← Commit history

ths4001id: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·8ccd68ed44 · ·parent d2050aa
2 files changed +93−13
package.json+51−11
@@ -68,25 +68,25 @@         "number": "1",         "name": "NULL",         "type": "passive",-        "description": "Offset null adjustment terminal; connect 10 k\u03a9 potentiometer between pins 1 and 8 with wiper to VCC- for input offset voltage correction."+        "description": "Offset null adjustment terminal; connect 10 kΩ potentiometer between pins 1 and 8 with wiper to VCC- for input offset voltage correction."       },       {         "number": "2",-        "name": "IN\u2013",+        "name": "IN–",         "type": "input",-        "description": "Inverting input with maximum differential input voltage \u00b14 V, input impedance 10 M\u03a9, and input bias current 2.6 to 5 \u00b5A at 25\u00b0C with \u00b115 V supply."+        "description": "Inverting input with maximum differential input voltage ±4 V, input impedance 10 MΩ, and input bias current 2.6 to 5 µA at 25°C with ±15 V supply."       },       {         "number": "3",         "name": "IN+",         "type": "input",-        "description": "Non-inverting input with maximum differential input voltage \u00b14 V, input impedance 10 M\u03a9, and input bias current 2.6 to 5 \u00b5A at 25\u00b0C with \u00b115 V supply."+        "description": "Non-inverting input with maximum differential input voltage ±4 V, input impedance 10 MΩ, and input bias current 2.6 to 5 µA at 25°C with ±15 V supply."       },       {         "number": "4",-        "name": "VCC\u2013",+        "name": "VCC–",         "type": "power_in",-        "description": "Negative power supply terminal; operates at \u00b12.5 V to \u00b115 V dual supply or 0 V in single supply mode, maximum 33 V between VCC+ and VCC-."+        "description": "Negative power supply terminal; operates at ±2.5 V to ±15 V dual supply or 0 V in single supply mode, maximum 33 V between VCC+ and VCC-."       },       {         "number": "5",@@ -98,19 +98,19 @@         "number": "6",         "name": "OUT",         "type": "output",-        "description": "Output terminal with maximum output current 175 mA at \u00b1VCC and output voltage swing \u00b113 V at \u00b115 V supply with 500 \u03a9 load."+        "description": "Output terminal with maximum output current 175 mA at ±VCC and output voltage swing ±13 V at ±15 V supply with 500 Ω load."       },       {         "number": "7",         "name": "VCC+",         "type": "power_in",-        "description": "Positive power supply terminal; operates at \u00b12.5 V to \u00b115 V dual supply or 5 V to 32 V single supply, maximum 33 V between VCC+ and VCC-."+        "description": "Positive power supply terminal; operates at ±2.5 V to ±15 V dual supply or 5 V to 32 V single supply, maximum 33 V between VCC+ and VCC-."       },       {         "number": "8",         "name": "NULL",         "type": "passive",-        "description": "Offset null adjustment terminal; connect 10 k\u03a9 potentiometer between pins 8 and 1 with wiper to VCC- for input offset voltage correction."+        "description": "Offset null adjustment terminal; connect 10 kΩ potentiometer between pins 8 and 1 with wiper to VCC- for input offset voltage correction."       }     ],     "provenance": {@@ -145,6 +145,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ths4001id.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ths4001id-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b604cb33fd03db30c937bc0e75e79730fc6621083429b47e7c89867f76a5da6a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -130,7 +130,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ths4001id.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ths4001id-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b604cb33fd03db30c937bc0e75e79730fc6621083429b47e7c89867f76a5da6a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -177,4 +217,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}