component
THVD2410DR
Public Made by Adomby adom
Texas Instruments RS-485/RS-422 ICs, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -32,25 +32,25 @@ "number": "1", "name": "R", "type": "output",- "description": "Receive data output. Digital CMOS output presenting the recovered logic level from the differential A/B bus (VOH \u2265 VCC\u22120.4 V at \u22128 mA, VOL \u2264 0.4 V at 8 mA). High-impedance when the receiver is disabled (RE = VCC)."+ "description": "Receive data output. Digital CMOS output presenting the recovered logic level from the differential A/B bus (VOH ≥ VCC−0.4 V at −8 mA, VOL ≤ 0.4 V at 8 mA). High-impedance when the receiver is disabled (RE = VCC)." }, { "number": "2", "name": "RE", "type": "input",- "description": "Receiver enable, active low. Digital input with 2-M\u03a9 internal pull-up; drive low to enable the receiver output on pin R, drive high to place R in Hi-Z. Combined RE=high and DE=low condition triggers low-power shutdown."+ "description": "Receiver enable, active low. Digital input with 2-MΩ internal pull-up; drive low to enable the receiver output on pin R, drive high to place R in Hi-Z. Combined RE=high and DE=low condition triggers low-power shutdown." }, { "number": "3", "name": "DE", "type": "input",- "description": "Driver enable, active high. Digital input with 2-M\u03a9 internal pull-down; drive high to enable the A/B differential line driver, drive low to place the driver outputs in Hi-Z. Combined RE=high and DE=low condition triggers low-power shutdown."+ "description": "Driver enable, active high. Digital input with 2-MΩ internal pull-down; drive high to enable the A/B differential line driver, drive low to place the driver outputs in Hi-Z. Combined RE=high and DE=low condition triggers low-power shutdown." }, { "number": "4", "name": "D", "type": "input",- "description": "Driver data input. Digital CMOS input (VIH \u2265 2 V, VIL \u2264 0.8 V) whose logic state sets the polarity of the differential signal driven onto the A and B bus pins when DE is high."+ "description": "Driver data input. Digital CMOS input (VIH ≥ 2 V, VIL ≤ 0.8 V) whose logic state sets the polarity of the differential signal driven onto the A and B bus pins when DE is high." }, { "number": "5",@@ -62,19 +62,19 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "RS-485/RS-422 bus I/O port A (non-inverting, complementary to B). Fault-protected to \u00b170 V DC, tolerates \u00b125 V common-mode, and withstands \u00b116-kV HBM / \u00b112-kV IEC 61000-4-2 ESD. Differential driver output when DE=high; receiver input when RE=low."+ "description": "RS-485/RS-422 bus I/O port A (non-inverting, complementary to B). Fault-protected to ±70 V DC, tolerates ±25 V common-mode, and withstands ±16-kV HBM / ±12-kV IEC 61000-4-2 ESD. Differential driver output when DE=high; receiver input when RE=low." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "RS-485/RS-422 bus I/O port B (inverting, complementary to A). Fault-protected to \u00b170 V DC, tolerates \u00b125 V common-mode, and withstands \u00b116-kV HBM / \u00b112-kV IEC 61000-4-2 ESD. Differential driver output when DE=high; receiver input when RE=low."+ "description": "RS-485/RS-422 bus I/O port B (inverting, complementary to A). Fault-protected to ±70 V DC, tolerates ±25 V common-mode, and withstands ±16-kV HBM / ±12-kV IEC 61000-4-2 ESD. Differential driver output when DE=high; receiver input when RE=low." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Supply voltage input, 3 V to 5.5 V (3.3-V or 5-V nominal). Quiescent current ~5.6 mA with driver and receiver enabled; <1 \u00b5A in shutdown. Recommended to bypass with a 100-nF ceramic capacitor to GND close to the pin."+ "description": "Supply voltage input, 3 V to 5.5 V (3.3-V or 5-V nominal). Quiescent current ~5.6 mA with driver and receiver enabled; <1 µA in shutdown. Recommended to bypass with a 100-nF ceramic capacitor to GND close to the pin." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/thvd2410dr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }