component
SY6280AAAC
Public Made by Adomby adom
Silergy Corp AC-DC Controllers and Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C207620). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+28−8
page.json+8−6@@ -26,37 +26,39 @@ "model_3d_step": "sy6280aaac.step", "lbr": "sy6280aaac.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C207620"+ }, "pins": [ { "number": "1", "name": "OUT", "type": "power_out",- "description": "Switched power output pin. Connect a 10µF decoupling capacitor to GND. Delivers up to 2A load current from the internal P-channel MOSFET (R_DS(on) ~63mΩ typ.). No body diode, so reverse current from OUT to IN is blocked when disabled."+ "description": "Switched power output pin. Connect a 10\u00b5F decoupling capacitor to GND. Delivers up to 2A load current from the internal P-channel MOSFET (R_DS(on) ~63m\u03a9 typ.). No body diode, so reverse current from OUT to IN is blocked when disabled." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Device ground reference. Also the case position for θ_JC thermal measurement per JEDEC 51-3."+ "description": "Device ground reference. Also the case position for \u03b8_JC thermal measurement per JEDEC 51-3." }, { "number": "3", "name": "ISET", "type": "input",- "description": "Current-limit programming pin. Connect a resistor R_SET from this pin to GND to set the over-current threshold: I_LIM (A) = 6800 / R_SET (Ω). Minimum programmable limit is 0.4A; operation above 2A is not recommended."+ "description": "Current-limit programming pin. Connect a resistor R_SET from this pin to GND to set the over-current threshold: I_LIM (A) = 6800 / R_SET (\u03a9). Minimum programmable limit is 0.4A; operation above 2A is not recommended." }, { "number": "4", "name": "EN", "type": "input",- "description": "Active-high ON/OFF enable input. V_EN(H) ≥ 2V to enable, V_EN(L) ≤ 0.8V to disable; leakage 1µA at 5V. Must not be left floating."+ "description": "Active-high ON/OFF enable input. V_EN(H) \u2265 2V to enable, V_EN(L) \u2264 0.8V to disable; leakage 1\u00b5A at 5V. Must not be left floating." }, { "number": "5", "name": "IN", "type": "power_in",- "description": "Power input pin, 2.4V to 5.5V operating range (6V absolute maximum). Decouple with a 10µF ceramic capacitor to GND, placed close to the pin, to prevent input droop during hot-plug and to suppress ringing from output short events. UVLO threshold ~2.3V with 0.1V hysteresis."+ "description": "Power input pin, 2.4V to 5.5V operating range (6V absolute maximum). Decouple with a 10\u00b5F ceramic capacitor to GND, placed close to the pin, to prevent input droop during hot-plug and to suppress ringing from output short events. UVLO threshold ~2.3V with 0.1V hysteresis." } ], "provenance": {
sy6280aaac.lbr+20−2@@ -59,6 +59,18 @@ <smd name="3" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="SY6280AAAC">@@ -100,7 +112,13 @@ <connect gate="G$1" pin="IN" pad="5"/> <connect gate="G$1" pin="EN" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="SY6280AAAC" constant="no"/>+ <attribute name="MANUFACTURER" value="Silergy Corp" constant="no"/>+ <attribute name="LCSC_PN" value="C207620" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>