component
STWD100NYWY3F
Public Made by Adomby adom
STWD100NYWY3F with source-traceable pin map and explicitly nominal drawing-led CAD.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "WDO", "type": "output",- "description": "Active-low watchdog output. Asserted low when the internal watchdog timer expires without being cleared. Available as open-drain (requires external pull-up, e.g. 10 k\u03a9 to a supply up to 6 V) or push-pull depending on device suffix."+ "description": "Active-low watchdog output. Asserted low when the internal watchdog timer expires without being cleared. Available as open-drain (requires external pull-up, e.g. 10 kΩ to a supply up to 6 V) or push-pull depending on device suffix." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Active-low chip enable input. When low the watchdog is enabled; when high the watchdog is disabled. Has an internal pull-down to GND, so the device is enabled if EN is left floating. Pulses \u22651 \u00b5s are detected; glitches shorter than 100 ns are ignored."+ "description": "Active-low chip enable input. When low the watchdog is enabled; when high the watchdog is disabled. Has an internal pull-down to GND, so the device is enabled if EN is left floating. Pulses ≥1 µs are detected; glitches shorter than 100 ns are ignored." }, { "number": "4", "name": "WDI", "type": "input",- "description": "Watchdog input. Must be toggled within the watchdog timeout period tWD to clear the internal timer, otherwise WDO is asserted. Low-to-high transitions reset the timer on all versions; high-to-low transitions also reset it on STWD100xW/xX/xY. Pulses \u22651 \u00b5s are detected; glitches shorter than 100 ns are ignored."+ "description": "Watchdog input. Must be toggled within the watchdog timeout period tWD to clear the internal timer, otherwise WDO is asserted. Low-to-high transitions reset the timer on all versions; high-to-low transitions also reset it on STWD100xW/xX/xY. Pulses ≥1 µs are detected; glitches shorter than 100 ns are ignored." }, { "number": "5", "name": "VCC", "type": "power_in",- "description": "Supply voltage input. Watchdog timer starts running once VCC rises above the startup voltage VSTART (~2.2 V). Typical operating current 13 \u00b5A."+ "description": "Supply voltage input. Watchdog timer starts running once VCC rises above the startup voltage VSTART (~2.2 V). Typical operating current 13 µA." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/stwd100nywy3f-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }