component
TB67S128FTG
Public Made by Adomby adom
TOSHIBA Stepper Motor Driver, VQFN-64-EP(9x9). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+101@@ -0,0 +1,101 @@+# TB67S128FTG++**TOSHIBA** · Stepper Motor Driver · VQFN-64-EP(9x9)++TB67S128FTG from TOSHIBA, in a VQFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TESTO_1 | output | Test output pin No.1 |+| 2 | TESTO_2 | output | Test output pin No.2 |+| 3 | TESTO_3 | output | Test output pin No.3 |+| 4 | SGND | power_in | Logic ground pin, connect to PCB ground pattern |+| 5 | OSCM | passive | Internal oscillator frequency monitor and setting pin, RC network connection for chopping frequency 0.64 MHz to 2.4 MHz |+| 6 | CLIM0 | input | AGC current limiter setup pin No.0, logic input VIH 2.0-5.5V VIL 0-0.8V |+| 7 | CLIM1 | input | AGC current limiter setup pin No.1, multi-state logic input VIH 2.0-5.5V VIL 0-0.8V |+| 8 | FLIM | input | AGC frequency limiter setup pin, multi-state logic input VIH 2.0-5.5V VIL 0-0.8V |+| 9 | BST | input | AGC current boost setup pin, multi-state logic input VIH 2.0-5.5V VIL 0-0.8V |+| 10 | VREF | power_in | Current threshold reference pin, analog input 0V-3.6V for motor current setting |+| 11 | IF_SEL | input | Interface select pin, logic input L=CLK mode H=Serial mode |+| 12 | RS_SEL | input | RS mode select pin, logic input L=ACDS mode H=External RS resistor mode |+| 13 | NC | unconnected | No connection pin |+| 14 | VCC | power_in | Internal regulator voltage monitor pin, 4.75V-5.25V supply voltage |+| 15 | LTH | passive | AGC threshold setup pin, connect with 100kΩ pull-down resistor to GND |+| 16 | TEST_VF | output | Test monitor output pin for 3Vf internal voltage |+| 17 | NC | unconnected | No connection pin |+| 18 | RS_A | passive | Ach current sense resistor connection pin or motor power ground pin, connect same pins together on PCB |+| 19 | RS_A | passive | Ach current sense resistor connection pin or motor power ground pin, connect same pins together on PCB |+| 20 | NC | unconnected | No connection pin |+| 21 | OUT_A+ | output | Ach motor output(+) pin, motor winding phase A positive connection |+| 22 | OUT_A+ | output | Ach motor output(+) pin, motor winding phase A positive connection |+| 23 | OUT_A- | output | Ach motor output(-) pin, motor winding phase A negative connection |+| 24 | OUT_A- | output | Ach motor output(-) pin, motor winding phase A negative connection |+| 25 | OUT_B- | output | Bch motor output(-) pin, motor winding phase B negative connection |+| 26 | OUT_B- | output | Bch motor output(-) pin, motor winding phase B negative connection |+| 27 | OUT_B+ | output | Bch motor output(+) pin, motor winding phase B positive connection |+| 28 | OUT_B+ | output | Bch motor output(+) pin, motor winding phase B positive connection |+| 29 | NC | unconnected | No connection pin |+| 30 | RS_B | passive | Bch current sense resistor connection pin or motor power ground pin, connect same pins together on PCB |+| 31 | RS_B | passive | Bch current sense resistor connection pin or motor power ground pin, connect same pins together on PCB |+| 32 | NC | unconnected | No connection pin |+| 33 | VM | power_in | Motor power supply input pin, 6.5V-44V DC motor supply voltage |+| 34 | VM | power_in | Motor power supply input pin, 6.5V-44V DC motor supply voltage |+| 35 | NC | unconnected | No connection pin |+| 36 | CPOUT | output | Charge pump output pin, boosted supply voltage 11.2V-48.7V |+| 37 | CP+ | passive | Charge pump capacitor connection pin, connect 0.022μF ceramic capacitor |+| 38 | CP- | passive | Charge pump capacitor connection pin, connect 0.22μF ceramic capacitor |+| 39 | GND | power_in | Power ground pin, connect to PCB ground pattern and solder thermal pad |+| 40 | GND | power_in | Power ground pin, connect to PCB ground pattern and solder thermal pad |+| 41 | GND | power_in | Power ground pin, connect to PCB ground pattern and solder thermal pad |+| 42 | MDT0 | input | Mixed Decay/ADMD setting pin No.0, logic input for decay mode control |+| 43 | MDT1 | input | Mixed Decay/ADMD setting pin No.1, logic input for decay mode control |+| 44 | TORQE0 | input | Torque setting pin No.0, logic input for motor torque 10-100% |+| 45 | TORQE1 | input | Torque setting pin No.1, logic input for motor torque 10-100% |+| 46 | TORQE2 | input | Torque setting