component
THS7530QPWPRQ1
Public Made by Adomby adom
Texas Instruments Operational Amplifier, HTSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# THS7530QPWPRQ1++**Texas Instruments** · Operational Amplifier · HTSSOP-14++THS7530QPWPRQ1 from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No internal connection. |+| 2 | NC | unconnected | No internal connection. |+| 3 | VIN+ | power_in | Noninverting amplifier input with differential input impedance of 8.5 kΩ || 3 pF and input bias current of 20 µA typical at 25°C. |+| 4 | VIN- | power_in | Inverting amplifier input with differential input impedance of 8.5 kΩ || 3 pF and input bias current of 20 µA typical at 25°C. |+| 5 | VG+ | input | Gain control voltage input; voltage range 0 to 0.9 V sets amplifier gain from 11.6 dB to 46.5 dB with slope of 38.8 dB/V. |+| 6 | VG- | input | Gain control voltage input with range -0.6 to 0.8 V relative to VS- for differential gain control; bias current less than 1 µA. |+| 7 | PD | input | Power down control input; logic low puts device into power-down mode reducing quiescent current to 350 µA from typical 40 mA. |+| 8 | VS- | power_in | Negative amplifier power-supply input; reference for operating voltage between VS- and VS+ not exceeding 5.5 V absolute maximum. |+| 9 | VS+ | power_in | Positive amplifier power-supply input; nominal 5 V with operating range 4.5 to 5.5 V and maximum quiescent current 49 mA at 125°C. |+| 10 | VOUT+ | output | Noninverted amplifier output; low impedance differential output of 15 Ω with 300 MHz small-signal bandwidth and ±30 mA maximum output current. |+| 11 | VOUT- | output | Inverted amplifier output; low impedance differential output of 15 Ω with 300 MHz small-signal bandwidth and ±30 mA maximum output current. |+| 12 | VOCM | input | Output common-mode voltage control input; 1 V/V gain with 32 MHz bandwidth and input range 1.75 V to 3.25 V above VS-. |+| 13 | VCL- | input | Output negative clamp voltage input; establishes minimum output voltage with typical error of ±25 mV and input resistance of 3.3 kΩ. |+| 14 | VCL+ | input | Output positive clamp voltage input; establishes maximum output voltage with typical error of ±25 mV and input resistance of 3.3 kΩ. |+| 15 | PowerPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14 |+| Category | Amplifiers/Comparators |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `THS7530QPWPRQ1`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14 (KiCad packages3D, STEP)+- 3D model files: `ths7530qpwprq1-etched.step` / `ths7530qpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ths7530qpwprq1.step` / `ths7530qpwprq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ths7530-q1) (29 pp, sha256 `ab0f11f11c71e352`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ths7530qpwprq1-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "ths7530qpwprq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Operational Amplifier, HTSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "ths7530qpwprq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ths7530qpwprq1.kicad_sym",+ "ths7530qpwprq1.kicad_mod",+ "ths7530qpwprq1.glb",+ "ths7530qpwprq1.step",+ "ths7530qpwprq1.lbr",+ "docs/hero.png",+ "docs/ths7530qpwprq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "THS7530QPWPRQ1",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14",+ "pin_count": 15,+ "category": "Amplifiers/Comparators",+ "subcategory": "Operational Amplifier",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ths7530-q1",+ "parts": {+ "symbol": "ths7530qpwprq1.kicad_sym",+ "footprint": "ths7530qpwprq1.kicad_mod",+ "model_3d": "ths7530qpwprq1-etched.glb",+ "model_3d_plain": "ths7530qpwprq1.glb",+ "model_3d_step": "ths7530qpwprq1-etched.step",+ "model_3d_step_plain": "ths7530qpwprq1.step",+ "lbr": "ths7530qpwprq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2058685",+ "digikey": "2156-THS7530QPWPRQ1-296-ND",+ "mouser": "595-THS7530QPWPRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T00:36:16Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "2156-THS7530QPWPRQ1-296-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-THS7530QPWPRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "3",+ "name": "VIN+",+ "type": "power_in",+ "description": "Noninverting amplifier input with differential input impedance of 8.5 kΩ || 3 pF and input bias current of 20 µA typical at 25°C."+ },+ {+ "number": "4",+ "name": "VIN-",+ "type": "power_in",+ "description": "Inverting amplifier input with differential input impedance of 8.5 kΩ || 3 pF and input bias current of 20 µA typical at 25°C."+ },+ {+ "number": "5",+ "name": "VG+",+ "type": "input",+ "description": "Gain control voltage input; voltage range 0 to 0.9 V sets amplifier gain from 11.6 dB to 46.5 dB with slope of 38.8 dB/V."+ },+ {+ "number": "6",+ "name": "VG-",+ "type": "input",+ "description": "Gain control voltage input with range -0.6 to 0.8 V relative to VS- for differential gain control; bias current less than 1 µA."+ },+ {+ "number": "7",+ "name": "PD",+ "type": "input",+ "description": "Power down control input; logic low puts device into power-down mode reducing quiescent current to 350 µA from typical 40 mA."+ },+ {+ "number": "8",+ "name": "VS-",+ "type": "power_in",+ "description": "Negative amplifier power-supply input; reference for operating voltage between VS- and VS+ not exceeding 5.5 V absolute maximum."+ },+ {+ "number": "9",+ "name": "VS+",+ "type": "power_in",+ "description": "Positive amplifier power-supply input; nominal 5 V with operating range 4.5 to 5.5 V and maximum quiescent current 49 mA at 125°C."+ },+ {+ "number": "10",+ "name": "VOUT+",+ "type": "output",+ "description": "Noninverted amplifier output; low impedance differential output of 15 Ω with 300 MHz small-signal bandwidth and ±30 mA maximum output current."+ },+ {+ "number": "11",+ "name": "VOUT-",+ "type": "output",+ "description": "Inverted amplifier output; low impedance differential output of 15 Ω with 300 MHz small-signal bandwidth and ±30 mA maximum output current."+ },+ {+ "number": "12",+ "name": "VOCM",+ "type": "input",+ "description": "Output common-mode voltage control input; 1 V/V gain with 32 MHz bandwidth and input range 1.75 V to 3.25 V above VS-."+ },+ {+ "number": "13",+ "name": "VCL-",+ "type": "input",+ "description": "Output negative clamp voltage input; establishes minimum output voltage with typical error of ±25 mV and input resistance of 3.3 kΩ."+ },+ {+ "number": "14",+ "name": "VCL+",+ "type": "input",+ "description": "Output positive clamp voltage input; establishes maximum output voltage with typical error of ±25 mV and input resistance of 3.3 kΩ."+ },+ {+ "number": "15",+ "name": "PowerPAD",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 15 added from the footprint"+ ],+ "pages_sent": 29,+ "cost_usd": 0.3056,+ "at": "2026-09-27T00:36:00"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ths7530-q1",+ "pages": 29,+ "sha256": "ab0f11f11c71e352",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}