component
TCA9548ARGERQ1
Public Made by Adomby adom
Texas Instruments Signal Switches, Multiplexers, Decoders, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+62@@ -0,0 +1,62 @@+# TCA9548ARGERQ1++**Texas Instruments** · Signal Switches, Multiplexers, Decoders · VQFN-24-EP(4x4)++TCA9548ARGERQ1 from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SD0 | bidirectional | Serial data 0; connect to VDPU0 through a pull-up resistor |+| 2 | SC0 | bidirectional | Serial clock 0; connect to VDPU0 through a pull-up resistor |+| 3 | SD1 | bidirectional | Serial data 1; connect to VDPU1 through a pull-up resistor |+| 4 | SC1 | bidirectional | Serial clock 1; connect to VDPU1 through a pull-up resistor |+| 5 | SD2 | bidirectional | Serial data 2; connect to VDPU2 through a pull-up resistor |+| 6 | SC2 | bidirectional | Serial clock 2; connect to VDPU2 through a pull-up resistor |+| 7 | SD3 | bidirectional | Serial data 3; connect to VDPU3 through a pull-up resistor |+| 8 | SC3 | bidirectional | Serial clock 3; connect to VDPU3 through a pull-up resistor |+| 9 | GND | power_in | Ground reference voltage |+| 10 | SD4 | bidirectional | Serial data 4; connect to VDPU4 through a pull-up resistor |+| 11 | SC4 | bidirectional | Serial clock 4; connect to VDPU4 through a pull-up resistor |+| 12 | SD5 | bidirectional | Serial data 5; connect to VDPU5 through a pull-up resistor |+| 13 | SC5 | bidirectional | Serial clock 5; connect to VDPU5 through a pull-up resistor |+| 14 | SD6 | bidirectional | Serial data 6; connect to VDPU6 through a pull-up resistor |+| 15 | SC6 | bidirectional | Serial clock 6; connect to VDPU6 through a pull-up resistor |+| 16 | SD7 | bidirectional | Serial data 7; connect to VDPU7 through a pull-up resistor |+| 17 | SC7 | bidirectional | Serial clock 7; connect to VDPU7 through a pull-up resistor |+| 18 | A2 | input | Address input 2; connect directly to VCC or ground |+| 19 | SCL | bidirectional | Serial clock bus; connect to VDPUM through a pull-up resistor |+| 20 | SDA | bidirectional | Serial data bus; connect to VDPUM through a pull-up resistor |+| 21 | VCC | power_in | Power supply voltage; operating range 1.65 V to 5.25 V |+| 22 | A0 | input | Address input 0; connect directly to VCC or ground |+| 23 | A1 | input | Address input 1; connect directly to VCC or ground |+| 24 | RESET | input | Active-low reset input; assert low minimum 6 ns to reset device and deselect all channels |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Logic |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `TCA9548ARGERQ1`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tca9548argerq1-etched.step` / `tca9548argerq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tca9548argerq1.step` / `tca9548argerq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tca9548a-q1) (35 pp, sha256 `41f9c041733f8070`, retrieved 2026-09-25, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tca9548argerq1-datasheet.pdf)
page.jsonadded+260@@ -0,0 +1,260 @@+{+ "slug": "tca9548argerq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Signal Switches, Multiplexers, Decoders, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "tca9548argerq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tca9548argerq1.kicad_sym",+ "tca9548argerq1.kicad_mod",+ "tca9548argerq1.glb",+ "tca9548argerq1.step",+ "tca9548argerq1.lbr",+ "docs/hero.png",+ "docs/tca9548argerq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TCA9548ARGERQ1",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Logic",+ "subcategory": "Signal Switches, Multiplexers, Decoders",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tca9548a-q1",+ "parts": {+ "symbol": "tca9548argerq1.kicad_sym",+ "footprint": "tca9548argerq1.kicad_mod",+ "model_3d": "tca9548argerq1-etched.glb",+ "model_3d_plain": "tca9548argerq1.glb",+ "model_3d_step": "tca9548argerq1-etched.step",+ "model_3d_step_plain": "tca9548argerq1.step",+ "lbr": "tca9548argerq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2674697",+ "digikey": "296-TCA9548ARGERQ1TR-ND",+ "mouser": "595-TCA9548ARGERQ1"+ },+ "distributor_check": {+ "checked_at": "2026-09-25T14:41:07Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TCA9548ARGERQ1TR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TCA9548ARGERQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SD0",+ "type": "bidirectional",+ "description": "Serial data 0; connect to VDPU0 through a pull-up resistor"+ },+ {+ "number": "2",+ "name": "SC0",+ "type": "bidirectional",+ "description": "Serial clock 0; connect to VDPU0 through a pull-up resistor"+ },+ {+ "number": "3",+ "name": "SD1",+ "type": "bidirectional",+ "description": "Serial data 1; connect to VDPU1 through a pull-up resistor"+ },+ {+ "number": "4",+ "name": "SC1",+ "type": "bidirectional",+ "description": "Serial clock 1; connect to VDPU1 through a pull-up resistor"+ },+ {+ "number": "5",+ "name": "SD2",+ "type": "bidirectional",+ "description": "Serial data 2; connect to VDPU2 through a pull-up resistor"+ },+ {+ "number": "6",+ "name": "SC2",+ "type": "bidirectional",+ "description": "Serial clock 2; connect to VDPU2 through a pull-up resistor"+ },+ {+ "number": "7",+ "name": "SD3",+ "type": "bidirectional",+ "description": "Serial data 3; connect to VDPU3 through a pull-up resistor"+ },+ {+ "number": "8",+ "name": "SC3",+ "type": "bidirectional",+ "description": "Serial clock 3; connect to VDPU3 through a pull-up resistor"+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference voltage"+ },+ {+ "number": "10",+ "name": "SD4",+ "type": "bidirectional",+ "description": "Serial data 4; connect to VDPU4 through a pull-up resistor"+ },+ {+ "number": "11",+ "name": "SC4",+ "type": "bidirectional",+ "description": "Serial clock 4; connect to VDPU4 through a pull-up resistor"+ },+ {+ "number": "12",+ "name": "SD5",+ "type": "bidirectional",+ "description": "Serial data 5; connect to VDPU5 through a pull-up resistor"+ },+ {+ "number": "13",+ "name": "SC5",+ "type": "bidirectional",+ "description": "Serial clock 5; connect to VDPU5 through a pull-up resistor"+ },+ {+ "number": "14",+ "name": "SD6",+ "type": "bidirectional",+ "description": "Serial data 6; connect to VDPU6 through a pull-up resistor"+ },+ {+ "number": "15",+ "name": "SC6",+ "type": "bidirectional",+ "description": "Serial clock 6; connect to VDPU6 through a pull-up resistor"+ },+ {+ "number": "16",+ "name": "SD7",+ "type": "bidirectional",+ "description": "Serial data 7; connect to VDPU7 through a pull-up resistor"+ },+ {+ "number": "17",+ "name": "SC7",+ "type": "bidirectional",+ "description": "Serial clock 7; connect to VDPU7 through a pull-up resistor"+ },+ {+ "number": "18",+ "name": "A2",+ "type": "input",+ "description": "Address input 2; connect directly to VCC or ground"+ },+ {+ "number": "19",+ "name": "SCL",+ "type": "bidirectional",+ "description": "Serial clock bus; connect to VDPUM through a pull-up resistor"+ },+ {+ "number": "20",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data bus; connect to VDPUM through a pull-up resistor"+ },+ {+ "number": "21",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply voltage; operating range 1.65 V to 5.25 V"+ },+ {+ "number": "22",+ "name": "A0",+ "type": "input",+ "description": "Address input 0; connect directly to VCC or ground"+ },+ {+ "number": "23",+ "name": "A1",+ "type": "input",+ "description": "Address input 1; connect directly to VCC or ground"+ },+ {+ "number": "24",+ "name": "RESET",+ "type": "input",+ "description": "Active-low reset input; assert low minimum 6 ns to reset device and deselect all channels"+ },+ {+ "number": "25",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 25 added from the footprint"+ ],+ "pages_sent": 35,+ "cost_usd": 0.3198,+ "at": "2026-09-25T14:40:48"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tca9548a-q1",+ "pages": 35,+ "sha256": "41f9c041733f8070",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}