component
THS6022IPWPR
Public Made by Adomby adom
Texas Instruments Differential Amplifiers, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+51@@ -0,0 +1,51 @@+# THS6022IPWPR++**Texas Instruments** · Differential Amplifiers · HTSSOP-14-EP++THS6022IPWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC- | power_in | Negative supply terminal (the PWP table lists pins 1 and 14 together as VCC-); the datasheet allows split supplies of ±4.5 V to ±16 V or a single supply of 9 V to 32 V, with VCC+ to VCC- limited to 33 V absolute maximum. |+| 2 | 1OUT | output | Output of driver 1, which the datasheet specifies to deliver at least 200 mA into a 50-Ω load, with an absolute maximum output current of 400 mA. |+| 3 | VCC+ | power_in | Positive supply terminal (the PWP table lists pins 3 and 12 together as VCC+), within the 9 V to 32 V single-supply or ±4.5 V to ±16 V split-supply range and 33 V absolute maximum from VCC+ to VCC-. |+| 4 | 1IN+ | input | Non-inverting input of driver 1; the absolute maximum input voltage is ±VCC, and the differential input voltage absolute maximum is 6 V. |+| 5 | 1IN- | input | Inverting input of driver 1; the absolute maximum input voltage is ±VCC, and the differential input voltage absolute maximum is 6 V. |+| 6 | NC | unconnected | No internal connection; leave this pin unconnected. |+| 7 | NC | unconnected | No internal connection; leave this pin unconnected. |+| 8 | NC | unconnected | No internal connection; leave this pin unconnected. |+| 9 | NC | unconnected | No internal connection; leave this pin unconnected. |+| 10 | 2IN- | input | Inverting input of driver 2; the absolute maximum input voltage is ±VCC, and the differential input voltage absolute maximum is 6 V. |+| 11 | 2IN+ | input | Non-inverting input of driver 2; the absolute maximum input voltage is ±VCC, and the differential input voltage absolute maximum is 6 V. |+| 12 | VCC+ | power_in | Positive supply terminal (the PWP table lists pins 3 and 12 together as VCC+), within the 9 V to 32 V single-supply or ±4.5 V to ±16 V split-supply range and 33 V absolute maximum from VCC+ to VCC-. |+| 13 | 2OUT | output | Output of driver 2, which the datasheet specifies to deliver at least 200 mA into a 50-Ω load, with an absolute maximum output current of 400 mA. |+| 14 | VCC- | power_in | Negative supply terminal (the PWP table lists pins 1 and 14 together as VCC-); the datasheet allows split supplies of ±4.5 V to ±16 V or a single supply of 9 V to 32 V, with VCC+ to VCC- limited to 33 V absolute maximum. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Amplifiers/Comparators |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `THS6022IPWPR`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `ths6022ipwpr-etched.step` / `ths6022ipwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ths6022ipwpr.step` / `ths6022ipwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ths6022) (44 pp, sha256 `5292d74e0febc38b`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ths6022ipwpr-datasheet.pdf)
page.jsonadded+243@@ -0,0 +1,243 @@+{+ "slug": "ths6022ipwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Differential Amplifiers, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "ths6022ipwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ths6022ipwpr.kicad_sym",+ "ths6022ipwpr.kicad_mod",+ "ths6022ipwpr.glb",+ "ths6022ipwpr.step",+ "ths6022ipwpr.lbr",+ "docs/hero.png",+ "docs/ths6022ipwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ths6022ipwpr-hero.glb",+ "ths6022ipwpr-hero.overlay.json"+ ],+ "component": {+ "mpn": "THS6022IPWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14-EP",+ "pin_count": 15,+ "category": "Amplifiers/Comparators",+ "subcategory": "Differential Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ths6022",+ "parts": {+ "symbol": "ths6022ipwpr.kicad_sym",+ "footprint": "ths6022ipwpr.kicad_mod",+ "model_3d": "ths6022ipwpr-hero.glb",+ "model_3d_plain": "ths6022ipwpr.glb",+ "model_3d_step": "ths6022ipwpr-etched.step",+ "model_3d_step_plain": "ths6022ipwpr.step",+ "lbr": "ths6022ipwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2870064",+ "digikey": "THS6022IPWPR-ND",+ "mouser": "595-THS6022IPWPR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T16:50:56Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "THS6022IPWPR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-THS6022IPWPR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC–",+ "type": "power_in",+ "description": "Negative supply terminal (the PWP table lists pins 1 and 14 together as VCC-); the datasheet allows split supplies of ±4.5 V to ±16 V or a single supply of 9 V to 32 V, with VCC+ to VCC- limited to 33 V absolute maximum."+ },+ {+ "number": "2",+ "name": "1OUT",+ "type": "output",+ "description": "Output of driver 1, which the datasheet specifies to deliver at least 200 mA into a 50-Ω load, with an absolute maximum output current of 400 mA."+ },+ {+ "number": "3",+ "name": "VCC+",+ "type": "power_in",+ "description": "Positive supply terminal (the PWP table lists pins 3 and 12 together as VCC+), within the 9 V to 32 V single-supply or ±4.5 V to ±16 V split-supply range and 33 V absolute maximum from VCC+ to VCC-."+ },+ {+ "number": "4",+ "name": "1IN+",+ "type": "input",+ "description": "Non-inverting input of driver 1; the absolute maximum input voltage is ±VCC, and the differential input voltage absolute maximum is 6 V."+ },+ {+ "number": "5",+ "name": "1IN–",+ "type": "input",+ "description": "Inverting input of driver 1; the absolute maximum input voltage is ±VCC, and the differential input voltage absolute maximum is 6 V."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; leave this pin unconnected."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; leave this pin unconnected."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; leave this pin unconnected."+ },+ {+ "number": "9",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; leave this pin unconnected."+ },+ {+ "number": "10",+ "name": "2IN–",+ "type": "input",+ "description": "Inverting input of driver 2; the absolute maximum input voltage is ±VCC, and the differential input voltage absolute maximum is 6 V."+ },+ {+ "number": "11",+ "name": "2IN+",+ "type": "input",+ "description": "Non-inverting input of driver 2; the absolute maximum input voltage is ±VCC, and the differential input voltage absolute maximum is 6 V."+ },+ {+ "number": "12",+ "name": "VCC+",+ "type": "power_in",+ "description": "Positive supply terminal (the PWP table lists pins 3 and 12 together as VCC+), within the 9 V to 32 V single-supply or ±4.5 V to ±16 V split-supply range and 33 V absolute maximum from VCC+ to VCC-."+ },+ {+ "number": "13",+ "name": "2OUT",+ "type": "output",+ "description": "Output of driver 2, which the datasheet specifies to deliver at least 200 mA into a 50-Ω load, with an absolute maximum output current of 400 mA."+ },+ {+ "number": "14",+ "name": "VCC–",+ "type": "power_in",+ "description": "Negative supply terminal (the PWP table lists pins 1 and 14 together as VCC-); the datasheet allows split supplies of ±4.5 V to ±16 V or a single supply of 9 V to 32 V, with VCC+ to VCC- limited to 33 V absolute maximum."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The PWP terminal table (page 3) has no pin number for the exposed PowerPAD thermal pad, and the data; The PWP table lists VCC+ on pins 3 and 12 and VCC– on pins 1 and 14 without assigning them to a spec; The pinout comes from page 3, but several pin descriptions cite electrical limits taken from page 1 ",+ "exposed pad 15 added from the footprint"+ ],+ "pages_sent": 8,+ "cost_usd": 0.053,+ "at": "2026-10-08T16:50:38"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ths6022",+ "pages": 44,+ "sha256": "5292d74e0febc38b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ths6022ipwpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.35,+ 5,+ 1.05+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ths6022ipwpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.35,+ 5,+ 1.05+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7ae466801f5483b060c5d7e4386c77c9d784a2939df4d77ed6b2437e446dc176",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}