tca6416artwr

@@ -33,5 +33,180 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "TCA6416ARTWR",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "I/O Expanders",+    "parts": {+      "symbol": "tca6416artwr.kicad_sym",+      "footprint": "tca6416artwr.kicad_mod",+      "model_3d": "tca6416artwr-etched.glb",+      "model_3d_plain": "tca6416artwr.glb",+      "model_3d_step": "tca6416artwr-etched.step",+      "model_3d_step_plain": "tca6416artwr.step",+      "lbr": "tca6416artwr.lbr"+    },+    "pins": [+      {+        "number": "22",+        "name": "INT",+        "type": "output",+        "description": "Active-low interrupt output. Open-drain; connect to VCCI or VCCP through a pull-up resistor. Asserted when a P-port input changes state."+      },+      {+        "number": "23",+        "name": "VCCI",+        "type": "power_in",+        "description": "Supply voltage for the I2C-bus side (1.65 V to 5.5 V). Connect directly to the supply voltage of the external I2C controller."+      },+      {+        "number": "24",+        "name": "RESET",+        "type": "input",+        "description": "Active-low reset input. Connect to VCCI or VCCP through a pull-up resistor if no active connection is used. Resets registers to default power-on values."+      },+      {+        "number": "1",+        "name": "P00",+        "type": "bidirectional",+        "description": "P-port 0 bit 0. Push-pull I/O structure. Configured as an input at power-on. Referenced to VCCP (1.65 V to 5.5 V)."+      },+      {+        "number": "2",+        "name": "P01",+        "type": "bidirectional",+        "description": "P-port 0 bit 1. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "3",+        "name": "P02",+        "type": "bidirectional",+        "description": "P-port 0 bit 2. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "4",+        "name": "P03",+        "type": "bidirectional",+        "description": "P-port 0 bit 3. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "5",+        "name": "P04",+        "type": "bidirectional",+        "description": "P-port 0 bit 4. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "6",+        "name": "P05",+        "type": "bidirectional",+        "description": "P-port 0 bit 5. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "7",+        "name": "P06",+        "type": "bidirectional",+        "description": "P-port 0 bit 6. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "8",+        "name": "P07",+        "type": "bidirectional",+        "description": "P-port 0 bit 7. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device (both VCCI and VCCP domains)."+      },+      {+        "number": "10",+        "name": "P10",+        "type": "bidirectional",+        "description": "P-port 1 bit 0. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "11",+        "name": "P11",+        "type": "bidirectional",+        "description": "P-port 1 bit 1. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "12",+        "name": "P12",+        "type": "bidirectional",+        "description": "P-port 1 bit 2. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "13",+        "name": "P13",+        "type": "bidirectional",+        "description": "P-port 1 bit 3. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "14",+        "name": "P14",+        "type": "bidirectional",+        "description": "P-port 1 bit 4. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "15",+        "name": "P15",+        "type": "bidirectional",+        "description": "P-port 1 bit 5. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "16",+        "name": "P16",+        "type": "bidirectional",+        "description": "P-port 1 bit 6. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "17",+        "name": "P17",+        "type": "bidirectional",+        "description": "P-port 1 bit 7. Push-pull I/O structure. Configured as an input at power-on."+      },+      {+        "number": "18",+        "name": "ADDR",+        "type": "input",+        "description": "I2C slave-address select input. Connect directly to VCCP or GND to select one of two addresses, allowing two TCA6416A devices on the same bus."+      },+      {+        "number": "19",+        "name": "SCL",+        "type": "input",+        "description": "I2C/SMBus serial clock input. Connect to VCCI through a pull-up resistor. Supports 100 kHz standard mode and 400 kHz fast mode."+      },+      {+        "number": "20",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C/SMBus serial data line. Open-drain; connect to VCCI through a pull-up resistor."+      },+      {+        "number": "21",+        "name": "VCCP",+        "type": "power_in",+        "description": "Supply voltage for the P-port I/O side of the TCA6416A (1.65 V to 5.5 V). Independent from VCCI to allow voltage-level translation."+      },+      {+        "number": "25",+        "name": "Thermal Pad",+        "type": "passive",+        "description": "Exposed thermal/die pad on the underside of the WQFN package. Connect to GND for best thermal performance."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}