pin No.2, logic input for motor torque 10-100% |+| 47 | AGC | input | Active Gain Control setup pin, logic input L=AGC OFF H=AGC ON |+| 48 | NC | unconnected | No connection pin |+| 49 | MODE0 | input | Excitation setting pin No.0, logic input for step resolution select |+| 50 | MODE1 | input | Excitation setting pin No.1, logic input for step resolution select |+| 51 | MODE2 | input | Excitation setting pin No.2, logic input for step resolution select full/half/quarter/1/8/1/16/1/32/1/64/1/128 step |+| 52 | CLK | input | Step clock input pin, 50kHz-200kHz digital input for step control |+| 53 | CW/CCW | input | Current direction setup pin, logic input L=Counter-clockwise H=Clockwise |+| 54 | STANDBY | input | Standby mode control pin, logic input L=Standby mode H=Normal operation |+| 55 | ENABLE | input | Motor output ON/OFF control pin, logic input L=Hi-Z mode H=Normal operation |+| 56 | RESET | input | Electrical angle initialize pin, logic input with 0.625μs digital filter |+| 57 | GAIN_SEL | input | Vref Gain setting pin, logic input L=1/5 gain H=1/10 gain |+| 58 | EDG_SEL | input | CLK edge setting pin, logic input L=Single edge H=Dual edge detection |+| 59 | TESTI_1 | input | Test input pin No.1, internal test signal input |+| 60 | TESTI_2 | input | Test input pin No.2, internal test signal input |+| 61 | TESTI_3 | input | Test input pin No.3, internal test signal input |+| 62 | LO0 | tri_state | Error detection flag output pin No.0, open-drain output needs 10-100kΩ pull-up |+| 63 | LO1 | tri_state | Error detection flag output pin No.1, open-drain output needs 10-100kΩ pull-up |+| 64 | MO | output | Electrical angle monitor pin, outputs motor electrical angle with pull-up resistor to VCC |+| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TOSHIBA |+| Package | VQFN-64-EP(9x9) |+| Category | Motor Driver ICs |+| Pins | 65 |++## CAD (KiCad official)++- Symbol: `TB67S128FTG`+- Footprint: `Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm`+- 3D model: VQFN-64-EP(9x9) (KiCad packages3D, STEP)+- 3D model files: `tb67s128ftg-etched.step` / `tb67s128ftg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tb67s128ftg.step` / `tb67s128ftg.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TOSHIBA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893371762937856) (49 pp, sha256 `e2c69861b4cc17dc`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tb67s128ftg-datasheet.pdf)
page.jsonadded+486@@ -0,0 +1,486 @@+{+ "slug": "tb67s128ftg",+ "version": "0.1.0",+ "type": "component",+ "description": "TOSHIBA Stepper Motor Driver, VQFN-64-EP(9x9). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "tb67s128ftg",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tb67s128ftg.kicad_sym",+ "tb67s128ftg.kicad_mod",+ "tb67s128ftg.glb",+ "tb67s128ftg.step",+ "tb67s128ftg.lbr",+ "docs/hero.png",+ "docs/tb67s128ftg-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TB67S128FTG",+ "manufacturer": "TOSHIBA",+ "package": "VQFN-64-EP(9x9)",+ "pin_count": 65,+ "category": "Motor Driver ICs",+ "subcategory": "Stepper Motor Driver",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893371762937856",+ "parts": {+ "symbol": "tb67s128ftg.kicad_sym",+ "footprint": "tb67s128ftg.kicad_mod",+ "model_3d": "tb67s128ftg-etched.glb",+ "model_3d_plain": "tb67s128ftg.glb",+ "model_3d_step": "tb67s128ftg-etched.step",+ "model_3d_step_plain": "tb67s128ftg.step",+ "lbr": "tb67s128ftg.lbr"+ },+ "distributor_links": {+ "lcsc": "C2150559"+ },+ "pins": [+ {+ "number": "1",+ "name": "TESTO_1",+ "type": "output",+ "description": "Test output pin No.1"+ },+ {+ "number": "2",+ "name": "TESTO_2",+ "type": "output",+ "description": "Test output pin No.2"+ },+ {+ "number": "3",+ "name": "TESTO_3",+ "type": "output",+ "description": "Test output pin No.3"+ },+ {+ "number": "4",+ "name": "SGND",+ "type": "power_in",+ "description": "Logic ground pin, connect to PCB ground pattern"+ },+ {+ "number": "5",+ "name": "OSCM",+ "type": "passive",+ "description": "Internal oscillator frequency monitor and setting pin, RC network connection for chopping frequency 0.64 MHz to 2.4 MHz"+ },+ {+ "number": "6",+ "name": "CLIM0",+ "type": "input",+ "description": "AGC current limiter setup pin No.0, logic input VIH 2.0-5.5V VIL 0-0.8V"+ },+ {+ "number": "7",+ "name": "CLIM1",+ "type": "input",+ "description": "AGC