component
THVD1400DR
Public Made by Adomby adom
Texas Instruments Interface - Specialized, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -32,25 +32,25 @@ "number": "1", "name": "R", "type": "output",- "description": "Receive data output. Digital CMOS output driven by the differential receiver comparing bus pins A and B. VOH \u2265 VCC-0.4 V at IOH = -4 mA; VOL \u2264 0.4 V at IOL = 4 mA."+ "description": "Receive data output. Digital CMOS output driven by the differential receiver comparing bus pins A and B. VOH ≥ VCC-0.4 V at IOH = -4 mA; VOL ≤ 0.4 V at IOL = 4 mA." }, { "number": "2", "name": "RE", "type": "input",- "description": "Receiver enable, active low. Digital input with internal 2-M\u03a9 pull-up to VCC. When low, the receiver is enabled and drives pin R; when high, R goes to high-impedance."+ "description": "Receiver enable, active low. Digital input with internal 2-MΩ pull-up to VCC. When low, the receiver is enabled and drives pin R; when high, R goes to high-impedance." }, { "number": "3", "name": "DE", "type": "input",- "description": "Driver enable, active high. Digital input with internal 2-M\u03a9 pull-down to GND. When high, the driver is enabled and drives bus pins A and B; when low, A/B go to high-impedance."+ "description": "Driver enable, active high. Digital input with internal 2-MΩ pull-down to GND. When high, the driver is enabled and drives bus pins A and B; when low, A/B go to high-impedance." }, { "number": "4", "name": "D", "type": "input",- "description": "Driver data input. Digital CMOS input; logic level driven onto the differential bus (A/B) when DE is high. VIH \u2265 2 V, VIL \u2264 0.8 V."+ "description": "Driver data input. Digital CMOS input; logic level driven onto the differential bus (A/B) when DE is high. VIH ≥ 2 V, VIL ≤ 0.8 V." }, { "number": "5",@@ -62,19 +62,19 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "Non-inverting RS-485 differential bus I/O port (complementary to B). Bus voltage range -7 V to +12 V; \u00b112-kV IEC 61000-4-2 contact ESD protection; \u00b116-V absolute-max fault voltage; 1/8 unit load."+ "description": "Non-inverting RS-485 differential bus I/O port (complementary to B). Bus voltage range -7 V to +12 V; ±12-kV IEC 61000-4-2 contact ESD protection; ±16-V absolute-max fault voltage; 1/8 unit load." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "Inverting RS-485 differential bus I/O port (complementary to A). Bus voltage range -7 V to +12 V; \u00b112-kV IEC 61000-4-2 contact ESD protection; \u00b116-V absolute-max fault voltage; 1/8 unit load."+ "description": "Inverting RS-485 differential bus I/O port (complementary to A). Bus voltage range -7 V to +12 V; ±12-kV IEC 61000-4-2 contact ESD protection; ±16-V absolute-max fault voltage; 1/8 unit load." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Supply voltage input, 3 V to 5.5 V (nominal 3.3 V or 5 V). Quiescent supply current 1.5 mA typical; standby current < 1 \u00b5A."+ "description": "Supply voltage input, 3 V to 5.5 V (nominal 3.3 V or 5 V). Quiescent supply current 1.5 mA typical; standby current < 1 µA." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/thvd1400dr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }