ths4551irgtr

@@ -33,5 +33,133 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "THS4551IRGTR",+    "manufacturer": "Texas Instruments",+    "package": "QFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Differential OpAmps",+    "datasheet": "https://www.ti.com/lit/ds/symlink/ths4551i.pdf",+    "parts": {+      "symbol": "ths4551irgtr.kicad_sym",+      "footprint": "ths4551irgtr.kicad_mod",+      "model_3d": "ths4551irgtr-etched.glb",+      "model_3d_plain": "ths4551irgtr.glb",+      "model_3d_step": "ths4551irgtr-etched.step",+      "model_3d_step_plain": "ths4551irgtr.step",+      "lbr": "ths4551irgtr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "FB-",+        "type": "output",+        "description": "Inverting (negative) output feedback tap. Internally routed from the OUT- output through a trimmed ~3.5 Ω internal feedback trace; use in gain networks that require the internal feedback path (RGT package only)."+      },+      {+        "number": "2",+        "name": "IN+",+        "type": "input",+        "description": "Noninverting (positive) amplifier input. High-impedance analog input to the fully differential amplifier; input common-mode range extends to the negative supply rail (NRI)."+      },+      {+        "number": "3",+        "name": "IN-",+        "type": "input",+        "description": "Inverting (negative) amplifier input. High-impedance analog input to the fully differential amplifier; input common-mode range extends to the negative supply rail (NRI)."+      },+      {+        "number": "4",+        "name": "FB+",+        "type": "output",+        "description": "Noninverting (positive) output feedback tap. Internally routed from the OUT+ output through a trimmed ~3.5 Ω internal feedback trace; use in gain networks that require the internal feedback path (RGT package only)."+      },+      {+        "number": "5",+        "name": "VS+",+        "type": "power_in",+        "description": "Positive power-supply input. Single-supply operation 2.7 V to 5.4 V, or split-supply. Bypass to VS- with 100 nF close to the pin; typical IQ = 1.37 mA at 5 V."+      },+      {+        "number": "6",+        "name": "VS+",+        "type": "power_in",+        "description": "Positive power-supply input (tied internally with other VS+ pins). Single-supply operation 2.7 V to 5.4 V. Tie to pins 5, 7, 8."+      },+      {+        "number": "7",+        "name": "VS+",+        "type": "power_in",+        "description": "Positive power-supply input (tied internally with other VS+ pins). Single-supply operation 2.7 V to 5.4 V. Tie to pins 5, 6, 8."+      },+      {+        "number": "8",+        "name": "VS+",+        "type": "power_in",+        "description": "Positive power-supply input (tied internally with other VS+ pins). Single-supply operation 2.7 V to 5.4 V. Tie to pins 5, 6, 7."+      },+      {+        "number": "9",+        "name": "VOCM",+        "type": "input",+        "description": "Output common-mode voltage control input. Sets the DC common-mode level of OUT+ and OUT-. Leave open to default to midsupply, or drive from an ADC VREF/2 output; wide range supports 0.7 V to 3.0 V common-mode requirements."+      },+      {+        "number": "10",+        "name": "OUT+",+        "type": "output",+        "description": "Noninverting (positive) amplifier output. Rail-to-rail output; drives ADC inputs directly. Continuous output current ±60 mA typ at ±2.5 V, RL = 40 Ω."+      },+      {+        "number": "11",+        "name": "OUT-",+        "type": "output",+        "description": "Inverting (negative) amplifier output. Rail-to-rail output; drives ADC inputs directly. Continuous output current ±60 mA typ at ±2.5 V, RL = 40 Ω."+      },+      {+        "number": "12",+        "name": "PD",+        "type": "input",+        "description": "Power-down control input. PD logic low = shutdown; PD logic high = normal operation. Enable threshold above (VS-)+1.15 V, disable threshold below (VS-)+0.55 V. Do not float - tie to VS+ for always-on."+      },+      {+        "number": "13",+        "name": "VS-",+        "type": "power_in",+        "description": "Negative power-supply input (tied internally with other VS- pins). Ground for single-supply operation, or negative rail for split-supply. Tie to pins 14, 15, 16."+      },+      {+        "number": "14",+        "name": "VS-",+        "type": "power_in",+        "description": "Negative power-supply input (tied internally with other VS- pins). Ground for single-supply operation, or negative rail for split-supply. Tie to pins 13, 15, 16."+      },+      {+        "number": "15",+        "name": "VS-",+        "type": "power_in",+        "description": "Negative power-supply input (tied internally with other VS- pins). Ground for single-supply operation, or negative rail for split-supply. Tie to pins 13, 14, 16."+      },+      {+        "number": "16",+        "name": "VS-",+        "type": "power_in",+        "description": "Negative power-supply input (tied internally with other VS- pins). Ground for single-supply operation, or negative rail for split-supply. Tie to pins 13, 14, 15."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed thermal pad (bottom side). Electrically isolated from the die but must be soldered to a heat-spreading power or ground plane; do not float. Improves thermal dissipation (RθJC(bot) = 12 °C/W)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}