current limiter setup pin No.1, multi-state logic input VIH 2.0-5.5V VIL 0-0.8V"+ },+ {+ "number": "8",+ "name": "FLIM",+ "type": "input",+ "description": "AGC frequency limiter setup pin, multi-state logic input VIH 2.0-5.5V VIL 0-0.8V"+ },+ {+ "number": "9",+ "name": "BST",+ "type": "input",+ "description": "AGC current boost setup pin, multi-state logic input VIH 2.0-5.5V VIL 0-0.8V"+ },+ {+ "number": "10",+ "name": "VREF",+ "type": "power_in",+ "description": "Current threshold reference pin, analog input 0V-3.6V for motor current setting"+ },+ {+ "number": "11",+ "name": "IF_SEL",+ "type": "input",+ "description": "Interface select pin, logic input L=CLK mode H=Serial mode"+ },+ {+ "number": "12",+ "name": "RS_SEL",+ "type": "input",+ "description": "RS mode select pin, logic input L=ACDS mode H=External RS resistor mode"+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection pin"+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Internal regulator voltage monitor pin, 4.75V-5.25V supply voltage"+ },+ {+ "number": "15",+ "name": "LTH",+ "type": "passive",+ "description": "AGC threshold setup pin, connect with 100kΩ pull-down resistor to GND"+ },+ {+ "number": "16",+ "name": "TEST_VF",+ "type": "output",+ "description": "Test monitor output pin for 3Vf internal voltage"+ },+ {+ "number": "17",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection pin"+ },+ {+ "number": "18",+ "name": "RS_A",+ "type": "passive",+ "description": "Ach current sense resistor connection pin or motor power ground pin, connect same pins together on PCB"+ },+ {+ "number": "19",+ "name": "RS_A",+ "type": "passive",+ "description": "Ach current sense resistor connection pin or motor power ground pin, connect same pins together on PCB"+ },+ {+ "number": "20",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection pin"+ },+ {+ "number": "21",+ "name": "OUT_A+",+ "type": "output",+ "description": "Ach motor output(+) pin, motor winding phase A positive connection"+ },+ {+ "number": "22",+ "name": "OUT_A+",+ "type": "output",+ "description": "Ach motor output(+) pin, motor winding phase A positive connection"+ },+ {+ "number": "23",+ "name": "OUT_A-",+ "type": "output",+ "description": "Ach motor output(-) pin, motor winding phase A negative connection"+ },+ {+ "number": "24",+ "name": "OUT_A-",+ "type": "output",+ "description": "Ach motor output(-) pin, motor winding phase A negative connection"+ },+ {+ "number": "25",+ "name": "OUT_B-",+ "type": "output",+ "description": "Bch motor output(-) pin, motor winding phase B negative connection"+ },+ {+ "number": "26",+ "name": "OUT_B-",+ "type": "output",+ "description": "Bch motor output(-) pin, motor winding phase B negative connection"+ },+ {+ "number": "27",+ "name": "OUT_B+",+ "type": "output",+ "description": "Bch motor output(+) pin, motor winding phase B positive connection"+ },+ {+ "number": "28",+ "name": "OUT_B+",+ "type": "output",+ "description": "Bch motor output(+) pin, motor winding phase B positive connection"+ },+ {+ "number": "29",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection pin"+ },+ {+ "number": "30",+ "name": "RS_B",+ "type": "passive",+ "description": "Bch current sense resistor connection pin or motor power ground pin, connect same pins together on PCB"+ },+ {+ "number": "31",+ "name": "RS_B",+ "type": "passive",+ "description": "Bch current sense resistor connection pin or motor power ground pin, connect same pins together on PCB"+ },+ {+ "number": "32",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection pin"+ },+ {+ "number": "33",+ "name": "VM",+ "type": "power_in",+ "description": "Motor power supply input pin, 6.5V-44V DC motor supply voltage"+ },+ {+ "number": "34",+ "name": "VM",+ "type": "power_in",+ "description": "Motor power supply input pin, 6.5V-44V DC motor supply voltage"+ },+ {+ "number": "35",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection pin"+ },+ {+ "number": "36",+ "name": "CPOUT",+ "type": "output",+ "description": "Charge pump output pin, boosted supply voltage 11.2V-48.7V"+ },+ {+ "number": "37",+ "name": "CP+",+ "type": "passive",+ "description": "Charge pump capacitor connection pin, connect 0.022μF ceramic capacitor"+ },+ {+ "number": "38",+ "name": "CP-",+ "type": "passive",+ "description": "Charge pump capacitor connection