← Commit history

Initial commit: component/td1660

Ray ·7965b43ee4 ·
2 files changed +82
README.mdadded+48
@@ -0,0 +1,48 @@+# TD1660++**Techcode Semicon** · DC-DC Converters · ESOP-8++TD1660 from Techcode Semicon, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switch node. Output from the internal high-side power MOSFET (RDS(ON) typ 250mΩ). Requires a low-VF Schottky rectifier to ground placed close to the pin to reduce switching spikes. Absolute max: -0.5V to VIN+0.5V. |+| 2 | EN | input | Enable input (positive logic). Pull above rising threshold (typ 1.5V, spec 1.3V-2.2V) or leave floating to enable; pull below falling threshold (~1.2V) to shut down. 200mV hysteresis. Absolute max: -0.3V to +5V. |+| 3 | COMP | output | Compensation node. Output of the internal Gm error amplifier; connect an external series R-C (and optional second cap) to set loop pole/zero. COMP is clamped internally between 0.9V and 2.0V; do not drive above 2.6V. |+| 4 | FB | input | Feedback input to the error amplifier. Connect a resistive divider from VOUT to GND; the divider node is compared to the internal 0.8V reference (0.780V-0.820V) to set the regulated output voltage (0.8V to 52V). |+| 5 | GND | power_in | Ground return. Also the exposed thermal pad on the ESOP-8 package - connect to the GND plane for optimal thermal performance. Route close to the output capacitor and away from high-current switch paths. |+| 6 | FREQ | input | Switching-frequency program input. Connect a resistor RFREQ from this pin to GND to set the oscillator frequency, per RFREQ(kΩ) = 100000/fS(kHz) − 5 (e.g. 195kΩ → 500kHz; 150kΩ → ~700kHz). Programmable up to 1MHz. |+| 7 | VIN | power_in | Input supply, 9V to 60V (abs max 60V). Powers the internal control circuitry, bootstrap regulator, and high-side power MOSFET. UVLO rising threshold typ 7.2V (0.5V hysteresis). Place a decoupling capacitor to GND close to this pin. |+| 8 | BST | power_in | Bootstrap. Positive supply for the internal floating high-side MOSFET driver. Connect a bypass capacitor (typ 0.1μF) between BST and SW; internally regulated to ~5V above SW. BST-to-SW abs max +5V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Techcode Semicon |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `TD1660M`+- `TD1660MR`++## CAD (KiCad official)++- Symbol: `TD1660`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Techcode Semicon datasheet](docs/td1660-datasheet.pdf) (None pp, sha256 `67a24a62ca900eb4`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/td1660-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "td1660",+  "version": "0.1.0",+  "type": "component",+  "description": "Techcode Semicon DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "td1660"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "td1660.kicad_sym",+    "td1660.kicad_mod",+    "td1660.glb",+    "td1660.step",+    "td1660.lbr",+    "docs/hero.png",+    "docs/td1660-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file