component
THS4121IDGKR
Public Made by Adomby adom
Texas Instruments Differential Amplifiers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# THS4121IDGKR++**Texas Instruments** · Differential Amplifiers · MSOP-8++THS4121IDGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN− | power_in | Inverting differential input of the THS4121 fully differential amplifier, with the feedback network setting the gain (A = Rf/Rg). |+| 2 | VOCM | input | Output common-mode voltage input that sets the common-mode level of the differential outputs; VOCM symmetry must be maintained for proper operation. |+| 3 | VDD | power_in | Positive supply pin; the datasheet specifies VDD = 3.3 V operation and an absolute maximum supply of 3.6 V (GND to VDD). |+| 4 | VOUT+ | output | Non-inverting differential output; for capacitive loads above 10 pF, a series output resistor of at least 20 Ω is recommended. |+| 5 | VOUT− | output | Inverting differential output; for capacitive loads above 10 pF, a series output resistor of at least 20 Ω is recommended. |+| 6 | GND | power_in | Ground reference pin for the amplifier supply (supply is specified as GND to VDD). |+| 7 | NC | unconnected | No internal connection on the THS4121; leave unconnected (the THS4120 uses this position for PD, which is not present on the THS4121). |+| 8 | VIN+ | power_in | Non-inverting differential input of the THS4121 fully differential amplifier, with the feedback network setting the gain (A = Rf/Rg). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-8 |+| Category | Amplifiers/Comparators |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `THS4121IDGKR`+- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`+- 3D model: MSOP-8 (KiCad packages3D, STEP)+- 3D model files: `ths4121idgkr-etched.step` / `ths4121idgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ths4121idgkr.step` / `ths4121idgkr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ths4121) (37 pp, sha256 `705c359dabda7e27`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ths4121idgkr-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "ths4121idgkr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Differential Amplifiers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "ths4121idgkr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ths4121idgkr.kicad_sym",+ "ths4121idgkr.kicad_mod",+ "ths4121idgkr.glb",+ "ths4121idgkr.step",+ "ths4121idgkr.lbr",+ "docs/hero.png",+ "docs/ths4121idgkr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ths4121idgkr-hero.glb",+ "ths4121idgkr-hero.overlay.json"+ ],+ "component": {+ "mpn": "THS4121IDGKR",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-8",+ "pin_count": 8,+ "category": "Amplifiers/Comparators",+ "subcategory": "Differential Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ths4121",+ "parts": {+ "symbol": "ths4121idgkr.kicad_sym",+ "footprint": "ths4121idgkr.kicad_mod",+ "model_3d": "ths4121idgkr-hero.glb",+ "model_3d_plain": "ths4121idgkr.glb",+ "model_3d_step": "ths4121idgkr-etched.step",+ "model_3d_step_plain": "ths4121idgkr.step",+ "lbr": "ths4121idgkr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2060419",+ "digikey": "THS4121IDGKR-ND",+ "mouser": "595-THS4121IDGKR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:17:57Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "THS4121IDGKR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-THS4121IDGKR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN−",+ "type": "power_in",+ "description": "Inverting differential input of the THS4121 fully differential amplifier, with the feedback network setting the gain (A = Rf/Rg)."+ },+ {+ "number": "2",+ "name": "VOCM",+ "type": "input",+ "description": "Output common-mode voltage input that sets the common-mode level of the differential outputs; VOCM symmetry must be maintained for proper operation."+ },+ {+ "number": "3",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply pin; the datasheet specifies VDD = 3.3 V operation and an absolute maximum supply of 3.6 V (GND to VDD)."+ },+ {+ "number": "4",+ "name": "VOUT+",+ "type": "output",+ "description": "Non-inverting differential output; for capacitive loads above 10 pF, a series output resistor of at least 20 Ω is recommended."+ },+ {+ "number": "5",+ "name": "VOUT−",+ "type": "output",+ "description": "Inverting differential output; for capacitive loads above 10 pF, a series output resistor of at least 20 Ω is recommended."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin for the amplifier supply (supply is specified as GND to VDD)."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection on the THS4121; leave unconnected (the THS4120 uses this position for PD, which is not present on the THS4121)."+ },+ {+ "number": "8",+ "name": "VIN+",+ "type": "power_in",+ "description": "Non-inverting differential input of the THS4121 fully differential amplifier, with the feedback network setting the gain (A = Rf/Rg)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet's top-view drawing gives pin numbers (1 2 3 4 8 7 6 5) and pin names as separate text ; The datasheet does not describe a thermal pad for the DGK package; the PowerPAD thermal pad discusse; The datasheet gives only limited per-pin function text. The descriptions for VIN+/VIN-, VDD, GND, an"+ ],+ "pages_sent": 9,+ "cost_usd": 0.0642,+ "at": "2026-10-08T15:17:42"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ths4121",+ "pages": 37,+ "sha256": "705c359dabda7e27",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ths4121idgkr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ths4121idgkr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "71e90cc5d729864b386d9d02882b71e0eca79ad0ccffd529c8c2330c271bceda",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}