pin, connect 0.22μF ceramic capacitor"+ },+ {+ "number": "39",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground pin, connect to PCB ground pattern and solder thermal pad"+ },+ {+ "number": "40",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground pin, connect to PCB ground pattern and solder thermal pad"+ },+ {+ "number": "41",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground pin, connect to PCB ground pattern and solder thermal pad"+ },+ {+ "number": "42",+ "name": "MDT0",+ "type": "input",+ "description": "Mixed Decay/ADMD setting pin No.0, logic input for decay mode control"+ },+ {+ "number": "43",+ "name": "MDT1",+ "type": "input",+ "description": "Mixed Decay/ADMD setting pin No.1, logic input for decay mode control"+ },+ {+ "number": "44",+ "name": "TORQE0",+ "type": "input",+ "description": "Torque setting pin No.0, logic input for motor torque 10-100%"+ },+ {+ "number": "45",+ "name": "TORQE1",+ "type": "input",+ "description": "Torque setting pin No.1, logic input for motor torque 10-100%"+ },+ {+ "number": "46",+ "name": "TORQE2",+ "type": "input",+ "description": "Torque setting pin No.2, logic input for motor torque 10-100%"+ },+ {+ "number": "47",+ "name": "AGC",+ "type": "input",+ "description": "Active Gain Control setup pin, logic input L=AGC OFF H=AGC ON"+ },+ {+ "number": "48",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection pin"+ },+ {+ "number": "49",+ "name": "MODE0",+ "type": "input",+ "description": "Excitation setting pin No.0, logic input for step resolution select"+ },+ {+ "number": "50",+ "name": "MODE1",+ "type": "input",+ "description": "Excitation setting pin No.1, logic input for step resolution select"+ },+ {+ "number": "51",+ "name": "MODE2",+ "type": "input",+ "description": "Excitation setting pin No.2, logic input for step resolution select full/half/quarter/1/8/1/16/1/32/1/64/1/128 step"+ },+ {+ "number": "52",+ "name": "CLK",+ "type": "input",+ "description": "Step clock input pin, 50kHz-200kHz digital input for step control"+ },+ {+ "number": "53",+ "name": "CW/CCW",+ "type": "input",+ "description": "Current direction setup pin, logic input L=Counter-clockwise H=Clockwise"+ },+ {+ "number": "54",+ "name": "STANDBY",+ "type": "input",+ "description": "Standby mode control pin, logic input L=Standby mode H=Normal operation"+ },+ {+ "number": "55",+ "name": "ENABLE",+ "type": "input",+ "description": "Motor output ON/OFF control pin, logic input L=Hi-Z mode H=Normal operation"+ },+ {+ "number": "56",+ "name": "RESET",+ "type": "input",+ "description": "Electrical angle initialize pin, logic input with 0.625μs digital filter"+ },+ {+ "number": "57",+ "name": "GAIN_SEL",+ "type": "input",+ "description": "Vref Gain setting pin, logic input L=1/5 gain H=1/10 gain"+ },+ {+ "number": "58",+ "name": "EDG_SEL",+ "type": "input",+ "description": "CLK edge setting pin, logic input L=Single edge H=Dual edge detection"+ },+ {+ "number": "59",+ "name": "TESTI_1",+ "type": "input",+ "description": "Test input pin No.1, internal test signal input"+ },+ {+ "number": "60",+ "name": "TESTI_2",+ "type": "input",+ "description": "Test input pin No.2, internal test signal input"+ },+ {+ "number": "61",+ "name": "TESTI_3",+ "type": "input",+ "description": "Test input pin No.3, internal test signal input"+ },+ {+ "number": "62",+ "name": "LO0",+ "type": "tri_state",+ "description": "Error detection flag output pin No.0, open-drain output needs 10-100kΩ pull-up"+ },+ {+ "number": "63",+ "name": "LO1",+ "type": "tri_state",+ "description": "Error detection flag output pin No.1, open-drain output needs 10-100kΩ pull-up"+ },+ {+ "number": "64",+ "name": "MO",+ "type": "output",+ "description": "Electrical angle monitor pin, outputs motor electrical angle with pull-up resistor to VCC"+ },+ {+ "number": "65",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Multiple pins have identical names (RS_A pins 18-19, OUT_A+ pins 21-22, OUT_A- pins 23-24, OUT_B- pi",+ "exposed pad 65 added from the footprint"+ ],+ "pages_sent": 49,+ "cost_usd": 0.6608,+ "at": "2026-09-22T12:01:47"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893371762937856",+ "pages": 49,+ "sha256": "e2c69861b4cc17dc",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 65,+ "described": 65,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}