component
TB6612FNG
Public Made by Adomby adom
Toshiba dual H-bridge motor driver, SSOP-24. Two DC motors or one stepper, 1.2 A/ch, MOSFET output, PWM. Datasheet-verified.
← Commit history
tb6612fng: backfill missing artifacts (etch, variants)
3 files changed
+22333−8
diff truncated
README.md+2@@ -48,6 +48,8 @@ A dual H-bridge motor driver in SSOP-24 that runs two DC motors or one bipolar s ## Ordering variants +Same part, different packaging or reel option.+ - `TB6612FNG (SSOP-24)` - `TB6612FNG,C,8,EL (SSOP-24, reel)`
page.json+19−8@@ -120,19 +120,19 @@ "number": "15", "name": "PWMB", "type": "input",- "description": "Channel-B PWM input; controls duty-cycle for H-SW B. CMOS-level referenced to Vcc; 200 k\u03a9 internal pull-down. Switching frequency up to 100 kHz. VIH \u2265 Vcc\u00d70.7, VIL \u2264 Vcc\u00d70.3."+ "description": "Channel-B PWM input; controls duty-cycle for H-SW B. CMOS-level referenced to Vcc; 200 kΩ internal pull-down. Switching frequency up to 100 kHz. VIH ≥ Vcc×0.7, VIL ≤ Vcc×0.3." }, { "number": "16", "name": "BIN2", "type": "input",- "description": "Channel-B logic input 2. Combined with BIN1 selects CW / CCW / short-brake / stop per the H-SW truth table. 200 k\u03a9 internal pull-down."+ "description": "Channel-B logic input 2. Combined with BIN1 selects CW / CCW / short-brake / stop per the H-SW truth table. 200 kΩ internal pull-down." }, { "number": "17", "name": "BIN1", "type": "input",- "description": "Channel-B logic input 1. Combined with BIN2 selects CW / CCW / short-brake / stop. 200 k\u03a9 internal pull-down."+ "description": "Channel-B logic input 1. Combined with BIN2 selects CW / CCW / short-brake / stop. 200 kΩ internal pull-down." }, { "number": "18",@@ -144,7 +144,7 @@ "number": "19", "name": "STBY", "type": "input",- "description": "Standby / enable. Drive high to enable both H-bridges; drive low to put the chip into standby (all outputs high-Z, power-save). 200 k\u03a9 internal pull-down, so unconnected defaults to standby."+ "description": "Standby / enable. Drive high to enable both H-bridges; drive low to put the chip into standby (all outputs high-Z, power-save). 200 kΩ internal pull-down, so unconnected defaults to standby." }, { "number": "20",@@ -156,19 +156,19 @@ "number": "21", "name": "AIN1", "type": "input",- "description": "Channel-A logic input 1. Combined with AIN2 selects CW / CCW / short-brake / stop. 200 k\u03a9 internal pull-down."+ "description": "Channel-A logic input 1. Combined with AIN2 selects CW / CCW / short-brake / stop. 200 kΩ internal pull-down." }, { "number": "22", "name": "AIN2", "type": "input",- "description": "Channel-A logic input 2. Combined with AIN1 selects CW / CCW / short-brake / stop. 200 k\u03a9 internal pull-down."+ "description": "Channel-A logic input 2. Combined with AIN1 selects CW / CCW / short-brake / stop. 200 kΩ internal pull-down." }, { "number": "23", "name": "PWMA", "type": "input",- "description": "Channel-A PWM input; controls duty-cycle for H-SW A. CMOS-level referenced to Vcc; 200 k\u03a9 internal pull-down. Switching frequency up to 100 kHz."+ "description": "Channel-A PWM input; controls duty-cycle for H-SW A. CMOS-level referenced to Vcc; 200 kΩ internal pull-down. Switching frequency up to 100 kHz." }, { "number": "24",@@ -245,6 +245,17 @@ "docs/hero.png", "docs/tb6612fng-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "tb6612fng-etched.step"+ ],+ "variants": [+ {+ "mpn": "TB6612FNG (SSOP-24)",+ "kind": "packaging"+ },+ {+ "mpn": "TB6612FNG,C,8,EL (SSOP-24, reel)",+ "kind": "packaging"+ } ] }
tb6612fng-etched.stepadded+22312@@ -0,0 +1,63031 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-09-03T23:56:53',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('part','part','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-07),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('body','body','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#38811);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#156,#235,#986,#1065,#1144,#1223,#1969,#2052,+ #5004,#5077,#9532,#9608,#10093,#10120,#10147,#10174,#10201,#10228,+ #10255,#10282,#10309,#10336,#10363,#10390,#10417,#10444,#10471,+ #10498,#10525,#10552,#10579,#10606,#10633,#10640,#10716,#10925,+ #10952,#10979,#11006,#11033,#11060,#11087,#11114,#11141,#11148,+ #11224,#11433,#11460,#11487,#11514,#11541,#11568,#11595,#11622,+ #11649,#11656,#11732,#12194,#12221,#12248,#12275,#12302,#12329,+ #12356,#12383,#12410,#12437,#12464,#12491,#12518,#12545,#12572,+ #12599,#12626,#12653,#12680,#12707,#12714,#12790,#13022,#13049,+ #13076,#13103,#13130,#13157,#13184,#13211,#13238,#13265,#13272,+ #13348,#13960,#14051,#14283,#14310,#14337,#14364,#14391,#14418,+ #14445,#14452,#14479,#14506,#14533,#14560,#14587,#14614,#14641,+ #14668,#14695,#14722,#14749,#14776,#14803,#14830,#14857,#14864,+ #14940,#15552,#15643,#15875,#15902,#15929,#15956,#15983,#16010,+ #16037,#16044,#16071,#16098,#16125,#16152,#16179,#16206,#16233,+ #16260,#16287,#16314,#16341,#16368,#16395,#16422,#16449,#16456,+ #16532,#17176,#17258,#17419,#17446,#17473,#17500,#17527,#17554,+ #17561,#17643,#17795,#17822,#17849,#17876,#17903,#17930,#17937,+ #17964,#17991,#18018,#18045,#18072,#18099,#18126,#18153,#18180,+ #18187,#18263,#18426,#18453,#18480,#18507,#18534,#18561,#18588,+ #18595,#18621,#18647,#18673,#18699,#18725,#18751,#18758,#19063,+ #19134,#19188,#19237,#19286,#19335,#19385,#19434,#19488,#19516,+ #19571,#19876,#19947,#20001,#20050,#20099,#20148,#20198,#20247,+ #20301,#20329,#20384,#20689,#20760,#20814,#20863,#20912,#20961,+ #21011,#21060,#21114,#21142,#21197,#21502,#21573,#21627,#21676,+ #21725,#21774,#21824,#21873,#21927,#21955,#22010,#22315,#22386,+ #22440,#22489,#22538,#22587,#22637,#22686,#22740,#22768,#22823,+ #23128,#23199,#23253,#23302,#23351,#23400,#23450,#23499,#23553,+ #23581,#23636,#23941,#24012,#24066,#24115,#24164,#24213,#24263,+ #24312,#24366,#24394,#24449,#24754,#24825,#24879,#24928,#24977,+ #25026,#25076,#25125,#25179,#25207,#25262,#25567,#25638,#25692,+ #25741,#25790,#25839,#25889,#25938,#25992,#26020,#26075,#26380,+ #26451,#26505,#26554,#26603,#26652,#26702,#26751,#26805,#26833,+ #26888,#27193,#27264,#27318,#27367,#27416,#27465,#27515,#27564,+ #27618,#27646,#27701,#28006,#28077,#28131,#28180,#28229,#28278,+ #28328,#28377,#28431,#28459,#28514,#28819,#28890,#28944,#28993,+ #29042,#29091,#29141,#29190,#29244,#29272,#29327,#29632,#29703,+ #29757,#29806,#29855,#29904,#29954,#30003,#30057,#30085,#30140,+ #30445,#30516,#30570,#30619,#30668,#30717,#30767,#30816,#30870,+ #30898,#30953,#31258,#31329,#31383,#31432,#31481,#31530,#31580,+ #31629,#31683,#31711,#31766,#32071,#32142,#32196,#32245,#32294,+ #32343,#32393,#32442,#32496,#32524,#32579,#32884,#32955,#33009,+ #33058,#33107,#33156,#33206,#33255,#33309,#33337,#33392,#33697,+ #33768,#33822,#33871,#33920,#33969,#34019,#34068,#34122,#34150,+ #34205,#34510,#34581,#34635,#34684,#34733,#34782,#34832,#34881,+ #34935,#34963,#35018,#35323,#35394,#35448,#35497,#35546,#35595,+ #35645,#35694,#35748,#35776,#35831,#36136,#36207,#36261,#36310,+ #36359,#36408,#36458,#36507,#36561,#36589,#36644,#36949,#37020,+ #37074,#37123,#37172,#37221,#37271,#37320,#37374,#37402,#37457,+ #37762,#37833,#37887,#37936,#37985,#38034,#38084,#38133,#38187,+ #38215,#38250,#38294,#38301,#38308,#38315,#38322,#38329,#38336,+ #38343,#38350,#38357,#38364,#38371,#38378,#38385,#38392,#38399,+ #38406,#38413,#38420,#38427,#38434,#38441,#38448,#38455,#38479,+ #38503,#38527,#38551,#38558,#38565,#38572,#38579,#38586,#38593,+ #38600,#38607,#38614,#38621,#38628,#38635,#38642,#38649,#38656,+ #38663,#38670,#38677,#38684,#38691,#38698,#38705,#38712,#38719,+ #38743,#38767,#38774,#38800));+#39 = ADVANCED_FACE('',(#40),#54,.F.);+#40 = FACE_BOUND('',#41,.F.);+#41 = EDGE_LOOP('',(#42,#76,#103,#131));+#42 = ORIENTED_EDGE('',*,*,#43,.T.);+#43 = EDGE_CURVE('',#44,#46,#48,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-2.351692590228,3.903385180455,0.1));+#46 = VERTEX_POINT('',#47);+#47 = CARTESIAN_POINT('',(2.351692590228,3.903385180455,0.1));+#48 = SURFACE_CURVE('',#49,(#53,#64),.PCURVE_S1.);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(-2.351692590228,3.903385180455,0.1));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(1.,1.110223024625E-16,0.));+#53 = PCURVE('',#54,#59);+#54 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#55,#56)+ ,(#57,#58)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.9),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#55 = CARTESIAN_POINT('',(-2.351692590228,3.903385180455,0.1));+#56 = CARTESIAN_POINT('',(-2.45,4.1,1.025));+#57 = CARTESIAN_POINT('',(2.351692590228,3.903385180455,0.1));+#58 = CARTESIAN_POINT('',(2.45,4.1,1.025));+#59 = DEFINITIONAL_REPRESENTATION('',(#60),#63);+#60 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61,#62),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,4.703385180456),.PIECEWISE_BEZIER_KNOTS.);+#61 = CARTESIAN_POINT('',(-4.10529401847E-16,1.134644232514E-17));+#62 = CARTESIAN_POINT('',(4.9,6.315182682122E-17));+#63 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#64 = PCURVE('',#65,#70);+#65 = PLANE('',#66);+#66 = AXIS2_PLACEMENT_3D('',#67,#68,#69);+#67 = CARTESIAN_POINT('',(-2.351692590228,3.903385180455,0.1));+#68 = DIRECTION('',(0.,0.,1.));+#69 = DIRECTION('',(0.516053808867,-0.856556166491,0.));+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);+#71 = LINE('',#72,#73);+#72 = CARTESIAN_POINT('',(0.,0.));+#73 = VECTOR('',#74,1.);+#74 = DIRECTION('',(0.516053808867,0.856556166491));+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#76 = ORIENTED_EDGE('',*,*,#77,.T.);+#77 = EDGE_CURVE('',#46,#78,#80,.T.);+#78 = VERTEX_POINT('',#79);+#79 = CARTESIAN_POINT('',(2.45,4.1,1.025));+#80 = SURFACE_CURVE('',#81,(#84,#91),.PCURVE_S1.);+#81 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82,#83),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#82 = CARTESIAN_POINT('',(2.351692590228,3.903385180455,0.1));+#83 = CARTESIAN_POINT('',(2.45,4.1,1.025));+#84 = PCURVE('',#54,#85);+#85 = DEFINITIONAL_REPRESENTATION('',(#86),#90);+#86 = LINE('',#87,#88);+#87 = CARTESIAN_POINT('',(4.9,-1.206114279741E-16));+#88 = VECTOR('',#89,1.);+#89 = DIRECTION('',(-8.881784197001E-16,1.));+#90 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#91 = PCURVE('',#92,#97);+#92 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#93,#94)+ ,(#95,#96+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.282842712475),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#93 = CARTESIAN_POINT('',(2.351692590228,3.903385180455,0.1));+#94 = CARTESIAN_POINT('',(2.45,4.1,1.025));+#95 = CARTESIAN_POINT('',(2.453385180455,3.801692590228,0.1));+#96 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#97 = DEFINITIONAL_REPRESENTATION('',(#98),#102);+#98 = LINE('',#99,#100);+#99 = CARTESIAN_POINT('',(3.967270879804E-16,-1.121777267727E-16));+#100 = VECTOR('',#101,1.);+#101 = DIRECTION('',(-8.141014643179E-17,1.));+#102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#103 = ORIENTED_EDGE('',*,*,#104,.F.);+#104 = EDGE_CURVE('',#105,#78,#107,.T.);+#105 = VERTEX_POINT('',#106);+#106 = CARTESIAN_POINT('',(-2.45,4.1,1.025));+#107 = SURFACE_CURVE('',#108,(#112,#119),.PCURVE_S1.);+#108 = LINE('',#109,#110);+#109 = CARTESIAN_POINT('',(-2.45,4.1,1.025));+#110 = VECTOR('',#111,1.);+#111 = DIRECTION('',(1.,1.110223024625E-16,0.));+#112 = PCURVE('',#54,#113);+#113 = DEFINITIONAL_REPRESENTATION('',(#114),#118);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-4.667304526425E-16,1.));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(1.,2.265761274745E-17));+#118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#119 = PCURVE('',#120,#125);+#120 = PLANE('',#121);+#121 = AXIS2_PLACEMENT_3D('',#122,#123,#124);+#122 = CARTESIAN_POINT('',(-2.45,4.1,1.175));+#123 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#124 = DIRECTION('',(1.,1.110223024625E-16,0.));+#125 = DEFINITIONAL_REPRESENTATION('',(#126),#130);+#126 = LINE('',#127,#128);+#127 = CARTESIAN_POINT('',(0.,-0.15));+#128 = VECTOR('',#129,1.);+#129 = DIRECTION('',(1.,0.));+#130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#131 = ORIENTED_EDGE('',*,*,#132,.F.);+#132 = EDGE_CURVE('',#44,#105,#133,.T.);+#133 = SURFACE_CURVE('',#134,(#137,#144),.PCURVE_S1.);+#134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#136),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#135 = CARTESIAN_POINT('',(-2.351692590228,3.903385180455,0.1));+#136 = CARTESIAN_POINT('',(-2.45,4.1,1.025));+#137 = PCURVE('',#54,#138);+#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);+#139 = LINE('',#140,#141);+#140 = CARTESIAN_POINT('',(-4.10529401847E-16,1.134644232514E-17));+#141 = VECTOR('',#142,1.);+#142 = DIRECTION('',(-5.620105079557E-17,1.));+#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#144 = PCURVE('',#145,#150);+#145 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#146,#147)+ ,(#148,#149+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.282842712475),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#146 = CARTESIAN_POINT('',(-2.453385180455,3.801692590228,0.1));+#147 = CARTESIAN_POINT('',(-2.65,3.9,1.025));+#148 = CARTESIAN_POINT('',(-2.351692590228,3.903385180455,0.1));+#149 = CARTESIAN_POINT('',(-2.45,4.1,1.025));+#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);+#151 = LINE('',#152,#153);+#152 = CARTESIAN_POINT('',(0.282842712475,4.95728368093E-18));+#153 = VECTOR('',#154,1.);+#154 = DIRECTION('',(-8.881784197001E-16,1.));+#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#156 = ADVANCED_FACE('',(#157),#145,.F.);+#157 = FACE_BOUND('',#158,.F.);+#158 = EDGE_LOOP('',(#159,#181,#182,#210));+#159 = ORIENTED_EDGE('',*,*,#160,.T.);+#160 = EDGE_CURVE('',#161,#44,#163,.T.);+#161 = VERTEX_POINT('',#162);+#162 = CARTESIAN_POINT('',(-2.453385180455,3.801692590228,0.1));+#163 = SURFACE_CURVE('',#164,(#168,#174),.PCURVE_S1.);+#164 = LINE('',#165,#166);+#165 = CARTESIAN_POINT('',(-2.453385180455,3.801692590228,0.1));+#166 = VECTOR('',#167,1.);+#167 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#168 = PCURVE('',#145,#169);+#169 = DEFINITIONAL_REPRESENTATION('',(#170),#173);+#170 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#171,#172),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.143815040292),.PIECEWISE_BEZIER_KNOTS.);+#171 = CARTESIAN_POINT('',(4.011560321828E-16,-8.073379085605E-17));+#172 = CARTESIAN_POINT('',(0.282842712475,-8.070668585344E-17));+#173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#174 = PCURVE('',#65,#175);+#175 = DEFINITIONAL_REPRESENTATION('',(#176),#180);+#176 = LINE('',#177,#178);+#177 = CARTESIAN_POINT('',(3.462656672519E-02,-0.139584263766));+#178 = VECTOR('',#179,1.);+#179 = DIRECTION('',(-0.240771526086,0.9705818215));+#180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#181 = ORIENTED_EDGE('',*,*,#132,.T.);+#182 = ORIENTED_EDGE('',*,*,#183,.F.);+#183 = EDGE_CURVE('',#184,#105,#186,.T.);+#184 = VERTEX_POINT('',#185);+#185 = CARTESIAN_POINT('',(-2.65,3.9,1.025));+#186 = SURFACE_CURVE('',#187,(#191,#198),.PCURVE_S1.);+#187 = LINE('',#188,#189);+#188 = CARTESIAN_POINT('',(-2.65,3.9,1.025));+#189 = VECTOR('',#190,1.);+#190 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#191 = PCURVE('',#145,#192);+#192 = DEFINITIONAL_REPRESENTATION('',(#193),#197);+#193 = LINE('',#194,#195);+#194 = CARTESIAN_POINT('',(-3.027325080099E-16,1.));+#195 = VECTOR('',#196,1.);+#196 = DIRECTION('',(1.,0.));+#197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#198 = PCURVE('',#199,#204);+#199 = PLANE('',#200);+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);+#201 = CARTESIAN_POINT('',(-2.65,3.9,1.175));+#202 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#203 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#204 = DEFINITIONAL_REPRESENTATION('',(#205),#209);+#205 = LINE('',#206,#207);+#206 = CARTESIAN_POINT('',(0.,-0.15));+#207 = VECTOR('',#208,1.);+#208 = DIRECTION('',(1.,0.));+#209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#210 = ORIENTED_EDGE('',*,*,#211,.F.);+#211 = EDGE_CURVE('',#161,#184,#212,.T.);+#212 = SURFACE_CURVE('',#213,(#216,#223),.PCURVE_S1.);+#213 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#214,#215),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#214 = CARTESIAN_POINT('',(-2.453385180455,3.801692590228,0.1));+#215 = CARTESIAN_POINT('',(-2.65,3.9,1.025));+#216 = PCURVE('',#145,#217);+#217 = DEFINITIONAL_REPRESENTATION('',(#218),#222);+#218 = LINE('',#219,#220);+#219 = CARTESIAN_POINT('',(4.011560321828E-16,-8.073379085605E-17));+#220 = VECTOR('',#221,1.);+#221 = DIRECTION('',(-7.038885401928E-16,1.));+#222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#223 = PCURVE('',#224,#229);+#224 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#225,#226)+ ,(#227,#228+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.8),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#225 = CARTESIAN_POINT('',(-2.453385180455,-3.801692590228,0.1));+#226 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#227 = CARTESIAN_POINT('',(-2.453385180455,3.801692590228,0.1));+#228 = CARTESIAN_POINT('',(-2.65,3.9,1.025));+#229 = DEFINITIONAL_REPRESENTATION('',(#230),#234);+#230 = LINE('',#231,#232);+#231 = CARTESIAN_POINT('',(7.8,-1.278723939907E-17));+#232 = VECTOR('',#233,1.);+#233 = DIRECTION('',(8.881784197001E-16,1.));+#234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#235 = ADVANCED_FACE('',(#236),#224,.F.);+#236 = FACE_BOUND('',#237,.F.);+#237 = EDGE_LOOP('',(#238,#260,#261,#289,#317,#345,#373,#401,#429,#457,+ #485,#513,#541,#569,#597,#625,#653,#681,#709,#737,#765,#793,#821,+ #849,#877,#905,#933,#961));+#238 = ORIENTED_EDGE('',*,*,#239,.T.);+#239 = EDGE_CURVE('',#240,#161,#242,.T.);+#240 = VERTEX_POINT('',#241);+#241 = CARTESIAN_POINT('',(-2.453385180455,-3.801692590228,0.1));+#242 = SURFACE_CURVE('',#243,(#247,#253),.PCURVE_S1.);+#243 = LINE('',#244,#245);+#244 = CARTESIAN_POINT('',(-2.453385180455,-3.801692590228,0.1));+#245 = VECTOR('',#246,1.);+#246 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#247 = PCURVE('',#224,#248);+#248 = DEFINITIONAL_REPRESENTATION('',(#249),#252);+#249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#250,#251),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.603385180456),.PIECEWISE_BEZIER_KNOTS.);+#250 = CARTESIAN_POINT('',(3.477438376939E-16,-2.989168682949E-17));+#251 = CARTESIAN_POINT('',(7.8,1.881754035765E-16));+#252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#253 = PCURVE('',#65,#254);+#254 = DEFINITIONAL_REPRESENTATION('',(#255),#259);+#255 = LINE('',#256,#257);+#256 = CARTESIAN_POINT('',(6.547353029251,-4.063340146423));+#257 = VECTOR('',#258,1.);+#258 = DIRECTION('',(-0.856556166491,0.516053808867));+#259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#260 = ORIENTED_EDGE('',*,*,#211,.T.);+#261 = ORIENTED_EDGE('',*,*,#262,.F.);+#262 = EDGE_CURVE('',#263,#184,#265,.T.);+#263 = VERTEX_POINT('',#264);+#264 = CARTESIAN_POINT('',(-2.65,3.725,1.025));+#265 = SURFACE_CURVE('',#266,(#270,#277),.PCURVE_S1.);+#266 = LINE('',#267,#268);+#267 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#268 = VECTOR('',#269,1.);+#269 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#270 = PCURVE('',#224,#271);+#271 = DEFINITIONAL_REPRESENTATION('',(#272),#276);+#272 = LINE('',#273,#274);+#273 = CARTESIAN_POINT('',(0.,1.));+#274 = VECTOR('',#275,1.);+#275 = DIRECTION('',(1.,0.));+#276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#277 = PCURVE('',#278,#283);+#278 = PLANE('',#279);+#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282);+#280 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#281 = DIRECTION('',(1.,1.110223024625E-16,0.));+#282 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#283 = DEFINITIONAL_REPRESENTATION('',(#284),#288);+#284 = LINE('',#285,#286);+#285 = CARTESIAN_POINT('',(0.,-0.15));+#286 = VECTOR('',#287,1.);+#287 = DIRECTION('',(1.,0.));+#288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#289 = ORIENTED_EDGE('',*,*,#290,.F.);+#290 = EDGE_CURVE('',#291,#263,#293,.T.);+#291 = VERTEX_POINT('',#292);+#292 = CARTESIAN_POINT('',(-2.65,3.425,1.025));+#293 = SURFACE_CURVE('',#294,(#298,#305),.PCURVE_S1.);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#298 = PCURVE('',#224,#299);+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#304);+#300 = LINE('',#301,#302);+#301 = CARTESIAN_POINT('',(0.,1.));+#302 = VECTOR('',#303,1.);+#303 = DIRECTION('',(1.,0.));+#304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#305 = PCURVE('',#306,#311);+#306 = PLANE('',#307);+#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310);+#308 = CARTESIAN_POINT('',(-2.55,3.425,1.025));+#309 = DIRECTION('',(0.,0.,1.));+#310 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#311 = DEFINITIONAL_REPRESENTATION('',(#312),#316);+#312 = LINE('',#313,#314);+#313 = CARTESIAN_POINT('',(0.1,7.325));+#314 = VECTOR('',#315,1.);+#315 = DIRECTION('',(1.224646799147E-16,-1.));+#316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#317 = ORIENTED_EDGE('',*,*,#318,.F.);+#318 = EDGE_CURVE('',#319,#291,#321,.T.);+#319 = VERTEX_POINT('',#320);+#320 = CARTESIAN_POINT('',(-2.65,3.075,1.025));+#321 = SURFACE_CURVE('',#322,(#326,#333),.PCURVE_S1.);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#326 = PCURVE('',#224,#327);+#327 = DEFINITIONAL_REPRESENTATION('',(#328),#332);+#328 = LINE('',#329,#330);+#329 = CARTESIAN_POINT('',(0.,1.));+#330 = VECTOR('',#331,1.);+#331 = DIRECTION('',(1.,0.));+#332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#333 = PCURVE('',#334,#339);+#334 = PLANE('',#335);+#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338);+#336 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#337 = DIRECTION('',(1.,1.110223024625E-16,0.));+#338 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#339 = DEFINITIONAL_REPRESENTATION('',(#340),#344);+#340 = LINE('',#341,#342);+#341 = CARTESIAN_POINT('',(0.,-0.15));+#342 = VECTOR('',#343,1.);+#343 = DIRECTION('',(1.,0.));+#344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#345 = ORIENTED_EDGE('',*,*,#346,.F.);+#346 = EDGE_CURVE('',#347,#319,#349,.T.);+#347 = VERTEX_POINT('',#348);+#348 = CARTESIAN_POINT('',(-2.65,2.775,1.025));+#349 = SURFACE_CURVE('',#350,(#354,#361),.PCURVE_S1.);+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#354 = PCURVE('',#224,#355);+#355 = DEFINITIONAL_REPRESENTATION('',(#356),#360);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(0.,1.));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(1.,0.));+#360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#361 = PCURVE('',#362,#367);+#362 = PLANE('',#363);+#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366);+#364 = CARTESIAN_POINT('',(-2.55,2.775,1.025));+#365 = DIRECTION('',(0.,0.,1.));+#366 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#367 = DEFINITIONAL_REPRESENTATION('',(#368),#372);+#368 = LINE('',#369,#370);+#369 = CARTESIAN_POINT('',(0.1,6.675));+#370 = VECTOR('',#371,1.);+#371 = DIRECTION('',(1.224646799147E-16,-1.));+#372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#373 = ORIENTED_EDGE('',*,*,#374,.F.);+#374 = EDGE_CURVE('',#375,#347,#377,.T.);+#375 = VERTEX_POINT('',#376);+#376 = CARTESIAN_POINT('',(-2.65,2.425,1.025));+#377 = SURFACE_CURVE('',#378,(#382,#389),.PCURVE_S1.);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#382 = PCURVE('',#224,#383);+#383 = DEFINITIONAL_REPRESENTATION('',(#384),#388);+#384 = LINE('',#385,#386);+#385 = CARTESIAN_POINT('',(0.,1.));+#386 = VECTOR('',#387,1.);+#387 = DIRECTION('',(1.,0.));+#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#389 = PCURVE('',#390,#395);+#390 = PLANE('',#391);+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);+#392 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#393 = DIRECTION('',(1.,1.110223024625E-16,0.));+#394 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,-0.15));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(1.,0.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = ORIENTED_EDGE('',*,*,#402,.F.);+#402 = EDGE_CURVE('',#403,#375,#405,.T.);+#403 = VERTEX_POINT('',#404);+#404 = CARTESIAN_POINT('',(-2.65,2.125,1.025));+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#410 = PCURVE('',#224,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(0.,1.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(1.,0.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(-2.55,2.125,1.025));+#421 = DIRECTION('',(0.,0.,1.));+#422 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.1,6.025));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.224646799147E-16,-1.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ORIENTED_EDGE('',*,*,#430,.F.);+#430 = EDGE_CURVE('',#431,#403,#433,.T.);+#431 = VERTEX_POINT('',#432);+#432 = CARTESIAN_POINT('',(-2.65,1.775,1.025));+#433 = SURFACE_CURVE('',#434,(#438,#445),.PCURVE_S1.);+#434 = LINE('',#435,#436);+#435 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#436 = VECTOR('',#437,1.);+#437 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#438 = PCURVE('',#224,#439);+#439 = DEFINITIONAL_REPRESENTATION('',(#440),#444);+#440 = LINE('',#441,#442);+#441 = CARTESIAN_POINT('',(0.,1.));+#442 = VECTOR('',#443,1.);+#443 = DIRECTION('',(1.,6.344131569287E-16));+#444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#445 = PCURVE('',#446,#451);+#446 = PLANE('',#447);+#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450);+#448 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#449 = DIRECTION('',(1.,1.110223024625E-16,0.));+#450 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.,-0.15));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(1.,0.));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#459,#431,#461,.T.);+#459 = VERTEX_POINT('',#460);+#460 = CARTESIAN_POINT('',(-2.65,1.475,1.025));+#461 = SURFACE_CURVE('',#462,(#466,#473),.PCURVE_S1.);+#462 = LINE('',#463,#464);+#463 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#464 = VECTOR('',#465,1.);+#465 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#466 = PCURVE('',#224,#467);+#467 = DEFINITIONAL_REPRESENTATION('',(#468),#472);+#468 = LINE('',#469,#470);+#469 = CARTESIAN_POINT('',(0.,1.));+#470 = VECTOR('',#471,1.);+#471 = DIRECTION('',(1.,7.401486830834E-16));+#472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#473 = PCURVE('',#474,#479);+#474 = PLANE('',#475);+#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478);+#476 = CARTESIAN_POINT('',(-2.55,1.475,1.025));+#477 = DIRECTION('',(0.,0.,1.));+#478 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#479 = DEFINITIONAL_REPRESENTATION('',(#480),#484);+#480 = LINE('',#481,#482);+#481 = CARTESIAN_POINT('',(0.1,5.375));+#482 = VECTOR('',#483,1.);+#483 = DIRECTION('',(1.224646799147E-16,-1.));+#484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#485 = ORIENTED_EDGE('',*,*,#486,.F.);+#486 = EDGE_CURVE('',#487,#459,#489,.T.);+#487 = VERTEX_POINT('',#488);+#488 = CARTESIAN_POINT('',(-2.65,1.125,1.025));+#489 = SURFACE_CURVE('',#490,(#494,#501),.PCURVE_S1.);+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#494 = PCURVE('',#224,#495);+#495 = DEFINITIONAL_REPRESENTATION('',(#496),#500);+#496 = LINE('',#497,#498);+#497 = CARTESIAN_POINT('',(0.,1.));+#498 = VECTOR('',#499,1.);+#499 = DIRECTION('',(1.,6.344131569287E-16));+#500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#501 = PCURVE('',#502,#507);+#502 = PLANE('',#503);+#503 = AXIS2_PLACEMENT_3D('',#504,#505,#506);+#504 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#505 = DIRECTION('',(1.,1.110223024625E-16,0.));+#506 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#507 = DEFINITIONAL_REPRESENTATION('',(#508),#512);+#508 = LINE('',#509,#510);+#509 = CARTESIAN_POINT('',(0.,-0.15));+#510 = VECTOR('',#511,1.);+#511 = DIRECTION('',(1.,0.));+#512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#513 = ORIENTED_EDGE('',*,*,#514,.F.);+#514 = EDGE_CURVE('',#515,#487,#517,.T.);+#515 = VERTEX_POINT('',#516);+#516 = CARTESIAN_POINT('',(-2.65,0.825,1.025));+#517 = SURFACE_CURVE('',#518,(#522,#529),.PCURVE_S1.);+#518 = LINE('',#519,#520);+#519 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#520 = VECTOR('',#521,1.);+#521 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#522 = PCURVE('',#224,#523);+#523 = DEFINITIONAL_REPRESENTATION('',(#524),#528);+#524 = LINE('',#525,#526);+#525 = CARTESIAN_POINT('',(0.,1.));+#526 = VECTOR('',#527,1.);+#527 = DIRECTION('',(1.,7.401486830834E-16));+#528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#529 = PCURVE('',#530,#535);+#530 = PLANE('',#531);+#531 = AXIS2_PLACEMENT_3D('',#532,#533,#534);+#532 = CARTESIAN_POINT('',(-2.55,0.825,1.025));+#533 = DIRECTION('',(0.,0.,1.));+#534 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#535 = DEFINITIONAL_REPRESENTATION('',(#536),#540);+#536 = LINE('',#537,#538);+#537 = CARTESIAN_POINT('',(0.1,4.725));+#538 = VECTOR('',#539,1.);+#539 = DIRECTION('',(1.224646799147E-16,-1.));+#540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#541 = ORIENTED_EDGE('',*,*,#542,.F.);+#542 = EDGE_CURVE('',#543,#515,#545,.T.);+#543 = VERTEX_POINT('',#544);+#544 = CARTESIAN_POINT('',(-2.65,0.475,1.025));+#545 = SURFACE_CURVE('',#546,(#550,#557),.PCURVE_S1.);+#546 = LINE('',#547,#548);+#547 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#548 = VECTOR('',#549,1.);+#549 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#550 = PCURVE('',#224,#551);+#551 = DEFINITIONAL_REPRESENTATION('',(#552),#556);+#552 = LINE('',#553,#554);+#553 = CARTESIAN_POINT('',(0.,1.));+#554 = VECTOR('',#555,1.);+#555 = DIRECTION('',(1.,6.344131569287E-16));+#556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#557 = PCURVE('',#558,#563);+#558 = PLANE('',#559);+#559 = AXIS2_PLACEMENT_3D('',#560,#561,#562);+#560 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#561 = DIRECTION('',(1.,1.110223024625E-16,0.));+#562 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#563 = DEFINITIONAL_REPRESENTATION('',(#564),#568);+#564 = LINE('',#565,#566);+#565 = CARTESIAN_POINT('',(0.,-0.15));+#566 = VECTOR('',#567,1.);+#567 = DIRECTION('',(1.,0.));+#568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#569 = ORIENTED_EDGE('',*,*,#570,.F.);+#570 = EDGE_CURVE('',#571,#543,#573,.T.);+#571 = VERTEX_POINT('',#572);+#572 = CARTESIAN_POINT('',(-2.65,0.175,1.025));+#573 = SURFACE_CURVE('',#574,(#578,#585),.PCURVE_S1.);+#574 = LINE('',#575,#576);+#575 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#576 = VECTOR('',#577,1.);+#577 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#578 = PCURVE('',#224,#579);+#579 = DEFINITIONAL_REPRESENTATION('',(#580),#584);+#580 = LINE('',#581,#582);+#581 = CARTESIAN_POINT('',(0.,1.));+#582 = VECTOR('',#583,1.);+#583 = DIRECTION('',(1.,7.401486830834E-16));+#584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#585 = PCURVE('',#586,#591);+#586 = PLANE('',#587);+#587 = AXIS2_PLACEMENT_3D('',#588,#589,#590);+#588 = CARTESIAN_POINT('',(-2.55,0.175,1.025));+#589 = DIRECTION('',(0.,0.,1.));+#590 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#591 = DEFINITIONAL_REPRESENTATION('',(#592),#596);+#592 = LINE('',#593,#594);+#593 = CARTESIAN_POINT('',(0.1,4.075));+#594 = VECTOR('',#595,1.);+#595 = DIRECTION('',(1.224646799147E-16,-1.));+#596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#597 = ORIENTED_EDGE('',*,*,#598,.F.);+#598 = EDGE_CURVE('',#599,#571,#601,.T.);+#599 = VERTEX_POINT('',#600);+#600 = CARTESIAN_POINT('',(-2.65,-0.175,1.025));+#601 = SURFACE_CURVE('',#602,(#606,#613),.PCURVE_S1.);+#602 = LINE('',#603,#604);+#603 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#604 = VECTOR('',#605,1.);+#605 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#606 = PCURVE('',#224,#607);+#607 = DEFINITIONAL_REPRESENTATION('',(#608),#612);+#608 = LINE('',#609,#610);+#609 = CARTESIAN_POINT('',(0.,1.));+#610 = VECTOR('',#611,1.);+#611 = DIRECTION('',(1.,6.344131569287E-16));+#612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#613 = PCURVE('',#614,#619);+#614 = PLANE('',#615);+#615 = AXIS2_PLACEMENT_3D('',#616,#617,#618);+#616 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#617 = DIRECTION('',(1.,1.110223024625E-16,0.));+#618 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#619 = DEFINITIONAL_REPRESENTATION('',(#620),#624);+#620 = LINE('',#621,#622);+#621 = CARTESIAN_POINT('',(0.,-0.15));+#622 = VECTOR('',#623,1.);+#623 = DIRECTION('',(1.,0.));+#624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#625 = ORIENTED_EDGE('',*,*,#626,.F.);+#626 = EDGE_CURVE('',#627,#599,#629,.T.);+#627 = VERTEX_POINT('',#628);+#628 = CARTESIAN_POINT('',(-2.65,-0.475,1.025));+#629 = SURFACE_CURVE('',#630,(#634,#641),.PCURVE_S1.);+#630 = LINE('',#631,#632);+#631 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#632 = VECTOR('',#633,1.);+#633 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#634 = PCURVE('',#224,#635);+#635 = DEFINITIONAL_REPRESENTATION('',(#636),#640);+#636 = LINE('',#637,#638);+#637 = CARTESIAN_POINT('',(0.,1.));+#638 = VECTOR('',#639,1.);+#639 = DIRECTION('',(1.,7.401486830834E-16));+#640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#641 = PCURVE('',#642,#647);+#642 = PLANE('',#643);+#643 = AXIS2_PLACEMENT_3D('',#644,#645,#646);+#644 = CARTESIAN_POINT('',(-2.55,-0.475,1.025));+#645 = DIRECTION('',(0.,0.,1.));+#646 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#647 = DEFINITIONAL_REPRESENTATION('',(#648),#652);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(0.1,3.425));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(1.224646799147E-16,-1.));+#652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#653 = ORIENTED_EDGE('',*,*,#654,.F.);+#654 = EDGE_CURVE('',#655,#627,#657,.T.);+#655 = VERTEX_POINT('',#656);+#656 = CARTESIAN_POINT('',(-2.65,-0.825,1.025));+#657 = SURFACE_CURVE('',#658,(#662,#669),.PCURVE_S1.);+#658 = LINE('',#659,#660);+#659 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#660 = VECTOR('',#661,1.);+#661 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#662 = PCURVE('',#224,#663);+#663 = DEFINITIONAL_REPRESENTATION('',(#664),#668);+#664 = LINE('',#665,#666);+#665 = CARTESIAN_POINT('',(0.,1.));+#666 = VECTOR('',#667,1.);+#667 = DIRECTION('',(1.,6.344131569287E-16));+#668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#669 = PCURVE('',#670,#675);+#670 = PLANE('',#671);+#671 = AXIS2_PLACEMENT_3D('',#672,#673,#674);+#672 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#673 = DIRECTION('',(1.,1.110223024625E-16,0.));+#674 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#675 = DEFINITIONAL_REPRESENTATION('',(#676),#680);+#676 = LINE('',#677,#678);+#677 = CARTESIAN_POINT('',(0.,-0.15));+#678 = VECTOR('',#679,1.);+#679 = DIRECTION('',(1.,0.));+#680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#681 = ORIENTED_EDGE('',*,*,#682,.F.);+#682 = EDGE_CURVE('',#683,#655,#685,.T.);+#683 = VERTEX_POINT('',#684);+#684 = CARTESIAN_POINT('',(-2.65,-1.125,1.025));+#685 = SURFACE_CURVE('',#686,(#690,#697),.PCURVE_S1.);+#686 = LINE('',#687,#688);+#687 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#688 = VECTOR('',#689,1.);+#689 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#690 = PCURVE('',#224,#691);+#691 = DEFINITIONAL_REPRESENTATION('',(#692),#696);+#692 = LINE('',#693,#694);+#693 = CARTESIAN_POINT('',(0.,1.));+#694 = VECTOR('',#695,1.);+#695 = DIRECTION('',(1.,7.401486830834E-16));+#696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#697 = PCURVE('',#698,#703);+#698 = PLANE('',#699);+#699 = AXIS2_PLACEMENT_3D('',#700,#701,#702);+#700 = CARTESIAN_POINT('',(-2.55,-1.125,1.025));+#701 = DIRECTION('',(0.,0.,1.));+#702 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#703 = DEFINITIONAL_REPRESENTATION('',(#704),#708);+#704 = LINE('',#705,#706);+#705 = CARTESIAN_POINT('',(0.1,2.775));+#706 = VECTOR('',#707,1.);+#707 = DIRECTION('',(1.224646799147E-16,-1.));+#708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#709 = ORIENTED_EDGE('',*,*,#710,.F.);+#710 = EDGE_CURVE('',#711,#683,#713,.T.);+#711 = VERTEX_POINT('',#712);+#712 = CARTESIAN_POINT('',(-2.65,-1.475,1.025));+#713 = SURFACE_CURVE('',#714,(#718,#725),.PCURVE_S1.);+#714 = LINE('',#715,#716);+#715 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#716 = VECTOR('',#717,1.);+#717 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#718 = PCURVE('',#224,#719);+#719 = DEFINITIONAL_REPRESENTATION('',(#720),#724);+#720 = LINE('',#721,#722);+#721 = CARTESIAN_POINT('',(0.,1.));+#722 = VECTOR('',#723,1.);+#723 = DIRECTION('',(1.,6.344131569287E-16));+#724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#725 = PCURVE('',#726,#731);+#726 = PLANE('',#727);+#727 = AXIS2_PLACEMENT_3D('',#728,#729,#730);+#728 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#729 = DIRECTION('',(1.,1.110223024625E-16,0.));+#730 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#731 = DEFINITIONAL_REPRESENTATION('',(#732),#736);+#732 = LINE('',#733,#734);+#733 = CARTESIAN_POINT('',(0.,-0.15));+#734 = VECTOR('',#735,1.);+#735 = DIRECTION('',(1.,0.));+#736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#737 = ORIENTED_EDGE('',*,*,#738,.F.);+#738 = EDGE_CURVE('',#739,#711,#741,.T.);+#739 = VERTEX_POINT('',#740);+#740 = CARTESIAN_POINT('',(-2.65,-1.775,1.025));+#741 = SURFACE_CURVE('',#742,(#746,#753),.PCURVE_S1.);+#742 = LINE('',#743,#744);+#743 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#744 = VECTOR('',#745,1.);+#745 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#746 = PCURVE('',#224,#747);+#747 = DEFINITIONAL_REPRESENTATION('',(#748),#752);+#748 = LINE('',#749,#750);+#749 = CARTESIAN_POINT('',(0.,1.));+#750 = VECTOR('',#751,1.);+#751 = DIRECTION('',(1.,7.401486830834E-16));+#752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#753 = PCURVE('',#754,#759);+#754 = PLANE('',#755);+#755 = AXIS2_PLACEMENT_3D('',#756,#757,#758);+#756 = CARTESIAN_POINT('',(-2.55,-1.775,1.025));+#757 = DIRECTION('',(0.,0.,1.));+#758 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#759 = DEFINITIONAL_REPRESENTATION('',(#760),#764);+#760 = LINE('',#761,#762);+#761 = CARTESIAN_POINT('',(0.1,2.125));+#762 = VECTOR('',#763,1.);+#763 = DIRECTION('',(1.224646799147E-16,-1.));+#764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#765 = ORIENTED_EDGE('',*,*,#766,.F.);+#766 = EDGE_CURVE('',#767,#739,#769,.T.);+#767 = VERTEX_POINT('',#768);+#768 = CARTESIAN_POINT('',(-2.65,-2.125,1.025));+#769 = SURFACE_CURVE('',#770,(#774,#781),.PCURVE_S1.);+#770 = LINE('',#771,#772);+#771 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#772 = VECTOR('',#773,1.);+#773 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#774 = PCURVE('',#224,#775);+#775 = DEFINITIONAL_REPRESENTATION('',(#776),#780);+#776 = LINE('',#777,#778);+#777 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#778 = VECTOR('',#779,1.);+#779 = DIRECTION('',(1.,6.344131569287E-16));+#780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#781 = PCURVE('',#782,#787);+#782 = PLANE('',#783);+#783 = AXIS2_PLACEMENT_3D('',#784,#785,#786);+#784 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#785 = DIRECTION('',(1.,1.110223024625E-16,0.));+#786 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#787 = DEFINITIONAL_REPRESENTATION('',(#788),#792);+#788 = LINE('',#789,#790);+#789 = CARTESIAN_POINT('',(0.,-0.15));+#790 = VECTOR('',#791,1.);+#791 = DIRECTION('',(1.,0.));+#792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#793 = ORIENTED_EDGE('',*,*,#794,.F.);+#794 = EDGE_CURVE('',#795,#767,#797,.T.);+#795 = VERTEX_POINT('',#796);+#796 = CARTESIAN_POINT('',(-2.65,-2.425,1.025));+#797 = SURFACE_CURVE('',#798,(#802,#809),.PCURVE_S1.);+#798 = LINE('',#799,#800);+#799 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#800 = VECTOR('',#801,1.);+#801 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#802 = PCURVE('',#224,#803);+#803 = DEFINITIONAL_REPRESENTATION('',(#804),#808);+#804 = LINE('',#805,#806);+#805 = CARTESIAN_POINT('',(-2.22044604925E-16,1.));+#806 = VECTOR('',#807,1.);+#807 = DIRECTION('',(1.,0.));+#808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#809 = PCURVE('',#810,#815);+#810 = PLANE('',#811);+#811 = AXIS2_PLACEMENT_3D('',#812,#813,#814);+#812 = CARTESIAN_POINT('',(-2.55,-2.425,1.025));+#813 = DIRECTION('',(0.,0.,1.));+#814 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#815 = DEFINITIONAL_REPRESENTATION('',(#816),#820);+#816 = LINE('',#817,#818);+#817 = CARTESIAN_POINT('',(0.1,1.475));+#818 = VECTOR('',#819,1.);+#819 = DIRECTION('',(1.224646799147E-16,-1.));+#820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#821 = ORIENTED_EDGE('',*,*,#822,.F.);+#822 = EDGE_CURVE('',#823,#795,#825,.T.);+#823 = VERTEX_POINT('',#824);+#824 = CARTESIAN_POINT('',(-2.65,-2.775,1.025));+#825 = SURFACE_CURVE('',#826,(#830,#837),.PCURVE_S1.);+#826 = LINE('',#827,#828);+#827 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#828 = VECTOR('',#829,1.);+#829 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#830 = PCURVE('',#224,#831);+#831 = DEFINITIONAL_REPRESENTATION('',(#832),#836);+#832 = LINE('',#833,#834);+#833 = CARTESIAN_POINT('',(0.,1.));+#834 = VECTOR('',#835,1.);+#835 = DIRECTION('',(1.,0.));+#836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#837 = PCURVE('',#838,#843);+#838 = PLANE('',#839);+#839 = AXIS2_PLACEMENT_3D('',#840,#841,#842);+#840 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#841 = DIRECTION('',(1.,1.110223024625E-16,0.));+#842 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#843 = DEFINITIONAL_REPRESENTATION('',(#844),#848);+#844 = LINE('',#845,#846);+#845 = CARTESIAN_POINT('',(0.,-0.15));+#846 = VECTOR('',#847,1.);+#847 = DIRECTION('',(1.,0.));+#848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#849 = ORIENTED_EDGE('',*,*,#850,.F.);+#850 = EDGE_CURVE('',#851,#823,#853,.T.);+#851 = VERTEX_POINT('',#852);+#852 = CARTESIAN_POINT('',(-2.65,-3.075,1.025));+#853 = SURFACE_CURVE('',#854,(#858,#865),.PCURVE_S1.);+#854 = LINE('',#855,#856);+#855 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#856 = VECTOR('',#857,1.);+#857 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#858 = PCURVE('',#224,#859);+#859 = DEFINITIONAL_REPRESENTATION('',(#860),#864);+#860 = LINE('',#861,#862);+#861 = CARTESIAN_POINT('',(1.110223024625E-16,1.));+#862 = VECTOR('',#863,1.);+#863 = DIRECTION('',(1.,0.));+#864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#865 = PCURVE('',#866,#871);+#866 = PLANE('',#867);+#867 = AXIS2_PLACEMENT_3D('',#868,#869,#870);+#868 = CARTESIAN_POINT('',(-2.55,-3.075,1.025));+#869 = DIRECTION('',(0.,0.,1.));+#870 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#871 = DEFINITIONAL_REPRESENTATION('',(#872),#876);+#872 = LINE('',#873,#874);+#873 = CARTESIAN_POINT('',(0.1,0.825));+#874 = VECTOR('',#875,1.);+#875 = DIRECTION('',(1.224646799147E-16,-1.));+#876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#877 = ORIENTED_EDGE('',*,*,#878,.F.);+#878 = EDGE_CURVE('',#879,#851,#881,.T.);+#879 = VERTEX_POINT('',#880);+#880 = CARTESIAN_POINT('',(-2.65,-3.425,1.025));+#881 = SURFACE_CURVE('',#882,(#886,#893),.PCURVE_S1.);+#882 = LINE('',#883,#884);+#883 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#884 = VECTOR('',#885,1.);+#885 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#886 = PCURVE('',#224,#887);+#887 = DEFINITIONAL_REPRESENTATION('',(#888),#892);+#888 = LINE('',#889,#890);+#889 = CARTESIAN_POINT('',(-5.551115123126E-17,1.));+#890 = VECTOR('',#891,1.);+#891 = DIRECTION('',(1.,0.));+#892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#893 = PCURVE('',#894,#899);+#894 = PLANE('',#895);+#895 = AXIS2_PLACEMENT_3D('',#896,#897,#898);+#896 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#897 = DIRECTION('',(1.,1.110223024625E-16,0.));+#898 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#899 = DEFINITIONAL_REPRESENTATION('',(#900),#904);+#900 = LINE('',#901,#902);+#901 = CARTESIAN_POINT('',(0.,-0.15));+#902 = VECTOR('',#903,1.);+#903 = DIRECTION('',(1.,0.));+#904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#905 = ORIENTED_EDGE('',*,*,#906,.F.);+#906 = EDGE_CURVE('',#907,#879,#909,.T.);+#907 = VERTEX_POINT('',#908);+#908 = CARTESIAN_POINT('',(-2.65,-3.725,1.025));+#909 = SURFACE_CURVE('',#910,(#914,#921),.PCURVE_S1.);+#910 = LINE('',#911,#912);+#911 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#912 = VECTOR('',#913,1.);+#913 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#914 = PCURVE('',#224,#915);+#915 = DEFINITIONAL_REPRESENTATION('',(#916),#920);+#916 = LINE('',#917,#918);+#917 = CARTESIAN_POINT('',(1.387778780781E-16,1.));+#918 = VECTOR('',#919,1.);+#919 = DIRECTION('',(1.,0.));+#920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#921 = PCURVE('',#922,#927);+#922 = PLANE('',#923);+#923 = AXIS2_PLACEMENT_3D('',#924,#925,#926);+#924 = CARTESIAN_POINT('',(-2.55,-3.725,1.025));+#925 = DIRECTION('',(0.,0.,1.));+#926 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#927 = DEFINITIONAL_REPRESENTATION('',(#928),#932);+#928 = LINE('',#929,#930);+#929 = CARTESIAN_POINT('',(0.1,0.175));+#930 = VECTOR('',#931,1.);+#931 = DIRECTION('',(1.224646799147E-16,-1.));+#932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#933 = ORIENTED_EDGE('',*,*,#934,.F.);+#934 = EDGE_CURVE('',#935,#907,#937,.T.);+#935 = VERTEX_POINT('',#936);+#936 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#937 = SURFACE_CURVE('',#938,(#942,#949),.PCURVE_S1.);+#938 = LINE('',#939,#940);+#939 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#940 = VECTOR('',#941,1.);+#941 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#942 = PCURVE('',#224,#943);+#943 = DEFINITIONAL_REPRESENTATION('',(#944),#948);+#944 = LINE('',#945,#946);+#945 = CARTESIAN_POINT('',(2.210208642786E-16,1.));+#946 = VECTOR('',#947,1.);+#947 = DIRECTION('',(1.,0.));+#948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#949 = PCURVE('',#950,#955);+#950 = PLANE('',#951);+#951 = AXIS2_PLACEMENT_3D('',#952,#953,#954);+#952 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#953 = DIRECTION('',(1.,1.110223024625E-16,0.));+#954 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#955 = DEFINITIONAL_REPRESENTATION('',(#956),#960);+#956 = LINE('',#957,#958);+#957 = CARTESIAN_POINT('',(0.,-0.15));+#958 = VECTOR('',#959,1.);+#959 = DIRECTION('',(1.,0.));+#960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#961 = ORIENTED_EDGE('',*,*,#962,.F.);+#962 = EDGE_CURVE('',#240,#935,#963,.T.);+#963 = SURFACE_CURVE('',#964,(#967,#974),.PCURVE_S1.);+#964 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#965,#966),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#965 = CARTESIAN_POINT('',(-2.453385180455,-3.801692590228,0.1));+#966 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#967 = PCURVE('',#224,#968);+#968 = DEFINITIONAL_REPRESENTATION('',(#969),#973);+#969 = LINE('',#970,#971);+#970 = CARTESIAN_POINT('',(3.477438376939E-16,-2.989168682949E-17));+#971 = VECTOR('',#972,1.);+#972 = DIRECTION('',(-1.171245910644E-16,1.));+#973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#974 = PCURVE('',#975,#980);+#975 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#976,#977)+ ,(#978,#979+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.282842712475),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#976 = CARTESIAN_POINT('',(-2.351692590228,-3.903385180455,0.1));+#977 = CARTESIAN_POINT('',(-2.45,-4.1,1.025));+#978 = CARTESIAN_POINT('',(-2.453385180455,-3.801692590228,0.1));+#979 = CARTESIAN_POINT('',(-2.65,-3.9,1.025));+#980 = DEFINITIONAL_REPRESENTATION('',(#981),#985);+#981 = LINE('',#982,#983);+#982 = CARTESIAN_POINT('',(0.282842712475,-2.650020471122E-17));+#983 = VECTOR('',#984,1.);+#984 = DIRECTION('',(1.110223024625E-16,1.));+#985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#986 = ADVANCED_FACE('',(#987),#975,.F.);+#987 = FACE_BOUND('',#988,.F.);+#988 = EDGE_LOOP('',(#989,#1011,#1012,#1040));+#989 = ORIENTED_EDGE('',*,*,#990,.T.);+#990 = EDGE_CURVE('',#991,#240,#993,.T.);+#991 = VERTEX_POINT('',#992);+#992 = CARTESIAN_POINT('',(-2.351692590228,-3.903385180455,0.1));+#993 = SURFACE_CURVE('',#994,(#998,#1004),.PCURVE_S1.);+#994 = LINE('',#995,#996);+#995 = CARTESIAN_POINT('',(-2.351692590228,-3.903385180455,0.1));+#996 = VECTOR('',#997,1.);+#997 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#998 = PCURVE('',#975,#999);+#999 = DEFINITIONAL_REPRESENTATION('',(#1000),#1003);+#1000 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1001,#1002),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.143815040292),.PIECEWISE_BEZIER_KNOTS.);+#1001 = CARTESIAN_POINT('',(3.967270879804E-16,-1.121777267727E-16));+#1002 = CARTESIAN_POINT('',(0.282842712475,-1.121641742456E-16));+#1003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1004 = PCURVE('',#65,#1005);+#1005 = DEFINITIONAL_REPRESENTATION('',(#1006),#1010);+#1006 = LINE('',#1007,#1008);+#1007 = CARTESIAN_POINT('',(6.686937293017,-4.028713579698));+#1008 = VECTOR('',#1009,1.);+#1009 = DIRECTION('',(-0.9705818215,-0.240771526086));+#1010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1011 = ORIENTED_EDGE('',*,*,#962,.T.);+#1012 = ORIENTED_EDGE('',*,*,#1013,.F.);+#1013 = EDGE_CURVE('',#1014,#935,#1016,.T.);+#1014 = VERTEX_POINT('',#1015);+#1015 = CARTESIAN_POINT('',(-2.45,-4.1,1.025));+#1016 = SURFACE_CURVE('',#1017,(#1021,#1028),.PCURVE_S1.);+#1017 = LINE('',#1018,#1019);+#1018 = CARTESIAN_POINT('',(-2.45,-4.1,1.025));+#1019 = VECTOR('',#1020,1.);+#1020 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1021 = PCURVE('',#975,#1022);+#1022 = DEFINITIONAL_REPRESENTATION('',(#1023),#1027);+#1023 = LINE('',#1024,#1025);+#1024 = CARTESIAN_POINT('',(3.153169415486E-16,1.));+#1025 = VECTOR('',#1026,1.);+#1026 = DIRECTION('',(1.,0.));+#1027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1028 = PCURVE('',#1029,#1034);+#1029 = PLANE('',#1030);+#1030 = AXIS2_PLACEMENT_3D('',#1031,#1032,#1033);+#1031 = CARTESIAN_POINT('',(-2.45,-4.1,1.175));+#1032 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1033 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1034 = DEFINITIONAL_REPRESENTATION('',(#1035),#1039);+#1035 = LINE('',#1036,#1037);+#1036 = CARTESIAN_POINT('',(0.,-0.15));+#1037 = VECTOR('',#1038,1.);+#1038 = DIRECTION('',(1.,0.));+#1039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1040 = ORIENTED_EDGE('',*,*,#1041,.F.);+#1041 = EDGE_CURVE('',#991,#1014,#1042,.T.);+#1042 = SURFACE_CURVE('',#1043,(#1046,#1053),.PCURVE_S1.);+#1043 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1044,#1045),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1044 = CARTESIAN_POINT('',(-2.351692590228,-3.903385180455,0.1));+#1045 = CARTESIAN_POINT('',(-2.45,-4.1,1.025));+#1046 = PCURVE('',#975,#1047);+#1047 = DEFINITIONAL_REPRESENTATION('',(#1048),#1052);+#1048 = LINE('',#1049,#1050);+#1049 = CARTESIAN_POINT('',(3.967270879804E-16,-1.121777267727E-16));+#1050 = VECTOR('',#1051,1.);+#1051 = DIRECTION('',(-8.141014643179E-17,1.));+#1052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1053 = PCURVE('',#1054,#1059);+#1054 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1055,#1056)+ ,(#1057,#1058+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.9),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#1055 = CARTESIAN_POINT('',(2.351692590228,-3.903385180455,0.1));+#1056 = CARTESIAN_POINT('',(2.45,-4.1,1.025));+#1057 = CARTESIAN_POINT('',(-2.351692590228,-3.903385180455,0.1));+#1058 = CARTESIAN_POINT('',(-2.45,-4.1,1.025));+#1059 = DEFINITIONAL_REPRESENTATION('',(#1060),#1064);+#1060 = LINE('',#1061,#1062);+#1061 = CARTESIAN_POINT('',(4.9,-1.206114279741E-16));+#1062 = VECTOR('',#1063,1.);+#1063 = DIRECTION('',(-8.881784197001E-16,1.));+#1064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1065 = ADVANCED_FACE('',(#1066),#1054,.F.);+#1066 = FACE_BOUND('',#1067,.F.);+#1067 = EDGE_LOOP('',(#1068,#1090,#1091,#1119));+#1068 = ORIENTED_EDGE('',*,*,#1069,.T.);+#1069 = EDGE_CURVE('',#1070,#991,#1072,.T.);+#1070 = VERTEX_POINT('',#1071);+#1071 = CARTESIAN_POINT('',(2.351692590228,-3.903385180455,0.1));+#1072 = SURFACE_CURVE('',#1073,(#1077,#1083),.PCURVE_S1.);+#1073 = LINE('',#1074,#1075);+#1074 = CARTESIAN_POINT('',(2.351692590228,-3.903385180455,0.1));+#1075 = VECTOR('',#1076,1.);+#1076 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1077 = PCURVE('',#1054,#1078);+#1078 = DEFINITIONAL_REPRESENTATION('',(#1079),#1082);+#1079 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1080,#1081),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.703385180456),.PIECEWISE_BEZIER_KNOTS.);+#1080 = CARTESIAN_POINT('',(-4.10529401847E-16,1.134644232514E-17));+#1081 = CARTESIAN_POINT('',(4.9,6.315182682122E-17));+#1082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1083 = PCURVE('',#65,#1084);+#1084 = DEFINITIONAL_REPRESENTATION('',(#1085),#1089);+#1085 = LINE('',#1086,#1087);+#1086 = CARTESIAN_POINT('',(9.11413712996,4.362732397567E-12));+#1087 = VECTOR('',#1088,1.);+#1088 = DIRECTION('',(-0.516053808867,-0.856556166491));+#1089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1090 = ORIENTED_EDGE('',*,*,#1041,.T.);+#1091 = ORIENTED_EDGE('',*,*,#1092,.F.);+#1092 = EDGE_CURVE('',#1093,#1014,#1095,.T.);+#1093 = VERTEX_POINT('',#1094);+#1094 = CARTESIAN_POINT('',(2.45,-4.1,1.025));+#1095 = SURFACE_CURVE('',#1096,(#1100,#1107),.PCURVE_S1.);+#1096 = LINE('',#1097,#1098);+#1097 = CARTESIAN_POINT('',(2.45,-4.1,1.025));+#1098 = VECTOR('',#1099,1.);+#1099 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1100 = PCURVE('',#1054,#1101);+#1101 = DEFINITIONAL_REPRESENTATION('',(#1102),#1106);+#1102 = LINE('',#1103,#1104);+#1103 = CARTESIAN_POINT('',(-4.667304526425E-16,1.));+#1104 = VECTOR('',#1105,1.);+#1105 = DIRECTION('',(1.,2.265761274745E-17));+#1106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1107 = PCURVE('',#1108,#1113);+#1108 = PLANE('',#1109);+#1109 = AXIS2_PLACEMENT_3D('',#1110,#1111,#1112);+#1110 = CARTESIAN_POINT('',(2.45,-4.1,1.175));+#1111 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1112 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1113 = DEFINITIONAL_REPRESENTATION('',(#1114),#1118);+#1114 = LINE('',#1115,#1116);+#1115 = CARTESIAN_POINT('',(-0.,-0.15));+#1116 = VECTOR('',#1117,1.);+#1117 = DIRECTION('',(1.,0.));+#1118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1119 = ORIENTED_EDGE('',*,*,#1120,.F.);+#1120 = EDGE_CURVE('',#1070,#1093,#1121,.T.);+#1121 = SURFACE_CURVE('',#1122,(#1125,#1132),.PCURVE_S1.);+#1122 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1123,#1124),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1123 = CARTESIAN_POINT('',(2.351692590228,-3.903385180455,0.1));+#1124 = CARTESIAN_POINT('',(2.45,-4.1,1.025));+#1125 = PCURVE('',#1054,#1126);+#1126 = DEFINITIONAL_REPRESENTATION('',(#1127),#1131);+#1127 = LINE('',#1128,#1129);+#1128 = CARTESIAN_POINT('',(-4.10529401847E-16,1.134644232514E-17));+#1129 = VECTOR('',#1130,1.);+#1130 = DIRECTION('',(-5.620105079557E-17,1.));+#1131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1132 = PCURVE('',#1133,#1138);+#1133 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1134,#1135)+ ,(#1136,#1137+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.282842712475),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#1134 = CARTESIAN_POINT('',(2.453385180455,-3.801692590228,0.1));+#1135 = CARTESIAN_POINT('',(2.65,-3.9,1.025));+#1136 = CARTESIAN_POINT('',(2.351692590228,-3.903385180455,0.1));+#1137 = CARTESIAN_POINT('',(2.45,-4.1,1.025));+#1138 = DEFINITIONAL_REPRESENTATION('',(#1139),#1143);+#1139 = LINE('',#1140,#1141);+#1140 = CARTESIAN_POINT('',(0.282842712475,4.95728368093E-18));+#1141 = VECTOR('',#1142,1.);+#1142 = DIRECTION('',(-8.881784197001E-16,1.));+#1143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1144 = ADVANCED_FACE('',(#1145),#1133,.F.);+#1145 = FACE_BOUND('',#1146,.F.);+#1146 = EDGE_LOOP('',(#1147,#1169,#1170,#1198));+#1147 = ORIENTED_EDGE('',*,*,#1148,.T.);+#1148 = EDGE_CURVE('',#1149,#1070,#1151,.T.);+#1149 = VERTEX_POINT('',#1150);+#1150 = CARTESIAN_POINT('',(2.453385180455,-3.801692590228,0.1));+#1151 = SURFACE_CURVE('',#1152,(#1156,#1162),.PCURVE_S1.);+#1152 = LINE('',#1153,#1154);+#1153 = CARTESIAN_POINT('',(2.453385180455,-3.801692590228,0.1));+#1154 = VECTOR('',#1155,1.);+#1155 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1156 = PCURVE('',#1133,#1157);+#1157 = DEFINITIONAL_REPRESENTATION('',(#1158),#1161);+#1158 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1159,#1160),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.143815040292),.PIECEWISE_BEZIER_KNOTS.);+#1159 = CARTESIAN_POINT('',(4.011560321828E-16,-8.073379085605E-17));+#1160 = CARTESIAN_POINT('',(0.282842712475,-8.070668585344E-17));+#1161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1162 = PCURVE('',#65,#1163);+#1163 = DEFINITIONAL_REPRESENTATION('',(#1164),#1168);+#1164 = LINE('',#1165,#1166);+#1165 = CARTESIAN_POINT('',(9.079510563235,0.13958426377));+#1166 = VECTOR('',#1167,1.);+#1167 = DIRECTION('',(0.240771526086,-0.9705818215));+#1168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1169 = ORIENTED_EDGE('',*,*,#1120,.T.);+#1170 = ORIENTED_EDGE('',*,*,#1171,.F.);+#1171 = EDGE_CURVE('',#1172,#1093,#1174,.T.);+#1172 = VERTEX_POINT('',#1173);+#1173 = CARTESIAN_POINT('',(2.65,-3.9,1.025));+#1174 = SURFACE_CURVE('',#1175,(#1179,#1186),.PCURVE_S1.);+#1175 = LINE('',#1176,#1177);+#1176 = CARTESIAN_POINT('',(2.65,-3.9,1.025));+#1177 = VECTOR('',#1178,1.);+#1178 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1179 = PCURVE('',#1133,#1180);+#1180 = DEFINITIONAL_REPRESENTATION('',(#1181),#1185);+#1181 = LINE('',#1182,#1183);+#1182 = CARTESIAN_POINT('',(-3.027325080099E-16,1.));+#1183 = VECTOR('',#1184,1.);+#1184 = DIRECTION('',(1.,0.));+#1185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1186 = PCURVE('',#1187,#1192);+#1187 = PLANE('',#1188);+#1188 = AXIS2_PLACEMENT_3D('',#1189,#1190,#1191);+#1189 = CARTESIAN_POINT('',(2.65,-3.9,1.175));+#1190 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1191 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1192 = DEFINITIONAL_REPRESENTATION('',(#1193),#1197);+#1193 = LINE('',#1194,#1195);+#1194 = CARTESIAN_POINT('',(-0.,-0.15));+#1195 = VECTOR('',#1196,1.);+#1196 = DIRECTION('',(1.,0.));+#1197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1198 = ORIENTED_EDGE('',*,*,#1199,.F.);+#1199 = EDGE_CURVE('',#1149,#1172,#1200,.T.);+#1200 = SURFACE_CURVE('',#1201,(#1204,#1211),.PCURVE_S1.);+#1201 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1202,#1203),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1202 = CARTESIAN_POINT('',(2.453385180455,-3.801692590228,0.1));+#1203 = CARTESIAN_POINT('',(2.65,-3.9,1.025));+#1204 = PCURVE('',#1133,#1205);+#1205 = DEFINITIONAL_REPRESENTATION('',(#1206),#1210);+#1206 = LINE('',#1207,#1208);+#1207 = CARTESIAN_POINT('',(4.011560321828E-16,-8.073379085605E-17));+#1208 = VECTOR('',#1209,1.);+#1209 = DIRECTION('',(-7.038885401928E-16,1.));+#1210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1211 = PCURVE('',#1212,#1217);+#1212 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1213,#1214)+ ,(#1215,#1216+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.8),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#1213 = CARTESIAN_POINT('',(2.453385180455,3.801692590228,0.1));+#1214 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1215 = CARTESIAN_POINT('',(2.453385180455,-3.801692590228,0.1));+#1216 = CARTESIAN_POINT('',(2.65,-3.9,1.025));+#1217 = DEFINITIONAL_REPRESENTATION('',(#1218),#1222);+#1218 = LINE('',#1219,#1220);+#1219 = CARTESIAN_POINT('',(7.8,-1.278723939907E-17));+#1220 = VECTOR('',#1221,1.);+#1221 = DIRECTION('',(8.881784197001E-16,1.));+#1222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1223 = ADVANCED_FACE('',(#1224),#1212,.F.);+#1224 = FACE_BOUND('',#1225,.F.);+#1225 = EDGE_LOOP('',(#1226,#1248,#1249,#1277,#1305,#1333,#1361,#1389,+ #1417,#1445,#1473,#1501,#1529,#1557,#1585,#1613,#1641,#1669,#1697,+ #1725,#1753,#1781,#1809,#1837,#1865,#1893,#1921,#1949));+#1226 = ORIENTED_EDGE('',*,*,#1227,.T.);+#1227 = EDGE_CURVE('',#1228,#1149,#1230,.T.);+#1228 = VERTEX_POINT('',#1229);+#1229 = CARTESIAN_POINT('',(2.453385180455,3.801692590228,0.1));+#1230 = SURFACE_CURVE('',#1231,(#1235,#1241),.PCURVE_S1.);+#1231 = LINE('',#1232,#1233);+#1232 = CARTESIAN_POINT('',(2.453385180455,3.801692590228,0.1));+#1233 = VECTOR('',#1234,1.);+#1234 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1235 = PCURVE('',#1212,#1236);+#1236 = DEFINITIONAL_REPRESENTATION('',(#1237),#1240);+#1237 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1238,#1239),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,7.603385180456),.PIECEWISE_BEZIER_KNOTS.);+#1238 = CARTESIAN_POINT('',(3.477438376939E-16,-2.989168682949E-17));+#1239 = CARTESIAN_POINT('',(7.8,1.881754035765E-16));+#1240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1241 = PCURVE('',#65,#1242);+#1242 = DEFINITIONAL_REPRESENTATION('',(#1243),#1247);+#1243 = LINE('',#1244,#1245);+#1244 = CARTESIAN_POINT('',(2.566784100709,4.063340146427));+#1245 = VECTOR('',#1246,1.);+#1246 = DIRECTION('',(0.856556166491,-0.516053808867));+#1247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1248 = ORIENTED_EDGE('',*,*,#1199,.T.);+#1249 = ORIENTED_EDGE('',*,*,#1250,.F.);+#1250 = EDGE_CURVE('',#1251,#1172,#1253,.T.);+#1251 = VERTEX_POINT('',#1252);+#1252 = CARTESIAN_POINT('',(2.65,-3.725,1.025));+#1253 = SURFACE_CURVE('',#1254,(#1258,#1265),.PCURVE_S1.);+#1254 = LINE('',#1255,#1256);+#1255 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1256 = VECTOR('',#1257,1.);+#1257 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1258 = PCURVE('',#1212,#1259);+#1259 = DEFINITIONAL_REPRESENTATION('',(#1260),#1264);+#1260 = LINE('',#1261,#1262);+#1261 = CARTESIAN_POINT('',(0.,1.));+#1262 = VECTOR('',#1263,1.);+#1263 = DIRECTION('',(1.,0.));+#1264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1265 = PCURVE('',#1266,#1271);+#1266 = PLANE('',#1267);+#1267 = AXIS2_PLACEMENT_3D('',#1268,#1269,#1270);+#1268 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1269 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1270 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1271 = DEFINITIONAL_REPRESENTATION('',(#1272),#1276);+#1272 = LINE('',#1273,#1274);+#1273 = CARTESIAN_POINT('',(0.,-0.15));+#1274 = VECTOR('',#1275,1.);+#1275 = DIRECTION('',(1.,0.));+#1276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1277 = ORIENTED_EDGE('',*,*,#1278,.F.);+#1278 = EDGE_CURVE('',#1279,#1251,#1281,.T.);+#1279 = VERTEX_POINT('',#1280);+#1280 = CARTESIAN_POINT('',(2.65,-3.425,1.025));+#1281 = SURFACE_CURVE('',#1282,(#1286,#1293),.PCURVE_S1.);+#1282 = LINE('',#1283,#1284);+#1283 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1284 = VECTOR('',#1285,1.);+#1285 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1286 = PCURVE('',#1212,#1287);+#1287 = DEFINITIONAL_REPRESENTATION('',(#1288),#1292);+#1288 = LINE('',#1289,#1290);+#1289 = CARTESIAN_POINT('',(0.,1.));+#1290 = VECTOR('',#1291,1.);+#1291 = DIRECTION('',(1.,0.));+#1292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1293 = PCURVE('',#1294,#1299);+#1294 = PLANE('',#1295);+#1295 = AXIS2_PLACEMENT_3D('',#1296,#1297,#1298);+#1296 = CARTESIAN_POINT('',(2.55,-3.425,1.025));+#1297 = DIRECTION('',(0.,0.,1.));+#1298 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1299 = DEFINITIONAL_REPRESENTATION('',(#1300),#1304);+#1300 = LINE('',#1301,#1302);+#1301 = CARTESIAN_POINT('',(0.1,7.325));+#1302 = VECTOR('',#1303,1.);+#1303 = DIRECTION('',(0.,-1.));+#1304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1305 = ORIENTED_EDGE('',*,*,#1306,.F.);+#1306 = EDGE_CURVE('',#1307,#1279,#1309,.T.);+#1307 = VERTEX_POINT('',#1308);+#1308 = CARTESIAN_POINT('',(2.65,-3.075,1.025));+#1309 = SURFACE_CURVE('',#1310,(#1314,#1321),.PCURVE_S1.);+#1310 = LINE('',#1311,#1312);+#1311 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1312 = VECTOR('',#1313,1.);+#1313 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1314 = PCURVE('',#1212,#1315);+#1315 = DEFINITIONAL_REPRESENTATION('',(#1316),#1320);+#1316 = LINE('',#1317,#1318);+#1317 = CARTESIAN_POINT('',(0.,1.));+#1318 = VECTOR('',#1319,1.);+#1319 = DIRECTION('',(1.,0.));+#1320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1321 = PCURVE('',#1322,#1327);+#1322 = PLANE('',#1323);+#1323 = AXIS2_PLACEMENT_3D('',#1324,#1325,#1326);+#1324 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1325 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1326 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1327 = DEFINITIONAL_REPRESENTATION('',(#1328),#1332);+#1328 = LINE('',#1329,#1330);+#1329 = CARTESIAN_POINT('',(0.,-0.15));+#1330 = VECTOR('',#1331,1.);+#1331 = DIRECTION('',(1.,0.));+#1332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1333 = ORIENTED_EDGE('',*,*,#1334,.F.);+#1334 = EDGE_CURVE('',#1335,#1307,#1337,.T.);+#1335 = VERTEX_POINT('',#1336);+#1336 = CARTESIAN_POINT('',(2.65,-2.775,1.025));+#1337 = SURFACE_CURVE('',#1338,(#1342,#1349),.PCURVE_S1.);+#1338 = LINE('',#1339,#1340);+#1339 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1340 = VECTOR('',#1341,1.);+#1341 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1342 = PCURVE('',#1212,#1343);+#1343 = DEFINITIONAL_REPRESENTATION('',(#1344),#1348);+#1344 = LINE('',#1345,#1346);+#1345 = CARTESIAN_POINT('',(0.,1.));+#1346 = VECTOR('',#1347,1.);+#1347 = DIRECTION('',(1.,0.));+#1348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1349 = PCURVE('',#1350,#1355);+#1350 = PLANE('',#1351);+#1351 = AXIS2_PLACEMENT_3D('',#1352,#1353,#1354);+#1352 = CARTESIAN_POINT('',(2.55,-2.775,1.025));+#1353 = DIRECTION('',(0.,0.,1.));+#1354 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1355 = DEFINITIONAL_REPRESENTATION('',(#1356),#1360);+#1356 = LINE('',#1357,#1358);+#1357 = CARTESIAN_POINT('',(0.1,6.675));+#1358 = VECTOR('',#1359,1.);+#1359 = DIRECTION('',(0.,-1.));+#1360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1361 = ORIENTED_EDGE('',*,*,#1362,.F.);+#1362 = EDGE_CURVE('',#1363,#1335,#1365,.T.);+#1363 = VERTEX_POINT('',#1364);+#1364 = CARTESIAN_POINT('',(2.65,-2.425,1.025));+#1365 = SURFACE_CURVE('',#1366,(#1370,#1377),.PCURVE_S1.);+#1366 = LINE('',#1367,#1368);+#1367 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1368 = VECTOR('',#1369,1.);+#1369 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1370 = PCURVE('',#1212,#1371);+#1371 = DEFINITIONAL_REPRESENTATION('',(#1372),#1376);+#1372 = LINE('',#1373,#1374);+#1373 = CARTESIAN_POINT('',(0.,1.));+#1374 = VECTOR('',#1375,1.);+#1375 = DIRECTION('',(1.,0.));+#1376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1377 = PCURVE('',#1378,#1383);+#1378 = PLANE('',#1379);+#1379 = AXIS2_PLACEMENT_3D('',#1380,#1381,#1382);+#1380 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1381 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1382 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1383 = DEFINITIONAL_REPRESENTATION('',(#1384),#1388);+#1384 = LINE('',#1385,#1386);+#1385 = CARTESIAN_POINT('',(0.,-0.15));+#1386 = VECTOR('',#1387,1.);+#1387 = DIRECTION('',(1.,0.));+#1388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1389 = ORIENTED_EDGE('',*,*,#1390,.F.);+#1390 = EDGE_CURVE('',#1391,#1363,#1393,.T.);+#1391 = VERTEX_POINT('',#1392);+#1392 = CARTESIAN_POINT('',(2.65,-2.125,1.025));+#1393 = SURFACE_CURVE('',#1394,(#1398,#1405),.PCURVE_S1.);+#1394 = LINE('',#1395,#1396);+#1395 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1396 = VECTOR('',#1397,1.);+#1397 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1398 = PCURVE('',#1212,#1399);+#1399 = DEFINITIONAL_REPRESENTATION('',(#1400),#1404);+#1400 = LINE('',#1401,#1402);+#1401 = CARTESIAN_POINT('',(0.,1.));+#1402 = VECTOR('',#1403,1.);+#1403 = DIRECTION('',(1.,0.));+#1404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1405 = PCURVE('',#1406,#1411);+#1406 = PLANE('',#1407);+#1407 = AXIS2_PLACEMENT_3D('',#1408,#1409,#1410);+#1408 = CARTESIAN_POINT('',(2.55,-2.125,1.025));+#1409 = DIRECTION('',(0.,0.,1.));+#1410 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1411 = DEFINITIONAL_REPRESENTATION('',(#1412),#1416);+#1412 = LINE('',#1413,#1414);+#1413 = CARTESIAN_POINT('',(0.1,6.025));+#1414 = VECTOR('',#1415,1.);+#1415 = DIRECTION('',(0.,-1.));+#1416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1417 = ORIENTED_EDGE('',*,*,#1418,.F.);+#1418 = EDGE_CURVE('',#1419,#1391,#1421,.T.);+#1419 = VERTEX_POINT('',#1420);+#1420 = CARTESIAN_POINT('',(2.65,-1.775,1.025));+#1421 = SURFACE_CURVE('',#1422,(#1426,#1433),.PCURVE_S1.);+#1422 = LINE('',#1423,#1424);+#1423 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1424 = VECTOR('',#1425,1.);+#1425 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1426 = PCURVE('',#1212,#1427);+#1427 = DEFINITIONAL_REPRESENTATION('',(#1428),#1432);+#1428 = LINE('',#1429,#1430);+#1429 = CARTESIAN_POINT('',(0.,1.));+#1430 = VECTOR('',#1431,1.);+#1431 = DIRECTION('',(1.,6.344131569287E-16));+#1432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1433 = PCURVE('',#1434,#1439);+#1434 = PLANE('',#1435);+#1435 = AXIS2_PLACEMENT_3D('',#1436,#1437,#1438);+#1436 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1437 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1438 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1439 = DEFINITIONAL_REPRESENTATION('',(#1440),#1444);+#1440 = LINE('',#1441,#1442);+#1441 = CARTESIAN_POINT('',(0.,-0.15));+#1442 = VECTOR('',#1443,1.);+#1443 = DIRECTION('',(1.,0.));+#1444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1445 = ORIENTED_EDGE('',*,*,#1446,.F.);+#1446 = EDGE_CURVE('',#1447,#1419,#1449,.T.);+#1447 = VERTEX_POINT('',#1448);+#1448 = CARTESIAN_POINT('',(2.65,-1.475,1.025));+#1449 = SURFACE_CURVE('',#1450,(#1454,#1461),.PCURVE_S1.);+#1450 = LINE('',#1451,#1452);+#1451 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1452 = VECTOR('',#1453,1.);+#1453 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1454 = PCURVE('',#1212,#1455);+#1455 = DEFINITIONAL_REPRESENTATION('',(#1456),#1460);+#1456 = LINE('',#1457,#1458);+#1457 = CARTESIAN_POINT('',(0.,1.));+#1458 = VECTOR('',#1459,1.);+#1459 = DIRECTION('',(1.,7.401486830834E-16));+#1460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1461 = PCURVE('',#1462,#1467);+#1462 = PLANE('',#1463);+#1463 = AXIS2_PLACEMENT_3D('',#1464,#1465,#1466);+#1464 = CARTESIAN_POINT('',(2.55,-1.475,1.025));+#1465 = DIRECTION('',(0.,0.,1.));+#1466 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1467 = DEFINITIONAL_REPRESENTATION('',(#1468),#1472);+#1468 = LINE('',#1469,#1470);+#1469 = CARTESIAN_POINT('',(0.1,5.375));+#1470 = VECTOR('',#1471,1.);+#1471 = DIRECTION('',(0.,-1.));+#1472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1473 = ORIENTED_EDGE('',*,*,#1474,.F.);+#1474 = EDGE_CURVE('',#1475,#1447,#1477,.T.);+#1475 = VERTEX_POINT('',#1476);+#1476 = CARTESIAN_POINT('',(2.65,-1.125,1.025));+#1477 = SURFACE_CURVE('',#1478,(#1482,#1489),.PCURVE_S1.);+#1478 = LINE('',#1479,#1480);+#1479 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1480 = VECTOR('',#1481,1.);+#1481 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1482 = PCURVE('',#1212,#1483);+#1483 = DEFINITIONAL_REPRESENTATION('',(#1484),#1488);+#1484 = LINE('',#1485,#1486);+#1485 = CARTESIAN_POINT('',(0.,1.));+#1486 = VECTOR('',#1487,1.);+#1487 = DIRECTION('',(1.,6.344131569287E-16));+#1488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1489 = PCURVE('',#1490,#1495);+#1490 = PLANE('',#1491);+#1491 = AXIS2_PLACEMENT_3D('',#1492,#1493,#1494);+#1492 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1493 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1494 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1495 = DEFINITIONAL_REPRESENTATION('',(#1496),#1500);+#1496 = LINE('',#1497,#1498);+#1497 = CARTESIAN_POINT('',(0.,-0.15));+#1498 = VECTOR('',#1499,1.);+#1499 = DIRECTION('',(1.,0.));+#1500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1501 = ORIENTED_EDGE('',*,*,#1502,.F.);+#1502 = EDGE_CURVE('',#1503,#1475,#1505,.T.);+#1503 = VERTEX_POINT('',#1504);+#1504 = CARTESIAN_POINT('',(2.65,-0.825,1.025));+#1505 = SURFACE_CURVE('',#1506,(#1510,#1517),.PCURVE_S1.);+#1506 = LINE('',#1507,#1508);+#1507 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1508 = VECTOR('',#1509,1.);+#1509 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1510 = PCURVE('',#1212,#1511);+#1511 = DEFINITIONAL_REPRESENTATION('',(#1512),#1516);+#1512 = LINE('',#1513,#1514);+#1513 = CARTESIAN_POINT('',(0.,1.));+#1514 = VECTOR('',#1515,1.);+#1515 = DIRECTION('',(1.,7.401486830834E-16));+#1516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1517 = PCURVE('',#1518,#1523);+#1518 = PLANE('',#1519);+#1519 = AXIS2_PLACEMENT_3D('',#1520,#1521,#1522);+#1520 = CARTESIAN_POINT('',(2.55,-0.825,1.025));+#1521 = DIRECTION('',(0.,0.,1.));+#1522 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1523 = DEFINITIONAL_REPRESENTATION('',(#1524),#1528);+#1524 = LINE('',#1525,#1526);+#1525 = CARTESIAN_POINT('',(0.1,4.725));+#1526 = VECTOR('',#1527,1.);+#1527 = DIRECTION('',(0.,-1.));+#1528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1529 = ORIENTED_EDGE('',*,*,#1530,.F.);+#1530 = EDGE_CURVE('',#1531,#1503,#1533,.T.);+#1531 = VERTEX_POINT('',#1532);+#1532 = CARTESIAN_POINT('',(2.65,-0.475,1.025));+#1533 = SURFACE_CURVE('',#1534,(#1538,#1545),.PCURVE_S1.);+#1534 = LINE('',#1535,#1536);+#1535 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1536 = VECTOR('',#1537,1.);+#1537 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1538 = PCURVE('',#1212,#1539);+#1539 = DEFINITIONAL_REPRESENTATION('',(#1540),#1544);+#1540 = LINE('',#1541,#1542);+#1541 = CARTESIAN_POINT('',(0.,1.));+#1542 = VECTOR('',#1543,1.);+#1543 = DIRECTION('',(1.,6.344131569287E-16));+#1544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1545 = PCURVE('',#1546,#1551);+#1546 = PLANE('',#1547);+#1547 = AXIS2_PLACEMENT_3D('',#1548,#1549,#1550);+#1548 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1549 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1550 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1551 = DEFINITIONAL_REPRESENTATION('',(#1552),#1556);+#1552 = LINE('',#1553,#1554);+#1553 = CARTESIAN_POINT('',(0.,-0.15));+#1554 = VECTOR('',#1555,1.);+#1555 = DIRECTION('',(1.,0.));+#1556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1557 = ORIENTED_EDGE('',*,*,#1558,.F.);+#1558 = EDGE_CURVE('',#1559,#1531,#1561,.T.);+#1559 = VERTEX_POINT('',#1560);+#1560 = CARTESIAN_POINT('',(2.65,-0.175,1.025));+#1561 = SURFACE_CURVE('',#1562,(#1566,#1573),.PCURVE_S1.);+#1562 = LINE('',#1563,#1564);+#1563 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1564 = VECTOR('',#1565,1.);+#1565 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1566 = PCURVE('',#1212,#1567);+#1567 = DEFINITIONAL_REPRESENTATION('',(#1568),#1572);+#1568 = LINE('',#1569,#1570);+#1569 = CARTESIAN_POINT('',(0.,1.));+#1570 = VECTOR('',#1571,1.);+#1571 = DIRECTION('',(1.,7.401486830834E-16));+#1572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1573 = PCURVE('',#1574,#1579);+#1574 = PLANE('',#1575);+#1575 = AXIS2_PLACEMENT_3D('',#1576,#1577,#1578);+#1576 = CARTESIAN_POINT('',(2.55,-0.175,1.025));+#1577 = DIRECTION('',(0.,0.,1.));+#1578 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1579 = DEFINITIONAL_REPRESENTATION('',(#1580),#1584);+#1580 = LINE('',#1581,#1582);+#1581 = CARTESIAN_POINT('',(0.1,4.075));+#1582 = VECTOR('',#1583,1.);+#1583 = DIRECTION('',(0.,-1.));+#1584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1585 = ORIENTED_EDGE('',*,*,#1586,.F.);+#1586 = EDGE_CURVE('',#1587,#1559,#1589,.T.);+#1587 = VERTEX_POINT('',#1588);+#1588 = CARTESIAN_POINT('',(2.65,0.175,1.025));+#1589 = SURFACE_CURVE('',#1590,(#1594,#1601),.PCURVE_S1.);+#1590 = LINE('',#1591,#1592);+#1591 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1592 = VECTOR('',#1593,1.);+#1593 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1594 = PCURVE('',#1212,#1595);+#1595 = DEFINITIONAL_REPRESENTATION('',(#1596),#1600);+#1596 = LINE('',#1597,#1598);+#1597 = CARTESIAN_POINT('',(0.,1.));+#1598 = VECTOR('',#1599,1.);+#1599 = DIRECTION('',(1.,6.344131569287E-16));+#1600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1601 = PCURVE('',#1602,#1607);+#1602 = PLANE('',#1603);+#1603 = AXIS2_PLACEMENT_3D('',#1604,#1605,#1606);+#1604 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1605 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1606 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1607 = DEFINITIONAL_REPRESENTATION('',(#1608),#1612);+#1608 = LINE('',#1609,#1610);+#1609 = CARTESIAN_POINT('',(0.,-0.15));+#1610 = VECTOR('',#1611,1.);+#1611 = DIRECTION('',(1.,0.));+#1612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1613 = ORIENTED_EDGE('',*,*,#1614,.F.);+#1614 = EDGE_CURVE('',#1615,#1587,#1617,.T.);+#1615 = VERTEX_POINT('',#1616);+#1616 = CARTESIAN_POINT('',(2.65,0.475,1.025));+#1617 = SURFACE_CURVE('',#1618,(#1622,#1629),.PCURVE_S1.);+#1618 = LINE('',#1619,#1620);+#1619 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1620 = VECTOR('',#1621,1.);+#1621 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1622 = PCURVE('',#1212,#1623);+#1623 = DEFINITIONAL_REPRESENTATION('',(#1624),#1628);+#1624 = LINE('',#1625,#1626);+#1625 = CARTESIAN_POINT('',(0.,1.));+#1626 = VECTOR('',#1627,1.);+#1627 = DIRECTION('',(1.,7.401486830834E-16));+#1628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1629 = PCURVE('',#1630,#1635);+#1630 = PLANE('',#1631);+#1631 = AXIS2_PLACEMENT_3D('',#1632,#1633,#1634);+#1632 = CARTESIAN_POINT('',(2.55,0.475,1.025));+#1633 = DIRECTION('',(0.,0.,1.));+#1634 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1635 = DEFINITIONAL_REPRESENTATION('',(#1636),#1640);+#1636 = LINE('',#1637,#1638);+#1637 = CARTESIAN_POINT('',(0.1,3.425));+#1638 = VECTOR('',#1639,1.);+#1639 = DIRECTION('',(0.,-1.));+#1640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1641 = ORIENTED_EDGE('',*,*,#1642,.F.);+#1642 = EDGE_CURVE('',#1643,#1615,#1645,.T.);+#1643 = VERTEX_POINT('',#1644);+#1644 = CARTESIAN_POINT('',(2.65,0.825,1.025));+#1645 = SURFACE_CURVE('',#1646,(#1650,#1657),.PCURVE_S1.);+#1646 = LINE('',#1647,#1648);+#1647 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1648 = VECTOR('',#1649,1.);+#1649 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1650 = PCURVE('',#1212,#1651);+#1651 = DEFINITIONAL_REPRESENTATION('',(#1652),#1656);+#1652 = LINE('',#1653,#1654);+#1653 = CARTESIAN_POINT('',(0.,1.));+#1654 = VECTOR('',#1655,1.);+#1655 = DIRECTION('',(1.,6.344131569287E-16));+#1656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1657 = PCURVE('',#1658,#1663);+#1658 = PLANE('',#1659);+#1659 = AXIS2_PLACEMENT_3D('',#1660,#1661,#1662);+#1660 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1661 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1662 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1663 = DEFINITIONAL_REPRESENTATION('',(#1664),#1668);+#1664 = LINE('',#1665,#1666);+#1665 = CARTESIAN_POINT('',(0.,-0.15));+#1666 = VECTOR('',#1667,1.);+#1667 = DIRECTION('',(1.,0.));+#1668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1669 = ORIENTED_EDGE('',*,*,#1670,.F.);+#1670 = EDGE_CURVE('',#1671,#1643,#1673,.T.);+#1671 = VERTEX_POINT('',#1672);+#1672 = CARTESIAN_POINT('',(2.65,1.125,1.025));+#1673 = SURFACE_CURVE('',#1674,(#1678,#1685),.PCURVE_S1.);+#1674 = LINE('',#1675,#1676);+#1675 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1676 = VECTOR('',#1677,1.);+#1677 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1678 = PCURVE('',#1212,#1679);+#1679 = DEFINITIONAL_REPRESENTATION('',(#1680),#1684);+#1680 = LINE('',#1681,#1682);+#1681 = CARTESIAN_POINT('',(0.,1.));+#1682 = VECTOR('',#1683,1.);+#1683 = DIRECTION('',(1.,7.401486830834E-16));+#1684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1685 = PCURVE('',#1686,#1691);+#1686 = PLANE('',#1687);+#1687 = AXIS2_PLACEMENT_3D('',#1688,#1689,#1690);+#1688 = CARTESIAN_POINT('',(2.55,1.125,1.025));+#1689 = DIRECTION('',(0.,0.,1.));+#1690 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1691 = DEFINITIONAL_REPRESENTATION('',(#1692),#1696);+#1692 = LINE('',#1693,#1694);+#1693 = CARTESIAN_POINT('',(0.1,2.775));+#1694 = VECTOR('',#1695,1.);+#1695 = DIRECTION('',(0.,-1.));+#1696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1697 = ORIENTED_EDGE('',*,*,#1698,.F.);+#1698 = EDGE_CURVE('',#1699,#1671,#1701,.T.);+#1699 = VERTEX_POINT('',#1700);+#1700 = CARTESIAN_POINT('',(2.65,1.475,1.025));+#1701 = SURFACE_CURVE('',#1702,(#1706,#1713),.PCURVE_S1.);+#1702 = LINE('',#1703,#1704);+#1703 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1704 = VECTOR('',#1705,1.);+#1705 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1706 = PCURVE('',#1212,#1707);+#1707 = DEFINITIONAL_REPRESENTATION('',(#1708),#1712);+#1708 = LINE('',#1709,#1710);+#1709 = CARTESIAN_POINT('',(0.,1.));+#1710 = VECTOR('',#1711,1.);+#1711 = DIRECTION('',(1.,6.344131569287E-16));+#1712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1713 = PCURVE('',#1714,#1719);+#1714 = PLANE('',#1715);+#1715 = AXIS2_PLACEMENT_3D('',#1716,#1717,#1718);+#1716 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1717 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1718 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1719 = DEFINITIONAL_REPRESENTATION('',(#1720),#1724);+#1720 = LINE('',#1721,#1722);+#1721 = CARTESIAN_POINT('',(0.,-0.15));+#1722 = VECTOR('',#1723,1.);+#1723 = DIRECTION('',(1.,0.));+#1724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1725 = ORIENTED_EDGE('',*,*,#1726,.F.);+#1726 = EDGE_CURVE('',#1727,#1699,#1729,.T.);+#1727 = VERTEX_POINT('',#1728);+#1728 = CARTESIAN_POINT('',(2.65,1.775,1.025));+#1729 = SURFACE_CURVE('',#1730,(#1734,#1741),.PCURVE_S1.);+#1730 = LINE('',#1731,#1732);+#1731 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1732 = VECTOR('',#1733,1.);+#1733 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1734 = PCURVE('',#1212,#1735);+#1735 = DEFINITIONAL_REPRESENTATION('',(#1736),#1740);+#1736 = LINE('',#1737,#1738);+#1737 = CARTESIAN_POINT('',(0.,1.));+#1738 = VECTOR('',#1739,1.);+#1739 = DIRECTION('',(1.,7.401486830834E-16));+#1740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1741 = PCURVE('',#1742,#1747);+#1742 = PLANE('',#1743);+#1743 = AXIS2_PLACEMENT_3D('',#1744,#1745,#1746);+#1744 = CARTESIAN_POINT('',(2.55,1.775,1.025));+#1745 = DIRECTION('',(0.,0.,1.));+#1746 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1747 = DEFINITIONAL_REPRESENTATION('',(#1748),#1752);+#1748 = LINE('',#1749,#1750);+#1749 = CARTESIAN_POINT('',(0.1,2.125));+#1750 = VECTOR('',#1751,1.);+#1751 = DIRECTION('',(0.,-1.));+#1752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1753 = ORIENTED_EDGE('',*,*,#1754,.F.);+#1754 = EDGE_CURVE('',#1755,#1727,#1757,.T.);+#1755 = VERTEX_POINT('',#1756);+#1756 = CARTESIAN_POINT('',(2.65,2.125,1.025));+#1757 = SURFACE_CURVE('',#1758,(#1762,#1769),.PCURVE_S1.);+#1758 = LINE('',#1759,#1760);+#1759 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1760 = VECTOR('',#1761,1.);+#1761 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1762 = PCURVE('',#1212,#1763);+#1763 = DEFINITIONAL_REPRESENTATION('',(#1764),#1768);+#1764 = LINE('',#1765,#1766);+#1765 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#1766 = VECTOR('',#1767,1.);+#1767 = DIRECTION('',(1.,6.344131569287E-16));+#1768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1769 = PCURVE('',#1770,#1775);+#1770 = PLANE('',#1771);+#1771 = AXIS2_PLACEMENT_3D('',#1772,#1773,#1774);+#1772 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1773 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1774 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1775 = DEFINITIONAL_REPRESENTATION('',(#1776),#1780);+#1776 = LINE('',#1777,#1778);+#1777 = CARTESIAN_POINT('',(0.,-0.15));+#1778 = VECTOR('',#1779,1.);+#1779 = DIRECTION('',(1.,0.));+#1780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1781 = ORIENTED_EDGE('',*,*,#1782,.F.);+#1782 = EDGE_CURVE('',#1783,#1755,#1785,.T.);+#1783 = VERTEX_POINT('',#1784);+#1784 = CARTESIAN_POINT('',(2.65,2.425,1.025));+#1785 = SURFACE_CURVE('',#1786,(#1790,#1797),.PCURVE_S1.);+#1786 = LINE('',#1787,#1788);+#1787 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1788 = VECTOR('',#1789,1.);+#1789 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1790 = PCURVE('',#1212,#1791);+#1791 = DEFINITIONAL_REPRESENTATION('',(#1792),#1796);+#1792 = LINE('',#1793,#1794);+#1793 = CARTESIAN_POINT('',(-2.22044604925E-16,1.));+#1794 = VECTOR('',#1795,1.);+#1795 = DIRECTION('',(1.,0.));+#1796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1797 = PCURVE('',#1798,#1803);+#1798 = PLANE('',#1799);+#1799 = AXIS2_PLACEMENT_3D('',#1800,#1801,#1802);+#1800 = CARTESIAN_POINT('',(2.55,2.425,1.025));+#1801 = DIRECTION('',(0.,0.,1.));+#1802 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1803 = DEFINITIONAL_REPRESENTATION('',(#1804),#1808);+#1804 = LINE('',#1805,#1806);+#1805 = CARTESIAN_POINT('',(0.1,1.475));+#1806 = VECTOR('',#1807,1.);+#1807 = DIRECTION('',(0.,-1.));+#1808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1809 = ORIENTED_EDGE('',*,*,#1810,.F.);+#1810 = EDGE_CURVE('',#1811,#1783,#1813,.T.);+#1811 = VERTEX_POINT('',#1812);+#1812 = CARTESIAN_POINT('',(2.65,2.775,1.025));+#1813 = SURFACE_CURVE('',#1814,(#1818,#1825),.PCURVE_S1.);+#1814 = LINE('',#1815,#1816);+#1815 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1816 = VECTOR('',#1817,1.);+#1817 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1818 = PCURVE('',#1212,#1819);+#1819 = DEFINITIONAL_REPRESENTATION('',(#1820),#1824);+#1820 = LINE('',#1821,#1822);+#1821 = CARTESIAN_POINT('',(0.,1.));+#1822 = VECTOR('',#1823,1.);+#1823 = DIRECTION('',(1.,0.));+#1824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1825 = PCURVE('',#1826,#1831);+#1826 = PLANE('',#1827);+#1827 = AXIS2_PLACEMENT_3D('',#1828,#1829,#1830);+#1828 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1829 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1830 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1831 = DEFINITIONAL_REPRESENTATION('',(#1832),#1836);+#1832 = LINE('',#1833,#1834);+#1833 = CARTESIAN_POINT('',(0.,-0.15));+#1834 = VECTOR('',#1835,1.);+#1835 = DIRECTION('',(1.,0.));+#1836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1837 = ORIENTED_EDGE('',*,*,#1838,.F.);+#1838 = EDGE_CURVE('',#1839,#1811,#1841,.T.);+#1839 = VERTEX_POINT('',#1840);+#1840 = CARTESIAN_POINT('',(2.65,3.075,1.025));+#1841 = SURFACE_CURVE('',#1842,(#1846,#1853),.PCURVE_S1.);+#1842 = LINE('',#1843,#1844);+#1843 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1844 = VECTOR('',#1845,1.);+#1845 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1846 = PCURVE('',#1212,#1847);+#1847 = DEFINITIONAL_REPRESENTATION('',(#1848),#1852);+#1848 = LINE('',#1849,#1850);+#1849 = CARTESIAN_POINT('',(1.110223024625E-16,1.));+#1850 = VECTOR('',#1851,1.);+#1851 = DIRECTION('',(1.,0.));+#1852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1853 = PCURVE('',#1854,#1859);+#1854 = PLANE('',#1855);+#1855 = AXIS2_PLACEMENT_3D('',#1856,#1857,#1858);+#1856 = CARTESIAN_POINT('',(2.55,3.075,1.025));+#1857 = DIRECTION('',(0.,0.,1.));+#1858 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1859 = DEFINITIONAL_REPRESENTATION('',(#1860),#1864);+#1860 = LINE('',#1861,#1862);+#1861 = CARTESIAN_POINT('',(0.1,0.825));+#1862 = VECTOR('',#1863,1.);+#1863 = DIRECTION('',(0.,-1.));+#1864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1865 = ORIENTED_EDGE('',*,*,#1866,.F.);+#1866 = EDGE_CURVE('',#1867,#1839,#1869,.T.);+#1867 = VERTEX_POINT('',#1868);+#1868 = CARTESIAN_POINT('',(2.65,3.425,1.025));+#1869 = SURFACE_CURVE('',#1870,(#1874,#1881),.PCURVE_S1.);+#1870 = LINE('',#1871,#1872);+#1871 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1872 = VECTOR('',#1873,1.);+#1873 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1874 = PCURVE('',#1212,#1875);+#1875 = DEFINITIONAL_REPRESENTATION('',(#1876),#1880);+#1876 = LINE('',#1877,#1878);+#1877 = CARTESIAN_POINT('',(-5.551115123126E-17,1.));+#1878 = VECTOR('',#1879,1.);+#1879 = DIRECTION('',(1.,0.));+#1880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1881 = PCURVE('',#1882,#1887);+#1882 = PLANE('',#1883);+#1883 = AXIS2_PLACEMENT_3D('',#1884,#1885,#1886);+#1884 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1885 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1886 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1887 = DEFINITIONAL_REPRESENTATION('',(#1888),#1892);+#1888 = LINE('',#1889,#1890);+#1889 = CARTESIAN_POINT('',(0.,-0.15));+#1890 = VECTOR('',#1891,1.);+#1891 = DIRECTION('',(1.,0.));+#1892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1893 = ORIENTED_EDGE('',*,*,#1894,.F.);+#1894 = EDGE_CURVE('',#1895,#1867,#1897,.T.);+#1895 = VERTEX_POINT('',#1896);+#1896 = CARTESIAN_POINT('',(2.65,3.725,1.025));+#1897 = SURFACE_CURVE('',#1898,(#1902,#1909),.PCURVE_S1.);+#1898 = LINE('',#1899,#1900);+#1899 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1900 = VECTOR('',#1901,1.);+#1901 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1902 = PCURVE('',#1212,#1903);+#1903 = DEFINITIONAL_REPRESENTATION('',(#1904),#1908);+#1904 = LINE('',#1905,#1906);+#1905 = CARTESIAN_POINT('',(1.387778780781E-16,1.));+#1906 = VECTOR('',#1907,1.);+#1907 = DIRECTION('',(1.,0.));+#1908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1909 = PCURVE('',#1910,#1915);+#1910 = PLANE('',#1911);+#1911 = AXIS2_PLACEMENT_3D('',#1912,#1913,#1914);+#1912 = CARTESIAN_POINT('',(2.55,3.725,1.025));+#1913 = DIRECTION('',(0.,0.,1.));+#1914 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1915 = DEFINITIONAL_REPRESENTATION('',(#1916),#1920);+#1916 = LINE('',#1917,#1918);+#1917 = CARTESIAN_POINT('',(0.1,0.175));+#1918 = VECTOR('',#1919,1.);+#1919 = DIRECTION('',(0.,-1.));+#1920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1921 = ORIENTED_EDGE('',*,*,#1922,.F.);+#1922 = EDGE_CURVE('',#1923,#1895,#1925,.T.);+#1923 = VERTEX_POINT('',#1924);+#1924 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1925 = SURFACE_CURVE('',#1926,(#1930,#1937),.PCURVE_S1.);+#1926 = LINE('',#1927,#1928);+#1927 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1928 = VECTOR('',#1929,1.);+#1929 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1930 = PCURVE('',#1212,#1931);+#1931 = DEFINITIONAL_REPRESENTATION('',(#1932),#1936);+#1932 = LINE('',#1933,#1934);+#1933 = CARTESIAN_POINT('',(2.210208642786E-16,1.));+#1934 = VECTOR('',#1935,1.);+#1935 = DIRECTION('',(1.,0.));+#1936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1937 = PCURVE('',#1938,#1943);+#1938 = PLANE('',#1939);+#1939 = AXIS2_PLACEMENT_3D('',#1940,#1941,#1942);+#1940 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1941 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1942 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1943 = DEFINITIONAL_REPRESENTATION('',(#1944),#1948);+#1944 = LINE('',#1945,#1946);+#1945 = CARTESIAN_POINT('',(0.,-0.15));+#1946 = VECTOR('',#1947,1.);+#1947 = DIRECTION('',(1.,0.));+#1948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1949 = ORIENTED_EDGE('',*,*,#1950,.F.);+#1950 = EDGE_CURVE('',#1228,#1923,#1951,.T.);+#1951 = SURFACE_CURVE('',#1952,(#1955,#1962),.PCURVE_S1.);+#1952 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1953,#1954),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1953 = CARTESIAN_POINT('',(2.453385180455,3.801692590228,0.1));+#1954 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1955 = PCURVE('',#1212,#1956);+#1956 = DEFINITIONAL_REPRESENTATION('',(#1957),#1961);+#1957 = LINE('',#1958,#1959);+#1958 = CARTESIAN_POINT('',(3.477438376939E-16,-2.989168682949E-17));+#1959 = VECTOR('',#1960,1.);+#1960 = DIRECTION('',(-1.171245910644E-16,1.));+#1961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1962 = PCURVE('',#92,#1963);+#1963 = DEFINITIONAL_REPRESENTATION('',(#1964),#1968);+#1964 = LINE('',#1965,#1966);+#1965 = CARTESIAN_POINT('',(0.282842712475,-2.650020471122E-17));+#1966 = VECTOR('',#1967,1.);+#1967 = DIRECTION('',(1.110223024625E-16,1.));+#1968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1969 = ADVANCED_FACE('',(#1970),#1938,.F.);+#1970 = FACE_BOUND('',#1971,.F.);+#1971 = EDGE_LOOP('',(#1972,#1997,#1998,#2026));+#1972 = ORIENTED_EDGE('',*,*,#1973,.F.);+#1973 = EDGE_CURVE('',#1923,#1974,#1976,.T.);+#1974 = VERTEX_POINT('',#1975);+#1975 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1976 = SURFACE_CURVE('',#1977,(#1980,#1986),.PCURVE_S1.);+#1977 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1978,#1979),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1978 = CARTESIAN_POINT('',(2.65,3.9,1.025));+#1979 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#1980 = PCURVE('',#1938,#1981);+#1981 = DEFINITIONAL_REPRESENTATION('',(#1982),#1985);+#1982 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1983,#1984),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1983 = CARTESIAN_POINT('',(0.,-0.15));+#1984 = CARTESIAN_POINT('',(0.,0.));+#1985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1986 = PCURVE('',#1987,#1992);+#1987 = PLANE('',#1988);+#1988 = AXIS2_PLACEMENT_3D('',#1989,#1990,#1991);+#1989 = CARTESIAN_POINT('',(2.45,4.1,1.175));+#1990 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1991 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1992 = DEFINITIONAL_REPRESENTATION('',(#1993),#1996);+#1993 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1994,#1995),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1994 = CARTESIAN_POINT('',(0.282842712475,-0.15));+#1995 = CARTESIAN_POINT('',(0.282842712475,0.));+#1996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1997 = ORIENTED_EDGE('',*,*,#1922,.T.);+#1998 = ORIENTED_EDGE('',*,*,#1999,.T.);+#1999 = EDGE_CURVE('',#1895,#2000,#2002,.T.);+#2000 = VERTEX_POINT('',#2001);+#2001 = CARTESIAN_POINT('',(2.65,3.725,1.175));+#2002 = SURFACE_CURVE('',#2003,(#2007,#2014),.PCURVE_S1.);+#2003 = LINE('',#2004,#2005);+#2004 = CARTESIAN_POINT('',(2.65,3.725,0.91739845469));+#2005 = VECTOR('',#2006,1.);+#2006 = DIRECTION('',(0.,0.,1.));+#2007 = PCURVE('',#1938,#2008);+#2008 = DEFINITIONAL_REPRESENTATION('',(#2009),#2013);+#2009 = LINE('',#2010,#2011);+#2010 = CARTESIAN_POINT('',(0.175,-0.25760154531));+#2011 = VECTOR('',#2012,1.);+#2012 = DIRECTION('',(0.,1.));+#2013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2014 = PCURVE('',#2015,#2020);+#2015 = PLANE('',#2016);+#2016 = AXIS2_PLACEMENT_3D('',#2017,#2018,#2019);+#2017 = CARTESIAN_POINT('',(3.278710000798,3.725,0.659796909381));+#2018 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2019 = DIRECTION('',(0.,0.,1.));+#2020 = DEFINITIONAL_REPRESENTATION('',(#2021),#2025);+#2021 = LINE('',#2022,#2023);+#2022 = CARTESIAN_POINT('',(0.257601545309,0.628710000798));+#2023 = VECTOR('',#2024,1.);+#2024 = DIRECTION('',(1.,0.));+#2025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2026 = ORIENTED_EDGE('',*,*,#2027,.F.);+#2027 = EDGE_CURVE('',#1974,#2000,#2028,.T.);+#2028 = SURFACE_CURVE('',#2029,(#2033,#2040),.PCURVE_S1.);+#2029 = LINE('',#2030,#2031);+#2030 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2031 = VECTOR('',#2032,1.);+#2032 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2033 = PCURVE('',#1938,#2034);+#2034 = DEFINITIONAL_REPRESENTATION('',(#2035),#2039);+#2035 = LINE('',#2036,#2037);+#2036 = CARTESIAN_POINT('',(0.,0.));+#2037 = VECTOR('',#2038,1.);+#2038 = DIRECTION('',(1.,0.));+#2039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2040 = PCURVE('',#2041,#2046);+#2041 = PLANE('',#2042);+#2042 = AXIS2_PLACEMENT_3D('',#2043,#2044,#2045);+#2043 = CARTESIAN_POINT('',(-5.184787401984E-16,4.075,1.175));+#2044 = DIRECTION('',(-3.429029865879E-33,-1.271304764612E-27,-1.));+#2045 = DIRECTION('',(1.,1.229194726629E-16,-3.429029866035E-33));+#2046 = DEFINITIONAL_REPRESENTATION('',(#2047),#2051);+#2047 = LINE('',#2048,#2049);+#2048 = CARTESIAN_POINT('',(2.65,0.175));+#2049 = VECTOR('',#2050,1.);+#2050 = DIRECTION('',(-1.18971702004E-17,1.));+#2051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2052 = ADVANCED_FACE('',(#2053,#4778),#2041,.F.);+#2053 = FACE_BOUND('',#2054,.F.);+#2054 = EDGE_LOOP('',(#2055,#2080,#2103,#2124,#2125,#2148,#2176,#2204,+ #2227,#2255,#2283,#2311,#2334,#2362,#2390,#2418,#2441,#2469,#2497,+ #2525,#2548,#2576,#2604,#2632,#2655,#2683,#2711,#2739,#2762,#2790,+ #2818,#2846,#2869,#2897,#2925,#2953,#2976,#3004,#3032,#3060,#3083,+ #3111,#3139,#3167,#3190,#3218,#3246,#3274,#3297,#3325,#3353,#3381,+ #3404,#3427,#3450,#3473,#3496,#3524,#3552,#3580,#3603,#3631,#3659,+ #3687,#3710,#3738,#3766,#3794,#3817,#3845,#3873,#3901,#3924,#3952,+ #3980,#4008,#4031,#4059,#4087,#4115,#4138,#4166,#4194,#4222,#4245,+ #4273,#4301,#4329,#4352,#4380,#4408,#4436,#4459,#4487,#4515,#4543,+ #4566,#4594,#4622,#4650,#4673,#4701,#4729,#4757));+#2055 = ORIENTED_EDGE('',*,*,#2056,.T.);+#2056 = EDGE_CURVE('',#2057,#2059,#2061,.T.);+#2057 = VERTEX_POINT('',#2058);+#2058 = CARTESIAN_POINT('',(-2.65,3.9,1.175));+#2059 = VERTEX_POINT('',#2060);+#2060 = CARTESIAN_POINT('',(-2.45,4.1,1.175));+#2061 = SURFACE_CURVE('',#2062,(#2066,#2073),.PCURVE_S1.);+#2062 = LINE('',#2063,#2064);+#2063 = CARTESIAN_POINT('',(-2.65,3.9,1.175));+#2064 = VECTOR('',#2065,1.);+#2065 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2066 = PCURVE('',#2041,#2067);+#2067 = DEFINITIONAL_REPRESENTATION('',(#2068),#2072);+#2068 = LINE('',#2069,#2070);+#2069 = CARTESIAN_POINT('',(-2.65,0.175));+#2070 = VECTOR('',#2071,1.);+#2071 = DIRECTION('',(0.707106781187,-0.707106781187));+#2072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2073 = PCURVE('',#199,#2074);+#2074 = DEFINITIONAL_REPRESENTATION('',(#2075),#2079);+#2075 = LINE('',#2076,#2077);+#2076 = CARTESIAN_POINT('',(0.,0.));+#2077 = VECTOR('',#2078,1.);+#2078 = DIRECTION('',(1.,0.));+#2079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2080 = ORIENTED_EDGE('',*,*,#2081,.T.);+#2081 = EDGE_CURVE('',#2059,#2082,#2084,.T.);+#2082 = VERTEX_POINT('',#2083);+#2083 = CARTESIAN_POINT('',(2.45,4.1,1.175));+#2084 = SURFACE_CURVE('',#2085,(#2089,#2096),.PCURVE_S1.);+#2085 = LINE('',#2086,#2087);+#2086 = CARTESIAN_POINT('',(-2.45,4.1,1.175));+#2087 = VECTOR('',#2088,1.);+#2088 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2089 = PCURVE('',#2041,#2090);+#2090 = DEFINITIONAL_REPRESENTATION('',(#2091),#2095);+#2091 = LINE('',#2092,#2093);+#2092 = CARTESIAN_POINT('',(-2.45,-2.5E-02));+#2093 = VECTOR('',#2094,1.);+#2094 = DIRECTION('',(1.,1.18971702004E-17));+#2095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2096 = PCURVE('',#120,#2097);+#2097 = DEFINITIONAL_REPRESENTATION('',(#2098),#2102);+#2098 = LINE('',#2099,#2100);+#2099 = CARTESIAN_POINT('',(0.,0.));+#2100 = VECTOR('',#2101,1.);+#2101 = DIRECTION('',(1.,0.));+#2102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2103 = ORIENTED_EDGE('',*,*,#2104,.T.);+#2104 = EDGE_CURVE('',#2082,#1974,#2105,.T.);+#2105 = SURFACE_CURVE('',#2106,(#2110,#2117),.PCURVE_S1.);+#2106 = LINE('',#2107,#2108);+#2107 = CARTESIAN_POINT('',(2.45,4.1,1.175));+#2108 = VECTOR('',#2109,1.);+#2109 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2110 = PCURVE('',#2041,#2111);+#2111 = DEFINITIONAL_REPRESENTATION('',(#2112),#2116);+#2112 = LINE('',#2113,#2114);+#2113 = CARTESIAN_POINT('',(2.45,-2.5E-02));+#2114 = VECTOR('',#2115,1.);+#2115 = DIRECTION('',(0.707106781187,0.707106781187));+#2116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2117 = PCURVE('',#1987,#2118);+#2118 = DEFINITIONAL_REPRESENTATION('',(#2119),#2123);+#2119 = LINE('',#2120,#2121);+#2120 = CARTESIAN_POINT('',(0.,0.));+#2121 = VECTOR('',#2122,1.);+#2122 = DIRECTION('',(1.,0.));+#2123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2124 = ORIENTED_EDGE('',*,*,#2027,.T.);+#2125 = ORIENTED_EDGE('',*,*,#2126,.F.);+#2126 = EDGE_CURVE('',#2127,#2000,#2129,.T.);+#2127 = VERTEX_POINT('',#2128);+#2128 = CARTESIAN_POINT('',(3.15,3.725,1.175));+#2129 = SURFACE_CURVE('',#2130,(#2134,#2141),.PCURVE_S1.);+#2130 = LINE('',#2131,#2132);+#2131 = CARTESIAN_POINT('',(3.15,3.725,1.175));+#2132 = VECTOR('',#2133,1.);+#2133 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2134 = PCURVE('',#2041,#2135);+#2135 = DEFINITIONAL_REPRESENTATION('',(#2136),#2140);+#2136 = LINE('',#2137,#2138);+#2137 = CARTESIAN_POINT('',(3.15,0.35));+#2138 = VECTOR('',#2139,1.);+#2139 = DIRECTION('',(-1.,-1.18971702004E-17));+#2140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2141 = PCURVE('',#2015,#2142);+#2142 = DEFINITIONAL_REPRESENTATION('',(#2143),#2147);+#2143 = LINE('',#2144,#2145);+#2144 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2145 = VECTOR('',#2146,1.);+#2146 = DIRECTION('',(0.,1.));+#2147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2148 = ORIENTED_EDGE('',*,*,#2149,.T.);+#2149 = EDGE_CURVE('',#2127,#2150,#2152,.T.);+#2150 = VERTEX_POINT('',#2151);+#2151 = CARTESIAN_POINT('',(3.15,3.425,1.175));+#2152 = SURFACE_CURVE('',#2153,(#2157,#2164),.PCURVE_S1.);+#2153 = LINE('',#2154,#2155);+#2154 = CARTESIAN_POINT('',(3.15,3.725,1.175));+#2155 = VECTOR('',#2156,1.);+#2156 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2157 = PCURVE('',#2041,#2158);+#2158 = DEFINITIONAL_REPRESENTATION('',(#2159),#2163);+#2159 = LINE('',#2160,#2161);+#2160 = CARTESIAN_POINT('',(3.15,0.35));+#2161 = VECTOR('',#2162,1.);+#2162 = DIRECTION('',(-1.18971702004E-17,1.));+#2163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2164 = PCURVE('',#2165,#2170);+#2165 = CYLINDRICAL_SURFACE('',#2166,0.25);+#2166 = AXIS2_PLACEMENT_3D('',#2167,#2168,#2169);+#2167 = CARTESIAN_POINT('',(3.15,3.725,0.925));+#2168 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2169 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2170 = DEFINITIONAL_REPRESENTATION('',(#2171),#2175);+#2171 = LINE('',#2172,#2173);+#2172 = CARTESIAN_POINT('',(4.886921905584,0.));+#2173 = VECTOR('',#2174,1.);+#2174 = DIRECTION('',(0.,-1.));+#2175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2176 = ORIENTED_EDGE('',*,*,#2177,.T.);+#2177 = EDGE_CURVE('',#2150,#2178,#2180,.T.);+#2178 = VERTEX_POINT('',#2179);+#2179 = CARTESIAN_POINT('',(2.65,3.425,1.175));+#2180 = SURFACE_CURVE('',#2181,(#2185,#2192),.PCURVE_S1.);+#2181 = LINE('',#2182,#2183);+#2182 = CARTESIAN_POINT('',(3.15,3.425,1.175));+#2183 = VECTOR('',#2184,1.);+#2184 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2185 = PCURVE('',#2041,#2186);+#2186 = DEFINITIONAL_REPRESENTATION('',(#2187),#2191);+#2187 = LINE('',#2188,#2189);+#2188 = CARTESIAN_POINT('',(3.15,0.65));+#2189 = VECTOR('',#2190,1.);+#2190 = DIRECTION('',(-1.,-1.18971702004E-17));+#2191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2192 = PCURVE('',#2193,#2198);+#2193 = PLANE('',#2194);+#2194 = AXIS2_PLACEMENT_3D('',#2195,#2196,#2197);+#2195 = CARTESIAN_POINT('',(3.278710000798,3.425,0.659796909381));+#2196 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2197 = DIRECTION('',(0.,0.,1.));+#2198 = DEFINITIONAL_REPRESENTATION('',(#2199),#2203);+#2199 = LINE('',#2200,#2201);+#2200 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2201 = VECTOR('',#2202,1.);+#2202 = DIRECTION('',(0.,1.));+#2203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2204 = ORIENTED_EDGE('',*,*,#2205,.T.);+#2205 = EDGE_CURVE('',#2178,#2206,#2208,.T.);+#2206 = VERTEX_POINT('',#2207);+#2207 = CARTESIAN_POINT('',(2.65,3.075,1.175));+#2208 = SURFACE_CURVE('',#2209,(#2213,#2220),.PCURVE_S1.);+#2209 = LINE('',#2210,#2211);+#2210 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2211 = VECTOR('',#2212,1.);+#2212 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2213 = PCURVE('',#2041,#2214);+#2214 = DEFINITIONAL_REPRESENTATION('',(#2215),#2219);+#2215 = LINE('',#2216,#2217);+#2216 = CARTESIAN_POINT('',(2.65,0.175));+#2217 = VECTOR('',#2218,1.);+#2218 = DIRECTION('',(-1.18971702004E-17,1.));+#2219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2220 = PCURVE('',#1882,#2221);+#2221 = DEFINITIONAL_REPRESENTATION('',(#2222),#2226);+#2222 = LINE('',#2223,#2224);+#2223 = CARTESIAN_POINT('',(0.,0.));+#2224 = VECTOR('',#2225,1.);+#2225 = DIRECTION('',(1.,0.));+#2226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2227 = ORIENTED_EDGE('',*,*,#2228,.F.);+#2228 = EDGE_CURVE('',#2229,#2206,#2231,.T.);+#2229 = VERTEX_POINT('',#2230);+#2230 = CARTESIAN_POINT('',(3.15,3.075,1.175));+#2231 = SURFACE_CURVE('',#2232,(#2236,#2243),.PCURVE_S1.);+#2232 = LINE('',#2233,#2234);+#2233 = CARTESIAN_POINT('',(3.15,3.075,1.175));+#2234 = VECTOR('',#2235,1.);+#2235 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2236 = PCURVE('',#2041,#2237);+#2237 = DEFINITIONAL_REPRESENTATION('',(#2238),#2242);+#2238 = LINE('',#2239,#2240);+#2239 = CARTESIAN_POINT('',(3.15,1.));+#2240 = VECTOR('',#2241,1.);+#2241 = DIRECTION('',(-1.,-1.18971702004E-17));+#2242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2243 = PCURVE('',#2244,#2249);+#2244 = PLANE('',#2245);+#2245 = AXIS2_PLACEMENT_3D('',#2246,#2247,#2248);+#2246 = CARTESIAN_POINT('',(3.278710000798,3.075,0.659796909381));+#2247 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2248 = DIRECTION('',(0.,0.,1.));+#2249 = DEFINITIONAL_REPRESENTATION('',(#2250),#2254);+#2250 = LINE('',#2251,#2252);+#2251 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2252 = VECTOR('',#2253,1.);+#2253 = DIRECTION('',(0.,1.));+#2254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2255 = ORIENTED_EDGE('',*,*,#2256,.T.);+#2256 = EDGE_CURVE('',#2229,#2257,#2259,.T.);+#2257 = VERTEX_POINT('',#2258);+#2258 = CARTESIAN_POINT('',(3.15,2.775,1.175));+#2259 = SURFACE_CURVE('',#2260,(#2264,#2271),.PCURVE_S1.);+#2260 = LINE('',#2261,#2262);+#2261 = CARTESIAN_POINT('',(3.15,3.075,1.175));+#2262 = VECTOR('',#2263,1.);+#2263 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2264 = PCURVE('',#2041,#2265);+#2265 = DEFINITIONAL_REPRESENTATION('',(#2266),#2270);+#2266 = LINE('',#2267,#2268);+#2267 = CARTESIAN_POINT('',(3.15,1.));+#2268 = VECTOR('',#2269,1.);+#2269 = DIRECTION('',(-1.18971702004E-17,1.));+#2270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2271 = PCURVE('',#2272,#2277);+#2272 = CYLINDRICAL_SURFACE('',#2273,0.25);+#2273 = AXIS2_PLACEMENT_3D('',#2274,#2275,#2276);+#2274 = CARTESIAN_POINT('',(3.15,3.075,0.925));+#2275 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2276 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2277 = DEFINITIONAL_REPRESENTATION('',(#2278),#2282);+#2278 = LINE('',#2279,#2280);+#2279 = CARTESIAN_POINT('',(4.886921905584,0.));+#2280 = VECTOR('',#2281,1.);+#2281 = DIRECTION('',(0.,-1.));+#2282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2283 = ORIENTED_EDGE('',*,*,#2284,.T.);+#2284 = EDGE_CURVE('',#2257,#2285,#2287,.T.);+#2285 = VERTEX_POINT('',#2286);+#2286 = CARTESIAN_POINT('',(2.65,2.775,1.175));+#2287 = SURFACE_CURVE('',#2288,(#2292,#2299),.PCURVE_S1.);+#2288 = LINE('',#2289,#2290);+#2289 = CARTESIAN_POINT('',(3.15,2.775,1.175));+#2290 = VECTOR('',#2291,1.);+#2291 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2292 = PCURVE('',#2041,#2293);+#2293 = DEFINITIONAL_REPRESENTATION('',(#2294),#2298);+#2294 = LINE('',#2295,#2296);+#2295 = CARTESIAN_POINT('',(3.15,1.3));+#2296 = VECTOR('',#2297,1.);+#2297 = DIRECTION('',(-1.,-1.18971702004E-17));+#2298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2299 = PCURVE('',#2300,#2305);+#2300 = PLANE('',#2301);+#2301 = AXIS2_PLACEMENT_3D('',#2302,#2303,#2304);+#2302 = CARTESIAN_POINT('',(3.278710000798,2.775,0.659796909381));+#2303 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2304 = DIRECTION('',(0.,0.,1.));+#2305 = DEFINITIONAL_REPRESENTATION('',(#2306),#2310);+#2306 = LINE('',#2307,#2308);+#2307 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2308 = VECTOR('',#2309,1.);+#2309 = DIRECTION('',(0.,1.));+#2310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2311 = ORIENTED_EDGE('',*,*,#2312,.T.);+#2312 = EDGE_CURVE('',#2285,#2313,#2315,.T.);+#2313 = VERTEX_POINT('',#2314);+#2314 = CARTESIAN_POINT('',(2.65,2.425,1.175));+#2315 = SURFACE_CURVE('',#2316,(#2320,#2327),.PCURVE_S1.);+#2316 = LINE('',#2317,#2318);+#2317 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2318 = VECTOR('',#2319,1.);+#2319 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2320 = PCURVE('',#2041,#2321);+#2321 = DEFINITIONAL_REPRESENTATION('',(#2322),#2326);+#2322 = LINE('',#2323,#2324);+#2323 = CARTESIAN_POINT('',(2.65,0.175));+#2324 = VECTOR('',#2325,1.);+#2325 = DIRECTION('',(-1.18971702004E-17,1.));+#2326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2327 = PCURVE('',#1826,#2328);+#2328 = DEFINITIONAL_REPRESENTATION('',(#2329),#2333);+#2329 = LINE('',#2330,#2331);+#2330 = CARTESIAN_POINT('',(0.,0.));+#2331 = VECTOR('',#2332,1.);+#2332 = DIRECTION('',(1.,0.));+#2333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2334 = ORIENTED_EDGE('',*,*,#2335,.F.);+#2335 = EDGE_CURVE('',#2336,#2313,#2338,.T.);+#2336 = VERTEX_POINT('',#2337);+#2337 = CARTESIAN_POINT('',(3.15,2.425,1.175));+#2338 = SURFACE_CURVE('',#2339,(#2343,#2350),.PCURVE_S1.);+#2339 = LINE('',#2340,#2341);+#2340 = CARTESIAN_POINT('',(3.15,2.425,1.175));+#2341 = VECTOR('',#2342,1.);+#2342 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2343 = PCURVE('',#2041,#2344);+#2344 = DEFINITIONAL_REPRESENTATION('',(#2345),#2349);+#2345 = LINE('',#2346,#2347);+#2346 = CARTESIAN_POINT('',(3.15,1.65));+#2347 = VECTOR('',#2348,1.);+#2348 = DIRECTION('',(-1.,-1.18971702004E-17));+#2349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2350 = PCURVE('',#2351,#2356);+#2351 = PLANE('',#2352);+#2352 = AXIS2_PLACEMENT_3D('',#2353,#2354,#2355);+#2353 = CARTESIAN_POINT('',(3.278710000798,2.425,0.659796909381));+#2354 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2355 = DIRECTION('',(0.,0.,1.));+#2356 = DEFINITIONAL_REPRESENTATION('',(#2357),#2361);+#2357 = LINE('',#2358,#2359);+#2358 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2359 = VECTOR('',#2360,1.);+#2360 = DIRECTION('',(0.,1.));+#2361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2362 = ORIENTED_EDGE('',*,*,#2363,.T.);+#2363 = EDGE_CURVE('',#2336,#2364,#2366,.T.);+#2364 = VERTEX_POINT('',#2365);+#2365 = CARTESIAN_POINT('',(3.15,2.125,1.175));+#2366 = SURFACE_CURVE('',#2367,(#2371,#2378),.PCURVE_S1.);+#2367 = LINE('',#2368,#2369);+#2368 = CARTESIAN_POINT('',(3.15,2.425,1.175));+#2369 = VECTOR('',#2370,1.);+#2370 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2371 = PCURVE('',#2041,#2372);+#2372 = DEFINITIONAL_REPRESENTATION('',(#2373),#2377);+#2373 = LINE('',#2374,#2375);+#2374 = CARTESIAN_POINT('',(3.15,1.65));+#2375 = VECTOR('',#2376,1.);+#2376 = DIRECTION('',(-1.18971702004E-17,1.));+#2377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2378 = PCURVE('',#2379,#2384);+#2379 = CYLINDRICAL_SURFACE('',#2380,0.25);+#2380 = AXIS2_PLACEMENT_3D('',#2381,#2382,#2383);+#2381 = CARTESIAN_POINT('',(3.15,2.425,0.925));+#2382 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2383 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2384 = DEFINITIONAL_REPRESENTATION('',(#2385),#2389);+#2385 = LINE('',#2386,#2387);+#2386 = CARTESIAN_POINT('',(4.886921905584,0.));+#2387 = VECTOR('',#2388,1.);+#2388 = DIRECTION('',(0.,-1.));+#2389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2390 = ORIENTED_EDGE('',*,*,#2391,.T.);+#2391 = EDGE_CURVE('',#2364,#2392,#2394,.T.);+#2392 = VERTEX_POINT('',#2393);+#2393 = CARTESIAN_POINT('',(2.65,2.125,1.175));+#2394 = SURFACE_CURVE('',#2395,(#2399,#2406),.PCURVE_S1.);+#2395 = LINE('',#2396,#2397);+#2396 = CARTESIAN_POINT('',(3.15,2.125,1.175));+#2397 = VECTOR('',#2398,1.);+#2398 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2399 = PCURVE('',#2041,#2400);+#2400 = DEFINITIONAL_REPRESENTATION('',(#2401),#2405);+#2401 = LINE('',#2402,#2403);+#2402 = CARTESIAN_POINT('',(3.15,1.95));+#2403 = VECTOR('',#2404,1.);+#2404 = DIRECTION('',(-1.,-1.18971702004E-17));+#2405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2406 = PCURVE('',#2407,#2412);+#2407 = PLANE('',#2408);+#2408 = AXIS2_PLACEMENT_3D('',#2409,#2410,#2411);+#2409 = CARTESIAN_POINT('',(3.278710000798,2.125,0.659796909381));+#2410 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2411 = DIRECTION('',(0.,0.,1.));+#2412 = DEFINITIONAL_REPRESENTATION('',(#2413),#2417);+#2413 = LINE('',#2414,#2415);+#2414 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2415 = VECTOR('',#2416,1.);+#2416 = DIRECTION('',(0.,1.));+#2417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2418 = ORIENTED_EDGE('',*,*,#2419,.T.);+#2419 = EDGE_CURVE('',#2392,#2420,#2422,.T.);+#2420 = VERTEX_POINT('',#2421);+#2421 = CARTESIAN_POINT('',(2.65,1.775,1.175));+#2422 = SURFACE_CURVE('',#2423,(#2427,#2434),.PCURVE_S1.);+#2423 = LINE('',#2424,#2425);+#2424 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2425 = VECTOR('',#2426,1.);+#2426 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2427 = PCURVE('',#2041,#2428);+#2428 = DEFINITIONAL_REPRESENTATION('',(#2429),#2433);+#2429 = LINE('',#2430,#2431);+#2430 = CARTESIAN_POINT('',(2.65,0.175));+#2431 = VECTOR('',#2432,1.);+#2432 = DIRECTION('',(-1.18971702004E-17,1.));+#2433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2434 = PCURVE('',#1770,#2435);+#2435 = DEFINITIONAL_REPRESENTATION('',(#2436),#2440);+#2436 = LINE('',#2437,#2438);+#2437 = CARTESIAN_POINT('',(0.,0.));+#2438 = VECTOR('',#2439,1.);+#2439 = DIRECTION('',(1.,0.));+#2440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2441 = ORIENTED_EDGE('',*,*,#2442,.F.);+#2442 = EDGE_CURVE('',#2443,#2420,#2445,.T.);+#2443 = VERTEX_POINT('',#2444);+#2444 = CARTESIAN_POINT('',(3.15,1.775,1.175));+#2445 = SURFACE_CURVE('',#2446,(#2450,#2457),.PCURVE_S1.);+#2446 = LINE('',#2447,#2448);+#2447 = CARTESIAN_POINT('',(3.15,1.775,1.175));+#2448 = VECTOR('',#2449,1.);+#2449 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2450 = PCURVE('',#2041,#2451);+#2451 = DEFINITIONAL_REPRESENTATION('',(#2452),#2456);+#2452 = LINE('',#2453,#2454);+#2453 = CARTESIAN_POINT('',(3.15,2.3));+#2454 = VECTOR('',#2455,1.);+#2455 = DIRECTION('',(-1.,-1.18971702004E-17));+#2456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2457 = PCURVE('',#2458,#2463);+#2458 = PLANE('',#2459);+#2459 = AXIS2_PLACEMENT_3D('',#2460,#2461,#2462);+#2460 = CARTESIAN_POINT('',(3.278710000798,1.775,0.659796909381));+#2461 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2462 = DIRECTION('',(0.,0.,1.));+#2463 = DEFINITIONAL_REPRESENTATION('',(#2464),#2468);+#2464 = LINE('',#2465,#2466);+#2465 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2466 = VECTOR('',#2467,1.);+#2467 = DIRECTION('',(0.,1.));+#2468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2469 = ORIENTED_EDGE('',*,*,#2470,.T.);+#2470 = EDGE_CURVE('',#2443,#2471,#2473,.T.);+#2471 = VERTEX_POINT('',#2472);+#2472 = CARTESIAN_POINT('',(3.15,1.475,1.175));+#2473 = SURFACE_CURVE('',#2474,(#2478,#2485),.PCURVE_S1.);+#2474 = LINE('',#2475,#2476);+#2475 = CARTESIAN_POINT('',(3.15,1.775,1.175));+#2476 = VECTOR('',#2477,1.);+#2477 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2478 = PCURVE('',#2041,#2479);+#2479 = DEFINITIONAL_REPRESENTATION('',(#2480),#2484);+#2480 = LINE('',#2481,#2482);+#2481 = CARTESIAN_POINT('',(3.15,2.3));+#2482 = VECTOR('',#2483,1.);+#2483 = DIRECTION('',(-1.18971702004E-17,1.));+#2484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2485 = PCURVE('',#2486,#2491);+#2486 = CYLINDRICAL_SURFACE('',#2487,0.25);+#2487 = AXIS2_PLACEMENT_3D('',#2488,#2489,#2490);+#2488 = CARTESIAN_POINT('',(3.15,1.775,0.925));+#2489 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2490 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2491 = DEFINITIONAL_REPRESENTATION('',(#2492),#2496);+#2492 = LINE('',#2493,#2494);+#2493 = CARTESIAN_POINT('',(4.886921905584,0.));+#2494 = VECTOR('',#2495,1.);+#2495 = DIRECTION('',(0.,-1.));+#2496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2497 = ORIENTED_EDGE('',*,*,#2498,.T.);+#2498 = EDGE_CURVE('',#2471,#2499,#2501,.T.);+#2499 = VERTEX_POINT('',#2500);+#2500 = CARTESIAN_POINT('',(2.65,1.475,1.175));+#2501 = SURFACE_CURVE('',#2502,(#2506,#2513),.PCURVE_S1.);+#2502 = LINE('',#2503,#2504);+#2503 = CARTESIAN_POINT('',(3.15,1.475,1.175));+#2504 = VECTOR('',#2505,1.);+#2505 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2506 = PCURVE('',#2041,#2507);+#2507 = DEFINITIONAL_REPRESENTATION('',(#2508),#2512);+#2508 = LINE('',#2509,#2510);+#2509 = CARTESIAN_POINT('',(3.15,2.6));+#2510 = VECTOR('',#2511,1.);+#2511 = DIRECTION('',(-1.,-1.18971702004E-17));+#2512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2513 = PCURVE('',#2514,#2519);+#2514 = PLANE('',#2515);+#2515 = AXIS2_PLACEMENT_3D('',#2516,#2517,#2518);+#2516 = CARTESIAN_POINT('',(3.278710000798,1.475,0.659796909381));+#2517 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2518 = DIRECTION('',(0.,0.,1.));+#2519 = DEFINITIONAL_REPRESENTATION('',(#2520),#2524);+#2520 = LINE('',#2521,#2522);+#2521 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2522 = VECTOR('',#2523,1.);+#2523 = DIRECTION('',(0.,1.));+#2524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2525 = ORIENTED_EDGE('',*,*,#2526,.T.);+#2526 = EDGE_CURVE('',#2499,#2527,#2529,.T.);+#2527 = VERTEX_POINT('',#2528);+#2528 = CARTESIAN_POINT('',(2.65,1.125,1.175));+#2529 = SURFACE_CURVE('',#2530,(#2534,#2541),.PCURVE_S1.);+#2530 = LINE('',#2531,#2532);+#2531 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2532 = VECTOR('',#2533,1.);+#2533 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2534 = PCURVE('',#2041,#2535);+#2535 = DEFINITIONAL_REPRESENTATION('',(#2536),#2540);+#2536 = LINE('',#2537,#2538);+#2537 = CARTESIAN_POINT('',(2.65,0.175));+#2538 = VECTOR('',#2539,1.);+#2539 = DIRECTION('',(-1.18971702004E-17,1.));+#2540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2541 = PCURVE('',#1714,#2542);+#2542 = DEFINITIONAL_REPRESENTATION('',(#2543),#2547);+#2543 = LINE('',#2544,#2545);+#2544 = CARTESIAN_POINT('',(0.,0.));+#2545 = VECTOR('',#2546,1.);+#2546 = DIRECTION('',(1.,0.));+#2547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2548 = ORIENTED_EDGE('',*,*,#2549,.F.);+#2549 = EDGE_CURVE('',#2550,#2527,#2552,.T.);+#2550 = VERTEX_POINT('',#2551);+#2551 = CARTESIAN_POINT('',(3.15,1.125,1.175));+#2552 = SURFACE_CURVE('',#2553,(#2557,#2564),.PCURVE_S1.);+#2553 = LINE('',#2554,#2555);+#2554 = CARTESIAN_POINT('',(3.15,1.125,1.175));+#2555 = VECTOR('',#2556,1.);+#2556 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2557 = PCURVE('',#2041,#2558);+#2558 = DEFINITIONAL_REPRESENTATION('',(#2559),#2563);+#2559 = LINE('',#2560,#2561);+#2560 = CARTESIAN_POINT('',(3.15,2.95));+#2561 = VECTOR('',#2562,1.);+#2562 = DIRECTION('',(-1.,-1.18971702004E-17));+#2563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2564 = PCURVE('',#2565,#2570);+#2565 = PLANE('',#2566);+#2566 = AXIS2_PLACEMENT_3D('',#2567,#2568,#2569);+#2567 = CARTESIAN_POINT('',(3.278710000798,1.125,0.659796909381));+#2568 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2569 = DIRECTION('',(0.,0.,1.));+#2570 = DEFINITIONAL_REPRESENTATION('',(#2571),#2575);+#2571 = LINE('',#2572,#2573);+#2572 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2573 = VECTOR('',#2574,1.);+#2574 = DIRECTION('',(0.,1.));+#2575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2576 = ORIENTED_EDGE('',*,*,#2577,.T.);+#2577 = EDGE_CURVE('',#2550,#2578,#2580,.T.);+#2578 = VERTEX_POINT('',#2579);+#2579 = CARTESIAN_POINT('',(3.15,0.825,1.175));+#2580 = SURFACE_CURVE('',#2581,(#2585,#2592),.PCURVE_S1.);+#2581 = LINE('',#2582,#2583);+#2582 = CARTESIAN_POINT('',(3.15,1.125,1.175));+#2583 = VECTOR('',#2584,1.);+#2584 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2585 = PCURVE('',#2041,#2586);+#2586 = DEFINITIONAL_REPRESENTATION('',(#2587),#2591);+#2587 = LINE('',#2588,#2589);+#2588 = CARTESIAN_POINT('',(3.15,2.95));+#2589 = VECTOR('',#2590,1.);+#2590 = DIRECTION('',(-1.18971702004E-17,1.));+#2591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2592 = PCURVE('',#2593,#2598);+#2593 = CYLINDRICAL_SURFACE('',#2594,0.25);+#2594 = AXIS2_PLACEMENT_3D('',#2595,#2596,#2597);+#2595 = CARTESIAN_POINT('',(3.15,1.125,0.925));+#2596 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2597 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2598 = DEFINITIONAL_REPRESENTATION('',(#2599),#2603);+#2599 = LINE('',#2600,#2601);+#2600 = CARTESIAN_POINT('',(4.886921905584,0.));+#2601 = VECTOR('',#2602,1.);+#2602 = DIRECTION('',(0.,-1.));+#2603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2604 = ORIENTED_EDGE('',*,*,#2605,.T.);+#2605 = EDGE_CURVE('',#2578,#2606,#2608,.T.);+#2606 = VERTEX_POINT('',#2607);+#2607 = CARTESIAN_POINT('',(2.65,0.825,1.175));+#2608 = SURFACE_CURVE('',#2609,(#2613,#2620),.PCURVE_S1.);+#2609 = LINE('',#2610,#2611);+#2610 = CARTESIAN_POINT('',(3.15,0.825,1.175));+#2611 = VECTOR('',#2612,1.);+#2612 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2613 = PCURVE('',#2041,#2614);+#2614 = DEFINITIONAL_REPRESENTATION('',(#2615),#2619);+#2615 = LINE('',#2616,#2617);+#2616 = CARTESIAN_POINT('',(3.15,3.25));+#2617 = VECTOR('',#2618,1.);+#2618 = DIRECTION('',(-1.,-1.18971702004E-17));+#2619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2620 = PCURVE('',#2621,#2626);+#2621 = PLANE('',#2622);+#2622 = AXIS2_PLACEMENT_3D('',#2623,#2624,#2625);+#2623 = CARTESIAN_POINT('',(3.278710000798,0.825,0.659796909381));+#2624 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2625 = DIRECTION('',(0.,0.,1.));+#2626 = DEFINITIONAL_REPRESENTATION('',(#2627),#2631);+#2627 = LINE('',#2628,#2629);+#2628 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2629 = VECTOR('',#2630,1.);+#2630 = DIRECTION('',(0.,1.));+#2631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2632 = ORIENTED_EDGE('',*,*,#2633,.T.);+#2633 = EDGE_CURVE('',#2606,#2634,#2636,.T.);+#2634 = VERTEX_POINT('',#2635);+#2635 = CARTESIAN_POINT('',(2.65,0.475,1.175));+#2636 = SURFACE_CURVE('',#2637,(#2641,#2648),.PCURVE_S1.);+#2637 = LINE('',#2638,#2639);+#2638 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2639 = VECTOR('',#2640,1.);+#2640 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2641 = PCURVE('',#2041,#2642);+#2642 = DEFINITIONAL_REPRESENTATION('',(#2643),#2647);+#2643 = LINE('',#2644,#2645);+#2644 = CARTESIAN_POINT('',(2.65,0.175));+#2645 = VECTOR('',#2646,1.);+#2646 = DIRECTION('',(-1.18971702004E-17,1.));+#2647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2648 = PCURVE('',#1658,#2649);+#2649 = DEFINITIONAL_REPRESENTATION('',(#2650),#2654);+#2650 = LINE('',#2651,#2652);+#2651 = CARTESIAN_POINT('',(0.,0.));+#2652 = VECTOR('',#2653,1.);+#2653 = DIRECTION('',(1.,0.));+#2654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2655 = ORIENTED_EDGE('',*,*,#2656,.F.);+#2656 = EDGE_CURVE('',#2657,#2634,#2659,.T.);+#2657 = VERTEX_POINT('',#2658);+#2658 = CARTESIAN_POINT('',(3.15,0.475,1.175));+#2659 = SURFACE_CURVE('',#2660,(#2664,#2671),.PCURVE_S1.);+#2660 = LINE('',#2661,#2662);+#2661 = CARTESIAN_POINT('',(3.15,0.475,1.175));+#2662 = VECTOR('',#2663,1.);+#2663 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2664 = PCURVE('',#2041,#2665);+#2665 = DEFINITIONAL_REPRESENTATION('',(#2666),#2670);+#2666 = LINE('',#2667,#2668);+#2667 = CARTESIAN_POINT('',(3.15,3.6));+#2668 = VECTOR('',#2669,1.);+#2669 = DIRECTION('',(-1.,-1.18971702004E-17));+#2670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2671 = PCURVE('',#2672,#2677);+#2672 = PLANE('',#2673);+#2673 = AXIS2_PLACEMENT_3D('',#2674,#2675,#2676);+#2674 = CARTESIAN_POINT('',(3.278710000798,0.475,0.659796909381));+#2675 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2676 = DIRECTION('',(0.,0.,1.));+#2677 = DEFINITIONAL_REPRESENTATION('',(#2678),#2682);+#2678 = LINE('',#2679,#2680);+#2679 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2680 = VECTOR('',#2681,1.);+#2681 = DIRECTION('',(0.,1.));+#2682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2683 = ORIENTED_EDGE('',*,*,#2684,.T.);+#2684 = EDGE_CURVE('',#2657,#2685,#2687,.T.);+#2685 = VERTEX_POINT('',#2686);+#2686 = CARTESIAN_POINT('',(3.15,0.175,1.175));+#2687 = SURFACE_CURVE('',#2688,(#2692,#2699),.PCURVE_S1.);+#2688 = LINE('',#2689,#2690);+#2689 = CARTESIAN_POINT('',(3.15,0.475,1.175));+#2690 = VECTOR('',#2691,1.);+#2691 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2692 = PCURVE('',#2041,#2693);+#2693 = DEFINITIONAL_REPRESENTATION('',(#2694),#2698);+#2694 = LINE('',#2695,#2696);+#2695 = CARTESIAN_POINT('',(3.15,3.6));+#2696 = VECTOR('',#2697,1.);+#2697 = DIRECTION('',(-1.18971702004E-17,1.));+#2698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2699 = PCURVE('',#2700,#2705);+#2700 = CYLINDRICAL_SURFACE('',#2701,0.25);+#2701 = AXIS2_PLACEMENT_3D('',#2702,#2703,#2704);+#2702 = CARTESIAN_POINT('',(3.15,0.475,0.925));+#2703 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2704 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2705 = DEFINITIONAL_REPRESENTATION('',(#2706),#2710);+#2706 = LINE('',#2707,#2708);+#2707 = CARTESIAN_POINT('',(4.886921905584,0.));+#2708 = VECTOR('',#2709,1.);+#2709 = DIRECTION('',(0.,-1.));+#2710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2711 = ORIENTED_EDGE('',*,*,#2712,.T.);+#2712 = EDGE_CURVE('',#2685,#2713,#2715,.T.);+#2713 = VERTEX_POINT('',#2714);+#2714 = CARTESIAN_POINT('',(2.65,0.175,1.175));+#2715 = SURFACE_CURVE('',#2716,(#2720,#2727),.PCURVE_S1.);+#2716 = LINE('',#2717,#2718);+#2717 = CARTESIAN_POINT('',(3.15,0.175,1.175));+#2718 = VECTOR('',#2719,1.);+#2719 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2720 = PCURVE('',#2041,#2721);+#2721 = DEFINITIONAL_REPRESENTATION('',(#2722),#2726);+#2722 = LINE('',#2723,#2724);+#2723 = CARTESIAN_POINT('',(3.15,3.9));+#2724 = VECTOR('',#2725,1.);+#2725 = DIRECTION('',(-1.,-1.18971702004E-17));+#2726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2727 = PCURVE('',#2728,#2733);+#2728 = PLANE('',#2729);+#2729 = AXIS2_PLACEMENT_3D('',#2730,#2731,#2732);+#2730 = CARTESIAN_POINT('',(3.278710000798,0.175,0.659796909381));+#2731 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2732 = DIRECTION('',(0.,0.,1.));+#2733 = DEFINITIONAL_REPRESENTATION('',(#2734),#2738);+#2734 = LINE('',#2735,#2736);+#2735 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2736 = VECTOR('',#2737,1.);+#2737 = DIRECTION('',(0.,1.));+#2738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2739 = ORIENTED_EDGE('',*,*,#2740,.T.);+#2740 = EDGE_CURVE('',#2713,#2741,#2743,.T.);+#2741 = VERTEX_POINT('',#2742);+#2742 = CARTESIAN_POINT('',(2.65,-0.175,1.175));+#2743 = SURFACE_CURVE('',#2744,(#2748,#2755),.PCURVE_S1.);+#2744 = LINE('',#2745,#2746);+#2745 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2746 = VECTOR('',#2747,1.);+#2747 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2748 = PCURVE('',#2041,#2749);+#2749 = DEFINITIONAL_REPRESENTATION('',(#2750),#2754);+#2750 = LINE('',#2751,#2752);+#2751 = CARTESIAN_POINT('',(2.65,0.175));+#2752 = VECTOR('',#2753,1.);+#2753 = DIRECTION('',(-1.18971702004E-17,1.));+#2754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2755 = PCURVE('',#1602,#2756);+#2756 = DEFINITIONAL_REPRESENTATION('',(#2757),#2761);+#2757 = LINE('',#2758,#2759);+#2758 = CARTESIAN_POINT('',(0.,0.));+#2759 = VECTOR('',#2760,1.);+#2760 = DIRECTION('',(1.,0.));+#2761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2762 = ORIENTED_EDGE('',*,*,#2763,.F.);+#2763 = EDGE_CURVE('',#2764,#2741,#2766,.T.);+#2764 = VERTEX_POINT('',#2765);+#2765 = CARTESIAN_POINT('',(3.15,-0.175,1.175));+#2766 = SURFACE_CURVE('',#2767,(#2771,#2778),.PCURVE_S1.);+#2767 = LINE('',#2768,#2769);+#2768 = CARTESIAN_POINT('',(3.15,-0.175,1.175));+#2769 = VECTOR('',#2770,1.);+#2770 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2771 = PCURVE('',#2041,#2772);+#2772 = DEFINITIONAL_REPRESENTATION('',(#2773),#2777);+#2773 = LINE('',#2774,#2775);+#2774 = CARTESIAN_POINT('',(3.15,4.25));+#2775 = VECTOR('',#2776,1.);+#2776 = DIRECTION('',(-1.,-1.18971702004E-17));+#2777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2778 = PCURVE('',#2779,#2784);+#2779 = PLANE('',#2780);+#2780 = AXIS2_PLACEMENT_3D('',#2781,#2782,#2783);+#2781 = CARTESIAN_POINT('',(3.278710000798,-0.175,0.659796909381));+#2782 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2783 = DIRECTION('',(0.,0.,1.));+#2784 = DEFINITIONAL_REPRESENTATION('',(#2785),#2789);+#2785 = LINE('',#2786,#2787);+#2786 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2787 = VECTOR('',#2788,1.);+#2788 = DIRECTION('',(0.,1.));+#2789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2790 = ORIENTED_EDGE('',*,*,#2791,.T.);+#2791 = EDGE_CURVE('',#2764,#2792,#2794,.T.);+#2792 = VERTEX_POINT('',#2793);+#2793 = CARTESIAN_POINT('',(3.15,-0.475,1.175));+#2794 = SURFACE_CURVE('',#2795,(#2799,#2806),.PCURVE_S1.);+#2795 = LINE('',#2796,#2797);+#2796 = CARTESIAN_POINT('',(3.15,-0.175,1.175));+#2797 = VECTOR('',#2798,1.);+#2798 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2799 = PCURVE('',#2041,#2800);+#2800 = DEFINITIONAL_REPRESENTATION('',(#2801),#2805);+#2801 = LINE('',#2802,#2803);+#2802 = CARTESIAN_POINT('',(3.15,4.25));+#2803 = VECTOR('',#2804,1.);+#2804 = DIRECTION('',(-1.18971702004E-17,1.));+#2805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2806 = PCURVE('',#2807,#2812);+#2807 = CYLINDRICAL_SURFACE('',#2808,0.25);+#2808 = AXIS2_PLACEMENT_3D('',#2809,#2810,#2811);+#2809 = CARTESIAN_POINT('',(3.15,-0.175,0.925));+#2810 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2811 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2812 = DEFINITIONAL_REPRESENTATION('',(#2813),#2817);+#2813 = LINE('',#2814,#2815);+#2814 = CARTESIAN_POINT('',(4.886921905584,0.));+#2815 = VECTOR('',#2816,1.);+#2816 = DIRECTION('',(0.,-1.));+#2817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2818 = ORIENTED_EDGE('',*,*,#2819,.T.);+#2819 = EDGE_CURVE('',#2792,#2820,#2822,.T.);+#2820 = VERTEX_POINT('',#2821);+#2821 = CARTESIAN_POINT('',(2.65,-0.475,1.175));+#2822 = SURFACE_CURVE('',#2823,(#2827,#2834),.PCURVE_S1.);+#2823 = LINE('',#2824,#2825);+#2824 = CARTESIAN_POINT('',(3.15,-0.475,1.175));+#2825 = VECTOR('',#2826,1.);+#2826 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2827 = PCURVE('',#2041,#2828);+#2828 = DEFINITIONAL_REPRESENTATION('',(#2829),#2833);+#2829 = LINE('',#2830,#2831);+#2830 = CARTESIAN_POINT('',(3.15,4.55));+#2831 = VECTOR('',#2832,1.);+#2832 = DIRECTION('',(-1.,-1.18971702004E-17));+#2833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2834 = PCURVE('',#2835,#2840);+#2835 = PLANE('',#2836);+#2836 = AXIS2_PLACEMENT_3D('',#2837,#2838,#2839);+#2837 = CARTESIAN_POINT('',(3.278710000798,-0.475,0.659796909381));+#2838 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2839 = DIRECTION('',(0.,0.,1.));+#2840 = DEFINITIONAL_REPRESENTATION('',(#2841),#2845);+#2841 = LINE('',#2842,#2843);+#2842 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2843 = VECTOR('',#2844,1.);+#2844 = DIRECTION('',(0.,1.));+#2845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2846 = ORIENTED_EDGE('',*,*,#2847,.T.);+#2847 = EDGE_CURVE('',#2820,#2848,#2850,.T.);+#2848 = VERTEX_POINT('',#2849);+#2849 = CARTESIAN_POINT('',(2.65,-0.825,1.175));+#2850 = SURFACE_CURVE('',#2851,(#2855,#2862),.PCURVE_S1.);+#2851 = LINE('',#2852,#2853);+#2852 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2853 = VECTOR('',#2854,1.);+#2854 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2855 = PCURVE('',#2041,#2856);+#2856 = DEFINITIONAL_REPRESENTATION('',(#2857),#2861);+#2857 = LINE('',#2858,#2859);+#2858 = CARTESIAN_POINT('',(2.65,0.175));+#2859 = VECTOR('',#2860,1.);+#2860 = DIRECTION('',(-1.18971702004E-17,1.));+#2861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2862 = PCURVE('',#1546,#2863);+#2863 = DEFINITIONAL_REPRESENTATION('',(#2864),#2868);+#2864 = LINE('',#2865,#2866);+#2865 = CARTESIAN_POINT('',(0.,0.));+#2866 = VECTOR('',#2867,1.);+#2867 = DIRECTION('',(1.,0.));+#2868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2869 = ORIENTED_EDGE('',*,*,#2870,.F.);+#2870 = EDGE_CURVE('',#2871,#2848,#2873,.T.);+#2871 = VERTEX_POINT('',#2872);+#2872 = CARTESIAN_POINT('',(3.15,-0.825,1.175));+#2873 = SURFACE_CURVE('',#2874,(#2878,#2885),.PCURVE_S1.);+#2874 = LINE('',#2875,#2876);+#2875 = CARTESIAN_POINT('',(3.15,-0.825,1.175));+#2876 = VECTOR('',#2877,1.);+#2877 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2878 = PCURVE('',#2041,#2879);+#2879 = DEFINITIONAL_REPRESENTATION('',(#2880),#2884);+#2880 = LINE('',#2881,#2882);+#2881 = CARTESIAN_POINT('',(3.15,4.9));+#2882 = VECTOR('',#2883,1.);+#2883 = DIRECTION('',(-1.,-1.18971702004E-17));+#2884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2885 = PCURVE('',#2886,#2891);+#2886 = PLANE('',#2887);+#2887 = AXIS2_PLACEMENT_3D('',#2888,#2889,#2890);+#2888 = CARTESIAN_POINT('',(3.278710000798,-0.825,0.659796909381));+#2889 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2890 = DIRECTION('',(0.,0.,1.));+#2891 = DEFINITIONAL_REPRESENTATION('',(#2892),#2896);+#2892 = LINE('',#2893,#2894);+#2893 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2894 = VECTOR('',#2895,1.);+#2895 = DIRECTION('',(0.,1.));+#2896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2897 = ORIENTED_EDGE('',*,*,#2898,.T.);+#2898 = EDGE_CURVE('',#2871,#2899,#2901,.T.);+#2899 = VERTEX_POINT('',#2900);+#2900 = CARTESIAN_POINT('',(3.15,-1.125,1.175));+#2901 = SURFACE_CURVE('',#2902,(#2906,#2913),.PCURVE_S1.);+#2902 = LINE('',#2903,#2904);+#2903 = CARTESIAN_POINT('',(3.15,-0.825,1.175));+#2904 = VECTOR('',#2905,1.);+#2905 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2906 = PCURVE('',#2041,#2907);+#2907 = DEFINITIONAL_REPRESENTATION('',(#2908),#2912);+#2908 = LINE('',#2909,#2910);+#2909 = CARTESIAN_POINT('',(3.15,4.9));+#2910 = VECTOR('',#2911,1.);+#2911 = DIRECTION('',(-1.18971702004E-17,1.));+#2912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2913 = PCURVE('',#2914,#2919);+#2914 = CYLINDRICAL_SURFACE('',#2915,0.25);+#2915 = AXIS2_PLACEMENT_3D('',#2916,#2917,#2918);+#2916 = CARTESIAN_POINT('',(3.15,-0.825,0.925));+#2917 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2918 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2919 = DEFINITIONAL_REPRESENTATION('',(#2920),#2924);+#2920 = LINE('',#2921,#2922);+#2921 = CARTESIAN_POINT('',(4.886921905584,0.));+#2922 = VECTOR('',#2923,1.);+#2923 = DIRECTION('',(0.,-1.));+#2924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2925 = ORIENTED_EDGE('',*,*,#2926,.T.);+#2926 = EDGE_CURVE('',#2899,#2927,#2929,.T.);+#2927 = VERTEX_POINT('',#2928);+#2928 = CARTESIAN_POINT('',(2.65,-1.125,1.175));+#2929 = SURFACE_CURVE('',#2930,(#2934,#2941),.PCURVE_S1.);+#2930 = LINE('',#2931,#2932);+#2931 = CARTESIAN_POINT('',(3.15,-1.125,1.175));+#2932 = VECTOR('',#2933,1.);+#2933 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2934 = PCURVE('',#2041,#2935);+#2935 = DEFINITIONAL_REPRESENTATION('',(#2936),#2940);+#2936 = LINE('',#2937,#2938);+#2937 = CARTESIAN_POINT('',(3.15,5.2));+#2938 = VECTOR('',#2939,1.);+#2939 = DIRECTION('',(-1.,-1.18971702004E-17));+#2940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2941 = PCURVE('',#2942,#2947);+#2942 = PLANE('',#2943);+#2943 = AXIS2_PLACEMENT_3D('',#2944,#2945,#2946);+#2944 = CARTESIAN_POINT('',(3.278710000798,-1.125,0.659796909381));+#2945 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2946 = DIRECTION('',(0.,0.,1.));+#2947 = DEFINITIONAL_REPRESENTATION('',(#2948),#2952);+#2948 = LINE('',#2949,#2950);+#2949 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#2950 = VECTOR('',#2951,1.);+#2951 = DIRECTION('',(0.,1.));+#2952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2953 = ORIENTED_EDGE('',*,*,#2954,.T.);+#2954 = EDGE_CURVE('',#2927,#2955,#2957,.T.);+#2955 = VERTEX_POINT('',#2956);+#2956 = CARTESIAN_POINT('',(2.65,-1.475,1.175));+#2957 = SURFACE_CURVE('',#2958,(#2962,#2969),.PCURVE_S1.);+#2958 = LINE('',#2959,#2960);+#2959 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#2960 = VECTOR('',#2961,1.);+#2961 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2962 = PCURVE('',#2041,#2963);+#2963 = DEFINITIONAL_REPRESENTATION('',(#2964),#2968);+#2964 = LINE('',#2965,#2966);+#2965 = CARTESIAN_POINT('',(2.65,0.175));+#2966 = VECTOR('',#2967,1.);+#2967 = DIRECTION('',(-1.18971702004E-17,1.));+#2968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2969 = PCURVE('',#1490,#2970);+#2970 = DEFINITIONAL_REPRESENTATION('',(#2971),#2975);+#2971 = LINE('',#2972,#2973);+#2972 = CARTESIAN_POINT('',(0.,0.));+#2973 = VECTOR('',#2974,1.);+#2974 = DIRECTION('',(1.,0.));+#2975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2976 = ORIENTED_EDGE('',*,*,#2977,.F.);+#2977 = EDGE_CURVE('',#2978,#2955,#2980,.T.);+#2978 = VERTEX_POINT('',#2979);+#2979 = CARTESIAN_POINT('',(3.15,-1.475,1.175));+#2980 = SURFACE_CURVE('',#2981,(#2985,#2992),.PCURVE_S1.);+#2981 = LINE('',#2982,#2983);+#2982 = CARTESIAN_POINT('',(3.15,-1.475,1.175));+#2983 = VECTOR('',#2984,1.);+#2984 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2985 = PCURVE('',#2041,#2986);+#2986 = DEFINITIONAL_REPRESENTATION('',(#2987),#2991);+#2987 = LINE('',#2988,#2989);+#2988 = CARTESIAN_POINT('',(3.15,5.55));+#2989 = VECTOR('',#2990,1.);+#2990 = DIRECTION('',(-1.,-1.18971702004E-17));+#2991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2992 = PCURVE('',#2993,#2998);+#2993 = PLANE('',#2994);+#2994 = AXIS2_PLACEMENT_3D('',#2995,#2996,#2997);+#2995 = CARTESIAN_POINT('',(3.278710000798,-1.475,0.659796909381));+#2996 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2997 = DIRECTION('',(0.,0.,1.));+#2998 = DEFINITIONAL_REPRESENTATION('',(#2999),#3003);+#2999 = LINE('',#3000,#3001);+#3000 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3001 = VECTOR('',#3002,1.);+#3002 = DIRECTION('',(0.,1.));+#3003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3004 = ORIENTED_EDGE('',*,*,#3005,.T.);+#3005 = EDGE_CURVE('',#2978,#3006,#3008,.T.);+#3006 = VERTEX_POINT('',#3007);+#3007 = CARTESIAN_POINT('',(3.15,-1.775,1.175));+#3008 = SURFACE_CURVE('',#3009,(#3013,#3020),.PCURVE_S1.);+#3009 = LINE('',#3010,#3011);+#3010 = CARTESIAN_POINT('',(3.15,-1.475,1.175));+#3011 = VECTOR('',#3012,1.);+#3012 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3013 = PCURVE('',#2041,#3014);+#3014 = DEFINITIONAL_REPRESENTATION('',(#3015),#3019);+#3015 = LINE('',#3016,#3017);+#3016 = CARTESIAN_POINT('',(3.15,5.55));+#3017 = VECTOR('',#3018,1.);+#3018 = DIRECTION('',(-1.18971702004E-17,1.));+#3019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3020 = PCURVE('',#3021,#3026);+#3021 = CYLINDRICAL_SURFACE('',#3022,0.25);+#3022 = AXIS2_PLACEMENT_3D('',#3023,#3024,#3025);+#3023 = CARTESIAN_POINT('',(3.15,-1.475,0.925));+#3024 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3025 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#3026 = DEFINITIONAL_REPRESENTATION('',(#3027),#3031);+#3027 = LINE('',#3028,#3029);+#3028 = CARTESIAN_POINT('',(4.886921905584,0.));+#3029 = VECTOR('',#3030,1.);+#3030 = DIRECTION('',(0.,-1.));+#3031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3032 = ORIENTED_EDGE('',*,*,#3033,.T.);+#3033 = EDGE_CURVE('',#3006,#3034,#3036,.T.);+#3034 = VERTEX_POINT('',#3035);+#3035 = CARTESIAN_POINT('',(2.65,-1.775,1.175));+#3036 = SURFACE_CURVE('',#3037,(#3041,#3048),.PCURVE_S1.);+#3037 = LINE('',#3038,#3039);+#3038 = CARTESIAN_POINT('',(3.15,-1.775,1.175));+#3039 = VECTOR('',#3040,1.);+#3040 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3041 = PCURVE('',#2041,#3042);+#3042 = DEFINITIONAL_REPRESENTATION('',(#3043),#3047);+#3043 = LINE('',#3044,#3045);+#3044 = CARTESIAN_POINT('',(3.15,5.85));+#3045 = VECTOR('',#3046,1.);+#3046 = DIRECTION('',(-1.,-1.18971702004E-17));+#3047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3048 = PCURVE('',#3049,#3054);+#3049 = PLANE('',#3050);+#3050 = AXIS2_PLACEMENT_3D('',#3051,#3052,#3053);+#3051 = CARTESIAN_POINT('',(3.278710000798,-1.775,0.659796909381));+#3052 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3053 = DIRECTION('',(0.,0.,1.));+#3054 = DEFINITIONAL_REPRESENTATION('',(#3055),#3059);+#3055 = LINE('',#3056,#3057);+#3056 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3057 = VECTOR('',#3058,1.);+#3058 = DIRECTION('',(0.,1.));+#3059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3060 = ORIENTED_EDGE('',*,*,#3061,.T.);+#3061 = EDGE_CURVE('',#3034,#3062,#3064,.T.);+#3062 = VERTEX_POINT('',#3063);+#3063 = CARTESIAN_POINT('',(2.65,-2.125,1.175));+#3064 = SURFACE_CURVE('',#3065,(#3069,#3076),.PCURVE_S1.);+#3065 = LINE('',#3066,#3067);+#3066 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#3067 = VECTOR('',#3068,1.);+#3068 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3069 = PCURVE('',#2041,#3070);+#3070 = DEFINITIONAL_REPRESENTATION('',(#3071),#3075);+#3071 = LINE('',#3072,#3073);+#3072 = CARTESIAN_POINT('',(2.65,0.175));+#3073 = VECTOR('',#3074,1.);+#3074 = DIRECTION('',(-1.18971702004E-17,1.));+#3075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3076 = PCURVE('',#1434,#3077);+#3077 = DEFINITIONAL_REPRESENTATION('',(#3078),#3082);+#3078 = LINE('',#3079,#3080);+#3079 = CARTESIAN_POINT('',(0.,0.));+#3080 = VECTOR('',#3081,1.);+#3081 = DIRECTION('',(1.,0.));+#3082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3083 = ORIENTED_EDGE('',*,*,#3084,.F.);+#3084 = EDGE_CURVE('',#3085,#3062,#3087,.T.);+#3085 = VERTEX_POINT('',#3086);+#3086 = CARTESIAN_POINT('',(3.15,-2.125,1.175));+#3087 = SURFACE_CURVE('',#3088,(#3092,#3099),.PCURVE_S1.);+#3088 = LINE('',#3089,#3090);+#3089 = CARTESIAN_POINT('',(3.15,-2.125,1.175));+#3090 = VECTOR('',#3091,1.);+#3091 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3092 = PCURVE('',#2041,#3093);+#3093 = DEFINITIONAL_REPRESENTATION('',(#3094),#3098);+#3094 = LINE('',#3095,#3096);+#3095 = CARTESIAN_POINT('',(3.15,6.2));+#3096 = VECTOR('',#3097,1.);+#3097 = DIRECTION('',(-1.,-1.18971702004E-17));+#3098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3099 = PCURVE('',#3100,#3105);+#3100 = PLANE('',#3101);+#3101 = AXIS2_PLACEMENT_3D('',#3102,#3103,#3104);+#3102 = CARTESIAN_POINT('',(3.278710000798,-2.125,0.659796909381));+#3103 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3104 = DIRECTION('',(0.,0.,1.));+#3105 = DEFINITIONAL_REPRESENTATION('',(#3106),#3110);+#3106 = LINE('',#3107,#3108);+#3107 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3108 = VECTOR('',#3109,1.);+#3109 = DIRECTION('',(0.,1.));+#3110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3111 = ORIENTED_EDGE('',*,*,#3112,.T.);+#3112 = EDGE_CURVE('',#3085,#3113,#3115,.T.);+#3113 = VERTEX_POINT('',#3114);+#3114 = CARTESIAN_POINT('',(3.15,-2.425,1.175));+#3115 = SURFACE_CURVE('',#3116,(#3120,#3127),.PCURVE_S1.);+#3116 = LINE('',#3117,#3118);+#3117 = CARTESIAN_POINT('',(3.15,-2.125,1.175));+#3118 = VECTOR('',#3119,1.);+#3119 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3120 = PCURVE('',#2041,#3121);+#3121 = DEFINITIONAL_REPRESENTATION('',(#3122),#3126);+#3122 = LINE('',#3123,#3124);+#3123 = CARTESIAN_POINT('',(3.15,6.2));+#3124 = VECTOR('',#3125,1.);+#3125 = DIRECTION('',(-1.18971702004E-17,1.));+#3126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3127 = PCURVE('',#3128,#3133);+#3128 = CYLINDRICAL_SURFACE('',#3129,0.25);+#3129 = AXIS2_PLACEMENT_3D('',#3130,#3131,#3132);+#3130 = CARTESIAN_POINT('',(3.15,-2.125,0.925));+#3131 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3132 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#3133 = DEFINITIONAL_REPRESENTATION('',(#3134),#3138);+#3134 = LINE('',#3135,#3136);+#3135 = CARTESIAN_POINT('',(4.886921905584,0.));+#3136 = VECTOR('',#3137,1.);+#3137 = DIRECTION('',(0.,-1.));+#3138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3139 = ORIENTED_EDGE('',*,*,#3140,.T.);+#3140 = EDGE_CURVE('',#3113,#3141,#3143,.T.);+#3141 = VERTEX_POINT('',#3142);+#3142 = CARTESIAN_POINT('',(2.65,-2.425,1.175));+#3143 = SURFACE_CURVE('',#3144,(#3148,#3155),.PCURVE_S1.);+#3144 = LINE('',#3145,#3146);+#3145 = CARTESIAN_POINT('',(3.15,-2.425,1.175));+#3146 = VECTOR('',#3147,1.);+#3147 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3148 = PCURVE('',#2041,#3149);+#3149 = DEFINITIONAL_REPRESENTATION('',(#3150),#3154);+#3150 = LINE('',#3151,#3152);+#3151 = CARTESIAN_POINT('',(3.15,6.5));+#3152 = VECTOR('',#3153,1.);+#3153 = DIRECTION('',(-1.,-1.18971702004E-17));+#3154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3155 = PCURVE('',#3156,#3161);+#3156 = PLANE('',#3157);+#3157 = AXIS2_PLACEMENT_3D('',#3158,#3159,#3160);+#3158 = CARTESIAN_POINT('',(3.278710000798,-2.425,0.659796909381));+#3159 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3160 = DIRECTION('',(0.,0.,1.));+#3161 = DEFINITIONAL_REPRESENTATION('',(#3162),#3166);+#3162 = LINE('',#3163,#3164);+#3163 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3164 = VECTOR('',#3165,1.);+#3165 = DIRECTION('',(0.,1.));+#3166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3167 = ORIENTED_EDGE('',*,*,#3168,.T.);+#3168 = EDGE_CURVE('',#3141,#3169,#3171,.T.);+#3169 = VERTEX_POINT('',#3170);+#3170 = CARTESIAN_POINT('',(2.65,-2.775,1.175));+#3171 = SURFACE_CURVE('',#3172,(#3176,#3183),.PCURVE_S1.);+#3172 = LINE('',#3173,#3174);+#3173 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#3174 = VECTOR('',#3175,1.);+#3175 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3176 = PCURVE('',#2041,#3177);+#3177 = DEFINITIONAL_REPRESENTATION('',(#3178),#3182);+#3178 = LINE('',#3179,#3180);+#3179 = CARTESIAN_POINT('',(2.65,0.175));+#3180 = VECTOR('',#3181,1.);+#3181 = DIRECTION('',(-1.18971702004E-17,1.));+#3182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3183 = PCURVE('',#1378,#3184);+#3184 = DEFINITIONAL_REPRESENTATION('',(#3185),#3189);+#3185 = LINE('',#3186,#3187);+#3186 = CARTESIAN_POINT('',(0.,0.));+#3187 = VECTOR('',#3188,1.);+#3188 = DIRECTION('',(1.,0.));+#3189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3190 = ORIENTED_EDGE('',*,*,#3191,.F.);+#3191 = EDGE_CURVE('',#3192,#3169,#3194,.T.);+#3192 = VERTEX_POINT('',#3193);+#3193 = CARTESIAN_POINT('',(3.15,-2.775,1.175));+#3194 = SURFACE_CURVE('',#3195,(#3199,#3206),.PCURVE_S1.);+#3195 = LINE('',#3196,#3197);+#3196 = CARTESIAN_POINT('',(3.15,-2.775,1.175));+#3197 = VECTOR('',#3198,1.);+#3198 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3199 = PCURVE('',#2041,#3200);+#3200 = DEFINITIONAL_REPRESENTATION('',(#3201),#3205);+#3201 = LINE('',#3202,#3203);+#3202 = CARTESIAN_POINT('',(3.15,6.85));+#3203 = VECTOR('',#3204,1.);+#3204 = DIRECTION('',(-1.,-1.18971702004E-17));+#3205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3206 = PCURVE('',#3207,#3212);+#3207 = PLANE('',#3208);+#3208 = AXIS2_PLACEMENT_3D('',#3209,#3210,#3211);+#3209 = CARTESIAN_POINT('',(3.278710000798,-2.775,0.659796909381));+#3210 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3211 = DIRECTION('',(0.,0.,1.));+#3212 = DEFINITIONAL_REPRESENTATION('',(#3213),#3217);+#3213 = LINE('',#3214,#3215);+#3214 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3215 = VECTOR('',#3216,1.);+#3216 = DIRECTION('',(0.,1.));+#3217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3218 = ORIENTED_EDGE('',*,*,#3219,.T.);+#3219 = EDGE_CURVE('',#3192,#3220,#3222,.T.);+#3220 = VERTEX_POINT('',#3221);+#3221 = CARTESIAN_POINT('',(3.15,-3.075,1.175));+#3222 = SURFACE_CURVE('',#3223,(#3227,#3234),.PCURVE_S1.);+#3223 = LINE('',#3224,#3225);+#3224 = CARTESIAN_POINT('',(3.15,-2.775,1.175));+#3225 = VECTOR('',#3226,1.);+#3226 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3227 = PCURVE('',#2041,#3228);+#3228 = DEFINITIONAL_REPRESENTATION('',(#3229),#3233);+#3229 = LINE('',#3230,#3231);+#3230 = CARTESIAN_POINT('',(3.15,6.85));+#3231 = VECTOR('',#3232,1.);+#3232 = DIRECTION('',(-1.18971702004E-17,1.));+#3233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3234 = PCURVE('',#3235,#3240);+#3235 = CYLINDRICAL_SURFACE('',#3236,0.25);+#3236 = AXIS2_PLACEMENT_3D('',#3237,#3238,#3239);+#3237 = CARTESIAN_POINT('',(3.15,-2.775,0.925));+#3238 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3239 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#3240 = DEFINITIONAL_REPRESENTATION('',(#3241),#3245);+#3241 = LINE('',#3242,#3243);+#3242 = CARTESIAN_POINT('',(4.886921905584,0.));+#3243 = VECTOR('',#3244,1.);+#3244 = DIRECTION('',(0.,-1.));+#3245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3246 = ORIENTED_EDGE('',*,*,#3247,.T.);+#3247 = EDGE_CURVE('',#3220,#3248,#3250,.T.);+#3248 = VERTEX_POINT('',#3249);+#3249 = CARTESIAN_POINT('',(2.65,-3.075,1.175));+#3250 = SURFACE_CURVE('',#3251,(#3255,#3262),.PCURVE_S1.);+#3251 = LINE('',#3252,#3253);+#3252 = CARTESIAN_POINT('',(3.15,-3.075,1.175));+#3253 = VECTOR('',#3254,1.);+#3254 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3255 = PCURVE('',#2041,#3256);+#3256 = DEFINITIONAL_REPRESENTATION('',(#3257),#3261);+#3257 = LINE('',#3258,#3259);+#3258 = CARTESIAN_POINT('',(3.15,7.15));+#3259 = VECTOR('',#3260,1.);+#3260 = DIRECTION('',(-1.,-1.18971702004E-17));+#3261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3262 = PCURVE('',#3263,#3268);+#3263 = PLANE('',#3264);+#3264 = AXIS2_PLACEMENT_3D('',#3265,#3266,#3267);+#3265 = CARTESIAN_POINT('',(3.278710000798,-3.075,0.659796909381));+#3266 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3267 = DIRECTION('',(0.,0.,1.));+#3268 = DEFINITIONAL_REPRESENTATION('',(#3269),#3273);+#3269 = LINE('',#3270,#3271);+#3270 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3271 = VECTOR('',#3272,1.);+#3272 = DIRECTION('',(0.,1.));+#3273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3274 = ORIENTED_EDGE('',*,*,#3275,.T.);+#3275 = EDGE_CURVE('',#3248,#3276,#3278,.T.);+#3276 = VERTEX_POINT('',#3277);+#3277 = CARTESIAN_POINT('',(2.65,-3.425,1.175));+#3278 = SURFACE_CURVE('',#3279,(#3283,#3290),.PCURVE_S1.);+#3279 = LINE('',#3280,#3281);+#3280 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#3281 = VECTOR('',#3282,1.);+#3282 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3283 = PCURVE('',#2041,#3284);+#3284 = DEFINITIONAL_REPRESENTATION('',(#3285),#3289);+#3285 = LINE('',#3286,#3287);+#3286 = CARTESIAN_POINT('',(2.65,0.175));+#3287 = VECTOR('',#3288,1.);+#3288 = DIRECTION('',(-1.18971702004E-17,1.));+#3289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3290 = PCURVE('',#1322,#3291);+#3291 = DEFINITIONAL_REPRESENTATION('',(#3292),#3296);+#3292 = LINE('',#3293,#3294);+#3293 = CARTESIAN_POINT('',(0.,0.));+#3294 = VECTOR('',#3295,1.);+#3295 = DIRECTION('',(1.,0.));+#3296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3297 = ORIENTED_EDGE('',*,*,#3298,.F.);+#3298 = EDGE_CURVE('',#3299,#3276,#3301,.T.);+#3299 = VERTEX_POINT('',#3300);+#3300 = CARTESIAN_POINT('',(3.15,-3.425,1.175));+#3301 = SURFACE_CURVE('',#3302,(#3306,#3313),.PCURVE_S1.);+#3302 = LINE('',#3303,#3304);+#3303 = CARTESIAN_POINT('',(3.15,-3.425,1.175));+#3304 = VECTOR('',#3305,1.);+#3305 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3306 = PCURVE('',#2041,#3307);+#3307 = DEFINITIONAL_REPRESENTATION('',(#3308),#3312);+#3308 = LINE('',#3309,#3310);+#3309 = CARTESIAN_POINT('',(3.15,7.5));+#3310 = VECTOR('',#3311,1.);+#3311 = DIRECTION('',(-1.,-1.18971702004E-17));+#3312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3313 = PCURVE('',#3314,#3319);+#3314 = PLANE('',#3315);+#3315 = AXIS2_PLACEMENT_3D('',#3316,#3317,#3318);+#3316 = CARTESIAN_POINT('',(3.278710000798,-3.425,0.659796909381));+#3317 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3318 = DIRECTION('',(0.,0.,1.));+#3319 = DEFINITIONAL_REPRESENTATION('',(#3320),#3324);+#3320 = LINE('',#3321,#3322);+#3321 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3322 = VECTOR('',#3323,1.);+#3323 = DIRECTION('',(0.,1.));+#3324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3325 = ORIENTED_EDGE('',*,*,#3326,.T.);+#3326 = EDGE_CURVE('',#3299,#3327,#3329,.T.);+#3327 = VERTEX_POINT('',#3328);+#3328 = CARTESIAN_POINT('',(3.15,-3.725,1.175));+#3329 = SURFACE_CURVE('',#3330,(#3334,#3341),.PCURVE_S1.);+#3330 = LINE('',#3331,#3332);+#3331 = CARTESIAN_POINT('',(3.15,-3.425,1.175));+#3332 = VECTOR('',#3333,1.);+#3333 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3334 = PCURVE('',#2041,#3335);+#3335 = DEFINITIONAL_REPRESENTATION('',(#3336),#3340);+#3336 = LINE('',#3337,#3338);+#3337 = CARTESIAN_POINT('',(3.15,7.5));+#3338 = VECTOR('',#3339,1.);+#3339 = DIRECTION('',(-1.18971702004E-17,1.));+#3340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3341 = PCURVE('',#3342,#3347);+#3342 = CYLINDRICAL_SURFACE('',#3343,0.25);+#3343 = AXIS2_PLACEMENT_3D('',#3344,#3345,#3346);+#3344 = CARTESIAN_POINT('',(3.15,-3.425,0.925));+#3345 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3346 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#3347 = DEFINITIONAL_REPRESENTATION('',(#3348),#3352);+#3348 = LINE('',#3349,#3350);+#3349 = CARTESIAN_POINT('',(4.886921905584,0.));+#3350 = VECTOR('',#3351,1.);+#3351 = DIRECTION('',(0.,-1.));+#3352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3353 = ORIENTED_EDGE('',*,*,#3354,.T.);+#3354 = EDGE_CURVE('',#3327,#3355,#3357,.T.);+#3355 = VERTEX_POINT('',#3356);+#3356 = CARTESIAN_POINT('',(2.65,-3.725,1.175));+#3357 = SURFACE_CURVE('',#3358,(#3362,#3369),.PCURVE_S1.);+#3358 = LINE('',#3359,#3360);+#3359 = CARTESIAN_POINT('',(3.15,-3.725,1.175));+#3360 = VECTOR('',#3361,1.);+#3361 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3362 = PCURVE('',#2041,#3363);+#3363 = DEFINITIONAL_REPRESENTATION('',(#3364),#3368);+#3364 = LINE('',#3365,#3366);+#3365 = CARTESIAN_POINT('',(3.15,7.8));+#3366 = VECTOR('',#3367,1.);+#3367 = DIRECTION('',(-1.,-1.18971702004E-17));+#3368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3369 = PCURVE('',#3370,#3375);+#3370 = PLANE('',#3371);+#3371 = AXIS2_PLACEMENT_3D('',#3372,#3373,#3374);+#3372 = CARTESIAN_POINT('',(3.278710000798,-3.725,0.659796909381));+#3373 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3374 = DIRECTION('',(0.,0.,1.));+#3375 = DEFINITIONAL_REPRESENTATION('',(#3376),#3380);+#3376 = LINE('',#3377,#3378);+#3377 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3378 = VECTOR('',#3379,1.);+#3379 = DIRECTION('',(0.,1.));+#3380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3381 = ORIENTED_EDGE('',*,*,#3382,.T.);+#3382 = EDGE_CURVE('',#3355,#3383,#3385,.T.);+#3383 = VERTEX_POINT('',#3384);+#3384 = CARTESIAN_POINT('',(2.65,-3.9,1.175));+#3385 = SURFACE_CURVE('',#3386,(#3390,#3397),.PCURVE_S1.);+#3386 = LINE('',#3387,#3388);+#3387 = CARTESIAN_POINT('',(2.65,3.9,1.175));+#3388 = VECTOR('',#3389,1.);+#3389 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3390 = PCURVE('',#2041,#3391);+#3391 = DEFINITIONAL_REPRESENTATION('',(#3392),#3396);+#3392 = LINE('',#3393,#3394);+#3393 = CARTESIAN_POINT('',(2.65,0.175));+#3394 = VECTOR('',#3395,1.);+#3395 = DIRECTION('',(-1.18971702004E-17,1.));+#3396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3397 = PCURVE('',#1266,#3398);+#3398 = DEFINITIONAL_REPRESENTATION('',(#3399),#3403);+#3399 = LINE('',#3400,#3401);+#3400 = CARTESIAN_POINT('',(0.,0.));+#3401 = VECTOR('',#3402,1.);+#3402 = DIRECTION('',(1.,0.));+#3403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3404 = ORIENTED_EDGE('',*,*,#3405,.T.);+#3405 = EDGE_CURVE('',#3383,#3406,#3408,.T.);+#3406 = VERTEX_POINT('',#3407);+#3407 = CARTESIAN_POINT('',(2.45,-4.1,1.175));+#3408 = SURFACE_CURVE('',#3409,(#3413,#3420),.PCURVE_S1.);+#3409 = LINE('',#3410,#3411);+#3410 = CARTESIAN_POINT('',(2.65,-3.9,1.175));+#3411 = VECTOR('',#3412,1.);+#3412 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#3413 = PCURVE('',#2041,#3414);+#3414 = DEFINITIONAL_REPRESENTATION('',(#3415),#3419);+#3415 = LINE('',#3416,#3417);+#3416 = CARTESIAN_POINT('',(2.65,7.975));+#3417 = VECTOR('',#3418,1.);+#3418 = DIRECTION('',(-0.707106781187,0.707106781187));+#3419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3420 = PCURVE('',#1187,#3421);+#3421 = DEFINITIONAL_REPRESENTATION('',(#3422),#3426);+#3422 = LINE('',#3423,#3424);+#3423 = CARTESIAN_POINT('',(0.,0.));+#3424 = VECTOR('',#3425,1.);+#3425 = DIRECTION('',(1.,0.));+#3426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3427 = ORIENTED_EDGE('',*,*,#3428,.T.);+#3428 = EDGE_CURVE('',#3406,#3429,#3431,.T.);+#3429 = VERTEX_POINT('',#3430);+#3430 = CARTESIAN_POINT('',(-2.45,-4.1,1.175));+#3431 = SURFACE_CURVE('',#3432,(#3436,#3443),.PCURVE_S1.);+#3432 = LINE('',#3433,#3434);+#3433 = CARTESIAN_POINT('',(2.45,-4.1,1.175));+#3434 = VECTOR('',#3435,1.);+#3435 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3436 = PCURVE('',#2041,#3437);+#3437 = DEFINITIONAL_REPRESENTATION('',(#3438),#3442);+#3438 = LINE('',#3439,#3440);+#3439 = CARTESIAN_POINT('',(2.45,8.175));+#3440 = VECTOR('',#3441,1.);+#3441 = DIRECTION('',(-1.,-1.18971702004E-17));+#3442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3443 = PCURVE('',#1108,#3444);+#3444 = DEFINITIONAL_REPRESENTATION('',(#3445),#3449);+#3445 = LINE('',#3446,#3447);+#3446 = CARTESIAN_POINT('',(0.,0.));+#3447 = VECTOR('',#3448,1.);+#3448 = DIRECTION('',(1.,0.));+#3449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3450 = ORIENTED_EDGE('',*,*,#3451,.T.);+#3451 = EDGE_CURVE('',#3429,#3452,#3454,.T.);+#3452 = VERTEX_POINT('',#3453);+#3453 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#3454 = SURFACE_CURVE('',#3455,(#3459,#3466),.PCURVE_S1.);+#3455 = LINE('',#3456,#3457);+#3456 = CARTESIAN_POINT('',(-2.45,-4.1,1.175));+#3457 = VECTOR('',#3458,1.);+#3458 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#3459 = PCURVE('',#2041,#3460);+#3460 = DEFINITIONAL_REPRESENTATION('',(#3461),#3465);+#3461 = LINE('',#3462,#3463);+#3462 = CARTESIAN_POINT('',(-2.45,8.175));+#3463 = VECTOR('',#3464,1.);+#3464 = DIRECTION('',(-0.707106781187,-0.707106781187));+#3465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3466 = PCURVE('',#1029,#3467);+#3467 = DEFINITIONAL_REPRESENTATION('',(#3468),#3472);+#3468 = LINE('',#3469,#3470);+#3469 = CARTESIAN_POINT('',(0.,0.));+#3470 = VECTOR('',#3471,1.);+#3471 = DIRECTION('',(1.,0.));+#3472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3473 = ORIENTED_EDGE('',*,*,#3474,.T.);+#3474 = EDGE_CURVE('',#3452,#3475,#3477,.T.);+#3475 = VERTEX_POINT('',#3476);+#3476 = CARTESIAN_POINT('',(-2.65,-3.725,1.175));+#3477 = SURFACE_CURVE('',#3478,(#3482,#3489),.PCURVE_S1.);+#3478 = LINE('',#3479,#3480);+#3479 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#3480 = VECTOR('',#3481,1.);+#3481 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3482 = PCURVE('',#2041,#3483);+#3483 = DEFINITIONAL_REPRESENTATION('',(#3484),#3488);+#3484 = LINE('',#3485,#3486);+#3485 = CARTESIAN_POINT('',(-2.65,7.975));+#3486 = VECTOR('',#3487,1.);+#3487 = DIRECTION('',(1.18971702004E-17,-1.));+#3488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3489 = PCURVE('',#950,#3490);+#3490 = DEFINITIONAL_REPRESENTATION('',(#3491),#3495);+#3491 = LINE('',#3492,#3493);+#3492 = CARTESIAN_POINT('',(0.,0.));+#3493 = VECTOR('',#3494,1.);+#3494 = DIRECTION('',(1.,0.));+#3495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3496 = ORIENTED_EDGE('',*,*,#3497,.F.);+#3497 = EDGE_CURVE('',#3498,#3475,#3500,.T.);+#3498 = VERTEX_POINT('',#3499);+#3499 = CARTESIAN_POINT('',(-3.15,-3.725,1.175));+#3500 = SURFACE_CURVE('',#3501,(#3505,#3512),.PCURVE_S1.);+#3501 = LINE('',#3502,#3503);+#3502 = CARTESIAN_POINT('',(-3.15,-3.725,1.175));+#3503 = VECTOR('',#3504,1.);+#3504 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3505 = PCURVE('',#2041,#3506);+#3506 = DEFINITIONAL_REPRESENTATION('',(#3507),#3511);+#3507 = LINE('',#3508,#3509);+#3508 = CARTESIAN_POINT('',(-3.15,7.8));+#3509 = VECTOR('',#3510,1.);+#3510 = DIRECTION('',(1.,1.343618501151E-16));+#3511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3512 = PCURVE('',#3513,#3518);+#3513 = PLANE('',#3514);+#3514 = AXIS2_PLACEMENT_3D('',#3515,#3516,#3517);+#3515 = CARTESIAN_POINT('',(-3.278710000798,-3.725,0.659796909381));+#3516 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3517 = DIRECTION('',(0.,-0.,1.));+#3518 = DEFINITIONAL_REPRESENTATION('',(#3519),#3523);+#3519 = LINE('',#3520,#3521);+#3520 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3521 = VECTOR('',#3522,1.);+#3522 = DIRECTION('',(0.,1.));+#3523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3524 = ORIENTED_EDGE('',*,*,#3525,.T.);+#3525 = EDGE_CURVE('',#3498,#3526,#3528,.T.);+#3526 = VERTEX_POINT('',#3527);+#3527 = CARTESIAN_POINT('',(-3.15,-3.425,1.175));+#3528 = SURFACE_CURVE('',#3529,(#3533,#3540),.PCURVE_S1.);+#3529 = LINE('',#3530,#3531);+#3530 = CARTESIAN_POINT('',(-3.15,-3.725,1.175));+#3531 = VECTOR('',#3532,1.);+#3532 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3533 = PCURVE('',#2041,#3534);+#3534 = DEFINITIONAL_REPRESENTATION('',(#3535),#3539);+#3535 = LINE('',#3536,#3537);+#3536 = CARTESIAN_POINT('',(-3.15,7.8));+#3537 = VECTOR('',#3538,1.);+#3538 = DIRECTION('',(1.343618501151E-16,-1.));+#3539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3540 = PCURVE('',#3541,#3546);+#3541 = CYLINDRICAL_SURFACE('',#3542,0.25);+#3542 = AXIS2_PLACEMENT_3D('',#3543,#3544,#3545);+#3543 = CARTESIAN_POINT('',(-3.15,-3.725,0.925));+#3544 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3545 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#3546 = DEFINITIONAL_REPRESENTATION('',(#3547),#3551);+#3547 = LINE('',#3548,#3549);+#3548 = CARTESIAN_POINT('',(4.886921905584,0.));+#3549 = VECTOR('',#3550,1.);+#3550 = DIRECTION('',(0.,-1.));+#3551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3552 = ORIENTED_EDGE('',*,*,#3553,.T.);+#3553 = EDGE_CURVE('',#3526,#3554,#3556,.T.);+#3554 = VERTEX_POINT('',#3555);+#3555 = CARTESIAN_POINT('',(-2.65,-3.425,1.175));+#3556 = SURFACE_CURVE('',#3557,(#3561,#3568),.PCURVE_S1.);+#3557 = LINE('',#3558,#3559);+#3558 = CARTESIAN_POINT('',(-3.15,-3.425,1.175));+#3559 = VECTOR('',#3560,1.);+#3560 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3561 = PCURVE('',#2041,#3562);+#3562 = DEFINITIONAL_REPRESENTATION('',(#3563),#3567);+#3563 = LINE('',#3564,#3565);+#3564 = CARTESIAN_POINT('',(-3.15,7.5));+#3565 = VECTOR('',#3566,1.);+#3566 = DIRECTION('',(1.,1.343618501151E-16));+#3567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3568 = PCURVE('',#3569,#3574);+#3569 = PLANE('',#3570);+#3570 = AXIS2_PLACEMENT_3D('',#3571,#3572,#3573);+#3571 = CARTESIAN_POINT('',(-3.278710000798,-3.425,0.659796909381));+#3572 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3573 = DIRECTION('',(0.,-0.,1.));+#3574 = DEFINITIONAL_REPRESENTATION('',(#3575),#3579);+#3575 = LINE('',#3576,#3577);+#3576 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3577 = VECTOR('',#3578,1.);+#3578 = DIRECTION('',(0.,1.));+#3579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3580 = ORIENTED_EDGE('',*,*,#3581,.T.);+#3581 = EDGE_CURVE('',#3554,#3582,#3584,.T.);+#3582 = VERTEX_POINT('',#3583);+#3583 = CARTESIAN_POINT('',(-2.65,-3.075,1.175));+#3584 = SURFACE_CURVE('',#3585,(#3589,#3596),.PCURVE_S1.);+#3585 = LINE('',#3586,#3587);+#3586 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#3587 = VECTOR('',#3588,1.);+#3588 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3589 = PCURVE('',#2041,#3590);+#3590 = DEFINITIONAL_REPRESENTATION('',(#3591),#3595);+#3591 = LINE('',#3592,#3593);+#3592 = CARTESIAN_POINT('',(-2.65,7.975));+#3593 = VECTOR('',#3594,1.);+#3594 = DIRECTION('',(1.18971702004E-17,-1.));+#3595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3596 = PCURVE('',#894,#3597);+#3597 = DEFINITIONAL_REPRESENTATION('',(#3598),#3602);+#3598 = LINE('',#3599,#3600);+#3599 = CARTESIAN_POINT('',(0.,0.));+#3600 = VECTOR('',#3601,1.);+#3601 = DIRECTION('',(1.,0.));+#3602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3603 = ORIENTED_EDGE('',*,*,#3604,.F.);+#3604 = EDGE_CURVE('',#3605,#3582,#3607,.T.);+#3605 = VERTEX_POINT('',#3606);+#3606 = CARTESIAN_POINT('',(-3.15,-3.075,1.175));+#3607 = SURFACE_CURVE('',#3608,(#3612,#3619),.PCURVE_S1.);+#3608 = LINE('',#3609,#3610);+#3609 = CARTESIAN_POINT('',(-3.15,-3.075,1.175));+#3610 = VECTOR('',#3611,1.);+#3611 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3612 = PCURVE('',#2041,#3613);+#3613 = DEFINITIONAL_REPRESENTATION('',(#3614),#3618);+#3614 = LINE('',#3615,#3616);+#3615 = CARTESIAN_POINT('',(-3.15,7.15));+#3616 = VECTOR('',#3617,1.);+#3617 = DIRECTION('',(1.,1.343618501151E-16));+#3618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3619 = PCURVE('',#3620,#3625);+#3620 = PLANE('',#3621);+#3621 = AXIS2_PLACEMENT_3D('',#3622,#3623,#3624);+#3622 = CARTESIAN_POINT('',(-3.278710000798,-3.075,0.659796909381));+#3623 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3624 = DIRECTION('',(0.,-0.,1.));+#3625 = DEFINITIONAL_REPRESENTATION('',(#3626),#3630);+#3626 = LINE('',#3627,#3628);+#3627 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3628 = VECTOR('',#3629,1.);+#3629 = DIRECTION('',(0.,1.));+#3630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3631 = ORIENTED_EDGE('',*,*,#3632,.T.);+#3632 = EDGE_CURVE('',#3605,#3633,#3635,.T.);+#3633 = VERTEX_POINT('',#3634);+#3634 = CARTESIAN_POINT('',(-3.15,-2.775,1.175));+#3635 = SURFACE_CURVE('',#3636,(#3640,#3647),.PCURVE_S1.);+#3636 = LINE('',#3637,#3638);+#3637 = CARTESIAN_POINT('',(-3.15,-3.075,1.175));+#3638 = VECTOR('',#3639,1.);+#3639 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3640 = PCURVE('',#2041,#3641);+#3641 = DEFINITIONAL_REPRESENTATION('',(#3642),#3646);+#3642 = LINE('',#3643,#3644);+#3643 = CARTESIAN_POINT('',(-3.15,7.15));+#3644 = VECTOR('',#3645,1.);+#3645 = DIRECTION('',(1.343618501151E-16,-1.));+#3646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3647 = PCURVE('',#3648,#3653);+#3648 = CYLINDRICAL_SURFACE('',#3649,0.25);+#3649 = AXIS2_PLACEMENT_3D('',#3650,#3651,#3652);+#3650 = CARTESIAN_POINT('',(-3.15,-3.075,0.925));+#3651 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3652 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#3653 = DEFINITIONAL_REPRESENTATION('',(#3654),#3658);+#3654 = LINE('',#3655,#3656);+#3655 = CARTESIAN_POINT('',(4.886921905584,0.));+#3656 = VECTOR('',#3657,1.);+#3657 = DIRECTION('',(0.,-1.));+#3658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3659 = ORIENTED_EDGE('',*,*,#3660,.T.);+#3660 = EDGE_CURVE('',#3633,#3661,#3663,.T.);+#3661 = VERTEX_POINT('',#3662);+#3662 = CARTESIAN_POINT('',(-2.65,-2.775,1.175));+#3663 = SURFACE_CURVE('',#3664,(#3668,#3675),.PCURVE_S1.);+#3664 = LINE('',#3665,#3666);+#3665 = CARTESIAN_POINT('',(-3.15,-2.775,1.175));+#3666 = VECTOR('',#3667,1.);+#3667 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3668 = PCURVE('',#2041,#3669);+#3669 = DEFINITIONAL_REPRESENTATION('',(#3670),#3674);+#3670 = LINE('',#3671,#3672);+#3671 = CARTESIAN_POINT('',(-3.15,6.85));+#3672 = VECTOR('',#3673,1.);+#3673 = DIRECTION('',(1.,1.343618501151E-16));+#3674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3675 = PCURVE('',#3676,#3681);+#3676 = PLANE('',#3677);+#3677 = AXIS2_PLACEMENT_3D('',#3678,#3679,#3680);+#3678 = CARTESIAN_POINT('',(-3.278710000798,-2.775,0.659796909381));+#3679 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3680 = DIRECTION('',(0.,-0.,1.));+#3681 = DEFINITIONAL_REPRESENTATION('',(#3682),#3686);+#3682 = LINE('',#3683,#3684);+#3683 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3684 = VECTOR('',#3685,1.);+#3685 = DIRECTION('',(0.,1.));+#3686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3687 = ORIENTED_EDGE('',*,*,#3688,.T.);+#3688 = EDGE_CURVE('',#3661,#3689,#3691,.T.);+#3689 = VERTEX_POINT('',#3690);+#3690 = CARTESIAN_POINT('',(-2.65,-2.425,1.175));+#3691 = SURFACE_CURVE('',#3692,(#3696,#3703),.PCURVE_S1.);+#3692 = LINE('',#3693,#3694);+#3693 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#3694 = VECTOR('',#3695,1.);+#3695 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3696 = PCURVE('',#2041,#3697);+#3697 = DEFINITIONAL_REPRESENTATION('',(#3698),#3702);+#3698 = LINE('',#3699,#3700);+#3699 = CARTESIAN_POINT('',(-2.65,7.975));+#3700 = VECTOR('',#3701,1.);+#3701 = DIRECTION('',(1.18971702004E-17,-1.));+#3702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3703 = PCURVE('',#838,#3704);+#3704 = DEFINITIONAL_REPRESENTATION('',(#3705),#3709);+#3705 = LINE('',#3706,#3707);+#3706 = CARTESIAN_POINT('',(0.,0.));+#3707 = VECTOR('',#3708,1.);+#3708 = DIRECTION('',(1.,0.));+#3709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3710 = ORIENTED_EDGE('',*,*,#3711,.F.);+#3711 = EDGE_CURVE('',#3712,#3689,#3714,.T.);+#3712 = VERTEX_POINT('',#3713);+#3713 = CARTESIAN_POINT('',(-3.15,-2.425,1.175));+#3714 = SURFACE_CURVE('',#3715,(#3719,#3726),.PCURVE_S1.);+#3715 = LINE('',#3716,#3717);+#3716 = CARTESIAN_POINT('',(-3.15,-2.425,1.175));+#3717 = VECTOR('',#3718,1.);+#3718 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3719 = PCURVE('',#2041,#3720);+#3720 = DEFINITIONAL_REPRESENTATION('',(#3721),#3725);+#3721 = LINE('',#3722,#3723);+#3722 = CARTESIAN_POINT('',(-3.15,6.5));+#3723 = VECTOR('',#3724,1.);+#3724 = DIRECTION('',(1.,1.343618501151E-16));+#3725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3726 = PCURVE('',#3727,#3732);+#3727 = PLANE('',#3728);+#3728 = AXIS2_PLACEMENT_3D('',#3729,#3730,#3731);+#3729 = CARTESIAN_POINT('',(-3.278710000798,-2.425,0.659796909381));+#3730 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3731 = DIRECTION('',(0.,-0.,1.));+#3732 = DEFINITIONAL_REPRESENTATION('',(#3733),#3737);+#3733 = LINE('',#3734,#3735);+#3734 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3735 = VECTOR('',#3736,1.);+#3736 = DIRECTION('',(0.,1.));+#3737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3738 = ORIENTED_EDGE('',*,*,#3739,.T.);+#3739 = EDGE_CURVE('',#3712,#3740,#3742,.T.);+#3740 = VERTEX_POINT('',#3741);+#3741 = CARTESIAN_POINT('',(-3.15,-2.125,1.175));+#3742 = SURFACE_CURVE('',#3743,(#3747,#3754),.PCURVE_S1.);+#3743 = LINE('',#3744,#3745);+#3744 = CARTESIAN_POINT('',(-3.15,-2.425,1.175));+#3745 = VECTOR('',#3746,1.);+#3746 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3747 = PCURVE('',#2041,#3748);+#3748 = DEFINITIONAL_REPRESENTATION('',(#3749),#3753);+#3749 = LINE('',#3750,#3751);+#3750 = CARTESIAN_POINT('',(-3.15,6.5));+#3751 = VECTOR('',#3752,1.);+#3752 = DIRECTION('',(1.343618501151E-16,-1.));+#3753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3754 = PCURVE('',#3755,#3760);+#3755 = CYLINDRICAL_SURFACE('',#3756,0.25);+#3756 = AXIS2_PLACEMENT_3D('',#3757,#3758,#3759);+#3757 = CARTESIAN_POINT('',(-3.15,-2.425,0.925));+#3758 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3759 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#3760 = DEFINITIONAL_REPRESENTATION('',(#3761),#3765);+#3761 = LINE('',#3762,#3763);+#3762 = CARTESIAN_POINT('',(4.886921905584,0.));+#3763 = VECTOR('',#3764,1.);+#3764 = DIRECTION('',(0.,-1.));+#3765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3766 = ORIENTED_EDGE('',*,*,#3767,.T.);+#3767 = EDGE_CURVE('',#3740,#3768,#3770,.T.);+#3768 = VERTEX_POINT('',#3769);+#3769 = CARTESIAN_POINT('',(-2.65,-2.125,1.175));+#3770 = SURFACE_CURVE('',#3771,(#3775,#3782),.PCURVE_S1.);+#3771 = LINE('',#3772,#3773);+#3772 = CARTESIAN_POINT('',(-3.15,-2.125,1.175));+#3773 = VECTOR('',#3774,1.);+#3774 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3775 = PCURVE('',#2041,#3776);+#3776 = DEFINITIONAL_REPRESENTATION('',(#3777),#3781);+#3777 = LINE('',#3778,#3779);+#3778 = CARTESIAN_POINT('',(-3.15,6.2));+#3779 = VECTOR('',#3780,1.);+#3780 = DIRECTION('',(1.,1.343618501151E-16));+#3781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3782 = PCURVE('',#3783,#3788);+#3783 = PLANE('',#3784);+#3784 = AXIS2_PLACEMENT_3D('',#3785,#3786,#3787);+#3785 = CARTESIAN_POINT('',(-3.278710000798,-2.125,0.659796909381));+#3786 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3787 = DIRECTION('',(0.,-0.,1.));+#3788 = DEFINITIONAL_REPRESENTATION('',(#3789),#3793);+#3789 = LINE('',#3790,#3791);+#3790 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3791 = VECTOR('',#3792,1.);+#3792 = DIRECTION('',(0.,1.));+#3793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3794 = ORIENTED_EDGE('',*,*,#3795,.T.);+#3795 = EDGE_CURVE('',#3768,#3796,#3798,.T.);+#3796 = VERTEX_POINT('',#3797);+#3797 = CARTESIAN_POINT('',(-2.65,-1.775,1.175));+#3798 = SURFACE_CURVE('',#3799,(#3803,#3810),.PCURVE_S1.);+#3799 = LINE('',#3800,#3801);+#3800 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#3801 = VECTOR('',#3802,1.);+#3802 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3803 = PCURVE('',#2041,#3804);+#3804 = DEFINITIONAL_REPRESENTATION('',(#3805),#3809);+#3805 = LINE('',#3806,#3807);+#3806 = CARTESIAN_POINT('',(-2.65,7.975));+#3807 = VECTOR('',#3808,1.);+#3808 = DIRECTION('',(1.18971702004E-17,-1.));+#3809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3810 = PCURVE('',#782,#3811);+#3811 = DEFINITIONAL_REPRESENTATION('',(#3812),#3816);+#3812 = LINE('',#3813,#3814);+#3813 = CARTESIAN_POINT('',(0.,0.));+#3814 = VECTOR('',#3815,1.);+#3815 = DIRECTION('',(1.,0.));+#3816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3817 = ORIENTED_EDGE('',*,*,#3818,.F.);+#3818 = EDGE_CURVE('',#3819,#3796,#3821,.T.);+#3819 = VERTEX_POINT('',#3820);+#3820 = CARTESIAN_POINT('',(-3.15,-1.775,1.175));+#3821 = SURFACE_CURVE('',#3822,(#3826,#3833),.PCURVE_S1.);+#3822 = LINE('',#3823,#3824);+#3823 = CARTESIAN_POINT('',(-3.15,-1.775,1.175));+#3824 = VECTOR('',#3825,1.);+#3825 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3826 = PCURVE('',#2041,#3827);+#3827 = DEFINITIONAL_REPRESENTATION('',(#3828),#3832);+#3828 = LINE('',#3829,#3830);+#3829 = CARTESIAN_POINT('',(-3.15,5.85));+#3830 = VECTOR('',#3831,1.);+#3831 = DIRECTION('',(1.,1.343618501151E-16));+#3832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3833 = PCURVE('',#3834,#3839);+#3834 = PLANE('',#3835);+#3835 = AXIS2_PLACEMENT_3D('',#3836,#3837,#3838);+#3836 = CARTESIAN_POINT('',(-3.278710000798,-1.775,0.659796909381));+#3837 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3838 = DIRECTION('',(0.,-0.,1.));+#3839 = DEFINITIONAL_REPRESENTATION('',(#3840),#3844);+#3840 = LINE('',#3841,#3842);+#3841 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3842 = VECTOR('',#3843,1.);+#3843 = DIRECTION('',(0.,1.));+#3844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3845 = ORIENTED_EDGE('',*,*,#3846,.T.);+#3846 = EDGE_CURVE('',#3819,#3847,#3849,.T.);+#3847 = VERTEX_POINT('',#3848);+#3848 = CARTESIAN_POINT('',(-3.15,-1.475,1.175));+#3849 = SURFACE_CURVE('',#3850,(#3854,#3861),.PCURVE_S1.);+#3850 = LINE('',#3851,#3852);+#3851 = CARTESIAN_POINT('',(-3.15,-1.775,1.175));+#3852 = VECTOR('',#3853,1.);+#3853 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3854 = PCURVE('',#2041,#3855);+#3855 = DEFINITIONAL_REPRESENTATION('',(#3856),#3860);+#3856 = LINE('',#3857,#3858);+#3857 = CARTESIAN_POINT('',(-3.15,5.85));+#3858 = VECTOR('',#3859,1.);+#3859 = DIRECTION('',(1.343618501151E-16,-1.));+#3860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3861 = PCURVE('',#3862,#3867);+#3862 = CYLINDRICAL_SURFACE('',#3863,0.25);+#3863 = AXIS2_PLACEMENT_3D('',#3864,#3865,#3866);+#3864 = CARTESIAN_POINT('',(-3.15,-1.775,0.925));+#3865 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3866 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#3867 = DEFINITIONAL_REPRESENTATION('',(#3868),#3872);+#3868 = LINE('',#3869,#3870);+#3869 = CARTESIAN_POINT('',(4.886921905584,0.));+#3870 = VECTOR('',#3871,1.);+#3871 = DIRECTION('',(0.,-1.));+#3872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3873 = ORIENTED_EDGE('',*,*,#3874,.T.);+#3874 = EDGE_CURVE('',#3847,#3875,#3877,.T.);+#3875 = VERTEX_POINT('',#3876);+#3876 = CARTESIAN_POINT('',(-2.65,-1.475,1.175));+#3877 = SURFACE_CURVE('',#3878,(#3882,#3889),.PCURVE_S1.);+#3878 = LINE('',#3879,#3880);+#3879 = CARTESIAN_POINT('',(-3.15,-1.475,1.175));+#3880 = VECTOR('',#3881,1.);+#3881 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3882 = PCURVE('',#2041,#3883);+#3883 = DEFINITIONAL_REPRESENTATION('',(#3884),#3888);+#3884 = LINE('',#3885,#3886);+#3885 = CARTESIAN_POINT('',(-3.15,5.55));+#3886 = VECTOR('',#3887,1.);+#3887 = DIRECTION('',(1.,1.343618501151E-16));+#3888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3889 = PCURVE('',#3890,#3895);+#3890 = PLANE('',#3891);+#3891 = AXIS2_PLACEMENT_3D('',#3892,#3893,#3894);+#3892 = CARTESIAN_POINT('',(-3.278710000798,-1.475,0.659796909381));+#3893 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3894 = DIRECTION('',(0.,-0.,1.));+#3895 = DEFINITIONAL_REPRESENTATION('',(#3896),#3900);+#3896 = LINE('',#3897,#3898);+#3897 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3898 = VECTOR('',#3899,1.);+#3899 = DIRECTION('',(0.,1.));+#3900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3901 = ORIENTED_EDGE('',*,*,#3902,.T.);+#3902 = EDGE_CURVE('',#3875,#3903,#3905,.T.);+#3903 = VERTEX_POINT('',#3904);+#3904 = CARTESIAN_POINT('',(-2.65,-1.125,1.175));+#3905 = SURFACE_CURVE('',#3906,(#3910,#3917),.PCURVE_S1.);+#3906 = LINE('',#3907,#3908);+#3907 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#3908 = VECTOR('',#3909,1.);+#3909 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3910 = PCURVE('',#2041,#3911);+#3911 = DEFINITIONAL_REPRESENTATION('',(#3912),#3916);+#3912 = LINE('',#3913,#3914);+#3913 = CARTESIAN_POINT('',(-2.65,7.975));+#3914 = VECTOR('',#3915,1.);+#3915 = DIRECTION('',(1.18971702004E-17,-1.));+#3916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3917 = PCURVE('',#726,#3918);+#3918 = DEFINITIONAL_REPRESENTATION('',(#3919),#3923);+#3919 = LINE('',#3920,#3921);+#3920 = CARTESIAN_POINT('',(0.,0.));+#3921 = VECTOR('',#3922,1.);+#3922 = DIRECTION('',(1.,0.));+#3923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3924 = ORIENTED_EDGE('',*,*,#3925,.F.);+#3925 = EDGE_CURVE('',#3926,#3903,#3928,.T.);+#3926 = VERTEX_POINT('',#3927);+#3927 = CARTESIAN_POINT('',(-3.15,-1.125,1.175));+#3928 = SURFACE_CURVE('',#3929,(#3933,#3940),.PCURVE_S1.);+#3929 = LINE('',#3930,#3931);+#3930 = CARTESIAN_POINT('',(-3.15,-1.125,1.175));+#3931 = VECTOR('',#3932,1.);+#3932 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3933 = PCURVE('',#2041,#3934);+#3934 = DEFINITIONAL_REPRESENTATION('',(#3935),#3939);+#3935 = LINE('',#3936,#3937);+#3936 = CARTESIAN_POINT('',(-3.15,5.2));+#3937 = VECTOR('',#3938,1.);+#3938 = DIRECTION('',(1.,1.343618501151E-16));+#3939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3940 = PCURVE('',#3941,#3946);+#3941 = PLANE('',#3942);+#3942 = AXIS2_PLACEMENT_3D('',#3943,#3944,#3945);+#3943 = CARTESIAN_POINT('',(-3.278710000798,-1.125,0.659796909381));+#3944 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3945 = DIRECTION('',(0.,-0.,1.));+#3946 = DEFINITIONAL_REPRESENTATION('',(#3947),#3951);+#3947 = LINE('',#3948,#3949);+#3948 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#3949 = VECTOR('',#3950,1.);+#3950 = DIRECTION('',(0.,1.));+#3951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3952 = ORIENTED_EDGE('',*,*,#3953,.T.);+#3953 = EDGE_CURVE('',#3926,#3954,#3956,.T.);+#3954 = VERTEX_POINT('',#3955);+#3955 = CARTESIAN_POINT('',(-3.15,-0.825,1.175));+#3956 = SURFACE_CURVE('',#3957,(#3961,#3968),.PCURVE_S1.);+#3957 = LINE('',#3958,#3959);+#3958 = CARTESIAN_POINT('',(-3.15,-1.125,1.175));+#3959 = VECTOR('',#3960,1.);+#3960 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3961 = PCURVE('',#2041,#3962);+#3962 = DEFINITIONAL_REPRESENTATION('',(#3963),#3967);+#3963 = LINE('',#3964,#3965);+#3964 = CARTESIAN_POINT('',(-3.15,5.2));+#3965 = VECTOR('',#3966,1.);+#3966 = DIRECTION('',(1.343618501151E-16,-1.));+#3967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3968 = PCURVE('',#3969,#3974);+#3969 = CYLINDRICAL_SURFACE('',#3970,0.25);+#3970 = AXIS2_PLACEMENT_3D('',#3971,#3972,#3973);+#3971 = CARTESIAN_POINT('',(-3.15,-1.125,0.925));+#3972 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3973 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#3974 = DEFINITIONAL_REPRESENTATION('',(#3975),#3979);+#3975 = LINE('',#3976,#3977);+#3976 = CARTESIAN_POINT('',(4.886921905584,0.));+#3977 = VECTOR('',#3978,1.);+#3978 = DIRECTION('',(0.,-1.));+#3979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3980 = ORIENTED_EDGE('',*,*,#3981,.T.);+#3981 = EDGE_CURVE('',#3954,#3982,#3984,.T.);+#3982 = VERTEX_POINT('',#3983);+#3983 = CARTESIAN_POINT('',(-2.65,-0.825,1.175));+#3984 = SURFACE_CURVE('',#3985,(#3989,#3996),.PCURVE_S1.);+#3985 = LINE('',#3986,#3987);+#3986 = CARTESIAN_POINT('',(-3.15,-0.825,1.175));+#3987 = VECTOR('',#3988,1.);+#3988 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3989 = PCURVE('',#2041,#3990);+#3990 = DEFINITIONAL_REPRESENTATION('',(#3991),#3995);+#3991 = LINE('',#3992,#3993);+#3992 = CARTESIAN_POINT('',(-3.15,4.9));+#3993 = VECTOR('',#3994,1.);+#3994 = DIRECTION('',(1.,1.343618501151E-16));+#3995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3996 = PCURVE('',#3997,#4002);+#3997 = PLANE('',#3998);+#3998 = AXIS2_PLACEMENT_3D('',#3999,#4000,#4001);+#3999 = CARTESIAN_POINT('',(-3.278710000798,-0.825,0.659796909381));+#4000 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4001 = DIRECTION('',(0.,-0.,1.));+#4002 = DEFINITIONAL_REPRESENTATION('',(#4003),#4007);+#4003 = LINE('',#4004,#4005);+#4004 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4005 = VECTOR('',#4006,1.);+#4006 = DIRECTION('',(0.,1.));+#4007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4008 = ORIENTED_EDGE('',*,*,#4009,.T.);+#4009 = EDGE_CURVE('',#3982,#4010,#4012,.T.);+#4010 = VERTEX_POINT('',#4011);+#4011 = CARTESIAN_POINT('',(-2.65,-0.475,1.175));+#4012 = SURFACE_CURVE('',#4013,(#4017,#4024),.PCURVE_S1.);+#4013 = LINE('',#4014,#4015);+#4014 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#4015 = VECTOR('',#4016,1.);+#4016 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4017 = PCURVE('',#2041,#4018);+#4018 = DEFINITIONAL_REPRESENTATION('',(#4019),#4023);+#4019 = LINE('',#4020,#4021);+#4020 = CARTESIAN_POINT('',(-2.65,7.975));+#4021 = VECTOR('',#4022,1.);+#4022 = DIRECTION('',(1.18971702004E-17,-1.));+#4023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4024 = PCURVE('',#670,#4025);+#4025 = DEFINITIONAL_REPRESENTATION('',(#4026),#4030);+#4026 = LINE('',#4027,#4028);+#4027 = CARTESIAN_POINT('',(0.,0.));+#4028 = VECTOR('',#4029,1.);+#4029 = DIRECTION('',(1.,0.));+#4030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4031 = ORIENTED_EDGE('',*,*,#4032,.F.);+#4032 = EDGE_CURVE('',#4033,#4010,#4035,.T.);+#4033 = VERTEX_POINT('',#4034);+#4034 = CARTESIAN_POINT('',(-3.15,-0.475,1.175));+#4035 = SURFACE_CURVE('',#4036,(#4040,#4047),.PCURVE_S1.);+#4036 = LINE('',#4037,#4038);+#4037 = CARTESIAN_POINT('',(-3.15,-0.475,1.175));+#4038 = VECTOR('',#4039,1.);+#4039 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4040 = PCURVE('',#2041,#4041);+#4041 = DEFINITIONAL_REPRESENTATION('',(#4042),#4046);+#4042 = LINE('',#4043,#4044);+#4043 = CARTESIAN_POINT('',(-3.15,4.55));+#4044 = VECTOR('',#4045,1.);+#4045 = DIRECTION('',(1.,1.343618501151E-16));+#4046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4047 = PCURVE('',#4048,#4053);+#4048 = PLANE('',#4049);+#4049 = AXIS2_PLACEMENT_3D('',#4050,#4051,#4052);+#4050 = CARTESIAN_POINT('',(-3.278710000798,-0.475,0.659796909381));+#4051 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4052 = DIRECTION('',(0.,-0.,1.));+#4053 = DEFINITIONAL_REPRESENTATION('',(#4054),#4058);+#4054 = LINE('',#4055,#4056);+#4055 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4056 = VECTOR('',#4057,1.);+#4057 = DIRECTION('',(0.,1.));+#4058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4059 = ORIENTED_EDGE('',*,*,#4060,.T.);+#4060 = EDGE_CURVE('',#4033,#4061,#4063,.T.);+#4061 = VERTEX_POINT('',#4062);+#4062 = CARTESIAN_POINT('',(-3.15,-0.175,1.175));+#4063 = SURFACE_CURVE('',#4064,(#4068,#4075),.PCURVE_S1.);+#4064 = LINE('',#4065,#4066);+#4065 = CARTESIAN_POINT('',(-3.15,-0.475,1.175));+#4066 = VECTOR('',#4067,1.);+#4067 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4068 = PCURVE('',#2041,#4069);+#4069 = DEFINITIONAL_REPRESENTATION('',(#4070),#4074);+#4070 = LINE('',#4071,#4072);+#4071 = CARTESIAN_POINT('',(-3.15,4.55));+#4072 = VECTOR('',#4073,1.);+#4073 = DIRECTION('',(1.343618501151E-16,-1.));+#4074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4075 = PCURVE('',#4076,#4081);+#4076 = CYLINDRICAL_SURFACE('',#4077,0.25);+#4077 = AXIS2_PLACEMENT_3D('',#4078,#4079,#4080);+#4078 = CARTESIAN_POINT('',(-3.15,-0.475,0.925));+#4079 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4080 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4081 = DEFINITIONAL_REPRESENTATION('',(#4082),#4086);+#4082 = LINE('',#4083,#4084);+#4083 = CARTESIAN_POINT('',(4.886921905584,0.));+#4084 = VECTOR('',#4085,1.);+#4085 = DIRECTION('',(0.,-1.));+#4086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4087 = ORIENTED_EDGE('',*,*,#4088,.T.);+#4088 = EDGE_CURVE('',#4061,#4089,#4091,.T.);+#4089 = VERTEX_POINT('',#4090);+#4090 = CARTESIAN_POINT('',(-2.65,-0.175,1.175));+#4091 = SURFACE_CURVE('',#4092,(#4096,#4103),.PCURVE_S1.);+#4092 = LINE('',#4093,#4094);+#4093 = CARTESIAN_POINT('',(-3.15,-0.175,1.175));+#4094 = VECTOR('',#4095,1.);+#4095 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4096 = PCURVE('',#2041,#4097);+#4097 = DEFINITIONAL_REPRESENTATION('',(#4098),#4102);+#4098 = LINE('',#4099,#4100);+#4099 = CARTESIAN_POINT('',(-3.15,4.25));+#4100 = VECTOR('',#4101,1.);+#4101 = DIRECTION('',(1.,1.343618501151E-16));+#4102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4103 = PCURVE('',#4104,#4109);+#4104 = PLANE('',#4105);+#4105 = AXIS2_PLACEMENT_3D('',#4106,#4107,#4108);+#4106 = CARTESIAN_POINT('',(-3.278710000798,-0.175,0.659796909381));+#4107 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4108 = DIRECTION('',(0.,-0.,1.));+#4109 = DEFINITIONAL_REPRESENTATION('',(#4110),#4114);+#4110 = LINE('',#4111,#4112);+#4111 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4112 = VECTOR('',#4113,1.);+#4113 = DIRECTION('',(0.,1.));+#4114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4115 = ORIENTED_EDGE('',*,*,#4116,.T.);+#4116 = EDGE_CURVE('',#4089,#4117,#4119,.T.);+#4117 = VERTEX_POINT('',#4118);+#4118 = CARTESIAN_POINT('',(-2.65,0.175,1.175));+#4119 = SURFACE_CURVE('',#4120,(#4124,#4131),.PCURVE_S1.);+#4120 = LINE('',#4121,#4122);+#4121 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#4122 = VECTOR('',#4123,1.);+#4123 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4124 = PCURVE('',#2041,#4125);+#4125 = DEFINITIONAL_REPRESENTATION('',(#4126),#4130);+#4126 = LINE('',#4127,#4128);+#4127 = CARTESIAN_POINT('',(-2.65,7.975));+#4128 = VECTOR('',#4129,1.);+#4129 = DIRECTION('',(1.18971702004E-17,-1.));+#4130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4131 = PCURVE('',#614,#4132);+#4132 = DEFINITIONAL_REPRESENTATION('',(#4133),#4137);+#4133 = LINE('',#4134,#4135);+#4134 = CARTESIAN_POINT('',(0.,0.));+#4135 = VECTOR('',#4136,1.);+#4136 = DIRECTION('',(1.,0.));+#4137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4138 = ORIENTED_EDGE('',*,*,#4139,.F.);+#4139 = EDGE_CURVE('',#4140,#4117,#4142,.T.);+#4140 = VERTEX_POINT('',#4141);+#4141 = CARTESIAN_POINT('',(-3.15,0.175,1.175));+#4142 = SURFACE_CURVE('',#4143,(#4147,#4154),.PCURVE_S1.);+#4143 = LINE('',#4144,#4145);+#4144 = CARTESIAN_POINT('',(-3.15,0.175,1.175));+#4145 = VECTOR('',#4146,1.);+#4146 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4147 = PCURVE('',#2041,#4148);+#4148 = DEFINITIONAL_REPRESENTATION('',(#4149),#4153);+#4149 = LINE('',#4150,#4151);+#4150 = CARTESIAN_POINT('',(-3.15,3.9));+#4151 = VECTOR('',#4152,1.);+#4152 = DIRECTION('',(1.,1.343618501151E-16));+#4153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4154 = PCURVE('',#4155,#4160);+#4155 = PLANE('',#4156);+#4156 = AXIS2_PLACEMENT_3D('',#4157,#4158,#4159);+#4157 = CARTESIAN_POINT('',(-3.278710000798,0.175,0.659796909381));+#4158 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4159 = DIRECTION('',(0.,-0.,1.));+#4160 = DEFINITIONAL_REPRESENTATION('',(#4161),#4165);+#4161 = LINE('',#4162,#4163);+#4162 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4163 = VECTOR('',#4164,1.);+#4164 = DIRECTION('',(0.,1.));+#4165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4166 = ORIENTED_EDGE('',*,*,#4167,.T.);+#4167 = EDGE_CURVE('',#4140,#4168,#4170,.T.);+#4168 = VERTEX_POINT('',#4169);+#4169 = CARTESIAN_POINT('',(-3.15,0.475,1.175));+#4170 = SURFACE_CURVE('',#4171,(#4175,#4182),.PCURVE_S1.);+#4171 = LINE('',#4172,#4173);+#4172 = CARTESIAN_POINT('',(-3.15,0.175,1.175));+#4173 = VECTOR('',#4174,1.);+#4174 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4175 = PCURVE('',#2041,#4176);+#4176 = DEFINITIONAL_REPRESENTATION('',(#4177),#4181);+#4177 = LINE('',#4178,#4179);+#4178 = CARTESIAN_POINT('',(-3.15,3.9));+#4179 = VECTOR('',#4180,1.);+#4180 = DIRECTION('',(1.343618501151E-16,-1.));+#4181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4182 = PCURVE('',#4183,#4188);+#4183 = CYLINDRICAL_SURFACE('',#4184,0.25);+#4184 = AXIS2_PLACEMENT_3D('',#4185,#4186,#4187);+#4185 = CARTESIAN_POINT('',(-3.15,0.175,0.925));+#4186 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4187 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4188 = DEFINITIONAL_REPRESENTATION('',(#4189),#4193);+#4189 = LINE('',#4190,#4191);+#4190 = CARTESIAN_POINT('',(4.886921905584,0.));+#4191 = VECTOR('',#4192,1.);+#4192 = DIRECTION('',(0.,-1.));+#4193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4194 = ORIENTED_EDGE('',*,*,#4195,.T.);+#4195 = EDGE_CURVE('',#4168,#4196,#4198,.T.);+#4196 = VERTEX_POINT('',#4197);+#4197 = CARTESIAN_POINT('',(-2.65,0.475,1.175));+#4198 = SURFACE_CURVE('',#4199,(#4203,#4210),.PCURVE_S1.);+#4199 = LINE('',#4200,#4201);+#4200 = CARTESIAN_POINT('',(-3.15,0.475,1.175));+#4201 = VECTOR('',#4202,1.);+#4202 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4203 = PCURVE('',#2041,#4204);+#4204 = DEFINITIONAL_REPRESENTATION('',(#4205),#4209);+#4205 = LINE('',#4206,#4207);+#4206 = CARTESIAN_POINT('',(-3.15,3.6));+#4207 = VECTOR('',#4208,1.);+#4208 = DIRECTION('',(1.,1.343618501151E-16));+#4209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4210 = PCURVE('',#4211,#4216);+#4211 = PLANE('',#4212);+#4212 = AXIS2_PLACEMENT_3D('',#4213,#4214,#4215);+#4213 = CARTESIAN_POINT('',(-3.278710000798,0.475,0.659796909381));+#4214 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4215 = DIRECTION('',(0.,-0.,1.));+#4216 = DEFINITIONAL_REPRESENTATION('',(#4217),#4221);+#4217 = LINE('',#4218,#4219);+#4218 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4219 = VECTOR('',#4220,1.);+#4220 = DIRECTION('',(0.,1.));+#4221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4222 = ORIENTED_EDGE('',*,*,#4223,.T.);+#4223 = EDGE_CURVE('',#4196,#4224,#4226,.T.);+#4224 = VERTEX_POINT('',#4225);+#4225 = CARTESIAN_POINT('',(-2.65,0.825,1.175));+#4226 = SURFACE_CURVE('',#4227,(#4231,#4238),.PCURVE_S1.);+#4227 = LINE('',#4228,#4229);+#4228 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#4229 = VECTOR('',#4230,1.);+#4230 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4231 = PCURVE('',#2041,#4232);+#4232 = DEFINITIONAL_REPRESENTATION('',(#4233),#4237);+#4233 = LINE('',#4234,#4235);+#4234 = CARTESIAN_POINT('',(-2.65,7.975));+#4235 = VECTOR('',#4236,1.);+#4236 = DIRECTION('',(1.18971702004E-17,-1.));+#4237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4238 = PCURVE('',#558,#4239);+#4239 = DEFINITIONAL_REPRESENTATION('',(#4240),#4244);+#4240 = LINE('',#4241,#4242);+#4241 = CARTESIAN_POINT('',(0.,0.));+#4242 = VECTOR('',#4243,1.);+#4243 = DIRECTION('',(1.,0.));+#4244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4245 = ORIENTED_EDGE('',*,*,#4246,.F.);+#4246 = EDGE_CURVE('',#4247,#4224,#4249,.T.);+#4247 = VERTEX_POINT('',#4248);+#4248 = CARTESIAN_POINT('',(-3.15,0.825,1.175));+#4249 = SURFACE_CURVE('',#4250,(#4254,#4261),.PCURVE_S1.);+#4250 = LINE('',#4251,#4252);+#4251 = CARTESIAN_POINT('',(-3.15,0.825,1.175));+#4252 = VECTOR('',#4253,1.);+#4253 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4254 = PCURVE('',#2041,#4255);+#4255 = DEFINITIONAL_REPRESENTATION('',(#4256),#4260);+#4256 = LINE('',#4257,#4258);+#4257 = CARTESIAN_POINT('',(-3.15,3.25));+#4258 = VECTOR('',#4259,1.);+#4259 = DIRECTION('',(1.,1.343618501151E-16));+#4260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4261 = PCURVE('',#4262,#4267);+#4262 = PLANE('',#4263);+#4263 = AXIS2_PLACEMENT_3D('',#4264,#4265,#4266);+#4264 = CARTESIAN_POINT('',(-3.278710000798,0.825,0.659796909381));+#4265 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4266 = DIRECTION('',(0.,-0.,1.));+#4267 = DEFINITIONAL_REPRESENTATION('',(#4268),#4272);+#4268 = LINE('',#4269,#4270);+#4269 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4270 = VECTOR('',#4271,1.);+#4271 = DIRECTION('',(0.,1.));+#4272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4273 = ORIENTED_EDGE('',*,*,#4274,.T.);+#4274 = EDGE_CURVE('',#4247,#4275,#4277,.T.);+#4275 = VERTEX_POINT('',#4276);+#4276 = CARTESIAN_POINT('',(-3.15,1.125,1.175));+#4277 = SURFACE_CURVE('',#4278,(#4282,#4289),.PCURVE_S1.);+#4278 = LINE('',#4279,#4280);+#4279 = CARTESIAN_POINT('',(-3.15,0.825,1.175));+#4280 = VECTOR('',#4281,1.);+#4281 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4282 = PCURVE('',#2041,#4283);+#4283 = DEFINITIONAL_REPRESENTATION('',(#4284),#4288);+#4284 = LINE('',#4285,#4286);+#4285 = CARTESIAN_POINT('',(-3.15,3.25));+#4286 = VECTOR('',#4287,1.);+#4287 = DIRECTION('',(1.343618501151E-16,-1.));+#4288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4289 = PCURVE('',#4290,#4295);+#4290 = CYLINDRICAL_SURFACE('',#4291,0.25);+#4291 = AXIS2_PLACEMENT_3D('',#4292,#4293,#4294);+#4292 = CARTESIAN_POINT('',(-3.15,0.825,0.925));+#4293 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4294 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4295 = DEFINITIONAL_REPRESENTATION('',(#4296),#4300);+#4296 = LINE('',#4297,#4298);+#4297 = CARTESIAN_POINT('',(4.886921905584,0.));+#4298 = VECTOR('',#4299,1.);+#4299 = DIRECTION('',(0.,-1.));+#4300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4301 = ORIENTED_EDGE('',*,*,#4302,.T.);+#4302 = EDGE_CURVE('',#4275,#4303,#4305,.T.);+#4303 = VERTEX_POINT('',#4304);+#4304 = CARTESIAN_POINT('',(-2.65,1.125,1.175));+#4305 = SURFACE_CURVE('',#4306,(#4310,#4317),.PCURVE_S1.);+#4306 = LINE('',#4307,#4308);+#4307 = CARTESIAN_POINT('',(-3.15,1.125,1.175));+#4308 = VECTOR('',#4309,1.);+#4309 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4310 = PCURVE('',#2041,#4311);+#4311 = DEFINITIONAL_REPRESENTATION('',(#4312),#4316);+#4312 = LINE('',#4313,#4314);+#4313 = CARTESIAN_POINT('',(-3.15,2.95));+#4314 = VECTOR('',#4315,1.);+#4315 = DIRECTION('',(1.,1.343618501151E-16));+#4316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4317 = PCURVE('',#4318,#4323);+#4318 = PLANE('',#4319);+#4319 = AXIS2_PLACEMENT_3D('',#4320,#4321,#4322);+#4320 = CARTESIAN_POINT('',(-3.278710000798,1.125,0.659796909381));+#4321 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4322 = DIRECTION('',(0.,-0.,1.));+#4323 = DEFINITIONAL_REPRESENTATION('',(#4324),#4328);+#4324 = LINE('',#4325,#4326);+#4325 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4326 = VECTOR('',#4327,1.);+#4327 = DIRECTION('',(0.,1.));+#4328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4329 = ORIENTED_EDGE('',*,*,#4330,.T.);+#4330 = EDGE_CURVE('',#4303,#4331,#4333,.T.);+#4331 = VERTEX_POINT('',#4332);+#4332 = CARTESIAN_POINT('',(-2.65,1.475,1.175));+#4333 = SURFACE_CURVE('',#4334,(#4338,#4345),.PCURVE_S1.);+#4334 = LINE('',#4335,#4336);+#4335 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#4336 = VECTOR('',#4337,1.);+#4337 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4338 = PCURVE('',#2041,#4339);+#4339 = DEFINITIONAL_REPRESENTATION('',(#4340),#4344);+#4340 = LINE('',#4341,#4342);+#4341 = CARTESIAN_POINT('',(-2.65,7.975));+#4342 = VECTOR('',#4343,1.);+#4343 = DIRECTION('',(1.18971702004E-17,-1.));+#4344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4345 = PCURVE('',#502,#4346);+#4346 = DEFINITIONAL_REPRESENTATION('',(#4347),#4351);+#4347 = LINE('',#4348,#4349);+#4348 = CARTESIAN_POINT('',(0.,0.));+#4349 = VECTOR('',#4350,1.);+#4350 = DIRECTION('',(1.,0.));+#4351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4352 = ORIENTED_EDGE('',*,*,#4353,.F.);+#4353 = EDGE_CURVE('',#4354,#4331,#4356,.T.);+#4354 = VERTEX_POINT('',#4355);+#4355 = CARTESIAN_POINT('',(-3.15,1.475,1.175));+#4356 = SURFACE_CURVE('',#4357,(#4361,#4368),.PCURVE_S1.);+#4357 = LINE('',#4358,#4359);+#4358 = CARTESIAN_POINT('',(-3.15,1.475,1.175));+#4359 = VECTOR('',#4360,1.);+#4360 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4361 = PCURVE('',#2041,#4362);+#4362 = DEFINITIONAL_REPRESENTATION('',(#4363),#4367);+#4363 = LINE('',#4364,#4365);+#4364 = CARTESIAN_POINT('',(-3.15,2.6));+#4365 = VECTOR('',#4366,1.);+#4366 = DIRECTION('',(1.,1.343618501151E-16));+#4367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4368 = PCURVE('',#4369,#4374);+#4369 = PLANE('',#4370);+#4370 = AXIS2_PLACEMENT_3D('',#4371,#4372,#4373);+#4371 = CARTESIAN_POINT('',(-3.278710000798,1.475,0.659796909381));+#4372 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4373 = DIRECTION('',(0.,-0.,1.));+#4374 = DEFINITIONAL_REPRESENTATION('',(#4375),#4379);+#4375 = LINE('',#4376,#4377);+#4376 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4377 = VECTOR('',#4378,1.);+#4378 = DIRECTION('',(0.,1.));+#4379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4380 = ORIENTED_EDGE('',*,*,#4381,.T.);+#4381 = EDGE_CURVE('',#4354,#4382,#4384,.T.);+#4382 = VERTEX_POINT('',#4383);+#4383 = CARTESIAN_POINT('',(-3.15,1.775,1.175));+#4384 = SURFACE_CURVE('',#4385,(#4389,#4396),.PCURVE_S1.);+#4385 = LINE('',#4386,#4387);+#4386 = CARTESIAN_POINT('',(-3.15,1.475,1.175));+#4387 = VECTOR('',#4388,1.);+#4388 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4389 = PCURVE('',#2041,#4390);+#4390 = DEFINITIONAL_REPRESENTATION('',(#4391),#4395);+#4391 = LINE('',#4392,#4393);+#4392 = CARTESIAN_POINT('',(-3.15,2.6));+#4393 = VECTOR('',#4394,1.);+#4394 = DIRECTION('',(1.343618501151E-16,-1.));+#4395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4396 = PCURVE('',#4397,#4402);+#4397 = CYLINDRICAL_SURFACE('',#4398,0.25);+#4398 = AXIS2_PLACEMENT_3D('',#4399,#4400,#4401);+#4399 = CARTESIAN_POINT('',(-3.15,1.475,0.925));+#4400 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4401 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4402 = DEFINITIONAL_REPRESENTATION('',(#4403),#4407);+#4403 = LINE('',#4404,#4405);+#4404 = CARTESIAN_POINT('',(4.886921905584,0.));+#4405 = VECTOR('',#4406,1.);+#4406 = DIRECTION('',(0.,-1.));+#4407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4408 = ORIENTED_EDGE('',*,*,#4409,.T.);+#4409 = EDGE_CURVE('',#4382,#4410,#4412,.T.);+#4410 = VERTEX_POINT('',#4411);+#4411 = CARTESIAN_POINT('',(-2.65,1.775,1.175));+#4412 = SURFACE_CURVE('',#4413,(#4417,#4424),.PCURVE_S1.);+#4413 = LINE('',#4414,#4415);+#4414 = CARTESIAN_POINT('',(-3.15,1.775,1.175));+#4415 = VECTOR('',#4416,1.);+#4416 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4417 = PCURVE('',#2041,#4418);+#4418 = DEFINITIONAL_REPRESENTATION('',(#4419),#4423);+#4419 = LINE('',#4420,#4421);+#4420 = CARTESIAN_POINT('',(-3.15,2.3));+#4421 = VECTOR('',#4422,1.);+#4422 = DIRECTION('',(1.,1.343618501151E-16));+#4423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4424 = PCURVE('',#4425,#4430);+#4425 = PLANE('',#4426);+#4426 = AXIS2_PLACEMENT_3D('',#4427,#4428,#4429);+#4427 = CARTESIAN_POINT('',(-3.278710000798,1.775,0.659796909381));+#4428 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4429 = DIRECTION('',(0.,-0.,1.));+#4430 = DEFINITIONAL_REPRESENTATION('',(#4431),#4435);+#4431 = LINE('',#4432,#4433);+#4432 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4433 = VECTOR('',#4434,1.);+#4434 = DIRECTION('',(0.,1.));+#4435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4436 = ORIENTED_EDGE('',*,*,#4437,.T.);+#4437 = EDGE_CURVE('',#4410,#4438,#4440,.T.);+#4438 = VERTEX_POINT('',#4439);+#4439 = CARTESIAN_POINT('',(-2.65,2.125,1.175));+#4440 = SURFACE_CURVE('',#4441,(#4445,#4452),.PCURVE_S1.);+#4441 = LINE('',#4442,#4443);+#4442 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#4443 = VECTOR('',#4444,1.);+#4444 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4445 = PCURVE('',#2041,#4446);+#4446 = DEFINITIONAL_REPRESENTATION('',(#4447),#4451);+#4447 = LINE('',#4448,#4449);+#4448 = CARTESIAN_POINT('',(-2.65,7.975));+#4449 = VECTOR('',#4450,1.);+#4450 = DIRECTION('',(1.18971702004E-17,-1.));+#4451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4452 = PCURVE('',#446,#4453);+#4453 = DEFINITIONAL_REPRESENTATION('',(#4454),#4458);+#4454 = LINE('',#4455,#4456);+#4455 = CARTESIAN_POINT('',(0.,0.));+#4456 = VECTOR('',#4457,1.);+#4457 = DIRECTION('',(1.,0.));+#4458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4459 = ORIENTED_EDGE('',*,*,#4460,.F.);+#4460 = EDGE_CURVE('',#4461,#4438,#4463,.T.);+#4461 = VERTEX_POINT('',#4462);+#4462 = CARTESIAN_POINT('',(-3.15,2.125,1.175));+#4463 = SURFACE_CURVE('',#4464,(#4468,#4475),.PCURVE_S1.);+#4464 = LINE('',#4465,#4466);+#4465 = CARTESIAN_POINT('',(-3.15,2.125,1.175));+#4466 = VECTOR('',#4467,1.);+#4467 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4468 = PCURVE('',#2041,#4469);+#4469 = DEFINITIONAL_REPRESENTATION('',(#4470),#4474);+#4470 = LINE('',#4471,#4472);+#4471 = CARTESIAN_POINT('',(-3.15,1.95));+#4472 = VECTOR('',#4473,1.);+#4473 = DIRECTION('',(1.,1.343618501151E-16));+#4474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4475 = PCURVE('',#4476,#4481);+#4476 = PLANE('',#4477);+#4477 = AXIS2_PLACEMENT_3D('',#4478,#4479,#4480);+#4478 = CARTESIAN_POINT('',(-3.278710000798,2.125,0.659796909381));+#4479 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4480 = DIRECTION('',(0.,-0.,1.));+#4481 = DEFINITIONAL_REPRESENTATION('',(#4482),#4486);+#4482 = LINE('',#4483,#4484);+#4483 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4484 = VECTOR('',#4485,1.);+#4485 = DIRECTION('',(0.,1.));+#4486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4487 = ORIENTED_EDGE('',*,*,#4488,.T.);+#4488 = EDGE_CURVE('',#4461,#4489,#4491,.T.);+#4489 = VERTEX_POINT('',#4490);+#4490 = CARTESIAN_POINT('',(-3.15,2.425,1.175));+#4491 = SURFACE_CURVE('',#4492,(#4496,#4503),.PCURVE_S1.);+#4492 = LINE('',#4493,#4494);+#4493 = CARTESIAN_POINT('',(-3.15,2.125,1.175));+#4494 = VECTOR('',#4495,1.);+#4495 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4496 = PCURVE('',#2041,#4497);+#4497 = DEFINITIONAL_REPRESENTATION('',(#4498),#4502);+#4498 = LINE('',#4499,#4500);+#4499 = CARTESIAN_POINT('',(-3.15,1.95));+#4500 = VECTOR('',#4501,1.);+#4501 = DIRECTION('',(1.343618501151E-16,-1.));+#4502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4503 = PCURVE('',#4504,#4509);+#4504 = CYLINDRICAL_SURFACE('',#4505,0.25);+#4505 = AXIS2_PLACEMENT_3D('',#4506,#4507,#4508);+#4506 = CARTESIAN_POINT('',(-3.15,2.125,0.925));+#4507 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4508 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4509 = DEFINITIONAL_REPRESENTATION('',(#4510),#4514);+#4510 = LINE('',#4511,#4512);+#4511 = CARTESIAN_POINT('',(4.886921905584,0.));+#4512 = VECTOR('',#4513,1.);+#4513 = DIRECTION('',(0.,-1.));+#4514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4515 = ORIENTED_EDGE('',*,*,#4516,.T.);+#4516 = EDGE_CURVE('',#4489,#4517,#4519,.T.);+#4517 = VERTEX_POINT('',#4518);+#4518 = CARTESIAN_POINT('',(-2.65,2.425,1.175));+#4519 = SURFACE_CURVE('',#4520,(#4524,#4531),.PCURVE_S1.);+#4520 = LINE('',#4521,#4522);+#4521 = CARTESIAN_POINT('',(-3.15,2.425,1.175));+#4522 = VECTOR('',#4523,1.);+#4523 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4524 = PCURVE('',#2041,#4525);+#4525 = DEFINITIONAL_REPRESENTATION('',(#4526),#4530);+#4526 = LINE('',#4527,#4528);+#4527 = CARTESIAN_POINT('',(-3.15,1.65));+#4528 = VECTOR('',#4529,1.);+#4529 = DIRECTION('',(1.,1.343618501151E-16));+#4530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4531 = PCURVE('',#4532,#4537);+#4532 = PLANE('',#4533);+#4533 = AXIS2_PLACEMENT_3D('',#4534,#4535,#4536);+#4534 = CARTESIAN_POINT('',(-3.278710000798,2.425,0.659796909381));+#4535 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4536 = DIRECTION('',(0.,-0.,1.));+#4537 = DEFINITIONAL_REPRESENTATION('',(#4538),#4542);+#4538 = LINE('',#4539,#4540);+#4539 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4540 = VECTOR('',#4541,1.);+#4541 = DIRECTION('',(0.,1.));+#4542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4543 = ORIENTED_EDGE('',*,*,#4544,.T.);+#4544 = EDGE_CURVE('',#4517,#4545,#4547,.T.);+#4545 = VERTEX_POINT('',#4546);+#4546 = CARTESIAN_POINT('',(-2.65,2.775,1.175));+#4547 = SURFACE_CURVE('',#4548,(#4552,#4559),.PCURVE_S1.);+#4548 = LINE('',#4549,#4550);+#4549 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#4550 = VECTOR('',#4551,1.);+#4551 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4552 = PCURVE('',#2041,#4553);+#4553 = DEFINITIONAL_REPRESENTATION('',(#4554),#4558);+#4554 = LINE('',#4555,#4556);+#4555 = CARTESIAN_POINT('',(-2.65,7.975));+#4556 = VECTOR('',#4557,1.);+#4557 = DIRECTION('',(1.18971702004E-17,-1.));+#4558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4559 = PCURVE('',#390,#4560);+#4560 = DEFINITIONAL_REPRESENTATION('',(#4561),#4565);+#4561 = LINE('',#4562,#4563);+#4562 = CARTESIAN_POINT('',(0.,0.));+#4563 = VECTOR('',#4564,1.);+#4564 = DIRECTION('',(1.,0.));+#4565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4566 = ORIENTED_EDGE('',*,*,#4567,.F.);+#4567 = EDGE_CURVE('',#4568,#4545,#4570,.T.);+#4568 = VERTEX_POINT('',#4569);+#4569 = CARTESIAN_POINT('',(-3.15,2.775,1.175));+#4570 = SURFACE_CURVE('',#4571,(#4575,#4582),.PCURVE_S1.);+#4571 = LINE('',#4572,#4573);+#4572 = CARTESIAN_POINT('',(-3.15,2.775,1.175));+#4573 = VECTOR('',#4574,1.);+#4574 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4575 = PCURVE('',#2041,#4576);+#4576 = DEFINITIONAL_REPRESENTATION('',(#4577),#4581);+#4577 = LINE('',#4578,#4579);+#4578 = CARTESIAN_POINT('',(-3.15,1.3));+#4579 = VECTOR('',#4580,1.);+#4580 = DIRECTION('',(1.,1.343618501151E-16));+#4581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4582 = PCURVE('',#4583,#4588);+#4583 = PLANE('',#4584);+#4584 = AXIS2_PLACEMENT_3D('',#4585,#4586,#4587);+#4585 = CARTESIAN_POINT('',(-3.278710000798,2.775,0.659796909381));+#4586 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4587 = DIRECTION('',(0.,-0.,1.));+#4588 = DEFINITIONAL_REPRESENTATION('',(#4589),#4593);+#4589 = LINE('',#4590,#4591);+#4590 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4591 = VECTOR('',#4592,1.);+#4592 = DIRECTION('',(0.,1.));+#4593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4594 = ORIENTED_EDGE('',*,*,#4595,.T.);+#4595 = EDGE_CURVE('',#4568,#4596,#4598,.T.);+#4596 = VERTEX_POINT('',#4597);+#4597 = CARTESIAN_POINT('',(-3.15,3.075,1.175));+#4598 = SURFACE_CURVE('',#4599,(#4603,#4610),.PCURVE_S1.);+#4599 = LINE('',#4600,#4601);+#4600 = CARTESIAN_POINT('',(-3.15,2.775,1.175));+#4601 = VECTOR('',#4602,1.);+#4602 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4603 = PCURVE('',#2041,#4604);+#4604 = DEFINITIONAL_REPRESENTATION('',(#4605),#4609);+#4605 = LINE('',#4606,#4607);+#4606 = CARTESIAN_POINT('',(-3.15,1.3));+#4607 = VECTOR('',#4608,1.);+#4608 = DIRECTION('',(1.343618501151E-16,-1.));+#4609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4610 = PCURVE('',#4611,#4616);+#4611 = CYLINDRICAL_SURFACE('',#4612,0.25);+#4612 = AXIS2_PLACEMENT_3D('',#4613,#4614,#4615);+#4613 = CARTESIAN_POINT('',(-3.15,2.775,0.925));+#4614 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4615 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4616 = DEFINITIONAL_REPRESENTATION('',(#4617),#4621);+#4617 = LINE('',#4618,#4619);+#4618 = CARTESIAN_POINT('',(4.886921905584,0.));+#4619 = VECTOR('',#4620,1.);+#4620 = DIRECTION('',(0.,-1.));+#4621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4622 = ORIENTED_EDGE('',*,*,#4623,.T.);+#4623 = EDGE_CURVE('',#4596,#4624,#4626,.T.);+#4624 = VERTEX_POINT('',#4625);+#4625 = CARTESIAN_POINT('',(-2.65,3.075,1.175));+#4626 = SURFACE_CURVE('',#4627,(#4631,#4638),.PCURVE_S1.);+#4627 = LINE('',#4628,#4629);+#4628 = CARTESIAN_POINT('',(-3.15,3.075,1.175));+#4629 = VECTOR('',#4630,1.);+#4630 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4631 = PCURVE('',#2041,#4632);+#4632 = DEFINITIONAL_REPRESENTATION('',(#4633),#4637);+#4633 = LINE('',#4634,#4635);+#4634 = CARTESIAN_POINT('',(-3.15,1.));+#4635 = VECTOR('',#4636,1.);+#4636 = DIRECTION('',(1.,1.343618501151E-16));+#4637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4638 = PCURVE('',#4639,#4644);+#4639 = PLANE('',#4640);+#4640 = AXIS2_PLACEMENT_3D('',#4641,#4642,#4643);+#4641 = CARTESIAN_POINT('',(-3.278710000798,3.075,0.659796909381));+#4642 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4643 = DIRECTION('',(0.,-0.,1.));+#4644 = DEFINITIONAL_REPRESENTATION('',(#4645),#4649);+#4645 = LINE('',#4646,#4647);+#4646 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4647 = VECTOR('',#4648,1.);+#4648 = DIRECTION('',(0.,1.));+#4649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4650 = ORIENTED_EDGE('',*,*,#4651,.T.);+#4651 = EDGE_CURVE('',#4624,#4652,#4654,.T.);+#4652 = VERTEX_POINT('',#4653);+#4653 = CARTESIAN_POINT('',(-2.65,3.425,1.175));+#4654 = SURFACE_CURVE('',#4655,(#4659,#4666),.PCURVE_S1.);+#4655 = LINE('',#4656,#4657);+#4656 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#4657 = VECTOR('',#4658,1.);+#4658 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4659 = PCURVE('',#2041,#4660);+#4660 = DEFINITIONAL_REPRESENTATION('',(#4661),#4665);+#4661 = LINE('',#4662,#4663);+#4662 = CARTESIAN_POINT('',(-2.65,7.975));+#4663 = VECTOR('',#4664,1.);+#4664 = DIRECTION('',(1.18971702004E-17,-1.));+#4665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4666 = PCURVE('',#334,#4667);+#4667 = DEFINITIONAL_REPRESENTATION('',(#4668),#4672);+#4668 = LINE('',#4669,#4670);+#4669 = CARTESIAN_POINT('',(0.,0.));+#4670 = VECTOR('',#4671,1.);+#4671 = DIRECTION('',(1.,0.));+#4672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4673 = ORIENTED_EDGE('',*,*,#4674,.F.);+#4674 = EDGE_CURVE('',#4675,#4652,#4677,.T.);+#4675 = VERTEX_POINT('',#4676);+#4676 = CARTESIAN_POINT('',(-3.15,3.425,1.175));+#4677 = SURFACE_CURVE('',#4678,(#4682,#4689),.PCURVE_S1.);+#4678 = LINE('',#4679,#4680);+#4679 = CARTESIAN_POINT('',(-3.15,3.425,1.175));+#4680 = VECTOR('',#4681,1.);+#4681 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4682 = PCURVE('',#2041,#4683);+#4683 = DEFINITIONAL_REPRESENTATION('',(#4684),#4688);+#4684 = LINE('',#4685,#4686);+#4685 = CARTESIAN_POINT('',(-3.15,0.65));+#4686 = VECTOR('',#4687,1.);+#4687 = DIRECTION('',(1.,1.343618501151E-16));+#4688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4689 = PCURVE('',#4690,#4695);+#4690 = PLANE('',#4691);+#4691 = AXIS2_PLACEMENT_3D('',#4692,#4693,#4694);+#4692 = CARTESIAN_POINT('',(-3.278710000798,3.425,0.659796909381));+#4693 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4694 = DIRECTION('',(0.,-0.,1.));+#4695 = DEFINITIONAL_REPRESENTATION('',(#4696),#4700);+#4696 = LINE('',#4697,#4698);+#4697 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4698 = VECTOR('',#4699,1.);+#4699 = DIRECTION('',(0.,1.));+#4700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4701 = ORIENTED_EDGE('',*,*,#4702,.T.);+#4702 = EDGE_CURVE('',#4675,#4703,#4705,.T.);+#4703 = VERTEX_POINT('',#4704);+#4704 = CARTESIAN_POINT('',(-3.15,3.725,1.175));+#4705 = SURFACE_CURVE('',#4706,(#4710,#4717),.PCURVE_S1.);+#4706 = LINE('',#4707,#4708);+#4707 = CARTESIAN_POINT('',(-3.15,3.425,1.175));+#4708 = VECTOR('',#4709,1.);+#4709 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4710 = PCURVE('',#2041,#4711);+#4711 = DEFINITIONAL_REPRESENTATION('',(#4712),#4716);+#4712 = LINE('',#4713,#4714);+#4713 = CARTESIAN_POINT('',(-3.15,0.65));+#4714 = VECTOR('',#4715,1.);+#4715 = DIRECTION('',(1.343618501151E-16,-1.));+#4716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4717 = PCURVE('',#4718,#4723);+#4718 = CYLINDRICAL_SURFACE('',#4719,0.25);+#4719 = AXIS2_PLACEMENT_3D('',#4720,#4721,#4722);+#4720 = CARTESIAN_POINT('',(-3.15,3.425,0.925));+#4721 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4722 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4723 = DEFINITIONAL_REPRESENTATION('',(#4724),#4728);+#4724 = LINE('',#4725,#4726);+#4725 = CARTESIAN_POINT('',(4.886921905584,0.));+#4726 = VECTOR('',#4727,1.);+#4727 = DIRECTION('',(0.,-1.));+#4728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4729 = ORIENTED_EDGE('',*,*,#4730,.T.);+#4730 = EDGE_CURVE('',#4703,#4731,#4733,.T.);+#4731 = VERTEX_POINT('',#4732);+#4732 = CARTESIAN_POINT('',(-2.65,3.725,1.175));+#4733 = SURFACE_CURVE('',#4734,(#4738,#4745),.PCURVE_S1.);+#4734 = LINE('',#4735,#4736);+#4735 = CARTESIAN_POINT('',(-3.15,3.725,1.175));+#4736 = VECTOR('',#4737,1.);+#4737 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4738 = PCURVE('',#2041,#4739);+#4739 = DEFINITIONAL_REPRESENTATION('',(#4740),#4744);+#4740 = LINE('',#4741,#4742);+#4741 = CARTESIAN_POINT('',(-3.15,0.35));+#4742 = VECTOR('',#4743,1.);+#4743 = DIRECTION('',(1.,1.343618501151E-16));+#4744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4745 = PCURVE('',#4746,#4751);+#4746 = PLANE('',#4747);+#4747 = AXIS2_PLACEMENT_3D('',#4748,#4749,#4750);+#4748 = CARTESIAN_POINT('',(-3.278710000798,3.725,0.659796909381));+#4749 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4750 = DIRECTION('',(0.,-0.,1.));+#4751 = DEFINITIONAL_REPRESENTATION('',(#4752),#4756);+#4752 = LINE('',#4753,#4754);+#4753 = CARTESIAN_POINT('',(0.515203090619,0.128710000798));+#4754 = VECTOR('',#4755,1.);+#4755 = DIRECTION('',(0.,1.));+#4756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4757 = ORIENTED_EDGE('',*,*,#4758,.T.);+#4758 = EDGE_CURVE('',#4731,#2057,#4759,.T.);+#4759 = SURFACE_CURVE('',#4760,(#4764,#4771),.PCURVE_S1.);+#4760 = LINE('',#4761,#4762);+#4761 = CARTESIAN_POINT('',(-2.65,-3.9,1.175));+#4762 = VECTOR('',#4763,1.);+#4763 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4764 = PCURVE('',#2041,#4765);+#4765 = DEFINITIONAL_REPRESENTATION('',(#4766),#4770);+#4766 = LINE('',#4767,#4768);+#4767 = CARTESIAN_POINT('',(-2.65,7.975));+#4768 = VECTOR('',#4769,1.);+#4769 = DIRECTION('',(1.18971702004E-17,-1.));+#4770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4771 = PCURVE('',#278,#4772);+#4772 = DEFINITIONAL_REPRESENTATION('',(#4773),#4777);+#4773 = LINE('',#4774,#4775);+#4774 = CARTESIAN_POINT('',(0.,0.));+#4775 = VECTOR('',#4776,1.);+#4776 = DIRECTION('',(1.,0.));+#4777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4778 = FACE_BOUND('',#4779,.F.);+#4779 = EDGE_LOOP('',(#4780,#4810,#4838,#4866,#4894,#4922,#4950,#4978));+#4780 = ORIENTED_EDGE('',*,*,#4781,.F.);+#4781 = EDGE_CURVE('',#4782,#4784,#4786,.T.);+#4782 = VERTEX_POINT('',#4783);+#4783 = CARTESIAN_POINT('',(2.6,3.875,1.175));+#4784 = VERTEX_POINT('',#4785);+#4785 = CARTESIAN_POINT('',(2.6,-3.875,1.175));+#4786 = SURFACE_CURVE('',#4787,(#4791,#4798),.PCURVE_S1.);+#4787 = LINE('',#4788,#4789);+#4788 = CARTESIAN_POINT('',(2.6,3.875,1.175));+#4789 = VECTOR('',#4790,1.);+#4790 = DIRECTION('',(0.,-1.,0.));+#4791 = PCURVE('',#2041,#4792);+#4792 = DEFINITIONAL_REPRESENTATION('',(#4793),#4797);+#4793 = LINE('',#4794,#4795);+#4794 = CARTESIAN_POINT('',(2.6,0.2));+#4795 = VECTOR('',#4796,1.);+#4796 = DIRECTION('',(-1.229194726629E-16,1.));+#4797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4798 = PCURVE('',#4799,#4804);+#4799 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#4800,#4801)+ ,(#4802,#4803+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.75),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#4800 = CARTESIAN_POINT('',(2.6,3.875,1.175));+#4801 = CARTESIAN_POINT('',(2.403385180455,3.776692590228,2.1));+#4802 = CARTESIAN_POINT('',(2.6,-3.875,1.175));+#4803 = CARTESIAN_POINT('',(2.403385180455,-3.776692590228,2.1));+#4804 = DEFINITIONAL_REPRESENTATION('',(#4805),#4809);+#4805 = LINE('',#4806,#4807);+#4806 = CARTESIAN_POINT('',(-1.843578947392E-16,-1.489996136053E-17));+#4807 = VECTOR('',#4808,1.);+#4808 = DIRECTION('',(1.,-2.919039606834E-16));+#4809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4810 = ORIENTED_EDGE('',*,*,#4811,.F.);+#4811 = EDGE_CURVE('',#4812,#4782,#4814,.T.);+#4812 = VERTEX_POINT('',#4813);+#4813 = CARTESIAN_POINT('',(2.425,4.05,1.175));+#4814 = SURFACE_CURVE('',#4815,(#4819,#4826),.PCURVE_S1.);+#4815 = LINE('',#4816,#4817);+#4816 = CARTESIAN_POINT('',(2.425,4.05,1.175));+#4817 = VECTOR('',#4818,1.);+#4818 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#4819 = PCURVE('',#2041,#4820);+#4820 = DEFINITIONAL_REPRESENTATION('',(#4821),#4825);+#4821 = LINE('',#4822,#4823);+#4822 = CARTESIAN_POINT('',(2.425,2.5E-02));+#4823 = VECTOR('',#4824,1.);+#4824 = DIRECTION('',(0.707106781187,0.707106781187));+#4825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4826 = PCURVE('',#4827,#4832);+#4827 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#4828,#4829)+ ,(#4830,#4831+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#4828 = CARTESIAN_POINT('',(2.425,4.05,1.175));+#4829 = CARTESIAN_POINT('',(2.326692590228,3.853385180455,2.1));+#4830 = CARTESIAN_POINT('',(2.6,3.875,1.175));+#4831 = CARTESIAN_POINT('',(2.403385180455,3.776692590228,2.1));+#4832 = DEFINITIONAL_REPRESENTATION('',(#4833),#4837);+#4833 = LINE('',#4834,#4835);+#4834 = CARTESIAN_POINT('',(1.346110627549E-16,1.304737193914E-16));+#4835 = VECTOR('',#4836,1.);+#4836 = DIRECTION('',(1.,-3.343407592827E-16));+#4837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4838 = ORIENTED_EDGE('',*,*,#4839,.F.);+#4839 = EDGE_CURVE('',#4840,#4812,#4842,.T.);+#4840 = VERTEX_POINT('',#4841);+#4841 = CARTESIAN_POINT('',(-2.425,4.05,1.175));+#4842 = SURFACE_CURVE('',#4843,(#4847,#4854),.PCURVE_S1.);+#4843 = LINE('',#4844,#4845);+#4844 = CARTESIAN_POINT('',(-2.425,4.05,1.175));+#4845 = VECTOR('',#4846,1.);+#4846 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4847 = PCURVE('',#2041,#4848);+#4848 = DEFINITIONAL_REPRESENTATION('',(#4849),#4853);+#4849 = LINE('',#4850,#4851);+#4850 = CARTESIAN_POINT('',(-2.425,2.5E-02));+#4851 = VECTOR('',#4852,1.);+#4852 = DIRECTION('',(1.,1.18971702004E-17));+#4853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4854 = PCURVE('',#4855,#4860);+#4855 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#4856,#4857)+ ,(#4858,#4859+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.85),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#4856 = CARTESIAN_POINT('',(-2.425,4.05,1.175));+#4857 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#4858 = CARTESIAN_POINT('',(2.425,4.05,1.175));+#4859 = CARTESIAN_POINT('',(2.326692590228,3.853385180455,2.1));+#4860 = DEFINITIONAL_REPRESENTATION('',(#4861),#4865);+#4861 = LINE('',#4862,#4863);+#4862 = CARTESIAN_POINT('',(6.518498746691E-16,-9.232775095794E-17));+#4863 = VECTOR('',#4864,1.);+#4864 = DIRECTION('',(1.,-3.317384378592E-17));+#4865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4866 = ORIENTED_EDGE('',*,*,#4867,.F.);+#4867 = EDGE_CURVE('',#4868,#4840,#4870,.T.);+#4868 = VERTEX_POINT('',#4869);+#4869 = CARTESIAN_POINT('',(-2.6,3.875,1.175));+#4870 = SURFACE_CURVE('',#4871,(#4875,#4882),.PCURVE_S1.);+#4871 = LINE('',#4872,#4873);+#4872 = CARTESIAN_POINT('',(-2.6,3.875,1.175));+#4873 = VECTOR('',#4874,1.);+#4874 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#4875 = PCURVE('',#2041,#4876);+#4876 = DEFINITIONAL_REPRESENTATION('',(#4877),#4881);+#4877 = LINE('',#4878,#4879);+#4878 = CARTESIAN_POINT('',(-2.6,0.2));+#4879 = VECTOR('',#4880,1.);+#4880 = DIRECTION('',(0.707106781187,-0.707106781187));+#4881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4882 = PCURVE('',#4883,#4888);+#4883 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#4884,#4885)+ ,(#4886,#4887+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#4884 = CARTESIAN_POINT('',(-2.6,3.875,1.175));+#4885 = CARTESIAN_POINT('',(-2.403385180455,3.776692590228,2.1));+#4886 = CARTESIAN_POINT('',(-2.425,4.05,1.175));+#4887 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#4888 = DEFINITIONAL_REPRESENTATION('',(#4889),#4893);+#4889 = LINE('',#4890,#4891);+#4890 = CARTESIAN_POINT('',(1.347939532269E-16,1.305168473478E-16));+#4891 = VECTOR('',#4892,1.);+#4892 = DIRECTION('',(1.,-1.74263677255E-19));+#4893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4894 = ORIENTED_EDGE('',*,*,#4895,.F.);+#4895 = EDGE_CURVE('',#4896,#4868,#4898,.T.);+#4896 = VERTEX_POINT('',#4897);+#4897 = CARTESIAN_POINT('',(-2.6,-3.875,1.175));+#4898 = SURFACE_CURVE('',#4899,(#4903,#4910),.PCURVE_S1.);+#4899 = LINE('',#4900,#4901);+#4900 = CARTESIAN_POINT('',(-2.6,-3.875,1.175));+#4901 = VECTOR('',#4902,1.);+#4902 = DIRECTION('',(0.,1.,0.));+#4903 = PCURVE('',#2041,#4904);+#4904 = DEFINITIONAL_REPRESENTATION('',(#4905),#4909);+#4905 = LINE('',#4906,#4907);+#4906 = CARTESIAN_POINT('',(-2.6,7.95));+#4907 = VECTOR('',#4908,1.);+#4908 = DIRECTION('',(1.229194726629E-16,-1.));+#4909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4910 = PCURVE('',#4911,#4916);+#4911 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#4912,#4913)+ ,(#4914,#4915+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.75),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#4912 = CARTESIAN_POINT('',(-2.6,-3.875,1.175));+#4913 = CARTESIAN_POINT('',(-2.403385180455,-3.776692590228,2.1));+#4914 = CARTESIAN_POINT('',(-2.6,3.875,1.175));+#4915 = CARTESIAN_POINT('',(-2.403385180455,3.776692590228,2.1));+#4916 = DEFINITIONAL_REPRESENTATION('',(#4917),#4921);+#4917 = LINE('',#4918,#4919);+#4918 = CARTESIAN_POINT('',(-1.843578947392E-16,-1.489996136053E-17));+#4919 = VECTOR('',#4920,1.);+#4920 = DIRECTION('',(1.,-2.919039606834E-16));+#4921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4922 = ORIENTED_EDGE('',*,*,#4923,.F.);+#4923 = EDGE_CURVE('',#4924,#4896,#4926,.T.);+#4924 = VERTEX_POINT('',#4925);+#4925 = CARTESIAN_POINT('',(-2.425,-4.05,1.175));+#4926 = SURFACE_CURVE('',#4927,(#4931,#4938),.PCURVE_S1.);+#4927 = LINE('',#4928,#4929);+#4928 = CARTESIAN_POINT('',(-2.425,-4.05,1.175));+#4929 = VECTOR('',#4930,1.);+#4930 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#4931 = PCURVE('',#2041,#4932);+#4932 = DEFINITIONAL_REPRESENTATION('',(#4933),#4937);+#4933 = LINE('',#4934,#4935);+#4934 = CARTESIAN_POINT('',(-2.425,8.125));+#4935 = VECTOR('',#4936,1.);+#4936 = DIRECTION('',(-0.707106781187,-0.707106781187));+#4937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4938 = PCURVE('',#4939,#4944);+#4939 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#4940,#4941)+ ,(#4942,#4943+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#4940 = CARTESIAN_POINT('',(-2.425,-4.05,1.175));+#4941 = CARTESIAN_POINT('',(-2.326692590228,-3.853385180455,2.1));+#4942 = CARTESIAN_POINT('',(-2.6,-3.875,1.175));+#4943 = CARTESIAN_POINT('',(-2.403385180455,-3.776692590228,2.1));+#4944 = DEFINITIONAL_REPRESENTATION('',(#4945),#4949);+#4945 = LINE('',#4946,#4947);+#4946 = CARTESIAN_POINT('',(1.346110627549E-16,1.304737193914E-16));+#4947 = VECTOR('',#4948,1.);+#4948 = DIRECTION('',(1.,-3.343407592827E-16));+#4949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4950 = ORIENTED_EDGE('',*,*,#4951,.F.);+#4951 = EDGE_CURVE('',#4952,#4924,#4954,.T.);+#4952 = VERTEX_POINT('',#4953);+#4953 = CARTESIAN_POINT('',(2.425,-4.05,1.175));+#4954 = SURFACE_CURVE('',#4955,(#4959,#4966),.PCURVE_S1.);+#4955 = LINE('',#4956,#4957);+#4956 = CARTESIAN_POINT('',(2.425,-4.05,1.175));+#4957 = VECTOR('',#4958,1.);+#4958 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4959 = PCURVE('',#2041,#4960);+#4960 = DEFINITIONAL_REPRESENTATION('',(#4961),#4965);+#4961 = LINE('',#4962,#4963);+#4962 = CARTESIAN_POINT('',(2.425,8.125));+#4963 = VECTOR('',#4964,1.);+#4964 = DIRECTION('',(-1.,-1.18971702004E-17));+#4965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4966 = PCURVE('',#4967,#4972);+#4967 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#4968,#4969)+ ,(#4970,#4971+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.85),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#4968 = CARTESIAN_POINT('',(2.425,-4.05,1.175));+#4969 = CARTESIAN_POINT('',(2.326692590228,-3.853385180455,2.1));+#4970 = CARTESIAN_POINT('',(-2.425,-4.05,1.175));+#4971 = CARTESIAN_POINT('',(-2.326692590228,-3.853385180455,2.1));+#4972 = DEFINITIONAL_REPRESENTATION('',(#4973),#4977);+#4973 = LINE('',#4974,#4975);+#4974 = CARTESIAN_POINT('',(6.518498746691E-16,-9.232775095794E-17));+#4975 = VECTOR('',#4976,1.);+#4976 = DIRECTION('',(1.,-3.317384378592E-17));+#4977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4978 = ORIENTED_EDGE('',*,*,#4979,.F.);+#4979 = EDGE_CURVE('',#4784,#4952,#4980,.T.);+#4980 = SURFACE_CURVE('',#4981,(#4985,#4992),.PCURVE_S1.);+#4981 = LINE('',#4982,#4983);+#4982 = CARTESIAN_POINT('',(2.6,-3.875,1.175));+#4983 = VECTOR('',#4984,1.);+#4984 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#4985 = PCURVE('',#2041,#4986);+#4986 = DEFINITIONAL_REPRESENTATION('',(#4987),#4991);+#4987 = LINE('',#4988,#4989);+#4988 = CARTESIAN_POINT('',(2.6,7.95));+#4989 = VECTOR('',#4990,1.);+#4990 = DIRECTION('',(-0.707106781187,0.707106781187));+#4991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4992 = PCURVE('',#4993,#4998);+#4993 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#4994,#4995)+ ,(#4996,#4997+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#4994 = CARTESIAN_POINT('',(2.6,-3.875,1.175));+#4995 = CARTESIAN_POINT('',(2.403385180455,-3.776692590228,2.1));+#4996 = CARTESIAN_POINT('',(2.425,-4.05,1.175));+#4997 = CARTESIAN_POINT('',(2.326692590228,-3.853385180455,2.1));+#4998 = DEFINITIONAL_REPRESENTATION('',(#4999),#5003);+#4999 = LINE('',#5000,#5001);+#5000 = CARTESIAN_POINT('',(1.347939532269E-16,1.305168473478E-16));+#5001 = VECTOR('',#5002,1.);+#5002 = DIRECTION('',(1.,-1.74263677255E-19));+#5003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5004 = ADVANCED_FACE('',(#5005),#4993,.F.);+#5005 = FACE_BOUND('',#5006,.F.);+#5006 = EDGE_LOOP('',(#5007,#5008,#5030,#5057));+#5007 = ORIENTED_EDGE('',*,*,#4979,.T.);+#5008 = ORIENTED_EDGE('',*,*,#5009,.T.);+#5009 = EDGE_CURVE('',#4952,#5010,#5012,.T.);+#5010 = VERTEX_POINT('',#5011);+#5011 = CARTESIAN_POINT('',(2.326692590228,-3.853385180455,2.1));+#5012 = SURFACE_CURVE('',#5013,(#5016,#5023),.PCURVE_S1.);+#5013 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5014,#5015),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5014 = CARTESIAN_POINT('',(2.425,-4.05,1.175));+#5015 = CARTESIAN_POINT('',(2.326692590228,-3.853385180455,2.1));+#5016 = PCURVE('',#4993,#5017);+#5017 = DEFINITIONAL_REPRESENTATION('',(#5018),#5022);+#5018 = LINE('',#5019,#5020);+#5019 = CARTESIAN_POINT('',(0.247487373415,-1.707972880965E-16));+#5020 = VECTOR('',#5021,1.);+#5021 = DIRECTION('',(-1.304512053935E-15,1.));+#5022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5023 = PCURVE('',#4967,#5024);+#5024 = DEFINITIONAL_REPRESENTATION('',(#5025),#5029);+#5025 = LINE('',#5026,#5027);+#5026 = CARTESIAN_POINT('',(6.518498746691E-16,-9.232775095794E-17));+#5027 = VECTOR('',#5028,1.);+#5028 = DIRECTION('',(-3.266806645289E-16,1.));+#5029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5030 = ORIENTED_EDGE('',*,*,#5031,.F.);+#5031 = EDGE_CURVE('',#5032,#5010,#5034,.T.);+#5032 = VERTEX_POINT('',#5033);+#5033 = CARTESIAN_POINT('',(2.403385180455,-3.776692590228,2.1));+#5034 = SURFACE_CURVE('',#5035,(#5039,#5045),.PCURVE_S1.);+#5035 = LINE('',#5036,#5037);+#5036 = CARTESIAN_POINT('',(2.403385180455,-3.776692590228,2.1));+#5037 = VECTOR('',#5038,1.);+#5038 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#5039 = PCURVE('',#4993,#5040);+#5040 = DEFINITIONAL_REPRESENTATION('',(#5041),#5044);+#5041 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5042,#5043),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.108459701233),.PIECEWISE_BEZIER_KNOTS.);+#5042 = CARTESIAN_POINT('',(5.30852437418E-16,1.));+#5043 = CARTESIAN_POINT('',(0.247487373415,1.));+#5044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5045 = PCURVE('',#5046,#5051);+#5046 = PLANE('',#5047);+#5047 = AXIS2_PLACEMENT_3D('',#5048,#5049,#5050);+#5048 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#5049 = DIRECTION('',(0.,0.,1.));+#5050 = DIRECTION('',(0.51688870171,-0.856052609391,0.));+#5051 = DEFINITIONAL_REPRESENTATION('',(#5052),#5056);+#5052 = LINE('',#5053,#5054);+#5053 = CARTESIAN_POINT('',(8.976671743322,0.105294425381));+#5054 = VECTOR('',#5055,1.);+#5055 = DIRECTION('',(0.239825099055,-0.97081611125));+#5056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5057 = ORIENTED_EDGE('',*,*,#5058,.F.);+#5058 = EDGE_CURVE('',#4784,#5032,#5059,.T.);+#5059 = SURFACE_CURVE('',#5060,(#5063,#5070),.PCURVE_S1.);+#5060 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5061,#5062),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5061 = CARTESIAN_POINT('',(2.6,-3.875,1.175));+#5062 = CARTESIAN_POINT('',(2.403385180455,-3.776692590228,2.1));+#5063 = PCURVE('',#4993,#5064);+#5064 = DEFINITIONAL_REPRESENTATION('',(#5065),#5069);+#5065 = LINE('',#5066,#5067);+#5066 = CARTESIAN_POINT('',(1.347939532269E-16,1.305168473478E-16));+#5067 = VECTOR('',#5068,1.);+#5068 = DIRECTION('',(3.960584841911E-16,1.));+#5069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5070 = PCURVE('',#4799,#5071);+#5071 = DEFINITIONAL_REPRESENTATION('',(#5072),#5076);+#5072 = LINE('',#5073,#5074);+#5073 = CARTESIAN_POINT('',(7.75,-4.394765391371E-17));+#5074 = VECTOR('',#5075,1.);+#5075 = DIRECTION('',(0.,1.));+#5076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5077 = ADVANCED_FACE('',(#5078,#5233,#5451,#5849,#6511,#7173,#7472,+ #8212,#8484,#8756),#5046,.T.);+#5078 = FACE_BOUND('',#5079,.T.);+#5079 = EDGE_LOOP('',(#5080,#5104,#5126,#5148,#5170,#5190,#5191,#5213));+#5080 = ORIENTED_EDGE('',*,*,#5081,.F.);+#5081 = EDGE_CURVE('',#5082,#5084,#5086,.T.);+#5082 = VERTEX_POINT('',#5083);+#5083 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#5084 = VERTEX_POINT('',#5085);+#5085 = CARTESIAN_POINT('',(2.326692590228,3.853385180455,2.1));+#5086 = SURFACE_CURVE('',#5087,(#5091,#5098),.PCURVE_S1.);+#5087 = LINE('',#5088,#5089);+#5088 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#5089 = VECTOR('',#5090,1.);+#5090 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5091 = PCURVE('',#5046,#5092);+#5092 = DEFINITIONAL_REPRESENTATION('',(#5093),#5097);+#5093 = LINE('',#5094,#5095);+#5094 = CARTESIAN_POINT('',(0.,0.));+#5095 = VECTOR('',#5096,1.);+#5096 = DIRECTION('',(0.51688870171,0.856052609391));+#5097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5098 = PCURVE('',#4855,#5099);+#5099 = DEFINITIONAL_REPRESENTATION('',(#5100),#5103);+#5100 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5101,#5102),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.653385180456),.PIECEWISE_BEZIER_KNOTS.);+#5101 = CARTESIAN_POINT('',(3.351731433192E-16,1.));+#5102 = CARTESIAN_POINT('',(4.85,1.));+#5103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5104 = ORIENTED_EDGE('',*,*,#5105,.F.);+#5105 = EDGE_CURVE('',#5106,#5082,#5108,.T.);+#5106 = VERTEX_POINT('',#5107);+#5107 = CARTESIAN_POINT('',(-2.403385180455,3.776692590228,2.1));+#5108 = SURFACE_CURVE('',#5109,(#5113,#5120),.PCURVE_S1.);+#5109 = LINE('',#5110,#5111);+#5110 = CARTESIAN_POINT('',(-2.403385180455,3.776692590228,2.1));+#5111 = VECTOR('',#5112,1.);+#5112 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#5113 = PCURVE('',#5046,#5114);+#5114 = DEFINITIONAL_REPRESENTATION('',(#5115),#5119);+#5115 = LINE('',#5116,#5117);+#5116 = CARTESIAN_POINT('',(2.601135859156E-02,-0.105294425378));+#5117 = VECTOR('',#5118,1.);+#5118 = DIRECTION('',(-0.239825099055,0.97081611125));+#5119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5120 = PCURVE('',#4883,#5121);+#5121 = DEFINITIONAL_REPRESENTATION('',(#5122),#5125);+#5122 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5123,#5124),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.108459701233),.PIECEWISE_BEZIER_KNOTS.);+#5123 = CARTESIAN_POINT('',(5.30852437418E-16,1.));+#5124 = CARTESIAN_POINT('',(0.247487373415,1.));+#5125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5126 = ORIENTED_EDGE('',*,*,#5127,.F.);+#5127 = EDGE_CURVE('',#5128,#5106,#5130,.T.);+#5128 = VERTEX_POINT('',#5129);+#5129 = CARTESIAN_POINT('',(-2.403385180455,-3.776692590228,2.1));+#5130 = SURFACE_CURVE('',#5131,(#5135,#5142),.PCURVE_S1.);+#5131 = LINE('',#5132,#5133);+#5132 = CARTESIAN_POINT('',(-2.403385180455,-3.776692590228,2.1));+#5133 = VECTOR('',#5134,1.);+#5134 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5135 = PCURVE('',#5046,#5136);+#5136 = DEFINITIONAL_REPRESENTATION('',(#5137),#5141);+#5137 = LINE('',#5138,#5139);+#5138 = CARTESIAN_POINT('',(6.492106452054,-4.009553884818));+#5139 = VECTOR('',#5140,1.);+#5140 = DIRECTION('',(-0.856052609391,0.51688870171));+#5141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5142 = PCURVE('',#4911,#5143);+#5143 = DEFINITIONAL_REPRESENTATION('',(#5144),#5147);+#5144 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5145,#5146),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,7.553385180456),.PIECEWISE_BEZIER_KNOTS.);+#5145 = CARTESIAN_POINT('',(-3.054339844588E-16,1.));+#5146 = CARTESIAN_POINT('',(7.75,1.));+#5147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5148 = ORIENTED_EDGE('',*,*,#5149,.F.);+#5149 = EDGE_CURVE('',#5150,#5128,#5152,.T.);+#5150 = VERTEX_POINT('',#5151);+#5151 = CARTESIAN_POINT('',(-2.326692590228,-3.853385180455,2.1));+#5152 = SURFACE_CURVE('',#5153,(#5157,#5164),.PCURVE_S1.);+#5153 = LINE('',#5154,#5155);+#5154 = CARTESIAN_POINT('',(-2.326692590228,-3.853385180455,2.1));+#5155 = VECTOR('',#5156,1.);+#5156 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#5157 = PCURVE('',#5046,#5158);+#5158 = DEFINITIONAL_REPRESENTATION('',(#5159),#5163);+#5159 = LINE('',#5160,#5161);+#5160 = CARTESIAN_POINT('',(6.597400877432,-3.983542526227));+#5161 = VECTOR('',#5162,1.);+#5162 = DIRECTION('',(-0.97081611125,-0.239825099055));+#5163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5164 = PCURVE('',#4939,#5165);+#5165 = DEFINITIONAL_REPRESENTATION('',(#5166),#5169);+#5166 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5167,#5168),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.108459701233),.PIECEWISE_BEZIER_KNOTS.);+#5167 = CARTESIAN_POINT('',(5.314250366534E-16,1.));+#5168 = CARTESIAN_POINT('',(0.247487373415,1.));+#5169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5170 = ORIENTED_EDGE('',*,*,#5171,.F.);+#5171 = EDGE_CURVE('',#5010,#5150,#5172,.T.);+#5172 = SURFACE_CURVE('',#5173,(#5177,#5184),.PCURVE_S1.);+#5173 = LINE('',#5174,#5175);+#5174 = CARTESIAN_POINT('',(2.326692590228,-3.853385180455,2.1));+#5175 = VECTOR('',#5176,1.);+#5176 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5177 = PCURVE('',#5046,#5178);+#5178 = DEFINITIONAL_REPRESENTATION('',(#5179),#5183);+#5179 = LINE('',#5180,#5181);+#5180 = CARTESIAN_POINT('',(9.002683101914,2.889688488494E-12));+#5181 = VECTOR('',#5182,1.);+#5182 = DIRECTION('',(-0.51688870171,-0.856052609391));+#5183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5184 = PCURVE('',#4967,#5185);+#5185 = DEFINITIONAL_REPRESENTATION('',(#5186),#5189);+#5186 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5187,#5188),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.653385180456),.PIECEWISE_BEZIER_KNOTS.);+#5187 = CARTESIAN_POINT('',(3.351731433192E-16,1.));+#5188 = CARTESIAN_POINT('',(4.85,1.));+#5189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5190 = ORIENTED_EDGE('',*,*,#5031,.F.);+#5191 = ORIENTED_EDGE('',*,*,#5192,.F.);+#5192 = EDGE_CURVE('',#5193,#5032,#5195,.T.);+#5193 = VERTEX_POINT('',#5194);+#5194 = CARTESIAN_POINT('',(2.403385180455,3.776692590228,2.1));+#5195 = SURFACE_CURVE('',#5196,(#5200,#5207),.PCURVE_S1.);+#5196 = LINE('',#5197,#5198);+#5197 = CARTESIAN_POINT('',(2.403385180455,3.776692590228,2.1));+#5198 = VECTOR('',#5199,1.);+#5199 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5200 = PCURVE('',#5046,#5201);+#5201 = DEFINITIONAL_REPRESENTATION('',(#5202),#5206);+#5202 = LINE('',#5203,#5204);+#5203 = CARTESIAN_POINT('',(2.51057664986,4.009553884821));+#5204 = VECTOR('',#5205,1.);+#5205 = DIRECTION('',(0.856052609391,-0.51688870171));+#5206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5207 = PCURVE('',#4799,#5208);+#5208 = DEFINITIONAL_REPRESENTATION('',(#5209),#5212);+#5209 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5210,#5211),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,7.553385180456),.PIECEWISE_BEZIER_KNOTS.);+#5210 = CARTESIAN_POINT('',(-3.054339844588E-16,1.));+#5211 = CARTESIAN_POINT('',(7.75,1.));+#5212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5213 = ORIENTED_EDGE('',*,*,#5214,.F.);+#5214 = EDGE_CURVE('',#5084,#5193,#5215,.T.);+#5215 = SURFACE_CURVE('',#5216,(#5220,#5227),.PCURVE_S1.);+#5216 = LINE('',#5217,#5218);+#5217 = CARTESIAN_POINT('',(2.326692590228,3.853385180455,2.1));+#5218 = VECTOR('',#5219,1.);+#5219 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#5220 = PCURVE('',#5046,#5221);+#5221 = DEFINITIONAL_REPRESENTATION('',(#5222),#5226);+#5222 = LINE('',#5223,#5224);+#5223 = CARTESIAN_POINT('',(2.405282224482,3.98354252623));+#5224 = VECTOR('',#5225,1.);+#5225 = DIRECTION('',(0.97081611125,0.239825099055));+#5226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5227 = PCURVE('',#4827,#5228);+#5228 = DEFINITIONAL_REPRESENTATION('',(#5229),#5232);+#5229 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5230,#5231),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.108459701233),.PIECEWISE_BEZIER_KNOTS.);+#5230 = CARTESIAN_POINT('',(5.314250366534E-16,1.));+#5231 = CARTESIAN_POINT('',(0.247487373415,1.));+#5232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5233 = FACE_BOUND('',#5234,.T.);+#5234 = EDGE_LOOP('',(#5235,#5264,#5291,#5318,#5345,#5372,#5399,#5426));+#5235 = ORIENTED_EDGE('',*,*,#5236,.T.);+#5236 = EDGE_CURVE('',#5237,#5239,#5241,.T.);+#5237 = VERTEX_POINT('',#5238);+#5238 = CARTESIAN_POINT('',(-1.203029108137,0.146777918012,2.1));+#5239 = VERTEX_POINT('',#5240);+#5240 = CARTESIAN_POINT('',(-1.315144488507,0.146777918012,2.1));+#5241 = SURFACE_CURVE('',#5242,(#5246,#5253),.PCURVE_S1.);+#5242 = LINE('',#5243,#5244);+#5243 = CARTESIAN_POINT('',(-1.764860849182,0.146777918012,2.1));+#5244 = VECTOR('',#5245,1.);+#5245 = DIRECTION('',(-1.,0.,0.));+#5246 = PCURVE('',#5046,#5247);+#5247 = DEFINITIONAL_REPRESENTATION('',(#5248),#5252);+#5248 = LINE('',#5249,#5250);+#5249 = CARTESIAN_POINT('',(3.463455298209,-1.434945887672));+#5250 = VECTOR('',#5251,1.);+#5251 = DIRECTION('',(-0.51688870171,-0.856052609391));+#5252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5253 = PCURVE('',#5254,#5259);+#5254 = PLANE('',#5255);+#5255 = AXIS2_PLACEMENT_3D('',#5256,#5257,#5258);+#5256 = CARTESIAN_POINT('',(-1.203029108137,0.146777918012,2.1500001));+#5257 = DIRECTION('',(0.,1.,0.));+#5258 = DIRECTION('',(-1.,0.,0.));+#5259 = DEFINITIONAL_REPRESENTATION('',(#5260),#5263);+#5260 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5261,#5262),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.561831741046,-0.449716360675),.PIECEWISE_BEZIER_KNOTS.);+#5261 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5262 = CARTESIAN_POINT('',(0.112115380371,-5.00001E-02));+#5263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5264 = ORIENTED_EDGE('',*,*,#5265,.T.);+#5265 = EDGE_CURVE('',#5239,#5266,#5268,.T.);+#5266 = VERTEX_POINT('',#5267);+#5267 = CARTESIAN_POINT('',(-1.315144488507,0.187416755247,2.1));+#5268 = SURFACE_CURVE('',#5269,(#5273,#5280),.PCURVE_S1.);+#5269 = LINE('',#5270,#5271);+#5270 = CARTESIAN_POINT('',(-1.315144488507,2.000081549234,2.1));+#5271 = VECTOR('',#5272,1.);+#5272 = DIRECTION('',(0.,1.,0.));+#5273 = PCURVE('',#5046,#5274);+#5274 = DEFINITIONAL_REPRESENTATION('',(#5275),#5279);+#5275 = LINE('',#5276,#5277);+#5276 = CARTESIAN_POINT('',(2.109383194516,-9.201331581399E-02));+#5277 = VECTOR('',#5278,1.);+#5278 = DIRECTION('',(-0.856052609391,0.51688870171));+#5279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5280 = PCURVE('',#5281,#5286);+#5281 = PLANE('',#5282);+#5282 = AXIS2_PLACEMENT_3D('',#5283,#5284,#5285);+#5283 = CARTESIAN_POINT('',(-1.315144488507,0.146777918012,2.1500001));+#5284 = DIRECTION('',(1.,0.,0.));+#5285 = DIRECTION('',(0.,1.,0.));+#5286 = DEFINITIONAL_REPRESENTATION('',(#5287),#5290);+#5287 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5288,#5289),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.853303631221,-1.812664793987),.PIECEWISE_BEZIER_KNOTS.);+#5288 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5289 = CARTESIAN_POINT('',(4.063883723462E-02,-5.00001E-02));+#5290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5291 = ORIENTED_EDGE('',*,*,#5292,.T.);+#5292 = EDGE_CURVE('',#5266,#5293,#5295,.T.);+#5293 = VERTEX_POINT('',#5294);+#5294 = CARTESIAN_POINT('',(-1.042864279035,0.187416755247,2.1));+#5295 = SURFACE_CURVE('',#5296,(#5300,#5307),.PCURVE_S1.);+#5296 = LINE('',#5297,#5298);+#5297 = CARTESIAN_POINT('',(-1.820918539368,0.187416755247,2.1));+#5298 = VECTOR('',#5299,1.);+#5299 = DIRECTION('',(1.,0.,-0.));+#5300 = PCURVE('',#5046,#5301);+#5301 = DEFINITIONAL_REPRESENTATION('',(#5302),#5306);+#5302 = LINE('',#5303,#5304);+#5303 = CARTESIAN_POINT('',(3.399690728851,-1.461928463814));+#5304 = VECTOR('',#5305,1.);+#5305 = DIRECTION('',(0.51688870171,0.856052609391));+#5306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5307 = PCURVE('',#5308,#5313);+#5308 = PLANE('',#5309);+#5309 = AXIS2_PLACEMENT_3D('',#5310,#5311,#5312);+#5310 = CARTESIAN_POINT('',(-1.315144488507,0.187416755247,2.1500001));+#5311 = DIRECTION('',(0.,-1.,0.));+#5312 = DIRECTION('',(1.,0.,0.));+#5313 = DEFINITIONAL_REPRESENTATION('',(#5314),#5317);+#5314 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5315,#5316),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.50577405086,0.778054260332),.PIECEWISE_BEZIER_KNOTS.);+#5315 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5316 = CARTESIAN_POINT('',(0.272280209472,-5.00001E-02));+#5317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5318 = ORIENTED_EDGE('',*,*,#5319,.T.);+#5319 = EDGE_CURVE('',#5293,#5320,#5322,.T.);+#5320 = VERTEX_POINT('',#5321);+#5321 = CARTESIAN_POINT('',(-1.042864279035,0.146777918012,2.1));+#5322 = SURFACE_CURVE('',#5323,(#5327,#5334),.PCURVE_S1.);+#5323 = LINE('',#5324,#5325);+#5324 = CARTESIAN_POINT('',(-1.042864279035,2.020400967851,2.1));+#5325 = VECTOR('',#5326,1.);+#5326 = DIRECTION('',(0.,-1.,0.));+#5327 = PCURVE('',#5046,#5328);+#5328 = DEFINITIONAL_REPRESENTATION('',(#5329),#5333);+#5329 = LINE('',#5330,#5331);+#5330 = CARTESIAN_POINT('',(2.232727267163,0.151575745899));+#5331 = VECTOR('',#5332,1.);+#5332 = DIRECTION('',(0.856052609391,-0.51688870171));+#5333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5334 = PCURVE('',#5335,#5340);+#5335 = PLANE('',#5336);+#5336 = AXIS2_PLACEMENT_3D('',#5337,#5338,#5339);+#5337 = CARTESIAN_POINT('',(-1.042864279035,0.187416755247,2.1500001));+#5338 = DIRECTION('',(-1.,0.,0.));+#5339 = DIRECTION('',(0.,-1.,0.));+#5340 = DEFINITIONAL_REPRESENTATION('',(#5341),#5344);+#5341 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5342,#5343),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.832984212604,1.873623049839),.PIECEWISE_BEZIER_KNOTS.);+#5342 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5343 = CARTESIAN_POINT('',(4.063883723462E-02,-5.00001E-02));+#5344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5345 = ORIENTED_EDGE('',*,*,#5346,.T.);+#5346 = EDGE_CURVE('',#5320,#5347,#5349,.T.);+#5347 = VERTEX_POINT('',#5348);+#5348 = CARTESIAN_POINT('',(-1.154501555439,0.146777918012,2.1));+#5349 = SURFACE_CURVE('',#5350,(#5354,#5361),.PCURVE_S1.);+#5350 = LINE('',#5351,#5352);+#5351 = CARTESIAN_POINT('',(-1.684778434632,0.146777918012,2.1));+#5352 = VECTOR('',#5353,1.);+#5353 = DIRECTION('',(-1.,0.,0.));+#5354 = PCURVE('',#5046,#5355);+#5355 = DEFINITIONAL_REPRESENTATION('',(#5356),#5360);+#5356 = LINE('',#5357,#5358);+#5357 = CARTESIAN_POINT('',(3.504848993496,-1.366391127729));+#5358 = VECTOR('',#5359,1.);+#5359 = DIRECTION('',(-0.51688870171,-0.856052609391));+#5360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5361 = PCURVE('',#5362,#5367);+#5362 = PLANE('',#5363);+#5363 = AXIS2_PLACEMENT_3D('',#5364,#5365,#5366);+#5364 = CARTESIAN_POINT('',(-1.042864279035,0.146777918012,2.1500001));+#5365 = DIRECTION('',(0.,1.,0.));+#5366 = DIRECTION('',(-1.,0.,0.));+#5367 = DEFINITIONAL_REPRESENTATION('',(#5368),#5371);+#5368 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5369,#5370),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.641914155596,-0.530276879193),.PIECEWISE_BEZIER_KNOTS.);+#5369 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5370 = CARTESIAN_POINT('',(0.111637276403,-5.00001E-02));+#5371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5372 = ORIENTED_EDGE('',*,*,#5373,.T.);+#5373 = EDGE_CURVE('',#5347,#5374,#5376,.T.);+#5374 = VERTEX_POINT('',#5375);+#5375 = CARTESIAN_POINT('',(-1.154501555439,-0.169487856467,2.1));+#5376 = SURFACE_CURVE('',#5377,(#5381,#5388),.PCURVE_S1.);+#5377 = LINE('',#5378,#5379);+#5378 = CARTESIAN_POINT('',(-1.154501555439,2.000081549234,2.1));+#5379 = VECTOR('',#5380,1.);+#5380 = DIRECTION('',(0.,-1.,0.));+#5381 = PCURVE('',#5046,#5382);+#5382 = DEFINITIONAL_REPRESENTATION('',(#5383),#5387);+#5383 = LINE('',#5384,#5385);+#5384 = CARTESIAN_POINT('',(2.192417711629,4.550548621958E-02));+#5385 = VECTOR('',#5386,1.);+#5386 = DIRECTION('',(0.856052609391,-0.51688870171));+#5387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5388 = PCURVE('',#5389,#5394);+#5389 = PLANE('',#5390);+#5390 = AXIS2_PLACEMENT_3D('',#5391,#5392,#5393);+#5391 = CARTESIAN_POINT('',(-1.154501555439,0.146777918012,2.1500001));+#5392 = DIRECTION('',(-1.,0.,0.));+#5393 = DIRECTION('',(0.,-1.,0.));+#5394 = DEFINITIONAL_REPRESENTATION('',(#5395),#5398);+#5395 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5396,#5397),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.853303631221,2.1695694057),.PIECEWISE_BEZIER_KNOTS.);+#5396 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5397 = CARTESIAN_POINT('',(0.316265774479,-5.00001E-02));+#5398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5399 = ORIENTED_EDGE('',*,*,#5400,.T.);+#5400 = EDGE_CURVE('',#5374,#5401,#5403,.T.);+#5401 = VERTEX_POINT('',#5402);+#5402 = CARTESIAN_POINT('',(-1.203029108137,-0.169487856467,2.1));+#5403 = SURFACE_CURVE('',#5404,(#5408,#5415),.PCURVE_S1.);+#5404 = LINE('',#5405,#5406);+#5405 = CARTESIAN_POINT('',(-1.740597072833,-0.169487856467,2.1));+#5406 = VECTOR('',#5407,1.);+#5407 = DIRECTION('',(-1.,0.,0.));+#5408 = PCURVE('',#5046,#5409);+#5409 = DEFINITIONAL_REPRESENTATION('',(#5410),#5414);+#5410 = LINE('',#5411,#5412);+#5411 = CARTESIAN_POINT('',(3.746737111569,-1.57764902418));+#5412 = VECTOR('',#5413,1.);+#5413 = DIRECTION('',(-0.51688870171,-0.856052609391));+#5414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5415 = PCURVE('',#5416,#5421);+#5416 = PLANE('',#5417);+#5417 = AXIS2_PLACEMENT_3D('',#5418,#5419,#5420);+#5418 = CARTESIAN_POINT('',(-1.154501555439,-0.169487856467,2.1500001));+#5419 = DIRECTION('',(0.,1.,0.));+#5420 = DIRECTION('',(-1.,0.,0.));+#5421 = DEFINITIONAL_REPRESENTATION('',(#5422),#5425);+#5422 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5423,#5424),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.586095517395,-0.537567964697),.PIECEWISE_BEZIER_KNOTS.);+#5423 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5424 = CARTESIAN_POINT('',(4.852755269781E-02,-5.00001E-02));+#5425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5426 = ORIENTED_EDGE('',*,*,#5427,.T.);+#5427 = EDGE_CURVE('',#5401,#5237,#5428,.T.);+#5428 = SURFACE_CURVE('',#5429,(#5433,#5440),.PCURVE_S1.);+#5429 = LINE('',#5430,#5431);+#5430 = CARTESIAN_POINT('',(-1.203029108137,1.841948661994,2.1));+#5431 = VECTOR('',#5432,1.);+#5432 = DIRECTION('',(0.,1.,0.));+#5433 = PCURVE('',#5046,#5434);+#5434 = DEFINITIONAL_REPRESENTATION('',(#5435),#5439);+#5435 = LINE('',#5436,#5437);+#5436 = CARTESIAN_POINT('',(2.302704438669,-7.777375467754E-02));+#5437 = VECTOR('',#5438,1.);+#5438 = DIRECTION('',(-0.856052609391,0.51688870171));+#5439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5440 = PCURVE('',#5441,#5446);+#5441 = PLANE('',#5442);+#5442 = AXIS2_PLACEMENT_3D('',#5443,#5444,#5445);+#5443 = CARTESIAN_POINT('',(-1.203029108137,-0.169487856467,2.1500001));+#5444 = DIRECTION('',(1.,0.,0.));+#5445 = DIRECTION('',(0.,1.,0.));+#5446 = DEFINITIONAL_REPRESENTATION('',(#5447),#5450);+#5447 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5448,#5449),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-2.011436518461,-1.695170743982),.PIECEWISE_BEZIER_KNOTS.);+#5448 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5449 = CARTESIAN_POINT('',(0.316265774479,-5.00001E-02));+#5450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5451 = FACE_BOUND('',#5452,.T.);+#5452 = EDGE_LOOP('',(#5453,#5482,#5509,#5536,#5572,#5617,#5653,#5689,+ #5734,#5770,#5815));+#5453 = ORIENTED_EDGE('',*,*,#5454,.T.);+#5454 = EDGE_CURVE('',#5455,#5457,#5459,.T.);+#5455 = VERTEX_POINT('',#5456);+#5456 = CARTESIAN_POINT('',(-0.88628522969,-0.169487856467,2.1));+#5457 = VERTEX_POINT('',#5458);+#5458 = CARTESIAN_POINT('',(-0.9919462065,-0.169487856467,2.1));+#5459 = SURFACE_CURVE('',#5460,(#5464,#5471),.PCURVE_S1.);+#5460 = LINE('',#5461,#5462);+#5461 = CARTESIAN_POINT('',(-1.606488909959,-0.169487856467,2.1));+#5462 = VECTOR('',#5463,1.);+#5463 = DIRECTION('',(-1.,0.,0.));+#5464 = PCURVE('',#5046,#5465);+#5465 = DEFINITIONAL_REPRESENTATION('',(#5466),#5470);+#5466 = LINE('',#5467,#5468);+#5467 = CARTESIAN_POINT('',(3.816056105765,-1.462845381411));+#5468 = VECTOR('',#5469,1.);+#5469 = DIRECTION('',(-0.51688870171,-0.856052609391));+#5470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5471 = PCURVE('',#5472,#5477);+#5472 = PLANE('',#5473);+#5473 = AXIS2_PLACEMENT_3D('',#5474,#5475,#5476);+#5474 = CARTESIAN_POINT('',(-0.88628522969,-0.169487856467,2.1500001));+#5475 = DIRECTION('',(0.,1.,0.));+#5476 = DIRECTION('',(-1.,0.,0.));+#5477 = DEFINITIONAL_REPRESENTATION('',(#5478),#5481);+#5478 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5479,#5480),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.720203680269,-0.614542703459),.PIECEWISE_BEZIER_KNOTS.);+#5479 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5480 = CARTESIAN_POINT('',(0.10566097681,-5.00001E-02));+#5481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5482 = ORIENTED_EDGE('',*,*,#5483,.T.);+#5483 = EDGE_CURVE('',#5457,#5484,#5486,.T.);+#5484 = VERTEX_POINT('',#5485);+#5485 = CARTESIAN_POINT('',(-0.9919462065,0.187416755247,2.1));+#5486 = SURFACE_CURVE('',#5487,(#5491,#5498),.PCURVE_S1.);+#5487 = LINE('',#5488,#5489);+#5488 = CARTESIAN_POINT('',(-0.9919462065,1.841948661994,2.1));+#5489 = VECTOR('',#5490,1.);+#5490 = DIRECTION('',(0.,1.,0.));+#5491 = PCURVE('',#5046,#5492);+#5492 = DEFINITIONAL_REPRESENTATION('',(#5493),#5497);+#5493 = LINE('',#5494,#5495);+#5494 = CARTESIAN_POINT('',(2.411810805649,0.102924314066));+#5495 = VECTOR('',#5496,1.);+#5496 = DIRECTION('',(-0.856052609391,0.51688870171));+#5497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5498 = PCURVE('',#5499,#5504);+#5499 = PLANE('',#5500);+#5500 = AXIS2_PLACEMENT_3D('',#5501,#5502,#5503);+#5501 = CARTESIAN_POINT('',(-0.9919462065,-0.169487856467,2.1500001));+#5502 = DIRECTION('',(1.,0.,0.));+#5503 = DIRECTION('',(0.,1.,0.));+#5504 = DEFINITIONAL_REPRESENTATION('',(#5505),#5508);+#5505 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5506,#5507),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-2.011436518461,-1.654531906747),.PIECEWISE_BEZIER_KNOTS.);+#5506 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5507 = CARTESIAN_POINT('',(0.356904611713,-5.00001E-02));+#5508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5509 = ORIENTED_EDGE('',*,*,#5510,.T.);+#5510 = EDGE_CURVE('',#5484,#5511,#5513,.T.);+#5511 = VERTEX_POINT('',#5512);+#5512 = CARTESIAN_POINT('',(-0.88628522969,0.187416755247,2.1));+#5513 = SURFACE_CURVE('',#5514,(#5518,#5525),.PCURVE_S1.);+#5514 = LINE('',#5515,#5516);+#5515 = CARTESIAN_POINT('',(-1.659319398364,0.187416755247,2.1));+#5516 = VECTOR('',#5517,1.);+#5517 = DIRECTION('',(1.,0.,-0.));+#5518 = PCURVE('',#5046,#5519);+#5519 = DEFINITIONAL_REPRESENTATION('',(#5520),#5524);+#5520 = LINE('',#5521,#5522);+#5521 = CARTESIAN_POINT('',(3.483219499042,-1.323591097483));+#5522 = VECTOR('',#5523,1.);+#5523 = DIRECTION('',(0.51688870171,0.856052609391));+#5524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5525 = PCURVE('',#5526,#5531);+#5526 = PLANE('',#5527);+#5527 = AXIS2_PLACEMENT_3D('',#5528,#5529,#5530);+#5528 = CARTESIAN_POINT('',(-0.9919462065,0.187416755247,2.1500001));+#5529 = DIRECTION('',(0.,-1.,0.));+#5530 = DIRECTION('',(1.,0.,0.));+#5531 = DEFINITIONAL_REPRESENTATION('',(#5532),#5535);+#5532 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5533,#5534),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.667373191864,0.773034168674),.PIECEWISE_BEZIER_KNOTS.);+#5533 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5534 = CARTESIAN_POINT('',(0.10566097681,-5.00001E-02));+#5535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5536 = ORIENTED_EDGE('',*,*,#5537,.F.);+#5537 = EDGE_CURVE('',#5538,#5511,#5540,.T.);+#5538 = VERTEX_POINT('',#5539);+#5539 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.1));+#5540 = SURFACE_CURVE('',#5541,(#5547,#5556),.PCURVE_S1.);+#5541 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5542,#5543,#5544,#5545,#5546),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5542 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.1));+#5543 = CARTESIAN_POINT('',(-0.816738197382,0.175597330446,2.1));+#5544 = CARTESIAN_POINT('',(-0.83576601199,0.183487676149,2.1));+#5545 = CARTESIAN_POINT('',(-0.858966715864,0.187416755247,2.1));+#5546 = CARTESIAN_POINT('',(-0.88628522969,0.187416755247,2.1));+#5547 = PCURVE('',#5046,#5548);+#5548 = DEFINITIONAL_REPRESENTATION('',(#5549),#5555);+#5549 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5550,#5551,#5552,#5553,#5554),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5550 = CARTESIAN_POINT('',(3.946669427374,-0.601827644641));+#5551 = CARTESIAN_POINT('',(3.928858251546,-0.608406588898));+#5552 = CARTESIAN_POINT('',(3.912268438128,-0.620616968699));+#5553 = CARTESIAN_POINT('',(3.896912758009,-0.638447095196));+#5554 = CARTESIAN_POINT('',(3.882792126865,-0.661833180241));+#5555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5556 = PCURVE('',#5557,#5564);+#5557 = SURFACE_OF_LINEAR_EXTRUSION('',#5558,#5562);+#5558 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5559,#5560,#5561),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5559 = CARTESIAN_POINT('',(-0.88628522969,0.187416755247,2.1500001));+#5560 = CARTESIAN_POINT('',(-0.831542325415,0.187416755247,2.1500001));+#5561 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.1500001));+#5562 = VECTOR('',#5563,1.);+#5563 = DIRECTION('',(0.,0.,1.));+#5564 = DEFINITIONAL_REPRESENTATION('',(#5565),#5571);+#5565 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5566,#5567,#5568,#5569,#5570),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5566 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5567 = CARTESIAN_POINT('',(0.749711647318,-5.00001E-02));+#5568 = CARTESIAN_POINT('',(0.499484120624,-5.00001E-02));+#5569 = CARTESIAN_POINT('',(0.249516482436,-5.00001E-02));+#5570 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5572 = ORIENTED_EDGE('',*,*,#5573,.F.);+#5573 = EDGE_CURVE('',#5574,#5538,#5576,.T.);+#5574 = VERTEX_POINT('',#5575);+#5575 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.1));+#5576 = SURFACE_CURVE('',#5577,(#5586,#5598),.PCURVE_S1.);+#5577 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5578,#5579,#5580,#5581,#5582,+ #5583,#5584,#5585),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.670063790557,+ 1.),.UNSPECIFIED.);+#5578 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.1));+#5579 = CARTESIAN_POINT('',(-0.77225743345,0.111300050974,2.1));+#5580 = CARTESIAN_POINT('',(-0.774471838674,0.124330572499,2.1));+#5581 = CARTESIAN_POINT('',(-0.77890816229,0.13589725577,2.1));+#5582 = CARTESIAN_POINT('',(-0.788841194421,0.150968970147,2.1));+#5583 = CARTESIAN_POINT('',(-0.792656571484,0.155585833828,2.1));+#5584 = CARTESIAN_POINT('',(-0.797009761298,0.159846401637,2.1));+#5585 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.1));+#5586 = PCURVE('',#5046,#5587);+#5587 = DEFINITIONAL_REPRESENTATION('',(#5588),#5597);+#5588 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5589,#5590,#5591,#5592,#5593,+ #5594,#5595,#5596),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.670063790557,+ 1.),.UNSPECIFIED.);+#5589 = CARTESIAN_POINT('',(4.019290773641,-0.611049866872));+#5590 = CARTESIAN_POINT('',(4.006891709734,-0.603563252176));+#5591 = CARTESIAN_POINT('',(3.994592296739,-0.598723570193));+#5592 = CARTESIAN_POINT('',(3.982397521789,-0.596542608702));+#5593 = CARTESIAN_POINT('',(3.964361069286,-0.5972554079));+#5594 = CARTESIAN_POINT('',(3.958436665788,-0.598135166716));+#5595 = CARTESIAN_POINT('',(3.952539280967,-0.599659486853));+#5596 = CARTESIAN_POINT('',(3.946669427374,-0.601827644641));+#5597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5598 = PCURVE('',#5599,#5606);+#5599 = SURFACE_OF_LINEAR_EXTRUSION('',#5600,#5604);+#5600 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5601,#5602,#5603),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5601 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.1500001));+#5602 = CARTESIAN_POINT('',(-0.77225743345,0.140084462468,2.1500001));+#5603 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.1500001)+ );+#5604 = VECTOR('',#5605,1.);+#5605 = DIRECTION('',(0.,0.,1.));+#5606 = DEFINITIONAL_REPRESENTATION('',(#5607),#5616);+#5607 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5608,#5609,#5610,#5611,#5612,+ #5613,#5614,#5615),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.670063790557,+ 1.),.UNSPECIFIED.);+#5608 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5609 = CARTESIAN_POINT('',(0.832626182959,-5.00001E-02));+#5610 = CARTESIAN_POINT('',(0.665126538452,-5.00001E-02));+#5611 = CARTESIAN_POINT('',(0.497563396405,-5.00001E-02));+#5612 = CARTESIAN_POINT('',(0.247492584094,-5.00001E-02));+#5613 = CARTESIAN_POINT('',(0.164985094615,-5.00001E-02));+#5614 = CARTESIAN_POINT('',(8.248506444609E-02,-5.00001E-02));+#5615 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5617 = ORIENTED_EDGE('',*,*,#5618,.F.);+#5618 = EDGE_CURVE('',#5619,#5574,#5621,.T.);+#5619 = VERTEX_POINT('',#5620);+#5620 = CARTESIAN_POINT('',(-0.787915338384,4.518082492555E-02,2.1));+#5621 = SURFACE_CURVE('',#5622,(#5628,#5637),.PCURVE_S1.);+#5622 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5623,#5624,#5625,#5626,#5627),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5623 = CARTESIAN_POINT('',(-0.787915338384,4.518082492554E-02,2.1));+#5624 = CARTESIAN_POINT('',(-0.780083848928,5.462643816227E-02,2.1));+#5625 = CARTESIAN_POINT('',(-0.774863876958,6.638417940085E-02,2.1));+#5626 = CARTESIAN_POINT('',(-0.77225743345,8.045104971283E-02,2.1));+#5627 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.1));+#5628 = PCURVE('',#5046,#5629);+#5629 = DEFINITIONAL_REPRESENTATION('',(#5630),#5636);+#5630 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5631,#5632,#5633,#5634,#5635),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5631 = CARTESIAN_POINT('',(4.05539985157,-0.651143523463));+#5632 = CARTESIAN_POINT('',(4.051361918129,-0.639557025717));+#5633 = CARTESIAN_POINT('',(4.043994817596,-0.629011011487));+#5634 = CARTESIAN_POINT('',(4.033300077761,-0.619508752387));+#5635 = CARTESIAN_POINT('',(4.019290773641,-0.611049866872));+#5636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5637 = PCURVE('',#5638,#5645);+#5638 = SURFACE_OF_LINEAR_EXTRUSION('',#5639,#5643);+#5639 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5640,#5641,#5642),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5640 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.1500001)+ );+#5641 = CARTESIAN_POINT('',(-0.77225743345,6.406593164046E-02,2.1500001)+ );+#5642 = CARTESIAN_POINT('',(-0.787915338384,4.518082492555E-02,2.1500001+ ));+#5643 = VECTOR('',#5644,1.);+#5644 = DIRECTION('',(0.,0.,1.));+#5645 = DEFINITIONAL_REPRESENTATION('',(#5646),#5652);+#5646 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5647,#5648,#5649,#5650,#5651),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5647 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5648 = CARTESIAN_POINT('',(0.749918986974,-5.00001E-02));+#5649 = CARTESIAN_POINT('',(0.499843481777,-5.00001E-02));+#5650 = CARTESIAN_POINT('',(0.249846455736,-5.00001E-02));+#5651 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5653 = ORIENTED_EDGE('',*,*,#5654,.F.);+#5654 = EDGE_CURVE('',#5655,#5619,#5657,.T.);+#5655 = VERTEX_POINT('',#5656);+#5656 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,2.1));+#5657 = SURFACE_CURVE('',#5658,(#5664,#5673),.PCURVE_S1.);+#5658 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5659,#5660,#5661,#5662,#5663),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5659 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,2.1));+#5660 = CARTESIAN_POINT('',(-0.819239725054,2.390388893813E-02,2.1));+#5661 = CARTESIAN_POINT('',(-0.806188400355,2.864254204565E-02,2.1));+#5662 = CARTESIAN_POINT('',(-0.795746271511,3.573588268136E-02,2.1));+#5663 = CARTESIAN_POINT('',(-0.787915338384,4.518082492554E-02,2.1));+#5664 = PCURVE('',#5046,#5665);+#5665 = DEFINITIONAL_REPRESENTATION('',(#5666),#5672);+#5666 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5667,#5668,#5669,#5670,#5671),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5667 = CARTESIAN_POINT('',(4.051379135482,-0.703588258275));+#5668 = CARTESIAN_POINT('',(4.057422806585,-0.688956654228));+#5669 = CARTESIAN_POINT('',(4.060112352506,-0.675334677411));+#5670 = CARTESIAN_POINT('',(4.059437498167,-0.662729198135));+#5671 = CARTESIAN_POINT('',(4.05539985157,-0.651143523463));+#5672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5673 = PCURVE('',#5674,#5681);+#5674 = SURFACE_OF_LINEAR_EXTRUSION('',#5675,#5679);+#5675 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5676,#5677,#5678),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5676 = CARTESIAN_POINT('',(-0.787915338384,4.518082492555E-02,2.1500001+ ));+#5677 = CARTESIAN_POINT('',(-0.803573243319,2.629571821064E-02,2.1500001+ ));+#5678 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,2.1500001+ ));+#5679 = VECTOR('',#5680,1.);+#5680 = DIRECTION('',(0.,0.,1.));+#5681 = DEFINITIONAL_REPRESENTATION('',(#5682),#5688);+#5682 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5683,#5684,#5685,#5686,#5687),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5683 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5684 = CARTESIAN_POINT('',(0.750136940421,-5.00001E-02));+#5685 = CARTESIAN_POINT('',(0.500133586256,-5.00001E-02));+#5686 = CARTESIAN_POINT('',(0.250063247901,-5.00001E-02));+#5687 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5689 = ORIENTED_EDGE('',*,*,#5690,.F.);+#5690 = EDGE_CURVE('',#5691,#5655,#5693,.T.);+#5691 = VERTEX_POINT('',#5692);+#5692 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,2.1));+#5693 = SURFACE_CURVE('',#5694,(#5703,#5715),.PCURVE_S1.);+#5694 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5695,#5696,#5697,#5698,#5699,+ #5700,#5701,#5702),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.293965245932,+ 1.),.UNSPECIFIED.);+#5695 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,2.1));+#5696 = CARTESIAN_POINT('',(-0.782721609571,-4.849543044337E-03,2.1));+#5697 = CARTESIAN_POINT('',(-0.785874502951,-1.493115557279E-03,2.1));+#5698 = CARTESIAN_POINT('',(-0.789246217221,1.5827215104E-03,2.1));+#5699 = CARTESIAN_POINT('',(-0.801459937514,1.109115458067E-02,2.1));+#5700 = CARTESIAN_POINT('',(-0.811344784072,1.618529887917E-02,2.1));+#5701 = CARTESIAN_POINT('',(-0.8224894169,1.965895065619E-02,2.1));+#5702 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,2.1));+#5703 = PCURVE('',#5046,#5704);+#5704 = DEFINITIONAL_REPRESENTATION('',(#5705),#5714);+#5705 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5706,#5707,#5708,#5709,#5710,+ #5711,#5712,#5713),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.293965245932,+ 1.),.UNSPECIFIED.);+#5706 = CARTESIAN_POINT('',(4.105542923949,-0.671925680938));+#5707 = CARTESIAN_POINT('',(4.100913058363,-0.672557550306));+#5708 = CARTESIAN_POINT('',(4.096410084889,-0.673521693465));+#5709 = CARTESIAN_POINT('',(4.092034205529,-0.674818192836));+#5710 = CARTESIAN_POINT('',(4.077581352563,-0.680358978338));+#5711 = CARTESIAN_POINT('',(4.06811113154,-0.686187821394));+#5712 = CARTESIAN_POINT('',(4.059376968078,-0.69393272205));+#5713 = CARTESIAN_POINT('',(4.051379135482,-0.703588258275));+#5714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5715 = PCURVE('',#5716,#5723);+#5716 = SURFACE_OF_LINEAR_EXTRUSION('',#5717,#5721);+#5717 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5718,#5719,#5720),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5718 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,2.1500001+ ));+#5719 = CARTESIAN_POINT('',(-0.799748411579,1.625553489385E-02,2.1500001+ ));+#5720 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,+ 2.1500001));+#5721 = VECTOR('',#5722,1.);+#5722 = DIRECTION('',(0.,0.,1.));+#5723 = DEFINITIONAL_REPRESENTATION('',(#5724),#5733);+#5724 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5725,#5726,#5727,#5728,#5729,+ #5730,#5731,#5732),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.293965245932,+ 1.),.UNSPECIFIED.);+#5725 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5726 = CARTESIAN_POINT('',(0.926505133569,-5.00001E-02));+#5727 = CARTESIAN_POINT('',(0.853005130008,-5.00001E-02));+#5728 = CARTESIAN_POINT('',(0.779502560567,-5.00001E-02));+#5729 = CARTESIAN_POINT('',(0.529464293853,-5.00001E-02));+#5730 = CARTESIAN_POINT('',(0.352928624657,-5.00001E-02));+#5731 = CARTESIAN_POINT('',(0.176428712169,-5.00001E-02));+#5732 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5734 = ORIENTED_EDGE('',*,*,#5735,.F.);+#5735 = EDGE_CURVE('',#5736,#5691,#5738,.T.);+#5736 = VERTEX_POINT('',#5737);+#5737 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,2.1));+#5738 = SURFACE_CURVE('',#5739,(#5745,#5754),.PCURVE_S1.);+#5739 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5740,#5741,#5742,#5743,#5744),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5740 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,2.1));+#5741 = CARTESIAN_POINT('',(-0.759826730295,-5.236467157947E-02,2.1));+#5742 = CARTESIAN_POINT('',(-0.763149259095,-3.548789331273E-02,2.1));+#5743 = CARTESIAN_POINT('',(-0.769804580073,-2.086047182364E-02,2.1));+#5744 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,2.1));+#5745 = PCURVE('',#5046,#5746);+#5746 = DEFINITIONAL_REPRESENTATION('',(#5747),#5753);+#5747 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5748,#5749,#5750,#5751,#5752),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5748 = CARTESIAN_POINT('',(4.169783380072,-0.687397072737));+#5749 = CARTESIAN_POINT('',(4.153422612556,-0.677518362261));+#5750 = CARTESIAN_POINT('',(4.137257824885,-0.671639205702));+#5751 = CARTESIAN_POINT('',(4.121295922331,-0.669775761689));+#5752 = CARTESIAN_POINT('',(4.105542923949,-0.671925680938));+#5753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5754 = PCURVE('',#5755,#5762);+#5755 = SURFACE_OF_LINEAR_EXTRUSION('',#5756,#5760);+#5756 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5757,#5758,#5759),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5757 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,+ 2.1500001));+#5758 = CARTESIAN_POINT('',(-0.759826730295,-3.322822573889E-02,+ 2.1500001));+#5759 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,+ 2.1500001));+#5760 = VECTOR('',#5761,1.);+#5761 = DIRECTION('',(0.,0.,1.));+#5762 = DEFINITIONAL_REPRESENTATION('',(#5763),#5769);+#5763 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5764,#5765,#5766,#5767,#5768),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5764 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5765 = CARTESIAN_POINT('',(0.7501606233,-5.00001E-02));+#5766 = CARTESIAN_POINT('',(0.500150194899,-5.00001E-02));+#5767 = CARTESIAN_POINT('',(0.250064389668,-5.00001E-02));+#5768 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5770 = ORIENTED_EDGE('',*,*,#5771,.F.);+#5771 = EDGE_CURVE('',#5772,#5736,#5774,.T.);+#5772 = VERTEX_POINT('',#5773);+#5773 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.1));+#5774 = SURFACE_CURVE('',#5775,(#5784,#5796),.PCURVE_S1.);+#5775 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5776,#5777,#5778,#5779,#5780,+ #5781,#5782,#5783),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269904083374,+ 1.),.UNSPECIFIED.);+#5776 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.1));+#5777 = CARTESIAN_POINT('',(-0.787329111671,-0.14140632495,2.1));+#5778 = CARTESIAN_POINT('',(-0.78342311073,-0.137777260353,2.1));+#5779 = CARTESIAN_POINT('',(-0.7799032302,-0.133858839735,2.1));+#5780 = CARTESIAN_POINT('',(-0.768293464309,-0.118270137187,2.1));+#5781 = CARTESIAN_POINT('',(-0.762644253557,-0.104773976039,2.1));+#5782 = CARTESIAN_POINT('',(-0.759826730295,-8.916934233775E-02,2.1));+#5783 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,2.1));+#5784 = PCURVE('',#5046,#5785);+#5785 = DEFINITIONAL_REPRESENTATION('',(#5786),#5795);+#5786 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5787,#5788,#5789,#5790,#5791,+ #5792,#5793,#5794),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269904083374,+ 1.),.UNSPECIFIED.);+#5787 = CARTESIAN_POINT('',(4.216071954547,-0.752486477745));+#5788 = CARTESIAN_POINT('',(4.215431282064,-0.747086472211));+#5789 = CARTESIAN_POINT('',(4.214343579602,-0.741866907425));+#5790 = CARTESIAN_POINT('',(4.212808591885,-0.736828317167));+#5791 = CARTESIAN_POINT('',(4.20546479921,-0.71883212256));+#5792 = CARTESIAN_POINT('',(4.196831388454,-0.707020087741));+#5793 = CARTESIAN_POINT('',(4.184929346996,-0.696542280746));+#5794 = CARTESIAN_POINT('',(4.169783380072,-0.687397072737));+#5795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5796 = PCURVE('',#5797,#5804);+#5797 = SURFACE_OF_LINEAR_EXTRUSION('',#5798,#5802);+#5798 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5799,#5800,#5801),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5799 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,+ 2.1500001));+#5800 = CARTESIAN_POINT('',(-0.759826730295,-0.120004095834,2.1500001));+#5801 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.1500001));+#5802 = VECTOR('',#5803,1.);+#5803 = DIRECTION('',(0.,0.,1.));+#5804 = DEFINITIONAL_REPRESENTATION('',(#5805),#5814);+#5805 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5806,#5807,#5808,#5809,#5810,+ #5811,#5812,#5813),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269904083374,+ 1.),.UNSPECIFIED.);+#5806 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5807 = CARTESIAN_POINT('',(0.932510157716,-5.00001E-02));+#5808 = CARTESIAN_POINT('',(0.865010120815,-5.00001E-02));+#5809 = CARTESIAN_POINT('',(0.797505019752,-5.00001E-02));+#5810 = CARTESIAN_POINT('',(0.547397578219,-5.00001E-02));+#5811 = CARTESIAN_POINT('',(0.364795639641,-5.00001E-02));+#5812 = CARTESIAN_POINT('',(0.182296429739,-5.00001E-02));+#5813 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5815 = ORIENTED_EDGE('',*,*,#5816,.F.);+#5816 = EDGE_CURVE('',#5455,#5772,#5817,.T.);+#5817 = SURFACE_CURVE('',#5818,(#5824,#5833),.PCURVE_S1.);+#5818 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5819,#5820,#5821,#5822,#5823),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5819 = CARTESIAN_POINT('',(-0.88628522969,-0.169487856467,2.1));+#5820 = CARTESIAN_POINT('',(-0.854938431171,-0.169487856467,2.1));+#5821 = CARTESIAN_POINT('',(-0.828661631417,-0.165387480575,2.1));+#5822 = CARTESIAN_POINT('',(-0.807546045111,-0.157139051348,2.1));+#5823 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.1));+#5824 = PCURVE('',#5046,#5825);+#5825 = DEFINITIONAL_REPRESENTATION('',(#5826),#5832);+#5826 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5827,#5828,#5829,#5830,#5831),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5827 = CARTESIAN_POINT('',(4.188321251026,-0.846313141624));+#5828 = CARTESIAN_POINT('',(4.204524057016,-0.819478632955));+#5829 = CARTESIAN_POINT('',(4.214596100444,-0.794864871988));+#5830 = CARTESIAN_POINT('',(4.218449419073,-0.772525299358));+#5831 = CARTESIAN_POINT('',(4.216071954547,-0.752486477745));+#5832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5833 = PCURVE('',#5834,#5841);+#5834 = SURFACE_OF_LINEAR_EXTRUSION('',#5835,#5839);+#5835 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5836,#5837,#5838),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5836 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.1500001));+#5837 = CARTESIAN_POINT('',(-0.823414557968,-0.169487856467,2.1500001));+#5838 = CARTESIAN_POINT('',(-0.88628522969,-0.169487856467,2.1500001));+#5839 = VECTOR('',#5840,1.);+#5840 = DIRECTION('',(0.,0.,1.));+#5841 = DEFINITIONAL_REPRESENTATION('',(#5842),#5848);+#5842 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5843,#5844,#5845,#5846,#5847),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5843 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5844 = CARTESIAN_POINT('',(0.750704122757,-5.00001E-02));+#5845 = CARTESIAN_POINT('',(0.500770175157,-5.00001E-02));+#5846 = CARTESIAN_POINT('',(0.250447319266,-5.00001E-02));+#5847 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5849 = FACE_BOUND('',#5850,.T.);+#5850 = EDGE_LOOP('',(#5851,#5889,#5916,#5952,#5988,#6033,#6069,#6114,+ #6150,#6195,#6231,#6267,#6312,#6357,#6396,#6432,#6477));+#5851 = ORIENTED_EDGE('',*,*,#5852,.F.);+#5852 = EDGE_CURVE('',#5853,#5855,#5857,.T.);+#5853 = VERTEX_POINT('',#5854);+#5854 = CARTESIAN_POINT('',(-0.499977223978,0.179528039784,2.1));+#5855 = VERTEX_POINT('',#5856);+#5856 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.1));+#5857 = SURFACE_CURVE('',#5858,(#5864,#5873),.PCURVE_S1.);+#5858 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5859,#5860,#5861,#5862,#5863),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5859 = CARTESIAN_POINT('',(-0.499977223978,0.179528039784,2.1));+#5860 = CARTESIAN_POINT('',(-0.508224538677,0.182994302483,2.1));+#5861 = CARTESIAN_POINT('',(-0.516671093572,0.185922707711,2.1));+#5862 = CARTESIAN_POINT('',(-0.525316826799,0.18831321957,2.1));+#5863 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.1));+#5864 = PCURVE('',#5046,#5865);+#5865 = DEFINITIONAL_REPRESENTATION('',(#5866),#5872);+#5866 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5867,#5868,#5869,#5870,#5871),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5867 = CARTESIAN_POINT('',(4.089223525855,-0.335210791816));+#5868 = CARTESIAN_POINT('',(4.081993278839,-0.340479255058));+#5869 = CARTESIAN_POINT('',(4.075120481108,-0.34619629084));+#5870 = CARTESIAN_POINT('',(4.06860519537,-0.352361864759));+#5871 = CARTESIAN_POINT('',(4.062447450502,-0.35897589997));+#5872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5873 = PCURVE('',#5874,#5881);+#5874 = SURFACE_OF_LINEAR_EXTRUSION('',#5875,#5879);+#5875 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5876,#5877,#5878),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5876 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.1500001));+#5877 = CARTESIAN_POINT('',(-0.516471810855,0.186460547312,2.1500001));+#5878 = CARTESIAN_POINT('',(-0.499977223978,0.179528039784,2.1500001));+#5879 = VECTOR('',#5880,1.);+#5880 = DIRECTION('',(0.,0.,1.));+#5881 = DEFINITIONAL_REPRESENTATION('',(#5882),#5888);+#5882 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5883,#5884,#5885,#5886,#5887),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5883 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5884 = CARTESIAN_POINT('',(0.749999355542,-5.00001E-02));+#5885 = CARTESIAN_POINT('',(0.499997826459,-5.00001E-02));+#5886 = CARTESIAN_POINT('',(0.249997384204,-5.00001E-02));+#5887 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5889 = ORIENTED_EDGE('',*,*,#5890,.T.);+#5890 = EDGE_CURVE('',#5853,#5891,#5893,.T.);+#5891 = VERTEX_POINT('',#5892);+#5892 = CARTESIAN_POINT('',(-0.499977223978,0.135064370809,2.1));+#5893 = SURFACE_CURVE('',#5894,(#5898,#5905),.PCURVE_S1.);+#5894 = LINE('',#5895,#5896);+#5895 = CARTESIAN_POINT('',(-0.499977223978,2.016456610119,2.1));+#5896 = VECTOR('',#5897,1.);+#5897 = DIRECTION('',(0.,-1.,0.));+#5898 = PCURVE('',#5046,#5899);+#5899 = DEFINITIONAL_REPRESENTATION('',(#5900),#5904);+#5900 = LINE('',#5901,#5902);+#5901 = CARTESIAN_POINT('',(2.516716029955,0.614276832038));+#5902 = VECTOR('',#5903,1.);+#5903 = DIRECTION('',(0.856052609391,-0.51688870171));+#5904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5905 = PCURVE('',#5906,#5911);+#5906 = PLANE('',#5907);+#5907 = AXIS2_PLACEMENT_3D('',#5908,#5909,#5910);+#5908 = CARTESIAN_POINT('',(-0.499977223978,0.179528039784,2.1500001));+#5909 = DIRECTION('',(-1.,0.,0.));+#5910 = DIRECTION('',(0.,-1.,0.));+#5911 = DEFINITIONAL_REPRESENTATION('',(#5912),#5915);+#5912 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5913,#5914),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.836928570336,1.88139223931),.PIECEWISE_BEZIER_KNOTS.);+#5913 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5914 = CARTESIAN_POINT('',(4.446366897435E-02,-5.00001E-02));+#5915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5916 = ORIENTED_EDGE('',*,*,#5917,.F.);+#5917 = EDGE_CURVE('',#5918,#5891,#5920,.T.);+#5918 = VERTEX_POINT('',#5919);+#5919 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.1));+#5920 = SURFACE_CURVE('',#5921,(#5927,#5936),.PCURVE_S1.);+#5921 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5922,#5923,#5924,#5925,#5926),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5922 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.1));+#5923 = CARTESIAN_POINT('',(-0.523523944477,0.146240078541,2.1));+#5924 = CARTESIAN_POINT('',(-0.515356281177,0.14321209047,2.1));+#5925 = CARTESIAN_POINT('',(-0.507507344201,0.139486822369,2.1));+#5926 = CARTESIAN_POINT('',(-0.499977223978,0.135064370809,2.1));+#5927 = PCURVE('',#5046,#5928);+#5928 = DEFINITIONAL_REPRESENTATION('',(#5929),#5935);+#5929 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5930,#5931,#5932,#5933,#5934),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5930 = CARTESIAN_POINT('',(4.099167066882,-0.378634139195));+#5931 = CARTESIAN_POINT('',(4.105548738149,-0.372574194412));+#5932 = CARTESIAN_POINT('',(4.112362628118,-0.367147377754));+#5933 = CARTESIAN_POINT('',(4.119608680441,-0.362353823767));+#5934 = CARTESIAN_POINT('',(4.127286765704,-0.358193559946));+#5935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5936 = PCURVE('',#5937,#5944);+#5937 = SURFACE_OF_LINEAR_EXTRUSION('',#5938,#5942);+#5938 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5939,#5940,#5941),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5939 = CARTESIAN_POINT('',(-0.499977223978,0.135064370809,2.1500001));+#5940 = CARTESIAN_POINT('',(-0.515037498953,0.143909294207,2.1500001));+#5941 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.1500001));+#5942 = VECTOR('',#5943,1.);+#5943 = DIRECTION('',(0.,0.,1.));+#5944 = DEFINITIONAL_REPRESENTATION('',(#5945),#5951);+#5945 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5946,#5947,#5948,#5949,#5950),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5946 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5947 = CARTESIAN_POINT('',(0.750002948913,-5.00001E-02));+#5948 = CARTESIAN_POINT('',(0.500001583874,-5.00001E-02));+#5949 = CARTESIAN_POINT('',(0.249999426814,-5.00001E-02));+#5950 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5952 = ORIENTED_EDGE('',*,*,#5953,.F.);+#5953 = EDGE_CURVE('',#5954,#5918,#5956,.T.);+#5954 = VERTEX_POINT('',#5955);+#5955 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.1));+#5956 = SURFACE_CURVE('',#5957,(#5963,#5972),.PCURVE_S1.);+#5957 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5958,#5959,#5960,#5961,#5962),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5958 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.1));+#5959 = CARTESIAN_POINT('',(-0.558186721585,0.153232321573,2.1));+#5960 = CARTESIAN_POINT('',(-0.549222270602,0.152455459957,2.1));+#5961 = CARTESIAN_POINT('',(-0.540496713945,0.150901613818,2.1));+#5962 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.1));+#5963 = PCURVE('',#5046,#5964);+#5964 = DEFINITIONAL_REPRESENTATION('',(#5965),#5971);+#5965 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5966,#5967,#5968,#5969,#5970),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5966 = CARTESIAN_POINT('',(4.076889202043,-0.406511534459));+#5967 = CARTESIAN_POINT('',(4.0816462124,-0.398633143781));+#5968 = CARTESIAN_POINT('',(4.086944870243,-0.391360653117));+#5969 = CARTESIAN_POINT('',(4.092785185938,-0.384694283086));+#5970 = CARTESIAN_POINT('',(4.099167066882,-0.378634139195));+#5971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5972 = PCURVE('',#5973,#5980);+#5973 = SURFACE_OF_LINEAR_EXTRUSION('',#5974,#5978);+#5974 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5975,#5976,#5977),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5975 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.1500001));+#5976 = CARTESIAN_POINT('',(-0.548982880643,0.153232321573,2.1500001));+#5977 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.1500001));+#5978 = VECTOR('',#5979,1.);+#5979 = DIRECTION('',(0.,0.,1.));+#5980 = DEFINITIONAL_REPRESENTATION('',(#5981),#5987);+#5981 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5982,#5983,#5984,#5985,#5986),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5982 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5983 = CARTESIAN_POINT('',(0.750009223894,-5.00001E-02));+#5984 = CARTESIAN_POINT('',(0.500009659798,-5.00001E-02));+#5985 = CARTESIAN_POINT('',(0.250005265061,-5.00001E-02));+#5986 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5988 = ORIENTED_EDGE('',*,*,#5989,.F.);+#5989 = EDGE_CURVE('',#5990,#5954,#5992,.T.);+#5990 = VERTEX_POINT('',#5991);+#5991 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.1));+#5992 = SURFACE_CURVE('',#5993,(#6002,#6014),.PCURVE_S1.);+#5993 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5994,#5995,#5996,#5997,#5998,+ #5999,#6000,#6001),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.394944184389,+ 1.),.UNSPECIFIED.);+#5994 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.1));+#5995 = CARTESIAN_POINT('',(-0.632281578467,0.125509173069,2.1));+#5996 = CARTESIAN_POINT('',(-0.627029799894,0.13143378025,2.1));+#5997 = CARTESIAN_POINT('',(-0.621198578518,0.136460535897,2.1));+#5998 = CARTESIAN_POINT('',(-0.604969587845,0.146913101095,2.1));+#5999 = CARTESIAN_POINT('',(-0.593792790094,0.151128497661,2.1));+#6000 = CARTESIAN_POINT('',(-0.581262686391,0.153232321573,2.1));+#6001 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.1));+#6002 = PCURVE('',#5046,#6003);+#6003 = DEFINITIONAL_REPRESENTATION('',(#6004),#6013);+#6004 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6005,#6006,#6007,#6008,#6009,+ #6010,#6011,#6012),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.394944184389,+ 1.),.UNSPECIFIED.);+#6005 = CARTESIAN_POINT('',(4.070502925873,-0.48391697957));+#6006 = CARTESIAN_POINT('',(4.06707989164,-0.476392021595));+#6007 = CARTESIAN_POINT('',(4.064722701211,-0.468833860329));+#6008 = CARTESIAN_POINT('',(4.063433626369,-0.461243754854));+#6009 = CARTESIAN_POINT('',(4.062874262576,-0.441948072186));+#6010 = CARTESIAN_POINT('',(4.065042821825,-0.430201254448));+#6011 = CARTESIAN_POINT('',(4.069718506911,-0.418387383667));+#6012 = CARTESIAN_POINT('',(4.076889202043,-0.406511534459));+#6013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6014 = PCURVE('',#6015,#6022);+#6015 = SURFACE_OF_LINEAR_EXTRUSION('',#6016,#6020);+#6016 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6017,#6018,#6019),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6017 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.1500001));+#6018 = CARTESIAN_POINT('',(-0.613287864267,0.153232321573,2.1500001));+#6019 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.1500001));+#6020 = VECTOR('',#6021,1.);+#6021 = DIRECTION('',(0.,0.,1.));+#6022 = DEFINITIONAL_REPRESENTATION('',(#6023),#6032);+#6023 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6024,#6025,#6026,#6027,#6028,+ #6029,#6030,#6031),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.394944184389,+ 1.),.UNSPECIFIED.);+#6024 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6025 = CARTESIAN_POINT('',(0.901284473762,-5.00001E-02));+#6026 = CARTESIAN_POINT('',(0.80253451372,-5.00001E-02));+#6027 = CARTESIAN_POINT('',(0.703767267546,-5.00001E-02));+#6028 = CARTESIAN_POINT('',(0.453688214733,-5.00001E-02));+#6029 = CARTESIAN_POINT('',(0.30237631733,-5.00001E-02));+#6030 = CARTESIAN_POINT('',(0.151126506386,-5.00001E-02));+#6031 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6033 = ORIENTED_EDGE('',*,*,#6034,.F.);+#6034 = EDGE_CURVE('',#6035,#5990,#6037,.T.);+#6035 = VERTEX_POINT('',#6036);+#6036 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,2.1));+#6037 = SURFACE_CURVE('',#6038,(#6044,#6053),.PCURVE_S1.);+#6038 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6039,#6040,#6041,#6042,#6043),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6039 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,2.1));+#6040 = CARTESIAN_POINT('',(-0.660620157046,5.045037023859E-02,2.1));+#6041 = CARTESIAN_POINT('',(-0.6567014747,7.862088717188E-02,2.1));+#6042 = CARTESIAN_POINT('',(-0.648813092094,0.101379842573,2.1));+#6043 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.1));+#6044 = PCURVE('',#5046,#6045);+#6045 = DEFINITIONAL_REPRESENTATION('',(#6046),#6052);+#6046 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6047,#6048,#6049,#6050,#6051),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6047 = CARTESIAN_POINT('',(4.145344939372,-0.556752617119));+#6048 = CARTESIAN_POINT('',(4.116686284571,-0.539448382881));+#6049 = CARTESIAN_POINT('',(4.094596362672,-0.521532762709));+#6050 = CARTESIAN_POINT('',(4.079190915358,-0.503016045286));+#6051 = CARTESIAN_POINT('',(4.070502925873,-0.48391697957));+#6052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6053 = PCURVE('',#6054,#6061);+#6054 = SURFACE_OF_LINEAR_EXTRUSION('',#6055,#6059);+#6055 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6056,#6057,#6058),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6056 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.1500001));+#6057 = CARTESIAN_POINT('',(-0.660620157046,8.414629827403E-02,2.1500001+ ));+#6058 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,2.1500001+ ));+#6059 = VECTOR('',#6060,1.);+#6060 = DIRECTION('',(0.,0.,1.));+#6061 = DEFINITIONAL_REPRESENTATION('',(#6062),#6068);+#6062 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6063,#6064,#6065,#6066,#6067),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6063 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6064 = CARTESIAN_POINT('',(0.750812255923,-5.00001E-02));+#6065 = CARTESIAN_POINT('',(0.500910918641,-5.00001E-02));+#6066 = CARTESIAN_POINT('',(0.250549481995,-5.00001E-02));+#6067 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6069 = ORIENTED_EDGE('',*,*,#6070,.F.);+#6070 = EDGE_CURVE('',#6071,#6035,#6073,.T.);+#6071 = VERTEX_POINT('',#6072);+#6072 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.1));+#6073 = SURFACE_CURVE('',#6074,(#6083,#6095),.PCURVE_S1.);+#6074 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6075,#6076,#6077,#6078,#6079,+ #6080,#6081,#6082),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.183987394044,+ 1.),.UNSPECIFIED.);+#6075 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.1));+#6076 = CARTESIAN_POINT('',(-0.630695612439,5.249056736289E-02,2.1));+#6077 = CARTESIAN_POINT('',(-0.632515090821,5.125123130506E-02,2.1));+#6078 = CARTESIAN_POINT('',(-0.6342846678,4.994916492592E-02,2.1));+#6079 = CARTESIAN_POINT('',(-0.643631328443,4.253131689954E-02,2.1));+#6080 = CARTESIAN_POINT('',(-0.650276576635,3.524443759201E-02,2.1));+#6081 = CARTESIAN_POINT('',(-0.655939396218,2.672427590388E-02,2.1));+#6082 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,2.1));+#6083 = PCURVE('',#5046,#6084);+#6084 = DEFINITIONAL_REPRESENTATION('',(#6085),#6094);+#6085 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6086,#6087,#6088,#6089,#6090,+ #6091,#6092,#6093),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.183987394044,+ 1.),.UNSPECIFIED.);+#6086 = CARTESIAN_POINT('',(4.130366449288,-0.510568392346));+#6087 = CARTESIAN_POINT('',(4.13040742751,-0.512776843542));+#6088 = CARTESIAN_POINT('',(4.130527896557,-0.514975011565));+#6089 = CARTESIAN_POINT('',(4.130727859532,-0.517162885955));+#6090 = CARTESIAN_POINT('',(4.132246744406,-0.528998321024));+#6091 = CARTESIAN_POINT('',(4.135049842741,-0.538453508663));+#6092 = CARTESIAN_POINT('',(4.139416501924,-0.547705155457));+#6093 = CARTESIAN_POINT('',(4.145344939372,-0.556752617119));+#6094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6095 = PCURVE('',#6096,#6103);+#6096 = SURFACE_OF_LINEAR_EXTRUSION('',#6097,#6101);+#6097 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6098,#6099,#6100),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6098 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,2.1500001+ ));+#6099 = CARTESIAN_POINT('',(-0.649145661827,4.087788921835E-02,2.1500001+ ));+#6100 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.1500001)+ );+#6101 = VECTOR('',#6102,1.);+#6102 = DIRECTION('',(0.,0.,1.));+#6103 = DEFINITIONAL_REPRESENTATION('',(#6104),#6113);+#6104 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6105,#6106,#6107,#6108,#6109,+ #6110,#6111,#6112),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.183987394044,+ 1.),.UNSPECIFIED.);+#6105 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6106 = CARTESIAN_POINT('',(0.954000425308,-5.00001E-02));+#6107 = CARTESIAN_POINT('',(0.908000427729,-5.00001E-02));+#6108 = CARTESIAN_POINT('',(0.862000216277,-5.00001E-02));+#6109 = CARTESIAN_POINT('',(0.611981911949,-5.00001E-02));+#6110 = CARTESIAN_POINT('',(0.407963726014,-5.00001E-02));+#6111 = CARTESIAN_POINT('',(0.203963692469,-5.00001E-02));+#6112 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6114 = ORIENTED_EDGE('',*,*,#6115,.F.);+#6115 = EDGE_CURVE('',#6116,#6071,#6118,.T.);+#6116 = VERTEX_POINT('',#6117);+#6117 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,2.1));+#6118 = SURFACE_CURVE('',#6119,(#6125,#6134),.PCURVE_S1.);+#6119 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6120,#6121,#6122,#6123,#6124),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6120 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,2.1));+#6121 = CARTESIAN_POINT('',(-0.595356586095,6.645645147779E-02,2.1));+#6122 = CARTESIAN_POINT('',(-0.607509123283,6.432567630328E-02,2.1));+#6123 = CARTESIAN_POINT('',(-0.618666041442,6.006212087222E-02,2.1));+#6124 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.1));+#6125 = PCURVE('',#5046,#6126);+#6126 = DEFINITIONAL_REPRESENTATION('',(#6127),#6133);+#6127 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6128,#6129,#6130,#6131,#6132),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6128 = CARTESIAN_POINT('',(4.14351298936,-0.464052747908));+#6129 = CARTESIAN_POINT('',(4.136718239418,-0.475305970119));+#6130 = CARTESIAN_POINT('',(4.132260785896,-0.486810554903));+#6131 = CARTESIAN_POINT('',(4.130143728706,-0.498565247437));+#6132 = CARTESIAN_POINT('',(4.130366449288,-0.510568392346));+#6133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6134 = PCURVE('',#6135,#6142);+#6135 = SURFACE_OF_LINEAR_EXTRUSION('',#6136,#6140);+#6136 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6137,#6138,#6139),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6137 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.1500001)+ );+#6138 = CARTESIAN_POINT('',(-0.608506824592,6.645645147779E-02,2.1500001+ ));+#6139 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,2.1500001+ ));+#6140 = VECTOR('',#6141,1.);+#6141 = DIRECTION('',(0.,0.,1.));+#6142 = DEFINITIONAL_REPRESENTATION('',(#6143),#6149);+#6143 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6144,#6145,#6146,#6147,#6148),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6144 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6145 = CARTESIAN_POINT('',(0.750045242957,-5.00001E-02));+#6146 = CARTESIAN_POINT('',(0.500038256705,-5.00001E-02));+#6147 = CARTESIAN_POINT('',(0.250012117932,-5.00001E-02));+#6148 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6150 = ORIENTED_EDGE('',*,*,#6151,.F.);+#6151 = EDGE_CURVE('',#6152,#6116,#6154,.T.);+#6152 = VERTEX_POINT('',#6153);+#6153 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,2.1));+#6154 = SURFACE_CURVE('',#6155,(#6164,#6176),.PCURVE_S1.);+#6155 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6156,#6157,#6158,#6159,#6160,+ #6161,#6162,#6163),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219902681755,+ 1.),.UNSPECIFIED.);+#6156 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,2.1));+#6157 = CARTESIAN_POINT('',(-0.505363947862,3.826589679921E-02,2.1));+#6158 = CARTESIAN_POINT('',(-0.5086679658,4.149462250741E-02,2.1));+#6159 = CARTESIAN_POINT('',(-0.512160201957,4.446795345461E-02,2.1));+#6160 = CARTESIAN_POINT('',(-0.528896117044,5.682705902261E-02,2.1));+#6161 = CARTESIAN_POINT('',(-0.544318126804,6.325263033167E-02,2.1));+#6162 = CARTESIAN_POINT('',(-0.562098298603,6.645645147779E-02,2.1));+#6163 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,2.1));+#6164 = PCURVE('',#5046,#6165);+#6165 = DEFINITIONAL_REPRESENTATION('',(#6166),#6175);+#6166 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6167,#6168,#6169,#6170,#6171,+ #6172,#6173,#6174),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219902681755,+ 1.),.UNSPECIFIED.);+#6167 = CARTESIAN_POINT('',(4.211959845377,-0.411972441714));+#6168 = CARTESIAN_POINT('',(4.20736701525,-0.412838916542));+#6169 = CARTESIAN_POINT('',(4.20289524664,-0.413998437879));+#6170 = CARTESIAN_POINT('',(4.198544821511,-0.415451094581));+#6171 = CARTESIAN_POINT('',(4.179314171518,-0.42338963633));+#6172 = CARTESIAN_POINT('',(4.16584208183,-0.433270382816));+#6173 = CARTESIAN_POINT('',(4.153909072461,-0.446835126327));+#6174 = CARTESIAN_POINT('',(4.14351298936,-0.464052747908));+#6175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6176 = PCURVE('',#6177,#6184);+#6177 = SURFACE_OF_LINEAR_EXTRUSION('',#6178,#6182);+#6178 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6179,#6180,#6181),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6179 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,2.1500001+ ));+#6180 = CARTESIAN_POINT('',(-0.530575877895,6.645645147779E-02,2.1500001+ ));+#6181 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,2.1500001+ ));+#6182 = VECTOR('',#6183,1.);+#6183 = DIRECTION('',(0.,0.,1.));+#6184 = DEFINITIONAL_REPRESENTATION('',(#6185),#6194);+#6185 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6186,#6187,#6188,#6189,#6190,+ #6191,#6192,#6193),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219902681755,+ 1.),.UNSPECIFIED.);+#6186 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6187 = CARTESIAN_POINT('',(0.945005517026,-5.00001E-02));+#6188 = CARTESIAN_POINT('',(0.890005540553,-5.00001E-02));+#6189 = CARTESIAN_POINT('',(0.835002792465,-5.00001E-02));+#6190 = CARTESIAN_POINT('',(0.584879455968,-5.00001E-02));+#6191 = CARTESIAN_POINT('',(0.389758208938,-5.00001E-02));+#6192 = CARTESIAN_POINT('',(0.194758582161,-5.00001E-02));+#6193 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6195 = ORIENTED_EDGE('',*,*,#6196,.F.);+#6196 = EDGE_CURVE('',#6197,#6152,#6199,.T.);+#6197 = VERTEX_POINT('',#6198);+#6198 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,2.1));+#6199 = SURFACE_CURVE('',#6200,(#6206,#6215),.PCURVE_S1.);+#6200 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6201,#6202,#6203,#6204,#6205),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6201 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,2.1));+#6202 = CARTESIAN_POINT('',(-0.473920557751,-2.599650955747E-02,2.1));+#6203 = CARTESIAN_POINT('',(-0.478622497516,-1.337121935071E-03,2.1));+#6204 = CARTESIAN_POINT('',(-0.488069378846,1.892808756118E-02,2.1));+#6205 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,2.1));+#6206 = PCURVE('',#5046,#6207);+#6207 = DEFINITIONAL_REPRESENTATION('',(#6208),#6214);+#6208 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6209,#6210,#6211,#6212,#6213),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6209 = CARTESIAN_POINT('',(4.303444816272,-0.434120482093));+#6210 = CARTESIAN_POINT('',(4.278631748989,-0.419138232179));+#6211 = CARTESIAN_POINT('',(4.255091636329,-0.410417181131));+#6212 = CARTESIAN_POINT('',(4.232860564634,-0.408029350718));+#6213 = CARTESIAN_POINT('',(4.211959845377,-0.411972441714));+#6214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6215 = PCURVE('',#6216,#6223);+#6216 = SURFACE_OF_LINEAR_EXTRUSION('',#6217,#6221);+#6217 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6218,#6219,#6220),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6218 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,2.1500001+ ));+#6219 = CARTESIAN_POINT('',(-0.473920557751,3.10767578853E-03,2.1500001)+ );+#6220 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,2.1500001+ ));+#6221 = VECTOR('',#6222,1.);+#6222 = DIRECTION('',(0.,0.,1.));+#6223 = DEFINITIONAL_REPRESENTATION('',(#6224),#6230);+#6224 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6225,#6226,#6227,#6228,#6229),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6225 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6226 = CARTESIAN_POINT('',(0.750511014792,-5.00001E-02));+#6227 = CARTESIAN_POINT('',(0.500518926436,-5.00001E-02));+#6228 = CARTESIAN_POINT('',(0.250264916717,-5.00001E-02));+#6229 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6231 = ORIENTED_EDGE('',*,*,#6232,.F.);+#6232 = EDGE_CURVE('',#6233,#6197,#6235,.T.);+#6233 = VERTEX_POINT('',#6234);+#6234 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.1));+#6235 = SURFACE_CURVE('',#6236,(#6242,#6251),.PCURVE_S1.);+#6236 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6237,#6238,#6239,#6240,#6241),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6237 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.1));+#6238 = CARTESIAN_POINT('',(-0.488488626709,-0.128714119695,2.1));+#6239 = CARTESIAN_POINT('',(-0.478762080138,-0.108450065836,2.1));+#6240 = CARTESIAN_POINT('',(-0.473920557751,-8.385022177448E-02,2.1));+#6241 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,2.1));+#6242 = PCURVE('',#5046,#6243);+#6243 = DEFINITIONAL_REPRESENTATION('',(#6244),#6250);+#6244 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6245,#6246,#6247,#6248,#6249),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6245 = CARTESIAN_POINT('',(4.365110500312,-0.505422919244));+#6246 = CARTESIAN_POINT('',(4.359033356927,-0.484702837772));+#6247 = CARTESIAN_POINT('',(4.346713802774,-0.465902141709));+#6248 = CARTESIAN_POINT('',(4.328157570296,-0.449042162376));+#6249 = CARTESIAN_POINT('',(4.303444816272,-0.434120482093));+#6250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6251 = PCURVE('',#6252,#6259);+#6252 = SURFACE_OF_LINEAR_EXTRUSION('',#6253,#6257);+#6253 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6254,#6255,#6256),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6254 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,2.1500001+ ));+#6255 = CARTESIAN_POINT('',(-0.473920557751,-0.112832536322,2.1500001));+#6256 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.1500001));+#6257 = VECTOR('',#6258,1.);+#6258 = DIRECTION('',(0.,0.,1.));+#6259 = DEFINITIONAL_REPRESENTATION('',(#6260),#6266);+#6260 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6261,#6262,#6263,#6264,#6265),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6261 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6262 = CARTESIAN_POINT('',(0.749758231318,-5.00001E-02));+#6263 = CARTESIAN_POINT('',(0.499508665039,-5.00001E-02));+#6264 = CARTESIAN_POINT('',(0.249507139637,-5.00001E-02));+#6265 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6267 = ORIENTED_EDGE('',*,*,#6268,.F.);+#6268 = EDGE_CURVE('',#6269,#6233,#6271,.T.);+#6269 = VERTEX_POINT('',#6270);+#6270 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.1));+#6271 = SURFACE_CURVE('',#6272,(#6281,#6293),.PCURVE_S1.);+#6272 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6273,#6274,#6275,#6276,#6277,+ #6278,#6279,#6280),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798098700885,+ 1.),.UNSPECIFIED.);+#6273 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.1));+#6274 = CARTESIAN_POINT('',(-0.564028086053,-0.176420363995,2.1));+#6275 = CARTESIAN_POINT('',(-0.545453932411,-0.173054834743,2.1));+#6276 = CARTESIAN_POINT('',(-0.529385874018,-0.166303763003,2.1));+#6277 = CARTESIAN_POINT('',(-0.512404382098,-0.153611234493,2.1));+#6278 = CARTESIAN_POINT('',(-0.50913675951,-0.150832360026,2.1));+#6279 = CARTESIAN_POINT('',(-0.506030244484,-0.147837358745,2.1));+#6280 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.1));+#6281 = PCURVE('',#5046,#6282);+#6282 = DEFINITIONAL_REPRESENTATION('',(#6283),#6292);+#6283 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6284,#6285,#6286,#6287,#6288,+ #6289,#6290,#6291),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798098700885,+ 1.),.UNSPECIFIED.);+#6284 = CARTESIAN_POINT('',(4.349945561772,-0.592048722627));+#6285 = CARTESIAN_POINT('',(4.360826918777,-0.574027407734));+#6286 = CARTESIAN_POINT('',(4.36754661884,-0.556387350997));+#6287 = CARTESIAN_POINT('',(4.370072744103,-0.539142694974));+#6288 = CARTESIAN_POINT('',(4.367984813263,-0.518045019922));+#6289 = CARTESIAN_POINT('',(4.367294947722,-0.513811394263));+#6290 = CARTESIAN_POINT('',(4.366336791578,-0.509603971646));+#6291 = CARTESIAN_POINT('',(4.365110500312,-0.505422919244));+#6292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6293 = PCURVE('',#6294,#6301);+#6294 = SURFACE_OF_LINEAR_EXTRUSION('',#6295,#6299);+#6295 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6296,#6297,#6298),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6296 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.1500001));+#6297 = CARTESIAN_POINT('',(-0.532249241782,-0.176420363995,2.1500001));+#6298 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.1500001));+#6299 = VECTOR('',#6300,1.);+#6300 = DIRECTION('',(0.,0.,1.));+#6301 = DEFINITIONAL_REPRESENTATION('',(#6302),#6311);+#6302 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6303,#6304,#6305,#6306,#6307,+ #6308,#6309,#6310),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798098700885,+ 1.),.UNSPECIFIED.);+#6303 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6304 = CARTESIAN_POINT('',(0.800762355514,-5.00001E-02));+#6305 = CARTESIAN_POINT('',(0.601262760978,-5.00001E-02));+#6306 = CARTESIAN_POINT('',(0.401630949104,-5.00001E-02));+#6307 = CARTESIAN_POINT('',(0.151497790282,-5.00001E-02));+#6308 = CARTESIAN_POINT('',(0.100995625198,-5.00001E-02));+#6309 = CARTESIAN_POINT('',(5.049564836209E-02,-5.00001E-02));+#6310 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6312 = ORIENTED_EDGE('',*,*,#6313,.F.);+#6313 = EDGE_CURVE('',#6314,#6269,#6316,.T.);+#6314 = VERTEX_POINT('',#6315);+#6315 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.1));+#6316 = SURFACE_CURVE('',#6317,(#6326,#6338),.PCURVE_S1.);+#6317 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6318,#6319,#6320,#6321,#6322,+ #6323,#6324,#6325),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.331848251819,+ 1.),.UNSPECIFIED.);+#6318 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.1));+#6319 = CARTESIAN_POINT('',(-0.671359096077,-0.139234652861,2.1));+#6320 = CARTESIAN_POINT('',(-0.665947624437,-0.145817173425,2.1));+#6321 = CARTESIAN_POINT('',(-0.659923959521,-0.151581419075,2.1));+#6322 = CARTESIAN_POINT('',(-0.639931797348,-0.166482366427,2.1));+#6323 = CARTESIAN_POINT('',(-0.624098253557,-0.173116729835,2.1));+#6324 = CARTESIAN_POINT('',(-0.605801353471,-0.176420363995,2.1));+#6325 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.1));+#6326 = PCURVE('',#5046,#6327);+#6327 = DEFINITIONAL_REPRESENTATION('',(#6328),#6337);+#6328 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6329,#6330,#6331,#6332,#6333,+ #6334,#6335,#6336),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.331848251819,+ 1.),.UNSPECIFIED.);+#6329 = CARTESIAN_POINT('',(4.264702395701,-0.64697242223));+#6330 = CARTESIAN_POINT('',(4.273515807304,-0.646687524983));+#6331 = CARTESIAN_POINT('',(4.28194791976,-0.645457451074));+#6332 = CARTESIAN_POINT('',(4.289995981627,-0.643280350456));+#6333 = CARTESIAN_POINT('',(4.31308569924,-0.63386813919));+#6334 = CARTESIAN_POINT('',(4.326949243241,-0.6237430202));+#6335 = CARTESIAN_POINT('',(4.339234788815,-0.60978752231));+#6336 = CARTESIAN_POINT('',(4.349945561772,-0.592048722627));+#6337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6338 = PCURVE('',#6339,#6346);+#6339 = SURFACE_OF_LINEAR_EXTRUSION('',#6340,#6344);+#6340 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6341,#6342,#6343),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6341 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.1500001));+#6342 = CARTESIAN_POINT('',(-0.647233245957,-0.176420363995,2.1500001));+#6343 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.1500001));+#6344 = VECTOR('',#6345,1.);+#6345 = DIRECTION('',(0.,0.,1.));+#6346 = DEFINITIONAL_REPRESENTATION('',(#6347),#6356);+#6347 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6348,#6349,#6350,#6351,#6352,+ #6353,#6354,#6355),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.331848251819,+ 1.),.UNSPECIFIED.);+#6348 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6349 = CARTESIAN_POINT('',(0.917037307022,-5.00001E-02));+#6350 = CARTESIAN_POINT('',(0.834037344787,-5.00001E-02));+#6351 = CARTESIAN_POINT('',(0.751018669357,-5.00001E-02));+#6352 = CARTESIAN_POINT('',(0.500848090178,-5.00001E-02));+#6353 = CARTESIAN_POINT('',(0.333695920914,-5.00001E-02));+#6354 = CARTESIAN_POINT('',(0.166697113005,-5.00001E-02));+#6355 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6357 = ORIENTED_EDGE('',*,*,#6358,.F.);+#6358 = EDGE_CURVE('',#6359,#6314,#6361,.T.);+#6359 = VERTEX_POINT('',#6360);+#6360 = CARTESIAN_POINT('',(-0.705083826021,8.60587141439E-03,2.1));+#6361 = SURFACE_CURVE('',#6362,(#6369,#6379),.PCURVE_S1.);+#6362 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#6363,#6364,#6365,#6366,#6367,+ #6368),.UNSPECIFIED.,.F.,.F.,(6,6),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#6363 = CARTESIAN_POINT('',(-0.705083826021,8.605871414389E-03,2.1));+#6364 = CARTESIAN_POINT('',(-0.705083826021,-2.945860698544E-02,2.1));+#6365 = CARTESIAN_POINT('',(-0.702233306864,-6.264931986112E-02,2.1));+#6366 = CARTESIAN_POINT('',(-0.696478518106,-9.083293817089E-02,2.1));+#6367 = CARTESIAN_POINT('',(-0.687788008239,-0.113912403949,2.1));+#6368 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.1));+#6369 = PCURVE('',#5046,#6370);+#6370 = DEFINITIONAL_REPRESENTATION('',(#6371),#6378);+#6371 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#6372,#6373,#6374,#6375,#6376,+ #6377),.UNSPECIFIED.,.F.,.F.,(6,6),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#6372 = CARTESIAN_POINT('',(4.129524608848,-0.5991405714));+#6373 = CARTESIAN_POINT('',(4.162109804908,-0.618815670222));+#6374 = CARTESIAN_POINT('',(4.191996202418,-0.633531380346));+#6375 = CARTESIAN_POINT('',(4.219097447704,-0.643172772292));+#6376 = CARTESIAN_POINT('',(4.24334671097,-0.647662753745));+#6377 = CARTESIAN_POINT('',(4.264702395701,-0.64697242223));+#6378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6379 = PCURVE('',#6380,#6387);+#6380 = SURFACE_OF_LINEAR_EXTRUSION('',#6381,#6385);+#6381 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6382,#6383,#6384),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6382 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.1500001));+#6383 = CARTESIAN_POINT('',(-0.705083826021,-8.725397406256E-02,+ 2.1500001));+#6384 = CARTESIAN_POINT('',(-0.705083826021,8.60587141439E-03,2.1500001)+ );+#6385 = VECTOR('',#6386,1.);+#6386 = DIRECTION('',(0.,0.,1.));+#6387 = DEFINITIONAL_REPRESENTATION('',(#6388),#6395);+#6388 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#6389,#6390,#6391,#6392,#6393,+ #6394),.UNSPECIFIED.,.F.,.F.,(6,6),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#6389 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6390 = CARTESIAN_POINT('',(0.801457647827,-5.00001E-02));+#6391 = CARTESIAN_POINT('',(0.601979410949,-5.00001E-02));+#6392 = CARTESIAN_POINT('',(0.401763725756,-5.00001E-02));+#6393 = CARTESIAN_POINT('',(0.201026026658,-5.00001E-02));+#6394 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6396 = ORIENTED_EDGE('',*,*,#6397,.F.);+#6397 = EDGE_CURVE('',#6398,#6359,#6400,.T.);+#6398 = VERTEX_POINT('',#6399);+#6399 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.1));+#6400 = SURFACE_CURVE('',#6401,(#6407,#6416),.PCURVE_S1.);+#6401 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6402,#6403,#6404,#6405,#6406),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6402 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.1));+#6403 = CARTESIAN_POINT('',(-0.687755840363,0.122607419224,2.1));+#6404 = CARTESIAN_POINT('',(-0.699351493516,9.161727074681E-02,2.1));+#6405 = CARTESIAN_POINT('',(-0.705083826021,5.353547614368E-02,2.1));+#6406 = CARTESIAN_POINT('',(-0.705083826021,8.605871414389E-03,2.1));+#6407 = PCURVE('',#5046,#6408);+#6408 = DEFINITIONAL_REPRESENTATION('',(#6409),#6415);+#6409 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6410,#6411,#6412,#6413,#6414),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6410 = CARTESIAN_POINT('',(4.029527485139,-0.498131070193));+#6411 = CARTESIAN_POINT('',(4.040889926381,-0.525380792022));+#6412 = CARTESIAN_POINT('',(4.061425461747,-0.551325738774));+#6413 = CARTESIAN_POINT('',(4.091062503481,-0.575916966343));+#6414 = CARTESIAN_POINT('',(4.129524608848,-0.5991405714));+#6415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6416 = PCURVE('',#6417,#6424);+#6417 = SURFACE_OF_LINEAR_EXTRUSION('',#6418,#6422);+#6418 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6419,#6420,#6421),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6419 = CARTESIAN_POINT('',(-0.705083826021,8.60587141439E-03,2.1500001)+ );+#6420 = CARTESIAN_POINT('',(-0.705083826021,9.896752126548E-02,2.1500001+ ));+#6421 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.1500001));+#6422 = VECTOR('',#6423,1.);+#6423 = DIRECTION('',(0.,0.,1.));+#6424 = DEFINITIONAL_REPRESENTATION('',(#6425),#6431);+#6425 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6426,#6427,#6428,#6429,#6430),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6426 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6427 = CARTESIAN_POINT('',(0.74909369726,-5.00001E-02));+#6428 = CARTESIAN_POINT('',(0.498459501957,-5.00001E-02));+#6429 = CARTESIAN_POINT('',(0.248609918053,-5.00001E-02));+#6430 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6432 = ORIENTED_EDGE('',*,*,#6433,.F.);+#6433 = EDGE_CURVE('',#6434,#6398,#6436,.T.);+#6434 = VERTEX_POINT('',#6435);+#6435 = CARTESIAN_POINT('',(-0.569541351244,0.193871158808,2.1));+#6436 = SURFACE_CURVE('',#6437,(#6446,#6458),.PCURVE_S1.);+#6437 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6438,#6439,#6440,#6441,#6442,+ #6443,#6444,#6445),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639134839219,+ 1.),.UNSPECIFIED.);+#6438 = CARTESIAN_POINT('',(-0.569541351244,0.193871158807,2.1));+#6439 = CARTESIAN_POINT('',(-0.590585077068,0.193871158807,2.1));+#6440 = CARTESIAN_POINT('',(-0.609549362218,0.190653053041,2.1));+#6441 = CARTESIAN_POINT('',(-0.62639984749,0.184191735816,2.1));+#6442 = CARTESIAN_POINT('',(-0.649436823633,0.169020991701,2.1));+#6443 = CARTESIAN_POINT('',(-0.657072090924,0.162515167854,2.1));+#6444 = CARTESIAN_POINT('',(-0.664027082031,0.154979642791,2.1));+#6445 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.1));+#6446 = PCURVE('',#5046,#6447);+#6447 = DEFINITIONAL_REPRESENTATION('',(#6448),#6457);+#6448 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6449,#6450,#6451,#6452,#6453,+ #6454,#6455,#6456),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639134839219,+ 1.),.UNSPECIFIED.);+#6449 = CARTESIAN_POINT('',(4.04098814996,-0.387347548312));+#6450 = CARTESIAN_POINT('',(4.030110885839,-0.405362084715));+#6451 = CARTESIAN_POINT('',(4.023063328948,-0.423259913014));+#6452 = CARTESIAN_POINT('',(4.019884730963,-0.441024596772));+#6453 = CARTESIAN_POINT('',(4.02096413336,-0.468587046542));+#6454 = CARTESIAN_POINT('',(4.022586877442,-0.478486023872));+#6455 = CARTESIAN_POINT('',(4.025442727012,-0.488334889924));+#6456 = CARTESIAN_POINT('',(4.029527485139,-0.498131070193));+#6457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6458 = PCURVE('',#6459,#6466);+#6459 = SURFACE_OF_LINEAR_EXTRUSION('',#6460,#6464);+#6460 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6461,#6462,#6463),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6461 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.1500001));+#6462 = CARTESIAN_POINT('',(-0.635519698754,0.193871158808,2.1500001));+#6463 = CARTESIAN_POINT('',(-0.569541351244,0.193871158808,2.1500001));+#6464 = VECTOR('',#6465,1.);+#6465 = DIRECTION('',(0.,0.,1.));+#6466 = DEFINITIONAL_REPRESENTATION('',(#6467),#6476);+#6467 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6468,#6469,#6470,#6471,#6472,+ #6473,#6474,#6475),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639134839219,+ 1.),.UNSPECIFIED.);+#6468 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6469 = CARTESIAN_POINT('',(0.840525516184,-5.00001E-02));+#6470 = CARTESIAN_POINT('',(0.680776389617,-5.00001E-02));+#6471 = CARTESIAN_POINT('',(0.520887921876,-5.00001E-02));+#6472 = CARTESIAN_POINT('',(0.270724870099,-5.00001E-02));+#6473 = CARTESIAN_POINT('',(0.180449830904,-5.00001E-02));+#6474 = CARTESIAN_POINT('',(9.019994360362E-02,-5.00001E-02));+#6475 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6477 = ORIENTED_EDGE('',*,*,#6478,.F.);+#6478 = EDGE_CURVE('',#5855,#6434,#6479,.T.);+#6479 = SURFACE_CURVE('',#6480,(#6486,#6495),.PCURVE_S1.);+#6480 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6481,#6482,#6483,#6484,#6485),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6481 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.1));+#6482 = CARTESIAN_POINT('',(-0.543006419346,0.192018472063,2.1));+#6483 = CARTESIAN_POINT('',(-0.551851342738,0.193253596558,2.1));+#6484 = CARTESIAN_POINT('',(-0.560696346992,0.193871158807,2.1));+#6485 = CARTESIAN_POINT('',(-0.569541351244,0.193871158807,2.1));+#6486 = PCURVE('',#5046,#6487);+#6487 = DEFINITIONAL_REPRESENTATION('',(#6488),#6494);+#6488 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6489,#6490,#6491,#6492,#6493),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6489 = CARTESIAN_POINT('',(4.062447450502,-0.35897589997));+#6490 = CARTESIAN_POINT('',(4.05628975378,-0.365589883467));+#6491 = CARTESIAN_POINT('',(4.050660581264,-0.372523181319));+#6492 = CARTESIAN_POINT('',(4.045560032724,-0.379775759342));+#6493 = CARTESIAN_POINT('',(4.04098814996,-0.387347548312));+#6494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6495 = PCURVE('',#6496,#6503);+#6496 = SURFACE_OF_LINEAR_EXTRUSION('',#6497,#6501);+#6497 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6498,#6499,#6500),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6498 = CARTESIAN_POINT('',(-0.569541351244,0.193871158808,2.1500001));+#6499 = CARTESIAN_POINT('',(-0.551851504448,0.193871158808,2.1500001));+#6500 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.1500001));+#6501 = VECTOR('',#6502,1.);+#6502 = DIRECTION('',(0.,0.,1.));+#6503 = DEFINITIONAL_REPRESENTATION('',(#6504),#6510);+#6504 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6505,#6506,#6507,#6508,#6509),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6505 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6506 = CARTESIAN_POINT('',(0.750004570513,-5.00001E-02));+#6507 = CARTESIAN_POINT('',(0.500004570702,-5.00001E-02));+#6508 = CARTESIAN_POINT('',(0.250002285321,-5.00001E-02));+#6509 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6511 = FACE_BOUND('',#6512,.T.);+#6512 = EDGE_LOOP('',(#6513,#6551,#6578,#6614,#6650,#6695,#6731,#6776,+ #6812,#6857,#6893,#6929,#6974,#7019,#7058,#7094,#7139));+#6513 = ORIENTED_EDGE('',*,*,#6514,.F.);+#6514 = EDGE_CURVE('',#6515,#6517,#6519,.T.);+#6515 = VERTEX_POINT('',#6516);+#6516 = CARTESIAN_POINT('',(-0.205226128035,0.179528039784,2.1));+#6517 = VERTEX_POINT('',#6518);+#6518 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.1));+#6519 = SURFACE_CURVE('',#6520,(#6526,#6535),.PCURVE_S1.);+#6520 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6521,#6522,#6523,#6524,#6525),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6521 = CARTESIAN_POINT('',(-0.205226128035,0.179528039784,2.1));+#6522 = CARTESIAN_POINT('',(-0.213473442734,0.182994302483,2.1));+#6523 = CARTESIAN_POINT('',(-0.221919997629,0.185922707711,2.1));+#6524 = CARTESIAN_POINT('',(-0.230565730857,0.18831321957,2.1));+#6525 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.1));+#6526 = PCURVE('',#5046,#6527);+#6527 = DEFINITIONAL_REPRESENTATION('',(#6528),#6534);+#6528 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6529,#6530,#6531,#6532,#6533),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6529 = CARTESIAN_POINT('',(4.241577037165,-8.288834701371E-02));+#6530 = CARTESIAN_POINT('',(4.234346790149,-8.815681025564E-02));+#6531 = CARTESIAN_POINT('',(4.227473992418,-9.38738460378E-02));+#6532 = CARTESIAN_POINT('',(4.22095870668,-0.100039419956));+#6533 = CARTESIAN_POINT('',(4.214800961811,-0.106653455167));+#6534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6535 = PCURVE('',#6536,#6543);+#6536 = SURFACE_OF_LINEAR_EXTRUSION('',#6537,#6541);+#6537 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6538,#6539,#6540),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6538 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.1500001));+#6539 = CARTESIAN_POINT('',(-0.221720714912,0.186460547312,2.1500001));+#6540 = CARTESIAN_POINT('',(-0.205226128035,0.179528039784,2.1500001));+#6541 = VECTOR('',#6542,1.);+#6542 = DIRECTION('',(0.,0.,1.));+#6543 = DEFINITIONAL_REPRESENTATION('',(#6544),#6550);+#6544 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6545,#6546,#6547,#6548,#6549),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6545 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6546 = CARTESIAN_POINT('',(0.749999355542,-5.00001E-02));+#6547 = CARTESIAN_POINT('',(0.499997826459,-5.00001E-02));+#6548 = CARTESIAN_POINT('',(0.249997384204,-5.00001E-02));+#6549 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6551 = ORIENTED_EDGE('',*,*,#6552,.T.);+#6552 = EDGE_CURVE('',#6515,#6553,#6555,.T.);+#6553 = VERTEX_POINT('',#6554);+#6554 = CARTESIAN_POINT('',(-0.205226128035,0.135064370809,2.1));+#6555 = SURFACE_CURVE('',#6556,(#6560,#6567),.PCURVE_S1.);+#6556 = LINE('',#6557,#6558);+#6557 = CARTESIAN_POINT('',(-0.205226128035,2.016456610119,2.1));+#6558 = VECTOR('',#6559,1.);+#6559 = DIRECTION('',(0.,-1.,0.));+#6560 = PCURVE('',#5046,#6561);+#6561 = DEFINITIONAL_REPRESENTATION('',(#6562),#6566);+#6562 = LINE('',#6563,#6564);+#6563 = CARTESIAN_POINT('',(2.669069541264,0.866599276841));+#6564 = VECTOR('',#6565,1.);+#6565 = DIRECTION('',(0.856052609391,-0.51688870171));+#6566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6567 = PCURVE('',#6568,#6573);+#6568 = PLANE('',#6569);+#6569 = AXIS2_PLACEMENT_3D('',#6570,#6571,#6572);+#6570 = CARTESIAN_POINT('',(-0.205226128035,0.179528039784,2.1500001));+#6571 = DIRECTION('',(-1.,0.,0.));+#6572 = DIRECTION('',(0.,-1.,0.));+#6573 = DEFINITIONAL_REPRESENTATION('',(#6574),#6577);+#6574 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6575,#6576),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.836928570336,1.88139223931),.PIECEWISE_BEZIER_KNOTS.);+#6575 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6576 = CARTESIAN_POINT('',(4.446366897435E-02,-5.00001E-02));+#6577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6578 = ORIENTED_EDGE('',*,*,#6579,.F.);+#6579 = EDGE_CURVE('',#6580,#6553,#6582,.T.);+#6580 = VERTEX_POINT('',#6581);+#6581 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.1));+#6582 = SURFACE_CURVE('',#6583,(#6589,#6598),.PCURVE_S1.);+#6583 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6584,#6585,#6586,#6587,#6588),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6584 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.1));+#6585 = CARTESIAN_POINT('',(-0.228772848534,0.146240078541,2.1));+#6586 = CARTESIAN_POINT('',(-0.220605185234,0.14321209047,2.1));+#6587 = CARTESIAN_POINT('',(-0.212756248258,0.139486822369,2.1));+#6588 = CARTESIAN_POINT('',(-0.205226128035,0.135064370809,2.1));+#6589 = PCURVE('',#5046,#6590);+#6590 = DEFINITIONAL_REPRESENTATION('',(#6591),#6597);+#6591 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6592,#6593,#6594,#6595,#6596),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6592 = CARTESIAN_POINT('',(4.251520578192,-0.126311694393));+#6593 = CARTESIAN_POINT('',(4.257902249459,-0.120251749609));+#6594 = CARTESIAN_POINT('',(4.264716139428,-0.114824932951));+#6595 = CARTESIAN_POINT('',(4.27196219175,-0.110031378964));+#6596 = CARTESIAN_POINT('',(4.279640277013,-0.105871115143));+#6597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6598 = PCURVE('',#6599,#6606);+#6599 = SURFACE_OF_LINEAR_EXTRUSION('',#6600,#6604);+#6600 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6601,#6602,#6603),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6601 = CARTESIAN_POINT('',(-0.205226128035,0.135064370809,2.1500001));+#6602 = CARTESIAN_POINT('',(-0.22028640301,0.143909294207,2.1500001));+#6603 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.1500001));+#6604 = VECTOR('',#6605,1.);+#6605 = DIRECTION('',(0.,0.,1.));+#6606 = DEFINITIONAL_REPRESENTATION('',(#6607),#6613);+#6607 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6608,#6609,#6610,#6611,#6612),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6608 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6609 = CARTESIAN_POINT('',(0.750002948913,-5.00001E-02));+#6610 = CARTESIAN_POINT('',(0.500001583874,-5.00001E-02));+#6611 = CARTESIAN_POINT('',(0.249999426814,-5.00001E-02));+#6612 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6614 = ORIENTED_EDGE('',*,*,#6615,.F.);+#6615 = EDGE_CURVE('',#6616,#6580,#6618,.T.);+#6616 = VERTEX_POINT('',#6617);+#6617 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.1));+#6618 = SURFACE_CURVE('',#6619,(#6625,#6634),.PCURVE_S1.);+#6619 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6620,#6621,#6622,#6623,#6624),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6620 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.1));+#6621 = CARTESIAN_POINT('',(-0.263435625642,0.153232321573,2.1));+#6622 = CARTESIAN_POINT('',(-0.254471174659,0.152455459957,2.1));+#6623 = CARTESIAN_POINT('',(-0.245745618002,0.150901613818,2.1));+#6624 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.1));+#6625 = PCURVE('',#5046,#6626);+#6626 = DEFINITIONAL_REPRESENTATION('',(#6627),#6633);+#6627 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6628,#6629,#6630,#6631,#6632),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6628 = CARTESIAN_POINT('',(4.229242713352,-0.154189089656));+#6629 = CARTESIAN_POINT('',(4.233999723709,-0.146310698978));+#6630 = CARTESIAN_POINT('',(4.239298381553,-0.139038208314));+#6631 = CARTESIAN_POINT('',(4.245138697247,-0.132371838283));+#6632 = CARTESIAN_POINT('',(4.251520578192,-0.126311694393));+#6633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6634 = PCURVE('',#6635,#6642);+#6635 = SURFACE_OF_LINEAR_EXTRUSION('',#6636,#6640);+#6636 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6637,#6638,#6639),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6637 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.1500001));+#6638 = CARTESIAN_POINT('',(-0.2542317847,0.153232321573,2.1500001));+#6639 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.1500001));+#6640 = VECTOR('',#6641,1.);+#6641 = DIRECTION('',(0.,0.,1.));+#6642 = DEFINITIONAL_REPRESENTATION('',(#6643),#6649);+#6643 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6644,#6645,#6646,#6647,#6648),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6644 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6645 = CARTESIAN_POINT('',(0.750009223894,-5.00001E-02));+#6646 = CARTESIAN_POINT('',(0.500009659798,-5.00001E-02));+#6647 = CARTESIAN_POINT('',(0.250005265061,-5.00001E-02));+#6648 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6650 = ORIENTED_EDGE('',*,*,#6651,.F.);+#6651 = EDGE_CURVE('',#6652,#6616,#6654,.T.);+#6652 = VERTEX_POINT('',#6653);+#6653 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.1));+#6654 = SURFACE_CURVE('',#6655,(#6664,#6676),.PCURVE_S1.);+#6655 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6656,#6657,#6658,#6659,#6660,+ #6661,#6662,#6663),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.394944184389,+ 1.),.UNSPECIFIED.);+#6656 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.1));+#6657 = CARTESIAN_POINT('',(-0.337530482524,0.125509173069,2.1));+#6658 = CARTESIAN_POINT('',(-0.332278703951,0.13143378025,2.1));+#6659 = CARTESIAN_POINT('',(-0.326447482575,0.136460535897,2.1));+#6660 = CARTESIAN_POINT('',(-0.310218491902,0.146913101095,2.1));+#6661 = CARTESIAN_POINT('',(-0.299041694151,0.151128497661,2.1));+#6662 = CARTESIAN_POINT('',(-0.286511590448,0.153232321573,2.1));+#6663 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.1));+#6664 = PCURVE('',#5046,#6665);+#6665 = DEFINITIONAL_REPRESENTATION('',(#6666),#6675);+#6666 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6667,#6668,#6669,#6670,#6671,+ #6672,#6673,#6674),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.394944184389,+ 1.),.UNSPECIFIED.);+#6667 = CARTESIAN_POINT('',(4.222856437182,-0.231594534767));+#6668 = CARTESIAN_POINT('',(4.219433402949,-0.224069576792));+#6669 = CARTESIAN_POINT('',(4.217076212521,-0.216511415526));+#6670 = CARTESIAN_POINT('',(4.215787137679,-0.208921310052));+#6671 = CARTESIAN_POINT('',(4.215227773885,-0.189625627383));+#6672 = CARTESIAN_POINT('',(4.217396333134,-0.177878809645));+#6673 = CARTESIAN_POINT('',(4.22207201822,-0.166064938864));+#6674 = CARTESIAN_POINT('',(4.229242713352,-0.154189089656));+#6675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6676 = PCURVE('',#6677,#6684);+#6677 = SURFACE_OF_LINEAR_EXTRUSION('',#6678,#6682);+#6678 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6679,#6680,#6681),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6679 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.1500001));+#6680 = CARTESIAN_POINT('',(-0.318536768324,0.153232321573,2.1500001));+#6681 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.1500001));+#6682 = VECTOR('',#6683,1.);+#6683 = DIRECTION('',(0.,0.,1.));+#6684 = DEFINITIONAL_REPRESENTATION('',(#6685),#6694);+#6685 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6686,#6687,#6688,#6689,#6690,+ #6691,#6692,#6693),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.394944184389,+ 1.),.UNSPECIFIED.);+#6686 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6687 = CARTESIAN_POINT('',(0.901284473762,-5.00001E-02));+#6688 = CARTESIAN_POINT('',(0.80253451372,-5.00001E-02));+#6689 = CARTESIAN_POINT('',(0.703767267546,-5.00001E-02));+#6690 = CARTESIAN_POINT('',(0.453688214733,-5.00001E-02));+#6691 = CARTESIAN_POINT('',(0.30237631733,-5.00001E-02));+#6692 = CARTESIAN_POINT('',(0.151126506386,-5.00001E-02));+#6693 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6695 = ORIENTED_EDGE('',*,*,#6696,.F.);+#6696 = EDGE_CURVE('',#6697,#6652,#6699,.T.);+#6697 = VERTEX_POINT('',#6698);+#6698 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,2.1));+#6699 = SURFACE_CURVE('',#6700,(#6706,#6715),.PCURVE_S1.);+#6700 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6701,#6702,#6703,#6704,#6705),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6701 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,2.1));+#6702 = CARTESIAN_POINT('',(-0.365869061103,5.045037023859E-02,2.1));+#6703 = CARTESIAN_POINT('',(-0.361950378757,7.862088717188E-02,2.1));+#6704 = CARTESIAN_POINT('',(-0.354061996151,0.101379842573,2.1));+#6705 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.1));+#6706 = PCURVE('',#5046,#6707);+#6707 = DEFINITIONAL_REPRESENTATION('',(#6708),#6714);+#6708 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6709,#6710,#6711,#6712,#6713),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6709 = CARTESIAN_POINT('',(4.297698450681,-0.304430172316));+#6710 = CARTESIAN_POINT('',(4.26903979588,-0.287125938078));+#6711 = CARTESIAN_POINT('',(4.246949873982,-0.269210317906));+#6712 = CARTESIAN_POINT('',(4.231544426667,-0.250693600483));+#6713 = CARTESIAN_POINT('',(4.222856437182,-0.231594534767));+#6714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6715 = PCURVE('',#6716,#6723);+#6716 = SURFACE_OF_LINEAR_EXTRUSION('',#6717,#6721);+#6717 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6718,#6719,#6720),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6718 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.1500001));+#6719 = CARTESIAN_POINT('',(-0.365869061103,8.414629827403E-02,2.1500001+ ));+#6720 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,2.1500001+ ));+#6721 = VECTOR('',#6722,1.);+#6722 = DIRECTION('',(0.,0.,1.));+#6723 = DEFINITIONAL_REPRESENTATION('',(#6724),#6730);+#6724 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6725,#6726,#6727,#6728,#6729),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6725 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6726 = CARTESIAN_POINT('',(0.750812255923,-5.00001E-02));+#6727 = CARTESIAN_POINT('',(0.500910918641,-5.00001E-02));+#6728 = CARTESIAN_POINT('',(0.250549481995,-5.00001E-02));+#6729 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6731 = ORIENTED_EDGE('',*,*,#6732,.F.);+#6732 = EDGE_CURVE('',#6733,#6697,#6735,.T.);+#6733 = VERTEX_POINT('',#6734);+#6734 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,2.1));+#6735 = SURFACE_CURVE('',#6736,(#6745,#6757),.PCURVE_S1.);+#6736 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6737,#6738,#6739,#6740,#6741,+ #6742,#6743,#6744),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.183987394044,+ 1.),.UNSPECIFIED.);+#6737 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,2.1));+#6738 = CARTESIAN_POINT('',(-0.335944516496,5.249056736289E-02,2.1));+#6739 = CARTESIAN_POINT('',(-0.337763994879,5.125123130506E-02,2.1));+#6740 = CARTESIAN_POINT('',(-0.339533571857,4.994916492592E-02,2.1));+#6741 = CARTESIAN_POINT('',(-0.3488802325,4.253131689954E-02,2.1));+#6742 = CARTESIAN_POINT('',(-0.355525480692,3.524443759201E-02,2.1));+#6743 = CARTESIAN_POINT('',(-0.361188300275,2.672427590388E-02,2.1));+#6744 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,2.1));+#6745 = PCURVE('',#5046,#6746);+#6746 = DEFINITIONAL_REPRESENTATION('',(#6747),#6756);+#6747 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6748,#6749,#6750,#6751,#6752,+ #6753,#6754,#6755),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.183987394044,+ 1.),.UNSPECIFIED.);+#6748 = CARTESIAN_POINT('',(4.282719960598,-0.258245947543));+#6749 = CARTESIAN_POINT('',(4.28276093882,-0.260454398739));+#6750 = CARTESIAN_POINT('',(4.282881407867,-0.262652566762));+#6751 = CARTESIAN_POINT('',(4.283081370841,-0.264840441152));+#6752 = CARTESIAN_POINT('',(4.284600255715,-0.276675876221));+#6753 = CARTESIAN_POINT('',(4.28740335405,-0.28613106386));+#6754 = CARTESIAN_POINT('',(4.291770013233,-0.295382710654));+#6755 = CARTESIAN_POINT('',(4.297698450681,-0.304430172316));+#6756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6757 = PCURVE('',#6758,#6765);+#6758 = SURFACE_OF_LINEAR_EXTRUSION('',#6759,#6763);+#6759 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6760,#6761,#6762),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6760 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,2.1500001+ ));+#6761 = CARTESIAN_POINT('',(-0.354394565884,4.087788921835E-02,2.1500001+ ));+#6762 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,2.1500001+ ));+#6763 = VECTOR('',#6764,1.);+#6764 = DIRECTION('',(0.,0.,1.));+#6765 = DEFINITIONAL_REPRESENTATION('',(#6766),#6775);+#6766 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6767,#6768,#6769,#6770,#6771,+ #6772,#6773,#6774),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.183987394044,+ 1.),.UNSPECIFIED.);+#6767 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6768 = CARTESIAN_POINT('',(0.954000425308,-5.00001E-02));+#6769 = CARTESIAN_POINT('',(0.908000427729,-5.00001E-02));+#6770 = CARTESIAN_POINT('',(0.862000216277,-5.00001E-02));+#6771 = CARTESIAN_POINT('',(0.611981911949,-5.00001E-02));+#6772 = CARTESIAN_POINT('',(0.407963726014,-5.00001E-02));+#6773 = CARTESIAN_POINT('',(0.203963692469,-5.00001E-02));+#6774 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6776 = ORIENTED_EDGE('',*,*,#6777,.F.);+#6777 = EDGE_CURVE('',#6778,#6733,#6780,.T.);+#6778 = VERTEX_POINT('',#6779);+#6779 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,2.1));+#6780 = SURFACE_CURVE('',#6781,(#6787,#6796),.PCURVE_S1.);+#6781 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6782,#6783,#6784,#6785,#6786),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6782 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,2.1));+#6783 = CARTESIAN_POINT('',(-0.300605490152,6.645645147779E-02,2.1));+#6784 = CARTESIAN_POINT('',(-0.312758027341,6.432567630328E-02,2.1));+#6785 = CARTESIAN_POINT('',(-0.3239149455,6.006212087222E-02,2.1));+#6786 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,2.1));+#6787 = PCURVE('',#5046,#6788);+#6788 = DEFINITIONAL_REPRESENTATION('',(#6789),#6795);+#6789 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6790,#6791,#6792,#6793,#6794),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6790 = CARTESIAN_POINT('',(4.295866500669,-0.211730303106));+#6791 = CARTESIAN_POINT('',(4.289071750727,-0.222983525316));+#6792 = CARTESIAN_POINT('',(4.284614297205,-0.2344881101));+#6793 = CARTESIAN_POINT('',(4.282497240015,-0.246242802635));+#6794 = CARTESIAN_POINT('',(4.282719960598,-0.258245947543));+#6795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6796 = PCURVE('',#6797,#6804);+#6797 = SURFACE_OF_LINEAR_EXTRUSION('',#6798,#6802);+#6798 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6799,#6800,#6801),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6799 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,2.1500001+ ));+#6800 = CARTESIAN_POINT('',(-0.31375572865,6.645645147779E-02,2.1500001)+ );+#6801 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,2.1500001+ ));+#6802 = VECTOR('',#6803,1.);+#6803 = DIRECTION('',(0.,0.,1.));+#6804 = DEFINITIONAL_REPRESENTATION('',(#6805),#6811);+#6805 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6806,#6807,#6808,#6809,#6810),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6806 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6807 = CARTESIAN_POINT('',(0.750045242957,-5.00001E-02));+#6808 = CARTESIAN_POINT('',(0.500038256705,-5.00001E-02));+#6809 = CARTESIAN_POINT('',(0.250012117932,-5.00001E-02));+#6810 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6812 = ORIENTED_EDGE('',*,*,#6813,.F.);+#6813 = EDGE_CURVE('',#6814,#6778,#6816,.T.);+#6814 = VERTEX_POINT('',#6815);+#6815 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.1));+#6816 = SURFACE_CURVE('',#6817,(#6826,#6838),.PCURVE_S1.);+#6817 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6818,#6819,#6820,#6821,#6822,+ #6823,#6824,#6825),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219902681755,+ 1.),.UNSPECIFIED.);+#6818 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.1));+#6819 = CARTESIAN_POINT('',(-0.210612851919,3.826589679921E-02,2.1));+#6820 = CARTESIAN_POINT('',(-0.213916869857,4.149462250741E-02,2.1));+#6821 = CARTESIAN_POINT('',(-0.217409106014,4.446795345461E-02,2.1));+#6822 = CARTESIAN_POINT('',(-0.234145021101,5.682705902261E-02,2.1));+#6823 = CARTESIAN_POINT('',(-0.249567030861,6.325263033167E-02,2.1));+#6824 = CARTESIAN_POINT('',(-0.26734720266,6.645645147779E-02,2.1));+#6825 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,2.1));+#6826 = PCURVE('',#5046,#6827);+#6827 = DEFINITIONAL_REPRESENTATION('',(#6828),#6837);+#6828 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6829,#6830,#6831,#6832,#6833,+ #6834,#6835,#6836),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219902681755,+ 1.),.UNSPECIFIED.);+#6829 = CARTESIAN_POINT('',(4.364313356687,-0.159649996911));+#6830 = CARTESIAN_POINT('',(4.359720526559,-0.160516471739));+#6831 = CARTESIAN_POINT('',(4.35524875795,-0.161675993076));+#6832 = CARTESIAN_POINT('',(4.35089833282,-0.163128649778));+#6833 = CARTESIAN_POINT('',(4.331667682828,-0.171067191528));+#6834 = CARTESIAN_POINT('',(4.318195593139,-0.180947938013));+#6835 = CARTESIAN_POINT('',(4.30626258377,-0.194512681524));+#6836 = CARTESIAN_POINT('',(4.295866500669,-0.211730303106));+#6837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6838 = PCURVE('',#6839,#6846);+#6839 = SURFACE_OF_LINEAR_EXTRUSION('',#6840,#6844);+#6840 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6841,#6842,#6843),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6841 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,2.1500001+ ));+#6842 = CARTESIAN_POINT('',(-0.235824781953,6.645645147779E-02,2.1500001+ ));+#6843 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.1500001)+ );+#6844 = VECTOR('',#6845,1.);+#6845 = DIRECTION('',(0.,0.,1.));+#6846 = DEFINITIONAL_REPRESENTATION('',(#6847),#6856);+#6847 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6848,#6849,#6850,#6851,#6852,+ #6853,#6854,#6855),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219902681755,+ 1.),.UNSPECIFIED.);+#6848 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6849 = CARTESIAN_POINT('',(0.945005517026,-5.00001E-02));+#6850 = CARTESIAN_POINT('',(0.890005540553,-5.00001E-02));+#6851 = CARTESIAN_POINT('',(0.835002792465,-5.00001E-02));+#6852 = CARTESIAN_POINT('',(0.584879455968,-5.00001E-02));+#6853 = CARTESIAN_POINT('',(0.389758208938,-5.00001E-02));+#6854 = CARTESIAN_POINT('',(0.194758582161,-5.00001E-02));+#6855 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6857 = ORIENTED_EDGE('',*,*,#6858,.F.);+#6858 = EDGE_CURVE('',#6859,#6814,#6861,.T.);+#6859 = VERTEX_POINT('',#6860);+#6860 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,2.1));+#6861 = SURFACE_CURVE('',#6862,(#6868,#6877),.PCURVE_S1.);+#6862 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6863,#6864,#6865,#6866,#6867),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6863 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,2.1));+#6864 = CARTESIAN_POINT('',(-0.179169461808,-2.599650955747E-02,2.1));+#6865 = CARTESIAN_POINT('',(-0.183871401573,-1.337121935071E-03,2.1));+#6866 = CARTESIAN_POINT('',(-0.193318282903,1.892808756118E-02,2.1));+#6867 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.1));+#6868 = PCURVE('',#5046,#6869);+#6869 = DEFINITIONAL_REPRESENTATION('',(#6870),#6876);+#6870 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6871,#6872,#6873,#6874,#6875),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6871 = CARTESIAN_POINT('',(4.455798327582,-0.18179803729));+#6872 = CARTESIAN_POINT('',(4.430985260299,-0.166815787377));+#6873 = CARTESIAN_POINT('',(4.407445147638,-0.158094736328));+#6874 = CARTESIAN_POINT('',(4.385214075943,-0.155706905915));+#6875 = CARTESIAN_POINT('',(4.364313356687,-0.159649996911));+#6876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6877 = PCURVE('',#6878,#6885);+#6878 = SURFACE_OF_LINEAR_EXTRUSION('',#6879,#6883);+#6879 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6880,#6881,#6882),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6880 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.1500001)+ );+#6881 = CARTESIAN_POINT('',(-0.179169461808,3.10767578853E-03,2.1500001)+ );+#6882 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,2.1500001+ ));+#6883 = VECTOR('',#6884,1.);+#6884 = DIRECTION('',(0.,0.,1.));+#6885 = DEFINITIONAL_REPRESENTATION('',(#6886),#6892);+#6886 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6887,#6888,#6889,#6890,#6891),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6887 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6888 = CARTESIAN_POINT('',(0.750511014792,-5.00001E-02));+#6889 = CARTESIAN_POINT('',(0.500518926436,-5.00001E-02));+#6890 = CARTESIAN_POINT('',(0.250264916717,-5.00001E-02));+#6891 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6893 = ORIENTED_EDGE('',*,*,#6894,.F.);+#6894 = EDGE_CURVE('',#6895,#6859,#6897,.T.);+#6895 = VERTEX_POINT('',#6896);+#6896 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.1));+#6897 = SURFACE_CURVE('',#6898,(#6904,#6913),.PCURVE_S1.);+#6898 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6899,#6900,#6901,#6902,#6903),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6899 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.1));+#6900 = CARTESIAN_POINT('',(-0.193737530767,-0.128714119695,2.1));+#6901 = CARTESIAN_POINT('',(-0.184010984195,-0.108450065836,2.1));+#6902 = CARTESIAN_POINT('',(-0.179169461808,-8.385022177448E-02,2.1));+#6903 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,2.1));+#6904 = PCURVE('',#5046,#6905);+#6905 = DEFINITIONAL_REPRESENTATION('',(#6906),#6912);+#6906 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6907,#6908,#6909,#6910,#6911),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6907 = CARTESIAN_POINT('',(4.517464011622,-0.253100474441));+#6908 = CARTESIAN_POINT('',(4.511386868237,-0.232380392969));+#6909 = CARTESIAN_POINT('',(4.499067314083,-0.213579696906));+#6910 = CARTESIAN_POINT('',(4.480511081605,-0.196719717573));+#6911 = CARTESIAN_POINT('',(4.455798327582,-0.18179803729));+#6912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6913 = PCURVE('',#6914,#6921);+#6914 = SURFACE_OF_LINEAR_EXTRUSION('',#6915,#6919);+#6915 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6916,#6917,#6918),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6916 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,2.1500001+ ));+#6917 = CARTESIAN_POINT('',(-0.179169461808,-0.112832536322,2.1500001));+#6918 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.1500001));+#6919 = VECTOR('',#6920,1.);+#6920 = DIRECTION('',(0.,0.,1.));+#6921 = DEFINITIONAL_REPRESENTATION('',(#6922),#6928);+#6922 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6923,#6924,#6925,#6926,#6927),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6923 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6924 = CARTESIAN_POINT('',(0.749758231318,-5.00001E-02));+#6925 = CARTESIAN_POINT('',(0.499508665039,-5.00001E-02));+#6926 = CARTESIAN_POINT('',(0.249507139637,-5.00001E-02));+#6927 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6929 = ORIENTED_EDGE('',*,*,#6930,.F.);+#6930 = EDGE_CURVE('',#6931,#6895,#6933,.T.);+#6931 = VERTEX_POINT('',#6932);+#6932 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.1));+#6933 = SURFACE_CURVE('',#6934,(#6943,#6955),.PCURVE_S1.);+#6934 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6935,#6936,#6937,#6938,#6939,+ #6940,#6941,#6942),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798098700885,+ 1.),.UNSPECIFIED.);+#6935 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.1));+#6936 = CARTESIAN_POINT('',(-0.26927699011,-0.176420363995,2.1));+#6937 = CARTESIAN_POINT('',(-0.250702836469,-0.173054834743,2.1));+#6938 = CARTESIAN_POINT('',(-0.234634778075,-0.166303763003,2.1));+#6939 = CARTESIAN_POINT('',(-0.217653286155,-0.153611234493,2.1));+#6940 = CARTESIAN_POINT('',(-0.214385663567,-0.150832360026,2.1));+#6941 = CARTESIAN_POINT('',(-0.211279148542,-0.147837358745,2.1));+#6942 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.1));+#6943 = PCURVE('',#5046,#6944);+#6944 = DEFINITIONAL_REPRESENTATION('',(#6945),#6954);+#6945 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6946,#6947,#6948,#6949,#6950,+ #6951,#6952,#6953),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798098700885,+ 1.),.UNSPECIFIED.);+#6946 = CARTESIAN_POINT('',(4.502299073081,-0.339726277824));+#6947 = CARTESIAN_POINT('',(4.513180430086,-0.321704962932));+#6948 = CARTESIAN_POINT('',(4.519900130149,-0.304064906194));+#6949 = CARTESIAN_POINT('',(4.522426255412,-0.286820250172));+#6950 = CARTESIAN_POINT('',(4.520338324573,-0.265722575119));+#6951 = CARTESIAN_POINT('',(4.519648459031,-0.261488949461));+#6952 = CARTESIAN_POINT('',(4.518690302888,-0.257281526843));+#6953 = CARTESIAN_POINT('',(4.517464011622,-0.253100474441));+#6954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6955 = PCURVE('',#6956,#6963);+#6956 = SURFACE_OF_LINEAR_EXTRUSION('',#6957,#6961);+#6957 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6958,#6959,#6960),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6958 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.1500001));+#6959 = CARTESIAN_POINT('',(-0.237498145839,-0.176420363995,2.1500001));+#6960 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.1500001));+#6961 = VECTOR('',#6962,1.);+#6962 = DIRECTION('',(0.,0.,1.));+#6963 = DEFINITIONAL_REPRESENTATION('',(#6964),#6973);+#6964 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6965,#6966,#6967,#6968,#6969,+ #6970,#6971,#6972),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798098700885,+ 1.),.UNSPECIFIED.);+#6965 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6966 = CARTESIAN_POINT('',(0.800762355514,-5.00001E-02));+#6967 = CARTESIAN_POINT('',(0.601262760978,-5.00001E-02));+#6968 = CARTESIAN_POINT('',(0.401630949104,-5.00001E-02));+#6969 = CARTESIAN_POINT('',(0.151497790282,-5.00001E-02));+#6970 = CARTESIAN_POINT('',(0.100995625198,-5.00001E-02));+#6971 = CARTESIAN_POINT('',(5.049564836209E-02,-5.00001E-02));+#6972 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6974 = ORIENTED_EDGE('',*,*,#6975,.F.);+#6975 = EDGE_CURVE('',#6976,#6931,#6978,.T.);+#6976 = VERTEX_POINT('',#6977);+#6977 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.1));+#6978 = SURFACE_CURVE('',#6979,(#6988,#7000),.PCURVE_S1.);+#6979 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6980,#6981,#6982,#6983,#6984,+ #6985,#6986,#6987),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.331848251819,+ 1.),.UNSPECIFIED.);+#6980 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.1));+#6981 = CARTESIAN_POINT('',(-0.376608000134,-0.139234652861,2.1));+#6982 = CARTESIAN_POINT('',(-0.371196528494,-0.145817173425,2.1));+#6983 = CARTESIAN_POINT('',(-0.365172863579,-0.151581419075,2.1));+#6984 = CARTESIAN_POINT('',(-0.345180701405,-0.166482366427,2.1));+#6985 = CARTESIAN_POINT('',(-0.329347157614,-0.173116729835,2.1));+#6986 = CARTESIAN_POINT('',(-0.311050257528,-0.176420363995,2.1));+#6987 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.1));+#6988 = PCURVE('',#5046,#6989);+#6989 = DEFINITIONAL_REPRESENTATION('',(#6990),#6999);+#6990 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6991,#6992,#6993,#6994,#6995,+ #6996,#6997,#6998),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.331848251819,+ 1.),.UNSPECIFIED.);+#6991 = CARTESIAN_POINT('',(4.417055907011,-0.394649977427));+#6992 = CARTESIAN_POINT('',(4.425869318613,-0.394365080181));+#6993 = CARTESIAN_POINT('',(4.434301431069,-0.393135006271));+#6994 = CARTESIAN_POINT('',(4.442349492937,-0.390957905653));+#6995 = CARTESIAN_POINT('',(4.46543921055,-0.381545694388));+#6996 = CARTESIAN_POINT('',(4.47930275455,-0.371420575398));+#6997 = CARTESIAN_POINT('',(4.491588300124,-0.357465077508));+#6998 = CARTESIAN_POINT('',(4.502299073081,-0.339726277824));+#6999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7000 = PCURVE('',#7001,#7008);+#7001 = SURFACE_OF_LINEAR_EXTRUSION('',#7002,#7006);+#7002 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7003,#7004,#7005),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7003 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.1500001));+#7004 = CARTESIAN_POINT('',(-0.352482150014,-0.176420363995,2.1500001));+#7005 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.1500001));+#7006 = VECTOR('',#7007,1.);+#7007 = DIRECTION('',(0.,0.,1.));+#7008 = DEFINITIONAL_REPRESENTATION('',(#7009),#7018);+#7009 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7010,#7011,#7012,#7013,#7014,+ #7015,#7016,#7017),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.331848251819,+ 1.),.UNSPECIFIED.);+#7010 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7011 = CARTESIAN_POINT('',(0.917037307022,-5.00001E-02));+#7012 = CARTESIAN_POINT('',(0.834037344787,-5.00001E-02));+#7013 = CARTESIAN_POINT('',(0.751018669357,-5.00001E-02));+#7014 = CARTESIAN_POINT('',(0.500848090178,-5.00001E-02));+#7015 = CARTESIAN_POINT('',(0.333695920914,-5.00001E-02));+#7016 = CARTESIAN_POINT('',(0.166697113005,-5.00001E-02));+#7017 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7019 = ORIENTED_EDGE('',*,*,#7020,.F.);+#7020 = EDGE_CURVE('',#7021,#6976,#7023,.T.);+#7021 = VERTEX_POINT('',#7022);+#7022 = CARTESIAN_POINT('',(-0.410332730078,8.60587141439E-03,2.1));+#7023 = SURFACE_CURVE('',#7024,(#7031,#7041),.PCURVE_S1.);+#7024 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#7025,#7026,#7027,#7028,#7029,+ #7030),.UNSPECIFIED.,.F.,.F.,(6,6),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#7025 = CARTESIAN_POINT('',(-0.410332730078,8.605871414389E-03,2.1));+#7026 = CARTESIAN_POINT('',(-0.410332730078,-2.945860698544E-02,2.1));+#7027 = CARTESIAN_POINT('',(-0.407482210921,-6.264931986112E-02,2.1));+#7028 = CARTESIAN_POINT('',(-0.401727422163,-9.083293817089E-02,2.1));+#7029 = CARTESIAN_POINT('',(-0.393036912296,-0.113912403949,2.1));+#7030 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.1));+#7031 = PCURVE('',#5046,#7032);+#7032 = DEFINITIONAL_REPRESENTATION('',(#7033),#7040);+#7033 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#7034,#7035,#7036,#7037,#7038,+ #7039),.UNSPECIFIED.,.F.,.F.,(6,6),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#7034 = CARTESIAN_POINT('',(4.281878120158,-0.346818126598));+#7035 = CARTESIAN_POINT('',(4.314463316217,-0.366493225419));+#7036 = CARTESIAN_POINT('',(4.344349713728,-0.381208935544));+#7037 = CARTESIAN_POINT('',(4.371450959014,-0.390850327489));+#7038 = CARTESIAN_POINT('',(4.395700222279,-0.395340308942));+#7039 = CARTESIAN_POINT('',(4.417055907011,-0.394649977427));+#7040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7041 = PCURVE('',#7042,#7049);+#7042 = SURFACE_OF_LINEAR_EXTRUSION('',#7043,#7047);+#7043 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7044,#7045,#7046),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7044 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.1500001));+#7045 = CARTESIAN_POINT('',(-0.410332730078,-8.725397406256E-02,+ 2.1500001));+#7046 = CARTESIAN_POINT('',(-0.410332730078,8.60587141439E-03,2.1500001)+ );+#7047 = VECTOR('',#7048,1.);+#7048 = DIRECTION('',(0.,0.,1.));+#7049 = DEFINITIONAL_REPRESENTATION('',(#7050),#7057);+#7050 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#7051,#7052,#7053,#7054,#7055,+ #7056),.UNSPECIFIED.,.F.,.F.,(6,6),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#7051 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7052 = CARTESIAN_POINT('',(0.801457647827,-5.00001E-02));+#7053 = CARTESIAN_POINT('',(0.601979410949,-5.00001E-02));+#7054 = CARTESIAN_POINT('',(0.401763725756,-5.00001E-02));+#7055 = CARTESIAN_POINT('',(0.201026026658,-5.00001E-02));+#7056 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7058 = ORIENTED_EDGE('',*,*,#7059,.F.);+#7059 = EDGE_CURVE('',#7060,#7021,#7062,.T.);+#7060 = VERTEX_POINT('',#7061);+#7061 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.1));+#7062 = SURFACE_CURVE('',#7063,(#7069,#7078),.PCURVE_S1.);+#7063 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7064,#7065,#7066,#7067,#7068),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7064 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.1));+#7065 = CARTESIAN_POINT('',(-0.39300474442,0.122607419224,2.1));+#7066 = CARTESIAN_POINT('',(-0.404600397573,9.161727074682E-02,2.1));+#7067 = CARTESIAN_POINT('',(-0.410332730078,5.353547614368E-02,2.1));+#7068 = CARTESIAN_POINT('',(-0.410332730078,8.605871414389E-03,2.1));+#7069 = PCURVE('',#5046,#7070);+#7070 = DEFINITIONAL_REPRESENTATION('',(#7071),#7077);+#7071 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7072,#7073,#7074,#7075,#7076),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7072 = CARTESIAN_POINT('',(4.181880996449,-0.24580862539));+#7073 = CARTESIAN_POINT('',(4.19324343769,-0.27305834722));+#7074 = CARTESIAN_POINT('',(4.213778973056,-0.299003293971));+#7075 = CARTESIAN_POINT('',(4.24341601479,-0.323594521541));+#7076 = CARTESIAN_POINT('',(4.281878120158,-0.346818126598));+#7077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7078 = PCURVE('',#7079,#7086);+#7079 = SURFACE_OF_LINEAR_EXTRUSION('',#7080,#7084);+#7080 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7081,#7082,#7083),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7081 = CARTESIAN_POINT('',(-0.410332730078,8.60587141439E-03,2.1500001)+ );+#7082 = CARTESIAN_POINT('',(-0.410332730078,9.896752126548E-02,2.1500001+ ));+#7083 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.1500001));+#7084 = VECTOR('',#7085,1.);+#7085 = DIRECTION('',(0.,0.,1.));+#7086 = DEFINITIONAL_REPRESENTATION('',(#7087),#7093);+#7087 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7088,#7089,#7090,#7091,#7092),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7088 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7089 = CARTESIAN_POINT('',(0.74909369726,-5.00001E-02));+#7090 = CARTESIAN_POINT('',(0.498459501957,-5.00001E-02));+#7091 = CARTESIAN_POINT('',(0.248609918053,-5.00001E-02));+#7092 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7094 = ORIENTED_EDGE('',*,*,#7095,.F.);+#7095 = EDGE_CURVE('',#7096,#7060,#7098,.T.);+#7096 = VERTEX_POINT('',#7097);+#7097 = CARTESIAN_POINT('',(-0.274790255301,0.193871158808,2.1));+#7098 = SURFACE_CURVE('',#7099,(#7108,#7120),.PCURVE_S1.);+#7099 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7100,#7101,#7102,#7103,#7104,+ #7105,#7106,#7107),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639134839219,+ 1.),.UNSPECIFIED.);+#7100 = CARTESIAN_POINT('',(-0.274790255301,0.193871158807,2.1));+#7101 = CARTESIAN_POINT('',(-0.295833981126,0.193871158807,2.1));+#7102 = CARTESIAN_POINT('',(-0.314798266275,0.190653053041,2.1));+#7103 = CARTESIAN_POINT('',(-0.331648751547,0.184191735816,2.1));+#7104 = CARTESIAN_POINT('',(-0.35468572769,0.169020991701,2.1));+#7105 = CARTESIAN_POINT('',(-0.362320994981,0.162515167854,2.1));+#7106 = CARTESIAN_POINT('',(-0.369275986088,0.154979642791,2.1));+#7107 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.1));+#7108 = PCURVE('',#5046,#7109);+#7109 = DEFINITIONAL_REPRESENTATION('',(#7110),#7119);+#7110 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7111,#7112,#7113,#7114,#7115,+ #7116,#7117,#7118),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639134839219,+ 1.),.UNSPECIFIED.);+#7111 = CARTESIAN_POINT('',(4.193341661269,-0.135025103509));+#7112 = CARTESIAN_POINT('',(4.182464397149,-0.153039639913));+#7113 = CARTESIAN_POINT('',(4.175416840258,-0.170937468212));+#7114 = CARTESIAN_POINT('',(4.172238242273,-0.18870215197));+#7115 = CARTESIAN_POINT('',(4.173317644669,-0.216264601739));+#7116 = CARTESIAN_POINT('',(4.174940388751,-0.226163579069));+#7117 = CARTESIAN_POINT('',(4.177796238322,-0.236012445121));+#7118 = CARTESIAN_POINT('',(4.181880996449,-0.24580862539));+#7119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7120 = PCURVE('',#7121,#7128);+#7121 = SURFACE_OF_LINEAR_EXTRUSION('',#7122,#7126);+#7122 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7123,#7124,#7125),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7123 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.1500001));+#7124 = CARTESIAN_POINT('',(-0.340768602811,0.193871158808,2.1500001));+#7125 = CARTESIAN_POINT('',(-0.274790255301,0.193871158808,2.1500001));+#7126 = VECTOR('',#7127,1.);+#7127 = DIRECTION('',(0.,0.,1.));+#7128 = DEFINITIONAL_REPRESENTATION('',(#7129),#7138);+#7129 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7130,#7131,#7132,#7133,#7134,+ #7135,#7136,#7137),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639134839219,+ 1.),.UNSPECIFIED.);+#7130 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7131 = CARTESIAN_POINT('',(0.840525516184,-5.00001E-02));+#7132 = CARTESIAN_POINT('',(0.680776389617,-5.00001E-02));+#7133 = CARTESIAN_POINT('',(0.520887921876,-5.00001E-02));+#7134 = CARTESIAN_POINT('',(0.270724870099,-5.00001E-02));+#7135 = CARTESIAN_POINT('',(0.180449830904,-5.00001E-02));+#7136 = CARTESIAN_POINT('',(9.019994360362E-02,-5.00001E-02));+#7137 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7139 = ORIENTED_EDGE('',*,*,#7140,.F.);+#7140 = EDGE_CURVE('',#6517,#7096,#7141,.T.);+#7141 = SURFACE_CURVE('',#7142,(#7148,#7157),.PCURVE_S1.);+#7142 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7143,#7144,#7145,#7146,#7147),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7143 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.1));+#7144 = CARTESIAN_POINT('',(-0.248255323403,0.192018472063,2.1));+#7145 = CARTESIAN_POINT('',(-0.257100246795,0.193253596558,2.1));+#7146 = CARTESIAN_POINT('',(-0.265945251049,0.193871158807,2.1));+#7147 = CARTESIAN_POINT('',(-0.274790255301,0.193871158807,2.1));+#7148 = PCURVE('',#5046,#7149);+#7149 = DEFINITIONAL_REPRESENTATION('',(#7150),#7156);+#7150 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7151,#7152,#7153,#7154,#7155),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7151 = CARTESIAN_POINT('',(4.214800961811,-0.106653455167));+#7152 = CARTESIAN_POINT('',(4.208643265089,-0.113267438664));+#7153 = CARTESIAN_POINT('',(4.203014092574,-0.120200736516));+#7154 = CARTESIAN_POINT('',(4.197913544034,-0.127453314539));+#7155 = CARTESIAN_POINT('',(4.193341661269,-0.135025103509));+#7156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7157 = PCURVE('',#7158,#7165);+#7158 = SURFACE_OF_LINEAR_EXTRUSION('',#7159,#7163);+#7159 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7160,#7161,#7162),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7160 = CARTESIAN_POINT('',(-0.274790255301,0.193871158808,2.1500001));+#7161 = CARTESIAN_POINT('',(-0.257100408505,0.193871158808,2.1500001));+#7162 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.1500001));+#7163 = VECTOR('',#7164,1.);+#7164 = DIRECTION('',(0.,0.,1.));+#7165 = DEFINITIONAL_REPRESENTATION('',(#7166),#7172);+#7166 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7167,#7168,#7169,#7170,#7171),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7167 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7168 = CARTESIAN_POINT('',(0.750004570513,-5.00001E-02));+#7169 = CARTESIAN_POINT('',(0.500004570702,-5.00001E-02));+#7170 = CARTESIAN_POINT('',(0.250002285321,-5.00001E-02));+#7171 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7173 = FACE_BOUND('',#7174,.T.);+#7174 = EDGE_LOOP('',(#7175,#7204,#7231,#7258,#7285,#7312,#7339,#7366,+ #7393,#7420,#7447));+#7175 = ORIENTED_EDGE('',*,*,#7176,.T.);+#7176 = EDGE_CURVE('',#7177,#7179,#7181,.T.);+#7177 = VERTEX_POINT('',#7178);+#7178 = CARTESIAN_POINT('',(0.114147322233,-0.169487856467,2.1));+#7179 = VERTEX_POINT('',#7180);+#7180 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.169487856467,2.1));+#7181 = SURFACE_CURVE('',#7182,(#7186,#7193),.PCURVE_S1.);+#7182 = LINE('',#7183,#7184);+#7183 = CARTESIAN_POINT('',(-1.106272633998,-0.169487856467,2.1));+#7184 = VECTOR('',#7185,1.);+#7185 = DIRECTION('',(-1.,0.,0.));+#7186 = PCURVE('',#5046,#7187);+#7187 = DEFINITIONAL_REPRESENTATION('',(#7188),#7192);+#7188 = LINE('',#7189,#7190);+#7189 = CARTESIAN_POINT('',(4.074612247221,-1.034633933115));+#7190 = VECTOR('',#7191,1.);+#7191 = DIRECTION('',(-0.51688870171,-0.856052609391));+#7192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7193 = PCURVE('',#7194,#7199);+#7194 = PLANE('',#7195);+#7195 = AXIS2_PLACEMENT_3D('',#7196,#7197,#7198);+#7196 = CARTESIAN_POINT('',(0.114147322233,-0.169487856467,2.1500001));+#7197 = DIRECTION('',(0.,1.,0.));+#7198 = DIRECTION('',(-1.,0.,0.));+#7199 = DEFINITIONAL_REPRESENTATION('',(#7200),#7203);+#7200 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7201,#7202),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.22041995623,-1.023441121634),.PIECEWISE_BEZIER_KNOTS.);+#7201 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7202 = CARTESIAN_POINT('',(0.196978834596,-5.00001E-02));+#7203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7204 = ORIENTED_EDGE('',*,*,#7205,.T.);+#7205 = EDGE_CURVE('',#7179,#7206,#7208,.T.);+#7206 = VERTEX_POINT('',#7207);+#7207 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.128849019232,2.1));+#7208 = SURFACE_CURVE('',#7209,(#7213,#7220),.PCURVE_S1.);+#7209 = LINE('',#7210,#7211);+#7210 = CARTESIAN_POINT('',(-8.28315123635E-02,1.841948661994,2.1));+#7211 = VECTOR('',#7212,1.);+#7212 = DIRECTION('',(0.,1.,0.));+#7213 = PCURVE('',#5046,#7214);+#7214 = DEFINITIONAL_REPRESENTATION('',(#7215),#7219);+#7215 = LINE('',#7216,#7217);+#7216 = CARTESIAN_POINT('',(2.881721919607,0.881174320217));+#7217 = VECTOR('',#7218,1.);+#7218 = DIRECTION('',(-0.856052609391,0.51688870171));+#7219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7220 = PCURVE('',#7221,#7226);+#7221 = PLANE('',#7222);+#7222 = AXIS2_PLACEMENT_3D('',#7223,#7224,#7225);+#7223 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.169487856467,2.1500001+ ));+#7224 = DIRECTION('',(1.,0.,0.));+#7225 = DIRECTION('',(0.,1.,0.));+#7226 = DEFINITIONAL_REPRESENTATION('',(#7227),#7230);+#7227 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7228,#7229),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-2.011436518461,-1.970797681226),.PIECEWISE_BEZIER_KNOTS.);+#7228 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7229 = CARTESIAN_POINT('',(4.063883723462E-02,-5.00001E-02));+#7230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7231 = ORIENTED_EDGE('',*,*,#7232,.T.);+#7232 = EDGE_CURVE('',#7206,#7233,#7235,.T.);+#7233 = VERTEX_POINT('',#7234);+#7234 = CARTESIAN_POINT('',(-7.769189471324E-03,-0.128849019232,2.1));+#7235 = SURFACE_CURVE('',#7236,(#7240,#7247),.PCURVE_S1.);+#7236 = LINE('',#7237,#7238);+#7237 = CARTESIAN_POINT('',(-1.204762051296,-0.128849019232,2.1));+#7238 = VECTOR('',#7239,1.);+#7239 = DIRECTION('',(1.,0.,-0.));+#7240 = PCURVE('',#5046,#7241);+#7241 = DEFINITIONAL_REPRESENTATION('',(#7242),#7246);+#7242 = LINE('',#7243,#7244);+#7243 = CARTESIAN_POINT('',(3.988915197525,-1.097940299973));+#7244 = VECTOR('',#7245,1.);+#7245 = DIRECTION('',(0.51688870171,0.856052609391));+#7246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7247 = PCURVE('',#7248,#7253);+#7248 = PLANE('',#7249);+#7249 = AXIS2_PLACEMENT_3D('',#7250,#7251,#7252);+#7250 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.128849019232,2.1500001+ ));+#7251 = DIRECTION('',(0.,-1.,0.));+#7252 = DIRECTION('',(1.,0.,0.));+#7253 = DEFINITIONAL_REPRESENTATION('',(#7254),#7257);+#7254 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7255,#7256),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.121930538932,1.196992861824),.PIECEWISE_BEZIER_KNOTS.);+#7255 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7256 = CARTESIAN_POINT('',(7.506232289218E-02,-5.00001E-02));+#7257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7258 = ORIENTED_EDGE('',*,*,#7259,.T.);+#7259 = EDGE_CURVE('',#7233,#7260,#7262,.T.);+#7260 = VERTEX_POINT('',#7261);+#7261 = CARTESIAN_POINT('',(-7.769189471324E-03,0.143909294207,2.1));+#7262 = SURFACE_CURVE('',#7263,(#7267,#7274),.PCURVE_S1.);+#7263 = LINE('',#7264,#7265);+#7264 = CARTESIAN_POINT('',(-7.769189471324E-03,1.862268080611,2.1));+#7265 = VECTOR('',#7266,1.);+#7266 = DIRECTION('',(0.,1.,0.));+#7267 = PCURVE('',#5046,#7268);+#7268 = DEFINITIONAL_REPRESENTATION('',(#7269),#7273);+#7269 = LINE('',#7270,#7271);+#7270 = CARTESIAN_POINT('',(2.903126294905,0.955934495505));+#7271 = VECTOR('',#7272,1.);+#7272 = DIRECTION('',(-0.856052609391,0.51688870171));+#7273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7274 = PCURVE('',#7275,#7280);+#7275 = PLANE('',#7276);+#7276 = AXIS2_PLACEMENT_3D('',#7277,#7278,#7279);+#7277 = CARTESIAN_POINT('',(-7.769189471324E-03,-0.128849019232,+ 2.1500001));+#7278 = DIRECTION('',(1.,0.,0.));+#7279 = DIRECTION('',(0.,1.,0.));+#7280 = DEFINITIONAL_REPRESENTATION('',(#7281),#7284);+#7281 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7282,#7283),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.991117099844,-1.718358786404),.PIECEWISE_BEZIER_KNOTS.);+#7282 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7283 = CARTESIAN_POINT('',(0.272758313439,-5.00001E-02));+#7284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7285 = ORIENTED_EDGE('',*,*,#7286,.T.);+#7286 = EDGE_CURVE('',#7260,#7287,#7289,.T.);+#7287 = VERTEX_POINT('',#7288);+#7288 = CARTESIAN_POINT('',(-8.856875997309E-02,0.125741343444,2.1));+#7289 = SURFACE_CURVE('',#7290,(#7294,#7301),.PCURVE_S1.);+#7290 = LINE('',#7291,#7292);+#7291 = CARTESIAN_POINT('',(-0.714460026124,-1.499160397497E-02,2.1));+#7292 = VECTOR('',#7293,1.);+#7293 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#7294 = PCURVE('',#5046,#7295);+#7295 = DEFINITIONAL_REPRESENTATION('',(#7296),#7300);+#7296 = LINE('',#7297,#7298);+#7297 = CARTESIAN_POINT('',(4.144878837332,-0.619364360383));+#7298 = VECTOR('',#7299,1.);+#7299 = DIRECTION('',(-0.31650124281,-0.948592095318));+#7300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7301 = PCURVE('',#7302,#7307);+#7302 = PLANE('',#7303);+#7303 = AXIS2_PLACEMENT_3D('',#7304,#7305,#7306);+#7304 = CARTESIAN_POINT('',(-7.769189471324E-03,0.143909294207,2.1500001+ ));+#7305 = DIRECTION('',(-0.219374821819,0.97564065493,0.));+#7306 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#7307 = DEFINITIONAL_REPRESENTATION('',(#7308),#7311);+#7308 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7309,#7310),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.72433516693,-0.641518230086),.PIECEWISE_BEZIER_KNOTS.);+#7309 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7310 = CARTESIAN_POINT('',(8.2816936844E-02,-5.00001E-02));+#7311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7312 = ORIENTED_EDGE('',*,*,#7313,.T.);+#7313 = EDGE_CURVE('',#7287,#7314,#7316,.T.);+#7314 = VERTEX_POINT('',#7315);+#7315 = CARTESIAN_POINT('',(-8.856875997309E-02,0.16972690845,2.1));+#7316 = SURFACE_CURVE('',#7317,(#7321,#7328),.PCURVE_S1.);+#7317 = LINE('',#7318,#7319);+#7318 = CARTESIAN_POINT('',(-8.856875997309E-02,1.989563261949,2.1));+#7319 = VECTOR('',#7320,1.);+#7320 = DIRECTION('',(0.,1.,0.));+#7321 = PCURVE('',#5046,#7322);+#7322 = DEFINITIONAL_REPRESENTATION('',(#7323),#7327);+#7323 = LINE('',#7324,#7325);+#7324 = CARTESIAN_POINT('',(2.752390537663,0.952563253355));+#7325 = VECTOR('',#7326,1.);+#7326 = DIRECTION('',(-0.856052609391,0.51688870171));+#7327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7328 = PCURVE('',#7329,#7334);+#7329 = PLANE('',#7330);+#7330 = AXIS2_PLACEMENT_3D('',#7331,#7332,#7333);+#7331 = CARTESIAN_POINT('',(-8.856875997309E-02,0.125741343444,2.1500001+ ));+#7332 = DIRECTION('',(1.,0.,0.));+#7333 = DIRECTION('',(0.,1.,0.));+#7334 = DEFINITIONAL_REPRESENTATION('',(#7335),#7338);+#7335 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7336,#7337),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.863821918506,-1.819836353499),.PIECEWISE_BEZIER_KNOTS.);+#7336 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7337 = CARTESIAN_POINT('',(4.398556500688E-02,-5.00001E-02));+#7338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7339 = ORIENTED_EDGE('',*,*,#7340,.T.);+#7340 = EDGE_CURVE('',#7314,#7341,#7343,.T.);+#7341 = VERTEX_POINT('',#7342);+#7342 = CARTESIAN_POINT('',(-8.24729343879E-03,0.187416755247,2.1));+#7343 = SURFACE_CURVE('',#7344,(#7348,#7355),.PCURVE_S1.);+#7344 = LINE('',#7345,#7346);+#7345 = CARTESIAN_POINT('',(-0.768986209477,1.987306540497E-02,2.1));+#7346 = VECTOR('',#7347,1.);+#7347 = DIRECTION('',(0.976595648113,0.215083565358,-0.));+#7348 = PCURVE('',#5046,#7349);+#7349 = DEFINITIONAL_REPRESENTATION('',(#7350),#7354);+#7350 = LINE('',#7351,#7352);+#7351 = CARTESIAN_POINT('',(4.086848878011,-0.648020488231));+#7352 = VECTOR('',#7353,1.);+#7353 = DIRECTION('',(0.320668409287,0.947191517744));+#7354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7355 = PCURVE('',#7356,#7361);+#7356 = PLANE('',#7357);+#7357 = AXIS2_PLACEMENT_3D('',#7358,#7359,#7360);+#7358 = CARTESIAN_POINT('',(-8.856875997309E-02,0.16972690845,2.1500001)+ );+#7359 = DIRECTION('',(0.215083565358,-0.976595648113,0.));+#7360 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#7361 = DEFINITIONAL_REPRESENTATION('',(#7362),#7365);+#7362 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7363,#7364),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.69672381893,0.778970208917),.PIECEWISE_BEZIER_KNOTS.);+#7363 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7364 = CARTESIAN_POINT('',(8.224638998701E-02,-5.00001E-02));+#7365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7366 = ORIENTED_EDGE('',*,*,#7367,.T.);+#7367 = EDGE_CURVE('',#7341,#7368,#7370,.T.);+#7368 = VERTEX_POINT('',#7369);+#7369 = CARTESIAN_POINT('',(4.004120727529E-02,0.187416755247,2.1));+#7370 = SURFACE_CURVE('',#7371,(#7375,#7382),.PCURVE_S1.);+#7371 = LINE('',#7372,#7373);+#7372 = CARTESIAN_POINT('',(-1.167469941833,0.187416755247,2.1));+#7373 = VECTOR('',#7374,1.);+#7374 = DIRECTION('',(1.,0.,-0.));+#7375 = PCURVE('',#5046,#7376);+#7376 = DEFINITIONAL_REPRESENTATION('',(#7377),#7381);+#7377 = LINE('',#7378,#7379);+#7378 = CARTESIAN_POINT('',(3.737450926065,-0.902542086792));+#7379 = VECTOR('',#7380,1.);+#7380 = DIRECTION('',(0.51688870171,0.856052609391));+#7381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7382 = PCURVE('',#7383,#7388);+#7383 = PLANE('',#7384);+#7384 = AXIS2_PLACEMENT_3D('',#7385,#7386,#7387);+#7385 = CARTESIAN_POINT('',(-8.24729343879E-03,0.187416755247,2.1500001)+ );+#7386 = DIRECTION('',(0.,-1.,0.));+#7387 = DIRECTION('',(1.,0.,0.));+#7388 = DEFINITIONAL_REPRESENTATION('',(#7389),#7392);+#7389 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7390,#7391),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.159222648395,1.207511149109),.PIECEWISE_BEZIER_KNOTS.);+#7390 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7391 = CARTESIAN_POINT('',(4.828850071408E-02,-5.00001E-02));+#7392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7393 = ORIENTED_EDGE('',*,*,#7394,.T.);+#7394 = EDGE_CURVE('',#7368,#7395,#7397,.T.);+#7395 = VERTEX_POINT('',#7396);+#7396 = CARTESIAN_POINT('',(4.004120727529E-02,-0.128849019232,2.1));+#7397 = SURFACE_CURVE('',#7398,(#7402,#7409),.PCURVE_S1.);+#7398 = LINE('',#7399,#7400);+#7399 = CARTESIAN_POINT('',(4.004120727529E-02,2.020400967851,2.1));+#7400 = VECTOR('',#7401,1.);+#7401 = DIRECTION('',(0.,-1.,0.));+#7402 = PCURVE('',#5046,#7403);+#7403 = DEFINITIONAL_REPRESENTATION('',(#7404),#7408);+#7404 = LINE('',#7405,#7406);+#7405 = CARTESIAN_POINT('',(2.792468878056,1.078599813178));+#7406 = VECTOR('',#7407,1.);+#7407 = DIRECTION('',(0.856052609391,-0.51688870171));+#7408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7409 = PCURVE('',#7410,#7415);+#7410 = PLANE('',#7411);+#7411 = AXIS2_PLACEMENT_3D('',#7412,#7413,#7414);+#7412 = CARTESIAN_POINT('',(4.004120727529E-02,0.187416755247,2.1500001)+ );+#7413 = DIRECTION('',(-1.,0.,0.));+#7414 = DIRECTION('',(0.,-1.,0.));+#7415 = DEFINITIONAL_REPRESENTATION('',(#7416),#7419);+#7416 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7417,#7418),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.832984212604,2.149249987083),.PIECEWISE_BEZIER_KNOTS.);+#7417 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7418 = CARTESIAN_POINT('',(0.316265774479,-5.00001E-02));+#7419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7420 = ORIENTED_EDGE('',*,*,#7421,.T.);+#7421 = EDGE_CURVE('',#7395,#7422,#7424,.T.);+#7422 = VERTEX_POINT('',#7423);+#7423 = CARTESIAN_POINT('',(0.114147322233,-0.128849019232,2.1));+#7424 = SURFACE_CURVE('',#7425,(#7429,#7436),.PCURVE_S1.);+#7425 = LINE('',#7426,#7427);+#7426 = CARTESIAN_POINT('',(-1.143325691476,-0.128849019232,2.1));+#7427 = VECTOR('',#7428,1.);+#7428 = DIRECTION('',(1.,0.,-0.));+#7429 = PCURVE('',#5046,#7430);+#7430 = DEFINITIONAL_REPRESENTATION('',(#7431),#7435);+#7431 = LINE('',#7432,#7433);+#7432 = CARTESIAN_POINT('',(4.020670957789,-1.045347543838));+#7433 = VECTOR('',#7434,1.);+#7434 = DIRECTION('',(0.51688870171,0.856052609391));+#7435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7436 = PCURVE('',#7437,#7442);+#7437 = PLANE('',#7438);+#7438 = AXIS2_PLACEMENT_3D('',#7439,#7440,#7441);+#7439 = CARTESIAN_POINT('',(4.004120727529E-02,-0.128849019232,2.1500001+ ));+#7440 = DIRECTION('',(0.,-1.,0.));+#7441 = DIRECTION('',(1.,0.,0.));+#7442 = DEFINITIONAL_REPRESENTATION('',(#7443),#7446);+#7443 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7444,#7445),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.183366898752,1.257473013709),.PIECEWISE_BEZIER_KNOTS.);+#7444 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7445 = CARTESIAN_POINT('',(7.410611495724E-02,-5.00001E-02));+#7446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7447 = ORIENTED_EDGE('',*,*,#7448,.T.);+#7448 = EDGE_CURVE('',#7422,#7177,#7449,.T.);+#7449 = SURFACE_CURVE('',#7450,(#7454,#7461),.PCURVE_S1.);+#7450 = LINE('',#7451,#7452);+#7451 = CARTESIAN_POINT('',(0.114147322233,1.862268080611,2.1));+#7452 = VECTOR('',#7453,1.);+#7453 = DIRECTION('',(0.,-1.,0.));+#7454 = PCURVE('',#5046,#7455);+#7455 = DEFINITIONAL_REPRESENTATION('',(#7456),#7460);+#7456 = LINE('',#7457,#7458);+#7457 = CARTESIAN_POINT('',(2.966143562357,1.060301443477));+#7458 = VECTOR('',#7459,1.);+#7459 = DIRECTION('',(0.856052609391,-0.51688870171));+#7460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7461 = PCURVE('',#7462,#7467);+#7462 = PLANE('',#7463);+#7463 = AXIS2_PLACEMENT_3D('',#7464,#7465,#7466);+#7464 = CARTESIAN_POINT('',(0.114147322233,-0.128849019232,2.1500001));+#7465 = DIRECTION('',(-1.,0.,0.));+#7466 = DIRECTION('',(0.,-1.,0.));+#7467 = DEFINITIONAL_REPRESENTATION('',(#7468),#7471);+#7468 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7469,#7470),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.991117099844,2.031755937078),.PIECEWISE_BEZIER_KNOTS.);+#7469 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7470 = CARTESIAN_POINT('',(4.063883723462E-02,-5.00001E-02));+#7471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7472 = FACE_BOUND('',#7473,.T.);+#7473 = EDGE_LOOP('',(#7474,#7512,#7539,#7566,#7593,#7620,#7656,#7692,+ #7728,#7764,#7809,#7845,#7881,#7917,#7944,#7980,#8016,#8061,#8106,+ #8142,#8178));+#7474 = ORIENTED_EDGE('',*,*,#7475,.F.);+#7475 = EDGE_CURVE('',#7476,#7478,#7480,.T.);+#7476 = VERTEX_POINT('',#7477);+#7477 = CARTESIAN_POINT('',(0.236541937904,-0.128849019232,2.1));+#7478 = VERTEX_POINT('',#7479);+#7479 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,2.1));+#7480 = SURFACE_CURVE('',#7481,(#7487,#7496),.PCURVE_S1.);+#7481 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7482,#7483,#7484,#7485,#7486),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7482 = CARTESIAN_POINT('',(0.236541937904,-0.128849019232,2.1));+#7483 = CARTESIAN_POINT('',(0.262476129289,-0.10160622186,2.1));+#7484 = CARTESIAN_POINT('',(0.284106709966,-7.876080972337E-02,2.1));+#7485 = CARTESIAN_POINT('',(0.301336512205,-6.041275521573E-02,2.1));+#7486 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,2.1));+#7487 = PCURVE('',#5046,#7488);+#7488 = DEFINITIONAL_REPRESENTATION('',(#7489),#7495);+#7489 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7490,#7491,#7492,#7493,#7494),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7490 = CARTESIAN_POINT('',(4.733908945271,0.135891740907));+#7491 = CARTESIAN_POINT('',(4.723992768008,0.172174267279));+#7492 = CARTESIAN_POINT('',(4.7156164961,0.20249971773));+#7493 = CARTESIAN_POINT('',(4.708815486271,0.226733236969));+#7494 = CARTESIAN_POINT('',(4.703608696616,0.24480353428));+#7495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7496 = PCURVE('',#7497,#7504);+#7497 = SURFACE_OF_LINEAR_EXTRUSION('',#7498,#7502);+#7498 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7499,#7500,#7501),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7499 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,2.1500001+ ));+#7500 = CARTESIAN_POINT('',(0.288655270358,-7.410611495724E-02,2.1500001+ ));+#7501 = CARTESIAN_POINT('',(0.236541937904,-0.128849019232,2.1500001));+#7502 = VECTOR('',#7503,1.);+#7503 = DIRECTION('',(0.,0.,1.));+#7504 = DEFINITIONAL_REPRESENTATION('',(#7505),#7511);+#7505 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7506,#7507,#7508,#7509,#7510),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7506 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7507 = CARTESIAN_POINT('',(0.751175081654,-5.00001E-02));+#7508 = CARTESIAN_POINT('',(0.501419712284,-5.00001E-02));+#7509 = CARTESIAN_POINT('',(0.250948116922,-5.00001E-02));+#7510 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7512 = ORIENTED_EDGE('',*,*,#7513,.T.);+#7513 = EDGE_CURVE('',#7476,#7514,#7516,.T.);+#7514 = VERTEX_POINT('',#7515);+#7515 = CARTESIAN_POINT('',(0.400531598745,-0.128849019232,2.1));+#7516 = SURFACE_CURVE('',#7517,(#7521,#7528),.PCURVE_S1.);+#7517 = LINE('',#7518,#7519);+#7518 = CARTESIAN_POINT('',(-1.045075326162,-0.128849019232,2.1));+#7519 = VECTOR('',#7520,1.);+#7520 = DIRECTION('',(1.,0.,-0.));+#7521 = PCURVE('',#5046,#7522);+#7522 = DEFINITIONAL_REPRESENTATION('',(#7523),#7527);+#7523 = LINE('',#7524,#7525);+#7524 = CARTESIAN_POINT('',(4.071455461559,-0.961240062237));+#7525 = VECTOR('',#7526,1.);+#7526 = DIRECTION('',(0.51688870171,0.856052609391));+#7527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7528 = PCURVE('',#7529,#7534);+#7529 = PLANE('',#7530);+#7530 = AXIS2_PLACEMENT_3D('',#7531,#7532,#7533);+#7531 = CARTESIAN_POINT('',(0.236541937904,-0.128849019232,2.1500001));+#7532 = DIRECTION('',(0.,-1.,0.));+#7533 = DIRECTION('',(1.,0.,0.));+#7534 = DEFINITIONAL_REPRESENTATION('',(#7535),#7538);+#7535 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7536,#7537),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.281617264066,1.445606924907),.PIECEWISE_BEZIER_KNOTS.);+#7536 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7537 = CARTESIAN_POINT('',(0.163989660841,-5.00001E-02));+#7538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7539 = ORIENTED_EDGE('',*,*,#7540,.T.);+#7540 = EDGE_CURVE('',#7514,#7541,#7543,.T.);+#7541 = VERTEX_POINT('',#7542);+#7542 = CARTESIAN_POINT('',(0.400531598745,-0.169487856467,2.1));+#7543 = SURFACE_CURVE('',#7544,(#7548,#7555),.PCURVE_S1.);+#7544 = LINE('',#7545,#7546);+#7545 = CARTESIAN_POINT('',(0.400531598745,1.862268080611,2.1));+#7546 = VECTOR('',#7547,1.);+#7547 = DIRECTION('',(0.,-1.,0.));+#7548 = PCURVE('',#5046,#7549);+#7549 = DEFINITIONAL_REPRESENTATION('',(#7550),#7554);+#7550 = LINE('',#7551,#7552);+#7551 = CARTESIAN_POINT('',(3.114172359233,1.305461450673));+#7552 = VECTOR('',#7553,1.);+#7553 = DIRECTION('',(0.856052609391,-0.51688870171));+#7554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7555 = PCURVE('',#7556,#7561);+#7556 = PLANE('',#7557);+#7557 = AXIS2_PLACEMENT_3D('',#7558,#7559,#7560);+#7558 = CARTESIAN_POINT('',(0.400531598745,-0.128849019232,2.1500001));+#7559 = DIRECTION('',(-1.,0.,0.));+#7560 = DIRECTION('',(0.,-1.,0.));+#7561 = DEFINITIONAL_REPRESENTATION('',(#7562),#7565);+#7562 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7563,#7564),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.991117099844,2.031755937078),.PIECEWISE_BEZIER_KNOTS.);+#7563 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7564 = CARTESIAN_POINT('',(4.063883723462E-02,-5.00001E-02));+#7565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7566 = ORIENTED_EDGE('',*,*,#7567,.T.);+#7567 = EDGE_CURVE('',#7541,#7568,#7570,.T.);+#7568 = VERTEX_POINT('',#7569);+#7569 = CARTESIAN_POINT('',(0.183711449499,-0.169487856467,2.1));+#7570 = SURFACE_CURVE('',#7571,(#7575,#7582),.PCURVE_S1.);+#7571 = LINE('',#7572,#7573);+#7572 = CARTESIAN_POINT('',(-0.963080495742,-0.169487856467,2.1));+#7573 = VECTOR('',#7574,1.);+#7574 = DIRECTION('',(-1.,0.,0.));+#7575 = PCURVE('',#5046,#7576);+#7576 = DEFINITIONAL_REPRESENTATION('',(#7577),#7581);+#7577 = LINE('',#7578,#7579);+#7578 = CARTESIAN_POINT('',(4.148626645659,-0.912053929516));+#7579 = VECTOR('',#7580,1.);+#7580 = DIRECTION('',(-0.51688870171,-0.856052609391));+#7581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7582 = PCURVE('',#7583,#7588);+#7583 = PLANE('',#7584);+#7584 = AXIS2_PLACEMENT_3D('',#7585,#7586,#7587);+#7585 = CARTESIAN_POINT('',(0.400531598745,-0.169487856467,2.1500001));+#7586 = DIRECTION('',(0.,1.,0.));+#7587 = DIRECTION('',(-1.,0.,0.));+#7588 = DEFINITIONAL_REPRESENTATION('',(#7589),#7592);+#7589 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7590,#7591),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.363612094486,-1.14679194524),.PIECEWISE_BEZIER_KNOTS.);+#7590 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7591 = CARTESIAN_POINT('',(0.216820149246,-5.00001E-02));+#7592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7593 = ORIENTED_EDGE('',*,*,#7594,.T.);+#7594 = EDGE_CURVE('',#7568,#7595,#7597,.T.);+#7595 = VERTEX_POINT('',#7596);+#7596 = CARTESIAN_POINT('',(0.183711449499,-0.128849019232,2.1));+#7597 = SURFACE_CURVE('',#7598,(#7602,#7609),.PCURVE_S1.);+#7598 = LINE('',#7599,#7600);+#7599 = CARTESIAN_POINT('',(0.183711449499,1.841948661994,2.1));+#7600 = VECTOR('',#7601,1.);+#7601 = DIRECTION('',(0.,1.,0.));+#7602 = PCURVE('',#5046,#7603);+#7603 = DEFINITIONAL_REPRESENTATION('',(#7604),#7608);+#7604 = LINE('',#7605,#7606);+#7605 = CARTESIAN_POINT('',(3.019494965114,1.109349118234));+#7606 = VECTOR('',#7607,1.);+#7607 = DIRECTION('',(-0.856052609391,0.51688870171));+#7608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7609 = PCURVE('',#7610,#7615);+#7610 = PLANE('',#7611);+#7611 = AXIS2_PLACEMENT_3D('',#7612,#7613,#7614);+#7612 = CARTESIAN_POINT('',(0.183711449499,-0.169487856467,2.1500001));+#7613 = DIRECTION('',(1.,0.,0.));+#7614 = DIRECTION('',(0.,1.,0.));+#7615 = DEFINITIONAL_REPRESENTATION('',(#7616),#7619);+#7616 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7617,#7618),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-2.011436518461,-1.970797681226),.PIECEWISE_BEZIER_KNOTS.);+#7617 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7618 = CARTESIAN_POINT('',(4.063883723462E-02,-5.00001E-02));+#7619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7620 = ORIENTED_EDGE('',*,*,#7621,.F.);+#7621 = EDGE_CURVE('',#7622,#7595,#7624,.T.);+#7622 = VERTEX_POINT('',#7623);+#7623 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.1));+#7624 = SURFACE_CURVE('',#7625,(#7631,#7640),.PCURVE_S1.);+#7625 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7626,#7627,#7628,#7629,#7630),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7626 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.1));+#7627 = CARTESIAN_POINT('',(0.245119491052,-6.373789693746E-02,2.1));+#7628 = CARTESIAN_POINT('',(0.226495750309,-8.363732504317E-02,2.1));+#7629 = CARTESIAN_POINT('',(0.206021536378,-0.105345879579,2.1));+#7630 = CARTESIAN_POINT('',(0.183711449499,-0.128849019232,2.1));+#7631 = PCURVE('',#5046,#7632);+#7632 = DEFINITIONAL_REPRESENTATION('',(#7633),#7639);+#7633 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7634,#7635,#7636,#7637,#7638),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7634 = CARTESIAN_POINT('',(4.675791557929,0.20058371259));+#7635 = CARTESIAN_POINT('',(4.682604039441,0.176889781132));+#7636 = CARTESIAN_POINT('',(4.690012595623,0.150661089713));+#7637 = CARTESIAN_POINT('',(4.698013370522,0.121913178883));+#7638 = CARTESIAN_POINT('',(4.706601462709,9.066606345241E-02));+#7639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7640 = PCURVE('',#7641,#7648);+#7641 = SURFACE_OF_LINEAR_EXTRUSION('',#7642,#7646);+#7642 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7643,#7644,#7645),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7643 = CARTESIAN_POINT('',(0.183711449499,-0.128849019232,2.1500001));+#7644 = CARTESIAN_POINT('',(0.228414170457,-8.17557784367E-02,2.1500001)+ );+#7645 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.1500001)+ );+#7646 = VECTOR('',#7647,1.);+#7647 = DIRECTION('',(0.,0.,1.));+#7648 = DEFINITIONAL_REPRESENTATION('',(#7649),#7655);+#7649 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7650,#7651,#7652,#7653,#7654),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7650 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7651 = CARTESIAN_POINT('',(0.749576926062,-5.00001E-02));+#7652 = CARTESIAN_POINT('',(0.49940988459,-5.00001E-02));+#7653 = CARTESIAN_POINT('',(0.249538354726,-5.00001E-02));+#7654 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7656 = ORIENTED_EDGE('',*,*,#7657,.F.);+#7657 = EDGE_CURVE('',#7658,#7622,#7660,.T.);+#7658 = VERTEX_POINT('',#7659);+#7659 = CARTESIAN_POINT('',(0.30801848104,5.259143642127E-03,2.1));+#7660 = SURFACE_CURVE('',#7661,(#7667,#7676),.PCURVE_S1.);+#7661 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7662,#7663,#7664,#7665,#7666),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7662 = CARTESIAN_POINT('',(0.30801848104,5.259143642126E-03,2.1));+#7663 = CARTESIAN_POINT('',(0.301672562953,-2.164383176376E-03,2.1));+#7664 = CARTESIAN_POINT('',(0.291853163071,-1.31405232715E-02,2.1));+#7665 = CARTESIAN_POINT('',(0.278576282226,-2.765235788577E-02,2.1));+#7666 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.1));+#7667 = PCURVE('',#5046,#7668);+#7668 = DEFINITIONAL_REPRESENTATION('',(#7669),#7675);+#7669 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7670,#7671,#7672,#7673,#7674),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7670 = CARTESIAN_POINT('',(4.656050720086,0.266398416366));+#7671 = CARTESIAN_POINT('',(4.659125516229,0.257128839489));+#7672 = CARTESIAN_POINT('',(4.663446132742,0.243049473794));+#7673 = CARTESIAN_POINT('',(4.669006356928,0.224182761949));+#7674 = CARTESIAN_POINT('',(4.675791557929,0.20058371259));+#7675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7676 = PCURVE('',#7677,#7684);+#7677 = SURFACE_OF_LINEAR_EXTRUSION('',#7678,#7682);+#7678 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7679,#7680,#7681),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7679 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.1500001)+ );+#7680 = CARTESIAN_POINT('',(0.295348725902,-9.562079349322E-03,2.1500001+ ));+#7681 = CARTESIAN_POINT('',(0.30801848104,5.259143642127E-03,2.1500001)+ );+#7682 = VECTOR('',#7683,1.);+#7683 = DIRECTION('',(0.,0.,1.));+#7684 = DEFINITIONAL_REPRESENTATION('',(#7685),#7691);+#7685 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7686,#7687,#7688,#7689,#7690),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7686 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7687 = CARTESIAN_POINT('',(0.749564296321,-5.00001E-02));+#7688 = CARTESIAN_POINT('',(0.499321763201,-5.00001E-02));+#7689 = CARTESIAN_POINT('',(0.249420257375,-5.00001E-02));+#7690 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7692 = ORIENTED_EDGE('',*,*,#7693,.F.);+#7693 = EDGE_CURVE('',#7694,#7658,#7696,.T.);+#7694 = VERTEX_POINT('',#7695);+#7695 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.1));+#7696 = SURFACE_CURVE('',#7697,(#7703,#7712),.PCURVE_S1.);+#7697 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7698,#7699,#7700,#7701,#7702),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7698 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.1));+#7699 = CARTESIAN_POINT('',(0.336103313323,4.343955309038E-02,2.1));+#7700 = CARTESIAN_POINT('',(0.329323560583,3.255517191943E-02,2.1));+#7701 = CARTESIAN_POINT('',(0.319957426908,1.982465760054E-02,2.1));+#7702 = CARTESIAN_POINT('',(0.30801848104,5.259143642126E-03,2.1));+#7703 = PCURVE('',#5046,#7704);+#7704 = DEFINITIONAL_REPRESENTATION('',(#7705),#7711);+#7705 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7706,#7707,#7708,#7709,#7710),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7706 = CARTESIAN_POINT('',(4.632315149266,0.318428707146));+#7707 = CARTESIAN_POINT('',(4.637883013447,0.310175532596));+#7708 = CARTESIAN_POINT('',(4.643696238759,0.29874569392));+#7709 = CARTESIAN_POINT('',(4.649752980084,0.284147531729));+#7710 = CARTESIAN_POINT('',(4.656050720086,0.266398416366));+#7711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7712 = PCURVE('',#7713,#7720);+#7713 = SURFACE_OF_LINEAR_EXTRUSION('',#7714,#7718);+#7714 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7715,#7716,#7717),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7715 = CARTESIAN_POINT('',(0.30801848104,5.259143642127E-03,2.1500001)+ );+#7716 = CARTESIAN_POINT('',(0.331923679413,3.442348565756E-02,2.1500001)+ );+#7717 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.1500001)+ );+#7718 = VECTOR('',#7719,1.);+#7719 = DIRECTION('',(0.,0.,1.));+#7720 = DEFINITIONAL_REPRESENTATION('',(#7721),#7727);+#7721 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7722,#7723,#7724,#7725,#7726),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7722 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7723 = CARTESIAN_POINT('',(0.749774358339,-5.00001E-02));+#7724 = CARTESIAN_POINT('',(0.499658924971,-5.00001E-02));+#7725 = CARTESIAN_POINT('',(0.249714427823,-5.00001E-02));+#7726 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7728 = ORIENTED_EDGE('',*,*,#7729,.F.);+#7729 = EDGE_CURVE('',#7730,#7694,#7732,.T.);+#7730 = VERTEX_POINT('',#7731);+#7731 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.1));+#7732 = SURFACE_CURVE('',#7733,(#7739,#7748),.PCURVE_S1.);+#7733 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7734,#7735,#7736,#7737,#7738),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7734 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.1));+#7735 = CARTESIAN_POINT('',(0.348657318275,7.996274209641E-02,2.1));+#7736 = CARTESIAN_POINT('',(0.347262805092,7.065929489815E-02,2.1));+#7737 = CARTESIAN_POINT('',(0.344473646787,6.149555813503E-02,2.1));+#7738 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.1));+#7739 = PCURVE('',#5046,#7740);+#7740 = DEFINITIONAL_REPRESENTATION('',(#7741),#7747);+#7741 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7742,#7743,#7744,#7745,#7746),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7742 = CARTESIAN_POINT('',(4.605022817696,0.344681669891));+#7743 = CARTESIAN_POINT('',(4.613106265516,0.339800845041));+#7744 = CARTESIAN_POINT('',(4.620349697658,0.333798221648));+#7745 = CARTESIAN_POINT('',(4.626752654011,0.326673923405));+#7746 = CARTESIAN_POINT('',(4.632315149266,0.318428707146));+#7747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7748 = PCURVE('',#7749,#7756);+#7749 = SURFACE_OF_LINEAR_EXTRUSION('',#7750,#7754);+#7750 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7751,#7752,#7753),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7751 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.1500001)+ );+#7752 = CARTESIAN_POINT('',(0.348657318275,7.052033520125E-02,2.1500001)+ );+#7753 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.1500001)+ );+#7754 = VECTOR('',#7755,1.);+#7755 = DIRECTION('',(0.,0.,1.));+#7756 = DEFINITIONAL_REPRESENTATION('',(#7757),#7763);+#7757 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7758,#7759,#7760,#7761,#7762),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7758 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7759 = CARTESIAN_POINT('',(0.74999612228,-5.00001E-02));+#7760 = CARTESIAN_POINT('',(0.499986983887,-5.00001E-02));+#7761 = CARTESIAN_POINT('',(0.249984356521,-5.00001E-02));+#7762 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7764 = ORIENTED_EDGE('',*,*,#7765,.F.);+#7765 = EDGE_CURVE('',#7766,#7730,#7768,.T.);+#7766 = VERTEX_POINT('',#7767);+#7767 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.1));+#7768 = SURFACE_CURVE('',#7769,(#7778,#7790),.PCURVE_S1.);+#7769 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7770,#7771,#7772,#7773,#7774,+ #7775,#7776,#7777),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.188969801706,+ 1.),.UNSPECIFIED.);+#7770 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.1));+#7771 = CARTESIAN_POINT('',(0.332747355423,0.134655747535,2.1));+#7772 = CARTESIAN_POINT('',(0.334303150587,0.132974979083,2.1));+#7773 = CARTESIAN_POINT('',(0.335754353609,0.131217335688,2.1));+#7774 = CARTESIAN_POINT('',(0.342880337146,0.121509448069,2.1));+#7775 = CARTESIAN_POINT('',(0.346732859348,0.112220403559,2.1));+#7776 = CARTESIAN_POINT('',(0.348657318275,0.101517350379,2.1));+#7777 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.1));+#7778 = PCURVE('',#5046,#7779);+#7779 = DEFINITIONAL_REPRESENTATION('',(#7780),#7789);+#7780 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7781,#7782,#7783,#7784,#7785,+ #7786,#7787,#7788),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.188969801706,+ 1.),.UNSPECIFIED.);+#7781 = CARTESIAN_POINT('',(4.555831266793,0.353858951744));+#7782 = CARTESIAN_POINT('',(4.558062495452,0.354451276401));+#7783 = CARTESIAN_POINT('',(4.560305494614,0.354914348687));+#7784 = CARTESIAN_POINT('',(4.562560240275,0.355248148808));+#7785 = CARTESIAN_POINT('',(4.574554043182,0.356330468182));+#7786 = CARTESIAN_POINT('',(4.584497279172,0.354827027709));+#7787 = CARTESIAN_POINT('',(4.594654386851,0.350942178532));+#7788 = CARTESIAN_POINT('',(4.605022817696,0.344681669891));+#7789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7790 = PCURVE('',#7791,#7798);+#7791 = SURFACE_OF_LINEAR_EXTRUSION('',#7792,#7796);+#7792 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7793,#7794,#7795),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7793 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.1500001)+ );+#7794 = CARTESIAN_POINT('',(0.348657318275,0.119286939883,2.1500001));+#7795 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.1500001));+#7796 = VECTOR('',#7797,1.);+#7797 = DIRECTION('',(0.,0.,1.));+#7798 = DEFINITIONAL_REPRESENTATION('',(#7799),#7808);+#7799 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7800,#7801,#7802,#7803,#7804,+ #7805,#7806,#7807),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.188969801706,+ 1.),.UNSPECIFIED.);+#7800 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7801 = CARTESIAN_POINT('',(0.952751063245,-5.00001E-02));+#7802 = CARTESIAN_POINT('',(0.905501061974,-5.00001E-02));+#7803 = CARTESIAN_POINT('',(0.858250529658,-5.00001E-02));+#7804 = CARTESIAN_POINT('',(0.608207775572,-5.00001E-02));+#7805 = CARTESIAN_POINT('',(0.405415582929,-5.00001E-02));+#7806 = CARTESIAN_POINT('',(0.202665684233,-5.00001E-02));+#7807 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7809 = ORIENTED_EDGE('',*,*,#7810,.F.);+#7810 = EDGE_CURVE('',#7811,#7766,#7813,.T.);+#7811 = VERTEX_POINT('',#7812);+#7812 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.1));+#7813 = SURFACE_CURVE('',#7814,(#7820,#7829),.PCURVE_S1.);+#7814 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7815,#7816,#7817,#7818,#7819),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7815 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.1));+#7816 = CARTESIAN_POINT('',(0.298209846491,0.153232321573,2.1));+#7817 = CARTESIAN_POINT('',(0.311340508963,0.150406315951,2.1));+#7818 = CARTESIAN_POINT('',(0.322300199757,0.144747557771,2.1));+#7819 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.1));+#7820 = PCURVE('',#5046,#7821);+#7821 = DEFINITIONAL_REPRESENTATION('',(#7822),#7828);+#7822 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7823,#7824,#7825,#7826,#7827),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7823 = CARTESIAN_POINT('',(4.5164037517,0.321396767376));+#7824 = CARTESIAN_POINT('',(4.524307922621,0.334487372994));+#7825 = CARTESIAN_POINT('',(4.533514223186,0.344267180489));+#7826 = CARTESIAN_POINT('',(4.544023358238,0.350724304222));+#7827 = CARTESIAN_POINT('',(4.555831266793,0.353858951744));+#7828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7829 = PCURVE('',#7830,#7837);+#7830 = SURFACE_OF_LINEAR_EXTRUSION('',#7831,#7835);+#7831 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7832,#7833,#7834),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7832 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.1500001));+#7833 = CARTESIAN_POINT('',(0.313516676666,0.153232321573,2.1500001));+#7834 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.1500001));+#7835 = VECTOR('',#7836,1.);+#7836 = DIRECTION('',(0.,0.,1.));+#7837 = DEFINITIONAL_REPRESENTATION('',(#7838),#7844);+#7838 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7839,#7840,#7841,#7842,#7843),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7839 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7840 = CARTESIAN_POINT('',(0.750122606959,-5.00001E-02));+#7841 = CARTESIAN_POINT('',(0.500112911279,-5.00001E-02));+#7842 = CARTESIAN_POINT('',(0.250046593089,-5.00001E-02));+#7843 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7845 = ORIENTED_EDGE('',*,*,#7846,.F.);+#7846 = EDGE_CURVE('',#7847,#7811,#7849,.T.);+#7847 = VERTEX_POINT('',#7848);+#7848 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.1));+#7849 = SURFACE_CURVE('',#7850,(#7856,#7865),.PCURVE_S1.);+#7850 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7851,#7852,#7853,#7854,#7855),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7851 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.1));+#7852 = CARTESIAN_POINT('',(0.24920951394,0.149287244738,2.1));+#7853 = CARTESIAN_POINT('',(0.26080329304,0.151917172943,2.1));+#7854 = CARTESIAN_POINT('',(0.272039657537,0.153232321573,2.1));+#7855 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.1));+#7856 = PCURVE('',#5046,#7857);+#7857 = DEFINITIONAL_REPRESENTATION('',(#7858),#7864);+#7858 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7859,#7860,#7861,#7862,#7863),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7859 = CARTESIAN_POINT('',(4.49955632268,0.278232734262));+#7860 = CARTESIAN_POINT('',(4.502357397665,0.290501344809));+#7861 = CARTESIAN_POINT('',(4.506098734189,0.301785609836));+#7862 = CARTESIAN_POINT('',(4.510780847629,0.312084314452));+#7863 = CARTESIAN_POINT('',(4.5164037517,0.321396767376));+#7864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7865 = PCURVE('',#7866,#7873);+#7866 = SURFACE_OF_LINEAR_EXTRUSION('',#7867,#7871);+#7867 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7868,#7869,#7870),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7868 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.1500001));+#7869 = CARTESIAN_POINT('',(0.261164292228,0.153232321573,2.1500001));+#7870 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.1500001));+#7871 = VECTOR('',#7872,1.);+#7872 = DIRECTION('',(0.,0.,1.));+#7873 = DEFINITIONAL_REPRESENTATION('',(#7874),#7880);+#7874 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7875,#7876,#7877,#7878,#7879),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7875 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7876 = CARTESIAN_POINT('',(0.750045577984,-5.00001E-02));+#7877 = CARTESIAN_POINT('',(0.500053376805,-5.00001E-02));+#7878 = CARTESIAN_POINT('',(0.250034475722,-5.00001E-02));+#7879 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7881 = ORIENTED_EDGE('',*,*,#7882,.F.);+#7882 = EDGE_CURVE('',#7883,#7847,#7885,.T.);+#7883 = VERTEX_POINT('',#7884);+#7884 = CARTESIAN_POINT('',(0.186580073304,0.121438407736,2.1));+#7885 = SURFACE_CURVE('',#7886,(#7892,#7901),.PCURVE_S1.);+#7886 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7887,#7888,#7889,#7890,#7891),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7887 = CARTESIAN_POINT('',(0.186580073304,0.121438407736,2.1));+#7888 = CARTESIAN_POINT('',(0.199962123464,0.129443741315,2.1));+#7889 = CARTESIAN_POINT('',(0.212870094398,0.13609763069,2.1));+#7890 = CARTESIAN_POINT('',(0.225302741004,0.141398009669,2.1));+#7891 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.1));+#7892 = PCURVE('',#5046,#7893);+#7893 = DEFINITIONAL_REPRESENTATION('',(#7894),#7900);+#7894 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7895,#7896,#7897,#7898,#7899),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7895 = CARTESIAN_POINT('',(4.493825016989,0.222492499526));+#7896 = CARTESIAN_POINT('',(4.493889060824,0.238086104965));+#7897 = CARTESIAN_POINT('',(4.494864965799,0.252575327406));+#7898 = CARTESIAN_POINT('',(4.496753857107,0.265958032983));+#7899 = CARTESIAN_POINT('',(4.49955632268,0.278232734262));+#7900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7901 = PCURVE('',#7902,#7909);+#7902 = SURFACE_OF_LINEAR_EXTRUSION('',#7903,#7907);+#7903 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7904,#7905,#7906),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7904 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.1500001));+#7905 = CARTESIAN_POINT('',(0.213353895482,0.137454890647,2.1500001));+#7906 = CARTESIAN_POINT('',(0.186580073304,0.121438407736,2.1500001));+#7907 = VECTOR('',#7908,1.);+#7908 = DIRECTION('',(0.,0.,1.));+#7909 = DEFINITIONAL_REPRESENTATION('',(#7910),#7916);+#7910 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7911,#7912,#7913,#7914,#7915),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7911 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7912 = CARTESIAN_POINT('',(0.750090777632,-5.00001E-02));+#7913 = CARTESIAN_POINT('',(0.500112877463,-5.00001E-02));+#7914 = CARTESIAN_POINT('',(0.250078511463,-5.00001E-02));+#7915 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7917 = ORIENTED_EDGE('',*,*,#7918,.T.);+#7918 = EDGE_CURVE('',#7883,#7919,#7921,.T.);+#7919 = VERTEX_POINT('',#7920);+#7920 = CARTESIAN_POINT('',(0.186580073304,0.170205012418,2.1));+#7921 = SURFACE_CURVE('',#7922,(#7926,#7933),.PCURVE_S1.);+#7922 = LINE('',#7923,#7924);+#7923 = CARTESIAN_POINT('',(0.186580073304,1.987411794096,2.1));+#7924 = VECTOR('',#7925,1.);+#7925 = DIRECTION('',(0.,1.,0.));+#7926 = PCURVE('',#5046,#7927);+#7927 = DEFINITIONAL_REPRESENTATION('',(#7928),#7932);+#7928 = LINE('',#7929,#7930);+#7929 = CARTESIAN_POINT('',(2.896453630542,1.186993060626));+#7930 = VECTOR('',#7931,1.);+#7931 = DIRECTION('',(-0.856052609391,0.51688870171));+#7932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7933 = PCURVE('',#7934,#7939);+#7934 = PLANE('',#7935);+#7935 = AXIS2_PLACEMENT_3D('',#7936,#7937,#7938);+#7936 = CARTESIAN_POINT('',(0.186580073304,0.121438407736,2.1500001));+#7937 = DIRECTION('',(1.,0.,0.));+#7938 = DIRECTION('',(0.,1.,0.));+#7939 = DEFINITIONAL_REPRESENTATION('',(#7940),#7943);+#7940 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7941,#7942),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.865973386359,-1.817206781678),.PIECEWISE_BEZIER_KNOTS.);+#7941 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7942 = CARTESIAN_POINT('',(4.876660468154E-02,-5.00001E-02));+#7943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7944 = ORIENTED_EDGE('',*,*,#7945,.F.);+#7945 = EDGE_CURVE('',#7946,#7919,#7948,.T.);+#7946 = VERTEX_POINT('',#7947);+#7947 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.1));+#7948 = SURFACE_CURVE('',#7949,(#7955,#7964),.PCURVE_S1.);+#7949 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7950,#7951,#7952,#7953,#7954),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7950 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.1));+#7951 = CARTESIAN_POINT('',(0.223093712257,0.184906319578,2.1));+#7952 = CARTESIAN_POINT('',(0.211060698548,0.180961537904,2.1));+#7953 = CARTESIAN_POINT('',(0.198889369817,0.176060891342,2.1));+#7954 = CARTESIAN_POINT('',(0.186580073304,0.170205012418,2.1));+#7955 = PCURVE('',#5046,#7956);+#7956 = DEFINITIONAL_REPRESENTATION('',(#7957),#7963);+#7957 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7958,#7959,#7960,#7961,#7962),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7958 = CARTESIAN_POINT('',(4.461956360367,0.298282906028));+#7959 = CARTESIAN_POINT('',(4.458366632878,0.286555941982));+#7960 = CARTESIAN_POINT('',(4.455523844689,0.27421603612));+#7961 = CARTESIAN_POINT('',(4.453427833661,0.26126364956));+#7962 = CARTESIAN_POINT('',(4.4520782378,0.247699406507));+#7963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7964 = PCURVE('',#7965,#7972);+#7965 = SURFACE_OF_LINEAR_EXTRUSION('',#7966,#7970);+#7966 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7967,#7968,#7969),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7967 = CARTESIAN_POINT('',(0.186580073304,0.170205012418,2.1500001));+#7968 = CARTESIAN_POINT('',(0.211202427628,0.181918559621,2.1500001));+#7969 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.1500001));+#7970 = VECTOR('',#7971,1.);+#7971 = DIRECTION('',(0.,0.,1.));+#7972 = DEFINITIONAL_REPRESENTATION('',(#7973),#7979);+#7973 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7974,#7975,#7976,#7977,#7978),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7974 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7975 = CARTESIAN_POINT('',(0.749967384527,-5.00001E-02));+#7976 = CARTESIAN_POINT('',(0.49995279303,-5.00001E-02));+#7977 = CARTESIAN_POINT('',(0.249961810125,-5.00001E-02));+#7978 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7980 = ORIENTED_EDGE('',*,*,#7981,.F.);+#7981 = EDGE_CURVE('',#7982,#7946,#7984,.T.);+#7982 = VERTEX_POINT('',#7983);+#7983 = CARTESIAN_POINT('',(0.281961814813,0.193871158808,2.1));+#7984 = SURFACE_CURVE('',#7985,(#7991,#8000),.PCURVE_S1.);+#7985 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7986,#7987,#7988,#7989,#7990),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7986 = CARTESIAN_POINT('',(0.281961814813,0.193871158807,2.1));+#7987 = CARTESIAN_POINT('',(0.270367194756,0.193871158807,2.1));+#7988 = CARTESIAN_POINT('',(0.258673173188,0.192875005967,2.1));+#7989 = CARTESIAN_POINT('',(0.246880036682,0.190882783001,2.1));+#7990 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.1));+#7991 = PCURVE('',#5046,#7992);+#7992 = DEFINITIONAL_REPRESENTATION('',(#7993),#7999);+#7993 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7994,#7995,#7996,#7997,#7998),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7994 = CARTESIAN_POINT('',(4.481120515965,0.341583958896));+#7995 = CARTESIAN_POINT('',(4.475127387856,0.331658354141));+#7996 = CARTESIAN_POINT('',(4.469935639469,0.321132756315));+#7997 = CARTESIAN_POINT('',(4.46554534812,0.310007453494));+#7998 = CARTESIAN_POINT('',(4.461956360367,0.298282906028));+#7999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8000 = PCURVE('',#8001,#8008);+#8001 = SURFACE_OF_LINEAR_EXTRUSION('',#8002,#8006);+#8002 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8003,#8004,#8005),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8003 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.1500001));+#8004 = CARTESIAN_POINT('',(0.258773772391,0.193871158808,2.1500001));+#8005 = CARTESIAN_POINT('',(0.281961814813,0.193871158808,2.1500001));+#8006 = VECTOR('',#8007,1.);+#8007 = DIRECTION('',(0.,0.,1.));+#8008 = DEFINITIONAL_REPRESENTATION('',(#8009),#8015);+#8009 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8010,#8011,#8012,#8013,#8014),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8010 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8011 = CARTESIAN_POINT('',(0.74998708717,-5.00001E-02));+#8012 = CARTESIAN_POINT('',(0.499978783918,-5.00001E-02));+#8013 = CARTESIAN_POINT('',(0.249981091177,-5.00001E-02));+#8014 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8016 = ORIENTED_EDGE('',*,*,#8017,.F.);+#8017 = EDGE_CURVE('',#8018,#7982,#8020,.T.);+#8018 = VERTEX_POINT('',#8019);+#8019 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.1));+#8020 = SURFACE_CURVE('',#8021,(#8030,#8042),.PCURVE_S1.);+#8021 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8022,#8023,#8024,#8025,#8026,+ #8027,#8028,#8029),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.104941064371,+ 1.),.UNSPECIFIED.);+#8022 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.1));+#8023 = CARTESIAN_POINT('',(0.364552211978,0.167483679536,2.1));+#8024 = CARTESIAN_POINT('',(0.362839200874,0.168894609613,2.1));+#8025 = CARTESIAN_POINT('',(0.361088617458,0.170254376255,2.1));+#8026 = CARTESIAN_POINT('',(0.344049147561,0.182724155185,2.1));+#8027 = CARTESIAN_POINT('',(0.326065675489,0.190162547235,2.1));+#8028 = CARTESIAN_POINT('',(0.305359863337,0.193871158807,2.1));+#8029 = CARTESIAN_POINT('',(0.281961814813,0.193871158807,2.1));+#8030 = PCURVE('',#5046,#8031);+#8031 = DEFINITIONAL_REPRESENTATION('',(#8032),#8041);+#8032 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8033,#8034,#8035,#8036,#8037,+ #8038,#8039,#8040),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.104941064371,+ 1.),.UNSPECIFIED.);+#8033 = CARTESIAN_POINT('',(4.548517253642,0.399324816743));+#8034 = CARTESIAN_POINT('',(4.546399629615,0.398646293997));+#8035 = CARTESIAN_POINT('',(4.544306363155,0.397909160188));+#8036 = CARTESIAN_POINT('',(4.542237474584,0.397113416701));+#8037 = CARTESIAN_POINT('',(4.522755178319,0.388972221874));+#8038 = CARTESIAN_POINT('',(4.507092069863,0.377422244491));+#8039 = CARTESIAN_POINT('',(4.493214702889,0.36161391939));+#8040 = CARTESIAN_POINT('',(4.481120515965,0.341583958896));+#8041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8042 = PCURVE('',#8043,#8050);+#8043 = SURFACE_OF_LINEAR_EXTRUSION('',#8044,#8048);+#8044 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8045,#8046,#8047),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8045 = CARTESIAN_POINT('',(0.281961814813,0.193871158808,2.1500001));+#8046 = CARTESIAN_POINT('',(0.334314199251,0.193871158808,2.1500001));+#8047 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.1500001));+#8048 = VECTOR('',#8049,1.);+#8049 = DIRECTION('',(0.,0.,1.));+#8050 = DEFINITIONAL_REPRESENTATION('',(#8051),#8060);+#8051 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8052,#8053,#8054,#8055,#8056,+ #8057,#8058,#8059),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.104941064371,+ 1.),.UNSPECIFIED.);+#8052 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8053 = CARTESIAN_POINT('',(0.973750446366,-5.00001E-02));+#8054 = CARTESIAN_POINT('',(0.947500442769,-5.00001E-02));+#8055 = CARTESIAN_POINT('',(0.921250217768,-5.00001E-02));+#8056 = CARTESIAN_POINT('',(0.671107740886,-5.00001E-02));+#8057 = CARTESIAN_POINT('',(0.447215842252,-5.00001E-02));+#8058 = CARTESIAN_POINT('',(0.2234668848,-5.00001E-02));+#8059 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8061 = ORIENTED_EDGE('',*,*,#8062,.F.);+#8062 = EDGE_CURVE('',#8063,#8018,#8065,.T.);+#8063 = VERTEX_POINT('',#8064);+#8064 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.1));+#8065 = SURFACE_CURVE('',#8066,(#8075,#8087),.PCURVE_S1.);+#8066 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8067,#8068,#8069,#8070,#8071,+ #8072,#8073,#8074),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.596038931418,+ 1.),.UNSPECIFIED.);+#8067 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.1));+#8068 = CARTESIAN_POINT('',(0.398141078907,0.106446809746,2.1));+#8069 = CARTESIAN_POINT('',(0.39625404833,0.118885908346,2.1));+#8070 = CARTESIAN_POINT('',(0.392474735108,0.130301521827,2.1));+#8071 = CARTESIAN_POINT('',(0.382962234592,0.147731422163,2.1));+#8072 = CARTESIAN_POINT('',(0.378251178115,0.154300818794,2.1));+#8073 = CARTESIAN_POINT('',(0.372672301091,0.160397609262,2.1));+#8074 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.1));+#8075 = PCURVE('',#5046,#8076);+#8076 = DEFINITIONAL_REPRESENTATION('',(#8077),#8086);+#8077 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8078,#8079,#8080,#8081,#8082,+ #8083,#8084,#8085),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.596038931418,+ 1.),.UNSPECIFIED.);+#8078 = CARTESIAN_POINT('',(4.627530798368,0.388895821346));+#8079 = CARTESIAN_POINT('',(4.616012107086,0.395850862797));+#8080 = CARTESIAN_POINT('',(4.604388199486,0.400665094873));+#8081 = CARTESIAN_POINT('',(4.592662349474,0.403330405558));+#8082 = CARTESIAN_POINT('',(4.572824533767,0.404196523226));+#8083 = CARTESIAN_POINT('',(4.564765692774,0.403559257931));+#8084 = CARTESIAN_POINT('',(4.556662860882,0.401934807806));+#8085 = CARTESIAN_POINT('',(4.548517253642,0.399324816743));+#8086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8087 = PCURVE('',#8088,#8095);+#8088 = SURFACE_OF_LINEAR_EXTRUSION('',#8089,#8093);+#8089 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8090,#8091,#8092),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8090 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.1500001));+#8091 = CARTESIAN_POINT('',(0.398141078907,0.138172046598,2.1500001));+#8092 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.1500001)+ );+#8093 = VECTOR('',#8094,1.);+#8094 = DIRECTION('',(0.,0.,1.));+#8095 = DEFINITIONAL_REPRESENTATION('',(#8096),#8105);+#8096 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8097,#8098,#8099,#8100,#8101,+ #8102,#8103,#8104),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.596038931418,+ 1.),.UNSPECIFIED.);+#8097 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8098 = CARTESIAN_POINT('',(0.851091828265,-5.00001E-02));+#8099 = CARTESIAN_POINT('',(0.702091776712,-5.00001E-02));+#8100 = CARTESIAN_POINT('',(0.553045698842,-5.00001E-02));+#8101 = CARTESIAN_POINT('',(0.302985357167,-5.00001E-02));+#8102 = CARTESIAN_POINT('',(0.201970871969,-5.00001E-02));+#8103 = CARTESIAN_POINT('',(0.100970970947,-5.00001E-02));+#8104 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8106 = ORIENTED_EDGE('',*,*,#8107,.F.);+#8107 = EDGE_CURVE('',#8108,#8063,#8110,.T.);+#8108 = VERTEX_POINT('',#8109);+#8109 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.1));+#8110 = SURFACE_CURVE('',#8111,(#8117,#8126),.PCURVE_S1.);+#8111 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8112,#8113,#8114,#8115,#8116),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8112 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.1));+#8113 = CARTESIAN_POINT('',(0.392821371697,5.85660089382E-02,2.1));+#8114 = CARTESIAN_POINT('',(0.396367842981,7.004050358728E-02,2.1));+#8115 = CARTESIAN_POINT('',(0.398141078907,8.151586269287E-02,2.1));+#8116 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.1));+#8117 = PCURVE('',#5046,#8118);+#8118 = DEFINITIONAL_REPRESENTATION('',(#8119),#8125);+#8119 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8120,#8121,#8122,#8123,#8124),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8120 = CARTESIAN_POINT('',(4.66132331917,0.356065145787));+#8121 = CARTESIAN_POINT('',(4.654250895004,0.366547868592));+#8122 = CARTESIAN_POINT('',(4.646261254856,0.375514871231));+#8123 = CARTESIAN_POINT('',(4.637354309366,0.382964337942));+#8124 = CARTESIAN_POINT('',(4.627530798368,0.388895821346));+#8125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8126 = PCURVE('',#8127,#8134);+#8127 = SURFACE_OF_LINEAR_EXTRUSION('',#8128,#8132);+#8128 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8129,#8130,#8131),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8129 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.1500001)+ );+#8130 = CARTESIAN_POINT('',(0.398141078907,7.004223123378E-02,2.1500001)+ );+#8131 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.1500001)+ );+#8132 = VECTOR('',#8133,1.);+#8133 = DIRECTION('',(0.,0.,1.));+#8134 = DEFINITIONAL_REPRESENTATION('',(#8135),#8141);+#8135 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8136,#8137,#8138,#8139,#8140),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8136 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8137 = CARTESIAN_POINT('',(0.750037628592,-5.00001E-02));+#8138 = CARTESIAN_POINT('',(0.500037641013,-5.00001E-02));+#8139 = CARTESIAN_POINT('',(0.250018819131,-5.00001E-02));+#8140 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8142 = ORIENTED_EDGE('',*,*,#8143,.F.);+#8143 = EDGE_CURVE('',#8144,#8108,#8146,.T.);+#8144 = VERTEX_POINT('',#8145);+#8145 = CARTESIAN_POINT('',(0.352960253982,-3.585779755996E-03,2.1));+#8146 = SURFACE_CURVE('',#8147,(#8153,#8162),.PCURVE_S1.);+#8147 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8148,#8149,#8150,#8151,#8152),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8148 = CARTESIAN_POINT('',(0.352960253982,-3.585779755997E-03,2.1));+#8149 = CARTESIAN_POINT('',(0.364903731238,1.026865386162E-02,2.1));+#8150 = CARTESIAN_POINT('',(0.374646471676,2.333572153622E-02,2.1));+#8151 = CARTESIAN_POINT('',(0.382180995355,3.561148918878E-02,2.1));+#8152 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.1));+#8153 = PCURVE('',#5046,#8154);+#8154 = DEFINITIONAL_REPRESENTATION('',(#8155),#8161);+#8155 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8156,#8157,#8158,#8159,#8160),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8156 = CARTESIAN_POINT('',(4.68685233451,0.300299097391));+#8157 = CARTESIAN_POINT('',(4.681165658913,0.317684542467));+#8158 = CARTESIAN_POINT('',(4.675015473989,0.332779060487));+#8159 = CARTESIAN_POINT('',(4.66840128122,0.345574214748));+#8160 = CARTESIAN_POINT('',(4.66132331917,0.356065145787));+#8161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8162 = PCURVE('',#8163,#8170);+#8163 = SURFACE_OF_LINEAR_EXTRUSION('',#8164,#8168);+#8164 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8165,#8166,#8167),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8165 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.1500001)+ );+#8166 = CARTESIAN_POINT('',(0.376865452355,2.414425035704E-02,2.1500001)+ );+#8167 = CARTESIAN_POINT('',(0.352960253982,-3.585779755996E-03,2.1500001+ ));+#8168 = VECTOR('',#8169,1.);+#8169 = DIRECTION('',(0.,0.,1.));+#8170 = DEFINITIONAL_REPRESENTATION('',(#8171),#8177);+#8171 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8172,#8173,#8174,#8175,#8176),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8172 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8173 = CARTESIAN_POINT('',(0.750190793859,-5.00001E-02));+#8174 = CARTESIAN_POINT('',(0.500232693971,-5.00001E-02));+#8175 = CARTESIAN_POINT('',(0.250158098184,-5.00001E-02));+#8176 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8178 = ORIENTED_EDGE('',*,*,#8179,.F.);+#8179 = EDGE_CURVE('',#7478,#8144,#8180,.T.);+#8180 = SURFACE_CURVE('',#8181,(#8187,#8196),.PCURVE_S1.);+#8181 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8182,#8183,#8184,#8185,#8186),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8182 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,2.1));+#8183 = CARTESIAN_POINT('',(0.326830150871,-3.288441299426E-02,2.1));+#8184 = CARTESIAN_POINT('',(0.337549008395,-2.112994281292E-02,2.1));+#8185 = CARTESIAN_POINT('',(0.346260874657,-1.136184504426E-02,2.1));+#8186 = CARTESIAN_POINT('',(0.352960253982,-3.585779755997E-03,2.1));+#8187 = PCURVE('',#5046,#8188);+#8188 = DEFINITIONAL_REPRESENTATION('',(#8189),#8195);+#8189 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8190,#8191,#8192,#8193,#8194),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8190 = CARTESIAN_POINT('',(4.703608696616,0.24480353428));+#8191 = CARTESIAN_POINT('',(4.698427150872,0.262786221943));+#8192 = CARTESIAN_POINT('',(4.693905162351,0.278037880728));+#8193 = CARTESIAN_POINT('',(4.690046222009,0.290544715947));+#8194 = CARTESIAN_POINT('',(4.68685233451,0.300299097391));+#8195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8196 = PCURVE('',#8197,#8204);+#8197 = SURFACE_OF_LINEAR_EXTRUSION('',#8198,#8202);+#8198 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8199,#8200,#8201),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8199 = CARTESIAN_POINT('',(0.352960253982,-3.585779755996E-03,2.1500001+ ));+#8200 = CARTESIAN_POINT('',(0.339573342893,-1.912415869864E-02,2.1500001+ ));+#8201 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,2.1500001+ ));+#8202 = VECTOR('',#8203,1.);+#8203 = DIRECTION('',(0.,0.,1.));+#8204 = DEFINITIONAL_REPRESENTATION('',(#8205),#8211);+#8205 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8206,#8207,#8208,#8209,#8210),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8206 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8207 = CARTESIAN_POINT('',(0.750268546846,-5.00001E-02));+#8208 = CARTESIAN_POINT('',(0.500326734943,-5.00001E-02));+#8209 = CARTESIAN_POINT('',(0.250221252711,-5.00001E-02));+#8210 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8212 = FACE_BOUND('',#8213,.T.);+#8213 = EDGE_LOOP('',(#8214,#8243,#8270,#8297,#8324,#8351,#8378,#8405,+ #8432,#8459));+#8214 = ORIENTED_EDGE('',*,*,#8215,.T.);+#8215 = EDGE_CURVE('',#8216,#8218,#8220,.T.);+#8216 = VERTEX_POINT('',#8217);+#8217 = CARTESIAN_POINT('',(0.546353308822,-0.169487856467,2.1));+#8218 = VERTEX_POINT('',#8219);+#8219 = CARTESIAN_POINT('',(0.497825756124,-0.169487856467,2.1));+#8220 = SURFACE_CURVE('',#8221,(#8225,#8232),.PCURVE_S1.);+#8221 = LINE('',#8222,#8223);+#8222 = CARTESIAN_POINT('',(-0.890169640703,-0.169487856467,2.1));+#8223 = VECTOR('',#8224,1.);+#8224 = DIRECTION('',(-1.,0.,0.));+#8225 = PCURVE('',#5046,#8226);+#8226 = DEFINITIONAL_REPRESENTATION('',(#8227),#8231);+#8227 = LINE('',#8228,#8229);+#8228 = CARTESIAN_POINT('',(4.186313442861,-0.849638401808));+#8229 = VECTOR('',#8230,1.);+#8230 = DIRECTION('',(-0.51688870171,-0.856052609391));+#8231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8232 = PCURVE('',#8233,#8238);+#8233 = PLANE('',#8234);+#8234 = AXIS2_PLACEMENT_3D('',#8235,#8236,#8237);+#8235 = CARTESIAN_POINT('',(0.546353308822,-0.169487856467,2.1500001));+#8236 = DIRECTION('',(0.,1.,0.));+#8237 = DIRECTION('',(-1.,0.,0.));+#8238 = DEFINITIONAL_REPRESENTATION('',(#8239),#8242);+#8239 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8240,#8241),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.436522949525,-1.387995396827),.PIECEWISE_BEZIER_KNOTS.);+#8240 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8241 = CARTESIAN_POINT('',(4.852755269781E-02,-5.00001E-02));+#8242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8243 = ORIENTED_EDGE('',*,*,#8244,.T.);+#8244 = EDGE_CURVE('',#8218,#8245,#8247,.T.);+#8245 = VERTEX_POINT('',#8246);+#8246 = CARTESIAN_POINT('',(0.497825756124,0.187416755247,2.1));+#8247 = SURFACE_CURVE('',#8248,(#8252,#8259),.PCURVE_S1.);+#8248 = LINE('',#8249,#8250);+#8249 = CARTESIAN_POINT('',(0.497825756124,1.841948661994,2.1));+#8250 = VECTOR('',#8251,1.);+#8251 = DIRECTION('',(0.,1.,0.));+#8252 = PCURVE('',#5046,#8253);+#8253 = DEFINITIONAL_REPRESENTATION('',(#8254),#8258);+#8254 = LINE('',#8255,#8256);+#8255 = CARTESIAN_POINT('',(3.181857101254,1.378247490068));+#8256 = VECTOR('',#8257,1.);+#8257 = DIRECTION('',(-0.856052609391,0.51688870171));+#8258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8259 = PCURVE('',#8260,#8265);+#8260 = PLANE('',#8261);+#8261 = AXIS2_PLACEMENT_3D('',#8262,#8263,#8264);+#8262 = CARTESIAN_POINT('',(0.497825756124,-0.169487856467,2.1500001));+#8263 = DIRECTION('',(1.,0.,0.));+#8264 = DIRECTION('',(0.,1.,0.));+#8265 = DEFINITIONAL_REPRESENTATION('',(#8266),#8269);+#8266 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8267,#8268),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-2.011436518461,-1.654531906747),.PIECEWISE_BEZIER_KNOTS.);+#8267 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8268 = CARTESIAN_POINT('',(0.356904611713,-5.00001E-02));+#8269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8270 = ORIENTED_EDGE('',*,*,#8271,.T.);+#8271 = EDGE_CURVE('',#8245,#8272,#8274,.T.);+#8272 = VERTEX_POINT('',#8273);+#8273 = CARTESIAN_POINT('',(0.707952449825,0.187416755247,2.1));+#8274 = SURFACE_CURVE('',#8275,(#8279,#8286),.PCURVE_S1.);+#8275 = LINE('',#8276,#8277);+#8276 = CARTESIAN_POINT('',(-0.914433417052,0.187416755247,2.1));+#8277 = VECTOR('',#8278,1.);+#8278 = DIRECTION('',(1.,0.,-0.));+#8279 = PCURVE('',#5046,#8280);+#8280 = DEFINITIONAL_REPRESENTATION('',(#8281),#8285);+#8281 = LINE('',#8282,#8283);+#8282 = CARTESIAN_POINT('',(3.868242646844,-0.685929509482));+#8283 = VECTOR('',#8284,1.);+#8284 = DIRECTION('',(0.51688870171,0.856052609391));+#8285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8286 = PCURVE('',#8287,#8292);+#8287 = PLANE('',#8288);+#8288 = AXIS2_PLACEMENT_3D('',#8289,#8290,#8291);+#8289 = CARTESIAN_POINT('',(0.497825756124,0.187416755247,2.1500001));+#8290 = DIRECTION('',(0.,-1.,0.));+#8291 = DIRECTION('',(1.,0.,0.));+#8292 = DEFINITIONAL_REPRESENTATION('',(#8293),#8296);+#8293 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8294,#8295),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.412259173176,1.622385866877),.PIECEWISE_BEZIER_KNOTS.);+#8294 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8295 = CARTESIAN_POINT('',(0.210126693701,-5.00001E-02));+#8296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8297 = ORIENTED_EDGE('',*,*,#8298,.T.);+#8298 = EDGE_CURVE('',#8272,#8299,#8301,.T.);+#8299 = VERTEX_POINT('',#8300);+#8300 = CARTESIAN_POINT('',(0.707952449825,0.146777918012,2.1));+#8301 = SURFACE_CURVE('',#8302,(#8306,#8313),.PCURVE_S1.);+#8302 = LINE('',#8303,#8304);+#8303 = CARTESIAN_POINT('',(0.707952449825,2.020400967851,2.1));+#8304 = VECTOR('',#8305,1.);+#8305 = DIRECTION('',(0.,-1.,0.));+#8306 = PCURVE('',#5046,#8307);+#8307 = DEFINITIONAL_REPRESENTATION('',(#8308),#8312);+#8308 = LINE('',#8309,#8310);+#8309 = CARTESIAN_POINT('',(3.137704653075,1.650366975205));+#8310 = VECTOR('',#8311,1.);+#8311 = DIRECTION('',(0.856052609391,-0.51688870171));+#8312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8313 = PCURVE('',#8314,#8319);+#8314 = PLANE('',#8315);+#8315 = AXIS2_PLACEMENT_3D('',#8316,#8317,#8318);+#8316 = CARTESIAN_POINT('',(0.707952449825,0.187416755247,2.1500001));+#8317 = DIRECTION('',(-1.,0.,0.));+#8318 = DIRECTION('',(0.,-1.,0.));+#8319 = DEFINITIONAL_REPRESENTATION('',(#8320),#8323);+#8320 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8321,#8322),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.832984212604,1.873623049839),.PIECEWISE_BEZIER_KNOTS.);+#8321 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8322 = CARTESIAN_POINT('',(4.063883723462E-02,-5.00001E-02));+#8323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8324 = ORIENTED_EDGE('',*,*,#8325,.T.);+#8325 = EDGE_CURVE('',#8299,#8326,#8328,.T.);+#8326 = VERTEX_POINT('',#8327);+#8327 = CARTESIAN_POINT('',(0.546353308822,0.146777918012,2.1));+#8328 = SURFACE_CURVE('',#8329,(#8333,#8340),.PCURVE_S1.);+#8329 = LINE('',#8330,#8331);+#8330 = CARTESIAN_POINT('',(-0.809370070201,0.146777918012,2.1));+#8331 = VECTOR('',#8332,1.);+#8332 = DIRECTION('',(-1.,0.,0.));+#8333 = PCURVE('',#5046,#8334);+#8334 = DEFINITIONAL_REPRESENTATION('',(#8335),#8339);+#8335 = LINE('',#8336,#8337);+#8336 = CARTESIAN_POINT('',(3.957337686453,-0.616995513076));+#8337 = VECTOR('',#8338,1.);+#8338 = DIRECTION('',(-0.51688870171,-0.856052609391));+#8339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8340 = PCURVE('',#8341,#8346);+#8341 = PLANE('',#8342);+#8342 = AXIS2_PLACEMENT_3D('',#8343,#8344,#8345);+#8343 = CARTESIAN_POINT('',(0.707952449825,0.146777918012,2.1500001));+#8344 = DIRECTION('',(0.,1.,0.));+#8345 = DIRECTION('',(-1.,0.,0.));+#8346 = DEFINITIONAL_REPRESENTATION('',(#8347),#8350);+#8347 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8348,#8349),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.517322520027,-1.355723379023),.PIECEWISE_BEZIER_KNOTS.);+#8348 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8349 = CARTESIAN_POINT('',(0.161599141004,-5.00001E-02));+#8350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8351 = ORIENTED_EDGE('',*,*,#8352,.T.);+#8352 = EDGE_CURVE('',#8326,#8353,#8355,.T.);+#8353 = VERTEX_POINT('',#8354);+#8354 = CARTESIAN_POINT('',(0.546353308822,4.159504516955E-02,2.1));+#8355 = SURFACE_CURVE('',#8356,(#8360,#8367),.PCURVE_S1.);+#8356 = LINE('',#8357,#8358);+#8357 = CARTESIAN_POINT('',(0.546353308822,2.000081549234,2.1));+#8358 = VECTOR('',#8359,1.);+#8359 = DIRECTION('',(0.,-1.,0.));+#8360 = PCURVE('',#5046,#8361);+#8361 = DEFINITIONAL_REPRESENTATION('',(#8362),#8366);+#8362 = LINE('',#8363,#8364);+#8363 = CARTESIAN_POINT('',(3.071570374213,1.501526730965));+#8364 = VECTOR('',#8365,1.);+#8365 = DIRECTION('',(0.856052609391,-0.51688870171));+#8366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8367 = PCURVE('',#8368,#8373);+#8368 = PLANE('',#8369);+#8369 = AXIS2_PLACEMENT_3D('',#8370,#8371,#8372);+#8370 = CARTESIAN_POINT('',(0.546353308822,0.146777918012,2.1500001));+#8371 = DIRECTION('',(-1.,0.,0.));+#8372 = DIRECTION('',(0.,-1.,0.));+#8373 = DEFINITIONAL_REPRESENTATION('',(#8374),#8377);+#8374 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8375,#8376),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.853303631221,1.958486504064),.PIECEWISE_BEZIER_KNOTS.);+#8375 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8376 = CARTESIAN_POINT('',(0.105182872843,-5.00001E-02));+#8377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8378 = ORIENTED_EDGE('',*,*,#8379,.T.);+#8379 = EDGE_CURVE('',#8353,#8380,#8382,.T.);+#8380 = VERTEX_POINT('',#8381);+#8381 = CARTESIAN_POINT('',(0.69289217485,4.159504516955E-02,2.1));+#8382 = SURFACE_CURVE('',#8383,(#8387,#8394),.PCURVE_S1.);+#8383 = LINE('',#8384,#8385);+#8384 = CARTESIAN_POINT('',(-0.890169640703,4.159504516955E-02,2.1));+#8385 = VECTOR('',#8386,1.);+#8386 = DIRECTION('',(1.,0.,-0.));+#8387 = PCURVE('',#5046,#8388);+#8388 = DEFINITIONAL_REPRESENTATION('',(#8389),#8393);+#8389 = LINE('',#8390,#8391);+#8390 = CARTESIAN_POINT('',(4.005615374117,-0.740532034828));+#8391 = VECTOR('',#8392,1.);+#8392 = DIRECTION('',(0.51688870171,0.856052609391));+#8393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8394 = PCURVE('',#8395,#8400);+#8395 = PLANE('',#8396);+#8396 = AXIS2_PLACEMENT_3D('',#8397,#8398,#8399);+#8397 = CARTESIAN_POINT('',(0.546353308822,4.159504516955E-02,2.1500001)+ );+#8398 = DIRECTION('',(0.,-1.,0.));+#8399 = DIRECTION('',(1.,0.,0.));+#8400 = DEFINITIONAL_REPRESENTATION('',(#8401),#8404);+#8401 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8402,#8403),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.436522949525,1.583061815553),.PIECEWISE_BEZIER_KNOTS.);+#8402 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8403 = CARTESIAN_POINT('',(0.146538866028,-5.00001E-02));+#8404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8405 = ORIENTED_EDGE('',*,*,#8406,.T.);+#8406 = EDGE_CURVE('',#8380,#8407,#8409,.T.);+#8407 = VERTEX_POINT('',#8408);+#8408 = CARTESIAN_POINT('',(0.69289217485,9.562079349322E-04,2.1));+#8409 = SURFACE_CURVE('',#8410,(#8414,#8421),.PCURVE_S1.);+#8410 = LINE('',#8411,#8412);+#8411 = CARTESIAN_POINT('',(0.69289217485,1.947490112812,2.1));+#8412 = VECTOR('',#8413,1.);+#8413 = DIRECTION('',(0.,-1.,0.));+#8414 = PCURVE('',#5046,#8415);+#8415 = DEFINITIONAL_REPRESENTATION('',(#8416),#8420);+#8416 = LINE('',#8417,#8418);+#8417 = CARTESIAN_POINT('',(3.192335694805,1.599787790313));+#8418 = VECTOR('',#8419,1.);+#8419 = DIRECTION('',(0.856052609391,-0.51688870171));+#8420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8421 = PCURVE('',#8422,#8427);+#8422 = PLANE('',#8423);+#8423 = AXIS2_PLACEMENT_3D('',#8424,#8425,#8426);+#8424 = CARTESIAN_POINT('',(0.69289217485,4.159504516955E-02,2.1500001)+ );+#8425 = DIRECTION('',(-1.,0.,0.));+#8426 = DIRECTION('',(0.,-1.,0.));+#8427 = DEFINITIONAL_REPRESENTATION('',(#8428),#8431);+#8428 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8429,#8430),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.905895067643,1.946533904877),.PIECEWISE_BEZIER_KNOTS.);+#8429 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8430 = CARTESIAN_POINT('',(4.063883723462E-02,-5.00001E-02));+#8431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8432 = ORIENTED_EDGE('',*,*,#8433,.T.);+#8433 = EDGE_CURVE('',#8407,#8434,#8436,.T.);+#8434 = VERTEX_POINT('',#8435);+#8435 = CARTESIAN_POINT('',(0.546353308822,9.562079349322E-04,2.1));+#8436 = SURFACE_CURVE('',#8437,(#8441,#8448),.PCURVE_S1.);+#8437 = LINE('',#8438,#8439);+#8438 = CARTESIAN_POINT('',(-0.816900207689,9.562079349323E-04,2.1));+#8439 = VECTOR('',#8440,1.);+#8440 = DIRECTION('',(-1.,0.,0.));+#8441 = PCURVE('',#5046,#8442);+#8442 = DEFINITIONAL_REPRESENTATION('',(#8443),#8447);+#8443 = LINE('',#8444,#8445);+#8444 = CARTESIAN_POINT('',(4.07827649888,-0.698815301324));+#8445 = VECTOR('',#8446,1.);+#8446 = DIRECTION('',(-0.51688870171,-0.856052609391));+#8447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8448 = PCURVE('',#8449,#8454);+#8449 = PLANE('',#8450);+#8450 = AXIS2_PLACEMENT_3D('',#8451,#8452,#8453);+#8451 = CARTESIAN_POINT('',(0.69289217485,9.562079349322E-04,2.1500001)+ );+#8452 = DIRECTION('',(0.,1.,0.));+#8453 = DIRECTION('',(-1.,0.,0.));+#8454 = DEFINITIONAL_REPRESENTATION('',(#8455),#8458);+#8455 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8456,#8457),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.509792382539,-1.363253516511),.PIECEWISE_BEZIER_KNOTS.);+#8456 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8457 = CARTESIAN_POINT('',(0.146538866028,-5.00001E-02));+#8458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8459 = ORIENTED_EDGE('',*,*,#8460,.T.);+#8460 = EDGE_CURVE('',#8434,#8216,#8461,.T.);+#8461 = SURFACE_CURVE('',#8462,(#8466,#8473),.PCURVE_S1.);+#8462 = LINE('',#8463,#8464);+#8463 = CARTESIAN_POINT('',(0.546353308822,1.927170694195,2.1));+#8464 = VECTOR('',#8465,1.);+#8465 = DIRECTION('',(0.,-1.,0.));+#8466 = PCURVE('',#5046,#8467);+#8467 = DEFINITIONAL_REPRESENTATION('',(#8468),#8472);+#8468 = LINE('',#8469,#8470);+#8469 = CARTESIAN_POINT('',(3.133985901922,1.463839933763));+#8470 = VECTOR('',#8471,1.);+#8471 = DIRECTION('',(0.856052609391,-0.51688870171));+#8472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8473 = PCURVE('',#8474,#8479);+#8474 = PLANE('',#8475);+#8475 = AXIS2_PLACEMENT_3D('',#8476,#8477,#8478);+#8476 = CARTESIAN_POINT('',(0.546353308822,9.562079349322E-04,2.1500001)+ );+#8477 = DIRECTION('',(-1.,0.,0.));+#8478 = DIRECTION('',(0.,-1.,0.));+#8479 = DEFINITIONAL_REPRESENTATION('',(#8480),#8483);+#8480 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8481,#8482),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.92621448626,2.096658550662),.PIECEWISE_BEZIER_KNOTS.);+#8481 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8482 = CARTESIAN_POINT('',(0.170444064402,-5.00001E-02));+#8483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8484 = FACE_BOUND('',#8485,.T.);+#8485 = EDGE_LOOP('',(#8486,#8515,#8542,#8569,#8596,#8623,#8650,#8677,+ #8704,#8731));+#8486 = ORIENTED_EDGE('',*,*,#8487,.T.);+#8487 = EDGE_CURVE('',#8488,#8490,#8492,.T.);+#8488 = VERTEX_POINT('',#8489);+#8489 = CARTESIAN_POINT('',(0.816721102424,-0.169487856467,2.1));+#8490 = VERTEX_POINT('',#8491);+#8491 = CARTESIAN_POINT('',(0.770105965596,-0.169487856467,2.1));+#8492 = SURFACE_CURVE('',#8493,(#8497,#8504),.PCURVE_S1.);+#8493 = LINE('',#8494,#8495);+#8494 = CARTESIAN_POINT('',(-0.754985743902,-0.169487856467,2.1));+#8495 = VECTOR('',#8496,1.);+#8496 = DIRECTION('',(-1.,0.,0.));+#8497 = PCURVE('',#5046,#8498);+#8498 = DEFINITIONAL_REPRESENTATION('',(#8499),#8503);+#8499 = LINE('',#8500,#8501);+#8500 = CARTESIAN_POINT('',(4.25618847177,-0.733913874203));+#8501 = VECTOR('',#8502,1.);+#8502 = DIRECTION('',(-0.51688870171,-0.856052609391));+#8503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8504 = PCURVE('',#8505,#8510);+#8505 = PLANE('',#8506);+#8506 = AXIS2_PLACEMENT_3D('',#8507,#8508,#8509);+#8507 = CARTESIAN_POINT('',(0.816721102424,-0.169487856467,2.1500001));+#8508 = DIRECTION('',(0.,1.,0.));+#8509 = DIRECTION('',(-1.,0.,0.));+#8510 = DEFINITIONAL_REPRESENTATION('',(#8511),#8514);+#8511 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8512,#8513),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.571706846326,-1.525091709498),.PIECEWISE_BEZIER_KNOTS.);+#8512 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8513 = CARTESIAN_POINT('',(4.661513682794E-02,-5.00001E-02));+#8514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8515 = ORIENTED_EDGE('',*,*,#8516,.T.);+#8516 = EDGE_CURVE('',#8490,#8517,#8519,.T.);+#8517 = VERTEX_POINT('',#8518);+#8518 = CARTESIAN_POINT('',(0.770105965596,0.187416755247,2.1));+#8519 = SURFACE_CURVE('',#8520,(#8524,#8531),.PCURVE_S1.);+#8520 = LINE('',#8521,#8522);+#8521 = CARTESIAN_POINT('',(0.770105965596,1.841948661994,2.1));+#8522 = VECTOR('',#8523,1.);+#8523 = DIRECTION('',(0.,1.,0.));+#8524 = PCURVE('',#5046,#8525);+#8525 = DEFINITIONAL_REPRESENTATION('',(#8526),#8530);+#8526 = LINE('',#8527,#8528);+#8527 = CARTESIAN_POINT('',(3.322595665229,1.611333673872));+#8528 = VECTOR('',#8529,1.);+#8529 = DIRECTION('',(-0.856052609391,0.51688870171));+#8530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8531 = PCURVE('',#8532,#8537);+#8532 = PLANE('',#8533);+#8533 = AXIS2_PLACEMENT_3D('',#8534,#8535,#8536);+#8534 = CARTESIAN_POINT('',(0.770105965596,-0.169487856467,2.1500001));+#8535 = DIRECTION('',(1.,0.,0.));+#8536 = DIRECTION('',(0.,1.,0.));+#8537 = DEFINITIONAL_REPRESENTATION('',(#8538),#8541);+#8538 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8539,#8540),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-2.011436518461,-1.654531906747),.PIECEWISE_BEZIER_KNOTS.);+#8539 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8540 = CARTESIAN_POINT('',(0.356904611713,-5.00001E-02));+#8541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8542 = ORIENTED_EDGE('',*,*,#8543,.T.);+#8543 = EDGE_CURVE('',#8517,#8544,#8546,.T.);+#8544 = VERTEX_POINT('',#8545);+#8545 = CARTESIAN_POINT('',(0.831303273432,0.187416755247,2.1));+#8546 = SURFACE_CURVE('',#8547,(#8551,#8558),.PCURVE_S1.);+#8547 = LINE('',#8548,#8549);+#8548 = CARTESIAN_POINT('',(-0.778293312316,0.187416755247,2.1));+#8549 = VECTOR('',#8550,1.);+#8550 = DIRECTION('',(1.,0.,-0.));+#8551 = PCURVE('',#5046,#8552);+#8552 = DEFINITIONAL_REPRESENTATION('',(#8553),#8557);+#8553 = LINE('',#8554,#8555);+#8554 = CARTESIAN_POINT('',(3.938611928832,-0.56938641758));+#8555 = VECTOR('',#8556,1.);+#8556 = DIRECTION('',(0.51688870171,0.856052609391));+#8557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8558 = PCURVE('',#8559,#8564);+#8559 = PLANE('',#8560);+#8560 = AXIS2_PLACEMENT_3D('',#8561,#8562,#8563);+#8561 = CARTESIAN_POINT('',(0.770105965596,0.187416755247,2.1500001));+#8562 = DIRECTION('',(0.,-1.,0.));+#8563 = DIRECTION('',(1.,0.,0.));+#8564 = DEFINITIONAL_REPRESENTATION('',(#8565),#8568);+#8565 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8566,#8567),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.548399277912,1.609596585748),.PIECEWISE_BEZIER_KNOTS.);+#8566 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8567 = CARTESIAN_POINT('',(6.119730783566E-02,-5.00001E-02));+#8568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8569 = ORIENTED_EDGE('',*,*,#8570,.T.);+#8570 = EDGE_CURVE('',#8544,#8571,#8573,.T.);+#8571 = VERTEX_POINT('',#8572);+#8572 = CARTESIAN_POINT('',(0.951785473233,-0.106378132761,2.1));+#8573 = SURFACE_CURVE('',#8574,(#8578,#8585),.PCURVE_S1.);+#8574 = LINE('',#8575,#8576);+#8575 = CARTESIAN_POINT('',(-3.948614659166E-02,2.310829844946,2.1));+#8576 = VECTOR('',#8577,1.);+#8577 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#8578 = PCURVE('',#5046,#8579);+#8579 = DEFINITIONAL_REPRESENTATION('',(#8580),#8584);+#8580 = LINE('',#8581,#8582);+#8581 = CARTESIAN_POINT('',(2.502739689285,1.160639619604));+#8582 = VECTOR('',#8583,1.);+#8583 = DIRECTION('',(0.988159491629,-0.153430176642));+#8584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8585 = PCURVE('',#8586,#8591);+#8586 = PLANE('',#8587);+#8587 = AXIS2_PLACEMENT_3D('',#8588,#8589,#8590);+#8588 = CARTESIAN_POINT('',(0.831303273432,0.187416755247,2.1500001));+#8589 = DIRECTION('',(-0.92522283611,-0.379424173637,0.));+#8590 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#8591 = DEFINITIONAL_REPRESENTATION('',(#8592),#8595);+#8592 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8593,#8594),.UNSPECIFIED.,.F.,+ .F.,(2,2),(2.29502883719,2.612568435805),.PIECEWISE_BEZIER_KNOTS.);+#8593 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8594 = CARTESIAN_POINT('',(0.317539598615,-5.00001E-02));+#8595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8596 = ORIENTED_EDGE('',*,*,#8597,.T.);+#8597 = EDGE_CURVE('',#8571,#8598,#8600,.T.);+#8598 = VERTEX_POINT('',#8599);+#8599 = CARTESIAN_POINT('',(0.951785473233,0.187416755247,2.1));+#8600 = SURFACE_CURVE('',#8601,(#8605,#8612),.PCURVE_S1.);+#8601 = LINE('',#8602,#8603);+#8602 = CARTESIAN_POINT('',(0.951785473233,1.873503523847,2.1));+#8603 = VECTOR('',#8604,1.);+#8604 = DIRECTION('',(0.,1.,0.));+#8605 = PCURVE('',#5046,#8606);+#8606 = DEFINITIONAL_REPRESENTATION('',(#8607),#8611);+#8607 = LINE('',#8608,#8609);+#8608 = CARTESIAN_POINT('',(3.389491128231,1.783171242033));+#8609 = VECTOR('',#8610,1.);+#8610 = DIRECTION('',(-0.856052609391,0.51688870171));+#8611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8612 = PCURVE('',#8613,#8618);+#8613 = PLANE('',#8614);+#8614 = AXIS2_PLACEMENT_3D('',#8615,#8616,#8617);+#8615 = CARTESIAN_POINT('',(0.951785473233,-0.106378132761,2.1500001));+#8616 = DIRECTION('',(1.,0.,0.));+#8617 = DIRECTION('',(0.,1.,0.));+#8618 = DEFINITIONAL_REPRESENTATION('',(#8619),#8622);+#8619 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8620,#8621),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.979881656608,-1.6860867686),.PIECEWISE_BEZIER_KNOTS.);+#8620 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8621 = CARTESIAN_POINT('',(0.293794888008,-5.00001E-02));+#8622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8623 = ORIENTED_EDGE('',*,*,#8624,.T.);+#8624 = EDGE_CURVE('',#8598,#8625,#8627,.T.);+#8625 = VERTEX_POINT('',#8626);+#8626 = CARTESIAN_POINT('',(0.998400610061,0.187416755247,2.1));+#8627 = SURFACE_CURVE('',#8628,(#8632,#8639),.PCURVE_S1.);+#8628 = LINE('',#8629,#8630);+#8629 = CARTESIAN_POINT('',(-0.687453558497,0.187416755247,2.1));+#8630 = VECTOR('',#8631,1.);+#8631 = DIRECTION('',(1.,0.,-0.));+#8632 = PCURVE('',#5046,#8633);+#8633 = DEFINITIONAL_REPRESENTATION('',(#8634),#8638);+#8634 = LINE('',#8635,#8636);+#8635 = CARTESIAN_POINT('',(3.985565971247,-0.491622809287));+#8636 = VECTOR('',#8637,1.);+#8637 = DIRECTION('',(0.51688870171,0.856052609391));+#8638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8639 = PCURVE('',#8640,#8645);+#8640 = PLANE('',#8641);+#8641 = AXIS2_PLACEMENT_3D('',#8642,#8643,#8644);+#8642 = CARTESIAN_POINT('',(0.951785473233,0.187416755247,2.1500001));+#8643 = DIRECTION('',(0.,-1.,0.));+#8644 = DIRECTION('',(1.,0.,0.));+#8645 = DEFINITIONAL_REPRESENTATION('',(#8646),#8649);+#8646 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8647,#8648),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.639239031731,1.685854168559),.PIECEWISE_BEZIER_KNOTS.);+#8647 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8648 = CARTESIAN_POINT('',(4.661513682794E-02,-5.00001E-02));+#8649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8650 = ORIENTED_EDGE('',*,*,#8651,.T.);+#8651 = EDGE_CURVE('',#8625,#8652,#8654,.T.);+#8652 = VERTEX_POINT('',#8653);+#8653 = CARTESIAN_POINT('',(0.998400610061,-0.169487856467,2.1));+#8654 = SURFACE_CURVE('',#8655,(#8659,#8666),.PCURVE_S1.);+#8655 = LINE('',#8656,#8657);+#8656 = CARTESIAN_POINT('',(0.998400610061,2.020400967851,2.1));+#8657 = VECTOR('',#8658,1.);+#8658 = DIRECTION('',(0.,-1.,0.));+#8659 = PCURVE('',#5046,#8660);+#8660 = DEFINITIONAL_REPRESENTATION('',(#8661),#8665);+#8661 = LINE('',#8662,#8663);+#8662 = CARTESIAN_POINT('',(3.287834025533,1.899005880667));+#8663 = VECTOR('',#8664,1.);+#8664 = DIRECTION('',(0.856052609391,-0.51688870171));+#8665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8666 = PCURVE('',#8667,#8672);+#8667 = PLANE('',#8668);+#8668 = AXIS2_PLACEMENT_3D('',#8669,#8670,#8671);+#8669 = CARTESIAN_POINT('',(0.998400610061,0.187416755247,2.1500001));+#8670 = DIRECTION('',(-1.,0.,0.));+#8671 = DIRECTION('',(0.,-1.,0.));+#8672 = DEFINITIONAL_REPRESENTATION('',(#8673),#8676);+#8673 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8674,#8675),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.832984212604,2.189888824318),.PIECEWISE_BEZIER_KNOTS.);+#8674 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8675 = CARTESIAN_POINT('',(0.356904611713,-5.00001E-02));+#8676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8677 = ORIENTED_EDGE('',*,*,#8678,.T.);+#8678 = EDGE_CURVE('',#8652,#8679,#8681,.T.);+#8679 = VERTEX_POINT('',#8680);+#8680 = CARTESIAN_POINT('',(0.937203302225,-0.169487856467,2.1));+#8681 = SURFACE_CURVE('',#8682,(#8686,#8693),.PCURVE_S1.);+#8682 = LINE('',#8683,#8684);+#8683 = CARTESIAN_POINT('',(-0.664145990083,-0.169487856467,2.1));+#8684 = VECTOR('',#8685,1.);+#8685 = DIRECTION('',(-1.,0.,0.));+#8686 = PCURVE('',#5046,#8687);+#8687 = DEFINITIONAL_REPRESENTATION('',(#8688),#8692);+#8688 = LINE('',#8689,#8690);+#8689 = CARTESIAN_POINT('',(4.303142514185,-0.656150265911));+#8690 = VECTOR('',#8691,1.);+#8691 = DIRECTION('',(-0.51688870171,-0.856052609391));+#8692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8693 = PCURVE('',#8694,#8699);+#8694 = PLANE('',#8695);+#8695 = AXIS2_PLACEMENT_3D('',#8696,#8697,#8698);+#8696 = CARTESIAN_POINT('',(0.998400610061,-0.169487856467,2.1500001));+#8697 = DIRECTION('',(0.,1.,0.));+#8698 = DIRECTION('',(-1.,0.,0.));+#8699 = DEFINITIONAL_REPRESENTATION('',(#8700),#8703);+#8700 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8701,#8702),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.662546600145,-1.601349292309),.PIECEWISE_BEZIER_KNOTS.);+#8701 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8702 = CARTESIAN_POINT('',(6.119730783566E-02,-5.00001E-02));+#8703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8704 = ORIENTED_EDGE('',*,*,#8705,.T.);+#8705 = EDGE_CURVE('',#8679,#8706,#8708,.T.);+#8706 = VERTEX_POINT('',#8707);+#8707 = CARTESIAN_POINT('',(0.816721102424,0.124307031541,2.1));+#8708 = SURFACE_CURVE('',#8709,(#8713,#8720),.PCURVE_S1.);+#8709 = LINE('',#8710,#8711);+#8710 = CARTESIAN_POINT('',(-3.854967841633E-03,2.125275266375,2.1));+#8711 = VECTOR('',#8712,1.);+#8712 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#8713 = PCURVE('',#5046,#8714);+#8714 = DEFINITIONAL_REPRESENTATION('',(#8715),#8719);+#8715 = LINE('',#8716,#8717);+#8716 = CARTESIAN_POINT('',(2.68000152418,1.095230717934));+#8717 = VECTOR('',#8718,1.);+#8718 = DIRECTION('',(-0.988159491629,0.153430176642));+#8719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8720 = PCURVE('',#8721,#8726);+#8721 = PLANE('',#8722);+#8722 = AXIS2_PLACEMENT_3D('',#8723,#8724,#8725);+#8723 = CARTESIAN_POINT('',(0.937203302225,-0.169487856467,2.1500001));+#8724 = DIRECTION('',(0.92522283611,0.379424173637,0.));+#8725 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#8726 = DEFINITIONAL_REPRESENTATION('',(#8727),#8730);+#8727 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8728,#8729),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-2.480227501182,-2.162687902567),.PIECEWISE_BEZIER_KNOTS.);+#8728 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8729 = CARTESIAN_POINT('',(0.317539598615,-5.00001E-02));+#8730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8731 = ORIENTED_EDGE('',*,*,#8732,.T.);+#8732 = EDGE_CURVE('',#8706,#8488,#8733,.T.);+#8733 = SURFACE_CURVE('',#8734,(#8738,#8745),.PCURVE_S1.);+#8734 = LINE('',#8735,#8736);+#8735 = CARTESIAN_POINT('',(0.816721102424,1.988846105998,2.1));+#8736 = VECTOR('',#8737,1.);+#8737 = DIRECTION('',(0.,-1.,0.));+#8738 = PCURVE('',#5046,#8739);+#8739 = DEFINITIONAL_REPRESENTATION('',(#8740),#8744);+#8740 = LINE('',#8741,#8742);+#8741 = CARTESIAN_POINT('',(3.220938562532,1.727168312506));+#8742 = VECTOR('',#8743,1.);+#8743 = DIRECTION('',(0.856052609391,-0.51688870171));+#8744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8745 = PCURVE('',#8746,#8751);+#8746 = PLANE('',#8747);+#8747 = AXIS2_PLACEMENT_3D('',#8748,#8749,#8750);+#8748 = CARTESIAN_POINT('',(0.816721102424,0.124307031541,2.1500001));+#8749 = DIRECTION('',(-1.,0.,0.));+#8750 = DIRECTION('',(0.,-1.,0.));+#8751 = DEFINITIONAL_REPRESENTATION('',(#8752),#8755);+#8752 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8753,#8754),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.864539074457,2.158333962465),.PIECEWISE_BEZIER_KNOTS.);+#8753 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8754 = CARTESIAN_POINT('',(0.293794888008,-5.00001E-02));+#8755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8756 = FACE_BOUND('',#8757,.T.);+#8757 = EDGE_LOOP('',(#8758,#8787,#8814,#8850,#8886,#8931,#8967,#9003,+ #9048,#9084,#9120,#9147,#9183,#9219,#9264,#9300,#9336,#9381,#9417,+ #9453,#9480,#9507));+#8758 = ORIENTED_EDGE('',*,*,#8759,.T.);+#8759 = EDGE_CURVE('',#8760,#8762,#8764,.T.);+#8760 = VERTEX_POINT('',#8761);+#8761 = CARTESIAN_POINT('',(1.197530912511,1.362596307278E-02,2.1));+#8762 = VERTEX_POINT('',#8763);+#8763 = CARTESIAN_POINT('',(1.295542225841,1.362596307278E-02,2.1));+#8764 = SURFACE_CURVE('',#8765,(#8769,#8776),.PCURVE_S1.);+#8765 = LINE('',#8766,#8767);+#8766 = CARTESIAN_POINT('',(-0.564580838859,1.362596307278E-02,2.1));+#8767 = VECTOR('',#8768,1.);+#8768 = DIRECTION('',(1.,0.,-0.));+#8769 = PCURVE('',#5046,#8770);+#8770 = DEFINITIONAL_REPRESENTATION('',(#8771),#8775);+#8771 = LINE('',#8772,#8773);+#8772 = CARTESIAN_POINT('',(4.197851552905,-0.476267793953));+#8773 = VECTOR('',#8774,1.);+#8774 = DIRECTION('',(0.51688870171,0.856052609391));+#8775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8776 = PCURVE('',#8777,#8782);+#8777 = PLANE('',#8778);+#8778 = AXIS2_PLACEMENT_3D('',#8779,#8780,#8781);+#8779 = CARTESIAN_POINT('',(1.197530912511,1.362596307278E-02,2.1500001)+ );+#8780 = DIRECTION('',(0.,-1.,0.));+#8781 = DIRECTION('',(1.,0.,0.));+#8782 = DEFINITIONAL_REPRESENTATION('',(#8783),#8786);+#8783 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8784,#8785),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.762111751369,1.8601230647),.PIECEWISE_BEZIER_KNOTS.);+#8784 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8785 = CARTESIAN_POINT('',(9.801131333055E-02,-5.00001E-02));+#8786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8787 = ORIENTED_EDGE('',*,*,#8788,.T.);+#8788 = EDGE_CURVE('',#8762,#8789,#8791,.T.);+#8789 = VERTEX_POINT('',#8790);+#8790 = CARTESIAN_POINT('',(1.295542225841,-0.140084462468,2.1));+#8791 = SURFACE_CURVE('',#8792,(#8796,#8803),.PCURVE_S1.);+#8792 = LINE('',#8793,#8794);+#8793 = CARTESIAN_POINT('',(1.295542225841,1.933505571764,2.1));+#8794 = VECTOR('',#8795,1.);+#8795 = DIRECTION('',(0.,-1.,0.));+#8796 = PCURVE('',#5046,#8797);+#8797 = DEFINITIONAL_REPRESENTATION('',(#8798),#8802);+#8798 = LINE('',#8799,#8800);+#8799 = CARTESIAN_POINT('',(3.515810200102,2.108459487747));+#8800 = VECTOR('',#8801,1.);+#8801 = DIRECTION('',(0.856052609391,-0.51688870171));+#8802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8803 = PCURVE('',#8804,#8809);+#8804 = PLANE('',#8805);+#8805 = AXIS2_PLACEMENT_3D('',#8806,#8807,#8808);+#8806 = CARTESIAN_POINT('',(1.295542225841,1.362596307278E-02,2.1500001)+ );+#8807 = DIRECTION('',(-1.,0.,0.));+#8808 = DIRECTION('',(0.,-1.,0.));+#8809 = DEFINITIONAL_REPRESENTATION('',(#8810),#8813);+#8810 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8811,#8812),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.919879608691,2.073590034231),.PIECEWISE_BEZIER_KNOTS.);+#8811 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8812 = CARTESIAN_POINT('',(0.15371042554,-5.00001E-02));+#8813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8814 = ORIENTED_EDGE('',*,*,#8815,.F.);+#8815 = EDGE_CURVE('',#8816,#8789,#8818,.T.);+#8816 = VERTEX_POINT('',#8817);+#8817 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.1));+#8818 = SURFACE_CURVE('',#8819,(#8825,#8834),.PCURVE_S1.);+#8819 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8820,#8821,#8822,#8823,#8824),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8820 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.1));+#8821 = CARTESIAN_POINT('',(1.264047000664,-0.162615159849,2.1));+#8822 = CARTESIAN_POINT('',(1.275362641408,-0.156559018197,2.1));+#8823 = CARTESIAN_POINT('',(1.28586116435,-0.149048408293,2.1));+#8824 = CARTESIAN_POINT('',(1.295542225841,-0.140084462468,2.1));+#8825 = PCURVE('',#5046,#8826);+#8826 = DEFINITIONAL_REPRESENTATION('',(#8827),#8833);+#8827 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8828,#8829,#8830,#8831,#8832),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8828 = CARTESIAN_POINT('',(5.291588824977,0.985272799896));+#8829 = CARTESIAN_POINT('',(5.293920295946,0.998036794459));+#8830 = CARTESIAN_POINT('',(5.294584846935,1.010853929442));+#8831 = CARTESIAN_POINT('',(5.293581937622,1.023723366803));+#8832 = CARTESIAN_POINT('',(5.290912359713,1.036644227074));+#8833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8834 = PCURVE('',#8835,#8842);+#8835 = SURFACE_OF_LINEAR_EXTRUSION('',#8836,#8840);+#8836 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8837,#8838,#8839),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8837 = CARTESIAN_POINT('',(1.295542225841,-0.140084462468,2.1500001));+#8838 = CARTESIAN_POINT('',(1.276179015159,-0.158013361248,2.1500001));+#8839 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.1500001));+#8840 = VECTOR('',#8841,1.);+#8841 = DIRECTION('',(0.,0.,1.));+#8842 = DEFINITIONAL_REPRESENTATION('',(#8843),#8849);+#8843 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8844,#8845,#8846,#8847,#8848),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8844 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8845 = CARTESIAN_POINT('',(0.750002603073,-5.00001E-02));+#8846 = CARTESIAN_POINT('',(0.49999237148,-5.00001E-02));+#8847 = CARTESIAN_POINT('',(0.249985956621,-5.00001E-02));+#8848 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8850 = ORIENTED_EDGE('',*,*,#8851,.F.);+#8851 = EDGE_CURVE('',#8852,#8816,#8854,.T.);+#8852 = VERTEX_POINT('',#8853);+#8853 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.1));+#8854 = SURFACE_CURVE('',#8855,(#8861,#8870),.PCURVE_S1.);+#8855 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8856,#8857,#8858,#8859,#8860),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8856 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.1));+#8857 = CARTESIAN_POINT('',(1.213545206378,-0.176420363995,2.1));+#8858 = CARTESIAN_POINT('',(1.226991980692,-0.174886923305,2.1));+#8859 = CARTESIAN_POINT('',(1.239782275797,-0.171819021005,2.1));+#8860 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.1));+#8861 = PCURVE('',#5046,#8862);+#8862 = DEFINITIONAL_REPRESENTATION('',(#8863),#8869);+#8863 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8864,#8865,#8866,#8867,#8868),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8864 = CARTESIAN_POINT('',(5.272345368686,0.935596898177));+#8865 = CARTESIAN_POINT('',(5.279634470096,0.947668847634));+#8866 = CARTESIAN_POINT('',(5.285272249909,0.959972612041));+#8867 = CARTESIAN_POINT('',(5.289257123171,0.972507541578));+#8868 = CARTESIAN_POINT('',(5.291588824977,0.985272799896));+#8869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8870 = PCURVE('',#8871,#8878);+#8871 = SURFACE_OF_LINEAR_EXTRUSION('',#8872,#8876);+#8872 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8873,#8874,#8875),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8873 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.1500001));+#8874 = CARTESIAN_POINT('',(1.227651462461,-0.176420363995,2.1500001));+#8875 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.1500001));+#8876 = VECTOR('',#8877,1.);+#8877 = DIRECTION('',(0.,0.,1.));+#8878 = DEFINITIONAL_REPRESENTATION('',(#8879),#8885);+#8879 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8880,#8881,#8882,#8883,#8884),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8880 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8881 = CARTESIAN_POINT('',(0.750038801622,-5.00001E-02));+#8882 = CARTESIAN_POINT('',(0.500040642563,-5.00001E-02));+#8883 = CARTESIAN_POINT('',(0.250022149031,-5.00001E-02));+#8884 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8886 = ORIENTED_EDGE('',*,*,#8887,.F.);+#8887 = EDGE_CURVE('',#8888,#8852,#8890,.T.);+#8888 = VERTEX_POINT('',#8889);+#8889 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.1));+#8890 = SURFACE_CURVE('',#8891,(#8900,#8912),.PCURVE_S1.);+#8891 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8892,#8893,#8894,#8895,#8896,+ #8897,#8898,#8899),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.375873973207,+ 1.),.UNSPECIFIED.);+#8892 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.1));+#8893 = CARTESIAN_POINT('',(1.100878844268,-0.136913388242,2.1));+#8894 = CARTESIAN_POINT('',(1.10868850123,-0.144914172877,2.1));+#8895 = CARTESIAN_POINT('',(1.11721111805,-0.151769744635,2.1));+#8896 = CARTESIAN_POINT('',(1.141774555658,-0.166957320405,2.1));+#8897 = CARTESIAN_POINT('',(1.159063235102,-0.173273944857,2.1));+#8898 = CARTESIAN_POINT('',(1.178296854404,-0.176420363995,2.1));+#8899 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.1));+#8900 = PCURVE('',#5046,#8901);+#8901 = DEFINITIONAL_REPRESENTATION('',(#8902),#8911);+#8902 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8903,#8904,#8905,#8906,#8907,+ #8908,#8909,#8910),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.375873973207,+ 1.),.UNSPECIFIED.);+#8903 = CARTESIAN_POINT('',(5.17608594491,0.870290668614));+#8904 = CARTESIAN_POINT('',(5.187578450776,0.871641223765));+#8905 = CARTESIAN_POINT('',(5.198464266788,0.874191185804));+#8906 = CARTESIAN_POINT('',(5.208738241223,0.877943426585));+#8907 = CARTESIAN_POINT('',(5.234436168466,0.891120735124));+#8908 = CARTESIAN_POINT('',(5.248779854382,0.902655762462));+#8909 = CARTESIAN_POINT('',(5.261414995206,0.91749440395));+#8910 = CARTESIAN_POINT('',(5.272345368686,0.935596898177));+#8911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8912 = PCURVE('',#8913,#8920);+#8913 = SURFACE_OF_LINEAR_EXTRUSION('',#8914,#8918);+#8914 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8915,#8916,#8917),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8915 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.1500001));+#8916 = CARTESIAN_POINT('',(1.131552565,-0.176420363995,2.1500001));+#8917 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.1500001));+#8918 = VECTOR('',#8919,1.);+#8919 = DIRECTION('',(0.,0.,1.));+#8920 = DEFINITIONAL_REPRESENTATION('',(#8921),#8930);+#8921 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8922,#8923,#8924,#8925,#8926,+ #8927,#8928,#8929),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.375873973207,+ 1.),.UNSPECIFIED.);+#8922 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8923 = CARTESIAN_POINT('',(0.90605702148,-5.00001E-02));+#8924 = CARTESIAN_POINT('',(0.812057049334,-5.00001E-02));+#8925 = CARTESIAN_POINT('',(0.718028468265,-5.00001E-02));+#8926 = CARTESIAN_POINT('',(0.467868906903,-5.00001E-02));+#8927 = CARTESIAN_POINT('',(0.311737875513,-5.00001E-02));+#8928 = CARTESIAN_POINT('',(0.155738961561,-5.00001E-02));+#8929 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8931 = ORIENTED_EDGE('',*,*,#8932,.F.);+#8932 = EDGE_CURVE('',#8933,#8888,#8935,.T.);+#8933 = VERTEX_POINT('',#8934);+#8934 = CARTESIAN_POINT('',(1.056012138141,8.60587141439E-03,2.1));+#8935 = SURFACE_CURVE('',#8936,(#8942,#8951),.PCURVE_S1.);+#8936 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8937,#8938,#8939,#8940,#8941),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8937 = CARTESIAN_POINT('',(1.056012138141,8.605871414389E-03,2.1));+#8938 = CARTESIAN_POINT('',(1.056012138141,-3.505146648001E-02,2.1));+#8939 = CARTESIAN_POINT('',(1.062247069673,-7.244987999368E-02,2.1));+#8940 = CARTESIAN_POINT('',(1.074843085916,-0.103379990617,2.1));+#8941 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.1));+#8942 = PCURVE('',#5046,#8943);+#8943 = DEFINITIONAL_REPRESENTATION('',(#8944),#8950);+#8944 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8945,#8946,#8947,#8948,#8949),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8945 = CARTESIAN_POINT('',(5.03981521535,0.908450224108));+#8946 = CARTESIAN_POINT('',(5.077188193374,0.885884239403));+#8947 = CARTESIAN_POINT('',(5.112425968514,0.871890851403));+#8948 = CARTESIAN_POINT('',(5.145414508904,0.866686279252));+#8949 = CARTESIAN_POINT('',(5.17608594491,0.870290668614));+#8950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8951 = PCURVE('',#8952,#8959);+#8952 = SURFACE_OF_LINEAR_EXTRUSION('',#8953,#8957);+#8953 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8954,#8955,#8956),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8954 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.1500001));+#8955 = CARTESIAN_POINT('',(1.056012138141,-7.912620661564E-02,2.1500001+ ));+#8956 = CARTESIAN_POINT('',(1.056012138141,8.60587141439E-03,2.1500001)+ );+#8957 = VECTOR('',#8958,1.);+#8958 = DIRECTION('',(0.,0.,1.));+#8959 = DEFINITIONAL_REPRESENTATION('',(#8960),#8966);+#8960 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8961,#8962,#8963,#8964,#8965),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8961 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8962 = CARTESIAN_POINT('',(0.751189423101,-5.00001E-02));+#8963 = CARTESIAN_POINT('',(0.50127864482,-5.00001E-02));+#8964 = CARTESIAN_POINT('',(0.250716953055,-5.00001E-02));+#8965 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8967 = ORIENTED_EDGE('',*,*,#8968,.F.);+#8968 = EDGE_CURVE('',#8969,#8933,#8971,.T.);+#8969 = VERTEX_POINT('',#8970);+#8970 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.1));+#8971 = SURFACE_CURVE('',#8972,(#8978,#8987),.PCURVE_S1.);+#8972 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8973,#8974,#8975,#8976,#8977),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8973 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.1));+#8974 = CARTESIAN_POINT('',(1.075083365099,0.120474309417,2.1));+#8975 = CARTESIAN_POINT('',(1.062327252135,8.950666243155E-02,2.1));+#8976 = CARTESIAN_POINT('',(1.056012138141,5.214856558634E-02,2.1));+#8977 = CARTESIAN_POINT('',(1.056012138141,8.605871414389E-03,2.1));+#8978 = PCURVE('',#5046,#8979);+#8979 = DEFINITIONAL_REPRESENTATION('',(#8980),#8986);+#8980 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8981,#8982,#8983,#8984,#8985),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8981 = CARTESIAN_POINT('',(4.942837605496,1.011685641277));+#8982 = CARTESIAN_POINT('',(4.953907648832,0.982599729391));+#8983 = CARTESIAN_POINT('',(4.973824093172,0.955672998757));+#8984 = CARTESIAN_POINT('',(5.002540378384,0.930956950767));+#8985 = CARTESIAN_POINT('',(5.03981521535,0.908450224108));+#8986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8987 = PCURVE('',#8988,#8995);+#8988 = SURFACE_OF_LINEAR_EXTRUSION('',#8989,#8993);+#8989 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8990,#8991,#8992),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8990 = CARTESIAN_POINT('',(1.056012138141,8.60587141439E-03,2.1500001)+ );+#8991 = CARTESIAN_POINT('',(1.056012138141,9.609889746068E-02,2.1500001)+ );+#8992 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.1500001));+#8993 = VECTOR('',#8994,1.);+#8994 = DIRECTION('',(0.,0.,1.));+#8995 = DEFINITIONAL_REPRESENTATION('',(#8996),#9002);+#8996 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8997,#8998,#8999,#9000,#9001),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8997 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8998 = CARTESIAN_POINT('',(0.749308051388,-5.00001E-02));+#8999 = CARTESIAN_POINT('',(0.498754661651,-5.00001E-02));+#9000 = CARTESIAN_POINT('',(0.248835228015,-5.00001E-02));+#9001 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9003 = ORIENTED_EDGE('',*,*,#9004,.F.);+#9004 = EDGE_CURVE('',#9005,#8969,#9007,.T.);+#9005 = VERTEX_POINT('',#9006);+#9006 = CARTESIAN_POINT('',(1.200638588299,0.193871158808,2.1));+#9007 = SURFACE_CURVE('',#9008,(#9017,#9029),.PCURVE_S1.);+#9008 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9009,#9010,#9011,#9012,#9013,+ #9014,#9015,#9016),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.619122722305,+ 1.),.UNSPECIFIED.);+#9009 = CARTESIAN_POINT('',(1.200638588299,0.193871158807,2.1));+#9010 = CARTESIAN_POINT('',(1.1795872661,0.193871158807,2.1));+#9011 = CARTESIAN_POINT('',(1.160403165765,0.190759619069,2.1));+#9012 = CARTESIAN_POINT('',(1.14311753508,0.184513313902,2.1));+#9013 = CARTESIAN_POINT('',(1.118285247385,0.169373482215,2.1));+#9014 = CARTESIAN_POINT('',(1.109550561256,0.162423589879,2.1));+#9015 = CARTESIAN_POINT('',(1.101542219568,0.154292032785,2.1));+#9016 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.1));+#9017 = PCURVE('',#5046,#9018);+#9018 = DEFINITIONAL_REPRESENTATION('',(#9019),#9028);+#9019 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9020,#9021,#9022,#9023,#9024,+ #9025,#9026,#9027),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.619122722305,+ 1.),.UNSPECIFIED.);+#9020 = CARTESIAN_POINT('',(4.955974160703,1.128019608025));+#9021 = CARTESIAN_POINT('',(4.945092970102,1.109998568726));+#9022 = CARTESIAN_POINT('',(4.937840567099,1.091967649839));+#9023 = CARTESIAN_POINT('',(4.934252985733,1.073941596018));+#9024 = CARTESIAN_POINT('',(4.934377949207,1.044858243395));+#9025 = CARTESIAN_POINT('',(4.935812562103,1.033788571715));+#9026 = CARTESIAN_POINT('',(4.938634181434,1.022729899927));+#9027 = CARTESIAN_POINT('',(4.942837605496,1.011685641277));+#9028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9029 = PCURVE('',#9030,#9037);+#9030 = SURFACE_OF_LINEAR_EXTRUSION('',#9031,#9035);+#9031 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9032,#9033,#9034),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9032 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.1500001));+#9033 = CARTESIAN_POINT('',(1.132508772935,0.193871158808,2.1500001));+#9034 = CARTESIAN_POINT('',(1.200638588299,0.193871158808,2.1500001));+#9035 = VECTOR('',#9036,1.);+#9036 = DIRECTION('',(0.,0.,1.));+#9037 = DEFINITIONAL_REPRESENTATION('',(#9038),#9047);+#9038 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9039,#9040,#9041,#9042,#9043,+ #9044,#9045,#9046),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.619122722305,+ 1.),.UNSPECIFIED.);+#9039 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9040 = CARTESIAN_POINT('',(0.845505803248,-5.00001E-02));+#9041 = CARTESIAN_POINT('',(0.690756965471,-5.00001E-02));+#9042 = CARTESIAN_POINT('',(0.535878623915,-5.00001E-02));+#9043 = CARTESIAN_POINT('',(0.285720426945,-5.00001E-02));+#9044 = CARTESIAN_POINT('',(0.190440654725,-5.00001E-02));+#9045 = CARTESIAN_POINT('',(9.519064531086E-02,-5.00001E-02));+#9046 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9048 = ORIENTED_EDGE('',*,*,#9049,.F.);+#9049 = EDGE_CURVE('',#9050,#9005,#9052,.T.);+#9050 = VERTEX_POINT('',#9051);+#9051 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.1));+#9052 = SURFACE_CURVE('',#9053,(#9059,#9068),.PCURVE_S1.);+#9053 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9054,#9055,#9056,#9057,#9058),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9054 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.1));+#9055 = CARTESIAN_POINT('',(1.233388427274,0.190703807164,2.1));+#9056 = CARTESIAN_POINT('',(1.2227901445,0.192815465495,2.1));+#9057 = CARTESIAN_POINT('',(1.211873395126,0.193871158807,2.1));+#9058 = CARTESIAN_POINT('',(1.200638588299,0.193871158807,2.1));+#9059 = PCURVE('',#5046,#9060);+#9060 = DEFINITIONAL_REPRESENTATION('',(#9061),#9067);+#9061 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9062,#9063,#9064,#9065,#9066),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9062 = CARTESIAN_POINT('',(4.983638537688,1.161580574785));+#9063 = CARTESIAN_POINT('',(4.975613602092,1.154418024858));+#9064 = CARTESIAN_POINT('',(4.968327778843,1.146436829567));+#9065 = CARTESIAN_POINT('',(4.961781305417,1.137637193725));+#9066 = CARTESIAN_POINT('',(4.955974160703,1.128019608025));+#9067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9068 = PCURVE('',#9069,#9076);+#9069 = SURFACE_OF_LINEAR_EXTRUSION('',#9070,#9074);+#9070 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9071,#9072,#9073),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9071 = CARTESIAN_POINT('',(1.200638588299,0.193871158808,2.1500001));+#9072 = CARTESIAN_POINT('',(1.22310947477,0.193871158808,2.1500001));+#9073 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.1500001));+#9074 = VECTOR('',#9075,1.);+#9075 = DIRECTION('',(0.,0.,1.));+#9076 = DEFINITIONAL_REPRESENTATION('',(#9077),#9083);+#9077 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9078,#9079,#9080,#9081,#9082),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9078 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9079 = CARTESIAN_POINT('',(0.749993122147,-5.00001E-02));+#9080 = CARTESIAN_POINT('',(0.499985972903,-5.00001E-02));+#9081 = CARTESIAN_POINT('',(0.249985839251,-5.00001E-02));+#9082 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9084 = ORIENTED_EDGE('',*,*,#9085,.F.);+#9085 = EDGE_CURVE('',#9086,#9050,#9088,.T.);+#9086 = VERTEX_POINT('',#9087);+#9087 = CARTESIAN_POINT('',(1.283350574671,0.168292596548,2.1));+#9088 = SURFACE_CURVE('',#9089,(#9095,#9104),.PCURVE_S1.);+#9089 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9090,#9091,#9092,#9093,#9094),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9090 = CARTESIAN_POINT('',(1.283350574671,0.168292596548,2.1));+#9091 = CARTESIAN_POINT('',(1.273789303366,0.174746454679,2.1));+#9092 = CARTESIAN_POINT('',(1.263988289928,0.180105336195,2.1));+#9093 = CARTESIAN_POINT('',(1.253947739808,0.184368670162,2.1));+#9094 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.1));+#9095 = PCURVE('',#5046,#9096);+#9096 = DEFINITIONAL_REPRESENTATION('',(#9097),#9103);+#9097 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9098,#9099,#9100,#9101,#9102),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9098 = CARTESIAN_POINT('',(5.020623646921,1.185604149949));+#9099 = CARTESIAN_POINT('',(5.010156691717,1.180755125049));+#9100 = CARTESIAN_POINT('',(5.0005031741,1.175134887231));+#9101 = CARTESIAN_POINT('',(4.991663689016,1.16874331726));+#9102 = CARTESIAN_POINT('',(4.983638537688,1.161580574785));+#9103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9104 = PCURVE('',#9105,#9112);+#9105 = SURFACE_OF_LINEAR_EXTRUSION('',#9106,#9110);+#9106 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9107,#9108,#9109),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9107 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.1500001));+#9108 = CARTESIAN_POINT('',(1.264226415972,0.18120140367,2.1500001));+#9109 = CARTESIAN_POINT('',(1.283350574671,0.168292596548,2.1500001));+#9110 = VECTOR('',#9111,1.);+#9111 = DIRECTION('',(0.,0.,1.));+#9112 = DEFINITIONAL_REPRESENTATION('',(#9113),#9119);+#9113 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9114,#9115,#9116,#9117,#9118),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9114 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9115 = CARTESIAN_POINT('',(0.750021126284,-5.00001E-02));+#9116 = CARTESIAN_POINT('',(0.500023152274,-5.00001E-02));+#9117 = CARTESIAN_POINT('',(0.250013598678,-5.00001E-02));+#9118 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9120 = ORIENTED_EDGE('',*,*,#9121,.T.);+#9121 = EDGE_CURVE('',#9086,#9122,#9124,.T.);+#9122 = VERTEX_POINT('',#9123);+#9123 = CARTESIAN_POINT('',(1.283350574671,0.118808835915,2.1));+#9124 = SURFACE_CURVE('',#9125,(#9129,#9136),.PCURVE_S1.);+#9125 = LINE('',#9126,#9127);+#9126 = CARTESIAN_POINT('',(1.283350574671,2.010838888502,2.1));+#9127 = VECTOR('',#9128,1.);+#9128 = DIRECTION('',(0.,-1.,0.));+#9129 = PCURVE('',#5046,#9130);+#9130 = DEFINITIONAL_REPRESENTATION('',(#9131),#9135);+#9131 = LINE('',#9132,#9133);+#9132 = CARTESIAN_POINT('',(3.443307085771,2.137995510637));+#9133 = VECTOR('',#9134,1.);+#9134 = DIRECTION('',(0.856052609391,-0.51688870171));+#9135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9136 = PCURVE('',#9137,#9142);+#9137 = PLANE('',#9138);+#9138 = AXIS2_PLACEMENT_3D('',#9139,#9140,#9141);+#9139 = CARTESIAN_POINT('',(1.283350574671,0.168292596548,2.1500001));+#9140 = DIRECTION('',(-1.,0.,0.));+#9141 = DIRECTION('',(0.,-1.,0.));+#9142 = DEFINITIONAL_REPRESENTATION('',(#9143),#9146);+#9143 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9144,#9145),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.842546291953,1.892030052586),.PIECEWISE_BEZIER_KNOTS.);+#9144 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9145 = CARTESIAN_POINT('',(4.948376063274E-02,-5.00001E-02));+#9146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9147 = ORIENTED_EDGE('',*,*,#9148,.F.);+#9148 = EDGE_CURVE('',#9149,#9122,#9151,.T.);+#9149 = VERTEX_POINT('',#9150);+#9150 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.1));+#9151 = SURFACE_CURVE('',#9152,(#9158,#9167),.PCURVE_S1.);+#9152 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9153,#9154,#9155,#9156,#9157),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9153 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.1));+#9154 = CARTESIAN_POINT('',(1.253829613322,0.141577696302,2.1));+#9155 = CARTESIAN_POINT('',(1.263830972144,0.135600310998,2.1));+#9156 = CARTESIAN_POINT('',(1.273671443971,0.128009984852,2.1));+#9157 = CARTESIAN_POINT('',(1.283350574671,0.118808835915,2.1));+#9158 = PCURVE('',#5046,#9159);+#9159 = DEFINITIONAL_REPRESENTATION('',(#9160),#9166);+#9160 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9161,#9162,#9163,#9164,#9165),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9161 = CARTESIAN_POINT('',(5.019246084643,1.14008056589));+#9162 = CARTESIAN_POINT('',(5.028233955601,1.14652402385));+#9163 = CARTESIAN_POINT('',(5.038520501265,1.151996070238));+#9164 = CARTESIAN_POINT('',(5.050104648475,1.156496677995));+#9165 = CARTESIAN_POINT('',(5.062984349333,1.160026553159));+#9166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9167 = PCURVE('',#9168,#9175);+#9168 = SURFACE_OF_LINEAR_EXTRUSION('',#9169,#9173);+#9169 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9170,#9171,#9172),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9170 = CARTESIAN_POINT('',(1.283350574671,0.118808835915,2.1500001));+#9171 = CARTESIAN_POINT('',(1.263987363988,0.137215838663,2.1500001));+#9172 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.1500001));+#9173 = VECTOR('',#9174,1.);+#9174 = DIRECTION('',(0.,0.,1.));+#9175 = DEFINITIONAL_REPRESENTATION('',(#9176),#9182);+#9176 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9177,#9178,#9179,#9180,#9181),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9177 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9178 = CARTESIAN_POINT('',(0.749951803689,-5.00001E-02));+#9179 = CARTESIAN_POINT('',(0.499925253392,-5.00001E-02));+#9180 = CARTESIAN_POINT('',(0.249936099407,-5.00001E-02));+#9181 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9183 = ORIENTED_EDGE('',*,*,#9184,.F.);+#9184 = EDGE_CURVE('',#9185,#9149,#9187,.T.);+#9185 = VERTEX_POINT('',#9186);+#9186 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.1));+#9187 = SURFACE_CURVE('',#9188,(#9194,#9203),.PCURVE_S1.);+#9188 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9189,#9190,#9191,#9192,#9193),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9189 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.1));+#9190 = CARTESIAN_POINT('',(1.211992945451,0.154666633475,2.1));+#9191 = CARTESIAN_POINT('',(1.222949745797,0.153212557364,2.1));+#9192 = CARTESIAN_POINT('',(1.233508241676,0.150303932362,2.1));+#9193 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.1));+#9194 = PCURVE('',#5046,#9195);+#9195 = DEFINITIONAL_REPRESENTATION('',(#9196),#9202);+#9196 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9197,#9198,#9199,#9200,#9201),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9197 = CARTESIAN_POINT('',(4.989535296914,1.107755231825));+#9198 = CARTESIAN_POINT('',(4.99540423584,1.117475158893));+#9199 = CARTESIAN_POINT('',(5.002312447796,1.126103160907));+#9200 = CARTESIAN_POINT('',(5.010259951045,1.133638353453));+#9201 = CARTESIAN_POINT('',(5.019246084643,1.14008056589));+#9202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9203 = PCURVE('',#9204,#9211);+#9204 = SURFACE_OF_LINEAR_EXTRUSION('',#9205,#9209);+#9205 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9206,#9207,#9208),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9206 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.1500001));+#9207 = CARTESIAN_POINT('',(1.223348526754,0.154666633475,2.1500001));+#9208 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.1500001));+#9209 = VECTOR('',#9210,1.);+#9210 = DIRECTION('',(0.,0.,1.));+#9211 = DEFINITIONAL_REPRESENTATION('',(#9212),#9218);+#9212 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9213,#9214,#9215,#9216,#9217),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9213 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9214 = CARTESIAN_POINT('',(0.750013475939,-5.00001E-02));+#9215 = CARTESIAN_POINT('',(0.500008893456,-5.00001E-02));+#9216 = CARTESIAN_POINT('',(0.249999861871,-5.00001E-02));+#9217 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9219 = ORIENTED_EDGE('',*,*,#9220,.F.);+#9220 = EDGE_CURVE('',#9221,#9185,#9223,.T.);+#9221 = VERTEX_POINT('',#9222);+#9222 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.1));+#9223 = SURFACE_CURVE('',#9224,(#9233,#9245),.PCURVE_S1.);+#9224 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9225,#9226,#9227,#9228,#9229,+ #9230,#9231,#9232),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.409946854434,+ 1.),.UNSPECIFIED.);+#9225 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.1));+#9226 = CARTESIAN_POINT('',(1.13482375203,0.125681422208,2.1));+#9227 = CARTESIAN_POINT('',(1.140309946379,0.132134277981,2.1));+#9228 = CARTESIAN_POINT('',(1.14645755182,0.137566282132,2.1));+#9229 = CARTESIAN_POINT('',(1.163063584596,0.14832430351,2.1));+#9230 = CARTESIAN_POINT('',(1.174229326082,0.152555269855,2.1));+#9231 = CARTESIAN_POINT('',(1.186758088867,0.154666633475,2.1));+#9232 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.1));+#9233 = PCURVE('',#5046,#9234);+#9234 = DEFINITIONAL_REPRESENTATION('',(#9235),#9244);+#9235 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9236,#9237,#9238,#9239,#9240,+ #9241,#9242,#9243),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.409946854434,+ 1.),.UNSPECIFIED.);+#9236 = CARTESIAN_POINT('',(4.984230114627,1.028440395723));+#9237 = CARTESIAN_POINT('',(4.98032921738,1.036432141279));+#9238 = CARTESIAN_POINT('',(4.977640985233,1.044464020511));+#9239 = CARTESIAN_POINT('',(4.976168531699,1.052534435763));+#9240 = CARTESIAN_POINT('',(4.975542570149,1.072310773155));+#9241 = CARTESIAN_POINT('',(4.97769208599,1.084056173991));+#9242 = CARTESIAN_POINT('',(4.982360623583,1.095872794067));+#9243 = CARTESIAN_POINT('',(4.989535296914,1.107755231825));+#9244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9245 = PCURVE('',#9246,#9253);+#9246 = SURFACE_OF_LINEAR_EXTRUSION('',#9247,#9251);+#9247 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9248,#9249,#9250),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9248 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.1500001));+#9249 = CARTESIAN_POINT('',(1.153545347504,0.154666633475,2.1500001));+#9250 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.1500001));+#9251 = VECTOR('',#9252,1.);+#9252 = DIRECTION('',(0.,0.,1.));+#9253 = DEFINITIONAL_REPRESENTATION('',(#9254),#9263);+#9254 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9255,#9256,#9257,#9258,#9259,+ #9260,#9261,#9262),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.409946854434,+ 1.),.UNSPECIFIED.);+#9255 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9256 = CARTESIAN_POINT('',(0.897543153923,-5.00001E-02));+#9257 = CARTESIAN_POINT('',(0.79504325894,-5.00001E-02));+#9258 = CARTESIAN_POINT('',(0.692521690408,-5.00001E-02));+#9259 = CARTESIAN_POINT('',(0.442436370081,-5.00001E-02));+#9260 = CARTESIAN_POINT('',(0.294872416634,-5.00001E-02));+#9261 = CARTESIAN_POINT('',(0.14737252308,-5.00001E-02));+#9262 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9264 = ORIENTED_EDGE('',*,*,#9265,.F.);+#9265 = EDGE_CURVE('',#9266,#9221,#9268,.T.);+#9266 = VERTEX_POINT('',#9267);+#9267 = CARTESIAN_POINT('',(1.106452106708,8.60587141439E-03,2.1));+#9268 = SURFACE_CURVE('',#9269,(#9275,#9284),.PCURVE_S1.);+#9269 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9270,#9271,#9272,#9273,#9274),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9270 = CARTESIAN_POINT('',(1.106452106708,8.605871414389E-03,2.1));+#9271 = CARTESIAN_POINT('',(1.106452106708,4.503358138758E-02,2.1));+#9272 = CARTESIAN_POINT('',(1.110344883497,7.552212140623E-02,2.1));+#9273 = CARTESIAN_POINT('',(1.118192377606,9.99323399783E-02,2.1));+#9274 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.1));+#9275 = PCURVE('',#5046,#9276);+#9276 = DEFINITIONAL_REPRESENTATION('',(#9277),#9283);+#9277 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9278,#9279,#9280,#9281,#9282),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9278 = CARTESIAN_POINT('',(5.065887065217,0.951629490818));+#9279 = CARTESIAN_POINT('',(5.034703029041,0.970458562532));+#9280 = CARTESIAN_POINT('',(5.010615367142,0.989550166127));+#9281 = CARTESIAN_POINT('',(4.993775216879,1.008885400122));+#9282 = CARTESIAN_POINT('',(4.984230114627,1.028440395723));+#9283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9284 = PCURVE('',#9285,#9292);+#9285 = SURFACE_OF_LINEAR_EXTRUSION('',#9286,#9290);+#9286 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9287,#9288,#9289),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9287 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.1500001));+#9288 = CARTESIAN_POINT('',(1.106452106708,8.17557784367E-02,2.1500001)+ );+#9289 = CARTESIAN_POINT('',(1.106452106708,8.60587141439E-03,2.1500001)+ );+#9290 = VECTOR('',#9291,1.);+#9291 = DIRECTION('',(0.,0.,1.));+#9292 = DEFINITIONAL_REPRESENTATION('',(#9293),#9299);+#9293 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9294,#9295,#9296,#9297,#9298),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9294 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9295 = CARTESIAN_POINT('',(0.751006450616,-5.00001E-02));+#9296 = CARTESIAN_POINT('',(0.501143190324,-5.00001E-02));+#9297 = CARTESIAN_POINT('',(0.25070157205,-5.00001E-02));+#9298 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9300 = ORIENTED_EDGE('',*,*,#9301,.F.);+#9301 = EDGE_CURVE('',#9302,#9266,#9304,.T.);+#9302 = VERTEX_POINT('',#9303);+#9303 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.1));+#9304 = SURFACE_CURVE('',#9305,(#9311,#9320),.PCURVE_S1.);+#9305 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9306,#9307,#9308,#9309,#9310),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9306 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.1));+#9307 = CARTESIAN_POINT('',(1.117832263177,-8.355430486726E-02,2.1));+#9308 = CARTESIAN_POINT('',(1.110224103238,-5.917768002356E-02,2.1));+#9309 = CARTESIAN_POINT('',(1.106452106708,-2.840625978258E-02,2.1));+#9310 = CARTESIAN_POINT('',(1.106452106708,8.605871414389E-03,2.1));+#9311 = PCURVE('',#5046,#9312);+#9312 = DEFINITIONAL_REPRESENTATION('',(#9313),#9319);+#9313 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9314,#9315,#9316,#9317,#9318),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9314 = CARTESIAN_POINT('',(5.171924572242,0.914271827817));+#9315 = CARTESIAN_POINT('',(5.150663298907,0.91373494959));+#9316 = CARTESIAN_POINT('',(5.125863053688,0.919821966389));+#9317 = CARTESIAN_POINT('',(5.097571396708,0.932498338376));+#9318 = CARTESIAN_POINT('',(5.065887065217,0.951629490818));+#9319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9320 = PCURVE('',#9321,#9328);+#9321 = SURFACE_OF_LINEAR_EXTRUSION('',#9322,#9326);+#9322 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9323,#9324,#9325),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9323 = CARTESIAN_POINT('',(1.106452106708,8.60587141439E-03,2.1500001)+ );+#9324 = CARTESIAN_POINT('',(1.106452106708,-6.573929552659E-02,2.1500001+ ));+#9325 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.1500001));+#9326 = VECTOR('',#9327,1.);+#9327 = DIRECTION('',(0.,0.,1.));+#9328 = DEFINITIONAL_REPRESENTATION('',(#9329),#9335);+#9329 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9330,#9331,#9332,#9333,#9334),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9330 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9331 = CARTESIAN_POINT('',(0.749242738373,-5.00001E-02));+#9332 = CARTESIAN_POINT('',(0.498770638664,-5.00001E-02));+#9333 = CARTESIAN_POINT('',(0.248920896407,-5.00001E-02));+#9334 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9336 = ORIENTED_EDGE('',*,*,#9337,.F.);+#9337 = EDGE_CURVE('',#9338,#9302,#9340,.T.);+#9338 = VERTEX_POINT('',#9339);+#9339 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.1));+#9340 = SURFACE_CURVE('',#9341,(#9350,#9362),.PCURVE_S1.);+#9341 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9342,#9343,#9344,#9345,#9346,+ #9347,#9348,#9349),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.620068235077,+ 1.),.UNSPECIFIED.);+#9342 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.1));+#9343 = CARTESIAN_POINT('',(1.184784243303,-0.137215838663,2.1));+#9344 = CARTESIAN_POINT('',(1.171678067521,-0.134930556621,2.1));+#9345 = CARTESIAN_POINT('',(1.160138448739,-0.130350189284,2.1));+#9346 = CARTESIAN_POINT('',(1.144062353191,-0.119267308686,2.1));+#9347 = CARTESIAN_POINT('',(1.138544464166,-0.114196163224,2.1));+#9348 = CARTESIAN_POINT('',(1.133617597936,-0.108265378652,2.1));+#9349 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.1));+#9350 = PCURVE('',#5046,#9351);+#9351 = DEFINITIONAL_REPRESENTATION('',(#9352),#9361);+#9352 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9353,#9354,#9355,#9356,#9357,+ #9358,#9359,#9360),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.620068235077,+ 1.),.UNSPECIFIED.);+#9353 = CARTESIAN_POINT('',(5.238784232475,0.955861274378));+#9354 = CARTESIAN_POINT('',(5.231207117021,0.943312326345));+#9355 = CARTESIAN_POINT('',(5.222476361182,0.933273986836));+#9356 = CARTESIAN_POINT('',(5.2125906272,0.925763006193));+#9357 = CARTESIAN_POINT('',(5.194793546189,0.917729638413));+#9358 = CARTESIAN_POINT('',(5.187600244389,0.915627252909));+#9359 = CARTESIAN_POINT('',(5.179976539292,0.914475151754));+#9360 = CARTESIAN_POINT('',(5.171924572242,0.914271827817));+#9361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9362 = PCURVE('',#9363,#9370);+#9363 = SURFACE_OF_LINEAR_EXTRUSION('',#9364,#9368);+#9364 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9365,#9366,#9367),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9365 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.1500001));+#9366 = CARTESIAN_POINT('',(1.152111035601,-0.137215838663,2.1500001));+#9367 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.1500001));+#9368 = VECTOR('',#9369,1.);+#9369 = DIRECTION('',(0.,0.,1.));+#9370 = DEFINITIONAL_REPRESENTATION('',(#9371),#9380);+#9371 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9372,#9373,#9374,#9375,#9376,+ #9377,#9378,#9379),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.620068235077,+ 1.),.UNSPECIFIED.);+#9372 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9373 = CARTESIAN_POINT('',(0.845147105528,-5.00001E-02));+#9374 = CARTESIAN_POINT('',(0.690147135219,-5.00001E-02));+#9375 = CARTESIAN_POINT('',(0.535073256979,-5.00001E-02));+#9376 = CARTESIAN_POINT('',(0.28498262468,-5.00001E-02));+#9377 = CARTESIAN_POINT('',(0.189965451377,-5.00001E-02));+#9378 = CARTESIAN_POINT('',(9.496558255244E-02,-5.00001E-02));+#9379 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9381 = ORIENTED_EDGE('',*,*,#9382,.F.);+#9382 = EDGE_CURVE('',#9383,#9338,#9385,.T.);+#9383 = VERTEX_POINT('',#9384);+#9384 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.1));+#9385 = SURFACE_CURVE('',#9386,(#9392,#9401),.PCURVE_S1.);+#9386 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9387,#9388,#9389,#9390,#9391),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9387 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.1));+#9388 = CARTESIAN_POINT('',(1.221495347302,-0.135363347412,2.1));+#9389 = CARTESIAN_POINT('',(1.214801523064,-0.13659841952,2.1));+#9390 = CARTESIAN_POINT('',(1.207450715175,-0.137215838663,2.1));+#9391 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.1));+#9392 = PCURVE('',#5046,#9393);+#9393 = DEFINITIONAL_REPRESENTATION('',(#9394),#9400);+#9394 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9395,#9396,#9397,#9398,#9399),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9395 = CARTESIAN_POINT('',(5.250130979989,0.981821831303));+#9396 = CARTESIAN_POINT('',(5.248596841936,0.975696494515));+#9397 = CARTESIAN_POINT('',(5.246194166517,0.969327833991));+#9398 = CARTESIAN_POINT('',(5.24292316024,0.962716018738));+#9399 = CARTESIAN_POINT('',(5.238784232475,0.955861274378));+#9400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9401 = PCURVE('',#9402,#9409);+#9402 = SURFACE_OF_LINEAR_EXTRUSION('',#9403,#9407);+#9403 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9404,#9405,#9406),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9404 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.1500001));+#9405 = CARTESIAN_POINT('',(1.215459811291,-0.137215838663,2.1500001));+#9406 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.1500001));+#9407 = VECTOR('',#9408,1.);+#9408 = DIRECTION('',(0.,0.,1.));+#9409 = DEFINITIONAL_REPRESENTATION('',(#9410),#9416);+#9410 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9411,#9412,#9413,#9414,#9415),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9411 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9412 = CARTESIAN_POINT('',(0.749978190332,-5.00001E-02));+#9413 = CARTESIAN_POINT('',(0.499967671092,-5.00001E-02));+#9414 = CARTESIAN_POINT('',(0.249973319353,-5.00001E-02));+#9415 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9417 = ORIENTED_EDGE('',*,*,#9418,.F.);+#9418 = EDGE_CURVE('',#9419,#9383,#9421,.T.);+#9419 = VERTEX_POINT('',#9420);+#9420 = CARTESIAN_POINT('',(1.249405192981,-0.121916511704,2.1));+#9421 = SURFACE_CURVE('',#9422,(#9428,#9437),.PCURVE_S1.);+#9422 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9423,#9424,#9425,#9426,#9427),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9423 = CARTESIAN_POINT('',(1.249405192981,-0.121916511704,2.1));+#9424 = CARTESIAN_POINT('',(1.244504658567,-0.125860844281,2.1));+#9425 = CARTESIAN_POINT('',(1.23922555985,-0.129108007265,2.1));+#9426 = CARTESIAN_POINT('',(1.233567946431,-0.131657896194,2.1));+#9427 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.1));+#9428 = PCURVE('',#5046,#9429);+#9429 = DEFINITIONAL_REPRESENTATION('',(#9430),#9436);+#9430 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9431,#9432,#9433,#9434,#9435),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9431 = CARTESIAN_POINT('',(5.251511927038,1.006539308187));+#9432 = CARTESIAN_POINT('',(5.252355452362,1.00030541197));+#9433 = CARTESIAN_POINT('',(5.252406488226,0.994107803879));+#9434 = CARTESIAN_POINT('',(5.251664970842,0.987946580371));+#9435 = CARTESIAN_POINT('',(5.250130979989,0.981821831303));+#9436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9437 = PCURVE('',#9438,#9445);+#9438 = SURFACE_OF_LINEAR_EXTRUSION('',#9439,#9443);+#9439 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9440,#9441,#9442),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9440 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.1500001));+#9441 = CARTESIAN_POINT('',(1.239604061648,-0.129805227167,2.1500001));+#9442 = CARTESIAN_POINT('',(1.249405192981,-0.121916511704,2.1500001));+#9443 = VECTOR('',#9444,1.);+#9444 = DIRECTION('',(0.,0.,1.));+#9445 = DEFINITIONAL_REPRESENTATION('',(#9446),#9452);+#9446 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9447,#9448,#9449,#9450,#9451),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9447 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9448 = CARTESIAN_POINT('',(0.750001594328,-5.00001E-02));+#9449 = CARTESIAN_POINT('',(0.499999609681,-5.00001E-02));+#9450 = CARTESIAN_POINT('',(0.249997820286,-5.00001E-02));+#9451 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9453 = ORIENTED_EDGE('',*,*,#9454,.T.);+#9454 = EDGE_CURVE('',#9419,#9455,#9457,.T.);+#9455 = VERTEX_POINT('',#9456);+#9456 = CARTESIAN_POINT('',(1.249405192981,-2.60566662269E-02,2.1));+#9457 = SURFACE_CURVE('',#9458,(#9462,#9469),.PCURVE_S1.);+#9458 = LINE('',#9459,#9460);+#9459 = CARTESIAN_POINT('',(1.249405192981,1.865734334376,2.1));+#9460 = VECTOR('',#9461,1.);+#9461 = DIRECTION('',(0.,1.,0.));+#9462 = PCURVE('',#5046,#9463);+#9463 = DEFINITIONAL_REPRESENTATION('',(#9464),#9468);+#9464 = LINE('',#9465,#9466);+#9465 = CARTESIAN_POINT('',(3.549978233694,2.03393357347));+#9466 = VECTOR('',#9467,1.);+#9467 = DIRECTION('',(-0.856052609391,0.51688870171));+#9468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9469 = PCURVE('',#9470,#9475);+#9470 = PLANE('',#9471);+#9471 = AXIS2_PLACEMENT_3D('',#9472,#9473,#9474);+#9472 = CARTESIAN_POINT('',(1.249405192981,-0.121916511704,2.1500001));+#9473 = DIRECTION('',(1.,0.,0.));+#9474 = DIRECTION('',(0.,1.,0.));+#9475 = DEFINITIONAL_REPRESENTATION('',(#9476),#9479);+#9476 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9477,#9478),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.987650846079,-1.891791000602),.PIECEWISE_BEZIER_KNOTS.);+#9477 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9478 = CARTESIAN_POINT('',(9.585984547695E-02,-5.00001E-02));+#9479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9480 = ORIENTED_EDGE('',*,*,#9481,.T.);+#9481 = EDGE_CURVE('',#9455,#9482,#9484,.T.);+#9482 = VERTEX_POINT('',#9483);+#9483 = CARTESIAN_POINT('',(1.197530912511,-2.60566662269E-02,2.1));+#9484 = SURFACE_CURVE('',#9485,(#9489,#9496),.PCURVE_S1.);+#9485 = LINE('',#9486,#9487);+#9486 = CARTESIAN_POINT('',(-0.538643698624,-2.60566662269E-02,2.1));+#9487 = VECTOR('',#9488,1.);+#9488 = DIRECTION('',(-1.,0.,0.));+#9489 = PCURVE('',#5046,#9490);+#9490 = DEFINITIONAL_REPRESENTATION('',(#9491),#9495);+#9491 = LINE('',#9492,#9493);+#9492 = CARTESIAN_POINT('',(4.245228586007,-0.474575740114));+#9493 = VECTOR('',#9494,1.);+#9494 = DIRECTION('',(-0.51688870171,-0.856052609391));+#9495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9496 = PCURVE('',#9497,#9502);+#9497 = PLANE('',#9498);+#9498 = AXIS2_PLACEMENT_3D('',#9499,#9500,#9501);+#9499 = CARTESIAN_POINT('',(1.249405192981,-2.60566662269E-02,2.1500001)+ );+#9500 = DIRECTION('',(0.,1.,0.));+#9501 = DIRECTION('',(-1.,0.,0.));+#9502 = DEFINITIONAL_REPRESENTATION('',(#9503),#9506);+#9503 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9504,#9505),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.788048891604,-1.736174611134),.PIECEWISE_BEZIER_KNOTS.);+#9504 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9505 = CARTESIAN_POINT('',(5.187428047007E-02,-5.00001E-02));+#9506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9507 = ORIENTED_EDGE('',*,*,#9508,.T.);+#9508 = EDGE_CURVE('',#9482,#8760,#9509,.T.);+#9509 = SURFACE_CURVE('',#9510,(#9514,#9521),.PCURVE_S1.);+#9510 = LINE('',#9511,#9512);+#9511 = CARTESIAN_POINT('',(1.197530912511,1.913664257114,2.1));+#9512 = VECTOR('',#9513,1.);+#9513 = DIRECTION('',(0.,1.,0.));+#9514 = PCURVE('',#5046,#9515);+#9515 = DEFINITIONAL_REPRESENTATION('',(#9516),#9520);+#9516 = LINE('',#9517,#9518);+#9517 = CARTESIAN_POINT('',(3.482134468782,2.014300895851));+#9518 = VECTOR('',#9519,1.);+#9519 = DIRECTION('',(-0.856052609391,0.51688870171));+#9520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9521 = PCURVE('',#9522,#9527);+#9522 = PLANE('',#9523);+#9523 = AXIS2_PLACEMENT_3D('',#9524,#9525,#9526);+#9524 = CARTESIAN_POINT('',(1.197530912511,-2.60566662269E-02,2.1500001)+ );+#9525 = DIRECTION('',(1.,0.,0.));+#9526 = DIRECTION('',(0.,1.,0.));+#9527 = DEFINITIONAL_REPRESENTATION('',(#9528),#9531);+#9528 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9529,#9530),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.939720923341,-1.900038294041),.PIECEWISE_BEZIER_KNOTS.);+#9529 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9530 = CARTESIAN_POINT('',(3.968262929969E-02,-5.00001E-02));+#9531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9532 = ADVANCED_FACE('',(#9533),#9522,.T.);+#9533 = FACE_BOUND('',#9534,.T.);+#9534 = EDGE_LOOP('',(#9535,#9536,#9559,#9587));+#9535 = ORIENTED_EDGE('',*,*,#9508,.F.);+#9536 = ORIENTED_EDGE('',*,*,#9537,.T.);+#9537 = EDGE_CURVE('',#9482,#9538,#9540,.T.);+#9538 = VERTEX_POINT('',#9539);+#9539 = CARTESIAN_POINT('',(1.197530912511,-2.60566662269E-02,2.0500001)+ );+#9540 = SURFACE_CURVE('',#9541,(#9545,#9552),.PCURVE_S1.);+#9541 = LINE('',#9542,#9543);+#9542 = CARTESIAN_POINT('',(1.197530912511,-2.60566662269E-02,2.1500001)+ );+#9543 = VECTOR('',#9544,1.);+#9544 = DIRECTION('',(-0.,-0.,-1.));+#9545 = PCURVE('',#9522,#9546);+#9546 = DEFINITIONAL_REPRESENTATION('',(#9547),#9551);+#9547 = LINE('',#9548,#9549);+#9548 = CARTESIAN_POINT('',(0.,0.));+#9549 = VECTOR('',#9550,1.);+#9550 = DIRECTION('',(0.,-1.));+#9551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9552 = PCURVE('',#9497,#9553);+#9553 = DEFINITIONAL_REPRESENTATION('',(#9554),#9558);+#9554 = LINE('',#9555,#9556);+#9555 = CARTESIAN_POINT('',(5.187428047007E-02,0.));+#9556 = VECTOR('',#9557,1.);+#9557 = DIRECTION('',(0.,-1.));+#9558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9559 = ORIENTED_EDGE('',*,*,#9560,.T.);+#9560 = EDGE_CURVE('',#9538,#9561,#9563,.T.);+#9561 = VERTEX_POINT('',#9562);+#9562 = CARTESIAN_POINT('',(1.197530912511,1.362596307278E-02,2.0500001)+ );+#9563 = SURFACE_CURVE('',#9564,(#9568,#9575),.PCURVE_S1.);+#9564 = LINE('',#9565,#9566);+#9565 = CARTESIAN_POINT('',(1.197530912511,-2.60566662269E-02,2.0500001)+ );+#9566 = VECTOR('',#9567,1.);+#9567 = DIRECTION('',(0.,1.,0.));+#9568 = PCURVE('',#9522,#9569);+#9569 = DEFINITIONAL_REPRESENTATION('',(#9570),#9574);+#9570 = LINE('',#9571,#9572);+#9571 = CARTESIAN_POINT('',(0.,-0.1));+#9572 = VECTOR('',#9573,1.);+#9573 = DIRECTION('',(1.,0.));+#9574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9575 = PCURVE('',#9576,#9581);+#9576 = PLANE('',#9577);+#9577 = AXIS2_PLACEMENT_3D('',#9578,#9579,#9580);+#9578 = CARTESIAN_POINT('',(1.0316288358,-0.169487856467,2.0500001));+#9579 = DIRECTION('',(0.,0.,1.));+#9580 = DIRECTION('',(1.,0.,0.));+#9581 = DEFINITIONAL_REPRESENTATION('',(#9582),#9586);+#9582 = LINE('',#9583,#9584);+#9583 = CARTESIAN_POINT('',(0.165902076711,0.14343119024));+#9584 = VECTOR('',#9585,1.);+#9585 = DIRECTION('',(0.,1.));+#9586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9587 = ORIENTED_EDGE('',*,*,#9588,.F.);+#9588 = EDGE_CURVE('',#8760,#9561,#9589,.T.);+#9589 = SURFACE_CURVE('',#9590,(#9594,#9601),.PCURVE_S1.);+#9590 = LINE('',#9591,#9592);+#9591 = CARTESIAN_POINT('',(1.197530912511,1.362596307278E-02,2.1500001)+ );+#9592 = VECTOR('',#9593,1.);+#9593 = DIRECTION('',(-0.,-0.,-1.));+#9594 = PCURVE('',#9522,#9595);+#9595 = DEFINITIONAL_REPRESENTATION('',(#9596),#9600);+#9596 = LINE('',#9597,#9598);+#9597 = CARTESIAN_POINT('',(3.968262929969E-02,0.));+#9598 = VECTOR('',#9599,1.);+#9599 = DIRECTION('',(0.,-1.));+#9600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9601 = PCURVE('',#8777,#9602);+#9602 = DEFINITIONAL_REPRESENTATION('',(#9603),#9607);+#9603 = LINE('',#9604,#9605);+#9604 = CARTESIAN_POINT('',(0.,0.));+#9605 = VECTOR('',#9606,1.);+#9606 = DIRECTION('',(0.,-1.));+#9607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9608 = ADVANCED_FACE('',(#9609),#9576,.T.);+#9609 = FACE_BOUND('',#9610,.F.);+#9610 = EDGE_LOOP('',(#9611,#9636,#9659,#9682,#9705,#9728,#9751,#9774,+ #9797,#9820,#9843,#9866,#9889,#9912,#9935,#9958,#9981,#10004,#10027,+ #10050,#10071,#10072));+#9611 = ORIENTED_EDGE('',*,*,#9612,.T.);+#9612 = EDGE_CURVE('',#9613,#9615,#9617,.T.);+#9613 = VERTEX_POINT('',#9614);+#9614 = CARTESIAN_POINT('',(1.295542225841,1.362596307278E-02,2.0500001)+ );+#9615 = VERTEX_POINT('',#9616);+#9616 = CARTESIAN_POINT('',(1.295542225841,-0.140084462468,2.0500001));+#9617 = SURFACE_CURVE('',#9618,(#9622,#9629),.PCURVE_S1.);+#9618 = LINE('',#9619,#9620);+#9619 = CARTESIAN_POINT('',(1.295542225841,1.362596307278E-02,2.0500001)+ );+#9620 = VECTOR('',#9621,1.);+#9621 = DIRECTION('',(0.,-1.,0.));+#9622 = PCURVE('',#9576,#9623);+#9623 = DEFINITIONAL_REPRESENTATION('',(#9624),#9628);+#9624 = LINE('',#9625,#9626);+#9625 = CARTESIAN_POINT('',(0.263913390041,0.18311381954));+#9626 = VECTOR('',#9627,1.);+#9627 = DIRECTION('',(0.,-1.));+#9628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9629 = PCURVE('',#8804,#9630);+#9630 = DEFINITIONAL_REPRESENTATION('',(#9631),#9635);+#9631 = LINE('',#9632,#9633);+#9632 = CARTESIAN_POINT('',(0.,-0.1));+#9633 = VECTOR('',#9634,1.);+#9634 = DIRECTION('',(1.,0.));+#9635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9636 = ORIENTED_EDGE('',*,*,#9637,.T.);+#9637 = EDGE_CURVE('',#9615,#9638,#9640,.T.);+#9638 = VERTEX_POINT('',#9639);+#9639 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.0500001));+#9640 = SURFACE_CURVE('',#9641,(#9645,#9652),.PCURVE_S1.);+#9641 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9642,#9643,#9644),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9642 = CARTESIAN_POINT('',(1.295542225841,-0.140084462468,2.0500001));+#9643 = CARTESIAN_POINT('',(1.276179015159,-0.158013361248,2.0500001));+#9644 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.0500001));+#9645 = PCURVE('',#9576,#9646);+#9646 = DEFINITIONAL_REPRESENTATION('',(#9647),#9651);+#9647 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9648,#9649,#9650),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9648 = CARTESIAN_POINT('',(0.263913390041,2.940339399916E-02));+#9649 = CARTESIAN_POINT('',(0.244550179359,1.147449521919E-02));+#9650 = CARTESIAN_POINT('',(0.22028640301,2.270993845464E-03));+#9651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9652 = PCURVE('',#8835,#9653);+#9653 = DEFINITIONAL_REPRESENTATION('',(#9654),#9658);+#9654 = LINE('',#9655,#9656);+#9655 = CARTESIAN_POINT('',(0.,-0.1));+#9656 = VECTOR('',#9657,1.);+#9657 = DIRECTION('',(1.,0.));+#9658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9659 = ORIENTED_EDGE('',*,*,#9660,.T.);+#9660 = EDGE_CURVE('',#9638,#9661,#9663,.T.);+#9661 = VERTEX_POINT('',#9662);+#9662 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.0500001));+#9663 = SURFACE_CURVE('',#9664,(#9668,#9675),.PCURVE_S1.);+#9664 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9665,#9666,#9667),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9665 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.0500001));+#9666 = CARTESIAN_POINT('',(1.227651462461,-0.176420363995,2.0500001));+#9667 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.0500001));+#9668 = PCURVE('',#9576,#9669);+#9669 = DEFINITIONAL_REPRESENTATION('',(#9670),#9674);+#9670 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9671,#9672,#9673),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9671 = CARTESIAN_POINT('',(0.22028640301,2.270993845464E-03));+#9672 = CARTESIAN_POINT('',(0.196022626661,-6.932507528258E-03));+#9673 = CARTESIAN_POINT('',(0.167814492581,-6.932507528258E-03));+#9674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9675 = PCURVE('',#8871,#9676);+#9676 = DEFINITIONAL_REPRESENTATION('',(#9677),#9681);+#9677 = LINE('',#9678,#9679);+#9678 = CARTESIAN_POINT('',(0.,-0.1));+#9679 = VECTOR('',#9680,1.);+#9680 = DIRECTION('',(1.,0.));+#9681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9682 = ORIENTED_EDGE('',*,*,#9683,.T.);+#9683 = EDGE_CURVE('',#9661,#9684,#9686,.T.);+#9684 = VERTEX_POINT('',#9685);+#9685 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.0500001));+#9686 = SURFACE_CURVE('',#9687,(#9691,#9698),.PCURVE_S1.);+#9687 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9688,#9689,#9690),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9688 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.0500001));+#9689 = CARTESIAN_POINT('',(1.131552565,-0.176420363995,2.0500001));+#9690 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.0500001));+#9691 = PCURVE('',#9576,#9692);+#9692 = DEFINITIONAL_REPRESENTATION('',(#9693),#9697);+#9693 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9694,#9695,#9696),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9694 = CARTESIAN_POINT('',(0.167814492581,-6.932507528258E-03));+#9695 = CARTESIAN_POINT('',(9.992372920041E-02,-6.932507528258E-03));+#9696 = CARTESIAN_POINT('',(6.215351577059E-02,4.171457116142E-02));+#9697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9698 = PCURVE('',#8913,#9699);+#9699 = DEFINITIONAL_REPRESENTATION('',(#9700),#9704);+#9700 = LINE('',#9701,#9702);+#9701 = CARTESIAN_POINT('',(0.,-0.1));+#9702 = VECTOR('',#9703,1.);+#9703 = DIRECTION('',(1.,0.));+#9704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9705 = ORIENTED_EDGE('',*,*,#9706,.T.);+#9706 = EDGE_CURVE('',#9684,#9707,#9709,.T.);+#9707 = VERTEX_POINT('',#9708);+#9708 = CARTESIAN_POINT('',(1.056012138141,8.60587141439E-03,2.0500001)+ );+#9709 = SURFACE_CURVE('',#9710,(#9714,#9721),.PCURVE_S1.);+#9710 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9711,#9712,#9713),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9711 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.0500001));+#9712 = CARTESIAN_POINT('',(1.056012138141,-7.912620661564E-02,2.0500001+ ));+#9713 = CARTESIAN_POINT('',(1.056012138141,8.60587141439E-03,2.0500001)+ );+#9714 = PCURVE('',#9576,#9715);+#9715 = DEFINITIONAL_REPRESENTATION('',(#9716),#9720);+#9716 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9717,#9718,#9719),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9717 = CARTESIAN_POINT('',(6.215351577059E-02,4.171457116142E-02));+#9718 = CARTESIAN_POINT('',(2.438330234077E-02,9.036164985109E-02));+#9719 = CARTESIAN_POINT('',(2.438330234077E-02,0.178093727881));+#9720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9721 = PCURVE('',#8952,#9722);+#9722 = DEFINITIONAL_REPRESENTATION('',(#9723),#9727);+#9723 = LINE('',#9724,#9725);+#9724 = CARTESIAN_POINT('',(0.,-0.1));+#9725 = VECTOR('',#9726,1.);+#9726 = DIRECTION('',(1.,0.));+#9727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9728 = ORIENTED_EDGE('',*,*,#9729,.T.);+#9729 = EDGE_CURVE('',#9707,#9730,#9732,.T.);+#9730 = VERTEX_POINT('',#9731);+#9731 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.0500001));+#9732 = SURFACE_CURVE('',#9733,(#9737,#9744),.PCURVE_S1.);+#9733 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9734,#9735,#9736),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9734 = CARTESIAN_POINT('',(1.056012138141,8.60587141439E-03,2.0500001)+ );+#9735 = CARTESIAN_POINT('',(1.056012138141,9.609889746068E-02,2.0500001)+ );+#9736 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.0500001));+#9737 = PCURVE('',#9576,#9738);+#9738 = DEFINITIONAL_REPRESENTATION('',(#9739),#9743);+#9739 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9740,#9741,#9742),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9740 = CARTESIAN_POINT('',(2.438330234077E-02,0.178093727881));+#9741 = CARTESIAN_POINT('',(2.438330234077E-02,0.265586753927));+#9742 = CARTESIAN_POINT('',(6.263161973806E-02,0.314472884601));+#9743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9744 = PCURVE('',#8988,#9745);+#9745 = DEFINITIONAL_REPRESENTATION('',(#9746),#9750);+#9746 = LINE('',#9747,#9748);+#9747 = CARTESIAN_POINT('',(0.,-0.1));+#9748 = VECTOR('',#9749,1.);+#9749 = DIRECTION('',(1.,0.));+#9750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9751 = ORIENTED_EDGE('',*,*,#9752,.T.);+#9752 = EDGE_CURVE('',#9730,#9753,#9755,.T.);+#9753 = VERTEX_POINT('',#9754);+#9754 = CARTESIAN_POINT('',(1.200638588299,0.193871158808,2.0500001));+#9755 = SURFACE_CURVE('',#9756,(#9760,#9767),.PCURVE_S1.);+#9756 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9757,#9758,#9759),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9757 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.0500001));+#9758 = CARTESIAN_POINT('',(1.132508772935,0.193871158808,2.0500001));+#9759 = CARTESIAN_POINT('',(1.200638588299,0.193871158808,2.0500001));+#9760 = PCURVE('',#9576,#9761);+#9761 = DEFINITIONAL_REPRESENTATION('',(#9762),#9766);+#9762 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9763,#9764,#9765),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9763 = CARTESIAN_POINT('',(6.263161973806E-02,0.314472884601));+#9764 = CARTESIAN_POINT('',(0.100879937135,0.363359015274));+#9765 = CARTESIAN_POINT('',(0.169009752499,0.363359015274));+#9766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9767 = PCURVE('',#9030,#9768);+#9768 = DEFINITIONAL_REPRESENTATION('',(#9769),#9773);+#9769 = LINE('',#9770,#9771);+#9770 = CARTESIAN_POINT('',(0.,-0.1));+#9771 = VECTOR('',#9772,1.);+#9772 = DIRECTION('',(1.,0.));+#9773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9774 = ORIENTED_EDGE('',*,*,#9775,.T.);+#9775 = EDGE_CURVE('',#9753,#9776,#9778,.T.);+#9776 = VERTEX_POINT('',#9777);+#9777 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.0500001));+#9778 = SURFACE_CURVE('',#9779,(#9783,#9790),.PCURVE_S1.);+#9779 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9780,#9781,#9782),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9780 = CARTESIAN_POINT('',(1.200638588299,0.193871158808,2.0500001));+#9781 = CARTESIAN_POINT('',(1.22310947477,0.193871158808,2.0500001));+#9782 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.0500001));+#9783 = PCURVE('',#9576,#9784);+#9784 = DEFINITIONAL_REPRESENTATION('',(#9785),#9789);+#9785 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9786,#9787,#9788),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9786 = CARTESIAN_POINT('',(0.169009752499,0.363359015274));+#9787 = CARTESIAN_POINT('',(0.19148063897,0.363359015274));+#9788 = CARTESIAN_POINT('',(0.212039109571,0.357024137705));+#9789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9790 = PCURVE('',#9069,#9791);+#9791 = DEFINITIONAL_REPRESENTATION('',(#9792),#9796);+#9792 = LINE('',#9793,#9794);+#9793 = CARTESIAN_POINT('',(0.,-0.1));+#9794 = VECTOR('',#9795,1.);+#9795 = DIRECTION('',(1.,0.));+#9796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9797 = ORIENTED_EDGE('',*,*,#9798,.T.);+#9798 = EDGE_CURVE('',#9776,#9799,#9801,.T.);+#9799 = VERTEX_POINT('',#9800);+#9800 = CARTESIAN_POINT('',(1.283350574671,0.168292596548,2.0500001));+#9801 = SURFACE_CURVE('',#9802,(#9806,#9813),.PCURVE_S1.);+#9802 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9803,#9804,#9805),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9803 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.0500001));+#9804 = CARTESIAN_POINT('',(1.264226415972,0.18120140367,2.0500001));+#9805 = CARTESIAN_POINT('',(1.283350574671,0.168292596548,2.0500001));+#9806 = PCURVE('',#9576,#9807);+#9807 = DEFINITIONAL_REPRESENTATION('',(#9808),#9812);+#9808 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9809,#9810,#9811),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9809 = CARTESIAN_POINT('',(0.212039109571,0.357024137705));+#9810 = CARTESIAN_POINT('',(0.232597580172,0.350689260136));+#9811 = CARTESIAN_POINT('',(0.251721738871,0.337780453015));+#9812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9813 = PCURVE('',#9105,#9814);+#9814 = DEFINITIONAL_REPRESENTATION('',(#9815),#9819);+#9815 = LINE('',#9816,#9817);+#9816 = CARTESIAN_POINT('',(0.,-0.1));+#9817 = VECTOR('',#9818,1.);+#9818 = DIRECTION('',(1.,0.));+#9819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9820 = ORIENTED_EDGE('',*,*,#9821,.T.);+#9821 = EDGE_CURVE('',#9799,#9822,#9824,.T.);+#9822 = VERTEX_POINT('',#9823);+#9823 = CARTESIAN_POINT('',(1.283350574671,0.118808835915,2.0500001));+#9824 = SURFACE_CURVE('',#9825,(#9829,#9836),.PCURVE_S1.);+#9825 = LINE('',#9826,#9827);+#9826 = CARTESIAN_POINT('',(1.283350574671,0.168292596548,2.0500001));+#9827 = VECTOR('',#9828,1.);+#9828 = DIRECTION('',(0.,-1.,0.));+#9829 = PCURVE('',#9576,#9830);+#9830 = DEFINITIONAL_REPRESENTATION('',(#9831),#9835);+#9831 = LINE('',#9832,#9833);+#9832 = CARTESIAN_POINT('',(0.251721738871,0.337780453015));+#9833 = VECTOR('',#9834,1.);+#9834 = DIRECTION('',(0.,-1.));+#9835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9836 = PCURVE('',#9137,#9837);+#9837 = DEFINITIONAL_REPRESENTATION('',(#9838),#9842);+#9838 = LINE('',#9839,#9840);+#9839 = CARTESIAN_POINT('',(0.,-0.1));+#9840 = VECTOR('',#9841,1.);+#9841 = DIRECTION('',(1.,0.));+#9842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9843 = ORIENTED_EDGE('',*,*,#9844,.T.);+#9844 = EDGE_CURVE('',#9822,#9845,#9847,.T.);+#9845 = VERTEX_POINT('',#9846);+#9846 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.0500001));+#9847 = SURFACE_CURVE('',#9848,(#9852,#9859),.PCURVE_S1.);+#9848 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9849,#9850,#9851),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9849 = CARTESIAN_POINT('',(1.283350574671,0.118808835915,2.0500001));+#9850 = CARTESIAN_POINT('',(1.263987363988,0.137215838663,2.0500001));+#9851 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.0500001));+#9852 = PCURVE('',#9576,#9853);+#9853 = DEFINITIONAL_REPRESENTATION('',(#9854),#9858);+#9854 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9855,#9856,#9857),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9855 = CARTESIAN_POINT('',(0.251721738871,0.288296692382));+#9856 = CARTESIAN_POINT('',(0.232358528189,0.306703695129));+#9857 = CARTESIAN_POINT('',(0.212039109571,0.315429092536));+#9858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9859 = PCURVE('',#9168,#9860);+#9860 = DEFINITIONAL_REPRESENTATION('',(#9861),#9865);+#9861 = LINE('',#9862,#9863);+#9862 = CARTESIAN_POINT('',(0.,-0.1));+#9863 = VECTOR('',#9864,1.);+#9864 = DIRECTION('',(1.,0.));+#9865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9866 = ORIENTED_EDGE('',*,*,#9867,.T.);+#9867 = EDGE_CURVE('',#9845,#9868,#9870,.T.);+#9868 = VERTEX_POINT('',#9869);+#9869 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.0500001));+#9870 = SURFACE_CURVE('',#9871,(#9875,#9882),.PCURVE_S1.);+#9871 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9872,#9873,#9874),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9872 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.0500001));+#9873 = CARTESIAN_POINT('',(1.223348526754,0.154666633475,2.0500001));+#9874 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.0500001));+#9875 = PCURVE('',#9576,#9876);+#9876 = DEFINITIONAL_REPRESENTATION('',(#9877),#9881);+#9877 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9878,#9879,#9880),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9878 = CARTESIAN_POINT('',(0.212039109571,0.315429092536));+#9879 = CARTESIAN_POINT('',(0.191719690954,0.324154489942));+#9880 = CARTESIAN_POINT('',(0.169009752499,0.324154489942));+#9881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9882 = PCURVE('',#9204,#9883);+#9883 = DEFINITIONAL_REPRESENTATION('',(#9884),#9888);+#9884 = LINE('',#9885,#9886);+#9885 = CARTESIAN_POINT('',(0.,-0.1));+#9886 = VECTOR('',#9887,1.);+#9887 = DIRECTION('',(1.,0.));+#9888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9889 = ORIENTED_EDGE('',*,*,#9890,.T.);+#9890 = EDGE_CURVE('',#9868,#9891,#9893,.T.);+#9891 = VERTEX_POINT('',#9892);+#9892 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.0500001));+#9893 = SURFACE_CURVE('',#9894,(#9898,#9905),.PCURVE_S1.);+#9894 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9895,#9896,#9897),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9895 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.0500001));+#9896 = CARTESIAN_POINT('',(1.153545347504,0.154666633475,2.0500001));+#9897 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.0500001));+#9898 = PCURVE('',#9576,#9899);+#9899 = DEFINITIONAL_REPRESENTATION('',(#9900),#9904);+#9900 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9901,#9902,#9903),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9901 = CARTESIAN_POINT('',(0.169009752499,0.324154489942));+#9902 = CARTESIAN_POINT('',(0.121916511704,0.324154489942));+#9903 = CARTESIAN_POINT('',(9.836989130615E-02,0.287699062423));+#9904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9905 = PCURVE('',#9246,#9906);+#9906 = DEFINITIONAL_REPRESENTATION('',(#9907),#9911);+#9907 = LINE('',#9908,#9909);+#9908 = CARTESIAN_POINT('',(0.,-0.1));+#9909 = VECTOR('',#9910,1.);+#9910 = DIRECTION('',(1.,0.));+#9911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9912 = ORIENTED_EDGE('',*,*,#9913,.T.);+#9913 = EDGE_CURVE('',#9891,#9914,#9916,.T.);+#9914 = VERTEX_POINT('',#9915);+#9915 = CARTESIAN_POINT('',(1.106452106708,8.60587141439E-03,2.0500001)+ );+#9916 = SURFACE_CURVE('',#9917,(#9921,#9928),.PCURVE_S1.);+#9917 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9918,#9919,#9920),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9918 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.0500001));+#9919 = CARTESIAN_POINT('',(1.106452106708,8.17557784367E-02,2.0500001)+ );+#9920 = CARTESIAN_POINT('',(1.106452106708,8.60587141439E-03,2.0500001)+ );+#9921 = PCURVE('',#9576,#9922);+#9922 = DEFINITIONAL_REPRESENTATION('',(#9923),#9927);+#9923 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9924,#9925,#9926),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9924 = CARTESIAN_POINT('',(9.836989130615E-02,0.287699062423));+#9925 = CARTESIAN_POINT('',(7.482327090844E-02,0.251243634903));+#9926 = CARTESIAN_POINT('',(7.482327090844E-02,0.178093727881));+#9927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9928 = PCURVE('',#9285,#9929);+#9929 = DEFINITIONAL_REPRESENTATION('',(#9930),#9934);+#9930 = LINE('',#9931,#9932);+#9931 = CARTESIAN_POINT('',(0.,-0.1));+#9932 = VECTOR('',#9933,1.);+#9933 = DIRECTION('',(1.,0.));+#9934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9935 = ORIENTED_EDGE('',*,*,#9936,.T.);+#9936 = EDGE_CURVE('',#9914,#9937,#9939,.T.);+#9937 = VERTEX_POINT('',#9938);+#9938 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.0500001));+#9939 = SURFACE_CURVE('',#9940,(#9944,#9951),.PCURVE_S1.);+#9940 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9941,#9942,#9943),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9941 = CARTESIAN_POINT('',(1.106452106708,8.60587141439E-03,2.0500001)+ );+#9942 = CARTESIAN_POINT('',(1.106452106708,-6.573929552659E-02,2.0500001+ ));+#9943 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.0500001));+#9944 = PCURVE('',#9576,#9945);+#9945 = DEFINITIONAL_REPRESENTATION('',(#9946),#9950);+#9946 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9947,#9948,#9949),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9947 = CARTESIAN_POINT('',(7.482327090844E-02,0.178093727881));+#9948 = CARTESIAN_POINT('',(7.482327090844E-02,0.10374856094));+#9949 = CARTESIAN_POINT('',(9.765273535495E-02,6.801028937205E-02));+#9950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9951 = PCURVE('',#9321,#9952);+#9952 = DEFINITIONAL_REPRESENTATION('',(#9953),#9957);+#9953 = LINE('',#9954,#9955);+#9954 = CARTESIAN_POINT('',(0.,-0.1));+#9955 = VECTOR('',#9956,1.);+#9956 = DIRECTION('',(1.,0.));+#9957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9958 = ORIENTED_EDGE('',*,*,#9959,.T.);+#9959 = EDGE_CURVE('',#9937,#9960,#9962,.T.);+#9960 = VERTEX_POINT('',#9961);+#9961 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.0500001));+#9962 = SURFACE_CURVE('',#9963,(#9967,#9974),.PCURVE_S1.);+#9963 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9964,#9965,#9966),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9964 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.0500001));+#9965 = CARTESIAN_POINT('',(1.152111035601,-0.137215838663,2.0500001));+#9966 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.0500001));+#9967 = PCURVE('',#9576,#9968);+#9968 = DEFINITIONAL_REPRESENTATION('',(#9969),#9973);+#9969 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9970,#9971,#9972),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9970 = CARTESIAN_POINT('',(9.765273535495E-02,6.801028937205E-02));+#9971 = CARTESIAN_POINT('',(0.120482199801,3.227201780396E-02));+#9972 = CARTESIAN_POINT('',(0.167814492581,3.227201780396E-02));+#9973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9974 = PCURVE('',#9363,#9975);+#9975 = DEFINITIONAL_REPRESENTATION('',(#9976),#9980);+#9976 = LINE('',#9977,#9978);+#9977 = CARTESIAN_POINT('',(0.,-0.1));+#9978 = VECTOR('',#9979,1.);+#9979 = DIRECTION('',(1.,0.));+#9980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9981 = ORIENTED_EDGE('',*,*,#9982,.T.);+#9982 = EDGE_CURVE('',#9960,#9983,#9985,.T.);+#9983 = VERTEX_POINT('',#9984);+#9984 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.0500001));+#9985 = SURFACE_CURVE('',#9986,(#9990,#9997),.PCURVE_S1.);+#9986 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9987,#9988,#9989),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9987 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.0500001));+#9988 = CARTESIAN_POINT('',(1.215459811291,-0.137215838663,2.0500001));+#9989 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.0500001));+#9990 = PCURVE('',#9576,#9991);+#9991 = DEFINITIONAL_REPRESENTATION('',(#9992),#9996);+#9992 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9993,#9994,#9995),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9993 = CARTESIAN_POINT('',(0.167814492581,3.227201780396E-02));+#9994 = CARTESIAN_POINT('',(0.183830975491,3.227201780396E-02));+#9995 = CARTESIAN_POINT('',(0.195903100669,3.597732355182E-02));+#9996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9997 = PCURVE('',#9402,#9998);+#9998 = DEFINITIONAL_REPRESENTATION('',(#9999),#10003);+#9999 = LINE('',#10000,#10001);+#10000 = CARTESIAN_POINT('',(0.,-0.1));+#10001 = VECTOR('',#10002,1.);+#10002 = DIRECTION('',(1.,0.));+#10003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10004 = ORIENTED_EDGE('',*,*,#10005,.T.);+#10005 = EDGE_CURVE('',#9983,#10006,#10008,.T.);+#10006 = VERTEX_POINT('',#10007);+#10007 = CARTESIAN_POINT('',(1.249405192981,-0.121916511704,2.0500001));+#10008 = SURFACE_CURVE('',#10009,(#10013,#10020),.PCURVE_S1.);+#10009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10010,#10011,#10012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10010 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.0500001));+#10011 = CARTESIAN_POINT('',(1.239604061648,-0.129805227167,2.0500001));+#10012 = CARTESIAN_POINT('',(1.249405192981,-0.121916511704,2.0500001));+#10013 = PCURVE('',#9576,#10014);+#10014 = DEFINITIONAL_REPRESENTATION('',(#10015),#10019);+#10015 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10016,#10017,#10018),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10016 = CARTESIAN_POINT('',(0.195903100669,3.597732355182E-02));+#10017 = CARTESIAN_POINT('',(0.207975225848,3.968262929969E-02));+#10018 = CARTESIAN_POINT('',(0.217776357181,4.757134476288E-02));+#10019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10020 = PCURVE('',#9438,#10021);+#10021 = DEFINITIONAL_REPRESENTATION('',(#10022),#10026);+#10022 = LINE('',#10023,#10024);+#10023 = CARTESIAN_POINT('',(0.,-0.1));+#10024 = VECTOR('',#10025,1.);+#10025 = DIRECTION('',(1.,0.));+#10026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10027 = ORIENTED_EDGE('',*,*,#10028,.T.);+#10028 = EDGE_CURVE('',#10006,#10029,#10031,.T.);+#10029 = VERTEX_POINT('',#10030);+#10030 = CARTESIAN_POINT('',(1.249405192981,-2.60566662269E-02,2.0500001+ ));+#10031 = SURFACE_CURVE('',#10032,(#10036,#10043),.PCURVE_S1.);+#10032 = LINE('',#10033,#10034);+#10033 = CARTESIAN_POINT('',(1.249405192981,-0.121916511704,2.0500001));+#10034 = VECTOR('',#10035,1.);+#10035 = DIRECTION('',(0.,1.,0.));+#10036 = PCURVE('',#9576,#10037);+#10037 = DEFINITIONAL_REPRESENTATION('',(#10038),#10042);+#10038 = LINE('',#10039,#10040);+#10039 = CARTESIAN_POINT('',(0.217776357181,4.757134476288E-02));+#10040 = VECTOR('',#10041,1.);+#10041 = DIRECTION('',(0.,1.));+#10042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10043 = PCURVE('',#9470,#10044);+#10044 = DEFINITIONAL_REPRESENTATION('',(#10045),#10049);+#10045 = LINE('',#10046,#10047);+#10046 = CARTESIAN_POINT('',(0.,-0.1));+#10047 = VECTOR('',#10048,1.);+#10048 = DIRECTION('',(1.,0.));+#10049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10050 = ORIENTED_EDGE('',*,*,#10051,.T.);+#10051 = EDGE_CURVE('',#10029,#9538,#10052,.T.);+#10052 = SURFACE_CURVE('',#10053,(#10057,#10064),.PCURVE_S1.);+#10053 = LINE('',#10054,#10055);+#10054 = CARTESIAN_POINT('',(1.249405192981,-2.60566662269E-02,2.0500001+ ));+#10055 = VECTOR('',#10056,1.);+#10056 = DIRECTION('',(-1.,0.,0.));+#10057 = PCURVE('',#9576,#10058);+#10058 = DEFINITIONAL_REPRESENTATION('',(#10059),#10063);+#10059 = LINE('',#10060,#10061);+#10060 = CARTESIAN_POINT('',(0.217776357181,0.14343119024));+#10061 = VECTOR('',#10062,1.);+#10062 = DIRECTION('',(-1.,0.));+#10063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10064 = PCURVE('',#9497,#10065);+#10065 = DEFINITIONAL_REPRESENTATION('',(#10066),#10070);+#10066 = LINE('',#10067,#10068);+#10067 = CARTESIAN_POINT('',(0.,-0.1));+#10068 = VECTOR('',#10069,1.);+#10069 = DIRECTION('',(1.,0.));+#10070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10071 = ORIENTED_EDGE('',*,*,#9560,.T.);+#10072 = ORIENTED_EDGE('',*,*,#10073,.T.);+#10073 = EDGE_CURVE('',#9561,#9613,#10074,.T.);+#10074 = SURFACE_CURVE('',#10075,(#10079,#10086),.PCURVE_S1.);+#10075 = LINE('',#10076,#10077);+#10076 = CARTESIAN_POINT('',(1.197530912511,1.362596307278E-02,2.0500001+ ));+#10077 = VECTOR('',#10078,1.);+#10078 = DIRECTION('',(1.,0.,0.));+#10079 = PCURVE('',#9576,#10080);+#10080 = DEFINITIONAL_REPRESENTATION('',(#10081),#10085);+#10081 = LINE('',#10082,#10083);+#10082 = CARTESIAN_POINT('',(0.165902076711,0.18311381954));+#10083 = VECTOR('',#10084,1.);+#10084 = DIRECTION('',(1.,0.));+#10085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10086 = PCURVE('',#8777,#10087);+#10087 = DEFINITIONAL_REPRESENTATION('',(#10088),#10092);+#10088 = LINE('',#10089,#10090);+#10089 = CARTESIAN_POINT('',(0.,-0.1));+#10090 = VECTOR('',#10091,1.);+#10091 = DIRECTION('',(1.,0.));+#10092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10093 = ADVANCED_FACE('',(#10094),#9497,.T.);+#10094 = FACE_BOUND('',#10095,.T.);+#10095 = EDGE_LOOP('',(#10096,#10097,#10118,#10119));+#10096 = ORIENTED_EDGE('',*,*,#9481,.F.);+#10097 = ORIENTED_EDGE('',*,*,#10098,.T.);+#10098 = EDGE_CURVE('',#9455,#10029,#10099,.T.);+#10099 = SURFACE_CURVE('',#10100,(#10104,#10111),.PCURVE_S1.);+#10100 = LINE('',#10101,#10102);+#10101 = CARTESIAN_POINT('',(1.249405192981,-2.60566662269E-02,2.1500001+ ));+#10102 = VECTOR('',#10103,1.);+#10103 = DIRECTION('',(-0.,-0.,-1.));+#10104 = PCURVE('',#9497,#10105);+#10105 = DEFINITIONAL_REPRESENTATION('',(#10106),#10110);+#10106 = LINE('',#10107,#10108);+#10107 = CARTESIAN_POINT('',(0.,0.));+#10108 = VECTOR('',#10109,1.);+#10109 = DIRECTION('',(0.,-1.));+#10110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10111 = PCURVE('',#9470,#10112);+#10112 = DEFINITIONAL_REPRESENTATION('',(#10113),#10117);+#10113 = LINE('',#10114,#10115);+#10114 = CARTESIAN_POINT('',(9.585984547695E-02,0.));+#10115 = VECTOR('',#10116,1.);+#10116 = DIRECTION('',(0.,-1.));+#10117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10118 = ORIENTED_EDGE('',*,*,#10051,.T.);+#10119 = ORIENTED_EDGE('',*,*,#9537,.F.);+#10120 = ADVANCED_FACE('',(#10121),#9470,.T.);+#10121 = FACE_BOUND('',#10122,.T.);+#10122 = EDGE_LOOP('',(#10123,#10124,#10145,#10146));+#10123 = ORIENTED_EDGE('',*,*,#9454,.F.);+#10124 = ORIENTED_EDGE('',*,*,#10125,.T.);+#10125 = EDGE_CURVE('',#9419,#10006,#10126,.T.);+#10126 = SURFACE_CURVE('',#10127,(#10131,#10138),.PCURVE_S1.);+#10127 = LINE('',#10128,#10129);+#10128 = CARTESIAN_POINT('',(1.249405192981,-0.121916511704,2.1500001));+#10129 = VECTOR('',#10130,1.);+#10130 = DIRECTION('',(-0.,-0.,-1.));+#10131 = PCURVE('',#9470,#10132);+#10132 = DEFINITIONAL_REPRESENTATION('',(#10133),#10137);+#10133 = LINE('',#10134,#10135);+#10134 = CARTESIAN_POINT('',(0.,0.));+#10135 = VECTOR('',#10136,1.);+#10136 = DIRECTION('',(0.,-1.));+#10137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10138 = PCURVE('',#9438,#10139);+#10139 = DEFINITIONAL_REPRESENTATION('',(#10140),#10144);+#10140 = LINE('',#10141,#10142);+#10141 = CARTESIAN_POINT('',(1.,0.));+#10142 = VECTOR('',#10143,1.);+#10143 = DIRECTION('',(0.,-1.));+#10144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10145 = ORIENTED_EDGE('',*,*,#10028,.T.);+#10146 = ORIENTED_EDGE('',*,*,#10098,.F.);+#10147 = ADVANCED_FACE('',(#10148),#9438,.T.);+#10148 = FACE_BOUND('',#10149,.T.);+#10149 = EDGE_LOOP('',(#10150,#10151,#10172,#10173));+#10150 = ORIENTED_EDGE('',*,*,#9418,.T.);+#10151 = ORIENTED_EDGE('',*,*,#10152,.T.);+#10152 = EDGE_CURVE('',#9383,#9983,#10153,.T.);+#10153 = SURFACE_CURVE('',#10154,(#10158,#10165),.PCURVE_S1.);+#10154 = LINE('',#10155,#10156);+#10155 = CARTESIAN_POINT('',(1.227531936469,-0.133510532915,2.1500001));+#10156 = VECTOR('',#10157,1.);+#10157 = DIRECTION('',(-0.,-0.,-1.));+#10158 = PCURVE('',#9438,#10159);+#10159 = DEFINITIONAL_REPRESENTATION('',(#10160),#10164);+#10160 = LINE('',#10161,#10162);+#10161 = CARTESIAN_POINT('',(0.,0.));+#10162 = VECTOR('',#10163,1.);+#10163 = DIRECTION('',(0.,-1.));+#10164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10165 = PCURVE('',#9402,#10166);+#10166 = DEFINITIONAL_REPRESENTATION('',(#10167),#10171);+#10167 = LINE('',#10168,#10169);+#10168 = CARTESIAN_POINT('',(1.,0.));+#10169 = VECTOR('',#10170,1.);+#10170 = DIRECTION('',(0.,-1.));+#10171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10172 = ORIENTED_EDGE('',*,*,#10005,.T.);+#10173 = ORIENTED_EDGE('',*,*,#10125,.F.);+#10174 = ADVANCED_FACE('',(#10175),#9402,.T.);+#10175 = FACE_BOUND('',#10176,.T.);+#10176 = EDGE_LOOP('',(#10177,#10178,#10199,#10200));+#10177 = ORIENTED_EDGE('',*,*,#9382,.T.);+#10178 = ORIENTED_EDGE('',*,*,#10179,.T.);+#10179 = EDGE_CURVE('',#9338,#9960,#10180,.T.);+#10180 = SURFACE_CURVE('',#10181,(#10185,#10192),.PCURVE_S1.);+#10181 = LINE('',#10182,#10183);+#10182 = CARTESIAN_POINT('',(1.199443328381,-0.137215838663,2.1500001));+#10183 = VECTOR('',#10184,1.);+#10184 = DIRECTION('',(-0.,-0.,-1.));+#10185 = PCURVE('',#9402,#10186);+#10186 = DEFINITIONAL_REPRESENTATION('',(#10187),#10191);+#10187 = LINE('',#10188,#10189);+#10188 = CARTESIAN_POINT('',(0.,0.));+#10189 = VECTOR('',#10190,1.);+#10190 = DIRECTION('',(0.,-1.));+#10191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10192 = PCURVE('',#9363,#10193);+#10193 = DEFINITIONAL_REPRESENTATION('',(#10194),#10198);+#10194 = LINE('',#10195,#10196);+#10195 = CARTESIAN_POINT('',(1.,0.));+#10196 = VECTOR('',#10197,1.);+#10197 = DIRECTION('',(0.,-1.));+#10198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10199 = ORIENTED_EDGE('',*,*,#9982,.T.);+#10200 = ORIENTED_EDGE('',*,*,#10152,.F.);+#10201 = ADVANCED_FACE('',(#10202),#9363,.T.);+#10202 = FACE_BOUND('',#10203,.T.);+#10203 = EDGE_LOOP('',(#10204,#10205,#10226,#10227));+#10204 = ORIENTED_EDGE('',*,*,#9337,.T.);+#10205 = ORIENTED_EDGE('',*,*,#10206,.T.);+#10206 = EDGE_CURVE('',#9302,#9937,#10207,.T.);+#10207 = SURFACE_CURVE('',#10208,(#10212,#10219),.PCURVE_S1.);+#10208 = LINE('',#10209,#10210);+#10209 = CARTESIAN_POINT('',(1.129281571155,-0.101477567095,2.1500001));+#10210 = VECTOR('',#10211,1.);+#10211 = DIRECTION('',(-0.,-0.,-1.));+#10212 = PCURVE('',#9363,#10213);+#10213 = DEFINITIONAL_REPRESENTATION('',(#10214),#10218);+#10214 = LINE('',#10215,#10216);+#10215 = CARTESIAN_POINT('',(0.,0.));+#10216 = VECTOR('',#10217,1.);+#10217 = DIRECTION('',(0.,-1.));+#10218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10219 = PCURVE('',#9321,#10220);+#10220 = DEFINITIONAL_REPRESENTATION('',(#10221),#10225);+#10221 = LINE('',#10222,#10223);+#10222 = CARTESIAN_POINT('',(1.,0.));+#10223 = VECTOR('',#10224,1.);+#10224 = DIRECTION('',(0.,-1.));+#10225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10226 = ORIENTED_EDGE('',*,*,#9959,.T.);+#10227 = ORIENTED_EDGE('',*,*,#10179,.F.);+#10228 = ADVANCED_FACE('',(#10229),#9321,.T.);+#10229 = FACE_BOUND('',#10230,.T.);+#10230 = EDGE_LOOP('',(#10231,#10232,#10253,#10254));+#10231 = ORIENTED_EDGE('',*,*,#9301,.T.);+#10232 = ORIENTED_EDGE('',*,*,#10233,.T.);+#10233 = EDGE_CURVE('',#9266,#9914,#10234,.T.);+#10234 = SURFACE_CURVE('',#10235,(#10239,#10246),.PCURVE_S1.);+#10235 = LINE('',#10236,#10237);+#10236 = CARTESIAN_POINT('',(1.106452106708,8.60587141439E-03,2.1500001)+ );+#10237 = VECTOR('',#10238,1.);+#10238 = DIRECTION('',(-0.,-0.,-1.));+#10239 = PCURVE('',#9321,#10240);+#10240 = DEFINITIONAL_REPRESENTATION('',(#10241),#10245);+#10241 = LINE('',#10242,#10243);+#10242 = CARTESIAN_POINT('',(0.,0.));+#10243 = VECTOR('',#10244,1.);+#10244 = DIRECTION('',(0.,-1.));+#10245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10246 = PCURVE('',#9285,#10247);+#10247 = DEFINITIONAL_REPRESENTATION('',(#10248),#10252);+#10248 = LINE('',#10249,#10250);+#10249 = CARTESIAN_POINT('',(1.,0.));+#10250 = VECTOR('',#10251,1.);+#10251 = DIRECTION('',(0.,-1.));+#10252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10253 = ORIENTED_EDGE('',*,*,#9936,.T.);+#10254 = ORIENTED_EDGE('',*,*,#10206,.F.);+#10255 = ADVANCED_FACE('',(#10256),#9285,.T.);+#10256 = FACE_BOUND('',#10257,.T.);+#10257 = EDGE_LOOP('',(#10258,#10259,#10280,#10281));+#10258 = ORIENTED_EDGE('',*,*,#9265,.T.);+#10259 = ORIENTED_EDGE('',*,*,#10260,.T.);+#10260 = EDGE_CURVE('',#9221,#9891,#10261,.T.);+#10261 = SURFACE_CURVE('',#10262,(#10266,#10273),.PCURVE_S1.);+#10262 = LINE('',#10263,#10264);+#10263 = CARTESIAN_POINT('',(1.129998727106,0.118211205956,2.1500001));+#10264 = VECTOR('',#10265,1.);+#10265 = DIRECTION('',(-0.,-0.,-1.));+#10266 = PCURVE('',#9285,#10267);+#10267 = DEFINITIONAL_REPRESENTATION('',(#10268),#10272);+#10268 = LINE('',#10269,#10270);+#10269 = CARTESIAN_POINT('',(0.,0.));+#10270 = VECTOR('',#10271,1.);+#10271 = DIRECTION('',(0.,-1.));+#10272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10273 = PCURVE('',#9246,#10274);+#10274 = DEFINITIONAL_REPRESENTATION('',(#10275),#10279);+#10275 = LINE('',#10276,#10277);+#10276 = CARTESIAN_POINT('',(1.,0.));+#10277 = VECTOR('',#10278,1.);+#10278 = DIRECTION('',(0.,-1.));+#10279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10280 = ORIENTED_EDGE('',*,*,#9913,.T.);+#10281 = ORIENTED_EDGE('',*,*,#10233,.F.);+#10282 = ADVANCED_FACE('',(#10283),#9246,.T.);+#10283 = FACE_BOUND('',#10284,.T.);+#10284 = EDGE_LOOP('',(#10285,#10286,#10307,#10308));+#10285 = ORIENTED_EDGE('',*,*,#9220,.T.);+#10286 = ORIENTED_EDGE('',*,*,#10287,.T.);+#10287 = EDGE_CURVE('',#9185,#9868,#10288,.T.);+#10288 = SURFACE_CURVE('',#10289,(#10293,#10300),.PCURVE_S1.);+#10289 = LINE('',#10290,#10291);+#10290 = CARTESIAN_POINT('',(1.200638588299,0.154666633475,2.1500001));+#10291 = VECTOR('',#10292,1.);+#10292 = DIRECTION('',(-0.,-0.,-1.));+#10293 = PCURVE('',#9246,#10294);+#10294 = DEFINITIONAL_REPRESENTATION('',(#10295),#10299);+#10295 = LINE('',#10296,#10297);+#10296 = CARTESIAN_POINT('',(0.,0.));+#10297 = VECTOR('',#10298,1.);+#10298 = DIRECTION('',(0.,-1.));+#10299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10300 = PCURVE('',#9204,#10301);+#10301 = DEFINITIONAL_REPRESENTATION('',(#10302),#10306);+#10302 = LINE('',#10303,#10304);+#10303 = CARTESIAN_POINT('',(1.,0.));+#10304 = VECTOR('',#10305,1.);+#10305 = DIRECTION('',(0.,-1.));+#10306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10307 = ORIENTED_EDGE('',*,*,#9890,.T.);+#10308 = ORIENTED_EDGE('',*,*,#10260,.F.);+#10309 = ADVANCED_FACE('',(#10310),#9204,.T.);+#10310 = FACE_BOUND('',#10311,.T.);+#10311 = EDGE_LOOP('',(#10312,#10313,#10334,#10335));+#10312 = ORIENTED_EDGE('',*,*,#9184,.T.);+#10313 = ORIENTED_EDGE('',*,*,#10314,.T.);+#10314 = EDGE_CURVE('',#9149,#9845,#10315,.T.);+#10315 = SURFACE_CURVE('',#10316,(#10320,#10327),.PCURVE_S1.);+#10316 = LINE('',#10317,#10318);+#10317 = CARTESIAN_POINT('',(1.243667945371,0.145941236069,2.1500001));+#10318 = VECTOR('',#10319,1.);+#10319 = DIRECTION('',(-0.,-0.,-1.));+#10320 = PCURVE('',#9204,#10321);+#10321 = DEFINITIONAL_REPRESENTATION('',(#10322),#10326);+#10322 = LINE('',#10323,#10324);+#10323 = CARTESIAN_POINT('',(0.,0.));+#10324 = VECTOR('',#10325,1.);+#10325 = DIRECTION('',(0.,-1.));+#10326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10327 = PCURVE('',#9168,#10328);+#10328 = DEFINITIONAL_REPRESENTATION('',(#10329),#10333);+#10329 = LINE('',#10330,#10331);+#10330 = CARTESIAN_POINT('',(1.,0.));+#10331 = VECTOR('',#10332,1.);+#10332 = DIRECTION('',(0.,-1.));+#10333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10334 = ORIENTED_EDGE('',*,*,#9867,.T.);+#10335 = ORIENTED_EDGE('',*,*,#10287,.F.);+#10336 = ADVANCED_FACE('',(#10337),#9168,.T.);+#10337 = FACE_BOUND('',#10338,.T.);+#10338 = EDGE_LOOP('',(#10339,#10340,#10361,#10362));+#10339 = ORIENTED_EDGE('',*,*,#9148,.T.);+#10340 = ORIENTED_EDGE('',*,*,#10341,.T.);+#10341 = EDGE_CURVE('',#9122,#9822,#10342,.T.);+#10342 = SURFACE_CURVE('',#10343,(#10347,#10354),.PCURVE_S1.);+#10343 = LINE('',#10344,#10345);+#10344 = CARTESIAN_POINT('',(1.283350574671,0.118808835915,2.1500001));+#10345 = VECTOR('',#10346,1.);+#10346 = DIRECTION('',(-0.,-0.,-1.));+#10347 = PCURVE('',#9168,#10348);+#10348 = DEFINITIONAL_REPRESENTATION('',(#10349),#10353);+#10349 = LINE('',#10350,#10351);+#10350 = CARTESIAN_POINT('',(0.,0.));+#10351 = VECTOR('',#10352,1.);+#10352 = DIRECTION('',(0.,-1.));+#10353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10354 = PCURVE('',#9137,#10355);+#10355 = DEFINITIONAL_REPRESENTATION('',(#10356),#10360);+#10356 = LINE('',#10357,#10358);+#10357 = CARTESIAN_POINT('',(4.948376063274E-02,0.));+#10358 = VECTOR('',#10359,1.);+#10359 = DIRECTION('',(0.,-1.));+#10360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10361 = ORIENTED_EDGE('',*,*,#9844,.T.);+#10362 = ORIENTED_EDGE('',*,*,#10314,.F.);+#10363 = ADVANCED_FACE('',(#10364),#9137,.T.);+#10364 = FACE_BOUND('',#10365,.T.);+#10365 = EDGE_LOOP('',(#10366,#10367,#10388,#10389));+#10366 = ORIENTED_EDGE('',*,*,#9121,.F.);+#10367 = ORIENTED_EDGE('',*,*,#10368,.T.);+#10368 = EDGE_CURVE('',#9086,#9799,#10369,.T.);+#10369 = SURFACE_CURVE('',#10370,(#10374,#10381),.PCURVE_S1.);+#10370 = LINE('',#10371,#10372);+#10371 = CARTESIAN_POINT('',(1.283350574671,0.168292596548,2.1500001));+#10372 = VECTOR('',#10373,1.);+#10373 = DIRECTION('',(-0.,-0.,-1.));+#10374 = PCURVE('',#9137,#10375);+#10375 = DEFINITIONAL_REPRESENTATION('',(#10376),#10380);+#10376 = LINE('',#10377,#10378);+#10377 = CARTESIAN_POINT('',(0.,0.));+#10378 = VECTOR('',#10379,1.);+#10379 = DIRECTION('',(0.,-1.));+#10380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10381 = PCURVE('',#9105,#10382);+#10382 = DEFINITIONAL_REPRESENTATION('',(#10383),#10387);+#10383 = LINE('',#10384,#10385);+#10384 = CARTESIAN_POINT('',(1.,0.));+#10385 = VECTOR('',#10386,1.);+#10386 = DIRECTION('',(0.,-1.));+#10387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10388 = ORIENTED_EDGE('',*,*,#9821,.T.);+#10389 = ORIENTED_EDGE('',*,*,#10341,.F.);+#10390 = ADVANCED_FACE('',(#10391),#9105,.T.);+#10391 = FACE_BOUND('',#10392,.T.);+#10392 = EDGE_LOOP('',(#10393,#10394,#10415,#10416));+#10393 = ORIENTED_EDGE('',*,*,#9085,.T.);+#10394 = ORIENTED_EDGE('',*,*,#10395,.T.);+#10395 = EDGE_CURVE('',#9050,#9776,#10396,.T.);+#10396 = SURFACE_CURVE('',#10397,(#10401,#10408),.PCURVE_S1.);+#10397 = LINE('',#10398,#10399);+#10398 = CARTESIAN_POINT('',(1.243667945371,0.187536281239,2.1500001));+#10399 = VECTOR('',#10400,1.);+#10400 = DIRECTION('',(-0.,-0.,-1.));+#10401 = PCURVE('',#9105,#10402);+#10402 = DEFINITIONAL_REPRESENTATION('',(#10403),#10407);+#10403 = LINE('',#10404,#10405);+#10404 = CARTESIAN_POINT('',(0.,0.));+#10405 = VECTOR('',#10406,1.);+#10406 = DIRECTION('',(0.,-1.));+#10407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10408 = PCURVE('',#9069,#10409);+#10409 = DEFINITIONAL_REPRESENTATION('',(#10410),#10414);+#10410 = LINE('',#10411,#10412);+#10411 = CARTESIAN_POINT('',(1.,0.));+#10412 = VECTOR('',#10413,1.);+#10413 = DIRECTION('',(0.,-1.));+#10414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10415 = ORIENTED_EDGE('',*,*,#9798,.T.);+#10416 = ORIENTED_EDGE('',*,*,#10368,.F.);+#10417 = ADVANCED_FACE('',(#10418),#9069,.T.);+#10418 = FACE_BOUND('',#10419,.T.);+#10419 = EDGE_LOOP('',(#10420,#10421,#10442,#10443));+#10420 = ORIENTED_EDGE('',*,*,#9049,.T.);+#10421 = ORIENTED_EDGE('',*,*,#10422,.T.);+#10422 = EDGE_CURVE('',#9005,#9753,#10423,.T.);+#10423 = SURFACE_CURVE('',#10424,(#10428,#10435),.PCURVE_S1.);+#10424 = LINE('',#10425,#10426);+#10425 = CARTESIAN_POINT('',(1.200638588299,0.193871158808,2.1500001));+#10426 = VECTOR('',#10427,1.);+#10427 = DIRECTION('',(-0.,-0.,-1.));+#10428 = PCURVE('',#9069,#10429);+#10429 = DEFINITIONAL_REPRESENTATION('',(#10430),#10434);+#10430 = LINE('',#10431,#10432);+#10431 = CARTESIAN_POINT('',(0.,0.));+#10432 = VECTOR('',#10433,1.);+#10433 = DIRECTION('',(0.,-1.));+#10434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10435 = PCURVE('',#9030,#10436);+#10436 = DEFINITIONAL_REPRESENTATION('',(#10437),#10441);+#10437 = LINE('',#10438,#10439);+#10438 = CARTESIAN_POINT('',(1.,0.));+#10439 = VECTOR('',#10440,1.);+#10440 = DIRECTION('',(0.,-1.));+#10441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10442 = ORIENTED_EDGE('',*,*,#9775,.T.);+#10443 = ORIENTED_EDGE('',*,*,#10395,.F.);+#10444 = ADVANCED_FACE('',(#10445),#9030,.T.);+#10445 = FACE_BOUND('',#10446,.T.);+#10446 = EDGE_LOOP('',(#10447,#10448,#10469,#10470));+#10447 = ORIENTED_EDGE('',*,*,#9004,.T.);+#10448 = ORIENTED_EDGE('',*,*,#10449,.T.);+#10449 = EDGE_CURVE('',#8969,#9730,#10450,.T.);+#10450 = SURFACE_CURVE('',#10451,(#10455,#10462),.PCURVE_S1.);+#10451 = LINE('',#10452,#10453);+#10452 = CARTESIAN_POINT('',(1.094260455538,0.144985028134,2.1500001));+#10453 = VECTOR('',#10454,1.);+#10454 = DIRECTION('',(-0.,-0.,-1.));+#10455 = PCURVE('',#9030,#10456);+#10456 = DEFINITIONAL_REPRESENTATION('',(#10457),#10461);+#10457 = LINE('',#10458,#10459);+#10458 = CARTESIAN_POINT('',(0.,0.));+#10459 = VECTOR('',#10460,1.);+#10460 = DIRECTION('',(0.,-1.));+#10461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10462 = PCURVE('',#8988,#10463);+#10463 = DEFINITIONAL_REPRESENTATION('',(#10464),#10468);+#10464 = LINE('',#10465,#10466);+#10465 = CARTESIAN_POINT('',(1.,0.));+#10466 = VECTOR('',#10467,1.);+#10467 = DIRECTION('',(0.,-1.));+#10468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10469 = ORIENTED_EDGE('',*,*,#9752,.T.);+#10470 = ORIENTED_EDGE('',*,*,#10422,.F.);+#10471 = ADVANCED_FACE('',(#10472),#8988,.T.);+#10472 = FACE_BOUND('',#10473,.T.);+#10473 = EDGE_LOOP('',(#10474,#10475,#10496,#10497));+#10474 = ORIENTED_EDGE('',*,*,#8968,.T.);+#10475 = ORIENTED_EDGE('',*,*,#10476,.T.);+#10476 = EDGE_CURVE('',#8933,#9707,#10477,.T.);+#10477 = SURFACE_CURVE('',#10478,(#10482,#10489),.PCURVE_S1.);+#10478 = LINE('',#10479,#10480);+#10479 = CARTESIAN_POINT('',(1.056012138141,8.60587141439E-03,2.1500001)+ );+#10480 = VECTOR('',#10481,1.);+#10481 = DIRECTION('',(-0.,-0.,-1.));+#10482 = PCURVE('',#8988,#10483);+#10483 = DEFINITIONAL_REPRESENTATION('',(#10484),#10488);+#10484 = LINE('',#10485,#10486);+#10485 = CARTESIAN_POINT('',(0.,0.));+#10486 = VECTOR('',#10487,1.);+#10487 = DIRECTION('',(0.,-1.));+#10488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10489 = PCURVE('',#8952,#10490);+#10490 = DEFINITIONAL_REPRESENTATION('',(#10491),#10495);+#10491 = LINE('',#10492,#10493);+#10492 = CARTESIAN_POINT('',(1.,0.));+#10493 = VECTOR('',#10494,1.);+#10494 = DIRECTION('',(0.,-1.));+#10495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10496 = ORIENTED_EDGE('',*,*,#9729,.T.);+#10497 = ORIENTED_EDGE('',*,*,#10449,.F.);+#10498 = ADVANCED_FACE('',(#10499),#8952,.T.);+#10499 = FACE_BOUND('',#10500,.T.);+#10500 = EDGE_LOOP('',(#10501,#10502,#10523,#10524));+#10501 = ORIENTED_EDGE('',*,*,#8932,.T.);+#10502 = ORIENTED_EDGE('',*,*,#10503,.T.);+#10503 = EDGE_CURVE('',#8888,#9684,#10504,.T.);+#10504 = SURFACE_CURVE('',#10505,(#10509,#10516),.PCURVE_S1.);+#10505 = LINE('',#10506,#10507);+#10506 = CARTESIAN_POINT('',(1.093782351571,-0.127773285305,2.1500001));+#10507 = VECTOR('',#10508,1.);+#10508 = DIRECTION('',(-0.,-0.,-1.));+#10509 = PCURVE('',#8952,#10510);+#10510 = DEFINITIONAL_REPRESENTATION('',(#10511),#10515);+#10511 = LINE('',#10512,#10513);+#10512 = CARTESIAN_POINT('',(0.,0.));+#10513 = VECTOR('',#10514,1.);+#10514 = DIRECTION('',(0.,-1.));+#10515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10516 = PCURVE('',#8913,#10517);+#10517 = DEFINITIONAL_REPRESENTATION('',(#10518),#10522);+#10518 = LINE('',#10519,#10520);+#10519 = CARTESIAN_POINT('',(1.,0.));+#10520 = VECTOR('',#10521,1.);+#10521 = DIRECTION('',(0.,-1.));+#10522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10523 = ORIENTED_EDGE('',*,*,#9706,.T.);+#10524 = ORIENTED_EDGE('',*,*,#10476,.F.);+#10525 = ADVANCED_FACE('',(#10526),#8913,.T.);+#10526 = FACE_BOUND('',#10527,.T.);+#10527 = EDGE_LOOP('',(#10528,#10529,#10550,#10551));+#10528 = ORIENTED_EDGE('',*,*,#8887,.T.);+#10529 = ORIENTED_EDGE('',*,*,#10530,.T.);+#10530 = EDGE_CURVE('',#8852,#9661,#10531,.T.);+#10531 = SURFACE_CURVE('',#10532,(#10536,#10543),.PCURVE_S1.);+#10532 = LINE('',#10533,#10534);+#10533 = CARTESIAN_POINT('',(1.199443328381,-0.176420363995,2.1500001));+#10534 = VECTOR('',#10535,1.);+#10535 = DIRECTION('',(-0.,-0.,-1.));+#10536 = PCURVE('',#8913,#10537);+#10537 = DEFINITIONAL_REPRESENTATION('',(#10538),#10542);+#10538 = LINE('',#10539,#10540);+#10539 = CARTESIAN_POINT('',(0.,0.));+#10540 = VECTOR('',#10541,1.);+#10541 = DIRECTION('',(0.,-1.));+#10542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10543 = PCURVE('',#8871,#10544);+#10544 = DEFINITIONAL_REPRESENTATION('',(#10545),#10549);+#10545 = LINE('',#10546,#10547);+#10546 = CARTESIAN_POINT('',(1.,0.));+#10547 = VECTOR('',#10548,1.);+#10548 = DIRECTION('',(0.,-1.));+#10549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10550 = ORIENTED_EDGE('',*,*,#9683,.T.);+#10551 = ORIENTED_EDGE('',*,*,#10503,.F.);+#10552 = ADVANCED_FACE('',(#10553),#8871,.T.);+#10553 = FACE_BOUND('',#10554,.T.);+#10554 = EDGE_LOOP('',(#10555,#10556,#10577,#10578));+#10555 = ORIENTED_EDGE('',*,*,#8851,.T.);+#10556 = ORIENTED_EDGE('',*,*,#10557,.T.);+#10557 = EDGE_CURVE('',#8816,#9638,#10558,.T.);+#10558 = SURFACE_CURVE('',#10559,(#10563,#10570),.PCURVE_S1.);+#10559 = LINE('',#10560,#10561);+#10560 = CARTESIAN_POINT('',(1.25191523881,-0.167216862621,2.1500001));+#10561 = VECTOR('',#10562,1.);+#10562 = DIRECTION('',(-0.,-0.,-1.));+#10563 = PCURVE('',#8871,#10564);+#10564 = DEFINITIONAL_REPRESENTATION('',(#10565),#10569);+#10565 = LINE('',#10566,#10567);+#10566 = CARTESIAN_POINT('',(0.,0.));+#10567 = VECTOR('',#10568,1.);+#10568 = DIRECTION('',(0.,-1.));+#10569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10570 = PCURVE('',#8835,#10571);+#10571 = DEFINITIONAL_REPRESENTATION('',(#10572),#10576);+#10572 = LINE('',#10573,#10574);+#10573 = CARTESIAN_POINT('',(1.,0.));+#10574 = VECTOR('',#10575,1.);+#10575 = DIRECTION('',(0.,-1.));+#10576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10577 = ORIENTED_EDGE('',*,*,#9660,.T.);+#10578 = ORIENTED_EDGE('',*,*,#10530,.F.);+#10579 = ADVANCED_FACE('',(#10580),#8835,.T.);+#10580 = FACE_BOUND('',#10581,.T.);+#10581 = EDGE_LOOP('',(#10582,#10583,#10604,#10605));+#10582 = ORIENTED_EDGE('',*,*,#8815,.T.);+#10583 = ORIENTED_EDGE('',*,*,#10584,.T.);+#10584 = EDGE_CURVE('',#8789,#9615,#10585,.T.);+#10585 = SURFACE_CURVE('',#10586,(#10590,#10597),.PCURVE_S1.);+#10586 = LINE('',#10587,#10588);+#10587 = CARTESIAN_POINT('',(1.295542225841,-0.140084462468,2.1500001));+#10588 = VECTOR('',#10589,1.);+#10589 = DIRECTION('',(-0.,-0.,-1.));+#10590 = PCURVE('',#8835,#10591);+#10591 = DEFINITIONAL_REPRESENTATION('',(#10592),#10596);+#10592 = LINE('',#10593,#10594);+#10593 = CARTESIAN_POINT('',(0.,0.));+#10594 = VECTOR('',#10595,1.);+#10595 = DIRECTION('',(0.,-1.));+#10596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10597 = PCURVE('',#8804,#10598);+#10598 = DEFINITIONAL_REPRESENTATION('',(#10599),#10603);+#10599 = LINE('',#10600,#10601);+#10600 = CARTESIAN_POINT('',(0.15371042554,0.));+#10601 = VECTOR('',#10602,1.);+#10602 = DIRECTION('',(0.,-1.));+#10603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10604 = ORIENTED_EDGE('',*,*,#9637,.T.);+#10605 = ORIENTED_EDGE('',*,*,#10557,.F.);+#10606 = ADVANCED_FACE('',(#10607),#8804,.T.);+#10607 = FACE_BOUND('',#10608,.T.);+#10608 = EDGE_LOOP('',(#10609,#10610,#10631,#10632));+#10609 = ORIENTED_EDGE('',*,*,#8788,.F.);+#10610 = ORIENTED_EDGE('',*,*,#10611,.T.);+#10611 = EDGE_CURVE('',#8762,#9613,#10612,.T.);+#10612 = SURFACE_CURVE('',#10613,(#10617,#10624),.PCURVE_S1.);+#10613 = LINE('',#10614,#10615);+#10614 = CARTESIAN_POINT('',(1.295542225841,1.362596307278E-02,2.1500001+ ));+#10615 = VECTOR('',#10616,1.);+#10616 = DIRECTION('',(-0.,-0.,-1.));+#10617 = PCURVE('',#8804,#10618);+#10618 = DEFINITIONAL_REPRESENTATION('',(#10619),#10623);+#10619 = LINE('',#10620,#10621);+#10620 = CARTESIAN_POINT('',(0.,0.));+#10621 = VECTOR('',#10622,1.);+#10622 = DIRECTION('',(0.,-1.));+#10623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10624 = PCURVE('',#8777,#10625);+#10625 = DEFINITIONAL_REPRESENTATION('',(#10626),#10630);+#10626 = LINE('',#10627,#10628);+#10627 = CARTESIAN_POINT('',(9.801131333055E-02,0.));+#10628 = VECTOR('',#10629,1.);+#10629 = DIRECTION('',(0.,-1.));+#10630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10631 = ORIENTED_EDGE('',*,*,#9612,.T.);+#10632 = ORIENTED_EDGE('',*,*,#10584,.F.);+#10633 = ADVANCED_FACE('',(#10634),#8777,.T.);+#10634 = FACE_BOUND('',#10635,.T.);+#10635 = EDGE_LOOP('',(#10636,#10637,#10638,#10639));+#10636 = ORIENTED_EDGE('',*,*,#8759,.F.);+#10637 = ORIENTED_EDGE('',*,*,#9588,.T.);+#10638 = ORIENTED_EDGE('',*,*,#10073,.T.);+#10639 = ORIENTED_EDGE('',*,*,#10611,.F.);+#10640 = ADVANCED_FACE('',(#10641),#8746,.T.);+#10641 = FACE_BOUND('',#10642,.T.);+#10642 = EDGE_LOOP('',(#10643,#10644,#10667,#10695));+#10643 = ORIENTED_EDGE('',*,*,#8732,.F.);+#10644 = ORIENTED_EDGE('',*,*,#10645,.T.);+#10645 = EDGE_CURVE('',#8706,#10646,#10648,.T.);+#10646 = VERTEX_POINT('',#10647);+#10647 = CARTESIAN_POINT('',(0.816721102424,0.124307031541,2.0500001));+#10648 = SURFACE_CURVE('',#10649,(#10653,#10660),.PCURVE_S1.);+#10649 = LINE('',#10650,#10651);+#10650 = CARTESIAN_POINT('',(0.816721102424,0.124307031541,2.1500001));+#10651 = VECTOR('',#10652,1.);+#10652 = DIRECTION('',(-0.,-0.,-1.));+#10653 = PCURVE('',#8746,#10654);+#10654 = DEFINITIONAL_REPRESENTATION('',(#10655),#10659);+#10655 = LINE('',#10656,#10657);+#10656 = CARTESIAN_POINT('',(-5.551115123126E-17,0.));+#10657 = VECTOR('',#10658,1.);+#10658 = DIRECTION('',(0.,-1.));+#10659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10660 = PCURVE('',#8721,#10661);+#10661 = DEFINITIONAL_REPRESENTATION('',(#10662),#10666);+#10662 = LINE('',#10663,#10664);+#10663 = CARTESIAN_POINT('',(0.317539598615,0.));+#10664 = VECTOR('',#10665,1.);+#10665 = DIRECTION('',(0.,-1.));+#10666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10667 = ORIENTED_EDGE('',*,*,#10668,.T.);+#10668 = EDGE_CURVE('',#10646,#10669,#10671,.T.);+#10669 = VERTEX_POINT('',#10670);+#10670 = CARTESIAN_POINT('',(0.816721102424,-0.169487856467,2.0500001));+#10671 = SURFACE_CURVE('',#10672,(#10676,#10683),.PCURVE_S1.);+#10672 = LINE('',#10673,#10674);+#10673 = CARTESIAN_POINT('',(0.816721102424,0.124307031541,2.0500001));+#10674 = VECTOR('',#10675,1.);+#10675 = DIRECTION('',(0.,-1.,0.));+#10676 = PCURVE('',#8746,#10677);+#10677 = DEFINITIONAL_REPRESENTATION('',(#10678),#10682);+#10678 = LINE('',#10679,#10680);+#10679 = CARTESIAN_POINT('',(0.,-0.1));+#10680 = VECTOR('',#10681,1.);+#10681 = DIRECTION('',(1.,0.));+#10682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10683 = PCURVE('',#10684,#10689);+#10684 = PLANE('',#10685);+#10685 = AXIS2_PLACEMENT_3D('',#10686,#10687,#10688);+#10686 = CARTESIAN_POINT('',(0.736877739857,-0.169487856467,2.0500001));+#10687 = DIRECTION('',(0.,0.,1.));+#10688 = DIRECTION('',(1.,0.,0.));+#10689 = DEFINITIONAL_REPRESENTATION('',(#10690),#10694);+#10690 = LINE('',#10691,#10692);+#10691 = CARTESIAN_POINT('',(7.984336256684E-02,0.293794888008));+#10692 = VECTOR('',#10693,1.);+#10693 = DIRECTION('',(0.,-1.));+#10694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10695 = ORIENTED_EDGE('',*,*,#10696,.F.);+#10696 = EDGE_CURVE('',#8488,#10669,#10697,.T.);+#10697 = SURFACE_CURVE('',#10698,(#10702,#10709),.PCURVE_S1.);+#10698 = LINE('',#10699,#10700);+#10699 = CARTESIAN_POINT('',(0.816721102424,-0.169487856467,2.1500001));+#10700 = VECTOR('',#10701,1.);+#10701 = DIRECTION('',(-0.,-0.,-1.));+#10702 = PCURVE('',#8746,#10703);+#10703 = DEFINITIONAL_REPRESENTATION('',(#10704),#10708);+#10704 = LINE('',#10705,#10706);+#10705 = CARTESIAN_POINT('',(0.293794888008,0.));+#10706 = VECTOR('',#10707,1.);+#10707 = DIRECTION('',(0.,-1.));+#10708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10709 = PCURVE('',#8505,#10710);+#10710 = DEFINITIONAL_REPRESENTATION('',(#10711),#10715);+#10711 = LINE('',#10712,#10713);+#10712 = CARTESIAN_POINT('',(0.,0.));+#10713 = VECTOR('',#10714,1.);+#10714 = DIRECTION('',(0.,-1.));+#10715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10716 = ADVANCED_FACE('',(#10717),#10684,.T.);+#10717 = FACE_BOUND('',#10718,.F.);+#10718 = EDGE_LOOP('',(#10719,#10744,#10767,#10790,#10813,#10836,#10859,+ #10882,#10903,#10904));+#10719 = ORIENTED_EDGE('',*,*,#10720,.T.);+#10720 = EDGE_CURVE('',#10721,#10723,#10725,.T.);+#10721 = VERTEX_POINT('',#10722);+#10722 = CARTESIAN_POINT('',(0.770105965596,-0.169487856467,2.0500001));+#10723 = VERTEX_POINT('',#10724);+#10724 = CARTESIAN_POINT('',(0.770105965596,0.187416755247,2.0500001));+#10725 = SURFACE_CURVE('',#10726,(#10730,#10737),.PCURVE_S1.);+#10726 = LINE('',#10727,#10728);+#10727 = CARTESIAN_POINT('',(0.770105965596,-0.169487856467,2.0500001));+#10728 = VECTOR('',#10729,1.);+#10729 = DIRECTION('',(0.,1.,0.));+#10730 = PCURVE('',#10684,#10731);+#10731 = DEFINITIONAL_REPRESENTATION('',(#10732),#10736);+#10732 = LINE('',#10733,#10734);+#10733 = CARTESIAN_POINT('',(3.322822573889E-02,0.));+#10734 = VECTOR('',#10735,1.);+#10735 = DIRECTION('',(0.,1.));+#10736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10737 = PCURVE('',#8532,#10738);+#10738 = DEFINITIONAL_REPRESENTATION('',(#10739),#10743);+#10739 = LINE('',#10740,#10741);+#10740 = CARTESIAN_POINT('',(0.,-0.1));+#10741 = VECTOR('',#10742,1.);+#10742 = DIRECTION('',(1.,0.));+#10743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10744 = ORIENTED_EDGE('',*,*,#10745,.T.);+#10745 = EDGE_CURVE('',#10723,#10746,#10748,.T.);+#10746 = VERTEX_POINT('',#10747);+#10747 = CARTESIAN_POINT('',(0.831303273432,0.187416755247,2.0500001));+#10748 = SURFACE_CURVE('',#10749,(#10753,#10760),.PCURVE_S1.);+#10749 = LINE('',#10750,#10751);+#10750 = CARTESIAN_POINT('',(0.770105965596,0.187416755247,2.0500001));+#10751 = VECTOR('',#10752,1.);+#10752 = DIRECTION('',(1.,0.,0.));+#10753 = PCURVE('',#10684,#10754);+#10754 = DEFINITIONAL_REPRESENTATION('',(#10755),#10759);+#10755 = LINE('',#10756,#10757);+#10756 = CARTESIAN_POINT('',(3.322822573889E-02,0.356904611713));+#10757 = VECTOR('',#10758,1.);+#10758 = DIRECTION('',(1.,0.));+#10759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10760 = PCURVE('',#8559,#10761);+#10761 = DEFINITIONAL_REPRESENTATION('',(#10762),#10766);+#10762 = LINE('',#10763,#10764);+#10763 = CARTESIAN_POINT('',(0.,-0.1));+#10764 = VECTOR('',#10765,1.);+#10765 = DIRECTION('',(1.,0.));+#10766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10767 = ORIENTED_EDGE('',*,*,#10768,.T.);+#10768 = EDGE_CURVE('',#10746,#10769,#10771,.T.);+#10769 = VERTEX_POINT('',#10770);+#10770 = CARTESIAN_POINT('',(0.951785473233,-0.106378132761,2.0500001));+#10771 = SURFACE_CURVE('',#10772,(#10776,#10783),.PCURVE_S1.);+#10772 = LINE('',#10773,#10774);+#10773 = CARTESIAN_POINT('',(0.831303273432,0.187416755247,2.0500001));+#10774 = VECTOR('',#10775,1.);+#10775 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#10776 = PCURVE('',#10684,#10777);+#10777 = DEFINITIONAL_REPRESENTATION('',(#10778),#10782);+#10778 = LINE('',#10779,#10780);+#10779 = CARTESIAN_POINT('',(9.442553357455E-02,0.356904611713));+#10780 = VECTOR('',#10781,1.);+#10781 = DIRECTION('',(0.379424173637,-0.92522283611));+#10782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10783 = PCURVE('',#8586,#10784);+#10784 = DEFINITIONAL_REPRESENTATION('',(#10785),#10789);+#10785 = LINE('',#10786,#10787);+#10786 = CARTESIAN_POINT('',(0.,-0.1));+#10787 = VECTOR('',#10788,1.);+#10788 = DIRECTION('',(1.,0.));+#10789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10790 = ORIENTED_EDGE('',*,*,#10791,.T.);+#10791 = EDGE_CURVE('',#10769,#10792,#10794,.T.);+#10792 = VERTEX_POINT('',#10793);+#10793 = CARTESIAN_POINT('',(0.951785473233,0.187416755247,2.0500001));+#10794 = SURFACE_CURVE('',#10795,(#10799,#10806),.PCURVE_S1.);+#10795 = LINE('',#10796,#10797);+#10796 = CARTESIAN_POINT('',(0.951785473233,-0.106378132761,2.0500001));+#10797 = VECTOR('',#10798,1.);+#10798 = DIRECTION('',(0.,1.,0.));+#10799 = PCURVE('',#10684,#10800);+#10800 = DEFINITIONAL_REPRESENTATION('',(#10801),#10805);+#10801 = LINE('',#10802,#10803);+#10802 = CARTESIAN_POINT('',(0.214907733376,6.310972370552E-02));+#10803 = VECTOR('',#10804,1.);+#10804 = DIRECTION('',(0.,1.));+#10805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10806 = PCURVE('',#8613,#10807);+#10807 = DEFINITIONAL_REPRESENTATION('',(#10808),#10812);+#10808 = LINE('',#10809,#10810);+#10809 = CARTESIAN_POINT('',(0.,-0.1));+#10810 = VECTOR('',#10811,1.);+#10811 = DIRECTION('',(1.,0.));+#10812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10813 = ORIENTED_EDGE('',*,*,#10814,.T.);+#10814 = EDGE_CURVE('',#10792,#10815,#10817,.T.);+#10815 = VERTEX_POINT('',#10816);+#10816 = CARTESIAN_POINT('',(0.998400610061,0.187416755247,2.0500001));+#10817 = SURFACE_CURVE('',#10818,(#10822,#10829),.PCURVE_S1.);+#10818 = LINE('',#10819,#10820);+#10819 = CARTESIAN_POINT('',(0.951785473233,0.187416755247,2.0500001));+#10820 = VECTOR('',#10821,1.);+#10821 = DIRECTION('',(1.,0.,0.));+#10822 = PCURVE('',#10684,#10823);+#10823 = DEFINITIONAL_REPRESENTATION('',(#10824),#10828);+#10824 = LINE('',#10825,#10826);+#10825 = CARTESIAN_POINT('',(0.214907733376,0.356904611713));+#10826 = VECTOR('',#10827,1.);+#10827 = DIRECTION('',(1.,0.));+#10828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10829 = PCURVE('',#8640,#10830);+#10830 = DEFINITIONAL_REPRESENTATION('',(#10831),#10835);+#10831 = LINE('',#10832,#10833);+#10832 = CARTESIAN_POINT('',(0.,-0.1));+#10833 = VECTOR('',#10834,1.);+#10834 = DIRECTION('',(1.,0.));+#10835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10836 = ORIENTED_EDGE('',*,*,#10837,.T.);+#10837 = EDGE_CURVE('',#10815,#10838,#10840,.T.);+#10838 = VERTEX_POINT('',#10839);+#10839 = CARTESIAN_POINT('',(0.998400610061,-0.169487856467,2.0500001));+#10840 = SURFACE_CURVE('',#10841,(#10845,#10852),.PCURVE_S1.);+#10841 = LINE('',#10842,#10843);+#10842 = CARTESIAN_POINT('',(0.998400610061,0.187416755247,2.0500001));+#10843 = VECTOR('',#10844,1.);+#10844 = DIRECTION('',(0.,-1.,0.));+#10845 = PCURVE('',#10684,#10846);+#10846 = DEFINITIONAL_REPRESENTATION('',(#10847),#10851);+#10847 = LINE('',#10848,#10849);+#10848 = CARTESIAN_POINT('',(0.261522870204,0.356904611713));+#10849 = VECTOR('',#10850,1.);+#10850 = DIRECTION('',(0.,-1.));+#10851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10852 = PCURVE('',#8667,#10853);+#10853 = DEFINITIONAL_REPRESENTATION('',(#10854),#10858);+#10854 = LINE('',#10855,#10856);+#10855 = CARTESIAN_POINT('',(0.,-0.1));+#10856 = VECTOR('',#10857,1.);+#10857 = DIRECTION('',(1.,0.));+#10858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10859 = ORIENTED_EDGE('',*,*,#10860,.T.);+#10860 = EDGE_CURVE('',#10838,#10861,#10863,.T.);+#10861 = VERTEX_POINT('',#10862);+#10862 = CARTESIAN_POINT('',(0.937203302225,-0.169487856467,2.0500001));+#10863 = SURFACE_CURVE('',#10864,(#10868,#10875),.PCURVE_S1.);+#10864 = LINE('',#10865,#10866);+#10865 = CARTESIAN_POINT('',(0.998400610061,-0.169487856467,2.0500001));+#10866 = VECTOR('',#10867,1.);+#10867 = DIRECTION('',(-1.,0.,0.));+#10868 = PCURVE('',#10684,#10869);+#10869 = DEFINITIONAL_REPRESENTATION('',(#10870),#10874);+#10870 = LINE('',#10871,#10872);+#10871 = CARTESIAN_POINT('',(0.261522870204,0.));+#10872 = VECTOR('',#10873,1.);+#10873 = DIRECTION('',(-1.,0.));+#10874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10875 = PCURVE('',#8694,#10876);+#10876 = DEFINITIONAL_REPRESENTATION('',(#10877),#10881);+#10877 = LINE('',#10878,#10879);+#10878 = CARTESIAN_POINT('',(0.,-0.1));+#10879 = VECTOR('',#10880,1.);+#10880 = DIRECTION('',(1.,0.));+#10881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10882 = ORIENTED_EDGE('',*,*,#10883,.T.);+#10883 = EDGE_CURVE('',#10861,#10646,#10884,.T.);+#10884 = SURFACE_CURVE('',#10885,(#10889,#10896),.PCURVE_S1.);+#10885 = LINE('',#10886,#10887);+#10886 = CARTESIAN_POINT('',(0.937203302225,-0.169487856467,2.0500001));+#10887 = VECTOR('',#10888,1.);+#10888 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#10889 = PCURVE('',#10684,#10890);+#10890 = DEFINITIONAL_REPRESENTATION('',(#10891),#10895);+#10891 = LINE('',#10892,#10893);+#10892 = CARTESIAN_POINT('',(0.200325562368,0.));+#10893 = VECTOR('',#10894,1.);+#10894 = DIRECTION('',(-0.379424173637,0.92522283611));+#10895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10896 = PCURVE('',#8721,#10897);+#10897 = DEFINITIONAL_REPRESENTATION('',(#10898),#10902);+#10898 = LINE('',#10899,#10900);+#10899 = CARTESIAN_POINT('',(0.,-0.1));+#10900 = VECTOR('',#10901,1.);+#10901 = DIRECTION('',(1.,0.));+#10902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10903 = ORIENTED_EDGE('',*,*,#10668,.T.);+#10904 = ORIENTED_EDGE('',*,*,#10905,.T.);+#10905 = EDGE_CURVE('',#10669,#10721,#10906,.T.);+#10906 = SURFACE_CURVE('',#10907,(#10911,#10918),.PCURVE_S1.);+#10907 = LINE('',#10908,#10909);+#10908 = CARTESIAN_POINT('',(0.816721102424,-0.169487856467,2.0500001));+#10909 = VECTOR('',#10910,1.);+#10910 = DIRECTION('',(-1.,0.,0.));+#10911 = PCURVE('',#10684,#10912);+#10912 = DEFINITIONAL_REPRESENTATION('',(#10913),#10917);+#10913 = LINE('',#10914,#10915);+#10914 = CARTESIAN_POINT('',(7.984336256684E-02,0.));+#10915 = VECTOR('',#10916,1.);+#10916 = DIRECTION('',(-1.,0.));+#10917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10918 = PCURVE('',#8505,#10919);+#10919 = DEFINITIONAL_REPRESENTATION('',(#10920),#10924);+#10920 = LINE('',#10921,#10922);+#10921 = CARTESIAN_POINT('',(0.,-0.1));+#10922 = VECTOR('',#10923,1.);+#10923 = DIRECTION('',(1.,0.));+#10924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10925 = ADVANCED_FACE('',(#10926),#8721,.T.);+#10926 = FACE_BOUND('',#10927,.T.);+#10927 = EDGE_LOOP('',(#10928,#10929,#10950,#10951));+#10928 = ORIENTED_EDGE('',*,*,#8705,.F.);+#10929 = ORIENTED_EDGE('',*,*,#10930,.T.);+#10930 = EDGE_CURVE('',#8679,#10861,#10931,.T.);+#10931 = SURFACE_CURVE('',#10932,(#10936,#10943),.PCURVE_S1.);+#10932 = LINE('',#10933,#10934);+#10933 = CARTESIAN_POINT('',(0.937203302225,-0.169487856467,2.1500001));+#10934 = VECTOR('',#10935,1.);+#10935 = DIRECTION('',(-0.,-0.,-1.));+#10936 = PCURVE('',#8721,#10937);+#10937 = DEFINITIONAL_REPRESENTATION('',(#10938),#10942);+#10938 = LINE('',#10939,#10940);+#10939 = CARTESIAN_POINT('',(0.,0.));+#10940 = VECTOR('',#10941,1.);+#10941 = DIRECTION('',(0.,-1.));+#10942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10943 = PCURVE('',#8694,#10944);+#10944 = DEFINITIONAL_REPRESENTATION('',(#10945),#10949);+#10945 = LINE('',#10946,#10947);+#10946 = CARTESIAN_POINT('',(6.119730783566E-02,0.));+#10947 = VECTOR('',#10948,1.);+#10948 = DIRECTION('',(0.,-1.));+#10949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10950 = ORIENTED_EDGE('',*,*,#10883,.T.);+#10951 = ORIENTED_EDGE('',*,*,#10645,.F.);+#10952 = ADVANCED_FACE('',(#10953),#8694,.T.);+#10953 = FACE_BOUND('',#10954,.T.);+#10954 = EDGE_LOOP('',(#10955,#10956,#10977,#10978));+#10955 = ORIENTED_EDGE('',*,*,#8678,.F.);+#10956 = ORIENTED_EDGE('',*,*,#10957,.T.);+#10957 = EDGE_CURVE('',#8652,#10838,#10958,.T.);+#10958 = SURFACE_CURVE('',#10959,(#10963,#10970),.PCURVE_S1.);+#10959 = LINE('',#10960,#10961);+#10960 = CARTESIAN_POINT('',(0.998400610061,-0.169487856467,2.1500001));+#10961 = VECTOR('',#10962,1.);+#10962 = DIRECTION('',(-0.,-0.,-1.));+#10963 = PCURVE('',#8694,#10964);+#10964 = DEFINITIONAL_REPRESENTATION('',(#10965),#10969);+#10965 = LINE('',#10966,#10967);+#10966 = CARTESIAN_POINT('',(0.,0.));+#10967 = VECTOR('',#10968,1.);+#10968 = DIRECTION('',(0.,-1.));+#10969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10970 = PCURVE('',#8667,#10971);+#10971 = DEFINITIONAL_REPRESENTATION('',(#10972),#10976);+#10972 = LINE('',#10973,#10974);+#10973 = CARTESIAN_POINT('',(0.356904611713,0.));+#10974 = VECTOR('',#10975,1.);+#10975 = DIRECTION('',(0.,-1.));+#10976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10977 = ORIENTED_EDGE('',*,*,#10860,.T.);+#10978 = ORIENTED_EDGE('',*,*,#10930,.F.);+#10979 = ADVANCED_FACE('',(#10980),#8667,.T.);+#10980 = FACE_BOUND('',#10981,.T.);+#10981 = EDGE_LOOP('',(#10982,#10983,#11004,#11005));+#10982 = ORIENTED_EDGE('',*,*,#8651,.F.);+#10983 = ORIENTED_EDGE('',*,*,#10984,.T.);+#10984 = EDGE_CURVE('',#8625,#10815,#10985,.T.);+#10985 = SURFACE_CURVE('',#10986,(#10990,#10997),.PCURVE_S1.);+#10986 = LINE('',#10987,#10988);+#10987 = CARTESIAN_POINT('',(0.998400610061,0.187416755247,2.1500001));+#10988 = VECTOR('',#10989,1.);+#10989 = DIRECTION('',(-0.,-0.,-1.));+#10990 = PCURVE('',#8667,#10991);+#10991 = DEFINITIONAL_REPRESENTATION('',(#10992),#10996);+#10992 = LINE('',#10993,#10994);+#10993 = CARTESIAN_POINT('',(0.,0.));+#10994 = VECTOR('',#10995,1.);+#10995 = DIRECTION('',(0.,-1.));+#10996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10997 = PCURVE('',#8640,#10998);+#10998 = DEFINITIONAL_REPRESENTATION('',(#10999),#11003);+#10999 = LINE('',#11000,#11001);+#11000 = CARTESIAN_POINT('',(4.661513682794E-02,0.));+#11001 = VECTOR('',#11002,1.);+#11002 = DIRECTION('',(0.,-1.));+#11003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11004 = ORIENTED_EDGE('',*,*,#10837,.T.);+#11005 = ORIENTED_EDGE('',*,*,#10957,.F.);+#11006 = ADVANCED_FACE('',(#11007),#8640,.T.);+#11007 = FACE_BOUND('',#11008,.T.);+#11008 = EDGE_LOOP('',(#11009,#11010,#11031,#11032));+#11009 = ORIENTED_EDGE('',*,*,#8624,.F.);+#11010 = ORIENTED_EDGE('',*,*,#11011,.T.);+#11011 = EDGE_CURVE('',#8598,#10792,#11012,.T.);+#11012 = SURFACE_CURVE('',#11013,(#11017,#11024),.PCURVE_S1.);+#11013 = LINE('',#11014,#11015);+#11014 = CARTESIAN_POINT('',(0.951785473233,0.187416755247,2.1500001));+#11015 = VECTOR('',#11016,1.);+#11016 = DIRECTION('',(-0.,-0.,-1.));+#11017 = PCURVE('',#8640,#11018);+#11018 = DEFINITIONAL_REPRESENTATION('',(#11019),#11023);+#11019 = LINE('',#11020,#11021);+#11020 = CARTESIAN_POINT('',(0.,0.));+#11021 = VECTOR('',#11022,1.);+#11022 = DIRECTION('',(0.,-1.));+#11023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11024 = PCURVE('',#8613,#11025);+#11025 = DEFINITIONAL_REPRESENTATION('',(#11026),#11030);+#11026 = LINE('',#11027,#11028);+#11027 = CARTESIAN_POINT('',(0.293794888008,0.));+#11028 = VECTOR('',#11029,1.);+#11029 = DIRECTION('',(0.,-1.));+#11030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11031 = ORIENTED_EDGE('',*,*,#10814,.T.);+#11032 = ORIENTED_EDGE('',*,*,#10984,.F.);+#11033 = ADVANCED_FACE('',(#11034),#8613,.T.);+#11034 = FACE_BOUND('',#11035,.T.);+#11035 = EDGE_LOOP('',(#11036,#11037,#11058,#11059));+#11036 = ORIENTED_EDGE('',*,*,#8597,.F.);+#11037 = ORIENTED_EDGE('',*,*,#11038,.T.);+#11038 = EDGE_CURVE('',#8571,#10769,#11039,.T.);+#11039 = SURFACE_CURVE('',#11040,(#11044,#11051),.PCURVE_S1.);+#11040 = LINE('',#11041,#11042);+#11041 = CARTESIAN_POINT('',(0.951785473233,-0.106378132761,2.1500001));+#11042 = VECTOR('',#11043,1.);+#11043 = DIRECTION('',(-0.,-0.,-1.));+#11044 = PCURVE('',#8613,#11045);+#11045 = DEFINITIONAL_REPRESENTATION('',(#11046),#11050);+#11046 = LINE('',#11047,#11048);+#11047 = CARTESIAN_POINT('',(-1.387778780781E-17,0.));+#11048 = VECTOR('',#11049,1.);+#11049 = DIRECTION('',(0.,-1.));+#11050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11051 = PCURVE('',#8586,#11052);+#11052 = DEFINITIONAL_REPRESENTATION('',(#11053),#11057);+#11053 = LINE('',#11054,#11055);+#11054 = CARTESIAN_POINT('',(0.317539598615,0.));+#11055 = VECTOR('',#11056,1.);+#11056 = DIRECTION('',(0.,-1.));+#11057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11058 = ORIENTED_EDGE('',*,*,#10791,.T.);+#11059 = ORIENTED_EDGE('',*,*,#11011,.F.);+#11060 = ADVANCED_FACE('',(#11061),#8586,.T.);+#11061 = FACE_BOUND('',#11062,.T.);+#11062 = EDGE_LOOP('',(#11063,#11064,#11085,#11086));+#11063 = ORIENTED_EDGE('',*,*,#8570,.F.);+#11064 = ORIENTED_EDGE('',*,*,#11065,.T.);+#11065 = EDGE_CURVE('',#8544,#10746,#11066,.T.);+#11066 = SURFACE_CURVE('',#11067,(#11071,#11078),.PCURVE_S1.);+#11067 = LINE('',#11068,#11069);+#11068 = CARTESIAN_POINT('',(0.831303273432,0.187416755247,2.1500001));+#11069 = VECTOR('',#11070,1.);+#11070 = DIRECTION('',(-0.,-0.,-1.));+#11071 = PCURVE('',#8586,#11072);+#11072 = DEFINITIONAL_REPRESENTATION('',(#11073),#11077);+#11073 = LINE('',#11074,#11075);+#11074 = CARTESIAN_POINT('',(0.,0.));+#11075 = VECTOR('',#11076,1.);+#11076 = DIRECTION('',(0.,-1.));+#11077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11078 = PCURVE('',#8559,#11079);+#11079 = DEFINITIONAL_REPRESENTATION('',(#11080),#11084);+#11080 = LINE('',#11081,#11082);+#11081 = CARTESIAN_POINT('',(6.119730783566E-02,0.));+#11082 = VECTOR('',#11083,1.);+#11083 = DIRECTION('',(0.,-1.));+#11084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11085 = ORIENTED_EDGE('',*,*,#10768,.T.);+#11086 = ORIENTED_EDGE('',*,*,#11038,.F.);+#11087 = ADVANCED_FACE('',(#11088),#8559,.T.);+#11088 = FACE_BOUND('',#11089,.T.);+#11089 = EDGE_LOOP('',(#11090,#11091,#11112,#11113));+#11090 = ORIENTED_EDGE('',*,*,#8543,.F.);+#11091 = ORIENTED_EDGE('',*,*,#11092,.T.);+#11092 = EDGE_CURVE('',#8517,#10723,#11093,.T.);+#11093 = SURFACE_CURVE('',#11094,(#11098,#11105),.PCURVE_S1.);+#11094 = LINE('',#11095,#11096);+#11095 = CARTESIAN_POINT('',(0.770105965596,0.187416755247,2.1500001));+#11096 = VECTOR('',#11097,1.);+#11097 = DIRECTION('',(-0.,-0.,-1.));+#11098 = PCURVE('',#8559,#11099);+#11099 = DEFINITIONAL_REPRESENTATION('',(#11100),#11104);+#11100 = LINE('',#11101,#11102);+#11101 = CARTESIAN_POINT('',(0.,0.));+#11102 = VECTOR('',#11103,1.);+#11103 = DIRECTION('',(0.,-1.));+#11104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11105 = PCURVE('',#8532,#11106);+#11106 = DEFINITIONAL_REPRESENTATION('',(#11107),#11111);+#11107 = LINE('',#11108,#11109);+#11108 = CARTESIAN_POINT('',(0.356904611713,0.));+#11109 = VECTOR('',#11110,1.);+#11110 = DIRECTION('',(0.,-1.));+#11111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11112 = ORIENTED_EDGE('',*,*,#10745,.T.);+#11113 = ORIENTED_EDGE('',*,*,#11065,.F.);+#11114 = ADVANCED_FACE('',(#11115),#8532,.T.);+#11115 = FACE_BOUND('',#11116,.T.);+#11116 = EDGE_LOOP('',(#11117,#11118,#11139,#11140));+#11117 = ORIENTED_EDGE('',*,*,#8516,.F.);+#11118 = ORIENTED_EDGE('',*,*,#11119,.T.);+#11119 = EDGE_CURVE('',#8490,#10721,#11120,.T.);+#11120 = SURFACE_CURVE('',#11121,(#11125,#11132),.PCURVE_S1.);+#11121 = LINE('',#11122,#11123);+#11122 = CARTESIAN_POINT('',(0.770105965596,-0.169487856467,2.1500001));+#11123 = VECTOR('',#11124,1.);+#11124 = DIRECTION('',(-0.,-0.,-1.));+#11125 = PCURVE('',#8532,#11126);+#11126 = DEFINITIONAL_REPRESENTATION('',(#11127),#11131);+#11127 = LINE('',#11128,#11129);+#11128 = CARTESIAN_POINT('',(0.,0.));+#11129 = VECTOR('',#11130,1.);+#11130 = DIRECTION('',(0.,-1.));+#11131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11132 = PCURVE('',#8505,#11133);+#11133 = DEFINITIONAL_REPRESENTATION('',(#11134),#11138);+#11134 = LINE('',#11135,#11136);+#11135 = CARTESIAN_POINT('',(4.661513682794E-02,0.));+#11136 = VECTOR('',#11137,1.);+#11137 = DIRECTION('',(0.,-1.));+#11138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11139 = ORIENTED_EDGE('',*,*,#10720,.T.);+#11140 = ORIENTED_EDGE('',*,*,#11092,.F.);+#11141 = ADVANCED_FACE('',(#11142),#8505,.T.);+#11142 = FACE_BOUND('',#11143,.T.);+#11143 = EDGE_LOOP('',(#11144,#11145,#11146,#11147));+#11144 = ORIENTED_EDGE('',*,*,#8487,.F.);+#11145 = ORIENTED_EDGE('',*,*,#10696,.T.);+#11146 = ORIENTED_EDGE('',*,*,#10905,.T.);+#11147 = ORIENTED_EDGE('',*,*,#11119,.F.);+#11148 = ADVANCED_FACE('',(#11149),#8474,.T.);+#11149 = FACE_BOUND('',#11150,.T.);+#11150 = EDGE_LOOP('',(#11151,#11152,#11175,#11203));+#11151 = ORIENTED_EDGE('',*,*,#8460,.F.);+#11152 = ORIENTED_EDGE('',*,*,#11153,.T.);+#11153 = EDGE_CURVE('',#8434,#11154,#11156,.T.);+#11154 = VERTEX_POINT('',#11155);+#11155 = CARTESIAN_POINT('',(0.546353308822,9.562079349322E-04,2.0500001+ ));+#11156 = SURFACE_CURVE('',#11157,(#11161,#11168),.PCURVE_S1.);+#11157 = LINE('',#11158,#11159);+#11158 = CARTESIAN_POINT('',(0.546353308822,9.562079349322E-04,2.1500001+ ));+#11159 = VECTOR('',#11160,1.);+#11160 = DIRECTION('',(-0.,-0.,-1.));+#11161 = PCURVE('',#8474,#11162);+#11162 = DEFINITIONAL_REPRESENTATION('',(#11163),#11167);+#11163 = LINE('',#11164,#11165);+#11164 = CARTESIAN_POINT('',(0.,0.));+#11165 = VECTOR('',#11166,1.);+#11166 = DIRECTION('',(0.,-1.));+#11167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11168 = PCURVE('',#8449,#11169);+#11169 = DEFINITIONAL_REPRESENTATION('',(#11170),#11174);+#11170 = LINE('',#11171,#11172);+#11171 = CARTESIAN_POINT('',(0.146538866028,0.));+#11172 = VECTOR('',#11173,1.);+#11173 = DIRECTION('',(0.,-1.));+#11174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11175 = ORIENTED_EDGE('',*,*,#11176,.T.);+#11176 = EDGE_CURVE('',#11154,#11177,#11179,.T.);+#11177 = VERTEX_POINT('',#11178);+#11178 = CARTESIAN_POINT('',(0.546353308822,-0.169487856467,2.0500001));+#11179 = SURFACE_CURVE('',#11180,(#11184,#11191),.PCURVE_S1.);+#11180 = LINE('',#11181,#11182);+#11181 = CARTESIAN_POINT('',(0.546353308822,9.562079349322E-04,2.0500001+ ));+#11182 = VECTOR('',#11183,1.);+#11183 = DIRECTION('',(0.,-1.,0.));+#11184 = PCURVE('',#8474,#11185);+#11185 = DEFINITIONAL_REPRESENTATION('',(#11186),#11190);+#11186 = LINE('',#11187,#11188);+#11187 = CARTESIAN_POINT('',(0.,-0.1));+#11188 = VECTOR('',#11189,1.);+#11189 = DIRECTION('',(1.,0.));+#11190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11191 = PCURVE('',#11192,#11197);+#11192 = PLANE('',#11193);+#11193 = AXIS2_PLACEMENT_3D('',#11194,#11195,#11196);+#11194 = CARTESIAN_POINT('',(0.442126643914,-0.169487856467,2.0500001));+#11195 = DIRECTION('',(0.,0.,1.));+#11196 = DIRECTION('',(1.,0.,0.));+#11197 = DEFINITIONAL_REPRESENTATION('',(#11198),#11202);+#11198 = LINE('',#11199,#11200);+#11199 = CARTESIAN_POINT('',(0.104226664908,0.170444064402));+#11200 = VECTOR('',#11201,1.);+#11201 = DIRECTION('',(0.,-1.));+#11202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11203 = ORIENTED_EDGE('',*,*,#11204,.F.);+#11204 = EDGE_CURVE('',#8216,#11177,#11205,.T.);+#11205 = SURFACE_CURVE('',#11206,(#11210,#11217),.PCURVE_S1.);+#11206 = LINE('',#11207,#11208);+#11207 = CARTESIAN_POINT('',(0.546353308822,-0.169487856467,2.1500001));+#11208 = VECTOR('',#11209,1.);+#11209 = DIRECTION('',(-0.,-0.,-1.));+#11210 = PCURVE('',#8474,#11211);+#11211 = DEFINITIONAL_REPRESENTATION('',(#11212),#11216);+#11212 = LINE('',#11213,#11214);+#11213 = CARTESIAN_POINT('',(0.170444064402,0.));+#11214 = VECTOR('',#11215,1.);+#11215 = DIRECTION('',(0.,-1.));+#11216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11217 = PCURVE('',#8233,#11218);+#11218 = DEFINITIONAL_REPRESENTATION('',(#11219),#11223);+#11219 = LINE('',#11220,#11221);+#11220 = CARTESIAN_POINT('',(0.,0.));+#11221 = VECTOR('',#11222,1.);+#11222 = DIRECTION('',(0.,-1.));+#11223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11224 = ADVANCED_FACE('',(#11225),#11192,.T.);+#11225 = FACE_BOUND('',#11226,.F.);+#11226 = EDGE_LOOP('',(#11227,#11252,#11275,#11298,#11321,#11344,#11367,+ #11390,#11411,#11412));+#11227 = ORIENTED_EDGE('',*,*,#11228,.T.);+#11228 = EDGE_CURVE('',#11229,#11231,#11233,.T.);+#11229 = VERTEX_POINT('',#11230);+#11230 = CARTESIAN_POINT('',(0.497825756124,-0.169487856467,2.0500001));+#11231 = VERTEX_POINT('',#11232);+#11232 = CARTESIAN_POINT('',(0.497825756124,0.187416755247,2.0500001));+#11233 = SURFACE_CURVE('',#11234,(#11238,#11245),.PCURVE_S1.);+#11234 = LINE('',#11235,#11236);+#11235 = CARTESIAN_POINT('',(0.497825756124,-0.169487856467,2.0500001));+#11236 = VECTOR('',#11237,1.);+#11237 = DIRECTION('',(0.,1.,0.));+#11238 = PCURVE('',#11192,#11239);+#11239 = DEFINITIONAL_REPRESENTATION('',(#11240),#11244);+#11240 = LINE('',#11241,#11242);+#11241 = CARTESIAN_POINT('',(5.56991122098E-02,0.));+#11242 = VECTOR('',#11243,1.);+#11243 = DIRECTION('',(0.,1.));+#11244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11245 = PCURVE('',#8260,#11246);+#11246 = DEFINITIONAL_REPRESENTATION('',(#11247),#11251);+#11247 = LINE('',#11248,#11249);+#11248 = CARTESIAN_POINT('',(0.,-0.1));+#11249 = VECTOR('',#11250,1.);+#11250 = DIRECTION('',(1.,0.));+#11251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11252 = ORIENTED_EDGE('',*,*,#11253,.T.);+#11253 = EDGE_CURVE('',#11231,#11254,#11256,.T.);+#11254 = VERTEX_POINT('',#11255);+#11255 = CARTESIAN_POINT('',(0.707952449825,0.187416755247,2.0500001));+#11256 = SURFACE_CURVE('',#11257,(#11261,#11268),.PCURVE_S1.);+#11257 = LINE('',#11258,#11259);+#11258 = CARTESIAN_POINT('',(0.497825756124,0.187416755247,2.0500001));+#11259 = VECTOR('',#11260,1.);+#11260 = DIRECTION('',(1.,0.,0.));+#11261 = PCURVE('',#11192,#11262);+#11262 = DEFINITIONAL_REPRESENTATION('',(#11263),#11267);+#11263 = LINE('',#11264,#11265);+#11264 = CARTESIAN_POINT('',(5.56991122098E-02,0.356904611713));+#11265 = VECTOR('',#11266,1.);+#11266 = DIRECTION('',(1.,0.));+#11267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11268 = PCURVE('',#8287,#11269);+#11269 = DEFINITIONAL_REPRESENTATION('',(#11270),#11274);+#11270 = LINE('',#11271,#11272);+#11271 = CARTESIAN_POINT('',(0.,-0.1));+#11272 = VECTOR('',#11273,1.);+#11273 = DIRECTION('',(1.,0.));+#11274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11275 = ORIENTED_EDGE('',*,*,#11276,.T.);+#11276 = EDGE_CURVE('',#11254,#11277,#11279,.T.);+#11277 = VERTEX_POINT('',#11278);+#11278 = CARTESIAN_POINT('',(0.707952449825,0.146777918012,2.0500001));+#11279 = SURFACE_CURVE('',#11280,(#11284,#11291),.PCURVE_S1.);+#11280 = LINE('',#11281,#11282);+#11281 = CARTESIAN_POINT('',(0.707952449825,0.187416755247,2.0500001));+#11282 = VECTOR('',#11283,1.);+#11283 = DIRECTION('',(0.,-1.,0.));+#11284 = PCURVE('',#11192,#11285);+#11285 = DEFINITIONAL_REPRESENTATION('',(#11286),#11290);+#11286 = LINE('',#11287,#11288);+#11287 = CARTESIAN_POINT('',(0.265825805911,0.356904611713));+#11288 = VECTOR('',#11289,1.);+#11289 = DIRECTION('',(0.,-1.));+#11290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11291 = PCURVE('',#8314,#11292);+#11292 = DEFINITIONAL_REPRESENTATION('',(#11293),#11297);+#11293 = LINE('',#11294,#11295);+#11294 = CARTESIAN_POINT('',(0.,-0.1));+#11295 = VECTOR('',#11296,1.);+#11296 = DIRECTION('',(1.,0.));+#11297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11298 = ORIENTED_EDGE('',*,*,#11299,.T.);+#11299 = EDGE_CURVE('',#11277,#11300,#11302,.T.);+#11300 = VERTEX_POINT('',#11301);+#11301 = CARTESIAN_POINT('',(0.546353308822,0.146777918012,2.0500001));+#11302 = SURFACE_CURVE('',#11303,(#11307,#11314),.PCURVE_S1.);+#11303 = LINE('',#11304,#11305);+#11304 = CARTESIAN_POINT('',(0.707952449825,0.146777918012,2.0500001));+#11305 = VECTOR('',#11306,1.);+#11306 = DIRECTION('',(-1.,0.,0.));+#11307 = PCURVE('',#11192,#11308);+#11308 = DEFINITIONAL_REPRESENTATION('',(#11309),#11313);+#11309 = LINE('',#11310,#11311);+#11310 = CARTESIAN_POINT('',(0.265825805911,0.316265774479));+#11311 = VECTOR('',#11312,1.);+#11312 = DIRECTION('',(-1.,0.));+#11313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11314 = PCURVE('',#8341,#11315);+#11315 = DEFINITIONAL_REPRESENTATION('',(#11316),#11320);+#11316 = LINE('',#11317,#11318);+#11317 = CARTESIAN_POINT('',(0.,-0.1));+#11318 = VECTOR('',#11319,1.);+#11319 = DIRECTION('',(1.,0.));+#11320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11321 = ORIENTED_EDGE('',*,*,#11322,.T.);+#11322 = EDGE_CURVE('',#11300,#11323,#11325,.T.);+#11323 = VERTEX_POINT('',#11324);+#11324 = CARTESIAN_POINT('',(0.546353308822,4.159504516955E-02,2.0500001+ ));+#11325 = SURFACE_CURVE('',#11326,(#11330,#11337),.PCURVE_S1.);+#11326 = LINE('',#11327,#11328);+#11327 = CARTESIAN_POINT('',(0.546353308822,0.146777918012,2.0500001));+#11328 = VECTOR('',#11329,1.);+#11329 = DIRECTION('',(0.,-1.,0.));+#11330 = PCURVE('',#11192,#11331);+#11331 = DEFINITIONAL_REPRESENTATION('',(#11332),#11336);+#11332 = LINE('',#11333,#11334);+#11333 = CARTESIAN_POINT('',(0.104226664908,0.316265774479));+#11334 = VECTOR('',#11335,1.);+#11335 = DIRECTION('',(0.,-1.));+#11336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11337 = PCURVE('',#8368,#11338);+#11338 = DEFINITIONAL_REPRESENTATION('',(#11339),#11343);+#11339 = LINE('',#11340,#11341);+#11340 = CARTESIAN_POINT('',(0.,-0.1));+#11341 = VECTOR('',#11342,1.);+#11342 = DIRECTION('',(1.,0.));+#11343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11344 = ORIENTED_EDGE('',*,*,#11345,.T.);+#11345 = EDGE_CURVE('',#11323,#11346,#11348,.T.);+#11346 = VERTEX_POINT('',#11347);+#11347 = CARTESIAN_POINT('',(0.69289217485,4.159504516955E-02,2.0500001)+ );+#11348 = SURFACE_CURVE('',#11349,(#11353,#11360),.PCURVE_S1.);+#11349 = LINE('',#11350,#11351);+#11350 = CARTESIAN_POINT('',(0.546353308822,4.159504516955E-02,2.0500001+ ));+#11351 = VECTOR('',#11352,1.);+#11352 = DIRECTION('',(1.,0.,0.));+#11353 = PCURVE('',#11192,#11354);+#11354 = DEFINITIONAL_REPRESENTATION('',(#11355),#11359);+#11355 = LINE('',#11356,#11357);+#11356 = CARTESIAN_POINT('',(0.104226664908,0.211082901636));+#11357 = VECTOR('',#11358,1.);+#11358 = DIRECTION('',(1.,0.));+#11359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11360 = PCURVE('',#8395,#11361);+#11361 = DEFINITIONAL_REPRESENTATION('',(#11362),#11366);+#11362 = LINE('',#11363,#11364);+#11363 = CARTESIAN_POINT('',(0.,-0.1));+#11364 = VECTOR('',#11365,1.);+#11365 = DIRECTION('',(1.,0.));+#11366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11367 = ORIENTED_EDGE('',*,*,#11368,.T.);+#11368 = EDGE_CURVE('',#11346,#11369,#11371,.T.);+#11369 = VERTEX_POINT('',#11370);+#11370 = CARTESIAN_POINT('',(0.69289217485,9.562079349322E-04,2.0500001)+ );+#11371 = SURFACE_CURVE('',#11372,(#11376,#11383),.PCURVE_S1.);+#11372 = LINE('',#11373,#11374);+#11373 = CARTESIAN_POINT('',(0.69289217485,4.159504516955E-02,2.0500001)+ );+#11374 = VECTOR('',#11375,1.);+#11375 = DIRECTION('',(0.,-1.,0.));+#11376 = PCURVE('',#11192,#11377);+#11377 = DEFINITIONAL_REPRESENTATION('',(#11378),#11382);+#11378 = LINE('',#11379,#11380);+#11379 = CARTESIAN_POINT('',(0.250765530936,0.211082901636));+#11380 = VECTOR('',#11381,1.);+#11381 = DIRECTION('',(0.,-1.));+#11382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11383 = PCURVE('',#8422,#11384);+#11384 = DEFINITIONAL_REPRESENTATION('',(#11385),#11389);+#11385 = LINE('',#11386,#11387);+#11386 = CARTESIAN_POINT('',(0.,-0.1));+#11387 = VECTOR('',#11388,1.);+#11388 = DIRECTION('',(1.,0.));+#11389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11390 = ORIENTED_EDGE('',*,*,#11391,.T.);+#11391 = EDGE_CURVE('',#11369,#11154,#11392,.T.);+#11392 = SURFACE_CURVE('',#11393,(#11397,#11404),.PCURVE_S1.);+#11393 = LINE('',#11394,#11395);+#11394 = CARTESIAN_POINT('',(0.69289217485,9.562079349322E-04,2.0500001)+ );+#11395 = VECTOR('',#11396,1.);+#11396 = DIRECTION('',(-1.,0.,0.));+#11397 = PCURVE('',#11192,#11398);+#11398 = DEFINITIONAL_REPRESENTATION('',(#11399),#11403);+#11399 = LINE('',#11400,#11401);+#11400 = CARTESIAN_POINT('',(0.250765530936,0.170444064402));+#11401 = VECTOR('',#11402,1.);+#11402 = DIRECTION('',(-1.,0.));+#11403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11404 = PCURVE('',#8449,#11405);+#11405 = DEFINITIONAL_REPRESENTATION('',(#11406),#11410);+#11406 = LINE('',#11407,#11408);+#11407 = CARTESIAN_POINT('',(0.,-0.1));+#11408 = VECTOR('',#11409,1.);+#11409 = DIRECTION('',(1.,0.));+#11410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11411 = ORIENTED_EDGE('',*,*,#11176,.T.);+#11412 = ORIENTED_EDGE('',*,*,#11413,.T.);+#11413 = EDGE_CURVE('',#11177,#11229,#11414,.T.);+#11414 = SURFACE_CURVE('',#11415,(#11419,#11426),.PCURVE_S1.);+#11415 = LINE('',#11416,#11417);+#11416 = CARTESIAN_POINT('',(0.546353308822,-0.169487856467,2.0500001));+#11417 = VECTOR('',#11418,1.);+#11418 = DIRECTION('',(-1.,0.,0.));+#11419 = PCURVE('',#11192,#11420);+#11420 = DEFINITIONAL_REPRESENTATION('',(#11421),#11425);+#11421 = LINE('',#11422,#11423);+#11422 = CARTESIAN_POINT('',(0.104226664908,0.));+#11423 = VECTOR('',#11424,1.);+#11424 = DIRECTION('',(-1.,0.));+#11425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11426 = PCURVE('',#8233,#11427);+#11427 = DEFINITIONAL_REPRESENTATION('',(#11428),#11432);+#11428 = LINE('',#11429,#11430);+#11429 = CARTESIAN_POINT('',(0.,-0.1));+#11430 = VECTOR('',#11431,1.);+#11431 = DIRECTION('',(1.,0.));+#11432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11433 = ADVANCED_FACE('',(#11434),#8449,.T.);+#11434 = FACE_BOUND('',#11435,.T.);+#11435 = EDGE_LOOP('',(#11436,#11437,#11458,#11459));+#11436 = ORIENTED_EDGE('',*,*,#8433,.F.);+#11437 = ORIENTED_EDGE('',*,*,#11438,.T.);+#11438 = EDGE_CURVE('',#8407,#11369,#11439,.T.);+#11439 = SURFACE_CURVE('',#11440,(#11444,#11451),.PCURVE_S1.);+#11440 = LINE('',#11441,#11442);+#11441 = CARTESIAN_POINT('',(0.69289217485,9.562079349322E-04,2.1500001)+ );+#11442 = VECTOR('',#11443,1.);+#11443 = DIRECTION('',(-0.,-0.,-1.));+#11444 = PCURVE('',#8449,#11445);+#11445 = DEFINITIONAL_REPRESENTATION('',(#11446),#11450);+#11446 = LINE('',#11447,#11448);+#11447 = CARTESIAN_POINT('',(0.,0.));+#11448 = VECTOR('',#11449,1.);+#11449 = DIRECTION('',(0.,-1.));+#11450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11451 = PCURVE('',#8422,#11452);+#11452 = DEFINITIONAL_REPRESENTATION('',(#11453),#11457);+#11453 = LINE('',#11454,#11455);+#11454 = CARTESIAN_POINT('',(4.063883723462E-02,0.));+#11455 = VECTOR('',#11456,1.);+#11456 = DIRECTION('',(0.,-1.));+#11457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11458 = ORIENTED_EDGE('',*,*,#11391,.T.);+#11459 = ORIENTED_EDGE('',*,*,#11153,.F.);+#11460 = ADVANCED_FACE('',(#11461),#8422,.T.);+#11461 = FACE_BOUND('',#11462,.T.);+#11462 = EDGE_LOOP('',(#11463,#11464,#11485,#11486));+#11463 = ORIENTED_EDGE('',*,*,#8406,.F.);+#11464 = ORIENTED_EDGE('',*,*,#11465,.T.);+#11465 = EDGE_CURVE('',#8380,#11346,#11466,.T.);+#11466 = SURFACE_CURVE('',#11467,(#11471,#11478),.PCURVE_S1.);+#11467 = LINE('',#11468,#11469);+#11468 = CARTESIAN_POINT('',(0.69289217485,4.159504516955E-02,2.1500001)+ );+#11469 = VECTOR('',#11470,1.);+#11470 = DIRECTION('',(-0.,-0.,-1.));+#11471 = PCURVE('',#8422,#11472);+#11472 = DEFINITIONAL_REPRESENTATION('',(#11473),#11477);+#11473 = LINE('',#11474,#11475);+#11474 = CARTESIAN_POINT('',(0.,0.));+#11475 = VECTOR('',#11476,1.);+#11476 = DIRECTION('',(0.,-1.));+#11477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11478 = PCURVE('',#8395,#11479);+#11479 = DEFINITIONAL_REPRESENTATION('',(#11480),#11484);+#11480 = LINE('',#11481,#11482);+#11481 = CARTESIAN_POINT('',(0.146538866028,0.));+#11482 = VECTOR('',#11483,1.);+#11483 = DIRECTION('',(0.,-1.));+#11484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11485 = ORIENTED_EDGE('',*,*,#11368,.T.);+#11486 = ORIENTED_EDGE('',*,*,#11438,.F.);+#11487 = ADVANCED_FACE('',(#11488),#8395,.T.);+#11488 = FACE_BOUND('',#11489,.T.);+#11489 = EDGE_LOOP('',(#11490,#11491,#11512,#11513));+#11490 = ORIENTED_EDGE('',*,*,#8379,.F.);+#11491 = ORIENTED_EDGE('',*,*,#11492,.T.);+#11492 = EDGE_CURVE('',#8353,#11323,#11493,.T.);+#11493 = SURFACE_CURVE('',#11494,(#11498,#11505),.PCURVE_S1.);+#11494 = LINE('',#11495,#11496);+#11495 = CARTESIAN_POINT('',(0.546353308822,4.159504516955E-02,2.1500001+ ));+#11496 = VECTOR('',#11497,1.);+#11497 = DIRECTION('',(-0.,-0.,-1.));+#11498 = PCURVE('',#8395,#11499);+#11499 = DEFINITIONAL_REPRESENTATION('',(#11500),#11504);+#11500 = LINE('',#11501,#11502);+#11501 = CARTESIAN_POINT('',(0.,0.));+#11502 = VECTOR('',#11503,1.);+#11503 = DIRECTION('',(0.,-1.));+#11504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11505 = PCURVE('',#8368,#11506);+#11506 = DEFINITIONAL_REPRESENTATION('',(#11507),#11511);+#11507 = LINE('',#11508,#11509);+#11508 = CARTESIAN_POINT('',(0.105182872843,0.));+#11509 = VECTOR('',#11510,1.);+#11510 = DIRECTION('',(0.,-1.));+#11511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11512 = ORIENTED_EDGE('',*,*,#11345,.T.);+#11513 = ORIENTED_EDGE('',*,*,#11465,.F.);+#11514 = ADVANCED_FACE('',(#11515),#8368,.T.);+#11515 = FACE_BOUND('',#11516,.T.);+#11516 = EDGE_LOOP('',(#11517,#11518,#11539,#11540));+#11517 = ORIENTED_EDGE('',*,*,#8352,.F.);+#11518 = ORIENTED_EDGE('',*,*,#11519,.T.);+#11519 = EDGE_CURVE('',#8326,#11300,#11520,.T.);+#11520 = SURFACE_CURVE('',#11521,(#11525,#11532),.PCURVE_S1.);+#11521 = LINE('',#11522,#11523);+#11522 = CARTESIAN_POINT('',(0.546353308822,0.146777918012,2.1500001));+#11523 = VECTOR('',#11524,1.);+#11524 = DIRECTION('',(-0.,-0.,-1.));+#11525 = PCURVE('',#8368,#11526);+#11526 = DEFINITIONAL_REPRESENTATION('',(#11527),#11531);+#11527 = LINE('',#11528,#11529);+#11528 = CARTESIAN_POINT('',(0.,0.));+#11529 = VECTOR('',#11530,1.);+#11530 = DIRECTION('',(0.,-1.));+#11531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11532 = PCURVE('',#8341,#11533);+#11533 = DEFINITIONAL_REPRESENTATION('',(#11534),#11538);+#11534 = LINE('',#11535,#11536);+#11535 = CARTESIAN_POINT('',(0.161599141004,0.));+#11536 = VECTOR('',#11537,1.);+#11537 = DIRECTION('',(0.,-1.));+#11538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11539 = ORIENTED_EDGE('',*,*,#11322,.T.);+#11540 = ORIENTED_EDGE('',*,*,#11492,.F.);+#11541 = ADVANCED_FACE('',(#11542),#8341,.T.);+#11542 = FACE_BOUND('',#11543,.T.);+#11543 = EDGE_LOOP('',(#11544,#11545,#11566,#11567));+#11544 = ORIENTED_EDGE('',*,*,#8325,.F.);+#11545 = ORIENTED_EDGE('',*,*,#11546,.T.);+#11546 = EDGE_CURVE('',#8299,#11277,#11547,.T.);+#11547 = SURFACE_CURVE('',#11548,(#11552,#11559),.PCURVE_S1.);+#11548 = LINE('',#11549,#11550);+#11549 = CARTESIAN_POINT('',(0.707952449825,0.146777918012,2.1500001));+#11550 = VECTOR('',#11551,1.);+#11551 = DIRECTION('',(-0.,-0.,-1.));+#11552 = PCURVE('',#8341,#11553);+#11553 = DEFINITIONAL_REPRESENTATION('',(#11554),#11558);+#11554 = LINE('',#11555,#11556);+#11555 = CARTESIAN_POINT('',(0.,0.));+#11556 = VECTOR('',#11557,1.);+#11557 = DIRECTION('',(0.,-1.));+#11558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11559 = PCURVE('',#8314,#11560);+#11560 = DEFINITIONAL_REPRESENTATION('',(#11561),#11565);+#11561 = LINE('',#11562,#11563);+#11562 = CARTESIAN_POINT('',(4.063883723462E-02,0.));+#11563 = VECTOR('',#11564,1.);+#11564 = DIRECTION('',(0.,-1.));+#11565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11566 = ORIENTED_EDGE('',*,*,#11299,.T.);+#11567 = ORIENTED_EDGE('',*,*,#11519,.F.);+#11568 = ADVANCED_FACE('',(#11569),#8314,.T.);+#11569 = FACE_BOUND('',#11570,.T.);+#11570 = EDGE_LOOP('',(#11571,#11572,#11593,#11594));+#11571 = ORIENTED_EDGE('',*,*,#8298,.F.);+#11572 = ORIENTED_EDGE('',*,*,#11573,.T.);+#11573 = EDGE_CURVE('',#8272,#11254,#11574,.T.);+#11574 = SURFACE_CURVE('',#11575,(#11579,#11586),.PCURVE_S1.);+#11575 = LINE('',#11576,#11577);+#11576 = CARTESIAN_POINT('',(0.707952449825,0.187416755247,2.1500001));+#11577 = VECTOR('',#11578,1.);+#11578 = DIRECTION('',(-0.,-0.,-1.));+#11579 = PCURVE('',#8314,#11580);+#11580 = DEFINITIONAL_REPRESENTATION('',(#11581),#11585);+#11581 = LINE('',#11582,#11583);+#11582 = CARTESIAN_POINT('',(0.,0.));+#11583 = VECTOR('',#11584,1.);+#11584 = DIRECTION('',(0.,-1.));+#11585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11586 = PCURVE('',#8287,#11587);+#11587 = DEFINITIONAL_REPRESENTATION('',(#11588),#11592);+#11588 = LINE('',#11589,#11590);+#11589 = CARTESIAN_POINT('',(0.210126693701,0.));+#11590 = VECTOR('',#11591,1.);+#11591 = DIRECTION('',(0.,-1.));+#11592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11593 = ORIENTED_EDGE('',*,*,#11276,.T.);+#11594 = ORIENTED_EDGE('',*,*,#11546,.F.);+#11595 = ADVANCED_FACE('',(#11596),#8287,.T.);+#11596 = FACE_BOUND('',#11597,.T.);+#11597 = EDGE_LOOP('',(#11598,#11599,#11620,#11621));+#11598 = ORIENTED_EDGE('',*,*,#8271,.F.);+#11599 = ORIENTED_EDGE('',*,*,#11600,.T.);+#11600 = EDGE_CURVE('',#8245,#11231,#11601,.T.);+#11601 = SURFACE_CURVE('',#11602,(#11606,#11613),.PCURVE_S1.);+#11602 = LINE('',#11603,#11604);+#11603 = CARTESIAN_POINT('',(0.497825756124,0.187416755247,2.1500001));+#11604 = VECTOR('',#11605,1.);+#11605 = DIRECTION('',(-0.,-0.,-1.));+#11606 = PCURVE('',#8287,#11607);+#11607 = DEFINITIONAL_REPRESENTATION('',(#11608),#11612);+#11608 = LINE('',#11609,#11610);+#11609 = CARTESIAN_POINT('',(0.,0.));+#11610 = VECTOR('',#11611,1.);+#11611 = DIRECTION('',(0.,-1.));+#11612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11613 = PCURVE('',#8260,#11614);+#11614 = DEFINITIONAL_REPRESENTATION('',(#11615),#11619);+#11615 = LINE('',#11616,#11617);+#11616 = CARTESIAN_POINT('',(0.356904611713,0.));+#11617 = VECTOR('',#11618,1.);+#11618 = DIRECTION('',(0.,-1.));+#11619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11620 = ORIENTED_EDGE('',*,*,#11253,.T.);+#11621 = ORIENTED_EDGE('',*,*,#11573,.F.);+#11622 = ADVANCED_FACE('',(#11623),#8260,.T.);+#11623 = FACE_BOUND('',#11624,.T.);+#11624 = EDGE_LOOP('',(#11625,#11626,#11647,#11648));+#11625 = ORIENTED_EDGE('',*,*,#8244,.F.);+#11626 = ORIENTED_EDGE('',*,*,#11627,.T.);+#11627 = EDGE_CURVE('',#8218,#11229,#11628,.T.);+#11628 = SURFACE_CURVE('',#11629,(#11633,#11640),.PCURVE_S1.);+#11629 = LINE('',#11630,#11631);+#11630 = CARTESIAN_POINT('',(0.497825756124,-0.169487856467,2.1500001));+#11631 = VECTOR('',#11632,1.);+#11632 = DIRECTION('',(-0.,-0.,-1.));+#11633 = PCURVE('',#8260,#11634);+#11634 = DEFINITIONAL_REPRESENTATION('',(#11635),#11639);+#11635 = LINE('',#11636,#11637);+#11636 = CARTESIAN_POINT('',(0.,0.));+#11637 = VECTOR('',#11638,1.);+#11638 = DIRECTION('',(0.,-1.));+#11639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11640 = PCURVE('',#8233,#11641);+#11641 = DEFINITIONAL_REPRESENTATION('',(#11642),#11646);+#11642 = LINE('',#11643,#11644);+#11643 = CARTESIAN_POINT('',(4.852755269781E-02,0.));+#11644 = VECTOR('',#11645,1.);+#11645 = DIRECTION('',(0.,-1.));+#11646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11647 = ORIENTED_EDGE('',*,*,#11228,.T.);+#11648 = ORIENTED_EDGE('',*,*,#11600,.F.);+#11649 = ADVANCED_FACE('',(#11650),#8233,.T.);+#11650 = FACE_BOUND('',#11651,.T.);+#11651 = EDGE_LOOP('',(#11652,#11653,#11654,#11655));+#11652 = ORIENTED_EDGE('',*,*,#8215,.F.);+#11653 = ORIENTED_EDGE('',*,*,#11204,.T.);+#11654 = ORIENTED_EDGE('',*,*,#11413,.T.);+#11655 = ORIENTED_EDGE('',*,*,#11627,.F.);+#11656 = ADVANCED_FACE('',(#11657),#8197,.T.);+#11657 = FACE_BOUND('',#11658,.T.);+#11658 = EDGE_LOOP('',(#11659,#11660,#11683,#11711));+#11659 = ORIENTED_EDGE('',*,*,#8179,.T.);+#11660 = ORIENTED_EDGE('',*,*,#11661,.T.);+#11661 = EDGE_CURVE('',#8144,#11662,#11664,.T.);+#11662 = VERTEX_POINT('',#11663);+#11663 = CARTESIAN_POINT('',(0.352960253982,-3.585779755996E-03,+ 2.0500001));+#11664 = SURFACE_CURVE('',#11665,(#11669,#11676),.PCURVE_S1.);+#11665 = LINE('',#11666,#11667);+#11666 = CARTESIAN_POINT('',(0.352960253982,-3.585779755996E-03,+ 2.1500001));+#11667 = VECTOR('',#11668,1.);+#11668 = DIRECTION('',(-0.,-0.,-1.));+#11669 = PCURVE('',#8197,#11670);+#11670 = DEFINITIONAL_REPRESENTATION('',(#11671),#11675);+#11671 = LINE('',#11672,#11673);+#11672 = CARTESIAN_POINT('',(0.,0.));+#11673 = VECTOR('',#11674,1.);+#11674 = DIRECTION('',(0.,-1.));+#11675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11676 = PCURVE('',#8163,#11677);+#11677 = DEFINITIONAL_REPRESENTATION('',(#11678),#11682);+#11678 = LINE('',#11679,#11680);+#11679 = CARTESIAN_POINT('',(1.,0.));+#11680 = VECTOR('',#11681,1.);+#11681 = DIRECTION('',(0.,-1.));+#11682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11683 = ORIENTED_EDGE('',*,*,#11684,.T.);+#11684 = EDGE_CURVE('',#11662,#11685,#11687,.T.);+#11685 = VERTEX_POINT('',#11686);+#11686 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,+ 2.0500001));+#11687 = SURFACE_CURVE('',#11688,(#11692,#11699),.PCURVE_S1.);+#11688 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11689,#11690,#11691),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11689 = CARTESIAN_POINT('',(0.352960253982,-3.585779755996E-03,+ 2.0500001));+#11690 = CARTESIAN_POINT('',(0.339573342893,-1.912415869864E-02,+ 2.0500001));+#11691 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,+ 2.0500001));+#11692 = PCURVE('',#8197,#11693);+#11693 = DEFINITIONAL_REPRESENTATION('',(#11694),#11698);+#11694 = LINE('',#11695,#11696);+#11695 = CARTESIAN_POINT('',(0.,-0.1));+#11696 = VECTOR('',#11697,1.);+#11697 = DIRECTION('',(1.,0.));+#11698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11699 = PCURVE('',#11700,#11705);+#11700 = PLANE('',#11701);+#11701 = AXIS2_PLACEMENT_3D('',#11702,#11703,#11704);+#11702 = CARTESIAN_POINT('',(0.147375547971,-0.169487856467,2.0500001));+#11703 = DIRECTION('',(0.,0.,1.));+#11704 = DIRECTION('',(1.,0.,0.));+#11705 = DEFINITIONAL_REPRESENTATION('',(#11706),#11710);+#11706 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11707,#11708,#11709),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11707 = CARTESIAN_POINT('',(0.20558470601,0.165902076711));+#11708 = CARTESIAN_POINT('',(0.192197794921,0.150363697768));+#11709 = CARTESIAN_POINT('',(0.166738758654,0.122872719639));+#11710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11711 = ORIENTED_EDGE('',*,*,#11712,.F.);+#11712 = EDGE_CURVE('',#7478,#11685,#11713,.T.);+#11713 = SURFACE_CURVE('',#11714,(#11718,#11725),.PCURVE_S1.);+#11714 = LINE('',#11715,#11716);+#11715 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,+ 2.1500001));+#11716 = VECTOR('',#11717,1.);+#11717 = DIRECTION('',(-0.,-0.,-1.));+#11718 = PCURVE('',#8197,#11719);+#11719 = DEFINITIONAL_REPRESENTATION('',(#11720),#11724);+#11720 = LINE('',#11721,#11722);+#11721 = CARTESIAN_POINT('',(1.,0.));+#11722 = VECTOR('',#11723,1.);+#11723 = DIRECTION('',(0.,-1.));+#11724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11725 = PCURVE('',#7497,#11726);+#11726 = DEFINITIONAL_REPRESENTATION('',(#11727),#11731);+#11727 = LINE('',#11728,#11729);+#11728 = CARTESIAN_POINT('',(0.,0.));+#11729 = VECTOR('',#11730,1.);+#11730 = DIRECTION('',(0.,-1.));+#11731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11732 = ADVANCED_FACE('',(#11733),#11700,.T.);+#11733 = FACE_BOUND('',#11734,.F.);+#11734 = EDGE_LOOP('',(#11735,#11760,#11783,#11806,#11829,#11852,#11875,+ #11898,#11921,#11944,#11967,#11990,#12013,#12036,#12059,#12082,+ #12105,#12128,#12151,#12172,#12173));+#11735 = ORIENTED_EDGE('',*,*,#11736,.T.);+#11736 = EDGE_CURVE('',#11737,#11739,#11741,.T.);+#11737 = VERTEX_POINT('',#11738);+#11738 = CARTESIAN_POINT('',(0.236541937904,-0.128849019232,2.0500001));+#11739 = VERTEX_POINT('',#11740);+#11740 = CARTESIAN_POINT('',(0.400531598745,-0.128849019232,2.0500001));+#11741 = SURFACE_CURVE('',#11742,(#11746,#11753),.PCURVE_S1.);+#11742 = LINE('',#11743,#11744);+#11743 = CARTESIAN_POINT('',(0.236541937904,-0.128849019232,2.0500001));+#11744 = VECTOR('',#11745,1.);+#11745 = DIRECTION('',(1.,0.,0.));+#11746 = PCURVE('',#11700,#11747);+#11747 = DEFINITIONAL_REPRESENTATION('',(#11748),#11752);+#11748 = LINE('',#11749,#11750);+#11749 = CARTESIAN_POINT('',(8.916638993243E-02,4.063883723462E-02));+#11750 = VECTOR('',#11751,1.);+#11751 = DIRECTION('',(1.,0.));+#11752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11753 = PCURVE('',#7529,#11754);+#11754 = DEFINITIONAL_REPRESENTATION('',(#11755),#11759);+#11755 = LINE('',#11756,#11757);+#11756 = CARTESIAN_POINT('',(0.,-0.1));+#11757 = VECTOR('',#11758,1.);+#11758 = DIRECTION('',(1.,0.));+#11759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11760 = ORIENTED_EDGE('',*,*,#11761,.T.);+#11761 = EDGE_CURVE('',#11739,#11762,#11764,.T.);+#11762 = VERTEX_POINT('',#11763);+#11763 = CARTESIAN_POINT('',(0.400531598745,-0.169487856467,2.0500001));+#11764 = SURFACE_CURVE('',#11765,(#11769,#11776),.PCURVE_S1.);+#11765 = LINE('',#11766,#11767);+#11766 = CARTESIAN_POINT('',(0.400531598745,-0.128849019232,2.0500001));+#11767 = VECTOR('',#11768,1.);+#11768 = DIRECTION('',(0.,-1.,0.));+#11769 = PCURVE('',#11700,#11770);+#11770 = DEFINITIONAL_REPRESENTATION('',(#11771),#11775);+#11771 = LINE('',#11772,#11773);+#11772 = CARTESIAN_POINT('',(0.253156050773,4.063883723462E-02));+#11773 = VECTOR('',#11774,1.);+#11774 = DIRECTION('',(0.,-1.));+#11775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11776 = PCURVE('',#7556,#11777);+#11777 = DEFINITIONAL_REPRESENTATION('',(#11778),#11782);+#11778 = LINE('',#11779,#11780);+#11779 = CARTESIAN_POINT('',(0.,-0.1));+#11780 = VECTOR('',#11781,1.);+#11781 = DIRECTION('',(1.,0.));+#11782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11783 = ORIENTED_EDGE('',*,*,#11784,.T.);+#11784 = EDGE_CURVE('',#11762,#11785,#11787,.T.);+#11785 = VERTEX_POINT('',#11786);+#11786 = CARTESIAN_POINT('',(0.183711449499,-0.169487856467,2.0500001));+#11787 = SURFACE_CURVE('',#11788,(#11792,#11799),.PCURVE_S1.);+#11788 = LINE('',#11789,#11790);+#11789 = CARTESIAN_POINT('',(0.400531598745,-0.169487856467,2.0500001));+#11790 = VECTOR('',#11791,1.);+#11791 = DIRECTION('',(-1.,0.,0.));+#11792 = PCURVE('',#11700,#11793);+#11793 = DEFINITIONAL_REPRESENTATION('',(#11794),#11798);+#11794 = LINE('',#11795,#11796);+#11795 = CARTESIAN_POINT('',(0.253156050773,0.));+#11796 = VECTOR('',#11797,1.);+#11797 = DIRECTION('',(-1.,0.));+#11798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11799 = PCURVE('',#7583,#11800);+#11800 = DEFINITIONAL_REPRESENTATION('',(#11801),#11805);+#11801 = LINE('',#11802,#11803);+#11802 = CARTESIAN_POINT('',(0.,-0.1));+#11803 = VECTOR('',#11804,1.);+#11804 = DIRECTION('',(1.,0.));+#11805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11806 = ORIENTED_EDGE('',*,*,#11807,.T.);+#11807 = EDGE_CURVE('',#11785,#11808,#11810,.T.);+#11808 = VERTEX_POINT('',#11809);+#11809 = CARTESIAN_POINT('',(0.183711449499,-0.128849019232,2.0500001));+#11810 = SURFACE_CURVE('',#11811,(#11815,#11822),.PCURVE_S1.);+#11811 = LINE('',#11812,#11813);+#11812 = CARTESIAN_POINT('',(0.183711449499,-0.169487856467,2.0500001));+#11813 = VECTOR('',#11814,1.);+#11814 = DIRECTION('',(0.,1.,0.));+#11815 = PCURVE('',#11700,#11816);+#11816 = DEFINITIONAL_REPRESENTATION('',(#11817),#11821);+#11817 = LINE('',#11818,#11819);+#11818 = CARTESIAN_POINT('',(3.633590152742E-02,0.));+#11819 = VECTOR('',#11820,1.);+#11820 = DIRECTION('',(0.,1.));+#11821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11822 = PCURVE('',#7610,#11823);+#11823 = DEFINITIONAL_REPRESENTATION('',(#11824),#11828);+#11824 = LINE('',#11825,#11826);+#11825 = CARTESIAN_POINT('',(0.,-0.1));+#11826 = VECTOR('',#11827,1.);+#11827 = DIRECTION('',(1.,0.));+#11828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11829 = ORIENTED_EDGE('',*,*,#11830,.T.);+#11830 = EDGE_CURVE('',#11808,#11831,#11833,.T.);+#11831 = VERTEX_POINT('',#11832);+#11832 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.0500001+ ));+#11833 = SURFACE_CURVE('',#11834,(#11838,#11845),.PCURVE_S1.);+#11834 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11835,#11836,#11837),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11835 = CARTESIAN_POINT('',(0.183711449499,-0.128849019232,2.0500001));+#11836 = CARTESIAN_POINT('',(0.228414170457,-8.17557784367E-02,2.0500001+ ));+#11837 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.0500001+ ));+#11838 = PCURVE('',#11700,#11839);+#11839 = DEFINITIONAL_REPRESENTATION('',(#11840),#11844);+#11840 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11841,#11842,#11843),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11841 = CARTESIAN_POINT('',(3.633590152742E-02,4.063883723462E-02));+#11842 = CARTESIAN_POINT('',(8.10386224855E-02,8.773207803003E-02));+#11843 = CARTESIAN_POINT('',(0.114505900208,0.123828927574));+#11844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11845 = PCURVE('',#7641,#11846);+#11846 = DEFINITIONAL_REPRESENTATION('',(#11847),#11851);+#11847 = LINE('',#11848,#11849);+#11848 = CARTESIAN_POINT('',(0.,-0.1));+#11849 = VECTOR('',#11850,1.);+#11850 = DIRECTION('',(1.,0.));+#11851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11852 = ORIENTED_EDGE('',*,*,#11853,.T.);+#11853 = EDGE_CURVE('',#11831,#11854,#11856,.T.);+#11854 = VERTEX_POINT('',#11855);+#11855 = CARTESIAN_POINT('',(0.30801848104,5.259143642127E-03,2.0500001)+ );+#11856 = SURFACE_CURVE('',#11857,(#11861,#11868),.PCURVE_S1.);+#11857 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11858,#11859,#11860),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11858 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.0500001+ ));+#11859 = CARTESIAN_POINT('',(0.295348725902,-9.562079349322E-03,+ 2.0500001));+#11860 = CARTESIAN_POINT('',(0.30801848104,5.259143642127E-03,2.0500001)+ );+#11861 = PCURVE('',#11700,#11862);+#11862 = DEFINITIONAL_REPRESENTATION('',(#11863),#11867);+#11863 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11864,#11865,#11866),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11864 = CARTESIAN_POINT('',(0.114505900208,0.123828927574));+#11865 = CARTESIAN_POINT('',(0.147973177931,0.159925777117));+#11866 = CARTESIAN_POINT('',(0.160642933069,0.174747000109));+#11867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11868 = PCURVE('',#7677,#11869);+#11869 = DEFINITIONAL_REPRESENTATION('',(#11870),#11874);+#11870 = LINE('',#11871,#11872);+#11871 = CARTESIAN_POINT('',(0.,-0.1));+#11872 = VECTOR('',#11873,1.);+#11873 = DIRECTION('',(1.,0.));+#11874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11875 = ORIENTED_EDGE('',*,*,#11876,.T.);+#11876 = EDGE_CURVE('',#11854,#11877,#11879,.T.);+#11877 = VERTEX_POINT('',#11878);+#11878 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.0500001)+ );+#11879 = SURFACE_CURVE('',#11880,(#11884,#11891),.PCURVE_S1.);+#11880 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11881,#11882,#11883),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11881 = CARTESIAN_POINT('',(0.30801848104,5.259143642127E-03,2.0500001)+ );+#11882 = CARTESIAN_POINT('',(0.331923679413,3.442348565756E-02,2.0500001+ ));+#11883 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.0500001)+ );+#11884 = PCURVE('',#11700,#11885);+#11885 = DEFINITIONAL_REPRESENTATION('',(#11886),#11890);+#11886 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11887,#11888,#11889),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11887 = CARTESIAN_POINT('',(0.160642933069,0.174747000109));+#11888 = CARTESIAN_POINT('',(0.184548131442,0.203911342124));+#11889 = CARTESIAN_POINT('',(0.192914950873,0.221959766896));+#11890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11891 = PCURVE('',#7713,#11892);+#11892 = DEFINITIONAL_REPRESENTATION('',(#11893),#11897);+#11893 = LINE('',#11894,#11895);+#11894 = CARTESIAN_POINT('',(0.,-0.1));+#11895 = VECTOR('',#11896,1.);+#11896 = DIRECTION('',(1.,0.));+#11897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11898 = ORIENTED_EDGE('',*,*,#11899,.T.);+#11899 = EDGE_CURVE('',#11877,#11900,#11902,.T.);+#11900 = VERTEX_POINT('',#11901);+#11901 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.0500001+ ));+#11902 = SURFACE_CURVE('',#11903,(#11907,#11914),.PCURVE_S1.);+#11903 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11904,#11905,#11906),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11904 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.0500001)+ );+#11905 = CARTESIAN_POINT('',(0.348657318275,7.052033520125E-02,2.0500001+ ));+#11906 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.0500001+ ));+#11907 = PCURVE('',#11700,#11908);+#11908 = DEFINITIONAL_REPRESENTATION('',(#11909),#11913);+#11909 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11910,#11911,#11912),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11910 = CARTESIAN_POINT('',(0.192914950873,0.221959766896));+#11911 = CARTESIAN_POINT('',(0.201281770303,0.240008191668));+#11912 = CARTESIAN_POINT('',(0.201281770303,0.258893298383));+#11913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11914 = PCURVE('',#7749,#11915);+#11915 = DEFINITIONAL_REPRESENTATION('',(#11916),#11920);+#11916 = LINE('',#11917,#11918);+#11917 = CARTESIAN_POINT('',(0.,-0.1));+#11918 = VECTOR('',#11919,1.);+#11919 = DIRECTION('',(1.,0.));+#11920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11921 = ORIENTED_EDGE('',*,*,#11922,.T.);+#11922 = EDGE_CURVE('',#11900,#11923,#11925,.T.);+#11923 = VERTEX_POINT('',#11924);+#11924 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.0500001));+#11925 = SURFACE_CURVE('',#11926,(#11930,#11937),.PCURVE_S1.);+#11926 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11927,#11928,#11929),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11927 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.0500001+ ));+#11928 = CARTESIAN_POINT('',(0.348657318275,0.119286939883,2.0500001));+#11929 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.0500001));+#11930 = PCURVE('',#11700,#11931);+#11931 = DEFINITIONAL_REPRESENTATION('',(#11932),#11936);+#11932 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11933,#11934,#11935),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11933 = CARTESIAN_POINT('',(0.201281770303,0.258893298383));+#11934 = CARTESIAN_POINT('',(0.201281770303,0.28877479635));+#11935 = CARTESIAN_POINT('',(0.183711449499,0.305747487195));+#11936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11937 = PCURVE('',#7791,#11938);+#11938 = DEFINITIONAL_REPRESENTATION('',(#11939),#11943);+#11939 = LINE('',#11940,#11941);+#11940 = CARTESIAN_POINT('',(0.,-0.1));+#11941 = VECTOR('',#11942,1.);+#11942 = DIRECTION('',(1.,0.));+#11943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11944 = ORIENTED_EDGE('',*,*,#11945,.T.);+#11945 = EDGE_CURVE('',#11923,#11946,#11948,.T.);+#11946 = VERTEX_POINT('',#11947);+#11947 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.0500001));+#11948 = SURFACE_CURVE('',#11949,(#11953,#11960),.PCURVE_S1.);+#11949 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11950,#11951,#11952),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11950 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.0500001));+#11951 = CARTESIAN_POINT('',(0.313516676666,0.153232321573,2.0500001));+#11952 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.0500001));+#11953 = PCURVE('',#11700,#11954);+#11954 = DEFINITIONAL_REPRESENTATION('',(#11955),#11959);+#11955 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11956,#11957,#11958),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11956 = CARTESIAN_POINT('',(0.183711449499,0.305747487195));+#11957 = CARTESIAN_POINT('',(0.166141128694,0.32272017804));+#11958 = CARTESIAN_POINT('',(0.135542474777,0.32272017804));+#11959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11960 = PCURVE('',#7830,#11961);+#11961 = DEFINITIONAL_REPRESENTATION('',(#11962),#11966);+#11962 = LINE('',#11963,#11964);+#11963 = CARTESIAN_POINT('',(0.,-0.1));+#11964 = VECTOR('',#11965,1.);+#11965 = DIRECTION('',(1.,0.));+#11966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11967 = ORIENTED_EDGE('',*,*,#11968,.T.);+#11968 = EDGE_CURVE('',#11946,#11969,#11971,.T.);+#11969 = VERTEX_POINT('',#11970);+#11970 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.0500001));+#11971 = SURFACE_CURVE('',#11972,(#11976,#11983),.PCURVE_S1.);+#11972 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11973,#11974,#11975),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11973 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.0500001));+#11974 = CARTESIAN_POINT('',(0.261164292228,0.153232321573,2.0500001));+#11975 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.0500001));+#11976 = PCURVE('',#11700,#11977);+#11977 = DEFINITIONAL_REPRESENTATION('',(#11978),#11982);+#11978 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11979,#11980,#11981),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11979 = CARTESIAN_POINT('',(0.135542474777,0.32272017804));+#11980 = CARTESIAN_POINT('',(0.113788744257,0.32272017804));+#11981 = CARTESIAN_POINT('',(8.988354588363E-02,0.314831462576));+#11982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11983 = PCURVE('',#7866,#11984);+#11984 = DEFINITIONAL_REPRESENTATION('',(#11985),#11989);+#11985 = LINE('',#11986,#11987);+#11986 = CARTESIAN_POINT('',(0.,-0.1));+#11987 = VECTOR('',#11988,1.);+#11988 = DIRECTION('',(1.,0.));+#11989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11990 = ORIENTED_EDGE('',*,*,#11991,.T.);+#11991 = EDGE_CURVE('',#11969,#11992,#11994,.T.);+#11992 = VERTEX_POINT('',#11993);+#11993 = CARTESIAN_POINT('',(0.186580073304,0.121438407736,2.0500001));+#11994 = SURFACE_CURVE('',#11995,(#11999,#12006),.PCURVE_S1.);+#11995 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11996,#11997,#11998),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11996 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.0500001));+#11997 = CARTESIAN_POINT('',(0.213353895482,0.137454890647,2.0500001));+#11998 = CARTESIAN_POINT('',(0.186580073304,0.121438407736,2.0500001));+#11999 = PCURVE('',#11700,#12000);+#12000 = DEFINITIONAL_REPRESENTATION('',(#12001),#12005);+#12001 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12002,#12003,#12004),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12002 = CARTESIAN_POINT('',(8.988354588363E-02,0.314831462576));+#12003 = CARTESIAN_POINT('',(6.597834751032E-02,0.306942747113));+#12004 = CARTESIAN_POINT('',(3.920452533222E-02,0.290926264203));+#12005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12006 = PCURVE('',#7902,#12007);+#12007 = DEFINITIONAL_REPRESENTATION('',(#12008),#12012);+#12008 = LINE('',#12009,#12010);+#12009 = CARTESIAN_POINT('',(0.,-0.1));+#12010 = VECTOR('',#12011,1.);+#12011 = DIRECTION('',(1.,0.));+#12012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12013 = ORIENTED_EDGE('',*,*,#12014,.T.);+#12014 = EDGE_CURVE('',#11992,#12015,#12017,.T.);+#12015 = VERTEX_POINT('',#12016);+#12016 = CARTESIAN_POINT('',(0.186580073304,0.170205012418,2.0500001));+#12017 = SURFACE_CURVE('',#12018,(#12022,#12029),.PCURVE_S1.);+#12018 = LINE('',#12019,#12020);+#12019 = CARTESIAN_POINT('',(0.186580073304,0.121438407736,2.0500001));+#12020 = VECTOR('',#12021,1.);+#12021 = DIRECTION('',(0.,1.,0.));+#12022 = PCURVE('',#11700,#12023);+#12023 = DEFINITIONAL_REPRESENTATION('',(#12024),#12028);+#12024 = LINE('',#12025,#12026);+#12025 = CARTESIAN_POINT('',(3.920452533222E-02,0.290926264203));+#12026 = VECTOR('',#12027,1.);+#12027 = DIRECTION('',(0.,1.));+#12028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12029 = PCURVE('',#7934,#12030);+#12030 = DEFINITIONAL_REPRESENTATION('',(#12031),#12035);+#12031 = LINE('',#12032,#12033);+#12032 = CARTESIAN_POINT('',(0.,-0.1));+#12033 = VECTOR('',#12034,1.);+#12034 = DIRECTION('',(1.,0.));+#12035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12036 = ORIENTED_EDGE('',*,*,#12037,.T.);+#12037 = EDGE_CURVE('',#12015,#12038,#12040,.T.);+#12038 = VERTEX_POINT('',#12039);+#12039 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.0500001));+#12040 = SURFACE_CURVE('',#12041,(#12045,#12052),.PCURVE_S1.);+#12041 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12042,#12043,#12044),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12042 = CARTESIAN_POINT('',(0.186580073304,0.170205012418,2.0500001));+#12043 = CARTESIAN_POINT('',(0.211202427628,0.181918559621,2.0500001));+#12044 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.0500001));+#12045 = PCURVE('',#11700,#12046);+#12046 = DEFINITIONAL_REPRESENTATION('',(#12047),#12051);+#12047 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12048,#12049,#12050),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12048 = CARTESIAN_POINT('',(3.920452533222E-02,0.339692868885));+#12049 = CARTESIAN_POINT('',(6.382687965672E-02,0.351406416088));+#12050 = CARTESIAN_POINT('',(8.761255203816E-02,0.357382715681));+#12051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12052 = PCURVE('',#7965,#12053);+#12053 = DEFINITIONAL_REPRESENTATION('',(#12054),#12058);+#12054 = LINE('',#12055,#12056);+#12055 = CARTESIAN_POINT('',(0.,-0.1));+#12056 = VECTOR('',#12057,1.);+#12057 = DIRECTION('',(1.,0.));+#12058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12059 = ORIENTED_EDGE('',*,*,#12060,.T.);+#12060 = EDGE_CURVE('',#12038,#12061,#12063,.T.);+#12061 = VERTEX_POINT('',#12062);+#12062 = CARTESIAN_POINT('',(0.281961814813,0.193871158808,2.0500001));+#12063 = SURFACE_CURVE('',#12064,(#12068,#12075),.PCURVE_S1.);+#12064 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12065,#12066,#12067),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12065 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.0500001));+#12066 = CARTESIAN_POINT('',(0.258773772391,0.193871158808,2.0500001));+#12067 = CARTESIAN_POINT('',(0.281961814813,0.193871158808,2.0500001));+#12068 = PCURVE('',#11700,#12069);+#12069 = DEFINITIONAL_REPRESENTATION('',(#12070),#12074);+#12070 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12071,#12072,#12073),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12071 = CARTESIAN_POINT('',(8.761255203816E-02,0.357382715681));+#12072 = CARTESIAN_POINT('',(0.11139822442,0.363359015274));+#12073 = CARTESIAN_POINT('',(0.134586266842,0.363359015274));+#12074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12075 = PCURVE('',#8001,#12076);+#12076 = DEFINITIONAL_REPRESENTATION('',(#12077),#12081);+#12077 = LINE('',#12078,#12079);+#12078 = CARTESIAN_POINT('',(0.,-0.1));+#12079 = VECTOR('',#12080,1.);+#12080 = DIRECTION('',(1.,0.));+#12081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12082 = ORIENTED_EDGE('',*,*,#12083,.T.);+#12083 = EDGE_CURVE('',#12061,#12084,#12086,.T.);+#12084 = VERTEX_POINT('',#12085);+#12085 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.0500001));+#12086 = SURFACE_CURVE('',#12087,(#12091,#12098),.PCURVE_S1.);+#12087 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12088,#12089,#12090),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12088 = CARTESIAN_POINT('',(0.281961814813,0.193871158808,2.0500001));+#12089 = CARTESIAN_POINT('',(0.334314199251,0.193871158808,2.0500001));+#12090 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.0500001));+#12091 = PCURVE('',#11700,#12092);+#12092 = DEFINITIONAL_REPRESENTATION('',(#12093),#12097);+#12093 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12094,#12095,#12096),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12094 = CARTESIAN_POINT('',(0.134586266842,0.363359015274));+#12095 = CARTESIAN_POINT('',(0.186938651279,0.363359015274));+#12096 = CARTESIAN_POINT('',(0.218852091108,0.335509459169));+#12097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12098 = PCURVE('',#8043,#12099);+#12099 = DEFINITIONAL_REPRESENTATION('',(#12100),#12104);+#12100 = LINE('',#12101,#12102);+#12101 = CARTESIAN_POINT('',(0.,-0.1));+#12102 = VECTOR('',#12103,1.);+#12103 = DIRECTION('',(1.,0.));+#12104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12105 = ORIENTED_EDGE('',*,*,#12106,.T.);+#12106 = EDGE_CURVE('',#12084,#12107,#12109,.T.);+#12107 = VERTEX_POINT('',#12108);+#12108 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.0500001+ ));+#12109 = SURFACE_CURVE('',#12110,(#12114,#12121),.PCURVE_S1.);+#12110 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12111,#12112,#12113),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12111 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.0500001));+#12112 = CARTESIAN_POINT('',(0.398141078907,0.138172046598,2.0500001));+#12113 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.0500001+ ));+#12114 = PCURVE('',#11700,#12115);+#12115 = DEFINITIONAL_REPRESENTATION('',(#12116),#12120);+#12116 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12117,#12118,#12119),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12117 = CARTESIAN_POINT('',(0.218852091108,0.335509459169));+#12118 = CARTESIAN_POINT('',(0.250765530936,0.307659903064));+#12119 = CARTESIAN_POINT('',(0.250765530936,0.262479078139));+#12120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12121 = PCURVE('',#8088,#12122);+#12122 = DEFINITIONAL_REPRESENTATION('',(#12123),#12127);+#12123 = LINE('',#12124,#12125);+#12124 = CARTESIAN_POINT('',(0.,-0.1));+#12125 = VECTOR('',#12126,1.);+#12126 = DIRECTION('',(1.,0.));+#12127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12128 = ORIENTED_EDGE('',*,*,#12129,.T.);+#12129 = EDGE_CURVE('',#12107,#12130,#12132,.T.);+#12130 = VERTEX_POINT('',#12131);+#12131 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.0500001+ ));+#12132 = SURFACE_CURVE('',#12133,(#12137,#12144),.PCURVE_S1.);+#12133 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12134,#12135,#12136),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12134 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.0500001+ ));+#12135 = CARTESIAN_POINT('',(0.398141078907,7.004223123378E-02,2.0500001+ ));+#12136 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.0500001+ ));+#12137 = PCURVE('',#11700,#12138);+#12138 = DEFINITIONAL_REPRESENTATION('',(#12139),#12143);+#12139 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12140,#12141,#12142),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12140 = CARTESIAN_POINT('',(0.250765530936,0.262479078139));+#12141 = CARTESIAN_POINT('',(0.250765530936,0.239530087701));+#12142 = CARTESIAN_POINT('',(0.24012771766,0.216581097262));+#12143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12144 = PCURVE('',#8127,#12145);+#12145 = DEFINITIONAL_REPRESENTATION('',(#12146),#12150);+#12146 = LINE('',#12147,#12148);+#12147 = CARTESIAN_POINT('',(0.,-0.1));+#12148 = VECTOR('',#12149,1.);+#12149 = DIRECTION('',(1.,0.));+#12150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12151 = ORIENTED_EDGE('',*,*,#12152,.T.);+#12152 = EDGE_CURVE('',#12130,#11662,#12153,.T.);+#12153 = SURFACE_CURVE('',#12154,(#12158,#12165),.PCURVE_S1.);+#12154 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12155,#12156,#12157),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12155 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.0500001+ ));+#12156 = CARTESIAN_POINT('',(0.376865452355,2.414425035704E-02,2.0500001+ ));+#12157 = CARTESIAN_POINT('',(0.352960253982,-3.585779755996E-03,+ 2.0500001));+#12158 = PCURVE('',#11700,#12159);+#12159 = DEFINITIONAL_REPRESENTATION('',(#12160),#12164);+#12160 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12161,#12162,#12163),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12161 = CARTESIAN_POINT('',(0.24012771766,0.216581097262));+#12162 = CARTESIAN_POINT('',(0.229489904384,0.193632106824));+#12163 = CARTESIAN_POINT('',(0.20558470601,0.165902076711));+#12164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12165 = PCURVE('',#8163,#12166);+#12166 = DEFINITIONAL_REPRESENTATION('',(#12167),#12171);+#12167 = LINE('',#12168,#12169);+#12168 = CARTESIAN_POINT('',(0.,-0.1));+#12169 = VECTOR('',#12170,1.);+#12170 = DIRECTION('',(1.,0.));+#12171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12172 = ORIENTED_EDGE('',*,*,#11684,.T.);+#12173 = ORIENTED_EDGE('',*,*,#12174,.T.);+#12174 = EDGE_CURVE('',#11685,#11737,#12175,.T.);+#12175 = SURFACE_CURVE('',#12176,(#12180,#12187),.PCURVE_S1.);+#12176 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12177,#12178,#12179),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12177 = CARTESIAN_POINT('',(0.314114306625,-4.661513682794E-02,+ 2.0500001));+#12178 = CARTESIAN_POINT('',(0.288655270358,-7.410611495724E-02,+ 2.0500001));+#12179 = CARTESIAN_POINT('',(0.236541937904,-0.128849019232,2.0500001));+#12180 = PCURVE('',#11700,#12181);+#12181 = DEFINITIONAL_REPRESENTATION('',(#12182),#12186);+#12182 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12183,#12184,#12185),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12183 = CARTESIAN_POINT('',(0.166738758654,0.122872719639));+#12184 = CARTESIAN_POINT('',(0.141279722386,9.538174150949E-02));+#12185 = CARTESIAN_POINT('',(8.916638993243E-02,4.063883723462E-02));+#12186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12187 = PCURVE('',#7497,#12188);+#12188 = DEFINITIONAL_REPRESENTATION('',(#12189),#12193);+#12189 = LINE('',#12190,#12191);+#12190 = CARTESIAN_POINT('',(0.,-0.1));+#12191 = VECTOR('',#12192,1.);+#12192 = DIRECTION('',(1.,0.));+#12193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12194 = ADVANCED_FACE('',(#12195),#8163,.T.);+#12195 = FACE_BOUND('',#12196,.T.);+#12196 = EDGE_LOOP('',(#12197,#12198,#12219,#12220));+#12197 = ORIENTED_EDGE('',*,*,#8143,.T.);+#12198 = ORIENTED_EDGE('',*,*,#12199,.T.);+#12199 = EDGE_CURVE('',#8108,#12130,#12200,.T.);+#12200 = SURFACE_CURVE('',#12201,(#12205,#12212),.PCURVE_S1.);+#12201 = LINE('',#12202,#12203);+#12202 = CARTESIAN_POINT('',(0.387503265631,4.709324079541E-02,2.1500001+ ));+#12203 = VECTOR('',#12204,1.);+#12204 = DIRECTION('',(-0.,-0.,-1.));+#12205 = PCURVE('',#8163,#12206);+#12206 = DEFINITIONAL_REPRESENTATION('',(#12207),#12211);+#12207 = LINE('',#12208,#12209);+#12208 = CARTESIAN_POINT('',(0.,0.));+#12209 = VECTOR('',#12210,1.);+#12210 = DIRECTION('',(0.,-1.));+#12211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12212 = PCURVE('',#8127,#12213);+#12213 = DEFINITIONAL_REPRESENTATION('',(#12214),#12218);+#12214 = LINE('',#12215,#12216);+#12215 = CARTESIAN_POINT('',(1.,0.));+#12216 = VECTOR('',#12217,1.);+#12217 = DIRECTION('',(0.,-1.));+#12218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12219 = ORIENTED_EDGE('',*,*,#12152,.T.);+#12220 = ORIENTED_EDGE('',*,*,#11661,.F.);+#12221 = ADVANCED_FACE('',(#12222),#8127,.T.);+#12222 = FACE_BOUND('',#12223,.T.);+#12223 = EDGE_LOOP('',(#12224,#12225,#12246,#12247));+#12224 = ORIENTED_EDGE('',*,*,#8107,.T.);+#12225 = ORIENTED_EDGE('',*,*,#12226,.T.);+#12226 = EDGE_CURVE('',#8063,#12107,#12227,.T.);+#12227 = SURFACE_CURVE('',#12228,(#12232,#12239),.PCURVE_S1.);+#12228 = LINE('',#12229,#12230);+#12229 = CARTESIAN_POINT('',(0.398141078907,9.299122167215E-02,2.1500001+ ));+#12230 = VECTOR('',#12231,1.);+#12231 = DIRECTION('',(-0.,-0.,-1.));+#12232 = PCURVE('',#8127,#12233);+#12233 = DEFINITIONAL_REPRESENTATION('',(#12234),#12238);+#12234 = LINE('',#12235,#12236);+#12235 = CARTESIAN_POINT('',(0.,0.));+#12236 = VECTOR('',#12237,1.);+#12237 = DIRECTION('',(0.,-1.));+#12238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12239 = PCURVE('',#8088,#12240);+#12240 = DEFINITIONAL_REPRESENTATION('',(#12241),#12245);+#12241 = LINE('',#12242,#12243);+#12242 = CARTESIAN_POINT('',(1.,0.));+#12243 = VECTOR('',#12244,1.);+#12244 = DIRECTION('',(0.,-1.));+#12245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12246 = ORIENTED_EDGE('',*,*,#12129,.T.);+#12247 = ORIENTED_EDGE('',*,*,#12199,.F.);+#12248 = ADVANCED_FACE('',(#12249),#8088,.T.);+#12249 = FACE_BOUND('',#12250,.T.);+#12250 = EDGE_LOOP('',(#12251,#12252,#12273,#12274));+#12251 = ORIENTED_EDGE('',*,*,#8062,.T.);+#12252 = ORIENTED_EDGE('',*,*,#12253,.T.);+#12253 = EDGE_CURVE('',#8018,#12084,#12254,.T.);+#12254 = SURFACE_CURVE('',#12255,(#12259,#12266),.PCURVE_S1.);+#12255 = LINE('',#12256,#12257);+#12256 = CARTESIAN_POINT('',(0.366227639079,0.166021602703,2.1500001));+#12257 = VECTOR('',#12258,1.);+#12258 = DIRECTION('',(-0.,-0.,-1.));+#12259 = PCURVE('',#8088,#12260);+#12260 = DEFINITIONAL_REPRESENTATION('',(#12261),#12265);+#12261 = LINE('',#12262,#12263);+#12262 = CARTESIAN_POINT('',(0.,0.));+#12263 = VECTOR('',#12264,1.);+#12264 = DIRECTION('',(0.,-1.));+#12265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12266 = PCURVE('',#8043,#12267);+#12267 = DEFINITIONAL_REPRESENTATION('',(#12268),#12272);+#12268 = LINE('',#12269,#12270);+#12269 = CARTESIAN_POINT('',(1.,0.));+#12270 = VECTOR('',#12271,1.);+#12271 = DIRECTION('',(0.,-1.));+#12272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12273 = ORIENTED_EDGE('',*,*,#12106,.T.);+#12274 = ORIENTED_EDGE('',*,*,#12226,.F.);+#12275 = ADVANCED_FACE('',(#12276),#8043,.T.);+#12276 = FACE_BOUND('',#12277,.T.);+#12277 = EDGE_LOOP('',(#12278,#12279,#12300,#12301));+#12278 = ORIENTED_EDGE('',*,*,#8017,.T.);+#12279 = ORIENTED_EDGE('',*,*,#12280,.T.);+#12280 = EDGE_CURVE('',#7982,#12061,#12281,.T.);+#12281 = SURFACE_CURVE('',#12282,(#12286,#12293),.PCURVE_S1.);+#12282 = LINE('',#12283,#12284);+#12283 = CARTESIAN_POINT('',(0.281961814813,0.193871158808,2.1500001));+#12284 = VECTOR('',#12285,1.);+#12285 = DIRECTION('',(-0.,-0.,-1.));+#12286 = PCURVE('',#8043,#12287);+#12287 = DEFINITIONAL_REPRESENTATION('',(#12288),#12292);+#12288 = LINE('',#12289,#12290);+#12289 = CARTESIAN_POINT('',(0.,0.));+#12290 = VECTOR('',#12291,1.);+#12291 = DIRECTION('',(0.,-1.));+#12292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12293 = PCURVE('',#8001,#12294);+#12294 = DEFINITIONAL_REPRESENTATION('',(#12295),#12299);+#12295 = LINE('',#12296,#12297);+#12296 = CARTESIAN_POINT('',(1.,0.));+#12297 = VECTOR('',#12298,1.);+#12298 = DIRECTION('',(0.,-1.));+#12299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12300 = ORIENTED_EDGE('',*,*,#12083,.T.);+#12301 = ORIENTED_EDGE('',*,*,#12253,.F.);+#12302 = ADVANCED_FACE('',(#12303),#8001,.T.);+#12303 = FACE_BOUND('',#12304,.T.);+#12304 = EDGE_LOOP('',(#12305,#12306,#12327,#12328));+#12305 = ORIENTED_EDGE('',*,*,#7981,.T.);+#12306 = ORIENTED_EDGE('',*,*,#12307,.T.);+#12307 = EDGE_CURVE('',#7946,#12038,#12308,.T.);+#12308 = SURFACE_CURVE('',#12309,(#12313,#12320),.PCURVE_S1.);+#12309 = LINE('',#12310,#12311);+#12310 = CARTESIAN_POINT('',(0.23498810001,0.187894859214,2.1500001));+#12311 = VECTOR('',#12312,1.);+#12312 = DIRECTION('',(-0.,-0.,-1.));+#12313 = PCURVE('',#8001,#12314);+#12314 = DEFINITIONAL_REPRESENTATION('',(#12315),#12319);+#12315 = LINE('',#12316,#12317);+#12316 = CARTESIAN_POINT('',(0.,0.));+#12317 = VECTOR('',#12318,1.);+#12318 = DIRECTION('',(0.,-1.));+#12319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12320 = PCURVE('',#7965,#12321);+#12321 = DEFINITIONAL_REPRESENTATION('',(#12322),#12326);+#12322 = LINE('',#12323,#12324);+#12323 = CARTESIAN_POINT('',(1.,0.));+#12324 = VECTOR('',#12325,1.);+#12325 = DIRECTION('',(0.,-1.));+#12326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12327 = ORIENTED_EDGE('',*,*,#12060,.T.);+#12328 = ORIENTED_EDGE('',*,*,#12280,.F.);+#12329 = ADVANCED_FACE('',(#12330),#7965,.T.);+#12330 = FACE_BOUND('',#12331,.T.);+#12331 = EDGE_LOOP('',(#12332,#12333,#12354,#12355));+#12332 = ORIENTED_EDGE('',*,*,#7945,.T.);+#12333 = ORIENTED_EDGE('',*,*,#12334,.T.);+#12334 = EDGE_CURVE('',#7919,#12015,#12335,.T.);+#12335 = SURFACE_CURVE('',#12336,(#12340,#12347),.PCURVE_S1.);+#12336 = LINE('',#12337,#12338);+#12337 = CARTESIAN_POINT('',(0.186580073304,0.170205012418,2.1500001));+#12338 = VECTOR('',#12339,1.);+#12339 = DIRECTION('',(-0.,-0.,-1.));+#12340 = PCURVE('',#7965,#12341);+#12341 = DEFINITIONAL_REPRESENTATION('',(#12342),#12346);+#12342 = LINE('',#12343,#12344);+#12343 = CARTESIAN_POINT('',(0.,0.));+#12344 = VECTOR('',#12345,1.);+#12345 = DIRECTION('',(0.,-1.));+#12346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12347 = PCURVE('',#7934,#12348);+#12348 = DEFINITIONAL_REPRESENTATION('',(#12349),#12353);+#12349 = LINE('',#12350,#12351);+#12350 = CARTESIAN_POINT('',(4.876660468154E-02,0.));+#12351 = VECTOR('',#12352,1.);+#12352 = DIRECTION('',(0.,-1.));+#12353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12354 = ORIENTED_EDGE('',*,*,#12037,.T.);+#12355 = ORIENTED_EDGE('',*,*,#12307,.F.);+#12356 = ADVANCED_FACE('',(#12357),#7934,.T.);+#12357 = FACE_BOUND('',#12358,.T.);+#12358 = EDGE_LOOP('',(#12359,#12360,#12381,#12382));+#12359 = ORIENTED_EDGE('',*,*,#7918,.F.);+#12360 = ORIENTED_EDGE('',*,*,#12361,.T.);+#12361 = EDGE_CURVE('',#7883,#11992,#12362,.T.);+#12362 = SURFACE_CURVE('',#12363,(#12367,#12374),.PCURVE_S1.);+#12363 = LINE('',#12364,#12365);+#12364 = CARTESIAN_POINT('',(0.186580073304,0.121438407736,2.1500001));+#12365 = VECTOR('',#12366,1.);+#12366 = DIRECTION('',(-0.,-0.,-1.));+#12367 = PCURVE('',#7934,#12368);+#12368 = DEFINITIONAL_REPRESENTATION('',(#12369),#12373);+#12369 = LINE('',#12370,#12371);+#12370 = CARTESIAN_POINT('',(0.,0.));+#12371 = VECTOR('',#12372,1.);+#12372 = DIRECTION('',(0.,-1.));+#12373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12374 = PCURVE('',#7902,#12375);+#12375 = DEFINITIONAL_REPRESENTATION('',(#12376),#12380);+#12376 = LINE('',#12377,#12378);+#12377 = CARTESIAN_POINT('',(1.,0.));+#12378 = VECTOR('',#12379,1.);+#12379 = DIRECTION('',(0.,-1.));+#12380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12381 = ORIENTED_EDGE('',*,*,#12014,.T.);+#12382 = ORIENTED_EDGE('',*,*,#12334,.F.);+#12383 = ADVANCED_FACE('',(#12384),#7902,.T.);+#12384 = FACE_BOUND('',#12385,.T.);+#12385 = EDGE_LOOP('',(#12386,#12387,#12408,#12409));+#12386 = ORIENTED_EDGE('',*,*,#7882,.T.);+#12387 = ORIENTED_EDGE('',*,*,#12388,.T.);+#12388 = EDGE_CURVE('',#7847,#11969,#12389,.T.);+#12389 = SURFACE_CURVE('',#12390,(#12394,#12401),.PCURVE_S1.);+#12390 = LINE('',#12391,#12392);+#12391 = CARTESIAN_POINT('',(0.237259093855,0.14534360611,2.1500001));+#12392 = VECTOR('',#12393,1.);+#12393 = DIRECTION('',(-0.,-0.,-1.));+#12394 = PCURVE('',#7902,#12395);+#12395 = DEFINITIONAL_REPRESENTATION('',(#12396),#12400);+#12396 = LINE('',#12397,#12398);+#12397 = CARTESIAN_POINT('',(0.,0.));+#12398 = VECTOR('',#12399,1.);+#12399 = DIRECTION('',(0.,-1.));+#12400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12401 = PCURVE('',#7866,#12402);+#12402 = DEFINITIONAL_REPRESENTATION('',(#12403),#12407);+#12403 = LINE('',#12404,#12405);+#12404 = CARTESIAN_POINT('',(1.,0.));+#12405 = VECTOR('',#12406,1.);+#12406 = DIRECTION('',(0.,-1.));+#12407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12408 = ORIENTED_EDGE('',*,*,#11991,.T.);+#12409 = ORIENTED_EDGE('',*,*,#12361,.F.);+#12410 = ADVANCED_FACE('',(#12411),#7866,.T.);+#12411 = FACE_BOUND('',#12412,.T.);+#12412 = EDGE_LOOP('',(#12413,#12414,#12435,#12436));+#12413 = ORIENTED_EDGE('',*,*,#7846,.T.);+#12414 = ORIENTED_EDGE('',*,*,#12415,.T.);+#12415 = EDGE_CURVE('',#7811,#11946,#12416,.T.);+#12416 = SURFACE_CURVE('',#12417,(#12421,#12428),.PCURVE_S1.);+#12417 = LINE('',#12418,#12419);+#12418 = CARTESIAN_POINT('',(0.282918022748,0.153232321573,2.1500001));+#12419 = VECTOR('',#12420,1.);+#12420 = DIRECTION('',(-0.,-0.,-1.));+#12421 = PCURVE('',#7866,#12422);+#12422 = DEFINITIONAL_REPRESENTATION('',(#12423),#12427);+#12423 = LINE('',#12424,#12425);+#12424 = CARTESIAN_POINT('',(0.,0.));+#12425 = VECTOR('',#12426,1.);+#12426 = DIRECTION('',(0.,-1.));+#12427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12428 = PCURVE('',#7830,#12429);+#12429 = DEFINITIONAL_REPRESENTATION('',(#12430),#12434);+#12430 = LINE('',#12431,#12432);+#12431 = CARTESIAN_POINT('',(1.,0.));+#12432 = VECTOR('',#12433,1.);+#12433 = DIRECTION('',(0.,-1.));+#12434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12435 = ORIENTED_EDGE('',*,*,#11968,.T.);+#12436 = ORIENTED_EDGE('',*,*,#12388,.F.);+#12437 = ADVANCED_FACE('',(#12438),#7830,.T.);+#12438 = FACE_BOUND('',#12439,.T.);+#12439 = EDGE_LOOP('',(#12440,#12441,#12462,#12463));+#12440 = ORIENTED_EDGE('',*,*,#7810,.T.);+#12441 = ORIENTED_EDGE('',*,*,#12442,.T.);+#12442 = EDGE_CURVE('',#7766,#11923,#12443,.T.);+#12443 = SURFACE_CURVE('',#12444,(#12448,#12455),.PCURVE_S1.);+#12444 = LINE('',#12445,#12446);+#12445 = CARTESIAN_POINT('',(0.33108699747,0.136259630728,2.1500001));+#12446 = VECTOR('',#12447,1.);+#12447 = DIRECTION('',(-0.,-0.,-1.));+#12448 = PCURVE('',#7830,#12449);+#12449 = DEFINITIONAL_REPRESENTATION('',(#12450),#12454);+#12450 = LINE('',#12451,#12452);+#12451 = CARTESIAN_POINT('',(0.,0.));+#12452 = VECTOR('',#12453,1.);+#12453 = DIRECTION('',(0.,-1.));+#12454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12455 = PCURVE('',#7791,#12456);+#12456 = DEFINITIONAL_REPRESENTATION('',(#12457),#12461);+#12457 = LINE('',#12458,#12459);+#12458 = CARTESIAN_POINT('',(1.,0.));+#12459 = VECTOR('',#12460,1.);+#12460 = DIRECTION('',(0.,-1.));+#12461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12462 = ORIENTED_EDGE('',*,*,#11945,.T.);+#12463 = ORIENTED_EDGE('',*,*,#12415,.F.);+#12464 = ADVANCED_FACE('',(#12465),#7791,.T.);+#12465 = FACE_BOUND('',#12466,.T.);+#12466 = EDGE_LOOP('',(#12467,#12468,#12489,#12490));+#12467 = ORIENTED_EDGE('',*,*,#7765,.T.);+#12468 = ORIENTED_EDGE('',*,*,#12469,.T.);+#12469 = EDGE_CURVE('',#7730,#11900,#12470,.T.);+#12470 = SURFACE_CURVE('',#12471,(#12475,#12482),.PCURVE_S1.);+#12471 = LINE('',#12472,#12473);+#12472 = CARTESIAN_POINT('',(0.348657318275,8.940544191616E-02,2.1500001+ ));+#12473 = VECTOR('',#12474,1.);+#12474 = DIRECTION('',(-0.,-0.,-1.));+#12475 = PCURVE('',#7791,#12476);+#12476 = DEFINITIONAL_REPRESENTATION('',(#12477),#12481);+#12477 = LINE('',#12478,#12479);+#12478 = CARTESIAN_POINT('',(0.,0.));+#12479 = VECTOR('',#12480,1.);+#12480 = DIRECTION('',(0.,-1.));+#12481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12482 = PCURVE('',#7749,#12483);+#12483 = DEFINITIONAL_REPRESENTATION('',(#12484),#12488);+#12484 = LINE('',#12485,#12486);+#12485 = CARTESIAN_POINT('',(1.,0.));+#12486 = VECTOR('',#12487,1.);+#12487 = DIRECTION('',(0.,-1.));+#12488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12489 = ORIENTED_EDGE('',*,*,#11922,.T.);+#12490 = ORIENTED_EDGE('',*,*,#12442,.F.);+#12491 = ADVANCED_FACE('',(#12492),#7749,.T.);+#12492 = FACE_BOUND('',#12493,.T.);+#12493 = EDGE_LOOP('',(#12494,#12495,#12516,#12517));+#12494 = ORIENTED_EDGE('',*,*,#7729,.T.);+#12495 = ORIENTED_EDGE('',*,*,#12496,.T.);+#12496 = EDGE_CURVE('',#7694,#11877,#12497,.T.);+#12497 = SURFACE_CURVE('',#12498,(#12502,#12509),.PCURVE_S1.);+#12498 = LINE('',#12499,#12500);+#12499 = CARTESIAN_POINT('',(0.340290498844,5.24719104294E-02,2.1500001)+ );+#12500 = VECTOR('',#12501,1.);+#12501 = DIRECTION('',(-0.,-0.,-1.));+#12502 = PCURVE('',#7749,#12503);+#12503 = DEFINITIONAL_REPRESENTATION('',(#12504),#12508);+#12504 = LINE('',#12505,#12506);+#12505 = CARTESIAN_POINT('',(0.,0.));+#12506 = VECTOR('',#12507,1.);+#12507 = DIRECTION('',(0.,-1.));+#12508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12509 = PCURVE('',#7713,#12510);+#12510 = DEFINITIONAL_REPRESENTATION('',(#12511),#12515);+#12511 = LINE('',#12512,#12513);+#12512 = CARTESIAN_POINT('',(1.,0.));+#12513 = VECTOR('',#12514,1.);+#12514 = DIRECTION('',(0.,-1.));+#12515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12516 = ORIENTED_EDGE('',*,*,#11899,.T.);+#12517 = ORIENTED_EDGE('',*,*,#12469,.F.);+#12518 = ADVANCED_FACE('',(#12519),#7713,.T.);+#12519 = FACE_BOUND('',#12520,.T.);+#12520 = EDGE_LOOP('',(#12521,#12522,#12543,#12544));+#12521 = ORIENTED_EDGE('',*,*,#7693,.T.);+#12522 = ORIENTED_EDGE('',*,*,#12523,.T.);+#12523 = EDGE_CURVE('',#7658,#11854,#12524,.T.);+#12524 = SURFACE_CURVE('',#12525,(#12529,#12536),.PCURVE_S1.);+#12525 = LINE('',#12526,#12527);+#12526 = CARTESIAN_POINT('',(0.30801848104,5.259143642127E-03,2.1500001)+ );+#12527 = VECTOR('',#12528,1.);+#12528 = DIRECTION('',(-0.,-0.,-1.));+#12529 = PCURVE('',#7713,#12530);+#12530 = DEFINITIONAL_REPRESENTATION('',(#12531),#12535);+#12531 = LINE('',#12532,#12533);+#12532 = CARTESIAN_POINT('',(0.,0.));+#12533 = VECTOR('',#12534,1.);+#12534 = DIRECTION('',(0.,-1.));+#12535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12536 = PCURVE('',#7677,#12537);+#12537 = DEFINITIONAL_REPRESENTATION('',(#12538),#12542);+#12538 = LINE('',#12539,#12540);+#12539 = CARTESIAN_POINT('',(1.,0.));+#12540 = VECTOR('',#12541,1.);+#12541 = DIRECTION('',(0.,-1.));+#12542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12543 = ORIENTED_EDGE('',*,*,#11876,.T.);+#12544 = ORIENTED_EDGE('',*,*,#12496,.F.);+#12545 = ADVANCED_FACE('',(#12546),#7677,.T.);+#12546 = FACE_BOUND('',#12547,.T.);+#12547 = EDGE_LOOP('',(#12548,#12549,#12570,#12571));+#12548 = ORIENTED_EDGE('',*,*,#7657,.T.);+#12549 = ORIENTED_EDGE('',*,*,#12550,.T.);+#12550 = EDGE_CURVE('',#7622,#11831,#12551,.T.);+#12551 = SURFACE_CURVE('',#12552,(#12556,#12563),.PCURVE_S1.);+#12552 = LINE('',#12553,#12554);+#12553 = CARTESIAN_POINT('',(0.26188144818,-4.565892889301E-02,2.1500001+ ));+#12554 = VECTOR('',#12555,1.);+#12555 = DIRECTION('',(-0.,-0.,-1.));+#12556 = PCURVE('',#7677,#12557);+#12557 = DEFINITIONAL_REPRESENTATION('',(#12558),#12562);+#12558 = LINE('',#12559,#12560);+#12559 = CARTESIAN_POINT('',(0.,0.));+#12560 = VECTOR('',#12561,1.);+#12561 = DIRECTION('',(0.,-1.));+#12562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12563 = PCURVE('',#7641,#12564);+#12564 = DEFINITIONAL_REPRESENTATION('',(#12565),#12569);+#12565 = LINE('',#12566,#12567);+#12566 = CARTESIAN_POINT('',(1.,0.));+#12567 = VECTOR('',#12568,1.);+#12568 = DIRECTION('',(0.,-1.));+#12569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12570 = ORIENTED_EDGE('',*,*,#11853,.T.);+#12571 = ORIENTED_EDGE('',*,*,#12523,.F.);+#12572 = ADVANCED_FACE('',(#12573),#7641,.T.);+#12573 = FACE_BOUND('',#12574,.T.);+#12574 = EDGE_LOOP('',(#12575,#12576,#12597,#12598));+#12575 = ORIENTED_EDGE('',*,*,#7621,.T.);+#12576 = ORIENTED_EDGE('',*,*,#12577,.T.);+#12577 = EDGE_CURVE('',#7595,#11808,#12578,.T.);+#12578 = SURFACE_CURVE('',#12579,(#12583,#12590),.PCURVE_S1.);+#12579 = LINE('',#12580,#12581);+#12580 = CARTESIAN_POINT('',(0.183711449499,-0.128849019232,2.1500001));+#12581 = VECTOR('',#12582,1.);+#12582 = DIRECTION('',(-0.,-0.,-1.));+#12583 = PCURVE('',#7641,#12584);+#12584 = DEFINITIONAL_REPRESENTATION('',(#12585),#12589);+#12585 = LINE('',#12586,#12587);+#12586 = CARTESIAN_POINT('',(0.,0.));+#12587 = VECTOR('',#12588,1.);+#12588 = DIRECTION('',(0.,-1.));+#12589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12590 = PCURVE('',#7610,#12591);+#12591 = DEFINITIONAL_REPRESENTATION('',(#12592),#12596);+#12592 = LINE('',#12593,#12594);+#12593 = CARTESIAN_POINT('',(4.063883723462E-02,0.));+#12594 = VECTOR('',#12595,1.);+#12595 = DIRECTION('',(0.,-1.));+#12596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12597 = ORIENTED_EDGE('',*,*,#11830,.T.);+#12598 = ORIENTED_EDGE('',*,*,#12550,.F.);+#12599 = ADVANCED_FACE('',(#12600),#7610,.T.);+#12600 = FACE_BOUND('',#12601,.T.);+#12601 = EDGE_LOOP('',(#12602,#12603,#12624,#12625));+#12602 = ORIENTED_EDGE('',*,*,#7594,.F.);+#12603 = ORIENTED_EDGE('',*,*,#12604,.T.);+#12604 = EDGE_CURVE('',#7568,#11785,#12605,.T.);+#12605 = SURFACE_CURVE('',#12606,(#12610,#12617),.PCURVE_S1.);+#12606 = LINE('',#12607,#12608);+#12607 = CARTESIAN_POINT('',(0.183711449499,-0.169487856467,2.1500001));+#12608 = VECTOR('',#12609,1.);+#12609 = DIRECTION('',(-0.,-0.,-1.));+#12610 = PCURVE('',#7610,#12611);+#12611 = DEFINITIONAL_REPRESENTATION('',(#12612),#12616);+#12612 = LINE('',#12613,#12614);+#12613 = CARTESIAN_POINT('',(0.,0.));+#12614 = VECTOR('',#12615,1.);+#12615 = DIRECTION('',(0.,-1.));+#12616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12617 = PCURVE('',#7583,#12618);+#12618 = DEFINITIONAL_REPRESENTATION('',(#12619),#12623);+#12619 = LINE('',#12620,#12621);+#12620 = CARTESIAN_POINT('',(0.216820149246,0.));+#12621 = VECTOR('',#12622,1.);+#12622 = DIRECTION('',(0.,-1.));+#12623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12624 = ORIENTED_EDGE('',*,*,#11807,.T.);+#12625 = ORIENTED_EDGE('',*,*,#12577,.F.);+#12626 = ADVANCED_FACE('',(#12627),#7583,.T.);+#12627 = FACE_BOUND('',#12628,.T.);+#12628 = EDGE_LOOP('',(#12629,#12630,#12651,#12652));+#12629 = ORIENTED_EDGE('',*,*,#7567,.F.);+#12630 = ORIENTED_EDGE('',*,*,#12631,.T.);+#12631 = EDGE_CURVE('',#7541,#11762,#12632,.T.);+#12632 = SURFACE_CURVE('',#12633,(#12637,#12644),.PCURVE_S1.);+#12633 = LINE('',#12634,#12635);+#12634 = CARTESIAN_POINT('',(0.400531598745,-0.169487856467,2.1500001));+#12635 = VECTOR('',#12636,1.);+#12636 = DIRECTION('',(-0.,-0.,-1.));+#12637 = PCURVE('',#7583,#12638);+#12638 = DEFINITIONAL_REPRESENTATION('',(#12639),#12643);+#12639 = LINE('',#12640,#12641);+#12640 = CARTESIAN_POINT('',(0.,0.));+#12641 = VECTOR('',#12642,1.);+#12642 = DIRECTION('',(0.,-1.));+#12643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12644 = PCURVE('',#7556,#12645);+#12645 = DEFINITIONAL_REPRESENTATION('',(#12646),#12650);+#12646 = LINE('',#12647,#12648);+#12647 = CARTESIAN_POINT('',(4.063883723462E-02,0.));+#12648 = VECTOR('',#12649,1.);+#12649 = DIRECTION('',(0.,-1.));+#12650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12651 = ORIENTED_EDGE('',*,*,#11784,.T.);+#12652 = ORIENTED_EDGE('',*,*,#12604,.F.);+#12653 = ADVANCED_FACE('',(#12654),#7556,.T.);+#12654 = FACE_BOUND('',#12655,.T.);+#12655 = EDGE_LOOP('',(#12656,#12657,#12678,#12679));+#12656 = ORIENTED_EDGE('',*,*,#7540,.F.);+#12657 = ORIENTED_EDGE('',*,*,#12658,.T.);+#12658 = EDGE_CURVE('',#7514,#11739,#12659,.T.);+#12659 = SURFACE_CURVE('',#12660,(#12664,#12671),.PCURVE_S1.);+#12660 = LINE('',#12661,#12662);+#12661 = CARTESIAN_POINT('',(0.400531598745,-0.128849019232,2.1500001));+#12662 = VECTOR('',#12663,1.);+#12663 = DIRECTION('',(-0.,-0.,-1.));+#12664 = PCURVE('',#7556,#12665);+#12665 = DEFINITIONAL_REPRESENTATION('',(#12666),#12670);+#12666 = LINE('',#12667,#12668);+#12667 = CARTESIAN_POINT('',(0.,0.));+#12668 = VECTOR('',#12669,1.);+#12669 = DIRECTION('',(0.,-1.));+#12670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12671 = PCURVE('',#7529,#12672);+#12672 = DEFINITIONAL_REPRESENTATION('',(#12673),#12677);+#12673 = LINE('',#12674,#12675);+#12674 = CARTESIAN_POINT('',(0.163989660841,0.));+#12675 = VECTOR('',#12676,1.);+#12676 = DIRECTION('',(0.,-1.));+#12677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12678 = ORIENTED_EDGE('',*,*,#11761,.T.);+#12679 = ORIENTED_EDGE('',*,*,#12631,.F.);+#12680 = ADVANCED_FACE('',(#12681),#7529,.T.);+#12681 = FACE_BOUND('',#12682,.T.);+#12682 = EDGE_LOOP('',(#12683,#12684,#12705,#12706));+#12683 = ORIENTED_EDGE('',*,*,#7513,.F.);+#12684 = ORIENTED_EDGE('',*,*,#12685,.T.);+#12685 = EDGE_CURVE('',#7476,#11737,#12686,.T.);+#12686 = SURFACE_CURVE('',#12687,(#12691,#12698),.PCURVE_S1.);+#12687 = LINE('',#12688,#12689);+#12688 = CARTESIAN_POINT('',(0.236541937904,-0.128849019232,2.1500001));+#12689 = VECTOR('',#12690,1.);+#12690 = DIRECTION('',(-0.,-0.,-1.));+#12691 = PCURVE('',#7529,#12692);+#12692 = DEFINITIONAL_REPRESENTATION('',(#12693),#12697);+#12693 = LINE('',#12694,#12695);+#12694 = CARTESIAN_POINT('',(0.,0.));+#12695 = VECTOR('',#12696,1.);+#12696 = DIRECTION('',(0.,-1.));+#12697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12698 = PCURVE('',#7497,#12699);+#12699 = DEFINITIONAL_REPRESENTATION('',(#12700),#12704);+#12700 = LINE('',#12701,#12702);+#12701 = CARTESIAN_POINT('',(1.,0.));+#12702 = VECTOR('',#12703,1.);+#12703 = DIRECTION('',(0.,-1.));+#12704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12705 = ORIENTED_EDGE('',*,*,#11736,.T.);+#12706 = ORIENTED_EDGE('',*,*,#12658,.F.);+#12707 = ADVANCED_FACE('',(#12708),#7497,.T.);+#12708 = FACE_BOUND('',#12709,.T.);+#12709 = EDGE_LOOP('',(#12710,#12711,#12712,#12713));+#12710 = ORIENTED_EDGE('',*,*,#7475,.T.);+#12711 = ORIENTED_EDGE('',*,*,#11712,.T.);+#12712 = ORIENTED_EDGE('',*,*,#12174,.T.);+#12713 = ORIENTED_EDGE('',*,*,#12685,.F.);+#12714 = ADVANCED_FACE('',(#12715),#7462,.T.);+#12715 = FACE_BOUND('',#12716,.T.);+#12716 = EDGE_LOOP('',(#12717,#12718,#12741,#12769));+#12717 = ORIENTED_EDGE('',*,*,#7448,.F.);+#12718 = ORIENTED_EDGE('',*,*,#12719,.T.);+#12719 = EDGE_CURVE('',#7422,#12720,#12722,.T.);+#12720 = VERTEX_POINT('',#12721);+#12721 = CARTESIAN_POINT('',(0.114147322233,-0.128849019232,2.0500001));+#12722 = SURFACE_CURVE('',#12723,(#12727,#12734),.PCURVE_S1.);+#12723 = LINE('',#12724,#12725);+#12724 = CARTESIAN_POINT('',(0.114147322233,-0.128849019232,2.1500001));+#12725 = VECTOR('',#12726,1.);+#12726 = DIRECTION('',(-0.,-0.,-1.));+#12727 = PCURVE('',#7462,#12728);+#12728 = DEFINITIONAL_REPRESENTATION('',(#12729),#12733);+#12729 = LINE('',#12730,#12731);+#12730 = CARTESIAN_POINT('',(0.,0.));+#12731 = VECTOR('',#12732,1.);+#12732 = DIRECTION('',(0.,-1.));+#12733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12734 = PCURVE('',#7437,#12735);+#12735 = DEFINITIONAL_REPRESENTATION('',(#12736),#12740);+#12736 = LINE('',#12737,#12738);+#12737 = CARTESIAN_POINT('',(7.410611495724E-02,0.));+#12738 = VECTOR('',#12739,1.);+#12739 = DIRECTION('',(0.,-1.));+#12740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12741 = ORIENTED_EDGE('',*,*,#12742,.T.);+#12742 = EDGE_CURVE('',#12720,#12743,#12745,.T.);+#12743 = VERTEX_POINT('',#12744);+#12744 = CARTESIAN_POINT('',(0.114147322233,-0.169487856467,2.0500001));+#12745 = SURFACE_CURVE('',#12746,(#12750,#12757),.PCURVE_S1.);+#12746 = LINE('',#12747,#12748);+#12747 = CARTESIAN_POINT('',(0.114147322233,-0.128849019232,2.0500001));+#12748 = VECTOR('',#12749,1.);+#12749 = DIRECTION('',(0.,-1.,0.));+#12750 = PCURVE('',#7462,#12751);+#12751 = DEFINITIONAL_REPRESENTATION('',(#12752),#12756);+#12752 = LINE('',#12753,#12754);+#12753 = CARTESIAN_POINT('',(0.,-0.1));+#12754 = VECTOR('',#12755,1.);+#12755 = DIRECTION('',(1.,0.));+#12756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12757 = PCURVE('',#12758,#12763);+#12758 = PLANE('',#12759);+#12759 = AXIS2_PLACEMENT_3D('',#12760,#12761,#12762);+#12760 = CARTESIAN_POINT('',(-0.147375547971,-0.169487856467,2.0500001)+ );+#12761 = DIRECTION('',(0.,0.,1.));+#12762 = DIRECTION('',(1.,0.,0.));+#12763 = DEFINITIONAL_REPRESENTATION('',(#12764),#12768);+#12764 = LINE('',#12765,#12766);+#12765 = CARTESIAN_POINT('',(0.261522870204,4.063883723462E-02));+#12766 = VECTOR('',#12767,1.);+#12767 = DIRECTION('',(0.,-1.));+#12768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12769 = ORIENTED_EDGE('',*,*,#12770,.F.);+#12770 = EDGE_CURVE('',#7177,#12743,#12771,.T.);+#12771 = SURFACE_CURVE('',#12772,(#12776,#12783),.PCURVE_S1.);+#12772 = LINE('',#12773,#12774);+#12773 = CARTESIAN_POINT('',(0.114147322233,-0.169487856467,2.1500001));+#12774 = VECTOR('',#12775,1.);+#12775 = DIRECTION('',(-0.,-0.,-1.));+#12776 = PCURVE('',#7462,#12777);+#12777 = DEFINITIONAL_REPRESENTATION('',(#12778),#12782);+#12778 = LINE('',#12779,#12780);+#12779 = CARTESIAN_POINT('',(4.063883723462E-02,0.));+#12780 = VECTOR('',#12781,1.);+#12781 = DIRECTION('',(0.,-1.));+#12782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12783 = PCURVE('',#7194,#12784);+#12784 = DEFINITIONAL_REPRESENTATION('',(#12785),#12789);+#12785 = LINE('',#12786,#12787);+#12786 = CARTESIAN_POINT('',(0.,0.));+#12787 = VECTOR('',#12788,1.);+#12788 = DIRECTION('',(0.,-1.));+#12789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12790 = ADVANCED_FACE('',(#12791),#12758,.T.);+#12791 = FACE_BOUND('',#12792,.F.);+#12792 = EDGE_LOOP('',(#12793,#12818,#12841,#12864,#12887,#12910,#12933,+ #12956,#12979,#13000,#13001));+#12793 = ORIENTED_EDGE('',*,*,#12794,.T.);+#12794 = EDGE_CURVE('',#12795,#12797,#12799,.T.);+#12795 = VERTEX_POINT('',#12796);+#12796 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.169487856467,+ 2.0500001));+#12797 = VERTEX_POINT('',#12798);+#12798 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.128849019232,+ 2.0500001));+#12799 = SURFACE_CURVE('',#12800,(#12804,#12811),.PCURVE_S1.);+#12800 = LINE('',#12801,#12802);+#12801 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.169487856467,+ 2.0500001));+#12802 = VECTOR('',#12803,1.);+#12803 = DIRECTION('',(0.,1.,0.));+#12804 = PCURVE('',#12758,#12805);+#12805 = DEFINITIONAL_REPRESENTATION('',(#12806),#12810);+#12806 = LINE('',#12807,#12808);+#12807 = CARTESIAN_POINT('',(6.454403560792E-02,0.));+#12808 = VECTOR('',#12809,1.);+#12809 = DIRECTION('',(0.,1.));+#12810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12811 = PCURVE('',#7221,#12812);+#12812 = DEFINITIONAL_REPRESENTATION('',(#12813),#12817);+#12813 = LINE('',#12814,#12815);+#12814 = CARTESIAN_POINT('',(0.,-0.1));+#12815 = VECTOR('',#12816,1.);+#12816 = DIRECTION('',(1.,0.));+#12817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12818 = ORIENTED_EDGE('',*,*,#12819,.T.);+#12819 = EDGE_CURVE('',#12797,#12820,#12822,.T.);+#12820 = VERTEX_POINT('',#12821);+#12821 = CARTESIAN_POINT('',(-7.769189471324E-03,-0.128849019232,+ 2.0500001));+#12822 = SURFACE_CURVE('',#12823,(#12827,#12834),.PCURVE_S1.);+#12823 = LINE('',#12824,#12825);+#12824 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.128849019232,+ 2.0500001));+#12825 = VECTOR('',#12826,1.);+#12826 = DIRECTION('',(1.,0.,0.));+#12827 = PCURVE('',#12758,#12828);+#12828 = DEFINITIONAL_REPRESENTATION('',(#12829),#12833);+#12829 = LINE('',#12830,#12831);+#12830 = CARTESIAN_POINT('',(6.454403560792E-02,4.063883723462E-02));+#12831 = VECTOR('',#12832,1.);+#12832 = DIRECTION('',(1.,0.));+#12833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12834 = PCURVE('',#7248,#12835);+#12835 = DEFINITIONAL_REPRESENTATION('',(#12836),#12840);+#12836 = LINE('',#12837,#12838);+#12837 = CARTESIAN_POINT('',(0.,-0.1));+#12838 = VECTOR('',#12839,1.);+#12839 = DIRECTION('',(1.,0.));+#12840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12841 = ORIENTED_EDGE('',*,*,#12842,.T.);+#12842 = EDGE_CURVE('',#12820,#12843,#12845,.T.);+#12843 = VERTEX_POINT('',#12844);+#12844 = CARTESIAN_POINT('',(-7.769189471324E-03,0.143909294207,+ 2.0500001));+#12845 = SURFACE_CURVE('',#12846,(#12850,#12857),.PCURVE_S1.);+#12846 = LINE('',#12847,#12848);+#12847 = CARTESIAN_POINT('',(-7.769189471324E-03,-0.128849019232,+ 2.0500001));+#12848 = VECTOR('',#12849,1.);+#12849 = DIRECTION('',(0.,1.,0.));+#12850 = PCURVE('',#12758,#12851);+#12851 = DEFINITIONAL_REPRESENTATION('',(#12852),#12856);+#12852 = LINE('',#12853,#12854);+#12853 = CARTESIAN_POINT('',(0.1396063585,4.063883723462E-02));+#12854 = VECTOR('',#12855,1.);+#12855 = DIRECTION('',(0.,1.));+#12856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12857 = PCURVE('',#7275,#12858);+#12858 = DEFINITIONAL_REPRESENTATION('',(#12859),#12863);+#12859 = LINE('',#12860,#12861);+#12860 = CARTESIAN_POINT('',(0.,-0.1));+#12861 = VECTOR('',#12862,1.);+#12862 = DIRECTION('',(1.,0.));+#12863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12864 = ORIENTED_EDGE('',*,*,#12865,.T.);+#12865 = EDGE_CURVE('',#12843,#12866,#12868,.T.);+#12866 = VERTEX_POINT('',#12867);+#12867 = CARTESIAN_POINT('',(-8.856875997309E-02,0.125741343444,+ 2.0500001));+#12868 = SURFACE_CURVE('',#12869,(#12873,#12880),.PCURVE_S1.);+#12869 = LINE('',#12870,#12871);+#12870 = CARTESIAN_POINT('',(-7.769189471324E-03,0.143909294207,+ 2.0500001));+#12871 = VECTOR('',#12872,1.);+#12872 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#12873 = PCURVE('',#12758,#12874);+#12874 = DEFINITIONAL_REPRESENTATION('',(#12875),#12879);+#12875 = LINE('',#12876,#12877);+#12876 = CARTESIAN_POINT('',(0.1396063585,0.313397150674));+#12877 = VECTOR('',#12878,1.);+#12878 = DIRECTION('',(-0.97564065493,-0.219374821819));+#12879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12880 = PCURVE('',#7302,#12881);+#12881 = DEFINITIONAL_REPRESENTATION('',(#12882),#12886);+#12882 = LINE('',#12883,#12884);+#12883 = CARTESIAN_POINT('',(-0.,-0.1));+#12884 = VECTOR('',#12885,1.);+#12885 = DIRECTION('',(1.,0.));+#12886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12887 = ORIENTED_EDGE('',*,*,#12888,.T.);+#12888 = EDGE_CURVE('',#12866,#12889,#12891,.T.);+#12889 = VERTEX_POINT('',#12890);+#12890 = CARTESIAN_POINT('',(-8.856875997309E-02,0.16972690845,2.0500001+ ));+#12891 = SURFACE_CURVE('',#12892,(#12896,#12903),.PCURVE_S1.);+#12892 = LINE('',#12893,#12894);+#12893 = CARTESIAN_POINT('',(-8.856875997309E-02,0.125741343444,+ 2.0500001));+#12894 = VECTOR('',#12895,1.);+#12895 = DIRECTION('',(0.,1.,0.));+#12896 = PCURVE('',#12758,#12897);+#12897 = DEFINITIONAL_REPRESENTATION('',(#12898),#12902);+#12898 = LINE('',#12899,#12900);+#12899 = CARTESIAN_POINT('',(5.880678799833E-02,0.29522919991));+#12900 = VECTOR('',#12901,1.);+#12901 = DIRECTION('',(0.,1.));+#12902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12903 = PCURVE('',#7329,#12904);+#12904 = DEFINITIONAL_REPRESENTATION('',(#12905),#12909);+#12905 = LINE('',#12906,#12907);+#12906 = CARTESIAN_POINT('',(0.,-0.1));+#12907 = VECTOR('',#12908,1.);+#12908 = DIRECTION('',(1.,0.));+#12909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12910 = ORIENTED_EDGE('',*,*,#12911,.T.);+#12911 = EDGE_CURVE('',#12889,#12912,#12914,.T.);+#12912 = VERTEX_POINT('',#12913);+#12913 = CARTESIAN_POINT('',(-8.24729343879E-03,0.187416755247,2.0500001+ ));+#12914 = SURFACE_CURVE('',#12915,(#12919,#12926),.PCURVE_S1.);+#12915 = LINE('',#12916,#12917);+#12916 = CARTESIAN_POINT('',(-8.856875997309E-02,0.16972690845,2.0500001+ ));+#12917 = VECTOR('',#12918,1.);+#12918 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#12919 = PCURVE('',#12758,#12920);+#12920 = DEFINITIONAL_REPRESENTATION('',(#12921),#12925);+#12921 = LINE('',#12922,#12923);+#12922 = CARTESIAN_POINT('',(5.880678799833E-02,0.339214764917));+#12923 = VECTOR('',#12924,1.);+#12924 = DIRECTION('',(0.976595648113,0.215083565358));+#12925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12926 = PCURVE('',#7356,#12927);+#12927 = DEFINITIONAL_REPRESENTATION('',(#12928),#12932);+#12928 = LINE('',#12929,#12930);+#12929 = CARTESIAN_POINT('',(0.,-0.1));+#12930 = VECTOR('',#12931,1.);+#12931 = DIRECTION('',(1.,0.));+#12932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12933 = ORIENTED_EDGE('',*,*,#12934,.T.);+#12934 = EDGE_CURVE('',#12912,#12935,#12937,.T.);+#12935 = VERTEX_POINT('',#12936);+#12936 = CARTESIAN_POINT('',(4.004120727529E-02,0.187416755247,2.0500001+ ));+#12937 = SURFACE_CURVE('',#12938,(#12942,#12949),.PCURVE_S1.);+#12938 = LINE('',#12939,#12940);+#12939 = CARTESIAN_POINT('',(-8.24729343879E-03,0.187416755247,2.0500001+ ));+#12940 = VECTOR('',#12941,1.);+#12941 = DIRECTION('',(1.,0.,0.));+#12942 = PCURVE('',#12758,#12943);+#12943 = DEFINITIONAL_REPRESENTATION('',(#12944),#12948);+#12944 = LINE('',#12945,#12946);+#12945 = CARTESIAN_POINT('',(0.139128254533,0.356904611713));+#12946 = VECTOR('',#12947,1.);+#12947 = DIRECTION('',(1.,0.));+#12948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12949 = PCURVE('',#7383,#12950);+#12950 = DEFINITIONAL_REPRESENTATION('',(#12951),#12955);+#12951 = LINE('',#12952,#12953);+#12952 = CARTESIAN_POINT('',(0.,-0.1));+#12953 = VECTOR('',#12954,1.);+#12954 = DIRECTION('',(1.,0.));+#12955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12956 = ORIENTED_EDGE('',*,*,#12957,.T.);+#12957 = EDGE_CURVE('',#12935,#12958,#12960,.T.);+#12958 = VERTEX_POINT('',#12959);+#12959 = CARTESIAN_POINT('',(4.004120727529E-02,-0.128849019232,+ 2.0500001));+#12960 = SURFACE_CURVE('',#12961,(#12965,#12972),.PCURVE_S1.);+#12961 = LINE('',#12962,#12963);+#12962 = CARTESIAN_POINT('',(4.004120727529E-02,0.187416755247,2.0500001+ ));+#12963 = VECTOR('',#12964,1.);+#12964 = DIRECTION('',(0.,-1.,0.));+#12965 = PCURVE('',#12758,#12966);+#12966 = DEFINITIONAL_REPRESENTATION('',(#12967),#12971);+#12967 = LINE('',#12968,#12969);+#12968 = CARTESIAN_POINT('',(0.187416755247,0.356904611713));+#12969 = VECTOR('',#12970,1.);+#12970 = DIRECTION('',(0.,-1.));+#12971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12972 = PCURVE('',#7410,#12973);+#12973 = DEFINITIONAL_REPRESENTATION('',(#12974),#12978);+#12974 = LINE('',#12975,#12976);+#12975 = CARTESIAN_POINT('',(0.,-0.1));+#12976 = VECTOR('',#12977,1.);+#12977 = DIRECTION('',(1.,0.));+#12978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12979 = ORIENTED_EDGE('',*,*,#12980,.T.);+#12980 = EDGE_CURVE('',#12958,#12720,#12981,.T.);+#12981 = SURFACE_CURVE('',#12982,(#12986,#12993),.PCURVE_S1.);+#12982 = LINE('',#12983,#12984);+#12983 = CARTESIAN_POINT('',(4.004120727529E-02,-0.128849019232,+ 2.0500001));+#12984 = VECTOR('',#12985,1.);+#12985 = DIRECTION('',(1.,0.,0.));+#12986 = PCURVE('',#12758,#12987);+#12987 = DEFINITIONAL_REPRESENTATION('',(#12988),#12992);+#12988 = LINE('',#12989,#12990);+#12989 = CARTESIAN_POINT('',(0.187416755247,4.063883723462E-02));+#12990 = VECTOR('',#12991,1.);+#12991 = DIRECTION('',(1.,0.));+#12992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12993 = PCURVE('',#7437,#12994);+#12994 = DEFINITIONAL_REPRESENTATION('',(#12995),#12999);+#12995 = LINE('',#12996,#12997);+#12996 = CARTESIAN_POINT('',(0.,-0.1));+#12997 = VECTOR('',#12998,1.);+#12998 = DIRECTION('',(1.,0.));+#12999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13000 = ORIENTED_EDGE('',*,*,#12742,.T.);+#13001 = ORIENTED_EDGE('',*,*,#13002,.T.);+#13002 = EDGE_CURVE('',#12743,#12795,#13003,.T.);+#13003 = SURFACE_CURVE('',#13004,(#13008,#13015),.PCURVE_S1.);+#13004 = LINE('',#13005,#13006);+#13005 = CARTESIAN_POINT('',(0.114147322233,-0.169487856467,2.0500001));+#13006 = VECTOR('',#13007,1.);+#13007 = DIRECTION('',(-1.,0.,0.));+#13008 = PCURVE('',#12758,#13009);+#13009 = DEFINITIONAL_REPRESENTATION('',(#13010),#13014);+#13010 = LINE('',#13011,#13012);+#13011 = CARTESIAN_POINT('',(0.261522870204,0.));+#13012 = VECTOR('',#13013,1.);+#13013 = DIRECTION('',(-1.,0.));+#13014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13015 = PCURVE('',#7194,#13016);+#13016 = DEFINITIONAL_REPRESENTATION('',(#13017),#13021);+#13017 = LINE('',#13018,#13019);+#13018 = CARTESIAN_POINT('',(0.,-0.1));+#13019 = VECTOR('',#13020,1.);+#13020 = DIRECTION('',(1.,0.));+#13021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13022 = ADVANCED_FACE('',(#13023),#7437,.T.);+#13023 = FACE_BOUND('',#13024,.T.);+#13024 = EDGE_LOOP('',(#13025,#13026,#13047,#13048));+#13025 = ORIENTED_EDGE('',*,*,#7421,.F.);+#13026 = ORIENTED_EDGE('',*,*,#13027,.T.);+#13027 = EDGE_CURVE('',#7395,#12958,#13028,.T.);+#13028 = SURFACE_CURVE('',#13029,(#13033,#13040),.PCURVE_S1.);+#13029 = LINE('',#13030,#13031);+#13030 = CARTESIAN_POINT('',(4.004120727529E-02,-0.128849019232,+ 2.1500001));+#13031 = VECTOR('',#13032,1.);+#13032 = DIRECTION('',(-0.,-0.,-1.));+#13033 = PCURVE('',#7437,#13034);+#13034 = DEFINITIONAL_REPRESENTATION('',(#13035),#13039);+#13035 = LINE('',#13036,#13037);+#13036 = CARTESIAN_POINT('',(0.,0.));+#13037 = VECTOR('',#13038,1.);+#13038 = DIRECTION('',(0.,-1.));+#13039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13040 = PCURVE('',#7410,#13041);+#13041 = DEFINITIONAL_REPRESENTATION('',(#13042),#13046);+#13042 = LINE('',#13043,#13044);+#13043 = CARTESIAN_POINT('',(0.316265774479,0.));+#13044 = VECTOR('',#13045,1.);+#13045 = DIRECTION('',(0.,-1.));+#13046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13047 = ORIENTED_EDGE('',*,*,#12980,.T.);+#13048 = ORIENTED_EDGE('',*,*,#12719,.F.);+#13049 = ADVANCED_FACE('',(#13050),#7410,.T.);+#13050 = FACE_BOUND('',#13051,.T.);+#13051 = EDGE_LOOP('',(#13052,#13053,#13074,#13075));+#13052 = ORIENTED_EDGE('',*,*,#7394,.F.);+#13053 = ORIENTED_EDGE('',*,*,#13054,.T.);+#13054 = EDGE_CURVE('',#7368,#12935,#13055,.T.);+#13055 = SURFACE_CURVE('',#13056,(#13060,#13067),.PCURVE_S1.);+#13056 = LINE('',#13057,#13058);+#13057 = CARTESIAN_POINT('',(4.004120727529E-02,0.187416755247,2.1500001+ ));+#13058 = VECTOR('',#13059,1.);+#13059 = DIRECTION('',(-0.,-0.,-1.));+#13060 = PCURVE('',#7410,#13061);+#13061 = DEFINITIONAL_REPRESENTATION('',(#13062),#13066);+#13062 = LINE('',#13063,#13064);+#13063 = CARTESIAN_POINT('',(0.,0.));+#13064 = VECTOR('',#13065,1.);+#13065 = DIRECTION('',(0.,-1.));+#13066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13067 = PCURVE('',#7383,#13068);+#13068 = DEFINITIONAL_REPRESENTATION('',(#13069),#13073);+#13069 = LINE('',#13070,#13071);+#13070 = CARTESIAN_POINT('',(4.828850071408E-02,0.));+#13071 = VECTOR('',#13072,1.);+#13072 = DIRECTION('',(0.,-1.));+#13073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13074 = ORIENTED_EDGE('',*,*,#12957,.T.);+#13075 = ORIENTED_EDGE('',*,*,#13027,.F.);+#13076 = ADVANCED_FACE('',(#13077),#7383,.T.);+#13077 = FACE_BOUND('',#13078,.T.);+#13078 = EDGE_LOOP('',(#13079,#13080,#13101,#13102));+#13079 = ORIENTED_EDGE('',*,*,#7367,.F.);+#13080 = ORIENTED_EDGE('',*,*,#13081,.T.);+#13081 = EDGE_CURVE('',#7341,#12912,#13082,.T.);+#13082 = SURFACE_CURVE('',#13083,(#13087,#13094),.PCURVE_S1.);+#13083 = LINE('',#13084,#13085);+#13084 = CARTESIAN_POINT('',(-8.24729343879E-03,0.187416755247,2.1500001+ ));+#13085 = VECTOR('',#13086,1.);+#13086 = DIRECTION('',(-0.,-0.,-1.));+#13087 = PCURVE('',#7383,#13088);+#13088 = DEFINITIONAL_REPRESENTATION('',(#13089),#13093);+#13089 = LINE('',#13090,#13091);+#13090 = CARTESIAN_POINT('',(0.,0.));+#13091 = VECTOR('',#13092,1.);+#13092 = DIRECTION('',(0.,-1.));+#13093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13094 = PCURVE('',#7356,#13095);+#13095 = DEFINITIONAL_REPRESENTATION('',(#13096),#13100);+#13096 = LINE('',#13097,#13098);+#13097 = CARTESIAN_POINT('',(8.224638998701E-02,0.));+#13098 = VECTOR('',#13099,1.);+#13099 = DIRECTION('',(0.,-1.));+#13100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13101 = ORIENTED_EDGE('',*,*,#12934,.T.);+#13102 = ORIENTED_EDGE('',*,*,#13054,.F.);+#13103 = ADVANCED_FACE('',(#13104),#7356,.T.);+#13104 = FACE_BOUND('',#13105,.T.);+#13105 = EDGE_LOOP('',(#13106,#13107,#13128,#13129));+#13106 = ORIENTED_EDGE('',*,*,#7340,.F.);+#13107 = ORIENTED_EDGE('',*,*,#13108,.T.);+#13108 = EDGE_CURVE('',#7314,#12889,#13109,.T.);+#13109 = SURFACE_CURVE('',#13110,(#13114,#13121),.PCURVE_S1.);+#13110 = LINE('',#13111,#13112);+#13111 = CARTESIAN_POINT('',(-8.856875997309E-02,0.16972690845,2.1500001+ ));+#13112 = VECTOR('',#13113,1.);+#13113 = DIRECTION('',(-0.,-0.,-1.));+#13114 = PCURVE('',#7356,#13115);+#13115 = DEFINITIONAL_REPRESENTATION('',(#13116),#13120);+#13116 = LINE('',#13117,#13118);+#13117 = CARTESIAN_POINT('',(0.,0.));+#13118 = VECTOR('',#13119,1.);+#13119 = DIRECTION('',(0.,-1.));+#13120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13121 = PCURVE('',#7329,#13122);+#13122 = DEFINITIONAL_REPRESENTATION('',(#13123),#13127);+#13123 = LINE('',#13124,#13125);+#13124 = CARTESIAN_POINT('',(4.398556500688E-02,0.));+#13125 = VECTOR('',#13126,1.);+#13126 = DIRECTION('',(0.,-1.));+#13127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13128 = ORIENTED_EDGE('',*,*,#12911,.T.);+#13129 = ORIENTED_EDGE('',*,*,#13081,.F.);+#13130 = ADVANCED_FACE('',(#13131),#7329,.T.);+#13131 = FACE_BOUND('',#13132,.T.);+#13132 = EDGE_LOOP('',(#13133,#13134,#13155,#13156));+#13133 = ORIENTED_EDGE('',*,*,#7313,.F.);+#13134 = ORIENTED_EDGE('',*,*,#13135,.T.);+#13135 = EDGE_CURVE('',#7287,#12866,#13136,.T.);+#13136 = SURFACE_CURVE('',#13137,(#13141,#13148),.PCURVE_S1.);+#13137 = LINE('',#13138,#13139);+#13138 = CARTESIAN_POINT('',(-8.856875997309E-02,0.125741343444,+ 2.1500001));+#13139 = VECTOR('',#13140,1.);+#13140 = DIRECTION('',(-0.,-0.,-1.));+#13141 = PCURVE('',#7329,#13142);+#13142 = DEFINITIONAL_REPRESENTATION('',(#13143),#13147);+#13143 = LINE('',#13144,#13145);+#13144 = CARTESIAN_POINT('',(0.,0.));+#13145 = VECTOR('',#13146,1.);+#13146 = DIRECTION('',(0.,-1.));+#13147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13148 = PCURVE('',#7302,#13149);+#13149 = DEFINITIONAL_REPRESENTATION('',(#13150),#13154);+#13150 = LINE('',#13151,#13152);+#13151 = CARTESIAN_POINT('',(8.2816936844E-02,0.));+#13152 = VECTOR('',#13153,1.);+#13153 = DIRECTION('',(0.,-1.));+#13154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13155 = ORIENTED_EDGE('',*,*,#12888,.T.);+#13156 = ORIENTED_EDGE('',*,*,#13108,.F.);+#13157 = ADVANCED_FACE('',(#13158),#7302,.T.);+#13158 = FACE_BOUND('',#13159,.T.);+#13159 = EDGE_LOOP('',(#13160,#13161,#13182,#13183));+#13160 = ORIENTED_EDGE('',*,*,#7286,.F.);+#13161 = ORIENTED_EDGE('',*,*,#13162,.T.);+#13162 = EDGE_CURVE('',#7260,#12843,#13163,.T.);+#13163 = SURFACE_CURVE('',#13164,(#13168,#13175),.PCURVE_S1.);+#13164 = LINE('',#13165,#13166);+#13165 = CARTESIAN_POINT('',(-7.769189471324E-03,0.143909294207,+ 2.1500001));+#13166 = VECTOR('',#13167,1.);+#13167 = DIRECTION('',(-0.,-0.,-1.));+#13168 = PCURVE('',#7302,#13169);+#13169 = DEFINITIONAL_REPRESENTATION('',(#13170),#13174);+#13170 = LINE('',#13171,#13172);+#13171 = CARTESIAN_POINT('',(0.,0.));+#13172 = VECTOR('',#13173,1.);+#13173 = DIRECTION('',(0.,-1.));+#13174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13175 = PCURVE('',#7275,#13176);+#13176 = DEFINITIONAL_REPRESENTATION('',(#13177),#13181);+#13177 = LINE('',#13178,#13179);+#13178 = CARTESIAN_POINT('',(0.272758313439,0.));+#13179 = VECTOR('',#13180,1.);+#13180 = DIRECTION('',(0.,-1.));+#13181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13182 = ORIENTED_EDGE('',*,*,#12865,.T.);+#13183 = ORIENTED_EDGE('',*,*,#13135,.F.);+#13184 = ADVANCED_FACE('',(#13185),#7275,.T.);+#13185 = FACE_BOUND('',#13186,.T.);+#13186 = EDGE_LOOP('',(#13187,#13188,#13209,#13210));+#13187 = ORIENTED_EDGE('',*,*,#7259,.F.);+#13188 = ORIENTED_EDGE('',*,*,#13189,.T.);+#13189 = EDGE_CURVE('',#7233,#12820,#13190,.T.);+#13190 = SURFACE_CURVE('',#13191,(#13195,#13202),.PCURVE_S1.);+#13191 = LINE('',#13192,#13193);+#13192 = CARTESIAN_POINT('',(-7.769189471324E-03,-0.128849019232,+ 2.1500001));+#13193 = VECTOR('',#13194,1.);+#13194 = DIRECTION('',(-0.,-0.,-1.));+#13195 = PCURVE('',#7275,#13196);+#13196 = DEFINITIONAL_REPRESENTATION('',(#13197),#13201);+#13197 = LINE('',#13198,#13199);+#13198 = CARTESIAN_POINT('',(0.,0.));+#13199 = VECTOR('',#13200,1.);+#13200 = DIRECTION('',(0.,-1.));+#13201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13202 = PCURVE('',#7248,#13203);+#13203 = DEFINITIONAL_REPRESENTATION('',(#13204),#13208);+#13204 = LINE('',#13205,#13206);+#13205 = CARTESIAN_POINT('',(7.506232289218E-02,0.));+#13206 = VECTOR('',#13207,1.);+#13207 = DIRECTION('',(0.,-1.));+#13208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13209 = ORIENTED_EDGE('',*,*,#12842,.T.);+#13210 = ORIENTED_EDGE('',*,*,#13162,.F.);+#13211 = ADVANCED_FACE('',(#13212),#7248,.T.);+#13212 = FACE_BOUND('',#13213,.T.);+#13213 = EDGE_LOOP('',(#13214,#13215,#13236,#13237));+#13214 = ORIENTED_EDGE('',*,*,#7232,.F.);+#13215 = ORIENTED_EDGE('',*,*,#13216,.T.);+#13216 = EDGE_CURVE('',#7206,#12797,#13217,.T.);+#13217 = SURFACE_CURVE('',#13218,(#13222,#13229),.PCURVE_S1.);+#13218 = LINE('',#13219,#13220);+#13219 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.128849019232,+ 2.1500001));+#13220 = VECTOR('',#13221,1.);+#13221 = DIRECTION('',(-0.,-0.,-1.));+#13222 = PCURVE('',#7248,#13223);+#13223 = DEFINITIONAL_REPRESENTATION('',(#13224),#13228);+#13224 = LINE('',#13225,#13226);+#13225 = CARTESIAN_POINT('',(0.,0.));+#13226 = VECTOR('',#13227,1.);+#13227 = DIRECTION('',(0.,-1.));+#13228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13229 = PCURVE('',#7221,#13230);+#13230 = DEFINITIONAL_REPRESENTATION('',(#13231),#13235);+#13231 = LINE('',#13232,#13233);+#13232 = CARTESIAN_POINT('',(4.063883723462E-02,0.));+#13233 = VECTOR('',#13234,1.);+#13234 = DIRECTION('',(0.,-1.));+#13235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13236 = ORIENTED_EDGE('',*,*,#12819,.T.);+#13237 = ORIENTED_EDGE('',*,*,#13189,.F.);+#13238 = ADVANCED_FACE('',(#13239),#7221,.T.);+#13239 = FACE_BOUND('',#13240,.T.);+#13240 = EDGE_LOOP('',(#13241,#13242,#13263,#13264));+#13241 = ORIENTED_EDGE('',*,*,#7205,.F.);+#13242 = ORIENTED_EDGE('',*,*,#13243,.T.);+#13243 = EDGE_CURVE('',#7179,#12795,#13244,.T.);+#13244 = SURFACE_CURVE('',#13245,(#13249,#13256),.PCURVE_S1.);+#13245 = LINE('',#13246,#13247);+#13246 = CARTESIAN_POINT('',(-8.28315123635E-02,-0.169487856467,+ 2.1500001));+#13247 = VECTOR('',#13248,1.);+#13248 = DIRECTION('',(-0.,-0.,-1.));+#13249 = PCURVE('',#7221,#13250);+#13250 = DEFINITIONAL_REPRESENTATION('',(#13251),#13255);+#13251 = LINE('',#13252,#13253);+#13252 = CARTESIAN_POINT('',(0.,0.));+#13253 = VECTOR('',#13254,1.);+#13254 = DIRECTION('',(0.,-1.));+#13255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13256 = PCURVE('',#7194,#13257);+#13257 = DEFINITIONAL_REPRESENTATION('',(#13258),#13262);+#13258 = LINE('',#13259,#13260);+#13259 = CARTESIAN_POINT('',(0.196978834596,0.));+#13260 = VECTOR('',#13261,1.);+#13261 = DIRECTION('',(0.,-1.));+#13262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13263 = ORIENTED_EDGE('',*,*,#12794,.T.);+#13264 = ORIENTED_EDGE('',*,*,#13216,.F.);+#13265 = ADVANCED_FACE('',(#13266),#7194,.T.);+#13266 = FACE_BOUND('',#13267,.T.);+#13267 = EDGE_LOOP('',(#13268,#13269,#13270,#13271));+#13268 = ORIENTED_EDGE('',*,*,#7176,.F.);+#13269 = ORIENTED_EDGE('',*,*,#12770,.T.);+#13270 = ORIENTED_EDGE('',*,*,#13002,.T.);+#13271 = ORIENTED_EDGE('',*,*,#13243,.F.);+#13272 = ADVANCED_FACE('',(#13273),#7158,.T.);+#13273 = FACE_BOUND('',#13274,.T.);+#13274 = EDGE_LOOP('',(#13275,#13276,#13299,#13327));+#13275 = ORIENTED_EDGE('',*,*,#7140,.T.);+#13276 = ORIENTED_EDGE('',*,*,#13277,.T.);+#13277 = EDGE_CURVE('',#7096,#13278,#13280,.T.);+#13278 = VERTEX_POINT('',#13279);+#13279 = CARTESIAN_POINT('',(-0.274790255301,0.193871158808,2.0500001));+#13280 = SURFACE_CURVE('',#13281,(#13285,#13292),.PCURVE_S1.);+#13281 = LINE('',#13282,#13283);+#13282 = CARTESIAN_POINT('',(-0.274790255301,0.193871158808,2.1500001));+#13283 = VECTOR('',#13284,1.);+#13284 = DIRECTION('',(-0.,-0.,-1.));+#13285 = PCURVE('',#7158,#13286);+#13286 = DEFINITIONAL_REPRESENTATION('',(#13287),#13291);+#13287 = LINE('',#13288,#13289);+#13288 = CARTESIAN_POINT('',(0.,0.));+#13289 = VECTOR('',#13290,1.);+#13290 = DIRECTION('',(0.,-1.));+#13291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13292 = PCURVE('',#7121,#13293);+#13293 = DEFINITIONAL_REPRESENTATION('',(#13294),#13298);+#13294 = LINE('',#13295,#13296);+#13295 = CARTESIAN_POINT('',(1.,0.));+#13296 = VECTOR('',#13297,1.);+#13297 = DIRECTION('',(0.,-1.));+#13298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13299 = ORIENTED_EDGE('',*,*,#13300,.T.);+#13300 = EDGE_CURVE('',#13278,#13301,#13303,.T.);+#13301 = VERTEX_POINT('',#13302);+#13302 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.0500001));+#13303 = SURFACE_CURVE('',#13304,(#13308,#13315),.PCURVE_S1.);+#13304 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13305,#13306,#13307),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13305 = CARTESIAN_POINT('',(-0.274790255301,0.193871158808,2.0500001));+#13306 = CARTESIAN_POINT('',(-0.257100408505,0.193871158808,2.0500001));+#13307 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.0500001));+#13308 = PCURVE('',#7158,#13309);+#13309 = DEFINITIONAL_REPRESENTATION('',(#13310),#13314);+#13310 = LINE('',#13311,#13312);+#13311 = CARTESIAN_POINT('',(0.,-0.1));+#13312 = VECTOR('',#13313,1.);+#13313 = DIRECTION('',(1.,0.));+#13314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13315 = PCURVE('',#13316,#13321);+#13316 = PLANE('',#13317);+#13317 = AXIS2_PLACEMENT_3D('',#13318,#13319,#13320);+#13318 = CARTESIAN_POINT('',(-0.442126643914,-0.169487856467,2.0500001)+ );+#13319 = DIRECTION('',(0.,0.,1.));+#13320 = DIRECTION('',(1.,0.,0.));+#13321 = DEFINITIONAL_REPRESENTATION('',(#13322),#13326);+#13322 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13323,#13324,#13325),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13323 = CARTESIAN_POINT('',(0.167336388613,0.363359015274));+#13324 = CARTESIAN_POINT('',(0.185026235409,0.363359015274));+#13325 = CARTESIAN_POINT('',(0.202716082206,0.359653709526));+#13326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13327 = ORIENTED_EDGE('',*,*,#13328,.F.);+#13328 = EDGE_CURVE('',#6517,#13301,#13329,.T.);+#13329 = SURFACE_CURVE('',#13330,(#13334,#13341),.PCURVE_S1.);+#13330 = LINE('',#13331,#13332);+#13331 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.1500001));+#13332 = VECTOR('',#13333,1.);+#13333 = DIRECTION('',(-0.,-0.,-1.));+#13334 = PCURVE('',#7158,#13335);+#13335 = DEFINITIONAL_REPRESENTATION('',(#13336),#13340);+#13336 = LINE('',#13337,#13338);+#13337 = CARTESIAN_POINT('',(1.,0.));+#13338 = VECTOR('',#13339,1.);+#13339 = DIRECTION('',(0.,-1.));+#13340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13341 = PCURVE('',#6536,#13342);+#13342 = DEFINITIONAL_REPRESENTATION('',(#13343),#13347);+#13343 = LINE('',#13344,#13345);+#13344 = CARTESIAN_POINT('',(0.,0.));+#13345 = VECTOR('',#13346,1.);+#13346 = DIRECTION('',(0.,-1.));+#13347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13348 = ADVANCED_FACE('',(#13349,#13718),#13316,.T.);+#13349 = FACE_BOUND('',#13350,.F.);+#13350 = EDGE_LOOP('',(#13351,#13376,#13399,#13422,#13445,#13468,#13491,+ #13514,#13537,#13560,#13583,#13606,#13629,#13652,#13675,#13696,+ #13697));+#13351 = ORIENTED_EDGE('',*,*,#13352,.T.);+#13352 = EDGE_CURVE('',#13353,#13355,#13357,.T.);+#13353 = VERTEX_POINT('',#13354);+#13354 = CARTESIAN_POINT('',(-0.205226128035,0.179528039784,2.0500001));+#13355 = VERTEX_POINT('',#13356);+#13356 = CARTESIAN_POINT('',(-0.205226128035,0.135064370809,2.0500001));+#13357 = SURFACE_CURVE('',#13358,(#13362,#13369),.PCURVE_S1.);+#13358 = LINE('',#13359,#13360);+#13359 = CARTESIAN_POINT('',(-0.205226128035,0.179528039784,2.0500001));+#13360 = VECTOR('',#13361,1.);+#13361 = DIRECTION('',(0.,-1.,0.));+#13362 = PCURVE('',#13316,#13363);+#13363 = DEFINITIONAL_REPRESENTATION('',(#13364),#13368);+#13364 = LINE('',#13365,#13366);+#13365 = CARTESIAN_POINT('',(0.236900515879,0.34901589625));+#13366 = VECTOR('',#13367,1.);+#13367 = DIRECTION('',(0.,-1.));+#13368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13369 = PCURVE('',#6568,#13370);+#13370 = DEFINITIONAL_REPRESENTATION('',(#13371),#13375);+#13371 = LINE('',#13372,#13373);+#13372 = CARTESIAN_POINT('',(0.,-0.1));+#13373 = VECTOR('',#13374,1.);+#13374 = DIRECTION('',(1.,0.));+#13375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13376 = ORIENTED_EDGE('',*,*,#13377,.T.);+#13377 = EDGE_CURVE('',#13355,#13378,#13380,.T.);+#13378 = VERTEX_POINT('',#13379);+#13379 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.0500001));+#13380 = SURFACE_CURVE('',#13381,(#13385,#13392),.PCURVE_S1.);+#13381 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13382,#13383,#13384),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13382 = CARTESIAN_POINT('',(-0.205226128035,0.135064370809,2.0500001));+#13383 = CARTESIAN_POINT('',(-0.22028640301,0.143909294207,2.0500001));+#13384 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.0500001));+#13385 = PCURVE('',#13316,#13386);+#13386 = DEFINITIONAL_REPRESENTATION('',(#13387),#13391);+#13387 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13388,#13389,#13390),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13388 = CARTESIAN_POINT('',(0.236900515879,0.304552227276));+#13389 = CARTESIAN_POINT('',(0.221840240904,0.313397150674));+#13390 = CARTESIAN_POINT('',(0.204867550059,0.318058664357));+#13391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13392 = PCURVE('',#6599,#13393);+#13393 = DEFINITIONAL_REPRESENTATION('',(#13394),#13398);+#13394 = LINE('',#13395,#13396);+#13395 = CARTESIAN_POINT('',(0.,-0.1));+#13396 = VECTOR('',#13397,1.);+#13397 = DIRECTION('',(1.,0.));+#13398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13399 = ORIENTED_EDGE('',*,*,#13400,.T.);+#13400 = EDGE_CURVE('',#13378,#13401,#13403,.T.);+#13401 = VERTEX_POINT('',#13402);+#13402 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.0500001));+#13403 = SURFACE_CURVE('',#13404,(#13408,#13415),.PCURVE_S1.);+#13404 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13405,#13406,#13407),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13405 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.0500001));+#13406 = CARTESIAN_POINT('',(-0.2542317847,0.153232321573,2.0500001));+#13407 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.0500001));+#13408 = PCURVE('',#13316,#13409);+#13409 = DEFINITIONAL_REPRESENTATION('',(#13410),#13414);+#13410 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13411,#13412,#13413),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13411 = CARTESIAN_POINT('',(0.204867550059,0.318058664357));+#13412 = CARTESIAN_POINT('',(0.187894859214,0.32272017804));+#13413 = CARTESIAN_POINT('',(0.169487856467,0.32272017804));+#13414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13415 = PCURVE('',#6635,#13416);+#13416 = DEFINITIONAL_REPRESENTATION('',(#13417),#13421);+#13417 = LINE('',#13418,#13419);+#13418 = CARTESIAN_POINT('',(0.,-0.1));+#13419 = VECTOR('',#13420,1.);+#13420 = DIRECTION('',(1.,0.));+#13421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13422 = ORIENTED_EDGE('',*,*,#13423,.T.);+#13423 = EDGE_CURVE('',#13401,#13424,#13426,.T.);+#13424 = VERTEX_POINT('',#13425);+#13425 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.0500001));+#13426 = SURFACE_CURVE('',#13427,(#13431,#13438),.PCURVE_S1.);+#13427 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13428,#13429,#13430),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13428 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.0500001));+#13429 = CARTESIAN_POINT('',(-0.318536768324,0.153232321573,2.0500001));+#13430 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.0500001));+#13431 = PCURVE('',#13316,#13432);+#13432 = DEFINITIONAL_REPRESENTATION('',(#13433),#13437);+#13433 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13434,#13435,#13436),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13434 = CARTESIAN_POINT('',(0.169487856467,0.32272017804));+#13435 = CARTESIAN_POINT('',(0.12358987559,0.32272017804));+#13436 = CARTESIAN_POINT('',(9.992372920041E-02,0.28817716639));+#13437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13438 = PCURVE('',#6677,#13439);+#13439 = DEFINITIONAL_REPRESENTATION('',(#13440),#13444);+#13440 = LINE('',#13441,#13442);+#13441 = CARTESIAN_POINT('',(0.,-0.1));+#13442 = VECTOR('',#13443,1.);+#13443 = DIRECTION('',(1.,0.));+#13444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13445 = ORIENTED_EDGE('',*,*,#13446,.T.);+#13446 = EDGE_CURVE('',#13424,#13447,#13449,.T.);+#13447 = VERTEX_POINT('',#13448);+#13448 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,+ 2.0500001));+#13449 = SURFACE_CURVE('',#13450,(#13454,#13461),.PCURVE_S1.);+#13450 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13451,#13452,#13453),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13451 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.0500001));+#13452 = CARTESIAN_POINT('',(-0.365869061103,8.414629827403E-02,+ 2.0500001));+#13453 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,+ 2.0500001));+#13454 = PCURVE('',#13316,#13455);+#13455 = DEFINITIONAL_REPRESENTATION('',(#13456),#13460);+#13456 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13457,#13458,#13459),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13457 = CARTESIAN_POINT('',(9.992372920041E-02,0.28817716639));+#13458 = CARTESIAN_POINT('',(7.625758281084E-02,0.253634154741));+#13459 = CARTESIAN_POINT('',(7.625758281084E-02,0.186460547312));+#13460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13461 = PCURVE('',#6716,#13462);+#13462 = DEFINITIONAL_REPRESENTATION('',(#13463),#13467);+#13463 = LINE('',#13464,#13465);+#13464 = CARTESIAN_POINT('',(0.,-0.1));+#13465 = VECTOR('',#13466,1.);+#13466 = DIRECTION('',(1.,0.));+#13467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13468 = ORIENTED_EDGE('',*,*,#13469,.T.);+#13469 = EDGE_CURVE('',#13447,#13470,#13472,.T.);+#13470 = VERTEX_POINT('',#13471);+#13471 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,+ 2.0500001));+#13472 = SURFACE_CURVE('',#13473,(#13477,#13484),.PCURVE_S1.);+#13473 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13474,#13475,#13476),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13474 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,+ 2.0500001));+#13475 = CARTESIAN_POINT('',(-0.354394565884,4.087788921835E-02,+ 2.0500001));+#13476 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,+ 2.0500001));+#13477 = PCURVE('',#13316,#13478);+#13478 = DEFINITIONAL_REPRESENTATION('',(#13479),#13483);+#13479 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13480,#13481,#13482),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13480 = CARTESIAN_POINT('',(7.625758281084E-02,0.186460547312));+#13481 = CARTESIAN_POINT('',(8.773207803003E-02,0.210365745685));+#13482 = CARTESIAN_POINT('',(0.108051496647,0.223155026815));+#13483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13484 = PCURVE('',#6758,#13485);+#13485 = DEFINITIONAL_REPRESENTATION('',(#13486),#13490);+#13486 = LINE('',#13487,#13488);+#13487 = CARTESIAN_POINT('',(0.,-0.1));+#13488 = VECTOR('',#13489,1.);+#13489 = DIRECTION('',(1.,0.));+#13490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13491 = ORIENTED_EDGE('',*,*,#13492,.T.);+#13492 = EDGE_CURVE('',#13470,#13493,#13495,.T.);+#13493 = VERTEX_POINT('',#13494);+#13494 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,+ 2.0500001));+#13495 = SURFACE_CURVE('',#13496,(#13500,#13507),.PCURVE_S1.);+#13496 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13497,#13498,#13499),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13497 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,+ 2.0500001));+#13498 = CARTESIAN_POINT('',(-0.31375572865,6.645645147779E-02,2.0500001+ ));+#13499 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,+ 2.0500001));+#13500 = PCURVE('',#13316,#13501);+#13501 = DEFINITIONAL_REPRESENTATION('',(#13502),#13506);+#13502 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13503,#13504,#13505),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13503 = CARTESIAN_POINT('',(0.108051496647,0.223155026815));+#13504 = CARTESIAN_POINT('',(0.128370915265,0.235944307945));+#13505 = CARTESIAN_POINT('',(0.154666633475,0.235944307945));+#13506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13507 = PCURVE('',#6797,#13508);+#13508 = DEFINITIONAL_REPRESENTATION('',(#13509),#13513);+#13509 = LINE('',#13510,#13511);+#13510 = CARTESIAN_POINT('',(0.,-0.1));+#13511 = VECTOR('',#13512,1.);+#13512 = DIRECTION('',(1.,0.));+#13513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13514 = ORIENTED_EDGE('',*,*,#13515,.T.);+#13515 = EDGE_CURVE('',#13493,#13516,#13518,.T.);+#13516 = VERTEX_POINT('',#13517);+#13517 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.0500001+ ));+#13518 = SURFACE_CURVE('',#13519,(#13523,#13530),.PCURVE_S1.);+#13519 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13520,#13521,#13522),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13520 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,+ 2.0500001));+#13521 = CARTESIAN_POINT('',(-0.235824781953,6.645645147779E-02,+ 2.0500001));+#13522 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.0500001+ ));+#13523 = PCURVE('',#13316,#13524);+#13524 = DEFINITIONAL_REPRESENTATION('',(#13525),#13529);+#13525 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13526,#13527,#13528),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13526 = CARTESIAN_POINT('',(0.154666633475,0.235944307945));+#13527 = CARTESIAN_POINT('',(0.206301861962,0.235944307945));+#13528 = CARTESIAN_POINT('',(0.234629522034,0.2042699201));+#13529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13530 = PCURVE('',#6839,#13531);+#13531 = DEFINITIONAL_REPRESENTATION('',(#13532),#13536);+#13532 = LINE('',#13533,#13534);+#13533 = CARTESIAN_POINT('',(0.,-0.1));+#13534 = VECTOR('',#13535,1.);+#13535 = DIRECTION('',(1.,0.));+#13536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13537 = ORIENTED_EDGE('',*,*,#13538,.T.);+#13538 = EDGE_CURVE('',#13516,#13539,#13541,.T.);+#13539 = VERTEX_POINT('',#13540);+#13540 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,+ 2.0500001));+#13541 = SURFACE_CURVE('',#13542,(#13546,#13553),.PCURVE_S1.);+#13542 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13543,#13544,#13545),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13543 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.0500001+ ));+#13544 = CARTESIAN_POINT('',(-0.179169461808,3.10767578853E-03,2.0500001+ ));+#13545 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,+ 2.0500001));+#13546 = PCURVE('',#13316,#13547);+#13547 = DEFINITIONAL_REPRESENTATION('',(#13548),#13552);+#13548 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13549,#13550,#13551),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13549 = CARTESIAN_POINT('',(0.234629522034,0.2042699201));+#13550 = CARTESIAN_POINT('',(0.262957182106,0.172595532255));+#13551 = CARTESIAN_POINT('',(0.262957182106,0.114505900208));+#13552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13553 = PCURVE('',#6878,#13554);+#13554 = DEFINITIONAL_REPRESENTATION('',(#13555),#13559);+#13555 = LINE('',#13556,#13557);+#13556 = CARTESIAN_POINT('',(0.,-0.1));+#13557 = VECTOR('',#13558,1.);+#13558 = DIRECTION('',(1.,0.));+#13559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13560 = ORIENTED_EDGE('',*,*,#13561,.T.);+#13561 = EDGE_CURVE('',#13539,#13562,#13564,.T.);+#13562 = VERTEX_POINT('',#13563);+#13563 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.0500001)+ );+#13564 = SURFACE_CURVE('',#13565,(#13569,#13576),.PCURVE_S1.);+#13565 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13566,#13567,#13568),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13566 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,+ 2.0500001));+#13567 = CARTESIAN_POINT('',(-0.179169461808,-0.112832536322,2.0500001)+ );+#13568 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.0500001)+ );+#13569 = PCURVE('',#13316,#13570);+#13570 = DEFINITIONAL_REPRESENTATION('',(#13571),#13575);+#13571 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13572,#13573,#13574),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13572 = CARTESIAN_POINT('',(0.262957182106,0.114505900208));+#13573 = CARTESIAN_POINT('',(0.262957182106,5.665532014473E-02));+#13574 = CARTESIAN_POINT('',(0.233792840091,2.486140630824E-02));+#13575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13576 = PCURVE('',#6914,#13577);+#13577 = DEFINITIONAL_REPRESENTATION('',(#13578),#13582);+#13578 = LINE('',#13579,#13580);+#13579 = CARTESIAN_POINT('',(0.,-0.1));+#13580 = VECTOR('',#13581,1.);+#13581 = DIRECTION('',(1.,0.));+#13582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13583 = ORIENTED_EDGE('',*,*,#13584,.T.);+#13584 = EDGE_CURVE('',#13562,#13585,#13587,.T.);+#13585 = VERTEX_POINT('',#13586);+#13586 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.0500001)+ );+#13587 = SURFACE_CURVE('',#13588,(#13592,#13599),.PCURVE_S1.);+#13588 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13589,#13590,#13591),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13589 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.0500001)+ );+#13590 = CARTESIAN_POINT('',(-0.237498145839,-0.176420363995,2.0500001)+ );+#13591 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.0500001)+ );+#13592 = PCURVE('',#13316,#13593);+#13593 = DEFINITIONAL_REPRESENTATION('',(#13594),#13598);+#13594 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13595,#13596,#13597),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13595 = CARTESIAN_POINT('',(0.233792840091,2.486140630824E-02));+#13596 = CARTESIAN_POINT('',(0.204628498075,-6.932507528258E-03));+#13597 = CARTESIAN_POINT('',(0.15179800967,-6.932507528258E-03));+#13598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13599 = PCURVE('',#6956,#13600);+#13600 = DEFINITIONAL_REPRESENTATION('',(#13601),#13605);+#13601 = LINE('',#13602,#13603);+#13602 = CARTESIAN_POINT('',(0.,-0.1));+#13603 = VECTOR('',#13604,1.);+#13604 = DIRECTION('',(1.,0.));+#13605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13606 = ORIENTED_EDGE('',*,*,#13607,.T.);+#13607 = EDGE_CURVE('',#13585,#13608,#13610,.T.);+#13608 = VERTEX_POINT('',#13609);+#13609 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.0500001)+ );+#13610 = SURFACE_CURVE('',#13611,(#13615,#13622),.PCURVE_S1.);+#13611 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13612,#13613,#13614),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13612 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.0500001)+ );+#13613 = CARTESIAN_POINT('',(-0.352482150014,-0.176420363995,2.0500001)+ );+#13614 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.0500001)+ );+#13615 = PCURVE('',#13316,#13616);+#13616 = DEFINITIONAL_REPRESENTATION('',(#13617),#13621);+#13617 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13618,#13619,#13620),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13618 = CARTESIAN_POINT('',(0.15179800967,-6.932507528258E-03));+#13619 = CARTESIAN_POINT('',(8.964449389989E-02,-6.932507528258E-03));+#13620 = CARTESIAN_POINT('',(6.071920386819E-02,3.765068743795E-02));+#13621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13622 = PCURVE('',#7001,#13623);+#13623 = DEFINITIONAL_REPRESENTATION('',(#13624),#13628);+#13624 = LINE('',#13625,#13626);+#13625 = CARTESIAN_POINT('',(0.,-0.1));+#13626 = VECTOR('',#13627,1.);+#13627 = DIRECTION('',(1.,0.));+#13628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13629 = ORIENTED_EDGE('',*,*,#13630,.T.);+#13630 = EDGE_CURVE('',#13608,#13631,#13633,.T.);+#13631 = VERTEX_POINT('',#13632);+#13632 = CARTESIAN_POINT('',(-0.410332730078,8.60587141439E-03,2.0500001+ ));+#13633 = SURFACE_CURVE('',#13634,(#13638,#13645),.PCURVE_S1.);+#13634 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13635,#13636,#13637),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13635 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.0500001)+ );+#13636 = CARTESIAN_POINT('',(-0.410332730078,-8.725397406256E-02,+ 2.0500001));+#13637 = CARTESIAN_POINT('',(-0.410332730078,8.60587141439E-03,2.0500001+ ));+#13638 = PCURVE('',#13316,#13639);+#13639 = DEFINITIONAL_REPRESENTATION('',(#13640),#13644);+#13640 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13641,#13642,#13643),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13641 = CARTESIAN_POINT('',(6.071920386819E-02,3.765068743795E-02));+#13642 = CARTESIAN_POINT('',(3.17939138365E-02,8.223388240417E-02));+#13643 = CARTESIAN_POINT('',(3.17939138365E-02,0.178093727881));+#13644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13645 = PCURVE('',#7042,#13646);+#13646 = DEFINITIONAL_REPRESENTATION('',(#13647),#13651);+#13647 = LINE('',#13648,#13649);+#13648 = CARTESIAN_POINT('',(0.,-0.1));+#13649 = VECTOR('',#13650,1.);+#13650 = DIRECTION('',(1.,0.));+#13651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13652 = ORIENTED_EDGE('',*,*,#13653,.T.);+#13653 = EDGE_CURVE('',#13631,#13654,#13656,.T.);+#13654 = VERTEX_POINT('',#13655);+#13655 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.0500001));+#13656 = SURFACE_CURVE('',#13657,(#13661,#13668),.PCURVE_S1.);+#13657 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13658,#13659,#13660),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13658 = CARTESIAN_POINT('',(-0.410332730078,8.60587141439E-03,2.0500001+ ));+#13659 = CARTESIAN_POINT('',(-0.410332730078,9.896752126548E-02,+ 2.0500001));+#13660 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.0500001));+#13661 = PCURVE('',#13316,#13662);+#13662 = DEFINITIONAL_REPRESENTATION('',(#13663),#13667);+#13663 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13664,#13665,#13666),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13664 = CARTESIAN_POINT('',(3.17939138365E-02,0.178093727881));+#13665 = CARTESIAN_POINT('',(3.17939138365E-02,0.268455377732));+#13666 = CARTESIAN_POINT('',(6.657597746965E-02,0.315907196503));+#13667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13668 = PCURVE('',#7079,#13669);+#13669 = DEFINITIONAL_REPRESENTATION('',(#13670),#13674);+#13670 = LINE('',#13671,#13672);+#13671 = CARTESIAN_POINT('',(0.,-0.1));+#13672 = VECTOR('',#13673,1.);+#13673 = DIRECTION('',(1.,0.));+#13674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13675 = ORIENTED_EDGE('',*,*,#13676,.T.);+#13676 = EDGE_CURVE('',#13654,#13278,#13677,.T.);+#13677 = SURFACE_CURVE('',#13678,(#13682,#13689),.PCURVE_S1.);+#13678 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13679,#13680,#13681),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13679 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.0500001));+#13680 = CARTESIAN_POINT('',(-0.340768602811,0.193871158808,2.0500001));+#13681 = CARTESIAN_POINT('',(-0.274790255301,0.193871158808,2.0500001));+#13682 = PCURVE('',#13316,#13683);+#13683 = DEFINITIONAL_REPRESENTATION('',(#13684),#13688);+#13684 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13685,#13686,#13687),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13685 = CARTESIAN_POINT('',(6.657597746965E-02,0.315907196503));+#13686 = CARTESIAN_POINT('',(0.101358041103,0.363359015274));+#13687 = CARTESIAN_POINT('',(0.167336388613,0.363359015274));+#13688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13689 = PCURVE('',#7121,#13690);+#13690 = DEFINITIONAL_REPRESENTATION('',(#13691),#13695);+#13691 = LINE('',#13692,#13693);+#13692 = CARTESIAN_POINT('',(0.,-0.1));+#13693 = VECTOR('',#13694,1.);+#13694 = DIRECTION('',(1.,0.));+#13695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13696 = ORIENTED_EDGE('',*,*,#13300,.T.);+#13697 = ORIENTED_EDGE('',*,*,#13698,.T.);+#13698 = EDGE_CURVE('',#13301,#13353,#13699,.T.);+#13699 = SURFACE_CURVE('',#13700,(#13704,#13711),.PCURVE_S1.);+#13700 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13701,#13702,#13703),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13701 = CARTESIAN_POINT('',(-0.239410561709,0.19016585306,2.0500001));+#13702 = CARTESIAN_POINT('',(-0.221720714912,0.186460547312,2.0500001));+#13703 = CARTESIAN_POINT('',(-0.205226128035,0.179528039784,2.0500001));+#13704 = PCURVE('',#13316,#13705);+#13705 = DEFINITIONAL_REPRESENTATION('',(#13706),#13710);+#13706 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13707,#13708,#13709),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13707 = CARTESIAN_POINT('',(0.202716082206,0.359653709526));+#13708 = CARTESIAN_POINT('',(0.220405929002,0.355948403779));+#13709 = CARTESIAN_POINT('',(0.236900515879,0.34901589625));+#13710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13711 = PCURVE('',#6536,#13712);+#13712 = DEFINITIONAL_REPRESENTATION('',(#13713),#13717);+#13713 = LINE('',#13714,#13715);+#13714 = CARTESIAN_POINT('',(0.,-0.1));+#13715 = VECTOR('',#13716,1.);+#13716 = DIRECTION('',(1.,0.));+#13717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13718 = FACE_BOUND('',#13719,.F.);+#13719 = EDGE_LOOP('',(#13720,#13752,#13782,#13812,#13842,#13872,#13902,+ #13932));+#13720 = ORIENTED_EDGE('',*,*,#13721,.T.);+#13721 = EDGE_CURVE('',#13722,#13724,#13726,.T.);+#13722 = VERTEX_POINT('',#13723);+#13723 = CARTESIAN_POINT('',(-0.291284842179,2.868623804797E-02,+ 2.0500001));+#13724 = VERTEX_POINT('',#13725);+#13725 = CARTESIAN_POINT('',(-0.339812394877,6.454403560792E-03,+ 2.0500001));+#13726 = SURFACE_CURVE('',#13727,(#13731,#13738),.PCURVE_S1.);+#13727 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13728,#13729,#13730),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13728 = CARTESIAN_POINT('',(-0.291284842179,2.868623804797E-02,+ 2.0500001));+#13729 = CARTESIAN_POINT('',(-0.32212254808,2.868623804797E-02,2.0500001+ ));+#13730 = CARTESIAN_POINT('',(-0.339812394877,6.454403560792E-03,+ 2.0500001));+#13731 = PCURVE('',#13316,#13732);+#13732 = DEFINITIONAL_REPRESENTATION('',(#13733),#13737);+#13733 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13734,#13735,#13736),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13734 = CARTESIAN_POINT('',(0.150841801736,0.198174094515));+#13735 = CARTESIAN_POINT('',(0.120004095834,0.198174094515));+#13736 = CARTESIAN_POINT('',(0.102314249038,0.175942260028));+#13737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13738 = PCURVE('',#13739,#13746);+#13739 = SURFACE_OF_LINEAR_EXTRUSION('',#13740,#13744);+#13740 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13741,#13742,#13743),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13741 = CARTESIAN_POINT('',(-0.291284842179,2.868623804797E-02,+ 2.1500001));+#13742 = CARTESIAN_POINT('',(-0.32212254808,2.868623804797E-02,2.1500001+ ));+#13743 = CARTESIAN_POINT('',(-0.339812394877,6.454403560792E-03,+ 2.1500001));+#13744 = VECTOR('',#13745,1.);+#13745 = DIRECTION('',(0.,0.,1.));+#13746 = DEFINITIONAL_REPRESENTATION('',(#13747),#13751);+#13747 = LINE('',#13748,#13749);+#13748 = CARTESIAN_POINT('',(0.,-0.1));+#13749 = VECTOR('',#13750,1.);+#13750 = DIRECTION('',(1.,0.));+#13751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13752 = ORIENTED_EDGE('',*,*,#13753,.T.);+#13753 = EDGE_CURVE('',#13724,#13754,#13756,.T.);+#13754 = VERTEX_POINT('',#13755);+#13755 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,+ 2.0500001));+#13756 = SURFACE_CURVE('',#13757,(#13761,#13768),.PCURVE_S1.);+#13757 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13758,#13759,#13760),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13758 = CARTESIAN_POINT('',(-0.339812394877,6.454403560792E-03,+ 2.0500001));+#13759 = CARTESIAN_POINT('',(-0.357502241673,-1.577743092638E-02,+ 2.0500001));+#13760 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,+ 2.0500001));+#13761 = PCURVE('',#13316,#13762);+#13762 = DEFINITIONAL_REPRESENTATION('',(#13763),#13767);+#13763 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13764,#13765,#13766),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13764 = CARTESIAN_POINT('',(0.102314249038,0.175942260028));+#13765 = CARTESIAN_POINT('',(8.46244022415E-02,0.15371042554));+#13766 = CARTESIAN_POINT('',(8.46244022415E-02,0.114505900208));+#13767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13768 = PCURVE('',#13769,#13776);+#13769 = SURFACE_OF_LINEAR_EXTRUSION('',#13770,#13774);+#13770 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13771,#13772,#13773),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13771 = CARTESIAN_POINT('',(-0.339812394877,6.454403560792E-03,+ 2.1500001));+#13772 = CARTESIAN_POINT('',(-0.357502241673,-1.577743092638E-02,+ 2.1500001));+#13773 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,+ 2.1500001));+#13774 = VECTOR('',#13775,1.);+#13775 = DIRECTION('',(0.,0.,1.));+#13776 = DEFINITIONAL_REPRESENTATION('',(#13777),#13781);+#13777 = LINE('',#13778,#13779);+#13778 = CARTESIAN_POINT('',(0.,-0.1));+#13779 = VECTOR('',#13780,1.);+#13780 = DIRECTION('',(1.,0.));+#13781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13782 = ORIENTED_EDGE('',*,*,#13783,.T.);+#13783 = EDGE_CURVE('',#13754,#13784,#13786,.T.);+#13784 = VERTEX_POINT('',#13785);+#13785 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.0500001)+ );+#13786 = SURFACE_CURVE('',#13787,(#13791,#13798),.PCURVE_S1.);+#13787 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13788,#13789,#13790),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13788 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,+ 2.0500001));+#13789 = CARTESIAN_POINT('',(-0.357502241673,-9.418648159082E-02,+ 2.0500001));+#13790 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.0500001)+ );+#13791 = PCURVE('',#13316,#13792);+#13792 = DEFINITIONAL_REPRESENTATION('',(#13793),#13797);+#13793 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13794,#13795,#13796),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13794 = CARTESIAN_POINT('',(8.46244022415E-02,0.114505900208));+#13795 = CARTESIAN_POINT('',(8.46244022415E-02,7.530137487591E-02));+#13796 = CARTESIAN_POINT('',(0.102314249038,5.306954038874E-02));+#13797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13798 = PCURVE('',#13799,#13806);+#13799 = SURFACE_OF_LINEAR_EXTRUSION('',#13800,#13804);+#13800 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13801,#13802,#13803),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13801 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,+ 2.1500001));+#13802 = CARTESIAN_POINT('',(-0.357502241673,-9.418648159082E-02,+ 2.1500001));+#13803 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.1500001)+ );+#13804 = VECTOR('',#13805,1.);+#13805 = DIRECTION('',(0.,0.,1.));+#13806 = DEFINITIONAL_REPRESENTATION('',(#13807),#13811);+#13807 = LINE('',#13808,#13809);+#13808 = CARTESIAN_POINT('',(0.,-0.1));+#13809 = VECTOR('',#13810,1.);+#13810 = DIRECTION('',(1.,0.));+#13811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13812 = ORIENTED_EDGE('',*,*,#13813,.T.);+#13813 = EDGE_CURVE('',#13784,#13814,#13816,.T.);+#13814 = VERTEX_POINT('',#13815);+#13815 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.0500001)+ );+#13816 = SURFACE_CURVE('',#13817,(#13821,#13828),.PCURVE_S1.);+#13817 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13818,#13819,#13820),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13818 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.0500001)+ );+#13819 = CARTESIAN_POINT('',(-0.32212254808,-0.138650150565,2.0500001));+#13820 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.0500001)+ );+#13821 = PCURVE('',#13316,#13822);+#13822 = DEFINITIONAL_REPRESENTATION('',(#13823),#13827);+#13823 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13824,#13825,#13826),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13824 = CARTESIAN_POINT('',(0.102314249038,5.306954038874E-02));+#13825 = CARTESIAN_POINT('',(0.120004095834,3.083770590156E-02));+#13826 = CARTESIAN_POINT('',(0.150841801736,3.083770590156E-02));+#13827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13828 = PCURVE('',#13829,#13836);+#13829 = SURFACE_OF_LINEAR_EXTRUSION('',#13830,#13834);+#13830 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13831,#13832,#13833),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13831 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.1500001)+ );+#13832 = CARTESIAN_POINT('',(-0.32212254808,-0.138650150565,2.1500001));+#13833 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.1500001)+ );+#13834 = VECTOR('',#13835,1.);+#13835 = DIRECTION('',(0.,0.,1.));+#13836 = DEFINITIONAL_REPRESENTATION('',(#13837),#13841);+#13837 = LINE('',#13838,#13839);+#13838 = CARTESIAN_POINT('',(0.,-0.1));+#13839 = VECTOR('',#13840,1.);+#13840 = DIRECTION('',(1.,0.));+#13841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13842 = ORIENTED_EDGE('',*,*,#13843,.T.);+#13843 = EDGE_CURVE('',#13814,#13844,#13846,.T.);+#13844 = VERTEX_POINT('',#13845);+#13845 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.0500001)+ );+#13846 = SURFACE_CURVE('',#13847,(#13851,#13858),.PCURVE_S1.);+#13847 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13848,#13849,#13850),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13848 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.0500001)+ );+#13849 = CARTESIAN_POINT('',(-0.259251876358,-0.138650150565,2.0500001)+ );+#13850 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.0500001)+ );+#13851 = PCURVE('',#13316,#13852);+#13852 = DEFINITIONAL_REPRESENTATION('',(#13853),#13857);+#13853 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13854,#13855,#13856),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13854 = CARTESIAN_POINT('',(0.150841801736,3.083770590156E-02));+#13855 = CARTESIAN_POINT('',(0.182874767556,3.083770590156E-02));+#13856 = CARTESIAN_POINT('',(0.19913030245,5.199380646194E-02));+#13857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13858 = PCURVE('',#13859,#13866);+#13859 = SURFACE_OF_LINEAR_EXTRUSION('',#13860,#13864);+#13860 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13861,#13862,#13863),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13861 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.1500001)+ );+#13862 = CARTESIAN_POINT('',(-0.259251876358,-0.138650150565,2.1500001)+ );+#13863 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.1500001)+ );+#13864 = VECTOR('',#13865,1.);+#13865 = DIRECTION('',(0.,0.,1.));+#13866 = DEFINITIONAL_REPRESENTATION('',(#13867),#13871);+#13867 = LINE('',#13868,#13869);+#13868 = CARTESIAN_POINT('',(0.,-0.1));+#13869 = VECTOR('',#13870,1.);+#13870 = DIRECTION('',(1.,0.));+#13871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13872 = ORIENTED_EDGE('',*,*,#13873,.T.);+#13873 = EDGE_CURVE('',#13844,#13874,#13876,.T.);+#13874 = VERTEX_POINT('',#13875);+#13875 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,+ 2.0500001));+#13876 = SURFACE_CURVE('',#13877,(#13881,#13888),.PCURVE_S1.);+#13877 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13878,#13879,#13880),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13878 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.0500001)+ );+#13879 = CARTESIAN_POINT('',(-0.226740806571,-9.633794944442E-02,+ 2.0500001));+#13880 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,+ 2.0500001));+#13881 = PCURVE('',#13316,#13882);+#13882 = DEFINITIONAL_REPRESENTATION('',(#13883),#13887);+#13883 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13884,#13885,#13886),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13884 = CARTESIAN_POINT('',(0.19913030245,5.199380646194E-02));+#13885 = CARTESIAN_POINT('',(0.215385837343,7.314990702231E-02));+#13886 = CARTESIAN_POINT('',(0.215385837343,0.114505900208));+#13887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13888 = PCURVE('',#13889,#13896);+#13889 = SURFACE_OF_LINEAR_EXTRUSION('',#13890,#13894);+#13890 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13891,#13892,#13893),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13891 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.1500001)+ );+#13892 = CARTESIAN_POINT('',(-0.226740806571,-9.633794944442E-02,+ 2.1500001));+#13893 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,+ 2.1500001));+#13894 = VECTOR('',#13895,1.);+#13895 = DIRECTION('',(0.,0.,1.));+#13896 = DEFINITIONAL_REPRESENTATION('',(#13897),#13901);+#13897 = LINE('',#13898,#13899);+#13898 = CARTESIAN_POINT('',(0.,-0.1));+#13899 = VECTOR('',#13900,1.);+#13900 = DIRECTION('',(1.,0.));+#13901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13902 = ORIENTED_EDGE('',*,*,#13903,.T.);+#13903 = EDGE_CURVE('',#13874,#13904,#13906,.T.);+#13904 = VERTEX_POINT('',#13905);+#13905 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,+ 2.0500001));+#13906 = SURFACE_CURVE('',#13907,(#13911,#13918),.PCURVE_S1.);+#13907 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13908,#13909,#13910),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13908 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,+ 2.0500001));+#13909 = CARTESIAN_POINT('',(-0.226740806571,-1.338691108905E-02,+ 2.0500001));+#13910 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,+ 2.0500001));+#13911 = PCURVE('',#13316,#13912);+#13912 = DEFINITIONAL_REPRESENTATION('',(#13913),#13917);+#13913 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13914,#13915,#13916),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13914 = CARTESIAN_POINT('',(0.215385837343,0.114505900208));+#13915 = CARTESIAN_POINT('',(0.215385837343,0.156100945378));+#13916 = CARTESIAN_POINT('',(0.19913030245,0.177137519946));+#13917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13918 = PCURVE('',#13919,#13926);+#13919 = SURFACE_OF_LINEAR_EXTRUSION('',#13920,#13924);+#13920 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13921,#13922,#13923),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13921 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,+ 2.1500001));+#13922 = CARTESIAN_POINT('',(-0.226740806571,-1.338691108905E-02,+ 2.1500001));+#13923 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,+ 2.1500001));+#13924 = VECTOR('',#13925,1.);+#13925 = DIRECTION('',(0.,0.,1.));+#13926 = DEFINITIONAL_REPRESENTATION('',(#13927),#13931);+#13927 = LINE('',#13928,#13929);+#13928 = CARTESIAN_POINT('',(0.,-0.1));+#13929 = VECTOR('',#13930,1.);+#13930 = DIRECTION('',(1.,0.));+#13931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13932 = ORIENTED_EDGE('',*,*,#13933,.T.);+#13933 = EDGE_CURVE('',#13904,#13722,#13934,.T.);+#13934 = SURFACE_CURVE('',#13935,(#13939,#13946),.PCURVE_S1.);+#13935 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13936,#13937,#13938),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13936 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,+ 2.0500001));+#13937 = CARTESIAN_POINT('',(-0.259251876358,2.868623804797E-02,+ 2.0500001));+#13938 = CARTESIAN_POINT('',(-0.291284842179,2.868623804797E-02,+ 2.0500001));+#13939 = PCURVE('',#13316,#13940);+#13940 = DEFINITIONAL_REPRESENTATION('',(#13941),#13945);+#13941 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13942,#13943,#13944),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13942 = CARTESIAN_POINT('',(0.19913030245,0.177137519946));+#13943 = CARTESIAN_POINT('',(0.182874767556,0.198174094515));+#13944 = CARTESIAN_POINT('',(0.150841801736,0.198174094515));+#13945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13946 = PCURVE('',#13947,#13954);+#13947 = SURFACE_OF_LINEAR_EXTRUSION('',#13948,#13952);+#13948 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13949,#13950,#13951),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13949 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,+ 2.1500001));+#13950 = CARTESIAN_POINT('',(-0.259251876358,2.868623804797E-02,+ 2.1500001));+#13951 = CARTESIAN_POINT('',(-0.291284842179,2.868623804797E-02,+ 2.1500001));+#13952 = VECTOR('',#13953,1.);+#13953 = DIRECTION('',(0.,0.,1.));+#13954 = DEFINITIONAL_REPRESENTATION('',(#13955),#13959);+#13955 = LINE('',#13956,#13957);+#13956 = CARTESIAN_POINT('',(0.,-0.1));+#13957 = VECTOR('',#13958,1.);+#13958 = DIRECTION('',(1.,0.));+#13959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13960 = ADVANCED_FACE('',(#13961),#13947,.T.);+#13961 = FACE_BOUND('',#13962,.T.);+#13962 = EDGE_LOOP('',(#13963,#14008,#14029,#14030));+#13963 = ORIENTED_EDGE('',*,*,#13964,.T.);+#13964 = EDGE_CURVE('',#13965,#13967,#13969,.T.);+#13965 = VERTEX_POINT('',#13966);+#13966 = CARTESIAN_POINT('',(-0.291284842179,2.868623804797E-02,2.1));+#13967 = VERTEX_POINT('',#13968);+#13968 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,2.1));+#13969 = SURFACE_CURVE('',#13970,(#13979,#13991),.PCURVE_S1.);+#13970 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13971,#13972,#13973,#13974,+ #13975,#13976,#13977,#13978),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.730041910495,1.),.UNSPECIFIED.);+#13971 = CARTESIAN_POINT('',(-0.291284842179,2.868623804796E-02,2.1));+#13972 = CARTESIAN_POINT('',(-0.279598543169,2.868623804797E-02,2.1));+#13973 = CARTESIAN_POINT('',(-0.269306444197,2.681967290395E-02,2.1));+#13974 = CARTESIAN_POINT('',(-0.260414482057,2.30824208082E-02,2.1));+#13975 = CARTESIAN_POINT('',(-0.250154828567,1.540262425516E-02,2.1));+#13976 = CARTESIAN_POINT('',(-0.247576859989,1.307378923317E-02,2.1));+#13977 = CARTESIAN_POINT('',(-0.245190692334,1.04894116637E-02,2.1));+#13978 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,2.1));+#13979 = PCURVE('',#13947,#13980);+#13980 = DEFINITIONAL_REPRESENTATION('',(#13981),#13990);+#13981 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13982,#13983,#13984,#13985,+ #13986,#13987,#13988,#13989),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.730041910495,1.),.UNSPECIFIED.);+#13982 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13983 = CARTESIAN_POINT('',(0.817589493973,-5.00001E-02));+#13984 = CARTESIAN_POINT('',(0.635089645287,-5.00001E-02));+#13985 = CARTESIAN_POINT('',(0.45254486817,-5.00001E-02));+#13986 = CARTESIAN_POINT('',(0.202497760537,-5.00001E-02));+#13987 = CARTESIAN_POINT('',(0.13499550569,-5.00001E-02));+#13988 = CARTESIAN_POINT('',(6.749549873237E-02,-5.00001E-02));+#13989 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13991 = PCURVE('',#13992,#13997);+#13992 = PLANE('',#13993);+#13993 = AXIS2_PLACEMENT_3D('',#13994,#13995,#13996);+#13994 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#13995 = DIRECTION('',(0.,0.,1.));+#13996 = DIRECTION('',(0.51688870171,-0.856052609391,0.));+#13997 = DEFINITIONAL_REPRESENTATION('',(#13998),#14007);+#13998 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13999,#14000,#14001,#14002,+ #14003,#14004,#14005,#14006),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.730041910495,1.),.UNSPECIFIED.);+#13999 = CARTESIAN_POINT('',(4.326222778121,-0.23452755688));+#14000 = CARTESIAN_POINT('',(4.332263294044,-0.224523470119));+#14001 = CARTESIAN_POINT('',(4.339181041682,-0.216677698371));+#14002 = CARTESIAN_POINT('',(4.346976480856,-0.210997454362));+#14003 = CARTESIAN_POINT('',(4.358853889708,-0.206184251291));+#14004 = CARTESIAN_POINT('',(4.362180017836,-0.205181123073));+#14005 = CARTESIAN_POINT('',(4.365625764099,-0.204474273593));+#14006 = CARTESIAN_POINT('',(4.369190973115,-0.204063627557));+#14007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14008 = ORIENTED_EDGE('',*,*,#14009,.T.);+#14009 = EDGE_CURVE('',#13967,#13904,#14010,.T.);+#14010 = SURFACE_CURVE('',#14011,(#14015,#14022),.PCURVE_S1.);+#14011 = LINE('',#14012,#14013);+#14012 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,+ 2.1500001));+#14013 = VECTOR('',#14014,1.);+#14014 = DIRECTION('',(-0.,-0.,-1.));+#14015 = PCURVE('',#13947,#14016);+#14016 = DEFINITIONAL_REPRESENTATION('',(#14017),#14021);+#14017 = LINE('',#14018,#14019);+#14018 = CARTESIAN_POINT('',(0.,0.));+#14019 = VECTOR('',#14020,1.);+#14020 = DIRECTION('',(0.,-1.));+#14021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14022 = PCURVE('',#13919,#14023);+#14023 = DEFINITIONAL_REPRESENTATION('',(#14024),#14028);+#14024 = LINE('',#14025,#14026);+#14025 = CARTESIAN_POINT('',(1.,0.));+#14026 = VECTOR('',#14027,1.);+#14027 = DIRECTION('',(0.,-1.));+#14028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14029 = ORIENTED_EDGE('',*,*,#13933,.T.);+#14030 = ORIENTED_EDGE('',*,*,#14031,.F.);+#14031 = EDGE_CURVE('',#13965,#13722,#14032,.T.);+#14032 = SURFACE_CURVE('',#14033,(#14037,#14044),.PCURVE_S1.);+#14033 = LINE('',#14034,#14035);+#14034 = CARTESIAN_POINT('',(-0.291284842179,2.868623804797E-02,+ 2.1500001));+#14035 = VECTOR('',#14036,1.);+#14036 = DIRECTION('',(-0.,-0.,-1.));+#14037 = PCURVE('',#13947,#14038);+#14038 = DEFINITIONAL_REPRESENTATION('',(#14039),#14043);+#14039 = LINE('',#14040,#14041);+#14040 = CARTESIAN_POINT('',(1.,0.));+#14041 = VECTOR('',#14042,1.);+#14042 = DIRECTION('',(0.,-1.));+#14043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14044 = PCURVE('',#13739,#14045);+#14045 = DEFINITIONAL_REPRESENTATION('',(#14046),#14050);+#14046 = LINE('',#14047,#14048);+#14047 = CARTESIAN_POINT('',(0.,0.));+#14048 = VECTOR('',#14049,1.);+#14049 = DIRECTION('',(0.,-1.));+#14050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14051 = ADVANCED_FACE('',(#14052),#13992,.T.);+#14052 = FACE_BOUND('',#14053,.T.);+#14053 = EDGE_LOOP('',(#14054,#14092,#14121,#14150,#14188,#14226,#14255,+ #14282));+#14054 = ORIENTED_EDGE('',*,*,#14055,.F.);+#14055 = EDGE_CURVE('',#14056,#13965,#14058,.T.);+#14056 = VERTEX_POINT('',#14057);+#14057 = CARTESIAN_POINT('',(-0.339812394877,6.454403560792E-03,2.1));+#14058 = SURFACE_CURVE('',#14059,(#14068,#14080),.PCURVE_S1.);+#14059 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14060,#14061,#14062,#14063,+ #14064,#14065,#14066,#14067),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.389977506284,1.),.UNSPECIFIED.);+#14060 = CARTESIAN_POINT('',(-0.339812394877,6.454403560791E-03,2.1));+#14061 = CARTESIAN_POINT('',(-0.336363343992,1.078902156463E-02,2.1));+#14062 = CARTESIAN_POINT('',(-0.332580617803,1.45608037778E-02,2.1));+#14063 = CARTESIAN_POINT('',(-0.3284642451,1.776911427986E-02,2.1));+#14064 = CARTESIAN_POINT('',(-0.3170540483,2.455068017229E-02,2.1));+#14065 = CARTESIAN_POINT('',(-0.309277910045,2.730839846896E-02,2.1));+#14066 = CARTESIAN_POINT('',(-0.300687257631,2.868623804797E-02,2.1));+#14067 = CARTESIAN_POINT('',(-0.291284842179,2.868623804796E-02,2.1));+#14068 = PCURVE('',#13992,#14069);+#14069 = DEFINITIONAL_REPRESENTATION('',(#14070),#14079);+#14070 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14071,#14072,#14073,#14074,+ #14075,#14076,#14077,#14078),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.389977506284,1.),.UNSPECIFIED.);+#14071 = CARTESIAN_POINT('',(4.320171054334,-0.287561079059));+#14072 = CARTESIAN_POINT('',(4.318243168715,-0.282367994977));+#14073 = CARTESIAN_POINT('',(4.316969573138,-0.277180190741));+#14074 = CARTESIAN_POINT('',(4.316350797104,-0.271998019697));+#14075 = CARTESIAN_POINT('',(4.316443221735,-0.258724976163));+#14076 = CARTESIAN_POINT('',(4.318101867798,-0.250642759289));+#14077 = CARTESIAN_POINT('',(4.321362775805,-0.242576519163));+#14078 = CARTESIAN_POINT('',(4.326222778121,-0.23452755688));+#14079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14080 = PCURVE('',#13739,#14081);+#14081 = DEFINITIONAL_REPRESENTATION('',(#14082),#14091);+#14082 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14083,#14084,#14085,#14086,+ #14087,#14088,#14089,#14090),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.389977506284,1.),.UNSPECIFIED.);+#14083 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#14084 = CARTESIAN_POINT('',(0.902513262989,-5.00001E-02));+#14085 = CARTESIAN_POINT('',(0.805013304695,-5.00001E-02));+#14086 = CARTESIAN_POINT('',(0.707506689683,-5.00001E-02));+#14087 = CARTESIAN_POINT('',(0.45747511578,-5.00001E-02));+#14088 = CARTESIAN_POINT('',(0.304950038934,-5.00001E-02));+#14089 = CARTESIAN_POINT('',(0.152449982542,-5.00001E-02));+#14090 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#14091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14092 = ORIENTED_EDGE('',*,*,#14093,.F.);+#14093 = EDGE_CURVE('',#14094,#14056,#14096,.T.);+#14094 = VERTEX_POINT('',#14095);+#14095 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,2.1));+#14096 = SURFACE_CURVE('',#14097,(#14103,#14112),.PCURVE_S1.);+#14097 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14098,#14099,#14100,#14101,+ #14102),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14098 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,2.1));+#14099 = CARTESIAN_POINT('',(-0.357502241673,-3.539782632855E-02,2.1));+#14100 = CARTESIAN_POINT('',(-0.354559392394,-1.861998177978E-02,2.1));+#14101 = CARTESIAN_POINT('',(-0.348661983884,-4.667377219141E-03,2.1));+#14102 = CARTESIAN_POINT('',(-0.339812394877,6.454403560791E-03,2.1));+#14103 = PCURVE('',#13992,#14104);+#14104 = DEFINITIONAL_REPRESENTATION('',(#14105),#14111);+#14105 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14106,#14107,#14108,#14109,+ #14110),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14106 = CARTESIAN_POINT('',(4.363620128525,-0.334460278834));+#14107 = CARTESIAN_POINT('',(4.346855082996,-0.32433746334));+#14108 = CARTESIAN_POINT('',(4.334013490933,-0.313145951249));+#14109 = CARTESIAN_POINT('',(4.325117631219,-0.300885515649));+#14110 = CARTESIAN_POINT('',(4.320171054334,-0.287561079059));+#14111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14112 = PCURVE('',#13769,#14113);+#14113 = DEFINITIONAL_REPRESENTATION('',(#14114),#14120);+#14114 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14115,#14116,#14117,#14118,+ #14119),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14115 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#14116 = CARTESIAN_POINT('',(0.750231258202,-5.00001E-02));+#14117 = CARTESIAN_POINT('',(0.50024239899,-5.00001E-02));+#14118 = CARTESIAN_POINT('',(0.250131872526,-5.00001E-02));+#14119 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#14120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14121 = ORIENTED_EDGE('',*,*,#14122,.F.);+#14122 = EDGE_CURVE('',#14123,#14094,#14125,.T.);+#14123 = VERTEX_POINT('',#14124);+#14124 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.1));+#14125 = SURFACE_CURVE('',#14126,(#14132,#14141),.PCURVE_S1.);+#14126 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14127,#14128,#14129,#14130,+ #14131),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14127 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.1));+#14128 = CARTESIAN_POINT('',(-0.348661983886,-0.105296535296,2.1));+#14129 = CARTESIAN_POINT('',(-0.354559392394,-9.134393074276E-02,2.1));+#14130 = CARTESIAN_POINT('',(-0.357502241673,-7.456608618371E-02,2.1));+#14131 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,2.1));+#14132 = PCURVE('',#13992,#14133);+#14133 = DEFINITIONAL_REPRESENTATION('',(#14134),#14140);+#14134 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14135,#14136,#14137,#14138,+ #14139),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14135 = CARTESIAN_POINT('',(4.425356566604,-0.351072599589));+#14136 = CARTESIAN_POINT('',(4.411261484571,-0.352899590523));+#14137 = CARTESIAN_POINT('',(4.396269017208,-0.350736138813));+#14138 = CARTESIAN_POINT('',(4.38038517405,-0.344583094325));+#14139 = CARTESIAN_POINT('',(4.363620128525,-0.334460278834));+#14140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14141 = PCURVE('',#13799,#14142);+#14142 = DEFINITIONAL_REPRESENTATION('',(#14143),#14149);+#14143 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14144,#14145,#14146,#14147,+ #14148),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14144 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#14145 = CARTESIAN_POINT('',(0.749868127431,-5.00001E-02));+#14146 = CARTESIAN_POINT('',(0.499757601067,-5.00001E-02));+#14147 = CARTESIAN_POINT('',(0.249768741735,-5.00001E-02));+#14148 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#14149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14150 = ORIENTED_EDGE('',*,*,#14151,.F.);+#14151 = EDGE_CURVE('',#14152,#14123,#14154,.T.);+#14152 = VERTEX_POINT('',#14153);+#14153 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.1));+#14154 = SURFACE_CURVE('',#14155,(#14164,#14176),.PCURVE_S1.);+#14155 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14156,#14157,#14158,#14159,+ #14160,#14161,#14162,#14163),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.608022746301,1.),.UNSPECIFIED.);+#14156 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.1));+#14157 = CARTESIAN_POINT('',(-0.300656435072,-0.138650150565,2.1));+#14158 = CARTESIAN_POINT('',(-0.309221578363,-0.137281329716,2.1));+#14159 = CARTESIAN_POINT('',(-0.31697754792,-0.134541668879,2.1));+#14160 = CARTESIAN_POINT('',(-0.328400894315,-0.127782337583,2.1));+#14161 = CARTESIAN_POINT('',(-0.332541814499,-0.124563383788,2.1));+#14162 = CARTESIAN_POINT('',(-0.336345657766,-0.120775161366,2.1));+#14163 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.1));+#14164 = PCURVE('',#13992,#14165);+#14165 = DEFINITIONAL_REPRESENTATION('',(#14166),#14175);+#14166 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14167,#14168,#14169,#14170,+ #14171,#14172,#14173,#14174),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.608022746301,1.),.UNSPECIFIED.);+#14167 = CARTESIAN_POINT('',(4.469471530239,-0.321021845539));+#14168 = CARTESIAN_POINT('',(4.464627459755,-0.32904442209));+#14169 = CARTESIAN_POINT('',(4.4590284513,-0.335669107322));+#14170 = CARTESIAN_POINT('',(4.452674184457,-0.340892525566));+#14171 = CARTESIAN_POINT('',(4.440983242577,-0.347177689078));+#14172 = CARTESIAN_POINT('',(4.436087253923,-0.349058693758));+#14173 = CARTESIAN_POINT('',(4.430878172626,-0.350356894343));+#14174 = CARTESIAN_POINT('',(4.425356566604,-0.351072599589));+#14175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14176 = PCURVE('',#13829,#14177);+#14177 = DEFINITIONAL_REPRESENTATION('',(#14178),#14187);+#14178 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14179,#14180,#14181,#14182,+ #14183,#14184,#14185,#14186),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.608022746301,1.),.UNSPECIFIED.);+#14179 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#14180 = CARTESIAN_POINT('',(0.848049771867,-5.00001E-02));+#14181 = CARTESIAN_POINT('',(0.696049797763,-5.00001E-02));+#14182 = CARTESIAN_POINT('',(0.54402488524,-5.00001E-02));+#14183 = CARTESIAN_POINT('',(0.29399330967,-5.00001E-02));+#14184 = CARTESIAN_POINT('',(0.195986626628,-5.00001E-02));+#14185 = CARTESIAN_POINT('',(9.798663467211E-02,-5.00001E-02));+#14186 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#14187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14188 = ORIENTED_EDGE('',*,*,#14189,.F.);+#14189 = EDGE_CURVE('',#14190,#14152,#14192,.T.);+#14190 = VERTEX_POINT('',#14191);+#14191 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.1));+#14192 = SURFACE_CURVE('',#14193,(#14202,#14214),.PCURVE_S1.);+#14193 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14194,#14195,#14196,#14197,+ #14198,#14199,#14200,#14201),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.275958114248,1.),.UNSPECIFIED.);+#14194 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.1));+#14195 = CARTESIAN_POINT('',(-0.245239448419,-0.120413387732,2.1));+#14196 = CARTESIAN_POINT('',(-0.247682994921,-0.123064369894,2.1));+#14197 = CARTESIAN_POINT('',(-0.250326965129,-0.125446808823,2.1));+#14198 = CARTESIAN_POINT('',(-0.260633939371,-0.133106745117,2.1));+#14199 = CARTESIAN_POINT('',(-0.269475646056,-0.136803696689,2.1));+#14200 = CARTESIAN_POINT('',(-0.279694550964,-0.138650150565,2.1));+#14201 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.1));+#14202 = PCURVE('',#13992,#14203);+#14203 = DEFINITIONAL_REPRESENTATION('',(#14204),#14213);+#14204 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14205,#14206,#14207,#14208,+ #14209,#14210,#14211,#14212),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.275958114248,1.),.UNSPECIFIED.);+#14205 = CARTESIAN_POINT('',(4.476320575592,-0.268748999147));+#14206 = CARTESIAN_POINT('',(4.477660245629,-0.272178189396));+#14207 = CARTESIAN_POINT('',(4.478666584248,-0.275640256484));+#14208 = CARTESIAN_POINT('',(4.479339438981,-0.279135089844));+#14209 = CARTESIAN_POINT('',(4.480569188899,-0.291917736565));+#14210 = CARTESIAN_POINT('',(4.47916379565,-0.301397615143));+#14211 = CARTESIAN_POINT('',(4.475462420818,-0.311099946501));+#14212 = CARTESIAN_POINT('',(4.469471530239,-0.321021845539));+#14213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14214 = PCURVE('',#13859,#14215);+#14215 = DEFINITIONAL_REPRESENTATION('',(#14216),#14225);+#14216 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14217,#14218,#14219,#14220,+ #14221,#14222,#14223,#14224),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.275958114248,1.),.UNSPECIFIED.);+#14217 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#14218 = CARTESIAN_POINT('',(0.931004824861,-5.00001E-02));+#14219 = CARTESIAN_POINT('',(0.862004811343,-5.00001E-02));+#14220 = CARTESIAN_POINT('',(0.793002391327,-5.00001E-02));+#14221 = CARTESIAN_POINT('',(0.542955780033,-5.00001E-02));+#14222 = CARTESIAN_POINT('',(0.361911736534,-5.00001E-02));+#14223 = CARTESIAN_POINT('',(0.180911928046,-5.00001E-02));+#14224 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#14225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14226 = ORIENTED_EDGE('',*,*,#14227,.F.);+#14227 = EDGE_CURVE('',#14228,#14190,#14230,.T.);+#14228 = VERTEX_POINT('',#14229);+#14229 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,2.1));+#14230 = SURFACE_CURVE('',#14231,(#14237,#14246),.PCURVE_S1.);+#14231 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14232,#14233,#14234,#14235,+ #14236),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14232 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,2.1));+#14233 = CARTESIAN_POINT('',(-0.226740806571,-7.563482380991E-02,2.1));+#14234 = CARTESIAN_POINT('',(-0.229443472444,-9.295205982269E-02,2.1));+#14235 = CARTESIAN_POINT('',(-0.23486230202,-0.106907836904,2.1));+#14236 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.1));+#14237 = PCURVE('',#13992,#14238);+#14238 = DEFINITIONAL_REPRESENTATION('',(#14239),#14245);+#14239 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14240,#14241,#14242,#14243,+ #14244),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14240 = CARTESIAN_POINT('',(4.431209236949,-0.222521611107));+#14241 = CARTESIAN_POINT('',(4.448889178107,-0.233196845002));+#14242 = CARTESIAN_POINT('',(4.462316665729,-0.244461552815));+#14243 = CARTESIAN_POINT('',(4.471462613331,-0.25631393951));+#14244 = CARTESIAN_POINT('',(4.476320575592,-0.268748999147));+#14245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14246 = PCURVE('',#13889,#14247);+#14247 = DEFINITIONAL_REPRESENTATION('',(#14248),#14254);+#14248 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14249,#14250,#14251,#14252,+ #14253),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14249 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#14250 = CARTESIAN_POINT('',(0.750303813784,-5.00001E-02));+#14251 = CARTESIAN_POINT('',(0.500331630576,-5.00001E-02));+#14252 = CARTESIAN_POINT('',(0.250192918848,-5.00001E-02));+#14253 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#14254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14255 = ORIENTED_EDGE('',*,*,#14256,.F.);+#14256 = EDGE_CURVE('',#13967,#14228,#14257,.T.);+#14257 = SURFACE_CURVE('',#14258,(#14264,#14273),.PCURVE_S1.);+#14258 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14259,#14260,#14261,#14262,+ #14263),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14259 = CARTESIAN_POINT('',(-0.242996341465,7.649663479457E-03,2.1));+#14260 = CARTESIAN_POINT('',(-0.234862140003,-2.876950176238E-03,2.1));+#14261 = CARTESIAN_POINT('',(-0.229443312406,-1.683306163198E-02,2.1));+#14262 = CARTESIAN_POINT('',(-0.226740806571,-3.421032133869E-02,2.1));+#14263 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,2.1));+#14264 = PCURVE('',#13992,#14265);+#14265 = DEFINITIONAL_REPRESENTATION('',(#14266),#14272);+#14266 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14267,#14268,#14269,#14270,+ #14271),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14267 = CARTESIAN_POINT('',(4.369190973115,-0.204063627557));+#14268 = CARTESIAN_POINT('',(4.382406785035,-0.202541410837));+#14269 = CARTESIAN_POINT('',(4.397154881426,-0.205116365664));+#14270 = CARTESIAN_POINT('',(4.413427624674,-0.211784987701));+#14271 = CARTESIAN_POINT('',(4.431209236949,-0.222521611107));+#14272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14273 = PCURVE('',#13919,#14274);+#14274 = DEFINITIONAL_REPRESENTATION('',(#14275),#14281);+#14275 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#14276,#14277,#14278,#14279,+ #14280),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#14276 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#14277 = CARTESIAN_POINT('',(0.749802097737,-5.00001E-02));+#14278 = CARTESIAN_POINT('',(0.499660109562,-5.00001E-02));+#14279 = CARTESIAN_POINT('',(0.249688813118,-5.00001E-02));+#14280 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#14281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14282 = ORIENTED_EDGE('',*,*,#13964,.F.);+#14283 = ADVANCED_FACE('',(#14284),#13919,.T.);+#14284 = FACE_BOUND('',#14285,.T.);+#14285 = EDGE_LOOP('',(#14286,#14287,#14308,#14309));+#14286 = ORIENTED_EDGE('',*,*,#14256,.T.);+#14287 = ORIENTED_EDGE('',*,*,#14288,.T.);+#14288 = EDGE_CURVE('',#14228,#13874,#14289,.T.);+#14289 = SURFACE_CURVE('',#14290,(#14294,#14301),.PCURVE_S1.);+#14290 = LINE('',#14291,#14292);+#14291 = CARTESIAN_POINT('',(-0.226740806571,-5.49819562586E-02,+ 2.1500001));+#14292 = VECTOR('',#14293,1.);+#14293 = DIRECTION('',(-0.,-0.,-1.));+#14294 = PCURVE('',#13919,#14295);+#14295 = DEFINITIONAL_REPRESENTATION('',(#14296),#14300);+#14296 = LINE('',#14297,#14298);+#14297 = CARTESIAN_POINT('',(0.,0.));+#14298 = VECTOR('',#14299,1.);+#14299 = DIRECTION('',(0.,-1.));+#14300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14301 = PCURVE('',#13889,#14302);+#14302 = DEFINITIONAL_REPRESENTATION('',(#14303),#14307);+#14303 = LINE('',#14304,#14305);+#14304 = CARTESIAN_POINT('',(1.,0.));+#14305 = VECTOR('',#14306,1.);+#14306 = DIRECTION('',(0.,-1.));+#14307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14308 = ORIENTED_EDGE('',*,*,#13903,.T.);+#14309 = ORIENTED_EDGE('',*,*,#14009,.F.);+#14310 = ADVANCED_FACE('',(#14311),#13889,.T.);+#14311 = FACE_BOUND('',#14312,.T.);+#14312 = EDGE_LOOP('',(#14313,#14314,#14335,#14336));+#14313 = ORIENTED_EDGE('',*,*,#14227,.T.);+#14314 = ORIENTED_EDGE('',*,*,#14315,.T.);+#14315 = EDGE_CURVE('',#14190,#13844,#14316,.T.);+#14316 = SURFACE_CURVE('',#14317,(#14321,#14328),.PCURVE_S1.);+#14317 = LINE('',#14318,#14319);+#14318 = CARTESIAN_POINT('',(-0.242996341465,-0.117494050005,2.1500001)+ );+#14319 = VECTOR('',#14320,1.);+#14320 = DIRECTION('',(-0.,-0.,-1.));+#14321 = PCURVE('',#13889,#14322);+#14322 = DEFINITIONAL_REPRESENTATION('',(#14323),#14327);+#14323 = LINE('',#14324,#14325);+#14324 = CARTESIAN_POINT('',(0.,0.));+#14325 = VECTOR('',#14326,1.);+#14326 = DIRECTION('',(0.,-1.));+#14327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14328 = PCURVE('',#13859,#14329);+#14329 = DEFINITIONAL_REPRESENTATION('',(#14330),#14334);+#14330 = LINE('',#14331,#14332);+#14331 = CARTESIAN_POINT('',(1.,0.));+#14332 = VECTOR('',#14333,1.);+#14333 = DIRECTION('',(0.,-1.));+#14334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14335 = ORIENTED_EDGE('',*,*,#13873,.T.);+#14336 = ORIENTED_EDGE('',*,*,#14288,.F.);+#14337 = ADVANCED_FACE('',(#14338),#13859,.T.);+#14338 = FACE_BOUND('',#14339,.T.);+#14339 = EDGE_LOOP('',(#14340,#14341,#14362,#14363));+#14340 = ORIENTED_EDGE('',*,*,#14189,.T.);+#14341 = ORIENTED_EDGE('',*,*,#14342,.T.);+#14342 = EDGE_CURVE('',#14152,#13814,#14343,.T.);+#14343 = SURFACE_CURVE('',#14344,(#14348,#14355),.PCURVE_S1.);+#14344 = LINE('',#14345,#14346);+#14345 = CARTESIAN_POINT('',(-0.291284842179,-0.138650150565,2.1500001)+ );+#14346 = VECTOR('',#14347,1.);+#14347 = DIRECTION('',(-0.,-0.,-1.));+#14348 = PCURVE('',#13859,#14349);+#14349 = DEFINITIONAL_REPRESENTATION('',(#14350),#14354);+#14350 = LINE('',#14351,#14352);+#14351 = CARTESIAN_POINT('',(0.,0.));+#14352 = VECTOR('',#14353,1.);+#14353 = DIRECTION('',(0.,-1.));+#14354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14355 = PCURVE('',#13829,#14356);+#14356 = DEFINITIONAL_REPRESENTATION('',(#14357),#14361);+#14357 = LINE('',#14358,#14359);+#14358 = CARTESIAN_POINT('',(1.,0.));+#14359 = VECTOR('',#14360,1.);+#14360 = DIRECTION('',(0.,-1.));+#14361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14362 = ORIENTED_EDGE('',*,*,#13843,.T.);+#14363 = ORIENTED_EDGE('',*,*,#14315,.F.);+#14364 = ADVANCED_FACE('',(#14365),#13829,.T.);+#14365 = FACE_BOUND('',#14366,.T.);+#14366 = EDGE_LOOP('',(#14367,#14368,#14389,#14390));+#14367 = ORIENTED_EDGE('',*,*,#14151,.T.);+#14368 = ORIENTED_EDGE('',*,*,#14369,.T.);+#14369 = EDGE_CURVE('',#14123,#13784,#14370,.T.);+#14370 = SURFACE_CURVE('',#14371,(#14375,#14382),.PCURVE_S1.);+#14371 = LINE('',#14372,#14373);+#14372 = CARTESIAN_POINT('',(-0.339812394877,-0.116418316078,2.1500001)+ );+#14373 = VECTOR('',#14374,1.);+#14374 = DIRECTION('',(-0.,-0.,-1.));+#14375 = PCURVE('',#13829,#14376);+#14376 = DEFINITIONAL_REPRESENTATION('',(#14377),#14381);+#14377 = LINE('',#14378,#14379);+#14378 = CARTESIAN_POINT('',(0.,0.));+#14379 = VECTOR('',#14380,1.);+#14380 = DIRECTION('',(0.,-1.));+#14381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14382 = PCURVE('',#13799,#14383);+#14383 = DEFINITIONAL_REPRESENTATION('',(#14384),#14388);+#14384 = LINE('',#14385,#14386);+#14385 = CARTESIAN_POINT('',(1.,0.));+#14386 = VECTOR('',#14387,1.);+#14387 = DIRECTION('',(0.,-1.));+#14388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14389 = ORIENTED_EDGE('',*,*,#13813,.T.);+#14390 = ORIENTED_EDGE('',*,*,#14342,.F.);+#14391 = ADVANCED_FACE('',(#14392),#13799,.T.);+#14392 = FACE_BOUND('',#14393,.T.);+#14393 = EDGE_LOOP('',(#14394,#14395,#14416,#14417));+#14394 = ORIENTED_EDGE('',*,*,#14122,.T.);+#14395 = ORIENTED_EDGE('',*,*,#14396,.T.);+#14396 = EDGE_CURVE('',#14094,#13754,#14397,.T.);+#14397 = SURFACE_CURVE('',#14398,(#14402,#14409),.PCURVE_S1.);+#14398 = LINE('',#14399,#14400);+#14399 = CARTESIAN_POINT('',(-0.357502241673,-5.49819562586E-02,+ 2.1500001));+#14400 = VECTOR('',#14401,1.);+#14401 = DIRECTION('',(-0.,-0.,-1.));+#14402 = PCURVE('',#13799,#14403);+#14403 = DEFINITIONAL_REPRESENTATION('',(#14404),#14408);+#14404 = LINE('',#14405,#14406);+#14405 = CARTESIAN_POINT('',(0.,0.));+#14406 = VECTOR('',#14407,1.);+#14407 = DIRECTION('',(0.,-1.));+#14408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14409 = PCURVE('',#13769,#14410);+#14410 = DEFINITIONAL_REPRESENTATION('',(#14411),#14415);+#14411 = LINE('',#14412,#14413);+#14412 = CARTESIAN_POINT('',(1.,0.));+#14413 = VECTOR('',#14414,1.);+#14414 = DIRECTION('',(0.,-1.));+#14415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14416 = ORIENTED_EDGE('',*,*,#13783,.T.);+#14417 = ORIENTED_EDGE('',*,*,#14369,.F.);+#14418 = ADVANCED_FACE('',(#14419),#13769,.T.);+#14419 = FACE_BOUND('',#14420,.T.);+#14420 = EDGE_LOOP('',(#14421,#14422,#14443,#14444));+#14421 = ORIENTED_EDGE('',*,*,#14093,.T.);+#14422 = ORIENTED_EDGE('',*,*,#14423,.T.);+#14423 = EDGE_CURVE('',#14056,#13724,#14424,.T.);+#14424 = SURFACE_CURVE('',#14425,(#14429,#14436),.PCURVE_S1.);+#14425 = LINE('',#14426,#14427);+#14426 = CARTESIAN_POINT('',(-0.339812394877,6.454403560792E-03,+ 2.1500001));+#14427 = VECTOR('',#14428,1.);+#14428 = DIRECTION('',(-0.,-0.,-1.));+#14429 = PCURVE('',#13769,#14430);+#14430 = DEFINITIONAL_REPRESENTATION('',(#14431),#14435);+#14431 = LINE('',#14432,#14433);+#14432 = CARTESIAN_POINT('',(0.,0.));+#14433 = VECTOR('',#14434,1.);+#14434 = DIRECTION('',(0.,-1.));+#14435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14436 = PCURVE('',#13739,#14437);+#14437 = DEFINITIONAL_REPRESENTATION('',(#14438),#14442);+#14438 = LINE('',#14439,#14440);+#14439 = CARTESIAN_POINT('',(1.,0.));+#14440 = VECTOR('',#14441,1.);+#14441 = DIRECTION('',(0.,-1.));+#14442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14443 = ORIENTED_EDGE('',*,*,#13753,.T.);+#14444 = ORIENTED_EDGE('',*,*,#14396,.F.);+#14445 = ADVANCED_FACE('',(#14446),#13739,.T.);+#14446 = FACE_BOUND('',#14447,.T.);+#14447 = EDGE_LOOP('',(#14448,#14449,#14450,#14451));+#14448 = ORIENTED_EDGE('',*,*,#14055,.T.);+#14449 = ORIENTED_EDGE('',*,*,#14031,.T.);+#14450 = ORIENTED_EDGE('',*,*,#13721,.T.);+#14451 = ORIENTED_EDGE('',*,*,#14423,.F.);+#14452 = ADVANCED_FACE('',(#14453),#7121,.T.);+#14453 = FACE_BOUND('',#14454,.T.);+#14454 = EDGE_LOOP('',(#14455,#14456,#14477,#14478));+#14455 = ORIENTED_EDGE('',*,*,#7095,.T.);+#14456 = ORIENTED_EDGE('',*,*,#14457,.T.);+#14457 = EDGE_CURVE('',#7060,#13654,#14458,.T.);+#14458 = SURFACE_CURVE('',#14459,(#14463,#14470),.PCURVE_S1.);+#14459 = LINE('',#14460,#14461);+#14460 = CARTESIAN_POINT('',(-0.375550666445,0.146419340036,2.1500001));+#14461 = VECTOR('',#14462,1.);+#14462 = DIRECTION('',(-0.,-0.,-1.));+#14463 = PCURVE('',#7121,#14464);+#14464 = DEFINITIONAL_REPRESENTATION('',(#14465),#14469);+#14465 = LINE('',#14466,#14467);+#14466 = CARTESIAN_POINT('',(0.,0.));+#14467 = VECTOR('',#14468,1.);+#14468 = DIRECTION('',(0.,-1.));+#14469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14470 = PCURVE('',#7079,#14471);+#14471 = DEFINITIONAL_REPRESENTATION('',(#14472),#14476);+#14472 = LINE('',#14473,#14474);+#14473 = CARTESIAN_POINT('',(1.,0.));+#14474 = VECTOR('',#14475,1.);+#14475 = DIRECTION('',(0.,-1.));+#14476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14477 = ORIENTED_EDGE('',*,*,#13676,.T.);+#14478 = ORIENTED_EDGE('',*,*,#13277,.F.);+#14479 = ADVANCED_FACE('',(#14480),#7079,.T.);+#14480 = FACE_BOUND('',#14481,.T.);+#14481 = EDGE_LOOP('',(#14482,#14483,#14504,#14505));+#14482 = ORIENTED_EDGE('',*,*,#7059,.T.);+#14483 = ORIENTED_EDGE('',*,*,#14484,.T.);+#14484 = EDGE_CURVE('',#7021,#13631,#14485,.T.);+#14485 = SURFACE_CURVE('',#14486,(#14490,#14497),.PCURVE_S1.);+#14486 = LINE('',#14487,#14488);+#14487 = CARTESIAN_POINT('',(-0.410332730078,8.60587141439E-03,2.1500001+ ));+#14488 = VECTOR('',#14489,1.);+#14489 = DIRECTION('',(-0.,-0.,-1.));+#14490 = PCURVE('',#7079,#14491);+#14491 = DEFINITIONAL_REPRESENTATION('',(#14492),#14496);+#14492 = LINE('',#14493,#14494);+#14493 = CARTESIAN_POINT('',(0.,0.));+#14494 = VECTOR('',#14495,1.);+#14495 = DIRECTION('',(0.,-1.));+#14496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14497 = PCURVE('',#7042,#14498);+#14498 = DEFINITIONAL_REPRESENTATION('',(#14499),#14503);+#14499 = LINE('',#14500,#14501);+#14500 = CARTESIAN_POINT('',(1.,0.));+#14501 = VECTOR('',#14502,1.);+#14502 = DIRECTION('',(0.,-1.));+#14503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14504 = ORIENTED_EDGE('',*,*,#13653,.T.);+#14505 = ORIENTED_EDGE('',*,*,#14457,.F.);+#14506 = ADVANCED_FACE('',(#14507),#7042,.T.);+#14507 = FACE_BOUND('',#14508,.T.);+#14508 = EDGE_LOOP('',(#14509,#14510,#14531,#14532));+#14509 = ORIENTED_EDGE('',*,*,#7020,.T.);+#14510 = ORIENTED_EDGE('',*,*,#14511,.T.);+#14511 = EDGE_CURVE('',#6976,#13608,#14512,.T.);+#14512 = SURFACE_CURVE('',#14513,(#14517,#14524),.PCURVE_S1.);+#14513 = LINE('',#14514,#14515);+#14514 = CARTESIAN_POINT('',(-0.381407440046,-0.131837169029,2.1500001)+ );+#14515 = VECTOR('',#14516,1.);+#14516 = DIRECTION('',(-0.,-0.,-1.));+#14517 = PCURVE('',#7042,#14518);+#14518 = DEFINITIONAL_REPRESENTATION('',(#14519),#14523);+#14519 = LINE('',#14520,#14521);+#14520 = CARTESIAN_POINT('',(0.,0.));+#14521 = VECTOR('',#14522,1.);+#14522 = DIRECTION('',(0.,-1.));+#14523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14524 = PCURVE('',#7001,#14525);+#14525 = DEFINITIONAL_REPRESENTATION('',(#14526),#14530);+#14526 = LINE('',#14527,#14528);+#14527 = CARTESIAN_POINT('',(1.,0.));+#14528 = VECTOR('',#14529,1.);+#14529 = DIRECTION('',(0.,-1.));+#14530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14531 = ORIENTED_EDGE('',*,*,#13630,.T.);+#14532 = ORIENTED_EDGE('',*,*,#14484,.F.);+#14533 = ADVANCED_FACE('',(#14534),#7001,.T.);+#14534 = FACE_BOUND('',#14535,.T.);+#14535 = EDGE_LOOP('',(#14536,#14537,#14558,#14559));+#14536 = ORIENTED_EDGE('',*,*,#6975,.T.);+#14537 = ORIENTED_EDGE('',*,*,#14538,.T.);+#14538 = EDGE_CURVE('',#6931,#13585,#14539,.T.);+#14539 = SURFACE_CURVE('',#14540,(#14544,#14551),.PCURVE_S1.);+#14540 = LINE('',#14541,#14542);+#14541 = CARTESIAN_POINT('',(-0.290328634244,-0.176420363995,2.1500001)+ );+#14542 = VECTOR('',#14543,1.);+#14543 = DIRECTION('',(-0.,-0.,-1.));+#14544 = PCURVE('',#7001,#14545);+#14545 = DEFINITIONAL_REPRESENTATION('',(#14546),#14550);+#14546 = LINE('',#14547,#14548);+#14547 = CARTESIAN_POINT('',(0.,0.));+#14548 = VECTOR('',#14549,1.);+#14549 = DIRECTION('',(0.,-1.));+#14550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14551 = PCURVE('',#6956,#14552);+#14552 = DEFINITIONAL_REPRESENTATION('',(#14553),#14557);+#14553 = LINE('',#14554,#14555);+#14554 = CARTESIAN_POINT('',(1.,0.));+#14555 = VECTOR('',#14556,1.);+#14556 = DIRECTION('',(0.,-1.));+#14557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14558 = ORIENTED_EDGE('',*,*,#13607,.T.);+#14559 = ORIENTED_EDGE('',*,*,#14511,.F.);+#14560 = ADVANCED_FACE('',(#14561),#6956,.T.);+#14561 = FACE_BOUND('',#14562,.T.);+#14562 = EDGE_LOOP('',(#14563,#14564,#14585,#14586));+#14563 = ORIENTED_EDGE('',*,*,#6930,.T.);+#14564 = ORIENTED_EDGE('',*,*,#14565,.T.);+#14565 = EDGE_CURVE('',#6895,#13562,#14566,.T.);+#14566 = SURFACE_CURVE('',#14567,(#14571,#14578),.PCURVE_S1.);+#14567 = LINE('',#14568,#14569);+#14568 = CARTESIAN_POINT('',(-0.208333803823,-0.144626450158,2.1500001)+ );+#14569 = VECTOR('',#14570,1.);+#14570 = DIRECTION('',(-0.,-0.,-1.));+#14571 = PCURVE('',#6956,#14572);+#14572 = DEFINITIONAL_REPRESENTATION('',(#14573),#14577);+#14573 = LINE('',#14574,#14575);+#14574 = CARTESIAN_POINT('',(0.,0.));+#14575 = VECTOR('',#14576,1.);+#14576 = DIRECTION('',(0.,-1.));+#14577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14578 = PCURVE('',#6914,#14579);+#14579 = DEFINITIONAL_REPRESENTATION('',(#14580),#14584);+#14580 = LINE('',#14581,#14582);+#14581 = CARTESIAN_POINT('',(1.,0.));+#14582 = VECTOR('',#14583,1.);+#14583 = DIRECTION('',(0.,-1.));+#14584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14585 = ORIENTED_EDGE('',*,*,#13584,.T.);+#14586 = ORIENTED_EDGE('',*,*,#14538,.F.);+#14587 = ADVANCED_FACE('',(#14588),#6914,.T.);+#14588 = FACE_BOUND('',#14589,.T.);+#14589 = EDGE_LOOP('',(#14590,#14591,#14612,#14613));+#14590 = ORIENTED_EDGE('',*,*,#6894,.T.);+#14591 = ORIENTED_EDGE('',*,*,#14592,.T.);+#14592 = EDGE_CURVE('',#6859,#13539,#14593,.T.);+#14593 = SURFACE_CURVE('',#14594,(#14598,#14605),.PCURVE_S1.);+#14594 = LINE('',#14595,#14596);+#14595 = CARTESIAN_POINT('',(-0.179169461808,-5.49819562586E-02,+ 2.1500001));+#14596 = VECTOR('',#14597,1.);+#14597 = DIRECTION('',(-0.,-0.,-1.));+#14598 = PCURVE('',#6914,#14599);+#14599 = DEFINITIONAL_REPRESENTATION('',(#14600),#14604);+#14600 = LINE('',#14601,#14602);+#14601 = CARTESIAN_POINT('',(0.,0.));+#14602 = VECTOR('',#14603,1.);+#14603 = DIRECTION('',(0.,-1.));+#14604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14605 = PCURVE('',#6878,#14606);+#14606 = DEFINITIONAL_REPRESENTATION('',(#14607),#14611);+#14607 = LINE('',#14608,#14609);+#14608 = CARTESIAN_POINT('',(1.,0.));+#14609 = VECTOR('',#14610,1.);+#14610 = DIRECTION('',(0.,-1.));+#14611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14612 = ORIENTED_EDGE('',*,*,#13561,.T.);+#14613 = ORIENTED_EDGE('',*,*,#14565,.F.);+#14614 = ADVANCED_FACE('',(#14615),#6878,.T.);+#14615 = FACE_BOUND('',#14616,.T.);+#14616 = EDGE_LOOP('',(#14617,#14618,#14639,#14640));+#14617 = ORIENTED_EDGE('',*,*,#6858,.T.);+#14618 = ORIENTED_EDGE('',*,*,#14619,.T.);+#14619 = EDGE_CURVE('',#6814,#13516,#14620,.T.);+#14620 = SURFACE_CURVE('',#14621,(#14625,#14632),.PCURVE_S1.);+#14621 = LINE('',#14622,#14623);+#14622 = CARTESIAN_POINT('',(-0.20749712188,3.478206363316E-02,2.1500001+ ));+#14623 = VECTOR('',#14624,1.);+#14624 = DIRECTION('',(-0.,-0.,-1.));+#14625 = PCURVE('',#6878,#14626);+#14626 = DEFINITIONAL_REPRESENTATION('',(#14627),#14631);+#14627 = LINE('',#14628,#14629);+#14628 = CARTESIAN_POINT('',(0.,0.));+#14629 = VECTOR('',#14630,1.);+#14630 = DIRECTION('',(0.,-1.));+#14631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14632 = PCURVE('',#6839,#14633);+#14633 = DEFINITIONAL_REPRESENTATION('',(#14634),#14638);+#14634 = LINE('',#14635,#14636);+#14635 = CARTESIAN_POINT('',(1.,0.));+#14636 = VECTOR('',#14637,1.);+#14637 = DIRECTION('',(0.,-1.));+#14638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14639 = ORIENTED_EDGE('',*,*,#13538,.T.);+#14640 = ORIENTED_EDGE('',*,*,#14592,.F.);+#14641 = ADVANCED_FACE('',(#14642),#6839,.T.);+#14642 = FACE_BOUND('',#14643,.T.);+#14643 = EDGE_LOOP('',(#14644,#14645,#14666,#14667));+#14644 = ORIENTED_EDGE('',*,*,#6813,.T.);+#14645 = ORIENTED_EDGE('',*,*,#14646,.T.);+#14646 = EDGE_CURVE('',#6778,#13493,#14647,.T.);+#14647 = SURFACE_CURVE('',#14648,(#14652,#14659),.PCURVE_S1.);+#14648 = LINE('',#14649,#14650);+#14649 = CARTESIAN_POINT('',(-0.287460010439,6.645645147779E-02,+ 2.1500001));+#14650 = VECTOR('',#14651,1.);+#14651 = DIRECTION('',(-0.,-0.,-1.));+#14652 = PCURVE('',#6839,#14653);+#14653 = DEFINITIONAL_REPRESENTATION('',(#14654),#14658);+#14654 = LINE('',#14655,#14656);+#14655 = CARTESIAN_POINT('',(0.,0.));+#14656 = VECTOR('',#14657,1.);+#14657 = DIRECTION('',(0.,-1.));+#14658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14659 = PCURVE('',#6797,#14660);+#14660 = DEFINITIONAL_REPRESENTATION('',(#14661),#14665);+#14661 = LINE('',#14662,#14663);+#14662 = CARTESIAN_POINT('',(1.,0.));+#14663 = VECTOR('',#14664,1.);+#14664 = DIRECTION('',(0.,-1.));+#14665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14666 = ORIENTED_EDGE('',*,*,#13515,.T.);+#14667 = ORIENTED_EDGE('',*,*,#14619,.F.);+#14668 = ADVANCED_FACE('',(#14669),#6797,.T.);+#14669 = FACE_BOUND('',#14670,.T.);+#14670 = EDGE_LOOP('',(#14671,#14672,#14693,#14694));+#14671 = ORIENTED_EDGE('',*,*,#6777,.T.);+#14672 = ORIENTED_EDGE('',*,*,#14673,.T.);+#14673 = EDGE_CURVE('',#6733,#13470,#14674,.T.);+#14674 = SURFACE_CURVE('',#14675,(#14679,#14686),.PCURVE_S1.);+#14675 = LINE('',#14676,#14677);+#14676 = CARTESIAN_POINT('',(-0.334075147267,5.366717034807E-02,+ 2.1500001));+#14677 = VECTOR('',#14678,1.);+#14678 = DIRECTION('',(-0.,-0.,-1.));+#14679 = PCURVE('',#6797,#14680);+#14680 = DEFINITIONAL_REPRESENTATION('',(#14681),#14685);+#14681 = LINE('',#14682,#14683);+#14682 = CARTESIAN_POINT('',(0.,0.));+#14683 = VECTOR('',#14684,1.);+#14684 = DIRECTION('',(0.,-1.));+#14685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14686 = PCURVE('',#6758,#14687);+#14687 = DEFINITIONAL_REPRESENTATION('',(#14688),#14692);+#14688 = LINE('',#14689,#14690);+#14689 = CARTESIAN_POINT('',(1.,0.));+#14690 = VECTOR('',#14691,1.);+#14691 = DIRECTION('',(0.,-1.));+#14692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14693 = ORIENTED_EDGE('',*,*,#13492,.T.);+#14694 = ORIENTED_EDGE('',*,*,#14646,.F.);+#14695 = ADVANCED_FACE('',(#14696),#6758,.T.);+#14696 = FACE_BOUND('',#14697,.T.);+#14697 = EDGE_LOOP('',(#14698,#14699,#14720,#14721));+#14698 = ORIENTED_EDGE('',*,*,#6732,.T.);+#14699 = ORIENTED_EDGE('',*,*,#14700,.T.);+#14700 = EDGE_CURVE('',#6697,#13447,#14701,.T.);+#14701 = SURFACE_CURVE('',#14702,(#14706,#14713),.PCURVE_S1.);+#14702 = LINE('',#14703,#14704);+#14703 = CARTESIAN_POINT('',(-0.365869061103,1.697269084505E-02,+ 2.1500001));+#14704 = VECTOR('',#14705,1.);+#14705 = DIRECTION('',(-0.,-0.,-1.));+#14706 = PCURVE('',#6758,#14707);+#14707 = DEFINITIONAL_REPRESENTATION('',(#14708),#14712);+#14708 = LINE('',#14709,#14710);+#14709 = CARTESIAN_POINT('',(0.,0.));+#14710 = VECTOR('',#14711,1.);+#14711 = DIRECTION('',(0.,-1.));+#14712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14713 = PCURVE('',#6716,#14714);+#14714 = DEFINITIONAL_REPRESENTATION('',(#14715),#14719);+#14715 = LINE('',#14716,#14717);+#14716 = CARTESIAN_POINT('',(1.,0.));+#14717 = VECTOR('',#14718,1.);+#14718 = DIRECTION('',(0.,-1.));+#14719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14720 = ORIENTED_EDGE('',*,*,#13469,.T.);+#14721 = ORIENTED_EDGE('',*,*,#14673,.F.);+#14722 = ADVANCED_FACE('',(#14723),#6716,.T.);+#14723 = FACE_BOUND('',#14724,.T.);+#14724 = EDGE_LOOP('',(#14725,#14726,#14747,#14748));+#14725 = ORIENTED_EDGE('',*,*,#6696,.T.);+#14726 = ORIENTED_EDGE('',*,*,#14727,.T.);+#14727 = EDGE_CURVE('',#6652,#13424,#14728,.T.);+#14728 = SURFACE_CURVE('',#14729,(#14733,#14740),.PCURVE_S1.);+#14729 = LINE('',#14730,#14731);+#14730 = CARTESIAN_POINT('',(-0.342202914714,0.118689309923,2.1500001));+#14731 = VECTOR('',#14732,1.);+#14732 = DIRECTION('',(-0.,-0.,-1.));+#14733 = PCURVE('',#6716,#14734);+#14734 = DEFINITIONAL_REPRESENTATION('',(#14735),#14739);+#14735 = LINE('',#14736,#14737);+#14736 = CARTESIAN_POINT('',(0.,0.));+#14737 = VECTOR('',#14738,1.);+#14738 = DIRECTION('',(0.,-1.));+#14739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14740 = PCURVE('',#6677,#14741);+#14741 = DEFINITIONAL_REPRESENTATION('',(#14742),#14746);+#14742 = LINE('',#14743,#14744);+#14743 = CARTESIAN_POINT('',(1.,0.));+#14744 = VECTOR('',#14745,1.);+#14745 = DIRECTION('',(0.,-1.));+#14746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14747 = ORIENTED_EDGE('',*,*,#13446,.T.);+#14748 = ORIENTED_EDGE('',*,*,#14700,.F.);+#14749 = ADVANCED_FACE('',(#14750),#6677,.T.);+#14750 = FACE_BOUND('',#14751,.T.);+#14751 = EDGE_LOOP('',(#14752,#14753,#14774,#14775));+#14752 = ORIENTED_EDGE('',*,*,#6651,.T.);+#14753 = ORIENTED_EDGE('',*,*,#14754,.T.);+#14754 = EDGE_CURVE('',#6616,#13401,#14755,.T.);+#14755 = SURFACE_CURVE('',#14756,(#14760,#14767),.PCURVE_S1.);+#14756 = LINE('',#14757,#14758);+#14757 = CARTESIAN_POINT('',(-0.272638787448,0.153232321573,2.1500001));+#14758 = VECTOR('',#14759,1.);+#14759 = DIRECTION('',(-0.,-0.,-1.));+#14760 = PCURVE('',#6677,#14761);+#14761 = DEFINITIONAL_REPRESENTATION('',(#14762),#14766);+#14762 = LINE('',#14763,#14764);+#14763 = CARTESIAN_POINT('',(0.,0.));+#14764 = VECTOR('',#14765,1.);+#14765 = DIRECTION('',(0.,-1.));+#14766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14767 = PCURVE('',#6635,#14768);+#14768 = DEFINITIONAL_REPRESENTATION('',(#14769),#14773);+#14769 = LINE('',#14770,#14771);+#14770 = CARTESIAN_POINT('',(1.,0.));+#14771 = VECTOR('',#14772,1.);+#14772 = DIRECTION('',(0.,-1.));+#14773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14774 = ORIENTED_EDGE('',*,*,#13423,.T.);+#14775 = ORIENTED_EDGE('',*,*,#14727,.F.);+#14776 = ADVANCED_FACE('',(#14777),#6635,.T.);+#14777 = FACE_BOUND('',#14778,.T.);+#14778 = EDGE_LOOP('',(#14779,#14780,#14801,#14802));+#14779 = ORIENTED_EDGE('',*,*,#6615,.T.);+#14780 = ORIENTED_EDGE('',*,*,#14781,.T.);+#14781 = EDGE_CURVE('',#6580,#13378,#14782,.T.);+#14782 = SURFACE_CURVE('',#14783,(#14787,#14794),.PCURVE_S1.);+#14783 = LINE('',#14784,#14785);+#14784 = CARTESIAN_POINT('',(-0.237259093855,0.14857080789,2.1500001));+#14785 = VECTOR('',#14786,1.);+#14786 = DIRECTION('',(-0.,-0.,-1.));+#14787 = PCURVE('',#6635,#14788);+#14788 = DEFINITIONAL_REPRESENTATION('',(#14789),#14793);+#14789 = LINE('',#14790,#14791);+#14790 = CARTESIAN_POINT('',(0.,0.));+#14791 = VECTOR('',#14792,1.);+#14792 = DIRECTION('',(0.,-1.));+#14793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14794 = PCURVE('',#6599,#14795);+#14795 = DEFINITIONAL_REPRESENTATION('',(#14796),#14800);+#14796 = LINE('',#14797,#14798);+#14797 = CARTESIAN_POINT('',(1.,0.));+#14798 = VECTOR('',#14799,1.);+#14799 = DIRECTION('',(0.,-1.));+#14800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14801 = ORIENTED_EDGE('',*,*,#13400,.T.);+#14802 = ORIENTED_EDGE('',*,*,#14754,.F.);+#14803 = ADVANCED_FACE('',(#14804),#6599,.T.);+#14804 = FACE_BOUND('',#14805,.T.);+#14805 = EDGE_LOOP('',(#14806,#14807,#14828,#14829));+#14806 = ORIENTED_EDGE('',*,*,#6579,.T.);+#14807 = ORIENTED_EDGE('',*,*,#14808,.T.);+#14808 = EDGE_CURVE('',#6553,#13355,#14809,.T.);+#14809 = SURFACE_CURVE('',#14810,(#14814,#14821),.PCURVE_S1.);+#14810 = LINE('',#14811,#14812);+#14811 = CARTESIAN_POINT('',(-0.205226128035,0.135064370809,2.1500001));+#14812 = VECTOR('',#14813,1.);+#14813 = DIRECTION('',(-0.,-0.,-1.));+#14814 = PCURVE('',#6599,#14815);+#14815 = DEFINITIONAL_REPRESENTATION('',(#14816),#14820);+#14816 = LINE('',#14817,#14818);+#14817 = CARTESIAN_POINT('',(0.,0.));+#14818 = VECTOR('',#14819,1.);+#14819 = DIRECTION('',(0.,-1.));+#14820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14821 = PCURVE('',#6568,#14822);+#14822 = DEFINITIONAL_REPRESENTATION('',(#14823),#14827);+#14823 = LINE('',#14824,#14825);+#14824 = CARTESIAN_POINT('',(4.446366897435E-02,0.));+#14825 = VECTOR('',#14826,1.);+#14826 = DIRECTION('',(0.,-1.));+#14827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14828 = ORIENTED_EDGE('',*,*,#13377,.T.);+#14829 = ORIENTED_EDGE('',*,*,#14781,.F.);+#14830 = ADVANCED_FACE('',(#14831),#6568,.T.);+#14831 = FACE_BOUND('',#14832,.T.);+#14832 = EDGE_LOOP('',(#14833,#14834,#14855,#14856));+#14833 = ORIENTED_EDGE('',*,*,#6552,.F.);+#14834 = ORIENTED_EDGE('',*,*,#14835,.T.);+#14835 = EDGE_CURVE('',#6515,#13353,#14836,.T.);+#14836 = SURFACE_CURVE('',#14837,(#14841,#14848),.PCURVE_S1.);+#14837 = LINE('',#14838,#14839);+#14838 = CARTESIAN_POINT('',(-0.205226128035,0.179528039784,2.1500001));+#14839 = VECTOR('',#14840,1.);+#14840 = DIRECTION('',(-0.,-0.,-1.));+#14841 = PCURVE('',#6568,#14842);+#14842 = DEFINITIONAL_REPRESENTATION('',(#14843),#14847);+#14843 = LINE('',#14844,#14845);+#14844 = CARTESIAN_POINT('',(0.,0.));+#14845 = VECTOR('',#14846,1.);+#14846 = DIRECTION('',(0.,-1.));+#14847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14848 = PCURVE('',#6536,#14849);+#14849 = DEFINITIONAL_REPRESENTATION('',(#14850),#14854);+#14850 = LINE('',#14851,#14852);+#14851 = CARTESIAN_POINT('',(1.,0.));+#14852 = VECTOR('',#14853,1.);+#14853 = DIRECTION('',(0.,-1.));+#14854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14855 = ORIENTED_EDGE('',*,*,#13352,.T.);+#14856 = ORIENTED_EDGE('',*,*,#14808,.F.);+#14857 = ADVANCED_FACE('',(#14858),#6536,.T.);+#14858 = FACE_BOUND('',#14859,.T.);+#14859 = EDGE_LOOP('',(#14860,#14861,#14862,#14863));+#14860 = ORIENTED_EDGE('',*,*,#6514,.T.);+#14861 = ORIENTED_EDGE('',*,*,#13328,.T.);+#14862 = ORIENTED_EDGE('',*,*,#13698,.T.);+#14863 = ORIENTED_EDGE('',*,*,#14835,.F.);+#14864 = ADVANCED_FACE('',(#14865),#6496,.T.);+#14865 = FACE_BOUND('',#14866,.T.);+#14866 = EDGE_LOOP('',(#14867,#14868,#14891,#14919));+#14867 = ORIENTED_EDGE('',*,*,#6478,.T.);+#14868 = ORIENTED_EDGE('',*,*,#14869,.T.);+#14869 = EDGE_CURVE('',#6434,#14870,#14872,.T.);+#14870 = VERTEX_POINT('',#14871);+#14871 = CARTESIAN_POINT('',(-0.569541351244,0.193871158808,2.0500001));+#14872 = SURFACE_CURVE('',#14873,(#14877,#14884),.PCURVE_S1.);+#14873 = LINE('',#14874,#14875);+#14874 = CARTESIAN_POINT('',(-0.569541351244,0.193871158808,2.1500001));+#14875 = VECTOR('',#14876,1.);+#14876 = DIRECTION('',(-0.,-0.,-1.));+#14877 = PCURVE('',#6496,#14878);+#14878 = DEFINITIONAL_REPRESENTATION('',(#14879),#14883);+#14879 = LINE('',#14880,#14881);+#14880 = CARTESIAN_POINT('',(0.,0.));+#14881 = VECTOR('',#14882,1.);+#14882 = DIRECTION('',(0.,-1.));+#14883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14884 = PCURVE('',#6459,#14885);+#14885 = DEFINITIONAL_REPRESENTATION('',(#14886),#14890);+#14886 = LINE('',#14887,#14888);+#14887 = CARTESIAN_POINT('',(1.,0.));+#14888 = VECTOR('',#14889,1.);+#14889 = DIRECTION('',(0.,-1.));+#14890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14891 = ORIENTED_EDGE('',*,*,#14892,.T.);+#14892 = EDGE_CURVE('',#14870,#14893,#14895,.T.);+#14893 = VERTEX_POINT('',#14894);+#14894 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.0500001));+#14895 = SURFACE_CURVE('',#14896,(#14900,#14907),.PCURVE_S1.);+#14896 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14897,#14898,#14899),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14897 = CARTESIAN_POINT('',(-0.569541351244,0.193871158808,2.0500001));+#14898 = CARTESIAN_POINT('',(-0.551851504448,0.193871158808,2.0500001));+#14899 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.0500001));+#14900 = PCURVE('',#6496,#14901);+#14901 = DEFINITIONAL_REPRESENTATION('',(#14902),#14906);+#14902 = LINE('',#14903,#14904);+#14903 = CARTESIAN_POINT('',(0.,-0.1));+#14904 = VECTOR('',#14905,1.);+#14905 = DIRECTION('',(1.,0.));+#14906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14907 = PCURVE('',#14908,#14913);+#14908 = PLANE('',#14909);+#14909 = AXIS2_PLACEMENT_3D('',#14910,#14911,#14912);+#14910 = CARTESIAN_POINT('',(-0.736877739857,-0.169487856467,2.0500001)+ );+#14911 = DIRECTION('',(0.,0.,1.));+#14912 = DIRECTION('',(1.,0.,0.));+#14913 = DEFINITIONAL_REPRESENTATION('',(#14914),#14918);+#14914 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14915,#14916,#14917),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14915 = CARTESIAN_POINT('',(0.167336388613,0.363359015274));+#14916 = CARTESIAN_POINT('',(0.185026235409,0.363359015274));+#14917 = CARTESIAN_POINT('',(0.202716082206,0.359653709526));+#14918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14919 = ORIENTED_EDGE('',*,*,#14920,.F.);+#14920 = EDGE_CURVE('',#5855,#14893,#14921,.T.);+#14921 = SURFACE_CURVE('',#14922,(#14926,#14933),.PCURVE_S1.);+#14922 = LINE('',#14923,#14924);+#14923 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.1500001));+#14924 = VECTOR('',#14925,1.);+#14925 = DIRECTION('',(-0.,-0.,-1.));+#14926 = PCURVE('',#6496,#14927);+#14927 = DEFINITIONAL_REPRESENTATION('',(#14928),#14932);+#14928 = LINE('',#14929,#14930);+#14929 = CARTESIAN_POINT('',(1.,0.));+#14930 = VECTOR('',#14931,1.);+#14931 = DIRECTION('',(0.,-1.));+#14932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14933 = PCURVE('',#5874,#14934);+#14934 = DEFINITIONAL_REPRESENTATION('',(#14935),#14939);+#14935 = LINE('',#14936,#14937);+#14936 = CARTESIAN_POINT('',(0.,0.));+#14937 = VECTOR('',#14938,1.);+#14938 = DIRECTION('',(0.,-1.));+#14939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14940 = ADVANCED_FACE('',(#14941,#15310),#14908,.T.);+#14941 = FACE_BOUND('',#14942,.F.);+#14942 = EDGE_LOOP('',(#14943,#14968,#14991,#15014,#15037,#15060,#15083,+ #15106,#15129,#15152,#15175,#15198,#15221,#15244,#15267,#15288,+ #15289));+#14943 = ORIENTED_EDGE('',*,*,#14944,.T.);+#14944 = EDGE_CURVE('',#14945,#14947,#14949,.T.);+#14945 = VERTEX_POINT('',#14946);+#14946 = CARTESIAN_POINT('',(-0.499977223978,0.179528039784,2.0500001));+#14947 = VERTEX_POINT('',#14948);+#14948 = CARTESIAN_POINT('',(-0.499977223978,0.135064370809,2.0500001));+#14949 = SURFACE_CURVE('',#14950,(#14954,#14961),.PCURVE_S1.);+#14950 = LINE('',#14951,#14952);+#14951 = CARTESIAN_POINT('',(-0.499977223978,0.179528039784,2.0500001));+#14952 = VECTOR('',#14953,1.);+#14953 = DIRECTION('',(0.,-1.,0.));+#14954 = PCURVE('',#14908,#14955);+#14955 = DEFINITIONAL_REPRESENTATION('',(#14956),#14960);+#14956 = LINE('',#14957,#14958);+#14957 = CARTESIAN_POINT('',(0.236900515879,0.34901589625));+#14958 = VECTOR('',#14959,1.);+#14959 = DIRECTION('',(0.,-1.));+#14960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14961 = PCURVE('',#5906,#14962);+#14962 = DEFINITIONAL_REPRESENTATION('',(#14963),#14967);+#14963 = LINE('',#14964,#14965);+#14964 = CARTESIAN_POINT('',(0.,-0.1));+#14965 = VECTOR('',#14966,1.);+#14966 = DIRECTION('',(1.,0.));+#14967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14968 = ORIENTED_EDGE('',*,*,#14969,.T.);+#14969 = EDGE_CURVE('',#14947,#14970,#14972,.T.);+#14970 = VERTEX_POINT('',#14971);+#14971 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.0500001));+#14972 = SURFACE_CURVE('',#14973,(#14977,#14984),.PCURVE_S1.);+#14973 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14974,#14975,#14976),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14974 = CARTESIAN_POINT('',(-0.499977223978,0.135064370809,2.0500001));+#14975 = CARTESIAN_POINT('',(-0.515037498953,0.143909294207,2.0500001));+#14976 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.0500001));+#14977 = PCURVE('',#14908,#14978);+#14978 = DEFINITIONAL_REPRESENTATION('',(#14979),#14983);+#14979 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14980,#14981,#14982),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14980 = CARTESIAN_POINT('',(0.236900515879,0.304552227276));+#14981 = CARTESIAN_POINT('',(0.221840240904,0.313397150674));+#14982 = CARTESIAN_POINT('',(0.204867550059,0.318058664357));+#14983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14984 = PCURVE('',#5937,#14985);+#14985 = DEFINITIONAL_REPRESENTATION('',(#14986),#14990);+#14986 = LINE('',#14987,#14988);+#14987 = CARTESIAN_POINT('',(0.,-0.1));+#14988 = VECTOR('',#14989,1.);+#14989 = DIRECTION('',(1.,0.));+#14990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14991 = ORIENTED_EDGE('',*,*,#14992,.T.);+#14992 = EDGE_CURVE('',#14970,#14993,#14995,.T.);+#14993 = VERTEX_POINT('',#14994);+#14994 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.0500001));+#14995 = SURFACE_CURVE('',#14996,(#15000,#15007),.PCURVE_S1.);+#14996 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14997,#14998,#14999),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14997 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.0500001));+#14998 = CARTESIAN_POINT('',(-0.548982880643,0.153232321573,2.0500001));+#14999 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.0500001));+#15000 = PCURVE('',#14908,#15001);+#15001 = DEFINITIONAL_REPRESENTATION('',(#15002),#15006);+#15002 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15003,#15004,#15005),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15003 = CARTESIAN_POINT('',(0.204867550059,0.318058664357));+#15004 = CARTESIAN_POINT('',(0.187894859214,0.32272017804));+#15005 = CARTESIAN_POINT('',(0.169487856467,0.32272017804));+#15006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15007 = PCURVE('',#5973,#15008);+#15008 = DEFINITIONAL_REPRESENTATION('',(#15009),#15013);+#15009 = LINE('',#15010,#15011);+#15010 = CARTESIAN_POINT('',(0.,-0.1));+#15011 = VECTOR('',#15012,1.);+#15012 = DIRECTION('',(1.,0.));+#15013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15014 = ORIENTED_EDGE('',*,*,#15015,.T.);+#15015 = EDGE_CURVE('',#14993,#15016,#15018,.T.);+#15016 = VERTEX_POINT('',#15017);+#15017 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.0500001));+#15018 = SURFACE_CURVE('',#15019,(#15023,#15030),.PCURVE_S1.);+#15019 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15020,#15021,#15022),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15020 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.0500001));+#15021 = CARTESIAN_POINT('',(-0.613287864267,0.153232321573,2.0500001));+#15022 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.0500001));+#15023 = PCURVE('',#14908,#15024);+#15024 = DEFINITIONAL_REPRESENTATION('',(#15025),#15029);+#15025 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15026,#15027,#15028),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15026 = CARTESIAN_POINT('',(0.169487856467,0.32272017804));+#15027 = CARTESIAN_POINT('',(0.12358987559,0.32272017804));+#15028 = CARTESIAN_POINT('',(9.992372920041E-02,0.28817716639));+#15029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15030 = PCURVE('',#6015,#15031);+#15031 = DEFINITIONAL_REPRESENTATION('',(#15032),#15036);+#15032 = LINE('',#15033,#15034);+#15033 = CARTESIAN_POINT('',(0.,-0.1));+#15034 = VECTOR('',#15035,1.);+#15035 = DIRECTION('',(1.,0.));+#15036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15037 = ORIENTED_EDGE('',*,*,#15038,.T.);+#15038 = EDGE_CURVE('',#15016,#15039,#15041,.T.);+#15039 = VERTEX_POINT('',#15040);+#15040 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,+ 2.0500001));+#15041 = SURFACE_CURVE('',#15042,(#15046,#15053),.PCURVE_S1.);+#15042 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15043,#15044,#15045),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15043 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.0500001));+#15044 = CARTESIAN_POINT('',(-0.660620157046,8.414629827403E-02,+ 2.0500001));+#15045 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,+ 2.0500001));+#15046 = PCURVE('',#14908,#15047);+#15047 = DEFINITIONAL_REPRESENTATION('',(#15048),#15052);+#15048 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15049,#15050,#15051),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15049 = CARTESIAN_POINT('',(9.992372920041E-02,0.28817716639));+#15050 = CARTESIAN_POINT('',(7.625758281084E-02,0.253634154741));+#15051 = CARTESIAN_POINT('',(7.625758281084E-02,0.186460547312));+#15052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15053 = PCURVE('',#6054,#15054);+#15054 = DEFINITIONAL_REPRESENTATION('',(#15055),#15059);+#15055 = LINE('',#15056,#15057);+#15056 = CARTESIAN_POINT('',(0.,-0.1));+#15057 = VECTOR('',#15058,1.);+#15058 = DIRECTION('',(1.,0.));+#15059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15060 = ORIENTED_EDGE('',*,*,#15061,.T.);+#15061 = EDGE_CURVE('',#15039,#15062,#15064,.T.);+#15062 = VERTEX_POINT('',#15063);+#15063 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.0500001+ ));+#15064 = SURFACE_CURVE('',#15065,(#15069,#15076),.PCURVE_S1.);+#15065 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15066,#15067,#15068),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15066 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,+ 2.0500001));+#15067 = CARTESIAN_POINT('',(-0.649145661827,4.087788921835E-02,+ 2.0500001));+#15068 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.0500001+ ));+#15069 = PCURVE('',#14908,#15070);+#15070 = DEFINITIONAL_REPRESENTATION('',(#15071),#15075);+#15071 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15072,#15073,#15074),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15072 = CARTESIAN_POINT('',(7.625758281084E-02,0.186460547312));+#15073 = CARTESIAN_POINT('',(8.773207803003E-02,0.210365745685));+#15074 = CARTESIAN_POINT('',(0.108051496647,0.223155026815));+#15075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15076 = PCURVE('',#6096,#15077);+#15077 = DEFINITIONAL_REPRESENTATION('',(#15078),#15082);+#15078 = LINE('',#15079,#15080);+#15079 = CARTESIAN_POINT('',(0.,-0.1));+#15080 = VECTOR('',#15081,1.);+#15081 = DIRECTION('',(1.,0.));+#15082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15083 = ORIENTED_EDGE('',*,*,#15084,.T.);+#15084 = EDGE_CURVE('',#15062,#15085,#15087,.T.);+#15085 = VERTEX_POINT('',#15086);+#15086 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,+ 2.0500001));+#15087 = SURFACE_CURVE('',#15088,(#15092,#15099),.PCURVE_S1.);+#15088 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15089,#15090,#15091),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15089 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.0500001+ ));+#15090 = CARTESIAN_POINT('',(-0.608506824592,6.645645147779E-02,+ 2.0500001));+#15091 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,+ 2.0500001));+#15092 = PCURVE('',#14908,#15093);+#15093 = DEFINITIONAL_REPRESENTATION('',(#15094),#15098);+#15094 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15095,#15096,#15097),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15095 = CARTESIAN_POINT('',(0.108051496647,0.223155026815));+#15096 = CARTESIAN_POINT('',(0.128370915265,0.235944307945));+#15097 = CARTESIAN_POINT('',(0.154666633475,0.235944307945));+#15098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15099 = PCURVE('',#6135,#15100);+#15100 = DEFINITIONAL_REPRESENTATION('',(#15101),#15105);+#15101 = LINE('',#15102,#15103);+#15102 = CARTESIAN_POINT('',(0.,-0.1));+#15103 = VECTOR('',#15104,1.);+#15104 = DIRECTION('',(1.,0.));+#15105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15106 = ORIENTED_EDGE('',*,*,#15107,.T.);+#15107 = EDGE_CURVE('',#15085,#15108,#15110,.T.);+#15108 = VERTEX_POINT('',#15109);+#15109 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,+ 2.0500001));+#15110 = SURFACE_CURVE('',#15111,(#15115,#15122),.PCURVE_S1.);+#15111 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15112,#15113,#15114),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15112 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,+ 2.0500001));+#15113 = CARTESIAN_POINT('',(-0.530575877895,6.645645147779E-02,+ 2.0500001));+#15114 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,+ 2.0500001));+#15115 = PCURVE('',#14908,#15116);+#15116 = DEFINITIONAL_REPRESENTATION('',(#15117),#15121);+#15117 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15118,#15119,#15120),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15118 = CARTESIAN_POINT('',(0.154666633475,0.235944307945));+#15119 = CARTESIAN_POINT('',(0.206301861962,0.235944307945));+#15120 = CARTESIAN_POINT('',(0.234629522034,0.2042699201));+#15121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15122 = PCURVE('',#6177,#15123);+#15123 = DEFINITIONAL_REPRESENTATION('',(#15124),#15128);+#15124 = LINE('',#15125,#15126);+#15125 = CARTESIAN_POINT('',(0.,-0.1));+#15126 = VECTOR('',#15127,1.);+#15127 = DIRECTION('',(1.,0.));+#15128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15129 = ORIENTED_EDGE('',*,*,#15130,.T.);+#15130 = EDGE_CURVE('',#15108,#15131,#15133,.T.);+#15131 = VERTEX_POINT('',#15132);+#15132 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,+ 2.0500001));+#15133 = SURFACE_CURVE('',#15134,(#15138,#15145),.PCURVE_S1.);+#15134 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15135,#15136,#15137),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15135 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,+ 2.0500001));+#15136 = CARTESIAN_POINT('',(-0.473920557751,3.10767578853E-03,2.0500001+ ));+#15137 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,+ 2.0500001));+#15138 = PCURVE('',#14908,#15139);+#15139 = DEFINITIONAL_REPRESENTATION('',(#15140),#15144);+#15140 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15141,#15142,#15143),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15141 = CARTESIAN_POINT('',(0.234629522034,0.2042699201));+#15142 = CARTESIAN_POINT('',(0.262957182106,0.172595532255));+#15143 = CARTESIAN_POINT('',(0.262957182106,0.114505900208));+#15144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15145 = PCURVE('',#6216,#15146);+#15146 = DEFINITIONAL_REPRESENTATION('',(#15147),#15151);+#15147 = LINE('',#15148,#15149);+#15148 = CARTESIAN_POINT('',(0.,-0.1));+#15149 = VECTOR('',#15150,1.);+#15150 = DIRECTION('',(1.,0.));+#15151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15152 = ORIENTED_EDGE('',*,*,#15153,.T.);+#15153 = EDGE_CURVE('',#15131,#15154,#15156,.T.);+#15154 = VERTEX_POINT('',#15155);+#15155 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.0500001)+ );+#15156 = SURFACE_CURVE('',#15157,(#15161,#15168),.PCURVE_S1.);+#15157 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15158,#15159,#15160),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15158 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,+ 2.0500001));+#15159 = CARTESIAN_POINT('',(-0.473920557751,-0.112832536322,2.0500001)+ );+#15160 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.0500001)+ );+#15161 = PCURVE('',#14908,#15162);+#15162 = DEFINITIONAL_REPRESENTATION('',(#15163),#15167);+#15163 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15164,#15165,#15166),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15164 = CARTESIAN_POINT('',(0.262957182106,0.114505900208));+#15165 = CARTESIAN_POINT('',(0.262957182106,5.665532014473E-02));+#15166 = CARTESIAN_POINT('',(0.233792840091,2.486140630824E-02));+#15167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15168 = PCURVE('',#6252,#15169);+#15169 = DEFINITIONAL_REPRESENTATION('',(#15170),#15174);+#15170 = LINE('',#15171,#15172);+#15171 = CARTESIAN_POINT('',(0.,-0.1));+#15172 = VECTOR('',#15173,1.);+#15173 = DIRECTION('',(1.,0.));+#15174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15175 = ORIENTED_EDGE('',*,*,#15176,.T.);+#15176 = EDGE_CURVE('',#15154,#15177,#15179,.T.);+#15177 = VERTEX_POINT('',#15178);+#15178 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.0500001)+ );+#15179 = SURFACE_CURVE('',#15180,(#15184,#15191),.PCURVE_S1.);+#15180 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15181,#15182,#15183),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15181 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.0500001)+ );+#15182 = CARTESIAN_POINT('',(-0.532249241782,-0.176420363995,2.0500001)+ );+#15183 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.0500001)+ );+#15184 = PCURVE('',#14908,#15185);+#15185 = DEFINITIONAL_REPRESENTATION('',(#15186),#15190);+#15186 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15187,#15188,#15189),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15187 = CARTESIAN_POINT('',(0.233792840091,2.486140630824E-02));+#15188 = CARTESIAN_POINT('',(0.204628498075,-6.932507528258E-03));+#15189 = CARTESIAN_POINT('',(0.15179800967,-6.932507528258E-03));+#15190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15191 = PCURVE('',#6294,#15192);+#15192 = DEFINITIONAL_REPRESENTATION('',(#15193),#15197);+#15193 = LINE('',#15194,#15195);+#15194 = CARTESIAN_POINT('',(0.,-0.1));+#15195 = VECTOR('',#15196,1.);+#15196 = DIRECTION('',(1.,0.));+#15197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15198 = ORIENTED_EDGE('',*,*,#15199,.T.);+#15199 = EDGE_CURVE('',#15177,#15200,#15202,.T.);+#15200 = VERTEX_POINT('',#15201);+#15201 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.0500001)+ );+#15202 = SURFACE_CURVE('',#15203,(#15207,#15214),.PCURVE_S1.);+#15203 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15204,#15205,#15206),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15204 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.0500001)+ );+#15205 = CARTESIAN_POINT('',(-0.647233245957,-0.176420363995,2.0500001)+ );+#15206 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.0500001)+ );+#15207 = PCURVE('',#14908,#15208);+#15208 = DEFINITIONAL_REPRESENTATION('',(#15209),#15213);+#15209 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15210,#15211,#15212),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15210 = CARTESIAN_POINT('',(0.15179800967,-6.932507528258E-03));+#15211 = CARTESIAN_POINT('',(8.964449389989E-02,-6.932507528258E-03));+#15212 = CARTESIAN_POINT('',(6.071920386819E-02,3.765068743795E-02));+#15213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15214 = PCURVE('',#6339,#15215);+#15215 = DEFINITIONAL_REPRESENTATION('',(#15216),#15220);+#15216 = LINE('',#15217,#15218);+#15217 = CARTESIAN_POINT('',(0.,-0.1));+#15218 = VECTOR('',#15219,1.);+#15219 = DIRECTION('',(1.,0.));+#15220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15221 = ORIENTED_EDGE('',*,*,#15222,.T.);+#15222 = EDGE_CURVE('',#15200,#15223,#15225,.T.);+#15223 = VERTEX_POINT('',#15224);+#15224 = CARTESIAN_POINT('',(-0.705083826021,8.60587141439E-03,2.0500001+ ));+#15225 = SURFACE_CURVE('',#15226,(#15230,#15237),.PCURVE_S1.);+#15226 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15227,#15228,#15229),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15227 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.0500001)+ );+#15228 = CARTESIAN_POINT('',(-0.705083826021,-8.725397406256E-02,+ 2.0500001));+#15229 = CARTESIAN_POINT('',(-0.705083826021,8.60587141439E-03,2.0500001+ ));+#15230 = PCURVE('',#14908,#15231);+#15231 = DEFINITIONAL_REPRESENTATION('',(#15232),#15236);+#15232 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15233,#15234,#15235),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15233 = CARTESIAN_POINT('',(6.071920386819E-02,3.765068743795E-02));+#15234 = CARTESIAN_POINT('',(3.17939138365E-02,8.223388240417E-02));+#15235 = CARTESIAN_POINT('',(3.17939138365E-02,0.178093727881));+#15236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15237 = PCURVE('',#6380,#15238);+#15238 = DEFINITIONAL_REPRESENTATION('',(#15239),#15243);+#15239 = LINE('',#15240,#15241);+#15240 = CARTESIAN_POINT('',(0.,-0.1));+#15241 = VECTOR('',#15242,1.);+#15242 = DIRECTION('',(1.,0.));+#15243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15244 = ORIENTED_EDGE('',*,*,#15245,.T.);+#15245 = EDGE_CURVE('',#15223,#15246,#15248,.T.);+#15246 = VERTEX_POINT('',#15247);+#15247 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.0500001));+#15248 = SURFACE_CURVE('',#15249,(#15253,#15260),.PCURVE_S1.);+#15249 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15250,#15251,#15252),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15250 = CARTESIAN_POINT('',(-0.705083826021,8.60587141439E-03,2.0500001+ ));+#15251 = CARTESIAN_POINT('',(-0.705083826021,9.896752126548E-02,+ 2.0500001));+#15252 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.0500001));+#15253 = PCURVE('',#14908,#15254);+#15254 = DEFINITIONAL_REPRESENTATION('',(#15255),#15259);+#15255 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15256,#15257,#15258),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15256 = CARTESIAN_POINT('',(3.17939138365E-02,0.178093727881));+#15257 = CARTESIAN_POINT('',(3.17939138365E-02,0.268455377732));+#15258 = CARTESIAN_POINT('',(6.657597746965E-02,0.315907196503));+#15259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15260 = PCURVE('',#6417,#15261);+#15261 = DEFINITIONAL_REPRESENTATION('',(#15262),#15266);+#15262 = LINE('',#15263,#15264);+#15263 = CARTESIAN_POINT('',(0.,-0.1));+#15264 = VECTOR('',#15265,1.);+#15265 = DIRECTION('',(1.,0.));+#15266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15267 = ORIENTED_EDGE('',*,*,#15268,.T.);+#15268 = EDGE_CURVE('',#15246,#14870,#15269,.T.);+#15269 = SURFACE_CURVE('',#15270,(#15274,#15281),.PCURVE_S1.);+#15270 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15271,#15272,#15273),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15271 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.0500001));+#15272 = CARTESIAN_POINT('',(-0.635519698754,0.193871158808,2.0500001));+#15273 = CARTESIAN_POINT('',(-0.569541351244,0.193871158808,2.0500001));+#15274 = PCURVE('',#14908,#15275);+#15275 = DEFINITIONAL_REPRESENTATION('',(#15276),#15280);+#15276 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15277,#15278,#15279),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15277 = CARTESIAN_POINT('',(6.657597746965E-02,0.315907196503));+#15278 = CARTESIAN_POINT('',(0.101358041103,0.363359015274));+#15279 = CARTESIAN_POINT('',(0.167336388613,0.363359015274));+#15280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15281 = PCURVE('',#6459,#15282);+#15282 = DEFINITIONAL_REPRESENTATION('',(#15283),#15287);+#15283 = LINE('',#15284,#15285);+#15284 = CARTESIAN_POINT('',(0.,-0.1));+#15285 = VECTOR('',#15286,1.);+#15286 = DIRECTION('',(1.,0.));+#15287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15288 = ORIENTED_EDGE('',*,*,#14892,.T.);+#15289 = ORIENTED_EDGE('',*,*,#15290,.T.);+#15290 = EDGE_CURVE('',#14893,#14945,#15291,.T.);+#15291 = SURFACE_CURVE('',#15292,(#15296,#15303),.PCURVE_S1.);+#15292 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15293,#15294,#15295),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15293 = CARTESIAN_POINT('',(-0.534161657651,0.19016585306,2.0500001));+#15294 = CARTESIAN_POINT('',(-0.516471810855,0.186460547312,2.0500001));+#15295 = CARTESIAN_POINT('',(-0.499977223978,0.179528039784,2.0500001));+#15296 = PCURVE('',#14908,#15297);+#15297 = DEFINITIONAL_REPRESENTATION('',(#15298),#15302);+#15298 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15299,#15300,#15301),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15299 = CARTESIAN_POINT('',(0.202716082206,0.359653709526));+#15300 = CARTESIAN_POINT('',(0.220405929002,0.355948403779));+#15301 = CARTESIAN_POINT('',(0.236900515879,0.34901589625));+#15302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15303 = PCURVE('',#5874,#15304);+#15304 = DEFINITIONAL_REPRESENTATION('',(#15305),#15309);+#15305 = LINE('',#15306,#15307);+#15306 = CARTESIAN_POINT('',(0.,-0.1));+#15307 = VECTOR('',#15308,1.);+#15308 = DIRECTION('',(1.,0.));+#15309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15310 = FACE_BOUND('',#15311,.F.);+#15311 = EDGE_LOOP('',(#15312,#15344,#15374,#15404,#15434,#15464,#15494,+ #15524));+#15312 = ORIENTED_EDGE('',*,*,#15313,.T.);+#15313 = EDGE_CURVE('',#15314,#15316,#15318,.T.);+#15314 = VERTEX_POINT('',#15315);+#15315 = CARTESIAN_POINT('',(-0.586035938122,2.868623804797E-02,+ 2.0500001));+#15316 = VERTEX_POINT('',#15317);+#15317 = CARTESIAN_POINT('',(-0.634563490819,6.454403560792E-03,+ 2.0500001));+#15318 = SURFACE_CURVE('',#15319,(#15323,#15330),.PCURVE_S1.);+#15319 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15320,#15321,#15322),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15320 = CARTESIAN_POINT('',(-0.586035938122,2.868623804797E-02,+ 2.0500001));+#15321 = CARTESIAN_POINT('',(-0.616873644023,2.868623804797E-02,+ 2.0500001));+#15322 = CARTESIAN_POINT('',(-0.634563490819,6.454403560792E-03,+ 2.0500001));+#15323 = PCURVE('',#14908,#15324);+#15324 = DEFINITIONAL_REPRESENTATION('',(#15325),#15329);+#15325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15326,#15327,#15328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15326 = CARTESIAN_POINT('',(0.150841801736,0.198174094515));+#15327 = CARTESIAN_POINT('',(0.120004095834,0.198174094515));+#15328 = CARTESIAN_POINT('',(0.102314249038,0.175942260028));+#15329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15330 = PCURVE('',#15331,#15338);+#15331 = SURFACE_OF_LINEAR_EXTRUSION('',#15332,#15336);+#15332 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15333,#15334,#15335),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15333 = CARTESIAN_POINT('',(-0.586035938122,2.868623804797E-02,+ 2.1500001));+#15334 = CARTESIAN_POINT('',(-0.616873644023,2.868623804797E-02,+ 2.1500001));+#15335 = CARTESIAN_POINT('',(-0.634563490819,6.454403560792E-03,+ 2.1500001));+#15336 = VECTOR('',#15337,1.);+#15337 = DIRECTION('',(0.,0.,1.));+#15338 = DEFINITIONAL_REPRESENTATION('',(#15339),#15343);+#15339 = LINE('',#15340,#15341);+#15340 = CARTESIAN_POINT('',(0.,-0.1));+#15341 = VECTOR('',#15342,1.);+#15342 = DIRECTION('',(1.,0.));+#15343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15344 = ORIENTED_EDGE('',*,*,#15345,.T.);+#15345 = EDGE_CURVE('',#15316,#15346,#15348,.T.);+#15346 = VERTEX_POINT('',#15347);+#15347 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,+ 2.0500001));+#15348 = SURFACE_CURVE('',#15349,(#15353,#15360),.PCURVE_S1.);+#15349 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15350,#15351,#15352),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15350 = CARTESIAN_POINT('',(-0.634563490819,6.454403560792E-03,+ 2.0500001));+#15351 = CARTESIAN_POINT('',(-0.652253337616,-1.577743092638E-02,+ 2.0500001));+#15352 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,+ 2.0500001));+#15353 = PCURVE('',#14908,#15354);+#15354 = DEFINITIONAL_REPRESENTATION('',(#15355),#15359);+#15355 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15356,#15357,#15358),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15356 = CARTESIAN_POINT('',(0.102314249038,0.175942260028));+#15357 = CARTESIAN_POINT('',(8.46244022415E-02,0.15371042554));+#15358 = CARTESIAN_POINT('',(8.46244022415E-02,0.114505900208));+#15359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15360 = PCURVE('',#15361,#15368);+#15361 = SURFACE_OF_LINEAR_EXTRUSION('',#15362,#15366);+#15362 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15363,#15364,#15365),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15363 = CARTESIAN_POINT('',(-0.634563490819,6.454403560792E-03,+ 2.1500001));+#15364 = CARTESIAN_POINT('',(-0.652253337616,-1.577743092638E-02,+ 2.1500001));+#15365 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,+ 2.1500001));+#15366 = VECTOR('',#15367,1.);+#15367 = DIRECTION('',(0.,0.,1.));+#15368 = DEFINITIONAL_REPRESENTATION('',(#15369),#15373);+#15369 = LINE('',#15370,#15371);+#15370 = CARTESIAN_POINT('',(0.,-0.1));+#15371 = VECTOR('',#15372,1.);+#15372 = DIRECTION('',(1.,0.));+#15373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15374 = ORIENTED_EDGE('',*,*,#15375,.T.);+#15375 = EDGE_CURVE('',#15346,#15376,#15378,.T.);+#15376 = VERTEX_POINT('',#15377);+#15377 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.0500001)+ );+#15378 = SURFACE_CURVE('',#15379,(#15383,#15390),.PCURVE_S1.);+#15379 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15380,#15381,#15382),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15380 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,+ 2.0500001));+#15381 = CARTESIAN_POINT('',(-0.652253337616,-9.418648159082E-02,+ 2.0500001));+#15382 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.0500001)+ );+#15383 = PCURVE('',#14908,#15384);+#15384 = DEFINITIONAL_REPRESENTATION('',(#15385),#15389);+#15385 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15386,#15387,#15388),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15386 = CARTESIAN_POINT('',(8.46244022415E-02,0.114505900208));+#15387 = CARTESIAN_POINT('',(8.46244022415E-02,7.530137487591E-02));+#15388 = CARTESIAN_POINT('',(0.102314249038,5.306954038874E-02));+#15389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15390 = PCURVE('',#15391,#15398);+#15391 = SURFACE_OF_LINEAR_EXTRUSION('',#15392,#15396);+#15392 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15393,#15394,#15395),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15393 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,+ 2.1500001));+#15394 = CARTESIAN_POINT('',(-0.652253337616,-9.418648159082E-02,+ 2.1500001));+#15395 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.1500001)+ );+#15396 = VECTOR('',#15397,1.);+#15397 = DIRECTION('',(0.,0.,1.));+#15398 = DEFINITIONAL_REPRESENTATION('',(#15399),#15403);+#15399 = LINE('',#15400,#15401);+#15400 = CARTESIAN_POINT('',(0.,-0.1));+#15401 = VECTOR('',#15402,1.);+#15402 = DIRECTION('',(1.,0.));+#15403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15404 = ORIENTED_EDGE('',*,*,#15405,.T.);+#15405 = EDGE_CURVE('',#15376,#15406,#15408,.T.);+#15406 = VERTEX_POINT('',#15407);+#15407 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.0500001)+ );+#15408 = SURFACE_CURVE('',#15409,(#15413,#15420),.PCURVE_S1.);+#15409 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15410,#15411,#15412),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15410 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.0500001)+ );+#15411 = CARTESIAN_POINT('',(-0.616873644023,-0.138650150565,2.0500001)+ );+#15412 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.0500001)+ );+#15413 = PCURVE('',#14908,#15414);+#15414 = DEFINITIONAL_REPRESENTATION('',(#15415),#15419);+#15415 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15416,#15417,#15418),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15416 = CARTESIAN_POINT('',(0.102314249038,5.306954038874E-02));+#15417 = CARTESIAN_POINT('',(0.120004095834,3.083770590156E-02));+#15418 = CARTESIAN_POINT('',(0.150841801736,3.083770590156E-02));+#15419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15420 = PCURVE('',#15421,#15428);+#15421 = SURFACE_OF_LINEAR_EXTRUSION('',#15422,#15426);+#15422 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15423,#15424,#15425),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15423 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.1500001)+ );+#15424 = CARTESIAN_POINT('',(-0.616873644023,-0.138650150565,2.1500001)+ );+#15425 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.1500001)+ );+#15426 = VECTOR('',#15427,1.);+#15427 = DIRECTION('',(0.,0.,1.));+#15428 = DEFINITIONAL_REPRESENTATION('',(#15429),#15433);+#15429 = LINE('',#15430,#15431);+#15430 = CARTESIAN_POINT('',(0.,-0.1));+#15431 = VECTOR('',#15432,1.);+#15432 = DIRECTION('',(1.,0.));+#15433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15434 = ORIENTED_EDGE('',*,*,#15435,.T.);+#15435 = EDGE_CURVE('',#15406,#15436,#15438,.T.);+#15436 = VERTEX_POINT('',#15437);+#15437 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.0500001)+ );+#15438 = SURFACE_CURVE('',#15439,(#15443,#15450),.PCURVE_S1.);+#15439 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15440,#15441,#15442),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15440 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.0500001)+ );+#15441 = CARTESIAN_POINT('',(-0.554002972301,-0.138650150565,2.0500001)+ );+#15442 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.0500001)+ );+#15443 = PCURVE('',#14908,#15444);+#15444 = DEFINITIONAL_REPRESENTATION('',(#15445),#15449);+#15445 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15446,#15447,#15448),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15446 = CARTESIAN_POINT('',(0.150841801736,3.083770590156E-02));+#15447 = CARTESIAN_POINT('',(0.182874767556,3.083770590156E-02));+#15448 = CARTESIAN_POINT('',(0.19913030245,5.199380646194E-02));+#15449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15450 = PCURVE('',#15451,#15458);+#15451 = SURFACE_OF_LINEAR_EXTRUSION('',#15452,#15456);+#15452 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15453,#15454,#15455),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15453 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.1500001)+ );+#15454 = CARTESIAN_POINT('',(-0.554002972301,-0.138650150565,2.1500001)+ );+#15455 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.1500001)+ );+#15456 = VECTOR('',#15457,1.);+#15457 = DIRECTION('',(0.,0.,1.));+#15458 = DEFINITIONAL_REPRESENTATION('',(#15459),#15463);+#15459 = LINE('',#15460,#15461);+#15460 = CARTESIAN_POINT('',(0.,-0.1));+#15461 = VECTOR('',#15462,1.);+#15462 = DIRECTION('',(1.,0.));+#15463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15464 = ORIENTED_EDGE('',*,*,#15465,.T.);+#15465 = EDGE_CURVE('',#15436,#15466,#15468,.T.);+#15466 = VERTEX_POINT('',#15467);+#15467 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,+ 2.0500001));+#15468 = SURFACE_CURVE('',#15469,(#15473,#15480),.PCURVE_S1.);+#15469 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15470,#15471,#15472),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15470 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.0500001)+ );+#15471 = CARTESIAN_POINT('',(-0.521491902514,-9.633794944442E-02,+ 2.0500001));+#15472 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,+ 2.0500001));+#15473 = PCURVE('',#14908,#15474);+#15474 = DEFINITIONAL_REPRESENTATION('',(#15475),#15479);+#15475 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15476,#15477,#15478),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15476 = CARTESIAN_POINT('',(0.19913030245,5.199380646194E-02));+#15477 = CARTESIAN_POINT('',(0.215385837343,7.314990702231E-02));+#15478 = CARTESIAN_POINT('',(0.215385837343,0.114505900208));+#15479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15480 = PCURVE('',#15481,#15488);+#15481 = SURFACE_OF_LINEAR_EXTRUSION('',#15482,#15486);+#15482 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15483,#15484,#15485),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15483 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.1500001)+ );+#15484 = CARTESIAN_POINT('',(-0.521491902514,-9.633794944442E-02,+ 2.1500001));+#15485 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,+ 2.1500001));+#15486 = VECTOR('',#15487,1.);+#15487 = DIRECTION('',(0.,0.,1.));+#15488 = DEFINITIONAL_REPRESENTATION('',(#15489),#15493);+#15489 = LINE('',#15490,#15491);+#15490 = CARTESIAN_POINT('',(0.,-0.1));+#15491 = VECTOR('',#15492,1.);+#15492 = DIRECTION('',(1.,0.));+#15493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15494 = ORIENTED_EDGE('',*,*,#15495,.T.);+#15495 = EDGE_CURVE('',#15466,#15496,#15498,.T.);+#15496 = VERTEX_POINT('',#15497);+#15497 = CARTESIAN_POINT('',(-0.537747437407,7.649663479457E-03,+ 2.0500001));+#15498 = SURFACE_CURVE('',#15499,(#15503,#15510),.PCURVE_S1.);+#15499 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15500,#15501,#15502),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15500 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,+ 2.0500001));+#15501 = CARTESIAN_POINT('',(-0.521491902514,-1.338691108905E-02,+ 2.0500001));+#15502 = CARTESIAN_POINT('',(-0.537747437407,7.649663479457E-03,+ 2.0500001));+#15503 = PCURVE('',#14908,#15504);+#15504 = DEFINITIONAL_REPRESENTATION('',(#15505),#15509);+#15505 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15506,#15507,#15508),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15506 = CARTESIAN_POINT('',(0.215385837343,0.114505900208));+#15507 = CARTESIAN_POINT('',(0.215385837343,0.156100945378));+#15508 = CARTESIAN_POINT('',(0.19913030245,0.177137519946));+#15509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15510 = PCURVE('',#15511,#15518);+#15511 = SURFACE_OF_LINEAR_EXTRUSION('',#15512,#15516);+#15512 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15513,#15514,#15515),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15513 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,+ 2.1500001));+#15514 = CARTESIAN_POINT('',(-0.521491902514,-1.338691108905E-02,+ 2.1500001));+#15515 = CARTESIAN_POINT('',(-0.537747437407,7.649663479457E-03,+ 2.1500001));+#15516 = VECTOR('',#15517,1.);+#15517 = DIRECTION('',(0.,0.,1.));+#15518 = DEFINITIONAL_REPRESENTATION('',(#15519),#15523);+#15519 = LINE('',#15520,#15521);+#15520 = CARTESIAN_POINT('',(0.,-0.1));+#15521 = VECTOR('',#15522,1.);+#15522 = DIRECTION('',(1.,0.));+#15523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15524 = ORIENTED_EDGE('',*,*,#15525,.T.);+#15525 = EDGE_CURVE('',#15496,#15314,#15526,.T.);+#15526 = SURFACE_CURVE('',#15527,(#15531,#15538),.PCURVE_S1.);+#15527 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15528,#15529,#15530),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15528 = CARTESIAN_POINT('',(-0.537747437407,7.649663479457E-03,+ 2.0500001));+#15529 = CARTESIAN_POINT('',(-0.554002972301,2.868623804797E-02,+ 2.0500001));+#15530 = CARTESIAN_POINT('',(-0.586035938122,2.868623804797E-02,+ 2.0500001));+#15531 = PCURVE('',#14908,#15532);+#15532 = DEFINITIONAL_REPRESENTATION('',(#15533),#15537);+#15533 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15534,#15535,#15536),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15534 = CARTESIAN_POINT('',(0.19913030245,0.177137519946));+#15535 = CARTESIAN_POINT('',(0.182874767556,0.198174094515));+#15536 = CARTESIAN_POINT('',(0.150841801736,0.198174094515));+#15537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15538 = PCURVE('',#15539,#15546);+#15539 = SURFACE_OF_LINEAR_EXTRUSION('',#15540,#15544);+#15540 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15541,#15542,#15543),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15541 = CARTESIAN_POINT('',(-0.537747437407,7.649663479457E-03,+ 2.1500001));+#15542 = CARTESIAN_POINT('',(-0.554002972301,2.868623804797E-02,+ 2.1500001));+#15543 = CARTESIAN_POINT('',(-0.586035938122,2.868623804797E-02,+ 2.1500001));+#15544 = VECTOR('',#15545,1.);+#15545 = DIRECTION('',(0.,0.,1.));+#15546 = DEFINITIONAL_REPRESENTATION('',(#15547),#15551);+#15547 = LINE('',#15548,#15549);+#15548 = CARTESIAN_POINT('',(0.,-0.1));+#15549 = VECTOR('',#15550,1.);+#15550 = DIRECTION('',(1.,0.));+#15551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15552 = ADVANCED_FACE('',(#15553),#15539,.T.);+#15553 = FACE_BOUND('',#15554,.T.);+#15554 = EDGE_LOOP('',(#15555,#15600,#15621,#15622));+#15555 = ORIENTED_EDGE('',*,*,#15556,.T.);+#15556 = EDGE_CURVE('',#15557,#15559,#15561,.T.);+#15557 = VERTEX_POINT('',#15558);+#15558 = CARTESIAN_POINT('',(-0.586035938122,2.868623804797E-02,2.1));+#15559 = VERTEX_POINT('',#15560);+#15560 = CARTESIAN_POINT('',(-0.537747437407,7.649663479457E-03,2.1));+#15561 = SURFACE_CURVE('',#15562,(#15571,#15583),.PCURVE_S1.);+#15562 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15563,#15564,#15565,#15566,+ #15567,#15568,#15569,#15570),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.730041910495,1.),.UNSPECIFIED.);+#15563 = CARTESIAN_POINT('',(-0.586035938122,2.868623804796E-02,2.1));+#15564 = CARTESIAN_POINT('',(-0.574349639112,2.868623804796E-02,2.1));+#15565 = CARTESIAN_POINT('',(-0.56405754014,2.681967290395E-02,2.1));+#15566 = CARTESIAN_POINT('',(-0.555165577999,2.30824208082E-02,2.1));+#15567 = CARTESIAN_POINT('',(-0.54490592451,1.540262425516E-02,2.1));+#15568 = CARTESIAN_POINT('',(-0.542327955932,1.307378923317E-02,2.1));+#15569 = CARTESIAN_POINT('',(-0.539941788277,1.04894116637E-02,2.1));+#15570 = CARTESIAN_POINT('',(-0.537747437407,7.649663479456E-03,2.1));+#15571 = PCURVE('',#15539,#15572);+#15572 = DEFINITIONAL_REPRESENTATION('',(#15573),#15582);+#15573 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15574,#15575,#15576,#15577,+ #15578,#15579,#15580,#15581),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.730041910495,1.),.UNSPECIFIED.);+#15574 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15575 = CARTESIAN_POINT('',(0.817589493973,-5.00001E-02));+#15576 = CARTESIAN_POINT('',(0.635089645287,-5.00001E-02));+#15577 = CARTESIAN_POINT('',(0.45254486817,-5.00001E-02));+#15578 = CARTESIAN_POINT('',(0.202497760537,-5.00001E-02));+#15579 = CARTESIAN_POINT('',(0.13499550569,-5.00001E-02));+#15580 = CARTESIAN_POINT('',(6.749549873237E-02,-5.00001E-02));+#15581 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15583 = PCURVE('',#15584,#15589);+#15584 = PLANE('',#15585);+#15585 = AXIS2_PLACEMENT_3D('',#15586,#15587,#15588);+#15586 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#15587 = DIRECTION('',(0.,0.,1.));+#15588 = DIRECTION('',(0.51688870171,-0.856052609391,0.));+#15589 = DEFINITIONAL_REPRESENTATION('',(#15590),#15599);+#15590 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15591,#15592,#15593,#15594,+ #15595,#15596,#15597,#15598),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.730041910495,1.),.UNSPECIFIED.);+#15591 = CARTESIAN_POINT('',(4.173869266811,-0.486850001683));+#15592 = CARTESIAN_POINT('',(4.179909782734,-0.476845914921));+#15593 = CARTESIAN_POINT('',(4.186827530372,-0.469000143174));+#15594 = CARTESIAN_POINT('',(4.194622969547,-0.463319899165));+#15595 = CARTESIAN_POINT('',(4.206500378398,-0.458506696093));+#15596 = CARTESIAN_POINT('',(4.209826506527,-0.457503567876));+#15597 = CARTESIAN_POINT('',(4.21327225279,-0.456796718396));+#15598 = CARTESIAN_POINT('',(4.216837461805,-0.45638607236));+#15599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15600 = ORIENTED_EDGE('',*,*,#15601,.T.);+#15601 = EDGE_CURVE('',#15559,#15496,#15602,.T.);+#15602 = SURFACE_CURVE('',#15603,(#15607,#15614),.PCURVE_S1.);+#15603 = LINE('',#15604,#15605);+#15604 = CARTESIAN_POINT('',(-0.537747437407,7.649663479457E-03,+ 2.1500001));+#15605 = VECTOR('',#15606,1.);+#15606 = DIRECTION('',(-0.,-0.,-1.));+#15607 = PCURVE('',#15539,#15608);+#15608 = DEFINITIONAL_REPRESENTATION('',(#15609),#15613);+#15609 = LINE('',#15610,#15611);+#15610 = CARTESIAN_POINT('',(0.,0.));+#15611 = VECTOR('',#15612,1.);+#15612 = DIRECTION('',(0.,-1.));+#15613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15614 = PCURVE('',#15511,#15615);+#15615 = DEFINITIONAL_REPRESENTATION('',(#15616),#15620);+#15616 = LINE('',#15617,#15618);+#15617 = CARTESIAN_POINT('',(1.,0.));+#15618 = VECTOR('',#15619,1.);+#15619 = DIRECTION('',(0.,-1.));+#15620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15621 = ORIENTED_EDGE('',*,*,#15525,.T.);+#15622 = ORIENTED_EDGE('',*,*,#15623,.F.);+#15623 = EDGE_CURVE('',#15557,#15314,#15624,.T.);+#15624 = SURFACE_CURVE('',#15625,(#15629,#15636),.PCURVE_S1.);+#15625 = LINE('',#15626,#15627);+#15626 = CARTESIAN_POINT('',(-0.586035938122,2.868623804797E-02,+ 2.1500001));+#15627 = VECTOR('',#15628,1.);+#15628 = DIRECTION('',(-0.,-0.,-1.));+#15629 = PCURVE('',#15539,#15630);+#15630 = DEFINITIONAL_REPRESENTATION('',(#15631),#15635);+#15631 = LINE('',#15632,#15633);+#15632 = CARTESIAN_POINT('',(1.,0.));+#15633 = VECTOR('',#15634,1.);+#15634 = DIRECTION('',(0.,-1.));+#15635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15636 = PCURVE('',#15331,#15637);+#15637 = DEFINITIONAL_REPRESENTATION('',(#15638),#15642);+#15638 = LINE('',#15639,#15640);+#15639 = CARTESIAN_POINT('',(0.,0.));+#15640 = VECTOR('',#15641,1.);+#15641 = DIRECTION('',(0.,-1.));+#15642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15643 = ADVANCED_FACE('',(#15644),#15584,.T.);+#15644 = FACE_BOUND('',#15645,.T.);+#15645 = EDGE_LOOP('',(#15646,#15684,#15713,#15742,#15780,#15818,#15847,+ #15874));+#15646 = ORIENTED_EDGE('',*,*,#15647,.F.);+#15647 = EDGE_CURVE('',#15648,#15557,#15650,.T.);+#15648 = VERTEX_POINT('',#15649);+#15649 = CARTESIAN_POINT('',(-0.634563490819,6.454403560792E-03,2.1));+#15650 = SURFACE_CURVE('',#15651,(#15660,#15672),.PCURVE_S1.);+#15651 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15652,#15653,#15654,#15655,+ #15656,#15657,#15658,#15659),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.389977506284,1.),.UNSPECIFIED.);+#15652 = CARTESIAN_POINT('',(-0.634563490819,6.454403560791E-03,2.1));+#15653 = CARTESIAN_POINT('',(-0.631114439935,1.078902156463E-02,2.1));+#15654 = CARTESIAN_POINT('',(-0.627331713746,1.45608037778E-02,2.1));+#15655 = CARTESIAN_POINT('',(-0.623215341042,1.776911427986E-02,2.1));+#15656 = CARTESIAN_POINT('',(-0.611805144243,2.455068017229E-02,2.1));+#15657 = CARTESIAN_POINT('',(-0.604029005988,2.730839846896E-02,2.1));+#15658 = CARTESIAN_POINT('',(-0.595438353574,2.868623804797E-02,2.1));+#15659 = CARTESIAN_POINT('',(-0.586035938122,2.868623804796E-02,2.1));+#15660 = PCURVE('',#15584,#15661);+#15661 = DEFINITIONAL_REPRESENTATION('',(#15662),#15671);+#15662 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15663,#15664,#15665,#15666,+ #15667,#15668,#15669,#15670),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.389977506284,1.),.UNSPECIFIED.);+#15663 = CARTESIAN_POINT('',(4.167817543025,-0.539883523862));+#15664 = CARTESIAN_POINT('',(4.165889657406,-0.534690439779));+#15665 = CARTESIAN_POINT('',(4.164616061829,-0.529502635543));+#15666 = CARTESIAN_POINT('',(4.163997285794,-0.5243204645));+#15667 = CARTESIAN_POINT('',(4.164089710426,-0.511047420966));+#15668 = CARTESIAN_POINT('',(4.165748356489,-0.502965204092));+#15669 = CARTESIAN_POINT('',(4.169009264495,-0.494898963966));+#15670 = CARTESIAN_POINT('',(4.173869266811,-0.486850001683));+#15671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15672 = PCURVE('',#15331,#15673);+#15673 = DEFINITIONAL_REPRESENTATION('',(#15674),#15683);+#15674 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15675,#15676,#15677,#15678,+ #15679,#15680,#15681,#15682),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.389977506284,1.),.UNSPECIFIED.);+#15675 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15676 = CARTESIAN_POINT('',(0.902513262989,-5.00001E-02));+#15677 = CARTESIAN_POINT('',(0.805013304695,-5.00001E-02));+#15678 = CARTESIAN_POINT('',(0.707506689683,-5.00001E-02));+#15679 = CARTESIAN_POINT('',(0.45747511578,-5.00001E-02));+#15680 = CARTESIAN_POINT('',(0.304950038934,-5.00001E-02));+#15681 = CARTESIAN_POINT('',(0.152449982542,-5.00001E-02));+#15682 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15684 = ORIENTED_EDGE('',*,*,#15685,.F.);+#15685 = EDGE_CURVE('',#15686,#15648,#15688,.T.);+#15686 = VERTEX_POINT('',#15687);+#15687 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,2.1));+#15688 = SURFACE_CURVE('',#15689,(#15695,#15704),.PCURVE_S1.);+#15689 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15690,#15691,#15692,#15693,+ #15694),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15690 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,2.1));+#15691 = CARTESIAN_POINT('',(-0.652253337616,-3.539782632855E-02,2.1));+#15692 = CARTESIAN_POINT('',(-0.649310488336,-1.861998177978E-02,2.1));+#15693 = CARTESIAN_POINT('',(-0.643413079827,-4.667377219141E-03,2.1));+#15694 = CARTESIAN_POINT('',(-0.634563490819,6.454403560791E-03,2.1));+#15695 = PCURVE('',#15584,#15696);+#15696 = DEFINITIONAL_REPRESENTATION('',(#15697),#15703);+#15697 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15698,#15699,#15700,#15701,+ #15702),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15698 = CARTESIAN_POINT('',(4.211266617216,-0.586782723636));+#15699 = CARTESIAN_POINT('',(4.194501571686,-0.576659908143));+#15700 = CARTESIAN_POINT('',(4.181659979624,-0.565468396052));+#15701 = CARTESIAN_POINT('',(4.17276411991,-0.553207960452));+#15702 = CARTESIAN_POINT('',(4.167817543025,-0.539883523862));+#15703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15704 = PCURVE('',#15361,#15705);+#15705 = DEFINITIONAL_REPRESENTATION('',(#15706),#15712);+#15706 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15707,#15708,#15709,#15710,+ #15711),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15707 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15708 = CARTESIAN_POINT('',(0.750231258202,-5.00001E-02));+#15709 = CARTESIAN_POINT('',(0.50024239899,-5.00001E-02));+#15710 = CARTESIAN_POINT('',(0.250131872526,-5.00001E-02));+#15711 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15713 = ORIENTED_EDGE('',*,*,#15714,.F.);+#15714 = EDGE_CURVE('',#15715,#15686,#15717,.T.);+#15715 = VERTEX_POINT('',#15716);+#15716 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.1));+#15717 = SURFACE_CURVE('',#15718,(#15724,#15733),.PCURVE_S1.);+#15718 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15719,#15720,#15721,#15722,+ #15723),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15719 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.1));+#15720 = CARTESIAN_POINT('',(-0.643413079829,-0.105296535296,2.1));+#15721 = CARTESIAN_POINT('',(-0.649310488337,-9.134393074276E-02,2.1));+#15722 = CARTESIAN_POINT('',(-0.652253337616,-7.456608618371E-02,2.1));+#15723 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,2.1));+#15724 = PCURVE('',#15584,#15725);+#15725 = DEFINITIONAL_REPRESENTATION('',(#15726),#15732);+#15726 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15727,#15728,#15729,#15730,+ #15731),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15727 = CARTESIAN_POINT('',(4.273003055294,-0.603395044391));+#15728 = CARTESIAN_POINT('',(4.258907973261,-0.605222035326));+#15729 = CARTESIAN_POINT('',(4.243915505898,-0.603058583615));+#15730 = CARTESIAN_POINT('',(4.228031662741,-0.596905539127));+#15731 = CARTESIAN_POINT('',(4.211266617216,-0.586782723636));+#15732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15733 = PCURVE('',#15391,#15734);+#15734 = DEFINITIONAL_REPRESENTATION('',(#15735),#15741);+#15735 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15736,#15737,#15738,#15739,+ #15740),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15736 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15737 = CARTESIAN_POINT('',(0.749868127431,-5.00001E-02));+#15738 = CARTESIAN_POINT('',(0.499757601067,-5.00001E-02));+#15739 = CARTESIAN_POINT('',(0.249768741735,-5.00001E-02));+#15740 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15742 = ORIENTED_EDGE('',*,*,#15743,.F.);+#15743 = EDGE_CURVE('',#15744,#15715,#15746,.T.);+#15744 = VERTEX_POINT('',#15745);+#15745 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.1));+#15746 = SURFACE_CURVE('',#15747,(#15756,#15768),.PCURVE_S1.);+#15747 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15748,#15749,#15750,#15751,+ #15752,#15753,#15754,#15755),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.608022746301,1.),.UNSPECIFIED.);+#15748 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.1));+#15749 = CARTESIAN_POINT('',(-0.595407531015,-0.138650150565,2.1));+#15750 = CARTESIAN_POINT('',(-0.603972674306,-0.137281329716,2.1));+#15751 = CARTESIAN_POINT('',(-0.611728643862,-0.134541668879,2.1));+#15752 = CARTESIAN_POINT('',(-0.623151990258,-0.127782337583,2.1));+#15753 = CARTESIAN_POINT('',(-0.627292910442,-0.124563383788,2.1));+#15754 = CARTESIAN_POINT('',(-0.631096753709,-0.120775161366,2.1));+#15755 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.1));+#15756 = PCURVE('',#15584,#15757);+#15757 = DEFINITIONAL_REPRESENTATION('',(#15758),#15767);+#15758 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15759,#15760,#15761,#15762,+ #15763,#15764,#15765,#15766),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.608022746301,1.),.UNSPECIFIED.);+#15759 = CARTESIAN_POINT('',(4.31711801893,-0.573344290342));+#15760 = CARTESIAN_POINT('',(4.312273948446,-0.581366866893));+#15761 = CARTESIAN_POINT('',(4.306674939991,-0.587991552124));+#15762 = CARTESIAN_POINT('',(4.300320673148,-0.593214970369));+#15763 = CARTESIAN_POINT('',(4.288629731267,-0.599500133881));+#15764 = CARTESIAN_POINT('',(4.283733742613,-0.601381138561));+#15765 = CARTESIAN_POINT('',(4.278524661316,-0.602679339146));+#15766 = CARTESIAN_POINT('',(4.273003055294,-0.603395044391));+#15767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15768 = PCURVE('',#15421,#15769);+#15769 = DEFINITIONAL_REPRESENTATION('',(#15770),#15779);+#15770 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15771,#15772,#15773,#15774,+ #15775,#15776,#15777,#15778),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.608022746301,1.),.UNSPECIFIED.);+#15771 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15772 = CARTESIAN_POINT('',(0.848049771867,-5.00001E-02));+#15773 = CARTESIAN_POINT('',(0.696049797763,-5.00001E-02));+#15774 = CARTESIAN_POINT('',(0.54402488524,-5.00001E-02));+#15775 = CARTESIAN_POINT('',(0.29399330967,-5.00001E-02));+#15776 = CARTESIAN_POINT('',(0.195986626628,-5.00001E-02));+#15777 = CARTESIAN_POINT('',(9.798663467211E-02,-5.00001E-02));+#15778 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15780 = ORIENTED_EDGE('',*,*,#15781,.F.);+#15781 = EDGE_CURVE('',#15782,#15744,#15784,.T.);+#15782 = VERTEX_POINT('',#15783);+#15783 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.1));+#15784 = SURFACE_CURVE('',#15785,(#15794,#15806),.PCURVE_S1.);+#15785 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15786,#15787,#15788,#15789,+ #15790,#15791,#15792,#15793),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.275958114248,1.),.UNSPECIFIED.);+#15786 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.1));+#15787 = CARTESIAN_POINT('',(-0.539990544361,-0.120413387732,2.1));+#15788 = CARTESIAN_POINT('',(-0.542434090864,-0.123064369894,2.1));+#15789 = CARTESIAN_POINT('',(-0.545078061072,-0.125446808823,2.1));+#15790 = CARTESIAN_POINT('',(-0.555385035314,-0.133106745117,2.1));+#15791 = CARTESIAN_POINT('',(-0.564226741999,-0.136803696689,2.1));+#15792 = CARTESIAN_POINT('',(-0.574445646906,-0.138650150565,2.1));+#15793 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.1));+#15794 = PCURVE('',#15584,#15795);+#15795 = DEFINITIONAL_REPRESENTATION('',(#15796),#15805);+#15796 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15797,#15798,#15799,#15800,+ #15801,#15802,#15803,#15804),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.275958114248,1.),.UNSPECIFIED.);+#15797 = CARTESIAN_POINT('',(4.323967064282,-0.52107144395));+#15798 = CARTESIAN_POINT('',(4.32530673432,-0.524500634199));+#15799 = CARTESIAN_POINT('',(4.326313072938,-0.527962701287));+#15800 = CARTESIAN_POINT('',(4.326985927672,-0.531457534647));+#15801 = CARTESIAN_POINT('',(4.32821567759,-0.544240181368));+#15802 = CARTESIAN_POINT('',(4.326810284341,-0.553720059945));+#15803 = CARTESIAN_POINT('',(4.323108909508,-0.563422391303));+#15804 = CARTESIAN_POINT('',(4.31711801893,-0.573344290342));+#15805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15806 = PCURVE('',#15451,#15807);+#15807 = DEFINITIONAL_REPRESENTATION('',(#15808),#15817);+#15808 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15809,#15810,#15811,#15812,+ #15813,#15814,#15815,#15816),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.275958114248,1.),.UNSPECIFIED.);+#15809 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15810 = CARTESIAN_POINT('',(0.931004824861,-5.00001E-02));+#15811 = CARTESIAN_POINT('',(0.862004811343,-5.00001E-02));+#15812 = CARTESIAN_POINT('',(0.793002391327,-5.00001E-02));+#15813 = CARTESIAN_POINT('',(0.542955780033,-5.00001E-02));+#15814 = CARTESIAN_POINT('',(0.361911736534,-5.00001E-02));+#15815 = CARTESIAN_POINT('',(0.180911928046,-5.00001E-02));+#15816 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15818 = ORIENTED_EDGE('',*,*,#15819,.F.);+#15819 = EDGE_CURVE('',#15820,#15782,#15822,.T.);+#15820 = VERTEX_POINT('',#15821);+#15821 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,2.1));+#15822 = SURFACE_CURVE('',#15823,(#15829,#15838),.PCURVE_S1.);+#15823 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15824,#15825,#15826,#15827,+ #15828),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15824 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,2.1));+#15825 = CARTESIAN_POINT('',(-0.521491902514,-7.563482380991E-02,2.1));+#15826 = CARTESIAN_POINT('',(-0.524194568387,-9.295205982269E-02,2.1));+#15827 = CARTESIAN_POINT('',(-0.529613397962,-0.106907836904,2.1));+#15828 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.1));+#15829 = PCURVE('',#15584,#15830);+#15830 = DEFINITIONAL_REPRESENTATION('',(#15831),#15837);+#15831 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15832,#15833,#15834,#15835,+ #15836),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15832 = CARTESIAN_POINT('',(4.278855725639,-0.474844055909));+#15833 = CARTESIAN_POINT('',(4.296535666798,-0.485519289805));+#15834 = CARTESIAN_POINT('',(4.30996315442,-0.496783997617));+#15835 = CARTESIAN_POINT('',(4.319109102022,-0.508636384312));+#15836 = CARTESIAN_POINT('',(4.323967064282,-0.52107144395));+#15837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15838 = PCURVE('',#15481,#15839);+#15839 = DEFINITIONAL_REPRESENTATION('',(#15840),#15846);+#15840 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15841,#15842,#15843,#15844,+ #15845),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15841 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15842 = CARTESIAN_POINT('',(0.750303813784,-5.00001E-02));+#15843 = CARTESIAN_POINT('',(0.500331630576,-5.00001E-02));+#15844 = CARTESIAN_POINT('',(0.250192918848,-5.00001E-02));+#15845 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15847 = ORIENTED_EDGE('',*,*,#15848,.F.);+#15848 = EDGE_CURVE('',#15559,#15820,#15849,.T.);+#15849 = SURFACE_CURVE('',#15850,(#15856,#15865),.PCURVE_S1.);+#15850 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15851,#15852,#15853,#15854,+ #15855),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15851 = CARTESIAN_POINT('',(-0.537747437407,7.649663479456E-03,2.1));+#15852 = CARTESIAN_POINT('',(-0.529613235946,-2.876950176239E-03,2.1));+#15853 = CARTESIAN_POINT('',(-0.524194408349,-1.683306163198E-02,2.1));+#15854 = CARTESIAN_POINT('',(-0.521491902514,-3.421032133869E-02,2.1));+#15855 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,2.1));+#15856 = PCURVE('',#15584,#15857);+#15857 = DEFINITIONAL_REPRESENTATION('',(#15858),#15864);+#15858 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15859,#15860,#15861,#15862,+ #15863),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15859 = CARTESIAN_POINT('',(4.216837461805,-0.45638607236));+#15860 = CARTESIAN_POINT('',(4.230053273726,-0.45486385564));+#15861 = CARTESIAN_POINT('',(4.244801370116,-0.457438810466));+#15862 = CARTESIAN_POINT('',(4.261074113365,-0.464107432503));+#15863 = CARTESIAN_POINT('',(4.278855725639,-0.474844055909));+#15864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15865 = PCURVE('',#15511,#15866);+#15866 = DEFINITIONAL_REPRESENTATION('',(#15867),#15873);+#15867 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15868,#15869,#15870,#15871,+ #15872),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15868 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15869 = CARTESIAN_POINT('',(0.749802097737,-5.00001E-02));+#15870 = CARTESIAN_POINT('',(0.499660109562,-5.00001E-02));+#15871 = CARTESIAN_POINT('',(0.249688813118,-5.00001E-02));+#15872 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15874 = ORIENTED_EDGE('',*,*,#15556,.F.);+#15875 = ADVANCED_FACE('',(#15876),#15511,.T.);+#15876 = FACE_BOUND('',#15877,.T.);+#15877 = EDGE_LOOP('',(#15878,#15879,#15900,#15901));+#15878 = ORIENTED_EDGE('',*,*,#15848,.T.);+#15879 = ORIENTED_EDGE('',*,*,#15880,.T.);+#15880 = EDGE_CURVE('',#15820,#15466,#15881,.T.);+#15881 = SURFACE_CURVE('',#15882,(#15886,#15893),.PCURVE_S1.);+#15882 = LINE('',#15883,#15884);+#15883 = CARTESIAN_POINT('',(-0.521491902514,-5.49819562586E-02,+ 2.1500001));+#15884 = VECTOR('',#15885,1.);+#15885 = DIRECTION('',(-0.,-0.,-1.));+#15886 = PCURVE('',#15511,#15887);+#15887 = DEFINITIONAL_REPRESENTATION('',(#15888),#15892);+#15888 = LINE('',#15889,#15890);+#15889 = CARTESIAN_POINT('',(0.,0.));+#15890 = VECTOR('',#15891,1.);+#15891 = DIRECTION('',(0.,-1.));+#15892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15893 = PCURVE('',#15481,#15894);+#15894 = DEFINITIONAL_REPRESENTATION('',(#15895),#15899);+#15895 = LINE('',#15896,#15897);+#15896 = CARTESIAN_POINT('',(1.,0.));+#15897 = VECTOR('',#15898,1.);+#15898 = DIRECTION('',(0.,-1.));+#15899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15900 = ORIENTED_EDGE('',*,*,#15495,.T.);+#15901 = ORIENTED_EDGE('',*,*,#15601,.F.);+#15902 = ADVANCED_FACE('',(#15903),#15481,.T.);+#15903 = FACE_BOUND('',#15904,.T.);+#15904 = EDGE_LOOP('',(#15905,#15906,#15927,#15928));+#15905 = ORIENTED_EDGE('',*,*,#15819,.T.);+#15906 = ORIENTED_EDGE('',*,*,#15907,.T.);+#15907 = EDGE_CURVE('',#15782,#15436,#15908,.T.);+#15908 = SURFACE_CURVE('',#15909,(#15913,#15920),.PCURVE_S1.);+#15909 = LINE('',#15910,#15911);+#15910 = CARTESIAN_POINT('',(-0.537747437407,-0.117494050005,2.1500001)+ );+#15911 = VECTOR('',#15912,1.);+#15912 = DIRECTION('',(-0.,-0.,-1.));+#15913 = PCURVE('',#15481,#15914);+#15914 = DEFINITIONAL_REPRESENTATION('',(#15915),#15919);+#15915 = LINE('',#15916,#15917);+#15916 = CARTESIAN_POINT('',(0.,0.));+#15917 = VECTOR('',#15918,1.);+#15918 = DIRECTION('',(0.,-1.));+#15919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15920 = PCURVE('',#15451,#15921);+#15921 = DEFINITIONAL_REPRESENTATION('',(#15922),#15926);+#15922 = LINE('',#15923,#15924);+#15923 = CARTESIAN_POINT('',(1.,0.));+#15924 = VECTOR('',#15925,1.);+#15925 = DIRECTION('',(0.,-1.));+#15926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15927 = ORIENTED_EDGE('',*,*,#15465,.T.);+#15928 = ORIENTED_EDGE('',*,*,#15880,.F.);+#15929 = ADVANCED_FACE('',(#15930),#15451,.T.);+#15930 = FACE_BOUND('',#15931,.T.);+#15931 = EDGE_LOOP('',(#15932,#15933,#15954,#15955));+#15932 = ORIENTED_EDGE('',*,*,#15781,.T.);+#15933 = ORIENTED_EDGE('',*,*,#15934,.T.);+#15934 = EDGE_CURVE('',#15744,#15406,#15935,.T.);+#15935 = SURFACE_CURVE('',#15936,(#15940,#15947),.PCURVE_S1.);+#15936 = LINE('',#15937,#15938);+#15937 = CARTESIAN_POINT('',(-0.586035938122,-0.138650150565,2.1500001)+ );+#15938 = VECTOR('',#15939,1.);+#15939 = DIRECTION('',(-0.,-0.,-1.));+#15940 = PCURVE('',#15451,#15941);+#15941 = DEFINITIONAL_REPRESENTATION('',(#15942),#15946);+#15942 = LINE('',#15943,#15944);+#15943 = CARTESIAN_POINT('',(0.,0.));+#15944 = VECTOR('',#15945,1.);+#15945 = DIRECTION('',(0.,-1.));+#15946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15947 = PCURVE('',#15421,#15948);+#15948 = DEFINITIONAL_REPRESENTATION('',(#15949),#15953);+#15949 = LINE('',#15950,#15951);+#15950 = CARTESIAN_POINT('',(1.,0.));+#15951 = VECTOR('',#15952,1.);+#15952 = DIRECTION('',(0.,-1.));+#15953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15954 = ORIENTED_EDGE('',*,*,#15435,.T.);+#15955 = ORIENTED_EDGE('',*,*,#15907,.F.);+#15956 = ADVANCED_FACE('',(#15957),#15421,.T.);+#15957 = FACE_BOUND('',#15958,.T.);+#15958 = EDGE_LOOP('',(#15959,#15960,#15981,#15982));+#15959 = ORIENTED_EDGE('',*,*,#15743,.T.);+#15960 = ORIENTED_EDGE('',*,*,#15961,.T.);+#15961 = EDGE_CURVE('',#15715,#15376,#15962,.T.);+#15962 = SURFACE_CURVE('',#15963,(#15967,#15974),.PCURVE_S1.);+#15963 = LINE('',#15964,#15965);+#15964 = CARTESIAN_POINT('',(-0.634563490819,-0.116418316078,2.1500001)+ );+#15965 = VECTOR('',#15966,1.);+#15966 = DIRECTION('',(-0.,-0.,-1.));+#15967 = PCURVE('',#15421,#15968);+#15968 = DEFINITIONAL_REPRESENTATION('',(#15969),#15973);+#15969 = LINE('',#15970,#15971);+#15970 = CARTESIAN_POINT('',(0.,0.));+#15971 = VECTOR('',#15972,1.);+#15972 = DIRECTION('',(0.,-1.));+#15973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15974 = PCURVE('',#15391,#15975);+#15975 = DEFINITIONAL_REPRESENTATION('',(#15976),#15980);+#15976 = LINE('',#15977,#15978);+#15977 = CARTESIAN_POINT('',(1.,0.));+#15978 = VECTOR('',#15979,1.);+#15979 = DIRECTION('',(0.,-1.));+#15980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15981 = ORIENTED_EDGE('',*,*,#15405,.T.);+#15982 = ORIENTED_EDGE('',*,*,#15934,.F.);+#15983 = ADVANCED_FACE('',(#15984),#15391,.T.);+#15984 = FACE_BOUND('',#15985,.T.);+#15985 = EDGE_LOOP('',(#15986,#15987,#16008,#16009));+#15986 = ORIENTED_EDGE('',*,*,#15714,.T.);+#15987 = ORIENTED_EDGE('',*,*,#15988,.T.);+#15988 = EDGE_CURVE('',#15686,#15346,#15989,.T.);+#15989 = SURFACE_CURVE('',#15990,(#15994,#16001),.PCURVE_S1.);+#15990 = LINE('',#15991,#15992);+#15991 = CARTESIAN_POINT('',(-0.652253337616,-5.49819562586E-02,+ 2.1500001));+#15992 = VECTOR('',#15993,1.);+#15993 = DIRECTION('',(-0.,-0.,-1.));+#15994 = PCURVE('',#15391,#15995);+#15995 = DEFINITIONAL_REPRESENTATION('',(#15996),#16000);+#15996 = LINE('',#15997,#15998);+#15997 = CARTESIAN_POINT('',(0.,0.));+#15998 = VECTOR('',#15999,1.);+#15999 = DIRECTION('',(0.,-1.));+#16000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16001 = PCURVE('',#15361,#16002);+#16002 = DEFINITIONAL_REPRESENTATION('',(#16003),#16007);+#16003 = LINE('',#16004,#16005);+#16004 = CARTESIAN_POINT('',(1.,0.));+#16005 = VECTOR('',#16006,1.);+#16006 = DIRECTION('',(0.,-1.));+#16007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16008 = ORIENTED_EDGE('',*,*,#15375,.T.);+#16009 = ORIENTED_EDGE('',*,*,#15961,.F.);+#16010 = ADVANCED_FACE('',(#16011),#15361,.T.);+#16011 = FACE_BOUND('',#16012,.T.);+#16012 = EDGE_LOOP('',(#16013,#16014,#16035,#16036));+#16013 = ORIENTED_EDGE('',*,*,#15685,.T.);+#16014 = ORIENTED_EDGE('',*,*,#16015,.T.);+#16015 = EDGE_CURVE('',#15648,#15316,#16016,.T.);+#16016 = SURFACE_CURVE('',#16017,(#16021,#16028),.PCURVE_S1.);+#16017 = LINE('',#16018,#16019);+#16018 = CARTESIAN_POINT('',(-0.634563490819,6.454403560792E-03,+ 2.1500001));+#16019 = VECTOR('',#16020,1.);+#16020 = DIRECTION('',(-0.,-0.,-1.));+#16021 = PCURVE('',#15361,#16022);+#16022 = DEFINITIONAL_REPRESENTATION('',(#16023),#16027);+#16023 = LINE('',#16024,#16025);+#16024 = CARTESIAN_POINT('',(0.,0.));+#16025 = VECTOR('',#16026,1.);+#16026 = DIRECTION('',(0.,-1.));+#16027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16028 = PCURVE('',#15331,#16029);+#16029 = DEFINITIONAL_REPRESENTATION('',(#16030),#16034);+#16030 = LINE('',#16031,#16032);+#16031 = CARTESIAN_POINT('',(1.,0.));+#16032 = VECTOR('',#16033,1.);+#16033 = DIRECTION('',(0.,-1.));+#16034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16035 = ORIENTED_EDGE('',*,*,#15345,.T.);+#16036 = ORIENTED_EDGE('',*,*,#15988,.F.);+#16037 = ADVANCED_FACE('',(#16038),#15331,.T.);+#16038 = FACE_BOUND('',#16039,.T.);+#16039 = EDGE_LOOP('',(#16040,#16041,#16042,#16043));+#16040 = ORIENTED_EDGE('',*,*,#15647,.T.);+#16041 = ORIENTED_EDGE('',*,*,#15623,.T.);+#16042 = ORIENTED_EDGE('',*,*,#15313,.T.);+#16043 = ORIENTED_EDGE('',*,*,#16015,.F.);+#16044 = ADVANCED_FACE('',(#16045),#6459,.T.);+#16045 = FACE_BOUND('',#16046,.T.);+#16046 = EDGE_LOOP('',(#16047,#16048,#16069,#16070));+#16047 = ORIENTED_EDGE('',*,*,#6433,.T.);+#16048 = ORIENTED_EDGE('',*,*,#16049,.T.);+#16049 = EDGE_CURVE('',#6398,#15246,#16050,.T.);+#16050 = SURFACE_CURVE('',#16051,(#16055,#16062),.PCURVE_S1.);+#16051 = LINE('',#16052,#16053);+#16052 = CARTESIAN_POINT('',(-0.670301762387,0.146419340036,2.1500001));+#16053 = VECTOR('',#16054,1.);+#16054 = DIRECTION('',(-0.,-0.,-1.));+#16055 = PCURVE('',#6459,#16056);+#16056 = DEFINITIONAL_REPRESENTATION('',(#16057),#16061);+#16057 = LINE('',#16058,#16059);+#16058 = CARTESIAN_POINT('',(0.,0.));+#16059 = VECTOR('',#16060,1.);+#16060 = DIRECTION('',(0.,-1.));+#16061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16062 = PCURVE('',#6417,#16063);+#16063 = DEFINITIONAL_REPRESENTATION('',(#16064),#16068);+#16064 = LINE('',#16065,#16066);+#16065 = CARTESIAN_POINT('',(1.,0.));+#16066 = VECTOR('',#16067,1.);+#16067 = DIRECTION('',(0.,-1.));+#16068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16069 = ORIENTED_EDGE('',*,*,#15268,.T.);+#16070 = ORIENTED_EDGE('',*,*,#14869,.F.);+#16071 = ADVANCED_FACE('',(#16072),#6417,.T.);+#16072 = FACE_BOUND('',#16073,.T.);+#16073 = EDGE_LOOP('',(#16074,#16075,#16096,#16097));+#16074 = ORIENTED_EDGE('',*,*,#6397,.T.);+#16075 = ORIENTED_EDGE('',*,*,#16076,.T.);+#16076 = EDGE_CURVE('',#6359,#15223,#16077,.T.);+#16077 = SURFACE_CURVE('',#16078,(#16082,#16089),.PCURVE_S1.);+#16078 = LINE('',#16079,#16080);+#16079 = CARTESIAN_POINT('',(-0.705083826021,8.60587141439E-03,2.1500001+ ));+#16080 = VECTOR('',#16081,1.);+#16081 = DIRECTION('',(-0.,-0.,-1.));+#16082 = PCURVE('',#6417,#16083);+#16083 = DEFINITIONAL_REPRESENTATION('',(#16084),#16088);+#16084 = LINE('',#16085,#16086);+#16085 = CARTESIAN_POINT('',(0.,0.));+#16086 = VECTOR('',#16087,1.);+#16087 = DIRECTION('',(0.,-1.));+#16088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16089 = PCURVE('',#6380,#16090);+#16090 = DEFINITIONAL_REPRESENTATION('',(#16091),#16095);+#16091 = LINE('',#16092,#16093);+#16092 = CARTESIAN_POINT('',(1.,0.));+#16093 = VECTOR('',#16094,1.);+#16094 = DIRECTION('',(0.,-1.));+#16095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16096 = ORIENTED_EDGE('',*,*,#15245,.T.);+#16097 = ORIENTED_EDGE('',*,*,#16049,.F.);+#16098 = ADVANCED_FACE('',(#16099),#6380,.T.);+#16099 = FACE_BOUND('',#16100,.T.);+#16100 = EDGE_LOOP('',(#16101,#16102,#16123,#16124));+#16101 = ORIENTED_EDGE('',*,*,#6358,.T.);+#16102 = ORIENTED_EDGE('',*,*,#16103,.T.);+#16103 = EDGE_CURVE('',#6314,#15200,#16104,.T.);+#16104 = SURFACE_CURVE('',#16105,(#16109,#16116),.PCURVE_S1.);+#16105 = LINE('',#16106,#16107);+#16106 = CARTESIAN_POINT('',(-0.676158535989,-0.131837169029,2.1500001)+ );+#16107 = VECTOR('',#16108,1.);+#16108 = DIRECTION('',(-0.,-0.,-1.));+#16109 = PCURVE('',#6380,#16110);+#16110 = DEFINITIONAL_REPRESENTATION('',(#16111),#16115);+#16111 = LINE('',#16112,#16113);+#16112 = CARTESIAN_POINT('',(0.,0.));+#16113 = VECTOR('',#16114,1.);+#16114 = DIRECTION('',(0.,-1.));+#16115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16116 = PCURVE('',#6339,#16117);+#16117 = DEFINITIONAL_REPRESENTATION('',(#16118),#16122);+#16118 = LINE('',#16119,#16120);+#16119 = CARTESIAN_POINT('',(1.,0.));+#16120 = VECTOR('',#16121,1.);+#16121 = DIRECTION('',(0.,-1.));+#16122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16123 = ORIENTED_EDGE('',*,*,#15222,.T.);+#16124 = ORIENTED_EDGE('',*,*,#16076,.F.);+#16125 = ADVANCED_FACE('',(#16126),#6339,.T.);+#16126 = FACE_BOUND('',#16127,.T.);+#16127 = EDGE_LOOP('',(#16128,#16129,#16150,#16151));+#16128 = ORIENTED_EDGE('',*,*,#6313,.T.);+#16129 = ORIENTED_EDGE('',*,*,#16130,.T.);+#16130 = EDGE_CURVE('',#6269,#15177,#16131,.T.);+#16131 = SURFACE_CURVE('',#16132,(#16136,#16143),.PCURVE_S1.);+#16132 = LINE('',#16133,#16134);+#16133 = CARTESIAN_POINT('',(-0.585079730187,-0.176420363995,2.1500001)+ );+#16134 = VECTOR('',#16135,1.);+#16135 = DIRECTION('',(-0.,-0.,-1.));+#16136 = PCURVE('',#6339,#16137);+#16137 = DEFINITIONAL_REPRESENTATION('',(#16138),#16142);+#16138 = LINE('',#16139,#16140);+#16139 = CARTESIAN_POINT('',(0.,0.));+#16140 = VECTOR('',#16141,1.);+#16141 = DIRECTION('',(0.,-1.));+#16142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16143 = PCURVE('',#6294,#16144);+#16144 = DEFINITIONAL_REPRESENTATION('',(#16145),#16149);+#16145 = LINE('',#16146,#16147);+#16146 = CARTESIAN_POINT('',(1.,0.));+#16147 = VECTOR('',#16148,1.);+#16148 = DIRECTION('',(0.,-1.));+#16149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16150 = ORIENTED_EDGE('',*,*,#15199,.T.);+#16151 = ORIENTED_EDGE('',*,*,#16103,.F.);+#16152 = ADVANCED_FACE('',(#16153),#6294,.T.);+#16153 = FACE_BOUND('',#16154,.T.);+#16154 = EDGE_LOOP('',(#16155,#16156,#16177,#16178));+#16155 = ORIENTED_EDGE('',*,*,#6268,.T.);+#16156 = ORIENTED_EDGE('',*,*,#16157,.T.);+#16157 = EDGE_CURVE('',#6233,#15154,#16158,.T.);+#16158 = SURFACE_CURVE('',#16159,(#16163,#16170),.PCURVE_S1.);+#16159 = LINE('',#16160,#16161);+#16160 = CARTESIAN_POINT('',(-0.503084899766,-0.144626450158,2.1500001)+ );+#16161 = VECTOR('',#16162,1.);+#16162 = DIRECTION('',(-0.,-0.,-1.));+#16163 = PCURVE('',#6294,#16164);+#16164 = DEFINITIONAL_REPRESENTATION('',(#16165),#16169);+#16165 = LINE('',#16166,#16167);+#16166 = CARTESIAN_POINT('',(0.,0.));+#16167 = VECTOR('',#16168,1.);+#16168 = DIRECTION('',(0.,-1.));+#16169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16170 = PCURVE('',#6252,#16171);+#16171 = DEFINITIONAL_REPRESENTATION('',(#16172),#16176);+#16172 = LINE('',#16173,#16174);+#16173 = CARTESIAN_POINT('',(1.,0.));+#16174 = VECTOR('',#16175,1.);+#16175 = DIRECTION('',(0.,-1.));+#16176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16177 = ORIENTED_EDGE('',*,*,#15176,.T.);+#16178 = ORIENTED_EDGE('',*,*,#16130,.F.);+#16179 = ADVANCED_FACE('',(#16180),#6252,.T.);+#16180 = FACE_BOUND('',#16181,.T.);+#16181 = EDGE_LOOP('',(#16182,#16183,#16204,#16205));+#16182 = ORIENTED_EDGE('',*,*,#6232,.T.);+#16183 = ORIENTED_EDGE('',*,*,#16184,.T.);+#16184 = EDGE_CURVE('',#6197,#15131,#16185,.T.);+#16185 = SURFACE_CURVE('',#16186,(#16190,#16197),.PCURVE_S1.);+#16186 = LINE('',#16187,#16188);+#16187 = CARTESIAN_POINT('',(-0.473920557751,-5.49819562586E-02,+ 2.1500001));+#16188 = VECTOR('',#16189,1.);+#16189 = DIRECTION('',(-0.,-0.,-1.));+#16190 = PCURVE('',#6252,#16191);+#16191 = DEFINITIONAL_REPRESENTATION('',(#16192),#16196);+#16192 = LINE('',#16193,#16194);+#16193 = CARTESIAN_POINT('',(0.,0.));+#16194 = VECTOR('',#16195,1.);+#16195 = DIRECTION('',(0.,-1.));+#16196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16197 = PCURVE('',#6216,#16198);+#16198 = DEFINITIONAL_REPRESENTATION('',(#16199),#16203);+#16199 = LINE('',#16200,#16201);+#16200 = CARTESIAN_POINT('',(1.,0.));+#16201 = VECTOR('',#16202,1.);+#16202 = DIRECTION('',(0.,-1.));+#16203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16204 = ORIENTED_EDGE('',*,*,#15153,.T.);+#16205 = ORIENTED_EDGE('',*,*,#16157,.F.);+#16206 = ADVANCED_FACE('',(#16207),#6216,.T.);+#16207 = FACE_BOUND('',#16208,.T.);+#16208 = EDGE_LOOP('',(#16209,#16210,#16231,#16232));+#16209 = ORIENTED_EDGE('',*,*,#6196,.T.);+#16210 = ORIENTED_EDGE('',*,*,#16211,.T.);+#16211 = EDGE_CURVE('',#6152,#15108,#16212,.T.);+#16212 = SURFACE_CURVE('',#16213,(#16217,#16224),.PCURVE_S1.);+#16213 = LINE('',#16214,#16215);+#16214 = CARTESIAN_POINT('',(-0.502248217823,3.478206363316E-02,+ 2.1500001));+#16215 = VECTOR('',#16216,1.);+#16216 = DIRECTION('',(-0.,-0.,-1.));+#16217 = PCURVE('',#6216,#16218);+#16218 = DEFINITIONAL_REPRESENTATION('',(#16219),#16223);+#16219 = LINE('',#16220,#16221);+#16220 = CARTESIAN_POINT('',(0.,0.));+#16221 = VECTOR('',#16222,1.);+#16222 = DIRECTION('',(0.,-1.));+#16223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16224 = PCURVE('',#6177,#16225);+#16225 = DEFINITIONAL_REPRESENTATION('',(#16226),#16230);+#16226 = LINE('',#16227,#16228);+#16227 = CARTESIAN_POINT('',(1.,0.));+#16228 = VECTOR('',#16229,1.);+#16229 = DIRECTION('',(0.,-1.));+#16230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16231 = ORIENTED_EDGE('',*,*,#15130,.T.);+#16232 = ORIENTED_EDGE('',*,*,#16184,.F.);+#16233 = ADVANCED_FACE('',(#16234),#6177,.T.);+#16234 = FACE_BOUND('',#16235,.T.);+#16235 = EDGE_LOOP('',(#16236,#16237,#16258,#16259));+#16236 = ORIENTED_EDGE('',*,*,#6151,.T.);+#16237 = ORIENTED_EDGE('',*,*,#16238,.T.);+#16238 = EDGE_CURVE('',#6116,#15085,#16239,.T.);+#16239 = SURFACE_CURVE('',#16240,(#16244,#16251),.PCURVE_S1.);+#16240 = LINE('',#16241,#16242);+#16241 = CARTESIAN_POINT('',(-0.582211106382,6.645645147779E-02,+ 2.1500001));+#16242 = VECTOR('',#16243,1.);+#16243 = DIRECTION('',(-0.,-0.,-1.));+#16244 = PCURVE('',#6177,#16245);+#16245 = DEFINITIONAL_REPRESENTATION('',(#16246),#16250);+#16246 = LINE('',#16247,#16248);+#16247 = CARTESIAN_POINT('',(0.,0.));+#16248 = VECTOR('',#16249,1.);+#16249 = DIRECTION('',(0.,-1.));+#16250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16251 = PCURVE('',#6135,#16252);+#16252 = DEFINITIONAL_REPRESENTATION('',(#16253),#16257);+#16253 = LINE('',#16254,#16255);+#16254 = CARTESIAN_POINT('',(1.,0.));+#16255 = VECTOR('',#16256,1.);+#16256 = DIRECTION('',(0.,-1.));+#16257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16258 = ORIENTED_EDGE('',*,*,#15107,.T.);+#16259 = ORIENTED_EDGE('',*,*,#16211,.F.);+#16260 = ADVANCED_FACE('',(#16261),#6135,.T.);+#16261 = FACE_BOUND('',#16262,.T.);+#16262 = EDGE_LOOP('',(#16263,#16264,#16285,#16286));+#16263 = ORIENTED_EDGE('',*,*,#6115,.T.);+#16264 = ORIENTED_EDGE('',*,*,#16265,.T.);+#16265 = EDGE_CURVE('',#6071,#15062,#16266,.T.);+#16266 = SURFACE_CURVE('',#16267,(#16271,#16278),.PCURVE_S1.);+#16267 = LINE('',#16268,#16269);+#16268 = CARTESIAN_POINT('',(-0.62882624321,5.366717034807E-02,2.1500001+ ));+#16269 = VECTOR('',#16270,1.);+#16270 = DIRECTION('',(-0.,-0.,-1.));+#16271 = PCURVE('',#6135,#16272);+#16272 = DEFINITIONAL_REPRESENTATION('',(#16273),#16277);+#16273 = LINE('',#16274,#16275);+#16274 = CARTESIAN_POINT('',(0.,0.));+#16275 = VECTOR('',#16276,1.);+#16276 = DIRECTION('',(0.,-1.));+#16277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16278 = PCURVE('',#6096,#16279);+#16279 = DEFINITIONAL_REPRESENTATION('',(#16280),#16284);+#16280 = LINE('',#16281,#16282);+#16281 = CARTESIAN_POINT('',(1.,0.));+#16282 = VECTOR('',#16283,1.);+#16283 = DIRECTION('',(0.,-1.));+#16284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16285 = ORIENTED_EDGE('',*,*,#15084,.T.);+#16286 = ORIENTED_EDGE('',*,*,#16238,.F.);+#16287 = ADVANCED_FACE('',(#16288),#6096,.T.);+#16288 = FACE_BOUND('',#16289,.T.);+#16289 = EDGE_LOOP('',(#16290,#16291,#16312,#16313));+#16290 = ORIENTED_EDGE('',*,*,#6070,.T.);+#16291 = ORIENTED_EDGE('',*,*,#16292,.T.);+#16292 = EDGE_CURVE('',#6035,#15039,#16293,.T.);+#16293 = SURFACE_CURVE('',#16294,(#16298,#16305),.PCURVE_S1.);+#16294 = LINE('',#16295,#16296);+#16295 = CARTESIAN_POINT('',(-0.660620157046,1.697269084505E-02,+ 2.1500001));+#16296 = VECTOR('',#16297,1.);+#16297 = DIRECTION('',(-0.,-0.,-1.));+#16298 = PCURVE('',#6096,#16299);+#16299 = DEFINITIONAL_REPRESENTATION('',(#16300),#16304);+#16300 = LINE('',#16301,#16302);+#16301 = CARTESIAN_POINT('',(0.,0.));+#16302 = VECTOR('',#16303,1.);+#16303 = DIRECTION('',(0.,-1.));+#16304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16305 = PCURVE('',#6054,#16306);+#16306 = DEFINITIONAL_REPRESENTATION('',(#16307),#16311);+#16307 = LINE('',#16308,#16309);+#16308 = CARTESIAN_POINT('',(1.,0.));+#16309 = VECTOR('',#16310,1.);+#16310 = DIRECTION('',(0.,-1.));+#16311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16312 = ORIENTED_EDGE('',*,*,#15061,.T.);+#16313 = ORIENTED_EDGE('',*,*,#16265,.F.);+#16314 = ADVANCED_FACE('',(#16315),#6054,.T.);+#16315 = FACE_BOUND('',#16316,.T.);+#16316 = EDGE_LOOP('',(#16317,#16318,#16339,#16340));+#16317 = ORIENTED_EDGE('',*,*,#6034,.T.);+#16318 = ORIENTED_EDGE('',*,*,#16319,.T.);+#16319 = EDGE_CURVE('',#5990,#15016,#16320,.T.);+#16320 = SURFACE_CURVE('',#16321,(#16325,#16332),.PCURVE_S1.);+#16321 = LINE('',#16322,#16323);+#16322 = CARTESIAN_POINT('',(-0.636954010657,0.118689309923,2.1500001));+#16323 = VECTOR('',#16324,1.);+#16324 = DIRECTION('',(-0.,-0.,-1.));+#16325 = PCURVE('',#6054,#16326);+#16326 = DEFINITIONAL_REPRESENTATION('',(#16327),#16331);+#16327 = LINE('',#16328,#16329);+#16328 = CARTESIAN_POINT('',(0.,0.));+#16329 = VECTOR('',#16330,1.);+#16330 = DIRECTION('',(0.,-1.));+#16331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16332 = PCURVE('',#6015,#16333);+#16333 = DEFINITIONAL_REPRESENTATION('',(#16334),#16338);+#16334 = LINE('',#16335,#16336);+#16335 = CARTESIAN_POINT('',(1.,0.));+#16336 = VECTOR('',#16337,1.);+#16337 = DIRECTION('',(0.,-1.));+#16338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16339 = ORIENTED_EDGE('',*,*,#15038,.T.);+#16340 = ORIENTED_EDGE('',*,*,#16292,.F.);+#16341 = ADVANCED_FACE('',(#16342),#6015,.T.);+#16342 = FACE_BOUND('',#16343,.T.);+#16343 = EDGE_LOOP('',(#16344,#16345,#16366,#16367));+#16344 = ORIENTED_EDGE('',*,*,#5989,.T.);+#16345 = ORIENTED_EDGE('',*,*,#16346,.T.);+#16346 = EDGE_CURVE('',#5954,#14993,#16347,.T.);+#16347 = SURFACE_CURVE('',#16348,(#16352,#16359),.PCURVE_S1.);+#16348 = LINE('',#16349,#16350);+#16349 = CARTESIAN_POINT('',(-0.56738988339,0.153232321573,2.1500001));+#16350 = VECTOR('',#16351,1.);+#16351 = DIRECTION('',(-0.,-0.,-1.));+#16352 = PCURVE('',#6015,#16353);+#16353 = DEFINITIONAL_REPRESENTATION('',(#16354),#16358);+#16354 = LINE('',#16355,#16356);+#16355 = CARTESIAN_POINT('',(0.,0.));+#16356 = VECTOR('',#16357,1.);+#16357 = DIRECTION('',(0.,-1.));+#16358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16359 = PCURVE('',#5973,#16360);+#16360 = DEFINITIONAL_REPRESENTATION('',(#16361),#16365);+#16361 = LINE('',#16362,#16363);+#16362 = CARTESIAN_POINT('',(1.,0.));+#16363 = VECTOR('',#16364,1.);+#16364 = DIRECTION('',(0.,-1.));+#16365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16366 = ORIENTED_EDGE('',*,*,#15015,.T.);+#16367 = ORIENTED_EDGE('',*,*,#16319,.F.);+#16368 = ADVANCED_FACE('',(#16369),#5973,.T.);+#16369 = FACE_BOUND('',#16370,.T.);+#16370 = EDGE_LOOP('',(#16371,#16372,#16393,#16394));+#16371 = ORIENTED_EDGE('',*,*,#5953,.T.);+#16372 = ORIENTED_EDGE('',*,*,#16373,.T.);+#16373 = EDGE_CURVE('',#5918,#14970,#16374,.T.);+#16374 = SURFACE_CURVE('',#16375,(#16379,#16386),.PCURVE_S1.);+#16375 = LINE('',#16376,#16377);+#16376 = CARTESIAN_POINT('',(-0.532010189798,0.14857080789,2.1500001));+#16377 = VECTOR('',#16378,1.);+#16378 = DIRECTION('',(-0.,-0.,-1.));+#16379 = PCURVE('',#5973,#16380);+#16380 = DEFINITIONAL_REPRESENTATION('',(#16381),#16385);+#16381 = LINE('',#16382,#16383);+#16382 = CARTESIAN_POINT('',(0.,0.));+#16383 = VECTOR('',#16384,1.);+#16384 = DIRECTION('',(0.,-1.));+#16385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16386 = PCURVE('',#5937,#16387);+#16387 = DEFINITIONAL_REPRESENTATION('',(#16388),#16392);+#16388 = LINE('',#16389,#16390);+#16389 = CARTESIAN_POINT('',(1.,0.));+#16390 = VECTOR('',#16391,1.);+#16391 = DIRECTION('',(0.,-1.));+#16392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16393 = ORIENTED_EDGE('',*,*,#14992,.T.);+#16394 = ORIENTED_EDGE('',*,*,#16346,.F.);+#16395 = ADVANCED_FACE('',(#16396),#5937,.T.);+#16396 = FACE_BOUND('',#16397,.T.);+#16397 = EDGE_LOOP('',(#16398,#16399,#16420,#16421));+#16398 = ORIENTED_EDGE('',*,*,#5917,.T.);+#16399 = ORIENTED_EDGE('',*,*,#16400,.T.);+#16400 = EDGE_CURVE('',#5891,#14947,#16401,.T.);+#16401 = SURFACE_CURVE('',#16402,(#16406,#16413),.PCURVE_S1.);+#16402 = LINE('',#16403,#16404);+#16403 = CARTESIAN_POINT('',(-0.499977223978,0.135064370809,2.1500001));+#16404 = VECTOR('',#16405,1.);+#16405 = DIRECTION('',(-0.,-0.,-1.));+#16406 = PCURVE('',#5937,#16407);+#16407 = DEFINITIONAL_REPRESENTATION('',(#16408),#16412);+#16408 = LINE('',#16409,#16410);+#16409 = CARTESIAN_POINT('',(0.,0.));+#16410 = VECTOR('',#16411,1.);+#16411 = DIRECTION('',(0.,-1.));+#16412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16413 = PCURVE('',#5906,#16414);+#16414 = DEFINITIONAL_REPRESENTATION('',(#16415),#16419);+#16415 = LINE('',#16416,#16417);+#16416 = CARTESIAN_POINT('',(4.446366897435E-02,0.));+#16417 = VECTOR('',#16418,1.);+#16418 = DIRECTION('',(0.,-1.));+#16419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16420 = ORIENTED_EDGE('',*,*,#14969,.T.);+#16421 = ORIENTED_EDGE('',*,*,#16373,.F.);+#16422 = ADVANCED_FACE('',(#16423),#5906,.T.);+#16423 = FACE_BOUND('',#16424,.T.);+#16424 = EDGE_LOOP('',(#16425,#16426,#16447,#16448));+#16425 = ORIENTED_EDGE('',*,*,#5890,.F.);+#16426 = ORIENTED_EDGE('',*,*,#16427,.T.);+#16427 = EDGE_CURVE('',#5853,#14945,#16428,.T.);+#16428 = SURFACE_CURVE('',#16429,(#16433,#16440),.PCURVE_S1.);+#16429 = LINE('',#16430,#16431);+#16430 = CARTESIAN_POINT('',(-0.499977223978,0.179528039784,2.1500001));+#16431 = VECTOR('',#16432,1.);+#16432 = DIRECTION('',(-0.,-0.,-1.));+#16433 = PCURVE('',#5906,#16434);+#16434 = DEFINITIONAL_REPRESENTATION('',(#16435),#16439);+#16435 = LINE('',#16436,#16437);+#16436 = CARTESIAN_POINT('',(0.,0.));+#16437 = VECTOR('',#16438,1.);+#16438 = DIRECTION('',(0.,-1.));+#16439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16440 = PCURVE('',#5874,#16441);+#16441 = DEFINITIONAL_REPRESENTATION('',(#16442),#16446);+#16442 = LINE('',#16443,#16444);+#16443 = CARTESIAN_POINT('',(1.,0.));+#16444 = VECTOR('',#16445,1.);+#16445 = DIRECTION('',(0.,-1.));+#16446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16447 = ORIENTED_EDGE('',*,*,#14944,.T.);+#16448 = ORIENTED_EDGE('',*,*,#16400,.F.);+#16449 = ADVANCED_FACE('',(#16450),#5874,.T.);+#16450 = FACE_BOUND('',#16451,.T.);+#16451 = EDGE_LOOP('',(#16452,#16453,#16454,#16455));+#16452 = ORIENTED_EDGE('',*,*,#5852,.T.);+#16453 = ORIENTED_EDGE('',*,*,#14920,.T.);+#16454 = ORIENTED_EDGE('',*,*,#15290,.T.);+#16455 = ORIENTED_EDGE('',*,*,#16427,.F.);+#16456 = ADVANCED_FACE('',(#16457),#5834,.T.);+#16457 = FACE_BOUND('',#16458,.T.);+#16458 = EDGE_LOOP('',(#16459,#16460,#16483,#16511));+#16459 = ORIENTED_EDGE('',*,*,#5816,.T.);+#16460 = ORIENTED_EDGE('',*,*,#16461,.T.);+#16461 = EDGE_CURVE('',#5772,#16462,#16464,.T.);+#16462 = VERTEX_POINT('',#16463);+#16463 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.0500001));+#16464 = SURFACE_CURVE('',#16465,(#16469,#16476),.PCURVE_S1.);+#16465 = LINE('',#16466,#16467);+#16466 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.1500001));+#16467 = VECTOR('',#16468,1.);+#16468 = DIRECTION('',(-0.,-0.,-1.));+#16469 = PCURVE('',#5834,#16470);+#16470 = DEFINITIONAL_REPRESENTATION('',(#16471),#16475);+#16471 = LINE('',#16472,#16473);+#16472 = CARTESIAN_POINT('',(0.,0.));+#16473 = VECTOR('',#16474,1.);+#16474 = DIRECTION('',(0.,-1.));+#16475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16476 = PCURVE('',#5797,#16477);+#16477 = DEFINITIONAL_REPRESENTATION('',(#16478),#16482);+#16478 = LINE('',#16479,#16480);+#16479 = CARTESIAN_POINT('',(1.,0.));+#16480 = VECTOR('',#16481,1.);+#16481 = DIRECTION('',(0.,-1.));+#16482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16483 = ORIENTED_EDGE('',*,*,#16484,.T.);+#16484 = EDGE_CURVE('',#16462,#16485,#16487,.T.);+#16485 = VERTEX_POINT('',#16486);+#16486 = CARTESIAN_POINT('',(-0.88628522969,-0.169487856467,2.0500001));+#16487 = SURFACE_CURVE('',#16488,(#16492,#16499),.PCURVE_S1.);+#16488 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16489,#16490,#16491),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16489 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.0500001));+#16490 = CARTESIAN_POINT('',(-0.823414557968,-0.169487856467,2.0500001)+ );+#16491 = CARTESIAN_POINT('',(-0.88628522969,-0.169487856467,2.0500001));+#16492 = PCURVE('',#5834,#16493);+#16493 = DEFINITIONAL_REPRESENTATION('',(#16494),#16498);+#16494 = LINE('',#16495,#16496);+#16495 = CARTESIAN_POINT('',(0.,-0.1));+#16496 = VECTOR('',#16497,1.);+#16497 = DIRECTION('',(1.,0.));+#16498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16499 = PCURVE('',#16500,#16505);+#16500 = PLANE('',#16501);+#16501 = AXIS2_PLACEMENT_3D('',#16502,#16503,#16504);+#16502 = CARTESIAN_POINT('',(-1.0316288358,-0.169487856467,2.0500001));+#16503 = DIRECTION('',(0.,0.,1.));+#16504 = DIRECTION('',(1.,0.,0.));+#16505 = DEFINITIONAL_REPRESENTATION('',(#16506),#16510);+#16506 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16507,#16508,#16509),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16507 = CARTESIAN_POINT('',(0.240008191668,2.474188031637E-02));+#16508 = CARTESIAN_POINT('',(0.208214277831,0.));+#16509 = CARTESIAN_POINT('',(0.14534360611,0.));+#16510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16511 = ORIENTED_EDGE('',*,*,#16512,.F.);+#16512 = EDGE_CURVE('',#5455,#16485,#16513,.T.);+#16513 = SURFACE_CURVE('',#16514,(#16518,#16525),.PCURVE_S1.);+#16514 = LINE('',#16515,#16516);+#16515 = CARTESIAN_POINT('',(-0.88628522969,-0.169487856467,2.1500001));+#16516 = VECTOR('',#16517,1.);+#16517 = DIRECTION('',(-0.,-0.,-1.));+#16518 = PCURVE('',#5834,#16519);+#16519 = DEFINITIONAL_REPRESENTATION('',(#16520),#16524);+#16520 = LINE('',#16521,#16522);+#16521 = CARTESIAN_POINT('',(1.,0.));+#16522 = VECTOR('',#16523,1.);+#16523 = DIRECTION('',(0.,-1.));+#16524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16525 = PCURVE('',#5472,#16526);+#16526 = DEFINITIONAL_REPRESENTATION('',(#16527),#16531);+#16527 = LINE('',#16528,#16529);+#16528 = CARTESIAN_POINT('',(0.,0.));+#16529 = VECTOR('',#16530,1.);+#16530 = DIRECTION('',(0.,-1.));+#16531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16532 = ADVANCED_FACE('',(#16533,#16764,#16970),#16500,.T.);+#16533 = FACE_BOUND('',#16534,.F.);+#16534 = EDGE_LOOP('',(#16535,#16560,#16583,#16606,#16629,#16652,#16675,+ #16698,#16721,#16742,#16743));+#16535 = ORIENTED_EDGE('',*,*,#16536,.T.);+#16536 = EDGE_CURVE('',#16537,#16539,#16541,.T.);+#16537 = VERTEX_POINT('',#16538);+#16538 = CARTESIAN_POINT('',(-0.9919462065,-0.169487856467,2.0500001));+#16539 = VERTEX_POINT('',#16540);+#16540 = CARTESIAN_POINT('',(-0.9919462065,0.187416755247,2.0500001));+#16541 = SURFACE_CURVE('',#16542,(#16546,#16553),.PCURVE_S1.);+#16542 = LINE('',#16543,#16544);+#16543 = CARTESIAN_POINT('',(-0.9919462065,-0.169487856467,2.0500001));+#16544 = VECTOR('',#16545,1.);+#16545 = DIRECTION('',(0.,1.,0.));+#16546 = PCURVE('',#16500,#16547);+#16547 = DEFINITIONAL_REPRESENTATION('',(#16548),#16552);+#16548 = LINE('',#16549,#16550);+#16549 = CARTESIAN_POINT('',(3.968262929969E-02,0.));+#16550 = VECTOR('',#16551,1.);+#16551 = DIRECTION('',(0.,1.));+#16552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16553 = PCURVE('',#5499,#16554);+#16554 = DEFINITIONAL_REPRESENTATION('',(#16555),#16559);+#16555 = LINE('',#16556,#16557);+#16556 = CARTESIAN_POINT('',(0.,-0.1));+#16557 = VECTOR('',#16558,1.);+#16558 = DIRECTION('',(1.,0.));+#16559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16560 = ORIENTED_EDGE('',*,*,#16561,.T.);+#16561 = EDGE_CURVE('',#16539,#16562,#16564,.T.);+#16562 = VERTEX_POINT('',#16563);+#16563 = CARTESIAN_POINT('',(-0.88628522969,0.187416755247,2.0500001));+#16564 = SURFACE_CURVE('',#16565,(#16569,#16576),.PCURVE_S1.);+#16565 = LINE('',#16566,#16567);+#16566 = CARTESIAN_POINT('',(-0.9919462065,0.187416755247,2.0500001));+#16567 = VECTOR('',#16568,1.);+#16568 = DIRECTION('',(1.,0.,0.));+#16569 = PCURVE('',#16500,#16570);+#16570 = DEFINITIONAL_REPRESENTATION('',(#16571),#16575);+#16571 = LINE('',#16572,#16573);+#16572 = CARTESIAN_POINT('',(3.968262929969E-02,0.356904611713));+#16573 = VECTOR('',#16574,1.);+#16574 = DIRECTION('',(1.,0.));+#16575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16576 = PCURVE('',#5526,#16577);+#16577 = DEFINITIONAL_REPRESENTATION('',(#16578),#16582);+#16578 = LINE('',#16579,#16580);+#16579 = CARTESIAN_POINT('',(0.,-0.1));+#16580 = VECTOR('',#16581,1.);+#16581 = DIRECTION('',(1.,0.));+#16582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16583 = ORIENTED_EDGE('',*,*,#16584,.T.);+#16584 = EDGE_CURVE('',#16562,#16585,#16587,.T.);+#16585 = VERTEX_POINT('',#16586);+#16586 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.0500001));+#16587 = SURFACE_CURVE('',#16588,(#16592,#16599),.PCURVE_S1.);+#16588 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16589,#16590,#16591),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16589 = CARTESIAN_POINT('',(-0.88628522969,0.187416755247,2.0500001));+#16590 = CARTESIAN_POINT('',(-0.831542325415,0.187416755247,2.0500001));+#16591 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.0500001));+#16592 = PCURVE('',#16500,#16593);+#16593 = DEFINITIONAL_REPRESENTATION('',(#16594),#16598);+#16594 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16595,#16596,#16597),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16595 = CARTESIAN_POINT('',(0.14534360611,0.356904611713));+#16596 = CARTESIAN_POINT('',(0.200086510385,0.356904611713));+#16597 = CARTESIAN_POINT('',(0.229728956367,0.333238465324));+#16598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16599 = PCURVE('',#5557,#16600);+#16600 = DEFINITIONAL_REPRESENTATION('',(#16601),#16605);+#16601 = LINE('',#16602,#16603);+#16602 = CARTESIAN_POINT('',(0.,-0.1));+#16603 = VECTOR('',#16604,1.);+#16604 = DIRECTION('',(1.,0.));+#16605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16606 = ORIENTED_EDGE('',*,*,#16607,.T.);+#16607 = EDGE_CURVE('',#16585,#16608,#16610,.T.);+#16608 = VERTEX_POINT('',#16609);+#16609 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.0500001+ ));+#16610 = SURFACE_CURVE('',#16611,(#16615,#16622),.PCURVE_S1.);+#16611 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16612,#16613,#16614),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16612 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.0500001));+#16613 = CARTESIAN_POINT('',(-0.77225743345,0.140084462468,2.0500001));+#16614 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.0500001+ ));+#16615 = PCURVE('',#16500,#16616);+#16616 = DEFINITIONAL_REPRESENTATION('',(#16617),#16621);+#16617 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16618,#16619,#16620),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16618 = CARTESIAN_POINT('',(0.229728956367,0.333238465324));+#16619 = CARTESIAN_POINT('',(0.25937140235,0.309572318934));+#16620 = CARTESIAN_POINT('',(0.25937140235,0.266303909879));+#16621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16622 = PCURVE('',#5599,#16623);+#16623 = DEFINITIONAL_REPRESENTATION('',(#16624),#16628);+#16624 = LINE('',#16625,#16626);+#16625 = CARTESIAN_POINT('',(0.,-0.1));+#16626 = VECTOR('',#16627,1.);+#16627 = DIRECTION('',(1.,0.));+#16628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16629 = ORIENTED_EDGE('',*,*,#16630,.T.);+#16630 = EDGE_CURVE('',#16608,#16631,#16633,.T.);+#16631 = VERTEX_POINT('',#16632);+#16632 = CARTESIAN_POINT('',(-0.787915338384,4.518082492555E-02,+ 2.0500001));+#16633 = SURFACE_CURVE('',#16634,(#16638,#16645),.PCURVE_S1.);+#16634 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16635,#16636,#16637),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16635 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.0500001+ ));+#16636 = CARTESIAN_POINT('',(-0.77225743345,6.406593164046E-02,2.0500001+ ));+#16637 = CARTESIAN_POINT('',(-0.787915338384,4.518082492555E-02,+ 2.0500001));+#16638 = PCURVE('',#16500,#16639);+#16639 = DEFINITIONAL_REPRESENTATION('',(#16640),#16644);+#16640 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16641,#16642,#16643),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16641 = CARTESIAN_POINT('',(0.25937140235,0.266303909879));+#16642 = CARTESIAN_POINT('',(0.25937140235,0.233553788107));+#16643 = CARTESIAN_POINT('',(0.243713497416,0.214668681392));+#16644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16645 = PCURVE('',#5638,#16646);+#16646 = DEFINITIONAL_REPRESENTATION('',(#16647),#16651);+#16647 = LINE('',#16648,#16649);+#16648 = CARTESIAN_POINT('',(0.,-0.1));+#16649 = VECTOR('',#16650,1.);+#16650 = DIRECTION('',(1.,0.));+#16651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16652 = ORIENTED_EDGE('',*,*,#16653,.T.);+#16653 = EDGE_CURVE('',#16631,#16654,#16656,.T.);+#16654 = VERTEX_POINT('',#16655);+#16655 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,+ 2.0500001));+#16656 = SURFACE_CURVE('',#16657,(#16661,#16668),.PCURVE_S1.);+#16657 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16658,#16659,#16660),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16658 = CARTESIAN_POINT('',(-0.787915338384,4.518082492555E-02,+ 2.0500001));+#16659 = CARTESIAN_POINT('',(-0.803573243319,2.629571821064E-02,+ 2.0500001));+#16660 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,+ 2.0500001));+#16661 = PCURVE('',#16500,#16662);+#16662 = DEFINITIONAL_REPRESENTATION('',(#16663),#16667);+#16663 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16664,#16665,#16666),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16664 = CARTESIAN_POINT('',(0.243713497416,0.214668681392));+#16665 = CARTESIAN_POINT('',(0.228055592481,0.195783574677));+#16666 = CARTESIAN_POINT('',(0.196739782612,0.191002535003));+#16667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16668 = PCURVE('',#5674,#16669);+#16669 = DEFINITIONAL_REPRESENTATION('',(#16670),#16674);+#16670 = LINE('',#16671,#16672);+#16671 = CARTESIAN_POINT('',(0.,-0.1));+#16672 = VECTOR('',#16673,1.);+#16673 = DIRECTION('',(1.,0.));+#16674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16675 = ORIENTED_EDGE('',*,*,#16676,.T.);+#16676 = EDGE_CURVE('',#16654,#16677,#16679,.T.);+#16677 = VERTEX_POINT('',#16678);+#16678 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,+ 2.0500001));+#16679 = SURFACE_CURVE('',#16680,(#16684,#16691),.PCURVE_S1.);+#16680 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16681,#16682,#16683),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16681 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,+ 2.0500001));+#16682 = CARTESIAN_POINT('',(-0.799748411579,1.625553489385E-02,+ 2.0500001));+#16683 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,+ 2.0500001));+#16684 = PCURVE('',#16500,#16685);+#16685 = DEFINITIONAL_REPRESENTATION('',(#16686),#16690);+#16686 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16687,#16688,#16689),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16687 = CARTESIAN_POINT('',(0.196739782612,0.191002535003));+#16688 = CARTESIAN_POINT('',(0.231880424221,0.185743391361));+#16689 = CARTESIAN_POINT('',(0.251841264863,0.161001511044));+#16690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16691 = PCURVE('',#5716,#16692);+#16692 = DEFINITIONAL_REPRESENTATION('',(#16693),#16697);+#16693 = LINE('',#16694,#16695);+#16694 = CARTESIAN_POINT('',(0.,-0.1));+#16695 = VECTOR('',#16696,1.);+#16696 = DIRECTION('',(1.,0.));+#16697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16698 = ORIENTED_EDGE('',*,*,#16699,.T.);+#16699 = EDGE_CURVE('',#16677,#16700,#16702,.T.);+#16700 = VERTEX_POINT('',#16701);+#16701 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,+ 2.0500001));+#16702 = SURFACE_CURVE('',#16703,(#16707,#16714),.PCURVE_S1.);+#16703 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16704,#16705,#16706),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16704 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,+ 2.0500001));+#16705 = CARTESIAN_POINT('',(-0.759826730295,-3.322822573889E-02,+ 2.0500001));+#16706 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,+ 2.0500001));+#16707 = PCURVE('',#16500,#16708);+#16708 = DEFINITIONAL_REPRESENTATION('',(#16709),#16713);+#16709 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16710,#16711,#16712),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16710 = CARTESIAN_POINT('',(0.251841264863,0.161001511044));+#16711 = CARTESIAN_POINT('',(0.271802105504,0.136259630728));+#16712 = CARTESIAN_POINT('',(0.271802105504,9.801131333055E-02));+#16713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16714 = PCURVE('',#5755,#16715);+#16715 = DEFINITIONAL_REPRESENTATION('',(#16716),#16720);+#16716 = LINE('',#16717,#16718);+#16717 = CARTESIAN_POINT('',(0.,-0.1));+#16718 = VECTOR('',#16719,1.);+#16719 = DIRECTION('',(1.,0.));+#16720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16721 = ORIENTED_EDGE('',*,*,#16722,.T.);+#16722 = EDGE_CURVE('',#16700,#16462,#16723,.T.);+#16723 = SURFACE_CURVE('',#16724,(#16728,#16735),.PCURVE_S1.);+#16724 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16725,#16726,#16727),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16725 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,+ 2.0500001));+#16726 = CARTESIAN_POINT('',(-0.759826730295,-0.120004095834,2.0500001)+ );+#16727 = CARTESIAN_POINT('',(-0.791620644132,-0.14474597615,2.0500001));+#16728 = PCURVE('',#16500,#16729);+#16729 = DEFINITIONAL_REPRESENTATION('',(#16730),#16734);+#16730 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16731,#16732,#16733),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16731 = CARTESIAN_POINT('',(0.271802105504,9.801131333055E-02));+#16732 = CARTESIAN_POINT('',(0.271802105504,4.948376063274E-02));+#16733 = CARTESIAN_POINT('',(0.240008191668,2.474188031637E-02));+#16734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16735 = PCURVE('',#5797,#16736);+#16736 = DEFINITIONAL_REPRESENTATION('',(#16737),#16741);+#16737 = LINE('',#16738,#16739);+#16738 = CARTESIAN_POINT('',(0.,-0.1));+#16739 = VECTOR('',#16740,1.);+#16740 = DIRECTION('',(1.,0.));+#16741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16742 = ORIENTED_EDGE('',*,*,#16484,.T.);+#16743 = ORIENTED_EDGE('',*,*,#16744,.T.);+#16744 = EDGE_CURVE('',#16485,#16537,#16745,.T.);+#16745 = SURFACE_CURVE('',#16746,(#16750,#16757),.PCURVE_S1.);+#16746 = LINE('',#16747,#16748);+#16747 = CARTESIAN_POINT('',(-0.88628522969,-0.169487856467,2.0500001));+#16748 = VECTOR('',#16749,1.);+#16749 = DIRECTION('',(-1.,0.,0.));+#16750 = PCURVE('',#16500,#16751);+#16751 = DEFINITIONAL_REPRESENTATION('',(#16752),#16756);+#16752 = LINE('',#16753,#16754);+#16753 = CARTESIAN_POINT('',(0.14534360611,0.));+#16754 = VECTOR('',#16755,1.);+#16755 = DIRECTION('',(-1.,0.));+#16756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16757 = PCURVE('',#5472,#16758);+#16758 = DEFINITIONAL_REPRESENTATION('',(#16759),#16763);+#16759 = LINE('',#16760,#16761);+#16760 = CARTESIAN_POINT('',(0.,-0.1));+#16761 = VECTOR('',#16762,1.);+#16762 = DIRECTION('',(1.,0.));+#16763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16764 = FACE_BOUND('',#16765,.F.);+#16765 = EDGE_LOOP('',(#16766,#16796,#16824,#16852,#16882,#16912,#16942)+ );+#16766 = ORIENTED_EDGE('',*,*,#16767,.T.);+#16767 = EDGE_CURVE('',#16768,#16770,#16772,.T.);+#16768 = VERTEX_POINT('',#16769);+#16769 = CARTESIAN_POINT('',(-0.88628522969,9.562079349322E-04,2.0500001+ ));+#16770 = VERTEX_POINT('',#16771);+#16771 = CARTESIAN_POINT('',(-0.943418653802,9.562079349322E-04,+ 2.0500001));+#16772 = SURFACE_CURVE('',#16773,(#16777,#16784),.PCURVE_S1.);+#16773 = LINE('',#16774,#16775);+#16774 = CARTESIAN_POINT('',(-0.88628522969,9.562079349322E-04,2.0500001+ ));+#16775 = VECTOR('',#16776,1.);+#16776 = DIRECTION('',(-1.,0.,0.));+#16777 = PCURVE('',#16500,#16778);+#16778 = DEFINITIONAL_REPRESENTATION('',(#16779),#16783);+#16779 = LINE('',#16780,#16781);+#16780 = CARTESIAN_POINT('',(0.14534360611,0.170444064402));+#16781 = VECTOR('',#16782,1.);+#16782 = DIRECTION('',(-1.,0.));+#16783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16784 = PCURVE('',#16785,#16790);+#16785 = PLANE('',#16786);+#16786 = AXIS2_PLACEMENT_3D('',#16787,#16788,#16789);+#16787 = CARTESIAN_POINT('',(-0.88628522969,9.562079349322E-04,2.1500001+ ));+#16788 = DIRECTION('',(0.,1.,0.));+#16789 = DIRECTION('',(-1.,0.,0.));+#16790 = DEFINITIONAL_REPRESENTATION('',(#16791),#16795);+#16791 = LINE('',#16792,#16793);+#16792 = CARTESIAN_POINT('',(0.,-0.1));+#16793 = VECTOR('',#16794,1.);+#16794 = DIRECTION('',(1.,0.));+#16795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16796 = ORIENTED_EDGE('',*,*,#16797,.T.);+#16797 = EDGE_CURVE('',#16770,#16798,#16800,.T.);+#16798 = VERTEX_POINT('',#16799);+#16799 = CARTESIAN_POINT('',(-0.943418653802,-0.129805227167,2.0500001)+ );+#16800 = SURFACE_CURVE('',#16801,(#16805,#16812),.PCURVE_S1.);+#16801 = LINE('',#16802,#16803);+#16802 = CARTESIAN_POINT('',(-0.943418653802,9.562079349322E-04,+ 2.0500001));+#16803 = VECTOR('',#16804,1.);+#16804 = DIRECTION('',(0.,-1.,0.));+#16805 = PCURVE('',#16500,#16806);+#16806 = DEFINITIONAL_REPRESENTATION('',(#16807),#16811);+#16807 = LINE('',#16808,#16809);+#16808 = CARTESIAN_POINT('',(8.821018199749E-02,0.170444064402));+#16809 = VECTOR('',#16810,1.);+#16810 = DIRECTION('',(0.,-1.));+#16811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16812 = PCURVE('',#16813,#16818);+#16813 = PLANE('',#16814);+#16814 = AXIS2_PLACEMENT_3D('',#16815,#16816,#16817);+#16815 = CARTESIAN_POINT('',(-0.943418653802,9.562079349322E-04,+ 2.1500001));+#16816 = DIRECTION('',(-1.,0.,0.));+#16817 = DIRECTION('',(0.,-1.,0.));+#16818 = DEFINITIONAL_REPRESENTATION('',(#16819),#16823);+#16819 = LINE('',#16820,#16821);+#16820 = CARTESIAN_POINT('',(0.,-0.1));+#16821 = VECTOR('',#16822,1.);+#16822 = DIRECTION('',(1.,0.));+#16823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16824 = ORIENTED_EDGE('',*,*,#16825,.T.);+#16825 = EDGE_CURVE('',#16798,#16826,#16828,.T.);+#16826 = VERTEX_POINT('',#16827);+#16827 = CARTESIAN_POINT('',(-0.88628522969,-0.129805227167,2.0500001));+#16828 = SURFACE_CURVE('',#16829,(#16833,#16840),.PCURVE_S1.);+#16829 = LINE('',#16830,#16831);+#16830 = CARTESIAN_POINT('',(-0.943418653802,-0.129805227167,2.0500001)+ );+#16831 = VECTOR('',#16832,1.);+#16832 = DIRECTION('',(1.,0.,0.));+#16833 = PCURVE('',#16500,#16834);+#16834 = DEFINITIONAL_REPRESENTATION('',(#16835),#16839);+#16835 = LINE('',#16836,#16837);+#16836 = CARTESIAN_POINT('',(8.821018199749E-02,3.968262929969E-02));+#16837 = VECTOR('',#16838,1.);+#16838 = DIRECTION('',(1.,0.));+#16839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16840 = PCURVE('',#16841,#16846);+#16841 = PLANE('',#16842);+#16842 = AXIS2_PLACEMENT_3D('',#16843,#16844,#16845);+#16843 = CARTESIAN_POINT('',(-0.943418653802,-0.129805227167,2.1500001)+ );+#16844 = DIRECTION('',(0.,-1.,0.));+#16845 = DIRECTION('',(1.,0.,0.));+#16846 = DEFINITIONAL_REPRESENTATION('',(#16847),#16851);+#16847 = LINE('',#16848,#16849);+#16848 = CARTESIAN_POINT('',(0.,-0.1));+#16849 = VECTOR('',#16850,1.);+#16850 = DIRECTION('',(1.,0.));+#16851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16852 = ORIENTED_EDGE('',*,*,#16853,.T.);+#16853 = EDGE_CURVE('',#16826,#16854,#16856,.T.);+#16854 = VERTEX_POINT('',#16855);+#16855 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.0500001)+ );+#16856 = SURFACE_CURVE('',#16857,(#16861,#16868),.PCURVE_S1.);+#16857 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16858,#16859,#16860),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16858 = CARTESIAN_POINT('',(-0.88628522969,-0.129805227167,2.0500001));+#16859 = CARTESIAN_POINT('',(-0.844212080553,-0.129805227167,2.0500001)+ );+#16860 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.0500001)+ );+#16861 = PCURVE('',#16500,#16862);+#16862 = DEFINITIONAL_REPRESENTATION('',(#16863),#16867);+#16863 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16864,#16865,#16866),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16864 = CARTESIAN_POINT('',(0.14534360611,3.968262929969E-02));+#16865 = CARTESIAN_POINT('',(0.187416755247,3.968262929969E-02));+#16866 = CARTESIAN_POINT('',(0.205345654027,5.438432629927E-02));+#16867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16868 = PCURVE('',#16869,#16876);+#16869 = SURFACE_OF_LINEAR_EXTRUSION('',#16870,#16874);+#16870 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16871,#16872,#16873),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16871 = CARTESIAN_POINT('',(-0.88628522969,-0.129805227167,2.1500001));+#16872 = CARTESIAN_POINT('',(-0.844212080553,-0.129805227167,2.1500001)+ );+#16873 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.1500001)+ );+#16874 = VECTOR('',#16875,1.);+#16875 = DIRECTION('',(0.,0.,1.));+#16876 = DEFINITIONAL_REPRESENTATION('',(#16877),#16881);+#16877 = LINE('',#16878,#16879);+#16878 = CARTESIAN_POINT('',(0.,-0.1));+#16879 = VECTOR('',#16880,1.);+#16880 = DIRECTION('',(1.,0.));+#16881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16882 = ORIENTED_EDGE('',*,*,#16883,.T.);+#16883 = EDGE_CURVE('',#16854,#16884,#16886,.T.);+#16884 = VERTEX_POINT('',#16885);+#16885 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,+ 2.0500001));+#16886 = SURFACE_CURVE('',#16887,(#16891,#16898),.PCURVE_S1.);+#16887 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16888,#16889,#16890),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16888 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.0500001)+ );+#16889 = CARTESIAN_POINT('',(-0.808354282993,-0.100401833168,2.0500001)+ );+#16890 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,+ 2.0500001));+#16891 = PCURVE('',#16500,#16892);+#16892 = DEFINITIONAL_REPRESENTATION('',(#16893),#16897);+#16893 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16894,#16895,#16896),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16894 = CARTESIAN_POINT('',(0.205345654027,5.438432629927E-02));+#16895 = CARTESIAN_POINT('',(0.223274552807,6.908602329885E-02));+#16896 = CARTESIAN_POINT('',(0.223274552807,0.102792353005));+#16897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16898 = PCURVE('',#16899,#16906);+#16899 = SURFACE_OF_LINEAR_EXTRUSION('',#16900,#16904);+#16900 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16901,#16902,#16903),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16901 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.1500001)+ );+#16902 = CARTESIAN_POINT('',(-0.808354282993,-0.100401833168,2.1500001)+ );+#16903 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,+ 2.1500001));+#16904 = VECTOR('',#16905,1.);+#16905 = DIRECTION('',(0.,0.,1.));+#16906 = DEFINITIONAL_REPRESENTATION('',(#16907),#16911);+#16907 = LINE('',#16908,#16909);+#16908 = CARTESIAN_POINT('',(0.,-0.1));+#16909 = VECTOR('',#16910,1.);+#16910 = DIRECTION('',(1.,0.));+#16911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16912 = ORIENTED_EDGE('',*,*,#16913,.T.);+#16913 = EDGE_CURVE('',#16884,#16914,#16916,.T.);+#16914 = VERTEX_POINT('',#16915);+#16915 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,+ 2.0500001));+#16916 = SURFACE_CURVE('',#16917,(#16921,#16928),.PCURVE_S1.);+#16917 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16918,#16919,#16920),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16918 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,+ 2.0500001));+#16919 = CARTESIAN_POINT('',(-0.808354282993,-3.17939138365E-02,+ 2.0500001));+#16920 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,+ 2.0500001));+#16921 = PCURVE('',#16500,#16922);+#16922 = DEFINITIONAL_REPRESENTATION('',(#16923),#16927);+#16923 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16924,#16925,#16926),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16924 = CARTESIAN_POINT('',(0.223274552807,0.102792353005));+#16925 = CARTESIAN_POINT('',(0.223274552807,0.13769394263));+#16926 = CARTESIAN_POINT('',(0.204389446092,0.154069003516));+#16927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16928 = PCURVE('',#16929,#16936);+#16929 = SURFACE_OF_LINEAR_EXTRUSION('',#16930,#16934);+#16930 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16931,#16932,#16933),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16931 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,+ 2.1500001));+#16932 = CARTESIAN_POINT('',(-0.808354282993,-3.17939138365E-02,+ 2.1500001));+#16933 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,+ 2.1500001));+#16934 = VECTOR('',#16935,1.);+#16935 = DIRECTION('',(0.,0.,1.));+#16936 = DEFINITIONAL_REPRESENTATION('',(#16937),#16941);+#16937 = LINE('',#16938,#16939);+#16938 = CARTESIAN_POINT('',(0.,-0.1));+#16939 = VECTOR('',#16940,1.);+#16940 = DIRECTION('',(1.,0.));+#16941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16942 = ORIENTED_EDGE('',*,*,#16943,.T.);+#16943 = EDGE_CURVE('',#16914,#16768,#16944,.T.);+#16944 = SURFACE_CURVE('',#16945,(#16949,#16956),.PCURVE_S1.);+#16945 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16946,#16947,#16948),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16946 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,+ 2.0500001));+#16947 = CARTESIAN_POINT('',(-0.846124496423,9.562079349322E-04,+ 2.0500001));+#16948 = CARTESIAN_POINT('',(-0.88628522969,9.562079349322E-04,2.0500001+ ));+#16949 = PCURVE('',#16500,#16950);+#16950 = DEFINITIONAL_REPRESENTATION('',(#16951),#16955);+#16951 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16952,#16953,#16954),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16952 = CARTESIAN_POINT('',(0.204389446092,0.154069003516));+#16953 = CARTESIAN_POINT('',(0.185504339377,0.170444064402));+#16954 = CARTESIAN_POINT('',(0.14534360611,0.170444064402));+#16955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16956 = PCURVE('',#16957,#16964);+#16957 = SURFACE_OF_LINEAR_EXTRUSION('',#16958,#16962);+#16958 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16959,#16960,#16961),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16959 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,+ 2.1500001));+#16960 = CARTESIAN_POINT('',(-0.846124496423,9.562079349322E-04,+ 2.1500001));+#16961 = CARTESIAN_POINT('',(-0.88628522969,9.562079349322E-04,2.1500001+ ));+#16962 = VECTOR('',#16963,1.);+#16963 = DIRECTION('',(0.,0.,1.));+#16964 = DEFINITIONAL_REPRESENTATION('',(#16965),#16969);+#16965 = LINE('',#16966,#16967);+#16966 = CARTESIAN_POINT('',(0.,-0.1));+#16967 = VECTOR('',#16968,1.);+#16968 = DIRECTION('',(1.,0.));+#16969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16970 = FACE_BOUND('',#16971,.F.);+#16971 = EDGE_LOOP('',(#16972,#17002,#17030,#17058,#17088,#17118,#17148)+ );+#16972 = ORIENTED_EDGE('',*,*,#16973,.T.);+#16973 = EDGE_CURVE('',#16974,#16976,#16978,.T.);+#16974 = VERTEX_POINT('',#16975);+#16975 = CARTESIAN_POINT('',(-0.887241437625,0.147734125947,2.0500001));+#16976 = VERTEX_POINT('',#16977);+#16977 = CARTESIAN_POINT('',(-0.943418653802,0.147734125947,2.0500001));+#16978 = SURFACE_CURVE('',#16979,(#16983,#16990),.PCURVE_S1.);+#16979 = LINE('',#16980,#16981);+#16980 = CARTESIAN_POINT('',(-0.887241437625,0.147734125947,2.0500001));+#16981 = VECTOR('',#16982,1.);+#16982 = DIRECTION('',(-1.,0.,0.));+#16983 = PCURVE('',#16500,#16984);+#16984 = DEFINITIONAL_REPRESENTATION('',(#16985),#16989);+#16985 = LINE('',#16986,#16987);+#16986 = CARTESIAN_POINT('',(0.144387398175,0.317221982414));+#16987 = VECTOR('',#16988,1.);+#16988 = DIRECTION('',(-1.,0.));+#16989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16990 = PCURVE('',#16991,#16996);+#16991 = PLANE('',#16992);+#16992 = AXIS2_PLACEMENT_3D('',#16993,#16994,#16995);+#16993 = CARTESIAN_POINT('',(-0.887241437625,0.147734125947,2.1500001));+#16994 = DIRECTION('',(0.,1.,0.));+#16995 = DIRECTION('',(-1.,0.,0.));+#16996 = DEFINITIONAL_REPRESENTATION('',(#16997),#17001);+#16997 = LINE('',#16998,#16999);+#16998 = CARTESIAN_POINT('',(0.,-0.1));+#16999 = VECTOR('',#17000,1.);+#17000 = DIRECTION('',(1.,0.));+#17001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17002 = ORIENTED_EDGE('',*,*,#17003,.T.);+#17003 = EDGE_CURVE('',#16976,#17004,#17006,.T.);+#17004 = VERTEX_POINT('',#17005);+#17005 = CARTESIAN_POINT('',(-0.943418653802,4.016073326715E-02,+ 2.0500001));+#17006 = SURFACE_CURVE('',#17007,(#17011,#17018),.PCURVE_S1.);+#17007 = LINE('',#17008,#17009);+#17008 = CARTESIAN_POINT('',(-0.943418653802,0.147734125947,2.0500001));+#17009 = VECTOR('',#17010,1.);+#17010 = DIRECTION('',(0.,-1.,0.));+#17011 = PCURVE('',#16500,#17012);+#17012 = DEFINITIONAL_REPRESENTATION('',(#17013),#17017);+#17013 = LINE('',#17014,#17015);+#17014 = CARTESIAN_POINT('',(8.821018199749E-02,0.317221982414));+#17015 = VECTOR('',#17016,1.);+#17016 = DIRECTION('',(0.,-1.));+#17017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17018 = PCURVE('',#17019,#17024);+#17019 = PLANE('',#17020);+#17020 = AXIS2_PLACEMENT_3D('',#17021,#17022,#17023);+#17021 = CARTESIAN_POINT('',(-0.943418653802,0.147734125947,2.1500001));+#17022 = DIRECTION('',(-1.,0.,0.));+#17023 = DIRECTION('',(0.,-1.,0.));+#17024 = DEFINITIONAL_REPRESENTATION('',(#17025),#17029);+#17025 = LINE('',#17026,#17027);+#17026 = CARTESIAN_POINT('',(0.,-0.1));+#17027 = VECTOR('',#17028,1.);+#17028 = DIRECTION('',(1.,0.));+#17029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17030 = ORIENTED_EDGE('',*,*,#17031,.T.);+#17031 = EDGE_CURVE('',#17004,#17032,#17034,.T.);+#17032 = VERTEX_POINT('',#17033);+#17033 = CARTESIAN_POINT('',(-0.887241437625,4.016073326715E-02,+ 2.0500001));+#17034 = SURFACE_CURVE('',#17035,(#17039,#17046),.PCURVE_S1.);+#17035 = LINE('',#17036,#17037);+#17036 = CARTESIAN_POINT('',(-0.943418653802,4.016073326715E-02,+ 2.0500001));+#17037 = VECTOR('',#17038,1.);+#17038 = DIRECTION('',(1.,0.,0.));+#17039 = PCURVE('',#16500,#17040);+#17040 = DEFINITIONAL_REPRESENTATION('',(#17041),#17045);+#17041 = LINE('',#17042,#17043);+#17042 = CARTESIAN_POINT('',(8.821018199749E-02,0.209648589734));+#17043 = VECTOR('',#17044,1.);+#17044 = DIRECTION('',(1.,0.));+#17045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17046 = PCURVE('',#17047,#17052);+#17047 = PLANE('',#17048);+#17048 = AXIS2_PLACEMENT_3D('',#17049,#17050,#17051);+#17049 = CARTESIAN_POINT('',(-0.943418653802,4.016073326715E-02,+ 2.1500001));+#17050 = DIRECTION('',(0.,-1.,0.));+#17051 = DIRECTION('',(1.,0.,0.));+#17052 = DEFINITIONAL_REPRESENTATION('',(#17053),#17057);+#17053 = LINE('',#17054,#17055);+#17054 = CARTESIAN_POINT('',(0.,-0.1));+#17055 = VECTOR('',#17056,1.);+#17056 = DIRECTION('',(1.,0.));+#17057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17058 = ORIENTED_EDGE('',*,*,#17059,.T.);+#17059 = EDGE_CURVE('',#17032,#17060,#17062,.T.);+#17060 = VERTEX_POINT('',#17061);+#17061 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.0500001+ ));+#17062 = SURFACE_CURVE('',#17063,(#17067,#17074),.PCURVE_S1.);+#17063 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17064,#17065,#17066),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17064 = CARTESIAN_POINT('',(-0.887241437625,4.016073326715E-02,+ 2.0500001));+#17065 = CARTESIAN_POINT('',(-0.852339848,4.016073326715E-02,2.0500001)+ );+#17066 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.0500001+ ));+#17067 = PCURVE('',#16500,#17068);+#17068 = DEFINITIONAL_REPRESENTATION('',(#17069),#17073);+#17069 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17070,#17071,#17072),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17070 = CARTESIAN_POINT('',(0.144387398175,0.209648589734));+#17071 = CARTESIAN_POINT('',(0.1792889878,0.209648589734));+#17072 = CARTESIAN_POINT('',(0.194946892734,0.223035500823));+#17073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17074 = PCURVE('',#17075,#17082);+#17075 = SURFACE_OF_LINEAR_EXTRUSION('',#17076,#17080);+#17076 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17077,#17078,#17079),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17077 = CARTESIAN_POINT('',(-0.887241437625,4.016073326715E-02,+ 2.1500001));+#17078 = CARTESIAN_POINT('',(-0.852339848,4.016073326715E-02,2.1500001)+ );+#17079 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.1500001+ ));+#17080 = VECTOR('',#17081,1.);+#17081 = DIRECTION('',(0.,0.,1.));+#17082 = DEFINITIONAL_REPRESENTATION('',(#17083),#17087);+#17083 = LINE('',#17084,#17085);+#17084 = CARTESIAN_POINT('',(0.,-0.1));+#17085 = VECTOR('',#17086,1.);+#17086 = DIRECTION('',(1.,0.));+#17087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17088 = ORIENTED_EDGE('',*,*,#17089,.T.);+#17089 = EDGE_CURVE('',#17060,#17090,#17092,.T.);+#17090 = VERTEX_POINT('',#17091);+#17091 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,+ 2.0500001));+#17092 = SURFACE_CURVE('',#17093,(#17097,#17104),.PCURVE_S1.);+#17093 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17094,#17095,#17096),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17094 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.0500001+ ));+#17095 = CARTESIAN_POINT('',(-0.821024038131,6.693455544525E-02,+ 2.0500001));+#17096 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,+ 2.0500001));+#17097 = PCURVE('',#16500,#17098);+#17098 = DEFINITIONAL_REPRESENTATION('',(#17099),#17103);+#17099 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17100,#17101,#17102),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17100 = CARTESIAN_POINT('',(0.194946892734,0.223035500823));+#17101 = CARTESIAN_POINT('',(0.210604797669,0.236422411912));+#17102 = CARTESIAN_POINT('',(0.210604797669,0.266303909879));+#17103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17104 = PCURVE('',#17105,#17112);+#17105 = SURFACE_OF_LINEAR_EXTRUSION('',#17106,#17110);+#17106 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17107,#17108,#17109),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17107 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.1500001+ ));+#17108 = CARTESIAN_POINT('',(-0.821024038131,6.693455544525E-02,+ 2.1500001));+#17109 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,+ 2.1500001));+#17110 = VECTOR('',#17111,1.);+#17111 = DIRECTION('',(0.,0.,1.));+#17112 = DEFINITIONAL_REPRESENTATION('',(#17113),#17117);+#17113 = LINE('',#17114,#17115);+#17114 = CARTESIAN_POINT('',(0.,-0.1));+#17115 = VECTOR('',#17116,1.);+#17116 = DIRECTION('',(1.,0.));+#17117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17118 = ORIENTED_EDGE('',*,*,#17119,.T.);+#17119 = EDGE_CURVE('',#17090,#17120,#17122,.T.);+#17120 = VERTEX_POINT('',#17121);+#17121 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.0500001));+#17122 = SURFACE_CURVE('',#17123,(#17127,#17134),.PCURVE_S1.);+#17123 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17124,#17125,#17126),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17124 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,+ 2.0500001));+#17125 = CARTESIAN_POINT('',(-0.821024038131,0.123828927574,2.0500001));+#17126 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.0500001));+#17127 = PCURVE('',#16500,#17128);+#17128 = DEFINITIONAL_REPRESENTATION('',(#17129),#17133);+#17129 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17130,#17131,#17132),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17130 = CARTESIAN_POINT('',(0.210604797669,0.266303909879));+#17131 = CARTESIAN_POINT('',(0.210604797669,0.29331678404));+#17132 = CARTESIAN_POINT('',(0.195185944718,0.305269383227));+#17133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17134 = PCURVE('',#17135,#17142);+#17135 = SURFACE_OF_LINEAR_EXTRUSION('',#17136,#17140);+#17136 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17137,#17138,#17139),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17137 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,+ 2.1500001));+#17138 = CARTESIAN_POINT('',(-0.821024038131,0.123828927574,2.1500001));+#17139 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.1500001));+#17140 = VECTOR('',#17141,1.);+#17141 = DIRECTION('',(0.,0.,1.));+#17142 = DEFINITIONAL_REPRESENTATION('',(#17143),#17147);+#17143 = LINE('',#17144,#17145);+#17144 = CARTESIAN_POINT('',(0.,-0.1));+#17145 = VECTOR('',#17146,1.);+#17146 = DIRECTION('',(1.,0.));+#17147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17148 = ORIENTED_EDGE('',*,*,#17149,.T.);+#17149 = EDGE_CURVE('',#17120,#16974,#17150,.T.);+#17150 = SURFACE_CURVE('',#17151,(#17155,#17162),.PCURVE_S1.);+#17151 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17152,#17153,#17154),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17152 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.0500001));+#17153 = CARTESIAN_POINT('',(-0.851861744033,0.147734125947,2.0500001));+#17154 = CARTESIAN_POINT('',(-0.887241437625,0.147734125947,2.0500001));+#17155 = PCURVE('',#16500,#17156);+#17156 = DEFINITIONAL_REPRESENTATION('',(#17157),#17161);+#17157 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17158,#17159,#17160),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17158 = CARTESIAN_POINT('',(0.195185944718,0.305269383227));+#17159 = CARTESIAN_POINT('',(0.179767091767,0.317221982414));+#17160 = CARTESIAN_POINT('',(0.144387398175,0.317221982414));+#17161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17162 = PCURVE('',#17163,#17170);+#17163 = SURFACE_OF_LINEAR_EXTRUSION('',#17164,#17168);+#17164 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17165,#17166,#17167),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17165 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.1500001));+#17166 = CARTESIAN_POINT('',(-0.851861744033,0.147734125947,2.1500001));+#17167 = CARTESIAN_POINT('',(-0.887241437625,0.147734125947,2.1500001));+#17168 = VECTOR('',#17169,1.);+#17169 = DIRECTION('',(0.,0.,1.));+#17170 = DEFINITIONAL_REPRESENTATION('',(#17171),#17175);+#17171 = LINE('',#17172,#17173);+#17172 = CARTESIAN_POINT('',(0.,-0.1));+#17173 = VECTOR('',#17174,1.);+#17174 = DIRECTION('',(1.,0.));+#17175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17176 = ADVANCED_FACE('',(#17177),#17163,.T.);+#17177 = FACE_BOUND('',#17178,.T.);+#17178 = EDGE_LOOP('',(#17179,#17215,#17236,#17237));+#17179 = ORIENTED_EDGE('',*,*,#17180,.T.);+#17180 = EDGE_CURVE('',#17181,#17183,#17185,.T.);+#17181 = VERTEX_POINT('',#17182);+#17182 = CARTESIAN_POINT('',(-0.887241437625,0.147734125947,2.1));+#17183 = VERTEX_POINT('',#17184);+#17184 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.1));+#17185 = SURFACE_CURVE('',#17186,(#17192,#17201),.PCURVE_S1.);+#17186 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17187,#17188,#17189,#17190,+ #17191),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17187 = CARTESIAN_POINT('',(-0.887241437625,0.147734125947,2.1));+#17188 = CARTESIAN_POINT('',(-0.869570112652,0.147734125947,2.1));+#17189 = CARTESIAN_POINT('',(-0.855202079786,0.145746200226,2.1));+#17190 = CARTESIAN_POINT('',(-0.844157631101,0.14176194538,2.1));+#17191 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.1));+#17192 = PCURVE('',#17163,#17193);+#17193 = DEFINITIONAL_REPRESENTATION('',(#17194),#17200);+#17194 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17195,#17196,#17197,#17198,+ #17199),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17195 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#17196 = CARTESIAN_POINT('',(0.750261757817,-5.00001E-02));+#17197 = CARTESIAN_POINT('',(0.50028971139,-5.00001E-02));+#17198 = CARTESIAN_POINT('',(0.250172306725,-5.00001E-02));+#17199 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17201 = PCURVE('',#17202,#17207);+#17202 = PLANE('',#17203);+#17203 = AXIS2_PLACEMENT_3D('',#17204,#17205,#17206);+#17204 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#17205 = DIRECTION('',(0.,0.,1.));+#17206 = DIRECTION('',(0.51688870171,-0.856052609391,0.));+#17207 = DEFINITIONAL_REPRESENTATION('',(#17208),#17214);+#17208 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17209,#17210,#17211,#17212,+ #17213),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17209 = CARTESIAN_POINT('',(3.916268292147,-0.683163247278));+#17210 = CARTESIAN_POINT('',(3.92540240037,-0.668035663423));+#17211 = CARTESIAN_POINT('',(3.934530843224,-0.656763407742));+#17212 = CARTESIAN_POINT('',(3.943650325724,-0.649368194941));+#17213 = CARTESIAN_POINT('',(3.952757540641,-0.645855182432));+#17214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17215 = ORIENTED_EDGE('',*,*,#17216,.T.);+#17216 = EDGE_CURVE('',#17183,#17120,#17217,.T.);+#17217 = SURFACE_CURVE('',#17218,(#17222,#17229),.PCURVE_S1.);+#17218 = LINE('',#17219,#17220);+#17219 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.1500001));+#17220 = VECTOR('',#17221,1.);+#17221 = DIRECTION('',(-0.,-0.,-1.));+#17222 = PCURVE('',#17163,#17223);+#17223 = DEFINITIONAL_REPRESENTATION('',(#17224),#17228);+#17224 = LINE('',#17225,#17226);+#17225 = CARTESIAN_POINT('',(0.,0.));+#17226 = VECTOR('',#17227,1.);+#17227 = DIRECTION('',(0.,-1.));+#17228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17229 = PCURVE('',#17135,#17230);+#17230 = DEFINITIONAL_REPRESENTATION('',(#17231),#17235);+#17231 = LINE('',#17232,#17233);+#17232 = CARTESIAN_POINT('',(1.,0.));+#17233 = VECTOR('',#17234,1.);+#17234 = DIRECTION('',(0.,-1.));+#17235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17236 = ORIENTED_EDGE('',*,*,#17149,.T.);+#17237 = ORIENTED_EDGE('',*,*,#17238,.F.);+#17238 = EDGE_CURVE('',#17181,#16974,#17239,.T.);+#17239 = SURFACE_CURVE('',#17240,(#17244,#17251),.PCURVE_S1.);+#17240 = LINE('',#17241,#17242);+#17241 = CARTESIAN_POINT('',(-0.887241437625,0.147734125947,2.1500001));+#17242 = VECTOR('',#17243,1.);+#17243 = DIRECTION('',(-0.,-0.,-1.));+#17244 = PCURVE('',#17163,#17245);+#17245 = DEFINITIONAL_REPRESENTATION('',(#17246),#17250);+#17246 = LINE('',#17247,#17248);+#17247 = CARTESIAN_POINT('',(1.,0.));+#17248 = VECTOR('',#17249,1.);+#17249 = DIRECTION('',(0.,-1.));+#17250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17251 = PCURVE('',#16991,#17252);+#17252 = DEFINITIONAL_REPRESENTATION('',(#17253),#17257);+#17253 = LINE('',#17254,#17255);+#17254 = CARTESIAN_POINT('',(0.,0.));+#17255 = VECTOR('',#17256,1.);+#17256 = DIRECTION('',(0.,-1.));+#17257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17258 = ADVANCED_FACE('',(#17259),#17202,.T.);+#17259 = FACE_BOUND('',#17260,.T.);+#17260 = EDGE_LOOP('',(#17261,#17262,#17283,#17304,#17325,#17354,#17383)+ );+#17261 = ORIENTED_EDGE('',*,*,#17180,.F.);+#17262 = ORIENTED_EDGE('',*,*,#17263,.T.);+#17263 = EDGE_CURVE('',#17181,#17264,#17266,.T.);+#17264 = VERTEX_POINT('',#17265);+#17265 = CARTESIAN_POINT('',(-0.943418653802,0.147734125947,2.1));+#17266 = SURFACE_CURVE('',#17267,(#17271,#17277),.PCURVE_S1.);+#17267 = LINE('',#17268,#17269);+#17268 = CARTESIAN_POINT('',(-1.606967013927,0.147734125947,2.1));+#17269 = VECTOR('',#17270,1.);+#17270 = DIRECTION('',(-1.,0.,0.));+#17271 = PCURVE('',#17202,#17272);+#17272 = DEFINITIONAL_REPRESENTATION('',(#17273),#17276);+#17273 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17274,#17275),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.719725576301,-0.663548360124),+ .PIECEWISE_BEZIER_KNOTS.);+#17274 = CARTESIAN_POINT('',(3.916268292147,-0.683163247278));+#17275 = CARTESIAN_POINT('',(3.887230923811,-0.731253899775));+#17276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17277 = PCURVE('',#16991,#17278);+#17278 = DEFINITIONAL_REPRESENTATION('',(#17279),#17282);+#17279 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17280,#17281),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.719725576301,-0.663548360124),+ .PIECEWISE_BEZIER_KNOTS.);+#17280 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17281 = CARTESIAN_POINT('',(5.617721617727E-02,-5.00001E-02));+#17282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17283 = ORIENTED_EDGE('',*,*,#17284,.T.);+#17284 = EDGE_CURVE('',#17264,#17285,#17287,.T.);+#17285 = VERTEX_POINT('',#17286);+#17286 = CARTESIAN_POINT('',(-0.943418653802,4.016073326715E-02,2.1));+#17287 = SURFACE_CURVE('',#17288,(#17292,#17298),.PCURVE_S1.);+#17288 = LINE('',#17289,#17290);+#17289 = CARTESIAN_POINT('',(-0.943418653802,2.000559653201,2.1));+#17290 = VECTOR('',#17291,1.);+#17291 = DIRECTION('',(0.,-1.,0.));+#17292 = PCURVE('',#17202,#17293);+#17293 = DEFINITIONAL_REPRESENTATION('',(#17294),#17297);+#17294 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17295,#17296),.UNSPECIFIED.,+ .F.,.F.,(2,2),(1.852825527254,1.960398919934),+ .PIECEWISE_BEZIER_KNOTS.);+#17295 = CARTESIAN_POINT('',(3.887230923811,-0.731253899775));+#17296 = CARTESIAN_POINT('',(3.979319407316,-0.786857371056));+#17297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17298 = PCURVE('',#17019,#17299);+#17299 = DEFINITIONAL_REPRESENTATION('',(#17300),#17303);+#17300 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17301,#17302),.UNSPECIFIED.,+ .F.,.F.,(2,2),(1.852825527254,1.960398919934),+ .PIECEWISE_BEZIER_KNOTS.);+#17301 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17302 = CARTESIAN_POINT('',(0.10757339268,-5.00001E-02));+#17303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17304 = ORIENTED_EDGE('',*,*,#17305,.T.);+#17305 = EDGE_CURVE('',#17285,#17306,#17308,.T.);+#17306 = VERTEX_POINT('',#17307);+#17307 = CARTESIAN_POINT('',(-0.887241437625,4.016073326715E-02,2.1));+#17308 = SURFACE_CURVE('',#17309,(#17313,#17319),.PCURVE_S1.);+#17309 = LINE('',#17310,#17311);+#17310 = CARTESIAN_POINT('',(-1.635055622015,4.016073326715E-02,2.1));+#17311 = VECTOR('',#17312,1.);+#17312 = DIRECTION('',(1.,0.,-0.));+#17313 = PCURVE('',#17202,#17314);+#17314 = DEFINITIONAL_REPRESENTATION('',(#17315),#17318);+#17315 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17316,#17317),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.691636968213,0.74781418439),+ .PIECEWISE_BEZIER_KNOTS.);+#17316 = CARTESIAN_POINT('',(3.979319407316,-0.786857371056));+#17317 = CARTESIAN_POINT('',(4.008356775651,-0.738766718559));+#17318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17319 = PCURVE('',#17047,#17320);+#17320 = DEFINITIONAL_REPRESENTATION('',(#17321),#17324);+#17321 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17322,#17323),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.691636968213,0.74781418439),+ .PIECEWISE_BEZIER_KNOTS.);+#17322 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17323 = CARTESIAN_POINT('',(5.617721617727E-02,-5.00001E-02));+#17324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17325 = ORIENTED_EDGE('',*,*,#17326,.F.);+#17326 = EDGE_CURVE('',#17327,#17306,#17329,.T.);+#17327 = VERTEX_POINT('',#17328);+#17328 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.1));+#17329 = SURFACE_CURVE('',#17330,(#17336,#17345),.PCURVE_S1.);+#17330 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17331,#17332,#17333,#17334,+ #17335),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17331 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.1));+#17332 = CARTESIAN_POINT('',(-0.844515664901,4.685011118402E-02,2.1));+#17333 = CARTESIAN_POINT('',(-0.855559311029,4.238754133594E-02,2.1));+#17334 = CARTESIAN_POINT('',(-0.869807619049,4.016073326715E-02,2.1));+#17335 = CARTESIAN_POINT('',(-0.887241437625,4.016073326715E-02,2.1));+#17336 = PCURVE('',#17202,#17337);+#17337 = DEFINITIONAL_REPRESENTATION('',(#17338),#17344);+#17338 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17339,#17340,#17341,#17342,+ #17343),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17339 = CARTESIAN_POINT('',(4.023030506984,-0.688565588219));+#17340 = CARTESIAN_POINT('',(4.024714785423,-0.698733545464));+#17341 = CARTESIAN_POINT('',(4.022826644077,-0.710494139484));+#17342 = CARTESIAN_POINT('',(4.017368119501,-0.723842452675));+#17343 = CARTESIAN_POINT('',(4.008356775651,-0.738766718559));+#17344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17345 = PCURVE('',#17075,#17346);+#17346 = DEFINITIONAL_REPRESENTATION('',(#17347),#17353);+#17347 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17348,#17349,#17350,#17351,+ #17352),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17348 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#17349 = CARTESIAN_POINT('',(0.749847700951,-5.00001E-02));+#17350 = CARTESIAN_POINT('',(0.499736023057,-5.00001E-02));+#17351 = CARTESIAN_POINT('',(0.249756798525,-5.00001E-02));+#17352 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17354 = ORIENTED_EDGE('',*,*,#17355,.F.);+#17355 = EDGE_CURVE('',#17356,#17327,#17358,.T.);+#17356 = VERTEX_POINT('',#17357);+#17357 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,2.1));+#17358 = SURFACE_CURVE('',#17359,(#17365,#17374),.PCURVE_S1.);+#17359 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17360,#17361,#17362,#17363,+ #17364),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17360 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,2.1));+#17361 = CARTESIAN_POINT('',(-0.821024038131,8.188485066021E-02,2.1));+#17362 = CARTESIAN_POINT('',(-0.823630351994,6.968945569687E-02,2.1));+#17363 = CARTESIAN_POINT('',(-0.828850677234,6.024307773931E-02,2.1));+#17364 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.1));+#17365 = PCURVE('',#17202,#17366);+#17366 = DEFINITIONAL_REPRESENTATION('',(#17367),#17373);+#17367 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17368,#17369,#17370,#17371,+ #17372),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17368 = CARTESIAN_POINT('',(3.994083866661,-0.652796646061));+#17369 = CARTESIAN_POINT('',(4.006865761738,-0.660514416066));+#17370 = CARTESIAN_POINT('',(4.01595848723,-0.669049219718));+#17371 = CARTESIAN_POINT('',(4.021346756594,-0.6784008188));+#17372 = CARTESIAN_POINT('',(4.023030506984,-0.688565588219));+#17373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17374 = PCURVE('',#17105,#17375);+#17375 = DEFINITIONAL_REPRESENTATION('',(#17376),#17382);+#17376 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17377,#17378,#17379,#17380,+ #17381),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17377 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#17378 = CARTESIAN_POINT('',(0.750159734824,-5.00001E-02));+#17379 = CARTESIAN_POINT('',(0.500155911016,-5.00001E-02));+#17380 = CARTESIAN_POINT('',(0.250073872104,-5.00001E-02));+#17381 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17383 = ORIENTED_EDGE('',*,*,#17384,.F.);+#17384 = EDGE_CURVE('',#17183,#17356,#17385,.T.);+#17385 = SURFACE_CURVE('',#17386,(#17395,#17407),.PCURVE_S1.);+#17386 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17387,#17388,#17389,#17390,+ #17391,#17392,#17393,#17394),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.125974363522,1.),.UNSPECIFIED.);+#17387 = CARTESIAN_POINT('',(-0.836442891082,0.13578152676,2.1));+#17388 = CARTESIAN_POINT('',(-0.835471512688,0.135028520253,2.1));+#17389 = CARTESIAN_POINT('',(-0.834540922387,0.134235657733,2.1));+#17390 = CARTESIAN_POINT('',(-0.833651126726,0.133402941159,2.1));+#17391 = CARTESIAN_POINT('',(-0.826911685031,0.126476402339,2.1));+#17392 = CARTESIAN_POINT('',(-0.822985194324,0.118504158859,2.1));+#17393 = CARTESIAN_POINT('',(-0.821024038131,0.108615092046,2.1));+#17394 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,2.1));+#17395 = PCURVE('',#17202,#17396);+#17396 = DEFINITIONAL_REPRESENTATION('',(#17397),#17406);+#17397 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17398,#17399,#17400,#17401,+ #17402,#17403,#17404,#17405),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.125974363522,1.),.UNSPECIFIED.);+#17398 = CARTESIAN_POINT('',(3.952757540641,-0.645855182432));+#17399 = CARTESIAN_POINT('',(3.953904248343,-0.645412851979));+#17400 = CARTESIAN_POINT('',(3.955063991985,-0.645026039403));+#17401 = CARTESIAN_POINT('',(3.956236766505,-0.644694749294));+#17402 = CARTESIAN_POINT('',(3.965649789404,-0.642505682303));+#17403 = CARTESIAN_POINT('',(3.974504007922,-0.64326516227));+#17404 = CARTESIAN_POINT('',(3.983983268849,-0.646697856299));+#17405 = CARTESIAN_POINT('',(3.994083866661,-0.652796646061));+#17406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17407 = PCURVE('',#17135,#17408);+#17408 = DEFINITIONAL_REPRESENTATION('',(#17409),#17418);+#17409 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17410,#17411,#17412,#17413,+ #17414,#17415,#17416,#17417),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.125974363522,1.),.UNSPECIFIED.);+#17410 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#17411 = CARTESIAN_POINT('',(0.968500302934,-5.00001E-02));+#17412 = CARTESIAN_POINT('',(0.937000300821,-5.00001E-02));+#17413 = CARTESIAN_POINT('',(0.905500148291,-5.00001E-02));+#17414 = CARTESIAN_POINT('',(0.65544809476,-5.00001E-02));+#17415 = CARTESIAN_POINT('',(0.436896370496,-5.00001E-02));+#17416 = CARTESIAN_POINT('',(0.218396579418,-5.00001E-02));+#17417 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17419 = ADVANCED_FACE('',(#17420),#17135,.T.);+#17420 = FACE_BOUND('',#17421,.T.);+#17421 = EDGE_LOOP('',(#17422,#17423,#17444,#17445));+#17422 = ORIENTED_EDGE('',*,*,#17384,.T.);+#17423 = ORIENTED_EDGE('',*,*,#17424,.T.);+#17424 = EDGE_CURVE('',#17356,#17090,#17425,.T.);+#17425 = SURFACE_CURVE('',#17426,(#17430,#17437),.PCURVE_S1.);+#17426 = LINE('',#17427,#17428);+#17427 = CARTESIAN_POINT('',(-0.821024038131,9.681605341188E-02,+ 2.1500001));+#17428 = VECTOR('',#17429,1.);+#17429 = DIRECTION('',(-0.,-0.,-1.));+#17430 = PCURVE('',#17135,#17431);+#17431 = DEFINITIONAL_REPRESENTATION('',(#17432),#17436);+#17432 = LINE('',#17433,#17434);+#17433 = CARTESIAN_POINT('',(0.,0.));+#17434 = VECTOR('',#17435,1.);+#17435 = DIRECTION('',(0.,-1.));+#17436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17437 = PCURVE('',#17105,#17438);+#17438 = DEFINITIONAL_REPRESENTATION('',(#17439),#17443);+#17439 = LINE('',#17440,#17441);+#17440 = CARTESIAN_POINT('',(1.,0.));+#17441 = VECTOR('',#17442,1.);+#17442 = DIRECTION('',(0.,-1.));+#17443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17444 = ORIENTED_EDGE('',*,*,#17119,.T.);+#17445 = ORIENTED_EDGE('',*,*,#17216,.F.);+#17446 = ADVANCED_FACE('',(#17447),#17105,.T.);+#17447 = FACE_BOUND('',#17448,.T.);+#17448 = EDGE_LOOP('',(#17449,#17450,#17471,#17472));+#17449 = ORIENTED_EDGE('',*,*,#17355,.T.);+#17450 = ORIENTED_EDGE('',*,*,#17451,.T.);+#17451 = EDGE_CURVE('',#17327,#17060,#17452,.T.);+#17452 = SURFACE_CURVE('',#17453,(#17457,#17464),.PCURVE_S1.);+#17453 = LINE('',#17454,#17455);+#17454 = CARTESIAN_POINT('',(-0.836681943066,5.35476443562E-02,2.1500001+ ));+#17455 = VECTOR('',#17456,1.);+#17456 = DIRECTION('',(-0.,-0.,-1.));+#17457 = PCURVE('',#17105,#17458);+#17458 = DEFINITIONAL_REPRESENTATION('',(#17459),#17463);+#17459 = LINE('',#17460,#17461);+#17460 = CARTESIAN_POINT('',(0.,0.));+#17461 = VECTOR('',#17462,1.);+#17462 = DIRECTION('',(0.,-1.));+#17463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17464 = PCURVE('',#17075,#17465);+#17465 = DEFINITIONAL_REPRESENTATION('',(#17466),#17470);+#17466 = LINE('',#17467,#17468);+#17467 = CARTESIAN_POINT('',(1.,0.));+#17468 = VECTOR('',#17469,1.);+#17469 = DIRECTION('',(0.,-1.));+#17470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17471 = ORIENTED_EDGE('',*,*,#17089,.T.);+#17472 = ORIENTED_EDGE('',*,*,#17424,.F.);+#17473 = ADVANCED_FACE('',(#17474),#17075,.T.);+#17474 = FACE_BOUND('',#17475,.T.);+#17475 = EDGE_LOOP('',(#17476,#17477,#17498,#17499));+#17476 = ORIENTED_EDGE('',*,*,#17326,.T.);+#17477 = ORIENTED_EDGE('',*,*,#17478,.T.);+#17478 = EDGE_CURVE('',#17306,#17032,#17479,.T.);+#17479 = SURFACE_CURVE('',#17480,(#17484,#17491),.PCURVE_S1.);+#17480 = LINE('',#17481,#17482);+#17481 = CARTESIAN_POINT('',(-0.887241437625,4.016073326715E-02,+ 2.1500001));+#17482 = VECTOR('',#17483,1.);+#17483 = DIRECTION('',(-0.,-0.,-1.));+#17484 = PCURVE('',#17075,#17485);+#17485 = DEFINITIONAL_REPRESENTATION('',(#17486),#17490);+#17486 = LINE('',#17487,#17488);+#17487 = CARTESIAN_POINT('',(0.,0.));+#17488 = VECTOR('',#17489,1.);+#17489 = DIRECTION('',(0.,-1.));+#17490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17491 = PCURVE('',#17047,#17492);+#17492 = DEFINITIONAL_REPRESENTATION('',(#17493),#17497);+#17493 = LINE('',#17494,#17495);+#17494 = CARTESIAN_POINT('',(5.617721617727E-02,0.));+#17495 = VECTOR('',#17496,1.);+#17496 = DIRECTION('',(0.,-1.));+#17497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17498 = ORIENTED_EDGE('',*,*,#17059,.T.);+#17499 = ORIENTED_EDGE('',*,*,#17451,.F.);+#17500 = ADVANCED_FACE('',(#17501),#17047,.T.);+#17501 = FACE_BOUND('',#17502,.T.);+#17502 = EDGE_LOOP('',(#17503,#17504,#17525,#17526));+#17503 = ORIENTED_EDGE('',*,*,#17305,.F.);+#17504 = ORIENTED_EDGE('',*,*,#17505,.T.);+#17505 = EDGE_CURVE('',#17285,#17004,#17506,.T.);+#17506 = SURFACE_CURVE('',#17507,(#17511,#17518),.PCURVE_S1.);+#17507 = LINE('',#17508,#17509);+#17508 = CARTESIAN_POINT('',(-0.943418653802,4.016073326715E-02,+ 2.1500001));+#17509 = VECTOR('',#17510,1.);+#17510 = DIRECTION('',(-0.,-0.,-1.));+#17511 = PCURVE('',#17047,#17512);+#17512 = DEFINITIONAL_REPRESENTATION('',(#17513),#17517);+#17513 = LINE('',#17514,#17515);+#17514 = CARTESIAN_POINT('',(0.,0.));+#17515 = VECTOR('',#17516,1.);+#17516 = DIRECTION('',(0.,-1.));+#17517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17518 = PCURVE('',#17019,#17519);+#17519 = DEFINITIONAL_REPRESENTATION('',(#17520),#17524);+#17520 = LINE('',#17521,#17522);+#17521 = CARTESIAN_POINT('',(0.10757339268,0.));+#17522 = VECTOR('',#17523,1.);+#17523 = DIRECTION('',(0.,-1.));+#17524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17525 = ORIENTED_EDGE('',*,*,#17031,.T.);+#17526 = ORIENTED_EDGE('',*,*,#17478,.F.);+#17527 = ADVANCED_FACE('',(#17528),#17019,.T.);+#17528 = FACE_BOUND('',#17529,.T.);+#17529 = EDGE_LOOP('',(#17530,#17531,#17552,#17553));+#17530 = ORIENTED_EDGE('',*,*,#17284,.F.);+#17531 = ORIENTED_EDGE('',*,*,#17532,.T.);+#17532 = EDGE_CURVE('',#17264,#16976,#17533,.T.);+#17533 = SURFACE_CURVE('',#17534,(#17538,#17545),.PCURVE_S1.);+#17534 = LINE('',#17535,#17536);+#17535 = CARTESIAN_POINT('',(-0.943418653802,0.147734125947,2.1500001));+#17536 = VECTOR('',#17537,1.);+#17537 = DIRECTION('',(-0.,-0.,-1.));+#17538 = PCURVE('',#17019,#17539);+#17539 = DEFINITIONAL_REPRESENTATION('',(#17540),#17544);+#17540 = LINE('',#17541,#17542);+#17541 = CARTESIAN_POINT('',(0.,0.));+#17542 = VECTOR('',#17543,1.);+#17543 = DIRECTION('',(0.,-1.));+#17544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17545 = PCURVE('',#16991,#17546);+#17546 = DEFINITIONAL_REPRESENTATION('',(#17547),#17551);+#17547 = LINE('',#17548,#17549);+#17548 = CARTESIAN_POINT('',(5.617721617727E-02,0.));+#17549 = VECTOR('',#17550,1.);+#17550 = DIRECTION('',(0.,-1.));+#17551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17552 = ORIENTED_EDGE('',*,*,#17003,.T.);+#17553 = ORIENTED_EDGE('',*,*,#17505,.F.);+#17554 = ADVANCED_FACE('',(#17555),#16991,.T.);+#17555 = FACE_BOUND('',#17556,.T.);+#17556 = EDGE_LOOP('',(#17557,#17558,#17559,#17560));+#17557 = ORIENTED_EDGE('',*,*,#17263,.F.);+#17558 = ORIENTED_EDGE('',*,*,#17238,.T.);+#17559 = ORIENTED_EDGE('',*,*,#16973,.T.);+#17560 = ORIENTED_EDGE('',*,*,#17532,.F.);+#17561 = ADVANCED_FACE('',(#17562),#16957,.T.);+#17562 = FACE_BOUND('',#17563,.T.);+#17563 = EDGE_LOOP('',(#17564,#17600,#17621,#17622));+#17564 = ORIENTED_EDGE('',*,*,#17565,.T.);+#17565 = EDGE_CURVE('',#17566,#17568,#17570,.T.);+#17566 = VERTEX_POINT('',#17567);+#17567 = CARTESIAN_POINT('',(-0.88628522969,9.562079349322E-04,2.1));+#17568 = VERTEX_POINT('',#17569);+#17569 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,2.1));+#17570 = SURFACE_CURVE('',#17571,(#17577,#17586),.PCURVE_S1.);+#17571 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17572,#17573,#17574,#17575,+ #17576),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17572 = CARTESIAN_POINT('',(-0.88628522969,9.562079349315E-04,2.1));+#17573 = CARTESIAN_POINT('',(-0.866229390736,9.562079349319E-04,2.1));+#17574 = CARTESIAN_POINT('',(-0.849688135826,-1.766295950446E-03,2.1));+#17575 = CARTESIAN_POINT('',(-0.836688982018,-7.225219112416E-03,2.1));+#17576 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,2.1));+#17577 = PCURVE('',#16957,#17578);+#17578 = DEFINITIONAL_REPRESENTATION('',(#17579),#17585);+#17579 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17580,#17581,#17582,#17583,+ #17584),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17580 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#17581 = CARTESIAN_POINT('',(0.750305368912,-5.00001E-02));+#17582 = CARTESIAN_POINT('',(0.500328325438,-5.00001E-02));+#17583 = CARTESIAN_POINT('',(0.250186362529,-5.00001E-02));+#17584 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17586 = PCURVE('',#17587,#17592);+#17587 = PLANE('',#17588);+#17588 = AXIS2_PLACEMENT_3D('',#17589,#17590,#17591);+#17589 = CARTESIAN_POINT('',(-2.326692590228,3.853385180455,2.1));+#17590 = DIRECTION('',(0.,0.,1.));+#17591 = DIRECTION('',(0.51688870171,-0.856052609391,0.));+#17592 = DEFINITIONAL_REPRESENTATION('',(#17593),#17599);+#17593 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17594,#17595,#17596,#17597,+ #17598),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17594 = CARTESIAN_POINT('',(4.04241216494,-0.758212530461));+#17595 = CARTESIAN_POINT('',(4.052778801499,-0.741043677191));+#17596 = CARTESIAN_POINT('',(4.063659395829,-0.728290724261));+#17597 = CARTESIAN_POINT('',(4.075051636981,-0.71998442043));+#17598 = CARTESIAN_POINT('',(4.08695020611,-0.716130269033));+#17599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17600 = ORIENTED_EDGE('',*,*,#17601,.T.);+#17601 = EDGE_CURVE('',#17568,#16914,#17602,.T.);+#17602 = SURFACE_CURVE('',#17603,(#17607,#17614),.PCURVE_S1.);+#17603 = LINE('',#17604,#17605);+#17604 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,+ 2.1500001));+#17605 = VECTOR('',#17606,1.);+#17606 = DIRECTION('',(-0.,-0.,-1.));+#17607 = PCURVE('',#16957,#17608);+#17608 = DEFINITIONAL_REPRESENTATION('',(#17609),#17613);+#17609 = LINE('',#17610,#17611);+#17610 = CARTESIAN_POINT('',(0.,0.));+#17611 = VECTOR('',#17612,1.);+#17612 = DIRECTION('',(0.,-1.));+#17613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17614 = PCURVE('',#16929,#17615);+#17615 = DEFINITIONAL_REPRESENTATION('',(#17616),#17620);+#17616 = LINE('',#17617,#17618);+#17617 = CARTESIAN_POINT('',(1.,0.));+#17618 = VECTOR('',#17619,1.);+#17619 = DIRECTION('',(0.,-1.));+#17620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17621 = ORIENTED_EDGE('',*,*,#16943,.T.);+#17622 = ORIENTED_EDGE('',*,*,#17623,.F.);+#17623 = EDGE_CURVE('',#17566,#16768,#17624,.T.);+#17624 = SURFACE_CURVE('',#17625,(#17629,#17636),.PCURVE_S1.);+#17625 = LINE('',#17626,#17627);+#17626 = CARTESIAN_POINT('',(-0.88628522969,9.562079349322E-04,2.1500001+ ));+#17627 = VECTOR('',#17628,1.);+#17628 = DIRECTION('',(-0.,-0.,-1.));+#17629 = PCURVE('',#16957,#17630);+#17630 = DEFINITIONAL_REPRESENTATION('',(#17631),#17635);+#17631 = LINE('',#17632,#17633);+#17632 = CARTESIAN_POINT('',(1.,0.));+#17633 = VECTOR('',#17634,1.);+#17634 = DIRECTION('',(0.,-1.));+#17635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17636 = PCURVE('',#16785,#17637);+#17637 = DEFINITIONAL_REPRESENTATION('',(#17638),#17642);+#17638 = LINE('',#17639,#17640);+#17639 = CARTESIAN_POINT('',(0.,0.));+#17640 = VECTOR('',#17641,1.);+#17641 = DIRECTION('',(0.,-1.));+#17642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17643 = ADVANCED_FACE('',(#17644),#17587,.T.);+#17644 = FACE_BOUND('',#17645,.T.);+#17645 = EDGE_LOOP('',(#17646,#17647,#17668,#17689,#17710,#17739,#17768)+ );+#17646 = ORIENTED_EDGE('',*,*,#17565,.F.);+#17647 = ORIENTED_EDGE('',*,*,#17648,.T.);+#17648 = EDGE_CURVE('',#17566,#17649,#17651,.T.);+#17649 = VERTEX_POINT('',#17650);+#17650 = CARTESIAN_POINT('',(-0.943418653802,9.562079349322E-04,2.1));+#17651 = SURFACE_CURVE('',#17652,(#17656,#17662),.PCURVE_S1.);+#17652 = LINE('',#17653,#17654);+#17653 = CARTESIAN_POINT('',(-1.606488909959,9.562079349323E-04,2.1));+#17654 = VECTOR('',#17655,1.);+#17655 = DIRECTION('',(-1.,0.,0.));+#17656 = PCURVE('',#17587,#17657);+#17657 = DEFINITIONAL_REPRESENTATION('',(#17658),#17661);+#17658 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17659,#17660),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.720203680269,-0.663070256157),+ .PIECEWISE_BEZIER_KNOTS.);+#17659 = CARTESIAN_POINT('',(4.04241216494,-0.758212530461));+#17660 = CARTESIAN_POINT('',(4.012880543526,-0.807121747256));+#17661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17662 = PCURVE('',#16785,#17663);+#17663 = DEFINITIONAL_REPRESENTATION('',(#17664),#17667);+#17664 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17665,#17666),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.720203680269,-0.663070256157),+ .PIECEWISE_BEZIER_KNOTS.);+#17665 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17666 = CARTESIAN_POINT('',(5.71334241122E-02,-5.00001E-02));+#17667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17668 = ORIENTED_EDGE('',*,*,#17669,.T.);+#17669 = EDGE_CURVE('',#17649,#17670,#17672,.T.);+#17670 = VERTEX_POINT('',#17671);+#17671 = CARTESIAN_POINT('',(-0.943418653802,-0.129805227167,2.1));+#17672 = SURFACE_CURVE('',#17673,(#17677,#17683),.PCURVE_S1.);+#17673 = LINE('',#17674,#17675);+#17674 = CARTESIAN_POINT('',(-0.943418653802,1.927170694195,2.1));+#17675 = VECTOR('',#17676,1.);+#17676 = DIRECTION('',(0.,-1.,0.));+#17677 = PCURVE('',#17587,#17678);+#17678 = DEFINITIONAL_REPRESENTATION('',(#17679),#17682);+#17679 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17680,#17681),.UNSPECIFIED.,+ .F.,.F.,(2,2),(1.92621448626,2.056975921362),+ .PIECEWISE_BEZIER_KNOTS.);+#17680 = CARTESIAN_POINT('',(4.012880543526,-0.807121747256));+#17681 = CARTESIAN_POINT('',(4.124819211253,-0.87471085568));+#17682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17683 = PCURVE('',#16813,#17684);+#17684 = DEFINITIONAL_REPRESENTATION('',(#17685),#17688);+#17685 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17686,#17687),.UNSPECIFIED.,+ .F.,.F.,(2,2),(1.92621448626,2.056975921362),+ .PIECEWISE_BEZIER_KNOTS.);+#17686 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17687 = CARTESIAN_POINT('',(0.130761435102,-5.00001E-02));+#17688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17689 = ORIENTED_EDGE('',*,*,#17690,.T.);+#17690 = EDGE_CURVE('',#17670,#17691,#17693,.T.);+#17691 = VERTEX_POINT('',#17692);+#17692 = CARTESIAN_POINT('',(-0.88628522969,-0.129805227167,2.1));+#17693 = SURFACE_CURVE('',#17694,(#17698,#17704),.PCURVE_S1.);+#17694 = LINE('',#17695,#17696);+#17695 = CARTESIAN_POINT('',(-1.635055622015,-0.129805227167,2.1));+#17696 = VECTOR('',#17697,1.);+#17697 = DIRECTION('',(1.,0.,-0.));+#17698 = PCURVE('',#17587,#17699);+#17699 = DEFINITIONAL_REPRESENTATION('',(#17700),#17703);+#17700 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17701,#17702),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.691636968213,0.748770392325),+ .PIECEWISE_BEZIER_KNOTS.);+#17701 = CARTESIAN_POINT('',(4.124819211253,-0.87471085568));+#17702 = CARTESIAN_POINT('',(4.154350832667,-0.825801638885));+#17703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17704 = PCURVE('',#16841,#17705);+#17705 = DEFINITIONAL_REPRESENTATION('',(#17706),#17709);+#17706 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17707,#17708),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.691636968213,0.748770392325),+ .PIECEWISE_BEZIER_KNOTS.);+#17707 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17708 = CARTESIAN_POINT('',(5.71334241122E-02,-5.00001E-02));+#17709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17710 = ORIENTED_EDGE('',*,*,#17711,.F.);+#17711 = EDGE_CURVE('',#17712,#17691,#17714,.T.);+#17712 = VERTEX_POINT('',#17713);+#17713 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.1));+#17714 = SURFACE_CURVE('',#17715,(#17721,#17730),.PCURVE_S1.);+#17715 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17716,#17717,#17718,#17719,+ #17720),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17716 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.1));+#17717 = CARTESIAN_POINT('',(-0.835256266826,-0.122461459911,2.1));+#17718 = CARTESIAN_POINT('',(-0.848258583722,-0.127362252104,2.1));+#17719 = CARTESIAN_POINT('',(-0.865279996472,-0.129805227167,2.1));+#17720 = CARTESIAN_POINT('',(-0.88628522969,-0.129805227167,2.1));+#17721 = PCURVE('',#17587,#17722);+#17722 = DEFINITIONAL_REPRESENTATION('',(#17723),#17729);+#17723 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17724,#17725,#17726,#17727,+ #17728),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17724 = CARTESIAN_POINT('',(4.172779787235,-0.766837588122));+#17725 = CARTESIAN_POINT('',(4.174440475909,-0.778322251748));+#17726 = CARTESIAN_POINT('',(4.171915061155,-0.791986083169));+#17727 = CARTESIAN_POINT('',(4.165208200394,-0.807820054178));+#17728 = CARTESIAN_POINT('',(4.154350832667,-0.825801638885));+#17729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17730 = PCURVE('',#16869,#17731);+#17731 = DEFINITIONAL_REPRESENTATION('',(#17732),#17738);+#17732 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17733,#17734,#17735,#17736,+ #17737),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17733 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#17734 = CARTESIAN_POINT('',(0.749759169175,-5.00001E-02));+#17735 = CARTESIAN_POINT('',(0.499590441615,-5.00001E-02));+#17736 = CARTESIAN_POINT('',(0.249627537384,-5.00001E-02));+#17737 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17739 = ORIENTED_EDGE('',*,*,#17740,.F.);+#17740 = EDGE_CURVE('',#17741,#17712,#17743,.T.);+#17741 = VERTEX_POINT('',#17742);+#17742 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,2.1));+#17743 = SURFACE_CURVE('',#17744,(#17750,#17759),.PCURVE_S1.);+#17744 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17745,#17746,#17747,#17748,+ #17749),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17745 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,2.1));+#17746 = CARTESIAN_POINT('',(-0.808354282993,-8.353480140447E-02,2.1));+#17747 = CARTESIAN_POINT('',(-0.811337511221,-9.722619003145E-02,2.1));+#17748 = CARTESIAN_POINT('',(-0.817315415555,-0.107749961868,2.1));+#17749 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.1));+#17750 = PCURVE('',#17587,#17751);+#17751 = DEFINITIONAL_REPRESENTATION('',(#17752),#17758);+#17752 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17753,#17754,#17755,#17756,+ #17757),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17753 = CARTESIAN_POINT('',(4.140607214872,-0.726467945461));+#17754 = CARTESIAN_POINT('',(4.155022539816,-0.735171988313));+#17755 = CARTESIAN_POINT('',(4.165201091811,-0.744802712714));+#17756 = CARTESIAN_POINT('',(4.171120082943,-0.755359732079));+#17757 = CARTESIAN_POINT('',(4.172779787235,-0.766837588122));+#17758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17759 = PCURVE('',#16899,#17760);+#17760 = DEFINITIONAL_REPRESENTATION('',(#17761),#17767);+#17761 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17762,#17763,#17764,#17765,+ #17766),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17762 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#17763 = CARTESIAN_POINT('',(0.750205701872,-5.00001E-02));+#17764 = CARTESIAN_POINT('',(0.500199090419,-5.00001E-02));+#17765 = CARTESIAN_POINT('',(0.250092499503,-5.00001E-02));+#17766 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17768 = ORIENTED_EDGE('',*,*,#17769,.F.);+#17769 = EDGE_CURVE('',#17568,#17741,#17770,.T.);+#17770 = SURFACE_CURVE('',#17771,(#17777,#17786),.PCURVE_S1.);+#17771 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17772,#17773,#17774,#17775,+ #17776),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17772 = CARTESIAN_POINT('',(-0.827239389708,-1.541885295078E-02,2.1));+#17773 = CARTESIAN_POINT('',(-0.817793446988,-2.360932227123E-02,2.1));+#17774 = CARTESIAN_POINT('',(-0.811496614836,-3.489035332637E-02,2.1));+#17775 = CARTESIAN_POINT('',(-0.808354282993,-4.925907225072E-02,2.1));+#17776 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,2.1));+#17777 = PCURVE('',#17587,#17778);+#17778 = DEFINITIONAL_REPRESENTATION('',(#17779),#17785);+#17779 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17780,#17781,#17782,#17783,+ #17784),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17780 = CARTESIAN_POINT('',(4.08695020611,-0.716130269033));+#17781 = CARTESIAN_POINT('',(4.098844179813,-0.712277606173));+#17782 = CARTESIAN_POINT('',(4.11175609728,-0.712718224073));+#17783 = CARTESIAN_POINT('',(4.125680712435,-0.71745525117));+#17784 = CARTESIAN_POINT('',(4.140607214872,-0.726467945461));+#17785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17786 = PCURVE('',#16929,#17787);+#17787 = DEFINITIONAL_REPRESENTATION('',(#17788),#17794);+#17788 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#17789,#17790,#17791,#17792,+ #17793),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#17789 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#17790 = CARTESIAN_POINT('',(0.749910263613,-5.00001E-02));+#17791 = CARTESIAN_POINT('',(0.499802699872,-5.00001E-02));+#17792 = CARTESIAN_POINT('',(0.249794227113,-5.00001E-02));+#17793 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#17794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17795 = ADVANCED_FACE('',(#17796),#16929,.T.);+#17796 = FACE_BOUND('',#17797,.T.);+#17797 = EDGE_LOOP('',(#17798,#17799,#17820,#17821));+#17798 = ORIENTED_EDGE('',*,*,#17769,.T.);+#17799 = ORIENTED_EDGE('',*,*,#17800,.T.);+#17800 = EDGE_CURVE('',#17741,#16884,#17801,.T.);+#17801 = SURFACE_CURVE('',#17802,(#17806,#17813),.PCURVE_S1.);+#17802 = LINE('',#17803,#17804);+#17803 = CARTESIAN_POINT('',(-0.808354282993,-6.669550346152E-02,+ 2.1500001));+#17804 = VECTOR('',#17805,1.);+#17805 = DIRECTION('',(-0.,-0.,-1.));+#17806 = PCURVE('',#16929,#17807);+#17807 = DEFINITIONAL_REPRESENTATION('',(#17808),#17812);+#17808 = LINE('',#17809,#17810);+#17809 = CARTESIAN_POINT('',(0.,0.));+#17810 = VECTOR('',#17811,1.);+#17811 = DIRECTION('',(0.,-1.));+#17812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17813 = PCURVE('',#16899,#17814);+#17814 = DEFINITIONAL_REPRESENTATION('',(#17815),#17819);+#17815 = LINE('',#17816,#17817);+#17816 = CARTESIAN_POINT('',(1.,0.));+#17817 = VECTOR('',#17818,1.);+#17818 = DIRECTION('',(0.,-1.));+#17819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17820 = ORIENTED_EDGE('',*,*,#16913,.T.);+#17821 = ORIENTED_EDGE('',*,*,#17601,.F.);+#17822 = ADVANCED_FACE('',(#17823),#16899,.T.);+#17823 = FACE_BOUND('',#17824,.T.);+#17824 = EDGE_LOOP('',(#17825,#17826,#17847,#17848));+#17825 = ORIENTED_EDGE('',*,*,#17740,.T.);+#17826 = ORIENTED_EDGE('',*,*,#17827,.T.);+#17827 = EDGE_CURVE('',#17712,#16854,#17828,.T.);+#17828 = SURFACE_CURVE('',#17829,(#17833,#17840),.PCURVE_S1.);+#17829 = LINE('',#17830,#17831);+#17830 = CARTESIAN_POINT('',(-0.826283181773,-0.115103530167,2.1500001)+ );+#17831 = VECTOR('',#17832,1.);+#17832 = DIRECTION('',(-0.,-0.,-1.));+#17833 = PCURVE('',#16899,#17834);+#17834 = DEFINITIONAL_REPRESENTATION('',(#17835),#17839);+#17835 = LINE('',#17836,#17837);+#17836 = CARTESIAN_POINT('',(0.,0.));+#17837 = VECTOR('',#17838,1.);+#17838 = DIRECTION('',(0.,-1.));+#17839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17840 = PCURVE('',#16869,#17841);+#17841 = DEFINITIONAL_REPRESENTATION('',(#17842),#17846);+#17842 = LINE('',#17843,#17844);+#17843 = CARTESIAN_POINT('',(1.,0.));+#17844 = VECTOR('',#17845,1.);+#17845 = DIRECTION('',(0.,-1.));+#17846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17847 = ORIENTED_EDGE('',*,*,#16883,.T.);+#17848 = ORIENTED_EDGE('',*,*,#17800,.F.);+#17849 = ADVANCED_FACE('',(#17850),#16869,.T.);+#17850 = FACE_BOUND('',#17851,.T.);+#17851 = EDGE_LOOP('',(#17852,#17853,#17874,#17875));+#17852 = ORIENTED_EDGE('',*,*,#17711,.T.);+#17853 = ORIENTED_EDGE('',*,*,#17854,.T.);+#17854 = EDGE_CURVE('',#17691,#16826,#17855,.T.);+#17855 = SURFACE_CURVE('',#17856,(#17860,#17867),.PCURVE_S1.);+#17856 = LINE('',#17857,#17858);+#17857 = CARTESIAN_POINT('',(-0.88628522969,-0.129805227167,2.1500001));+#17858 = VECTOR('',#17859,1.);+#17859 = DIRECTION('',(-0.,-0.,-1.));+#17860 = PCURVE('',#16869,#17861);+#17861 = DEFINITIONAL_REPRESENTATION('',(#17862),#17866);+#17862 = LINE('',#17863,#17864);+#17863 = CARTESIAN_POINT('',(0.,0.));+#17864 = VECTOR('',#17865,1.);+#17865 = DIRECTION('',(0.,-1.));+#17866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17867 = PCURVE('',#16841,#17868);+#17868 = DEFINITIONAL_REPRESENTATION('',(#17869),#17873);+#17869 = LINE('',#17870,#17871);+#17870 = CARTESIAN_POINT('',(5.71334241122E-02,0.));+#17871 = VECTOR('',#17872,1.);+#17872 = DIRECTION('',(0.,-1.));+#17873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17874 = ORIENTED_EDGE('',*,*,#16853,.T.);+#17875 = ORIENTED_EDGE('',*,*,#17827,.F.);+#17876 = ADVANCED_FACE('',(#17877),#16841,.T.);+#17877 = FACE_BOUND('',#17878,.T.);+#17878 = EDGE_LOOP('',(#17879,#17880,#17901,#17902));+#17879 = ORIENTED_EDGE('',*,*,#17690,.F.);+#17880 = ORIENTED_EDGE('',*,*,#17881,.T.);+#17881 = EDGE_CURVE('',#17670,#16798,#17882,.T.);+#17882 = SURFACE_CURVE('',#17883,(#17887,#17894),.PCURVE_S1.);+#17883 = LINE('',#17884,#17885);+#17884 = CARTESIAN_POINT('',(-0.943418653802,-0.129805227167,2.1500001)+ );+#17885 = VECTOR('',#17886,1.);+#17886 = DIRECTION('',(-0.,-0.,-1.));+#17887 = PCURVE('',#16841,#17888);+#17888 = DEFINITIONAL_REPRESENTATION('',(#17889),#17893);+#17889 = LINE('',#17890,#17891);+#17890 = CARTESIAN_POINT('',(0.,0.));+#17891 = VECTOR('',#17892,1.);+#17892 = DIRECTION('',(0.,-1.));+#17893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17894 = PCURVE('',#16813,#17895);+#17895 = DEFINITIONAL_REPRESENTATION('',(#17896),#17900);+#17896 = LINE('',#17897,#17898);+#17897 = CARTESIAN_POINT('',(0.130761435102,0.));+#17898 = VECTOR('',#17899,1.);+#17899 = DIRECTION('',(0.,-1.));+#17900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17901 = ORIENTED_EDGE('',*,*,#16825,.T.);+#17902 = ORIENTED_EDGE('',*,*,#17854,.F.);+#17903 = ADVANCED_FACE('',(#17904),#16813,.T.);+#17904 = FACE_BOUND('',#17905,.T.);+#17905 = EDGE_LOOP('',(#17906,#17907,#17928,#17929));+#17906 = ORIENTED_EDGE('',*,*,#17669,.F.);+#17907 = ORIENTED_EDGE('',*,*,#17908,.T.);+#17908 = EDGE_CURVE('',#17649,#16770,#17909,.T.);+#17909 = SURFACE_CURVE('',#17910,(#17914,#17921),.PCURVE_S1.);+#17910 = LINE('',#17911,#17912);+#17911 = CARTESIAN_POINT('',(-0.943418653802,9.562079349322E-04,+ 2.1500001));+#17912 = VECTOR('',#17913,1.);+#17913 = DIRECTION('',(-0.,-0.,-1.));+#17914 = PCURVE('',#16813,#17915);+#17915 = DEFINITIONAL_REPRESENTATION('',(#17916),#17920);+#17916 = LINE('',#17917,#17918);+#17917 = CARTESIAN_POINT('',(0.,0.));+#17918 = VECTOR('',#17919,1.);+#17919 = DIRECTION('',(0.,-1.));+#17920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17921 = PCURVE('',#16785,#17922);+#17922 = DEFINITIONAL_REPRESENTATION('',(#17923),#17927);+#17923 = LINE('',#17924,#17925);+#17924 = CARTESIAN_POINT('',(5.71334241122E-02,0.));+#17925 = VECTOR('',#17926,1.);+#17926 = DIRECTION('',(0.,-1.));+#17927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17928 = ORIENTED_EDGE('',*,*,#16797,.T.);+#17929 = ORIENTED_EDGE('',*,*,#17881,.F.);+#17930 = ADVANCED_FACE('',(#17931),#16785,.T.);+#17931 = FACE_BOUND('',#17932,.T.);+#17932 = EDGE_LOOP('',(#17933,#17934,#17935,#17936));+#17933 = ORIENTED_EDGE('',*,*,#17648,.F.);+#17934 = ORIENTED_EDGE('',*,*,#17623,.T.);+#17935 = ORIENTED_EDGE('',*,*,#16767,.T.);+#17936 = ORIENTED_EDGE('',*,*,#17908,.F.);+#17937 = ADVANCED_FACE('',(#17938),#5797,.T.);+#17938 = FACE_BOUND('',#17939,.T.);+#17939 = EDGE_LOOP('',(#17940,#17941,#17962,#17963));+#17940 = ORIENTED_EDGE('',*,*,#5771,.T.);+#17941 = ORIENTED_EDGE('',*,*,#17942,.T.);+#17942 = EDGE_CURVE('',#5736,#16700,#17943,.T.);+#17943 = SURFACE_CURVE('',#17944,(#17948,#17955),.PCURVE_S1.);+#17944 = LINE('',#17945,#17946);+#17945 = CARTESIAN_POINT('',(-0.759826730295,-7.147654313618E-02,+ 2.1500001));+#17946 = VECTOR('',#17947,1.);+#17947 = DIRECTION('',(-0.,-0.,-1.));+#17948 = PCURVE('',#5797,#17949);+#17949 = DEFINITIONAL_REPRESENTATION('',(#17950),#17954);+#17950 = LINE('',#17951,#17952);+#17951 = CARTESIAN_POINT('',(0.,0.));+#17952 = VECTOR('',#17953,1.);+#17953 = DIRECTION('',(0.,-1.));+#17954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17955 = PCURVE('',#5755,#17956);+#17956 = DEFINITIONAL_REPRESENTATION('',(#17957),#17961);+#17957 = LINE('',#17958,#17959);+#17958 = CARTESIAN_POINT('',(1.,0.));+#17959 = VECTOR('',#17960,1.);+#17960 = DIRECTION('',(0.,-1.));+#17961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17962 = ORIENTED_EDGE('',*,*,#16722,.T.);+#17963 = ORIENTED_EDGE('',*,*,#16461,.F.);+#17964 = ADVANCED_FACE('',(#17965),#5755,.T.);+#17965 = FACE_BOUND('',#17966,.T.);+#17966 = EDGE_LOOP('',(#17967,#17968,#17989,#17990));+#17967 = ORIENTED_EDGE('',*,*,#5735,.T.);+#17968 = ORIENTED_EDGE('',*,*,#17969,.T.);+#17969 = EDGE_CURVE('',#5691,#16677,#17970,.T.);+#17970 = SURFACE_CURVE('',#17971,(#17975,#17982),.PCURVE_S1.);+#17971 = LINE('',#17972,#17973);+#17972 = CARTESIAN_POINT('',(-0.779787570937,-8.486345422523E-03,+ 2.1500001));+#17973 = VECTOR('',#17974,1.);+#17974 = DIRECTION('',(-0.,-0.,-1.));+#17975 = PCURVE('',#5755,#17976);+#17976 = DEFINITIONAL_REPRESENTATION('',(#17977),#17981);+#17977 = LINE('',#17978,#17979);+#17978 = CARTESIAN_POINT('',(0.,0.));+#17979 = VECTOR('',#17980,1.);+#17980 = DIRECTION('',(0.,-1.));+#17981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17982 = PCURVE('',#5716,#17983);+#17983 = DEFINITIONAL_REPRESENTATION('',(#17984),#17988);+#17984 = LINE('',#17985,#17986);+#17985 = CARTESIAN_POINT('',(1.,0.));+#17986 = VECTOR('',#17987,1.);+#17987 = DIRECTION('',(0.,-1.));+#17988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17989 = ORIENTED_EDGE('',*,*,#16699,.T.);+#17990 = ORIENTED_EDGE('',*,*,#17942,.F.);+#17991 = ADVANCED_FACE('',(#17992),#5716,.T.);+#17992 = FACE_BOUND('',#17993,.T.);+#17993 = EDGE_LOOP('',(#17994,#17995,#18016,#18017));+#17994 = ORIENTED_EDGE('',*,*,#5690,.T.);+#17995 = ORIENTED_EDGE('',*,*,#17996,.T.);+#17996 = EDGE_CURVE('',#5655,#16654,#17997,.T.);+#17997 = SURFACE_CURVE('',#17998,(#18002,#18009),.PCURVE_S1.);+#17998 = LINE('',#17999,#18000);+#17999 = CARTESIAN_POINT('',(-0.834889053188,2.151467853597E-02,+ 2.1500001));+#18000 = VECTOR('',#18001,1.);+#18001 = DIRECTION('',(-0.,-0.,-1.));+#18002 = PCURVE('',#5716,#18003);+#18003 = DEFINITIONAL_REPRESENTATION('',(#18004),#18008);+#18004 = LINE('',#18005,#18006);+#18005 = CARTESIAN_POINT('',(0.,0.));+#18006 = VECTOR('',#18007,1.);+#18007 = DIRECTION('',(0.,-1.));+#18008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18009 = PCURVE('',#5674,#18010);+#18010 = DEFINITIONAL_REPRESENTATION('',(#18011),#18015);+#18011 = LINE('',#18012,#18013);+#18012 = CARTESIAN_POINT('',(1.,0.));+#18013 = VECTOR('',#18014,1.);+#18014 = DIRECTION('',(0.,-1.));+#18015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18016 = ORIENTED_EDGE('',*,*,#16676,.T.);+#18017 = ORIENTED_EDGE('',*,*,#17969,.F.);+#18018 = ADVANCED_FACE('',(#18019),#5674,.T.);+#18019 = FACE_BOUND('',#18020,.T.);+#18020 = EDGE_LOOP('',(#18021,#18022,#18043,#18044));+#18021 = ORIENTED_EDGE('',*,*,#5654,.T.);+#18022 = ORIENTED_EDGE('',*,*,#18023,.T.);+#18023 = EDGE_CURVE('',#5619,#16631,#18024,.T.);+#18024 = SURFACE_CURVE('',#18025,(#18029,#18036),.PCURVE_S1.);+#18025 = LINE('',#18026,#18027);+#18026 = CARTESIAN_POINT('',(-0.787915338384,4.518082492555E-02,+ 2.1500001));+#18027 = VECTOR('',#18028,1.);+#18028 = DIRECTION('',(-0.,-0.,-1.));+#18029 = PCURVE('',#5674,#18030);+#18030 = DEFINITIONAL_REPRESENTATION('',(#18031),#18035);+#18031 = LINE('',#18032,#18033);+#18032 = CARTESIAN_POINT('',(0.,0.));+#18033 = VECTOR('',#18034,1.);+#18034 = DIRECTION('',(0.,-1.));+#18035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18036 = PCURVE('',#5638,#18037);+#18037 = DEFINITIONAL_REPRESENTATION('',(#18038),#18042);+#18038 = LINE('',#18039,#18040);+#18039 = CARTESIAN_POINT('',(1.,0.));+#18040 = VECTOR('',#18041,1.);+#18041 = DIRECTION('',(0.,-1.));+#18042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18043 = ORIENTED_EDGE('',*,*,#16653,.T.);+#18044 = ORIENTED_EDGE('',*,*,#17996,.F.);+#18045 = ADVANCED_FACE('',(#18046),#5638,.T.);+#18046 = FACE_BOUND('',#18047,.T.);+#18047 = EDGE_LOOP('',(#18048,#18049,#18070,#18071));+#18048 = ORIENTED_EDGE('',*,*,#5618,.T.);+#18049 = ORIENTED_EDGE('',*,*,#18050,.T.);+#18050 = EDGE_CURVE('',#5574,#16608,#18051,.T.);+#18051 = SURFACE_CURVE('',#18052,(#18056,#18063),.PCURVE_S1.);+#18052 = LINE('',#18053,#18054);+#18053 = CARTESIAN_POINT('',(-0.77225743345,9.681605341188E-02,2.1500001+ ));+#18054 = VECTOR('',#18055,1.);+#18055 = DIRECTION('',(-0.,-0.,-1.));+#18056 = PCURVE('',#5638,#18057);+#18057 = DEFINITIONAL_REPRESENTATION('',(#18058),#18062);+#18058 = LINE('',#18059,#18060);+#18059 = CARTESIAN_POINT('',(0.,0.));+#18060 = VECTOR('',#18061,1.);+#18061 = DIRECTION('',(0.,-1.));+#18062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18063 = PCURVE('',#5599,#18064);+#18064 = DEFINITIONAL_REPRESENTATION('',(#18065),#18069);+#18065 = LINE('',#18066,#18067);+#18066 = CARTESIAN_POINT('',(1.,0.));+#18067 = VECTOR('',#18068,1.);+#18068 = DIRECTION('',(0.,-1.));+#18069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18070 = ORIENTED_EDGE('',*,*,#16630,.T.);+#18071 = ORIENTED_EDGE('',*,*,#18023,.F.);+#18072 = ADVANCED_FACE('',(#18073),#5599,.T.);+#18073 = FACE_BOUND('',#18074,.T.);+#18074 = EDGE_LOOP('',(#18075,#18076,#18097,#18098));+#18075 = ORIENTED_EDGE('',*,*,#5573,.T.);+#18076 = ORIENTED_EDGE('',*,*,#18077,.T.);+#18077 = EDGE_CURVE('',#5538,#16585,#18078,.T.);+#18078 = SURFACE_CURVE('',#18079,(#18083,#18090),.PCURVE_S1.);+#18079 = LINE('',#18080,#18081);+#18080 = CARTESIAN_POINT('',(-0.801899879433,0.163750608857,2.1500001));+#18081 = VECTOR('',#18082,1.);+#18082 = DIRECTION('',(-0.,-0.,-1.));+#18083 = PCURVE('',#5599,#18084);+#18084 = DEFINITIONAL_REPRESENTATION('',(#18085),#18089);+#18085 = LINE('',#18086,#18087);+#18086 = CARTESIAN_POINT('',(0.,0.));+#18087 = VECTOR('',#18088,1.);+#18088 = DIRECTION('',(0.,-1.));+#18089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18090 = PCURVE('',#5557,#18091);+#18091 = DEFINITIONAL_REPRESENTATION('',(#18092),#18096);+#18092 = LINE('',#18093,#18094);+#18093 = CARTESIAN_POINT('',(1.,0.));+#18094 = VECTOR('',#18095,1.);+#18095 = DIRECTION('',(0.,-1.));+#18096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18097 = ORIENTED_EDGE('',*,*,#16607,.T.);+#18098 = ORIENTED_EDGE('',*,*,#18050,.F.);+#18099 = ADVANCED_FACE('',(#18100),#5557,.T.);+#18100 = FACE_BOUND('',#18101,.T.);+#18101 = EDGE_LOOP('',(#18102,#18103,#18124,#18125));+#18102 = ORIENTED_EDGE('',*,*,#5537,.T.);+#18103 = ORIENTED_EDGE('',*,*,#18104,.T.);+#18104 = EDGE_CURVE('',#5511,#16562,#18105,.T.);+#18105 = SURFACE_CURVE('',#18106,(#18110,#18117),.PCURVE_S1.);+#18106 = LINE('',#18107,#18108);+#18107 = CARTESIAN_POINT('',(-0.88628522969,0.187416755247,2.1500001));+#18108 = VECTOR('',#18109,1.);+#18109 = DIRECTION('',(-0.,-0.,-1.));+#18110 = PCURVE('',#5557,#18111);+#18111 = DEFINITIONAL_REPRESENTATION('',(#18112),#18116);+#18112 = LINE('',#18113,#18114);+#18113 = CARTESIAN_POINT('',(0.,0.));+#18114 = VECTOR('',#18115,1.);+#18115 = DIRECTION('',(0.,-1.));+#18116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18117 = PCURVE('',#5526,#18118);+#18118 = DEFINITIONAL_REPRESENTATION('',(#18119),#18123);+#18119 = LINE('',#18120,#18121);+#18120 = CARTESIAN_POINT('',(0.10566097681,0.));+#18121 = VECTOR('',#18122,1.);+#18122 = DIRECTION('',(0.,-1.));+#18123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18124 = ORIENTED_EDGE('',*,*,#16584,.T.);+#18125 = ORIENTED_EDGE('',*,*,#18077,.F.);+#18126 = ADVANCED_FACE('',(#18127),#5526,.T.);+#18127 = FACE_BOUND('',#18128,.T.);+#18128 = EDGE_LOOP('',(#18129,#18130,#18151,#18152));+#18129 = ORIENTED_EDGE('',*,*,#5510,.F.);+#18130 = ORIENTED_EDGE('',*,*,#18131,.T.);+#18131 = EDGE_CURVE('',#5484,#16539,#18132,.T.);+#18132 = SURFACE_CURVE('',#18133,(#18137,#18144),.PCURVE_S1.);+#18133 = LINE('',#18134,#18135);+#18134 = CARTESIAN_POINT('',(-0.9919462065,0.187416755247,2.1500001));+#18135 = VECTOR('',#18136,1.);+#18136 = DIRECTION('',(-0.,-0.,-1.));+#18137 = PCURVE('',#5526,#18138);+#18138 = DEFINITIONAL_REPRESENTATION('',(#18139),#18143);+#18139 = LINE('',#18140,#18141);+#18140 = CARTESIAN_POINT('',(0.,0.));+#18141 = VECTOR('',#18142,1.);+#18142 = DIRECTION('',(0.,-1.));+#18143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18144 = PCURVE('',#5499,#18145);+#18145 = DEFINITIONAL_REPRESENTATION('',(#18146),#18150);+#18146 = LINE('',#18147,#18148);+#18147 = CARTESIAN_POINT('',(0.356904611713,0.));+#18148 = VECTOR('',#18149,1.);+#18149 = DIRECTION('',(0.,-1.));+#18150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18151 = ORIENTED_EDGE('',*,*,#16561,.T.);+#18152 = ORIENTED_EDGE('',*,*,#18104,.F.);+#18153 = ADVANCED_FACE('',(#18154),#5499,.T.);+#18154 = FACE_BOUND('',#18155,.T.);+#18155 = EDGE_LOOP('',(#18156,#18157,#18178,#18179));+#18156 = ORIENTED_EDGE('',*,*,#5483,.F.);+#18157 = ORIENTED_EDGE('',*,*,#18158,.T.);+#18158 = EDGE_CURVE('',#5457,#16537,#18159,.T.);+#18159 = SURFACE_CURVE('',#18160,(#18164,#18171),.PCURVE_S1.);+#18160 = LINE('',#18161,#18162);+#18161 = CARTESIAN_POINT('',(-0.9919462065,-0.169487856467,2.1500001));+#18162 = VECTOR('',#18163,1.);+#18163 = DIRECTION('',(-0.,-0.,-1.));+#18164 = PCURVE('',#5499,#18165);+#18165 = DEFINITIONAL_REPRESENTATION('',(#18166),#18170);+#18166 = LINE('',#18167,#18168);+#18167 = CARTESIAN_POINT('',(0.,0.));+#18168 = VECTOR('',#18169,1.);+#18169 = DIRECTION('',(0.,-1.));+#18170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18171 = PCURVE('',#5472,#18172);+#18172 = DEFINITIONAL_REPRESENTATION('',(#18173),#18177);+#18173 = LINE('',#18174,#18175);+#18174 = CARTESIAN_POINT('',(0.10566097681,0.));