129799781513));+#9560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9561 = PCURVE('',#9562,#9569);+#9562 = SURFACE_OF_LINEAR_EXTRUSION('',#9563,#9567);+#9563 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9564,#9565,#9566),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9564 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.2500001)+ );+#9565 = CARTESIAN_POINT('',(0.142096748155,1.394814705818E-02,1.2500001)+ );+#9566 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.2500001)+ );+#9567 = VECTOR('',#9568,1.);+#9568 = DIRECTION('',(0.,0.,1.));+#9569 = DEFINITIONAL_REPRESENTATION('',(#9570),#9576);+#9570 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9571,#9572,#9573,#9574,#9575),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9571 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9572 = CARTESIAN_POINT('',(0.750000702078,-5.00001E-02));+#9573 = CARTESIAN_POINT('',(0.499999651937,-5.00001E-02));+#9574 = CARTESIAN_POINT('',(0.24999877587,-5.00001E-02));+#9575 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9577 = ORIENTED_EDGE('',*,*,#9578,.F.);+#9578 = EDGE_CURVE('',#9579,#9543,#9581,.T.);+#9579 = VERTEX_POINT('',#9580);+#9580 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.2));+#9581 = SURFACE_CURVE('',#9582,(#9588,#9597),.PCURVE_S1.);+#9582 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9583,#9584,#9585,#9586,#9587),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9583 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.2));+#9584 = CARTESIAN_POINT('',(0.152399363573,1.236312355158E-02,1.2));+#9585 = CARTESIAN_POINT('',(0.150603007166,1.341981183542E-02,1.2));+#9586 = CARTESIAN_POINT('',(0.148595308941,1.394814705818E-02,1.2));+#9587 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.2));+#9588 = PCURVE('',#9222,#9589);+#9589 = DEFINITIONAL_REPRESENTATION('',(#9590),#9596);+#9590 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9591,#9592,#9593,#9594,#9595),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9591 = CARTESIAN_POINT('',(1.567254141882,0.143239657143));+#9592 = CARTESIAN_POINT('',(1.565136176155,0.142505672099));+#9593 = CARTESIAN_POINT('',(1.563401251509,0.14135088946));+#9594 = CARTESIAN_POINT('',(1.562049398261,0.139775299708));+#9595 = CARTESIAN_POINT('',(1.561080611004,0.137778932564));+#9596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9597 = PCURVE('',#9598,#9605);+#9598 = SURFACE_OF_LINEAR_EXTRUSION('',#9599,#9603);+#9599 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9600,#9601,#9602),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9600 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.2500001)+ );+#9601 = CARTESIAN_POINT('',(0.150814340067,1.394814705818E-02,1.2500001)+ );+#9602 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.2500001)+ );+#9603 = VECTOR('',#9604,1.);+#9604 = DIRECTION('',(0.,0.,1.));+#9605 = DEFINITIONAL_REPRESENTATION('',(#9606),#9612);+#9606 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9607,#9608,#9609,#9610,#9611),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9607 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9608 = CARTESIAN_POINT('',(0.750001071824,-5.00001E-02));+#9609 = CARTESIAN_POINT('',(0.500000133953,-5.00001E-02));+#9610 = CARTESIAN_POINT('',(0.249999129133,-5.00001E-02));+#9611 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9613 = ORIENTED_EDGE('',*,*,#9614,.F.);+#9614 = EDGE_CURVE('',#9615,#9579,#9617,.T.);+#9615 = VERTEX_POINT('',#9616);+#9616 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.2));+#9617 = SURFACE_CURVE('',#9618,(#9624,#9633),.PCURVE_S1.);+#9618 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9619,#9620,#9621,#9622,#9623),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9619 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.2));+#9620 = CARTESIAN_POINT('',(0.157154406911,5.428676304643E-03,1.2));+#9621 = CARTESIAN_POINT('',(0.156626070883,7.409957396937E-03,1.2));+#9622 = CARTESIAN_POINT('',(0.155569382402,9.193104722252E-03,1.2));+#9623 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.2));+#9624 = PCURVE('',#9222,#9625);+#9625 = DEFINITIONAL_REPRESENTATION('',(#9626),#9632);+#9626 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9627,#9628,#9629,#9630,#9631),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9627 = CARTESIAN_POINT('',(1.575411540619,0.142804651928));+#9628 = CARTESIAN_POINT('',(1.573450821394,0.143756140137));+#9629 = CARTESIAN_POINT('',(1.57143767216,0.144145811648));+#9630 = CARTESIAN_POINT('',(1.56937210627,0.143973641724));+#9631 = CARTESIAN_POINT('',(1.567254141882,0.143239657143));+#9632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9633 = PCURVE('',#9634,#9641);+#9634 = SURFACE_OF_LINEAR_EXTRUSION('',#9635,#9639);+#9635 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9636,#9637,#9638),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9636 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.2500001)+ );+#9637 = CARTESIAN_POINT('',(0.157154406911,7.608080213551E-03,1.2500001)+ );+#9638 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.2500001)+ );+#9639 = VECTOR('',#9640,1.);+#9640 = DIRECTION('',(0.,0.,1.));+#9641 = DEFINITIONAL_REPRESENTATION('',(#9642),#9648);+#9642 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9643,#9644,#9645,#9646,#9647),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9643 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9644 = CARTESIAN_POINT('',(0.750000680356,-5.00001E-02));+#9645 = CARTESIAN_POINT('',(0.499999633622,-5.00001E-02));+#9646 = CARTESIAN_POINT('',(0.249998770116,-5.00001E-02));+#9647 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9649 = ORIENTED_EDGE('',*,*,#9650,.F.);+#9650 = EDGE_CURVE('',#9651,#9615,#9653,.T.);+#9651 = VERTEX_POINT('',#9652);+#9652 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,1.2));+#9653 = SURFACE_CURVE('',#9654,(#9660,#9669),.PCURVE_S1.);+#9654 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9655,#9656,#9657,#9658,#9659),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9655 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,1.2));+#9656 = CARTESIAN_POINT('',(0.155589197388,-2.734159277953E-03,1.2));+#9657 = CARTESIAN_POINT('',(0.156632676642,-9.642193746802E-04,1.2));+#9658 = CARTESIAN_POINT('',(0.157154406911,1.030270215671E-03,1.2));+#9659 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.2));+#9660 = PCURVE('',#9222,#9661);+#9661 = DEFINITIONAL_REPRESENTATION('',(#9662),#9668);+#9662 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9663,#9664,#9665,#9666,#9667),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9663 = CARTESIAN_POINT('',(1.580818265957,0.136701370253));+#9664 = CARTESIAN_POINT('',(1.580111279881,0.138784213112));+#9665 = CARTESIAN_POINT('',(1.578974496349,0.140495721048));+#9666 = CARTESIAN_POINT('',(1.577407906303,0.14183586538));+#9667 = CARTESIAN_POINT('',(1.575411540619,0.142804651928));+#9668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9669 = PCURVE('',#9670,#9677);+#9670 = SURFACE_OF_LINEAR_EXTRUSION('',#9671,#9675);+#9671 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9672,#9673,#9674),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9672 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.2500001)+ );+#9673 = CARTESIAN_POINT('',(0.157154406911,-1.188762533367E-03,1.2500001+ ));+#9674 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,1.2500001+ ));+#9675 = VECTOR('',#9676,1.);+#9676 = DIRECTION('',(0.,0.,1.));+#9677 = DEFINITIONAL_REPRESENTATION('',(#9678),#9684);+#9678 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9679,#9680,#9681,#9682,#9683),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9679 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9680 = CARTESIAN_POINT('',(0.750000881849,-5.00001E-02));+#9681 = CARTESIAN_POINT('',(0.499999885355,-5.00001E-02));+#9682 = CARTESIAN_POINT('',(0.249998946223,-5.00001E-02));+#9683 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9685 = ORIENTED_EDGE('',*,*,#9686,.F.);+#9686 = EDGE_CURVE('',#9687,#9651,#9689,.T.);+#9687 = VERTEX_POINT('',#9688);+#9688 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,1.2));+#9689 = SURFACE_CURVE('',#9690,(#9696,#9705),.PCURVE_S1.);+#9690 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9691,#9692,#9693,#9694,#9695),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9691 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,1.2));+#9692 = CARTESIAN_POINT('',(0.148634931069,-7.370327706877E-03,1.2));+#9693 = CARTESIAN_POINT('',(0.150662441715,-6.855202302035E-03,1.2));+#9694 = CARTESIAN_POINT('',(0.152458799243,-5.824932130093E-03,1.2));+#9695 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,1.2));+#9696 = PCURVE('',#9222,#9697);+#9697 = DEFINITIONAL_REPRESENTATION('',(#9698),#9704);+#9698 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9699,#9700,#9701,#9702,#9703),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9699 = CARTESIAN_POINT('',(1.580260062168,0.128471622568));+#9700 = CARTESIAN_POINT('',(1.581246147822,0.130503636291));+#9701 = CARTESIAN_POINT('',(1.58166788754,0.132552609012));+#9702 = CARTESIAN_POINT('',(1.581525252567,0.13461852582));+#9703 = CARTESIAN_POINT('',(1.580818265957,0.136701370253));+#9704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9705 = PCURVE('',#9706,#9713);+#9706 = SURFACE_OF_LINEAR_EXTRUSION('',#9707,#9711);+#9707 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9708,#9709,#9710),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9708 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,1.2500001+ ));+#9709 = CARTESIAN_POINT('',(0.150893590902,-7.370327706877E-03,1.2500001+ ));+#9710 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,1.2500001+ ));+#9711 = VECTOR('',#9712,1.);+#9712 = DIRECTION('',(0.,0.,1.));+#9713 = DEFINITIONAL_REPRESENTATION('',(#9714),#9720);+#9714 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9715,#9716,#9717,#9718,#9719),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9715 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9716 = CARTESIAN_POINT('',(0.750001219669,-5.00001E-02));+#9717 = CARTESIAN_POINT('',(0.50000035115,-5.00001E-02));+#9718 = CARTESIAN_POINT('',(0.249999307068,-5.00001E-02));+#9719 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9721 = ORIENTED_EDGE('',*,*,#9722,.F.);+#9722 = EDGE_CURVE('',#9723,#9687,#9725,.T.);+#9723 = VERTEX_POINT('',#9724);+#9724 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.2));+#9725 = SURFACE_CURVE('',#9726,(#9732,#9741),.PCURVE_S1.);+#9726 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9727,#9728,#9729,#9730,#9731),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9727 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.2));+#9728 = CARTESIAN_POINT('',(0.140452290428,-5.864558902912E-03,1.2));+#9729 = CARTESIAN_POINT('',(0.142182605832,-6.868411303657E-03,1.2));+#9730 = CARTESIAN_POINT('',(0.14415728216,-7.370327706877E-03,1.2));+#9731 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,1.2));+#9732 = PCURVE('',#9222,#9733);+#9733 = DEFINITIONAL_REPRESENTATION('',(#9734),#9740);+#9734 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9735,#9736,#9737,#9738,#9739),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9735 = CARTESIAN_POINT('',(1.574315628604,0.123119946345));+#9736 = CARTESIAN_POINT('',(1.576319050859,0.123799409037));+#9737 = CARTESIAN_POINT('',(1.577977608534,0.124917844318));+#9738 = CARTESIAN_POINT('',(1.579291276898,0.126475259517));+#9739 = CARTESIAN_POINT('',(1.580260062168,0.128471622568));+#9740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9741 = PCURVE('',#9742,#9749);+#9742 = SURFACE_OF_LINEAR_EXTRUSION('',#9743,#9747);+#9743 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9744,#9745,#9746),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9744 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,1.2500001+ ));+#9745 = CARTESIAN_POINT('',(0.141938246484,-7.370327706877E-03,1.2500001+ ));+#9746 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.2500001)+ );+#9747 = VECTOR('',#9748,1.);+#9748 = DIRECTION('',(0.,0.,1.));+#9749 = DEFINITIONAL_REPRESENTATION('',(#9750),#9756);+#9750 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9751,#9752,#9753,#9754,#9755),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9751 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9752 = CARTESIAN_POINT('',(0.750000486192,-5.00001E-02));+#9753 = CARTESIAN_POINT('',(0.499999401774,-5.00001E-02));+#9754 = CARTESIAN_POINT('',(0.24999861651,-5.00001E-02));+#9755 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9757 = ORIENTED_EDGE('',*,*,#9758,.F.);+#9758 = EDGE_CURVE('',#9507,#9723,#9759,.T.);+#9759 = SURFACE_CURVE('',#9760,(#9766,#9775),.PCURVE_S1.);+#9760 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9761,#9762,#9763,#9764,#9765),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9761 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.2));+#9762 = CARTESIAN_POINT('',(0.135994433817,9.510261322045E-04,1.2));+#9763 = CARTESIAN_POINT('',(0.136489744597,-1.083088567984E-03,1.2));+#9764 = CARTESIAN_POINT('',(0.137480387808,-2.85303091554E-03,1.2));+#9765 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.2));+#9766 = PCURVE('',#9222,#9767);+#9767 = DEFINITIONAL_REPRESENTATION('',(#9768),#9774);+#9768 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9769,#9770,#9771,#9772,#9773),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9769 = CARTESIAN_POINT('',(1.566173429955,0.123767798914));+#9770 = CARTESIAN_POINT('',(1.568241088639,0.122764415648));+#9771 = CARTESIAN_POINT('',(1.570287352033,0.122321966211));+#9772 = CARTESIAN_POINT('',(1.572312203565,0.12244048271));+#9773 = CARTESIAN_POINT('',(1.574315628604,0.123119946345));+#9774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9775 = PCURVE('',#9776,#9783);+#9776 = SURFACE_OF_LINEAR_EXTRUSION('',#9777,#9781);+#9777 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9778,#9779,#9780),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9778 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.2500001)+ );+#9779 = CARTESIAN_POINT('',(0.135994433817,-1.347264204483E-03,1.2500001+ ));+#9780 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.2500001)+ );+#9781 = VECTOR('',#9782,1.);+#9782 = DIRECTION('',(0.,0.,1.));+#9783 = DEFINITIONAL_REPRESENTATION('',(#9784),#9790);+#9784 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9785,#9786,#9787,#9788,#9789),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9785 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9786 = CARTESIAN_POINT('',(0.750001751914,-5.00001E-02));+#9787 = CARTESIAN_POINT('',(0.50000107549,-5.00001E-02));+#9788 = CARTESIAN_POINT('',(0.24999986129,-5.00001E-02));+#9789 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9791 = ADVANCED_FACE('',(#9792),#9562,.T.);+#9792 = FACE_BOUND('',#9793,.T.);+#9793 = EDGE_LOOP('',(#9794,#9795,#9818,#9846));+#9794 = ORIENTED_EDGE('',*,*,#9542,.T.);+#9795 = ORIENTED_EDGE('',*,*,#9796,.T.);+#9796 = EDGE_CURVE('',#9505,#9797,#9799,.T.);+#9797 = VERTEX_POINT('',#9798);+#9798 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.1500001)+ );+#9799 = SURFACE_CURVE('',#9800,(#9804,#9811),.PCURVE_S1.);+#9800 = LINE('',#9801,#9802);+#9801 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.2500001)+ );+#9802 = VECTOR('',#9803,1.);+#9803 = DIRECTION('',(-0.,-0.,-1.));+#9804 = PCURVE('',#9562,#9805);+#9805 = DEFINITIONAL_REPRESENTATION('',(#9806),#9810);+#9806 = LINE('',#9807,#9808);+#9807 = CARTESIAN_POINT('',(0.,0.));+#9808 = VECTOR('',#9809,1.);+#9809 = DIRECTION('',(0.,-1.));+#9810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9811 = PCURVE('',#9526,#9812);+#9812 = DEFINITIONAL_REPRESENTATION('',(#9813),#9817);+#9813 = LINE('',#9814,#9815);+#9814 = CARTESIAN_POINT('',(1.,0.));+#9815 = VECTOR('',#9816,1.);+#9816 = DIRECTION('',(0.,-1.));+#9817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9818 = ORIENTED_EDGE('',*,*,#9819,.T.);+#9819 = EDGE_CURVE('',#9797,#9820,#9822,.T.);+#9820 = VERTEX_POINT('',#9821);+#9821 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.1500001)+ );+#9822 = SURFACE_CURVE('',#9823,(#9827,#9834),.PCURVE_S1.);+#9823 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9824,#9825,#9826),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9824 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.1500001)+ );+#9825 = CARTESIAN_POINT('',(0.142096748155,1.394814705818E-02,1.1500001)+ );+#9826 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.1500001)+ );+#9827 = PCURVE('',#9562,#9828);+#9828 = DEFINITIONAL_REPRESENTATION('',(#9829),#9833);+#9829 = LINE('',#9830,#9831);+#9830 = CARTESIAN_POINT('',(0.,-0.1));+#9831 = VECTOR('',#9832,1.);+#9832 = DIRECTION('',(1.,0.));+#9833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9834 = PCURVE('',#9835,#9840);+#9835 = PLANE('',#9836);+#9836 = AXIS2_PLACEMENT_3D('',#9837,#9838,#9839);+#9837 = CARTESIAN_POINT('',(9.771628024279E-02,-5.618884241049E-02,+ 1.1500001));+#9838 = DIRECTION('',(0.,0.,1.));+#9839 = DIRECTION('',(1.,0.,0.));+#9840 = DEFINITIONAL_REPRESENTATION('',(#9841),#9845);+#9841 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9842,#9843,#9844),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9842 = CARTESIAN_POINT('',(4.13293107434E-02,6.696695604636E-02));+#9843 = CARTESIAN_POINT('',(4.438046791238E-02,7.013698946867E-02));+#9844 = CARTESIAN_POINT('',(4.86600130325E-02,7.013698946867E-02));+#9845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9846 = ORIENTED_EDGE('',*,*,#9847,.F.);+#9847 = EDGE_CURVE('',#9543,#9820,#9848,.T.);+#9848 = SURFACE_CURVE('',#9849,(#9853,#9860),.PCURVE_S1.);+#9849 = LINE('',#9850,#9851);+#9850 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.2500001)+ );+#9851 = VECTOR('',#9852,1.);+#9852 = DIRECTION('',(-0.,-0.,-1.));+#9853 = PCURVE('',#9562,#9854);+#9854 = DEFINITIONAL_REPRESENTATION('',(#9855),#9859);+#9855 = LINE('',#9856,#9857);+#9856 = CARTESIAN_POINT('',(1.,0.));+#9857 = VECTOR('',#9858,1.);+#9858 = DIRECTION('',(0.,-1.));+#9859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9860 = PCURVE('',#9598,#9861);+#9861 = DEFINITIONAL_REPRESENTATION('',(#9862),#9866);+#9862 = LINE('',#9863,#9864);+#9863 = CARTESIAN_POINT('',(0.,0.));+#9864 = VECTOR('',#9865,1.);+#9865 = DIRECTION('',(0.,-1.));+#9866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9867 = ADVANCED_FACE('',(#9868),#9835,.T.);+#9868 = FACE_BOUND('',#9869,.F.);+#9869 = EDGE_LOOP('',(#9870,#9893,#9894,#9917,#9940,#9963,#9986,#10009)+ );+#9870 = ORIENTED_EDGE('',*,*,#9871,.T.);+#9871 = EDGE_CURVE('',#9872,#9797,#9874,.T.);+#9872 = VERTEX_POINT('',#9873);+#9873 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.1500001)+ );+#9874 = SURFACE_CURVE('',#9875,(#9879,#9886),.PCURVE_S1.);+#9875 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9876,#9877,#9878),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9876 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.1500001)+ );+#9877 = CARTESIAN_POINT('',(0.135994433817,7.608080213551E-03,1.1500001)+ );+#9878 = CARTESIAN_POINT('',(0.139045590986,1.077811363586E-02,1.1500001)+ );+#9879 = PCURVE('',#9835,#9880);+#9880 = DEFINITIONAL_REPRESENTATION('',(#9881),#9885);+#9881 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9882,#9883,#9884),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9882 = CARTESIAN_POINT('',(3.827815357443E-02,5.943812666837E-02));+#9883 = CARTESIAN_POINT('',(3.827815357443E-02,6.379692262405E-02));+#9884 = CARTESIAN_POINT('',(4.13293107434E-02,6.696695604636E-02));+#9885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9886 = PCURVE('',#9526,#9887);+#9887 = DEFINITIONAL_REPRESENTATION('',(#9888),#9892);+#9888 = LINE('',#9889,#9890);+#9889 = CARTESIAN_POINT('',(0.,-0.1));+#9890 = VECTOR('',#9891,1.);+#9891 = DIRECTION('',(1.,0.));+#9892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9893 = ORIENTED_EDGE('',*,*,#9819,.T.);+#9894 = ORIENTED_EDGE('',*,*,#9895,.T.);+#9895 = EDGE_CURVE('',#9820,#9896,#9898,.T.);+#9896 = VERTEX_POINT('',#9897);+#9897 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.1500001)+ );+#9898 = SURFACE_CURVE('',#9899,(#9903,#9910),.PCURVE_S1.);+#9899 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9900,#9901,#9902),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9900 = CARTESIAN_POINT('',(0.146376293275,1.394814705818E-02,1.1500001)+ );+#9901 = CARTESIAN_POINT('',(0.150814340067,1.394814705818E-02,1.1500001)+ );+#9902 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.1500001)+ );+#9903 = PCURVE('',#9835,#9904);+#9904 = DEFINITIONAL_REPRESENTATION('',(#9905),#9909);+#9905 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9906,#9907,#9908),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9906 = CARTESIAN_POINT('',(4.86600130325E-02,7.013698946867E-02));+#9907 = CARTESIAN_POINT('',(5.309805982374E-02,7.013698946867E-02));+#9908 = CARTESIAN_POINT('',(5.626809324605E-02,6.696695604636E-02));+#9909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9910 = PCURVE('',#9598,#9911);+#9911 = DEFINITIONAL_REPRESENTATION('',(#9912),#9916);+#9912 = LINE('',#9913,#9914);+#9913 = CARTESIAN_POINT('',(0.,-0.1));+#9914 = VECTOR('',#9915,1.);+#9915 = DIRECTION('',(1.,0.));+#9916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9917 = ORIENTED_EDGE('',*,*,#9918,.T.);+#9918 = EDGE_CURVE('',#9896,#9919,#9921,.T.);+#9919 = VERTEX_POINT('',#9920);+#9920 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.1500001)+ );+#9921 = SURFACE_CURVE('',#9922,(#9926,#9933),.PCURVE_S1.);+#9922 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9923,#9924,#9925),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9923 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.1500001)+ );+#9924 = CARTESIAN_POINT('',(0.157154406911,7.608080213551E-03,1.1500001)+ );+#9925 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.1500001)+ );+#9926 = PCURVE('',#9835,#9927);+#9927 = DEFINITIONAL_REPRESENTATION('',(#9928),#9932);+#9928 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9929,#9930,#9931),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9929 = CARTESIAN_POINT('',(5.626809324605E-02,6.696695604636E-02));+#9930 = CARTESIAN_POINT('',(5.943812666837E-02,6.379692262405E-02));+#9931 = CARTESIAN_POINT('',(5.943812666837E-02,5.943812666837E-02));+#9932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9933 = PCURVE('',#9634,#9934);+#9934 = DEFINITIONAL_REPRESENTATION('',(#9935),#9939);+#9935 = LINE('',#9936,#9937);+#9936 = CARTESIAN_POINT('',(0.,-0.1));+#9937 = VECTOR('',#9938,1.);+#9938 = DIRECTION('',(1.,0.));+#9939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9940 = ORIENTED_EDGE('',*,*,#9941,.T.);+#9941 = EDGE_CURVE('',#9919,#9942,#9944,.T.);+#9942 = VERTEX_POINT('',#9943);+#9943 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,1.1500001+ ));+#9944 = SURFACE_CURVE('',#9945,(#9949,#9956),.PCURVE_S1.);+#9945 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9946,#9947,#9948),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9946 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.1500001)+ );+#9947 = CARTESIAN_POINT('',(0.157154406911,-1.188762533367E-03,1.1500001+ ));+#9948 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,1.1500001+ ));+#9949 = PCURVE('',#9835,#9950);+#9950 = DEFINITIONAL_REPRESENTATION('',(#9951),#9955);+#9951 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9952,#9953,#9954),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9952 = CARTESIAN_POINT('',(5.943812666837E-02,5.943812666837E-02));+#9953 = CARTESIAN_POINT('',(5.943812666837E-02,5.500007987713E-02));+#9954 = CARTESIAN_POINT('',(5.630771866383E-02,5.190929729037E-02));+#9955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9956 = PCURVE('',#9670,#9957);+#9957 = DEFINITIONAL_REPRESENTATION('',(#9958),#9962);+#9958 = LINE('',#9959,#9960);+#9959 = CARTESIAN_POINT('',(0.,-0.1));+#9960 = VECTOR('',#9961,1.);+#9961 = DIRECTION('',(1.,0.));+#9962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9963 = ORIENTED_EDGE('',*,*,#9964,.T.);+#9964 = EDGE_CURVE('',#9942,#9965,#9967,.T.);+#9965 = VERTEX_POINT('',#9966);+#9966 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,1.1500001+ ));+#9967 = SURFACE_CURVE('',#9968,(#9972,#9979),.PCURVE_S1.);+#9968 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9969,#9970,#9971),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9969 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,1.1500001+ ));+#9970 = CARTESIAN_POINT('',(0.150893590902,-7.370327706877E-03,1.1500001+ ));+#9971 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,1.1500001+ ));+#9972 = PCURVE('',#9835,#9973);+#9973 = DEFINITIONAL_REPRESENTATION('',(#9974),#9978);+#9974 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9975,#9976,#9977),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9975 = CARTESIAN_POINT('',(5.630771866383E-02,5.190929729037E-02));+#9976 = CARTESIAN_POINT('',(5.31773106593E-02,4.881851470362E-02));+#9977 = CARTESIAN_POINT('',(4.86600130325E-02,4.881851470362E-02));+#9978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9979 = PCURVE('',#9706,#9980);+#9980 = DEFINITIONAL_REPRESENTATION('',(#9981),#9985);+#9981 = LINE('',#9982,#9983);+#9982 = CARTESIAN_POINT('',(0.,-0.1));+#9983 = VECTOR('',#9984,1.);+#9984 = DIRECTION('',(1.,0.));+#9985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9986 = ORIENTED_EDGE('',*,*,#9987,.T.);+#9987 = EDGE_CURVE('',#9965,#9988,#9990,.T.);+#9988 = VERTEX_POINT('',#9989);+#9989 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.1500001)+ );+#9990 = SURFACE_CURVE('',#9991,(#9995,#10002),.PCURVE_S1.);+#9991 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9992,#9993,#9994),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9992 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,1.1500001+ ));+#9993 = CARTESIAN_POINT('',(0.141938246484,-7.370327706877E-03,1.1500001+ ));+#9994 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.1500001)+ );+#9995 = PCURVE('',#9835,#9996);+#9996 = DEFINITIONAL_REPRESENTATION('',(#9997),#10001);+#9997 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9998,#9999,#10000),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9998 = CARTESIAN_POINT('',(4.86600130325E-02,4.881851470362E-02));+#9999 = CARTESIAN_POINT('',(4.422196624126E-02,4.881851470362E-02));+#10000 = CARTESIAN_POINT('',(4.125005990785E-02,5.183004645481E-02));+#10001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10002 = PCURVE('',#9742,#10003);+#10003 = DEFINITIONAL_REPRESENTATION('',(#10004),#10008);+#10004 = LINE('',#10005,#10006);+#10005 = CARTESIAN_POINT('',(0.,-0.1));+#10006 = VECTOR('',#10007,1.);+#10007 = DIRECTION('',(1.,0.));+#10008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10009 = ORIENTED_EDGE('',*,*,#10010,.T.);+#10010 = EDGE_CURVE('',#9988,#9872,#10011,.T.);+#10011 = SURFACE_CURVE('',#10012,(#10016,#10023),.PCURVE_S1.);+#10012 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10013,#10014,#10015),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10013 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.1500001+ ));+#10014 = CARTESIAN_POINT('',(0.135994433817,-1.347264204483E-03,+ 1.1500001));+#10015 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.1500001+ ));+#10016 = PCURVE('',#9835,#10017);+#10017 = DEFINITIONAL_REPRESENTATION('',(#10018),#10022);+#10018 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10019,#10020,#10021),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10019 = CARTESIAN_POINT('',(4.125005990785E-02,5.183004645481E-02));+#10020 = CARTESIAN_POINT('',(3.827815357443E-02,5.484157820601E-02));+#10021 = CARTESIAN_POINT('',(3.827815357443E-02,5.943812666837E-02));+#10022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10023 = PCURVE('',#9776,#10024);+#10024 = DEFINITIONAL_REPRESENTATION('',(#10025),#10029);+#10025 = LINE('',#10026,#10027);+#10026 = CARTESIAN_POINT('',(0.,-0.1));+#10027 = VECTOR('',#10028,1.);+#10028 = DIRECTION('',(1.,0.));+#10029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10030 = ADVANCED_FACE('',(#10031),#9598,.T.);+#10031 = FACE_BOUND('',#10032,.T.);+#10032 = EDGE_LOOP('',(#10033,#10034,#10035,#10036));+#10033 = ORIENTED_EDGE('',*,*,#9578,.T.);+#10034 = ORIENTED_EDGE('',*,*,#9847,.T.);+#10035 = ORIENTED_EDGE('',*,*,#9895,.T.);+#10036 = ORIENTED_EDGE('',*,*,#10037,.F.);+#10037 = EDGE_CURVE('',#9579,#9896,#10038,.T.);+#10038 = SURFACE_CURVE('',#10039,(#10043,#10050),.PCURVE_S1.);+#10039 = LINE('',#10040,#10041);+#10040 = CARTESIAN_POINT('',(0.153984373489,1.077811363586E-02,1.2500001+ ));+#10041 = VECTOR('',#10042,1.);+#10042 = DIRECTION('',(-0.,-0.,-1.));+#10043 = PCURVE('',#9598,#10044);+#10044 = DEFINITIONAL_REPRESENTATION('',(#10045),#10049);+#10045 = LINE('',#10046,#10047);+#10046 = CARTESIAN_POINT('',(1.,0.));+#10047 = VECTOR('',#10048,1.);+#10048 = DIRECTION('',(0.,-1.));+#10049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10050 = PCURVE('',#9634,#10051);+#10051 = DEFINITIONAL_REPRESENTATION('',(#10052),#10056);+#10052 = LINE('',#10053,#10054);+#10053 = CARTESIAN_POINT('',(0.,0.));+#10054 = VECTOR('',#10055,1.);+#10055 = DIRECTION('',(0.,-1.));+#10056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10057 = ADVANCED_FACE('',(#10058),#9634,.T.);+#10058 = FACE_BOUND('',#10059,.T.);+#10059 = EDGE_LOOP('',(#10060,#10061,#10062,#10063));+#10060 = ORIENTED_EDGE('',*,*,#9614,.T.);+#10061 = ORIENTED_EDGE('',*,*,#10037,.T.);+#10062 = ORIENTED_EDGE('',*,*,#9918,.T.);+#10063 = ORIENTED_EDGE('',*,*,#10064,.F.);+#10064 = EDGE_CURVE('',#9615,#9919,#10065,.T.);+#10065 = SURFACE_CURVE('',#10066,(#10070,#10077),.PCURVE_S1.);+#10066 = LINE('',#10067,#10068);+#10067 = CARTESIAN_POINT('',(0.157154406911,3.249284257871E-03,1.2500001+ ));+#10068 = VECTOR('',#10069,1.);+#10069 = DIRECTION('',(-0.,-0.,-1.));+#10070 = PCURVE('',#9634,#10071);+#10071 = DEFINITIONAL_REPRESENTATION('',(#10072),#10076);+#10072 = LINE('',#10073,#10074);+#10073 = CARTESIAN_POINT('',(1.,0.));+#10074 = VECTOR('',#10075,1.);+#10075 = DIRECTION('',(0.,-1.));+#10076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10077 = PCURVE('',#9670,#10078);+#10078 = DEFINITIONAL_REPRESENTATION('',(#10079),#10083);+#10079 = LINE('',#10080,#10081);+#10080 = CARTESIAN_POINT('',(0.,0.));+#10081 = VECTOR('',#10082,1.);+#10082 = DIRECTION('',(0.,-1.));+#10083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10084 = ADVANCED_FACE('',(#10085),#9670,.T.);+#10085 = FACE_BOUND('',#10086,.T.);+#10086 = EDGE_LOOP('',(#10087,#10088,#10089,#10090));+#10087 = ORIENTED_EDGE('',*,*,#9650,.T.);+#10088 = ORIENTED_EDGE('',*,*,#10064,.T.);+#10089 = ORIENTED_EDGE('',*,*,#9941,.T.);+#10090 = ORIENTED_EDGE('',*,*,#10091,.F.);+#10091 = EDGE_CURVE('',#9651,#9942,#10092,.T.);+#10092 = SURFACE_CURVE('',#10093,(#10097,#10104),.PCURVE_S1.);+#10093 = LINE('',#10094,#10095);+#10094 = CARTESIAN_POINT('',(0.154023998907,-4.279545120122E-03,+ 1.2500001));+#10095 = VECTOR('',#10096,1.);+#10096 = DIRECTION('',(-0.,-0.,-1.));+#10097 = PCURVE('',#9670,#10098);+#10098 = DEFINITIONAL_REPRESENTATION('',(#10099),#10103);+#10099 = LINE('',#10100,#10101);+#10100 = CARTESIAN_POINT('',(1.,0.));+#10101 = VECTOR('',#10102,1.);+#10102 = DIRECTION('',(0.,-1.));+#10103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10104 = PCURVE('',#9706,#10105);+#10105 = DEFINITIONAL_REPRESENTATION('',(#10106),#10110);+#10106 = LINE('',#10107,#10108);+#10107 = CARTESIAN_POINT('',(0.,0.));+#10108 = VECTOR('',#10109,1.);+#10109 = DIRECTION('',(0.,-1.));+#10110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10111 = ADVANCED_FACE('',(#10112),#9706,.T.);+#10112 = FACE_BOUND('',#10113,.T.);+#10113 = EDGE_LOOP('',(#10114,#10115,#10116,#10117));+#10114 = ORIENTED_EDGE('',*,*,#9686,.T.);+#10115 = ORIENTED_EDGE('',*,*,#10091,.T.);+#10116 = ORIENTED_EDGE('',*,*,#9964,.T.);+#10117 = ORIENTED_EDGE('',*,*,#10118,.F.);+#10118 = EDGE_CURVE('',#9687,#9965,#10119,.T.);+#10119 = SURFACE_CURVE('',#10120,(#10124,#10131),.PCURVE_S1.);+#10120 = LINE('',#10121,#10122);+#10121 = CARTESIAN_POINT('',(0.146376293275,-7.370327706877E-03,+ 1.2500001));+#10122 = VECTOR('',#10123,1.);+#10123 = DIRECTION('',(-0.,-0.,-1.));+#10124 = PCURVE('',#9706,#10125);+#10125 = DEFINITIONAL_REPRESENTATION('',(#10126),#10130);+#10126 = LINE('',#10127,#10128);+#10127 = CARTESIAN_POINT('',(1.,0.));+#10128 = VECTOR('',#10129,1.);+#10129 = DIRECTION('',(0.,-1.));+#10130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10131 = PCURVE('',#9742,#10132);+#10132 = DEFINITIONAL_REPRESENTATION('',(#10133),#10137);+#10133 = LINE('',#10134,#10135);+#10134 = CARTESIAN_POINT('',(0.,0.));+#10135 = VECTOR('',#10136,1.);+#10136 = DIRECTION('',(0.,-1.));+#10137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10138 = ADVANCED_FACE('',(#10139),#9742,.T.);+#10139 = FACE_BOUND('',#10140,.T.);+#10140 = EDGE_LOOP('',(#10141,#10142,#10143,#10144));+#10141 = ORIENTED_EDGE('',*,*,#9722,.T.);+#10142 = ORIENTED_EDGE('',*,*,#10118,.T.);+#10143 = ORIENTED_EDGE('',*,*,#9987,.T.);+#10144 = ORIENTED_EDGE('',*,*,#10145,.F.);+#10145 = EDGE_CURVE('',#9723,#9988,#10146,.T.);+#10146 = SURFACE_CURVE('',#10147,(#10151,#10158),.PCURVE_S1.);+#10147 = LINE('',#10148,#10149);+#10148 = CARTESIAN_POINT('',(0.138966340151,-4.35879595568E-03,1.2500001+ ));+#10149 = VECTOR('',#10150,1.);+#10150 = DIRECTION('',(-0.,-0.,-1.));+#10151 = PCURVE('',#9742,#10152);+#10152 = DEFINITIONAL_REPRESENTATION('',(#10153),#10157);+#10153 = LINE('',#10154,#10155);+#10154 = CARTESIAN_POINT('',(1.,0.));+#10155 = VECTOR('',#10156,1.);+#10156 = DIRECTION('',(0.,-1.));+#10157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10158 = PCURVE('',#9776,#10159);+#10159 = DEFINITIONAL_REPRESENTATION('',(#10160),#10164);+#10160 = LINE('',#10161,#10162);+#10161 = CARTESIAN_POINT('',(0.,0.));+#10162 = VECTOR('',#10163,1.);+#10163 = DIRECTION('',(0.,-1.));+#10164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10165 = ADVANCED_FACE('',(#10166),#9776,.T.);+#10166 = FACE_BOUND('',#10167,.T.);+#10167 = EDGE_LOOP('',(#10168,#10169,#10170,#10171));+#10168 = ORIENTED_EDGE('',*,*,#9758,.T.);+#10169 = ORIENTED_EDGE('',*,*,#10145,.T.);+#10170 = ORIENTED_EDGE('',*,*,#10010,.T.);+#10171 = ORIENTED_EDGE('',*,*,#10172,.F.);+#10172 = EDGE_CURVE('',#9507,#9872,#10173,.T.);+#10173 = SURFACE_CURVE('',#10174,(#10178,#10185),.PCURVE_S1.);+#10174 = LINE('',#10175,#10176);+#10175 = CARTESIAN_POINT('',(0.135994433817,3.249284257871E-03,1.2500001+ ));+#10176 = VECTOR('',#10177,1.);+#10177 = DIRECTION('',(-0.,-0.,-1.));+#10178 = PCURVE('',#9776,#10179);+#10179 = DEFINITIONAL_REPRESENTATION('',(#10180),#10184);+#10180 = LINE('',#10181,#10182);+#10181 = CARTESIAN_POINT('',(1.,0.));+#10182 = VECTOR('',#10183,1.);+#10183 = DIRECTION('',(0.,-1.));+#10184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10185 = PCURVE('',#9526,#10186);+#10186 = DEFINITIONAL_REPRESENTATION('',(#10187),#10191);+#10187 = LINE('',#10188,#10189);+#10188 = CARTESIAN_POINT('',(0.,0.));+#10189 = VECTOR('',#10190,1.);+#10190 = DIRECTION('',(0.,-1.));+#10191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10192 = ADVANCED_FACE('',(#10193),#9526,.T.);+#10193 = FACE_BOUND('',#10194,.T.);+#10194 = EDGE_LOOP('',(#10195,#10196,#10197,#10198));+#10195 = ORIENTED_EDGE('',*,*,#9504,.T.);+#10196 = ORIENTED_EDGE('',*,*,#10172,.T.);+#10197 = ORIENTED_EDGE('',*,*,#9871,.T.);+#10198 = ORIENTED_EDGE('',*,*,#9796,.F.);+#10199 = ADVANCED_FACE('',(#10200),#9155,.T.);+#10200 = FACE_BOUND('',#10201,.T.);+#10201 = EDGE_LOOP('',(#10202,#10203,#10224,#10225));+#10202 = ORIENTED_EDGE('',*,*,#9474,.T.);+#10203 = ORIENTED_EDGE('',*,*,#10204,.T.);+#10204 = EDGE_CURVE('',#9446,#9110,#10205,.T.);+#10205 = SURFACE_CURVE('',#10206,(#10210,#10217),.PCURVE_S1.);+#10206 = LINE('',#10207,#10208);+#10207 = CARTESIAN_POINT('',(0.168804279738,2.853030080082E-03,1.2500001+ ));+#10208 = VECTOR('',#10209,1.);+#10209 = DIRECTION('',(-0.,-0.,-1.));+#10210 = PCURVE('',#9155,#10211);+#10211 = DEFINITIONAL_REPRESENTATION('',(#10212),#10216);+#10212 = LINE('',#10213,#10214);+#10213 = CARTESIAN_POINT('',(0.,0.));+#10214 = VECTOR('',#10215,1.);+#10215 = DIRECTION('',(0.,-1.));+#10216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10217 = PCURVE('',#9125,#10218);+#10218 = DEFINITIONAL_REPRESENTATION('',(#10219),#10223);+#10219 = LINE('',#10220,#10221);+#10220 = CARTESIAN_POINT('',(1.,0.));+#10221 = VECTOR('',#10222,1.);+#10222 = DIRECTION('',(0.,-1.));+#10223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10224 = ORIENTED_EDGE('',*,*,#9139,.T.);+#10225 = ORIENTED_EDGE('',*,*,#9236,.F.);+#10226 = ADVANCED_FACE('',(#10227),#9125,.T.);+#10227 = FACE_BOUND('',#10228,.T.);+#10228 = EDGE_LOOP('',(#10229,#10230,#10251,#10252));+#10229 = ORIENTED_EDGE('',*,*,#9445,.T.);+#10230 = ORIENTED_EDGE('',*,*,#10231,.T.);+#10231 = EDGE_CURVE('',#9408,#9080,#10232,.T.);+#10232 = SURFACE_CURVE('',#10233,(#10237,#10244),.PCURVE_S1.);+#10233 = LINE('',#10234,#10235);+#10234 = CARTESIAN_POINT('',(0.163296346667,-3.376085594763E-02,+ 1.2500001));+#10235 = VECTOR('',#10236,1.);+#10236 = DIRECTION('',(-0.,-0.,-1.));+#10237 = PCURVE('',#9125,#10238);+#10238 = DEFINITIONAL_REPRESENTATION('',(#10239),#10243);+#10239 = LINE('',#10240,#10241);+#10240 = CARTESIAN_POINT('',(0.,0.));+#10241 = VECTOR('',#10242,1.);+#10242 = DIRECTION('',(0.,-1.));+#10243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10244 = PCURVE('',#9095,#10245);+#10245 = DEFINITIONAL_REPRESENTATION('',(#10246),#10250);+#10246 = LINE('',#10247,#10248);+#10247 = CARTESIAN_POINT('',(1.,0.));+#10248 = VECTOR('',#10249,1.);+#10249 = DIRECTION('',(0.,-1.));+#10250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10251 = ORIENTED_EDGE('',*,*,#9109,.T.);+#10252 = ORIENTED_EDGE('',*,*,#10204,.F.);+#10253 = ADVANCED_FACE('',(#10254),#9095,.T.);+#10254 = FACE_BOUND('',#10255,.T.);+#10255 = EDGE_LOOP('',(#10256,#10257,#10278,#10279));+#10256 = ORIENTED_EDGE('',*,*,#9407,.T.);+#10257 = ORIENTED_EDGE('',*,*,#10258,.T.);+#10258 = EDGE_CURVE('',#9379,#9050,#10259,.T.);+#10259 = SURFACE_CURVE('',#10260,(#10264,#10271),.PCURVE_S1.);+#10260 = LINE('',#10261,#10262);+#10261 = CARTESIAN_POINT('',(0.146534794946,-4.580698295242E-02,+ 1.2500001));+#10262 = VECTOR('',#10263,1.);+#10263 = DIRECTION('',(-0.,-0.,-1.));+#10264 = PCURVE('',#9095,#10265);+#10265 = DEFINITIONAL_REPRESENTATION('',(#10266),#10270);+#10266 = LINE('',#10267,#10268);+#10267 = CARTESIAN_POINT('',(0.,0.));+#10268 = VECTOR('',#10269,1.);+#10269 = DIRECTION('',(0.,-1.));+#10270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10271 = PCURVE('',#9065,#10272);+#10272 = DEFINITIONAL_REPRESENTATION('',(#10273),#10277);+#10273 = LINE('',#10274,#10275);+#10274 = CARTESIAN_POINT('',(1.,0.));+#10275 = VECTOR('',#10276,1.);+#10276 = DIRECTION('',(0.,-1.));+#10277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10278 = ORIENTED_EDGE('',*,*,#9079,.T.);+#10279 = ORIENTED_EDGE('',*,*,#10231,.F.);+#10280 = ADVANCED_FACE('',(#10281),#9065,.T.);+#10281 = FACE_BOUND('',#10282,.T.);+#10282 = EDGE_LOOP('',(#10283,#10284,#10305,#10306));+#10283 = ORIENTED_EDGE('',*,*,#9378,.T.);+#10284 = ORIENTED_EDGE('',*,*,#10285,.T.);+#10285 = EDGE_CURVE('',#9350,#9020,#10286,.T.);+#10286 = SURFACE_CURVE('',#10287,(#10291,#10298),.PCURVE_S1.);+#10287 = LINE('',#10288,#10289);+#10288 = CARTESIAN_POINT('',(0.129852494061,-3.376085594763E-02,+ 1.2500001));+#10289 = VECTOR('',#10290,1.);+#10290 = DIRECTION('',(-0.,-0.,-1.));+#10291 = PCURVE('',#9065,#10292);+#10292 = DEFINITIONAL_REPRESENTATION('',(#10293),#10297);+#10293 = LINE('',#10294,#10295);+#10294 = CARTESIAN_POINT('',(0.,0.));+#10295 = VECTOR('',#10296,1.);+#10296 = DIRECTION('',(0.,-1.));+#10297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10298 = PCURVE('',#9035,#10299);+#10299 = DEFINITIONAL_REPRESENTATION('',(#10300),#10304);+#10300 = LINE('',#10301,#10302);+#10301 = CARTESIAN_POINT('',(1.,0.));+#10302 = VECTOR('',#10303,1.);+#10303 = DIRECTION('',(0.,-1.));+#10304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10305 = ORIENTED_EDGE('',*,*,#9049,.T.);+#10306 = ORIENTED_EDGE('',*,*,#10258,.F.);+#10307 = ADVANCED_FACE('',(#10308),#9035,.T.);+#10308 = FACE_BOUND('',#10309,.T.);+#10309 = EDGE_LOOP('',(#10310,#10311,#10332,#10333));+#10310 = ORIENTED_EDGE('',*,*,#9349,.T.);+#10311 = ORIENTED_EDGE('',*,*,#10312,.T.);+#10312 = EDGE_CURVE('',#9321,#8990,#10313,.T.);+#10313 = SURFACE_CURVE('',#10314,(#10318,#10325),.PCURVE_S1.);+#10314 = LINE('',#10315,#10316);+#10315 = CARTESIAN_POINT('',(0.12434456099,2.853030080082E-03,1.2500001)+ );+#10316 = VECTOR('',#10317,1.);+#10317 = DIRECTION('',(-0.,-0.,-1.));+#10318 = PCURVE('',#9035,#10319);+#10319 = DEFINITIONAL_REPRESENTATION('',(#10320),#10324);+#10320 = LINE('',#10321,#10322);+#10321 = CARTESIAN_POINT('',(0.,0.));+#10322 = VECTOR('',#10323,1.);+#10323 = DIRECTION('',(0.,-1.));+#10324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10325 = PCURVE('',#9005,#10326);+#10326 = DEFINITIONAL_REPRESENTATION('',(#10327),#10331);+#10327 = LINE('',#10328,#10329);+#10328 = CARTESIAN_POINT('',(1.,0.));+#10329 = VECTOR('',#10330,1.);+#10330 = DIRECTION('',(0.,-1.));+#10331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10332 = ORIENTED_EDGE('',*,*,#9019,.T.);+#10333 = ORIENTED_EDGE('',*,*,#10285,.F.);+#10334 = ADVANCED_FACE('',(#10335),#9005,.T.);+#10335 = FACE_BOUND('',#10336,.T.);+#10336 = EDGE_LOOP('',(#10337,#10338,#10359,#10360));+#10337 = ORIENTED_EDGE('',*,*,#9320,.T.);+#10338 = ORIENTED_EDGE('',*,*,#10339,.T.);+#10339 = EDGE_CURVE('',#9283,#8960,#10340,.T.);+#10340 = SURFACE_CURVE('',#10341,(#10345,#10352),.PCURVE_S1.);+#10341 = LINE('',#10342,#10343);+#10342 = CARTESIAN_POINT('',(0.129852494061,3.954616694335E-02,1.2500001+ ));+#10343 = VECTOR('',#10344,1.);+#10344 = DIRECTION('',(-0.,-0.,-1.));+#10345 = PCURVE('',#9005,#10346);+#10346 = DEFINITIONAL_REPRESENTATION('',(#10347),#10351);+#10347 = LINE('',#10348,#10349);+#10348 = CARTESIAN_POINT('',(0.,0.));+#10349 = VECTOR('',#10350,1.);+#10350 = DIRECTION('',(0.,-1.));+#10351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10352 = PCURVE('',#8975,#10353);+#10353 = DEFINITIONAL_REPRESENTATION('',(#10354),#10358);+#10354 = LINE('',#10355,#10356);+#10355 = CARTESIAN_POINT('',(1.,0.));+#10356 = VECTOR('',#10357,1.);+#10357 = DIRECTION('',(0.,-1.));+#10358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10359 = ORIENTED_EDGE('',*,*,#8989,.T.);+#10360 = ORIENTED_EDGE('',*,*,#10312,.F.);+#10361 = ADVANCED_FACE('',(#10362),#8975,.T.);+#10362 = FACE_BOUND('',#10363,.T.);+#10363 = EDGE_LOOP('',(#10364,#10365,#10366,#10367));+#10364 = ORIENTED_EDGE('',*,*,#9282,.T.);+#10365 = ORIENTED_EDGE('',*,*,#9258,.T.);+#10366 = ORIENTED_EDGE('',*,*,#8957,.T.);+#10367 = ORIENTED_EDGE('',*,*,#10339,.F.);+#10368 = ADVANCED_FACE('',(#10369),#4415,.T.);+#10369 = FACE_BOUND('',#10370,.T.);+#10370 = EDGE_LOOP('',(#10371,#10372,#10393,#10394));+#10371 = ORIENTED_EDGE('',*,*,#4395,.T.);+#10372 = ORIENTED_EDGE('',*,*,#10373,.T.);+#10373 = EDGE_CURVE('',#4360,#8911,#10374,.T.);+#10374 = SURFACE_CURVE('',#10375,(#10379,#10386),.PCURVE_S1.);+#10375 = LINE('',#10376,#10377);+#10376 = CARTESIAN_POINT('',(0.108256641372,2.853030080082E-03,1.2500001+ ));+#10377 = VECTOR('',#10378,1.);+#10378 = DIRECTION('',(-0.,-0.,-1.));+#10379 = PCURVE('',#4415,#10380);+#10380 = DEFINITIONAL_REPRESENTATION('',(#10381),#10385);+#10381 = LINE('',#10382,#10383);+#10382 = CARTESIAN_POINT('',(0.,0.));+#10383 = VECTOR('',#10384,1.);+#10384 = DIRECTION('',(0.,-1.));+#10385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10386 = PCURVE('',#4379,#10387);+#10387 = DEFINITIONAL_REPRESENTATION('',(#10388),#10392);+#10388 = LINE('',#10389,#10390);+#10389 = CARTESIAN_POINT('',(1.,0.));+#10390 = VECTOR('',#10391,1.);+#10391 = DIRECTION('',(0.,-1.));+#10392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10393 = ORIENTED_EDGE('',*,*,#8933,.T.);+#10394 = ORIENTED_EDGE('',*,*,#8720,.F.);+#10395 = ADVANCED_FACE('',(#10396),#4379,.T.);+#10396 = FACE_BOUND('',#10397,.T.);+#10397 = EDGE_LOOP('',(#10398,#10399,#10420,#10421));+#10398 = ORIENTED_EDGE('',*,*,#4359,.T.);+#10399 = ORIENTED_EDGE('',*,*,#10400,.T.);+#10400 = EDGE_CURVE('',#4324,#8888,#10401,.T.);+#10401 = SURFACE_CURVE('',#10402,(#10406,#10413),.PCURVE_S1.);+#10402 = LINE('',#10403,#10404);+#10403 = CARTESIAN_POINT('',(0.11792524331,-4.295395287234E-02,1.2500001+ ));+#10404 = VECTOR('',#10405,1.);+#10405 = DIRECTION('',(-0.,-0.,-1.));+#10406 = PCURVE('',#4379,#10407);+#10407 = DEFINITIONAL_REPRESENTATION('',(#10408),#10412);+#10408 = LINE('',#10409,#10410);+#10409 = CARTESIAN_POINT('',(0.,0.));+#10410 = VECTOR('',#10411,1.);+#10411 = DIRECTION('',(0.,-1.));+#10412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10413 = PCURVE('',#4343,#10414);+#10414 = DEFINITIONAL_REPRESENTATION('',(#10415),#10419);+#10415 = LINE('',#10416,#10417);+#10416 = CARTESIAN_POINT('',(1.,0.));+#10417 = VECTOR('',#10418,1.);+#10418 = DIRECTION('',(0.,-1.));+#10419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10420 = ORIENTED_EDGE('',*,*,#8910,.T.);+#10421 = ORIENTED_EDGE('',*,*,#10373,.F.);+#10422 = ADVANCED_FACE('',(#10423),#4343,.T.);+#10423 = FACE_BOUND('',#10424,.T.);+#10424 = EDGE_LOOP('',(#10425,#10426,#10447,#10448));+#10425 = ORIENTED_EDGE('',*,*,#4323,.T.);+#10426 = ORIENTED_EDGE('',*,*,#10427,.T.);+#10427 = EDGE_CURVE('',#4288,#8865,#10428,.T.);+#10428 = SURFACE_CURVE('',#10429,(#10433,#10440),.PCURVE_S1.);+#10429 = LINE('',#10430,#10431);+#10430 = CARTESIAN_POINT('',(0.146534794946,-5.848711664167E-02,+ 1.2500001));+#10431 = VECTOR('',#10432,1.);+#10432 = DIRECTION('',(-0.,-0.,-1.));+#10433 = PCURVE('',#4343,#10434);+#10434 = DEFINITIONAL_REPRESENTATION('',(#10435),#10439);+#10435 = LINE('',#10436,#10437);+#10436 = CARTESIAN_POINT('',(0.,0.));+#10437 = VECTOR('',#10438,1.);+#10438 = DIRECTION('',(0.,-1.));+#10439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10440 = PCURVE('',#4307,#10441);+#10441 = DEFINITIONAL_REPRESENTATION('',(#10442),#10446);+#10442 = LINE('',#10443,#10444);+#10443 = CARTESIAN_POINT('',(1.,0.));+#10444 = VECTOR('',#10445,1.);+#10445 = DIRECTION('',(0.,-1.));+#10446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10447 = ORIENTED_EDGE('',*,*,#8887,.T.);+#10448 = ORIENTED_EDGE('',*,*,#10400,.F.);+#10449 = ADVANCED_FACE('',(#10450),#4307,.T.);+#10450 = FACE_BOUND('',#10451,.T.);+#10451 = EDGE_LOOP('',(#10452,#10453,#10474,#10475));+#10452 = ORIENTED_EDGE('',*,*,#4287,.T.);+#10453 = ORIENTED_EDGE('',*,*,#10454,.T.);+#10454 = EDGE_CURVE('',#4252,#8842,#10455,.T.);+#10455 = SURFACE_CURVE('',#10456,(#10460,#10467),.PCURVE_S1.);+#10456 = LINE('',#10457,#10458);+#10457 = CARTESIAN_POINT('',(0.175183972001,-4.295395287234E-02,+ 1.2500001));+#10458 = VECTOR('',#10459,1.);+#10459 = DIRECTION('',(-0.,-0.,-1.));+#10460 = PCURVE('',#4307,#10461);+#10461 = DEFINITIONAL_REPRESENTATION('',(#10462),#10466);+#10462 = LINE('',#10463,#10464);+#10463 = CARTESIAN_POINT('',(0.,0.));+#10464 = VECTOR('',#10465,1.);+#10465 = DIRECTION('',(0.,-1.));+#10466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10467 = PCURVE('',#4271,#10468);+#10468 = DEFINITIONAL_REPRESENTATION('',(#10469),#10473);+#10469 = LINE('',#10470,#10471);+#10470 = CARTESIAN_POINT('',(1.,0.));+#10471 = VECTOR('',#10472,1.);+#10472 = DIRECTION('',(0.,-1.));+#10473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10474 = ORIENTED_EDGE('',*,*,#8864,.T.);+#10475 = ORIENTED_EDGE('',*,*,#10427,.F.);+#10476 = ADVANCED_FACE('',(#10477),#4271,.T.);+#10477 = FACE_BOUND('',#10478,.T.);+#10478 = EDGE_LOOP('',(#10479,#10480,#10501,#10502));+#10479 = ORIENTED_EDGE('',*,*,#4251,.T.);+#10480 = ORIENTED_EDGE('',*,*,#10481,.T.);+#10481 = EDGE_CURVE('',#4216,#8819,#10482,.T.);+#10482 = SURFACE_CURVE('',#10483,(#10487,#10494),.PCURVE_S1.);+#10483 = LINE('',#10484,#10485);+#10484 = CARTESIAN_POINT('',(0.184892199356,2.853030080082E-03,1.2500001+ ));+#10485 = VECTOR('',#10486,1.);+#10486 = DIRECTION('',(-0.,-0.,-1.));+#10487 = PCURVE('',#4271,#10488);+#10488 = DEFINITIONAL_REPRESENTATION('',(#10489),#10493);+#10489 = LINE('',#10490,#10491);+#10490 = CARTESIAN_POINT('',(0.,0.));+#10491 = VECTOR('',#10492,1.);+#10492 = DIRECTION('',(0.,-1.));+#10493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10494 = PCURVE('',#4235,#10495);+#10495 = DEFINITIONAL_REPRESENTATION('',(#10496),#10500);+#10496 = LINE('',#10497,#10498);+#10497 = CARTESIAN_POINT('',(1.,0.));+#10498 = VECTOR('',#10499,1.);+#10499 = DIRECTION('',(0.,-1.));+#10500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10501 = ORIENTED_EDGE('',*,*,#8841,.T.);+#10502 = ORIENTED_EDGE('',*,*,#10454,.F.);+#10503 = ADVANCED_FACE('',(#10504),#4235,.T.);+#10504 = FACE_BOUND('',#10505,.T.);+#10505 = EDGE_LOOP('',(#10506,#10507,#10528,#10529));+#10506 = ORIENTED_EDGE('',*,*,#4215,.T.);+#10507 = ORIENTED_EDGE('',*,*,#10508,.T.);+#10508 = EDGE_CURVE('',#4178,#8796,#10509,.T.);+#10509 = SURFACE_CURVE('',#10510,(#10514,#10521),.PCURVE_S1.);+#10510 = LINE('',#10511,#10512);+#10511 = CARTESIAN_POINT('',(0.175183972001,4.873926386806E-02,1.2500001+ ));+#10512 = VECTOR('',#10513,1.);+#10513 = DIRECTION('',(-0.,-0.,-1.));+#10514 = PCURVE('',#4235,#10515);+#10515 = DEFINITIONAL_REPRESENTATION('',(#10516),#10520);+#10516 = LINE('',#10517,#10518);+#10517 = CARTESIAN_POINT('',(0.,0.));+#10518 = VECTOR('',#10519,1.);+#10519 = DIRECTION('',(0.,-1.));+#10520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10521 = PCURVE('',#4199,#10522);+#10522 = DEFINITIONAL_REPRESENTATION('',(#10523),#10527);+#10523 = LINE('',#10524,#10525);+#10524 = CARTESIAN_POINT('',(1.,0.));+#10525 = VECTOR('',#10526,1.);+#10526 = DIRECTION('',(0.,-1.));+#10527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10528 = ORIENTED_EDGE('',*,*,#8818,.T.);+#10529 = ORIENTED_EDGE('',*,*,#10481,.F.);+#10530 = ADVANCED_FACE('',(#10531),#4199,.T.);+#10531 = FACE_BOUND('',#10532,.T.);+#10532 = EDGE_LOOP('',(#10533,#10534,#10535,#10536));+#10533 = ORIENTED_EDGE('',*,*,#4177,.T.);+#10534 = ORIENTED_EDGE('',*,*,#8771,.T.);+#10535 = ORIENTED_EDGE('',*,*,#8795,.T.);+#10536 = ORIENTED_EDGE('',*,*,#10508,.F.);+#10537 = ADVANCED_FACE('',(#10538),#4159,.T.);+#10538 = FACE_BOUND('',#10539,.T.);+#10539 = EDGE_LOOP('',(#10540,#10541,#10564,#10592));+#10540 = ORIENTED_EDGE('',*,*,#4141,.T.);+#10541 = ORIENTED_EDGE('',*,*,#10542,.T.);+#10542 = EDGE_CURVE('',#4106,#10543,#10545,.T.);+#10543 = VERTEX_POINT('',#10544);+#10544 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,+ 1.1500001));+#10545 = SURFACE_CURVE('',#10546,(#10550,#10557),.PCURVE_S1.);+#10546 = LINE('',#10547,#10548);+#10547 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,+ 1.2500001));+#10548 = VECTOR('',#10549,1.);+#10549 = DIRECTION('',(-0.,-0.,-1.));+#10550 = PCURVE('',#4159,#10551);+#10551 = DEFINITIONAL_REPRESENTATION('',(#10552),#10556);+#10552 = LINE('',#10553,#10554);+#10553 = CARTESIAN_POINT('',(0.,0.));+#10554 = VECTOR('',#10555,1.);+#10555 = DIRECTION('',(0.,-1.));+#10556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10557 = PCURVE('',#4125,#10558);+#10558 = DEFINITIONAL_REPRESENTATION('',(#10559),#10563);+#10559 = LINE('',#10560,#10561);+#10560 = CARTESIAN_POINT('',(1.,0.));+#10561 = VECTOR('',#10562,1.);+#10562 = DIRECTION('',(0.,-1.));+#10563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10564 = ORIENTED_EDGE('',*,*,#10565,.T.);+#10565 = EDGE_CURVE('',#10543,#10566,#10568,.T.);+#10566 = VERTEX_POINT('',#10567);+#10567 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,+ 1.1500001));+#10568 = SURFACE_CURVE('',#10569,(#10573,#10580),.PCURVE_S1.);+#10569 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10570,#10571,#10572),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10570 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,+ 1.1500001));+#10571 = CARTESIAN_POINT('',(2.298274231177E-02,4.041792613449E-03,+ 1.1500001));+#10572 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,+ 1.1500001));+#10573 = PCURVE('',#4159,#10574);+#10574 = DEFINITIONAL_REPRESENTATION('',(#10575),#10579);+#10575 = LINE('',#10576,#10577);+#10576 = CARTESIAN_POINT('',(0.,-0.1));+#10577 = VECTOR('',#10578,1.);+#10578 = DIRECTION('',(1.,0.));+#10579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10580 = PCURVE('',#10581,#10586);+#10581 = PLANE('',#10582);+#10582 = AXIS2_PLACEMENT_3D('',#10583,#10584,#10585);+#10583 = CARTESIAN_POINT('',(0.,-5.618884241049E-02,1.1500001));+#10584 = DIRECTION('',(0.,0.,1.));+#10585 = DIRECTION('',(1.,0.,0.));+#10586 = DEFINITIONAL_REPRESENTATION('',(#10587),#10591);+#10587 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10588,#10589,#10590),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10588 = CARTESIAN_POINT('',(1.668230088492E-02,5.226592605038E-02));+#10589 = CARTESIAN_POINT('',(2.298274231177E-02,6.023063502394E-02));+#10590 = CARTESIAN_POINT('',(3.487036764544E-02,6.284591259735E-02));+#10591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10592 = ORIENTED_EDGE('',*,*,#10593,.F.);+#10593 = EDGE_CURVE('',#3593,#10566,#10594,.T.);+#10594 = SURFACE_CURVE('',#10595,(#10599,#10606),.PCURVE_S1.);+#10595 = LINE('',#10596,#10597);+#10596 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,+ 1.2500001));+#10597 = VECTOR('',#10598,1.);+#10598 = DIRECTION('',(-0.,-0.,-1.));+#10599 = PCURVE('',#4159,#10600);+#10600 = DEFINITIONAL_REPRESENTATION('',(#10601),#10605);+#10601 = LINE('',#10602,#10603);+#10602 = CARTESIAN_POINT('',(1.,0.));+#10603 = VECTOR('',#10604,1.);+#10604 = DIRECTION('',(0.,-1.));+#10605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10606 = PCURVE('',#3612,#10607);+#10607 = DEFINITIONAL_REPRESENTATION('',(#10608),#10612);+#10608 = LINE('',#10609,#10610);+#10609 = CARTESIAN_POINT('',(0.,0.));+#10610 = VECTOR('',#10611,1.);+#10611 = DIRECTION('',(0.,-1.));+#10612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10613 = ADVANCED_FACE('',(#10614,#10960,#11202),#10581,.T.);+#10614 = FACE_BOUND('',#10615,.F.);+#10615 = EDGE_LOOP('',(#10616,#10639,#10662,#10685,#10708,#10731,#10754,+ #10777,#10800,#10823,#10846,#10869,#10892,#10915,#10938,#10959));+#10616 = ORIENTED_EDGE('',*,*,#10617,.T.);+#10617 = EDGE_CURVE('',#10566,#10618,#10620,.T.);+#10618 = VERTEX_POINT('',#10619);+#10619 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,+ 1.1500001));+#10620 = SURFACE_CURVE('',#10621,(#10625,#10632),.PCURVE_S1.);+#10621 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10622,#10623,#10624),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10622 = CARTESIAN_POINT('',(3.487036764544E-02,6.657070186857E-03,+ 1.1500001));+#10623 = CARTESIAN_POINT('',(2.464700985848E-02,9.272347760265E-03,+ 1.1500001));+#10624 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,+ 1.1500001));+#10625 = PCURVE('',#10581,#10626);+#10626 = DEFINITIONAL_REPRESENTATION('',(#10627),#10631);+#10627 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10628,#10629,#10630),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10628 = CARTESIAN_POINT('',(3.487036764544E-02,6.284591259735E-02));+#10629 = CARTESIAN_POINT('',(2.464700985848E-02,6.546119017076E-02));+#10630 = CARTESIAN_POINT('',(1.890132428054E-02,7.259376537096E-02));+#10631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10632 = PCURVE('',#3612,#10633);+#10633 = DEFINITIONAL_REPRESENTATION('',(#10634),#10638);+#10634 = LINE('',#10635,#10636);+#10635 = CARTESIAN_POINT('',(0.,-0.1));+#10636 = VECTOR('',#10637,1.);+#10637 = DIRECTION('',(1.,0.));+#10638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10639 = ORIENTED_EDGE('',*,*,#10640,.T.);+#10640 = EDGE_CURVE('',#10618,#10641,#10643,.T.);+#10641 = VERTEX_POINT('',#10642);+#10642 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,+ 1.1500001));+#10643 = SURFACE_CURVE('',#10644,(#10648,#10655),.PCURVE_S1.);+#10644 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10645,#10646,#10647),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10645 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,+ 1.1500001));+#10646 = CARTESIAN_POINT('',(1.31556387026E-02,2.353749816067E-02,+ 1.1500001));+#10647 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,+ 1.1500001));+#10648 = PCURVE('',#10581,#10649);+#10649 = DEFINITIONAL_REPRESENTATION('',(#10650),#10654);+#10650 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10651,#10652,#10653),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10651 = CARTESIAN_POINT('',(1.890132428054E-02,7.259376537096E-02));+#10652 = CARTESIAN_POINT('',(1.31556387026E-02,7.972634057117E-02));+#10653 = CARTESIAN_POINT('',(1.31556387026E-02,8.979119668701E-02));+#10654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10655 = PCURVE('',#3648,#10656);+#10656 = DEFINITIONAL_REPRESENTATION('',(#10657),#10661);+#10657 = LINE('',#10658,#10659);+#10658 = CARTESIAN_POINT('',(0.,-0.1));+#10659 = VECTOR('',#10660,1.);+#10660 = DIRECTION('',(1.,0.));+#10661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10662 = ORIENTED_EDGE('',*,*,#10663,.T.);+#10663 = EDGE_CURVE('',#10641,#10664,#10666,.T.);+#10664 = VERTEX_POINT('',#10665);+#10665 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,+ 1.1500001));+#10666 = SURFACE_CURVE('',#10667,(#10671,#10678),.PCURVE_S1.);+#10667 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10668,#10669,#10670),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10668 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,+ 1.1500001));+#10669 = CARTESIAN_POINT('',(1.31556387026E-02,4.770900300581E-02,+ 1.1500001));+#10670 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,+ 1.1500001));+#10671 = PCURVE('',#10581,#10672);+#10672 = DEFINITIONAL_REPRESENTATION('',(#10673),#10677);+#10673 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10674,#10675,#10676),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10674 = CARTESIAN_POINT('',(1.31556387026E-02,8.979119668701E-02));+#10675 = CARTESIAN_POINT('',(1.31556387026E-02,0.103897845416));+#10676 = CARTESIAN_POINT('',(2.274498980509E-02,0.112179557732));+#10677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10678 = PCURVE('',#3684,#10679);+#10679 = DEFINITIONAL_REPRESENTATION('',(#10680),#10684);+#10680 = LINE('',#10681,#10682);+#10681 = CARTESIAN_POINT('',(0.,-0.1));+#10682 = VECTOR('',#10683,1.);+#10683 = DIRECTION('',(1.,0.));+#10684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10685 = ORIENTED_EDGE('',*,*,#10686,.T.);+#10686 = EDGE_CURVE('',#10664,#10687,#10689,.T.);+#10687 = VERTEX_POINT('',#10688);+#10688 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,+ 1.1500001));+#10689 = SURFACE_CURVE('',#10690,(#10694,#10701),.PCURVE_S1.);+#10690 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10691,#10692,#10693),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10691 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,+ 1.1500001));+#10692 = CARTESIAN_POINT('',(3.233434090759E-02,6.427242763739E-02,+ 1.1500001));+#10693 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,+ 1.1500001));+#10694 = PCURVE('',#10581,#10695);+#10695 = DEFINITIONAL_REPRESENTATION('',(#10696),#10700);+#10696 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10697,#10698,#10699),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10697 = CARTESIAN_POINT('',(2.274498980509E-02,0.112179557732));+#10698 = CARTESIAN_POINT('',(3.233434090759E-02,0.120461270048));+#10699 = CARTESIAN_POINT('',(4.881851470362E-02,0.120461270048));+#10700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10701 = PCURVE('',#3720,#10702);+#10702 = DEFINITIONAL_REPRESENTATION('',(#10703),#10707);+#10703 = LINE('',#10704,#10705);+#10704 = CARTESIAN_POINT('',(0.,-0.1));+#10705 = VECTOR('',#10706,1.);+#10706 = DIRECTION('',(1.,0.));+#10707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10708 = ORIENTED_EDGE('',*,*,#10709,.T.);+#10709 = EDGE_CURVE('',#10687,#10710,#10712,.T.);+#10710 = VERTEX_POINT('',#10711);+#10711 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,+ 1.1500001));+#10712 = SURFACE_CURVE('',#10713,(#10717,#10724),.PCURVE_S1.);+#10713 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10714,#10715,#10716),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10714 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,+ 1.1500001));+#10715 = CARTESIAN_POINT('',(6.53819393352E-02,6.427242763739E-02,+ 1.1500001));+#10716 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,+ 1.1500001));+#10717 = PCURVE('',#10581,#10718);+#10718 = DEFINITIONAL_REPRESENTATION('',(#10719),#10723);+#10719 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10720,#10721,#10722),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10720 = CARTESIAN_POINT('',(4.881851470362E-02,0.120461270048));+#10721 = CARTESIAN_POINT('',(6.53819393352E-02,0.120461270048));+#10722 = CARTESIAN_POINT('',(7.49712904377E-02,0.112179557732));+#10723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10724 = PCURVE('',#3756,#10725);+#10725 = DEFINITIONAL_REPRESENTATION('',(#10726),#10730);+#10726 = LINE('',#10727,#10728);+#10727 = CARTESIAN_POINT('',(0.,-0.1));+#10728 = VECTOR('',#10729,1.);+#10729 = DIRECTION('',(1.,0.));+#10730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10731 = ORIENTED_EDGE('',*,*,#10732,.T.);+#10732 = EDGE_CURVE('',#10710,#10733,#10735,.T.);+#10733 = VERTEX_POINT('',#10734);+#10734 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,+ 1.1500001));+#10735 = SURFACE_CURVE('',#10736,(#10740,#10747),.PCURVE_S1.);+#10736 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10737,#10738,#10739),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10737 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,+ 1.1500001));+#10738 = CARTESIAN_POINT('',(8.456064154019E-02,4.770900300581E-02,+ 1.1500001));+#10739 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,+ 1.1500001));+#10740 = PCURVE('',#10581,#10741);+#10741 = DEFINITIONAL_REPRESENTATION('',(#10742),#10746);+#10742 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10743,#10744,#10745),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10743 = CARTESIAN_POINT('',(7.49712904377E-02,0.112179557732));+#10744 = CARTESIAN_POINT('',(8.456064154019E-02,0.103897845416));+#10745 = CARTESIAN_POINT('',(8.456064154019E-02,8.979119668701E-02));+#10746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10747 = PCURVE('',#3792,#10748);+#10748 = DEFINITIONAL_REPRESENTATION('',(#10749),#10753);+#10749 = LINE('',#10750,#10751);+#10750 = CARTESIAN_POINT('',(0.,-0.1));+#10751 = VECTOR('',#10752,1.);+#10752 = DIRECTION('',(1.,0.));+#10753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10754 = ORIENTED_EDGE('',*,*,#10755,.T.);+#10755 = EDGE_CURVE('',#10733,#10756,#10758,.T.);+#10756 = VERTEX_POINT('',#10757);+#10757 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,+ 1.1500001));+#10758 = SURFACE_CURVE('',#10759,(#10763,#10770),.PCURVE_S1.);+#10759 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10760,#10761,#10762),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10760 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,+ 1.1500001));+#10761 = CARTESIAN_POINT('',(8.456064154019E-02,2.353749816067E-02,+ 1.1500001));+#10762 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,+ 1.1500001));+#10763 = PCURVE('',#10581,#10764);+#10764 = DEFINITIONAL_REPRESENTATION('',(#10765),#10769);+#10765 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10766,#10767,#10768),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10766 = CARTESIAN_POINT('',(8.456064154019E-02,8.979119668701E-02));+#10767 = CARTESIAN_POINT('',(8.456064154019E-02,7.972634057117E-02));+#10768 = CARTESIAN_POINT('',(7.881495596225E-02,7.259376537096E-02));+#10769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10770 = PCURVE('',#3828,#10771);+#10771 = DEFINITIONAL_REPRESENTATION('',(#10772),#10776);+#10772 = LINE('',#10773,#10774);+#10773 = CARTESIAN_POINT('',(0.,-0.1));+#10774 = VECTOR('',#10775,1.);+#10775 = DIRECTION('',(1.,0.));+#10776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10777 = ORIENTED_EDGE('',*,*,#10778,.T.);+#10778 = EDGE_CURVE('',#10756,#10779,#10781,.T.);+#10779 = VERTEX_POINT('',#10780);+#10780 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,+ 1.1500001));+#10781 = SURFACE_CURVE('',#10782,(#10786,#10793),.PCURVE_S1.);+#10782 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10783,#10784,#10785),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10783 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,+ 1.1500001));+#10784 = CARTESIAN_POINT('',(7.306927038431E-02,9.272347760265E-03,+ 1.1500001));+#10785 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,+ 1.1500001));+#10786 = PCURVE('',#10581,#10787);+#10787 = DEFINITIONAL_REPRESENTATION('',(#10788),#10792);+#10788 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10789,#10790,#10791),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10789 = CARTESIAN_POINT('',(7.881495596225E-02,7.259376537096E-02));+#10790 = CARTESIAN_POINT('',(7.306927038431E-02,6.546119017076E-02));+#10791 = CARTESIAN_POINT('',(6.284591259735E-02,6.284591259735E-02));+#10792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10793 = PCURVE('',#3864,#10794);+#10794 = DEFINITIONAL_REPRESENTATION('',(#10795),#10799);+#10795 = LINE('',#10796,#10797);+#10796 = CARTESIAN_POINT('',(0.,-0.1));+#10797 = VECTOR('',#10798,1.);+#10798 = DIRECTION('',(1.,0.));+#10799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10800 = ORIENTED_EDGE('',*,*,#10801,.T.);+#10801 = EDGE_CURVE('',#10779,#10802,#10804,.T.);+#10802 = VERTEX_POINT('',#10803);+#10803 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,+ 1.1500001));+#10804 = SURFACE_CURVE('',#10805,(#10809,#10816),.PCURVE_S1.);+#10805 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10806,#10807,#10808),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10806 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,+ 1.1500001));+#10807 = CARTESIAN_POINT('',(7.473353793102E-02,4.041792613449E-03,+ 1.1500001));+#10808 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,+ 1.1500001));+#10809 = PCURVE('',#10581,#10810);+#10810 = DEFINITIONAL_REPRESENTATION('',(#10811),#10815);+#10811 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10812,#10813,#10814),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10812 = CARTESIAN_POINT('',(6.284591259735E-02,6.284591259735E-02));+#10813 = CARTESIAN_POINT('',(7.473353793102E-02,6.023063502394E-02));+#10814 = CARTESIAN_POINT('',(8.103397935787E-02,5.230555146816E-02));+#10815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10816 = PCURVE('',#3900,#10817);+#10817 = DEFINITIONAL_REPRESENTATION('',(#10818),#10822);+#10818 = LINE('',#10819,#10820);+#10819 = CARTESIAN_POINT('',(0.,-0.1));+#10820 = VECTOR('',#10821,1.);+#10821 = DIRECTION('',(1.,0.));+#10822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10823 = ORIENTED_EDGE('',*,*,#10824,.T.);+#10824 = EDGE_CURVE('',#10802,#10825,#10827,.T.);+#10825 = VERTEX_POINT('',#10826);+#10826 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,+ 1.1500001));+#10827 = SURFACE_CURVE('',#10828,(#10832,#10839),.PCURVE_S1.);+#10828 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10829,#10830,#10831),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10829 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,+ 1.1500001));+#10830 = CARTESIAN_POINT('',(8.733442078472E-02,-1.180837449812E-02,+ 1.1500001));+#10831 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,+ 1.1500001));+#10832 = PCURVE('',#10581,#10833);+#10833 = DEFINITIONAL_REPRESENTATION('',(#10834),#10838);+#10834 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10835,#10836,#10837),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10835 = CARTESIAN_POINT('',(8.103397935787E-02,5.230555146816E-02));+#10836 = CARTESIAN_POINT('',(8.733442078472E-02,4.438046791238E-02));+#10837 = CARTESIAN_POINT('',(8.733442078472E-02,3.177958505869E-02));+#10838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10839 = PCURVE('',#3936,#10840);+#10840 = DEFINITIONAL_REPRESENTATION('',(#10841),#10845);+#10841 = LINE('',#10842,#10843);+#10842 = CARTESIAN_POINT('',(0.,-0.1));+#10843 = VECTOR('',#10844,1.);+#10844 = DIRECTION('',(1.,0.));+#10845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10846 = ORIENTED_EDGE('',*,*,#10847,.T.);+#10847 = EDGE_CURVE('',#10825,#10848,#10850,.T.);+#10848 = VERTEX_POINT('',#10849);+#10849 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,+ 1.1500001));+#10850 = SURFACE_CURVE('',#10851,(#10855,#10862),.PCURVE_S1.);+#10851 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10852,#10853,#10854),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10852 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,+ 1.1500001));+#10853 = CARTESIAN_POINT('',(8.733442078472E-02,-4.041792613449E-02,+ 1.1500001));+#10854 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,+ 1.1500001));+#10855 = PCURVE('',#10581,#10856);+#10856 = DEFINITIONAL_REPRESENTATION('',(#10857),#10861);+#10857 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10858,#10859,#10860),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10858 = CARTESIAN_POINT('',(8.733442078472E-02,3.177958505869E-02));+#10859 = CARTESIAN_POINT('',(8.733442078472E-02,1.577091627601E-02));+#10860 = CARTESIAN_POINT('',(7.711106299776E-02,6.736321022415E-03));+#10861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10862 = PCURVE('',#3978,#10863);+#10863 = DEFINITIONAL_REPRESENTATION('',(#10864),#10868);+#10864 = LINE('',#10865,#10866);+#10865 = CARTESIAN_POINT('',(0.,-0.1));+#10866 = VECTOR('',#10867,1.);+#10867 = DIRECTION('',(1.,0.));+#10868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10869 = ORIENTED_EDGE('',*,*,#10870,.T.);+#10870 = EDGE_CURVE('',#10848,#10871,#10873,.T.);+#10871 = VERTEX_POINT('',#10872);+#10872 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,+ 1.1500001));+#10873 = SURFACE_CURVE('',#10874,(#10878,#10885),.PCURVE_S1.);+#10874 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10875,#10876,#10877),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10875 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,+ 1.1500001));+#10876 = CARTESIAN_POINT('',(6.68877052108E-02,-5.848711664167E-02,+ 1.1500001));+#10877 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,+ 1.1500001));+#10878 = PCURVE('',#10581,#10879);+#10879 = DEFINITIONAL_REPRESENTATION('',(#10880),#10884);+#10880 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10881,#10882,#10883),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10881 = CARTESIAN_POINT('',(7.711106299776E-02,6.736321022415E-03));+#10882 = CARTESIAN_POINT('',(6.68877052108E-02,-2.298274231177E-03));+#10883 = CARTESIAN_POINT('',(4.881851470362E-02,-2.298274231177E-03));+#10884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10885 = PCURVE('',#4017,#10886);+#10886 = DEFINITIONAL_REPRESENTATION('',(#10887),#10891);+#10887 = LINE('',#10888,#10889);+#10888 = CARTESIAN_POINT('',(0.,-0.1));+#10889 = VECTOR('',#10890,1.);+#10890 = DIRECTION('',(1.,0.));+#10891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10892 = ORIENTED_EDGE('',*,*,#10893,.T.);+#10893 = EDGE_CURVE('',#10871,#10894,#10896,.T.);+#10894 = VERTEX_POINT('',#10895);+#10895 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,+ 1.1500001));+#10896 = SURFACE_CURVE('',#10897,(#10901,#10908),.PCURVE_S1.);+#10897 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10898,#10899,#10900),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10898 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,+ 1.1500001));+#10899 = CARTESIAN_POINT('',(3.074932419643E-02,-5.848711664167E-02,+ 1.1500001));+#10900 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,+ 1.1500001));+#10901 = PCURVE('',#10581,#10902);+#10902 = DEFINITIONAL_REPRESENTATION('',(#10903),#10907);+#10903 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10904,#10905,#10906),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10904 = CARTESIAN_POINT('',(4.881851470362E-02,-2.298274231177E-03));+#10905 = CARTESIAN_POINT('',(3.074932419643E-02,-2.298274231177E-03));+#10906 = CARTESIAN_POINT('',(2.056559182725E-02,6.696695604636E-03));+#10907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10908 = PCURVE('',#4053,#10909);+#10909 = DEFINITIONAL_REPRESENTATION('',(#10910),#10914);+#10910 = LINE('',#10911,#10912);+#10911 = CARTESIAN_POINT('',(0.,-0.1));+#10912 = VECTOR('',#10913,1.);+#10913 = DIRECTION('',(1.,0.));+#10914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10915 = ORIENTED_EDGE('',*,*,#10916,.T.);+#10916 = EDGE_CURVE('',#10894,#10917,#10919,.T.);+#10917 = VERTEX_POINT('',#10918);+#10918 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,+ 1.1500001));+#10919 = SURFACE_CURVE('',#10920,(#10924,#10931),.PCURVE_S1.);+#10920 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10921,#10922,#10923),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10921 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,+ 1.1500001));+#10922 = CARTESIAN_POINT('',(1.038185945807E-02,-4.049717697005E-02,+ 1.1500001));+#10923 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,+ 1.1500001));+#10924 = PCURVE('',#10581,#10925);+#10925 = DEFINITIONAL_REPRESENTATION('',(#10926),#10930);+#10926 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10927,#10928,#10929),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10927 = CARTESIAN_POINT('',(2.056559182725E-02,6.696695604636E-03));+#10928 = CARTESIAN_POINT('',(1.038185945807E-02,1.569166544045E-02));+#10929 = CARTESIAN_POINT('',(1.038185945807E-02,3.162108338757E-02));+#10930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10931 = PCURVE('',#4089,#10932);+#10932 = DEFINITIONAL_REPRESENTATION('',(#10933),#10937);+#10933 = LINE('',#10934,#10935);+#10934 = CARTESIAN_POINT('',(0.,-0.1));+#10935 = VECTOR('',#10936,1.);+#10936 = DIRECTION('',(1.,0.));+#10937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10938 = ORIENTED_EDGE('',*,*,#10939,.T.);+#10939 = EDGE_CURVE('',#10917,#10543,#10940,.T.);+#10940 = SURFACE_CURVE('',#10941,(#10945,#10952),.PCURVE_S1.);+#10941 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10942,#10943,#10944),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10942 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,+ 1.1500001));+#10943 = CARTESIAN_POINT('',(1.038185945807E-02,-1.188762533367E-02,+ 1.1500001));+#10944 = CARTESIAN_POINT('',(1.668230088492E-02,-3.922916360112E-03,+ 1.1500001));+#10945 = PCURVE('',#10581,#10946);+#10946 = DEFINITIONAL_REPRESENTATION('',(#10947),#10951);+#10947 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10948,#10949,#10950),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10948 = CARTESIAN_POINT('',(1.038185945807E-02,3.162108338757E-02));+#10949 = CARTESIAN_POINT('',(1.038185945807E-02,4.430121707682E-02));+#10950 = CARTESIAN_POINT('',(1.668230088492E-02,5.226592605038E-02));+#10951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10952 = PCURVE('',#4125,#10953);+#10953 = DEFINITIONAL_REPRESENTATION('',(#10954),#10958);+#10954 = LINE('',#10955,#10956);+#10955 = CARTESIAN_POINT('',(0.,-0.1));+#10956 = VECTOR('',#10957,1.);+#10957 = DIRECTION('',(1.,0.));+#10958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10959 = ORIENTED_EDGE('',*,*,#10565,.T.);+#10960 = FACE_BOUND('',#10961,.F.);+#10961 = EDGE_LOOP('',(#10962,#10994,#11024,#11054,#11084,#11114,#11144,+ #11174));+#10962 = ORIENTED_EDGE('',*,*,#10963,.T.);+#10963 = EDGE_CURVE('',#10964,#10966,#10968,.T.);+#10964 = VERTEX_POINT('',#10965);+#10965 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.1500001));+#10966 = VERTEX_POINT('',#10967);+#10967 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,+ 1.1500001));+#10968 = SURFACE_CURVE('',#10969,(#10973,#10980),.PCURVE_S1.);+#10969 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10970,#10971,#10972),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10970 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.1500001));+#10971 = CARTESIAN_POINT('',(3.811965190331E-02,0.,1.1500001));+#10972 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,+ 1.1500001));+#10973 = PCURVE('',#10581,#10974);+#10974 = DEFINITIONAL_REPRESENTATION('',(#10975),#10979);+#10975 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10976,#10977,#10978),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10976 = CARTESIAN_POINT('',(4.881851470362E-02,5.618884241049E-02));+#10977 = CARTESIAN_POINT('',(3.811965190331E-02,5.618884241049E-02));+#10978 = CARTESIAN_POINT('',(3.229471548981E-02,5.020540432588E-02));+#10979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10980 = PCURVE('',#10981,#10988);+#10981 = SURFACE_OF_LINEAR_EXTRUSION('',#10982,#10986);+#10982 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10983,#10984,#10985),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10983 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.2500001));+#10984 = CARTESIAN_POINT('',(3.811965190331E-02,0.,1.2500001));+#10985 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,+ 1.2500001));+#10986 = VECTOR('',#10987,1.);+#10987 = DIRECTION('',(0.,0.,1.));+#10988 = DEFINITIONAL_REPRESENTATION('',(#10989),#10993);+#10989 = LINE('',#10990,#10991);+#10990 = CARTESIAN_POINT('',(0.,-0.1));+#10991 = VECTOR('',#10992,1.);+#10992 = DIRECTION('',(1.,0.));+#10993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10994 = ORIENTED_EDGE('',*,*,#10995,.T.);+#10995 = EDGE_CURVE('',#10966,#10996,#10998,.T.);+#10996 = VERTEX_POINT('',#10997);+#10997 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,+ 1.1500001));+#10998 = SURFACE_CURVE('',#10999,(#11003,#11010),.PCURVE_S1.);+#10999 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11000,#11001,#11002),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11000 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,+ 1.1500001));+#11001 = CARTESIAN_POINT('',(2.646977907631E-02,-1.196687616923E-02,+ 1.1500001));+#11002 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,+ 1.1500001));+#11003 = PCURVE('',#10581,#11004);+#11004 = DEFINITIONAL_REPRESENTATION('',(#11005),#11009);+#11005 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11006,#11007,#11008),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11006 = CARTESIAN_POINT('',(3.229471548981E-02,5.020540432588E-02));+#11007 = CARTESIAN_POINT('',(2.646977907631E-02,4.422196624126E-02));+#11008 = CARTESIAN_POINT('',(2.646977907631E-02,3.328535093428E-02));+#11009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11010 = PCURVE('',#11011,#11018);+#11011 = SURFACE_OF_LINEAR_EXTRUSION('',#11012,#11016);+#11012 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11013,#11014,#11015),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11013 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,+ 1.2500001));+#11014 = CARTESIAN_POINT('',(2.646977907631E-02,-1.196687616923E-02,+ 1.2500001));+#11015 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,+ 1.2500001));+#11016 = VECTOR('',#11017,1.);+#11017 = DIRECTION('',(0.,0.,1.));+#11018 = DEFINITIONAL_REPRESENTATION('',(#11019),#11023);+#11019 = LINE('',#11020,#11021);+#11020 = CARTESIAN_POINT('',(0.,-0.1));+#11021 = VECTOR('',#11022,1.);+#11022 = DIRECTION('',(1.,0.));+#11023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11024 = ORIENTED_EDGE('',*,*,#11025,.T.);+#11025 = EDGE_CURVE('',#10996,#11026,#11028,.T.);+#11026 = VERTEX_POINT('',#11027);+#11027 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,+ 1.1500001));+#11028 = SURFACE_CURVE('',#11029,(#11033,#11040),.PCURVE_S1.);+#11029 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11030,#11031,#11032),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11030 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,+ 1.1500001));+#11031 = CARTESIAN_POINT('',(2.646977907631E-02,-3.384010678319E-02,+ 1.1500001));+#11032 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,+ 1.1500001));+#11033 = PCURVE('',#10581,#11034);+#11034 = DEFINITIONAL_REPRESENTATION('',(#11035),#11039);+#11035 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11036,#11037,#11038),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11036 = CARTESIAN_POINT('',(2.646977907631E-02,3.328535093428E-02));+#11037 = CARTESIAN_POINT('',(2.646977907631E-02,2.234873562731E-02));+#11038 = CARTESIAN_POINT('',(3.237396632537E-02,1.628604670713E-02));+#11039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11040 = PCURVE('',#11041,#11048);+#11041 = SURFACE_OF_LINEAR_EXTRUSION('',#11042,#11046);+#11042 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11043,#11044,#11045),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11043 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,+ 1.2500001));+#11044 = CARTESIAN_POINT('',(2.646977907631E-02,-3.384010678319E-02,+ 1.2500001));+#11045 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,+ 1.2500001));+#11046 = VECTOR('',#11047,1.);+#11047 = DIRECTION('',(0.,0.,1.));+#11048 = DEFINITIONAL_REPRESENTATION('',(#11049),#11053);+#11049 = LINE('',#11050,#11051);+#11050 = CARTESIAN_POINT('',(0.,-0.1));+#11051 = VECTOR('',#11052,1.);+#11052 = DIRECTION('',(1.,0.));+#11053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11054 = ORIENTED_EDGE('',*,*,#11055,.T.);+#11055 = EDGE_CURVE('',#11026,#11056,#11058,.T.);+#11056 = VERTEX_POINT('',#11057);+#11057 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,+ 1.1500001));+#11058 = SURFACE_CURVE('',#11059,(#11063,#11070),.PCURVE_S1.);+#11059 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11060,#11061,#11062),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11060 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,+ 1.1500001));+#11061 = CARTESIAN_POINT('',(3.827815357443E-02,-4.596548462354E-02,+ 1.1500001));+#11062 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,+ 1.1500001));+#11063 = PCURVE('',#10581,#11064);+#11064 = DEFINITIONAL_REPRESENTATION('',(#11065),#11069);+#11065 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11066,#11067,#11068),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11066 = CARTESIAN_POINT('',(3.237396632537E-02,1.628604670713E-02));+#11067 = CARTESIAN_POINT('',(3.827815357443E-02,1.022335778696E-02));+#11068 = CARTESIAN_POINT('',(4.881851470362E-02,1.022335778696E-02));+#11069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11070 = PCURVE('',#11071,#11078);+#11071 = SURFACE_OF_LINEAR_EXTRUSION('',#11072,#11076);+#11072 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11073,#11074,#11075),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11073 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,+ 1.2500001));+#11074 = CARTESIAN_POINT('',(3.827815357443E-02,-4.596548462354E-02,+ 1.2500001));+#11075 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,+ 1.2500001));+#11076 = VECTOR('',#11077,1.);+#11077 = DIRECTION('',(0.,0.,1.));+#11078 = DEFINITIONAL_REPRESENTATION('',(#11079),#11083);+#11079 = LINE('',#11080,#11081);+#11080 = CARTESIAN_POINT('',(0.,-0.1));+#11081 = VECTOR('',#11082,1.);+#11082 = DIRECTION('',(1.,0.));+#11083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11084 = ORIENTED_EDGE('',*,*,#11085,.T.);+#11085 = EDGE_CURVE('',#11056,#11086,#11088,.T.);+#11086 = VERTEX_POINT('',#11087);+#11087 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,+ 1.1500001));+#11088 = SURFACE_CURVE('',#11089,(#11093,#11100),.PCURVE_S1.);+#11089 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11090,#11091,#11092),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11090 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,+ 1.1500001));+#11091 = CARTESIAN_POINT('',(5.959662833948E-02,-4.596548462354E-02,+ 1.1500001));+#11092 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,+ 1.1500001));+#11093 = PCURVE('',#10581,#11094);+#11094 = DEFINITIONAL_REPRESENTATION('',(#11095),#11099);+#11095 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11096,#11097,#11098),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11096 = CARTESIAN_POINT('',(4.881851470362E-02,1.022335778696E-02));+#11097 = CARTESIAN_POINT('',(5.959662833948E-02,1.022335778696E-02));+#11098 = CARTESIAN_POINT('',(6.542156475298E-02,1.620679587157E-02));+#11099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11100 = PCURVE('',#11101,#11108);+#11101 = SURFACE_OF_LINEAR_EXTRUSION('',#11102,#11106);+#11102 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11103,#11104,#11105),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11103 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,+ 1.2500001));+#11104 = CARTESIAN_POINT('',(5.959662833948E-02,-4.596548462354E-02,+ 1.2500001));+#11105 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,+ 1.2500001));+#11106 = VECTOR('',#11107,1.);+#11107 = DIRECTION('',(0.,0.,1.));+#11108 = DEFINITIONAL_REPRESENTATION('',(#11109),#11113);+#11109 = LINE('',#11110,#11111);+#11110 = CARTESIAN_POINT('',(0.,-0.1));+#11111 = VECTOR('',#11112,1.);+#11112 = DIRECTION('',(1.,0.));+#11113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11114 = ORIENTED_EDGE('',*,*,#11115,.T.);+#11115 = EDGE_CURVE('',#11086,#11116,#11118,.T.);+#11116 = VERTEX_POINT('',#11117);+#11117 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,+ 1.1500001));+#11118 = SURFACE_CURVE('',#11119,(#11123,#11130),.PCURVE_S1.);+#11119 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11120,#11121,#11122),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11120 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,+ 1.1500001));+#11121 = CARTESIAN_POINT('',(7.124650116648E-02,-3.399860845431E-02,+ 1.1500001));+#11122 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,+ 1.1500001));+#11123 = PCURVE('',#10581,#11124);+#11124 = DEFINITIONAL_REPRESENTATION('',(#11125),#11129);+#11125 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11126,#11127,#11128),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11126 = CARTESIAN_POINT('',(6.542156475298E-02,1.620679587157E-02));+#11127 = CARTESIAN_POINT('',(7.124650116648E-02,2.219023395619E-02));+#11128 = CARTESIAN_POINT('',(7.124650116648E-02,3.328535093428E-02));+#11129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11130 = PCURVE('',#11131,#11138);+#11131 = SURFACE_OF_LINEAR_EXTRUSION('',#11132,#11136);+#11132 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11133,#11134,#11135),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11133 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,+ 1.2500001));+#11134 = CARTESIAN_POINT('',(7.124650116648E-02,-3.399860845431E-02,+ 1.2500001));+#11135 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,+ 1.2500001));+#11136 = VECTOR('',#11137,1.);+#11137 = DIRECTION('',(0.,0.,1.));+#11138 = DEFINITIONAL_REPRESENTATION('',(#11139),#11143);+#11139 = LINE('',#11140,#11141);+#11140 = CARTESIAN_POINT('',(0.,-0.1));+#11141 = VECTOR('',#11142,1.);+#11142 = DIRECTION('',(1.,0.));+#11143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11144 = ORIENTED_EDGE('',*,*,#11145,.T.);+#11145 = EDGE_CURVE('',#11116,#11146,#11148,.T.);+#11146 = VERTEX_POINT('',#11147);+#11147 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,+ 1.1500001));+#11148 = SURFACE_CURVE('',#11149,(#11153,#11160),.PCURVE_S1.);+#11149 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11150,#11151,#11152),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11150 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,+ 1.1500001));+#11151 = CARTESIAN_POINT('',(7.124650116648E-02,-1.204612700479E-02,+ 1.1500001));+#11152 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,+ 1.1500001));+#11153 = PCURVE('',#10581,#11154);+#11154 = DEFINITIONAL_REPRESENTATION('',(#11155),#11159);+#11155 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11156,#11157,#11158),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11156 = CARTESIAN_POINT('',(7.124650116648E-02,3.328535093428E-02));+#11157 = CARTESIAN_POINT('',(7.124650116648E-02,4.414271540571E-02));+#11158 = CARTESIAN_POINT('',(6.534231391742E-02,5.01657789081E-02));+#11159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11160 = PCURVE('',#11161,#11168);+#11161 = SURFACE_OF_LINEAR_EXTRUSION('',#11162,#11166);+#11162 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11163,#11164,#11165),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11163 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,+ 1.2500001));+#11164 = CARTESIAN_POINT('',(7.124650116648E-02,-1.204612700479E-02,+ 1.2500001));+#11165 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,+ 1.2500001));+#11166 = VECTOR('',#11167,1.);+#11167 = DIRECTION('',(0.,0.,1.));+#11168 = DEFINITIONAL_REPRESENTATION('',(#11169),#11173);+#11169 = LINE('',#11170,#11171);+#11170 = CARTESIAN_POINT('',(0.,-0.1));+#11171 = VECTOR('',#11172,1.);+#11172 = DIRECTION('',(1.,0.));+#11173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11174 = ORIENTED_EDGE('',*,*,#11175,.T.);+#11175 = EDGE_CURVE('',#11146,#10964,#11176,.T.);+#11176 = SURFACE_CURVE('',#11177,(#11181,#11188),.PCURVE_S1.);+#11177 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11178,#11179,#11180),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11178 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,+ 1.1500001));+#11179 = CARTESIAN_POINT('',(5.943812666837E-02,0.,1.1500001));+#11180 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.1500001));+#11181 = PCURVE('',#10581,#11182);+#11182 = DEFINITIONAL_REPRESENTATION('',(#11183),#11187);+#11183 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11184,#11185,#11186),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11184 = CARTESIAN_POINT('',(6.534231391742E-02,5.01657789081E-02));+#11185 = CARTESIAN_POINT('',(5.943812666837E-02,5.618884241049E-02));+#11186 = CARTESIAN_POINT('',(4.881851470362E-02,5.618884241049E-02));+#11187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11188 = PCURVE('',#11189,#11196);+#11189 = SURFACE_OF_LINEAR_EXTRUSION('',#11190,#11194);+#11190 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11191,#11192,#11193),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11191 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,+ 1.2500001));+#11192 = CARTESIAN_POINT('',(5.943812666837E-02,0.,1.2500001));+#11193 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.2500001));+#11194 = VECTOR('',#11195,1.);+#11195 = DIRECTION('',(0.,0.,1.));+#11196 = DEFINITIONAL_REPRESENTATION('',(#11197),#11201);+#11197 = LINE('',#11198,#11199);+#11198 = CARTESIAN_POINT('',(0.,-0.1));+#11199 = VECTOR('',#11200,1.);+#11200 = DIRECTION('',(1.,0.));+#11201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11202 = FACE_BOUND('',#11203,.F.);+#11203 = EDGE_LOOP('',(#11204,#11236,#11266,#11296,#11326,#11356,#11386,+ #11416));+#11204 = ORIENTED_EDGE('',*,*,#11205,.T.);+#11205 = EDGE_CURVE('',#11206,#11208,#11210,.T.);+#11206 = VERTEX_POINT('',#11207);+#11207 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,+ 1.1500001));+#11208 = VERTEX_POINT('',#11209);+#11209 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,+ 1.1500001));+#11210 = SURFACE_CURVE('',#11211,(#11215,#11222),.PCURVE_S1.);+#11211 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11212,#11213,#11214),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11212 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,+ 1.1500001));+#11213 = CARTESIAN_POINT('',(2.908505664972E-02,2.258648813398E-02,+ 1.1500001));+#11214 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,+ 1.1500001));+#11215 = PCURVE('',#10581,#11216);+#11216 = DEFINITIONAL_REPRESENTATION('',(#11217),#11221);+#11217 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11218,#11219,#11220),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11218 = CARTESIAN_POINT('',(2.908505664972E-02,8.828543081141E-02));+#11219 = CARTESIAN_POINT('',(2.908505664972E-02,7.877533054447E-02));+#11220 = CARTESIAN_POINT('',(3.415711012542E-02,7.378252790433E-02));+#11221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11222 = PCURVE('',#11223,#11230);+#11223 = SURFACE_OF_LINEAR_EXTRUSION('',#11224,#11228);+#11224 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11225,#11226,#11227),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11225 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,+ 1.2500001));+#11226 = CARTESIAN_POINT('',(2.908505664972E-02,2.258648813398E-02,+ 1.2500001));+#11227 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,+ 1.2500001));+#11228 = VECTOR('',#11229,1.);+#11229 = DIRECTION('',(0.,0.,1.));+#11230 = DEFINITIONAL_REPRESENTATION('',(#11231),#11235);+#11231 = LINE('',#11232,#11233);+#11232 = CARTESIAN_POINT('',(0.,-0.1));+#11233 = VECTOR('',#11234,1.);+#11234 = DIRECTION('',(1.,0.));+#11235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11236 = ORIENTED_EDGE('',*,*,#11237,.T.);+#11237 = EDGE_CURVE('',#11208,#11238,#11240,.T.);+#11238 = VERTEX_POINT('',#11239);+#11239 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,+ 1.1500001));+#11240 = SURFACE_CURVE('',#11241,(#11245,#11252),.PCURVE_S1.);+#11241 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11242,#11243,#11244),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11242 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,+ 1.1500001));+#11243 = CARTESIAN_POINT('',(3.922916360112E-02,1.260088285369E-02,+ 1.1500001));+#11244 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,+ 1.1500001));+#11245 = PCURVE('',#10581,#11246);+#11246 = DEFINITIONAL_REPRESENTATION('',(#11247),#11251);+#11247 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11248,#11249,#11250),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11248 = CARTESIAN_POINT('',(3.415711012542E-02,7.378252790433E-02));+#11249 = CARTESIAN_POINT('',(3.922916360112E-02,6.878972526419E-02));+#11250 = CARTESIAN_POINT('',(4.881851470362E-02,6.878972526419E-02));+#11251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11252 = PCURVE('',#11253,#11260);+#11253 = SURFACE_OF_LINEAR_EXTRUSION('',#11254,#11258);+#11254 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11255,#11256,#11257),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11255 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,+ 1.2500001));+#11256 = CARTESIAN_POINT('',(3.922916360112E-02,1.260088285369E-02,+ 1.2500001));+#11257 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,+ 1.2500001));+#11258 = VECTOR('',#11259,1.);+#11259 = DIRECTION('',(0.,0.,1.));+#11260 = DEFINITIONAL_REPRESENTATION('',(#11261),#11265);+#11261 = LINE('',#11262,#11263);+#11262 = CARTESIAN_POINT('',(0.,-0.1));+#11263 = VECTOR('',#11264,1.);+#11264 = DIRECTION('',(1.,0.));+#11265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11266 = ORIENTED_EDGE('',*,*,#11267,.T.);+#11267 = EDGE_CURVE('',#11238,#11268,#11270,.T.);+#11268 = VERTEX_POINT('',#11269);+#11269 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,+ 1.1500001));+#11270 = SURFACE_CURVE('',#11271,(#11275,#11282),.PCURVE_S1.);+#11271 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11272,#11273,#11274),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11272 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,+ 1.1500001));+#11273 = CARTESIAN_POINT('',(5.848711664167E-02,1.260088285369E-02,+ 1.1500001));+#11274 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,+ 1.1500001));+#11275 = PCURVE('',#10581,#11276);+#11276 = DEFINITIONAL_REPRESENTATION('',(#11277),#11281);+#11277 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11278,#11279,#11280),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11278 = CARTESIAN_POINT('',(4.881851470362E-02,6.878972526419E-02));+#11279 = CARTESIAN_POINT('',(5.848711664167E-02,6.878972526419E-02));+#11280 = CARTESIAN_POINT('',(6.355917011737E-02,7.378252790433E-02));+#11281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11282 = PCURVE('',#11283,#11290);+#11283 = SURFACE_OF_LINEAR_EXTRUSION('',#11284,#11288);+#11284 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11285,#11286,#11287),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11285 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,+ 1.2500001));+#11286 = CARTESIAN_POINT('',(5.848711664167E-02,1.260088285369E-02,+ 1.2500001));+#11287 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,+ 1.2500001));+#11288 = VECTOR('',#11289,1.);+#11289 = DIRECTION('',(0.,0.,1.));+#11290 = DEFINITIONAL_REPRESENTATION('',(#11291),#11295);+#11291 = LINE('',#11292,#11293);+#11292 = CARTESIAN_POINT('',(0.,-0.1));+#11293 = VECTOR('',#11294,1.);+#11294 = DIRECTION('',(1.,0.));+#11295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11296 = ORIENTED_EDGE('',*,*,#11297,.T.);+#11297 = EDGE_CURVE('',#11268,#11298,#11300,.T.);+#11298 = VERTEX_POINT('',#11299);+#11299 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,+ 1.1500001));+#11300 = SURFACE_CURVE('',#11301,(#11305,#11312),.PCURVE_S1.);+#11301 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11302,#11303,#11304),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11302 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,+ 1.1500001));+#11303 = CARTESIAN_POINT('',(6.863122359307E-02,2.258648813398E-02,+ 1.1500001));+#11304 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,+ 1.1500001));+#11305 = PCURVE('',#10581,#11306);+#11306 = DEFINITIONAL_REPRESENTATION('',(#11307),#11311);+#11307 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11308,#11309,#11310),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11308 = CARTESIAN_POINT('',(6.355917011737E-02,7.378252790433E-02));+#11309 = CARTESIAN_POINT('',(6.863122359307E-02,7.877533054447E-02));+#11310 = CARTESIAN_POINT('',(6.863122359307E-02,8.828543081141E-02));+#11311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11312 = PCURVE('',#11313,#11320);+#11313 = SURFACE_OF_LINEAR_EXTRUSION('',#11314,#11318);+#11314 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11315,#11316,#11317),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11315 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,+ 1.2500001));+#11316 = CARTESIAN_POINT('',(6.863122359307E-02,2.258648813398E-02,+ 1.2500001));+#11317 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,+ 1.2500001));+#11318 = VECTOR('',#11319,1.);+#11319 = DIRECTION('',(0.,0.,1.));+#11320 = DEFINITIONAL_REPRESENTATION('',(#11321),#11325);+#11321 = LINE('',#11322,#11323);+#11322 = CARTESIAN_POINT('',(0.,-0.1));+#11323 = VECTOR('',#11324,1.);+#11324 = DIRECTION('',(1.,0.));+#11325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11326 = ORIENTED_EDGE('',*,*,#11327,.T.);+#11327 = EDGE_CURVE('',#11298,#11328,#11330,.T.);+#11328 = VERTEX_POINT('',#11329);+#11329 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,+ 1.1500001));+#11330 = SURFACE_CURVE('',#11331,(#11335,#11342),.PCURVE_S1.);+#11331 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11332,#11333,#11334),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11332 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,+ 1.1500001));+#11333 = CARTESIAN_POINT('',(6.863122359307E-02,4.176519033897E-02,+ 1.1500001));+#11334 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,+ 1.1500001));+#11335 = PCURVE('',#10581,#11336);+#11336 = DEFINITIONAL_REPRESENTATION('',(#11337),#11341);+#11337 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11338,#11339,#11340),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11338 = CARTESIAN_POINT('',(6.863122359307E-02,8.828543081141E-02));+#11339 = CARTESIAN_POINT('',(6.863122359307E-02,9.795403274947E-02));+#11340 = CARTESIAN_POINT('',(6.359879553515E-02,0.103026086225));+#11341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11342 = PCURVE('',#11343,#11350);+#11343 = SURFACE_OF_LINEAR_EXTRUSION('',#11344,#11348);+#11344 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11345,#11346,#11347),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11345 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,+ 1.2500001));+#11346 = CARTESIAN_POINT('',(6.863122359307E-02,4.176519033897E-02,+ 1.2500001));+#11347 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,+ 1.2500001));+#11348 = VECTOR('',#11349,1.);+#11349 = DIRECTION('',(0.,0.,1.));+#11350 = DEFINITIONAL_REPRESENTATION('',(#11351),#11355);+#11351 = LINE('',#11352,#11353);+#11352 = CARTESIAN_POINT('',(0.,-0.1));+#11353 = VECTOR('',#11354,1.);+#11354 = DIRECTION('',(1.,0.));+#11355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11356 = ORIENTED_EDGE('',*,*,#11357,.T.);+#11357 = EDGE_CURVE('',#11328,#11358,#11360,.T.);+#11358 = VERTEX_POINT('',#11359);+#11359 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,+ 1.1500001));+#11360 = SURFACE_CURVE('',#11361,(#11365,#11372),.PCURVE_S1.);+#11361 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11362,#11363,#11364),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11362 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,+ 1.1500001));+#11363 = CARTESIAN_POINT('',(5.856636747723E-02,5.190929729037E-02,+ 1.1500001));+#11364 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,+ 1.1500001));+#11365 = PCURVE('',#10581,#11366);+#11366 = DEFINITIONAL_REPRESENTATION('',(#11367),#11371);+#11367 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11368,#11369,#11370),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11368 = CARTESIAN_POINT('',(6.359879553515E-02,0.103026086225));+#11369 = CARTESIAN_POINT('',(5.856636747723E-02,0.108098139701));+#11370 = CARTESIAN_POINT('',(4.881851470362E-02,0.108098139701));+#11371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11372 = PCURVE('',#11373,#11380);+#11373 = SURFACE_OF_LINEAR_EXTRUSION('',#11374,#11378);+#11374 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11375,#11376,#11377),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11375 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,+ 1.2500001));+#11376 = CARTESIAN_POINT('',(5.856636747723E-02,5.190929729037E-02,+ 1.2500001));+#11377 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,+ 1.2500001));+#11378 = VECTOR('',#11379,1.);+#11379 = DIRECTION('',(0.,0.,1.));+#11380 = DEFINITIONAL_REPRESENTATION('',(#11381),#11385);+#11381 = LINE('',#11382,#11383);+#11382 = CARTESIAN_POINT('',(0.,-0.1));+#11383 = VECTOR('',#11384,1.);+#11384 = DIRECTION('',(1.,0.));+#11385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11386 = ORIENTED_EDGE('',*,*,#11387,.T.);+#11387 = EDGE_CURVE('',#11358,#11388,#11390,.T.);+#11388 = VERTEX_POINT('',#11389);+#11389 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,+ 1.1500001));+#11390 = SURFACE_CURVE('',#11391,(#11395,#11402),.PCURVE_S1.);+#11391 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11392,#11393,#11394),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11392 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,+ 1.1500001));+#11393 = CARTESIAN_POINT('',(3.922916360112E-02,5.190929729037E-02,+ 1.1500001));+#11394 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,+ 1.1500001));+#11395 = PCURVE('',#10581,#11396);+#11396 = DEFINITIONAL_REPRESENTATION('',(#11397),#11401);+#11397 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11398,#11399,#11400),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11398 = CARTESIAN_POINT('',(4.881851470362E-02,0.108098139701));+#11399 = CARTESIAN_POINT('',(3.922916360112E-02,0.108098139701));+#11400 = CARTESIAN_POINT('',(3.415711012542E-02,0.102986460807));+#11401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11402 = PCURVE('',#11403,#11410);+#11403 = SURFACE_OF_LINEAR_EXTRUSION('',#11404,#11408);+#11404 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11405,#11406,#11407),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11405 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,+ 1.2500001));+#11406 = CARTESIAN_POINT('',(3.922916360112E-02,5.190929729037E-02,+ 1.2500001));+#11407 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,+ 1.2500001));+#11408 = VECTOR('',#11409,1.);+#11409 = DIRECTION('',(0.,0.,1.));+#11410 = DEFINITIONAL_REPRESENTATION('',(#11411),#11415);+#11411 = LINE('',#11412,#11413);+#11412 = CARTESIAN_POINT('',(0.,-0.1));+#11413 = VECTOR('',#11414,1.);+#11414 = DIRECTION('',(1.,0.));+#11415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11416 = ORIENTED_EDGE('',*,*,#11417,.T.);+#11417 = EDGE_CURVE('',#11388,#11206,#11418,.T.);+#11418 = SURFACE_CURVE('',#11419,(#11423,#11430),.PCURVE_S1.);+#11419 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11420,#11421,#11422),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11420 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,+ 1.1500001));+#11421 = CARTESIAN_POINT('',(2.908505664972E-02,4.168593950341E-02,+ 1.1500001));+#11422 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,+ 1.1500001));+#11423 = PCURVE('',#10581,#11424);+#11424 = DEFINITIONAL_REPRESENTATION('',(#11425),#11429);+#11425 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11426,#11427,#11428),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11426 = CARTESIAN_POINT('',(3.415711012542E-02,0.102986460807));+#11427 = CARTESIAN_POINT('',(2.908505664972E-02,9.787478191391E-02));+#11428 = CARTESIAN_POINT('',(2.908505664972E-02,8.828543081141E-02));+#11429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11430 = PCURVE('',#11431,#11438);+#11431 = SURFACE_OF_LINEAR_EXTRUSION('',#11432,#11436);+#11432 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11433,#11434,#11435),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11433 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,+ 1.2500001));+#11434 = CARTESIAN_POINT('',(2.908505664972E-02,4.168593950341E-02,+ 1.2500001));+#11435 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,+ 1.2500001));+#11436 = VECTOR('',#11437,1.);+#11437 = DIRECTION('',(0.,0.,1.));+#11438 = DEFINITIONAL_REPRESENTATION('',(#11439),#11443);+#11439 = LINE('',#11440,#11441);+#11440 = CARTESIAN_POINT('',(0.,-0.1));+#11441 = VECTOR('',#11442,1.);+#11442 = DIRECTION('',(1.,0.));+#11443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11444 = ADVANCED_FACE('',(#11445),#11431,.T.);+#11445 = FACE_BOUND('',#11446,.T.);+#11446 = EDGE_LOOP('',(#11447,#11483,#11504,#11505));+#11447 = ORIENTED_EDGE('',*,*,#11448,.T.);+#11448 = EDGE_CURVE('',#11449,#11451,#11453,.T.);+#11449 = VERTEX_POINT('',#11450);+#11450 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,1.2)+ );+#11451 = VERTEX_POINT('',#11452);+#11452 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,1.2)+ );+#11453 = SURFACE_CURVE('',#11454,(#11460,#11469),.PCURVE_S1.);+#11454 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11455,#11456,#11457,#11458,+ #11459),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11455 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,1.2)+ );+#11456 = CARTESIAN_POINT('',(2.908505664972E-02,3.689099861201E-02,1.2)+ );+#11457 = CARTESIAN_POINT('',(2.993030532678E-02,4.093948709988E-02,1.2)+ );+#11458 = CARTESIAN_POINT('',(3.162102040287E-02,4.424171547339E-02,1.2)+ );+#11459 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,1.2)+ );+#11460 = PCURVE('',#11431,#11461);+#11461 = DEFINITIONAL_REPRESENTATION('',(#11462),#11468);+#11462 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11463,#11464,#11465,#11466,+ #11467),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11463 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11464 = CARTESIAN_POINT('',(0.750013835146,-5.00001E-02));+#11465 = CARTESIAN_POINT('',(0.500013364085,-5.00001E-02));+#11466 = CARTESIAN_POINT('',(0.250006208994,-5.00001E-02));+#11467 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11469 = PCURVE('',#11470,#11475);+#11470 = PLANE('',#11471);+#11471 = AXIS2_PLACEMENT_3D('',#11472,#11473,#11474);+#11472 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#11473 = DIRECTION('',(0.,0.,1.));+#11474 = DIRECTION('',(0.43658423493,-0.899663384723,0.));+#11475 = DEFINITIONAL_REPRESENTATION('',(#11476),#11482);+#11476 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11477,#11478,#11479,#11480,+ #11481),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11477 = CARTESIAN_POINT('',(1.493545618032,4.017962500156E-02));+#11478 = CARTESIAN_POINT('',(1.489232262714,4.227278891551E-02));+#11479 = CARTESIAN_POINT('',(1.485959008105,4.480073445035E-02));+#11480 = CARTESIAN_POINT('',(1.483726253697,4.776350974632E-02));+#11481 = CARTESIAN_POINT('',(1.482534018213,5.116100373248E-02));+#11482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11483 = ORIENTED_EDGE('',*,*,#11484,.T.);+#11484 = EDGE_CURVE('',#11451,#11388,#11485,.T.);+#11485 = SURFACE_CURVE('',#11486,(#11490,#11497),.PCURVE_S1.);+#11486 = LINE('',#11487,#11488);+#11487 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,+ 1.2500001));+#11488 = VECTOR('',#11489,1.);+#11489 = DIRECTION('',(-0.,-0.,-1.));+#11490 = PCURVE('',#11431,#11491);+#11491 = DEFINITIONAL_REPRESENTATION('',(#11492),#11496);+#11492 = LINE('',#11493,#11494);+#11493 = CARTESIAN_POINT('',(0.,0.));+#11494 = VECTOR('',#11495,1.);+#11495 = DIRECTION('',(0.,-1.));+#11496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11497 = PCURVE('',#11403,#11498);+#11498 = DEFINITIONAL_REPRESENTATION('',(#11499),#11503);+#11499 = LINE('',#11500,#11501);+#11500 = CARTESIAN_POINT('',(1.,0.));+#11501 = VECTOR('',#11502,1.);+#11502 = DIRECTION('',(0.,-1.));+#11503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11504 = ORIENTED_EDGE('',*,*,#11417,.T.);+#11505 = ORIENTED_EDGE('',*,*,#11506,.F.);+#11506 = EDGE_CURVE('',#11449,#11206,#11507,.T.);+#11507 = SURFACE_CURVE('',#11508,(#11512,#11519),.PCURVE_S1.);+#11508 = LINE('',#11509,#11510);+#11509 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,+ 1.2500001));+#11510 = VECTOR('',#11511,1.);+#11511 = DIRECTION('',(-0.,-0.,-1.));+#11512 = PCURVE('',#11431,#11513);+#11513 = DEFINITIONAL_REPRESENTATION('',(#11514),#11518);+#11514 = LINE('',#11515,#11516);+#11515 = CARTESIAN_POINT('',(1.,0.));+#11516 = VECTOR('',#11517,1.);+#11517 = DIRECTION('',(0.,-1.));+#11518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11519 = PCURVE('',#11223,#11520);+#11520 = DEFINITIONAL_REPRESENTATION('',(#11521),#11525);+#11521 = LINE('',#11522,#11523);+#11522 = CARTESIAN_POINT('',(0.,0.));+#11523 = VECTOR('',#11524,1.);+#11524 = DIRECTION('',(0.,-1.));+#11525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11526 = ADVANCED_FACE('',(#11527),#11470,.T.);+#11527 = FACE_BOUND('',#11528,.T.);+#11528 = EDGE_LOOP('',(#11529,#11558,#11587,#11616,#11645,#11674,#11703,+ #11730));+#11529 = ORIENTED_EDGE('',*,*,#11530,.F.);+#11530 = EDGE_CURVE('',#11531,#11449,#11533,.T.);+#11531 = VERTEX_POINT('',#11532);+#11532 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,1.2)+ );+#11533 = SURFACE_CURVE('',#11534,(#11540,#11549),.PCURVE_S1.);+#11534 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11535,#11536,#11537,#11538,+ #11539),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11535 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,1.2)+ );+#11536 = CARTESIAN_POINT('',(3.162102149581E-02,2.009014773861E-02,1.2)+ );+#11537 = CARTESIAN_POINT('',(2.99303056536E-02,2.333954023625E-02,1.2));+#11538 = CARTESIAN_POINT('',(2.908505664972E-02,2.734180049606E-02,1.2)+ );+#11539 = CARTESIAN_POINT('',(2.908505664972E-02,3.209658840092E-02,1.2)+ );+#11540 = PCURVE('',#11470,#11541);+#11541 = DEFINITIONAL_REPRESENTATION('',(#11542),#11548);+#11542 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11543,#11544,#11545,#11546,+ #11547),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11543 = CARTESIAN_POINT('',(1.508807727336,3.841102702904E-02));+#11544 = CARTESIAN_POINT('',(1.505454535349,3.721931700774E-02));+#11545 = CARTESIAN_POINT('',(1.501793036014,3.71168754081E-02));+#11546 = CARTESIAN_POINT('',(1.497823326612,3.810375956186E-02));+#11547 = CARTESIAN_POINT('',(1.493545618032,4.017962500156E-02));+#11548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11549 = PCURVE('',#11223,#11550);+#11550 = DEFINITIONAL_REPRESENTATION('',(#11551),#11557);+#11551 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11552,#11553,#11554,#11555,+ #11556),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11552 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11553 = CARTESIAN_POINT('',(0.749993898748,-5.00001E-02));+#11554 = CARTESIAN_POINT('',(0.499986739982,-5.00001E-02));+#11555 = CARTESIAN_POINT('',(0.249986213152,-5.00001E-02));+#11556 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11558 = ORIENTED_EDGE('',*,*,#11559,.F.);+#11559 = EDGE_CURVE('',#11560,#11531,#11562,.T.);+#11560 = VERTEX_POINT('',#11561);+#11561 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,1.2)+ );+#11562 = SURFACE_CURVE('',#11563,(#11569,#11578),.PCURVE_S1.);+#11563 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11564,#11565,#11566,#11567,+ #11568),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11564 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,1.2)+ );+#11565 = CARTESIAN_POINT('',(4.402410954515E-02,1.260088285369E-02,1.2)+ );+#11566 = CARTESIAN_POINT('',(3.998222560105E-02,1.343292276633E-02,1.2)+ );+#11567 = CARTESIAN_POINT('',(3.669320326668E-02,1.509721880791E-02,1.2)+ );+#11568 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,1.2)+ );+#11569 = PCURVE('',#11470,#11570);+#11570 = DEFINITIONAL_REPRESENTATION('',(#11571),#11577);+#11571 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11572,#11573,#11574,#11575,+ #11576),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11572 = CARTESIAN_POINT('',(1.519700507159,4.942157697585E-02));+#11573 = CARTESIAN_POINT('',(1.517607345451,4.510822620325E-02));+#11574 = CARTESIAN_POINT('',(1.515094166798,4.183514672213E-02));+#11575 = CARTESIAN_POINT('',(1.512160925288,3.960273917038E-02));+#11576 = CARTESIAN_POINT('',(1.508807727336,3.841102702904E-02));+#11577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11578 = PCURVE('',#11253,#11579);+#11579 = DEFINITIONAL_REPRESENTATION('',(#11580),#11586);+#11580 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11581,#11582,#11583,#11584,+ #11585),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11581 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11582 = CARTESIAN_POINT('',(0.750014098596,-5.00001E-02));+#11583 = CARTESIAN_POINT('',(0.500013764421,-5.00001E-02));+#11584 = CARTESIAN_POINT('',(0.250006546008,-5.00001E-02));+#11585 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11587 = ORIENTED_EDGE('',*,*,#11588,.F.);+#11588 = EDGE_CURVE('',#11589,#11560,#11591,.T.);+#11589 = VERTEX_POINT('',#11590);+#11590 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,1.2)+ );+#11591 = SURFACE_CURVE('',#11592,(#11598,#11607),.PCURVE_S1.);+#11592 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11593,#11594,#11595,#11596,+ #11597),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11593 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,1.2)+ );+#11594 = CARTESIAN_POINT('',(6.102307371682E-02,1.509721559954E-02,1.2)+ );+#11595 = CARTESIAN_POINT('',(5.772083834878E-02,1.34329198269E-02,1.2));+#11596 = CARTESIAN_POINT('',(5.365253450698E-02,1.260088285369E-02,1.2)+ );+#11597 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,1.2)+ );+#11598 = PCURVE('',#11470,#11599);+#11599 = DEFINITIONAL_REPRESENTATION('',(#11600),#11606);+#11600 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11601,#11602,#11603,#11604,+ #11605),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11601 = CARTESIAN_POINT('',(1.521644203203,6.486298383922E-02));+#11602 = CARTESIAN_POINT('',(1.522782966051,6.149143136869E-02));+#11603 = CARTESIAN_POINT('',(1.522838568117,5.779392582373E-02));+#11604 = CARTESIAN_POINT('',(1.521810963997,5.377056759395E-02));+#11605 = CARTESIAN_POINT('',(1.519700507159,4.942157697585E-02));+#11606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11607 = PCURVE('',#11283,#11608);+#11608 = DEFINITIONAL_REPRESENTATION('',(#11609),#11615);+#11609 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11610,#11611,#11612,#11613,+ #11614),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11610 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11611 = CARTESIAN_POINT('',(0.749993132692,-5.00001E-02));+#11612 = CARTESIAN_POINT('',(0.49998572699,-5.00001E-02));+#11613 = CARTESIAN_POINT('',(0.249985459859,-5.00001E-02));+#11614 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11616 = ORIENTED_EDGE('',*,*,#11617,.F.);+#11617 = EDGE_CURVE('',#11618,#11589,#11620,.T.);+#11618 = VERTEX_POINT('',#11619);+#11619 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,1.2)+ );+#11620 = SURFACE_CURVE('',#11621,(#11627,#11636),.PCURVE_S1.);+#11621 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11622,#11623,#11624,#11625,+ #11626),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11622 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,1.2)+ );+#11623 = CARTESIAN_POINT('',(6.863122359307E-02,2.734180049573E-02,1.2)+ );+#11624 = CARTESIAN_POINT('',(6.778597458926E-02,2.33395402364E-02,1.2));+#11625 = CARTESIAN_POINT('',(6.609525874678E-02,2.009014773841E-02,1.2)+ );+#11626 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,1.2)+ );+#11627 = PCURVE('',#11470,#11628);+#11628 = DEFINITIONAL_REPRESENTATION('',(#11629),#11635);+#11629 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11630,#11631,#11632,#11633,+ #11634),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11630 = CARTESIAN_POINT('',(1.510810851071,7.575786340661E-02));+#11631 = CARTESIAN_POINT('',(1.515088559652,7.368199796677E-02));+#11632 = CARTESIAN_POINT('',(1.518320224274,7.117423465375E-02));+#11633 = CARTESIAN_POINT('',(1.520505443844,6.823452597858E-02));+#11634 = CARTESIAN_POINT('',(1.521644203203,6.486298383922E-02));+#11635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11636 = PCURVE('',#11313,#11637);+#11637 = DEFINITIONAL_REPRESENTATION('',(#11638),#11644);+#11638 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11639,#11640,#11641,#11642,+ #11643),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11639 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11640 = CARTESIAN_POINT('',(0.750013786831,-5.00001E-02));+#11641 = CARTESIAN_POINT('',(0.500013260028,-5.00001E-02));+#11642 = CARTESIAN_POINT('',(0.250006101232,-5.00001E-02));+#11643 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11645 = ORIENTED_EDGE('',*,*,#11646,.F.);+#11646 = EDGE_CURVE('',#11647,#11618,#11649,.T.);+#11647 = VERTEX_POINT('',#11648);+#11648 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,1.2)+ );+#11649 = SURFACE_CURVE('',#11650,(#11656,#11665),.PCURVE_S1.);+#11650 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11651,#11652,#11653,#11654,+ #11655),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11651 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,1.2)+ );+#11652 = CARTESIAN_POINT('',(6.611507735005E-02,4.430114875714E-02,1.2)+ );+#11653 = CARTESIAN_POINT('',(6.779258270772E-02,4.099891420052E-02,1.2)+ );+#11654 = CARTESIAN_POINT('',(6.863122359307E-02,3.693060948417E-02,1.2)+ );+#11655 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,1.2)+ );+#11656 = PCURVE('',#11470,#11657);+#11657 = DEFINITIONAL_REPRESENTATION('',(#11658),#11664);+#11658 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11659,#11660,#11661,#11662,+ #11663),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11659 = CARTESIAN_POINT('',(1.495352144375,7.766590991284E-02));+#11660 = CARTESIAN_POINT('',(1.49873234521,7.882249740694E-02));+#11661 = CARTESIAN_POINT('',(1.502435617121,7.888998400745E-02));+#11662 = CARTESIAN_POINT('',(1.506461859302,7.786832080288E-02));+#11663 = CARTESIAN_POINT('',(1.510810851071,7.575786340661E-02));+#11664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11665 = PCURVE('',#11343,#11666);+#11666 = DEFINITIONAL_REPRESENTATION('',(#11667),#11673);+#11667 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11668,#11669,#11670,#11671,+ #11672),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11668 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11669 = CARTESIAN_POINT('',(0.749993265087,-5.00001E-02));+#11670 = CARTESIAN_POINT('',(0.499985859382,-5.00001E-02));+#11671 = CARTESIAN_POINT('',(0.249985526047,-5.00001E-02));+#11672 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11674 = ORIENTED_EDGE('',*,*,#11675,.F.);+#11675 = EDGE_CURVE('',#11676,#11647,#11678,.T.);+#11676 = VERTEX_POINT('',#11677);+#11677 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,1.2)+ );+#11678 = SURFACE_CURVE('',#11679,(#11685,#11694),.PCURVE_S1.);+#11679 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11680,#11681,#11682,#11683,+ #11684),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11680 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,1.2)+ );+#11681 = CARTESIAN_POINT('',(5.369214896689E-02,5.190929729037E-02,1.2)+ );+#11682 = CARTESIAN_POINT('',(5.778027189231E-02,5.106405638329E-02,1.2)+ );+#11683 = CARTESIAN_POINT('',(6.108251111346E-02,4.937334149952E-02,1.2)+ );+#11684 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,1.2)+ );+#11685 = PCURVE('',#11470,#11686);+#11686 = DEFINITIONAL_REPRESENTATION('',(#11687),#11693);+#11687 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11688,#11689,#11690,#11691,+ #11692),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11688 = CARTESIAN_POINT('',(1.484336165979,6.6583011019E-02));+#11689 = CARTESIAN_POINT('',(1.486463917865,7.09676413162E-02));+#11690 = CARTESIAN_POINT('',(1.48900916018,7.42765569697E-02));+#11691 = CARTESIAN_POINT('',(1.491971940039,7.650932122055E-02));+#11692 = CARTESIAN_POINT('',(1.495352144375,7.766590991284E-02));+#11693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11694 = PCURVE('',#11373,#11695);+#11695 = DEFINITIONAL_REPRESENTATION('',(#11696),#11702);+#11696 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11697,#11698,#11699,#11700,+ #11701),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11697 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11698 = CARTESIAN_POINT('',(0.750014983994,-5.00001E-02));+#11699 = CARTESIAN_POINT('',(0.500014653438,-5.00001E-02));+#11700 = CARTESIAN_POINT('',(0.250006993913,-5.00001E-02));+#11701 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11703 = ORIENTED_EDGE('',*,*,#11704,.F.);+#11704 = EDGE_CURVE('',#11451,#11676,#11705,.T.);+#11705 = SURFACE_CURVE('',#11706,(#11712,#11721),.PCURVE_S1.);+#11706 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11707,#11708,#11709,#11710,+ #11711),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11707 = CARTESIAN_POINT('',(3.415711012542E-02,4.679761839689E-02,1.2)+ );+#11708 = CARTESIAN_POINT('',(3.669319920587E-02,4.935352067329E-02,1.2)+ );+#11709 = CARTESIAN_POINT('',(3.998221912877E-02,5.105744553955E-02,1.2)+ );+#11710 = CARTESIAN_POINT('',(4.402410570688E-02,5.190929729037E-02,1.2)+ );+#11711 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,1.2)+ );+#11712 = PCURVE('',#11470,#11713);+#11713 = DEFINITIONAL_REPRESENTATION('',(#11714),#11720);+#11714 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11715,#11716,#11717,#11718,+ #11719),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11715 = CARTESIAN_POINT('',(1.482534018213,5.116100373248E-02));+#11716 = CARTESIAN_POINT('',(1.481341783031,5.455849685845E-02));+#11717 = CARTESIAN_POINT('',(1.481244758465,5.826141438882E-02));+#11718 = CARTESIAN_POINT('',(1.482243002595,6.226965679325E-02));+#11719 = CARTESIAN_POINT('',(1.484336165979,6.6583011019E-02));+#11720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11721 = PCURVE('',#11403,#11722);+#11722 = DEFINITIONAL_REPRESENTATION('',(#11723),#11729);+#11723 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11724,#11725,#11726,#11727,+ #11728),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11724 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11725 = CARTESIAN_POINT('',(0.749993854304,-5.00001E-02));+#11726 = CARTESIAN_POINT('',(0.499986635905,-5.00001E-02));+#11727 = CARTESIAN_POINT('',(0.249986101536,-5.00001E-02));+#11728 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11730 = ORIENTED_EDGE('',*,*,#11448,.F.);+#11731 = ADVANCED_FACE('',(#11732),#11403,.T.);+#11732 = FACE_BOUND('',#11733,.T.);+#11733 = EDGE_LOOP('',(#11734,#11735,#11756,#11757));+#11734 = ORIENTED_EDGE('',*,*,#11704,.T.);+#11735 = ORIENTED_EDGE('',*,*,#11736,.T.);+#11736 = EDGE_CURVE('',#11676,#11358,#11737,.T.);+#11737 = SURFACE_CURVE('',#11738,(#11742,#11749),.PCURVE_S1.);+#11738 = LINE('',#11739,#11740);+#11739 = CARTESIAN_POINT('',(4.881851470362E-02,5.190929729037E-02,+ 1.2500001));+#11740 = VECTOR('',#11741,1.);+#11741 = DIRECTION('',(-0.,-0.,-1.));+#11742 = PCURVE('',#11403,#11743);+#11743 = DEFINITIONAL_REPRESENTATION('',(#11744),#11748);+#11744 = LINE('',#11745,#11746);+#11745 = CARTESIAN_POINT('',(0.,0.));+#11746 = VECTOR('',#11747,1.);+#11747 = DIRECTION('',(0.,-1.));+#11748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11749 = PCURVE('',#11373,#11750);+#11750 = DEFINITIONAL_REPRESENTATION('',(#11751),#11755);+#11751 = LINE('',#11752,#11753);+#11752 = CARTESIAN_POINT('',(1.,0.));+#11753 = VECTOR('',#11754,1.);+#11754 = DIRECTION('',(0.,-1.));+#11755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11756 = ORIENTED_EDGE('',*,*,#11387,.T.);+#11757 = ORIENTED_EDGE('',*,*,#11484,.F.);+#11758 = ADVANCED_FACE('',(#11759),#11373,.T.);+#11759 = FACE_BOUND('',#11760,.T.);+#11760 = EDGE_LOOP('',(#11761,#11762,#11783,#11784));+#11761 = ORIENTED_EDGE('',*,*,#11675,.T.);+#11762 = ORIENTED_EDGE('',*,*,#11763,.T.);+#11763 = EDGE_CURVE('',#11647,#11328,#11764,.T.);+#11764 = SURFACE_CURVE('',#11765,(#11769,#11776),.PCURVE_S1.);+#11765 = LINE('',#11766,#11767);+#11766 = CARTESIAN_POINT('',(6.359879553515E-02,4.683724381467E-02,+ 1.2500001));+#11767 = VECTOR('',#11768,1.);+#11768 = DIRECTION('',(-0.,-0.,-1.));+#11769 = PCURVE('',#11373,#11770);+#11770 = DEFINITIONAL_REPRESENTATION('',(#11771),#11775);+#11771 = LINE('',#11772,#11773);+#11772 = CARTESIAN_POINT('',(0.,0.));+#11773 = VECTOR('',#11774,1.);+#11774 = DIRECTION('',(0.,-1.));+#11775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11776 = PCURVE('',#11343,#11777);+#11777 = DEFINITIONAL_REPRESENTATION('',(#11778),#11782);+#11778 = LINE('',#11779,#11780);+#11779 = CARTESIAN_POINT('',(1.,0.));+#11780 = VECTOR('',#11781,1.);+#11781 = DIRECTION('',(0.,-1.));+#11782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11783 = ORIENTED_EDGE('',*,*,#11357,.T.);+#11784 = ORIENTED_EDGE('',*,*,#11736,.F.);+#11785 = ADVANCED_FACE('',(#11786),#11343,.T.);+#11786 = FACE_BOUND('',#11787,.T.);+#11787 = EDGE_LOOP('',(#11788,#11789,#11810,#11811));+#11788 = ORIENTED_EDGE('',*,*,#11646,.T.);+#11789 = ORIENTED_EDGE('',*,*,#11790,.T.);+#11790 = EDGE_CURVE('',#11618,#11298,#11791,.T.);+#11791 = SURFACE_CURVE('',#11792,(#11796,#11803),.PCURVE_S1.);+#11792 = LINE('',#11793,#11794);+#11793 = CARTESIAN_POINT('',(6.863122359307E-02,3.209658840092E-02,+ 1.2500001));+#11794 = VECTOR('',#11795,1.);+#11795 = DIRECTION('',(-0.,-0.,-1.));+#11796 = PCURVE('',#11343,#11797);+#11797 = DEFINITIONAL_REPRESENTATION('',(#11798),#11802);+#11798 = LINE('',#11799,#11800);+#11799 = CARTESIAN_POINT('',(0.,0.));+#11800 = VECTOR('',#11801,1.);+#11801 = DIRECTION('',(0.,-1.));+#11802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11803 = PCURVE('',#11313,#11804);+#11804 = DEFINITIONAL_REPRESENTATION('',(#11805),#11809);+#11805 = LINE('',#11806,#11807);+#11806 = CARTESIAN_POINT('',(1.,0.));+#11807 = VECTOR('',#11808,1.);+#11808 = DIRECTION('',(0.,-1.));+#11809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11810 = ORIENTED_EDGE('',*,*,#11327,.T.);+#11811 = ORIENTED_EDGE('',*,*,#11763,.F.);+#11812 = ADVANCED_FACE('',(#11813),#11313,.T.);+#11813 = FACE_BOUND('',#11814,.T.);+#11814 = EDGE_LOOP('',(#11815,#11816,#11837,#11838));+#11815 = ORIENTED_EDGE('',*,*,#11617,.T.);+#11816 = ORIENTED_EDGE('',*,*,#11817,.T.);+#11817 = EDGE_CURVE('',#11589,#11268,#11818,.T.);+#11818 = SURFACE_CURVE('',#11819,(#11823,#11830),.PCURVE_S1.);+#11819 = LINE('',#11820,#11821);+#11820 = CARTESIAN_POINT('',(6.355917011737E-02,1.759368549384E-02,+ 1.2500001));+#11821 = VECTOR('',#11822,1.);+#11822 = DIRECTION('',(-0.,-0.,-1.));+#11823 = PCURVE('',#11313,#11824);+#11824 = DEFINITIONAL_REPRESENTATION('',(#11825),#11829);+#11825 = LINE('',#11826,#11827);+#11826 = CARTESIAN_POINT('',(0.,0.));+#11827 = VECTOR('',#11828,1.);+#11828 = DIRECTION('',(0.,-1.));+#11829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11830 = PCURVE('',#11283,#11831);+#11831 = DEFINITIONAL_REPRESENTATION('',(#11832),#11836);+#11832 = LINE('',#11833,#11834);+#11833 = CARTESIAN_POINT('',(1.,0.));+#11834 = VECTOR('',#11835,1.);+#11835 = DIRECTION('',(0.,-1.));+#11836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11837 = ORIENTED_EDGE('',*,*,#11297,.T.);+#11838 = ORIENTED_EDGE('',*,*,#11790,.F.);+#11839 = ADVANCED_FACE('',(#11840),#11283,.T.);+#11840 = FACE_BOUND('',#11841,.T.);+#11841 = EDGE_LOOP('',(#11842,#11843,#11864,#11865));+#11842 = ORIENTED_EDGE('',*,*,#11588,.T.);+#11843 = ORIENTED_EDGE('',*,*,#11844,.T.);+#11844 = EDGE_CURVE('',#11560,#11238,#11845,.T.);+#11845 = SURFACE_CURVE('',#11846,(#11850,#11857),.PCURVE_S1.);+#11846 = LINE('',#11847,#11848);+#11847 = CARTESIAN_POINT('',(4.881851470362E-02,1.260088285369E-02,+ 1.2500001));+#11848 = VECTOR('',#11849,1.);+#11849 = DIRECTION('',(-0.,-0.,-1.));+#11850 = PCURVE('',#11283,#11851);+#11851 = DEFINITIONAL_REPRESENTATION('',(#11852),#11856);+#11852 = LINE('',#11853,#11854);+#11853 = CARTESIAN_POINT('',(0.,0.));+#11854 = VECTOR('',#11855,1.);+#11855 = DIRECTION('',(0.,-1.));+#11856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11857 = PCURVE('',#11253,#11858);+#11858 = DEFINITIONAL_REPRESENTATION('',(#11859),#11863);+#11859 = LINE('',#11860,#11861);+#11860 = CARTESIAN_POINT('',(1.,0.));+#11861 = VECTOR('',#11862,1.);+#11862 = DIRECTION('',(0.,-1.));+#11863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11864 = ORIENTED_EDGE('',*,*,#11267,.T.);+#11865 = ORIENTED_EDGE('',*,*,#11817,.F.);+#11866 = ADVANCED_FACE('',(#11867),#11253,.T.);+#11867 = FACE_BOUND('',#11868,.T.);+#11868 = EDGE_LOOP('',(#11869,#11870,#11891,#11892));+#11869 = ORIENTED_EDGE('',*,*,#11559,.T.);+#11870 = ORIENTED_EDGE('',*,*,#11871,.T.);+#11871 = EDGE_CURVE('',#11531,#11208,#11872,.T.);+#11872 = SURFACE_CURVE('',#11873,(#11877,#11884),.PCURVE_S1.);+#11873 = LINE('',#11874,#11875);+#11874 = CARTESIAN_POINT('',(3.415711012542E-02,1.759368549384E-02,+ 1.2500001));+#11875 = VECTOR('',#11876,1.);+#11876 = DIRECTION('',(-0.,-0.,-1.));+#11877 = PCURVE('',#11253,#11878);+#11878 = DEFINITIONAL_REPRESENTATION('',(#11879),#11883);+#11879 = LINE('',#11880,#11881);+#11880 = CARTESIAN_POINT('',(0.,0.));+#11881 = VECTOR('',#11882,1.);+#11882 = DIRECTION('',(0.,-1.));+#11883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11884 = PCURVE('',#11223,#11885);+#11885 = DEFINITIONAL_REPRESENTATION('',(#11886),#11890);+#11886 = LINE('',#11887,#11888);+#11887 = CARTESIAN_POINT('',(1.,0.));+#11888 = VECTOR('',#11889,1.);+#11889 = DIRECTION('',(0.,-1.));+#11890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11891 = ORIENTED_EDGE('',*,*,#11237,.T.);+#11892 = ORIENTED_EDGE('',*,*,#11844,.F.);+#11893 = ADVANCED_FACE('',(#11894),#11223,.T.);+#11894 = FACE_BOUND('',#11895,.T.);+#11895 = EDGE_LOOP('',(#11896,#11897,#11898,#11899));+#11896 = ORIENTED_EDGE('',*,*,#11530,.T.);+#11897 = ORIENTED_EDGE('',*,*,#11506,.T.);+#11898 = ORIENTED_EDGE('',*,*,#11205,.T.);+#11899 = ORIENTED_EDGE('',*,*,#11871,.F.);+#11900 = ADVANCED_FACE('',(#11901),#11189,.T.);+#11901 = FACE_BOUND('',#11902,.T.);+#11902 = EDGE_LOOP('',(#11903,#11939,#11960,#11961));+#11903 = ORIENTED_EDGE('',*,*,#11904,.T.);+#11904 = EDGE_CURVE('',#11905,#11907,#11909,.T.);+#11905 = VERTEX_POINT('',#11906);+#11906 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.2));+#11907 = VERTEX_POINT('',#11908);+#11908 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,1.2)+ );+#11909 = SURFACE_CURVE('',#11910,(#11916,#11925),.PCURVE_S1.);+#11910 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11911,#11912,#11913,#11914,+ #11915),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11911 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.2));+#11912 = CARTESIAN_POINT('',(5.412799615912E-02,0.,1.2));+#11913 = CARTESIAN_POINT('',(5.865202390392E-02,-1.003721201033E-03,1.2)+ );+#11914 = CARTESIAN_POINT('',(6.239015497033E-02,-3.011465113418E-03,1.2)+ );+#11915 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,1.2)+ );+#11916 = PCURVE('',#11189,#11917);+#11917 = DEFINITIONAL_REPRESENTATION('',(#11918),#11924);+#11918 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11919,#11920,#11921,#11922,+ #11923),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11919 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11920 = CARTESIAN_POINT('',(0.750015279601,-5.00001E-02));+#11921 = CARTESIAN_POINT('',(0.500013876161,-5.00001E-02));+#11922 = CARTESIAN_POINT('',(0.250005531884,-5.00001E-02));+#11923 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11925 = PCURVE('',#11926,#11931);+#11926 = PLANE('',#11927);+#11927 = AXIS2_PLACEMENT_3D('',#11928,#11929,#11930);+#11928 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#11929 = DIRECTION('',(0.,0.,1.));+#11930 = DIRECTION('',(0.43658423493,-0.899663384723,0.));+#11931 = DEFINITIONAL_REPRESENTATION('',(#11932),#11938);+#11932 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11933,#11934,#11935,#11936,+ #11937),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11933 = CARTESIAN_POINT('',(1.531037060078,4.392023017572E-02));+#11934 = CARTESIAN_POINT('',(1.533355095977,4.86969762331E-02));+#11935 = CARTESIAN_POINT('',(1.536233226382,5.232886949393E-02));+#11936 = CARTESIAN_POINT('',(1.539671529157,5.481537980175E-02));+#11937 = CARTESIAN_POINT('',(1.543669820013,5.615651273376E-02));+#11938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11939 = ORIENTED_EDGE('',*,*,#11940,.T.);+#11940 = EDGE_CURVE('',#11907,#11146,#11941,.T.);+#11941 = SURFACE_CURVE('',#11942,(#11946,#11953),.PCURVE_S1.);+#11942 = LINE('',#11943,#11944);+#11943 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,+ 1.2500001));+#11944 = VECTOR('',#11945,1.);+#11945 = DIRECTION('',(-0.,-0.,-1.));+#11946 = PCURVE('',#11189,#11947);+#11947 = DEFINITIONAL_REPRESENTATION('',(#11948),#11952);+#11948 = LINE('',#11949,#11950);+#11949 = CARTESIAN_POINT('',(0.,0.));+#11950 = VECTOR('',#11951,1.);+#11951 = DIRECTION('',(0.,-1.));+#11952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11953 = PCURVE('',#11161,#11954);+#11954 = DEFINITIONAL_REPRESENTATION('',(#11955),#11959);+#11955 = LINE('',#11956,#11957);+#11956 = CARTESIAN_POINT('',(1.,0.));+#11957 = VECTOR('',#11958,1.);+#11958 = DIRECTION('',(0.,-1.));+#11959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11960 = ORIENTED_EDGE('',*,*,#11175,.T.);+#11961 = ORIENTED_EDGE('',*,*,#11962,.F.);+#11962 = EDGE_CURVE('',#11905,#10964,#11963,.T.);+#11963 = SURFACE_CURVE('',#11964,(#11968,#11975),.PCURVE_S1.);+#11964 = LINE('',#11965,#11966);+#11965 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.2500001));+#11966 = VECTOR('',#11967,1.);+#11967 = DIRECTION('',(-0.,-0.,-1.));+#11968 = PCURVE('',#11189,#11969);+#11969 = DEFINITIONAL_REPRESENTATION('',(#11970),#11974);+#11970 = LINE('',#11971,#11972);+#11971 = CARTESIAN_POINT('',(1.,0.));+#11972 = VECTOR('',#11973,1.);+#11973 = DIRECTION('',(0.,-1.));+#11974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11975 = PCURVE('',#10981,#11976);+#11976 = DEFINITIONAL_REPRESENTATION('',(#11977),#11981);+#11977 = LINE('',#11978,#11979);+#11978 = CARTESIAN_POINT('',(0.,0.));+#11979 = VECTOR('',#11980,1.);+#11980 = DIRECTION('',(0.,-1.));+#11981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11982 = ADVANCED_FACE('',(#11983),#11926,.T.);+#11983 = FACE_BOUND('',#11984,.T.);+#11984 = EDGE_LOOP('',(#11985,#12014,#12043,#12072,#12101,#12130,#12159,+ #12186));+#11985 = ORIENTED_EDGE('',*,*,#11986,.F.);+#11986 = EDGE_CURVE('',#11987,#11905,#11989,.T.);+#11987 = VERTEX_POINT('',#11988);+#11988 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,1.2)+ );+#11989 = SURFACE_CURVE('',#11990,(#11996,#12005),.PCURVE_S1.);+#11990 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11991,#11992,#11993,#11994,+ #11995),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11991 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,1.2)+ );+#11992 = CARTESIAN_POINT('',(3.520725614021E-02,-2.991644627402E-03,1.2)+ );+#11993 = CARTESIAN_POINT('',(3.893218705981E-02,-9.971109082649E-04,1.2)+ );+#11994 = CARTESIAN_POINT('',(4.346942866075E-02,0.,1.2));+#11995 = CARTESIAN_POINT('',(4.881851470362E-02,0.,1.2));+#11996 = PCURVE('',#11926,#11997);+#11997 = DEFINITIONAL_REPRESENTATION('',(#11998),#12004);+#11998 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11999,#12000,#12001,#12002,+ #12003),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11999 = CARTESIAN_POINT('',(1.529206109999,2.644209830813E-02));+#12000 = CARTESIAN_POINT('',(1.527786072303,3.03685743454E-02));+#12001 = CARTESIAN_POINT('',(1.527617909462,3.459054028219E-02));+#12002 = CARTESIAN_POINT('',(1.52870173344,3.910785332123E-02));+#12003 = CARTESIAN_POINT('',(1.531037060078,4.392023017572E-02));+#12004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12005 = PCURVE('',#10981,#12006);+#12006 = DEFINITIONAL_REPRESENTATION('',(#12007),#12013);+#12007 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12008,#12009,#12010,#12011,+ #12012),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12008 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#12009 = CARTESIAN_POINT('',(0.749993781593,-5.00001E-02));+#12010 = CARTESIAN_POINT('',(0.499985092519,-5.00001E-02));+#12011 = CARTESIAN_POINT('',(0.249983860094,-5.00001E-02));+#12012 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#12013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12014 = ORIENTED_EDGE('',*,*,#12015,.F.);+#12015 = EDGE_CURVE('',#12016,#11987,#12018,.T.);+#12016 = VERTEX_POINT('',#12017);+#12017 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,1.2)+ );+#12018 = SURFACE_CURVE('',#12019,(#12025,#12034),.PCURVE_S1.);+#12019 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12020,#12021,#12022,#12023,+ #12024),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12020 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,1.2)+ );+#12021 = CARTESIAN_POINT('',(2.646977907631E-02,-1.743556297271E-02,1.2)+ );+#12022 = CARTESIAN_POINT('',(2.74404671757E-02,-1.279265478591E-02,1.2)+ );+#12023 = CARTESIAN_POINT('',(2.938215880251E-02,-8.97524801511E-03,1.2)+ );+#12024 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,1.2)+ );+#12025 = PCURVE('',#11926,#12026);+#12026 = DEFINITIONAL_REPRESENTATION('',(#12027),#12033);+#12027 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12028,#12029,#12030,#12031,+ #12032),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12028 = CARTESIAN_POINT('',(1.541885387096,1.381458773362E-02));+#12029 = CARTESIAN_POINT('',(1.536966092031,1.620179911597E-02));+#12030 = CARTESIAN_POINT('',(1.533212824658,1.910211217556E-02));+#12031 = CARTESIAN_POINT('',(1.530626155515,2.251560065107E-02));+#12032 = CARTESIAN_POINT('',(1.529206109999,2.644209830813E-02));+#12033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12034 = PCURVE('',#11011,#12035);+#12035 = DEFINITIONAL_REPRESENTATION('',(#12036),#12042);+#12036 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12037,#12038,#12039,#12040,+ #12041),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12037 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#12038 = CARTESIAN_POINT('',(0.750017333973,-5.00001E-02));+#12039 = CARTESIAN_POINT('',(0.500016621512,-5.00001E-02));+#12040 = CARTESIAN_POINT('',(0.25000759498,-5.00001E-02));+#12041 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#12042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12043 = ORIENTED_EDGE('',*,*,#12044,.F.);+#12044 = EDGE_CURVE('',#12045,#12016,#12047,.T.);+#12045 = VERTEX_POINT('',#12046);+#12046 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,1.2)+ );+#12047 = SURFACE_CURVE('',#12048,(#12054,#12063),.PCURVE_S1.);+#12048 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12049,#12050,#12051,#12052,+ #12053),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12049 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,1.2)+ );+#12050 = CARTESIAN_POINT('',(2.942178872578E-02,-3.687136501385E-02,1.2)+ );+#12051 = CARTESIAN_POINT('',(2.745367742476E-02,-3.302754556433E-02,1.2)+ );+#12052 = CARTESIAN_POINT('',(2.646977907631E-02,-2.837143000414E-02,1.2)+ );+#12053 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,1.2)+ );+#12054 = PCURVE('',#11926,#12055);+#12055 = DEFINITIONAL_REPRESENTATION('',(#12056),#12062);+#12056 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12057,#12058,#12059,#12060,+ #12061),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12057 = CARTESIAN_POINT('',(1.559756713748,1.170474058778E-02));+#12058 = CARTESIAN_POINT('',(1.555740572354,1.037224934456E-02));+#12059 = CARTESIAN_POINT('',(1.551423182372,1.027976264355E-02));+#12060 = CARTESIAN_POINT('',(1.546804691179,1.142737197476E-02));+#12061 = CARTESIAN_POINT('',(1.541885387096,1.381458773362E-02));+#12062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12063 = PCURVE('',#11041,#12064);+#12064 = DEFINITIONAL_REPRESENTATION('',(#12065),#12071);+#12065 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12066,#12067,#12068,#12069,+ #12070),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12066 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#12067 = CARTESIAN_POINT('',(0.749992888516,-5.00001E-02));+#12068 = CARTESIAN_POINT('',(0.499984006453,-5.00001E-02));+#12069 = CARTESIAN_POINT('',(0.249983124324,-5.00001E-02));+#12070 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#12071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12072 = ORIENTED_EDGE('',*,*,#12073,.F.);+#12073 = EDGE_CURVE('',#12074,#12045,#12076,.T.);+#12074 = VERTEX_POINT('',#12075);+#12075 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,1.2)+ );+#12076 = SURFACE_CURVE('',#12077,(#12083,#12092),.PCURVE_S1.);+#12077 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12078,#12079,#12080,#12081,+ #12082),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12078 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,1.2)+ );+#12079 = CARTESIAN_POINT('',(4.354864442841E-02,-4.596548462354E-02,1.2)+ );+#12080 = CARTESIAN_POINT('',(3.905103560223E-02,-4.495515546225E-02,1.2)+ );+#12081 = CARTESIAN_POINT('',(3.532611916817E-02,-4.293420097148E-02,1.2)+ );+#12082 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,1.2)+ );+#12083 = PCURVE('',#11926,#12084);+#12084 = DEFINITIONAL_REPRESENTATION('',(#12085),#12091);+#12085 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12086,#12087,#12088,#12089,+ #12090),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12086 = CARTESIAN_POINT('',(1.572390523555,2.385242423816E-02));+#12087 = CARTESIAN_POINT('',(1.570089781272,1.911131490932E-02));+#12088 = CARTESIAN_POINT('',(1.567217240011,1.550607471351E-02));+#12089 = CARTESIAN_POINT('',(1.563772821462,1.303722065681E-02));+#12090 = CARTESIAN_POINT('',(1.559756713748,1.170474058778E-02));+#12091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12092 = PCURVE('',#11071,#12093);+#12093 = DEFINITIONAL_REPRESENTATION('',(#12094),#12100);+#12094 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12095,#12096,#12097,#12098,+ #12099),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12095 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#12096 = CARTESIAN_POINT('',(0.750014719106,-5.00001E-02));+#12097 = CARTESIAN_POINT('',(0.500013157759,-5.00001E-02));+#12098 = CARTESIAN_POINT('',(0.250005014939,-5.00001E-02));+#12099 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#12100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12101 = ORIENTED_EDGE('',*,*,#12102,.F.);+#12102 = EDGE_CURVE('',#12103,#12074,#12105,.T.);+#12103 = VERTEX_POINT('',#12104);+#12104 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,1.2)+ );+#12105 = SURFACE_CURVE('',#12106,(#12112,#12121),.PCURVE_S1.);+#12106 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12107,#12108,#12109,#12110,+ #12111),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12107 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,1.2)+ );+#12108 = CARTESIAN_POINT('',(6.250901990278E-02,-4.297384431022E-02,1.2)+ );+#12109 = CARTESIAN_POINT('',(5.877087506431E-02,-4.496837762581E-02,1.2)+ );+#12110 = CARTESIAN_POINT('',(5.42072130408E-02,-4.596548462354E-02,1.2)+ );+#12111 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,1.2)+ );+#12112 = PCURVE('',#11926,#12113);+#12113 = DEFINITIONAL_REPRESENTATION('',(#12114),#12120);+#12114 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12115,#12116,#12117,#12118,+ #12119),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12115 = CARTESIAN_POINT('',(1.574256073298,4.140185518071E-02));+#12116 = CARTESIAN_POINT('',(1.575676113043,3.747537348157E-02));+#12117 = CARTESIAN_POINT('',(1.575838506532,3.324151964198E-02));+#12118 = CARTESIAN_POINT('',(1.574743144295,2.870043882343E-02));+#12119 = CARTESIAN_POINT('',(1.572390523555,2.385242423816E-02));+#12120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12121 = PCURVE('',#11101,#12122);+#12122 = DEFINITIONAL_REPRESENTATION('',(#12123),#12129);+#12123 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12124,#12125,#12126,#12127,+ #12128),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12124 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#12125 = CARTESIAN_POINT('',(0.749993421091,-5.00001E-02));+#12126 = CARTESIAN_POINT('',(0.49998452535,-5.00001E-02));+#12127 = CARTESIAN_POINT('',(0.249983369968,-5.00001E-02));+#12128 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#12129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12130 = ORIENTED_EDGE('',*,*,#12131,.F.);+#12131 = EDGE_CURVE('',#12132,#12103,#12134,.T.);+#12132 = VERTEX_POINT('',#12133);+#12133 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,1.2)+ );+#12134 = SURFACE_CURVE('',#12135,(#12141,#12150),.PCURVE_S1.);+#12135 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12136,#12137,#12138,#12139,+ #12140),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12136 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,1.2)+ );+#12137 = CARTESIAN_POINT('',(7.124650116648E-02,-2.845064301199E-02,1.2)+ );+#12138 = CARTESIAN_POINT('',(7.027582087559E-02,-3.31463923189E-02,1.2)+ );+#12139 = CARTESIAN_POINT('',(6.833413005931E-02,-3.699022775486E-02,1.2)+ );+#12140 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,1.2)+ );+#12141 = PCURVE('',#11926,#12142);+#12142 = DEFINITIONAL_REPRESENTATION('',(#12143),#12149);+#12143 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12144,#12145,#12146,#12147,+ #12148),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12144 = CARTESIAN_POINT('',(1.561434198052,5.409856508604E-02));+#12145 = CARTESIAN_POINT('',(1.566424767178,5.167676617675E-02));+#12146 = CARTESIAN_POINT('',(1.570225577182,4.875339054218E-02));+#12147 = CARTESIAN_POINT('',(1.572836023581,4.532836445732E-02));+#12148 = CARTESIAN_POINT('',(1.574256073298,4.140185518071E-02));+#12149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12150 = PCURVE('',#11131,#12151);+#12151 = DEFINITIONAL_REPRESENTATION('',(#12152),#12158);+#12152 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12153,#12154,#12155,#12156,+ #12157),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12153 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#12154 = CARTESIAN_POINT('',(0.750018339296,-5.00001E-02));+#12155 = CARTESIAN_POINT('',(0.500017785105,-5.00001E-02));+#12156 = CARTESIAN_POINT('',(0.250008334819,-5.00001E-02));+#12157 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#12158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12159 = ORIENTED_EDGE('',*,*,#12160,.F.);+#12160 = EDGE_CURVE('',#11907,#12132,#12161,.T.);+#12161 = SURFACE_CURVE('',#12162,(#12168,#12177),.PCURVE_S1.);+#12162 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12163,#12164,#12165,#12166,+ #12167),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12163 = CARTESIAN_POINT('',(6.534231391742E-02,-6.023063502394E-03,1.2)+ );+#12164 = CARTESIAN_POINT('',(6.829448821175E-02,-9.034677547616E-03,1.2)+ );+#12165 = CARTESIAN_POINT('',(7.026260011067E-02,-1.285207552928E-02,1.2)+ );+#12166 = CARTESIAN_POINT('',(7.124650116648E-02,-1.747516822386E-02,1.2)+ );+#12167 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,1.2)+ );+#12168 = PCURVE('',#11926,#12169);+#12169 = DEFINITIONAL_REPRESENTATION('',(#12170),#12176);+#12170 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12171,#12172,#12173,#12174,+ #12175),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12171 = CARTESIAN_POINT('',(1.543669820013,5.615651273376E-02));+#12172 = CARTESIAN_POINT('',(1.547668131654,5.749765263785E-02));+#12173 = CARTESIAN_POINT('',(1.55196175147,5.760167507309E-02));+#12174 = CARTESIAN_POINT('',(1.556550534382,5.646848544012E-02));+#12175 = CARTESIAN_POINT('',(1.561434198052,5.409856508604E-02));+#12176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12177 = PCURVE('',#11161,#12178);+#12178 = DEFINITIONAL_REPRESENTATION('',(#12179),#12185);+#12179 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#12180,#12181,#12182,#12183,+ #12184),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#12180 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#12181 = CARTESIAN_POINT('',(0.749993168425,-5.00001E-02));+#12182 = CARTESIAN_POINT('',(0.499984422369,-5.00001E-02));+#12183 = CARTESIAN_POINT('',(0.249983468209,-5.00001E-02));+#12184 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#12185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12186 = ORIENTED_EDGE('',*,*,#11904,.F.);+#12187 = ADVANCED_FACE('',(#12188),#11161,.T.);+#12188 = FACE_BOUND('',#12189,.T.);+#12189 = EDGE_LOOP('',(#12190,#12191,#12212,#12213));+#12190 = ORIENTED_EDGE('',*,*,#12160,.T.);+#12191 = ORIENTED_EDGE('',*,*,#12192,.T.);+#12192 = EDGE_CURVE('',#12132,#11116,#12193,.T.);+#12193 = SURFACE_CURVE('',#12194,(#12198,#12205),.PCURVE_S1.);+#12194 = LINE('',#12195,#12196);+#12195 = CARTESIAN_POINT('',(7.124650116648E-02,-2.290349147621E-02,+ 1.2500001));+#12196 = VECTOR('',#12197,1.);+#12197 = DIRECTION('',(-0.,-0.,-1.));+#12198 = PCURVE('',#11161,#12199);+#12199 = DEFINITIONAL_REPRESENTATION('',(#12200),#12204);+#12200 = LINE('',#12201,#12202);+#12201 = CARTESIAN_POINT('',(0.,0.));+#12202 = VECTOR('',#12203,1.);+#12203 = DIRECTION('',(0.,-1.));+#12204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12205 = PCURVE('',#11131,#12206);+#12206 = DEFINITIONAL_REPRESENTATION('',(#12207),#12211);+#12207 = LINE('',#12208,#12209);+#12208 = CARTESIAN_POINT('',(1.,0.));+#12209 = VECTOR('',#12210,1.);+#12210 = DIRECTION('',(0.,-1.));+#12211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12212 = ORIENTED_EDGE('',*,*,#11145,.T.);+#12213 = ORIENTED_EDGE('',*,*,#11940,.F.);+#12214 = ADVANCED_FACE('',(#12215),#11131,.T.);+#12215 = FACE_BOUND('',#12216,.T.);+#12216 = EDGE_LOOP('',(#12217,#12218,#12239,#12240));+#12217 = ORIENTED_EDGE('',*,*,#12131,.T.);+#12218 = ORIENTED_EDGE('',*,*,#12219,.T.);+#12219 = EDGE_CURVE('',#12103,#11086,#12220,.T.);+#12220 = SURFACE_CURVE('',#12221,(#12225,#12232),.PCURVE_S1.);+#12221 = LINE('',#12222,#12223);+#12222 = CARTESIAN_POINT('',(6.542156475298E-02,-3.998204653892E-02,+ 1.2500001));+#12223 = VECTOR('',#12224,1.);+#12224 = DIRECTION('',(-0.,-0.,-1.));+#12225 = PCURVE('',#11131,#12226);+#12226 = DEFINITIONAL_REPRESENTATION('',(#12227),#12231);+#12227 = LINE('',#12228,#12229);+#12228 = CARTESIAN_POINT('',(0.,0.));+#12229 = VECTOR('',#12230,1.);+#12230 = DIRECTION('',(0.,-1.));+#12231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12232 = PCURVE('',#11101,#12233);+#12233 = DEFINITIONAL_REPRESENTATION('',(#12234),#12238);+#12234 = LINE('',#12235,#12236);+#12235 = CARTESIAN_POINT('',(1.,0.));+#12236 = VECTOR('',#12237,1.);+#12237 = DIRECTION('',(0.,-1.));+#12238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12239 = ORIENTED_EDGE('',*,*,#11115,.T.);+#12240 = ORIENTED_EDGE('',*,*,#12192,.F.);+#12241 = ADVANCED_FACE('',(#12242),#11101,.T.);+#12242 = FACE_BOUND('',#12243,.T.);+#12243 = EDGE_LOOP('',(#12244,#12245,#12266,#12267));+#12244 = ORIENTED_EDGE('',*,*,#12102,.T.);+#12245 = ORIENTED_EDGE('',*,*,#12246,.T.);+#12246 = EDGE_CURVE('',#12074,#11056,#12247,.T.);+#12247 = SURFACE_CURVE('',#12248,(#12252,#12259),.PCURVE_S1.);+#12248 = LINE('',#12249,#12250);+#12249 = CARTESIAN_POINT('',(4.881851470362E-02,-4.596548462354E-02,+ 1.2500001));+#12250 = VECTOR('',#12251,1.);+#12251 = DIRECTION('',(-0.,-0.,-1.));+#12252 = PCURVE('',#11101,#12253);+#12253 = DEFINITIONAL_REPRESENTATION('',(#12254),#12258);+#12254 = LINE('',#12255,#12256);+#12255 = CARTESIAN_POINT('',(0.,0.));+#12256 = VECTOR('',#12257,1.);+#12257 = DIRECTION('',(0.,-1.));+#12258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12259 = PCURVE('',#11071,#12260);+#12260 = DEFINITIONAL_REPRESENTATION('',(#12261),#12265);+#12261 = LINE('',#12262,#12263);+#12262 = CARTESIAN_POINT('',(1.,0.));+#12263 = VECTOR('',#12264,1.);+#12264 = DIRECTION('',(0.,-1.));+#12265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12266 = ORIENTED_EDGE('',*,*,#11085,.T.);+#12267 = ORIENTED_EDGE('',*,*,#12219,.F.);+#12268 = ADVANCED_FACE('',(#12269),#11071,.T.);+#12269 = FACE_BOUND('',#12270,.T.);+#12270 = EDGE_LOOP('',(#12271,#12272,#12293,#12294));+#12271 = ORIENTED_EDGE('',*,*,#12073,.T.);+#12272 = ORIENTED_EDGE('',*,*,#12273,.T.);+#12273 = EDGE_CURVE('',#12045,#11026,#12274,.T.);+#12274 = SURFACE_CURVE('',#12275,(#12279,#12286),.PCURVE_S1.);+#12275 = LINE('',#12276,#12277);+#12276 = CARTESIAN_POINT('',(3.237396632537E-02,-3.990279570336E-02,+ 1.2500001));+#12277 = VECTOR('',#12278,1.);+#12278 = DIRECTION('',(-0.,-0.,-1.));+#12279 = PCURVE('',#11071,#12280);+#12280 = DEFINITIONAL_REPRESENTATION('',(#12281),#12285);+#12281 = LINE('',#12282,#12283);+#12282 = CARTESIAN_POINT('',(0.,0.));+#12283 = VECTOR('',#12284,1.);+#12284 = DIRECTION('',(0.,-1.));+#12285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12286 = PCURVE('',#11041,#12287);+#12287 = DEFINITIONAL_REPRESENTATION('',(#12288),#12292);+#12288 = LINE('',#12289,#12290);+#12289 = CARTESIAN_POINT('',(1.,0.));+#12290 = VECTOR('',#12291,1.);+#12291 = DIRECTION('',(0.,-1.));+#12292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12293 = ORIENTED_EDGE('',*,*,#11055,.T.);+#12294 = ORIENTED_EDGE('',*,*,#12246,.F.);+#12295 = ADVANCED_FACE('',(#12296),#11041,.T.);+#12296 = FACE_BOUND('',#12297,.T.);+#12297 = EDGE_LOOP('',(#12298,#12299,#12320,#12321));+#12298 = ORIENTED_EDGE('',*,*,#12044,.T.);+#12299 = ORIENTED_EDGE('',*,*,#12300,.T.);+#12300 = EDGE_CURVE('',#12016,#10996,#12301,.T.);+#12301 = SURFACE_CURVE('',#12302,(#12306,#12313),.PCURVE_S1.);+#12302 = LINE('',#12303,#12304);+#12303 = CARTESIAN_POINT('',(2.646977907631E-02,-2.290349147621E-02,+ 1.2500001));+#12304 = VECTOR('',#12305,1.);+#12305 = DIRECTION('',(-0.,-0.,-1.));+#12306 = PCURVE('',#11041,#12307);+#12307 = DEFINITIONAL_REPRESENTATION('',(#12308),#12312);+#12308 = LINE('',#12309,#12310);+#12309 = CARTESIAN_POINT('',(0.,0.));+#12310 = VECTOR('',#12311,1.);+#12311 = DIRECTION('',(0.,-1.));+#12312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12313 = PCURVE('',#11011,#12314);+#12314 = DEFINITIONAL_REPRESENTATION('',(#12315),#12319);+#12315 = LINE('',#12316,#12317);+#12316 = CARTESIAN_POINT('',(1.,0.));+#12317 = VECTOR('',#12318,1.);+#12318 = DIRECTION('',(0.,-1.));+#12319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12320 = ORIENTED_EDGE('',*,*,#11025,.T.);+#12321 = ORIENTED_EDGE('',*,*,#12273,.F.);+#12322 = ADVANCED_FACE('',(#12323),#11011,.T.);+#12323 = FACE_BOUND('',#12324,.T.);+#12324 = EDGE_LOOP('',(#12325,#12326,#12347,#12348));+#12325 = ORIENTED_EDGE('',*,*,#12015,.T.);+#12326 = ORIENTED_EDGE('',*,*,#12327,.T.);+#12327 = EDGE_CURVE('',#11987,#10966,#12328,.T.);+#12328 = SURFACE_CURVE('',#12329,(#12333,#12340),.PCURVE_S1.);+#12329 = LINE('',#12330,#12331);+#12330 = CARTESIAN_POINT('',(3.229471548981E-02,-5.983438084615E-03,+ 1.2500001));+#12331 = VECTOR('',#12332,1.);+#12332 = DIRECTION('',(-0.,-0.,-1.));+#12333 = PCURVE('',#11011,#12334);+#12334 = DEFINITIONAL_REPRESENTATION('',(#12335),#12339);+#12335 = LINE('',#12336,#12337);+#12336 = CARTESIAN_POINT('',(0.,0.));+#12337 = VECTOR('',#12338,1.);+#12338 = DIRECTION('',(0.,-1.));+#12339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12340 = PCURVE('',#10981,#12341);+#12341 = DEFINITIONAL_REPRESENTATION('',(#12342),#12346);+#12342 = LINE('',#12343,#12344);+#12343 = CARTESIAN_POINT('',(1.,0.));+#12344 = VECTOR('',#12345,1.);+#12345 = DIRECTION('',(0.,-1.));+#12346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12347 = ORIENTED_EDGE('',*,*,#10995,.T.);+#12348 = ORIENTED_EDGE('',*,*,#12300,.F.);+#12349 = ADVANCED_FACE('',(#12350),#10981,.T.);+#12350 = FACE_BOUND('',#12351,.T.);+#12351 = EDGE_LOOP('',(#12352,#12353,#12354,#12355));+#12352 = ORIENTED_EDGE('',*,*,#11986,.T.);+#12353 = ORIENTED_EDGE('',*,*,#11962,.T.);+#12354 = ORIENTED_EDGE('',*,*,#10963,.T.);+#12355 = ORIENTED_EDGE('',*,*,#12327,.F.);+#12356 = ADVANCED_FACE('',(#12357),#4125,.T.);+#12357 = FACE_BOUND('',#12358,.T.);+#12358 = EDGE_LOOP('',(#12359,#12360,#12381,#12382));+#12359 = ORIENTED_EDGE('',*,*,#4105,.T.);+#12360 = ORIENTED_EDGE('',*,*,#12361,.T.);+#12361 = EDGE_CURVE('',#4070,#10917,#12362,.T.);+#12362 = SURFACE_CURVE('',#12363,(#12367,#12374),.PCURVE_S1.);+#12363 = LINE('',#12364,#12365);+#12364 = CARTESIAN_POINT('',(1.038185945807E-02,-2.456775902292E-02,+ 1.2500001));+#12365 = VECTOR('',#12366,1.);+#12366 = DIRECTION('',(-0.,-0.,-1.));+#12367 = PCURVE('',#4125,#12368);+#12368 = DEFINITIONAL_REPRESENTATION('',(#12369),#12373);+#12369 = LINE('',#12370,#12371);+#12370 = CARTESIAN_POINT('',(0.,0.));+#12371 = VECTOR('',#12372,1.);+#12372 = DIRECTION('',(0.,-1.));+#12373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12374 = PCURVE('',#4089,#12375);+#12375 = DEFINITIONAL_REPRESENTATION('',(#12376),#12380);+#12376 = LINE('',#12377,#12378);+#12377 = CARTESIAN_POINT('',(1.,0.));+#12378 = VECTOR('',#12379,1.);+#12379 = DIRECTION('',(0.,-1.));+#12380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12381 = ORIENTED_EDGE('',*,*,#10939,.T.);+#12382 = ORIENTED_EDGE('',*,*,#10542,.F.);+#12383 = ADVANCED_FACE('',(#12384),#4089,.T.);+#12384 = FACE_BOUND('',#12385,.T.);+#12385 = EDGE_LOOP('',(#12386,#12387,#12408,#12409));+#12386 = ORIENTED_EDGE('',*,*,#4069,.T.);+#12387 = ORIENTED_EDGE('',*,*,#12388,.T.);+#12388 = EDGE_CURVE('',#4034,#10894,#12389,.T.);+#12389 = SURFACE_CURVE('',#12390,(#12394,#12401),.PCURVE_S1.);+#12390 = LINE('',#12391,#12392);+#12391 = CARTESIAN_POINT('',(2.056559182725E-02,-4.949214680586E-02,+ 1.2500001));+#12392 = VECTOR('',#12393,1.);+#12393 = DIRECTION('',(-0.,-0.,-1.));+#12394 = PCURVE('',#4089,#12395);+#12395 = DEFINITIONAL_REPRESENTATION('',(#12396),#12400);+#12396 = LINE('',#12397,#12398);+#12397 = CARTESIAN_POINT('',(0.,0.));+#12398 = VECTOR('',#12399,1.);+#12399 = DIRECTION('',(0.,-1.));+#12400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12401 = PCURVE('',#4053,#12402);+#12402 = DEFINITIONAL_REPRESENTATION('',(#12403),#12407);+#12403 = LINE('',#12404,#12405);+#12404 = CARTESIAN_POINT('',(1.,0.));+#12405 = VECTOR('',#12406,1.);+#12406 = DIRECTION('',(0.,-1.));+#12407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12408 = ORIENTED_EDGE('',*,*,#10916,.T.);+#12409 = ORIENTED_EDGE('',*,*,#12361,.F.);+#12410 = ADVANCED_FACE('',(#12411),#4053,.T.);+#12411 = FACE_BOUND('',#12412,.T.);+#12412 = EDGE_LOOP('',(#12413,#12414,#12435,#12436));+#12413 = ORIENTED_EDGE('',*,*,#4033,.T.);+#12414 = ORIENTED_EDGE('',*,*,#12415,.T.);+#12415 = EDGE_CURVE('',#3998,#10871,#12416,.T.);+#12416 = SURFACE_CURVE('',#12417,(#12421,#12428),.PCURVE_S1.);+#12417 = LINE('',#12418,#12419);+#12418 = CARTESIAN_POINT('',(4.881851470362E-02,-5.848711664167E-02,+ 1.2500001));+#12419 = VECTOR('',#12420,1.);+#12420 = DIRECTION('',(-0.,-0.,-1.));+#12421 = PCURVE('',#4053,#12422);+#12422 = DEFINITIONAL_REPRESENTATION('',(#12423),#12427);+#12423 = LINE('',#12424,#12425);+#12424 = CARTESIAN_POINT('',(0.,0.));+#12425 = VECTOR('',#12426,1.);+#12426 = DIRECTION('',(0.,-1.));+#12427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12428 = PCURVE('',#4017,#12429);+#12429 = DEFINITIONAL_REPRESENTATION('',(#12430),#12434);+#12430 = LINE('',#12431,#12432);+#12431 = CARTESIAN_POINT('',(1.,0.));+#12432 = VECTOR('',#12433,1.);+#12433 = DIRECTION('',(0.,-1.));+#12434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12435 = ORIENTED_EDGE('',*,*,#10893,.T.);+#12436 = ORIENTED_EDGE('',*,*,#12388,.F.);+#12437 = ADVANCED_FACE('',(#12438),#4017,.T.);+#12438 = FACE_BOUND('',#12439,.T.);+#12439 = EDGE_LOOP('',(#12440,#12441,#12462,#12463));+#12440 = ORIENTED_EDGE('',*,*,#3997,.T.);+#12441 = ORIENTED_EDGE('',*,*,#12442,.T.);+#12442 = EDGE_CURVE('',#3953,#10848,#12443,.T.);+#12443 = SURFACE_CURVE('',#12444,(#12448,#12455),.PCURVE_S1.);+#12444 = LINE('',#12445,#12446);+#12445 = CARTESIAN_POINT('',(7.711106299776E-02,-4.945252138808E-02,+ 1.2500001));+#12446 = VECTOR('',#12447,1.);+#12447 = DIRECTION('',(-0.,-0.,-1.));+#12448 = PCURVE('',#4017,#12449);+#12449 = DEFINITIONAL_REPRESENTATION('',(#12450),#12454);+#12450 = LINE('',#12451,#12452);+#12451 = CARTESIAN_POINT('',(0.,0.));+#12452 = VECTOR('',#12453,1.);+#12453 = DIRECTION('',(0.,-1.));+#12454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12455 = PCURVE('',#3978,#12456);+#12456 = DEFINITIONAL_REPRESENTATION('',(#12457),#12461);+#12457 = LINE('',#12458,#12459);+#12458 = CARTESIAN_POINT('',(1.,0.));+#12459 = VECTOR('',#12460,1.);+#12460 = DIRECTION('',(0.,-1.));+#12461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12462 = ORIENTED_EDGE('',*,*,#10870,.T.);+#12463 = ORIENTED_EDGE('',*,*,#12415,.F.);+#12464 = ADVANCED_FACE('',(#12465),#3978,.T.);+#12465 = FACE_BOUND('',#12466,.T.);+#12466 = EDGE_LOOP('',(#12467,#12468,#12489,#12490));+#12467 = ORIENTED_EDGE('',*,*,#3952,.T.);+#12468 = ORIENTED_EDGE('',*,*,#12469,.T.);+#12469 = EDGE_CURVE('',#3917,#10825,#12470,.T.);+#12470 = SURFACE_CURVE('',#12471,(#12475,#12482),.PCURVE_S1.);+#12471 = LINE('',#12472,#12473);+#12472 = CARTESIAN_POINT('',(8.733442078472E-02,-2.440925735181E-02,+ 1.2500001));+#12473 = VECTOR('',#12474,1.);+#12474 = DIRECTION('',(-0.,-0.,-1.));+#12475 = PCURVE('',#3978,#12476);+#12476 = DEFINITIONAL_REPRESENTATION('',(#12477),#12481);+#12477 = LINE('',#12478,#12479);+#12478 = CARTESIAN_POINT('',(0.,0.));+#12479 = VECTOR('',#12480,1.);+#12480 = DIRECTION('',(0.,-1.));+#12481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12482 = PCURVE('',#3936,#12483);+#12483 = DEFINITIONAL_REPRESENTATION('',(#12484),#12488);+#12484 = LINE('',#12485,#12486);+#12485 = CARTESIAN_POINT('',(1.,0.));+#12486 = VECTOR('',#12487,1.);+#12487 = DIRECTION('',(0.,-1.));+#12488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12489 = ORIENTED_EDGE('',*,*,#10847,.T.);+#12490 = ORIENTED_EDGE('',*,*,#12442,.F.);+#12491 = ADVANCED_FACE('',(#12492),#3936,.T.);+#12492 = FACE_BOUND('',#12493,.T.);+#12493 = EDGE_LOOP('',(#12494,#12495,#12516,#12517));+#12494 = ORIENTED_EDGE('',*,*,#3916,.T.);+#12495 = ORIENTED_EDGE('',*,*,#12496,.T.);+#12496 = EDGE_CURVE('',#3881,#10802,#12497,.T.);+#12497 = SURFACE_CURVE('',#12498,(#12502,#12509),.PCURVE_S1.);+#12498 = LINE('',#12499,#12500);+#12499 = CARTESIAN_POINT('',(8.103397935787E-02,-3.883290942333E-03,+ 1.2500001));+#12500 = VECTOR('',#12501,1.);+#12501 = DIRECTION('',(-0.,-0.,-1.));+#12502 = PCURVE('',#3936,#12503);+#12503 = DEFINITIONAL_REPRESENTATION('',(#12504),#12508);+#12504 = LINE('',#12505,#12506);+#12505 = CARTESIAN_POINT('',(0.,0.));+#12506 = VECTOR('',#12507,1.);+#12507 = DIRECTION('',(0.,-1.));+#12508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12509 = PCURVE('',#3900,#12510);+#12510 = DEFINITIONAL_REPRESENTATION('',(#12511),#12515);+#12511 = LINE('',#12512,#12513);+#12512 = CARTESIAN_POINT('',(1.,0.));+#12513 = VECTOR('',#12514,1.);+#12514 = DIRECTION('',(0.,-1.));+#12515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12516 = ORIENTED_EDGE('',*,*,#10824,.T.);+#12517 = ORIENTED_EDGE('',*,*,#12469,.F.);+#12518 = ADVANCED_FACE('',(#12519),#3900,.T.);+#12519 = FACE_BOUND('',#12520,.T.);+#12520 = EDGE_LOOP('',(#12521,#12522,#12543,#12544));+#12521 = ORIENTED_EDGE('',*,*,#3880,.T.);+#12522 = ORIENTED_EDGE('',*,*,#12523,.T.);+#12523 = EDGE_CURVE('',#3845,#10779,#12524,.T.);+#12524 = SURFACE_CURVE('',#12525,(#12529,#12536),.PCURVE_S1.);+#12525 = LINE('',#12526,#12527);+#12526 = CARTESIAN_POINT('',(6.284591259735E-02,6.657070186857E-03,+ 1.2500001));+#12527 = VECTOR('',#12528,1.);+#12528 = DIRECTION('',(-0.,-0.,-1.));+#12529 = PCURVE('',#3900,#12530);+#12530 = DEFINITIONAL_REPRESENTATION('',(#12531),#12535);+#12531 = LINE('',#12532,#12533);+#12532 = CARTESIAN_POINT('',(0.,0.));+#12533 = VECTOR('',#12534,1.);+#12534 = DIRECTION('',(0.,-1.));+#12535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12536 = PCURVE('',#3864,#12537);+#12537 = DEFINITIONAL_REPRESENTATION('',(#12538),#12542);+#12538 = LINE('',#12539,#12540);+#12539 = CARTESIAN_POINT('',(1.,0.));+#12540 = VECTOR('',#12541,1.);+#12541 = DIRECTION('',(0.,-1.));+#12542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12543 = ORIENTED_EDGE('',*,*,#10801,.T.);+#12544 = ORIENTED_EDGE('',*,*,#12496,.F.);+#12545 = ADVANCED_FACE('',(#12546),#3864,.T.);+#12546 = FACE_BOUND('',#12547,.T.);+#12547 = EDGE_LOOP('',(#12548,#12549,#12570,#12571));+#12548 = ORIENTED_EDGE('',*,*,#3844,.T.);+#12549 = ORIENTED_EDGE('',*,*,#12550,.T.);+#12550 = EDGE_CURVE('',#3809,#10756,#12551,.T.);+#12551 = SURFACE_CURVE('',#12552,(#12556,#12563),.PCURVE_S1.);+#12552 = LINE('',#12553,#12554);+#12553 = CARTESIAN_POINT('',(7.881495596225E-02,1.640492296047E-02,+ 1.2500001));+#12554 = VECTOR('',#12555,1.);+#12555 = DIRECTION('',(-0.,-0.,-1.));+#12556 = PCURVE('',#3864,#12557);+#12557 = DEFINITIONAL_REPRESENTATION('',(#12558),#12562);+#12558 = LINE('',#12559,#12560);+#12559 = CARTESIAN_POINT('',(0.,0.));+#12560 = VECTOR('',#12561,1.);+#12561 = DIRECTION('',(0.,-1.));+#12562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12563 = PCURVE('',#3828,#12564);+#12564 = DEFINITIONAL_REPRESENTATION('',(#12565),#12569);+#12565 = LINE('',#12566,#12567);+#12566 = CARTESIAN_POINT('',(1.,0.));+#12567 = VECTOR('',#12568,1.);+#12568 = DIRECTION('',(0.,-1.));+#12569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12570 = ORIENTED_EDGE('',*,*,#10778,.T.);+#12571 = ORIENTED_EDGE('',*,*,#12523,.F.);+#12572 = ADVANCED_FACE('',(#12573),#3828,.T.);+#12573 = FACE_BOUND('',#12574,.T.);+#12574 = EDGE_LOOP('',(#12575,#12576,#12597,#12598));+#12575 = ORIENTED_EDGE('',*,*,#3808,.T.);+#12576 = ORIENTED_EDGE('',*,*,#12577,.T.);+#12577 = EDGE_CURVE('',#3773,#10733,#12578,.T.);+#12578 = SURFACE_CURVE('',#12579,(#12583,#12590),.PCURVE_S1.);+#12579 = LINE('',#12580,#12581);+#12580 = CARTESIAN_POINT('',(8.456064154019E-02,3.360235427652E-02,+ 1.2500001));+#12581 = VECTOR('',#12582,1.);+#12582 = DIRECTION('',(-0.,-0.,-1.));+#12583 = PCURVE('',#3828,#12584);+#12584 = DEFINITIONAL_REPRESENTATION('',(#12585),#12589);+#12585 = LINE('',#12586,#12587);+#12586 = CARTESIAN_POINT('',(0.,0.));+#12587 = VECTOR('',#12588,1.);+#12588 = DIRECTION('',(0.,-1.));+#12589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12590 = PCURVE('',#3792,#12591);+#12591 = DEFINITIONAL_REPRESENTATION('',(#12592),#12596);+#12592 = LINE('',#12593,#12594);+#12593 = CARTESIAN_POINT('',(1.,0.));+#12594 = VECTOR('',#12595,1.);+#12595 = DIRECTION('',(0.,-1.));+#12596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12597 = ORIENTED_EDGE('',*,*,#10755,.T.);+#12598 = ORIENTED_EDGE('',*,*,#12550,.F.);+#12599 = ADVANCED_FACE('',(#12600),#3792,.T.);+#12600 = FACE_BOUND('',#12601,.T.);+#12601 = EDGE_LOOP('',(#12602,#12603,#12624,#12625));+#12602 = ORIENTED_EDGE('',*,*,#3772,.T.);+#12603 = ORIENTED_EDGE('',*,*,#12604,.T.);+#12604 = EDGE_CURVE('',#3737,#10710,#12605,.T.);+#12605 = SURFACE_CURVE('',#12606,(#12610,#12617),.PCURVE_S1.);+#12606 = LINE('',#12607,#12608);+#12607 = CARTESIAN_POINT('',(7.49712904377E-02,5.59907153216E-02,+ 1.2500001));+#12608 = VECTOR('',#12609,1.);+#12609 = DIRECTION('',(-0.,-0.,-1.));+#12610 = PCURVE('',#3792,#12611);+#12611 = DEFINITIONAL_REPRESENTATION('',(#12612),#12616);+#12612 = LINE('',#12613,#12614);+#12613 = CARTESIAN_POINT('',(0.,0.));+#12614 = VECTOR('',#12615,1.);+#12615 = DIRECTION('',(0.,-1.));+#12616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12617 = PCURVE('',#3756,#12618);+#12618 = DEFINITIONAL_REPRESENTATION('',(#12619),#12623);+#12619 = LINE('',#12620,#12621);+#12620 = CARTESIAN_POINT('',(1.,0.));+#12621 = VECTOR('',#12622,1.);+#12622 = DIRECTION('',(0.,-1.));+#12623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12624 = ORIENTED_EDGE('',*,*,#10732,.T.);+#12625 = ORIENTED_EDGE('',*,*,#12577,.F.);+#12626 = ADVANCED_FACE('',(#12627),#3756,.T.);+#12627 = FACE_BOUND('',#12628,.T.);+#12628 = EDGE_LOOP('',(#12629,#12630,#12651,#12652));+#12629 = ORIENTED_EDGE('',*,*,#3736,.T.);+#12630 = ORIENTED_EDGE('',*,*,#12631,.T.);+#12631 = EDGE_CURVE('',#3701,#10687,#12632,.T.);+#12632 = SURFACE_CURVE('',#12633,(#12637,#12644),.PCURVE_S1.);+#12633 = LINE('',#12634,#12635);+#12634 = CARTESIAN_POINT('',(4.881851470362E-02,6.427242763739E-02,+ 1.2500001));+#12635 = VECTOR('',#12636,1.);+#12636 = DIRECTION('',(-0.,-0.,-1.));+#12637 = PCURVE('',#3756,#12638);+#12638 = DEFINITIONAL_REPRESENTATION('',(#12639),#12643);+#12639 = LINE('',#12640,#12641);+#12640 = CARTESIAN_POINT('',(0.,0.));+#12641 = VECTOR('',#12642,1.);+#12642 = DIRECTION('',(0.,-1.));+#12643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12644 = PCURVE('',#3720,#12645);+#12645 = DEFINITIONAL_REPRESENTATION('',(#12646),#12650);+#12646 = LINE('',#12647,#12648);+#12647 = CARTESIAN_POINT('',(1.,0.));+#12648 = VECTOR('',#12649,1.);+#12649 = DIRECTION('',(0.,-1.));+#12650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12651 = ORIENTED_EDGE('',*,*,#10709,.T.);+#12652 = ORIENTED_EDGE('',*,*,#12604,.F.);+#12653 = ADVANCED_FACE('',(#12654),#3720,.T.);+#12654 = FACE_BOUND('',#12655,.T.);+#12655 = EDGE_LOOP('',(#12656,#12657,#12678,#12679));+#12656 = ORIENTED_EDGE('',*,*,#3700,.T.);+#12657 = ORIENTED_EDGE('',*,*,#12658,.T.);+#12658 = EDGE_CURVE('',#3665,#10664,#12659,.T.);+#12659 = SURFACE_CURVE('',#12660,(#12664,#12671),.PCURVE_S1.);+#12660 = LINE('',#12661,#12662);+#12661 = CARTESIAN_POINT('',(2.274498980509E-02,5.59907153216E-02,+ 1.2500001));+#12662 = VECTOR('',#12663,1.);+#12663 = DIRECTION('',(-0.,-0.,-1.));+#12664 = PCURVE('',#3720,#12665);+#12665 = DEFINITIONAL_REPRESENTATION('',(#12666),#12670);+#12666 = LINE('',#12667,#12668);+#12667 = CARTESIAN_POINT('',(0.,0.));+#12668 = VECTOR('',#12669,1.);+#12669 = DIRECTION('',(0.,-1.));+#12670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12671 = PCURVE('',#3684,#12672);+#12672 = DEFINITIONAL_REPRESENTATION('',(#12673),#12677);+#12673 = LINE('',#12674,#12675);+#12674 = CARTESIAN_POINT('',(1.,0.));+#12675 = VECTOR('',#12676,1.);+#12676 = DIRECTION('',(0.,-1.));+#12677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12678 = ORIENTED_EDGE('',*,*,#10686,.T.);+#12679 = ORIENTED_EDGE('',*,*,#12631,.F.);+#12680 = ADVANCED_FACE('',(#12681),#3684,.T.);+#12681 = FACE_BOUND('',#12682,.T.);+#12682 = EDGE_LOOP('',(#12683,#12684,#12705,#12706));+#12683 = ORIENTED_EDGE('',*,*,#3664,.T.);+#12684 = ORIENTED_EDGE('',*,*,#12685,.T.);+#12685 = EDGE_CURVE('',#3629,#10641,#12686,.T.);+#12686 = SURFACE_CURVE('',#12687,(#12691,#12698),.PCURVE_S1.);+#12687 = LINE('',#12688,#12689);+#12688 = CARTESIAN_POINT('',(1.31556387026E-02,3.360235427652E-02,+ 1.2500001));+#12689 = VECTOR('',#12690,1.);+#12690 = DIRECTION('',(-0.,-0.,-1.));+#12691 = PCURVE('',#3684,#12692);+#12692 = DEFINITIONAL_REPRESENTATION('',(#12693),#12697);+#12693 = LINE('',#12694,#12695);+#12694 = CARTESIAN_POINT('',(0.,0.));+#12695 = VECTOR('',#12696,1.);+#12696 = DIRECTION('',(0.,-1.));+#12697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12698 = PCURVE('',#3648,#12699);+#12699 = DEFINITIONAL_REPRESENTATION('',(#12700),#12704);+#12700 = LINE('',#12701,#12702);+#12701 = CARTESIAN_POINT('',(1.,0.));+#12702 = VECTOR('',#12703,1.);+#12703 = DIRECTION('',(0.,-1.));+#12704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12705 = ORIENTED_EDGE('',*,*,#10663,.T.);+#12706 = ORIENTED_EDGE('',*,*,#12658,.F.);+#12707 = ADVANCED_FACE('',(#12708),#3648,.T.);+#12708 = FACE_BOUND('',#12709,.T.);+#12709 = EDGE_LOOP('',(#12710,#12711,#12732,#12733));+#12710 = ORIENTED_EDGE('',*,*,#3628,.T.);+#12711 = ORIENTED_EDGE('',*,*,#12712,.T.);+#12712 = EDGE_CURVE('',#3591,#10618,#12713,.T.);+#12713 = SURFACE_CURVE('',#12714,(#12718,#12725),.PCURVE_S1.);+#12714 = LINE('',#12715,#12716);+#12715 = CARTESIAN_POINT('',(1.890132428054E-02,1.640492296047E-02,+ 1.2500001));+#12716 = VECTOR('',#12717,1.);+#12717 = DIRECTION('',(-0.,-0.,-1.));+#12718 = PCURVE('',#3648,#12719);+#12719 = DEFINITIONAL_REPRESENTATION('',(#12720),#12724);+#12720 = LINE('',#12721,#12722);+#12721 = CARTESIAN_POINT('',(0.,0.));+#12722 = VECTOR('',#12723,1.);+#12723 = DIRECTION('',(0.,-1.));+#12724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12725 = PCURVE('',#3612,#12726);+#12726 = DEFINITIONAL_REPRESENTATION('',(#12727),#12731);+#12727 = LINE('',#12728,#12729);+#12728 = CARTESIAN_POINT('',(1.,0.));+#12729 = VECTOR('',#12730,1.);+#12730 = DIRECTION('',(0.,-1.));+#12731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12732 = ORIENTED_EDGE('',*,*,#10640,.T.);+#12733 = ORIENTED_EDGE('',*,*,#12685,.F.);+#12734 = ADVANCED_FACE('',(#12735),#3612,.T.);+#12735 = FACE_BOUND('',#12736,.T.);+#12736 = EDGE_LOOP('',(#12737,#12738,#12739,#12740));+#12737 = ORIENTED_EDGE('',*,*,#3590,.T.);+#12738 = ORIENTED_EDGE('',*,*,#10593,.T.);+#12739 = ORIENTED_EDGE('',*,*,#10617,.T.);+#12740 = ORIENTED_EDGE('',*,*,#12712,.F.);+#12741 = ADVANCED_FACE('',(#12742),#3577,.T.);+#12742 = FACE_BOUND('',#12743,.T.);+#12743 = EDGE_LOOP('',(#12744,#12745,#12768,#12796));+#12744 = ORIENTED_EDGE('',*,*,#3563,.F.);+#12745 = ORIENTED_EDGE('',*,*,#12746,.T.);+#12746 = EDGE_CURVE('',#3528,#12747,#12749,.T.);+#12747 = VERTEX_POINT('',#12748);+#12748 = CARTESIAN_POINT('',(-6.284591259735E-02,-5.618884241049E-02,+ 1.1500001));+#12749 = SURFACE_CURVE('',#12750,(#12754,#12761),.PCURVE_S1.);+#12750 = LINE('',#12751,#12752);+#12751 = CARTESIAN_POINT('',(-6.284591259735E-02,-5.618884241049E-02,+ 1.2500001));+#12752 = VECTOR('',#12753,1.);+#12753 = DIRECTION('',(-0.,-0.,-1.));+#12754 = PCURVE('',#3577,#12755);+#12755 = DEFINITIONAL_REPRESENTATION('',(#12756),#12760);+#12756 = LINE('',#12757,#12758);+#12757 = CARTESIAN_POINT('',(0.,0.));+#12758 = VECTOR('',#12759,1.);+#12759 = DIRECTION('',(0.,-1.));+#12760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12761 = PCURVE('',#3547,#12762);+#12762 = DEFINITIONAL_REPRESENTATION('',(#12763),#12767);+#12763 = LINE('',#12764,#12765);+#12764 = CARTESIAN_POINT('',(1.,0.));+#12765 = VECTOR('',#12766,1.);+#12766 = DIRECTION('',(0.,-1.));+#12767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12768 = ORIENTED_EDGE('',*,*,#12769,.T.);+#12769 = EDGE_CURVE('',#12747,#12770,#12772,.T.);+#12770 = VERTEX_POINT('',#12771);+#12771 = CARTESIAN_POINT('',(-8.685891577137E-02,-5.618884241049E-02,+ 1.1500001));+#12772 = SURFACE_CURVE('',#12773,(#12777,#12784),.PCURVE_S1.);+#12773 = LINE('',#12774,#12775);+#12774 = CARTESIAN_POINT('',(-6.284591259735E-02,-5.618884241049E-02,+ 1.1500001));+#12775 = VECTOR('',#12776,1.);+#12776 = DIRECTION('',(-1.,0.,0.));+#12777 = PCURVE('',#3577,#12778);+#12778 = DEFINITIONAL_REPRESENTATION('',(#12779),#12783);+#12779 = LINE('',#12780,#12781);+#12780 = CARTESIAN_POINT('',(0.,-0.1));+#12781 = VECTOR('',#12782,1.);+#12782 = DIRECTION('',(1.,0.));+#12783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12784 = PCURVE('',#12785,#12790);+#12785 = PLANE('',#12786);+#12786 = AXIS2_PLACEMENT_3D('',#12787,#12788,#12789);+#12787 = CARTESIAN_POINT('',(-9.771628024279E-02,-5.618884241049E-02,+ 1.1500001));+#12788 = DIRECTION('',(0.,0.,1.));+#12789 = DIRECTION('',(1.,0.,0.));+#12790 = DEFINITIONAL_REPRESENTATION('',(#12791),#12795);+#12791 = LINE('',#12792,#12793);+#12792 = CARTESIAN_POINT('',(3.487036764544E-02,0.));+#12793 = VECTOR('',#12794,1.);+#12794 = DIRECTION('',(-1.,0.));+#12795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12796 = ORIENTED_EDGE('',*,*,#12797,.F.);+#12797 = EDGE_CURVE('',#3364,#12770,#12798,.T.);+#12798 = SURFACE_CURVE('',#12799,(#12803,#12810),.PCURVE_S1.);+#12799 = LINE('',#12800,#12801);+#12800 = CARTESIAN_POINT('',(-8.685891577137E-02,-5.618884241049E-02,+ 1.2500001));+#12801 = VECTOR('',#12802,1.);+#12802 = DIRECTION('',(-0.,-0.,-1.));+#12803 = PCURVE('',#3577,#12804);+#12804 = DEFINITIONAL_REPRESENTATION('',(#12805),#12809);+#12805 = LINE('',#12806,#12807);+#12806 = CARTESIAN_POINT('',(2.401300317402E-02,0.));+#12807 = VECTOR('',#12808,1.);+#12808 = DIRECTION('',(0.,-1.));+#12809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12810 = PCURVE('',#3381,#12811);+#12811 = DEFINITIONAL_REPRESENTATION('',(#12812),#12816);+#12812 = LINE('',#12813,#12814);+#12813 = CARTESIAN_POINT('',(0.,0.));+#12814 = VECTOR('',#12815,1.);+#12815 = DIRECTION('',(0.,-1.));+#12816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12817 = ADVANCED_FACE('',(#12818,#12957),#12785,.T.);+#12818 = FACE_BOUND('',#12819,.F.);+#12819 = EDGE_LOOP('',(#12820,#12845,#12868,#12891,#12914,#12935,#12936)+ );+#12820 = ORIENTED_EDGE('',*,*,#12821,.T.);+#12821 = EDGE_CURVE('',#12822,#12824,#12826,.T.);+#12822 = VERTEX_POINT('',#12823);+#12823 = CARTESIAN_POINT('',(-8.685891577137E-02,6.213265507733E-02,+ 1.1500001));+#12824 = VERTEX_POINT('',#12825);+#12825 = CARTESIAN_POINT('',(-6.284591259735E-02,6.213265507733E-02,+ 1.1500001));+#12826 = SURFACE_CURVE('',#12827,(#12831,#12838),.PCURVE_S1.);+#12827 = LINE('',#12828,#12829);+#12828 = CARTESIAN_POINT('',(-8.685891577137E-02,6.213265507733E-02,+ 1.1500001));+#12829 = VECTOR('',#12830,1.);+#12830 = DIRECTION('',(1.,0.,0.));+#12831 = PCURVE('',#12785,#12832);+#12832 = DEFINITIONAL_REPRESENTATION('',(#12833),#12837);+#12833 = LINE('',#12834,#12835);+#12834 = CARTESIAN_POINT('',(1.085736447142E-02,0.118321497488));+#12835 = VECTOR('',#12836,1.);+#12836 = DIRECTION('',(1.,0.));+#12837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12838 = PCURVE('',#3408,#12839);+#12839 = DEFINITIONAL_REPRESENTATION('',(#12840),#12844);+#12840 = LINE('',#12841,#12842);+#12841 = CARTESIAN_POINT('',(0.,-0.1));+#12842 = VECTOR('',#12843,1.);+#12843 = DIRECTION('',(1.,0.));+#12844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12845 = ORIENTED_EDGE('',*,*,#12846,.T.);+#12846 = EDGE_CURVE('',#12824,#12847,#12849,.T.);+#12847 = VERTEX_POINT('',#12848);+#12848 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,+ 1.1500001));+#12849 = SURFACE_CURVE('',#12850,(#12854,#12861),.PCURVE_S1.);+#12850 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12851,#12852,#12853),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12851 = CARTESIAN_POINT('',(-6.284591259735E-02,6.213265507733E-02,+ 1.1500001));+#12852 = CARTESIAN_POINT('',(-3.574212683658E-02,6.213265507733E-02,+ 1.1500001));+#12853 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,+ 1.1500001));+#12854 = PCURVE('',#12785,#12855);+#12855 = DEFINITIONAL_REPRESENTATION('',(#12856),#12860);+#12856 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12857,#12858,#12859),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12857 = CARTESIAN_POINT('',(3.487036764544E-02,0.118321497488));+#12858 = CARTESIAN_POINT('',(6.197415340622E-02,0.118321497488));+#12859 = CARTESIAN_POINT('',(7.481278876658E-02,0.103897845416));+#12860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12861 = PCURVE('',#3439,#12862);+#12862 = DEFINITIONAL_REPRESENTATION('',(#12863),#12867);+#12863 = LINE('',#12864,#12865);+#12864 = CARTESIAN_POINT('',(0.,-0.1));+#12865 = VECTOR('',#12866,1.);+#12866 = DIRECTION('',(1.,0.));+#12867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12868 = ORIENTED_EDGE('',*,*,#12869,.T.);+#12869 = EDGE_CURVE('',#12847,#12870,#12872,.T.);+#12870 = VERTEX_POINT('',#12871);+#12871 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,+ 1.1500001));+#12872 = SURFACE_CURVE('',#12873,(#12877,#12884),.PCURVE_S1.);+#12873 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12874,#12875,#12876),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12874 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,+ 1.1500001));+#12875 = CARTESIAN_POINT('',(-1.006485611584E-02,3.328535093428E-02,+ 1.1500001));+#12876 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,+ 1.1500001));+#12877 = PCURVE('',#12785,#12878);+#12878 = DEFINITIONAL_REPRESENTATION('',(#12879),#12883);+#12879 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12880,#12881,#12882),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12880 = CARTESIAN_POINT('',(7.481278876658E-02,0.103897845416));+#12881 = CARTESIAN_POINT('',(8.765142412695E-02,8.947419334478E-02));+#12882 = CARTESIAN_POINT('',(8.765142412695E-02,5.904187249058E-02));+#12883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12884 = PCURVE('',#3475,#12885);+#12885 = DEFINITIONAL_REPRESENTATION('',(#12886),#12890);+#12886 = LINE('',#12887,#12888);+#12887 = CARTESIAN_POINT('',(0.,-0.1));+#12888 = VECTOR('',#12889,1.);+#12889 = DIRECTION('',(1.,0.));+#12890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12891 = ORIENTED_EDGE('',*,*,#12892,.T.);+#12892 = EDGE_CURVE('',#12870,#12893,#12895,.T.);+#12893 = VERTEX_POINT('',#12894);+#12894 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,+ 1.1500001));+#12895 = SURFACE_CURVE('',#12896,(#12900,#12907),.PCURVE_S1.);+#12896 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12897,#12898,#12899),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12897 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,+ 1.1500001));+#12898 = CARTESIAN_POINT('',(-1.006485611584E-02,-2.742078910301E-02,+ 1.1500001));+#12899 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,+ 1.1500001));+#12900 = PCURVE('',#12785,#12901);+#12901 = DEFINITIONAL_REPRESENTATION('',(#12902),#12906);+#12902 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12903,#12904,#12905),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12903 = CARTESIAN_POINT('',(8.765142412695E-02,5.904187249058E-02));+#12904 = CARTESIAN_POINT('',(8.765142412695E-02,2.876805330749E-02));+#12905 = CARTESIAN_POINT('',(7.481278876658E-02,1.438402665374E-02));+#12906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12907 = PCURVE('',#3511,#12908);+#12908 = DEFINITIONAL_REPRESENTATION('',(#12909),#12913);+#12909 = LINE('',#12910,#12911);+#12910 = CARTESIAN_POINT('',(0.,-0.1));+#12911 = VECTOR('',#12912,1.);+#12912 = DIRECTION('',(1.,0.));+#12913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12914 = ORIENTED_EDGE('',*,*,#12915,.T.);+#12915 = EDGE_CURVE('',#12893,#12747,#12916,.T.);+#12916 = SURFACE_CURVE('',#12917,(#12921,#12928),.PCURVE_S1.);+#12917 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12918,#12919,#12920),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12918 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,+ 1.1500001));+#12919 = CARTESIAN_POINT('',(-3.574212683658E-02,-5.618884241049E-02,+ 1.1500001));+#12920 = CARTESIAN_POINT('',(-6.284591259735E-02,-5.618884241049E-02,+ 1.1500001));+#12921 = PCURVE('',#12785,#12922);+#12922 = DEFINITIONAL_REPRESENTATION('',(#12923),#12927);+#12923 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12924,#12925,#12926),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12924 = CARTESIAN_POINT('',(7.481278876658E-02,1.438402665374E-02));+#12925 = CARTESIAN_POINT('',(6.197415340622E-02,0.));+#12926 = CARTESIAN_POINT('',(3.487036764544E-02,0.));+#12927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12928 = PCURVE('',#3547,#12929);+#12929 = DEFINITIONAL_REPRESENTATION('',(#12930),#12934);+#12930 = LINE('',#12931,#12932);+#12931 = CARTESIAN_POINT('',(0.,-0.1));+#12932 = VECTOR('',#12933,1.);+#12933 = DIRECTION('',(1.,0.));+#12934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12935 = ORIENTED_EDGE('',*,*,#12769,.T.);+#12936 = ORIENTED_EDGE('',*,*,#12937,.T.);+#12937 = EDGE_CURVE('',#12770,#12822,#12938,.T.);+#12938 = SURFACE_CURVE('',#12939,(#12943,#12950),.PCURVE_S1.);+#12939 = LINE('',#12940,#12941);+#12940 = CARTESIAN_POINT('',(-8.685891577137E-02,-5.618884241049E-02,+ 1.1500001));+#12941 = VECTOR('',#12942,1.);+#12942 = DIRECTION('',(0.,1.,0.));+#12943 = PCURVE('',#12785,#12944);+#12944 = DEFINITIONAL_REPRESENTATION('',(#12945),#12949);+#12945 = LINE('',#12946,#12947);+#12946 = CARTESIAN_POINT('',(1.085736447142E-02,0.));+#12947 = VECTOR('',#12948,1.);+#12948 = DIRECTION('',(0.,1.));+#12949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12950 = PCURVE('',#3381,#12951);+#12951 = DEFINITIONAL_REPRESENTATION('',(#12952),#12956);+#12952 = LINE('',#12953,#12954);+#12953 = CARTESIAN_POINT('',(0.,-0.1));+#12954 = VECTOR('',#12955,1.);+#12955 = DIRECTION('',(1.,0.));+#12956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12957 = FACE_BOUND('',#12958,.F.);+#12958 = EDGE_LOOP('',(#12959,#12989,#13019,#13049,#13079,#13109,#13137)+ );+#12959 = ORIENTED_EDGE('',*,*,#12960,.T.);+#12960 = EDGE_CURVE('',#12961,#12963,#12965,.T.);+#12961 = VERTEX_POINT('',#12962);+#12962 = CARTESIAN_POINT('',(-7.077099615313E-02,-4.30332037079E-02,+ 1.1500001));+#12963 = VERTEX_POINT('',#12964);+#12964 = CARTESIAN_POINT('',(-6.316291593958E-02,-4.30332037079E-02,+ 1.1500001));+#12965 = SURFACE_CURVE('',#12966,(#12970,#12977),.PCURVE_S1.);+#12966 = LINE('',#12967,#12968);+#12967 = CARTESIAN_POINT('',(-7.077099615313E-02,-4.30332037079E-02,+ 1.1500001));+#12968 = VECTOR('',#12969,1.);+#12969 = DIRECTION('',(1.,0.,0.));+#12970 = PCURVE('',#12785,#12971);+#12971 = DEFINITIONAL_REPRESENTATION('',(#12972),#12976);+#12972 = LINE('',#12973,#12974);+#12973 = CARTESIAN_POINT('',(2.694528408966E-02,1.31556387026E-02));+#12974 = VECTOR('',#12975,1.);+#12975 = DIRECTION('',(1.,0.));+#12976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12977 = PCURVE('',#12978,#12983);+#12978 = PLANE('',#12979);+#12979 = AXIS2_PLACEMENT_3D('',#12980,#12981,#12982);+#12980 = CARTESIAN_POINT('',(-7.077099615313E-02,-4.30332037079E-02,+ 1.2500001));+#12981 = DIRECTION('',(0.,-1.,0.));+#12982 = DIRECTION('',(1.,0.,0.));+#12983 = DEFINITIONAL_REPRESENTATION('',(#12984),#12988);+#12984 = LINE('',#12985,#12986);+#12985 = CARTESIAN_POINT('',(0.,-0.1));+#12986 = VECTOR('',#12987,1.);+#12987 = DIRECTION('',(1.,0.));+#12988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12989 = ORIENTED_EDGE('',*,*,#12990,.T.);+#12990 = EDGE_CURVE('',#12963,#12991,#12993,.T.);+#12991 = VERTEX_POINT('',#12992);+#12992 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,+ 1.1500001));+#12993 = SURFACE_CURVE('',#12994,(#12998,#13005),.PCURVE_S1.);+#12994 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12995,#12996,#12997),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12995 = CARTESIAN_POINT('',(-6.316291593958E-02,-4.30332037079E-02,+ 1.1500001));+#12996 = CARTESIAN_POINT('',(-4.295395287234E-02,-4.30332037079E-02,+ 1.1500001));+#12997 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,+ 1.1500001));+#12998 = PCURVE('',#12785,#12999);+#12999 = DEFINITIONAL_REPRESENTATION('',(#13000),#13004);+#13000 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13001,#13002,#13003),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13001 = CARTESIAN_POINT('',(3.455336430321E-02,1.31556387026E-02));+#13002 = CARTESIAN_POINT('',(5.476232737045E-02,1.31556387026E-02));+#13003 = CARTESIAN_POINT('',(6.276666176179E-02,2.31016185651E-02));+#13004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13005 = PCURVE('',#13006,#13013);+#13006 = SURFACE_OF_LINEAR_EXTRUSION('',#13007,#13011);+#13007 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13008,#13009,#13010),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13008 = CARTESIAN_POINT('',(-6.316291593958E-02,-4.30332037079E-02,+ 1.2500001));+#13009 = CARTESIAN_POINT('',(-4.295395287234E-02,-4.30332037079E-02,+ 1.2500001));+#13010 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,+ 1.2500001));+#13011 = VECTOR('',#13012,1.);+#13012 = DIRECTION('',(0.,0.,1.));+#13013 = DEFINITIONAL_REPRESENTATION('',(#13014),#13018);+#13014 = LINE('',#13015,#13016);+#13015 = CARTESIAN_POINT('',(0.,-0.1));+#13016 = VECTOR('',#13017,1.);+#13017 = DIRECTION('',(1.,0.));+#13018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13019 = ORIENTED_EDGE('',*,*,#13020,.T.);+#13020 = EDGE_CURVE('',#12991,#13021,#13023,.T.);+#13021 = VERTEX_POINT('',#13022);+#13022 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,+ 1.1500001));+#13023 = SURFACE_CURVE('',#13024,(#13028,#13035),.PCURVE_S1.);+#13024 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13025,#13026,#13027),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13025 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,+ 1.1500001));+#13026 = CARTESIAN_POINT('',(-2.694528408966E-02,-2.314124398288E-02,+ 1.1500001));+#13027 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,+ 1.1500001));+#13028 = PCURVE('',#12785,#13029);+#13029 = DEFINITIONAL_REPRESENTATION('',(#13030),#13034);+#13030 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13031,#13032,#13033),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13031 = CARTESIAN_POINT('',(6.276666176179E-02,2.31016185651E-02));+#13032 = CARTESIAN_POINT('',(7.077099615313E-02,3.304759842761E-02));+#13033 = CARTESIAN_POINT('',(7.077099615313E-02,5.904187249058E-02));+#13034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13035 = PCURVE('',#13036,#13043);+#13036 = SURFACE_OF_LINEAR_EXTRUSION('',#13037,#13041);+#13037 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13038,#13039,#13040),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13038 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,+ 1.2500001));+#13039 = CARTESIAN_POINT('',(-2.694528408966E-02,-2.314124398288E-02,+ 1.2500001));+#13040 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,+ 1.2500001));+#13041 = VECTOR('',#13042,1.);+#13042 = DIRECTION('',(0.,0.,1.));+#13043 = DEFINITIONAL_REPRESENTATION('',(#13044),#13048);+#13044 = LINE('',#13045,#13046);+#13045 = CARTESIAN_POINT('',(0.,-0.1));+#13046 = VECTOR('',#13047,1.);+#13047 = DIRECTION('',(1.,0.));+#13048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13049 = ORIENTED_EDGE('',*,*,#13050,.T.);+#13050 = EDGE_CURVE('',#13021,#13051,#13053,.T.);+#13051 = VERTEX_POINT('',#13052);+#13052 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,+ 1.1500001));+#13053 = SURFACE_CURVE('',#13054,(#13058,#13065),.PCURVE_S1.);+#13054 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13055,#13056,#13057),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13055 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,+ 1.1500001));+#13056 = CARTESIAN_POINT('',(-2.694528408966E-02,2.908505664972E-02,+ 1.1500001));+#13057 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,+ 1.1500001));+#13058 = PCURVE('',#12785,#13059);+#13059 = DEFINITIONAL_REPRESENTATION('',(#13060),#13064);+#13060 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13061,#13062,#13063),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13061 = CARTESIAN_POINT('',(7.077099615313E-02,5.904187249058E-02));+#13062 = CARTESIAN_POINT('',(7.077099615313E-02,8.527389906022E-02));+#13063 = CARTESIAN_POINT('',(6.280628717957E-02,9.521987892272E-02));+#13064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13065 = PCURVE('',#13066,#13073);+#13066 = SURFACE_OF_LINEAR_EXTRUSION('',#13067,#13071);+#13067 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13068,#13069,#13070),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13068 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,+ 1.2500001));+#13069 = CARTESIAN_POINT('',(-2.694528408966E-02,2.908505664972E-02,+ 1.2500001));+#13070 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,+ 1.2500001));+#13071 = VECTOR('',#13072,1.);+#13072 = DIRECTION('',(0.,0.,1.));+#13073 = DEFINITIONAL_REPRESENTATION('',(#13074),#13078);+#13074 = LINE('',#13075,#13076);+#13075 = CARTESIAN_POINT('',(0.,-0.1));+#13076 = VECTOR('',#13077,1.);+#13077 = DIRECTION('',(1.,0.));+#13078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13079 = ORIENTED_EDGE('',*,*,#13080,.T.);+#13080 = EDGE_CURVE('',#13051,#13081,#13083,.T.);+#13081 = VERTEX_POINT('',#13082);+#13082 = CARTESIAN_POINT('',(-6.316291593958E-02,4.897701637473E-02,+ 1.1500001));+#13083 = SURFACE_CURVE('',#13084,(#13088,#13095),.PCURVE_S1.);+#13084 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13085,#13086,#13087),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13085 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,+ 1.1500001));+#13086 = CARTESIAN_POINT('',(-4.287470203678E-02,4.897701637473E-02,+ 1.1500001));+#13087 = CARTESIAN_POINT('',(-6.316291593958E-02,4.897701637473E-02,+ 1.1500001));+#13088 = PCURVE('',#12785,#13089);+#13089 = DEFINITIONAL_REPRESENTATION('',(#13090),#13094);+#13090 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13091,#13092,#13093),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13091 = CARTESIAN_POINT('',(6.280628717957E-02,9.521987892272E-02));+#13092 = CARTESIAN_POINT('',(5.484157820601E-02,0.105165858785));+#13093 = CARTESIAN_POINT('',(3.455336430321E-02,0.105165858785));+#13094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13095 = PCURVE('',#13096,#13103);+#13096 = SURFACE_OF_LINEAR_EXTRUSION('',#13097,#13101);+#13097 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13098,#13099,#13100),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13098 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,+ 1.2500001));+#13099 = CARTESIAN_POINT('',(-4.287470203678E-02,4.897701637473E-02,+ 1.2500001));+#13100 = CARTESIAN_POINT('',(-6.316291593958E-02,4.897701637473E-02,+ 1.2500001));+#13101 = VECTOR('',#13102,1.);+#13102 = DIRECTION('',(0.,0.,1.));+#13103 = DEFINITIONAL_REPRESENTATION('',(#13104),#13108);+#13104 = LINE('',#13105,#13106);+#13105 = CARTESIAN_POINT('',(0.,-0.1));+#13106 = VECTOR('',#13107,1.);+#13107 = DIRECTION('',(1.,0.));+#13108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13109 = ORIENTED_EDGE('',*,*,#13110,.T.);+#13110 = EDGE_CURVE('',#13081,#13111,#13113,.T.);+#13111 = VERTEX_POINT('',#13112);+#13112 = CARTESIAN_POINT('',(-7.077099615313E-02,4.897701637473E-02,+ 1.1500001));+#13113 = SURFACE_CURVE('',#13114,(#13118,#13125),.PCURVE_S1.);+#13114 = LINE('',#13115,#13116);+#13115 = CARTESIAN_POINT('',(-6.316291593958E-02,4.897701637473E-02,+ 1.1500001));+#13116 = VECTOR('',#13117,1.);+#13117 = DIRECTION('',(-1.,0.,0.));+#13118 = PCURVE('',#12785,#13119);+#13119 = DEFINITIONAL_REPRESENTATION('',(#13120),#13124);+#13120 = LINE('',#13121,#13122);+#13121 = CARTESIAN_POINT('',(3.455336430321E-02,0.105165858785));+#13122 = VECTOR('',#13123,1.);+#13123 = DIRECTION('',(-1.,0.));+#13124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13125 = PCURVE('',#13126,#13131);+#13126 = PLANE('',#13127);+#13127 = AXIS2_PLACEMENT_3D('',#13128,#13129,#13130);+#13128 = CARTESIAN_POINT('',(-6.316291593958E-02,4.897701637473E-02,+ 1.2500001));+#13129 = DIRECTION('',(0.,1.,0.));+#13130 = DIRECTION('',(-1.,0.,0.));+#13131 = DEFINITIONAL_REPRESENTATION('',(#13132),#13136);+#13132 = LINE('',#13133,#13134);+#13133 = CARTESIAN_POINT('',(0.,-0.1));+#13134 = VECTOR('',#13135,1.);+#13135 = DIRECTION('',(1.,0.));+#13136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13137 = ORIENTED_EDGE('',*,*,#13138,.T.);+#13138 = EDGE_CURVE('',#13111,#12961,#13139,.T.);+#13139 = SURFACE_CURVE('',#13140,(#13144,#13151),.PCURVE_S1.);+#13140 = LINE('',#13141,#13142);+#13141 = CARTESIAN_POINT('',(-7.077099615313E-02,4.897701637473E-02,+ 1.1500001));+#13142 = VECTOR('',#13143,1.);+#13143 = DIRECTION('',(0.,-1.,0.));+#13144 = PCURVE('',#12785,#13145);+#13145 = DEFINITIONAL_REPRESENTATION('',(#13146),#13150);+#13146 = LINE('',#13147,#13148);+#13147 = CARTESIAN_POINT('',(2.694528408966E-02,0.105165858785));+#13148 = VECTOR('',#13149,1.);+#13149 = DIRECTION('',(0.,-1.));+#13150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13151 = PCURVE('',#13152,#13157);+#13152 = PLANE('',#13153);+#13153 = AXIS2_PLACEMENT_3D('',#13154,#13155,#13156);+#13154 = CARTESIAN_POINT('',(-7.077099615313E-02,4.897701637473E-02,+ 1.2500001));+#13155 = DIRECTION('',(-1.,0.,0.));+#13156 = DIRECTION('',(0.,-1.,0.));+#13157 = DEFINITIONAL_REPRESENTATION('',(#13158),#13162);+#13158 = LINE('',#13159,#13160);+#13159 = CARTESIAN_POINT('',(0.,-0.1));+#13160 = VECTOR('',#13161,1.);+#13161 = DIRECTION('',(1.,0.));+#13162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13163 = ADVANCED_FACE('',(#13164),#13152,.T.);+#13164 = FACE_BOUND('',#13165,.T.);+#13165 = EDGE_LOOP('',(#13166,#13194,#13215,#13216));+#13166 = ORIENTED_EDGE('',*,*,#13167,.F.);+#13167 = EDGE_CURVE('',#13168,#13170,#13172,.T.);+#13168 = VERTEX_POINT('',#13169);+#13169 = CARTESIAN_POINT('',(-7.077099615313E-02,4.897701637473E-02,1.2)+ );+#13170 = VERTEX_POINT('',#13171);+#13171 = CARTESIAN_POINT('',(-7.077099615313E-02,-4.30332037079E-02,1.2)+ );+#13172 = SURFACE_CURVE('',#13173,(#13177,#13183),.PCURVE_S1.);+#13173 = LINE('',#13174,#13175);+#13174 = CARTESIAN_POINT('',(-7.077099615313E-02,0.703610059945,1.2));+#13175 = VECTOR('',#13176,1.);+#13176 = DIRECTION('',(0.,-1.,0.));+#13177 = PCURVE('',#13152,#13178);+#13178 = DEFINITIONAL_REPRESENTATION('',(#13179),#13182);+#13179 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13180,#13181),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.654633043571,0.746643263653),+ .PIECEWISE_BEZIER_KNOTS.);+#13180 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13181 = CARTESIAN_POINT('',(9.201022008263E-02,-5.00001E-02));+#13182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13183 = PCURVE('',#13184,#13189);+#13184 = PLANE('',#13185);+#13185 = AXIS2_PLACEMENT_3D('',#13186,#13187,#13188);+#13186 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#13187 = DIRECTION('',(0.,0.,1.));+#13188 = DIRECTION('',(0.43658423493,-0.899663384723,0.));+#13189 = DEFINITIONAL_REPRESENTATION('',(#13190),#13193);+#13190 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13191,#13192),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.654633043571,0.746643263653),+ .PIECEWISE_BEZIER_KNOTS.);+#13191 = CARTESIAN_POINT('',(1.434763336649,-4.228748071585E-02));+#13192 = CARTESIAN_POINT('',(1.517541562678,-8.245769225638E-02));+#13193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13194 = ORIENTED_EDGE('',*,*,#13195,.T.);+#13195 = EDGE_CURVE('',#13168,#13111,#13196,.T.);+#13196 = SURFACE_CURVE('',#13197,(#13201,#13208),.PCURVE_S1.);+#13197 = LINE('',#13198,#13199);+#13198 = CARTESIAN_POINT('',(-7.077099615313E-02,4.897701637473E-02,+ 1.2500001));+#13199 = VECTOR('',#13200,1.);+#13200 = DIRECTION('',(-0.,-0.,-1.));+#13201 = PCURVE('',#13152,#13202);+#13202 = DEFINITIONAL_REPRESENTATION('',(#13203),#13207);+#13203 = LINE('',#13204,#13205);+#13204 = CARTESIAN_POINT('',(0.,0.));+#13205 = VECTOR('',#13206,1.);+#13206 = DIRECTION('',(0.,-1.));+#13207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13208 = PCURVE('',#13126,#13209);+#13209 = DEFINITIONAL_REPRESENTATION('',(#13210),#13214);+#13210 = LINE('',#13211,#13212);+#13211 = CARTESIAN_POINT('',(7.608080213551E-03,0.));+#13212 = VECTOR('',#13213,1.);+#13213 = DIRECTION('',(0.,-1.));+#13214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13215 = ORIENTED_EDGE('',*,*,#13138,.T.);+#13216 = ORIENTED_EDGE('',*,*,#13217,.F.);+#13217 = EDGE_CURVE('',#13170,#12961,#13218,.T.);+#13218 = SURFACE_CURVE('',#13219,(#13223,#13230),.PCURVE_S1.);+#13219 = LINE('',#13220,#13221);+#13220 = CARTESIAN_POINT('',(-7.077099615313E-02,-4.30332037079E-02,+ 1.2500001));+#13221 = VECTOR('',#13222,1.);+#13222 = DIRECTION('',(-0.,-0.,-1.));+#13223 = PCURVE('',#13152,#13224);+#13224 = DEFINITIONAL_REPRESENTATION('',(#13225),#13229);+#13225 = LINE('',#13226,#13227);+#13226 = CARTESIAN_POINT('',(9.201022008263E-02,0.));+#13227 = VECTOR('',#13228,1.);+#13228 = DIRECTION('',(0.,-1.));+#13229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13230 = PCURVE('',#12978,#13231);+#13231 = DEFINITIONAL_REPRESENTATION('',(#13232),#13236);+#13232 = LINE('',#13233,#13234);+#13233 = CARTESIAN_POINT('',(0.,0.));+#13234 = VECTOR('',#13235,1.);+#13235 = DIRECTION('',(0.,-1.));+#13236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13237 = ADVANCED_FACE('',(#13238),#13184,.T.);+#13238 = FACE_BOUND('',#13239,.T.);+#13239 = EDGE_LOOP('',(#13240,#13241,#13262,#13291,#13320,#13349,#13378)+ );+#13240 = ORIENTED_EDGE('',*,*,#13167,.T.);+#13241 = ORIENTED_EDGE('',*,*,#13242,.T.);+#13242 = EDGE_CURVE('',#13170,#13243,#13245,.T.);+#13243 = VERTEX_POINT('',#13244);+#13244 = CARTESIAN_POINT('',(-6.316291593958E-02,-4.30332037079E-02,1.2)+ );+#13245 = SURFACE_CURVE('',#13246,(#13250,#13256),.PCURVE_S1.);+#13246 = LINE('',#13247,#13248);+#13247 = CARTESIAN_POINT('',(-0.364946273956,-4.30332037079E-02,1.2));+#13248 = VECTOR('',#13249,1.);+#13249 = DIRECTION('',(1.,0.,-0.));+#13250 = PCURVE('',#13184,#13251);+#13251 = DEFINITIONAL_REPRESENTATION('',(#13252),#13255);+#13252 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13253,#13254),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.294175277802,0.301783358016),+ .PIECEWISE_BEZIER_KNOTS.);+#13253 = CARTESIAN_POINT('',(1.517541562678,-8.245769225638E-02));+#13254 = CARTESIAN_POINT('',(1.520863130557,-7.561298106022E-02));+#13255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13256 = PCURVE('',#12978,#13257);+#13257 = DEFINITIONAL_REPRESENTATION('',(#13258),#13261);+#13258 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13259,#13260),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.294175277802,0.301783358016),+ .PIECEWISE_BEZIER_KNOTS.);+#13259 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13260 = CARTESIAN_POINT('',(7.608080213551E-03,-5.00001E-02));+#13261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13262 = ORIENTED_EDGE('',*,*,#13263,.F.);+#13263 = EDGE_CURVE('',#13264,#13243,#13266,.T.);+#13264 = VERTEX_POINT('',#13265);+#13265 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,1.2)+ );+#13266 = SURFACE_CURVE('',#13267,(#13273,#13282),.PCURVE_S1.);+#13267 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13268,#13269,#13270,#13271,+ #13272),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13268 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,1.2)+ );+#13269 = CARTESIAN_POINT('',(-3.895243661389E-02,-3.806102261448E-02,1.2+ ));+#13270 = CARTESIAN_POINT('',(-4.499002862899E-02,-4.137662674769E-02,1.2+ ));+#13271 = CARTESIAN_POINT('',(-5.306174436351E-02,-4.30332037079E-02,1.2)+ );+#13272 = CARTESIAN_POINT('',(-6.316291593958E-02,-4.30332037079E-02,1.2)+ );+#13273 = PCURVE('',#13184,#13274);+#13274 = DEFINITIONAL_REPRESENTATION('',(#13275),#13281);+#13275 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13276,#13277,#13278,#13279,+ #13280),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13276 = CARTESIAN_POINT('',(1.524232577536,-4.588825236554E-02));+#13277 = CARTESIAN_POINT('',(1.526959754879,-5.166092340571E-02));+#13278 = CARTESIAN_POINT('',(1.527306765025,-5.854026436742E-02));+#13279 = CARTESIAN_POINT('',(1.525273142822,-6.652532685043E-02));+#13280 = CARTESIAN_POINT('',(1.520863130557,-7.561298106022E-02));+#13281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13282 = PCURVE('',#13006,#13283);+#13283 = DEFINITIONAL_REPRESENTATION('',(#13284),#13290);+#13284 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13285,#13286,#13287,#13288,+ #13289),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13285 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13286 = CARTESIAN_POINT('',(0.749959338454,-5.00001E-02));+#13287 = CARTESIAN_POINT('',(0.499918253386,-5.00001E-02));+#13288 = CARTESIAN_POINT('',(0.249918106695,-5.00001E-02));+#13289 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13291 = ORIENTED_EDGE('',*,*,#13292,.F.);+#13292 = EDGE_CURVE('',#13293,#13264,#13295,.T.);+#13293 = VERTEX_POINT('',#13294);+#13294 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,1.2)+ );+#13295 = SURFACE_CURVE('',#13296,(#13302,#13311),.PCURVE_S1.);+#13296 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13297,#13298,#13299,#13300,+ #13301),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13297 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,1.2)+ );+#13298 = CARTESIAN_POINT('',(-2.694528408966E-02,-1.013606828582E-02,1.2+ ));+#13299 = CARTESIAN_POINT('',(-2.827768899883E-02,-2.046096279454E-02,1.2+ ));+#13300 = CARTESIAN_POINT('',(-3.09458300145E-02,-2.811221936474E-02,1.2)+ );+#13301 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,1.2)+ );+#13302 = PCURVE('',#13184,#13303);+#13303 = DEFINITIONAL_REPRESENTATION('',(#13304),#13310);+#13304 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13305,#13306,#13307,#13308,+ #13309),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13305 = CARTESIAN_POINT('',(1.495393013248,-2.299609753133E-02));+#13306 = CARTESIAN_POINT('',(1.507078829448,-2.866693310384E-02));+#13307 = CARTESIAN_POINT('',(1.515786052011,-3.437333518407E-02));+#13308 = CARTESIAN_POINT('',(1.52150473909,-4.01141819571E-02));+#13309 = CARTESIAN_POINT('',(1.524232577536,-4.588825236554E-02));+#13310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13311 = PCURVE('',#13036,#13312);+#13312 = DEFINITIONAL_REPRESENTATION('',(#13313),#13319);+#13313 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13314,#13315,#13316,#13317,+ #13318),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13314 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13315 = CARTESIAN_POINT('',(0.750154623775,-5.00001E-02));+#13316 = CARTESIAN_POINT('',(0.50017071656,-5.00001E-02));+#13317 = CARTESIAN_POINT('',(0.250101274556,-5.00001E-02));+#13318 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13320 = ORIENTED_EDGE('',*,*,#13321,.F.);+#13321 = EDGE_CURVE('',#13322,#13293,#13324,.T.);+#13322 = VERTEX_POINT('',#13323);+#13323 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,1.2)+ );+#13324 = SURFACE_CURVE('',#13325,(#13331,#13340),.PCURVE_S1.);+#13325 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13326,#13327,#13328,#13329,+ #13330),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13326 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,1.2)+ );+#13327 = CARTESIAN_POINT('',(-3.09259827802E-02,3.405597889512E-02,1.2)+ );+#13328 = CARTESIAN_POINT('',(-2.827105217804E-02,2.636497337759E-02,1.2)+ );+#13329 = CARTESIAN_POINT('',(-2.694528408966E-02,1.596072995923E-02,1.2)+ );+#13330 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,1.2)+ );+#13331 = PCURVE('',#13184,#13332);+#13332 = DEFINITIONAL_REPRESENTATION('',(#13333),#13339);+#13333 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13334,#13335,#13336,#13337,+ #13338),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13334 = CARTESIAN_POINT('',(1.459367719155,-1.436690730533E-02));+#13335 = CARTESIAN_POINT('',(1.465582952411,-1.295467085284E-02));+#13336 = CARTESIAN_POINT('',(1.473661369313,-1.392389876081E-02));+#13337 = CARTESIAN_POINT('',(1.483600495608,-1.72734824079E-02));+#13338 = CARTESIAN_POINT('',(1.495393013248,-2.299609753133E-02));+#13339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13340 = PCURVE('',#13066,#13341);+#13341 = DEFINITIONAL_REPRESENTATION('',(#13342),#13348);+#13342 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13343,#13344,#13345,#13346,+ #13347),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13343 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13344 = CARTESIAN_POINT('',(0.74989605419,-5.00001E-02));+#13345 = CARTESIAN_POINT('',(0.499824940229,-5.00001E-02));+#13346 = CARTESIAN_POINT('',(0.249841540918,-5.00001E-02));+#13347 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13349 = ORIENTED_EDGE('',*,*,#13350,.F.);+#13350 = EDGE_CURVE('',#13351,#13322,#13353,.T.);+#13351 = VERTEX_POINT('',#13352);+#13352 = CARTESIAN_POINT('',(-6.316291593958E-02,4.897701637473E-02,1.2)+ );+#13353 = SURFACE_CURVE('',#13354,(#13360,#13369),.PCURVE_S1.);+#13354 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13355,#13356,#13357,#13358,+ #13359),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13355 = CARTESIAN_POINT('',(-6.316291593958E-02,4.897701637473E-02,1.2)+ );+#13356 = CARTESIAN_POINT('',(-5.302218065853E-02,4.897701637473E-02,1.2)+ );+#13357 = CARTESIAN_POINT('',(-4.493062266172E-02,4.732045535095E-02,1.2)+ );+#13358 = CARTESIAN_POINT('',(-3.889300668512E-02,4.400484954255E-02,1.2)+ );+#13359 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,1.2)+ );+#13360 = PCURVE('',#13184,#13361);+#13361 = DEFINITIONAL_REPRESENTATION('',(#13362),#13368);+#13362 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13363,#13364,#13365,#13366,+ #13367),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13363 = CARTESIAN_POINT('',(1.438084904529,-3.544276951968E-02));+#13364 = CARTESIAN_POINT('',(1.442512189683,-2.631952129315E-02));+#13365 = CARTESIAN_POINT('',(1.447535183638,-1.976307126525E-02));+#13366 = CARTESIAN_POINT('',(1.453154040734,-1.577879046527E-02));+#13367 = CARTESIAN_POINT('',(1.459367719155,-1.436690730533E-02));+#13368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13369 = PCURVE('',#13096,#13370);+#13370 = DEFINITIONAL_REPRESENTATION('',(#13371),#13377);+#13371 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13372,#13373,#13374,#13375,+ #13376),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13372 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13373 = CARTESIAN_POINT('',(0.750083094312,-5.00001E-02));+#13374 = CARTESIAN_POINT('',(0.500083026485,-5.00001E-02));+#13375 = CARTESIAN_POINT('',(0.250041378481,-5.00001E-02));+#13376 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13378 = ORIENTED_EDGE('',*,*,#13379,.T.);+#13379 = EDGE_CURVE('',#13351,#13168,#13380,.T.);+#13380 = SURFACE_CURVE('',#13381,(#13385,#13391),.PCURVE_S1.);+#13381 = LINE('',#13382,#13383);+#13382 = CARTESIAN_POINT('',(-0.361142233849,4.897701637473E-02,1.2));+#13383 = VECTOR('',#13384,1.);+#13384 = DIRECTION('',(-1.,0.,0.));+#13385 = PCURVE('',#13184,#13386);+#13386 = DEFINITIONAL_REPRESENTATION('',(#13387),#13390);+#13387 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13388,#13389),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.297979317909,-0.290371237696),+ .PIECEWISE_BEZIER_KNOTS.);+#13388 = CARTESIAN_POINT('',(1.438084904529,-3.544276951968E-02));+#13389 = CARTESIAN_POINT('',(1.434763336649,-4.228748071585E-02));+#13390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13391 = PCURVE('',#13126,#13392);+#13392 = DEFINITIONAL_REPRESENTATION('',(#13393),#13396);+#13393 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13394,#13395),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.297979317909,-0.290371237696),+ .PIECEWISE_BEZIER_KNOTS.);+#13394 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13395 = CARTESIAN_POINT('',(7.608080213551E-03,-5.00001E-02));+#13396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13397 = ADVANCED_FACE('',(#13398),#13126,.T.);+#13398 = FACE_BOUND('',#13399,.T.);+#13399 = EDGE_LOOP('',(#13400,#13401,#13422,#13423));+#13400 = ORIENTED_EDGE('',*,*,#13379,.F.);+#13401 = ORIENTED_EDGE('',*,*,#13402,.T.);+#13402 = EDGE_CURVE('',#13351,#13081,#13403,.T.);+#13403 = SURFACE_CURVE('',#13404,(#13408,#13415),.PCURVE_S1.);+#13404 = LINE('',#13405,#13406);+#13405 = CARTESIAN_POINT('',(-6.316291593958E-02,4.897701637473E-02,+ 1.2500001));+#13406 = VECTOR('',#13407,1.);+#13407 = DIRECTION('',(-0.,-0.,-1.));+#13408 = PCURVE('',#13126,#13409);+#13409 = DEFINITIONAL_REPRESENTATION('',(#13410),#13414);+#13410 = LINE('',#13411,#13412);+#13411 = CARTESIAN_POINT('',(0.,0.));+#13412 = VECTOR('',#13413,1.);+#13413 = DIRECTION('',(0.,-1.));+#13414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13415 = PCURVE('',#13096,#13416);+#13416 = DEFINITIONAL_REPRESENTATION('',(#13417),#13421);+#13417 = LINE('',#13418,#13419);+#13418 = CARTESIAN_POINT('',(1.,0.));+#13419 = VECTOR('',#13420,1.);+#13420 = DIRECTION('',(0.,-1.));+#13421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13422 = ORIENTED_EDGE('',*,*,#13110,.T.);+#13423 = ORIENTED_EDGE('',*,*,#13195,.F.);+#13424 = ADVANCED_FACE('',(#13425),#13096,.T.);+#13425 = FACE_BOUND('',#13426,.T.);+#13426 = EDGE_LOOP('',(#13427,#13428,#13449,#13450));+#13427 = ORIENTED_EDGE('',*,*,#13350,.T.);+#13428 = ORIENTED_EDGE('',*,*,#13429,.T.);+#13429 = EDGE_CURVE('',#13322,#13051,#13430,.T.);+#13430 = SURFACE_CURVE('',#13431,(#13435,#13442),.PCURVE_S1.);+#13431 = LINE('',#13432,#13433);+#13432 = CARTESIAN_POINT('',(-3.490999306322E-02,3.903103651223E-02,+ 1.2500001));+#13433 = VECTOR('',#13434,1.);+#13434 = DIRECTION('',(-0.,-0.,-1.));+#13435 = PCURVE('',#13096,#13436);+#13436 = DEFINITIONAL_REPRESENTATION('',(#13437),#13441);+#13437 = LINE('',#13438,#13439);+#13438 = CARTESIAN_POINT('',(0.,0.));+#13439 = VECTOR('',#13440,1.);+#13440 = DIRECTION('',(0.,-1.));+#13441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13442 = PCURVE('',#13066,#13443);+#13443 = DEFINITIONAL_REPRESENTATION('',(#13444),#13448);+#13444 = LINE('',#13445,#13446);+#13445 = CARTESIAN_POINT('',(1.,0.));+#13446 = VECTOR('',#13447,1.);+#13447 = DIRECTION('',(0.,-1.));+#13448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13449 = ORIENTED_EDGE('',*,*,#13080,.T.);+#13450 = ORIENTED_EDGE('',*,*,#13402,.F.);+#13451 = ADVANCED_FACE('',(#13452),#13066,.T.);+#13452 = FACE_BOUND('',#13453,.T.);+#13453 = EDGE_LOOP('',(#13454,#13455,#13476,#13477));+#13454 = ORIENTED_EDGE('',*,*,#13321,.T.);+#13455 = ORIENTED_EDGE('',*,*,#13456,.T.);+#13456 = EDGE_CURVE('',#13293,#13021,#13457,.T.);+#13457 = SURFACE_CURVE('',#13458,(#13462,#13469),.PCURVE_S1.);+#13458 = LINE('',#13459,#13460);+#13459 = CARTESIAN_POINT('',(-2.694528408966E-02,2.853030080082E-03,+ 1.2500001));+#13460 = VECTOR('',#13461,1.);+#13461 = DIRECTION('',(-0.,-0.,-1.));+#13462 = PCURVE('',#13066,#13463);+#13463 = DEFINITIONAL_REPRESENTATION('',(#13464),#13468);+#13464 = LINE('',#13465,#13466);+#13465 = CARTESIAN_POINT('',(0.,0.));+#13466 = VECTOR('',#13467,1.);+#13467 = DIRECTION('',(0.,-1.));+#13468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13469 = PCURVE('',#13036,#13470);+#13470 = DEFINITIONAL_REPRESENTATION('',(#13471),#13475);+#13471 = LINE('',#13472,#13473);+#13472 = CARTESIAN_POINT('',(1.,0.));+#13473 = VECTOR('',#13474,1.);+#13474 = DIRECTION('',(0.,-1.));+#13475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13476 = ORIENTED_EDGE('',*,*,#13050,.T.);+#13477 = ORIENTED_EDGE('',*,*,#13429,.F.);+#13478 = ADVANCED_FACE('',(#13479),#13036,.T.);+#13479 = FACE_BOUND('',#13480,.T.);+#13480 = EDGE_LOOP('',(#13481,#13482,#13503,#13504));+#13481 = ORIENTED_EDGE('',*,*,#13292,.T.);+#13482 = ORIENTED_EDGE('',*,*,#13483,.T.);+#13483 = EDGE_CURVE('',#13264,#12991,#13484,.T.);+#13484 = SURFACE_CURVE('',#13485,(#13489,#13496),.PCURVE_S1.);+#13485 = LINE('',#13486,#13487);+#13486 = CARTESIAN_POINT('',(-3.4949618481E-02,-3.308722384539E-02,+ 1.2500001));+#13487 = VECTOR('',#13488,1.);+#13488 = DIRECTION('',(-0.,-0.,-1.));+#13489 = PCURVE('',#13036,#13490);+#13490 = DEFINITIONAL_REPRESENTATION('',(#13491),#13495);+#13491 = LINE('',#13492,#13493);+#13492 = CARTESIAN_POINT('',(0.,0.));+#13493 = VECTOR('',#13494,1.);+#13494 = DIRECTION('',(0.,-1.));+#13495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13496 = PCURVE('',#13006,#13497);+#13497 = DEFINITIONAL_REPRESENTATION('',(#13498),#13502);+#13498 = LINE('',#13499,#13500);+#13499 = CARTESIAN_POINT('',(1.,0.));+#13500 = VECTOR('',#13501,1.);+#13501 = DIRECTION('',(0.,-1.));+#13502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13503 = ORIENTED_EDGE('',*,*,#13020,.T.);+#13504 = ORIENTED_EDGE('',*,*,#13456,.F.);+#13505 = ADVANCED_FACE('',(#13506),#13006,.T.);+#13506 = FACE_BOUND('',#13507,.T.);+#13507 = EDGE_LOOP('',(#13508,#13509,#13530,#13531));+#13508 = ORIENTED_EDGE('',*,*,#13263,.T.);+#13509 = ORIENTED_EDGE('',*,*,#13510,.T.);+#13510 = EDGE_CURVE('',#13243,#12963,#13511,.T.);+#13511 = SURFACE_CURVE('',#13512,(#13516,#13523),.PCURVE_S1.);+#13512 = LINE('',#13513,#13514);+#13513 = CARTESIAN_POINT('',(-6.316291593958E-02,-4.30332037079E-02,+ 1.2500001));+#13514 = VECTOR('',#13515,1.);+#13515 = DIRECTION('',(-0.,-0.,-1.));+#13516 = PCURVE('',#13006,#13517);+#13517 = DEFINITIONAL_REPRESENTATION('',(#13518),#13522);+#13518 = LINE('',#13519,#13520);+#13519 = CARTESIAN_POINT('',(0.,0.));+#13520 = VECTOR('',#13521,1.);+#13521 = DIRECTION('',(0.,-1.));+#13522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13523 = PCURVE('',#12978,#13524);+#13524 = DEFINITIONAL_REPRESENTATION('',(#13525),#13529);+#13525 = LINE('',#13526,#13527);+#13526 = CARTESIAN_POINT('',(7.608080213551E-03,0.));+#13527 = VECTOR('',#13528,1.);+#13528 = DIRECTION('',(0.,-1.));+#13529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13530 = ORIENTED_EDGE('',*,*,#12990,.T.);+#13531 = ORIENTED_EDGE('',*,*,#13483,.F.);+#13532 = ADVANCED_FACE('',(#13533),#12978,.T.);+#13533 = FACE_BOUND('',#13534,.T.);+#13534 = EDGE_LOOP('',(#13535,#13536,#13537,#13538));+#13535 = ORIENTED_EDGE('',*,*,#13242,.F.);+#13536 = ORIENTED_EDGE('',*,*,#13217,.T.);+#13537 = ORIENTED_EDGE('',*,*,#12960,.T.);+#13538 = ORIENTED_EDGE('',*,*,#13510,.F.);+#13539 = ADVANCED_FACE('',(#13540),#3547,.T.);+#13540 = FACE_BOUND('',#13541,.T.);+#13541 = EDGE_LOOP('',(#13542,#13543,#13564,#13565));+#13542 = ORIENTED_EDGE('',*,*,#3527,.T.);+#13543 = ORIENTED_EDGE('',*,*,#13544,.T.);+#13544 = EDGE_CURVE('',#3492,#12893,#13545,.T.);+#13545 = SURFACE_CURVE('',#13546,(#13550,#13557),.PCURVE_S1.);+#13546 = LINE('',#13547,#13548);+#13547 = CARTESIAN_POINT('',(-2.290349147621E-02,-4.180481575675E-02,+ 1.2500001));+#13548 = VECTOR('',#13549,1.);+#13549 = DIRECTION('',(-0.,-0.,-1.));+#13550 = PCURVE('',#3547,#13551);+#13551 = DEFINITIONAL_REPRESENTATION('',(#13552),#13556);+#13552 = LINE('',#13553,#13554);+#13553 = CARTESIAN_POINT('',(0.,0.));+#13554 = VECTOR('',#13555,1.);+#13555 = DIRECTION('',(0.,-1.));+#13556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13557 = PCURVE('',#3511,#13558);+#13558 = DEFINITIONAL_REPRESENTATION('',(#13559),#13563);+#13559 = LINE('',#13560,#13561);+#13560 = CARTESIAN_POINT('',(1.,0.));+#13561 = VECTOR('',#13562,1.);+#13562 = DIRECTION('',(0.,-1.));+#13563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13564 = ORIENTED_EDGE('',*,*,#12915,.T.);+#13565 = ORIENTED_EDGE('',*,*,#12746,.F.);+#13566 = ADVANCED_FACE('',(#13567),#3511,.T.);+#13567 = FACE_BOUND('',#13568,.T.);+#13568 = EDGE_LOOP('',(#13569,#13570,#13591,#13592));+#13569 = ORIENTED_EDGE('',*,*,#3491,.T.);+#13570 = ORIENTED_EDGE('',*,*,#13571,.T.);+#13571 = EDGE_CURVE('',#3456,#12870,#13572,.T.);+#13572 = SURFACE_CURVE('',#13573,(#13577,#13584),.PCURVE_S1.);+#13573 = LINE('',#13574,#13575);+#13574 = CARTESIAN_POINT('',(-1.006485611584E-02,2.853030080082E-03,+ 1.2500001));+#13575 = VECTOR('',#13576,1.);+#13576 = DIRECTION('',(-0.,-0.,-1.));+#13577 = PCURVE('',#3511,#13578);+#13578 = DEFINITIONAL_REPRESENTATION('',(#13579),#13583);+#13579 = LINE('',#13580,#13581);+#13580 = CARTESIAN_POINT('',(0.,0.));+#13581 = VECTOR('',#13582,1.);+#13582 = DIRECTION('',(0.,-1.));+#13583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13584 = PCURVE('',#3475,#13585);+#13585 = DEFINITIONAL_REPRESENTATION('',(#13586),#13590);+#13586 = LINE('',#13587,#13588);+#13587 = CARTESIAN_POINT('',(1.,0.));+#13588 = VECTOR('',#13589,1.);+#13589 = DIRECTION('',(0.,-1.));+#13590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13591 = ORIENTED_EDGE('',*,*,#12892,.T.);+#13592 = ORIENTED_EDGE('',*,*,#13544,.F.);+#13593 = ADVANCED_FACE('',(#13594),#3475,.T.);+#13594 = FACE_BOUND('',#13595,.T.);+#13595 = EDGE_LOOP('',(#13596,#13597,#13618,#13619));+#13596 = ORIENTED_EDGE('',*,*,#3455,.T.);+#13597 = ORIENTED_EDGE('',*,*,#13598,.T.);+#13598 = EDGE_CURVE('',#3420,#12847,#13599,.T.);+#13599 = SURFACE_CURVE('',#13600,(#13604,#13611),.PCURVE_S1.);+#13600 = LINE('',#13601,#13602);+#13601 = CARTESIAN_POINT('',(-2.290349147621E-02,4.770900300581E-02,+ 1.2500001));+#13602 = VECTOR('',#13603,1.);+#13603 = DIRECTION('',(-0.,-0.,-1.));+#13604 = PCURVE('',#3475,#13605);+#13605 = DEFINITIONAL_REPRESENTATION('',(#13606),#13610);+#13606 = LINE('',#13607,#13608);+#13607 = CARTESIAN_POINT('',(0.,0.));+#13608 = VECTOR('',#13609,1.);+#13609 = DIRECTION('',(0.,-1.));+#13610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13611 = PCURVE('',#3439,#13612);+#13612 = DEFINITIONAL_REPRESENTATION('',(#13613),#13617);+#13613 = LINE('',#13614,#13615);+#13614 = CARTESIAN_POINT('',(1.,0.));+#13615 = VECTOR('',#13616,1.);+#13616 = DIRECTION('',(0.,-1.));+#13617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13618 = ORIENTED_EDGE('',*,*,#12869,.T.);+#13619 = ORIENTED_EDGE('',*,*,#13571,.F.);+#13620 = ADVANCED_FACE('',(#13621),#3439,.T.);+#13621 = FACE_BOUND('',#13622,.T.);+#13622 = EDGE_LOOP('',(#13623,#13624,#13645,#13646));+#13623 = ORIENTED_EDGE('',*,*,#3419,.T.);+#13624 = ORIENTED_EDGE('',*,*,#13625,.T.);+#13625 = EDGE_CURVE('',#3393,#12824,#13626,.T.);+#13626 = SURFACE_CURVE('',#13627,(#13631,#13638),.PCURVE_S1.);+#13627 = LINE('',#13628,#13629);+#13628 = CARTESIAN_POINT('',(-6.284591259735E-02,6.213265507733E-02,+ 1.2500001));+#13629 = VECTOR('',#13630,1.);+#13630 = DIRECTION('',(-0.,-0.,-1.));+#13631 = PCURVE('',#3439,#13632);+#13632 = DEFINITIONAL_REPRESENTATION('',(#13633),#13637);+#13633 = LINE('',#13634,#13635);+#13634 = CARTESIAN_POINT('',(0.,0.));+#13635 = VECTOR('',#13636,1.);+#13636 = DIRECTION('',(0.,-1.));+#13637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13638 = PCURVE('',#3408,#13639);+#13639 = DEFINITIONAL_REPRESENTATION('',(#13640),#13644);+#13640 = LINE('',#13641,#13642);+#13641 = CARTESIAN_POINT('',(2.401300317402E-02,0.));+#13642 = VECTOR('',#13643,1.);+#13643 = DIRECTION('',(0.,-1.));+#13644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13645 = ORIENTED_EDGE('',*,*,#12846,.T.);+#13646 = ORIENTED_EDGE('',*,*,#13598,.F.);+#13647 = ADVANCED_FACE('',(#13648),#3408,.T.);+#13648 = FACE_BOUND('',#13649,.T.);+#13649 = EDGE_LOOP('',(#13650,#13651,#13672,#13673));+#13650 = ORIENTED_EDGE('',*,*,#3392,.F.);+#13651 = ORIENTED_EDGE('',*,*,#13652,.T.);+#13652 = EDGE_CURVE('',#3366,#12822,#13653,.T.);+#13653 = SURFACE_CURVE('',#13654,(#13658,#13665),.PCURVE_S1.);+#13654 = LINE('',#13655,#13656);+#13655 = CARTESIAN_POINT('',(-8.685891577137E-02,6.213265507733E-02,+ 1.2500001));+#13656 = VECTOR('',#13657,1.);+#13657 = DIRECTION('',(-0.,-0.,-1.));+#13658 = PCURVE('',#3408,#13659);+#13659 = DEFINITIONAL_REPRESENTATION('',(#13660),#13664);+#13660 = LINE('',#13661,#13662);+#13661 = CARTESIAN_POINT('',(0.,0.));+#13662 = VECTOR('',#13663,1.);+#13663 = DIRECTION('',(0.,-1.));+#13664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13665 = PCURVE('',#3381,#13666);+#13666 = DEFINITIONAL_REPRESENTATION('',(#13667),#13671);+#13667 = LINE('',#13668,#13669);+#13668 = CARTESIAN_POINT('',(0.118321497488,0.));+#13669 = VECTOR('',#13670,1.);+#13670 = DIRECTION('',(0.,-1.));+#13671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13672 = ORIENTED_EDGE('',*,*,#12821,.T.);+#13673 = ORIENTED_EDGE('',*,*,#13625,.F.);+#13674 = ADVANCED_FACE('',(#13675),#3381,.T.);+#13675 = FACE_BOUND('',#13676,.T.);+#13676 = EDGE_LOOP('',(#13677,#13678,#13679,#13680));+#13677 = ORIENTED_EDGE('',*,*,#3363,.F.);+#13678 = ORIENTED_EDGE('',*,*,#12797,.T.);+#13679 = ORIENTED_EDGE('',*,*,#12937,.T.);+#13680 = ORIENTED_EDGE('',*,*,#13652,.F.);+#13681 = ADVANCED_FACE('',(#13682),#3350,.T.);+#13682 = FACE_BOUND('',#13683,.T.);+#13683 = EDGE_LOOP('',(#13684,#13685,#13708,#13736));+#13684 = ORIENTED_EDGE('',*,*,#3336,.F.);+#13685 = ORIENTED_EDGE('',*,*,#13686,.T.);+#13686 = EDGE_CURVE('',#3310,#13687,#13689,.T.);+#13687 = VERTEX_POINT('',#13688);+#13688 = CARTESIAN_POINT('',(-0.15628264772,-5.618884241049E-02,+ 1.1500001));+#13689 = SURFACE_CURVE('',#13690,(#13694,#13701),.PCURVE_S1.);+#13690 = LINE('',#13691,#13692);+#13691 = CARTESIAN_POINT('',(-0.15628264772,-5.618884241049E-02,+ 1.2500001));+#13692 = VECTOR('',#13693,1.);+#13693 = DIRECTION('',(-0.,-0.,-1.));+#13694 = PCURVE('',#3350,#13695);+#13695 = DEFINITIONAL_REPRESENTATION('',(#13696),#13700);+#13696 = LINE('',#13697,#13698);+#13697 = CARTESIAN_POINT('',(0.,0.));+#13698 = VECTOR('',#13699,1.);+#13699 = DIRECTION('',(0.,-1.));+#13700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13701 = PCURVE('',#3325,#13702);+#13702 = DEFINITIONAL_REPRESENTATION('',(#13703),#13707);+#13703 = LINE('',#13704,#13705);+#13704 = CARTESIAN_POINT('',(1.941645471167E-02,0.));+#13705 = VECTOR('',#13706,1.);+#13706 = DIRECTION('',(0.,-1.));+#13707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13708 = ORIENTED_EDGE('',*,*,#13709,.T.);+#13709 = EDGE_CURVE('',#13687,#13710,#13712,.T.);+#13710 = VERTEX_POINT('',#13711);+#13711 = CARTESIAN_POINT('',(-0.190915262859,6.213265507733E-02,+ 1.1500001));+#13712 = SURFACE_CURVE('',#13713,(#13717,#13724),.PCURVE_S1.);+#13713 = LINE('',#13714,#13715);+#13714 = CARTESIAN_POINT('',(-0.15628264772,-5.618884241049E-02,+ 1.1500001));+#13715 = VECTOR('',#13716,1.);+#13716 = DIRECTION('',(-0.280913194718,0.959733180125,0.));+#13717 = PCURVE('',#3350,#13718);+#13718 = DEFINITIONAL_REPRESENTATION('',(#13719),#13723);+#13719 = LINE('',#13720,#13721);+#13720 = CARTESIAN_POINT('',(0.,-0.1));+#13721 = VECTOR('',#13722,1.);+#13722 = DIRECTION('',(1.,0.));+#13723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13724 = PCURVE('',#13725,#13730);+#13725 = PLANE('',#13726);+#13726 = AXIS2_PLACEMENT_3D('',#13727,#13728,#13729);+#13727 = CARTESIAN_POINT('',(-0.195432560486,-5.618884241049E-02,+ 1.1500001));+#13728 = DIRECTION('',(0.,0.,1.));+#13729 = DIRECTION('',(1.,0.,0.));+#13730 = DEFINITIONAL_REPRESENTATION('',(#13731),#13735);+#13731 = LINE('',#13732,#13733);+#13732 = CARTESIAN_POINT('',(3.914991276556E-02,0.));+#13733 = VECTOR('',#13734,1.);+#13734 = DIRECTION('',(-0.280913194718,0.959733180125));+#13735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13736 = ORIENTED_EDGE('',*,*,#13737,.F.);+#13737 = EDGE_CURVE('',#3173,#13710,#13738,.T.);+#13738 = SURFACE_CURVE('',#13739,(#13743,#13750),.PCURVE_S1.);+#13739 = LINE('',#13740,#13741);+#13740 = CARTESIAN_POINT('',(-0.190915262859,6.213265507733E-02,+ 1.2500001));+#13741 = VECTOR('',#13742,1.);+#13742 = DIRECTION('',(-0.,-0.,-1.));+#13743 = PCURVE('',#3350,#13744);+#13744 = DEFINITIONAL_REPRESENTATION('',(#13745),#13749);+#13745 = LINE('',#13746,#13747);+#13746 = CARTESIAN_POINT('',(0.123285825621,0.));+#13747 = VECTOR('',#13748,1.);+#13748 = DIRECTION('',(0.,-1.));+#13749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13750 = PCURVE('',#3190,#13751);+#13751 = DEFINITIONAL_REPRESENTATION('',(#13752),#13756);+#13752 = LINE('',#13753,#13754);+#13753 = CARTESIAN_POINT('',(0.,0.));+#13754 = VECTOR('',#13755,1.);+#13755 = DIRECTION('',(0.,-1.));+#13756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13757 = ADVANCED_FACE('',(#13758),#13725,.T.);+#13758 = FACE_BOUND('',#13759,.F.);+#13759 = EDGE_LOOP('',(#13760,#13785,#13808,#13831,#13854,#13875,#13876)+ );+#13760 = ORIENTED_EDGE('',*,*,#13761,.T.);+#13761 = EDGE_CURVE('',#13762,#13764,#13766,.T.);+#13762 = VERTEX_POINT('',#13763);+#13763 = CARTESIAN_POINT('',(-0.174351838227,6.213265507733E-02,+ 1.1500001));+#13764 = VERTEX_POINT('',#13765);+#13765 = CARTESIAN_POINT('',(-0.146614045782,-4.271620036567E-02,+ 1.1500001));+#13766 = SURFACE_CURVE('',#13767,(#13771,#13778),.PCURVE_S1.);+#13767 = LINE('',#13768,#13769);+#13768 = CARTESIAN_POINT('',(-0.174351838227,6.213265507733E-02,+ 1.1500001));+#13769 = VECTOR('',#13770,1.);+#13770 = DIRECTION('',(0.255751966392,-0.966742432961,0.));+#13771 = PCURVE('',#13725,#13772);+#13772 = DEFINITIONAL_REPRESENTATION('',(#13773),#13777);+#13773 = LINE('',#13774,#13775);+#13774 = CARTESIAN_POINT('',(2.108072225838E-02,0.118321497488));+#13775 = VECTOR('',#13776,1.);+#13776 = DIRECTION('',(0.255751966392,-0.966742432961));+#13777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13778 = PCURVE('',#3217,#13779);+#13779 = DEFINITIONAL_REPRESENTATION('',(#13780),#13784);+#13780 = LINE('',#13781,#13782);+#13781 = CARTESIAN_POINT('',(0.,-0.1));+#13782 = VECTOR('',#13783,1.);+#13783 = DIRECTION('',(1.,0.));+#13784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13785 = ORIENTED_EDGE('',*,*,#13786,.T.);+#13786 = EDGE_CURVE('',#13764,#13787,#13789,.T.);+#13787 = VERTEX_POINT('',#13788);+#13788 = CARTESIAN_POINT('',(-0.118797002501,6.213265507733E-02,+ 1.1500001));+#13789 = SURFACE_CURVE('',#13790,(#13794,#13801),.PCURVE_S1.);+#13790 = LINE('',#13791,#13792);+#13791 = CARTESIAN_POINT('',(-0.146614045782,-4.271620036567E-02,+ 1.1500001));+#13792 = VECTOR('',#13793,1.);+#13793 = DIRECTION('',(0.256434699025,0.966561557862,0.));+#13794 = PCURVE('',#13725,#13795);+#13795 = DEFINITIONAL_REPRESENTATION('',(#13796),#13800);+#13796 = LINE('',#13797,#13798);+#13797 = CARTESIAN_POINT('',(4.881851470362E-02,1.347264204483E-02));+#13798 = VECTOR('',#13799,1.);+#13799 = DIRECTION('',(0.256434699025,0.966561557862));+#13800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13801 = PCURVE('',#3244,#13802);+#13802 = DEFINITIONAL_REPRESENTATION('',(#13803),#13807);+#13803 = LINE('',#13804,#13805);+#13804 = CARTESIAN_POINT('',(0.,-0.1));+#13805 = VECTOR('',#13806,1.);+#13806 = DIRECTION('',(1.,0.));+#13807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13808 = ORIENTED_EDGE('',*,*,#13809,.T.);+#13809 = EDGE_CURVE('',#13787,#13810,#13812,.T.);+#13810 = VERTEX_POINT('',#13811);+#13811 = CARTESIAN_POINT('',(-0.10223357787,6.213265507733E-02,1.1500001+ ));+#13812 = SURFACE_CURVE('',#13813,(#13817,#13824),.PCURVE_S1.);+#13813 = LINE('',#13814,#13815);+#13814 = CARTESIAN_POINT('',(-0.118797002501,6.213265507733E-02,+ 1.1500001));+#13815 = VECTOR('',#13816,1.);+#13816 = DIRECTION('',(1.,0.,0.));+#13817 = PCURVE('',#13725,#13818);+#13818 = DEFINITIONAL_REPRESENTATION('',(#13819),#13823);+#13819 = LINE('',#13820,#13821);+#13820 = CARTESIAN_POINT('',(7.663555798441E-02,0.118321497488));+#13821 = VECTOR('',#13822,1.);+#13822 = DIRECTION('',(1.,0.));+#13823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13824 = PCURVE('',#3271,#13825);+#13825 = DEFINITIONAL_REPRESENTATION('',(#13826),#13830);+#13826 = LINE('',#13827,#13828);+#13827 = CARTESIAN_POINT('',(0.,-0.1));+#13828 = VECTOR('',#13829,1.);+#13829 = DIRECTION('',(1.,0.));+#13830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13831 = ORIENTED_EDGE('',*,*,#13832,.T.);+#13832 = EDGE_CURVE('',#13810,#13833,#13835,.T.);+#13833 = VERTEX_POINT('',#13834);+#13834 = CARTESIAN_POINT('',(-0.136866193008,-5.618884241049E-02,+ 1.1500001));+#13835 = SURFACE_CURVE('',#13836,(#13840,#13847),.PCURVE_S1.);+#13836 = LINE('',#13837,#13838);+#13837 = CARTESIAN_POINT('',(-0.10223357787,6.213265507733E-02,1.1500001+ ));+#13838 = VECTOR('',#13839,1.);+#13839 = DIRECTION('',(-0.280913194718,-0.959733180125,0.));+#13840 = PCURVE('',#13725,#13841);+#13841 = DEFINITIONAL_REPRESENTATION('',(#13842),#13846);+#13842 = LINE('',#13843,#13844);+#13843 = CARTESIAN_POINT('',(9.3198982616E-02,0.118321497488));+#13844 = VECTOR('',#13845,1.);+#13845 = DIRECTION('',(-0.280913194718,-0.959733180125));+#13846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13847 = PCURVE('',#3298,#13848);+#13848 = DEFINITIONAL_REPRESENTATION('',(#13849),#13853);+#13849 = LINE('',#13850,#13851);+#13850 = CARTESIAN_POINT('',(-0.,-0.1));+#13851 = VECTOR('',#13852,1.);+#13852 = DIRECTION('',(1.,0.));+#13853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13854 = ORIENTED_EDGE('',*,*,#13855,.T.);+#13855 = EDGE_CURVE('',#13833,#13687,#13856,.T.);+#13856 = SURFACE_CURVE('',#13857,(#13861,#13868),.PCURVE_S1.);+#13857 = LINE('',#13858,#13859);+#13858 = CARTESIAN_POINT('',(-0.136866193008,-5.618884241049E-02,+ 1.1500001));+#13859 = VECTOR('',#13860,1.);+#13860 = DIRECTION('',(-1.,0.,0.));+#13861 = PCURVE('',#13725,#13862);+#13862 = DEFINITIONAL_REPRESENTATION('',(#13863),#13867);+#13863 = LINE('',#13864,#13865);+#13864 = CARTESIAN_POINT('',(5.856636747723E-02,0.));+#13865 = VECTOR('',#13866,1.);+#13866 = DIRECTION('',(-1.,0.));+#13867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13868 = PCURVE('',#3325,#13869);+#13869 = DEFINITIONAL_REPRESENTATION('',(#13870),#13874);+#13870 = LINE('',#13871,#13872);+#13871 = CARTESIAN_POINT('',(0.,-0.1));+#13872 = VECTOR('',#13873,1.);+#13873 = DIRECTION('',(1.,0.));+#13874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13875 = ORIENTED_EDGE('',*,*,#13709,.T.);+#13876 = ORIENTED_EDGE('',*,*,#13877,.T.);+#13877 = EDGE_CURVE('',#13710,#13762,#13878,.T.);+#13878 = SURFACE_CURVE('',#13879,(#13883,#13890),.PCURVE_S1.);+#13879 = LINE('',#13880,#13881);+#13880 = CARTESIAN_POINT('',(-0.190915262859,6.213265507733E-02,+ 1.1500001));+#13881 = VECTOR('',#13882,1.);+#13882 = DIRECTION('',(1.,0.,0.));+#13883 = PCURVE('',#13725,#13884);+#13884 = DEFINITIONAL_REPRESENTATION('',(#13885),#13889);+#13885 = LINE('',#13886,#13887);+#13886 = CARTESIAN_POINT('',(4.517297626796E-03,0.118321497488));+#13887 = VECTOR('',#13888,1.);+#13888 = DIRECTION('',(1.,0.));+#13889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13890 = PCURVE('',#3190,#13891);+#13891 = DEFINITIONAL_REPRESENTATION('',(#13892),#13896);+#13892 = LINE('',#13893,#13894);+#13893 = CARTESIAN_POINT('',(0.,-0.1));+#13894 = VECTOR('',#13895,1.);+#13895 = DIRECTION('',(1.,0.));+#13896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13897 = ADVANCED_FACE('',(#13898),#3325,.T.);+#13898 = FACE_BOUND('',#13899,.T.);+#13899 = EDGE_LOOP('',(#13900,#13901,#13922,#13923));+#13900 = ORIENTED_EDGE('',*,*,#3309,.F.);+#13901 = ORIENTED_EDGE('',*,*,#13902,.T.);+#13902 = EDGE_CURVE('',#3283,#13833,#13903,.T.);+#13903 = SURFACE_CURVE('',#13904,(#13908,#13915),.PCURVE_S1.);+#13904 = LINE('',#13905,#13906);+#13905 = CARTESIAN_POINT('',(-0.136866193008,-5.618884241049E-02,+ 1.2500001));+#13906 = VECTOR('',#13907,1.);+#13907 = DIRECTION('',(-0.,-0.,-1.));+#13908 = PCURVE('',#3325,#13909);+#13909 = DEFINITIONAL_REPRESENTATION('',(#13910),#13914);+#13910 = LINE('',#13911,#13912);+#13911 = CARTESIAN_POINT('',(0.,0.));+#13912 = VECTOR('',#13913,1.);+#13913 = DIRECTION('',(0.,-1.));+#13914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13915 = PCURVE('',#3298,#13916);+#13916 = DEFINITIONAL_REPRESENTATION('',(#13917),#13921);+#13917 = LINE('',#13918,#13919);+#13918 = CARTESIAN_POINT('',(0.123285825621,0.));+#13919 = VECTOR('',#13920,1.);+#13920 = DIRECTION('',(0.,-1.));+#13921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13922 = ORIENTED_EDGE('',*,*,#13855,.T.);+#13923 = ORIENTED_EDGE('',*,*,#13686,.F.);+#13924 = ADVANCED_FACE('',(#13925),#3298,.T.);+#13925 = FACE_BOUND('',#13926,.T.);+#13926 = EDGE_LOOP('',(#13927,#13928,#13949,#13950));+#13927 = ORIENTED_EDGE('',*,*,#3282,.F.);+#13928 = ORIENTED_EDGE('',*,*,#13929,.T.);+#13929 = EDGE_CURVE('',#3256,#13810,#13930,.T.);+#13930 = SURFACE_CURVE('',#13931,(#13935,#13942),.PCURVE_S1.);+#13931 = LINE('',#13932,#13933);+#13932 = CARTESIAN_POINT('',(-0.10223357787,6.213265507733E-02,1.2500001+ ));+#13933 = VECTOR('',#13934,1.);+#13934 = DIRECTION('',(-0.,-0.,-1.));+#13935 = PCURVE('',#3298,#13936);+#13936 = DEFINITIONAL_REPRESENTATION('',(#13937),#13941);+#13937 = LINE('',#13938,#13939);+#13938 = CARTESIAN_POINT('',(0.,0.));+#13939 = VECTOR('',#13940,1.);+#13940 = DIRECTION('',(0.,-1.));+#13941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13942 = PCURVE('',#3271,#13943);+#13943 = DEFINITIONAL_REPRESENTATION('',(#13944),#13948);+#13944 = LINE('',#13945,#13946);+#13945 = CARTESIAN_POINT('',(1.656342463158E-02,0.));+#13946 = VECTOR('',#13947,1.);+#13947 = DIRECTION('',(0.,-1.));+#13948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13949 = ORIENTED_EDGE('',*,*,#13832,.T.);+#13950 = ORIENTED_EDGE('',*,*,#13902,.F.);+#13951 = ADVANCED_FACE('',(#13952),#3271,.T.);+#13952 = FACE_BOUND('',#13953,.T.);+#13953 = EDGE_LOOP('',(#13954,#13955,#13976,#13977));+#13954 = ORIENTED_EDGE('',*,*,#3255,.F.);+#13955 = ORIENTED_EDGE('',*,*,#13956,.T.);+#13956 = EDGE_CURVE('',#3229,#13787,#13957,.T.);+#13957 = SURFACE_CURVE('',#13958,(#13962,#13969),.PCURVE_S1.);+#13958 = LINE('',#13959,#13960);+#13959 = CARTESIAN_POINT('',(-0.118797002501,6.213265507733E-02,+ 1.2500001));+#13960 = VECTOR('',#13961,1.);+#13961 = DIRECTION('',(-0.,-0.,-1.));+#13962 = PCURVE('',#3271,#13963);+#13963 = DEFINITIONAL_REPRESENTATION('',(#13964),#13968);+#13964 = LINE('',#13965,#13966);+#13965 = CARTESIAN_POINT('',(0.,0.));+#13966 = VECTOR('',#13967,1.);+#13967 = DIRECTION('',(0.,-1.));+#13968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13969 = PCURVE('',#3244,#13970);+#13970 = DEFINITIONAL_REPRESENTATION('',(#13971),#13975);+#13971 = LINE('',#13972,#13973);+#13972 = CARTESIAN_POINT('',(0.108476128178,0.));+#13973 = VECTOR('',#13974,1.);+#13974 = DIRECTION('',(0.,-1.));+#13975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13976 = ORIENTED_EDGE('',*,*,#13809,.T.);+#13977 = ORIENTED_EDGE('',*,*,#13929,.F.);+#13978 = ADVANCED_FACE('',(#13979),#3244,.T.);+#13979 = FACE_BOUND('',#13980,.T.);+#13980 = EDGE_LOOP('',(#13981,#13982,#14003,#14004));+#13981 = ORIENTED_EDGE('',*,*,#3228,.F.);+#13982 = ORIENTED_EDGE('',*,*,#13983,.T.);+#13983 = EDGE_CURVE('',#3202,#13764,#13984,.T.);+#13984 = SURFACE_CURVE('',#13985,(#13989,#13996),.PCURVE_S1.);+#13985 = LINE('',#13986,#13987);+#13986 = CARTESIAN_POINT('',(-0.146614045782,-4.271620036567E-02,+ 1.2500001));+#13987 = VECTOR('',#13988,1.);+#13988 = DIRECTION('',(-0.,-0.,-1.));+#13989 = PCURVE('',#3244,#13990);+#13990 = DEFINITIONAL_REPRESENTATION('',(#13991),#13995);+#13991 = LINE('',#13992,#13993);+#13992 = CARTESIAN_POINT('',(-6.706868101598E-18,0.));+#13993 = VECTOR('',#13994,1.);+#13994 = DIRECTION('',(0.,-1.));+#13995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13996 = PCURVE('',#3217,#13997);+#13997 = DEFINITIONAL_REPRESENTATION('',(#13998),#14002);+#13998 = LINE('',#13999,#14000);+#13999 = CARTESIAN_POINT('',(0.108455832565,0.));+#14000 = VECTOR('',#14001,1.);+#14001 = DIRECTION('',(0.,-1.));+#14002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14003 = ORIENTED_EDGE('',*,*,#13786,.T.);+#14004 = ORIENTED_EDGE('',*,*,#13956,.F.);+#14005 = ADVANCED_FACE('',(#14006),#3217,.T.);+#14006 = FACE_BOUND('',#14007,.T.);+#14007 = EDGE_LOOP('',(#14008,#14009,#14030,#14031));+#14008 = ORIENTED_EDGE('',*,*,#3201,.F.);+#14009 = ORIENTED_EDGE('',*,*,#14010,.T.);+#14010 = EDGE_CURVE('',#3175,#13762,#14011,.T.);+#14011 = SURFACE_CURVE('',#14012,(#14016,#14023),.PCURVE_S1.);+#14012 = LINE('',#14013,#14014);+#14013 = CARTESIAN_POINT('',(-0.174351838227,6.213265507733E-02,+ 1.2500001));+#14014 = VECTOR('',#14015,1.);+#14015 = DIRECTION('',(-0.,-0.,-1.));+#14016 = PCURVE('',#3217,#14017);+#14017 = DEFINITIONAL_REPRESENTATION('',(#14018),#14022);+#14018 = LINE('',#14019,#14020);+#14019 = CARTESIAN_POINT('',(0.,0.));+#14020 = VECTOR('',#14021,1.);+#14021 = DIRECTION('',(0.,-1.));+#14022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14023 = PCURVE('',#3190,#14024);+#14024 = DEFINITIONAL_REPRESENTATION('',(#14025),#14029);+#14025 = LINE('',#14026,#14027);+#14026 = CARTESIAN_POINT('',(1.656342463158E-02,0.));+#14027 = VECTOR('',#14028,1.);+#14028 = DIRECTION('',(0.,-1.));+#14029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14030 = ORIENTED_EDGE('',*,*,#13761,.T.);+#14031 = ORIENTED_EDGE('',*,*,#13983,.F.);+#14032 = ADVANCED_FACE('',(#14033),#3190,.T.);+#14033 = FACE_BOUND('',#14034,.T.);+#14034 = EDGE_LOOP('',(#14035,#14036,#14037,#14038));+#14035 = ORIENTED_EDGE('',*,*,#3172,.F.);+#14036 = ORIENTED_EDGE('',*,*,#13737,.T.);+#14037 = ORIENTED_EDGE('',*,*,#13877,.T.);+#14038 = ORIENTED_EDGE('',*,*,#14010,.F.);+#14039 = ADVANCED_FACE('',(#14040),#3159,.T.);+#14040 = FACE_BOUND('',#14041,.T.);+#14041 = EDGE_LOOP('',(#14042,#14043,#14066,#14094));+#14042 = ORIENTED_EDGE('',*,*,#3145,.F.);+#14043 = ORIENTED_EDGE('',*,*,#14044,.T.);+#14044 = EDGE_CURVE('',#3119,#14045,#14047,.T.);+#14045 = VERTEX_POINT('',#14046);+#14046 = CARTESIAN_POINT('',(-0.266203556639,1.585016711156E-04,+ 1.1500001));+#14047 = SURFACE_CURVE('',#14048,(#14052,#14059),.PCURVE_S1.);+#14048 = LINE('',#14049,#14050);+#14049 = CARTESIAN_POINT('',(-0.266203556639,1.585016711156E-04,+ 1.2500001));+#14050 = VECTOR('',#14051,1.);+#14051 = DIRECTION('',(-0.,-0.,-1.));+#14052 = PCURVE('',#3159,#14053);+#14053 = DEFINITIONAL_REPRESENTATION('',(#14054),#14058);+#14054 = LINE('',#14055,#14056);+#14055 = CARTESIAN_POINT('',(0.,0.));+#14056 = VECTOR('',#14057,1.);+#14057 = DIRECTION('',(0.,-1.));+#14058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14059 = PCURVE('',#3134,#14060);+#14060 = DEFINITIONAL_REPRESENTATION('',(#14061),#14065);+#14061 = LINE('',#14062,#14063);+#14062 = CARTESIAN_POINT('',(4.382571206347E-02,0.));+#14063 = VECTOR('',#14064,1.);+#14064 = DIRECTION('',(0.,-1.));+#14065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14066 = ORIENTED_EDGE('',*,*,#14067,.T.);+#14067 = EDGE_CURVE('',#14045,#14068,#14070,.T.);+#14068 = VERTEX_POINT('',#14069);+#14069 = CARTESIAN_POINT('',(-0.266203556639,-5.618884241049E-02,+ 1.1500001));+#14070 = SURFACE_CURVE('',#14071,(#14075,#14082),.PCURVE_S1.);+#14071 = LINE('',#14072,#14073);+#14072 = CARTESIAN_POINT('',(-0.266203556639,1.585016711156E-04,+ 1.1500001));+#14073 = VECTOR('',#14074,1.);+#14074 = DIRECTION('',(0.,-1.,0.));+#14075 = PCURVE('',#3159,#14076);+#14076 = DEFINITIONAL_REPRESENTATION('',(#14077),#14081);+#14077 = LINE('',#14078,#14079);+#14078 = CARTESIAN_POINT('',(0.,-0.1));+#14079 = VECTOR('',#14080,1.);+#14080 = DIRECTION('',(1.,0.));+#14081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14082 = PCURVE('',#14083,#14088);+#14083 = PLANE('',#14084);+#14084 = AXIS2_PLACEMENT_3D('',#14085,#14086,#14087);+#14085 = CARTESIAN_POINT('',(-0.293148840728,-5.618884241049E-02,+ 1.1500001));+#14086 = DIRECTION('',(0.,0.,1.));+#14087 = DIRECTION('',(1.,0.,0.));+#14088 = DEFINITIONAL_REPRESENTATION('',(#14089),#14093);+#14089 = LINE('',#14090,#14091);+#14090 = CARTESIAN_POINT('',(2.694528408966E-02,5.634734408161E-02));+#14091 = VECTOR('',#14092,1.);+#14092 = DIRECTION('',(0.,-1.));+#14093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14094 = ORIENTED_EDGE('',*,*,#14095,.F.);+#14095 = EDGE_CURVE('',#2847,#14068,#14096,.T.);+#14096 = SURFACE_CURVE('',#14097,(#14101,#14108),.PCURVE_S1.);+#14097 = LINE('',#14098,#14099);+#14098 = CARTESIAN_POINT('',(-0.266203556639,-5.618884241049E-02,+ 1.2500001));+#14099 = VECTOR('',#14100,1.);+#14100 = DIRECTION('',(-0.,-0.,-1.));+#14101 = PCURVE('',#3159,#14102);+#14102 = DEFINITIONAL_REPRESENTATION('',(#14103),#14107);+#14103 = LINE('',#14104,#14105);+#14104 = CARTESIAN_POINT('',(5.634734408161E-02,0.));+#14105 = VECTOR('',#14106,1.);+#14106 = DIRECTION('',(0.,-1.));+#14107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14108 = PCURVE('',#2864,#14109);+#14109 = DEFINITIONAL_REPRESENTATION('',(#14110),#14114);+#14110 = LINE('',#14111,#14112);+#14111 = CARTESIAN_POINT('',(0.,0.));+#14112 = VECTOR('',#14113,1.);+#14113 = DIRECTION('',(0.,-1.));+#14114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14115 = ADVANCED_FACE('',(#14116),#14083,.T.);+#14116 = FACE_BOUND('',#14117,.F.);+#14117 = EDGE_LOOP('',(#14118,#14143,#14166,#14189,#14212,#14235,#14258,+ #14281,#14304,#14327,#14348,#14349));+#14118 = ORIENTED_EDGE('',*,*,#14119,.T.);+#14119 = EDGE_CURVE('',#14120,#14122,#14124,.T.);+#14120 = VERTEX_POINT('',#14121);+#14121 = CARTESIAN_POINT('',(-0.282291476257,-5.618884241049E-02,+ 1.1500001));+#14122 = VERTEX_POINT('',#14123);+#14123 = CARTESIAN_POINT('',(-0.282291476257,6.213265507733E-02,+ 1.1500001));+#14124 = SURFACE_CURVE('',#14125,(#14129,#14136),.PCURVE_S1.);+#14125 = LINE('',#14126,#14127);+#14126 = CARTESIAN_POINT('',(-0.282291476257,-5.618884241049E-02,+ 1.1500001));+#14127 = VECTOR('',#14128,1.);+#14128 = DIRECTION('',(0.,1.,0.));+#14129 = PCURVE('',#14083,#14130);+#14130 = DEFINITIONAL_REPRESENTATION('',(#14131),#14135);+#14131 = LINE('',#14132,#14133);+#14132 = CARTESIAN_POINT('',(1.085736447142E-02,0.));+#14133 = VECTOR('',#14134,1.);+#14134 = DIRECTION('',(0.,1.));+#14135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14136 = PCURVE('',#2891,#14137);+#14137 = DEFINITIONAL_REPRESENTATION('',(#14138),#14142);+#14138 = LINE('',#14139,#14140);+#14139 = CARTESIAN_POINT('',(0.,-0.1));+#14140 = VECTOR('',#14141,1.);+#14141 = DIRECTION('',(1.,0.));+#14142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14143 = ORIENTED_EDGE('',*,*,#14144,.T.);+#14144 = EDGE_CURVE('',#14122,#14145,#14147,.T.);+#14145 = VERTEX_POINT('',#14146);+#14146 = CARTESIAN_POINT('',(-0.266203556639,6.213265507733E-02,+ 1.1500001));+#14147 = SURFACE_CURVE('',#14148,(#14152,#14159),.PCURVE_S1.);+#14148 = LINE('',#14149,#14150);+#14149 = CARTESIAN_POINT('',(-0.282291476257,6.213265507733E-02,+ 1.1500001));+#14150 = VECTOR('',#14151,1.);+#14151 = DIRECTION('',(1.,0.,0.));+#14152 = PCURVE('',#14083,#14153);+#14153 = DEFINITIONAL_REPRESENTATION('',(#14154),#14158);+#14154 = LINE('',#14155,#14156);+#14155 = CARTESIAN_POINT('',(1.085736447142E-02,0.118321497488));+#14156 = VECTOR('',#14157,1.);+#14157 = DIRECTION('',(1.,0.));+#14158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14159 = PCURVE('',#2918,#14160);+#14160 = DEFINITIONAL_REPRESENTATION('',(#14161),#14165);+#14161 = LINE('',#14162,#14163);+#14162 = CARTESIAN_POINT('',(0.,-0.1));+#14163 = VECTOR('',#14164,1.);+#14164 = DIRECTION('',(1.,0.));+#14165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14166 = ORIENTED_EDGE('',*,*,#14167,.T.);+#14167 = EDGE_CURVE('',#14145,#14168,#14170,.T.);+#14168 = VERTEX_POINT('',#14169);+#14169 = CARTESIAN_POINT('',(-0.266203556639,1.363114371595E-02,+ 1.1500001));+#14170 = SURFACE_CURVE('',#14171,(#14175,#14182),.PCURVE_S1.);+#14171 = LINE('',#14172,#14173);+#14172 = CARTESIAN_POINT('',(-0.266203556639,6.213265507733E-02,+ 1.1500001));+#14173 = VECTOR('',#14174,1.);+#14174 = DIRECTION('',(0.,-1.,0.));+#14175 = PCURVE('',#14083,#14176);+#14176 = DEFINITIONAL_REPRESENTATION('',(#14177),#14181);+#14177 = LINE('',#14178,#14179);+#14178 = CARTESIAN_POINT('',(2.694528408966E-02,0.118321497488));+#14179 = VECTOR('',#14180,1.);+#14180 = DIRECTION('',(0.,-1.));+#14181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14182 = PCURVE('',#2945,#14183);+#14183 = DEFINITIONAL_REPRESENTATION('',(#14184),#14188);+#14184 = LINE('',#14185,#14186);+#14185 = CARTESIAN_POINT('',(0.,-0.1));+#14186 = VECTOR('',#14187,1.);+#14187 = DIRECTION('',(1.,0.));+#14188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14189 = ORIENTED_EDGE('',*,*,#14190,.T.);+#14190 = EDGE_CURVE('',#14168,#14191,#14193,.T.);+#14191 = VERTEX_POINT('',#14192);+#14192 = CARTESIAN_POINT('',(-0.222377844575,1.363114371595E-02,+ 1.1500001));+#14193 = SURFACE_CURVE('',#14194,(#14198,#14205),.PCURVE_S1.);+#14194 = LINE('',#14195,#14196);+#14195 = CARTESIAN_POINT('',(-0.266203556639,1.363114371595E-02,+ 1.1500001));+#14196 = VECTOR('',#14197,1.);+#14197 = DIRECTION('',(1.,0.,0.));+#14198 = PCURVE('',#14083,#14199);+#14199 = DEFINITIONAL_REPRESENTATION('',(#14200),#14204);+#14200 = LINE('',#14201,#14202);+#14201 = CARTESIAN_POINT('',(2.694528408966E-02,6.981998612644E-02));+#14202 = VECTOR('',#14203,1.);+#14203 = DIRECTION('',(1.,0.));+#14204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14205 = PCURVE('',#2972,#14206);+#14206 = DEFINITIONAL_REPRESENTATION('',(#14207),#14211);+#14207 = LINE('',#14208,#14209);+#14208 = CARTESIAN_POINT('',(0.,-0.1));+#14209 = VECTOR('',#14210,1.);+#14210 = DIRECTION('',(1.,0.));+#14211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14212 = ORIENTED_EDGE('',*,*,#14213,.T.);+#14213 = EDGE_CURVE('',#14191,#14214,#14216,.T.);+#14214 = VERTEX_POINT('',#14215);+#14215 = CARTESIAN_POINT('',(-0.222377844575,6.213265507733E-02,+ 1.1500001));+#14216 = SURFACE_CURVE('',#14217,(#14221,#14228),.PCURVE_S1.);+#14217 = LINE('',#14218,#14219);+#14218 = CARTESIAN_POINT('',(-0.222377844575,1.363114371595E-02,+ 1.1500001));+#14219 = VECTOR('',#14220,1.);+#14220 = DIRECTION('',(0.,1.,0.));+#14221 = PCURVE('',#14083,#14222);+#14222 = DEFINITIONAL_REPRESENTATION('',(#14223),#14227);+#14223 = LINE('',#14224,#14225);+#14224 = CARTESIAN_POINT('',(7.077099615313E-02,6.981998612644E-02));+#14225 = VECTOR('',#14226,1.);+#14226 = DIRECTION('',(0.,1.));+#14227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14228 = PCURVE('',#2999,#14229);+#14229 = DEFINITIONAL_REPRESENTATION('',(#14230),#14234);+#14230 = LINE('',#14231,#14232);+#14231 = CARTESIAN_POINT('',(0.,-0.1));+#14232 = VECTOR('',#14233,1.);+#14233 = DIRECTION('',(1.,0.));+#14234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14235 = ORIENTED_EDGE('',*,*,#14236,.T.);+#14236 = EDGE_CURVE('',#14214,#14237,#14239,.T.);+#14237 = VERTEX_POINT('',#14238);+#14238 = CARTESIAN_POINT('',(-0.206289924957,6.213265507733E-02,+ 1.1500001));+#14239 = SURFACE_CURVE('',#14240,(#14244,#14251),.PCURVE_S1.);+#14240 = LINE('',#14241,#14242);+#14241 = CARTESIAN_POINT('',(-0.222377844575,6.213265507733E-02,+ 1.1500001));+#14242 = VECTOR('',#14243,1.);+#14243 = DIRECTION('',(1.,0.,0.));+#14244 = PCURVE('',#14083,#14245);+#14245 = DEFINITIONAL_REPRESENTATION('',(#14246),#14250);+#14246 = LINE('',#14247,#14248);+#14247 = CARTESIAN_POINT('',(7.077099615313E-02,0.118321497488));+#14248 = VECTOR('',#14249,1.);+#14249 = DIRECTION('',(1.,0.));+#14250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14251 = PCURVE('',#3026,#14252);+#14252 = DEFINITIONAL_REPRESENTATION('',(#14253),#14257);+#14253 = LINE('',#14254,#14255);+#14254 = CARTESIAN_POINT('',(0.,-0.1));+#14255 = VECTOR('',#14256,1.);+#14256 = DIRECTION('',(1.,0.));+#14257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14258 = ORIENTED_EDGE('',*,*,#14259,.T.);+#14259 = EDGE_CURVE('',#14237,#14260,#14262,.T.);+#14260 = VERTEX_POINT('',#14261);+#14261 = CARTESIAN_POINT('',(-0.206289924957,-5.618884241049E-02,+ 1.1500001));+#14262 = SURFACE_CURVE('',#14263,(#14267,#14274),.PCURVE_S1.);+#14263 = LINE('',#14264,#14265);+#14264 = CARTESIAN_POINT('',(-0.206289924957,6.213265507733E-02,+ 1.1500001));+#14265 = VECTOR('',#14266,1.);+#14266 = DIRECTION('',(0.,-1.,0.));+#14267 = PCURVE('',#14083,#14268);+#14268 = DEFINITIONAL_REPRESENTATION('',(#14269),#14273);+#14269 = LINE('',#14270,#14271);+#14270 = CARTESIAN_POINT('',(8.685891577137E-02,0.118321497488));+#14271 = VECTOR('',#14272,1.);+#14272 = DIRECTION('',(0.,-1.));+#14273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14274 = PCURVE('',#3053,#14275);+#14275 = DEFINITIONAL_REPRESENTATION('',(#14276),#14280);+#14276 = LINE('',#14277,#14278);+#14277 = CARTESIAN_POINT('',(0.,-0.1));+#14278 = VECTOR('',#14279,1.);+#14279 = DIRECTION('',(1.,0.));+#14280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14281 = ORIENTED_EDGE('',*,*,#14282,.T.);+#14282 = EDGE_CURVE('',#14260,#14283,#14285,.T.);+#14283 = VERTEX_POINT('',#14284);+#14284 = CARTESIAN_POINT('',(-0.222377844575,-5.618884241049E-02,+ 1.1500001));+#14285 = SURFACE_CURVE('',#14286,(#14290,#14297),.PCURVE_S1.);+#14286 = LINE('',#14287,#14288);+#14287 = CARTESIAN_POINT('',(-0.206289924957,-5.618884241049E-02,+ 1.1500001));+#14288 = VECTOR('',#14289,1.);+#14289 = DIRECTION('',(-1.,0.,0.));+#14290 = PCURVE('',#14083,#14291);+#14291 = DEFINITIONAL_REPRESENTATION('',(#14292),#14296);+#14292 = LINE('',#14293,#14294);+#14293 = CARTESIAN_POINT('',(8.685891577137E-02,0.));+#14294 = VECTOR('',#14295,1.);+#14295 = DIRECTION('',(-1.,0.));+#14296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14297 = PCURVE('',#3080,#14298);+#14298 = DEFINITIONAL_REPRESENTATION('',(#14299),#14303);+#14299 = LINE('',#14300,#14301);+#14300 = CARTESIAN_POINT('',(0.,-0.1));+#14301 = VECTOR('',#14302,1.);+#14302 = DIRECTION('',(1.,0.));+#14303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14304 = ORIENTED_EDGE('',*,*,#14305,.T.);+#14305 = EDGE_CURVE('',#14283,#14306,#14308,.T.);+#14306 = VERTEX_POINT('',#14307);+#14307 = CARTESIAN_POINT('',(-0.222377844575,1.585016711156E-04,+ 1.1500001));+#14308 = SURFACE_CURVE('',#14309,(#14313,#14320),.PCURVE_S1.);+#14309 = LINE('',#14310,#14311);+#14310 = CARTESIAN_POINT('',(-0.222377844575,-5.618884241049E-02,+ 1.1500001));+#14311 = VECTOR('',#14312,1.);+#14312 = DIRECTION('',(0.,1.,0.));+#14313 = PCURVE('',#14083,#14314);+#14314 = DEFINITIONAL_REPRESENTATION('',(#14315),#14319);+#14315 = LINE('',#14316,#14317);+#14316 = CARTESIAN_POINT('',(7.077099615313E-02,0.));+#14317 = VECTOR('',#14318,1.);+#14318 = DIRECTION('',(0.,1.));+#14319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14320 = PCURVE('',#3107,#14321);+#14321 = DEFINITIONAL_REPRESENTATION('',(#14322),#14326);+#14322 = LINE('',#14323,#14324);+#14323 = CARTESIAN_POINT('',(0.,-0.1));+#14324 = VECTOR('',#14325,1.);+#14325 = DIRECTION('',(1.,0.));+#14326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14327 = ORIENTED_EDGE('',*,*,#14328,.T.);+#14328 = EDGE_CURVE('',#14306,#14045,#14329,.T.);+#14329 = SURFACE_CURVE('',#14330,(#14334,#14341),.PCURVE_S1.);+#14330 = LINE('',#14331,#14332);+#14331 = CARTESIAN_POINT('',(-0.222377844575,1.585016711156E-04,+ 1.1500001));+#14332 = VECTOR('',#14333,1.);+#14333 = DIRECTION('',(-1.,0.,0.));+#14334 = PCURVE('',#14083,#14335);+#14335 = DEFINITIONAL_REPRESENTATION('',(#14336),#14340);+#14336 = LINE('',#14337,#14338);+#14337 = CARTESIAN_POINT('',(7.077099615313E-02,5.634734408161E-02));+#14338 = VECTOR('',#14339,1.);+#14339 = DIRECTION('',(-1.,0.));+#14340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14341 = PCURVE('',#3134,#14342);+#14342 = DEFINITIONAL_REPRESENTATION('',(#14343),#14347);+#14343 = LINE('',#14344,#14345);+#14344 = CARTESIAN_POINT('',(0.,-0.1));+#14345 = VECTOR('',#14346,1.);+#14346 = DIRECTION('',(1.,0.));+#14347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14348 = ORIENTED_EDGE('',*,*,#14067,.T.);+#14349 = ORIENTED_EDGE('',*,*,#14350,.T.);+#14350 = EDGE_CURVE('',#14068,#14120,#14351,.T.);+#14351 = SURFACE_CURVE('',#14352,(#14356,#14363),.PCURVE_S1.);+#14352 = LINE('',#14353,#14354);+#14353 = CARTESIAN_POINT('',(-0.266203556639,-5.618884241049E-02,+ 1.1500001));+#14354 = VECTOR('',#14355,1.);+#14355 = DIRECTION('',(-1.,0.,0.));+#14356 = PCURVE('',#14083,#14357);+#14357 = DEFINITIONAL_REPRESENTATION('',(#14358),#14362);+#14358 = LINE('',#14359,#14360);+#14359 = CARTESIAN_POINT('',(2.694528408966E-02,0.));+#14360 = VECTOR('',#14361,1.);+#14361 = DIRECTION('',(-1.,0.));+#14362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14363 = PCURVE('',#2864,#14364);+#14364 = DEFINITIONAL_REPRESENTATION('',(#14365),#14369);+#14365 = LINE('',#14366,#14367);+#14366 = CARTESIAN_POINT('',(0.,-0.1));+#14367 = VECTOR('',#14368,1.);+#14368 = DIRECTION('',(1.,0.));+#14369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14370 = ADVANCED_FACE('',(#14371),#3134,.T.);+#14371 = FACE_BOUND('',#14372,.T.);+#14372 = EDGE_LOOP('',(#14373,#14374,#14395,#14396));+#14373 = ORIENTED_EDGE('',*,*,#3118,.F.);+#14374 = ORIENTED_EDGE('',*,*,#14375,.T.);+#14375 = EDGE_CURVE('',#3092,#14306,#14376,.T.);+#14376 = SURFACE_CURVE('',#14377,(#14381,#14388),.PCURVE_S1.);+#14377 = LINE('',#14378,#14379);+#14378 = CARTESIAN_POINT('',(-0.222377844575,1.585016711156E-04,+ 1.2500001));+#14379 = VECTOR('',#14380,1.);+#14380 = DIRECTION('',(-0.,-0.,-1.));+#14381 = PCURVE('',#3134,#14382);+#14382 = DEFINITIONAL_REPRESENTATION('',(#14383),#14387);+#14383 = LINE('',#14384,#14385);+#14384 = CARTESIAN_POINT('',(0.,0.));+#14385 = VECTOR('',#14386,1.);+#14386 = DIRECTION('',(0.,-1.));+#14387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14388 = PCURVE('',#3107,#14389);+#14389 = DEFINITIONAL_REPRESENTATION('',(#14390),#14394);+#14390 = LINE('',#14391,#14392);+#14391 = CARTESIAN_POINT('',(5.634734408161E-02,0.));+#14392 = VECTOR('',#14393,1.);+#14393 = DIRECTION('',(0.,-1.));+#14394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14395 = ORIENTED_EDGE('',*,*,#14328,.T.);+#14396 = ORIENTED_EDGE('',*,*,#14044,.F.);+#14397 = ADVANCED_FACE('',(#14398),#3107,.T.);+#14398 = FACE_BOUND('',#14399,.T.);+#14399 = EDGE_LOOP('',(#14400,#14401,#14422,#14423));+#14400 = ORIENTED_EDGE('',*,*,#3091,.F.);+#14401 = ORIENTED_EDGE('',*,*,#14402,.T.);+#14402 = EDGE_CURVE('',#3065,#14283,#14403,.T.);+#14403 = SURFACE_CURVE('',#14404,(#14408,#14415),.PCURVE_S1.);+#14404 = LINE('',#14405,#14406);+#14405 = CARTESIAN_POINT('',(-0.222377844575,-5.618884241049E-02,+ 1.2500001));+#14406 = VECTOR('',#14407,1.);+#14407 = DIRECTION('',(-0.,-0.,-1.));+#14408 = PCURVE('',#3107,#14409);+#14409 = DEFINITIONAL_REPRESENTATION('',(#14410),#14414);+#14410 = LINE('',#14411,#14412);+#14411 = CARTESIAN_POINT('',(0.,0.));+#14412 = VECTOR('',#14413,1.);+#14413 = DIRECTION('',(0.,-1.));+#14414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14415 = PCURVE('',#3080,#14416);+#14416 = DEFINITIONAL_REPRESENTATION('',(#14417),#14421);+#14417 = LINE('',#14418,#14419);+#14418 = CARTESIAN_POINT('',(1.608791961824E-02,0.));+#14419 = VECTOR('',#14420,1.);+#14420 = DIRECTION('',(0.,-1.));+#14421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14422 = ORIENTED_EDGE('',*,*,#14305,.T.);+#14423 = ORIENTED_EDGE('',*,*,#14375,.F.);+#14424 = ADVANCED_FACE('',(#14425),#3080,.T.);+#14425 = FACE_BOUND('',#14426,.T.);+#14426 = EDGE_LOOP('',(#14427,#14428,#14449,#14450));+#14427 = ORIENTED_EDGE('',*,*,#3064,.F.);+#14428 = ORIENTED_EDGE('',*,*,#14429,.T.);+#14429 = EDGE_CURVE('',#3038,#14260,#14430,.T.);+#14430 = SURFACE_CURVE('',#14431,(#14435,#14442),.PCURVE_S1.);+#14431 = LINE('',#14432,#14433);+#14432 = CARTESIAN_POINT('',(-0.206289924957,-5.618884241049E-02,+ 1.2500001));+#14433 = VECTOR('',#14434,1.);+#14434 = DIRECTION('',(-0.,-0.,-1.));+#14435 = PCURVE('',#3080,#14436);+#14436 = DEFINITIONAL_REPRESENTATION('',(#14437),#14441);+#14437 = LINE('',#14438,#14439);+#14438 = CARTESIAN_POINT('',(0.,0.));+#14439 = VECTOR('',#14440,1.);+#14440 = DIRECTION('',(0.,-1.));+#14441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14442 = PCURVE('',#3053,#14443);+#14443 = DEFINITIONAL_REPRESENTATION('',(#14444),#14448);+#14444 = LINE('',#14445,#14446);+#14445 = CARTESIAN_POINT('',(0.118321497488,0.));+#14446 = VECTOR('',#14447,1.);+#14447 = DIRECTION('',(0.,-1.));+#14448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14449 = ORIENTED_EDGE('',*,*,#14282,.T.);+#14450 = ORIENTED_EDGE('',*,*,#14402,.F.);+#14451 = ADVANCED_FACE('',(#14452),#3053,.T.);+#14452 = FACE_BOUND('',#14453,.T.);+#14453 = EDGE_LOOP('',(#14454,#14455,#14476,#14477));+#14454 = ORIENTED_EDGE('',*,*,#3037,.F.);+#14455 = ORIENTED_EDGE('',*,*,#14456,.T.);+#14456 = EDGE_CURVE('',#3011,#14237,#14457,.T.);+#14457 = SURFACE_CURVE('',#14458,(#14462,#14469),.PCURVE_S1.);+#14458 = LINE('',#14459,#14460);+#14459 = CARTESIAN_POINT('',(-0.206289924957,6.213265507733E-02,+ 1.2500001));+#14460 = VECTOR('',#14461,1.);+#14461 = DIRECTION('',(-0.,-0.,-1.));+#14462 = PCURVE('',#3053,#14463);+#14463 = DEFINITIONAL_REPRESENTATION('',(#14464),#14468);+#14464 = LINE('',#14465,#14466);+#14465 = CARTESIAN_POINT('',(0.,0.));+#14466 = VECTOR('',#14467,1.);+#14467 = DIRECTION('',(0.,-1.));+#14468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14469 = PCURVE('',#3026,#14470);+#14470 = DEFINITIONAL_REPRESENTATION('',(#14471),#14475);+#14471 = LINE('',#14472,#14473);+#14472 = CARTESIAN_POINT('',(1.608791961824E-02,0.));+#14473 = VECTOR('',#14474,1.);+#14474 = DIRECTION('',(0.,-1.));+#14475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14476 = ORIENTED_EDGE('',*,*,#14259,.T.);+#14477 = ORIENTED_EDGE('',*,*,#14429,.F.);+#14478 = ADVANCED_FACE('',(#14479),#3026,.T.);+#14479 = FACE_BOUND('',#14480,.T.);+#14480 = EDGE_LOOP('',(#14481,#14482,#14503,#14504));+#14481 = ORIENTED_EDGE('',*,*,#3010,.F.);+#14482 = ORIENTED_EDGE('',*,*,#14483,.T.);+#14483 = EDGE_CURVE('',#2984,#14214,#14484,.T.);+#14484 = SURFACE_CURVE('',#14485,(#14489,#14496),.PCURVE_S1.);+#14485 = LINE('',#14486,#14487);+#14486 = CARTESIAN_POINT('',(-0.222377844575,6.213265507733E-02,+ 1.2500001));+#14487 = VECTOR('',#14488,1.);+#14488 = DIRECTION('',(-0.,-0.,-1.));+#14489 = PCURVE('',#3026,#14490);+#14490 = DEFINITIONAL_REPRESENTATION('',(#14491),#14495);+#14491 = LINE('',#14492,#14493);+#14492 = CARTESIAN_POINT('',(0.,0.));+#14493 = VECTOR('',#14494,1.);+#14494 = DIRECTION('',(0.,-1.));+#14495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14496 = PCURVE('',#2999,#14497);+#14497 = DEFINITIONAL_REPRESENTATION('',(#14498),#14502);+#14498 = LINE('',#14499,#14500);+#14499 = CARTESIAN_POINT('',(4.850151136139E-02,0.));+#14500 = VECTOR('',#14501,1.);+#14501 = DIRECTION('',(0.,-1.));+#14502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14503 = ORIENTED_EDGE('',*,*,#14236,.T.);+#14504 = ORIENTED_EDGE('',*,*,#14456,.F.);+#14505 = ADVANCED_FACE('',(#14506),#2999,.T.);+#14506 = FACE_BOUND('',#14507,.T.);+#14507 = EDGE_LOOP('',(#14508,#14509,#14530,#14531));+#14508 = ORIENTED_EDGE('',*,*,#2983,.F.);+#14509 = ORIENTED_EDGE('',*,*,#14510,.T.);+#14510 = EDGE_CURVE('',#2957,#14191,#14511,.T.);+#14511 = SURFACE_CURVE('',#14512,(#14516,#14523),.PCURVE_S1.);+#14512 = LINE('',#14513,#14514);+#14513 = CARTESIAN_POINT('',(-0.222377844575,1.363114371595E-02,+ 1.2500001));+#14514 = VECTOR('',#14515,1.);+#14515 = DIRECTION('',(-0.,-0.,-1.));+#14516 = PCURVE('',#2999,#14517);+#14517 = DEFINITIONAL_REPRESENTATION('',(#14518),#14522);+#14518 = LINE('',#14519,#14520);+#14519 = CARTESIAN_POINT('',(0.,0.));+#14520 = VECTOR('',#14521,1.);+#14521 = DIRECTION('',(0.,-1.));+#14522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14523 = PCURVE('',#2972,#14524);+#14524 = DEFINITIONAL_REPRESENTATION('',(#14525),#14529);+#14525 = LINE('',#14526,#14527);+#14526 = CARTESIAN_POINT('',(4.382571206347E-02,0.));+#14527 = VECTOR('',#14528,1.);+#14528 = DIRECTION('',(0.,-1.));+#14529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14530 = ORIENTED_EDGE('',*,*,#14213,.T.);+#14531 = ORIENTED_EDGE('',*,*,#14483,.F.);+#14532 = ADVANCED_FACE('',(#14533),#2972,.T.);+#14533 = FACE_BOUND('',#14534,.T.);+#14534 = EDGE_LOOP('',(#14535,#14536,#14557,#14558));+#14535 = ORIENTED_EDGE('',*,*,#2956,.F.);+#14536 = ORIENTED_EDGE('',*,*,#14537,.T.);+#14537 = EDGE_CURVE('',#2930,#14168,#14538,.T.);+#14538 = SURFACE_CURVE('',#14539,(#14543,#14550),.PCURVE_S1.);+#14539 = LINE('',#14540,#14541);+#14540 = CARTESIAN_POINT('',(-0.266203556639,1.363114371595E-02,+ 1.2500001));+#14541 = VECTOR('',#14542,1.);+#14542 = DIRECTION('',(-0.,-0.,-1.));+#14543 = PCURVE('',#2972,#14544);+#14544 = DEFINITIONAL_REPRESENTATION('',(#14545),#14549);+#14545 = LINE('',#14546,#14547);+#14546 = CARTESIAN_POINT('',(0.,0.));+#14547 = VECTOR('',#14548,1.);+#14548 = DIRECTION('',(0.,-1.));+#14549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14550 = PCURVE('',#2945,#14551);+#14551 = DEFINITIONAL_REPRESENTATION('',(#14552),#14556);+#14552 = LINE('',#14553,#14554);+#14553 = CARTESIAN_POINT('',(4.850151136139E-02,0.));+#14554 = VECTOR('',#14555,1.);+#14555 = DIRECTION('',(0.,-1.));+#14556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14557 = ORIENTED_EDGE('',*,*,#14190,.T.);+#14558 = ORIENTED_EDGE('',*,*,#14510,.F.);+#14559 = ADVANCED_FACE('',(#14560),#2945,.T.);+#14560 = FACE_BOUND('',#14561,.T.);+#14561 = EDGE_LOOP('',(#14562,#14563,#14584,#14585));+#14562 = ORIENTED_EDGE('',*,*,#2929,.F.);+#14563 = ORIENTED_EDGE('',*,*,#14564,.T.);+#14564 = EDGE_CURVE('',#2903,#14145,#14565,.T.);+#14565 = SURFACE_CURVE('',#14566,(#14570,#14577),.PCURVE_S1.);+#14566 = LINE('',#14567,#14568);+#14567 = CARTESIAN_POINT('',(-0.266203556639,6.213265507733E-02,+ 1.2500001));+#14568 = VECTOR('',#14569,1.);+#14569 = DIRECTION('',(-0.,-0.,-1.));+#14570 = PCURVE('',#2945,#14571);+#14571 = DEFINITIONAL_REPRESENTATION('',(#14572),#14576);+#14572 = LINE('',#14573,#14574);+#14573 = CARTESIAN_POINT('',(0.,0.));+#14574 = VECTOR('',#14575,1.);+#14575 = DIRECTION('',(0.,-1.));+#14576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14577 = PCURVE('',#2918,#14578);+#14578 = DEFINITIONAL_REPRESENTATION('',(#14579),#14583);+#14579 = LINE('',#14580,#14581);+#14580 = CARTESIAN_POINT('',(1.608791961824E-02,0.));+#14581 = VECTOR('',#14582,1.);+#14582 = DIRECTION('',(0.,-1.));+#14583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14584 = ORIENTED_EDGE('',*,*,#14167,.T.);+#14585 = ORIENTED_EDGE('',*,*,#14537,.F.);+#14586 = ADVANCED_FACE('',(#14587),#2918,.T.);+#14587 = FACE_BOUND('',#14588,.T.);+#14588 = EDGE_LOOP('',(#14589,#14590,#14611,#14612));+#14589 = ORIENTED_EDGE('',*,*,#2902,.F.);+#14590 = ORIENTED_EDGE('',*,*,#14591,.T.);+#14591 = EDGE_CURVE('',#2876,#14122,#14592,.T.);+#14592 = SURFACE_CURVE('',#14593,(#14597,#14604),.PCURVE_S1.);+#14593 = LINE('',#14594,#14595);+#14594 = CARTESIAN_POINT('',(-0.282291476257,6.213265507733E-02,+ 1.2500001));+#14595 = VECTOR('',#14596,1.);+#14596 = DIRECTION('',(-0.,-0.,-1.));+#14597 = PCURVE('',#2918,#14598);+#14598 = DEFINITIONAL_REPRESENTATION('',(#14599),#14603);+#14599 = LINE('',#14600,#14601);+#14600 = CARTESIAN_POINT('',(0.,0.));+#14601 = VECTOR('',#14602,1.);+#14602 = DIRECTION('',(0.,-1.));+#14603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14604 = PCURVE('',#2891,#14605);+#14605 = DEFINITIONAL_REPRESENTATION('',(#14606),#14610);+#14606 = LINE('',#14607,#14608);+#14607 = CARTESIAN_POINT('',(0.118321497488,0.));+#14608 = VECTOR('',#14609,1.);+#14609 = DIRECTION('',(0.,-1.));+#14610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14611 = ORIENTED_EDGE('',*,*,#14144,.T.);+#14612 = ORIENTED_EDGE('',*,*,#14564,.F.);+#14613 = ADVANCED_FACE('',(#14614),#2891,.T.);+#14614 = FACE_BOUND('',#14615,.T.);+#14615 = EDGE_LOOP('',(#14616,#14617,#14638,#14639));+#14616 = ORIENTED_EDGE('',*,*,#2875,.F.);+#14617 = ORIENTED_EDGE('',*,*,#14618,.T.);+#14618 = EDGE_CURVE('',#2849,#14120,#14619,.T.);+#14619 = SURFACE_CURVE('',#14620,(#14624,#14631),.PCURVE_S1.);+#14620 = LINE('',#14621,#14622);+#14621 = CARTESIAN_POINT('',(-0.282291476257,-5.618884241049E-02,+ 1.2500001));+#14622 = VECTOR('',#14623,1.);+#14623 = DIRECTION('',(-0.,-0.,-1.));+#14624 = PCURVE('',#2891,#14625);+#14625 = DEFINITIONAL_REPRESENTATION('',(#14626),#14630);+#14626 = LINE('',#14627,#14628);+#14627 = CARTESIAN_POINT('',(0.,0.));+#14628 = VECTOR('',#14629,1.);+#14629 = DIRECTION('',(0.,-1.));+#14630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14631 = PCURVE('',#2864,#14632);+#14632 = DEFINITIONAL_REPRESENTATION('',(#14633),#14637);+#14633 = LINE('',#14634,#14635);+#14634 = CARTESIAN_POINT('',(1.608791961824E-02,0.));+#14635 = VECTOR('',#14636,1.);+#14636 = DIRECTION('',(0.,-1.));+#14637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14638 = ORIENTED_EDGE('',*,*,#14119,.T.);+#14639 = ORIENTED_EDGE('',*,*,#14591,.F.);+#14640 = ADVANCED_FACE('',(#14641),#2864,.T.);+#14641 = FACE_BOUND('',#14642,.T.);+#14642 = EDGE_LOOP('',(#14643,#14644,#14645,#14646));+#14643 = ORIENTED_EDGE('',*,*,#2846,.F.);+#14644 = ORIENTED_EDGE('',*,*,#14095,.T.);+#14645 = ORIENTED_EDGE('',*,*,#14350,.T.);+#14646 = ORIENTED_EDGE('',*,*,#14618,.F.);+#14647 = ADVANCED_FACE('',(#14648),#2833,.T.);+#14648 = FACE_BOUND('',#14649,.T.);+#14649 = EDGE_LOOP('',(#14650,#14651,#14674,#14702));+#14650 = ORIENTED_EDGE('',*,*,#2819,.F.);+#14651 = ORIENTED_EDGE('',*,*,#14652,.T.);+#14652 = EDGE_CURVE('',#2793,#14653,#14655,.T.);+#14653 = VERTEX_POINT('',#14654);+#14654 = CARTESIAN_POINT('',(-0.349971689823,-5.618884241049E-02,+ 1.1500001));+#14655 = SURFACE_CURVE('',#14656,(#14660,#14667),.PCURVE_S1.);+#14656 = LINE('',#14657,#14658);+#14657 = CARTESIAN_POINT('',(-0.349971689823,-5.618884241049E-02,+ 1.2500001));+#14658 = VECTOR('',#14659,1.);+#14659 = DIRECTION('',(-0.,-0.,-1.));+#14660 = PCURVE('',#2833,#14661);+#14661 = DEFINITIONAL_REPRESENTATION('',(#14662),#14666);+#14662 = LINE('',#14663,#14664);+#14663 = CARTESIAN_POINT('',(0.,0.));+#14664 = VECTOR('',#14665,1.);+#14665 = DIRECTION('',(0.,-1.));+#14666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14667 = PCURVE('',#2808,#14668);+#14668 = DEFINITIONAL_REPRESENTATION('',(#14669),#14673);+#14669 = LINE('',#14670,#14671);+#14670 = CARTESIAN_POINT('',(1.608791961824E-02,0.));+#14671 = VECTOR('',#14672,1.);+#14672 = DIRECTION('',(0.,-1.));+#14673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14674 = ORIENTED_EDGE('',*,*,#14675,.T.);+#14675 = EDGE_CURVE('',#14653,#14676,#14678,.T.);+#14676 = VERTEX_POINT('',#14677);+#14677 = CARTESIAN_POINT('',(-0.349971689823,4.86600130325E-02,1.1500001+ ));+#14678 = SURFACE_CURVE('',#14679,(#14683,#14690),.PCURVE_S1.);+#14679 = LINE('',#14680,#14681);+#14680 = CARTESIAN_POINT('',(-0.349971689823,-5.618884241049E-02,+ 1.1500001));+#14681 = VECTOR('',#14682,1.);+#14682 = DIRECTION('',(0.,1.,0.));+#14683 = PCURVE('',#2833,#14684);+#14684 = DEFINITIONAL_REPRESENTATION('',(#14685),#14689);+#14685 = LINE('',#14686,#14687);+#14686 = CARTESIAN_POINT('',(0.,-0.1));+#14687 = VECTOR('',#14688,1.);+#14688 = DIRECTION('',(1.,0.));+#14689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14690 = PCURVE('',#14691,#14696);+#14691 = PLANE('',#14692);+#14692 = AXIS2_PLACEMENT_3D('',#14693,#14694,#14695);+#14693 = CARTESIAN_POINT('',(-0.390865120971,-5.618884241049E-02,+ 1.1500001));+#14694 = DIRECTION('',(0.,0.,1.));+#14695 = DIRECTION('',(1.,0.,0.));+#14696 = DEFINITIONAL_REPRESENTATION('',(#14697),#14701);+#14697 = LINE('',#14698,#14699);+#14698 = CARTESIAN_POINT('',(4.089343114784E-02,0.));+#14699 = VECTOR('',#14700,1.);+#14700 = DIRECTION('',(0.,1.));+#14701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14702 = ORIENTED_EDGE('',*,*,#14703,.F.);+#14703 = EDGE_CURVE('',#2629,#14676,#14704,.T.);+#14704 = SURFACE_CURVE('',#14705,(#14709,#14716),.PCURVE_S1.);+#14705 = LINE('',#14706,#14707);+#14706 = CARTESIAN_POINT('',(-0.349971689823,4.86600130325E-02,1.2500001+ ));+#14707 = VECTOR('',#14708,1.);+#14708 = DIRECTION('',(-0.,-0.,-1.));+#14709 = PCURVE('',#2833,#14710);+#14710 = DEFINITIONAL_REPRESENTATION('',(#14711),#14715);+#14711 = LINE('',#14712,#14713);+#14712 = CARTESIAN_POINT('',(0.104848855443,0.));+#14713 = VECTOR('',#14714,1.);+#14714 = DIRECTION('',(0.,-1.));+#14715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14716 = PCURVE('',#2646,#14717);+#14717 = DEFINITIONAL_REPRESENTATION('',(#14718),#14722);+#14718 = LINE('',#14719,#14720);+#14719 = CARTESIAN_POINT('',(0.,0.));+#14720 = VECTOR('',#14721,1.);+#14721 = DIRECTION('',(0.,-1.));+#14722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14723 = ADVANCED_FACE('',(#14724),#14691,.T.);+#14724 = FACE_BOUND('',#14725,.F.);+#14725 = EDGE_LOOP('',(#14726,#14751,#14774,#14797,#14820,#14843,#14864,+ #14865));+#14726 = ORIENTED_EDGE('',*,*,#14727,.T.);+#14727 = EDGE_CURVE('',#14728,#14730,#14732,.T.);+#14728 = VERTEX_POINT('',#14729);+#14729 = CARTESIAN_POINT('',(-0.3871403317,4.86600130325E-02,1.1500001)+ );+#14730 = VERTEX_POINT('',#14731);+#14731 = CARTESIAN_POINT('',(-0.3871403317,6.213265507733E-02,1.1500001)+ );+#14732 = SURFACE_CURVE('',#14733,(#14737,#14744),.PCURVE_S1.);+#14733 = LINE('',#14734,#14735);+#14734 = CARTESIAN_POINT('',(-0.3871403317,4.86600130325E-02,1.1500001)+ );+#14735 = VECTOR('',#14736,1.);+#14736 = DIRECTION('',(0.,1.,0.));+#14737 = PCURVE('',#14691,#14738);+#14738 = DEFINITIONAL_REPRESENTATION('',(#14739),#14743);+#14739 = LINE('',#14740,#14741);+#14740 = CARTESIAN_POINT('',(3.724789271218E-03,0.104848855443));+#14741 = VECTOR('',#14742,1.);+#14742 = DIRECTION('',(0.,1.));+#14743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14744 = PCURVE('',#2673,#14745);+#14745 = DEFINITIONAL_REPRESENTATION('',(#14746),#14750);+#14746 = LINE('',#14747,#14748);+#14747 = CARTESIAN_POINT('',(0.,-0.1));+#14748 = VECTOR('',#14749,1.);+#14749 = DIRECTION('',(1.,0.));+#14750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14751 = ORIENTED_EDGE('',*,*,#14752,.T.);+#14752 = EDGE_CURVE('',#14730,#14753,#14755,.T.);+#14753 = VERTEX_POINT('',#14754);+#14754 = CARTESIAN_POINT('',(-0.29687363,6.213265507733E-02,1.1500001));+#14755 = SURFACE_CURVE('',#14756,(#14760,#14767),.PCURVE_S1.);+#14756 = LINE('',#14757,#14758);+#14757 = CARTESIAN_POINT('',(-0.3871403317,6.213265507733E-02,1.1500001)+ );+#14758 = VECTOR('',#14759,1.);+#14759 = DIRECTION('',(1.,0.,0.));+#14760 = PCURVE('',#14691,#14761);+#14761 = DEFINITIONAL_REPRESENTATION('',(#14762),#14766);+#14762 = LINE('',#14763,#14764);+#14763 = CARTESIAN_POINT('',(3.724789271218E-03,0.118321497488));+#14764 = VECTOR('',#14765,1.);+#14765 = DIRECTION('',(1.,0.));+#14766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14767 = PCURVE('',#2700,#14768);+#14768 = DEFINITIONAL_REPRESENTATION('',(#14769),#14773);+#14769 = LINE('',#14770,#14771);+#14770 = CARTESIAN_POINT('',(0.,-0.1));+#14771 = VECTOR('',#14772,1.);+#14772 = DIRECTION('',(1.,0.));+#14773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14774 = ORIENTED_EDGE('',*,*,#14775,.T.);+#14775 = EDGE_CURVE('',#14753,#14776,#14778,.T.);+#14776 = VERTEX_POINT('',#14777);+#14777 = CARTESIAN_POINT('',(-0.29687363,4.86600130325E-02,1.1500001));+#14778 = SURFACE_CURVE('',#14779,(#14783,#14790),.PCURVE_S1.);+#14779 = LINE('',#14780,#14781);+#14780 = CARTESIAN_POINT('',(-0.29687363,6.213265507733E-02,1.1500001));+#14781 = VECTOR('',#14782,1.);+#14782 = DIRECTION('',(0.,-1.,0.));+#14783 = PCURVE('',#14691,#14784);+#14784 = DEFINITIONAL_REPRESENTATION('',(#14785),#14789);+#14785 = LINE('',#14786,#14787);+#14786 = CARTESIAN_POINT('',(9.399149097158E-02,0.118321497488));+#14787 = VECTOR('',#14788,1.);+#14788 = DIRECTION('',(0.,-1.));+#14789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14790 = PCURVE('',#2727,#14791);+#14791 = DEFINITIONAL_REPRESENTATION('',(#14792),#14796);+#14792 = LINE('',#14793,#14794);+#14793 = CARTESIAN_POINT('',(0.,-0.1));+#14794 = VECTOR('',#14795,1.);+#14795 = DIRECTION('',(1.,0.));+#14796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14797 = ORIENTED_EDGE('',*,*,#14798,.T.);+#14798 = EDGE_CURVE('',#14776,#14799,#14801,.T.);+#14799 = VERTEX_POINT('',#14800);+#14800 = CARTESIAN_POINT('',(-0.333883770205,4.86600130325E-02,1.1500001+ ));+#14801 = SURFACE_CURVE('',#14802,(#14806,#14813),.PCURVE_S1.);+#14802 = LINE('',#14803,#14804);+#14803 = CARTESIAN_POINT('',(-0.29687363,4.86600130325E-02,1.1500001));+#14804 = VECTOR('',#14805,1.);+#14805 = DIRECTION('',(-1.,0.,0.));+#14806 = PCURVE('',#14691,#14807);+#14807 = DEFINITIONAL_REPRESENTATION('',(#14808),#14812);+#14808 = LINE('',#14809,#14810);+#14809 = CARTESIAN_POINT('',(9.399149097158E-02,0.104848855443));+#14810 = VECTOR('',#14811,1.);+#14811 = DIRECTION('',(-1.,0.));+#14812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14813 = PCURVE('',#2754,#14814);+#14814 = DEFINITIONAL_REPRESENTATION('',(#14815),#14819);+#14815 = LINE('',#14816,#14817);+#14816 = CARTESIAN_POINT('',(0.,-0.1));+#14817 = VECTOR('',#14818,1.);+#14818 = DIRECTION('',(1.,0.));+#14819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14820 = ORIENTED_EDGE('',*,*,#14821,.T.);+#14821 = EDGE_CURVE('',#14799,#14822,#14824,.T.);+#14822 = VERTEX_POINT('',#14823);+#14823 = CARTESIAN_POINT('',(-0.333883770205,-5.618884241049E-02,+ 1.1500001));+#14824 = SURFACE_CURVE('',#14825,(#14829,#14836),.PCURVE_S1.);+#14825 = LINE('',#14826,#14827);+#14826 = CARTESIAN_POINT('',(-0.333883770205,4.86600130325E-02,1.1500001+ ));+#14827 = VECTOR('',#14828,1.);+#14828 = DIRECTION('',(0.,-1.,0.));+#14829 = PCURVE('',#14691,#14830);+#14830 = DEFINITIONAL_REPRESENTATION('',(#14831),#14835);+#14831 = LINE('',#14832,#14833);+#14832 = CARTESIAN_POINT('',(5.698135076607E-02,0.104848855443));+#14833 = VECTOR('',#14834,1.);+#14834 = DIRECTION('',(0.,-1.));+#14835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14836 = PCURVE('',#2781,#14837);+#14837 = DEFINITIONAL_REPRESENTATION('',(#14838),#14842);+#14838 = LINE('',#14839,#14840);+#14839 = CARTESIAN_POINT('',(0.,-0.1));+#14840 = VECTOR('',#14841,1.);+#14841 = DIRECTION('',(1.,0.));+#14842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14843 = ORIENTED_EDGE('',*,*,#14844,.T.);+#14844 = EDGE_CURVE('',#14822,#14653,#14845,.T.);+#14845 = SURFACE_CURVE('',#14846,(#14850,#14857),.PCURVE_S1.);+#14846 = LINE('',#14847,#14848);+#14847 = CARTESIAN_POINT('',(-0.333883770205,-5.618884241049E-02,+ 1.1500001));+#14848 = VECTOR('',#14849,1.);+#14849 = DIRECTION('',(-1.,0.,0.));+#14850 = PCURVE('',#14691,#14851);+#14851 = DEFINITIONAL_REPRESENTATION('',(#14852),#14856);+#14852 = LINE('',#14853,#14854);+#14853 = CARTESIAN_POINT('',(5.698135076607E-02,0.));+#14854 = VECTOR('',#14855,1.);+#14855 = DIRECTION('',(-1.,0.));+#14856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14857 = PCURVE('',#2808,#14858);+#14858 = DEFINITIONAL_REPRESENTATION('',(#14859),#14863);+#14859 = LINE('',#14860,#14861);+#14860 = CARTESIAN_POINT('',(0.,-0.1));+#14861 = VECTOR('',#14862,1.);+#14862 = DIRECTION('',(1.,0.));+#14863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14864 = ORIENTED_EDGE('',*,*,#14675,.T.);+#14865 = ORIENTED_EDGE('',*,*,#14866,.T.);+#14866 = EDGE_CURVE('',#14676,#14728,#14867,.T.);+#14867 = SURFACE_CURVE('',#14868,(#14872,#14879),.PCURVE_S1.);+#14868 = LINE('',#14869,#14870);+#14869 = CARTESIAN_POINT('',(-0.349971689823,4.86600130325E-02,1.1500001+ ));+#14870 = VECTOR('',#14871,1.);+#14871 = DIRECTION('',(-1.,0.,0.));+#14872 = PCURVE('',#14691,#14873);+#14873 = DEFINITIONAL_REPRESENTATION('',(#14874),#14878);+#14874 = LINE('',#14875,#14876);+#14875 = CARTESIAN_POINT('',(4.089343114784E-02,0.104848855443));+#14876 = VECTOR('',#14877,1.);+#14877 = DIRECTION('',(-1.,0.));+#14878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14879 = PCURVE('',#2646,#14880);+#14880 = DEFINITIONAL_REPRESENTATION('',(#14881),#14885);+#14881 = LINE('',#14882,#14883);+#14882 = CARTESIAN_POINT('',(0.,-0.1));+#14883 = VECTOR('',#14884,1.);+#14884 = DIRECTION('',(1.,0.));+#14885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14886 = ADVANCED_FACE('',(#14887),#2808,.T.);+#14887 = FACE_BOUND('',#14888,.T.);+#14888 = EDGE_LOOP('',(#14889,#14890,#14911,#14912));+#14889 = ORIENTED_EDGE('',*,*,#2792,.F.);+#14890 = ORIENTED_EDGE('',*,*,#14891,.T.);+#14891 = EDGE_CURVE('',#2766,#14822,#14892,.T.);+#14892 = SURFACE_CURVE('',#14893,(#14897,#14904),.PCURVE_S1.);+#14893 = LINE('',#14894,#14895);+#14894 = CARTESIAN_POINT('',(-0.333883770205,-5.618884241049E-02,+ 1.2500001));+#14895 = VECTOR('',#14896,1.);+#14896 = DIRECTION('',(-0.,-0.,-1.));+#14897 = PCURVE('',#2808,#14898);+#14898 = DEFINITIONAL_REPRESENTATION('',(#14899),#14903);+#14899 = LINE('',#14900,#14901);+#14900 = CARTESIAN_POINT('',(0.,0.));+#14901 = VECTOR('',#14902,1.);+#14902 = DIRECTION('',(0.,-1.));+#14903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14904 = PCURVE('',#2781,#14905);+#14905 = DEFINITIONAL_REPRESENTATION('',(#14906),#14910);+#14906 = LINE('',#14907,#14908);+#14907 = CARTESIAN_POINT('',(0.104848855443,0.));+#14908 = VECTOR('',#14909,1.);+#14909 = DIRECTION('',(0.,-1.));+#14910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14911 = ORIENTED_EDGE('',*,*,#14844,.T.);+#14912 = ORIENTED_EDGE('',*,*,#14652,.F.);+#14913 = ADVANCED_FACE('',(#14914),#2781,.T.);+#14914 = FACE_BOUND('',#14915,.T.);+#14915 = EDGE_LOOP('',(#14916,#14917,#14938,#14939));+#14916 = ORIENTED_EDGE('',*,*,#2765,.F.);+#14917 = ORIENTED_EDGE('',*,*,#14918,.T.);+#14918 = EDGE_CURVE('',#2739,#14799,#14919,.T.);+#14919 = SURFACE_CURVE('',#14920,(#14924,#14931),.PCURVE_S1.);+#14920 = LINE('',#14921,#14922);+#14921 = CARTESIAN_POINT('',(-0.333883770205,4.86600130325E-02,1.2500001+ ));+#14922 = VECTOR('',#14923,1.);+#14923 = DIRECTION('',(-0.,-0.,-1.));+#14924 = PCURVE('',#2781,#14925);+#14925 = DEFINITIONAL_REPRESENTATION('',(#14926),#14930);+#14926 = LINE('',#14927,#14928);+#14927 = CARTESIAN_POINT('',(0.,0.));+#14928 = VECTOR('',#14929,1.);+#14929 = DIRECTION('',(0.,-1.));+#14930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14931 = PCURVE('',#2754,#14932);+#14932 = DEFINITIONAL_REPRESENTATION('',(#14933),#14937);+#14933 = LINE('',#14934,#14935);+#14934 = CARTESIAN_POINT('',(3.70101402055E-02,0.));+#14935 = VECTOR('',#14936,1.);+#14936 = DIRECTION('',(0.,-1.));+#14937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14938 = ORIENTED_EDGE('',*,*,#14821,.T.);+#14939 = ORIENTED_EDGE('',*,*,#14891,.F.);+#14940 = ADVANCED_FACE('',(#14941),#2754,.T.);+#14941 = FACE_BOUND('',#14942,.T.);+#14942 = EDGE_LOOP('',(#14943,#14944,#14965,#14966));+#14943 = ORIENTED_EDGE('',*,*,#2738,.F.);+#14944 = ORIENTED_EDGE('',*,*,#14945,.T.);+#14945 = EDGE_CURVE('',#2712,#14776,#14946,.T.);+#14946 = SURFACE_CURVE('',#14947,(#14951,#14958),.PCURVE_S1.);+#14947 = LINE('',#14948,#14949);+#14948 = CARTESIAN_POINT('',(-0.29687363,4.86600130325E-02,1.2500001));+#14949 = VECTOR('',#14950,1.);+#14950 = DIRECTION('',(-0.,-0.,-1.));+#14951 = PCURVE('',#2754,#14952);+#14952 = DEFINITIONAL_REPRESENTATION('',(#14953),#14957);+#14953 = LINE('',#14954,#14955);+#14954 = CARTESIAN_POINT('',(0.,0.));+#14955 = VECTOR('',#14956,1.);+#14956 = DIRECTION('',(0.,-1.));+#14957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14958 = PCURVE('',#2727,#14959);+#14959 = DEFINITIONAL_REPRESENTATION('',(#14960),#14964);+#14960 = LINE('',#14961,#14962);+#14961 = CARTESIAN_POINT('',(1.347264204483E-02,0.));+#14962 = VECTOR('',#14963,1.);+#14963 = DIRECTION('',(0.,-1.));+#14964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14965 = ORIENTED_EDGE('',*,*,#14798,.T.);+#14966 = ORIENTED_EDGE('',*,*,#14918,.F.);+#14967 = ADVANCED_FACE('',(#14968),#2727,.T.);+#14968 = FACE_BOUND('',#14969,.T.);+#14969 = EDGE_LOOP('',(#14970,#14971,#14992,#14993));+#14970 = ORIENTED_EDGE('',*,*,#2711,.F.);+#14971 = ORIENTED_EDGE('',*,*,#14972,.T.);+#14972 = EDGE_CURVE('',#2685,#14753,#14973,.T.);+#14973 = SURFACE_CURVE('',#14974,(#14978,#14985),.PCURVE_S1.);+#14974 = LINE('',#14975,#14976);+#14975 = CARTESIAN_POINT('',(-0.29687363,6.213265507733E-02,1.2500001));+#14976 = VECTOR('',#14977,1.);+#14977 = DIRECTION('',(-0.,-0.,-1.));+#14978 = PCURVE('',#2727,#14979);+#14979 = DEFINITIONAL_REPRESENTATION('',(#14980),#14984);+#14980 = LINE('',#14981,#14982);+#14981 = CARTESIAN_POINT('',(0.,0.));+#14982 = VECTOR('',#14983,1.);+#14983 = DIRECTION('',(0.,-1.));+#14984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14985 = PCURVE('',#2700,#14986);+#14986 = DEFINITIONAL_REPRESENTATION('',(#14987),#14991);+#14987 = LINE('',#14988,#14989);+#14988 = CARTESIAN_POINT('',(9.026670170036E-02,0.));+#14989 = VECTOR('',#14990,1.);+#14990 = DIRECTION('',(0.,-1.));+#14991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14992 = ORIENTED_EDGE('',*,*,#14775,.T.);+#14993 = ORIENTED_EDGE('',*,*,#14945,.F.);+#14994 = ADVANCED_FACE('',(#14995),#2700,.T.);+#14995 = FACE_BOUND('',#14996,.T.);+#14996 = EDGE_LOOP('',(#14997,#14998,#15019,#15020));+#14997 = ORIENTED_EDGE('',*,*,#2684,.F.);+#14998 = ORIENTED_EDGE('',*,*,#14999,.T.);+#14999 = EDGE_CURVE('',#2658,#14730,#15000,.T.);+#15000 = SURFACE_CURVE('',#15001,(#15005,#15012),.PCURVE_S1.);+#15001 = LINE('',#15002,#15003);+#15002 = CARTESIAN_POINT('',(-0.3871403317,6.213265507733E-02,1.2500001)+ );+#15003 = VECTOR('',#15004,1.);+#15004 = DIRECTION('',(-0.,-0.,-1.));+#15005 = PCURVE('',#2700,#15006);+#15006 = DEFINITIONAL_REPRESENTATION('',(#15007),#15011);+#15007 = LINE('',#15008,#15009);+#15008 = CARTESIAN_POINT('',(0.,0.));+#15009 = VECTOR('',#15010,1.);+#15010 = DIRECTION('',(0.,-1.));+#15011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15012 = PCURVE('',#2673,#15013);+#15013 = DEFINITIONAL_REPRESENTATION('',(#15014),#15018);+#15014 = LINE('',#15015,#15016);+#15015 = CARTESIAN_POINT('',(1.347264204483E-02,0.));+#15016 = VECTOR('',#15017,1.);+#15017 = DIRECTION('',(0.,-1.));+#15018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15019 = ORIENTED_EDGE('',*,*,#14752,.T.);+#15020 = ORIENTED_EDGE('',*,*,#14972,.F.);+#15021 = ADVANCED_FACE('',(#15022),#2673,.T.);+#15022 = FACE_BOUND('',#15023,.T.);+#15023 = EDGE_LOOP('',(#15024,#15025,#15046,#15047));+#15024 = ORIENTED_EDGE('',*,*,#2657,.F.);+#15025 = ORIENTED_EDGE('',*,*,#15026,.T.);+#15026 = EDGE_CURVE('',#2631,#14728,#15027,.T.);+#15027 = SURFACE_CURVE('',#15028,(#15032,#15039),.PCURVE_S1.);+#15028 = LINE('',#15029,#15030);+#15029 = CARTESIAN_POINT('',(-0.3871403317,4.86600130325E-02,1.2500001)+ );+#15030 = VECTOR('',#15031,1.);+#15031 = DIRECTION('',(-0.,-0.,-1.));+#15032 = PCURVE('',#2673,#15033);+#15033 = DEFINITIONAL_REPRESENTATION('',(#15034),#15038);+#15034 = LINE('',#15035,#15036);+#15035 = CARTESIAN_POINT('',(0.,0.));+#15036 = VECTOR('',#15037,1.);+#15037 = DIRECTION('',(0.,-1.));+#15038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15039 = PCURVE('',#2646,#15040);+#15040 = DEFINITIONAL_REPRESENTATION('',(#15041),#15045);+#15041 = LINE('',#15042,#15043);+#15042 = CARTESIAN_POINT('',(3.716864187662E-02,0.));+#15043 = VECTOR('',#15044,1.);+#15044 = DIRECTION('',(0.,-1.));+#15045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15046 = ORIENTED_EDGE('',*,*,#14727,.T.);+#15047 = ORIENTED_EDGE('',*,*,#14999,.F.);+#15048 = ADVANCED_FACE('',(#15049),#2646,.T.);+#15049 = FACE_BOUND('',#15050,.T.);+#15050 = EDGE_LOOP('',(#15051,#15052,#15053,#15054));+#15051 = ORIENTED_EDGE('',*,*,#2628,.F.);+#15052 = ORIENTED_EDGE('',*,*,#14703,.T.);+#15053 = ORIENTED_EDGE('',*,*,#14866,.T.);+#15054 = ORIENTED_EDGE('',*,*,#15026,.F.);+#15055 = ADVANCED_FACE('',(#15056),#2359,.F.);+#15056 = FACE_BOUND('',#15057,.F.);+#15057 = EDGE_LOOP('',(#15058,#15059,#15079,#15080));+#15058 = ORIENTED_EDGE('',*,*,#2343,.T.);+#15059 = ORIENTED_EDGE('',*,*,#15060,.T.);+#15060 = EDGE_CURVE('',#2316,#2542,#15061,.T.);+#15061 = SURFACE_CURVE('',#15062,(#15065,#15072),.PCURVE_S1.);+#15062 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15063,#15064),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15063 = CARTESIAN_POINT('',(-0.6925,-1.425,0.725));+#15064 = CARTESIAN_POINT('',(-0.659121551758,-1.358243103516,1.2));+#15065 = PCURVE('',#2359,#15066);+#15066 = DEFINITIONAL_REPRESENTATION('',(#15067),#15071);+#15067 = LINE('',#15068,#15069);+#15068 = CARTESIAN_POINT('',(1.385,8.450462979314E-17));+#15069 = VECTOR('',#15070,1.);+#15070 = DIRECTION('',(0.,1.));+#15071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15072 = PCURVE('',#2331,#15073);+#15073 = DEFINITIONAL_REPRESENTATION('',(#15074),#15078);+#15074 = LINE('',#15075,#15076);+#15075 = CARTESIAN_POINT('',(-1.458783908728E-16,1.218467498047E-17));+#15076 = VECTOR('',#15077,1.);+#15077 = DIRECTION('',(-2.020075216142E-16,1.));+#15078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15079 = ORIENTED_EDGE('',*,*,#2563,.F.);+#15080 = ORIENTED_EDGE('',*,*,#2401,.F.);+#15081 = ADVANCED_FACE('',(#15082),#2331,.F.);+#15082 = FACE_BOUND('',#15083,.F.);+#15083 = EDGE_LOOP('',(#15084,#15085,#15105,#15106));+#15084 = ORIENTED_EDGE('',*,*,#2315,.T.);+#15085 = ORIENTED_EDGE('',*,*,#15086,.T.);+#15086 = EDGE_CURVE('',#2288,#2520,#15087,.T.);+#15087 = SURFACE_CURVE('',#15088,(#15091,#15098),.PCURVE_S1.);+#15088 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15089,#15090),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15089 = CARTESIAN_POINT('',(-0.775,-1.3425,0.725));+#15090 = CARTESIAN_POINT('',(-0.708243103516,-1.309121551758,1.2));+#15091 = PCURVE('',#2331,#15092);+#15092 = DEFINITIONAL_REPRESENTATION('',(#15093),#15097);+#15093 = LINE('',#15094,#15095);+#15094 = CARTESIAN_POINT('',(0.116672618896,1.220287212386E-17));+#15095 = VECTOR('',#15096,1.);+#15096 = DIRECTION('',(-2.775557561563E-17,1.));+#15097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15098 = PCURVE('',#2303,#15099);+#15099 = DEFINITIONAL_REPRESENTATION('',(#15100),#15104);+#15100 = LINE('',#15101,#15102);+#15101 = CARTESIAN_POINT('',(-7.587901680913E-17,-3.201840775164E-17));+#15102 = VECTOR('',#15103,1.);+#15103 = DIRECTION('',(2.794043366484E-16,1.));+#15104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15105 = ORIENTED_EDGE('',*,*,#2541,.F.);+#15106 = ORIENTED_EDGE('',*,*,#15060,.F.);+#15107 = ADVANCED_FACE('',(#15108),#2303,.F.);+#15108 = FACE_BOUND('',#15109,.F.);+#15109 = EDGE_LOOP('',(#15110,#15111,#15131,#15132));+#15110 = ORIENTED_EDGE('',*,*,#2287,.T.);+#15111 = ORIENTED_EDGE('',*,*,#15112,.T.);+#15112 = EDGE_CURVE('',#2260,#2498,#15113,.T.);+#15113 = SURFACE_CURVE('',#15114,(#15117,#15124),.PCURVE_S1.);+#15114 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15115,#15116),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15115 = CARTESIAN_POINT('',(-0.775,1.3425,0.725));+#15116 = CARTESIAN_POINT('',(-0.708243103516,1.309121551758,1.2));+#15117 = PCURVE('',#2303,#15118);+#15118 = DEFINITIONAL_REPRESENTATION('',(#15119),#15123);+#15119 = LINE('',#15120,#15121);+#15120 = CARTESIAN_POINT('',(2.685,2.654163288001E-16));+#15121 = VECTOR('',#15122,1.);+#15122 = DIRECTION('',(0.,1.));+#15123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15124 = PCURVE('',#2275,#15125);+#15125 = DEFINITIONAL_REPRESENTATION('',(#15126),#15130);+#15126 = LINE('',#15127,#15128);+#15127 = CARTESIAN_POINT('',(1.670315671762E-16,6.04274082121E-17));+#15128 = VECTOR('',#15129,1.);+#15129 = DIRECTION('',(1.452832823571E-16,1.));+#15130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15131 = ORIENTED_EDGE('',*,*,#2519,.F.);+#15132 = ORIENTED_EDGE('',*,*,#15086,.F.);+#15133 = ADVANCED_FACE('',(#15134),#2275,.F.);+#15134 = FACE_BOUND('',#15135,.F.);+#15135 = EDGE_LOOP('',(#15136,#15137,#15157,#15158));+#15136 = ORIENTED_EDGE('',*,*,#2259,.T.);+#15137 = ORIENTED_EDGE('',*,*,#15138,.T.);+#15138 = EDGE_CURVE('',#2232,#2474,#15139,.T.);+#15139 = SURFACE_CURVE('',#15140,(#15143,#15150),.PCURVE_S1.);+#15140 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15141,#15142),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15141 = CARTESIAN_POINT('',(-0.6925,1.425,0.725));+#15142 = CARTESIAN_POINT('',(-0.659121551758,1.358243103516,1.2));+#15143 = PCURVE('',#2275,#15144);+#15144 = DEFINITIONAL_REPRESENTATION('',(#15145),#15149);+#15145 = LINE('',#15146,#15147);+#15146 = CARTESIAN_POINT('',(0.116672618896,1.219358296304E-17));+#15147 = VECTOR('',#15148,1.);+#15148 = DIRECTION('',(6.938893903907E-17,1.));+#15149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15150 = PCURVE('',#2247,#15151);+#15151 = DEFINITIONAL_REPRESENTATION('',(#15152),#15156);+#15152 = LINE('',#15153,#15154);+#15153 = CARTESIAN_POINT('',(1.423222469141E-16,-1.577784235436E-17));+#15154 = VECTOR('',#15155,1.);+#15155 = DIRECTION('',(2.598611130672E-17,1.));+#15156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15157 = ORIENTED_EDGE('',*,*,#2497,.F.);+#15158 = ORIENTED_EDGE('',*,*,#15112,.F.);+#15159 = ADVANCED_FACE('',(#15160),#2247,.F.);+#15160 = FACE_BOUND('',#15161,.F.);+#15161 = EDGE_LOOP('',(#15162,#15163,#15183,#15184));+#15162 = ORIENTED_EDGE('',*,*,#2231,.T.);+#15163 = ORIENTED_EDGE('',*,*,#15164,.T.);+#15164 = EDGE_CURVE('',#2204,#2476,#15165,.T.);+#15165 = SURFACE_CURVE('',#15166,(#15169,#15176),.PCURVE_S1.);+#15166 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15167,#15168),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15167 = CARTESIAN_POINT('',(0.6925,1.425,0.725));+#15168 = CARTESIAN_POINT('',(0.659121551758,1.358243103516,1.2));+#15169 = PCURVE('',#2247,#15170);+#15170 = DEFINITIONAL_REPRESENTATION('',(#15171),#15175);+#15171 = LINE('',#15172,#15173);+#15172 = CARTESIAN_POINT('',(1.385,8.450462979314E-17));+#15173 = VECTOR('',#15174,1.);+#15174 = DIRECTION('',(0.,1.));+#15175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15176 = PCURVE('',#2219,#15177);+#15177 = DEFINITIONAL_REPRESENTATION('',(#15178),#15182);+#15178 = LINE('',#15179,#15180);+#15179 = CARTESIAN_POINT('',(-1.458783908728E-16,1.218467498047E-17));+#15180 = VECTOR('',#15181,1.);+#15181 = DIRECTION('',(-2.020075216142E-16,1.));+#15182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15183 = ORIENTED_EDGE('',*,*,#2473,.F.);+#15184 = ORIENTED_EDGE('',*,*,#15138,.F.);+#15185 = ADVANCED_FACE('',(#15186),#2219,.F.);+#15186 = FACE_BOUND('',#15187,.F.);+#15187 = EDGE_LOOP('',(#15188,#15189,#15209,#15210));+#15188 = ORIENTED_EDGE('',*,*,#2203,.T.);+#15189 = ORIENTED_EDGE('',*,*,#15190,.T.);+#15190 = EDGE_CURVE('',#2174,#2585,#15191,.T.);+#15191 = SURFACE_CURVE('',#15192,(#15195,#15202),.PCURVE_S1.);+#15192 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15193,#15194),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15193 = CARTESIAN_POINT('',(0.775,1.3425,0.725));+#15194 = CARTESIAN_POINT('',(0.708243103516,1.309121551758,1.2));+#15195 = PCURVE('',#2219,#15196);+#15196 = DEFINITIONAL_REPRESENTATION('',(#15197),#15201);+#15197 = LINE('',#15198,#15199);+#15198 = CARTESIAN_POINT('',(0.116672618896,1.220287212386E-17));+#15199 = VECTOR('',#15200,1.);+#15200 = DIRECTION('',(-2.775557561563E-17,1.));+#15201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15202 = PCURVE('',#2191,#15203);+#15203 = DEFINITIONAL_REPRESENTATION('',(#15204),#15208);+#15204 = LINE('',#15205,#15206);+#15205 = CARTESIAN_POINT('',(-7.587901680913E-17,-3.201840775164E-17));+#15206 = VECTOR('',#15207,1.);+#15207 = DIRECTION('',(2.794043366484E-16,1.));+#15208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15209 = ORIENTED_EDGE('',*,*,#2606,.F.);+#15210 = ORIENTED_EDGE('',*,*,#15164,.F.);+#15211 = ADVANCED_FACE('',(#15212),#2191,.F.);+#15212 = FACE_BOUND('',#15213,.F.);+#15213 = EDGE_LOOP('',(#15214,#15215,#15216,#15217));+#15214 = ORIENTED_EDGE('',*,*,#2173,.T.);+#15215 = ORIENTED_EDGE('',*,*,#2450,.T.);+#15216 = ORIENTED_EDGE('',*,*,#2584,.F.);+#15217 = ORIENTED_EDGE('',*,*,#15190,.F.);+#15218 = ADVANCED_FACE('',(#15219),#2138,.T.);+#15219 = FACE_BOUND('',#15220,.T.);+#15220 = EDGE_LOOP('',(#15221,#15242,#15265,#15298,#15326,#15355,#15383,+ #15411,#15439,#15472,#15500,#15522));+#15221 = ORIENTED_EDGE('',*,*,#15222,.F.);+#15222 = EDGE_CURVE('',#263,#2123,#15223,.T.);+#15223 = SURFACE_CURVE('',#15224,(#15228,#15235),.PCURVE_S1.);+#15224 = LINE('',#15225,#15226);+#15225 = CARTESIAN_POINT('',(-0.8,1.165,0.536425222974));+#15226 = VECTOR('',#15227,1.);+#15227 = DIRECTION('',(0.,0.,1.));+#15228 = PCURVE('',#2138,#15229);+#15229 = DEFINITIONAL_REPRESENTATION('',(#15230),#15234);+#15230 = LINE('',#15231,#15232);+#15231 = CARTESIAN_POINT('',(0.188574777026,0.265218773576));+#15232 = VECTOR('',#15233,1.);+#15233 = DIRECTION('',(1.,0.));+#15234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15235 = PCURVE('',#278,#15236);+#15236 = DEFINITIONAL_REPRESENTATION('',(#15237),#15241);+#15237 = LINE('',#15238,#15239);+#15238 = CARTESIAN_POINT('',(2.52,-0.188574777026));+#15239 = VECTOR('',#15240,1.);+#15240 = DIRECTION('',(0.,1.));+#15241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15242 = ORIENTED_EDGE('',*,*,#15243,.T.);+#15243 = EDGE_CURVE('',#263,#15244,#15246,.T.);+#15244 = VERTEX_POINT('',#15245);+#15245 = CARTESIAN_POINT('',(-0.85,1.165,0.575));+#15246 = SURFACE_CURVE('',#15247,(#15251,#15258),.PCURVE_S1.);+#15247 = LINE('',#15248,#15249);+#15248 = CARTESIAN_POINT('',(-0.75,1.165,0.575));+#15249 = VECTOR('',#15250,1.);+#15250 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15251 = PCURVE('',#2138,#15252);+#15252 = DEFINITIONAL_REPRESENTATION('',(#15253),#15257);+#15253 = LINE('',#15254,#15255);+#15254 = CARTESIAN_POINT('',(0.227149554052,0.315218773576));+#15255 = VECTOR('',#15256,1.);+#15256 = DIRECTION('',(0.,-1.));+#15257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15258 = PCURVE('',#306,#15259);+#15259 = DEFINITIONAL_REPRESENTATION('',(#15260),#15264);+#15260 = LINE('',#15261,#15262);+#15261 = CARTESIAN_POINT('',(4.348103431844E-18,-0.38));+#15262 = VECTOR('',#15263,1.);+#15263 = DIRECTION('',(1.,0.));+#15264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15265 = ORIENTED_EDGE('',*,*,#15266,.T.);+#15266 = EDGE_CURVE('',#15244,#15267,#15269,.T.);+#15267 = VERTEX_POINT('',#15268);+#15268 = CARTESIAN_POINT('',(-0.948480775301,1.165,0.492364817767));+#15269 = SURFACE_CURVE('',#15270,(#15275,#15286),.PCURVE_S1.);+#15270 = CIRCLE('',#15271,0.1);+#15271 = AXIS2_PLACEMENT_3D('',#15272,#15273,#15274);+#15272 = CARTESIAN_POINT('',(-0.85,1.165,0.475));+#15273 = DIRECTION('',(-1.144237745222E-17,-1.,5.473822126269E-48));+#15274 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#15275 = PCURVE('',#2138,#15276);+#15276 = DEFINITIONAL_REPRESENTATION('',(#15277),#15285);+#15277 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15278,#15279,#15280,#15281+ ,#15282,#15283,#15284),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15278 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#15279 = CARTESIAN_POINT('',(0.227149554052,4.201369281911E-02));+#15280 = CARTESIAN_POINT('',(7.7149554052E-02,0.128616233198));+#15281 = CARTESIAN_POINT('',(-7.2850445948E-02,0.215218773576));+#15282 = CARTESIAN_POINT('',(7.7149554052E-02,0.301821313954));+#15283 = CARTESIAN_POINT('',(0.227149554052,0.388423854333));+#15284 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#15285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15286 = PCURVE('',#15287,#15292);+#15287 = CYLINDRICAL_SURFACE('',#15288,0.1);+#15288 = AXIS2_PLACEMENT_3D('',#15289,#15290,#15291);+#15289 = CARTESIAN_POINT('',(-0.85,0.785,0.475));+#15290 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#15291 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#15292 = DEFINITIONAL_REPRESENTATION('',(#15293),#15297);+#15293 = LINE('',#15294,#15295);+#15294 = CARTESIAN_POINT('',(0.,-0.38));+#15295 = VECTOR('',#15296,1.);+#15296 = DIRECTION('',(1.,0.));+#15297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15298 = ORIENTED_EDGE('',*,*,#15299,.T.);+#15299 = EDGE_CURVE('',#15267,#15300,#15302,.T.);+#15300 = VERTEX_POINT('',#15301);+#15301 = CARTESIAN_POINT('',(-0.993471632406,1.165,0.206587955583));+#15302 = SURFACE_CURVE('',#15303,(#15307,#15314),.PCURVE_S1.);+#15303 = LINE('',#15304,#15305);+#15304 = CARTESIAN_POINT('',(-0.948480775301,1.165,0.492364817767));+#15305 = VECTOR('',#15306,1.);+#15306 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#15307 = PCURVE('',#2138,#15308);+#15308 = DEFINITIONAL_REPRESENTATION('',(#15309),#15313);+#15309 = LINE('',#15310,#15311);+#15310 = CARTESIAN_POINT('',(0.144514371819,0.116737998275));+#15311 = VECTOR('',#15312,1.);+#15312 = DIRECTION('',(-0.987833053268,-0.155518033909));+#15313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15314 = PCURVE('',#15315,#15320);+#15315 = PLANE('',#15316);+#15316 = AXIS2_PLACEMENT_3D('',#15317,#15318,#15319);+#15317 = CARTESIAN_POINT('',(-0.948480775301,0.785,0.492364817767));+#15318 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909+ ));+#15319 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#15320 = DEFINITIONAL_REPRESENTATION('',(#15321),#15325);+#15321 = LINE('',#15322,#15323);+#15322 = CARTESIAN_POINT('',(6.762084969515E-19,-0.38));+#15323 = VECTOR('',#15324,1.);+#15324 = DIRECTION('',(1.,-6.052038146458E-35));+#15325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15326 = ORIENTED_EDGE('',*,*,#15327,.T.);+#15327 = EDGE_CURVE('',#15300,#15328,#15330,.T.);+#15328 = VERTEX_POINT('',#15329);+#15329 = CARTESIAN_POINT('',(-1.239673570659,1.165,-5.551115123126E-17)+ );+#15330 = SURFACE_CURVE('',#15331,(#15336,#15343),.PCURVE_S1.);+#15331 = CIRCLE('',#15332,0.25);+#15332 = AXIS2_PLACEMENT_3D('',#15333,#15334,#15335);+#15333 = CARTESIAN_POINT('',(-1.239673570659,1.165,0.25));+#15334 = DIRECTION('',(1.144237745222E-17,1.,-3.851859888774E-34));+#15335 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#15336 = PCURVE('',#2138,#15337);+#15337 = DEFINITIONAL_REPRESENTATION('',(#15338),#15342);+#15338 = CIRCLE('',#15339,0.25);+#15339 = AXIS2_PLACEMENT_2D('',#15340,#15341);+#15340 = CARTESIAN_POINT('',(-9.7850445948E-02,-0.174454797083));+#15341 = DIRECTION('',(-0.173648177667,0.984807753012));+#15342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15343 = PCURVE('',#15344,#15349);+#15344 = CYLINDRICAL_SURFACE('',#15345,0.25);+#15345 = AXIS2_PLACEMENT_3D('',#15346,#15347,#15348);+#15346 = CARTESIAN_POINT('',(-1.239673570659,0.785,0.25));+#15347 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#15348 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#15349 = DEFINITIONAL_REPRESENTATION('',(#15350),#15354);+#15350 = LINE('',#15351,#15352);+#15351 = CARTESIAN_POINT('',(6.28318530718,-0.38));+#15352 = VECTOR('',#15353,1.);+#15353 = DIRECTION('',(-1.,0.));+#15354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15355 = ORIENTED_EDGE('',*,*,#15356,.T.);+#15356 = EDGE_CURVE('',#15328,#15357,#15359,.T.);+#15357 = VERTEX_POINT('',#15358);+#15358 = CARTESIAN_POINT('',(-1.4,1.165,-5.551115123126E-17));+#15359 = SURFACE_CURVE('',#15360,(#15364,#15371),.PCURVE_S1.);+#15360 = LINE('',#15361,#15362);+#15361 = CARTESIAN_POINT('',(-1.239673570659,1.165,-5.551115123126E-17)+ );+#15362 = VECTOR('',#15363,1.);+#15363 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15364 = PCURVE('',#2138,#15365);+#15365 = DEFINITIONAL_REPRESENTATION('',(#15366),#15370);+#15366 = LINE('',#15367,#15368);+#15367 = CARTESIAN_POINT('',(-0.347850445948,-0.174454797083));+#15368 = VECTOR('',#15369,1.);+#15369 = DIRECTION('',(0.,-1.));+#15370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15371 = PCURVE('',#15372,#15377);+#15372 = PLANE('',#15373);+#15373 = AXIS2_PLACEMENT_3D('',#15374,#15375,#15376);+#15374 = CARTESIAN_POINT('',(-1.239673570659,0.785,-5.551115123126E-17)+ );+#15375 = DIRECTION('',(0.,0.,1.));+#15376 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15377 = DEFINITIONAL_REPRESENTATION('',(#15378),#15382);+#15378 = LINE('',#15379,#15380);+#15379 = CARTESIAN_POINT('',(4.348103431844E-18,-0.38));+#15380 = VECTOR('',#15381,1.);+#15381 = DIRECTION('',(1.,0.));+#15382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15383 = ORIENTED_EDGE('',*,*,#15384,.T.);+#15384 = EDGE_CURVE('',#15357,#15385,#15387,.T.);+#15385 = VERTEX_POINT('',#15386);+#15386 = CARTESIAN_POINT('',(-1.4,1.165,0.15));+#15387 = SURFACE_CURVE('',#15388,(#15392,#15399),.PCURVE_S1.);+#15388 = LINE('',#15389,#15390);+#15389 = CARTESIAN_POINT('',(-1.4,1.165,-5.551115123126E-17));+#15390 = VECTOR('',#15391,1.);+#15391 = DIRECTION('',(0.,0.,1.));+#15392 = PCURVE('',#2138,#15393);+#15393 = DEFINITIONAL_REPRESENTATION('',(#15394),#15398);+#15394 = LINE('',#15395,#15396);+#15395 = CARTESIAN_POINT('',(-0.347850445948,-0.334781226424));+#15396 = VECTOR('',#15397,1.);+#15397 = DIRECTION('',(1.,0.));+#15398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15399 = PCURVE('',#15400,#15405);+#15400 = PLANE('',#15401);+#15401 = AXIS2_PLACEMENT_3D('',#15402,#15403,#15404);+#15402 = CARTESIAN_POINT('',(-1.4,0.785,-5.551115123126E-17));+#15403 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15404 = DIRECTION('',(0.,0.,1.));+#15405 = DEFINITIONAL_REPRESENTATION('',(#15406),#15410);+#15406 = LINE('',#15407,#15408);+#15407 = CARTESIAN_POINT('',(0.,-0.38));+#15408 = VECTOR('',#15409,1.);+#15409 = DIRECTION('',(1.,0.));+#15410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15411 = ORIENTED_EDGE('',*,*,#15412,.T.);+#15412 = EDGE_CURVE('',#15385,#15413,#15415,.T.);+#15413 = VERTEX_POINT('',#15414);+#15414 = CARTESIAN_POINT('',(-1.239673570659,1.165,0.15));+#15415 = SURFACE_CURVE('',#15416,(#15420,#15427),.PCURVE_S1.);+#15416 = LINE('',#15417,#15418);+#15417 = CARTESIAN_POINT('',(-1.4,1.165,0.15));+#15418 = VECTOR('',#15419,1.);+#15419 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15420 = PCURVE('',#2138,#15421);+#15421 = DEFINITIONAL_REPRESENTATION('',(#15422),#15426);+#15422 = LINE('',#15423,#15424);+#15423 = CARTESIAN_POINT('',(-0.197850445948,-0.334781226424));+#15424 = VECTOR('',#15425,1.);+#15425 = DIRECTION('',(0.,1.));+#15426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15427 = PCURVE('',#15428,#15433);+#15428 = PLANE('',#15429);+#15429 = AXIS2_PLACEMENT_3D('',#15430,#15431,#15432);+#15430 = CARTESIAN_POINT('',(-1.4,0.785,0.15));+#15431 = DIRECTION('',(0.,0.,-1.));+#15432 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15433 = DEFINITIONAL_REPRESENTATION('',(#15434),#15438);+#15434 = LINE('',#15435,#15436);+#15435 = CARTESIAN_POINT('',(-4.348103431844E-18,-0.38));+#15436 = VECTOR('',#15437,1.);+#15437 = DIRECTION('',(1.,0.));+#15438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15439 = ORIENTED_EDGE('',*,*,#15440,.T.);+#15440 = EDGE_CURVE('',#15413,#15441,#15443,.T.);+#15441 = VERTEX_POINT('',#15442);+#15442 = CARTESIAN_POINT('',(-1.141192795358,1.165,0.232635182233));+#15443 = SURFACE_CURVE('',#15444,(#15449,#15460),.PCURVE_S1.);+#15444 = CIRCLE('',#15445,0.1);+#15445 = AXIS2_PLACEMENT_3D('',#15446,#15447,#15448);+#15446 = CARTESIAN_POINT('',(-1.239673570659,1.165,0.25));+#15447 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#15448 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#15449 = PCURVE('',#2138,#15450);+#15450 = DEFINITIONAL_REPRESENTATION('',(#15451),#15459);+#15451 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15452,#15453,#15454,#15455+ ,#15456,#15457,#15458),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15452 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#15453 = CARTESIAN_POINT('',(-0.197850445948,-1.249716326112E-03));+#15454 = CARTESIAN_POINT('',(-4.7850445948E-02,-8.785225670456E-02));+#15455 = CARTESIAN_POINT('',(0.102149554052,-0.174454797083));+#15456 = CARTESIAN_POINT('',(-4.7850445948E-02,-0.261057337461));+#15457 = CARTESIAN_POINT('',(-0.197850445948,-0.34765987784));+#15458 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#15459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15460 = PCURVE('',#15461,#15466);+#15461 = CYLINDRICAL_SURFACE('',#15462,0.1);+#15462 = AXIS2_PLACEMENT_3D('',#15463,#15464,#15465);+#15463 = CARTESIAN_POINT('',(-1.239673570659,0.785,0.25));+#15464 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#15465 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#15466 = DEFINITIONAL_REPRESENTATION('',(#15467),#15471);+#15467 = LINE('',#15468,#15469);+#15468 = CARTESIAN_POINT('',(0.,-0.38));+#15469 = VECTOR('',#15470,1.);+#15470 = DIRECTION('',(1.,0.));+#15471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15472 = ORIENTED_EDGE('',*,*,#15473,.T.);+#15473 = EDGE_CURVE('',#15441,#15474,#15476,.T.);+#15474 = VERTEX_POINT('',#15475);+#15475 = CARTESIAN_POINT('',(-1.096201938253,1.165,0.518412044417));+#15476 = SURFACE_CURVE('',#15477,(#15481,#15488),.PCURVE_S1.);+#15477 = LINE('',#15478,#15479);+#15478 = CARTESIAN_POINT('',(-1.141192795358,1.165,0.232635182233));+#15479 = VECTOR('',#15480,1.);+#15480 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#15481 = PCURVE('',#2138,#15482);+#15482 = DEFINITIONAL_REPRESENTATION('',(#15483),#15487);+#15483 = LINE('',#15484,#15485);+#15484 = CARTESIAN_POINT('',(-0.115215263715,-7.5974021782E-02));+#15485 = VECTOR('',#15486,1.);+#15486 = DIRECTION('',(0.987833053268,0.155518033909));+#15487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15488 = PCURVE('',#15489,#15494);+#15489 = PLANE('',#15490);+#15490 = AXIS2_PLACEMENT_3D('',#15491,#15492,#15493);+#15491 = CARTESIAN_POINT('',(-1.141192795358,0.785,0.232635182233));+#15492 = DIRECTION('',(0.987833053268,-1.130315865527E-17,+ -0.155518033909));+#15493 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#15494 = DEFINITIONAL_REPRESENTATION('',(#15495),#15499);+#15495 = LINE('',#15496,#15497);+#15496 = CARTESIAN_POINT('',(-6.762084969515E-19,-0.38));+#15497 = VECTOR('',#15498,1.);+#15498 = DIRECTION('',(1.,6.052038146458E-35));+#15499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15500 = ORIENTED_EDGE('',*,*,#15501,.T.);+#15501 = EDGE_CURVE('',#15474,#2095,#15502,.T.);+#15502 = SURFACE_CURVE('',#15503,(#15508,#15515),.PCURVE_S1.);+#15503 = CIRCLE('',#15504,0.25);+#15504 = AXIS2_PLACEMENT_3D('',#15505,#15506,#15507);+#15505 = CARTESIAN_POINT('',(-0.85,1.165,0.475));+#15506 = DIRECTION('',(1.144237745222E-17,1.,1.54074395551E-33));+#15507 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#15508 = PCURVE('',#2138,#15509);+#15509 = DEFINITIONAL_REPRESENTATION('',(#15510),#15514);+#15510 = CIRCLE('',#15511,0.25);+#15511 = AXIS2_PLACEMENT_2D('',#15512,#15513);+#15512 = CARTESIAN_POINT('',(0.127149554052,0.215218773576));+#15513 = DIRECTION('',(0.173648177667,-0.984807753012));+#15514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15515 = PCURVE('',#2110,#15516);+#15516 = DEFINITIONAL_REPRESENTATION('',(#15517),#15521);+#15517 = LINE('',#15518,#15519);+#15518 = CARTESIAN_POINT('',(6.28318530718,-0.38));+#15519 = VECTOR('',#15520,1.);+#15520 = DIRECTION('',(-1.,0.));+#15521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15522 = ORIENTED_EDGE('',*,*,#2122,.T.);+#15523 = ADVANCED_FACE('',(#15524),#15489,.F.);+#15524 = FACE_BOUND('',#15525,.F.);+#15525 = EDGE_LOOP('',(#15526,#15549,#15550,#15573));+#15526 = ORIENTED_EDGE('',*,*,#15527,.T.);+#15527 = EDGE_CURVE('',#15528,#15441,#15530,.T.);+#15528 = VERTEX_POINT('',#15529);+#15529 = CARTESIAN_POINT('',(-1.141192795358,0.785,0.232635182233));+#15530 = SURFACE_CURVE('',#15531,(#15535,#15542),.PCURVE_S1.);+#15531 = LINE('',#15532,#15533);+#15532 = CARTESIAN_POINT('',(-1.141192795358,0.785,0.232635182233));+#15533 = VECTOR('',#15534,1.);+#15534 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15535 = PCURVE('',#15489,#15536);+#15536 = DEFINITIONAL_REPRESENTATION('',(#15537),#15541);+#15537 = LINE('',#15538,#15539);+#15538 = CARTESIAN_POINT('',(0.,0.));+#15539 = VECTOR('',#15540,1.);+#15540 = DIRECTION('',(4.926605106769E-30,-1.));+#15541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15542 = PCURVE('',#15461,#15543);+#15543 = DEFINITIONAL_REPRESENTATION('',(#15544),#15548);+#15544 = LINE('',#15545,#15546);+#15545 = CARTESIAN_POINT('',(1.396263401592,0.));+#15546 = VECTOR('',#15547,1.);+#15547 = DIRECTION('',(0.,-1.));+#15548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15549 = ORIENTED_EDGE('',*,*,#15473,.T.);+#15550 = ORIENTED_EDGE('',*,*,#15551,.F.);+#15551 = EDGE_CURVE('',#15552,#15474,#15554,.T.);+#15552 = VERTEX_POINT('',#15553);+#15553 = CARTESIAN_POINT('',(-1.096201938253,0.785,0.518412044417));+#15554 = SURFACE_CURVE('',#15555,(#15559,#15566),.PCURVE_S1.);+#15555 = LINE('',#15556,#15557);+#15556 = CARTESIAN_POINT('',(-1.096201938253,0.785,0.518412044417));+#15557 = VECTOR('',#15558,1.);+#15558 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15559 = PCURVE('',#15489,#15560);+#15560 = DEFINITIONAL_REPRESENTATION('',(#15561),#15565);+#15561 = LINE('',#15562,#15563);+#15562 = CARTESIAN_POINT('',(0.289296719965,-5.14802368897E-19));+#15563 = VECTOR('',#15564,1.);+#15564 = DIRECTION('',(4.926605106769E-30,-1.));+#15565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15566 = PCURVE('',#2110,#15567);+#15567 = DEFINITIONAL_REPRESENTATION('',(#15568),#15572);+#15568 = LINE('',#15569,#15570);+#15569 = CARTESIAN_POINT('',(6.28318530718,0.));+#15570 = VECTOR('',#15571,1.);+#15571 = DIRECTION('',(0.,-1.));+#15572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15573 = ORIENTED_EDGE('',*,*,#15574,.F.);+#15574 = EDGE_CURVE('',#15528,#15552,#15575,.T.);+#15575 = SURFACE_CURVE('',#15576,(#15580,#15587),.PCURVE_S1.);+#15576 = LINE('',#15577,#15578);+#15577 = CARTESIAN_POINT('',(-1.141192795358,0.785,0.232635182233));+#15578 = VECTOR('',#15579,1.);+#15579 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#15580 = PCURVE('',#15489,#15581);+#15581 = DEFINITIONAL_REPRESENTATION('',(#15582),#15586);+#15582 = LINE('',#15583,#15584);+#15583 = CARTESIAN_POINT('',(0.,0.));+#15584 = VECTOR('',#15585,1.);+#15585 = DIRECTION('',(1.,6.052038146458E-35));+#15586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15587 = PCURVE('',#2082,#15588);+#15588 = DEFINITIONAL_REPRESENTATION('',(#15589),#15593);+#15589 = LINE('',#15590,#15591);+#15590 = CARTESIAN_POINT('',(-0.115215263715,-7.5974021782E-02));+#15591 = VECTOR('',#15592,1.);+#15592 = DIRECTION('',(0.987833053268,0.155518033909));+#15593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15594 = ADVANCED_FACE('',(#15595),#15461,.F.);+#15595 = FACE_BOUND('',#15596,.F.);+#15596 = EDGE_LOOP('',(#15597,#15620,#15621,#15622));+#15597 = ORIENTED_EDGE('',*,*,#15598,.T.);+#15598 = EDGE_CURVE('',#15599,#15413,#15601,.T.);+#15599 = VERTEX_POINT('',#15600);+#15600 = CARTESIAN_POINT('',(-1.239673570659,0.785,0.15));+#15601 = SURFACE_CURVE('',#15602,(#15606,#15613),.PCURVE_S1.);+#15602 = LINE('',#15603,#15604);+#15603 = CARTESIAN_POINT('',(-1.239673570659,0.785,0.15));+#15604 = VECTOR('',#15605,1.);+#15605 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15606 = PCURVE('',#15461,#15607);+#15607 = DEFINITIONAL_REPRESENTATION('',(#15608),#15612);+#15608 = LINE('',#15609,#15610);+#15609 = CARTESIAN_POINT('',(0.,0.));+#15610 = VECTOR('',#15611,1.);+#15611 = DIRECTION('',(0.,-1.));+#15612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15613 = PCURVE('',#15428,#15614);+#15614 = DEFINITIONAL_REPRESENTATION('',(#15615),#15619);+#15615 = LINE('',#15616,#15617);+#15616 = CARTESIAN_POINT('',(0.160326429341,-1.834515520086E-18));+#15617 = VECTOR('',#15618,1.);+#15618 = DIRECTION('',(0.,-1.));+#15619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15620 = ORIENTED_EDGE('',*,*,#15440,.T.);+#15621 = ORIENTED_EDGE('',*,*,#15527,.F.);+#15622 = ORIENTED_EDGE('',*,*,#15623,.F.);+#15623 = EDGE_CURVE('',#15599,#15528,#15624,.T.);+#15624 = SURFACE_CURVE('',#15625,(#15630,#15637),.PCURVE_S1.);+#15625 = CIRCLE('',#15626,0.1);+#15626 = AXIS2_PLACEMENT_3D('',#15627,#15628,#15629);+#15627 = CARTESIAN_POINT('',(-1.239673570659,0.785,0.25));+#15628 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#15629 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#15630 = PCURVE('',#15461,#15631);+#15631 = DEFINITIONAL_REPRESENTATION('',(#15632),#15636);+#15632 = LINE('',#15633,#15634);+#15633 = CARTESIAN_POINT('',(0.,0.));+#15634 = VECTOR('',#15635,1.);+#15635 = DIRECTION('',(1.,0.));+#15636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15637 = PCURVE('',#2082,#15638);+#15638 = DEFINITIONAL_REPRESENTATION('',(#15639),#15647);+#15639 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15640,#15641,#15642,#15643+ ,#15644,#15645,#15646),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15640 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#15641 = CARTESIAN_POINT('',(-0.197850445948,-1.249716326112E-03));+#15642 = CARTESIAN_POINT('',(-4.7850445948E-02,-8.785225670456E-02));+#15643 = CARTESIAN_POINT('',(0.102149554052,-0.174454797083));+#15644 = CARTESIAN_POINT('',(-4.7850445948E-02,-0.261057337461));+#15645 = CARTESIAN_POINT('',(-0.197850445948,-0.34765987784));+#15646 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#15647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15648 = ADVANCED_FACE('',(#15649),#15428,.F.);+#15649 = FACE_BOUND('',#15650,.F.);+#15650 = EDGE_LOOP('',(#15651,#15674,#15675,#15676));+#15651 = ORIENTED_EDGE('',*,*,#15652,.T.);+#15652 = EDGE_CURVE('',#15653,#15385,#15655,.T.);+#15653 = VERTEX_POINT('',#15654);+#15654 = CARTESIAN_POINT('',(-1.4,0.785,0.15));+#15655 = SURFACE_CURVE('',#15656,(#15660,#15667),.PCURVE_S1.);+#15656 = LINE('',#15657,#15658);+#15657 = CARTESIAN_POINT('',(-1.4,0.785,0.15));+#15658 = VECTOR('',#15659,1.);+#15659 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15660 = PCURVE('',#15428,#15661);+#15661 = DEFINITIONAL_REPRESENTATION('',(#15662),#15666);+#15662 = LINE('',#15663,#15664);+#15663 = CARTESIAN_POINT('',(0.,-0.));+#15664 = VECTOR('',#15665,1.);+#15665 = DIRECTION('',(0.,-1.));+#15666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15667 = PCURVE('',#15400,#15668);+#15668 = DEFINITIONAL_REPRESENTATION('',(#15669),#15673);+#15669 = LINE('',#15670,#15671);+#15670 = CARTESIAN_POINT('',(0.15,0.));+#15671 = VECTOR('',#15672,1.);+#15672 = DIRECTION('',(0.,-1.));+#15673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15674 = ORIENTED_EDGE('',*,*,#15412,.T.);+#15675 = ORIENTED_EDGE('',*,*,#15598,.F.);+#15676 = ORIENTED_EDGE('',*,*,#15677,.F.);+#15677 = EDGE_CURVE('',#15653,#15599,#15678,.T.);+#15678 = SURFACE_CURVE('',#15679,(#15683,#15690),.PCURVE_S1.);+#15679 = LINE('',#15680,#15681);+#15680 = CARTESIAN_POINT('',(-1.4,0.785,0.15));+#15681 = VECTOR('',#15682,1.);+#15682 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15683 = PCURVE('',#15428,#15684);+#15684 = DEFINITIONAL_REPRESENTATION('',(#15685),#15689);+#15685 = LINE('',#15686,#15687);+#15686 = CARTESIAN_POINT('',(0.,-0.));+#15687 = VECTOR('',#15688,1.);+#15688 = DIRECTION('',(1.,0.));+#15689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15690 = PCURVE('',#2082,#15691);+#15691 = DEFINITIONAL_REPRESENTATION('',(#15692),#15696);+#15692 = LINE('',#15693,#15694);+#15693 = CARTESIAN_POINT('',(-0.197850445948,-0.334781226424));+#15694 = VECTOR('',#15695,1.);+#15695 = DIRECTION('',(0.,1.));+#15696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15697 = ADVANCED_FACE('',(#15698),#15400,.F.);+#15698 = FACE_BOUND('',#15699,.F.);+#15699 = EDGE_LOOP('',(#15700,#15723,#15724,#15725));+#15700 = ORIENTED_EDGE('',*,*,#15701,.T.);+#15701 = EDGE_CURVE('',#15702,#15357,#15704,.T.);+#15702 = VERTEX_POINT('',#15703);+#15703 = CARTESIAN_POINT('',(-1.4,0.785,-5.551115123126E-17));+#15704 = SURFACE_CURVE('',#15705,(#15709,#15716),.PCURVE_S1.);+#15705 = LINE('',#15706,#15707);+#15706 = CARTESIAN_POINT('',(-1.4,0.785,-5.551115123126E-17));+#15707 = VECTOR('',#15708,1.);+#15708 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15709 = PCURVE('',#15400,#15710);+#15710 = DEFINITIONAL_REPRESENTATION('',(#15711),#15715);+#15711 = LINE('',#15712,#15713);+#15712 = CARTESIAN_POINT('',(0.,0.));+#15713 = VECTOR('',#15714,1.);+#15714 = DIRECTION('',(0.,-1.));+#15715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15716 = PCURVE('',#15372,#15717);+#15717 = DEFINITIONAL_REPRESENTATION('',(#15718),#15722);+#15718 = LINE('',#15719,#15720);+#15719 = CARTESIAN_POINT('',(0.160326429341,1.834515520086E-18));+#15720 = VECTOR('',#15721,1.);+#15721 = DIRECTION('',(0.,-1.));+#15722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15723 = ORIENTED_EDGE('',*,*,#15384,.T.);+#15724 = ORIENTED_EDGE('',*,*,#15652,.F.);+#15725 = ORIENTED_EDGE('',*,*,#15726,.F.);+#15726 = EDGE_CURVE('',#15702,#15653,#15727,.T.);+#15727 = SURFACE_CURVE('',#15728,(#15732,#15739),.PCURVE_S1.);+#15728 = LINE('',#15729,#15730);+#15729 = CARTESIAN_POINT('',(-1.4,0.785,-5.551115123126E-17));+#15730 = VECTOR('',#15731,1.);+#15731 = DIRECTION('',(0.,0.,1.));+#15732 = PCURVE('',#15400,#15733);+#15733 = DEFINITIONAL_REPRESENTATION('',(#15734),#15738);+#15734 = LINE('',#15735,#15736);+#15735 = CARTESIAN_POINT('',(0.,0.));+#15736 = VECTOR('',#15737,1.);+#15737 = DIRECTION('',(1.,0.));+#15738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15739 = PCURVE('',#2082,#15740);+#15740 = DEFINITIONAL_REPRESENTATION('',(#15741),#15745);+#15741 = LINE('',#15742,#15743);+#15742 = CARTESIAN_POINT('',(-0.347850445948,-0.334781226424));+#15743 = VECTOR('',#15744,1.);+#15744 = DIRECTION('',(1.,0.));+#15745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15746 = ADVANCED_FACE('',(#15747),#15372,.F.);+#15747 = FACE_BOUND('',#15748,.F.);+#15748 = EDGE_LOOP('',(#15749,#15772,#15773,#15774));+#15749 = ORIENTED_EDGE('',*,*,#15750,.T.);+#15750 = EDGE_CURVE('',#15751,#15328,#15753,.T.);+#15751 = VERTEX_POINT('',#15752);+#15752 = CARTESIAN_POINT('',(-1.239673570659,0.785,-5.551115123126E-17)+ );+#15753 = SURFACE_CURVE('',#15754,(#15758,#15765),.PCURVE_S1.);+#15754 = LINE('',#15755,#15756);+#15755 = CARTESIAN_POINT('',(-1.239673570659,0.785,-5.551115123126E-17)+ );+#15756 = VECTOR('',#15757,1.);+#15757 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15758 = PCURVE('',#15372,#15759);+#15759 = DEFINITIONAL_REPRESENTATION('',(#15760),#15764);+#15760 = LINE('',#15761,#15762);+#15761 = CARTESIAN_POINT('',(0.,0.));+#15762 = VECTOR('',#15763,1.);+#15763 = DIRECTION('',(0.,-1.));+#15764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15765 = PCURVE('',#15344,#15766);+#15766 = DEFINITIONAL_REPRESENTATION('',(#15767),#15771);+#15767 = LINE('',#15768,#15769);+#15768 = CARTESIAN_POINT('',(4.886921905584,0.));+#15769 = VECTOR('',#15770,1.);+#15770 = DIRECTION('',(0.,-1.));+#15771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15772 = ORIENTED_EDGE('',*,*,#15356,.T.);+#15773 = ORIENTED_EDGE('',*,*,#15701,.F.);+#15774 = ORIENTED_EDGE('',*,*,#15775,.F.);+#15775 = EDGE_CURVE('',#15751,#15702,#15776,.T.);+#15776 = SURFACE_CURVE('',#15777,(#15781,#15788),.PCURVE_S1.);+#15777 = LINE('',#15778,#15779);+#15778 = CARTESIAN_POINT('',(-1.239673570659,0.785,-5.551115123126E-17)+ );+#15779 = VECTOR('',#15780,1.);+#15780 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15781 = PCURVE('',#15372,#15782);+#15782 = DEFINITIONAL_REPRESENTATION('',(#15783),#15787);+#15783 = LINE('',#15784,#15785);+#15784 = CARTESIAN_POINT('',(0.,0.));+#15785 = VECTOR('',#15786,1.);+#15786 = DIRECTION('',(1.,0.));+#15787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15788 = PCURVE('',#2082,#15789);+#15789 = DEFINITIONAL_REPRESENTATION('',(#15790),#15794);+#15790 = LINE('',#15791,#15792);+#15791 = CARTESIAN_POINT('',(-0.347850445948,-0.174454797083));+#15792 = VECTOR('',#15793,1.);+#15793 = DIRECTION('',(0.,-1.));+#15794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15795 = ADVANCED_FACE('',(#15796),#15344,.T.);+#15796 = FACE_BOUND('',#15797,.T.);+#15797 = EDGE_LOOP('',(#15798,#15822,#15823,#15824));+#15798 = ORIENTED_EDGE('',*,*,#15799,.T.);+#15799 = EDGE_CURVE('',#15800,#15751,#15802,.T.);+#15800 = VERTEX_POINT('',#15801);+#15801 = CARTESIAN_POINT('',(-0.993471632406,0.785,0.206587955583));+#15802 = SURFACE_CURVE('',#15803,(#15808,#15815),.PCURVE_S1.);+#15803 = CIRCLE('',#15804,0.25);+#15804 = AXIS2_PLACEMENT_3D('',#15805,#15806,#15807);+#15805 = CARTESIAN_POINT('',(-1.239673570659,0.785,0.25));+#15806 = DIRECTION('',(1.144237745222E-17,1.,-3.851859888774E-34));+#15807 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#15808 = PCURVE('',#15344,#15809);+#15809 = DEFINITIONAL_REPRESENTATION('',(#15810),#15814);+#15810 = LINE('',#15811,#15812);+#15811 = CARTESIAN_POINT('',(6.28318530718,0.));+#15812 = VECTOR('',#15813,1.);+#15813 = DIRECTION('',(-1.,0.));+#15814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15815 = PCURVE('',#2082,#15816);+#15816 = DEFINITIONAL_REPRESENTATION('',(#15817),#15821);+#15817 = CIRCLE('',#15818,0.25);+#15818 = AXIS2_PLACEMENT_2D('',#15819,#15820);+#15819 = CARTESIAN_POINT('',(-9.7850445948E-02,-0.174454797083));+#15820 = DIRECTION('',(-0.173648177667,0.984807753012));+#15821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15822 = ORIENTED_EDGE('',*,*,#15750,.T.);+#15823 = ORIENTED_EDGE('',*,*,#15327,.F.);+#15824 = ORIENTED_EDGE('',*,*,#15825,.F.);+#15825 = EDGE_CURVE('',#15800,#15300,#15826,.T.);+#15826 = SURFACE_CURVE('',#15827,(#15831,#15838),.PCURVE_S1.);+#15827 = LINE('',#15828,#15829);+#15828 = CARTESIAN_POINT('',(-0.993471632406,0.785,0.206587955583));+#15829 = VECTOR('',#15830,1.);+#15830 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15831 = PCURVE('',#15344,#15832);+#15832 = DEFINITIONAL_REPRESENTATION('',(#15833),#15837);+#15833 = LINE('',#15834,#15835);+#15834 = CARTESIAN_POINT('',(6.28318530718,0.));+#15835 = VECTOR('',#15836,1.);+#15836 = DIRECTION('',(0.,-1.));+#15837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15838 = PCURVE('',#15315,#15839);+#15839 = DEFINITIONAL_REPRESENTATION('',(#15840),#15844);+#15840 = LINE('',#15841,#15842);+#15841 = CARTESIAN_POINT('',(0.289296719965,5.14802368897E-19));+#15842 = VECTOR('',#15843,1.);+#15843 = DIRECTION('',(-4.926605106769E-30,-1.));+#15844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15845 = ADVANCED_FACE('',(#15846),#15315,.F.);+#15846 = FACE_BOUND('',#15847,.F.);+#15847 = EDGE_LOOP('',(#15848,#15871,#15872,#15873));+#15848 = ORIENTED_EDGE('',*,*,#15849,.T.);+#15849 = EDGE_CURVE('',#15850,#15267,#15852,.T.);+#15850 = VERTEX_POINT('',#15851);+#15851 = CARTESIAN_POINT('',(-0.948480775301,0.785,0.492364817767));+#15852 = SURFACE_CURVE('',#15853,(#15857,#15864),.PCURVE_S1.);+#15853 = LINE('',#15854,#15855);+#15854 = CARTESIAN_POINT('',(-0.948480775301,0.785,0.492364817767));+#15855 = VECTOR('',#15856,1.);+#15856 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15857 = PCURVE('',#15315,#15858);+#15858 = DEFINITIONAL_REPRESENTATION('',(#15859),#15863);+#15859 = LINE('',#15860,#15861);+#15860 = CARTESIAN_POINT('',(0.,0.));+#15861 = VECTOR('',#15862,1.);+#15862 = DIRECTION('',(-4.926605106769E-30,-1.));+#15863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15864 = PCURVE('',#15287,#15865);+#15865 = DEFINITIONAL_REPRESENTATION('',(#15866),#15870);+#15866 = LINE('',#15867,#15868);+#15867 = CARTESIAN_POINT('',(1.396263401592,0.));+#15868 = VECTOR('',#15869,1.);+#15869 = DIRECTION('',(0.,-1.));+#15870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15871 = ORIENTED_EDGE('',*,*,#15299,.T.);+#15872 = ORIENTED_EDGE('',*,*,#15825,.F.);+#15873 = ORIENTED_EDGE('',*,*,#15874,.F.);+#15874 = EDGE_CURVE('',#15850,#15800,#15875,.T.);+#15875 = SURFACE_CURVE('',#15876,(#15880,#15887),.PCURVE_S1.);+#15876 = LINE('',#15877,#15878);+#15877 = CARTESIAN_POINT('',(-0.948480775301,0.785,0.492364817767));+#15878 = VECTOR('',#15879,1.);+#15879 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#15880 = PCURVE('',#15315,#15881);+#15881 = DEFINITIONAL_REPRESENTATION('',(#15882),#15886);+#15882 = LINE('',#15883,#15884);+#15883 = CARTESIAN_POINT('',(0.,0.));+#15884 = VECTOR('',#15885,1.);+#15885 = DIRECTION('',(1.,-6.052038146458E-35));+#15886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15887 = PCURVE('',#2082,#15888);+#15888 = DEFINITIONAL_REPRESENTATION('',(#15889),#15893);+#15889 = LINE('',#15890,#15891);+#15890 = CARTESIAN_POINT('',(0.144514371819,0.116737998275));+#15891 = VECTOR('',#15892,1.);+#15892 = DIRECTION('',(-0.987833053268,-0.155518033909));+#15893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15894 = ADVANCED_FACE('',(#15895),#15287,.F.);+#15895 = FACE_BOUND('',#15896,.F.);+#15896 = EDGE_LOOP('',(#15897,#15920,#15921,#15922));+#15897 = ORIENTED_EDGE('',*,*,#15898,.T.);+#15898 = EDGE_CURVE('',#15899,#15244,#15901,.T.);+#15899 = VERTEX_POINT('',#15900);+#15900 = CARTESIAN_POINT('',(-0.85,0.785,0.575));+#15901 = SURFACE_CURVE('',#15902,(#15906,#15913),.PCURVE_S1.);+#15902 = LINE('',#15903,#15904);+#15903 = CARTESIAN_POINT('',(-0.85,0.785,0.575));+#15904 = VECTOR('',#15905,1.);+#15905 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15906 = PCURVE('',#15287,#15907);+#15907 = DEFINITIONAL_REPRESENTATION('',(#15908),#15912);+#15908 = LINE('',#15909,#15910);+#15909 = CARTESIAN_POINT('',(0.,0.));+#15910 = VECTOR('',#15911,1.);+#15911 = DIRECTION('',(0.,-1.));+#15912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15913 = PCURVE('',#306,#15914);+#15914 = DEFINITIONAL_REPRESENTATION('',(#15915),#15919);+#15915 = LINE('',#15916,#15917);+#15916 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));+#15917 = VECTOR('',#15918,1.);+#15918 = DIRECTION('',(0.,-1.));+#15919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15920 = ORIENTED_EDGE('',*,*,#15266,.T.);+#15921 = ORIENTED_EDGE('',*,*,#15849,.F.);+#15922 = ORIENTED_EDGE('',*,*,#15923,.F.);+#15923 = EDGE_CURVE('',#15899,#15850,#15924,.T.);+#15924 = SURFACE_CURVE('',#15925,(#15930,#15937),.PCURVE_S1.);+#15925 = CIRCLE('',#15926,0.1);+#15926 = AXIS2_PLACEMENT_3D('',#15927,#15928,#15929);+#15927 = CARTESIAN_POINT('',(-0.85,0.785,0.475));+#15928 = DIRECTION('',(-1.144237745222E-17,-1.,5.473822126269E-48));+#15929 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#15930 = PCURVE('',#15287,#15931);+#15931 = DEFINITIONAL_REPRESENTATION('',(#15932),#15936);+#15932 = LINE('',#15933,#15934);+#15933 = CARTESIAN_POINT('',(0.,0.));+#15934 = VECTOR('',#15935,1.);+#15935 = DIRECTION('',(1.,0.));+#15936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15937 = PCURVE('',#2082,#15938);+#15938 = DEFINITIONAL_REPRESENTATION('',(#15939),#15947);+#15939 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15940,#15941,#15942,#15943+ ,#15944,#15945,#15946),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15940 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#15941 = CARTESIAN_POINT('',(0.227149554052,4.201369281911E-02));+#15942 = CARTESIAN_POINT('',(7.7149554052E-02,0.128616233198));+#15943 = CARTESIAN_POINT('',(-7.2850445948E-02,0.215218773576));+#15944 = CARTESIAN_POINT('',(7.7149554052E-02,0.301821313954));+#15945 = CARTESIAN_POINT('',(0.227149554052,0.388423854333));+#15946 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#15947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15948 = ADVANCED_FACE('',(#15949),#2110,.T.);+#15949 = FACE_BOUND('',#15950,.T.);+#15950 = EDGE_LOOP('',(#15951,#15973,#15974,#15975));+#15951 = ORIENTED_EDGE('',*,*,#15952,.T.);+#15952 = EDGE_CURVE('',#15552,#2067,#15953,.T.);+#15953 = SURFACE_CURVE('',#15954,(#15959,#15966),.PCURVE_S1.);+#15954 = CIRCLE('',#15955,0.25);+#15955 = AXIS2_PLACEMENT_3D('',#15956,#15957,#15958);+#15956 = CARTESIAN_POINT('',(-0.85,0.785,0.475));+#15957 = DIRECTION('',(1.144237745222E-17,1.,1.54074395551E-33));+#15958 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#15959 = PCURVE('',#2110,#15960);+#15960 = DEFINITIONAL_REPRESENTATION('',(#15961),#15965);+#15961 = LINE('',#15962,#15963);+#15962 = CARTESIAN_POINT('',(6.28318530718,0.));+#15963 = VECTOR('',#15964,1.);+#15964 = DIRECTION('',(-1.,0.));+#15965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15966 = PCURVE('',#2082,#15967);+#15967 = DEFINITIONAL_REPRESENTATION('',(#15968),#15972);+#15968 = CIRCLE('',#15969,0.25);+#15969 = AXIS2_PLACEMENT_2D('',#15970,#15971);+#15970 = CARTESIAN_POINT('',(0.127149554052,0.215218773576));+#15971 = DIRECTION('',(0.173648177667,-0.984807753012));+#15972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15973 = ORIENTED_EDGE('',*,*,#2094,.T.);+#15974 = ORIENTED_EDGE('',*,*,#15501,.F.);+#15975 = ORIENTED_EDGE('',*,*,#15551,.F.);+#15976 = ADVANCED_FACE('',(#15977),#2082,.F.);+#15977 = FACE_BOUND('',#15978,.F.);+#15978 = EDGE_LOOP('',(#15979,#16000,#16021,#16022,#16023,#16024,#16025,+ #16026,#16027,#16028,#16029,#16030));+#15979 = ORIENTED_EDGE('',*,*,#15980,.F.);+#15980 = EDGE_CURVE('',#291,#2044,#15981,.T.);+#15981 = SURFACE_CURVE('',#15982,(#15986,#15993),.PCURVE_S1.);+#15982 = LINE('',#15983,#15984);+#15983 = CARTESIAN_POINT('',(-0.8,0.785,0.536425222974));+#15984 = VECTOR('',#15985,1.);+#15985 = DIRECTION('',(0.,0.,1.));+#15986 = PCURVE('',#2082,#15987);+#15987 = DEFINITIONAL_REPRESENTATION('',(#15988),#15992);+#15988 = LINE('',#15989,#15990);+#15989 = CARTESIAN_POINT('',(0.188574777026,0.265218773576));+#15990 = VECTOR('',#15991,1.);+#15991 = DIRECTION('',(1.,0.));+#15992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15993 = PCURVE('',#334,#15994);+#15994 = DEFINITIONAL_REPRESENTATION('',(#15995),#15999);+#15995 = LINE('',#15996,#15997);+#15996 = CARTESIAN_POINT('',(2.14,-0.188574777026));+#15997 = VECTOR('',#15998,1.);+#15998 = DIRECTION('',(0.,1.));+#15999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16000 = ORIENTED_EDGE('',*,*,#16001,.T.);+#16001 = EDGE_CURVE('',#291,#15899,#16002,.T.);+#16002 = SURFACE_CURVE('',#16003,(#16007,#16014),.PCURVE_S1.);+#16003 = LINE('',#16004,#16005);+#16004 = CARTESIAN_POINT('',(-0.75,0.785,0.575));+#16005 = VECTOR('',#16006,1.);+#16006 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16007 = PCURVE('',#2082,#16008);+#16008 = DEFINITIONAL_REPRESENTATION('',(#16009),#16013);+#16009 = LINE('',#16010,#16011);+#16010 = CARTESIAN_POINT('',(0.227149554052,0.315218773576));+#16011 = VECTOR('',#16012,1.);+#16012 = DIRECTION('',(0.,-1.));+#16013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16014 = PCURVE('',#306,#16015);+#16015 = DEFINITIONAL_REPRESENTATION('',(#16016),#16020);+#16016 = LINE('',#16017,#16018);+#16017 = CARTESIAN_POINT('',(0.,0.));+#16018 = VECTOR('',#16019,1.);+#16019 = DIRECTION('',(1.,0.));+#16020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16021 = ORIENTED_EDGE('',*,*,#15923,.T.);+#16022 = ORIENTED_EDGE('',*,*,#15874,.T.);+#16023 = ORIENTED_EDGE('',*,*,#15799,.T.);+#16024 = ORIENTED_EDGE('',*,*,#15775,.T.);+#16025 = ORIENTED_EDGE('',*,*,#15726,.T.);+#16026 = ORIENTED_EDGE('',*,*,#15677,.T.);+#16027 = ORIENTED_EDGE('',*,*,#15623,.T.);+#16028 = ORIENTED_EDGE('',*,*,#15574,.T.);+#16029 = ORIENTED_EDGE('',*,*,#15952,.T.);+#16030 = ORIENTED_EDGE('',*,*,#2066,.T.);+#16031 = ADVANCED_FACE('',(#16032),#2031,.T.);+#16032 = FACE_BOUND('',#16033,.T.);+#16033 = EDGE_LOOP('',(#16034,#16055,#16078,#16111,#16139,#16168,#16196,+ #16224,#16252,#16285,#16313,#16335));+#16034 = ORIENTED_EDGE('',*,*,#16035,.F.);+#16035 = EDGE_CURVE('',#319,#2016,#16036,.T.);+#16036 = SURFACE_CURVE('',#16037,(#16041,#16048),.PCURVE_S1.);+#16037 = LINE('',#16038,#16039);+#16038 = CARTESIAN_POINT('',(-0.8,0.515,0.536425222974));+#16039 = VECTOR('',#16040,1.);+#16040 = DIRECTION('',(0.,0.,1.));+#16041 = PCURVE('',#2031,#16042);+#16042 = DEFINITIONAL_REPRESENTATION('',(#16043),#16047);+#16043 = LINE('',#16044,#16045);+#16044 = CARTESIAN_POINT('',(0.188574777026,0.265218773576));+#16045 = VECTOR('',#16046,1.);+#16046 = DIRECTION('',(1.,0.));+#16047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16048 = PCURVE('',#334,#16049);+#16049 = DEFINITIONAL_REPRESENTATION('',(#16050),#16054);+#16050 = LINE('',#16051,#16052);+#16051 = CARTESIAN_POINT('',(1.87,-0.188574777026));+#16052 = VECTOR('',#16053,1.);+#16053 = DIRECTION('',(0.,1.));+#16054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16055 = ORIENTED_EDGE('',*,*,#16056,.T.);+#16056 = EDGE_CURVE('',#319,#16057,#16059,.T.);+#16057 = VERTEX_POINT('',#16058);+#16058 = CARTESIAN_POINT('',(-0.85,0.515,0.575));+#16059 = SURFACE_CURVE('',#16060,(#16064,#16071),.PCURVE_S1.);+#16060 = LINE('',#16061,#16062);+#16061 = CARTESIAN_POINT('',(-0.75,0.515,0.575));+#16062 = VECTOR('',#16063,1.);+#16063 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16064 = PCURVE('',#2031,#16065);+#16065 = DEFINITIONAL_REPRESENTATION('',(#16066),#16070);+#16066 = LINE('',#16067,#16068);+#16067 = CARTESIAN_POINT('',(0.227149554052,0.315218773576));+#16068 = VECTOR('',#16069,1.);+#16069 = DIRECTION('',(0.,-1.));+#16070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16071 = PCURVE('',#362,#16072);+#16072 = DEFINITIONAL_REPRESENTATION('',(#16073),#16077);+#16073 = LINE('',#16074,#16075);+#16074 = CARTESIAN_POINT('',(4.348103431844E-18,-0.38));+#16075 = VECTOR('',#16076,1.);+#16076 = DIRECTION('',(1.,0.));+#16077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16078 = ORIENTED_EDGE('',*,*,#16079,.T.);+#16079 = EDGE_CURVE('',#16057,#16080,#16082,.T.);+#16080 = VERTEX_POINT('',#16081);+#16081 = CARTESIAN_POINT('',(-0.948480775301,0.515,0.492364817767));+#16082 = SURFACE_CURVE('',#16083,(#16088,#16099),.PCURVE_S1.);+#16083 = CIRCLE('',#16084,0.1);+#16084 = AXIS2_PLACEMENT_3D('',#16085,#16086,#16087);+#16085 = CARTESIAN_POINT('',(-0.85,0.515,0.475));+#16086 = DIRECTION('',(-1.144237745222E-17,-1.,5.473822126269E-48));+#16087 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#16088 = PCURVE('',#2031,#16089);+#16089 = DEFINITIONAL_REPRESENTATION('',(#16090),#16098);+#16090 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16091,#16092,#16093,#16094+ ,#16095,#16096,#16097),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16091 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#16092 = CARTESIAN_POINT('',(0.227149554052,4.201369281911E-02));+#16093 = CARTESIAN_POINT('',(7.7149554052E-02,0.128616233198));+#16094 = CARTESIAN_POINT('',(-7.2850445948E-02,0.215218773576));+#16095 = CARTESIAN_POINT('',(7.7149554052E-02,0.301821313954));+#16096 = CARTESIAN_POINT('',(0.227149554052,0.388423854333));+#16097 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#16098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16099 = PCURVE('',#16100,#16105);+#16100 = CYLINDRICAL_SURFACE('',#16101,0.1);+#16101 = AXIS2_PLACEMENT_3D('',#16102,#16103,#16104);+#16102 = CARTESIAN_POINT('',(-0.85,0.135,0.475));+#16103 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16104 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#16105 = DEFINITIONAL_REPRESENTATION('',(#16106),#16110);+#16106 = LINE('',#16107,#16108);+#16107 = CARTESIAN_POINT('',(0.,-0.38));+#16108 = VECTOR('',#16109,1.);+#16109 = DIRECTION('',(1.,0.));+#16110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16111 = ORIENTED_EDGE('',*,*,#16112,.T.);+#16112 = EDGE_CURVE('',#16080,#16113,#16115,.T.);+#16113 = VERTEX_POINT('',#16114);+#16114 = CARTESIAN_POINT('',(-0.993471632406,0.515,0.206587955583));+#16115 = SURFACE_CURVE('',#16116,(#16120,#16127),.PCURVE_S1.);+#16116 = LINE('',#16117,#16118);+#16117 = CARTESIAN_POINT('',(-0.948480775301,0.515,0.492364817767));+#16118 = VECTOR('',#16119,1.);+#16119 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#16120 = PCURVE('',#2031,#16121);+#16121 = DEFINITIONAL_REPRESENTATION('',(#16122),#16126);+#16122 = LINE('',#16123,#16124);+#16123 = CARTESIAN_POINT('',(0.144514371819,0.116737998275));+#16124 = VECTOR('',#16125,1.);+#16125 = DIRECTION('',(-0.987833053268,-0.155518033909));+#16126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16127 = PCURVE('',#16128,#16133);+#16128 = PLANE('',#16129);+#16129 = AXIS2_PLACEMENT_3D('',#16130,#16131,#16132);+#16130 = CARTESIAN_POINT('',(-0.948480775301,0.135,0.492364817767));+#16131 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909+ ));+#16132 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#16133 = DEFINITIONAL_REPRESENTATION('',(#16134),#16138);+#16134 = LINE('',#16135,#16136);+#16135 = CARTESIAN_POINT('',(6.762084969515E-19,-0.38));+#16136 = VECTOR('',#16137,1.);+#16137 = DIRECTION('',(1.,-6.052038146458E-35));+#16138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16139 = ORIENTED_EDGE('',*,*,#16140,.T.);+#16140 = EDGE_CURVE('',#16113,#16141,#16143,.T.);+#16141 = VERTEX_POINT('',#16142);+#16142 = CARTESIAN_POINT('',(-1.239673570659,0.515,-5.551115123126E-17)+ );+#16143 = SURFACE_CURVE('',#16144,(#16149,#16156),.PCURVE_S1.);+#16144 = CIRCLE('',#16145,0.25);+#16145 = AXIS2_PLACEMENT_3D('',#16146,#16147,#16148);+#16146 = CARTESIAN_POINT('',(-1.239673570659,0.515,0.25));+#16147 = DIRECTION('',(1.144237745222E-17,1.,-3.851859888774E-34));+#16148 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#16149 = PCURVE('',#2031,#16150);+#16150 = DEFINITIONAL_REPRESENTATION('',(#16151),#16155);+#16151 = CIRCLE('',#16152,0.25);+#16152 = AXIS2_PLACEMENT_2D('',#16153,#16154);+#16153 = CARTESIAN_POINT('',(-9.7850445948E-02,-0.174454797083));+#16154 = DIRECTION('',(-0.173648177667,0.984807753012));+#16155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16156 = PCURVE('',#16157,#16162);+#16157 = CYLINDRICAL_SURFACE('',#16158,0.25);+#16158 = AXIS2_PLACEMENT_3D('',#16159,#16160,#16161);+#16159 = CARTESIAN_POINT('',(-1.239673570659,0.135,0.25));+#16160 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16161 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#16162 = DEFINITIONAL_REPRESENTATION('',(#16163),#16167);+#16163 = LINE('',#16164,#16165);+#16164 = CARTESIAN_POINT('',(6.28318530718,-0.38));+#16165 = VECTOR('',#16166,1.);+#16166 = DIRECTION('',(-1.,0.));+#16167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16168 = ORIENTED_EDGE('',*,*,#16169,.T.);+#16169 = EDGE_CURVE('',#16141,#16170,#16172,.T.);+#16170 = VERTEX_POINT('',#16171);+#16171 = CARTESIAN_POINT('',(-1.4,0.515,-5.551115123126E-17));+#16172 = SURFACE_CURVE('',#16173,(#16177,#16184),.PCURVE_S1.);+#16173 = LINE('',#16174,#16175);+#16174 = CARTESIAN_POINT('',(-1.239673570659,0.515,-5.551115123126E-17)+ );+#16175 = VECTOR('',#16176,1.);+#16176 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16177 = PCURVE('',#2031,#16178);+#16178 = DEFINITIONAL_REPRESENTATION('',(#16179),#16183);+#16179 = LINE('',#16180,#16181);+#16180 = CARTESIAN_POINT('',(-0.347850445948,-0.174454797083));+#16181 = VECTOR('',#16182,1.);+#16182 = DIRECTION('',(0.,-1.));+#16183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16184 = PCURVE('',#16185,#16190);+#16185 = PLANE('',#16186);+#16186 = AXIS2_PLACEMENT_3D('',#16187,#16188,#16189);+#16187 = CARTESIAN_POINT('',(-1.239673570659,0.135,-5.551115123126E-17)+ );+#16188 = DIRECTION('',(0.,0.,1.));+#16189 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16190 = DEFINITIONAL_REPRESENTATION('',(#16191),#16195);+#16191 = LINE('',#16192,#16193);+#16192 = CARTESIAN_POINT('',(4.348103431844E-18,-0.38));+#16193 = VECTOR('',#16194,1.);+#16194 = DIRECTION('',(1.,0.));+#16195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16196 = ORIENTED_EDGE('',*,*,#16197,.T.);+#16197 = EDGE_CURVE('',#16170,#16198,#16200,.T.);+#16198 = VERTEX_POINT('',#16199);+#16199 = CARTESIAN_POINT('',(-1.4,0.515,0.15));+#16200 = SURFACE_CURVE('',#16201,(#16205,#16212),.PCURVE_S1.);+#16201 = LINE('',#16202,#16203);+#16202 = CARTESIAN_POINT('',(-1.4,0.515,-5.551115123126E-17));+#16203 = VECTOR('',#16204,1.);+#16204 = DIRECTION('',(0.,0.,1.));+#16205 = PCURVE('',#2031,#16206);+#16206 = DEFINITIONAL_REPRESENTATION('',(#16207),#16211);+#16207 = LINE('',#16208,#16209);+#16208 = CARTESIAN_POINT('',(-0.347850445948,-0.334781226424));+#16209 = VECTOR('',#16210,1.);+#16210 = DIRECTION('',(1.,0.));+#16211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16212 = PCURVE('',#16213,#16218);+#16213 = PLANE('',#16214);+#16214 = AXIS2_PLACEMENT_3D('',#16215,#16216,#16217);+#16215 = CARTESIAN_POINT('',(-1.4,0.135,-5.551115123126E-17));+#16216 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16217 = DIRECTION('',(0.,0.,1.));+#16218 = DEFINITIONAL_REPRESENTATION('',(#16219),#16223);+#16219 = LINE('',#16220,#16221);+#16220 = CARTESIAN_POINT('',(0.,-0.38));+#16221 = VECTOR('',#16222,1.);+#16222 = DIRECTION('',(1.,0.));+#16223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16224 = ORIENTED_EDGE('',*,*,#16225,.T.);+#16225 = EDGE_CURVE('',#16198,#16226,#16228,.T.);+#16226 = VERTEX_POINT('',#16227);+#16227 = CARTESIAN_POINT('',(-1.239673570659,0.515,0.15));+#16228 = SURFACE_CURVE('',#16229,(#16233,#16240),.PCURVE_S1.);+#16229 = LINE('',#16230,#16231);+#16230 = CARTESIAN_POINT('',(-1.4,0.515,0.15));+#16231 = VECTOR('',#16232,1.);+#16232 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16233 = PCURVE('',#2031,#16234);+#16234 = DEFINITIONAL_REPRESENTATION('',(#16235),#16239);+#16235 = LINE('',#16236,#16237);+#16236 = CARTESIAN_POINT('',(-0.197850445948,-0.334781226424));+#16237 = VECTOR('',#16238,1.);+#16238 = DIRECTION('',(0.,1.));+#16239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16240 = PCURVE('',#16241,#16246);+#16241 = PLANE('',#16242);+#16242 = AXIS2_PLACEMENT_3D('',#16243,#16244,#16245);+#16243 = CARTESIAN_POINT('',(-1.4,0.135,0.15));+#16244 = DIRECTION('',(0.,0.,-1.));+#16245 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16246 = DEFINITIONAL_REPRESENTATION('',(#16247),#16251);+#16247 = LINE('',#16248,#16249);+#16248 = CARTESIAN_POINT('',(-4.348103431844E-18,-0.38));+#16249 = VECTOR('',#16250,1.);+#16250 = DIRECTION('',(1.,0.));+#16251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16252 = ORIENTED_EDGE('',*,*,#16253,.T.);+#16253 = EDGE_CURVE('',#16226,#16254,#16256,.T.);+#16254 = VERTEX_POINT('',#16255);+#16255 = CARTESIAN_POINT('',(-1.141192795358,0.515,0.232635182233));+#16256 = SURFACE_CURVE('',#16257,(#16262,#16273),.PCURVE_S1.);+#16257 = CIRCLE('',#16258,0.1);+#16258 = AXIS2_PLACEMENT_3D('',#16259,#16260,#16261);+#16259 = CARTESIAN_POINT('',(-1.239673570659,0.515,0.25));+#16260 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#16261 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#16262 = PCURVE('',#2031,#16263);+#16263 = DEFINITIONAL_REPRESENTATION('',(#16264),#16272);+#16264 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16265,#16266,#16267,#16268+ ,#16269,#16270,#16271),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16265 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#16266 = CARTESIAN_POINT('',(-0.197850445948,-1.249716326112E-03));+#16267 = CARTESIAN_POINT('',(-4.7850445948E-02,-8.785225670456E-02));+#16268 = CARTESIAN_POINT('',(0.102149554052,-0.174454797083));+#16269 = CARTESIAN_POINT('',(-4.7850445948E-02,-0.261057337461));+#16270 = CARTESIAN_POINT('',(-0.197850445948,-0.34765987784));+#16271 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#16272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16273 = PCURVE('',#16274,#16279);+#16274 = CYLINDRICAL_SURFACE('',#16275,0.1);+#16275 = AXIS2_PLACEMENT_3D('',#16276,#16277,#16278);+#16276 = CARTESIAN_POINT('',(-1.239673570659,0.135,0.25));+#16277 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16278 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#16279 = DEFINITIONAL_REPRESENTATION('',(#16280),#16284);+#16280 = LINE('',#16281,#16282);+#16281 = CARTESIAN_POINT('',(0.,-0.38));+#16282 = VECTOR('',#16283,1.);+#16283 = DIRECTION('',(1.,0.));+#16284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16285 = ORIENTED_EDGE('',*,*,#16286,.T.);+#16286 = EDGE_CURVE('',#16254,#16287,#16289,.T.);+#16287 = VERTEX_POINT('',#16288);+#16288 = CARTESIAN_POINT('',(-1.096201938253,0.515,0.518412044417));+#16289 = SURFACE_CURVE('',#16290,(#16294,#16301),.PCURVE_S1.);+#16290 = LINE('',#16291,#16292);+#16291 = CARTESIAN_POINT('',(-1.141192795358,0.515,0.232635182233));+#16292 = VECTOR('',#16293,1.);+#16293 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#16294 = PCURVE('',#2031,#16295);+#16295 = DEFINITIONAL_REPRESENTATION('',(#16296),#16300);+#16296 = LINE('',#16297,#16298);+#16297 = CARTESIAN_POINT('',(-0.115215263715,-7.5974021782E-02));+#16298 = VECTOR('',#16299,1.);+#16299 = DIRECTION('',(0.987833053268,0.155518033909));+#16300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16301 = PCURVE('',#16302,#16307);+#16302 = PLANE('',#16303);+#16303 = AXIS2_PLACEMENT_3D('',#16304,#16305,#16306);+#16304 = CARTESIAN_POINT('',(-1.141192795358,0.135,0.232635182233));+#16305 = DIRECTION('',(0.987833053268,-1.130315865527E-17,+ -0.155518033909));+#16306 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#16307 = DEFINITIONAL_REPRESENTATION('',(#16308),#16312);+#16308 = LINE('',#16309,#16310);+#16309 = CARTESIAN_POINT('',(-6.762084969515E-19,-0.38));+#16310 = VECTOR('',#16311,1.);+#16311 = DIRECTION('',(1.,6.052038146458E-35));+#16312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16313 = ORIENTED_EDGE('',*,*,#16314,.T.);+#16314 = EDGE_CURVE('',#16287,#1988,#16315,.T.);+#16315 = SURFACE_CURVE('',#16316,(#16321,#16328),.PCURVE_S1.);+#16316 = CIRCLE('',#16317,0.25);+#16317 = AXIS2_PLACEMENT_3D('',#16318,#16319,#16320);+#16318 = CARTESIAN_POINT('',(-0.85,0.515,0.475));+#16319 = DIRECTION('',(1.144237745222E-17,1.,1.54074395551E-33));+#16320 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#16321 = PCURVE('',#2031,#16322);+#16322 = DEFINITIONAL_REPRESENTATION('',(#16323),#16327);+#16323 = CIRCLE('',#16324,0.25);+#16324 = AXIS2_PLACEMENT_2D('',#16325,#16326);+#16325 = CARTESIAN_POINT('',(0.127149554052,0.215218773576));+#16326 = DIRECTION('',(0.173648177667,-0.984807753012));+#16327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16328 = PCURVE('',#2003,#16329);+#16329 = DEFINITIONAL_REPRESENTATION('',(#16330),#16334);+#16330 = LINE('',#16331,#16332);+#16331 = CARTESIAN_POINT('',(6.28318530718,-0.38));+#16332 = VECTOR('',#16333,1.);+#16333 = DIRECTION('',(-1.,0.));+#16334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16335 = ORIENTED_EDGE('',*,*,#2015,.T.);+#16336 = ADVANCED_FACE('',(#16337),#16302,.F.);+#16337 = FACE_BOUND('',#16338,.F.);+#16338 = EDGE_LOOP('',(#16339,#16362,#16363,#16386));+#16339 = ORIENTED_EDGE('',*,*,#16340,.T.);+#16340 = EDGE_CURVE('',#16341,#16254,#16343,.T.);+#16341 = VERTEX_POINT('',#16342);+#16342 = CARTESIAN_POINT('',(-1.141192795358,0.135,0.232635182233));+#16343 = SURFACE_CURVE('',#16344,(#16348,#16355),.PCURVE_S1.);+#16344 = LINE('',#16345,#16346);+#16345 = CARTESIAN_POINT('',(-1.141192795358,0.135,0.232635182233));+#16346 = VECTOR('',#16347,1.);+#16347 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16348 = PCURVE('',#16302,#16349);+#16349 = DEFINITIONAL_REPRESENTATION('',(#16350),#16354);+#16350 = LINE('',#16351,#16352);+#16351 = CARTESIAN_POINT('',(0.,0.));+#16352 = VECTOR('',#16353,1.);+#16353 = DIRECTION('',(4.926605106769E-30,-1.));+#16354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16355 = PCURVE('',#16274,#16356);+#16356 = DEFINITIONAL_REPRESENTATION('',(#16357),#16361);+#16357 = LINE('',#16358,#16359);+#16358 = CARTESIAN_POINT('',(1.396263401592,-2.775557561563E-17));+#16359 = VECTOR('',#16360,1.);+#16360 = DIRECTION('',(0.,-1.));+#16361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16362 = ORIENTED_EDGE('',*,*,#16286,.T.);+#16363 = ORIENTED_EDGE('',*,*,#16364,.F.);+#16364 = EDGE_CURVE('',#16365,#16287,#16367,.T.);+#16365 = VERTEX_POINT('',#16366);+#16366 = CARTESIAN_POINT('',(-1.096201938253,0.135,0.518412044417));+#16367 = SURFACE_CURVE('',#16368,(#16372,#16379),.PCURVE_S1.);+#16368 = LINE('',#16369,#16370);+#16369 = CARTESIAN_POINT('',(-1.096201938253,0.135,0.518412044417));+#16370 = VECTOR('',#16371,1.);+#16371 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16372 = PCURVE('',#16302,#16373);+#16373 = DEFINITIONAL_REPRESENTATION('',(#16374),#16378);+#16374 = LINE('',#16375,#16376);+#16375 = CARTESIAN_POINT('',(0.289296719965,-5.14802368897E-19));+#16376 = VECTOR('',#16377,1.);+#16377 = DIRECTION('',(4.926605106769E-30,-1.));+#16378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16379 = PCURVE('',#2003,#16380);+#16380 = DEFINITIONAL_REPRESENTATION('',(#16381),#16385);+#16381 = LINE('',#16382,#16383);+#16382 = CARTESIAN_POINT('',(6.28318530718,0.));+#16383 = VECTOR('',#16384,1.);+#16384 = DIRECTION('',(0.,-1.));+#16385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16386 = ORIENTED_EDGE('',*,*,#16387,.F.);+#16387 = EDGE_CURVE('',#16341,#16365,#16388,.T.);+#16388 = SURFACE_CURVE('',#16389,(#16393,#16400),.PCURVE_S1.);+#16389 = LINE('',#16390,#16391);+#16390 = CARTESIAN_POINT('',(-1.141192795358,0.135,0.232635182233));+#16391 = VECTOR('',#16392,1.);+#16392 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#16393 = PCURVE('',#16302,#16394);+#16394 = DEFINITIONAL_REPRESENTATION('',(#16395),#16399);+#16395 = LINE('',#16396,#16397);+#16396 = CARTESIAN_POINT('',(0.,0.));+#16397 = VECTOR('',#16398,1.);+#16398 = DIRECTION('',(1.,6.052038146458E-35));+#16399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16400 = PCURVE('',#1975,#16401);+#16401 = DEFINITIONAL_REPRESENTATION('',(#16402),#16406);+#16402 = LINE('',#16403,#16404);+#16403 = CARTESIAN_POINT('',(-0.115215263715,-7.5974021782E-02));+#16404 = VECTOR('',#16405,1.);+#16405 = DIRECTION('',(0.987833053268,0.155518033909));+#16406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16407 = ADVANCED_FACE('',(#16408),#16274,.F.);+#16408 = FACE_BOUND('',#16409,.F.);+#16409 = EDGE_LOOP('',(#16410,#16433,#16434,#16435));+#16410 = ORIENTED_EDGE('',*,*,#16411,.T.);+#16411 = EDGE_CURVE('',#16412,#16226,#16414,.T.);+#16412 = VERTEX_POINT('',#16413);+#16413 = CARTESIAN_POINT('',(-1.239673570659,0.135,0.15));+#16414 = SURFACE_CURVE('',#16415,(#16419,#16426),.PCURVE_S1.);+#16415 = LINE('',#16416,#16417);+#16416 = CARTESIAN_POINT('',(-1.239673570659,0.135,0.15));+#16417 = VECTOR('',#16418,1.);+#16418 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16419 = PCURVE('',#16274,#16420);+#16420 = DEFINITIONAL_REPRESENTATION('',(#16421),#16425);+#16421 = LINE('',#16422,#16423);+#16422 = CARTESIAN_POINT('',(0.,0.));+#16423 = VECTOR('',#16424,1.);+#16424 = DIRECTION('',(0.,-1.));+#16425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16426 = PCURVE('',#16241,#16427);+#16427 = DEFINITIONAL_REPRESENTATION('',(#16428),#16432);+#16428 = LINE('',#16429,#16430);+#16429 = CARTESIAN_POINT('',(0.160326429341,-1.834515520086E-18));+#16430 = VECTOR('',#16431,1.);+#16431 = DIRECTION('',(0.,-1.));+#16432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16433 = ORIENTED_EDGE('',*,*,#16253,.T.);+#16434 = ORIENTED_EDGE('',*,*,#16340,.F.);+#16435 = ORIENTED_EDGE('',*,*,#16436,.F.);+#16436 = EDGE_CURVE('',#16412,#16341,#16437,.T.);+#16437 = SURFACE_CURVE('',#16438,(#16443,#16450),.PCURVE_S1.);+#16438 = CIRCLE('',#16439,0.1);+#16439 = AXIS2_PLACEMENT_3D('',#16440,#16441,#16442);+#16440 = CARTESIAN_POINT('',(-1.239673570659,0.135,0.25));+#16441 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#16442 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#16443 = PCURVE('',#16274,#16444);+#16444 = DEFINITIONAL_REPRESENTATION('',(#16445),#16449);+#16445 = LINE('',#16446,#16447);+#16446 = CARTESIAN_POINT('',(0.,0.));+#16447 = VECTOR('',#16448,1.);+#16448 = DIRECTION('',(1.,-1.98784667592E-17));+#16449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16450 = PCURVE('',#1975,#16451);+#16451 = DEFINITIONAL_REPRESENTATION('',(#16452),#16460);+#16452 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16453,#16454,#16455,#16456+ ,#16457,#16458,#16459),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16453 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#16454 = CARTESIAN_POINT('',(-0.197850445948,-1.249716326112E-03));+#16455 = CARTESIAN_POINT('',(-4.7850445948E-02,-8.785225670456E-02));+#16456 = CARTESIAN_POINT('',(0.102149554052,-0.174454797083));+#16457 = CARTESIAN_POINT('',(-4.7850445948E-02,-0.261057337461));+#16458 = CARTESIAN_POINT('',(-0.197850445948,-0.34765987784));+#16459 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#16460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16461 = ADVANCED_FACE('',(#16462),#16241,.F.);+#16462 = FACE_BOUND('',#16463,.F.);+#16463 = EDGE_LOOP('',(#16464,#16487,#16488,#16489));+#16464 = ORIENTED_EDGE('',*,*,#16465,.T.);+#16465 = EDGE_CURVE('',#16466,#16198,#16468,.T.);+#16466 = VERTEX_POINT('',#16467);+#16467 = CARTESIAN_POINT('',(-1.4,0.135,0.15));+#16468 = SURFACE_CURVE('',#16469,(#16473,#16480),.PCURVE_S1.);+#16469 = LINE('',#16470,#16471);+#16470 = CARTESIAN_POINT('',(-1.4,0.135,0.15));+#16471 = VECTOR('',#16472,1.);+#16472 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16473 = PCURVE('',#16241,#16474);+#16474 = DEFINITIONAL_REPRESENTATION('',(#16475),#16479);+#16475 = LINE('',#16476,#16477);+#16476 = CARTESIAN_POINT('',(0.,-0.));+#16477 = VECTOR('',#16478,1.);+#16478 = DIRECTION('',(0.,-1.));+#16479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16480 = PCURVE('',#16213,#16481);+#16481 = DEFINITIONAL_REPRESENTATION('',(#16482),#16486);+#16482 = LINE('',#16483,#16484);+#16483 = CARTESIAN_POINT('',(0.15,0.));+#16484 = VECTOR('',#16485,1.);+#16485 = DIRECTION('',(0.,-1.));+#16486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16487 = ORIENTED_EDGE('',*,*,#16225,.T.);+#16488 = ORIENTED_EDGE('',*,*,#16411,.F.);+#16489 = ORIENTED_EDGE('',*,*,#16490,.F.);+#16490 = EDGE_CURVE('',#16466,#16412,#16491,.T.);+#16491 = SURFACE_CURVE('',#16492,(#16496,#16503),.PCURVE_S1.);+#16492 = LINE('',#16493,#16494);+#16493 = CARTESIAN_POINT('',(-1.4,0.135,0.15));+#16494 = VECTOR('',#16495,1.);+#16495 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16496 = PCURVE('',#16241,#16497);+#16497 = DEFINITIONAL_REPRESENTATION('',(#16498),#16502);+#16498 = LINE('',#16499,#16500);+#16499 = CARTESIAN_POINT('',(0.,-0.));+#16500 = VECTOR('',#16501,1.);+#16501 = DIRECTION('',(1.,0.));+#16502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16503 = PCURVE('',#1975,#16504);+#16504 = DEFINITIONAL_REPRESENTATION('',(#16505),#16509);+#16505 = LINE('',#16506,#16507);+#16506 = CARTESIAN_POINT('',(-0.197850445948,-0.334781226424));+#16507 = VECTOR('',#16508,1.);+#16508 = DIRECTION('',(0.,1.));+#16509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16510 = ADVANCED_FACE('',(#16511),#16213,.F.);+#16511 = FACE_BOUND('',#16512,.F.);+#16512 = EDGE_LOOP('',(#16513,#16536,#16537,#16538));+#16513 = ORIENTED_EDGE('',*,*,#16514,.T.);+#16514 = EDGE_CURVE('',#16515,#16170,#16517,.T.);+#16515 = VERTEX_POINT('',#16516);+#16516 = CARTESIAN_POINT('',(-1.4,0.135,-5.551115123126E-17));+#16517 = SURFACE_CURVE('',#16518,(#16522,#16529),.PCURVE_S1.);+#16518 = LINE('',#16519,#16520);+#16519 = CARTESIAN_POINT('',(-1.4,0.135,-5.551115123126E-17));+#16520 = VECTOR('',#16521,1.);+#16521 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16522 = PCURVE('',#16213,#16523);+#16523 = DEFINITIONAL_REPRESENTATION('',(#16524),#16528);+#16524 = LINE('',#16525,#16526);+#16525 = CARTESIAN_POINT('',(0.,0.));+#16526 = VECTOR('',#16527,1.);+#16527 = DIRECTION('',(0.,-1.));+#16528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16529 = PCURVE('',#16185,#16530);+#16530 = DEFINITIONAL_REPRESENTATION('',(#16531),#16535);+#16531 = LINE('',#16532,#16533);+#16532 = CARTESIAN_POINT('',(0.160326429341,1.834515520086E-18));+#16533 = VECTOR('',#16534,1.);+#16534 = DIRECTION('',(0.,-1.));+#16535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16536 = ORIENTED_EDGE('',*,*,#16197,.T.);+#16537 = ORIENTED_EDGE('',*,*,#16465,.F.);+#16538 = ORIENTED_EDGE('',*,*,#16539,.F.);+#16539 = EDGE_CURVE('',#16515,#16466,#16540,.T.);+#16540 = SURFACE_CURVE('',#16541,(#16545,#16552),.PCURVE_S1.);+#16541 = LINE('',#16542,#16543);+#16542 = CARTESIAN_POINT('',(-1.4,0.135,-5.551115123126E-17));+#16543 = VECTOR('',#16544,1.);+#16544 = DIRECTION('',(0.,0.,1.));+#16545 = PCURVE('',#16213,#16546);+#16546 = DEFINITIONAL_REPRESENTATION('',(#16547),#16551);+#16547 = LINE('',#16548,#16549);+#16548 = CARTESIAN_POINT('',(0.,0.));+#16549 = VECTOR('',#16550,1.);+#16550 = DIRECTION('',(1.,0.));+#16551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16552 = PCURVE('',#1975,#16553);+#16553 = DEFINITIONAL_REPRESENTATION('',(#16554),#16558);+#16554 = LINE('',#16555,#16556);+#16555 = CARTESIAN_POINT('',(-0.347850445948,-0.334781226424));+#16556 = VECTOR('',#16557,1.);+#16557 = DIRECTION('',(1.,0.));+#16558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16559 = ADVANCED_FACE('',(#16560),#16185,.F.);+#16560 = FACE_BOUND('',#16561,.F.);+#16561 = EDGE_LOOP('',(#16562,#16585,#16586,#16587));+#16562 = ORIENTED_EDGE('',*,*,#16563,.T.);+#16563 = EDGE_CURVE('',#16564,#16141,#16566,.T.);+#16564 = VERTEX_POINT('',#16565);+#16565 = CARTESIAN_POINT('',(-1.239673570659,0.135,-5.551115123126E-17)+ );+#16566 = SURFACE_CURVE('',#16567,(#16571,#16578),.PCURVE_S1.);+#16567 = LINE('',#16568,#16569);+#16568 = CARTESIAN_POINT('',(-1.239673570659,0.135,-5.551115123126E-17)+ );+#16569 = VECTOR('',#16570,1.);+#16570 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16571 = PCURVE('',#16185,#16572);+#16572 = DEFINITIONAL_REPRESENTATION('',(#16573),#16577);+#16573 = LINE('',#16574,#16575);+#16574 = CARTESIAN_POINT('',(0.,0.));+#16575 = VECTOR('',#16576,1.);+#16576 = DIRECTION('',(0.,-1.));+#16577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16578 = PCURVE('',#16157,#16579);+#16579 = DEFINITIONAL_REPRESENTATION('',(#16580),#16584);+#16580 = LINE('',#16581,#16582);+#16581 = CARTESIAN_POINT('',(4.886921905584,0.));+#16582 = VECTOR('',#16583,1.);+#16583 = DIRECTION('',(0.,-1.));+#16584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16585 = ORIENTED_EDGE('',*,*,#16169,.T.);+#16586 = ORIENTED_EDGE('',*,*,#16514,.F.);+#16587 = ORIENTED_EDGE('',*,*,#16588,.F.);+#16588 = EDGE_CURVE('',#16564,#16515,#16589,.T.);+#16589 = SURFACE_CURVE('',#16590,(#16594,#16601),.PCURVE_S1.);+#16590 = LINE('',#16591,#16592);+#16591 = CARTESIAN_POINT('',(-1.239673570659,0.135,-5.551115123126E-17)+ );+#16592 = VECTOR('',#16593,1.);+#16593 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16594 = PCURVE('',#16185,#16595);+#16595 = DEFINITIONAL_REPRESENTATION('',(#16596),#16600);+#16596 = LINE('',#16597,#16598);+#16597 = CARTESIAN_POINT('',(0.,0.));+#16598 = VECTOR('',#16599,1.);+#16599 = DIRECTION('',(1.,0.));+#16600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16601 = PCURVE('',#1975,#16602);+#16602 = DEFINITIONAL_REPRESENTATION('',(#16603),#16607);+#16603 = LINE('',#16604,#16605);+#16604 = CARTESIAN_POINT('',(-0.347850445948,-0.174454797083));+#16605 = VECTOR('',#16606,1.);+#16606 = DIRECTION('',(0.,-1.));+#16607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16608 = ADVANCED_FACE('',(#16609),#16157,.T.);+#16609 = FACE_BOUND('',#16610,.T.);+#16610 = EDGE_LOOP('',(#16611,#16635,#16636,#16637));+#16611 = ORIENTED_EDGE('',*,*,#16612,.T.);+#16612 = EDGE_CURVE('',#16613,#16564,#16615,.T.);+#16613 = VERTEX_POINT('',#16614);+#16614 = CARTESIAN_POINT('',(-0.993471632406,0.135,0.206587955583));+#16615 = SURFACE_CURVE('',#16616,(#16621,#16628),.PCURVE_S1.);+#16616 = CIRCLE('',#16617,0.25);+#16617 = AXIS2_PLACEMENT_3D('',#16618,#16619,#16620);+#16618 = CARTESIAN_POINT('',(-1.239673570659,0.135,0.25));+#16619 = DIRECTION('',(1.144237745222E-17,1.,-3.851859888774E-34));+#16620 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#16621 = PCURVE('',#16157,#16622);+#16622 = DEFINITIONAL_REPRESENTATION('',(#16623),#16627);+#16623 = LINE('',#16624,#16625);+#16624 = CARTESIAN_POINT('',(6.28318530718,-2.775557561563E-17));+#16625 = VECTOR('',#16626,1.);+#16626 = DIRECTION('',(-1.,1.987846675915E-17));+#16627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16628 = PCURVE('',#1975,#16629);+#16629 = DEFINITIONAL_REPRESENTATION('',(#16630),#16634);+#16630 = CIRCLE('',#16631,0.25);+#16631 = AXIS2_PLACEMENT_2D('',#16632,#16633);+#16632 = CARTESIAN_POINT('',(-9.7850445948E-02,-0.174454797083));+#16633 = DIRECTION('',(-0.173648177667,0.984807753012));+#16634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16635 = ORIENTED_EDGE('',*,*,#16563,.T.);+#16636 = ORIENTED_EDGE('',*,*,#16140,.F.);+#16637 = ORIENTED_EDGE('',*,*,#16638,.F.);+#16638 = EDGE_CURVE('',#16613,#16113,#16639,.T.);+#16639 = SURFACE_CURVE('',#16640,(#16644,#16651),.PCURVE_S1.);+#16640 = LINE('',#16641,#16642);+#16641 = CARTESIAN_POINT('',(-0.993471632406,0.135,0.206587955583));+#16642 = VECTOR('',#16643,1.);+#16643 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16644 = PCURVE('',#16157,#16645);+#16645 = DEFINITIONAL_REPRESENTATION('',(#16646),#16650);+#16646 = LINE('',#16647,#16648);+#16647 = CARTESIAN_POINT('',(6.28318530718,-2.775557561563E-17));+#16648 = VECTOR('',#16649,1.);+#16649 = DIRECTION('',(0.,-1.));+#16650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16651 = PCURVE('',#16128,#16652);+#16652 = DEFINITIONAL_REPRESENTATION('',(#16653),#16657);+#16653 = LINE('',#16654,#16655);+#16654 = CARTESIAN_POINT('',(0.289296719965,5.14802368897E-19));+#16655 = VECTOR('',#16656,1.);+#16656 = DIRECTION('',(-4.926605106769E-30,-1.));+#16657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16658 = ADVANCED_FACE('',(#16659),#16128,.F.);+#16659 = FACE_BOUND('',#16660,.F.);+#16660 = EDGE_LOOP('',(#16661,#16684,#16685,#16686));+#16661 = ORIENTED_EDGE('',*,*,#16662,.T.);+#16662 = EDGE_CURVE('',#16663,#16080,#16665,.T.);+#16663 = VERTEX_POINT('',#16664);+#16664 = CARTESIAN_POINT('',(-0.948480775301,0.135,0.492364817767));+#16665 = SURFACE_CURVE('',#16666,(#16670,#16677),.PCURVE_S1.);+#16666 = LINE('',#16667,#16668);+#16667 = CARTESIAN_POINT('',(-0.948480775301,0.135,0.492364817767));+#16668 = VECTOR('',#16669,1.);+#16669 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16670 = PCURVE('',#16128,#16671);+#16671 = DEFINITIONAL_REPRESENTATION('',(#16672),#16676);+#16672 = LINE('',#16673,#16674);+#16673 = CARTESIAN_POINT('',(0.,0.));+#16674 = VECTOR('',#16675,1.);+#16675 = DIRECTION('',(-4.926605106769E-30,-1.));+#16676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16677 = PCURVE('',#16100,#16678);+#16678 = DEFINITIONAL_REPRESENTATION('',(#16679),#16683);+#16679 = LINE('',#16680,#16681);+#16680 = CARTESIAN_POINT('',(1.396263401592,0.));+#16681 = VECTOR('',#16682,1.);+#16682 = DIRECTION('',(0.,-1.));+#16683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16684 = ORIENTED_EDGE('',*,*,#16112,.T.);+#16685 = ORIENTED_EDGE('',*,*,#16638,.F.);+#16686 = ORIENTED_EDGE('',*,*,#16687,.F.);+#16687 = EDGE_CURVE('',#16663,#16613,#16688,.T.);+#16688 = SURFACE_CURVE('',#16689,(#16693,#16700),.PCURVE_S1.);+#16689 = LINE('',#16690,#16691);+#16690 = CARTESIAN_POINT('',(-0.948480775301,0.135,0.492364817767));+#16691 = VECTOR('',#16692,1.);+#16692 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#16693 = PCURVE('',#16128,#16694);+#16694 = DEFINITIONAL_REPRESENTATION('',(#16695),#16699);+#16695 = LINE('',#16696,#16697);+#16696 = CARTESIAN_POINT('',(0.,0.));+#16697 = VECTOR('',#16698,1.);+#16698 = DIRECTION('',(1.,-6.052038146458E-35));+#16699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16700 = PCURVE('',#1975,#16701);+#16701 = DEFINITIONAL_REPRESENTATION('',(#16702),#16706);+#16702 = LINE('',#16703,#16704);+#16703 = CARTESIAN_POINT('',(0.144514371819,0.116737998275));+#16704 = VECTOR('',#16705,1.);+#16705 = DIRECTION('',(-0.987833053268,-0.155518033909));+#16706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16707 = ADVANCED_FACE('',(#16708),#16100,.F.);+#16708 = FACE_BOUND('',#16709,.F.);+#16709 = EDGE_LOOP('',(#16710,#16733,#16734,#16735));+#16710 = ORIENTED_EDGE('',*,*,#16711,.T.);+#16711 = EDGE_CURVE('',#16712,#16057,#16714,.T.);+#16712 = VERTEX_POINT('',#16713);+#16713 = CARTESIAN_POINT('',(-0.85,0.135,0.575));+#16714 = SURFACE_CURVE('',#16715,(#16719,#16726),.PCURVE_S1.);+#16715 = LINE('',#16716,#16717);+#16716 = CARTESIAN_POINT('',(-0.85,0.135,0.575));+#16717 = VECTOR('',#16718,1.);+#16718 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16719 = PCURVE('',#16100,#16720);+#16720 = DEFINITIONAL_REPRESENTATION('',(#16721),#16725);+#16721 = LINE('',#16722,#16723);+#16722 = CARTESIAN_POINT('',(0.,0.));+#16723 = VECTOR('',#16724,1.);+#16724 = DIRECTION('',(0.,-1.));+#16725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16726 = PCURVE('',#362,#16727);+#16727 = DEFINITIONAL_REPRESENTATION('',(#16728),#16732);+#16728 = LINE('',#16729,#16730);+#16729 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));+#16730 = VECTOR('',#16731,1.);+#16731 = DIRECTION('',(0.,-1.));+#16732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16733 = ORIENTED_EDGE('',*,*,#16079,.T.);+#16734 = ORIENTED_EDGE('',*,*,#16662,.F.);+#16735 = ORIENTED_EDGE('',*,*,#16736,.F.);+#16736 = EDGE_CURVE('',#16712,#16663,#16737,.T.);+#16737 = SURFACE_CURVE('',#16738,(#16743,#16750),.PCURVE_S1.);+#16738 = CIRCLE('',#16739,0.1);+#16739 = AXIS2_PLACEMENT_3D('',#16740,#16741,#16742);+#16740 = CARTESIAN_POINT('',(-0.85,0.135,0.475));+#16741 = DIRECTION('',(-1.144237745222E-17,-1.,5.473822126269E-48));+#16742 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#16743 = PCURVE('',#16100,#16744);+#16744 = DEFINITIONAL_REPRESENTATION('',(#16745),#16749);+#16745 = LINE('',#16746,#16747);+#16746 = CARTESIAN_POINT('',(0.,0.));+#16747 = VECTOR('',#16748,1.);+#16748 = DIRECTION('',(1.,0.));+#16749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16750 = PCURVE('',#1975,#16751);+#16751 = DEFINITIONAL_REPRESENTATION('',(#16752),#16760);+#16752 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16753,#16754,#16755,#16756+ ,#16757,#16758,#16759),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16753 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#16754 = CARTESIAN_POINT('',(0.227149554052,4.201369281911E-02));+#16755 = CARTESIAN_POINT('',(7.7149554052E-02,0.128616233198));+#16756 = CARTESIAN_POINT('',(-7.2850445948E-02,0.215218773576));+#16757 = CARTESIAN_POINT('',(7.7149554052E-02,0.301821313954));+#16758 = CARTESIAN_POINT('',(0.227149554052,0.388423854333));+#16759 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#16760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16761 = ADVANCED_FACE('',(#16762),#2003,.T.);+#16762 = FACE_BOUND('',#16763,.T.);+#16763 = EDGE_LOOP('',(#16764,#16786,#16787,#16788));+#16764 = ORIENTED_EDGE('',*,*,#16765,.T.);+#16765 = EDGE_CURVE('',#16365,#1960,#16766,.T.);+#16766 = SURFACE_CURVE('',#16767,(#16772,#16779),.PCURVE_S1.);+#16767 = CIRCLE('',#16768,0.25);+#16768 = AXIS2_PLACEMENT_3D('',#16769,#16770,#16771);+#16769 = CARTESIAN_POINT('',(-0.85,0.135,0.475));+#16770 = DIRECTION('',(1.144237745222E-17,1.,1.54074395551E-33));+#16771 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#16772 = PCURVE('',#2003,#16773);+#16773 = DEFINITIONAL_REPRESENTATION('',(#16774),#16778);+#16774 = LINE('',#16775,#16776);+#16775 = CARTESIAN_POINT('',(6.28318530718,0.));+#16776 = VECTOR('',#16777,1.);+#16777 = DIRECTION('',(-1.,0.));+#16778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16779 = PCURVE('',#1975,#16780);+#16780 = DEFINITIONAL_REPRESENTATION('',(#16781),#16785);+#16781 = CIRCLE('',#16782,0.25);+#16782 = AXIS2_PLACEMENT_2D('',#16783,#16784);+#16783 = CARTESIAN_POINT('',(0.127149554052,0.215218773576));+#16784 = DIRECTION('',(0.173648177667,-0.984807753012));+#16785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16786 = ORIENTED_EDGE('',*,*,#1987,.T.);+#16787 = ORIENTED_EDGE('',*,*,#16314,.F.);+#16788 = ORIENTED_EDGE('',*,*,#16364,.F.);+#16789 = ADVANCED_FACE('',(#16790),#1975,.F.);+#16790 = FACE_BOUND('',#16791,.F.);+#16791 = EDGE_LOOP('',(#16792,#16813,#16834,#16835,#16836,#16837,#16838,+ #16839,#16840,#16841,#16842,#16843));+#16792 = ORIENTED_EDGE('',*,*,#16793,.F.);+#16793 = EDGE_CURVE('',#347,#1937,#16794,.T.);+#16794 = SURFACE_CURVE('',#16795,(#16799,#16806),.PCURVE_S1.);+#16795 = LINE('',#16796,#16797);+#16796 = CARTESIAN_POINT('',(-0.8,0.135,0.536425222974));+#16797 = VECTOR('',#16798,1.);+#16798 = DIRECTION('',(0.,0.,1.));+#16799 = PCURVE('',#1975,#16800);+#16800 = DEFINITIONAL_REPRESENTATION('',(#16801),#16805);+#16801 = LINE('',#16802,#16803);+#16802 = CARTESIAN_POINT('',(0.188574777026,0.265218773576));+#16803 = VECTOR('',#16804,1.);+#16804 = DIRECTION('',(1.,0.));+#16805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16806 = PCURVE('',#390,#16807);+#16807 = DEFINITIONAL_REPRESENTATION('',(#16808),#16812);+#16808 = LINE('',#16809,#16810);+#16809 = CARTESIAN_POINT('',(1.49,-0.188574777026));+#16810 = VECTOR('',#16811,1.);+#16811 = DIRECTION('',(0.,1.));+#16812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16813 = ORIENTED_EDGE('',*,*,#16814,.T.);+#16814 = EDGE_CURVE('',#347,#16712,#16815,.T.);+#16815 = SURFACE_CURVE('',#16816,(#16820,#16827),.PCURVE_S1.);+#16816 = LINE('',#16817,#16818);+#16817 = CARTESIAN_POINT('',(-0.75,0.135,0.575));+#16818 = VECTOR('',#16819,1.);+#16819 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16820 = PCURVE('',#1975,#16821);+#16821 = DEFINITIONAL_REPRESENTATION('',(#16822),#16826);+#16822 = LINE('',#16823,#16824);+#16823 = CARTESIAN_POINT('',(0.227149554052,0.315218773576));+#16824 = VECTOR('',#16825,1.);+#16825 = DIRECTION('',(0.,-1.));+#16826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16827 = PCURVE('',#362,#16828);+#16828 = DEFINITIONAL_REPRESENTATION('',(#16829),#16833);+#16829 = LINE('',#16830,#16831);+#16830 = CARTESIAN_POINT('',(0.,0.));+#16831 = VECTOR('',#16832,1.);+#16832 = DIRECTION('',(1.,0.));+#16833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16834 = ORIENTED_EDGE('',*,*,#16736,.T.);+#16835 = ORIENTED_EDGE('',*,*,#16687,.T.);+#16836 = ORIENTED_EDGE('',*,*,#16612,.T.);+#16837 = ORIENTED_EDGE('',*,*,#16588,.T.);+#16838 = ORIENTED_EDGE('',*,*,#16539,.T.);+#16839 = ORIENTED_EDGE('',*,*,#16490,.T.);+#16840 = ORIENTED_EDGE('',*,*,#16436,.T.);+#16841 = ORIENTED_EDGE('',*,*,#16387,.T.);+#16842 = ORIENTED_EDGE('',*,*,#16765,.T.);+#16843 = ORIENTED_EDGE('',*,*,#1959,.T.);+#16844 = ADVANCED_FACE('',(#16845),#1924,.T.);+#16845 = FACE_BOUND('',#16846,.T.);+#16846 = EDGE_LOOP('',(#16847,#16868,#16891,#16924,#16952,#16981,#17009,+ #17037,#17065,#17098,#17126,#17148));+#16847 = ORIENTED_EDGE('',*,*,#16848,.F.);+#16848 = EDGE_CURVE('',#375,#1909,#16849,.T.);+#16849 = SURFACE_CURVE('',#16850,(#16854,#16861),.PCURVE_S1.);+#16850 = LINE('',#16851,#16852);+#16851 = CARTESIAN_POINT('',(-0.8,-0.135,0.536425222974));+#16852 = VECTOR('',#16853,1.);+#16853 = DIRECTION('',(0.,0.,1.));+#16854 = PCURVE('',#1924,#16855);+#16855 = DEFINITIONAL_REPRESENTATION('',(#16856),#16860);+#16856 = LINE('',#16857,#16858);+#16857 = CARTESIAN_POINT('',(0.188574777026,0.265218773576));+#16858 = VECTOR('',#16859,1.);+#16859 = DIRECTION('',(1.,0.));+#16860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16861 = PCURVE('',#390,#16862);+#16862 = DEFINITIONAL_REPRESENTATION('',(#16863),#16867);+#16863 = LINE('',#16864,#16865);+#16864 = CARTESIAN_POINT('',(1.22,-0.188574777026));+#16865 = VECTOR('',#16866,1.);+#16866 = DIRECTION('',(0.,1.));+#16867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16868 = ORIENTED_EDGE('',*,*,#16869,.T.);+#16869 = EDGE_CURVE('',#375,#16870,#16872,.T.);+#16870 = VERTEX_POINT('',#16871);+#16871 = CARTESIAN_POINT('',(-0.85,-0.135,0.575));+#16872 = SURFACE_CURVE('',#16873,(#16877,#16884),.PCURVE_S1.);+#16873 = LINE('',#16874,#16875);+#16874 = CARTESIAN_POINT('',(-0.75,-0.135,0.575));+#16875 = VECTOR('',#16876,1.);+#16876 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16877 = PCURVE('',#1924,#16878);+#16878 = DEFINITIONAL_REPRESENTATION('',(#16879),#16883);+#16879 = LINE('',#16880,#16881);+#16880 = CARTESIAN_POINT('',(0.227149554052,0.315218773576));+#16881 = VECTOR('',#16882,1.);+#16882 = DIRECTION('',(0.,-1.));+#16883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16884 = PCURVE('',#418,#16885);+#16885 = DEFINITIONAL_REPRESENTATION('',(#16886),#16890);+#16886 = LINE('',#16887,#16888);+#16887 = CARTESIAN_POINT('',(4.348103431844E-18,-0.38));+#16888 = VECTOR('',#16889,1.);+#16889 = DIRECTION('',(1.,0.));+#16890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16891 = ORIENTED_EDGE('',*,*,#16892,.T.);+#16892 = EDGE_CURVE('',#16870,#16893,#16895,.T.);+#16893 = VERTEX_POINT('',#16894);+#16894 = CARTESIAN_POINT('',(-0.948480775301,-0.135,0.492364817767));+#16895 = SURFACE_CURVE('',#16896,(#16901,#16912),.PCURVE_S1.);+#16896 = CIRCLE('',#16897,0.1);+#16897 = AXIS2_PLACEMENT_3D('',#16898,#16899,#16900);+#16898 = CARTESIAN_POINT('',(-0.85,-0.135,0.475));+#16899 = DIRECTION('',(-1.144237745222E-17,-1.,5.473822126269E-48));+#16900 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#16901 = PCURVE('',#1924,#16902);+#16902 = DEFINITIONAL_REPRESENTATION('',(#16903),#16911);+#16903 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16904,#16905,#16906,#16907+ ,#16908,#16909,#16910),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16904 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#16905 = CARTESIAN_POINT('',(0.227149554052,4.201369281911E-02));+#16906 = CARTESIAN_POINT('',(7.7149554052E-02,0.128616233198));+#16907 = CARTESIAN_POINT('',(-7.2850445948E-02,0.215218773576));+#16908 = CARTESIAN_POINT('',(7.7149554052E-02,0.301821313954));+#16909 = CARTESIAN_POINT('',(0.227149554052,0.388423854333));+#16910 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#16911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16912 = PCURVE('',#16913,#16918);+#16913 = CYLINDRICAL_SURFACE('',#16914,0.1);+#16914 = AXIS2_PLACEMENT_3D('',#16915,#16916,#16917);+#16915 = CARTESIAN_POINT('',(-0.85,-0.515,0.475));+#16916 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16917 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#16918 = DEFINITIONAL_REPRESENTATION('',(#16919),#16923);+#16919 = LINE('',#16920,#16921);+#16920 = CARTESIAN_POINT('',(0.,-0.38));+#16921 = VECTOR('',#16922,1.);+#16922 = DIRECTION('',(1.,0.));+#16923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16924 = ORIENTED_EDGE('',*,*,#16925,.T.);+#16925 = EDGE_CURVE('',#16893,#16926,#16928,.T.);+#16926 = VERTEX_POINT('',#16927);+#16927 = CARTESIAN_POINT('',(-0.993471632406,-0.135,0.206587955583));+#16928 = SURFACE_CURVE('',#16929,(#16933,#16940),.PCURVE_S1.);+#16929 = LINE('',#16930,#16931);+#16930 = CARTESIAN_POINT('',(-0.948480775301,-0.135,0.492364817767));+#16931 = VECTOR('',#16932,1.);+#16932 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#16933 = PCURVE('',#1924,#16934);+#16934 = DEFINITIONAL_REPRESENTATION('',(#16935),#16939);+#16935 = LINE('',#16936,#16937);+#16936 = CARTESIAN_POINT('',(0.144514371819,0.116737998275));+#16937 = VECTOR('',#16938,1.);+#16938 = DIRECTION('',(-0.987833053268,-0.155518033909));+#16939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16940 = PCURVE('',#16941,#16946);+#16941 = PLANE('',#16942);+#16942 = AXIS2_PLACEMENT_3D('',#16943,#16944,#16945);+#16943 = CARTESIAN_POINT('',(-0.948480775301,-0.515,0.492364817767));+#16944 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909+ ));+#16945 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#16946 = DEFINITIONAL_REPRESENTATION('',(#16947),#16951);+#16947 = LINE('',#16948,#16949);+#16948 = CARTESIAN_POINT('',(6.762084969515E-19,-0.38));+#16949 = VECTOR('',#16950,1.);+#16950 = DIRECTION('',(1.,-6.052038146458E-35));+#16951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16952 = ORIENTED_EDGE('',*,*,#16953,.T.);+#16953 = EDGE_CURVE('',#16926,#16954,#16956,.T.);+#16954 = VERTEX_POINT('',#16955);+#16955 = CARTESIAN_POINT('',(-1.239673570659,-0.135,-5.551115123126E-17)+ );+#16956 = SURFACE_CURVE('',#16957,(#16962,#16969),.PCURVE_S1.);+#16957 = CIRCLE('',#16958,0.25);+#16958 = AXIS2_PLACEMENT_3D('',#16959,#16960,#16961);+#16959 = CARTESIAN_POINT('',(-1.239673570659,-0.135,0.25));+#16960 = DIRECTION('',(1.144237745222E-17,1.,-3.851859888774E-34));+#16961 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#16962 = PCURVE('',#1924,#16963);+#16963 = DEFINITIONAL_REPRESENTATION('',(#16964),#16968);+#16964 = CIRCLE('',#16965,0.25);+#16965 = AXIS2_PLACEMENT_2D('',#16966,#16967);+#16966 = CARTESIAN_POINT('',(-9.7850445948E-02,-0.174454797083));+#16967 = DIRECTION('',(-0.173648177667,0.984807753012));+#16968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16969 = PCURVE('',#16970,#16975);+#16970 = CYLINDRICAL_SURFACE('',#16971,0.25);+#16971 = AXIS2_PLACEMENT_3D('',#16972,#16973,#16974);+#16972 = CARTESIAN_POINT('',(-1.239673570659,-0.515,0.25));+#16973 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16974 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#16975 = DEFINITIONAL_REPRESENTATION('',(#16976),#16980);+#16976 = LINE('',#16977,#16978);+#16977 = CARTESIAN_POINT('',(6.28318530718,-0.38));+#16978 = VECTOR('',#16979,1.);+#16979 = DIRECTION('',(-1.,0.));+#16980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16981 = ORIENTED_EDGE('',*,*,#16982,.T.);+#16982 = EDGE_CURVE('',#16954,#16983,#16985,.T.);+#16983 = VERTEX_POINT('',#16984);+#16984 = CARTESIAN_POINT('',(-1.4,-0.135,-5.551115123126E-17));+#16985 = SURFACE_CURVE('',#16986,(#16990,#16997),.PCURVE_S1.);+#16986 = LINE('',#16987,#16988);+#16987 = CARTESIAN_POINT('',(-1.239673570659,-0.135,-5.551115123126E-17)+ );+#16988 = VECTOR('',#16989,1.);+#16989 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16990 = PCURVE('',#1924,#16991);+#16991 = DEFINITIONAL_REPRESENTATION('',(#16992),#16996);+#16992 = LINE('',#16993,#16994);+#16993 = CARTESIAN_POINT('',(-0.347850445948,-0.174454797083));+#16994 = VECTOR('',#16995,1.);+#16995 = DIRECTION('',(0.,-1.));+#16996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16997 = PCURVE('',#16998,#17003);+#16998 = PLANE('',#16999);+#16999 = AXIS2_PLACEMENT_3D('',#17000,#17001,#17002);+#17000 = CARTESIAN_POINT('',(-1.239673570659,-0.515,-5.551115123126E-17)+ );+#17001 = DIRECTION('',(0.,0.,1.));+#17002 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#17003 = DEFINITIONAL_REPRESENTATION('',(#17004),#17008);+#17004 = LINE('',#17005,#17006);+#17005 = CARTESIAN_POINT('',(4.348103431844E-18,-0.38));+#17006 = VECTOR('',#17007,1.);+#17007 = DIRECTION('',(1.,0.));+#17008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17009 = ORIENTED_EDGE('',*,*,#17010,.T.);+#17010 = EDGE_CURVE('',#16983,#17011,#17013,.T.);+#17011 = VERTEX_POINT('',#17012);+#17012 = CARTESIAN_POINT('',(-1.4,-0.135,0.15));+#17013 = SURFACE_CURVE('',#17014,(#17018,#17025),.PCURVE_S1.);+#17014 = LINE('',#17015,#17016);+#17015 = CARTESIAN_POINT('',(-1.4,-0.135,-5.551115123126E-17));+#17016 = VECTOR('',#17017,1.);+#17017 = DIRECTION('',(0.,0.,1.));+#17018 = PCURVE('',#1924,#17019);+#17019 = DEFINITIONAL_REPRESENTATION('',(#17020),#17024);+#17020 = LINE('',#17021,#17022);+#17021 = CARTESIAN_POINT('',(-0.347850445948,-0.334781226424));+#17022 = VECTOR('',#17023,1.);+#17023 = DIRECTION('',(1.,0.));+#17024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17025 = PCURVE('',#17026,#17031);+#17026 = PLANE('',#17027);+#17027 = AXIS2_PLACEMENT_3D('',#17028,#17029,#17030);+#17028 = CARTESIAN_POINT('',(-1.4,-0.515,-5.551115123126E-17));+#17029 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#17030 = DIRECTION('',(0.,0.,1.));+#17031 = DEFINITIONAL_REPRESENTATION('',(#17032),#17036);+#17032 = LINE('',#17033,#17034);+#17033 = CARTESIAN_POINT('',(0.,-0.38));+#17034 = VECTOR('',#17035,1.);+#17035 = DIRECTION('',(1.,0.));+#17036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17037 = ORIENTED_EDGE('',*,*,#17038,.T.);+#17038 = EDGE_CURVE('',#17011,#17039,#17041,.T.);+#17039 = VERTEX_POINT('',#17040);+#17040 = CARTESIAN_POINT('',(-1.239673570659,-0.135,0.15));+#17041 = SURFACE_CURVE('',#17042,(#17046,#17053),.PCURVE_S1.);+#17042 = LINE('',#17043,#17044);+#17043 = CARTESIAN_POINT('',(-1.4,-0.135,0.15));+#17044 = VECTOR('',#17045,1.);+#17045 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#17046 = PCURVE('',#1924,#17047);+#17047 = DEFINITIONAL_REPRESENTATION('',(#17048),#17052);+#17048 = LINE('',#17049,#17050);+#17049 = CARTESIAN_POINT('',(-0.197850445948,-0.334781226424));+#17050 = VECTOR('',#17051,1.);+#17051 = DIRECTION('',(0.,1.));+#17052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17053 = PCURVE('',#17054,#17059);+#17054 = PLANE('',#17055);+#17055 = AXIS2_PLACEMENT_3D('',#17056,#17057,#17058);+#17056 = CARTESIAN_POINT('',(-1.4,-0.515,0.15));+#17057 = DIRECTION('',(0.,0.,-1.));+#17058 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#17059 = DEFINITIONAL_REPRESENTATION('',(#17060),#17064);+#17060 = LINE('',#17061,#17062);+#17061 = CARTESIAN_POINT('',(-4.348103431844E-18,-0.38));+#17062 = VECTOR('',#17063,1.);+#17063 = DIRECTION('',(1.,0.));+#17064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17065 = ORIENTED_EDGE('',*,*,#17066,.T.);+#17066 = EDGE_CURVE('',#17039,#17067,#17069,.T.);+#17067 = VERTEX_POINT('',#17068);+#17068 = CARTESIAN_POINT('',(-1.141192795358,-0.135,0.232635182233));+#17069 = SURFACE_CURVE('',#17070,(#17075,#17086),.PCURVE_S1.);+#17070 = CIRCLE('',#17071,0.1);+#17071 = AXIS2_PLACEMENT_3D('',#17072,#17073,#17074);+#17072 = CARTESIAN_POINT('',(-1.239673570659,-0.135,0.25));+#17073 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#17074 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#17075 = PCURVE('',#1924,#17076);+#17076 = DEFINITIONAL_REPRESENTATION('',(#17077),#17085);+#17077 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17078,#17079,#17080,#17081+ ,#17082,#17083,#17084),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17078 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#17079 = CARTESIAN_POINT('',(-0.197850445948,-1.249716326112E-03));+#17080 = CARTESIAN_POINT('',(-4.7850445948E-02,-8.785225670456E-02));+#17081 = CARTESIAN_POINT('',(0.102149554052,-0.174454797083));+#17082 = CARTESIAN_POINT('',(-4.7850445948E-02,-0.261057337461));+#17083 = CARTESIAN_POINT('',(-0.197850445948,-0.34765987784));+#17084 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#17085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17086 = PCURVE('',#17087,#17092);+#17087 = CYLINDRICAL_SURFACE('',#17088,0.1);+#17088 = AXIS2_PLACEMENT_3D('',#17089,#17090,#17091);+#17089 = CARTESIAN_POINT('',(-1.239673570659,-0.515,0.25));+#17090 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#17091 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#17092 = DEFINITIONAL_REPRESENTATION('',(#17093),#17097);+#17093 = LINE('',#17094,#17095);+#17094 = CARTESIAN_POINT('',(0.,-0.38));+#17095 = VECTOR('',#17096,1.);+#17096 = DIRECTION('',(1.,0.));+#17097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17098 = ORIENTED_EDGE('',*,*,#17099,.T.);+#17099 = EDGE_CURVE('',#17067,#17100,#17102,.T.);+#17100 = VERTEX_POINT('',#17101);+#17101 = CARTESIAN_POINT('',(-1.096201938253,-0.135,0.518412044417));+#17102 = SURFACE_CURVE('',#17103,(#17107,#17114),.PCURVE_S1.);+#17103 = LINE('',#17104,#17105);+#17104 = CARTESIAN_POINT('',(-1.141192795358,-0.135,0.232635182233));+#17105 = VECTOR('',#17106,1.);+#17106 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#17107 = PCURVE('',#1924,#17108);+#17108 = DEFINITIONAL_REPRESENTATION('',(#17109),#17113);+#17109 = LINE('',#17110,#17111);+#17110 = CARTESIAN_POINT('',(-0.115215263715,-7.5974021782E-02));+#17111 = VECTOR('',#17112,1.);+#17112 = DIRECTION('',(0.987833053268,0.155518033909));+#17113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17114 = PCURVE('',#17115,#17120);+#17115 = PLANE('',#17116);+#17116 = AXIS2_PLACEMENT_3D('',#17117,#17118,#17119);+#17117 = CARTESIAN_POINT('',(-1.141192795358,-0.515,0.232635182233));+#17118 = DIRECTION('',(0.987833053268,-1.130315865527E-17,+ -0.155518033909));+#17119 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#17120 = DEFINITIONAL_REPRESENTATION('',(#17121),#17125);+#17121 = LINE('',#17122,#17123);+#17122 = CARTESIAN_POINT('',(-6.762084969515E-19,-0.38));+#17123 = VECTOR('',#17124,1.);+#17124 = DIRECTION('',(1.,6.052038146458E-35));+#17125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17126 = ORIENTED_EDGE('',*,*,#17127,.T.);+#17127 = EDGE_CURVE('',#17100,#1881,#17128,.T.);+#17128 = SURFACE_CURVE('',#17129,(#17134,#17141),.PCURVE_S1.);+#17129 = CIRCLE('',#17130,0.25);+#17130 = AXIS2_PLACEMENT_3D('',#17131,#17132,#17133);+#17131 = CARTESIAN_POINT('',(-0.85,-0.135,0.475));+#17132 = DIRECTION('',(1.144237745222E-17,1.,1.54074395551E-33));+#17133 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#17134 = PCURVE('',#1924,#17135);+#17135 = DEFINITIONAL_REPRESENTATION('',(#17136),#17140);+#17136 = CIRCLE('',#17137,0.25);+#17137 = AXIS2_PLACEMENT_2D('',#17138,#17139);+#17138 = CARTESIAN_POINT('',(0.127149554052,0.215218773576));+#17139 = DIRECTION('',(0.173648177667,-0.984807753012));+#17140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17141 = PCURVE('',#1896,#17142);+#17142 = DEFINITIONAL_REPRESENTATION('',(#17143),#17147);+#17143 = LINE('',#17144,#17145);+#17144 = CARTESIAN_POINT('',(6.28318530718,-0.38));+#17145 = VECTOR('',#17146,1.);+#17146 = DIRECTION('',(-1.,0.));+#17147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17148 = ORIENTED_EDGE('',*,*,#1908,.T.);+#17149 = ADVANCED_FACE('',(#17150),#17115,.F.);+#17150 = FACE_BOUND('',#17151,.F.);+#17151 = EDGE_LOOP('',(#17152,#17175,#17176,#17199));+#17152 = ORIENTED_EDGE('',*,*,#17153,.T.);+#17153 = EDGE_CURVE('',#17154,#17067,#17156,.T.);+#17154 = VERTEX_POINT('',#17155);+#17155 = CARTESIAN_POINT('',(-1.141192795358,-0.515,0.232635182233));+#17156 = SURFACE_CURVE('',#17157,(#17161,#17168),.PCURVE_S1.);+#17157 = LINE('',#17158,#17159);+#17158 = CARTESIAN_POINT('',(-1.141192795358,-0.515,0.232635182233));+#17159 = VECTOR('',#17160,1.);+#17160 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17161 = PCURVE('',#17115,#17162);+#17162 = DEFINITIONAL_REPRESENTATION('',(#17163),#17167);+#17163 = LINE('',#17164,#17165);+#17164 = CARTESIAN_POINT('',(0.,0.));+#17165 = VECTOR('',#17166,1.);+#17166 = DIRECTION('',(4.926605106769E-30,-1.));+#17167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17168 = PCURVE('',#17087,#17169);+#17169 = DEFINITIONAL_REPRESENTATION('',(#17170),#17174);+#17170 = LINE('',#17171,#17172);+#17171 = CARTESIAN_POINT('',(1.396263401592,0.));+#17172 = VECTOR('',#17173,1.);+#17173 = DIRECTION('',(0.,-1.));+#17174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17175 = ORIENTED_EDGE('',*,*,#17099,.T.);+#17176 = ORIENTED_EDGE('',*,*,#17177,.F.);+#17177 = EDGE_CURVE('',#17178,#17100,#17180,.T.);+#17178 = VERTEX_POINT('',#17179);+#17179 = CARTESIAN_POINT('',(-1.096201938253,-0.515,0.518412044417));+#17180 = SURFACE_CURVE('',#17181,(#17185,#17192),.PCURVE_S1.);+#17181 = LINE('',#17182,#17183);+#17182 = CARTESIAN_POINT('',(-1.096201938253,-0.515,0.518412044417));+#17183 = VECTOR('',#17184,1.);+#17184 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17185 = PCURVE('',#17115,#17186);+#17186 = DEFINITIONAL_REPRESENTATION('',(#17187),#17191);+#17187 = LINE('',#17188,#17189);+#17188 = CARTESIAN_POINT('',(0.289296719965,-5.14802368897E-19));+#17189 = VECTOR('',#17190,1.);+#17190 = DIRECTION('',(4.926605106769E-30,-1.));+#17191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17192 = PCURVE('',#1896,#17193);+#17193 = DEFINITIONAL_REPRESENTATION('',(#17194),#17198);+#17194 = LINE('',#17195,#17196);+#17195 = CARTESIAN_POINT('',(6.28318530718,0.));+#17196 = VECTOR('',#17197,1.);+#17197 = DIRECTION('',(0.,-1.));+#17198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17199 = ORIENTED_EDGE('',*,*,#17200,.F.);+#17200 = EDGE_CURVE('',#17154,#17178,#17201,.T.);+#17201 = SURFACE_CURVE('',#17202,(#17206,#17213),.PCURVE_S1.);+#17202 = LINE('',#17203,#17204);+#17203 = CARTESIAN_POINT('',(-1.141192795358,-0.515,0.232635182233));+#17204 = VECTOR('',#17205,1.);+#17205 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268+ ));+#17206 = PCURVE('',#17115,#17207);+#17207 = DEFINITIONAL_REPRESENTATION('',(#17208),#17212);+#17208 = LINE('',#17209,#17210);+#17209 = CARTESIAN_POINT('',(0.,0.));+#17210 = VECTOR('',#17211,1.);+#17211 = DIRECTION('',(1.,6.052038146458E-35));+#17212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17213 = PCURVE('',#1868,#17214);+#17214 = DEFINITIONAL_REPRESENTATION('',(#17215),#17219);+#17215 = LINE('',#17216,#17217);+#17216 = CARTESIAN_POINT('',(-0.115215263715,-7.5974021782E-02));+#17217 = VECTOR('',#17218,1.);+#17218 = DIRECTION('',(0.987833053268,0.155518033909));+#17219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17220 = ADVANCED_FACE('',(#17221),#17087,.F.);+#17221 = FACE_BOUND('',#17222,.F.);+#17222 = EDGE_LOOP('',(#17223,#17246,#17247,#17248));+#17223 = ORIENTED_EDGE('',*,*,#17224,.T.);+#17224 = EDGE_CURVE('',#17225,#17039,#17227,.T.);+#17225 = VERTEX_POINT('',#17226);+#17226 = CARTESIAN_POINT('',(-1.239673570659,-0.515,0.15));+#17227 = SURFACE_CURVE('',#17228,(#17232,#17239),.PCURVE_S1.);+#17228 = LINE('',#17229,#17230);+#17229 = CARTESIAN_POINT('',(-1.239673570659,-0.515,0.15));+#17230 = VECTOR('',#17231,1.);+#17231 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17232 = PCURVE('',#17087,#17233);+#17233 = DEFINITIONAL_REPRESENTATION('',(#17234),#17238);+#17234 = LINE('',#17235,#17236);+#17235 = CARTESIAN_POINT('',(0.,0.));+#17236 = VECTOR('',#17237,1.);+#17237 = DIRECTION('',(0.,-1.));+#17238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17239 = PCURVE('',#17054,#17240);+#17240 = DEFINITIONAL_REPRESENTATION('',(#17241),#17245);+#17241 = LINE('',#17242,#17243);+#17242 = CARTESIAN_POINT('',(0.160326429341,-1.834515520086E-18));+#17243 = VECTOR('',#17244,1.);+#17244 = DIRECTION('',(0.,-1.));+#17245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17246 = ORIENTED_EDGE('',*,*,#17066,.T.);+#17247 = ORIENTED_EDGE('',*,*,#17153,.F.);+#17248 = ORIENTED_EDGE('',*,*,#17249,.F.);+#17249 = EDGE_CURVE('',#17225,#17154,#17250,.T.);+#17250 = SURFACE_CURVE('',#17251,(#17256,#17263),.PCURVE_S1.);+#17251 = CIRCLE('',#17252,0.1);+#17252 = AXIS2_PLACEMENT_3D('',#17253,#17254,#17255);+#17253 = CARTESIAN_POINT('',(-1.239673570659,-0.515,0.25));+#17254 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#17255 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,-1.));+#17256 = PCURVE('',#17087,#17257);+#17257 = DEFINITIONAL_REPRESENTATION('',(#17258),#17262);+#17258 = LINE('',#17259,#17260);+#17259 = CARTESIAN_POINT('',(0.,0.));+#17260 = VECTOR('',#17261,1.);+#17261 = DIRECTION('',(1.,0.));+#17262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17263 = PCURVE('',#1868,#17264);+#17264 = DEFINITIONAL_REPRESENTATION('',(#17265),#17273);+#17265 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17266,#17267,#17268,#17269+ ,#17270,#17271,#17272),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17266 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#17267 = CARTESIAN_POINT('',(-0.197850445948,-1.249716326112E-03));+#17268 = CARTESIAN_POINT('',(-4.7850445948E-02,-8.785225670456E-02));+#17269 = CARTESIAN_POINT('',(0.102149554052,-0.174454797083));+#17270 = CARTESIAN_POINT('',(-4.7850445948E-02,-0.261057337461));+#17271 = CARTESIAN_POINT('',(-0.197850445948,-0.34765987784));+#17272 = CARTESIAN_POINT('',(-0.197850445948,-0.174454797083));+#17273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17274 = ADVANCED_FACE('',(#17275),#17054,.F.);+#17275 = FACE_BOUND('',#17276,.F.);+#17276 = EDGE_LOOP('',(#17277,#17300,#17301,#17302));+#17277 = ORIENTED_EDGE('',*,*,#17278,.T.);+#17278 = EDGE_CURVE('',#17279,#17011,#17281,.T.);+#17279 = VERTEX_POINT('',#17280);+#17280 = CARTESIAN_POINT('',(-1.4,-0.515,0.15));+#17281 = SURFACE_CURVE('',#17282,(#17286,#17293),.PCURVE_S1.);+#17282 = LINE('',#17283,#17284);+#17283 = CARTESIAN_POINT('',(-1.4,-0.515,0.15));+#17284 = VECTOR('',#17285,1.);+#17285 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17286 = PCURVE('',#17054,#17287);+#17287 = DEFINITIONAL_REPRESENTATION('',(#17288),#17292);+#17288 = LINE('',#17289,#17290);+#17289 = CARTESIAN_POINT('',(0.,-0.));+#17290 = VECTOR('',#17291,1.);+#17291 = DIRECTION('',(0.,-1.));+#17292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17293 = PCURVE('',#17026,#17294);+#17294 = DEFINITIONAL_REPRESENTATION('',(#17295),#17299);+#17295 = LINE('',#17296,#17297);+#17296 = CARTESIAN_POINT('',(0.15,0.));+#17297 = VECTOR('',#17298,1.);+#17298 = DIRECTION('',(0.,-1.));+#17299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17300 = ORIENTED_EDGE('',*,*,#17038,.T.);+#17301 = ORIENTED_EDGE('',*,*,#17224,.F.);+#17302 = ORIENTED_EDGE('',*,*,#17303,.F.);+#17303 = EDGE_CURVE('',#17279,#17225,#17304,.T.);+#17304 = SURFACE_CURVE('',#17305,(#17309,#17316),.PCURVE_S1.);+#17305 = LINE('',#17306,#17307);+#17306 = CARTESIAN_POINT('',(-1.4,-0.515,0.15));+#17307 = VECTOR('',#17308,1.);+#17308 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#17309 = PCURVE('',#17054,#17310);+#17310 = DEFINITIONAL_REPRESENTATION('',(#17311),#17315);+#17311 = LINE('',#17312,#17313);+#17312 = CARTESIAN_POINT('',(0.,-0.));+#17313 = VECTOR('',#17314,1.);+#17314 = DIRECTION('',(1.,0.));+#17315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17316 = PCURVE('',#1868,#17317);+#17317 = DEFINITIONAL_REPRESENTATION('',(#17318),#17322);+#17318 = LINE('',#17319,#17320);+#17319 = CARTESIAN_POINT('',(-0.197850445948,-0.334781226424));+#17320 = VECTOR('',#17321,1.);+#17321 = DIRECTION('',(0.,1.));+#17322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17323 = ADVANCED_FACE('',(#17324),#17026,.F.);+#17324 = FACE_BOUND('',#17325,.F.);+#17325 = EDGE_LOOP('',(#17326,#17349,#17350,#17351));+#17326 = ORIENTED_EDGE('',*,*,#17327,.T.);+#17327 = EDGE_CURVE('',#17328,#16983,#17330,.T.);+#17328 = VERTEX_POINT('',#17329);+#17329 = CARTESIAN_POINT('',(-1.4,-0.515,-5.551115123126E-17));+#17330 = SURFACE_CURVE('',#17331,(#17335,#17342),.PCURVE_S1.);+#17331 = LINE('',#17332,#17333);+#17332 = CARTESIAN_POINT('',(-1.4,-0.515,-5.551115123126E-17));+#17333 = VECTOR('',#17334,1.);+#17334 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17335 = PCURVE('',#17026,#17336);+#17336 = DEFINITIONAL_REPRESENTATION('',(#17337),#17341);+#17337 = LINE('',#17338,#17339);+#17338 = CARTESIAN_POINT('',(0.,0.));+#17339 = VECTOR('',#17340,1.);+#17340 = DIRECTION('',(0.,-1.));+#17341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17342 = PCURVE('',#16998,#17343);+#17343 = DEFINITIONAL_REPRESENTATION('',(#17344),#17348);+#17344 = LINE('',#17345,#17346);+#17345 = CARTESIAN_POINT('',(0.160326429341,1.834515520086E-18));+#17346 = VECTOR('',#17347,1.);+#17347 = DIRECTION('',(0.,-1.));+#17348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17349 = ORIENTED_EDGE('',*,*,#17010,.T.);+#17350 = ORIENTED_EDGE('',*,*,#17278,.F.);+#17351 = ORIENTED_EDGE('',*,*,#17352,.F.);+#17352 = EDGE_CURVE('',#17328,#17279,#17353,.T.);+#17353 = SURFACE_CURVE('',#17354,(#17358,#17365),.PCURVE_S1.);+#17354 = LINE('',#17355,#17356);+#17355 = CARTESIAN_POINT('',(-1.4,-0.515,-5.551115123126E-17));+#17356 = VECTOR('',#17357,1.);+#17357 = DIRECTION('',(0.,0.,1.));+#17358 = PCURVE('',#17026,#17359);+#17359 = DEFINITIONAL_REPRESENTATION('',(#17360),#17364);+#17360 = LINE('',#17361,#17362);+#17361 = CARTESIAN_POINT('',(0.,0.));+#17362 = VECTOR('',#17363,1.);+#17363 = DIRECTION('',(1.,0.));+#17364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17365 = PCURVE('',#1868,#17366);+#17366 = DEFINITIONAL_REPRESENTATION('',(#17367),#17371);+#17367 = LINE('',#17368,#17369);+#17368 = CARTESIAN_POINT('',(-0.347850445948,-0.334781226424));+#17369 = VECTOR('',#17370,1.);+#17370 = DIRECTION('',(1.,0.));+#17371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17372 = ADVANCED_FACE('',(#17373),#16998,.F.);+#17373 = FACE_BOUND('',#17374,.F.);+#17374 = EDGE_LOOP('',(#17375,#17398,#17399,#17400));+#17375 = ORIENTED_EDGE('',*,*,#17376,.T.);+#17376 = EDGE_CURVE('',#17377,#16954,#17379,.T.);+#17377 = VERTEX_POINT('',#17378);+#17378 = CARTESIAN_POINT('',(-1.239673570659,-0.515,-5.551115123126E-17)+ );+#17379 = SURFACE_CURVE('',#17380,(#17384,#17391),.PCURVE_S1.);+#17380 = LINE('',#17381,#17382);+#17381 = CARTESIAN_POINT('',(-1.239673570659,-0.515,-5.551115123126E-17)+ );+#17382 = VECTOR('',#17383,1.);+#17383 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17384 = PCURVE('',#16998,#17385);+#17385 = DEFINITIONAL_REPRESENTATION('',(#17386),#17390);+#17386 = LINE('',#17387,#17388);+#17387 = CARTESIAN_POINT('',(0.,0.));+#17388 = VECTOR('',#17389,1.);+#17389 = DIRECTION('',(0.,-1.));+#17390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17391 = PCURVE('',#16970,#17392);+#17392 = DEFINITIONAL_REPRESENTATION('',(#17393),#17397);+#17393 = LINE('',#17394,#17395);+#17394 = CARTESIAN_POINT('',(4.886921905584,0.));+#17395 = VECTOR('',#17396,1.);+#17396 = DIRECTION('',(0.,-1.));+#17397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17398 = ORIENTED_EDGE('',*,*,#16982,.T.);+#17399 = ORIENTED_EDGE('',*,*,#17327,.F.);+#17400 = ORIENTED_EDGE('',*,*,#17401,.F.);+#17401 = EDGE_CURVE('',#17377,#17328,#17402,.T.);+#17402 = SURFACE_CURVE('',#17403,(#17407,#17414),.PCURVE_S1.);+#17403 = LINE('',#17404,#17405);+#17404 = CARTESIAN_POINT('',(-1.239673570659,-0.515,-5.551115123126E-17)+ );+#17405 = VECTOR('',#17406,1.);+#17406 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#17407 = PCURVE('',#16998,#17408);+#17408 = DEFINITIONAL_REPRESENTATION('',(#17409),#17413);+#17409 = LINE('',#17410,#17411);+#17410 = CARTESIAN_POINT('',(0.,0.));+#17411 = VECTOR('',#17412,1.);+#17412 = DIRECTION('',(1.,0.));+#17413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17414 = PCURVE('',#1868,#17415);+#17415 = DEFINITIONAL_REPRESENTATION('',(#17416),#17420);+#17416 = LINE('',#17417,#17418);+#17417 = CARTESIAN_POINT('',(-0.347850445948,-0.174454797083));+#17418 = VECTOR('',#17419,1.);+#17419 = DIRECTION('',(0.,-1.));+#17420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17421 = ADVANCED_FACE('',(#17422),#16970,.T.);+#17422 = FACE_BOUND('',#17423,.T.);+#17423 = EDGE_LOOP('',(#17424,#17448,#17449,#17450));+#17424 = ORIENTED_EDGE('',*,*,#17425,.T.);+#17425 = EDGE_CURVE('',#17426,#17377,#17428,.T.);+#17426 = VERTEX_POINT('',#17427);+#17427 = CARTESIAN_POINT('',(-0.993471632406,-0.515,0.206587955583));+#17428 = SURFACE_CURVE('',#17429,(#17434,#17441),.PCURVE_S1.);+#17429 = CIRCLE('',#17430,0.25);+#17430 = AXIS2_PLACEMENT_3D('',#17431,#17432,#17433);+#17431 = CARTESIAN_POINT('',(-1.239673570659,-0.515,0.25));+#17432 = DIRECTION('',(1.144237745222E-17,1.,-3.851859888774E-34));+#17433 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#17434 = PCURVE('',#16970,#17435);+#17435 = DEFINITIONAL_REPRESENTATION('',(#17436),#17440);+#17436 = LINE('',#17437,#17438);+#17437 = CARTESIAN_POINT('',(6.28318530718,0.));+#17438 = VECTOR('',#17439,1.);+#17439 = DIRECTION('',(-1.,0.));+#17440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17441 = PCURVE('',#1868,#17442);+#17442 = DEFINITIONAL_REPRESENTATION('',(#17443),#17447);+#17443 = CIRCLE('',#17444,0.25);+#17444 = AXIS2_PLACEMENT_2D('',#17445,#17446);+#17445 = CARTESIAN_POINT('',(-9.7850445948E-02,-0.174454797083));+#17446 = DIRECTION('',(-0.173648177667,0.984807753012));+#17447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17448 = ORIENTED_EDGE('',*,*,#17376,.T.);+#17449 = ORIENTED_EDGE('',*,*,#16953,.F.);+#17450 = ORIENTED_EDGE('',*,*,#17451,.F.);+#17451 = EDGE_CURVE('',#17426,#16926,#17452,.T.);+#17452 = SURFACE_CURVE('',#17453,(#17457,#17464),.PCURVE_S1.);+#17453 = LINE('',#17454,#17455);+#17454 = CARTESIAN_POINT('',(-0.993471632406,-0.515,0.206587955583));+#17455 = VECTOR('',#17456,1.);+#17456 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17457 = PCURVE('',#16970,#17458);+#17458 = DEFINITIONAL_REPRESENTATION('',(#17459),#17463);+#17459 = LINE('',#17460,#17461);+#17460 = CARTESIAN_POINT('',(6.28318530718,0.));+#17461 = VECTOR('',#17462,1.);+#17462 = DIRECTION('',(0.,-1.));+#17463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17464 = PCURVE('',#16941,#17465);+#17465 = DEFINITIONAL_REPRESENTATION('',(#17466),#17470);+#17466 = LINE('',#17467,#17468);+#17467 = CARTESIAN_POINT('',(0.289296719965,5.14802368897E-19));+#17468 = VECTOR('',#17469,1.);+#17469 = DIRECTION('',(-4.926605106769E-30,-1.));+#17470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17471 = ADVANCED_FACE('',(#17472),#16941,.F.);+#17472 = FACE_BOUND('',#17473,.F.);+#17473 = EDGE_LOOP('',(#17474,#17497,#17498,#17499));+#17474 = ORIENTED_EDGE('',*,*,#17475,.T.);+#17475 = EDGE_CURVE('',#17476,#16893,#17478,.T.);+#17476 = VERTEX_POINT('',#17477);+#17477 = CARTESIAN_POINT('',(-0.948480775301,-0.515,0.492364817767));+#17478 = SURFACE_CURVE('',#17479,(#17483,#17490),.PCURVE_S1.);+#17479 = LINE('',#17480,#17481);+#17480 = CARTESIAN_POINT('',(-0.948480775301,-0.515,0.492364817767));+#17481 = VECTOR('',#17482,1.);+#17482 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17483 = PCURVE('',#16941,#17484);+#17484 = DEFINITIONAL_REPRESENTATION('',(#17485),#17489);+#17485 = LINE('',#17486,#17487);+#17486 = CARTESIAN_POINT('',(0.,0.));+#17487 = VECTOR('',#17488,1.);+#17488 = DIRECTION('',(-4.926605106769E-30,-1.));+#17489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17490 = PCURVE('',#16913,#17491);+#17491 = DEFINITIONAL_REPRESENTATION('',(#17492),#17496);+#17492 = LINE('',#17493,#17494);+#17493 = CARTESIAN_POINT('',(1.396263401592,0.));+#17494 = VECTOR('',#17495,1.);+#17495 = DIRECTION('',(0.,-1.));+#17496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17497 = ORIENTED_EDGE('',*,*,#16925,.T.);+#17498 = ORIENTED_EDGE('',*,*,#17451,.F.);+#17499 = ORIENTED_EDGE('',*,*,#17500,.F.);+#17500 = EDGE_CURVE('',#17476,#17426,#17501,.T.);+#17501 = SURFACE_CURVE('',#17502,(#17506,#17513),.PCURVE_S1.);+#17502 = LINE('',#17503,#17504);+#17503 = CARTESIAN_POINT('',(-0.948480775301,-0.515,0.492364817767));+#17504 = VECTOR('',#17505,1.);+#17505 = DIRECTION('',(-0.155518033909,1.779496044609E-18,+ -0.987833053268));+#17506 = PCURVE('',#16941,#17507);+#17507 = DEFINITIONAL_REPRESENTATION('',(#17508),#17512);+#17508 = LINE('',#17509,#17510);+#17509 = CARTESIAN_POINT('',(0.,0.));+#17510 = VECTOR('',#17511,1.);+#17511 = DIRECTION('',(1.,-6.052038146458E-35));+#17512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17513 = PCURVE('',#1868,#17514);+#17514 = DEFINITIONAL_REPRESENTATION('',(#17515),#17519);+#17515 = LINE('',#17516,#17517);+#17516 = CARTESIAN_POINT('',(0.144514371819,0.116737998275));+#17517 = VECTOR('',#17518,1.);+#17518 = DIRECTION('',(-0.987833053268,-0.155518033909));+#17519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17520 = ADVANCED_FACE('',(#17521),#16913,.F.);+#17521 = FACE_BOUND('',#17522,.F.);+#17522 = EDGE_LOOP('',(#17523,#17546,#17547,#17548));+#17523 = ORIENTED_EDGE('',*,*,#17524,.T.);+#17524 = EDGE_CURVE('',#17525,#16870,#17527,.T.);+#17525 = VERTEX_POINT('',#17526);+#17526 = CARTESIAN_POINT('',(-0.85,-0.515,0.575));+#17527 = SURFACE_CURVE('',#17528,(#17532,#17539),.PCURVE_S1.);+#17528 = LINE('',#17529,#17530);+#17529 = CARTESIAN_POINT('',(-0.85,-0.515,0.575));+#17530 = VECTOR('',#17531,1.);+#17531 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17532 = PCURVE('',#16913,#17533);+#17533 = DEFINITIONAL_REPRESENTATION('',(#17534),#17538);+#17534 = LINE('',#17535,#17536);+#17535 = CARTESIAN_POINT('',(0.,0.));+#17536 = VECTOR('',#17537,1.);+#17537 = DIRECTION('',(0.,-1.));+#17538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17539 = PCURVE('',#418,#17540);+#17540 = DEFINITIONAL_REPRESENTATION('',(#17541),#17545);+#17541 = LINE('',#17542,#17543);+#17542 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));+#17543 = VECTOR('',#17544,1.);+#17544 = DIRECTION('',(0.,-1.));+#17545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17546 = ORIENTED_EDGE('',*,*,#16892,.T.);+#17547 = ORIENTED_EDGE('',*,*,#17475,.F.);+#17548 = ORIENTED_EDGE('',*,*,#17549,.F.);+#17549 = EDGE_CURVE('',#17525,#17476,#17550,.T.);+#17550 = SURFACE_CURVE('',#17551,(#17556,#17563),.PCURVE_S1.);+#17551 = CIRCLE('',#17552,0.1);+#17552 = AXIS2_PLACEMENT_3D('',#17553,#17554,#17555);+#17553 = CARTESIAN_POINT('',(-0.85,-0.515,0.475));+#17554 = DIRECTION('',(-1.144237745222E-17,-1.,5.473822126269E-48));+#17555 = DIRECTION('',(1.110223024625E-15,-1.27035909039E-32,1.));+#17556 = PCURVE('',#16913,#17557);+#17557 = DEFINITIONAL_REPRESENTATION('',(#17558),#17562);+#17558 = LINE('',#17559,#17560);+#17559 = CARTESIAN_POINT('',(0.,0.));+#17560 = VECTOR('',#17561,1.);+#17561 = DIRECTION('',(1.,0.));+#17562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17563 = PCURVE('',#1868,#17564);+#17564 = DEFINITIONAL_REPRESENTATION('',(#17565),#17573);+#17565 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17566,#17567,#17568,#17569+ ,#17570,#17571,#17572),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17566 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#17567 = CARTESIAN_POINT('',(0.227149554052,4.201369281911E-02));+#17568 = CARTESIAN_POINT('',(7.7149554052E-02,0.128616233198));+#17569 = CARTESIAN_POINT('',(-7.2850445948E-02,0.215218773576));+#17570 = CARTESIAN_POINT('',(7.7149554052E-02,0.301821313954));+#17571 = CARTESIAN_POINT('',(0.227149554052,0.388423854333));+#17572 = CARTESIAN_POINT('',(0.227149554052,0.215218773576));+#17573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17574 = ADVANCED_FACE('',(#17575),#1896,.T.);+#17575 = FACE_BOUND('',#17576,.T.);+#17576 = EDGE_LOOP('',(#17577,#17599,#17600,#17601));+#17577 = ORIENTED_EDGE('',*,*,#17578,.T.);+#17578 = EDGE_CURVE('',#17178,#1853,#17579,.T.);+#17579 = SURFACE_CURVE('',#17580,(#17585,#17592),.PCURVE_S1.);+#17580 = CIRCLE('',#17581,0.25);+#17581 = AXIS2_PLACEMENT_3D('',#17582,#17583,#17584);+#17582 = CARTESIAN_POINT('',(-0.85,-0.515,0.475));+#17583 = DIRECTION('',(1.144237745222E-17,1.,1.54074395551E-33));+#17584 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#17585 = PCURVE('',#1896,#17586);+#17586 = DEFINITIONAL_REPRESENTATION('',(#17587),#17591);+#17587 = LINE('',#17588,#17589);+#17588 = CARTESIAN_POINT('',(6.28318530718,0.));+#17589 = VECTOR('',#17590,1.);+#17590 = DIRECTION('',(-1.,0.));+#17591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17592 = PCURVE('',#1868,#17593);+#17593 = DEFINITIONAL_REPRESENTATION('',(#17594),#17598);+#17594 = CIRCLE('',#17595,0.25);+#17595 = AXIS2_PLACEMENT_2D('',#17596,#17597);+#17596 = CARTESIAN_POINT('',(0.127149554052,0.215218773576));+#17597 = DIRECTION('',(0.173648177667,-0.984807753012));+#17598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17599 = ORIENTED_EDGE('',*,*,#1880,.T.);+#17600 = ORIENTED_EDGE('',*,*,#17127,.F.);+#17601 = ORIENTED_EDGE('',*,*,#17177,.F.);+#17602 = ADVANCED_FACE('',(#17603),#1868,.F.);+#17603 = FACE_BOUND('',#17604,.F.);+#17604 = EDGE_LOOP('',(#17605,#17626,#17647,#17648,#17649,#17650,#17651,+ #17652,#17653,#17654,#17655,#17656));+#17605 = ORIENTED_EDGE('',*,*,#17606,.F.);+#17606 = EDGE_CURVE('',#403,#1830,#17607,.T.);+#17607 = SURFACE_CURVE('',#17608,(#17612,#17619),.PCURVE_S1.);+#17608 = LINE('',#17609,#17610);+#17609 = CARTESIAN_POINT('',(-0.8,-0.515,0.536425222974));+#17610 = VECTOR('',#17611,1.);+#17611 = DIRECTION('',(0.,0.,1.));+#17612 = PCURVE('',#1868,#17613);+#17613 = DEFINITIONAL_REPRESENTATION('',(#17614),#17618);+#17614 = LINE('',#17615,#17616);+#17615 = CARTESIAN_POINT('',(0.188574777026,0.265218773576));+#17616 = VECTOR('',#17617,1.);+#17617 = DIRECTION('',(1.,0.));+#17618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17619 = PCURVE('',#446,#17620);+#17620 = DEFINITIONAL_REPRESENTATION('',(#17621),#17625);+#17621 = LINE('',#17622,#17623);+#17622 = CARTESIAN_POINT('',(0.84,-0.188574777026));+#17623 = VECTOR('',#17624,1.);+#17624 = DIRECTION('',(0.,1.));+#17625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17626 = ORIENTED_EDGE('',*,*,#17627,.T.);