component
TCA9543APWR
Public Made by Adomby adom
Texas Instruments Signal Switches, Multiplexers, Decoders, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# TCA9543APWR++**Texas Instruments** · Signal Switches, Multiplexers, Decoders · TSSOP-14++TCA9543APWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0 | input | Address input 0 connected directly to VCC or ground for hardware slave address selection. |+| 2 | A1 | input | Address input 1 connected directly to VCC or ground for hardware slave address selection. |+| 3 | RESET | input | Active-low reset input that resets the I2C state machine and deselects both channels when held low for minimum tWL of 4 ns. |+| 4 | INT0 | input | Active-low interrupt input 0 for channel 0 slaves with required low-level pulse duration tPWRL of 1 µs. |+| 5 | SD0 | bidirectional | Serial data 0 line for channel 0 I2C communication connected to pull-up voltage VDPU0 through pull-up resistor. |+| 6 | SC0 | bidirectional | Serial clock 0 line for channel 0 I2C communication connected to pull-up voltage VDPU0 through pull-up resistor. |+| 7 | GND | power_in | Ground reference voltage. |+| 8 | INT1 | input | Active-low interrupt input 1 for channel 1 slaves with required low-level pulse duration tPWRL of 1 µs. |+| 9 | SD1 | bidirectional | Serial data 1 line for channel 1 I2C communication connected to pull-up voltage VDPU1 through pull-up resistor. |+| 10 | SC1 | bidirectional | Serial clock 1 line for channel 1 I2C communication connected to pull-up voltage VDPU1 through pull-up resistor. |+| 11 | INT | output | Active-low interrupt output acting as AND of INT1 and INT0 inputs, connected to pull-up voltage VDPUM through pull-up resistor. |+| 12 | SCL | bidirectional | Serial clock line from I2C/SMBus master connected to pull-up voltage VDPUM through pull-up resistor. |+| 13 | SDA | bidirectional | Serial data line from I2C/SMBus master connected to pull-up voltage VDPUM through pull-up resistor. |+| 14 | VCC | power_in | Supply power voltage input operating range 1.65 V to 5.5 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-14 |+| Category | Logic |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `TCA9543APWR`+- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`+- 3D model: TSSOP-14 (KiCad packages3D, STEP)+- 3D model files: `tca9543apwr-etched.step` / `tca9543apwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tca9543apwr.step` / `tca9543apwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tca9543a.pdf) (34 pp, sha256 `dfa2c184725031a8`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tca9543apwr-datasheet.pdf)
page.jsonadded+177@@ -0,0 +1,177 @@+{+ "slug": "tca9543apwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Signal Switches, Multiplexers, Decoders, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "tca9543apwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tca9543apwr.kicad_sym",+ "tca9543apwr.kicad_mod",+ "tca9543apwr.glb",+ "tca9543apwr.step",+ "tca9543apwr.lbr",+ "docs/hero.png",+ "docs/tca9543apwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TCA9543APWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-14",+ "pin_count": 14,+ "category": "Logic",+ "subcategory": "Signal Switches, Multiplexers, Decoders",+ "datasheet": "https://www.ti.com/lit/ds/symlink/tca9543a.pdf",+ "parts": {+ "symbol": "tca9543apwr.kicad_sym",+ "footprint": "tca9543apwr.kicad_mod",+ "model_3d": "tca9543apwr-etched.glb",+ "model_3d_plain": "tca9543apwr.glb",+ "model_3d_step": "tca9543apwr-etched.step",+ "model_3d_step_plain": "tca9543apwr.step",+ "lbr": "tca9543apwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2653307"+ },+ "pins": [+ {+ "number": "1",+ "name": "A0",+ "type": "input",+ "description": "Address input 0 connected directly to VCC or ground for hardware slave address selection."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Address input 1 connected directly to VCC or ground for hardware slave address selection."+ },+ {+ "number": "3",+ "name": "RESET",+ "type": "input",+ "description": "Active-low reset input that resets the I2C state machine and deselects both channels when held low for minimum tWL of 4 ns."+ },+ {+ "number": "4",+ "name": "INT0",+ "type": "input",+ "description": "Active-low interrupt input 0 for channel 0 slaves with required low-level pulse duration tPWRL of 1 µs."+ },+ {+ "number": "5",+ "name": "SD0",+ "type": "bidirectional",+ "description": "Serial data 0 line for channel 0 I2C communication connected to pull-up voltage VDPU0 through pull-up resistor."+ },+ {+ "number": "6",+ "name": "SC0",+ "type": "bidirectional",+ "description": "Serial clock 0 line for channel 0 I2C communication connected to pull-up voltage VDPU0 through pull-up resistor."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference voltage."+ },+ {+ "number": "8",+ "name": "INT1",+ "type": "input",+ "description": "Active-low interrupt input 1 for channel 1 slaves with required low-level pulse duration tPWRL of 1 µs."+ },+ {+ "number": "9",+ "name": "SD1",+ "type": "bidirectional",+ "description": "Serial data 1 line for channel 1 I2C communication connected to pull-up voltage VDPU1 through pull-up resistor."+ },+ {+ "number": "10",+ "name": "SC1",+ "type": "bidirectional",+ "description": "Serial clock 1 line for channel 1 I2C communication connected to pull-up voltage VDPU1 through pull-up resistor."+ },+ {+ "number": "11",+ "name": "INT",+ "type": "output",+ "description": "Active-low interrupt output acting as AND of INT1 and INT0 inputs, connected to pull-up voltage VDPUM through pull-up resistor."+ },+ {+ "number": "12",+ "name": "SCL",+ "type": "bidirectional",+ "description": "Serial clock line from I2C/SMBus master connected to pull-up voltage VDPUM through pull-up resistor."+ },+ {+ "number": "13",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data line from I2C/SMBus master connected to pull-up voltage VDPUM through pull-up resistor."+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply power voltage input operating range 1.65 V to 5.5 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 34,+ "cost_usd": 0.2795,+ "at": "2026-09-23T07:53:59"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/tca9543a.pdf",+ "pages": 34,+ "sha256": "dfa2c184725031a8",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}