component
SY8008BAAC
Public Made by Adomby adom
Silergy Corp DC-DC Converters, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,13 +32,13 @@ "number": "1", "name": "EN", "type": "input",- "description": "Enable control input. Pull high (>1.5V) to turn on the regulator; pull below 0.4V to disable. Must not be left floating; a 1M\u03a9 pull-down to GND is recommended when driven from a high-impedance source connected to a battery rail."+ "description": "Enable control input. Pull high (>1.5V) to turn on the regulator; pull below 0.4V to disable. Must not be left floating; a 1MΩ pull-down to GND is recommended when driven from a high-impedance source connected to a battery rail." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Ground return pin. Also serves as the case position for \u03b8JC thermal measurement; maximize PCB copper area for best thermal and noise performance."+ "description": "Ground return pin. Also serves as the case position for θJC thermal measurement; maximize PCB copper area for best thermal and noise performance." }, { "number": "3",@@ -50,13 +50,13 @@ "number": "4", "name": "IN", "type": "power_in",- "description": "Supply input pin, 2.5V to 5.5V operating range (6.0V absolute max). Decouple to GND with at least a 1\u00b5F (X7R, \u22654.7\u00b5F recommended, \u22656V rated) ceramic capacitor placed close to the IN/GND pins."+ "description": "Supply input pin, 2.5V to 5.5V operating range (6.0V absolute max). Decouple to GND with at least a 1µF (X7R, ≥4.7µF recommended, ≥6V rated) ceramic capacitor placed close to the IN/GND pins." }, { "number": "5", "name": "FB", "type": "input",- "description": "Output voltage feedback pin. Connect to the center point of an external resistor divider from VOUT to program the output: Vout = 0.6V \u00d7 (1 + R1/R2). Internal reference is 0.6V (\u00b12%). An optional 10-47pF feed-forward cap across R1 speeds up the transient response."+ "description": "Output voltage feedback pin. Connect to the center point of an external resistor divider from VOUT to program the output: Vout = 0.6V × (1 + R1/R2). Internal reference is 0.6V (±2%). An optional 10-47pF feed-forward cap across R1 speeds up the transient response." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/sy8008baac-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }