← Commit history
td1660: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "TD1660",+ "manufacturer": "Techcode Semicon",+ "package": "ESOP-8",+ "pin_count": 8,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "td1660.kicad_sym",+ "footprint": "td1660.kicad_mod",+ "model_3d": "td1660-etched.glb",+ "model_3d_plain": "td1660.glb",+ "model_3d_step": "td1660-etched.step",+ "model_3d_step_plain": "td1660.step",+ "lbr": "td1660.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "output",+ "description": "Switch node. Output from the internal high-side power MOSFET (RDS(ON) typ 250mΩ). Requires a low-VF Schottky rectifier to ground placed close to the pin to reduce switching spikes. Absolute max: -0.5V to VIN+0.5V."+ },+ {+ "number": "2",+ "name": "EN",+ "type": "input",+ "description": "Enable input (positive logic). Pull above rising threshold (typ 1.5V, spec 1.3V-2.2V) or leave floating to enable; pull below falling threshold (~1.2V) to shut down. 200mV hysteresis. Absolute max: -0.3V to +5V."+ },+ {+ "number": "3",+ "name": "COMP",+ "type": "output",+ "description": "Compensation node. Output of the internal Gm error amplifier; connect an external series R-C (and optional second cap) to set loop pole/zero. COMP is clamped internally between 0.9V and 2.0V; do not drive above 2.6V."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback input to the error amplifier. Connect a resistive divider from VOUT to GND; the divider node is compared to the internal 0.8V reference (0.780V-0.820V) to set the regulated output voltage (0.8V to 52V)."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return. Also the exposed thermal pad on the ESOP-8 package - connect to the GND plane for optimal thermal performance. Route close to the output capacitor and away from high-current switch paths."+ },+ {+ "number": "6",+ "name": "FREQ",+ "type": "input",+ "description": "Switching-frequency program input. Connect a resistor RFREQ from this pin to GND to set the oscillator frequency, per RFREQ(kΩ) = 100000/fS(kHz) − 5 (e.g. 195kΩ → 500kHz; 150kΩ → ~700kHz). Programmable up to 1MHz."+ },+ {+ "number": "7",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply, 9V to 60V (abs max 60V). Powers the internal control circuitry, bootstrap regulator, and high-side power MOSFET. UVLO rising threshold typ 7.2V (0.5V hysteresis). Place a decoupling capacitor to GND close to this pin."+ },+ {+ "number": "8",+ "name": "BST",+ "type": "power_in",+ "description": "Bootstrap. Positive supply for the internal floating high-side MOSFET driver. Connect a bypass capacitor (typ 0.1μF) between BST and SW; internally regulated to ~5V above SW. BST-to-SW abs max +5V."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}