TCAN1145DRQ1

@@ -1,13 +1,180 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "tcan1145drq1",+  "title": "TCAN1145DRQ1",+  "brief": "Texas Instruments CAN ICs, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments CAN ICs, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "comm-uart",     "tcan1145drq1"   ],+  "component": {+    "mpn": "TCAN1145DRQ1",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-14",+    "pin_count": 14,+    "category": "Comm/UART",+    "subcategory": "CAN ICs",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302220500_Texas-Instruments-TCAN1145DRQ1_C3234148.pdf",+    "parts": {+      "symbol": "tcan1145drq1.kicad_sym",+      "footprint": "tcan1145drq1.kicad_mod",+      "model_3d": "tcan1145drq1.glb",+      "model_3d_step": "tcan1145drq1.step",+      "lbr": "tcan1145drq1.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "TXD",+        "type": "input",+        "description": "CAN transmit data input from the MCU. Low drives a dominant bus state; high (or floating with internal pull-up) leaves the bus recessive."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground return. The exposed thermal pad on the DMT (VSON) variant must also be soldered to GND."+      },+      {+        "number": "3",+        "name": "VCC",+        "type": "power_in",+        "description": "5V supply for the CAN bus transceiver core. Nominal 4.5V-5.5V per recommended operating conditions."+      },+      {+        "number": "4",+        "name": "RXD",+        "type": "output",+        "description": "CAN receive data output to the MCU. Tri-state; low = dominant bus, high = recessive bus."+      },+      {+        "number": "5",+        "name": "VIO",+        "type": "power_in",+        "description": "Digital I/O rail for level shifting to the MCU. Supports 1.8V-5V to match the host processor's I/O voltage."+      },+      {+        "number": "6",+        "name": "nINT/SDO",+        "type": "output",+        "description": "Muxed digital output. Acts as SPI serial-data-out (SDO) while nCS is low; becomes the active-low interrupt (nINT) output when nCS is high."+      },+      {+        "number": "7",+        "name": "INH/LIMP",+        "type": "output",+        "description": "High-voltage inhibit output used to enable/disable the system voltage regulator and power rails. On TCAN1144-Q1 and TCAN1146-Q1 this pin can be configured as a limp-home output; on TCAN1145-Q1 it functions as INH only."+      },+      {+        "number": "8",+        "name": "SCLK",+        "type": "input",+        "description": "SPI serial clock input from the MCU. Clocks SDI in and SDO out on the appropriate edges."+      },+      {+        "number": "9",+        "name": "WAKE",+        "type": "input",+        "description": "High-voltage local wake-up input. Edge on this pin wakes the device from sleep. Absolute voltage range \u221218V to +42V."+      },+      {+        "number": "10",+        "name": "VSUP",+        "type": "power_in",+        "description": "High-voltage battery supply input. Feeds the INH and wake circuitry directly from the vehicle battery rail."+      },+      {+        "number": "11",+        "name": "SDI",+        "type": "input",+        "description": "SPI serial data input from the MCU. Sampled on SCLK edges while nCS is asserted low."+      },+      {+        "number": "12",+        "name": "CANL",+        "type": "bidirectional",+        "description": "Low-side CAN bus I/O. Driven low in the dominant state and biased to VCC/2 in the recessive state. \u00b158V bus fault protection."+      },+      {+        "number": "13",+        "name": "CANH",+        "type": "bidirectional",+        "description": "High-side CAN bus I/O. Driven high in the dominant state and biased to VCC/2 in the recessive state. \u00b158V bus fault protection."+      },+      {+        "number": "14",+        "name": "nCS",+        "type": "input",+        "description": "Active-low SPI chip-select input from the MCU. Enables SPI transactions and selects the nINT/SDO pin function."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302220500_Texas-Instruments-TCAN1145DRQ1_C3234148.pdf",+        "pages": 116,+        "sha256": "276a9067cc1d77a4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "SOIC-14",+      "Category": "Comm/UART",+      "Pins": "14"+    }+  },+  "variants": [+    {+      "mpn": "TCAN1145DRQ1D",+      "kind": "packaging"+    },+    {+      "mpn": "TCAN1145DRQ1",+      "kind": "packaging"+    },+    {+      "mpn": "TCAN1145DRQ1DMT",+      "kind": "packaging"+    },+    {+      "mpn": "TCAN1145DRQ1DYY",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "tcan1145drq1"+  ],+  "discovery_pitch": "TCAN1145DRQ1 (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +192,5 @@     "docs/tcan1145drq1-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file