component
STWD100NPWY3F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -53,7 +53,7 @@ "number": "1", "name": "WDO", "type": "output",- "description": "Active-low watchdog output (open drain or push-pull depending on version) that is asserted when the watchdog timer expires without being cleared; an open-drain output needs an external pull-up to a supply up to 6 V (10 k\u03a9 typical)."+ "description": "Active-low watchdog output (open drain or push-pull depending on version) that is asserted when the watchdog timer expires without being cleared; an open-drain output needs an external pull-up to a supply up to 6 V (10 kΩ typical)." }, { "number": "2",@@ -65,13 +65,13 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable pin with an internal pull-down resistor (32 to 100 k\u03a9, 63 k\u03a9 typ.), so the device is enabled when left floating; pulses of at least 1 \u00b5s are detected and glitches shorter than 100 ns are ignored."+ "description": "Enable pin with an internal pull-down resistor (32 to 100 kΩ, 63 kΩ typ.), so the device is enabled when left floating; pulses of at least 1 µs are detected and glitches shorter than 100 ns are ignored." }, { "number": "4", "name": "WDI", "type": "input",- "description": "Watchdog input that must be toggled within the watchdog timeout period tWD to clear the internal timer, otherwise WDO is asserted; pulses of at least 1 \u00b5s are detected and glitches under 100 ns are ignored."+ "description": "Watchdog input that must be toggled within the watchdog timeout period tWD to clear the internal timer, otherwise WDO is asserted; pulses of at least 1 µs are detected and glitches under 100 ns are ignored." }, { "number": "5",@@ -158,5 +158,8 @@ "docs/stwd100npwy3f-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }