component
TB67S279FTG
Public Made by Adomby adom
TOSHIBA Stepper Motor Driver, VQFN-48-EP(7x7). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+362−8@@ -1,13 +1,372 @@ {+ "schema_version": 1,+ "type": "component", "slug": "tb67s279ftg",+ "title": "TB67S279FTG",+ "brief": "TOSHIBA Stepper Motor Driver, VQFN-48-EP(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "TOSHIBA Stepper Motor Driver, VQFN-48-EP(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "motor driver ics", "tb67s279ftg" ],+ "component": {+ "mpn": "TB67S279FTG",+ "manufacturer": "TOSHIBA",+ "package": "VQFN-48-EP(7x7)",+ "pin_count": 48,+ "category": "Motor Driver ICs",+ "subcategory": "Stepper Motor Driver",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588927815941574656",+ "parts": {+ "symbol": "tb67s279ftg.kicad_sym",+ "footprint": "tb67s279ftg.kicad_mod",+ "model_3d": "tb67s279ftg.glb",+ "model_3d_step": "tb67s279ftg.step",+ "lbr": "tb67s279ftg.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "AGC0",+ "type": "input",+ "description": "Active Gain Control setup pin No.0. Multi-state logic input (VCC, GND, VCC-100 k\u03a9 pull-up, or GND-100 k\u03a9 pull-down; \u00b120% resistor tolerance) that selects AGC operating mode together with AGC1."+ },+ {+ "number": "2",+ "name": "AGC1",+ "type": "input",+ "description": "Active Gain Control setup pin No.1. Multi-state logic input paired with AGC0 to configure AGC operating mode."+ },+ {+ "number": "3",+ "name": "CLIM0",+ "type": "input",+ "description": "AGC current limiter setup pin No.0. Multi-state input that, with CLIM1, sets the maximum motor current limit under AGC control."+ },+ {+ "number": "4",+ "name": "CLIM1",+ "type": "input",+ "description": "AGC current limiter setup pin No.1. Multi-state input paired with CLIM0 for AGC current limit selection."+ },+ {+ "number": "5",+ "name": "FLIM",+ "type": "input",+ "description": "AGC frequency limiter setup pin. Multi-state input that programs the maximum AGC update frequency."+ },+ {+ "number": "6",+ "name": "BOOST",+ "type": "input",+ "description": "AGC current boost setup pin. Multi-state input that enables/scales the transient current boost applied by AGC."+ },+ {+ "number": "7",+ "name": "LTH",+ "type": "input",+ "description": "AGC threshold setup pin. Multi-state input that sets the AGC decision threshold."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Signal/logic ground reference (0 V). Tie to the PCB ground plane; use a single-point external termination together with the other GND pins and thermal pad."+ },+ {+ "number": "9",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave open - do not connect any PCB trace."+ },+ {+ "number": "10",+ "name": "VMA",+ "type": "power_in",+ "description": "Ach motor power supply input (VM, up to 50 V, 2.0 A). Bond both VMA pins together at the nearest point of the driver and decouple locally."+ },+ {+ "number": "11",+ "name": "VMA",+ "type": "power_in",+ "description": "Ach motor power supply input (VM). Second VMA pad; must be shorted to pin 10 at the driver."+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave open."+ },+ {+ "number": "13",+ "name": "OUTA+",+ "type": "output",+ "description": "Ach motor output (+). H-bridge output to motor coil A (positive terminal), 2.0 A max. Bond both OUTA+ pads together at the driver."+ },+ {+ "number": "14",+ "name": "OUTA+",+ "type": "output",+ "description": "Ach motor output (+). Second OUTA+ pad; must be tied to pin 13."+ },+ {+ "number": "15",+ "name": "RSAGND",+ "type": "power_in",+ "description": "Ach motor power ground / sense return. Return path for the Ach H-bridge; ACDS senses current internally, no external sense resistor required."+ },+ {+ "number": "16",+ "name": "RSAGND",+ "type": "power_in",+ "description": "Ach motor power ground / sense return. Second RSAGND pad; tie to pin 15 at the driver."+ },+ {+ "number": "17",+ "name": "OUTA-",+ "type": "output",+ "description": "Ach motor output (-). H-bridge output to motor coil A (negative terminal), 2.0 A max."+ },+ {+ "number": "18",+ "name": "OUTA-",+ "type": "output",+ "description": "Ach motor output (-). Second OUTA- pad; tie to pin 17."+ },+ {+ "number": "19",+ "name": "OUTB-",+ "type": "output",+ "description": "Bch motor output (-). H-bridge output to motor coil B (negative terminal), 2.0 A max."+ },+ {+ "number": "20",+ "name": "OUTB-",+ "type": "output",+ "description": "Bch motor output (-). Second OUTB- pad; tie to pin 19."+ },+ {+ "number": "21",+ "name": "RSBGND",+ "type": "power_in",+ "description": "Bch motor power ground / sense return. Return path for the Bch H-bridge; ACDS provides sense-resistor-less current control."+ },+ {+ "number": "22",+ "name": "RSBGND",+ "type": "power_in",+ "description": "Bch motor power ground / sense return. Second RSBGND pad; tie to pin 21."+ },+ {+ "number": "23",+ "name": "OUTB+",+ "type": "output",+ "description": "Bch motor output (+). H-bridge output to motor coil B (positive terminal), 2.0 A max."+ },+ {+ "number": "24",+ "name": "OUTB+",+ "type": "output",+ "description": "Bch motor output (+). Second OUTB+ pad; tie to pin 23."+ },+ {+ "number": "25",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave open."+ },+ {+ "number": "26",+ "name": "VMB",+ "type": "power_in",+ "description": "Bch motor power supply input (VM, up to 50 V, 2.0 A). Tie both VMB pins together at the driver and decouple locally."+ },+ {+ "number": "27",+ "name": "VMB",+ "type": "power_in",+ "description": "Bch motor power supply input (VM). Second VMB pad; must be shorted to pin 26."+ },+ {+ "number": "28",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave open."+ },+ {+ "number": "29",+ "name": "GND",+ "type": "power_in",+ "description": "Signal/logic ground reference (0 V). Tie to the PCB ground plane at a single common point with other GND pins and the thermal pad."+ },+ {+ "number": "30",+ "name": "GND",+ "type": "power_in",+ "description": "Signal/logic ground reference (0 V)."+ },+ {+ "number": "31",+ "name": "VREFB",+ "type": "input",+ "description": "Bch current threshold reference. Analog voltage input that sets the peak coil-B current threshold together with the internal ACDS."+ },+ {+ "number": "32",+ "name": "VREFA",+ "type": "input",+ "description": "Ach current threshold reference. Analog voltage input that sets the peak coil-A current threshold."+ },+ {+ "number": "33",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal 5 V regulator voltage monitor pin. Bypass to GND with a local ceramic capacitor; not intended to source external loads. Tie both VCC pins together."+ },+ {+ "number": "34",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal 5 V regulator voltage monitor pin. Second VCC pad; must be tied to pin 33."+ },+ {+ "number": "35",+ "name": "OSCM",+ "type": "bidirectional",+ "description": "Internal oscillator frequency monitor and setting pin. Connect an external RC network to program the constant-current PWM chopping frequency; can also be monitored to observe the internal oscillator."+ },+ {+ "number": "36",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave open."+ },+ {+ "number": "37",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave open."+ },+ {+ "number": "38",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave open."+ },+ {+ "number": "39",+ "name": "DMODE0",+ "type": "input",+ "description": "Step resolution setting pin No.0. Logic input (VIL \u2264 0.8 V, 2.0 V \u2264 VIH \u2264 5.5 V). Combined with DMODE1/2 to select Full, Half-a, Half-b, 1/4, 1/8, 1/16, or 1/32 micro-stepping."+ },+ {+ "number": "40",+ "name": "DMODE1",+ "type": "input",+ "description": "Step resolution setting pin No.1. Logic input paired with DMODE0 and DMODE2 to select the micro-stepping resolution."+ },+ {+ "number": "41",+ "name": "DMODE2",+ "type": "input",+ "description": "Step resolution setting pin No.2. Logic input paired with DMODE0/1 to select the micro-stepping resolution."+ },+ {+ "number": "42",+ "name": "CW/CCW",+ "type": "input",+ "description": "Rotation direction select. Logic input that sets the current direction / motor rotation sense (clockwise vs counter-clockwise)."+ },+ {+ "number": "43",+ "name": "CLK",+ "type": "input",+ "description": "Step clock input. Each rising edge advances the internal electrical angle by one micro-step (as selected by DMODE0..2). Logic-level input (VIL \u2264 0.8 V, VIH 2.0-5.5 V)."+ },+ {+ "number": "44",+ "name": "ENABLE",+ "type": "input",+ "description": "Motor output enable. Logic input that turns the H-bridge outputs ON/OFF (active-high enable)."+ },+ {+ "number": "45",+ "name": "RESET",+ "type": "input",+ "description": "Electrical-angle initialize input. Logic input; when asserted, resets the internal step counter/electrical angle to the initial state."+ },+ {+ "number": "46",+ "name": "MO",+ "type": "output",+ "description": "Electrical-angle monitor output. Digital output that indicates when the internal electrical angle is at the reference (home) position - used by external logic to synchronize with the initial angle."+ },+ {+ "number": "47",+ "name": "LO1",+ "type": "output",+ "description": "Error flag output pin No.1. Open-drain-style status output that signals fault conditions (TSD/ISD/OPD/POR) in combination with LO2."+ },+ {+ "number": "48",+ "name": "LO2",+ "type": "output",+ "description": "Error flag output pin No.2. Status output paired with LO1 to encode which fault has been detected."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588927815941574656",+ "pages": null,+ "sha256": "763c07ac64dd7f34",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "TOSHIBA",+ "Package": "VQFN-48-EP(7x7)",+ "Category": "Motor Driver ICs",+ "Pins": "48"+ }+ },+ "variants": [+ {+ "mpn": "TB67S279FTG",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "tb67s279ftg"+ ],+ "discovery_pitch": "TB67S279FTG (TOSHIBA) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +384,5 @@ "docs/tb67s279ftg-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }