component
STWD100NPWY3F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
stwd100npwy3f: factory component page (tier=lcsc)
3 files changed
+14211−26
page.json+47−26@@ -1,8 +1,11 @@ {+ "schema_version": 1,+ "type": "component", "slug": "stwd100npwy3f",+ "title": "STWD100NPWY3F",+ "brief": "STMicroelectronics Supervisor And Reset ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics Supervisor And Reset ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "power management (pmic)",@@ -10,24 +13,6 @@ "factory-2.0.0", "extractor-text" ],- "dependencies": {},- "hero": {- "type": "image",- "path": "docs/hero.png"- },- "files": [- "page.json",- "README.md",- "stwd100npwy3f.kicad_sym",- "stwd100npwy3f.kicad_mod",- "stwd100npwy3f.glb",- "stwd100npwy3f.step",- "stwd100npwy3f.lbr",- "docs/hero.png",- "docs/stwd100npwy3f-datasheet.pdf",- "viewers/symbol.html",- "viewers/footprint.html"- ], "component": { "mpn": "STWD100NPWY3F", "manufacturer": "STMicroelectronics",@@ -68,7 +53,7 @@ "number": "1", "name": "WDO", "type": "output",- "description": "Active-low watchdog output (open drain or push-pull depending on version) that is asserted when the watchdog timer expires without being cleared; an open-drain output needs an external pull-up to a supply up to 6 V (10 kΩ typical)."+ "description": "Active-low watchdog output (open drain or push-pull depending on version) that is asserted when the watchdog timer expires without being cleared; an open-drain output needs an external pull-up to a supply up to 6 V (10 k\u03a9 typical)." }, { "number": "2",@@ -80,13 +65,13 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable pin with an internal pull-down resistor (32 to 100 kΩ, 63 kΩ typ.), so the device is enabled when left floating; pulses of at least 1 µs are detected and glitches shorter than 100 ns are ignored."+ "description": "Enable pin with an internal pull-down resistor (32 to 100 k\u03a9, 63 k\u03a9 typ.), so the device is enabled when left floating; pulses of at least 1 \u00b5s are detected and glitches shorter than 100 ns are ignored." }, { "number": "4", "name": "WDI", "type": "input",- "description": "Watchdog input that must be toggled within the watchdog timeout period tWD to clear the internal timer, otherwise WDO is asserted; pulses of at least 1 µs are detected and glitches under 100 ns are ignored."+ "description": "Watchdog input that must be toggled within the watchdog timeout period tWD to clear the internal timer, otherwise WDO is asserted; pulses of at least 1 \u00b5s are detected and glitches under 100 ns are ignored." }, { "number": "5",@@ -132,10 +117,46 @@ "footprint": "viewers/footprint.html" } },- "visibility": "public",- "org": "adom",+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "SOT-23-5",+ "Category": "Power Management (PMIC)",+ "Pins": "5"+ }+ },+ "variants": [],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "stwd100npwy3f"+ ],+ "discovery_pitch": "STWD100NPWY3F (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.", "author": { "name": "Ray", "email": "[email protected]"- }+ },+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stwd100npwy3f.kicad_sym",+ "stwd100npwy3f.kicad_mod",+ "stwd100npwy3f.glb",+ "stwd100npwy3f.step",+ "stwd100npwy3f.lbr",+ "docs/hero.png",+ "docs/stwd100npwy3f-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ] }
stwd100npwy3f-etched.glbadded⋯ 1 unchanged line ⋯
stwd100npwy3f-etched.stepadded+14164@@ -0,0 +1,14164 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-01T06:57:01',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.8','Open CASCADE 7.8'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('SOT-23-5','SOT-23-5','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('Adom.Chip','Adom.Chip','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#3106);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#77,#140,#163,#192,#215,#286,#341,#364,#387,+ #404,#427,#515,#531,#561,#592,#623,#654,#685,#716,#733,#750,#781,+ #812,#843,#873,#896,#919,#936,#981,#1051,#1074,#1097,#1120,#1175,+ #1213,#1262,#1354,#1379,#1463,#1485,#1577,#1602,#1686,#1703,#1788,+ #1813,#1890,#1975,#2000,#2077,#2094,#2186,#2211,#2295,#2312,#2331,+ #2350,#2396,#2412,#2431,#2447,#2464,#2476,#2493,#2510,#2527,#2544,+ #2561,#2578,#2595,#2607,#2624,#2641,#2658,#2675,#2692,#2709,#2726,+ #2738,#2755,#2772,#2789,#2806,#2823,#2840,#2852,#2869,#2886,#2903,+ #2920,#2937,#2954,#2966,#2983,#3000,#3017,#3034,#3051,#3068,#3085,+ #3097));+#39 = ADVANCED_FACE('',(#40),#72,.F.);+#40 = FACE_BOUND('',#41,.F.);+#41 = EDGE_LOOP('',(#42,#52,#59,#67));+#42 = ORIENTED_EDGE('',*,*,#43,.T.);+#43 = EDGE_CURVE('',#44,#46,#48,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#46 = VERTEX_POINT('',#47);+#47 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#48 = LINE('',#49,#50);+#49 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#50 = VECTOR('',#51,1.);+#51 = DIRECTION('',(1.,1.110223024625E-16,0.));+#52 = ORIENTED_EDGE('',*,*,#53,.T.);+#53 = EDGE_CURVE('',#46,#54,#56,.T.);+#54 = VERTEX_POINT('',#55);+#55 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#56 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57,#58),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#57 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#58 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#59 = ORIENTED_EDGE('',*,*,#60,.F.);+#60 = EDGE_CURVE('',#61,#54,#63,.T.);+#61 = VERTEX_POINT('',#62);+#62 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#63 = LINE('',#64,#65);+#64 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#65 = VECTOR('',#66,1.);+#66 = DIRECTION('',(1.,1.110223024625E-16,0.));+#67 = ORIENTED_EDGE('',*,*,#68,.F.);+#68 = EDGE_CURVE('',#44,#61,#69,.T.);+#69 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#70,#71),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#70 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#71 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#72 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#73,#74)+ ,(#75,#76)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#73 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#74 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#75 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#76 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#77 = ADVANCED_FACE('',(#78),#135,.F.);+#78 = FACE_BOUND('',#79,.T.);+#79 = EDGE_LOOP('',(#80,#81,#89,#97,#105,#113,#121,#129));+#80 = ORIENTED_EDGE('',*,*,#43,.T.);+#81 = ORIENTED_EDGE('',*,*,#82,.T.);+#82 = EDGE_CURVE('',#46,#83,#85,.T.);+#83 = VERTEX_POINT('',#84);+#84 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#85 = LINE('',#86,#87);+#86 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#87 = VECTOR('',#88,1.);+#88 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#89 = ORIENTED_EDGE('',*,*,#90,.T.);+#90 = EDGE_CURVE('',#83,#91,#93,.T.);+#91 = VERTEX_POINT('',#92);+#92 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#93 = LINE('',#94,#95);+#94 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#95 = VECTOR('',#96,1.);+#96 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#97 = ORIENTED_EDGE('',*,*,#98,.T.);+#98 = EDGE_CURVE('',#91,#99,#101,.T.);+#99 = VERTEX_POINT('',#100);+#100 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#101 = LINE('',#102,#103);+#102 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#103 = VECTOR('',#104,1.);+#104 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#105 = ORIENTED_EDGE('',*,*,#106,.T.);+#106 = EDGE_CURVE('',#99,#107,#109,.T.);+#107 = VERTEX_POINT('',#108);+#108 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#109 = LINE('',#110,#111);+#110 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#111 = VECTOR('',#112,1.);+#112 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#113 = ORIENTED_EDGE('',*,*,#114,.T.);+#114 = EDGE_CURVE('',#107,#115,#117,.T.);+#115 = VERTEX_POINT('',#116);+#116 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#117 = LINE('',#118,#119);+#118 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#119 = VECTOR('',#120,1.);+#120 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#121 = ORIENTED_EDGE('',*,*,#122,.T.);+#122 = EDGE_CURVE('',#115,#123,#125,.T.);+#123 = VERTEX_POINT('',#124);+#124 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#125 = LINE('',#126,#127);+#126 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#127 = VECTOR('',#128,1.);+#128 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#129 = ORIENTED_EDGE('',*,*,#130,.T.);+#130 = EDGE_CURVE('',#123,#44,#131,.T.);+#131 = LINE('',#132,#133);+#132 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#133 = VECTOR('',#134,1.);+#134 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#135 = PLANE('',#136);+#136 = AXIS2_PLACEMENT_3D('',#137,#138,#139);+#137 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#138 = DIRECTION('',(0.,0.,1.));+#139 = DIRECTION('',(0.436587433964,-0.899661832304,0.));+#140 = ADVANCED_FACE('',(#141),#158,.F.);+#141 = FACE_BOUND('',#142,.F.);+#142 = EDGE_LOOP('',(#143,#144,#151,#157));+#143 = ORIENTED_EDGE('',*,*,#82,.T.);+#144 = ORIENTED_EDGE('',*,*,#145,.T.);+#145 = EDGE_CURVE('',#83,#146,#148,.T.);+#146 = VERTEX_POINT('',#147);+#147 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#148 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#149,#150),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#149 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#150 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#151 = ORIENTED_EDGE('',*,*,#152,.F.);+#152 = EDGE_CURVE('',#54,#146,#153,.T.);+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#157 = ORIENTED_EDGE('',*,*,#53,.F.);+#158 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#159,#160)+ ,(#161,#162+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#159 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#160 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#161 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#162 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#163 = ADVANCED_FACE('',(#164),#187,.F.);+#164 = FACE_BOUND('',#165,.F.);+#165 = EDGE_LOOP('',(#166,#167,#174,#182));+#166 = ORIENTED_EDGE('',*,*,#60,.T.);+#167 = ORIENTED_EDGE('',*,*,#168,.T.);+#168 = EDGE_CURVE('',#54,#169,#171,.T.);+#169 = VERTEX_POINT('',#170);+#170 = CARTESIAN_POINT('',(0.705,1.45,0.9));+#171 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#172,#173),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#172 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#173 = CARTESIAN_POINT('',(0.705,1.45,0.9));+#174 = ORIENTED_EDGE('',*,*,#175,.F.);+#175 = EDGE_CURVE('',#176,#169,#178,.T.);+#176 = VERTEX_POINT('',#177);+#177 = CARTESIAN_POINT('',(-0.705,1.45,0.9));+#178 = LINE('',#179,#180);+#179 = CARTESIAN_POINT('',(-0.705,1.45,0.9));+#180 = VECTOR('',#181,1.);+#181 = DIRECTION('',(1.,1.110223024625E-16,0.));+#182 = ORIENTED_EDGE('',*,*,#183,.F.);+#183 = EDGE_CURVE('',#61,#176,#184,.T.);+#184 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#185,#186),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#185 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#186 = CARTESIAN_POINT('',(-0.705,1.45,0.9));+#187 = PLANE('',#188);+#188 = AXIS2_PLACEMENT_3D('',#189,#190,#191);+#189 = CARTESIAN_POINT('',(-0.705,1.45,0.9));+#190 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#191 = DIRECTION('',(1.,1.110223024625E-16,0.));+#192 = ADVANCED_FACE('',(#193),#210,.F.);+#193 = FACE_BOUND('',#194,.F.);+#194 = EDGE_LOOP('',(#195,#196,#197,#205));+#195 = ORIENTED_EDGE('',*,*,#130,.T.);+#196 = ORIENTED_EDGE('',*,*,#68,.T.);+#197 = ORIENTED_EDGE('',*,*,#198,.F.);+#198 = EDGE_CURVE('',#199,#61,#201,.T.);+#199 = VERTEX_POINT('',#200);+#200 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#205 = ORIENTED_EDGE('',*,*,#206,.F.);+#206 = EDGE_CURVE('',#123,#199,#207,.T.);+#207 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#208,#209),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#208 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#209 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#210 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#211,#212)+ ,(#213,#214+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#211 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#212 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#213 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#214 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#215 = ADVANCED_FACE('',(#216),#281,.F.);+#216 = FACE_BOUND('',#217,.F.);+#217 = EDGE_LOOP('',(#218,#219,#220,#228,#236,#244,#252,#260,#268,#276)+ );+#218 = ORIENTED_EDGE('',*,*,#122,.T.);+#219 = ORIENTED_EDGE('',*,*,#206,.T.);+#220 = ORIENTED_EDGE('',*,*,#221,.F.);+#221 = EDGE_CURVE('',#222,#199,#224,.T.);+#222 = VERTEX_POINT('',#223);+#223 = CARTESIAN_POINT('',(-0.8,1.2,0.75));+#224 = LINE('',#225,#226);+#225 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#226 = VECTOR('',#227,1.);+#227 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#228 = ORIENTED_EDGE('',*,*,#229,.F.);+#229 = EDGE_CURVE('',#230,#222,#232,.T.);+#230 = VERTEX_POINT('',#231);+#231 = CARTESIAN_POINT('',(-0.8,0.7,0.75));+#232 = LINE('',#233,#234);+#233 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#234 = VECTOR('',#235,1.);+#235 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#236 = ORIENTED_EDGE('',*,*,#237,.F.);+#237 = EDGE_CURVE('',#238,#230,#240,.T.);+#238 = VERTEX_POINT('',#239);+#239 = CARTESIAN_POINT('',(-0.8,0.25,0.75));+#240 = LINE('',#241,#242);+#241 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#242 = VECTOR('',#243,1.);+#243 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#244 = ORIENTED_EDGE('',*,*,#245,.F.);+#245 = EDGE_CURVE('',#246,#238,#248,.T.);+#246 = VERTEX_POINT('',#247);+#247 = CARTESIAN_POINT('',(-0.8,-0.25,0.75));+#248 = LINE('',#249,#250);+#249 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#250 = VECTOR('',#251,1.);+#251 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#252 = ORIENTED_EDGE('',*,*,#253,.F.);+#253 = EDGE_CURVE('',#254,#246,#256,.T.);+#254 = VERTEX_POINT('',#255);+#255 = CARTESIAN_POINT('',(-0.8,-0.7,0.75));+#256 = LINE('',#257,#258);+#257 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#258 = VECTOR('',#259,1.);+#259 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#260 = ORIENTED_EDGE('',*,*,#261,.F.);+#261 = EDGE_CURVE('',#262,#254,#264,.T.);+#262 = VERTEX_POINT('',#263);+#263 = CARTESIAN_POINT('',(-0.8,-1.2,0.75));+#264 = LINE('',#265,#266);+#265 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#266 = VECTOR('',#267,1.);+#267 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#268 = ORIENTED_EDGE('',*,*,#269,.F.);+#269 = EDGE_CURVE('',#270,#262,#272,.T.);+#270 = VERTEX_POINT('',#271);+#271 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#272 = LINE('',#273,#274);+#273 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#274 = VECTOR('',#275,1.);+#275 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#276 = ORIENTED_EDGE('',*,*,#277,.F.);+#277 = EDGE_CURVE('',#115,#270,#278,.T.);+#278 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#279,#280),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#279 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#280 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#281 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#282,#283)+ ,(#284,#285+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#282 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#283 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#284 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#285 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#286 = ADVANCED_FACE('',(#287),#336,.F.);+#287 = FACE_BOUND('',#288,.F.);+#288 = EDGE_LOOP('',(#289,#290,#297,#305,#313,#321,#329,#335));+#289 = ORIENTED_EDGE('',*,*,#90,.T.);+#290 = ORIENTED_EDGE('',*,*,#291,.T.);+#291 = EDGE_CURVE('',#91,#292,#294,.T.);+#292 = VERTEX_POINT('',#293);+#293 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#294 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#295,#296),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#295 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#296 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#297 = ORIENTED_EDGE('',*,*,#298,.F.);+#298 = EDGE_CURVE('',#299,#292,#301,.T.);+#299 = VERTEX_POINT('',#300);+#300 = CARTESIAN_POINT('',(0.8,-1.2,0.75));+#301 = LINE('',#302,#303);+#302 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#303 = VECTOR('',#304,1.);+#304 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#305 = ORIENTED_EDGE('',*,*,#306,.F.);+#306 = EDGE_CURVE('',#307,#299,#309,.T.);+#307 = VERTEX_POINT('',#308);+#308 = CARTESIAN_POINT('',(0.8,-0.7,0.75));+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#313 = ORIENTED_EDGE('',*,*,#314,.F.);+#314 = EDGE_CURVE('',#315,#307,#317,.T.);+#315 = VERTEX_POINT('',#316);+#316 = CARTESIAN_POINT('',(0.8,0.7,0.75));+#317 = LINE('',#318,#319);+#318 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#319 = VECTOR('',#320,1.);+#320 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#321 = ORIENTED_EDGE('',*,*,#322,.F.);+#322 = EDGE_CURVE('',#323,#315,#325,.T.);+#323 = VERTEX_POINT('',#324);+#324 = CARTESIAN_POINT('',(0.8,1.2,0.75));+#325 = LINE('',#326,#327);+#326 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#327 = VECTOR('',#328,1.);+#328 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#329 = ORIENTED_EDGE('',*,*,#330,.F.);+#330 = EDGE_CURVE('',#146,#323,#331,.T.);+#331 = LINE('',#332,#333);+#332 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#333 = VECTOR('',#334,1.);+#334 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#335 = ORIENTED_EDGE('',*,*,#145,.F.);+#336 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#337,#338)+ ,(#339,#340+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#337 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#338 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#339 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#340 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#341 = ADVANCED_FACE('',(#342),#359,.F.);+#342 = FACE_BOUND('',#343,.F.);+#343 = EDGE_LOOP('',(#344,#345,#346,#354));+#344 = ORIENTED_EDGE('',*,*,#114,.T.);+#345 = ORIENTED_EDGE('',*,*,#277,.T.);+#346 = ORIENTED_EDGE('',*,*,#347,.F.);+#347 = EDGE_CURVE('',#348,#270,#350,.T.);+#348 = VERTEX_POINT('',#349);+#349 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#354 = ORIENTED_EDGE('',*,*,#355,.F.);+#355 = EDGE_CURVE('',#107,#348,#356,.T.);+#356 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#357,#358),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#357 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#358 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#359 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#360,#361)+ ,(#362,#363+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#360 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#361 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#362 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#363 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#364 = ADVANCED_FACE('',(#365),#382,.F.);+#365 = FACE_BOUND('',#366,.F.);+#366 = EDGE_LOOP('',(#367,#368,#375,#381));+#367 = ORIENTED_EDGE('',*,*,#98,.T.);+#368 = ORIENTED_EDGE('',*,*,#369,.T.);+#369 = EDGE_CURVE('',#99,#370,#372,.T.);+#370 = VERTEX_POINT('',#371);+#371 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#372 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#373,#374),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#373 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#374 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#375 = ORIENTED_EDGE('',*,*,#376,.F.);+#376 = EDGE_CURVE('',#292,#370,#377,.T.);+#377 = LINE('',#378,#379);+#378 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#379 = VECTOR('',#380,1.);+#380 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#381 = ORIENTED_EDGE('',*,*,#291,.F.);+#382 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#383,#384)+ ,(#385,#386+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#383 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#384 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#385 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#386 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#387 = ADVANCED_FACE('',(#388),#399,.F.);+#388 = FACE_BOUND('',#389,.F.);+#389 = EDGE_LOOP('',(#390,#391,#392,#398));+#390 = ORIENTED_EDGE('',*,*,#106,.T.);+#391 = ORIENTED_EDGE('',*,*,#355,.T.);+#392 = ORIENTED_EDGE('',*,*,#393,.F.);+#393 = EDGE_CURVE('',#370,#348,#394,.T.);+#394 = LINE('',#395,#396);+#395 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#396 = VECTOR('',#397,1.);+#397 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#398 = ORIENTED_EDGE('',*,*,#369,.F.);+#399 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#400,#401)+ ,(#402,#403+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#400 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#401 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#402 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#403 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#404 = ADVANCED_FACE('',(#405),#422,.F.);+#405 = FACE_BOUND('',#406,.F.);+#406 = EDGE_LOOP('',(#407,#408,#415,#421));+#407 = ORIENTED_EDGE('',*,*,#152,.T.);+#408 = ORIENTED_EDGE('',*,*,#409,.T.);+#409 = EDGE_CURVE('',#146,#410,#412,.T.);+#410 = VERTEX_POINT('',#411);+#411 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#412 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#413,#414),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#413 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#414 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#415 = ORIENTED_EDGE('',*,*,#416,.F.);+#416 = EDGE_CURVE('',#169,#410,#417,.T.);+#417 = LINE('',#418,#419);+#418 = CARTESIAN_POINT('',(0.705,1.45,0.9));+#419 = VECTOR('',#420,1.);+#420 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#421 = ORIENTED_EDGE('',*,*,#168,.F.);+#422 = PLANE('',#423);+#423 = AXIS2_PLACEMENT_3D('',#424,#425,#426);+#424 = CARTESIAN_POINT('',(0.705,1.45,0.9));+#425 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#426 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#427 = ADVANCED_FACE('',(#428),#510,.F.);+#428 = FACE_BOUND('',#429,.F.);+#429 = EDGE_LOOP('',(#430,#438,#439,#440,#448,#456,#464,#472,#480,#488,+ #496,#504));+#430 = ORIENTED_EDGE('',*,*,#431,.T.);+#431 = EDGE_CURVE('',#432,#176,#434,.T.);+#432 = VERTEX_POINT('',#433);+#433 = CARTESIAN_POINT('',(-0.8,1.355,0.9));+#434 = LINE('',#435,#436);+#435 = CARTESIAN_POINT('',(-0.8,1.355,0.9));+#436 = VECTOR('',#437,1.);+#437 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#438 = ORIENTED_EDGE('',*,*,#175,.T.);+#439 = ORIENTED_EDGE('',*,*,#416,.T.);+#440 = ORIENTED_EDGE('',*,*,#441,.T.);+#441 = EDGE_CURVE('',#410,#442,#444,.T.);+#442 = VERTEX_POINT('',#443);+#443 = CARTESIAN_POINT('',(0.8,1.2,0.9));+#444 = LINE('',#445,#446);+#445 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#446 = VECTOR('',#447,1.);+#447 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#448 = ORIENTED_EDGE('',*,*,#449,.T.);+#449 = EDGE_CURVE('',#442,#450,#452,.T.);+#450 = VERTEX_POINT('',#451);+#451 = CARTESIAN_POINT('',(0.775,1.2,0.9));+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.85,1.2,0.9));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#456 = ORIENTED_EDGE('',*,*,#457,.F.);+#457 = EDGE_CURVE('',#458,#450,#460,.T.);+#458 = VERTEX_POINT('',#459);+#459 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#464 = ORIENTED_EDGE('',*,*,#465,.F.);+#465 = EDGE_CURVE('',#466,#458,#468,.T.);+#466 = VERTEX_POINT('',#467);+#467 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#468 = LINE('',#469,#470);+#469 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#470 = VECTOR('',#471,1.);+#471 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#472 = ORIENTED_EDGE('',*,*,#473,.F.);+#473 = EDGE_CURVE('',#474,#466,#476,.T.);+#474 = VERTEX_POINT('',#475);+#475 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#476 = LINE('',#477,#478);+#477 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#478 = VECTOR('',#479,1.);+#479 = DIRECTION('',(1.,1.110223024625E-16,0.));+#480 = ORIENTED_EDGE('',*,*,#481,.F.);+#481 = EDGE_CURVE('',#482,#474,#484,.T.);+#482 = VERTEX_POINT('',#483);+#483 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#484 = LINE('',#485,#486);+#485 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#486 = VECTOR('',#487,1.);+#487 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#488 = ORIENTED_EDGE('',*,*,#489,.F.);+#489 = EDGE_CURVE('',#490,#482,#492,.T.);+#490 = VERTEX_POINT('',#491);+#491 = CARTESIAN_POINT('',(-0.775,1.2,0.9));+#492 = LINE('',#493,#494);+#493 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#494 = VECTOR('',#495,1.);+#495 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#496 = ORIENTED_EDGE('',*,*,#497,.F.);+#497 = EDGE_CURVE('',#498,#490,#500,.T.);+#498 = VERTEX_POINT('',#499);+#499 = CARTESIAN_POINT('',(-0.8,1.2,0.9));+#500 = LINE('',#501,#502);+#501 = CARTESIAN_POINT('',(-0.85,1.2,0.9));+#502 = VECTOR('',#503,1.);+#503 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#504 = ORIENTED_EDGE('',*,*,#505,.T.);+#505 = EDGE_CURVE('',#498,#432,#506,.T.);+#506 = LINE('',#507,#508);+#507 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#508 = VECTOR('',#509,1.);+#509 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#510 = PLANE('',#511);+#511 = AXIS2_PLACEMENT_3D('',#512,#513,#514);+#512 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));+#513 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));+#514 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));+#515 = ADVANCED_FACE('',(#516),#526,.F.);+#516 = FACE_BOUND('',#517,.F.);+#517 = EDGE_LOOP('',(#518,#519,#520,#521));+#518 = ORIENTED_EDGE('',*,*,#198,.T.);+#519 = ORIENTED_EDGE('',*,*,#183,.T.);+#520 = ORIENTED_EDGE('',*,*,#431,.F.);+#521 = ORIENTED_EDGE('',*,*,#522,.F.);+#522 = EDGE_CURVE('',#199,#432,#523,.T.);+#523 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#524,#525),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#524 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#525 = CARTESIAN_POINT('',(-0.8,1.355,0.9));+#526 = PLANE('',#527);+#527 = AXIS2_PLACEMENT_3D('',#528,#529,#530);+#528 = CARTESIAN_POINT('',(-0.8,1.355,0.9));+#529 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#530 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#531 = ADVANCED_FACE('',(#532),#556,.F.);+#532 = FACE_BOUND('',#533,.F.);+#533 = EDGE_LOOP('',(#534,#541,#542,#550));+#534 = ORIENTED_EDGE('',*,*,#535,.F.);+#535 = EDGE_CURVE('',#270,#536,#538,.T.);+#536 = VERTEX_POINT('',#537);+#537 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#538 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#539,#540),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#539 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#540 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#541 = ORIENTED_EDGE('',*,*,#269,.T.);+#542 = ORIENTED_EDGE('',*,*,#543,.T.);+#543 = EDGE_CURVE('',#262,#544,#546,.T.);+#544 = VERTEX_POINT('',#545);+#545 = CARTESIAN_POINT('',(-0.8,-1.2,0.9));+#546 = LINE('',#547,#548);+#547 = CARTESIAN_POINT('',(-0.8,-1.2,0.670847817658));+#548 = VECTOR('',#549,1.);+#549 = DIRECTION('',(0.,0.,1.));+#550 = ORIENTED_EDGE('',*,*,#551,.F.);+#551 = EDGE_CURVE('',#536,#544,#552,.T.);+#552 = LINE('',#553,#554);+#553 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#554 = VECTOR('',#555,1.);+#555 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#556 = PLANE('',#557);+#557 = AXIS2_PLACEMENT_3D('',#558,#559,#560);+#558 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#559 = DIRECTION('',(1.,1.110223024625E-16,0.));+#560 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#561 = ADVANCED_FACE('',(#562),#587,.F.);+#562 = FACE_BOUND('',#563,.F.);+#563 = EDGE_LOOP('',(#564,#572,#573,#581));+#564 = ORIENTED_EDGE('',*,*,#565,.F.);+#565 = EDGE_CURVE('',#262,#566,#568,.T.);+#566 = VERTEX_POINT('',#567);+#567 = CARTESIAN_POINT('',(-0.85,-1.2,0.75));+#568 = LINE('',#569,#570);+#569 = CARTESIAN_POINT('',(-0.75,-1.2,0.75));+#570 = VECTOR('',#571,1.);+#571 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#572 = ORIENTED_EDGE('',*,*,#261,.T.);+#573 = ORIENTED_EDGE('',*,*,#574,.T.);+#574 = EDGE_CURVE('',#254,#575,#577,.T.);+#575 = VERTEX_POINT('',#576);+#576 = CARTESIAN_POINT('',(-0.85,-0.7,0.75));+#577 = LINE('',#578,#579);+#578 = CARTESIAN_POINT('',(-0.75,-0.7,0.75));+#579 = VECTOR('',#580,1.);+#580 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#581 = ORIENTED_EDGE('',*,*,#582,.F.);+#582 = EDGE_CURVE('',#566,#575,#583,.T.);+#583 = LINE('',#584,#585);+#584 = CARTESIAN_POINT('',(-0.85,-1.2,0.75));+#585 = VECTOR('',#586,1.);+#586 = DIRECTION('',(1.144237745222E-17,1.,0.));+#587 = PLANE('',#588);+#588 = AXIS2_PLACEMENT_3D('',#589,#590,#591);+#589 = CARTESIAN_POINT('',(-0.75,-1.2,0.75));+#590 = DIRECTION('',(0.,0.,1.));+#591 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#592 = ADVANCED_FACE('',(#593),#618,.F.);+#593 = FACE_BOUND('',#594,.F.);+#594 = EDGE_LOOP('',(#595,#603,#604,#612));+#595 = ORIENTED_EDGE('',*,*,#596,.F.);+#596 = EDGE_CURVE('',#254,#597,#599,.T.);+#597 = VERTEX_POINT('',#598);+#598 = CARTESIAN_POINT('',(-0.8,-0.7,0.9));+#599 = LINE('',#600,#601);+#600 = CARTESIAN_POINT('',(-0.8,-0.7,0.670847817658));+#601 = VECTOR('',#602,1.);+#602 = DIRECTION('',(0.,0.,1.));+#603 = ORIENTED_EDGE('',*,*,#253,.T.);+#604 = ORIENTED_EDGE('',*,*,#605,.T.);+#605 = EDGE_CURVE('',#246,#606,#608,.T.);+#606 = VERTEX_POINT('',#607);+#607 = CARTESIAN_POINT('',(-0.8,-0.25,0.9));+#608 = LINE('',#609,#610);+#609 = CARTESIAN_POINT('',(-0.8,-0.25,0.670847817658));+#610 = VECTOR('',#611,1.);+#611 = DIRECTION('',(0.,0.,1.));+#612 = ORIENTED_EDGE('',*,*,#613,.F.);+#613 = EDGE_CURVE('',#597,#606,#614,.T.);+#614 = LINE('',#615,#616);+#615 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#616 = VECTOR('',#617,1.);+#617 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#618 = PLANE('',#619);+#619 = AXIS2_PLACEMENT_3D('',#620,#621,#622);+#620 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#621 = DIRECTION('',(1.,1.110223024625E-16,0.));+#622 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#623 = ADVANCED_FACE('',(#624),#649,.F.);+#624 = FACE_BOUND('',#625,.F.);+#625 = EDGE_LOOP('',(#626,#634,#635,#643));+#626 = ORIENTED_EDGE('',*,*,#627,.F.);+#627 = EDGE_CURVE('',#246,#628,#630,.T.);+#628 = VERTEX_POINT('',#629);+#629 = CARTESIAN_POINT('',(-0.85,-0.25,0.75));+#630 = LINE('',#631,#632);+#631 = CARTESIAN_POINT('',(-0.75,-0.25,0.75));+#632 = VECTOR('',#633,1.);+#633 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#634 = ORIENTED_EDGE('',*,*,#245,.T.);+#635 = ORIENTED_EDGE('',*,*,#636,.T.);+#636 = EDGE_CURVE('',#238,#637,#639,.T.);+#637 = VERTEX_POINT('',#638);+#638 = CARTESIAN_POINT('',(-0.85,0.25,0.75));+#639 = LINE('',#640,#641);+#640 = CARTESIAN_POINT('',(-0.75,0.25,0.75));+#641 = VECTOR('',#642,1.);+#642 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#643 = ORIENTED_EDGE('',*,*,#644,.F.);+#644 = EDGE_CURVE('',#628,#637,#645,.T.);+#645 = LINE('',#646,#647);+#646 = CARTESIAN_POINT('',(-0.85,-0.25,0.75));+#647 = VECTOR('',#648,1.);+#648 = DIRECTION('',(1.144237745222E-17,1.,0.));+#649 = PLANE('',#650);+#650 = AXIS2_PLACEMENT_3D('',#651,#652,#653);+#651 = CARTESIAN_POINT('',(-0.75,-0.25,0.75));+#652 = DIRECTION('',(0.,0.,1.));+#653 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#654 = ADVANCED_FACE('',(#655),#680,.F.);+#655 = FACE_BOUND('',#656,.F.);+#656 = EDGE_LOOP('',(#657,#665,#666,#674));+#657 = ORIENTED_EDGE('',*,*,#658,.F.);+#658 = EDGE_CURVE('',#238,#659,#661,.T.);+#659 = VERTEX_POINT('',#660);+#660 = CARTESIAN_POINT('',(-0.8,0.25,0.9));+#661 = LINE('',#662,#663);+#662 = CARTESIAN_POINT('',(-0.8,0.25,0.670847817658));+#663 = VECTOR('',#664,1.);+#664 = DIRECTION('',(0.,0.,1.));+#665 = ORIENTED_EDGE('',*,*,#237,.T.);+#666 = ORIENTED_EDGE('',*,*,#667,.T.);+#667 = EDGE_CURVE('',#230,#668,#670,.T.);+#668 = VERTEX_POINT('',#669);+#669 = CARTESIAN_POINT('',(-0.8,0.7,0.9));+#670 = LINE('',#671,#672);+#671 = CARTESIAN_POINT('',(-0.8,0.7,0.670847817658));+#672 = VECTOR('',#673,1.);+#673 = DIRECTION('',(0.,0.,1.));+#674 = ORIENTED_EDGE('',*,*,#675,.F.);+#675 = EDGE_CURVE('',#659,#668,#676,.T.);+#676 = LINE('',#677,#678);+#677 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#678 = VECTOR('',#679,1.);+#679 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#680 = PLANE('',#681);+#681 = AXIS2_PLACEMENT_3D('',#682,#683,#684);+#682 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#683 = DIRECTION('',(1.,1.110223024625E-16,0.));+#684 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#685 = ADVANCED_FACE('',(#686),#711,.F.);+#686 = FACE_BOUND('',#687,.F.);+#687 = EDGE_LOOP('',(#688,#696,#697,#705));+#688 = ORIENTED_EDGE('',*,*,#689,.F.);+#689 = EDGE_CURVE('',#230,#690,#692,.T.);+#690 = VERTEX_POINT('',#691);+#691 = CARTESIAN_POINT('',(-0.85,0.7,0.75));+#692 = LINE('',#693,#694);+#693 = CARTESIAN_POINT('',(-0.75,0.7,0.75));+#694 = VECTOR('',#695,1.);+#695 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#696 = ORIENTED_EDGE('',*,*,#229,.T.);+#697 = ORIENTED_EDGE('',*,*,#698,.T.);+#698 = EDGE_CURVE('',#222,#699,#701,.T.);+#699 = VERTEX_POINT('',#700);+#700 = CARTESIAN_POINT('',(-0.85,1.2,0.75));+#701 = LINE('',#702,#703);+#702 = CARTESIAN_POINT('',(-0.75,1.2,0.75));+#703 = VECTOR('',#704,1.);+#704 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#705 = ORIENTED_EDGE('',*,*,#706,.F.);+#706 = EDGE_CURVE('',#690,#699,#707,.T.);+#707 = LINE('',#708,#709);+#708 = CARTESIAN_POINT('',(-0.85,0.7,0.75));+#709 = VECTOR('',#710,1.);+#710 = DIRECTION('',(1.144237745222E-17,1.,0.));+#711 = PLANE('',#712);+#712 = AXIS2_PLACEMENT_3D('',#713,#714,#715);+#713 = CARTESIAN_POINT('',(-0.75,0.7,0.75));+#714 = DIRECTION('',(0.,0.,1.));+#715 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#716 = ADVANCED_FACE('',(#717),#728,.F.);+#717 = FACE_BOUND('',#718,.F.);+#718 = EDGE_LOOP('',(#719,#725,#726,#727));+#719 = ORIENTED_EDGE('',*,*,#720,.F.);+#720 = EDGE_CURVE('',#222,#498,#721,.T.);+#721 = LINE('',#722,#723);+#722 = CARTESIAN_POINT('',(-0.8,1.2,0.670847817658));+#723 = VECTOR('',#724,1.);+#724 = DIRECTION('',(0.,0.,1.));+#725 = ORIENTED_EDGE('',*,*,#221,.T.);+#726 = ORIENTED_EDGE('',*,*,#522,.T.);+#727 = ORIENTED_EDGE('',*,*,#505,.F.);+#728 = PLANE('',#729);+#729 = AXIS2_PLACEMENT_3D('',#730,#731,#732);+#730 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#731 = DIRECTION('',(1.,1.110223024625E-16,0.));+#732 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#733 = ADVANCED_FACE('',(#734),#745,.F.);+#734 = FACE_BOUND('',#735,.F.);+#735 = EDGE_LOOP('',(#736,#737,#738,#744));+#736 = ORIENTED_EDGE('',*,*,#409,.F.);+#737 = ORIENTED_EDGE('',*,*,#330,.T.);+#738 = ORIENTED_EDGE('',*,*,#739,.T.);+#739 = EDGE_CURVE('',#323,#442,#740,.T.);+#740 = LINE('',#741,#742);+#741 = CARTESIAN_POINT('',(0.8,1.2,0.670847817658));+#742 = VECTOR('',#743,1.);+#743 = DIRECTION('',(0.,0.,1.));+#744 = ORIENTED_EDGE('',*,*,#441,.F.);+#745 = PLANE('',#746);+#746 = AXIS2_PLACEMENT_3D('',#747,#748,#749);+#747 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#748 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#749 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#750 = ADVANCED_FACE('',(#751),#776,.F.);+#751 = FACE_BOUND('',#752,.F.);+#752 = EDGE_LOOP('',(#753,#761,#762,#770));+#753 = ORIENTED_EDGE('',*,*,#754,.F.);+#754 = EDGE_CURVE('',#323,#755,#757,.T.);+#755 = VERTEX_POINT('',#756);+#756 = CARTESIAN_POINT('',(0.85,1.2,0.75));+#757 = LINE('',#758,#759);+#758 = CARTESIAN_POINT('',(0.75,1.2,0.75));+#759 = VECTOR('',#760,1.);+#760 = DIRECTION('',(1.,1.110223024625E-16,0.));+#761 = ORIENTED_EDGE('',*,*,#322,.T.);+#762 = ORIENTED_EDGE('',*,*,#763,.T.);+#763 = EDGE_CURVE('',#315,#764,#766,.T.);+#764 = VERTEX_POINT('',#765);+#765 = CARTESIAN_POINT('',(0.85,0.7,0.75));+#766 = LINE('',#767,#768);+#767 = CARTESIAN_POINT('',(0.75,0.7,0.75));+#768 = VECTOR('',#769,1.);+#769 = DIRECTION('',(1.,1.110223024625E-16,0.));+#770 = ORIENTED_EDGE('',*,*,#771,.F.);+#771 = EDGE_CURVE('',#755,#764,#772,.T.);+#772 = LINE('',#773,#774);+#773 = CARTESIAN_POINT('',(0.85,1.2,0.75));+#774 = VECTOR('',#775,1.);+#775 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#776 = PLANE('',#777);+#777 = AXIS2_PLACEMENT_3D('',#778,#779,#780);+#778 = CARTESIAN_POINT('',(0.75,1.2,0.75));+#779 = DIRECTION('',(0.,0.,1.));+#780 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#781 = ADVANCED_FACE('',(#782),#807,.F.);+#782 = FACE_BOUND('',#783,.F.);+#783 = EDGE_LOOP('',(#784,#792,#793,#801));+#784 = ORIENTED_EDGE('',*,*,#785,.F.);+#785 = EDGE_CURVE('',#315,#786,#788,.T.);+#786 = VERTEX_POINT('',#787);+#787 = CARTESIAN_POINT('',(0.8,0.7,0.9));+#788 = LINE('',#789,#790);+#789 = CARTESIAN_POINT('',(0.8,0.7,0.670847817658));+#790 = VECTOR('',#791,1.);+#791 = DIRECTION('',(0.,0.,1.));+#792 = ORIENTED_EDGE('',*,*,#314,.T.);+#793 = ORIENTED_EDGE('',*,*,#794,.T.);+#794 = EDGE_CURVE('',#307,#795,#797,.T.);+#795 = VERTEX_POINT('',#796);+#796 = CARTESIAN_POINT('',(0.8,-0.7,0.9));+#797 = LINE('',#798,#799);+#798 = CARTESIAN_POINT('',(0.8,-0.7,0.670847817658));+#799 = VECTOR('',#800,1.);+#800 = DIRECTION('',(0.,0.,1.));+#801 = ORIENTED_EDGE('',*,*,#802,.F.);+#802 = EDGE_CURVE('',#786,#795,#803,.T.);+#803 = LINE('',#804,#805);+#804 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#805 = VECTOR('',#806,1.);+#806 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#807 = PLANE('',#808);+#808 = AXIS2_PLACEMENT_3D('',#809,#810,#811);+#809 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#810 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#811 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#812 = ADVANCED_FACE('',(#813),#838,.F.);+#813 = FACE_BOUND('',#814,.F.);+#814 = EDGE_LOOP('',(#815,#823,#824,#832));+#815 = ORIENTED_EDGE('',*,*,#816,.F.);+#816 = EDGE_CURVE('',#307,#817,#819,.T.);+#817 = VERTEX_POINT('',#818);+#818 = CARTESIAN_POINT('',(0.85,-0.7,0.75));+#819 = LINE('',#820,#821);+#820 = CARTESIAN_POINT('',(0.75,-0.7,0.75));+#821 = VECTOR('',#822,1.);+#822 = DIRECTION('',(1.,1.110223024625E-16,0.));+#823 = ORIENTED_EDGE('',*,*,#306,.T.);+#824 = ORIENTED_EDGE('',*,*,#825,.T.);+#825 = EDGE_CURVE('',#299,#826,#828,.T.);+#826 = VERTEX_POINT('',#827);+#827 = CARTESIAN_POINT('',(0.85,-1.2,0.75));+#828 = LINE('',#829,#830);+#829 = CARTESIAN_POINT('',(0.75,-1.2,0.75));+#830 = VECTOR('',#831,1.);+#831 = DIRECTION('',(1.,1.110223024625E-16,0.));+#832 = ORIENTED_EDGE('',*,*,#833,.F.);+#833 = EDGE_CURVE('',#817,#826,#834,.T.);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(0.85,-0.7,0.75));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#838 = PLANE('',#839);+#839 = AXIS2_PLACEMENT_3D('',#840,#841,#842);+#840 = CARTESIAN_POINT('',(0.75,-0.7,0.75));+#841 = DIRECTION('',(0.,0.,1.));+#842 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#843 = ADVANCED_FACE('',(#844),#868,.F.);+#844 = FACE_BOUND('',#845,.F.);+#845 = EDGE_LOOP('',(#846,#854,#855,#862));+#846 = ORIENTED_EDGE('',*,*,#847,.F.);+#847 = EDGE_CURVE('',#299,#848,#850,.T.);+#848 = VERTEX_POINT('',#849);+#849 = CARTESIAN_POINT('',(0.8,-1.2,0.9));+#850 = LINE('',#851,#852);+#851 = CARTESIAN_POINT('',(0.8,-1.2,0.670847817658));+#852 = VECTOR('',#853,1.);+#853 = DIRECTION('',(0.,0.,1.));+#854 = ORIENTED_EDGE('',*,*,#298,.T.);+#855 = ORIENTED_EDGE('',*,*,#856,.T.);+#856 = EDGE_CURVE('',#292,#857,#859,.T.);+#857 = VERTEX_POINT('',#858);+#858 = CARTESIAN_POINT('',(0.8,-1.355,0.9));+#859 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#860,#861),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#860 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#861 = CARTESIAN_POINT('',(0.8,-1.355,0.9));+#862 = ORIENTED_EDGE('',*,*,#863,.F.);+#863 = EDGE_CURVE('',#848,#857,#864,.T.);+#864 = LINE('',#865,#866);+#865 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#866 = VECTOR('',#867,1.);+#867 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#868 = PLANE('',#869);+#869 = AXIS2_PLACEMENT_3D('',#870,#871,#872);+#870 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#871 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#872 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#873 = ADVANCED_FACE('',(#874),#891,.F.);+#874 = FACE_BOUND('',#875,.F.);+#875 = EDGE_LOOP('',(#876,#877,#878,#886));+#876 = ORIENTED_EDGE('',*,*,#347,.T.);+#877 = ORIENTED_EDGE('',*,*,#535,.T.);+#878 = ORIENTED_EDGE('',*,*,#879,.F.);+#879 = EDGE_CURVE('',#880,#536,#882,.T.);+#880 = VERTEX_POINT('',#881);+#881 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));+#882 = LINE('',#883,#884);+#883 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));+#884 = VECTOR('',#885,1.);+#885 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#886 = ORIENTED_EDGE('',*,*,#887,.F.);+#887 = EDGE_CURVE('',#348,#880,#888,.T.);+#888 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#889,#890),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#889 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#890 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));+#891 = PLANE('',#892);+#892 = AXIS2_PLACEMENT_3D('',#893,#894,#895);+#893 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));+#894 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#895 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#896 = ADVANCED_FACE('',(#897),#914,.F.);+#897 = FACE_BOUND('',#898,.F.);+#898 = EDGE_LOOP('',(#899,#900,#907,#913));+#899 = ORIENTED_EDGE('',*,*,#376,.T.);+#900 = ORIENTED_EDGE('',*,*,#901,.T.);+#901 = EDGE_CURVE('',#370,#902,#904,.T.);+#902 = VERTEX_POINT('',#903);+#903 = CARTESIAN_POINT('',(0.705,-1.45,0.9));+#904 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#905,#906),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#905 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#906 = CARTESIAN_POINT('',(0.705,-1.45,0.9));+#907 = ORIENTED_EDGE('',*,*,#908,.F.);+#908 = EDGE_CURVE('',#857,#902,#909,.T.);+#909 = LINE('',#910,#911);+#910 = CARTESIAN_POINT('',(0.8,-1.355,0.9));+#911 = VECTOR('',#912,1.);+#912 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#913 = ORIENTED_EDGE('',*,*,#856,.F.);+#914 = PLANE('',#915);+#915 = AXIS2_PLACEMENT_3D('',#916,#917,#918);+#916 = CARTESIAN_POINT('',(0.8,-1.355,0.9));+#917 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#918 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#919 = ADVANCED_FACE('',(#920),#931,.F.);+#920 = FACE_BOUND('',#921,.F.);+#921 = EDGE_LOOP('',(#922,#923,#924,#930));+#922 = ORIENTED_EDGE('',*,*,#393,.T.);+#923 = ORIENTED_EDGE('',*,*,#887,.T.);+#924 = ORIENTED_EDGE('',*,*,#925,.F.);+#925 = EDGE_CURVE('',#902,#880,#926,.T.);+#926 = LINE('',#927,#928);+#927 = CARTESIAN_POINT('',(0.705,-1.45,0.9));+#928 = VECTOR('',#929,1.);+#929 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#930 = ORIENTED_EDGE('',*,*,#901,.F.);+#931 = PLANE('',#932);+#932 = AXIS2_PLACEMENT_3D('',#933,#934,#935);+#933 = CARTESIAN_POINT('',(0.705,-1.45,0.9));+#934 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#935 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#936 = ADVANCED_FACE('',(#937),#976,.F.);+#937 = FACE_BOUND('',#938,.F.);+#938 = EDGE_LOOP('',(#939,#947,#955,#961,#962,#970));+#939 = ORIENTED_EDGE('',*,*,#940,.F.);+#940 = EDGE_CURVE('',#941,#668,#943,.T.);+#941 = VERTEX_POINT('',#942);+#942 = CARTESIAN_POINT('',(-0.85,0.7,0.9));+#943 = LINE('',#944,#945);+#944 = CARTESIAN_POINT('',(-0.85,0.7,0.9));+#945 = VECTOR('',#946,1.);+#946 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#947 = ORIENTED_EDGE('',*,*,#948,.T.);+#948 = EDGE_CURVE('',#941,#949,#951,.T.);+#949 = VERTEX_POINT('',#950);+#950 = CARTESIAN_POINT('',(-0.85,1.2,0.9));+#951 = LINE('',#952,#953);+#952 = CARTESIAN_POINT('',(-0.85,0.7,0.9));+#953 = VECTOR('',#954,1.);+#954 = DIRECTION('',(1.144237745222E-17,1.,0.));+#955 = ORIENTED_EDGE('',*,*,#956,.T.);+#956 = EDGE_CURVE('',#949,#498,#957,.T.);+#957 = LINE('',#958,#959);+#958 = CARTESIAN_POINT('',(-0.85,1.2,0.9));+#959 = VECTOR('',#960,1.);+#960 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#961 = ORIENTED_EDGE('',*,*,#497,.T.);+#962 = ORIENTED_EDGE('',*,*,#963,.F.);+#963 = EDGE_CURVE('',#964,#490,#966,.T.);+#964 = VERTEX_POINT('',#965);+#965 = CARTESIAN_POINT('',(-0.775,0.7,0.9));+#966 = LINE('',#967,#968);+#967 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#968 = VECTOR('',#969,1.);+#969 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#970 = ORIENTED_EDGE('',*,*,#971,.F.);+#971 = EDGE_CURVE('',#668,#964,#972,.T.);+#972 = LINE('',#973,#974);+#973 = CARTESIAN_POINT('',(-0.85,0.7,0.9));+#974 = VECTOR('',#975,1.);+#975 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#976 = PLANE('',#977);+#977 = AXIS2_PLACEMENT_3D('',#978,#979,#980);+#978 = CARTESIAN_POINT('',(-0.85,0.7,0.9));+#979 = DIRECTION('',(0.,0.,-1.));+#980 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#981 = ADVANCED_FACE('',(#982),#1046,.F.);+#982 = FACE_BOUND('',#983,.F.);+#983 = EDGE_LOOP('',(#984,#994,#1002,#1010,#1018,#1024,#1025,#1026,#1033+ ,#1041));+#984 = ORIENTED_EDGE('',*,*,#985,.T.);+#985 = EDGE_CURVE('',#986,#988,#990,.T.);+#986 = VERTEX_POINT('',#987);+#987 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#988 = VERTEX_POINT('',#989);+#989 = CARTESIAN_POINT('',(-0.775,-1.2,0.9));+#990 = LINE('',#991,#992);+#991 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#992 = VECTOR('',#993,1.);+#993 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#994 = ORIENTED_EDGE('',*,*,#995,.T.);+#995 = EDGE_CURVE('',#988,#996,#998,.T.);+#996 = VERTEX_POINT('',#997);+#997 = CARTESIAN_POINT('',(-0.775,-0.7,0.9));+#998 = LINE('',#999,#1000);+#999 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1000 = VECTOR('',#1001,1.);+#1001 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1002 = ORIENTED_EDGE('',*,*,#1003,.T.);+#1003 = EDGE_CURVE('',#996,#1004,#1006,.T.);+#1004 = VERTEX_POINT('',#1005);+#1005 = CARTESIAN_POINT('',(-0.775,-0.25,0.9));+#1006 = LINE('',#1007,#1008);+#1007 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1008 = VECTOR('',#1009,1.);+#1009 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1010 = ORIENTED_EDGE('',*,*,#1011,.T.);+#1011 = EDGE_CURVE('',#1004,#1012,#1014,.T.);+#1012 = VERTEX_POINT('',#1013);+#1013 = CARTESIAN_POINT('',(-0.775,0.25,0.9));+#1014 = LINE('',#1015,#1016);+#1015 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1016 = VECTOR('',#1017,1.);+#1017 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1018 = ORIENTED_EDGE('',*,*,#1019,.T.);+#1019 = EDGE_CURVE('',#1012,#964,#1020,.T.);+#1020 = LINE('',#1021,#1022);+#1021 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1022 = VECTOR('',#1023,1.);+#1023 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1024 = ORIENTED_EDGE('',*,*,#963,.T.);+#1025 = ORIENTED_EDGE('',*,*,#489,.T.);+#1026 = ORIENTED_EDGE('',*,*,#1027,.T.);+#1027 = EDGE_CURVE('',#482,#1028,#1030,.T.);+#1028 = VERTEX_POINT('',#1029);+#1029 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#1030 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1031,#1032),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1031 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#1032 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#1033 = ORIENTED_EDGE('',*,*,#1034,.F.);+#1034 = EDGE_CURVE('',#1035,#1028,#1037,.T.);+#1035 = VERTEX_POINT('',#1036);+#1036 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#1037 = LINE('',#1038,#1039);+#1038 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#1039 = VECTOR('',#1040,1.);+#1040 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1041 = ORIENTED_EDGE('',*,*,#1042,.F.);+#1042 = EDGE_CURVE('',#986,#1035,#1043,.T.);+#1043 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1044,#1045),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1044 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1045 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#1046 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1047,#1048)+ ,(#1049,#1050+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#1047 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1048 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#1049 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#1050 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#1051 = ADVANCED_FACE('',(#1052),#1069,.F.);+#1052 = FACE_BOUND('',#1053,.F.);+#1053 = EDGE_LOOP('',(#1054,#1055,#1062,#1068));+#1054 = ORIENTED_EDGE('',*,*,#481,.T.);+#1055 = ORIENTED_EDGE('',*,*,#1056,.T.);+#1056 = EDGE_CURVE('',#474,#1057,#1059,.T.);+#1057 = VERTEX_POINT('',#1058);+#1058 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#1059 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1060,#1061),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1060 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#1061 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#1062 = ORIENTED_EDGE('',*,*,#1063,.F.);+#1063 = EDGE_CURVE('',#1028,#1057,#1064,.T.);+#1064 = LINE('',#1065,#1066);+#1065 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#1066 = VECTOR('',#1067,1.);+#1067 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1068 = ORIENTED_EDGE('',*,*,#1027,.F.);+#1069 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1070,#1071)+ ,(#1072,#1073+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#1070 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#1071 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#1072 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#1073 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#1074 = ADVANCED_FACE('',(#1075),#1092,.F.);+#1075 = FACE_BOUND('',#1076,.F.);+#1076 = EDGE_LOOP('',(#1077,#1078,#1085,#1091));+#1077 = ORIENTED_EDGE('',*,*,#473,.T.);+#1078 = ORIENTED_EDGE('',*,*,#1079,.T.);+#1079 = EDGE_CURVE('',#466,#1080,#1082,.T.);+#1080 = VERTEX_POINT('',#1081);+#1081 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#1082 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1083,#1084),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1083 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#1084 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#1085 = ORIENTED_EDGE('',*,*,#1086,.F.);+#1086 = EDGE_CURVE('',#1057,#1080,#1087,.T.);+#1087 = LINE('',#1088,#1089);+#1088 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#1089 = VECTOR('',#1090,1.);+#1090 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1091 = ORIENTED_EDGE('',*,*,#1056,.F.);+#1092 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1093,#1094)+ ,(#1095,#1096+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#1093 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#1094 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#1095 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#1096 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#1097 = ADVANCED_FACE('',(#1098),#1115,.F.);+#1098 = FACE_BOUND('',#1099,.F.);+#1099 = EDGE_LOOP('',(#1100,#1101,#1108,#1114));+#1100 = ORIENTED_EDGE('',*,*,#465,.T.);+#1101 = ORIENTED_EDGE('',*,*,#1102,.T.);+#1102 = EDGE_CURVE('',#458,#1103,#1105,.T.);+#1103 = VERTEX_POINT('',#1104);+#1104 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#1105 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1106,#1107),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1106 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1107 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#1108 = ORIENTED_EDGE('',*,*,#1109,.F.);+#1109 = EDGE_CURVE('',#1080,#1103,#1110,.T.);+#1110 = LINE('',#1111,#1112);+#1111 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#1112 = VECTOR('',#1113,1.);+#1113 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1114 = ORIENTED_EDGE('',*,*,#1079,.F.);+#1115 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1116,#1117)+ ,(#1118,#1119+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#1116 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#1117 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#1118 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1119 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#1120 = ADVANCED_FACE('',(#1121),#1170,.F.);+#1121 = FACE_BOUND('',#1122,.F.);+#1122 = EDGE_LOOP('',(#1123,#1124,#1132,#1140,#1148,#1156,#1163,#1169));+#1123 = ORIENTED_EDGE('',*,*,#457,.T.);+#1124 = ORIENTED_EDGE('',*,*,#1125,.T.);+#1125 = EDGE_CURVE('',#450,#1126,#1128,.T.);+#1126 = VERTEX_POINT('',#1127);+#1127 = CARTESIAN_POINT('',(0.775,0.7,0.9));+#1128 = LINE('',#1129,#1130);+#1129 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1130 = VECTOR('',#1131,1.);+#1131 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1132 = ORIENTED_EDGE('',*,*,#1133,.T.);+#1133 = EDGE_CURVE('',#1126,#1134,#1136,.T.);+#1134 = VERTEX_POINT('',#1135);+#1135 = CARTESIAN_POINT('',(0.775,-0.7,0.9));+#1136 = LINE('',#1137,#1138);+#1137 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1138 = VECTOR('',#1139,1.);+#1139 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1140 = ORIENTED_EDGE('',*,*,#1141,.T.);+#1141 = EDGE_CURVE('',#1134,#1142,#1144,.T.);+#1142 = VERTEX_POINT('',#1143);+#1143 = CARTESIAN_POINT('',(0.775,-1.2,0.9));+#1144 = LINE('',#1145,#1146);+#1145 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1146 = VECTOR('',#1147,1.);+#1147 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1148 = ORIENTED_EDGE('',*,*,#1149,.T.);+#1149 = EDGE_CURVE('',#1142,#1150,#1152,.T.);+#1150 = VERTEX_POINT('',#1151);+#1151 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#1152 = LINE('',#1153,#1154);+#1153 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1154 = VECTOR('',#1155,1.);+#1155 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1156 = ORIENTED_EDGE('',*,*,#1157,.T.);+#1157 = EDGE_CURVE('',#1150,#1158,#1160,.T.);+#1158 = VERTEX_POINT('',#1159);+#1159 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#1160 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1161,#1162),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1161 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#1162 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#1163 = ORIENTED_EDGE('',*,*,#1164,.F.);+#1164 = EDGE_CURVE('',#1103,#1158,#1165,.T.);+#1165 = LINE('',#1166,#1167);+#1166 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#1167 = VECTOR('',#1168,1.);+#1168 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1169 = ORIENTED_EDGE('',*,*,#1102,.F.);+#1170 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1171,#1172)+ ,(#1173,#1174+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#1171 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1172 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#1173 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#1174 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#1175 = ADVANCED_FACE('',(#1176),#1208,.F.);+#1176 = FACE_BOUND('',#1177,.F.);+#1177 = EDGE_LOOP('',(#1178,#1186,#1194,#1200,#1206,#1207));+#1178 = ORIENTED_EDGE('',*,*,#1179,.F.);+#1179 = EDGE_CURVE('',#1180,#442,#1182,.T.);+#1180 = VERTEX_POINT('',#1181);+#1181 = CARTESIAN_POINT('',(0.85,1.2,0.9));+#1182 = LINE('',#1183,#1184);+#1183 = CARTESIAN_POINT('',(0.85,1.2,0.9));+#1184 = VECTOR('',#1185,1.);+#1185 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1186 = ORIENTED_EDGE('',*,*,#1187,.T.);+#1187 = EDGE_CURVE('',#1180,#1188,#1190,.T.);+#1188 = VERTEX_POINT('',#1189);+#1189 = CARTESIAN_POINT('',(0.85,0.7,0.9));+#1190 = LINE('',#1191,#1192);+#1191 = CARTESIAN_POINT('',(0.85,1.2,0.9));+#1192 = VECTOR('',#1193,1.);+#1193 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1194 = ORIENTED_EDGE('',*,*,#1195,.T.);+#1195 = EDGE_CURVE('',#1188,#786,#1196,.T.);+#1196 = LINE('',#1197,#1198);+#1197 = CARTESIAN_POINT('',(0.85,0.7,0.9));+#1198 = VECTOR('',#1199,1.);+#1199 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1200 = ORIENTED_EDGE('',*,*,#1201,.T.);+#1201 = EDGE_CURVE('',#786,#1126,#1202,.T.);+#1202 = LINE('',#1203,#1204);+#1203 = CARTESIAN_POINT('',(0.85,0.7,0.9));+#1204 = VECTOR('',#1205,1.);+#1205 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1206 = ORIENTED_EDGE('',*,*,#1125,.F.);+#1207 = ORIENTED_EDGE('',*,*,#449,.F.);+#1208 = PLANE('',#1209);+#1209 = AXIS2_PLACEMENT_3D('',#1210,#1211,#1212);+#1210 = CARTESIAN_POINT('',(0.85,1.2,0.9));+#1211 = DIRECTION('',(0.,0.,-1.));+#1212 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#1213 = ADVANCED_FACE('',(#1214),#1257,.F.);+#1214 = FACE_BOUND('',#1215,.F.);+#1215 = EDGE_LOOP('',(#1216,#1222,#1223,#1224,#1225,#1226,#1227,#1233,+ #1234,#1242,#1250,#1256));+#1216 = ORIENTED_EDGE('',*,*,#1217,.F.);+#1217 = EDGE_CURVE('',#848,#1142,#1218,.T.);+#1218 = LINE('',#1219,#1220);+#1219 = CARTESIAN_POINT('',(0.85,-1.2,0.9));+#1220 = VECTOR('',#1221,1.);+#1221 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1222 = ORIENTED_EDGE('',*,*,#863,.T.);+#1223 = ORIENTED_EDGE('',*,*,#908,.T.);+#1224 = ORIENTED_EDGE('',*,*,#925,.T.);+#1225 = ORIENTED_EDGE('',*,*,#879,.T.);+#1226 = ORIENTED_EDGE('',*,*,#551,.T.);+#1227 = ORIENTED_EDGE('',*,*,#1228,.T.);+#1228 = EDGE_CURVE('',#544,#988,#1229,.T.);+#1229 = LINE('',#1230,#1231);+#1230 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));+#1231 = VECTOR('',#1232,1.);+#1232 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1233 = ORIENTED_EDGE('',*,*,#985,.F.);+#1234 = ORIENTED_EDGE('',*,*,#1235,.F.);+#1235 = EDGE_CURVE('',#1236,#986,#1238,.T.);+#1236 = VERTEX_POINT('',#1237);+#1237 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#1238 = LINE('',#1239,#1240);+#1239 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#1240 = VECTOR('',#1241,1.);+#1241 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1242 = ORIENTED_EDGE('',*,*,#1243,.F.);+#1243 = EDGE_CURVE('',#1244,#1236,#1246,.T.);+#1244 = VERTEX_POINT('',#1245);+#1245 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#1246 = LINE('',#1247,#1248);+#1247 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#1248 = VECTOR('',#1249,1.);+#1249 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1250 = ORIENTED_EDGE('',*,*,#1251,.F.);+#1251 = EDGE_CURVE('',#1150,#1244,#1252,.T.);+#1252 = LINE('',#1253,#1254);+#1253 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#1254 = VECTOR('',#1255,1.);+#1255 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1256 = ORIENTED_EDGE('',*,*,#1149,.F.);+#1257 = PLANE('',#1258);+#1258 = AXIS2_PLACEMENT_3D('',#1259,#1260,#1261);+#1259 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));+#1260 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));+#1261 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));+#1262 = ADVANCED_FACE('',(#1263),#1349,.F.);+#1263 = FACE_BOUND('',#1264,.F.);+#1264 = EDGE_LOOP('',(#1265,#1266,#1267,#1276,#1284,#1293,#1301,#1309,+ #1317,#1326,#1334,#1343));+#1265 = ORIENTED_EDGE('',*,*,#543,.F.);+#1266 = ORIENTED_EDGE('',*,*,#565,.T.);+#1267 = ORIENTED_EDGE('',*,*,#1268,.T.);+#1268 = EDGE_CURVE('',#566,#1269,#1271,.T.);+#1269 = VERTEX_POINT('',#1270);+#1270 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767));+#1271 = CIRCLE('',#1272,0.1);+#1272 = AXIS2_PLACEMENT_3D('',#1273,#1274,#1275);+#1273 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));+#1274 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1275 = DIRECTION('',(0.,0.,1.));+#1276 = ORIENTED_EDGE('',*,*,#1277,.T.);+#1277 = EDGE_CURVE('',#1269,#1278,#1280,.T.);+#1278 = VERTEX_POINT('',#1279);+#1279 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583));+#1280 = LINE('',#1281,#1282);+#1281 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767));+#1282 = VECTOR('',#1283,1.);+#1283 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#1284 = ORIENTED_EDGE('',*,*,#1285,.T.);+#1285 = EDGE_CURVE('',#1278,#1286,#1288,.T.);+#1286 = VERTEX_POINT('',#1287);+#1287 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.));+#1288 = CIRCLE('',#1289,0.25);+#1289 = AXIS2_PLACEMENT_3D('',#1290,#1291,#1292);+#1290 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25));+#1291 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));+#1292 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#1293 = ORIENTED_EDGE('',*,*,#1294,.T.);+#1294 = EDGE_CURVE('',#1286,#1295,#1297,.T.);+#1295 = VERTEX_POINT('',#1296);+#1296 = CARTESIAN_POINT('',(-1.4,-1.2,0.));+#1297 = LINE('',#1298,#1299);+#1298 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.));+#1299 = VECTOR('',#1300,1.);+#1300 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1301 = ORIENTED_EDGE('',*,*,#1302,.T.);+#1302 = EDGE_CURVE('',#1295,#1303,#1305,.T.);+#1303 = VERTEX_POINT('',#1304);+#1304 = CARTESIAN_POINT('',(-1.4,-1.2,0.15));+#1305 = LINE('',#1306,#1307);+#1306 = CARTESIAN_POINT('',(-1.4,-1.2,0.));+#1307 = VECTOR('',#1308,1.);+#1308 = DIRECTION('',(0.,0.,1.));+#1309 = ORIENTED_EDGE('',*,*,#1310,.T.);+#1310 = EDGE_CURVE('',#1303,#1311,#1313,.T.);+#1311 = VERTEX_POINT('',#1312);+#1312 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15));+#1313 = LINE('',#1314,#1315);+#1314 = CARTESIAN_POINT('',(-1.4,-1.2,0.15));+#1315 = VECTOR('',#1316,1.);+#1316 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1317 = ORIENTED_EDGE('',*,*,#1318,.T.);+#1318 = EDGE_CURVE('',#1311,#1319,#1321,.T.);+#1319 = VERTEX_POINT('',#1320);+#1320 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233));+#1321 = CIRCLE('',#1322,0.1);+#1322 = AXIS2_PLACEMENT_3D('',#1323,#1324,#1325);+#1323 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25));+#1324 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1325 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#1326 = ORIENTED_EDGE('',*,*,#1327,.T.);+#1327 = EDGE_CURVE('',#1319,#1328,#1330,.T.);+#1328 = VERTEX_POINT('',#1329);+#1329 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417));+#1330 = LINE('',#1331,#1332);+#1331 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233));+#1332 = VECTOR('',#1333,1.);+#1333 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#1334 = ORIENTED_EDGE('',*,*,#1335,.T.);+#1335 = EDGE_CURVE('',#1328,#1336,#1338,.T.);+#1336 = VERTEX_POINT('',#1337);+#1337 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));+#1338 = CIRCLE('',#1339,0.25);+#1339 = AXIS2_PLACEMENT_3D('',#1340,#1341,#1342);+#1340 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));+#1341 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#1342 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1343 = ORIENTED_EDGE('',*,*,#1344,.T.);+#1344 = EDGE_CURVE('',#1336,#544,#1345,.T.);+#1345 = LINE('',#1346,#1347);+#1346 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));+#1347 = VECTOR('',#1348,1.);+#1348 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1349 = PLANE('',#1350);+#1350 = AXIS2_PLACEMENT_3D('',#1351,#1352,#1353);+#1351 = CARTESIAN_POINT('',(-1.069123385139,-1.2,0.441695635315));+#1352 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1353 = DIRECTION('',(0.,-0.,1.));+#1354 = ADVANCED_FACE('',(#1355),#1374,.F.);+#1355 = FACE_BOUND('',#1356,.F.);+#1356 = EDGE_LOOP('',(#1357,#1358,#1367,#1373));+#1357 = ORIENTED_EDGE('',*,*,#582,.T.);+#1358 = ORIENTED_EDGE('',*,*,#1359,.T.);+#1359 = EDGE_CURVE('',#575,#1360,#1362,.T.);+#1360 = VERTEX_POINT('',#1361);+#1361 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767));+#1362 = CIRCLE('',#1363,0.1);+#1363 = AXIS2_PLACEMENT_3D('',#1364,#1365,#1366);+#1364 = CARTESIAN_POINT('',(-0.85,-0.7,0.65));+#1365 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1366 = DIRECTION('',(0.,0.,1.));+#1367 = ORIENTED_EDGE('',*,*,#1368,.F.);+#1368 = EDGE_CURVE('',#1269,#1360,#1369,.T.);+#1369 = LINE('',#1370,#1371);+#1370 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767));+#1371 = VECTOR('',#1372,1.);+#1372 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1373 = ORIENTED_EDGE('',*,*,#1268,.F.);+#1374 = CYLINDRICAL_SURFACE('',#1375,0.1);+#1375 = AXIS2_PLACEMENT_3D('',#1376,#1377,#1378);+#1376 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));+#1377 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1378 = DIRECTION('',(0.,0.,1.));+#1379 = ADVANCED_FACE('',(#1380),#1458,.T.);+#1380 = FACE_BOUND('',#1381,.T.);+#1381 = EDGE_LOOP('',(#1382,#1383,#1384,#1385,#1393,#1402,#1410,#1418,+ #1426,#1435,#1443,#1452));+#1382 = ORIENTED_EDGE('',*,*,#596,.F.);+#1383 = ORIENTED_EDGE('',*,*,#574,.T.);+#1384 = ORIENTED_EDGE('',*,*,#1359,.T.);+#1385 = ORIENTED_EDGE('',*,*,#1386,.T.);+#1386 = EDGE_CURVE('',#1360,#1387,#1389,.T.);+#1387 = VERTEX_POINT('',#1388);+#1388 = CARTESIAN_POINT('',(-1.02432885403,-0.7,0.206587955583));+#1389 = LINE('',#1390,#1391);+#1390 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767));+#1391 = VECTOR('',#1392,1.);+#1392 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#1393 = ORIENTED_EDGE('',*,*,#1394,.T.);+#1394 = EDGE_CURVE('',#1387,#1395,#1397,.T.);+#1395 = VERTEX_POINT('',#1396);+#1396 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.));+#1397 = CIRCLE('',#1398,0.25);+#1398 = AXIS2_PLACEMENT_3D('',#1399,#1400,#1401);+#1399 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25));+#1400 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));+#1401 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#1402 = ORIENTED_EDGE('',*,*,#1403,.T.);+#1403 = EDGE_CURVE('',#1395,#1404,#1406,.T.);+#1404 = VERTEX_POINT('',#1405);+#1405 = CARTESIAN_POINT('',(-1.4,-0.7,0.));+#1406 = LINE('',#1407,#1408);+#1407 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.));+#1408 = VECTOR('',#1409,1.);+#1409 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1410 = ORIENTED_EDGE('',*,*,#1411,.T.);+#1411 = EDGE_CURVE('',#1404,#1412,#1414,.T.);+#1412 = VERTEX_POINT('',#1413);+#1413 = CARTESIAN_POINT('',(-1.4,-0.7,0.15));+#1414 = LINE('',#1415,#1416);+#1415 = CARTESIAN_POINT('',(-1.4,-0.7,0.));+#1416 = VECTOR('',#1417,1.);+#1417 = DIRECTION('',(0.,0.,1.));+#1418 = ORIENTED_EDGE('',*,*,#1419,.T.);+#1419 = EDGE_CURVE('',#1412,#1420,#1422,.T.);+#1420 = VERTEX_POINT('',#1421);+#1421 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.15));+#1422 = LINE('',#1423,#1424);+#1423 = CARTESIAN_POINT('',(-1.4,-0.7,0.15));+#1424 = VECTOR('',#1425,1.);+#1425 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1426 = ORIENTED_EDGE('',*,*,#1427,.T.);+#1427 = EDGE_CURVE('',#1420,#1428,#1430,.T.);+#1428 = VERTEX_POINT('',#1429);+#1429 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233));+#1430 = CIRCLE('',#1431,0.1);+#1431 = AXIS2_PLACEMENT_3D('',#1432,#1433,#1434);+#1432 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25));+#1433 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1434 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#1435 = ORIENTED_EDGE('',*,*,#1436,.T.);+#1436 = EDGE_CURVE('',#1428,#1437,#1439,.T.);+#1437 = VERTEX_POINT('',#1438);+#1438 = CARTESIAN_POINT('',(-1.096201938253,-0.7,0.693412044417));+#1439 = LINE('',#1440,#1441);+#1440 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233));+#1441 = VECTOR('',#1442,1.);+#1442 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#1443 = ORIENTED_EDGE('',*,*,#1444,.T.);+#1444 = EDGE_CURVE('',#1437,#1445,#1447,.T.);+#1445 = VERTEX_POINT('',#1446);+#1446 = CARTESIAN_POINT('',(-0.85,-0.7,0.9));+#1447 = CIRCLE('',#1448,0.25);+#1448 = AXIS2_PLACEMENT_3D('',#1449,#1450,#1451);+#1449 = CARTESIAN_POINT('',(-0.85,-0.7,0.65));+#1450 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#1451 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1452 = ORIENTED_EDGE('',*,*,#1453,.T.);+#1453 = EDGE_CURVE('',#1445,#597,#1454,.T.);+#1454 = LINE('',#1455,#1456);+#1455 = CARTESIAN_POINT('',(-0.85,-0.7,0.9));+#1456 = VECTOR('',#1457,1.);+#1457 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1458 = PLANE('',#1459);+#1459 = AXIS2_PLACEMENT_3D('',#1460,#1461,#1462);+#1460 = CARTESIAN_POINT('',(-1.069123385139,-0.7,0.441695635315));+#1461 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1462 = DIRECTION('',(0.,-0.,1.));+#1463 = ADVANCED_FACE('',(#1464),#1480,.F.);+#1464 = FACE_BOUND('',#1465,.F.);+#1465 = EDGE_LOOP('',(#1466,#1467,#1473,#1474));+#1466 = ORIENTED_EDGE('',*,*,#613,.T.);+#1467 = ORIENTED_EDGE('',*,*,#1468,.T.);+#1468 = EDGE_CURVE('',#606,#1004,#1469,.T.);+#1469 = LINE('',#1470,#1471);+#1470 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#1471 = VECTOR('',#1472,1.);+#1472 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1473 = ORIENTED_EDGE('',*,*,#1003,.F.);+#1474 = ORIENTED_EDGE('',*,*,#1475,.F.);+#1475 = EDGE_CURVE('',#597,#996,#1476,.T.);+#1476 = LINE('',#1477,#1478);+#1477 = CARTESIAN_POINT('',(-0.85,-0.7,0.9));+#1478 = VECTOR('',#1479,1.);+#1479 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1480 = PLANE('',#1481);+#1481 = AXIS2_PLACEMENT_3D('',#1482,#1483,#1484);+#1482 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));+#1483 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));+#1484 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));+#1485 = ADVANCED_FACE('',(#1486),#1572,.F.);+#1486 = FACE_BOUND('',#1487,.F.);+#1487 = EDGE_LOOP('',(#1488,#1489,#1490,#1499,#1507,#1516,#1524,#1532,+ #1540,#1549,#1557,#1566));+#1488 = ORIENTED_EDGE('',*,*,#605,.F.);+#1489 = ORIENTED_EDGE('',*,*,#627,.T.);+#1490 = ORIENTED_EDGE('',*,*,#1491,.T.);+#1491 = EDGE_CURVE('',#628,#1492,#1494,.T.);+#1492 = VERTEX_POINT('',#1493);+#1493 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767));+#1494 = CIRCLE('',#1495,0.1);+#1495 = AXIS2_PLACEMENT_3D('',#1496,#1497,#1498);+#1496 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));+#1497 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1498 = DIRECTION('',(0.,0.,1.));+#1499 = ORIENTED_EDGE('',*,*,#1500,.T.);+#1500 = EDGE_CURVE('',#1492,#1501,#1503,.T.);+#1501 = VERTEX_POINT('',#1502);+#1502 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583));+#1503 = LINE('',#1504,#1505);+#1504 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767));+#1505 = VECTOR('',#1506,1.);+#1506 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#1507 = ORIENTED_EDGE('',*,*,#1508,.T.);+#1508 = EDGE_CURVE('',#1501,#1509,#1511,.T.);+#1509 = VERTEX_POINT('',#1510);+#1510 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.));+#1511 = CIRCLE('',#1512,0.25);+#1512 = AXIS2_PLACEMENT_3D('',#1513,#1514,#1515);+#1513 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25));+#1514 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));+#1515 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#1516 = ORIENTED_EDGE('',*,*,#1517,.T.);+#1517 = EDGE_CURVE('',#1509,#1518,#1520,.T.);+#1518 = VERTEX_POINT('',#1519);+#1519 = CARTESIAN_POINT('',(-1.4,-0.25,0.));+#1520 = LINE('',#1521,#1522);+#1521 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.));+#1522 = VECTOR('',#1523,1.);+#1523 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1524 = ORIENTED_EDGE('',*,*,#1525,.T.);+#1525 = EDGE_CURVE('',#1518,#1526,#1528,.T.);+#1526 = VERTEX_POINT('',#1527);+#1527 = CARTESIAN_POINT('',(-1.4,-0.25,0.15));+#1528 = LINE('',#1529,#1530);+#1529 = CARTESIAN_POINT('',(-1.4,-0.25,0.));+#1530 = VECTOR('',#1531,1.);+#1531 = DIRECTION('',(0.,0.,1.));+#1532 = ORIENTED_EDGE('',*,*,#1533,.T.);+#1533 = EDGE_CURVE('',#1526,#1534,#1536,.T.);+#1534 = VERTEX_POINT('',#1535);+#1535 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15));+#1536 = LINE('',#1537,#1538);+#1537 = CARTESIAN_POINT('',(-1.4,-0.25,0.15));+#1538 = VECTOR('',#1539,1.);+#1539 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1540 = ORIENTED_EDGE('',*,*,#1541,.T.);+#1541 = EDGE_CURVE('',#1534,#1542,#1544,.T.);+#1542 = VERTEX_POINT('',#1543);+#1543 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233));+#1544 = CIRCLE('',#1545,0.1);+#1545 = AXIS2_PLACEMENT_3D('',#1546,#1547,#1548);+#1546 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25));+#1547 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1548 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#1549 = ORIENTED_EDGE('',*,*,#1550,.T.);+#1550 = EDGE_CURVE('',#1542,#1551,#1553,.T.);+#1551 = VERTEX_POINT('',#1552);+#1552 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417));+#1553 = LINE('',#1554,#1555);+#1554 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233));+#1555 = VECTOR('',#1556,1.);+#1556 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#1557 = ORIENTED_EDGE('',*,*,#1558,.T.);+#1558 = EDGE_CURVE('',#1551,#1559,#1561,.T.);+#1559 = VERTEX_POINT('',#1560);+#1560 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#1561 = CIRCLE('',#1562,0.25);+#1562 = AXIS2_PLACEMENT_3D('',#1563,#1564,#1565);+#1563 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));+#1564 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#1565 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1566 = ORIENTED_EDGE('',*,*,#1567,.T.);+#1567 = EDGE_CURVE('',#1559,#606,#1568,.T.);+#1568 = LINE('',#1569,#1570);+#1569 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#1570 = VECTOR('',#1571,1.);+#1571 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1572 = PLANE('',#1573);+#1573 = AXIS2_PLACEMENT_3D('',#1574,#1575,#1576);+#1574 = CARTESIAN_POINT('',(-1.069123385139,-0.25,0.441695635315));+#1575 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1576 = DIRECTION('',(0.,-0.,1.));+#1577 = ADVANCED_FACE('',(#1578),#1597,.F.);+#1578 = FACE_BOUND('',#1579,.F.);+#1579 = EDGE_LOOP('',(#1580,#1581,#1590,#1596));+#1580 = ORIENTED_EDGE('',*,*,#644,.T.);+#1581 = ORIENTED_EDGE('',*,*,#1582,.T.);+#1582 = EDGE_CURVE('',#637,#1583,#1585,.T.);+#1583 = VERTEX_POINT('',#1584);+#1584 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767));+#1585 = CIRCLE('',#1586,0.1);+#1586 = AXIS2_PLACEMENT_3D('',#1587,#1588,#1589);+#1587 = CARTESIAN_POINT('',(-0.85,0.25,0.65));+#1588 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1589 = DIRECTION('',(0.,0.,1.));+#1590 = ORIENTED_EDGE('',*,*,#1591,.F.);+#1591 = EDGE_CURVE('',#1492,#1583,#1592,.T.);+#1592 = LINE('',#1593,#1594);+#1593 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767));+#1594 = VECTOR('',#1595,1.);+#1595 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1596 = ORIENTED_EDGE('',*,*,#1491,.F.);+#1597 = CYLINDRICAL_SURFACE('',#1598,0.1);+#1598 = AXIS2_PLACEMENT_3D('',#1599,#1600,#1601);+#1599 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));+#1600 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1601 = DIRECTION('',(0.,0.,1.));+#1602 = ADVANCED_FACE('',(#1603),#1681,.T.);+#1603 = FACE_BOUND('',#1604,.T.);+#1604 = EDGE_LOOP('',(#1605,#1606,#1607,#1608,#1616,#1625,#1633,#1641,+ #1649,#1658,#1666,#1675));+#1605 = ORIENTED_EDGE('',*,*,#658,.F.);+#1606 = ORIENTED_EDGE('',*,*,#636,.T.);+#1607 = ORIENTED_EDGE('',*,*,#1582,.T.);+#1608 = ORIENTED_EDGE('',*,*,#1609,.T.);+#1609 = EDGE_CURVE('',#1583,#1610,#1612,.T.);+#1610 = VERTEX_POINT('',#1611);+#1611 = CARTESIAN_POINT('',(-1.02432885403,0.25,0.206587955583));+#1612 = LINE('',#1613,#1614);+#1613 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767));+#1614 = VECTOR('',#1615,1.);+#1615 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#1616 = ORIENTED_EDGE('',*,*,#1617,.T.);+#1617 = EDGE_CURVE('',#1610,#1618,#1620,.T.);+#1618 = VERTEX_POINT('',#1619);+#1619 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.));+#1620 = CIRCLE('',#1621,0.25);+#1621 = AXIS2_PLACEMENT_3D('',#1622,#1623,#1624);+#1622 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25));+#1623 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));+#1624 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#1625 = ORIENTED_EDGE('',*,*,#1626,.T.);+#1626 = EDGE_CURVE('',#1618,#1627,#1629,.T.);+#1627 = VERTEX_POINT('',#1628);+#1628 = CARTESIAN_POINT('',(-1.4,0.25,0.));+#1629 = LINE('',#1630,#1631);+#1630 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.));+#1631 = VECTOR('',#1632,1.);+#1632 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1633 = ORIENTED_EDGE('',*,*,#1634,.T.);+#1634 = EDGE_CURVE('',#1627,#1635,#1637,.T.);+#1635 = VERTEX_POINT('',#1636);+#1636 = CARTESIAN_POINT('',(-1.4,0.25,0.15));+#1637 = LINE('',#1638,#1639);+#1638 = CARTESIAN_POINT('',(-1.4,0.25,0.));+#1639 = VECTOR('',#1640,1.);+#1640 = DIRECTION('',(0.,0.,1.));+#1641 = ORIENTED_EDGE('',*,*,#1642,.T.);+#1642 = EDGE_CURVE('',#1635,#1643,#1645,.T.);+#1643 = VERTEX_POINT('',#1644);+#1644 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.15));+#1645 = LINE('',#1646,#1647);+#1646 = CARTESIAN_POINT('',(-1.4,0.25,0.15));+#1647 = VECTOR('',#1648,1.);+#1648 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1649 = ORIENTED_EDGE('',*,*,#1650,.T.);+#1650 = EDGE_CURVE('',#1643,#1651,#1653,.T.);+#1651 = VERTEX_POINT('',#1652);+#1652 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233));+#1653 = CIRCLE('',#1654,0.1);+#1654 = AXIS2_PLACEMENT_3D('',#1655,#1656,#1657);+#1655 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25));+#1656 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1657 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#1658 = ORIENTED_EDGE('',*,*,#1659,.T.);+#1659 = EDGE_CURVE('',#1651,#1660,#1662,.T.);+#1660 = VERTEX_POINT('',#1661);+#1661 = CARTESIAN_POINT('',(-1.096201938253,0.25,0.693412044417));+#1662 = LINE('',#1663,#1664);+#1663 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233));+#1664 = VECTOR('',#1665,1.);+#1665 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#1666 = ORIENTED_EDGE('',*,*,#1667,.T.);+#1667 = EDGE_CURVE('',#1660,#1668,#1670,.T.);+#1668 = VERTEX_POINT('',#1669);+#1669 = CARTESIAN_POINT('',(-0.85,0.25,0.9));+#1670 = CIRCLE('',#1671,0.25);+#1671 = AXIS2_PLACEMENT_3D('',#1672,#1673,#1674);+#1672 = CARTESIAN_POINT('',(-0.85,0.25,0.65));+#1673 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#1674 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1675 = ORIENTED_EDGE('',*,*,#1676,.T.);+#1676 = EDGE_CURVE('',#1668,#659,#1677,.T.);+#1677 = LINE('',#1678,#1679);+#1678 = CARTESIAN_POINT('',(-0.85,0.25,0.9));+#1679 = VECTOR('',#1680,1.);+#1680 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1681 = PLANE('',#1682);+#1682 = AXIS2_PLACEMENT_3D('',#1683,#1684,#1685);+#1683 = CARTESIAN_POINT('',(-1.069123385139,0.25,0.441695635315));+#1684 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1685 = DIRECTION('',(0.,-0.,1.));+#1686 = ADVANCED_FACE('',(#1687),#1698,.F.);+#1687 = FACE_BOUND('',#1688,.F.);+#1688 = EDGE_LOOP('',(#1689,#1690,#1691,#1692));+#1689 = ORIENTED_EDGE('',*,*,#675,.T.);+#1690 = ORIENTED_EDGE('',*,*,#971,.T.);+#1691 = ORIENTED_EDGE('',*,*,#1019,.F.);+#1692 = ORIENTED_EDGE('',*,*,#1693,.F.);+#1693 = EDGE_CURVE('',#659,#1012,#1694,.T.);+#1694 = LINE('',#1695,#1696);+#1695 = CARTESIAN_POINT('',(-0.85,0.25,0.9));+#1696 = VECTOR('',#1697,1.);+#1697 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1698 = PLANE('',#1699);+#1699 = AXIS2_PLACEMENT_3D('',#1700,#1701,#1702);+#1700 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));+#1701 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));+#1702 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));+#1703 = ADVANCED_FACE('',(#1704),#1783,.F.);+#1704 = FACE_BOUND('',#1705,.F.);+#1705 = EDGE_LOOP('',(#1706,#1707,#1708,#1717,#1725,#1734,#1742,#1750,+ #1758,#1767,#1775,#1782));+#1706 = ORIENTED_EDGE('',*,*,#667,.F.);+#1707 = ORIENTED_EDGE('',*,*,#689,.T.);+#1708 = ORIENTED_EDGE('',*,*,#1709,.T.);+#1709 = EDGE_CURVE('',#690,#1710,#1712,.T.);+#1710 = VERTEX_POINT('',#1711);+#1711 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767));+#1712 = CIRCLE('',#1713,0.1);+#1713 = AXIS2_PLACEMENT_3D('',#1714,#1715,#1716);+#1714 = CARTESIAN_POINT('',(-0.85,0.7,0.65));+#1715 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1716 = DIRECTION('',(0.,0.,1.));+#1717 = ORIENTED_EDGE('',*,*,#1718,.T.);+#1718 = EDGE_CURVE('',#1710,#1719,#1721,.T.);+#1719 = VERTEX_POINT('',#1720);+#1720 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583));+#1721 = LINE('',#1722,#1723);+#1722 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767));+#1723 = VECTOR('',#1724,1.);+#1724 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#1725 = ORIENTED_EDGE('',*,*,#1726,.T.);+#1726 = EDGE_CURVE('',#1719,#1727,#1729,.T.);+#1727 = VERTEX_POINT('',#1728);+#1728 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.));+#1729 = CIRCLE('',#1730,0.25);+#1730 = AXIS2_PLACEMENT_3D('',#1731,#1732,#1733);+#1731 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25));+#1732 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));+#1733 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#1734 = ORIENTED_EDGE('',*,*,#1735,.T.);+#1735 = EDGE_CURVE('',#1727,#1736,#1738,.T.);+#1736 = VERTEX_POINT('',#1737);+#1737 = CARTESIAN_POINT('',(-1.4,0.7,0.));+#1738 = LINE('',#1739,#1740);+#1739 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.));+#1740 = VECTOR('',#1741,1.);+#1741 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1742 = ORIENTED_EDGE('',*,*,#1743,.T.);+#1743 = EDGE_CURVE('',#1736,#1744,#1746,.T.);+#1744 = VERTEX_POINT('',#1745);+#1745 = CARTESIAN_POINT('',(-1.4,0.7,0.15));+#1746 = LINE('',#1747,#1748);+#1747 = CARTESIAN_POINT('',(-1.4,0.7,0.));+#1748 = VECTOR('',#1749,1.);+#1749 = DIRECTION('',(0.,0.,1.));+#1750 = ORIENTED_EDGE('',*,*,#1751,.T.);+#1751 = EDGE_CURVE('',#1744,#1752,#1754,.T.);+#1752 = VERTEX_POINT('',#1753);+#1753 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15));+#1754 = LINE('',#1755,#1756);+#1755 = CARTESIAN_POINT('',(-1.4,0.7,0.15));+#1756 = VECTOR('',#1757,1.);+#1757 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1758 = ORIENTED_EDGE('',*,*,#1759,.T.);+#1759 = EDGE_CURVE('',#1752,#1760,#1762,.T.);+#1760 = VERTEX_POINT('',#1761);+#1761 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233));+#1762 = CIRCLE('',#1763,0.1);+#1763 = AXIS2_PLACEMENT_3D('',#1764,#1765,#1766);+#1764 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25));+#1765 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1766 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#1767 = ORIENTED_EDGE('',*,*,#1768,.T.);+#1768 = EDGE_CURVE('',#1760,#1769,#1771,.T.);+#1769 = VERTEX_POINT('',#1770);+#1770 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417));+#1771 = LINE('',#1772,#1773);+#1772 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233));+#1773 = VECTOR('',#1774,1.);+#1774 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#1775 = ORIENTED_EDGE('',*,*,#1776,.T.);+#1776 = EDGE_CURVE('',#1769,#941,#1777,.T.);+#1777 = CIRCLE('',#1778,0.25);+#1778 = AXIS2_PLACEMENT_3D('',#1779,#1780,#1781);+#1779 = CARTESIAN_POINT('',(-0.85,0.7,0.65));+#1780 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#1781 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1782 = ORIENTED_EDGE('',*,*,#940,.T.);+#1783 = PLANE('',#1784);+#1784 = AXIS2_PLACEMENT_3D('',#1785,#1786,#1787);+#1785 = CARTESIAN_POINT('',(-1.069123385139,0.7,0.441695635315));+#1786 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1787 = DIRECTION('',(0.,-0.,1.));+#1788 = ADVANCED_FACE('',(#1789),#1808,.F.);+#1789 = FACE_BOUND('',#1790,.F.);+#1790 = EDGE_LOOP('',(#1791,#1792,#1801,#1807));+#1791 = ORIENTED_EDGE('',*,*,#706,.T.);+#1792 = ORIENTED_EDGE('',*,*,#1793,.T.);+#1793 = EDGE_CURVE('',#699,#1794,#1796,.T.);+#1794 = VERTEX_POINT('',#1795);+#1795 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767));+#1796 = CIRCLE('',#1797,0.1);+#1797 = AXIS2_PLACEMENT_3D('',#1798,#1799,#1800);+#1798 = CARTESIAN_POINT('',(-0.85,1.2,0.65));+#1799 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1800 = DIRECTION('',(0.,0.,1.));+#1801 = ORIENTED_EDGE('',*,*,#1802,.F.);+#1802 = EDGE_CURVE('',#1710,#1794,#1803,.T.);+#1803 = LINE('',#1804,#1805);+#1804 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767));+#1805 = VECTOR('',#1806,1.);+#1806 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1807 = ORIENTED_EDGE('',*,*,#1709,.F.);+#1808 = CYLINDRICAL_SURFACE('',#1809,0.1);+#1809 = AXIS2_PLACEMENT_3D('',#1810,#1811,#1812);+#1810 = CARTESIAN_POINT('',(-0.85,0.7,0.65));+#1811 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1812 = DIRECTION('',(0.,0.,1.));+#1813 = ADVANCED_FACE('',(#1814),#1885,.T.);+#1814 = FACE_BOUND('',#1815,.T.);+#1815 = EDGE_LOOP('',(#1816,#1817,#1818,#1819,#1827,#1836,#1844,#1852,+ #1860,#1869,#1877,#1884));+#1816 = ORIENTED_EDGE('',*,*,#720,.F.);+#1817 = ORIENTED_EDGE('',*,*,#698,.T.);+#1818 = ORIENTED_EDGE('',*,*,#1793,.T.);+#1819 = ORIENTED_EDGE('',*,*,#1820,.T.);+#1820 = EDGE_CURVE('',#1794,#1821,#1823,.T.);+#1821 = VERTEX_POINT('',#1822);+#1822 = CARTESIAN_POINT('',(-1.02432885403,1.2,0.206587955583));+#1823 = LINE('',#1824,#1825);+#1824 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767));+#1825 = VECTOR('',#1826,1.);+#1826 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#1827 = ORIENTED_EDGE('',*,*,#1828,.T.);+#1828 = EDGE_CURVE('',#1821,#1829,#1831,.T.);+#1829 = VERTEX_POINT('',#1830);+#1830 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.));+#1831 = CIRCLE('',#1832,0.25);+#1832 = AXIS2_PLACEMENT_3D('',#1833,#1834,#1835);+#1833 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25));+#1834 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));+#1835 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#1836 = ORIENTED_EDGE('',*,*,#1837,.T.);+#1837 = EDGE_CURVE('',#1829,#1838,#1840,.T.);+#1838 = VERTEX_POINT('',#1839);+#1839 = CARTESIAN_POINT('',(-1.4,1.2,0.));+#1840 = LINE('',#1841,#1842);+#1841 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.));+#1842 = VECTOR('',#1843,1.);+#1843 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1844 = ORIENTED_EDGE('',*,*,#1845,.T.);+#1845 = EDGE_CURVE('',#1838,#1846,#1848,.T.);+#1846 = VERTEX_POINT('',#1847);+#1847 = CARTESIAN_POINT('',(-1.4,1.2,0.15));+#1848 = LINE('',#1849,#1850);+#1849 = CARTESIAN_POINT('',(-1.4,1.2,0.));+#1850 = VECTOR('',#1851,1.);+#1851 = DIRECTION('',(0.,0.,1.));+#1852 = ORIENTED_EDGE('',*,*,#1853,.T.);+#1853 = EDGE_CURVE('',#1846,#1854,#1856,.T.);+#1854 = VERTEX_POINT('',#1855);+#1855 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.15));+#1856 = LINE('',#1857,#1858);+#1857 = CARTESIAN_POINT('',(-1.4,1.2,0.15));+#1858 = VECTOR('',#1859,1.);+#1859 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1860 = ORIENTED_EDGE('',*,*,#1861,.T.);+#1861 = EDGE_CURVE('',#1854,#1862,#1864,.T.);+#1862 = VERTEX_POINT('',#1863);+#1863 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233));+#1864 = CIRCLE('',#1865,0.1);+#1865 = AXIS2_PLACEMENT_3D('',#1866,#1867,#1868);+#1866 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25));+#1867 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1868 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#1869 = ORIENTED_EDGE('',*,*,#1870,.T.);+#1870 = EDGE_CURVE('',#1862,#1871,#1873,.T.);+#1871 = VERTEX_POINT('',#1872);+#1872 = CARTESIAN_POINT('',(-1.096201938253,1.2,0.693412044417));+#1873 = LINE('',#1874,#1875);+#1874 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233));+#1875 = VECTOR('',#1876,1.);+#1876 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#1877 = ORIENTED_EDGE('',*,*,#1878,.T.);+#1878 = EDGE_CURVE('',#1871,#949,#1879,.T.);+#1879 = CIRCLE('',#1880,0.25);+#1880 = AXIS2_PLACEMENT_3D('',#1881,#1882,#1883);+#1881 = CARTESIAN_POINT('',(-0.85,1.2,0.65));+#1882 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#1883 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1884 = ORIENTED_EDGE('',*,*,#956,.T.);+#1885 = PLANE('',#1886);+#1886 = AXIS2_PLACEMENT_3D('',#1887,#1888,#1889);+#1887 = CARTESIAN_POINT('',(-1.069123385139,1.2,0.441695635315));+#1888 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1889 = DIRECTION('',(0.,-0.,1.));+#1890 = ADVANCED_FACE('',(#1891),#1970,.F.);+#1891 = FACE_BOUND('',#1892,.F.);+#1892 = EDGE_LOOP('',(#1893,#1894,#1895,#1904,#1912,#1921,#1929,#1937,+ #1945,#1954,#1962,#1969));+#1893 = ORIENTED_EDGE('',*,*,#739,.F.);+#1894 = ORIENTED_EDGE('',*,*,#754,.T.);+#1895 = ORIENTED_EDGE('',*,*,#1896,.T.);+#1896 = EDGE_CURVE('',#755,#1897,#1899,.T.);+#1897 = VERTEX_POINT('',#1898);+#1898 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767));+#1899 = CIRCLE('',#1900,0.1);+#1900 = AXIS2_PLACEMENT_3D('',#1901,#1902,#1903);+#1901 = CARTESIAN_POINT('',(0.85,1.2,0.65));+#1902 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1903 = DIRECTION('',(0.,0.,1.));+#1904 = ORIENTED_EDGE('',*,*,#1905,.T.);+#1905 = EDGE_CURVE('',#1897,#1906,#1908,.T.);+#1906 = VERTEX_POINT('',#1907);+#1907 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583));+#1908 = LINE('',#1909,#1910);+#1909 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767));+#1910 = VECTOR('',#1911,1.);+#1911 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)+ );+#1912 = ORIENTED_EDGE('',*,*,#1913,.T.);+#1913 = EDGE_CURVE('',#1906,#1914,#1916,.T.);+#1914 = VERTEX_POINT('',#1915);+#1915 = CARTESIAN_POINT('',(1.270530792283,1.2,0.));+#1916 = CIRCLE('',#1917,0.25);+#1917 = AXIS2_PLACEMENT_3D('',#1918,#1919,#1920);+#1918 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25));+#1919 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1920 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#1921 = ORIENTED_EDGE('',*,*,#1922,.T.);+#1922 = EDGE_CURVE('',#1914,#1923,#1925,.T.);+#1923 = VERTEX_POINT('',#1924);+#1924 = CARTESIAN_POINT('',(1.4,1.2,0.));+#1925 = LINE('',#1926,#1927);+#1926 = CARTESIAN_POINT('',(1.270530792283,1.2,0.));+#1927 = VECTOR('',#1928,1.);+#1928 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1929 = ORIENTED_EDGE('',*,*,#1930,.T.);+#1930 = EDGE_CURVE('',#1923,#1931,#1933,.T.);+#1931 = VERTEX_POINT('',#1932);+#1932 = CARTESIAN_POINT('',(1.4,1.2,0.15));+#1933 = LINE('',#1934,#1935);+#1934 = CARTESIAN_POINT('',(1.4,1.2,0.));+#1935 = VECTOR('',#1936,1.);+#1936 = DIRECTION('',(0.,0.,1.));+#1937 = ORIENTED_EDGE('',*,*,#1938,.T.);+#1938 = EDGE_CURVE('',#1931,#1939,#1941,.T.);+#1939 = VERTEX_POINT('',#1940);+#1940 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15));+#1941 = LINE('',#1942,#1943);+#1942 = CARTESIAN_POINT('',(1.4,1.2,0.15));+#1943 = VECTOR('',#1944,1.);+#1944 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1945 = ORIENTED_EDGE('',*,*,#1946,.T.);+#1946 = EDGE_CURVE('',#1939,#1947,#1949,.T.);+#1947 = VERTEX_POINT('',#1948);+#1948 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233));+#1949 = CIRCLE('',#1950,0.1);+#1950 = AXIS2_PLACEMENT_3D('',#1951,#1952,#1953);+#1951 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25));+#1952 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1953 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#1954 = ORIENTED_EDGE('',*,*,#1955,.T.);+#1955 = EDGE_CURVE('',#1947,#1956,#1958,.T.);+#1956 = VERTEX_POINT('',#1957);+#1957 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417));+#1958 = LINE('',#1959,#1960);+#1959 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233));+#1960 = VECTOR('',#1961,1.);+#1961 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868+ ));+#1962 = ORIENTED_EDGE('',*,*,#1963,.T.);+#1963 = EDGE_CURVE('',#1956,#1180,#1964,.T.);+#1964 = CIRCLE('',#1965,0.25);+#1965 = AXIS2_PLACEMENT_3D('',#1966,#1967,#1968);+#1966 = CARTESIAN_POINT('',(0.85,1.2,0.65));+#1967 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1968 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1969 = ORIENTED_EDGE('',*,*,#1179,.T.);+#1970 = PLANE('',#1971);+#1971 = AXIS2_PLACEMENT_3D('',#1972,#1973,#1974);+#1972 = CARTESIAN_POINT('',(1.069123385139,1.2,0.441695635315));+#1973 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1974 = DIRECTION('',(0.,0.,1.));+#1975 = ADVANCED_FACE('',(#1976),#1995,.F.);+#1976 = FACE_BOUND('',#1977,.F.);+#1977 = EDGE_LOOP('',(#1978,#1979,#1988,#1994));+#1978 = ORIENTED_EDGE('',*,*,#771,.T.);+#1979 = ORIENTED_EDGE('',*,*,#1980,.T.);+#1980 = EDGE_CURVE('',#764,#1981,#1983,.T.);+#1981 = VERTEX_POINT('',#1982);+#1982 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767));+#1983 = CIRCLE('',#1984,0.1);+#1984 = AXIS2_PLACEMENT_3D('',#1985,#1986,#1987);+#1985 = CARTESIAN_POINT('',(0.85,0.7,0.65));+#1986 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1987 = DIRECTION('',(0.,0.,1.));+#1988 = ORIENTED_EDGE('',*,*,#1989,.F.);+#1989 = EDGE_CURVE('',#1897,#1981,#1990,.T.);+#1990 = LINE('',#1991,#1992);+#1991 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767));+#1992 = VECTOR('',#1993,1.);+#1993 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1994 = ORIENTED_EDGE('',*,*,#1896,.F.);+#1995 = CYLINDRICAL_SURFACE('',#1996,0.1);+#1996 = AXIS2_PLACEMENT_3D('',#1997,#1998,#1999);+#1997 = CARTESIAN_POINT('',(0.85,1.2,0.65));+#1998 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1999 = DIRECTION('',(0.,0.,1.));+#2000 = ADVANCED_FACE('',(#2001),#2072,.T.);+#2001 = FACE_BOUND('',#2002,.T.);+#2002 = EDGE_LOOP('',(#2003,#2004,#2005,#2006,#2014,#2023,#2031,#2039,+ #2047,#2056,#2064,#2071));+#2003 = ORIENTED_EDGE('',*,*,#785,.F.);+#2004 = ORIENTED_EDGE('',*,*,#763,.T.);+#2005 = ORIENTED_EDGE('',*,*,#1980,.T.);+#2006 = ORIENTED_EDGE('',*,*,#2007,.T.);+#2007 = EDGE_CURVE('',#1981,#2008,#2010,.T.);+#2008 = VERTEX_POINT('',#2009);+#2009 = CARTESIAN_POINT('',(1.02432885403,0.7,0.206587955583));+#2010 = LINE('',#2011,#2012);+#2011 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767));+#2012 = VECTOR('',#2013,1.);+#2013 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)+ );+#2014 = ORIENTED_EDGE('',*,*,#2015,.T.);+#2015 = EDGE_CURVE('',#2008,#2016,#2018,.T.);+#2016 = VERTEX_POINT('',#2017);+#2017 = CARTESIAN_POINT('',(1.270530792283,0.7,0.));+#2018 = CIRCLE('',#2019,0.25);+#2019 = AXIS2_PLACEMENT_3D('',#2020,#2021,#2022);+#2020 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25));+#2021 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2022 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#2023 = ORIENTED_EDGE('',*,*,#2024,.T.);+#2024 = EDGE_CURVE('',#2016,#2025,#2027,.T.);+#2025 = VERTEX_POINT('',#2026);+#2026 = CARTESIAN_POINT('',(1.4,0.7,0.));+#2027 = LINE('',#2028,#2029);+#2028 = CARTESIAN_POINT('',(1.270530792283,0.7,0.));+#2029 = VECTOR('',#2030,1.);+#2030 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2031 = ORIENTED_EDGE('',*,*,#2032,.T.);+#2032 = EDGE_CURVE('',#2025,#2033,#2035,.T.);+#2033 = VERTEX_POINT('',#2034);+#2034 = CARTESIAN_POINT('',(1.4,0.7,0.15));+#2035 = LINE('',#2036,#2037);+#2036 = CARTESIAN_POINT('',(1.4,0.7,0.));+#2037 = VECTOR('',#2038,1.);+#2038 = DIRECTION('',(0.,0.,1.));+#2039 = ORIENTED_EDGE('',*,*,#2040,.T.);+#2040 = EDGE_CURVE('',#2033,#2041,#2043,.T.);+#2041 = VERTEX_POINT('',#2042);+#2042 = CARTESIAN_POINT('',(1.270530792283,0.7,0.15));+#2043 = LINE('',#2044,#2045);+#2044 = CARTESIAN_POINT('',(1.4,0.7,0.15));+#2045 = VECTOR('',#2046,1.);+#2046 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2047 = ORIENTED_EDGE('',*,*,#2048,.T.);+#2048 = EDGE_CURVE('',#2041,#2049,#2051,.T.);+#2049 = VERTEX_POINT('',#2050);+#2050 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233));+#2051 = CIRCLE('',#2052,0.1);+#2052 = AXIS2_PLACEMENT_3D('',#2053,#2054,#2055);+#2053 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25));+#2054 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2055 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#2056 = ORIENTED_EDGE('',*,*,#2057,.T.);+#2057 = EDGE_CURVE('',#2049,#2058,#2060,.T.);+#2058 = VERTEX_POINT('',#2059);+#2059 = CARTESIAN_POINT('',(1.096201938253,0.7,0.693412044417));+#2060 = LINE('',#2061,#2062);+#2061 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233));+#2062 = VECTOR('',#2063,1.);+#2063 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868+ ));+#2064 = ORIENTED_EDGE('',*,*,#2065,.T.);+#2065 = EDGE_CURVE('',#2058,#1188,#2066,.T.);+#2066 = CIRCLE('',#2067,0.25);+#2067 = AXIS2_PLACEMENT_3D('',#2068,#2069,#2070);+#2068 = CARTESIAN_POINT('',(0.85,0.7,0.65));+#2069 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2070 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2071 = ORIENTED_EDGE('',*,*,#1195,.T.);+#2072 = PLANE('',#2073);+#2073 = AXIS2_PLACEMENT_3D('',#2074,#2075,#2076);+#2074 = CARTESIAN_POINT('',(1.069123385139,0.7,0.441695635315));+#2075 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2076 = DIRECTION('',(0.,0.,1.));+#2077 = ADVANCED_FACE('',(#2078),#2089,.F.);+#2078 = FACE_BOUND('',#2079,.F.);+#2079 = EDGE_LOOP('',(#2080,#2081,#2082,#2088));+#2080 = ORIENTED_EDGE('',*,*,#1201,.F.);+#2081 = ORIENTED_EDGE('',*,*,#802,.T.);+#2082 = ORIENTED_EDGE('',*,*,#2083,.T.);+#2083 = EDGE_CURVE('',#795,#1134,#2084,.T.);+#2084 = LINE('',#2085,#2086);+#2085 = CARTESIAN_POINT('',(0.85,-0.7,0.9));+#2086 = VECTOR('',#2087,1.);+#2087 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2088 = ORIENTED_EDGE('',*,*,#1133,.F.);+#2089 = PLANE('',#2090);+#2090 = AXIS2_PLACEMENT_3D('',#2091,#2092,#2093);+#2091 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));+#2092 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));+#2093 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));+#2094 = ADVANCED_FACE('',(#2095),#2181,.F.);+#2095 = FACE_BOUND('',#2096,.F.);+#2096 = EDGE_LOOP('',(#2097,#2098,#2099,#2108,#2116,#2125,#2133,#2141,+ #2149,#2158,#2166,#2175));+#2097 = ORIENTED_EDGE('',*,*,#794,.F.);+#2098 = ORIENTED_EDGE('',*,*,#816,.T.);+#2099 = ORIENTED_EDGE('',*,*,#2100,.T.);+#2100 = EDGE_CURVE('',#817,#2101,#2103,.T.);+#2101 = VERTEX_POINT('',#2102);+#2102 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767));+#2103 = CIRCLE('',#2104,0.1);+#2104 = AXIS2_PLACEMENT_3D('',#2105,#2106,#2107);+#2105 = CARTESIAN_POINT('',(0.85,-0.7,0.65));+#2106 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2107 = DIRECTION('',(0.,0.,1.));+#2108 = ORIENTED_EDGE('',*,*,#2109,.T.);+#2109 = EDGE_CURVE('',#2101,#2110,#2112,.T.);+#2110 = VERTEX_POINT('',#2111);+#2111 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583));+#2112 = LINE('',#2113,#2114);+#2113 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767));+#2114 = VECTOR('',#2115,1.);+#2115 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)+ );+#2116 = ORIENTED_EDGE('',*,*,#2117,.T.);+#2117 = EDGE_CURVE('',#2110,#2118,#2120,.T.);+#2118 = VERTEX_POINT('',#2119);+#2119 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.));+#2120 = CIRCLE('',#2121,0.25);+#2121 = AXIS2_PLACEMENT_3D('',#2122,#2123,#2124);+#2122 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25));+#2123 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2124 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#2125 = ORIENTED_EDGE('',*,*,#2126,.T.);+#2126 = EDGE_CURVE('',#2118,#2127,#2129,.T.);+#2127 = VERTEX_POINT('',#2128);+#2128 = CARTESIAN_POINT('',(1.4,-0.7,0.));+#2129 = LINE('',#2130,#2131);+#2130 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.));+#2131 = VECTOR('',#2132,1.);+#2132 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2133 = ORIENTED_EDGE('',*,*,#2134,.T.);+#2134 = EDGE_CURVE('',#2127,#2135,#2137,.T.);+#2135 = VERTEX_POINT('',#2136);+#2136 = CARTESIAN_POINT('',(1.4,-0.7,0.15));+#2137 = LINE('',#2138,#2139);+#2138 = CARTESIAN_POINT('',(1.4,-0.7,0.));+#2139 = VECTOR('',#2140,1.);+#2140 = DIRECTION('',(0.,0.,1.));+#2141 = ORIENTED_EDGE('',*,*,#2142,.T.);+#2142 = EDGE_CURVE('',#2135,#2143,#2145,.T.);+#2143 = VERTEX_POINT('',#2144);+#2144 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15));+#2145 = LINE('',#2146,#2147);+#2146 = CARTESIAN_POINT('',(1.4,-0.7,0.15));+#2147 = VECTOR('',#2148,1.);+#2148 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2149 = ORIENTED_EDGE('',*,*,#2150,.T.);+#2150 = EDGE_CURVE('',#2143,#2151,#2153,.T.);+#2151 = VERTEX_POINT('',#2152);+#2152 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233));+#2153 = CIRCLE('',#2154,0.1);+#2154 = AXIS2_PLACEMENT_3D('',#2155,#2156,#2157);+#2155 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25));+#2156 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2157 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#2158 = ORIENTED_EDGE('',*,*,#2159,.T.);+#2159 = EDGE_CURVE('',#2151,#2160,#2162,.T.);+#2160 = VERTEX_POINT('',#2161);+#2161 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417));+#2162 = LINE('',#2163,#2164);+#2163 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233));+#2164 = VECTOR('',#2165,1.);+#2165 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868+ ));+#2166 = ORIENTED_EDGE('',*,*,#2167,.T.);+#2167 = EDGE_CURVE('',#2160,#2168,#2170,.T.);+#2168 = VERTEX_POINT('',#2169);+#2169 = CARTESIAN_POINT('',(0.85,-0.7,0.9));+#2170 = CIRCLE('',#2171,0.25);+#2171 = AXIS2_PLACEMENT_3D('',#2172,#2173,#2174);+#2172 = CARTESIAN_POINT('',(0.85,-0.7,0.65));+#2173 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2174 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2175 = ORIENTED_EDGE('',*,*,#2176,.T.);+#2176 = EDGE_CURVE('',#2168,#795,#2177,.T.);+#2177 = LINE('',#2178,#2179);+#2178 = CARTESIAN_POINT('',(0.85,-0.7,0.9));+#2179 = VECTOR('',#2180,1.);+#2180 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2181 = PLANE('',#2182);+#2182 = AXIS2_PLACEMENT_3D('',#2183,#2184,#2185);+#2183 = CARTESIAN_POINT('',(1.069123385139,-0.7,0.441695635315));+#2184 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2185 = DIRECTION('',(0.,0.,1.));+#2186 = ADVANCED_FACE('',(#2187),#2206,.F.);+#2187 = FACE_BOUND('',#2188,.F.);+#2188 = EDGE_LOOP('',(#2189,#2190,#2199,#2205));+#2189 = ORIENTED_EDGE('',*,*,#833,.T.);+#2190 = ORIENTED_EDGE('',*,*,#2191,.T.);+#2191 = EDGE_CURVE('',#826,#2192,#2194,.T.);+#2192 = VERTEX_POINT('',#2193);+#2193 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767));+#2194 = CIRCLE('',#2195,0.1);+#2195 = AXIS2_PLACEMENT_3D('',#2196,#2197,#2198);+#2196 = CARTESIAN_POINT('',(0.85,-1.2,0.65));+#2197 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2198 = DIRECTION('',(0.,0.,1.));+#2199 = ORIENTED_EDGE('',*,*,#2200,.F.);+#2200 = EDGE_CURVE('',#2101,#2192,#2201,.T.);+#2201 = LINE('',#2202,#2203);+#2202 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767));+#2203 = VECTOR('',#2204,1.);+#2204 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2205 = ORIENTED_EDGE('',*,*,#2100,.F.);+#2206 = CYLINDRICAL_SURFACE('',#2207,0.1);+#2207 = AXIS2_PLACEMENT_3D('',#2208,#2209,#2210);+#2208 = CARTESIAN_POINT('',(0.85,-0.7,0.65));+#2209 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2210 = DIRECTION('',(0.,0.,1.));+#2211 = ADVANCED_FACE('',(#2212),#2290,.T.);+#2212 = FACE_BOUND('',#2213,.T.);+#2213 = EDGE_LOOP('',(#2214,#2215,#2216,#2217,#2225,#2234,#2242,#2250,+ #2258,#2267,#2275,#2284));+#2214 = ORIENTED_EDGE('',*,*,#847,.F.);+#2215 = ORIENTED_EDGE('',*,*,#825,.T.);+#2216 = ORIENTED_EDGE('',*,*,#2191,.T.);+#2217 = ORIENTED_EDGE('',*,*,#2218,.T.);+#2218 = EDGE_CURVE('',#2192,#2219,#2221,.T.);+#2219 = VERTEX_POINT('',#2220);+#2220 = CARTESIAN_POINT('',(1.02432885403,-1.2,0.206587955583));+#2221 = LINE('',#2222,#2223);+#2222 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767));+#2223 = VECTOR('',#2224,1.);+#2224 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)+ );+#2225 = ORIENTED_EDGE('',*,*,#2226,.T.);+#2226 = EDGE_CURVE('',#2219,#2227,#2229,.T.);+#2227 = VERTEX_POINT('',#2228);+#2228 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.));+#2229 = CIRCLE('',#2230,0.25);+#2230 = AXIS2_PLACEMENT_3D('',#2231,#2232,#2233);+#2231 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25));+#2232 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2233 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#2234 = ORIENTED_EDGE('',*,*,#2235,.T.);+#2235 = EDGE_CURVE('',#2227,#2236,#2238,.T.);+#2236 = VERTEX_POINT('',#2237);+#2237 = CARTESIAN_POINT('',(1.4,-1.2,0.));+#2238 = LINE('',#2239,#2240);+#2239 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.));+#2240 = VECTOR('',#2241,1.);+#2241 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2242 = ORIENTED_EDGE('',*,*,#2243,.T.);+#2243 = EDGE_CURVE('',#2236,#2244,#2246,.T.);+#2244 = VERTEX_POINT('',#2245);+#2245 = CARTESIAN_POINT('',(1.4,-1.2,0.15));+#2246 = LINE('',#2247,#2248);+#2247 = CARTESIAN_POINT('',(1.4,-1.2,0.));+#2248 = VECTOR('',#2249,1.);+#2249 = DIRECTION('',(0.,0.,1.));+#2250 = ORIENTED_EDGE('',*,*,#2251,.T.);+#2251 = EDGE_CURVE('',#2244,#2252,#2254,.T.);+#2252 = VERTEX_POINT('',#2253);+#2253 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.15));+#2254 = LINE('',#2255,#2256);+#2255 = CARTESIAN_POINT('',(1.4,-1.2,0.15));+#2256 = VECTOR('',#2257,1.);+#2257 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2258 = ORIENTED_EDGE('',*,*,#2259,.T.);+#2259 = EDGE_CURVE('',#2252,#2260,#2262,.T.);+#2260 = VERTEX_POINT('',#2261);+#2261 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233));+#2262 = CIRCLE('',#2263,0.1);+#2263 = AXIS2_PLACEMENT_3D('',#2264,#2265,#2266);+#2264 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25));+#2265 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2266 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#2267 = ORIENTED_EDGE('',*,*,#2268,.T.);+#2268 = EDGE_CURVE('',#2260,#2269,#2271,.T.);+#2269 = VERTEX_POINT('',#2270);+#2270 = CARTESIAN_POINT('',(1.096201938253,-1.2,0.693412044417));+#2271 = LINE('',#2272,#2273);+#2272 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233));+#2273 = VECTOR('',#2274,1.);+#2274 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868+ ));+#2275 = ORIENTED_EDGE('',*,*,#2276,.T.);+#2276 = EDGE_CURVE('',#2269,#2277,#2279,.T.);+#2277 = VERTEX_POINT('',#2278);+#2278 = CARTESIAN_POINT('',(0.85,-1.2,0.9));+#2279 = CIRCLE('',#2280,0.25);+#2280 = AXIS2_PLACEMENT_3D('',#2281,#2282,#2283);+#2281 = CARTESIAN_POINT('',(0.85,-1.2,0.65));+#2282 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2283 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2284 = ORIENTED_EDGE('',*,*,#2285,.T.);+#2285 = EDGE_CURVE('',#2277,#848,#2286,.T.);+#2286 = LINE('',#2287,#2288);+#2287 = CARTESIAN_POINT('',(0.85,-1.2,0.9));+#2288 = VECTOR('',#2289,1.);+#2289 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2290 = PLANE('',#2291);+#2291 = AXIS2_PLACEMENT_3D('',#2292,#2293,#2294);+#2292 = CARTESIAN_POINT('',(1.069123385139,-1.2,0.441695635315));+#2293 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2294 = DIRECTION('',(0.,0.,1.));+#2295 = ADVANCED_FACE('',(#2296),#2307,.T.);+#2296 = FACE_BOUND('',#2297,.T.);+#2297 = EDGE_LOOP('',(#2298,#2299,#2300,#2301));+#2298 = ORIENTED_EDGE('',*,*,#1776,.T.);+#2299 = ORIENTED_EDGE('',*,*,#948,.T.);+#2300 = ORIENTED_EDGE('',*,*,#1878,.F.);+#2301 = ORIENTED_EDGE('',*,*,#2302,.F.);+#2302 = EDGE_CURVE('',#1769,#1871,#2303,.T.);+#2303 = LINE('',#2304,#2305);+#2304 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417));+#2305 = VECTOR('',#2306,1.);+#2306 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2307 = CYLINDRICAL_SURFACE('',#2308,0.25);+#2308 = AXIS2_PLACEMENT_3D('',#2309,#2310,#2311);+#2309 = CARTESIAN_POINT('',(-0.85,0.7,0.65));+#2310 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2311 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2312 = ADVANCED_FACE('',(#2313),#2326,.F.);+#2313 = FACE_BOUND('',#2314,.F.);+#2314 = EDGE_LOOP('',(#2315,#2316,#2322,#2323,#2324,#2325));+#2315 = ORIENTED_EDGE('',*,*,#1344,.F.);+#2316 = ORIENTED_EDGE('',*,*,#2317,.T.);+#2317 = EDGE_CURVE('',#1336,#1445,#2318,.T.);+#2318 = LINE('',#2319,#2320);+#2319 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));+#2320 = VECTOR('',#2321,1.);+#2321 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2322 = ORIENTED_EDGE('',*,*,#1453,.T.);+#2323 = ORIENTED_EDGE('',*,*,#1475,.T.);+#2324 = ORIENTED_EDGE('',*,*,#995,.F.);+#2325 = ORIENTED_EDGE('',*,*,#1228,.F.);+#2326 = PLANE('',#2327);+#2327 = AXIS2_PLACEMENT_3D('',#2328,#2329,#2330);+#2328 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));+#2329 = DIRECTION('',(0.,0.,-1.));+#2330 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2331 = ADVANCED_FACE('',(#2332),#2345,.F.);+#2332 = FACE_BOUND('',#2333,.F.);+#2333 = EDGE_LOOP('',(#2334,#2335,#2341,#2342,#2343,#2344));+#2334 = ORIENTED_EDGE('',*,*,#1567,.F.);+#2335 = ORIENTED_EDGE('',*,*,#2336,.T.);+#2336 = EDGE_CURVE('',#1559,#1668,#2337,.T.);+#2337 = LINE('',#2338,#2339);+#2338 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#2339 = VECTOR('',#2340,1.);+#2340 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2341 = ORIENTED_EDGE('',*,*,#1676,.T.);+#2342 = ORIENTED_EDGE('',*,*,#1693,.T.);+#2343 = ORIENTED_EDGE('',*,*,#1011,.F.);+#2344 = ORIENTED_EDGE('',*,*,#1468,.F.);+#2345 = PLANE('',#2346);+#2346 = AXIS2_PLACEMENT_3D('',#2347,#2348,#2349);+#2347 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#2348 = DIRECTION('',(0.,0.,-1.));+#2349 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2350 = ADVANCED_FACE('',(#2351,#2380),#2391,.T.);+#2351 = FACE_BOUND('',#2352,.T.);+#2352 = EDGE_LOOP('',(#2353,#2354,#2355,#2356,#2364,#2372,#2378,#2379));+#2353 = ORIENTED_EDGE('',*,*,#1086,.F.);+#2354 = ORIENTED_EDGE('',*,*,#1063,.F.);+#2355 = ORIENTED_EDGE('',*,*,#1034,.F.);+#2356 = ORIENTED_EDGE('',*,*,#2357,.F.);+#2357 = EDGE_CURVE('',#2358,#1035,#2360,.T.);+#2358 = VERTEX_POINT('',#2359);+#2359 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2360 = LINE('',#2361,#2362);+#2361 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2362 = VECTOR('',#2363,1.);+#2363 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2364 = ORIENTED_EDGE('',*,*,#2365,.F.);+#2365 = EDGE_CURVE('',#2366,#2358,#2368,.T.);+#2366 = VERTEX_POINT('',#2367);+#2367 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2368 = LINE('',#2369,#2370);+#2369 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2370 = VECTOR('',#2371,1.);+#2371 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2372 = ORIENTED_EDGE('',*,*,#2373,.F.);+#2373 = EDGE_CURVE('',#1158,#2366,#2374,.T.);+#2374 = LINE('',#2375,#2376);+#2375 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#2376 = VECTOR('',#2377,1.);+#2377 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2378 = ORIENTED_EDGE('',*,*,#1164,.F.);+#2379 = ORIENTED_EDGE('',*,*,#1109,.F.);+#2380 = FACE_BOUND('',#2381,.T.);+#2381 = EDGE_LOOP('',(#2382));+#2382 = ORIENTED_EDGE('',*,*,#2383,.T.);+#2383 = EDGE_CURVE('',#2384,#2384,#2386,.T.);+#2384 = VERTEX_POINT('',#2385);+#2385 = CARTESIAN_POINT('',(-0.483648457443,1.083648457443,1.55));+#2386 = CIRCLE('',#2387,5.E-02);+#2387 = AXIS2_PLACEMENT_3D('',#2388,#2389,#2390);+#2388 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55));+#2389 = DIRECTION('',(0.,-0.,-1.));+#2390 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2391 = PLANE('',#2392);+#2392 = AXIS2_PLACEMENT_3D('',#2393,#2394,#2395);+#2393 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#2394 = DIRECTION('',(0.,0.,1.));+#2395 = DIRECTION('',(0.436386464522,-0.899759330922,0.));+#2396 = ADVANCED_FACE('',(#2397),#2407,.F.);+#2397 = FACE_BOUND('',#2398,.F.);+#2398 = EDGE_LOOP('',(#2399,#2400,#2401,#2402));+#2399 = ORIENTED_EDGE('',*,*,#1235,.T.);+#2400 = ORIENTED_EDGE('',*,*,#1042,.T.);+#2401 = ORIENTED_EDGE('',*,*,#2357,.F.);+#2402 = ORIENTED_EDGE('',*,*,#2403,.F.);+#2403 = EDGE_CURVE('',#1236,#2358,#2404,.T.);+#2404 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2405,#2406),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2405 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#2406 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2407 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2408,#2409)+ ,(#2410,#2411+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2408 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#2409 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2410 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#2411 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#2412 = ADVANCED_FACE('',(#2413),#2426,.F.);+#2413 = FACE_BOUND('',#2414,.F.);+#2414 = EDGE_LOOP('',(#2415,#2416,#2422,#2423,#2424,#2425));+#2415 = ORIENTED_EDGE('',*,*,#2176,.F.);+#2416 = ORIENTED_EDGE('',*,*,#2417,.T.);+#2417 = EDGE_CURVE('',#2168,#2277,#2418,.T.);+#2418 = LINE('',#2419,#2420);+#2419 = CARTESIAN_POINT('',(0.85,-0.7,0.9));+#2420 = VECTOR('',#2421,1.);+#2421 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2422 = ORIENTED_EDGE('',*,*,#2285,.T.);+#2423 = ORIENTED_EDGE('',*,*,#1217,.T.);+#2424 = ORIENTED_EDGE('',*,*,#1141,.F.);+#2425 = ORIENTED_EDGE('',*,*,#2083,.F.);+#2426 = PLANE('',#2427);+#2427 = AXIS2_PLACEMENT_3D('',#2428,#2429,#2430);+#2428 = CARTESIAN_POINT('',(0.85,-0.7,0.9));+#2429 = DIRECTION('',(0.,0.,-1.));+#2430 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#2431 = ADVANCED_FACE('',(#2432),#2442,.F.);+#2432 = FACE_BOUND('',#2433,.F.);+#2433 = EDGE_LOOP('',(#2434,#2435,#2440,#2441));+#2434 = ORIENTED_EDGE('',*,*,#1251,.T.);+#2435 = ORIENTED_EDGE('',*,*,#2436,.T.);+#2436 = EDGE_CURVE('',#1244,#2366,#2437,.T.);+#2437 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2438,#2439),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2438 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#2439 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2440 = ORIENTED_EDGE('',*,*,#2373,.F.);+#2441 = ORIENTED_EDGE('',*,*,#1157,.F.);+#2442 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2443,#2444)+ ,(#2445,#2446+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2443 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#2444 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#2445 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#2446 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2447 = ADVANCED_FACE('',(#2448),#2459,.T.);+#2448 = FACE_BOUND('',#2449,.T.);+#2449 = EDGE_LOOP('',(#2450,#2451,#2452,#2453));+#2450 = ORIENTED_EDGE('',*,*,#1963,.T.);+#2451 = ORIENTED_EDGE('',*,*,#1187,.T.);+#2452 = ORIENTED_EDGE('',*,*,#2065,.F.);+#2453 = ORIENTED_EDGE('',*,*,#2454,.F.);+#2454 = EDGE_CURVE('',#1956,#2058,#2455,.T.);+#2455 = LINE('',#2456,#2457);+#2456 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417));+#2457 = VECTOR('',#2458,1.);+#2458 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2459 = CYLINDRICAL_SURFACE('',#2460,0.25);+#2460 = AXIS2_PLACEMENT_3D('',#2461,#2462,#2463);+#2461 = CARTESIAN_POINT('',(0.85,1.2,0.65));+#2462 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2463 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2464 = ADVANCED_FACE('',(#2465),#2471,.F.);+#2465 = FACE_BOUND('',#2466,.F.);+#2466 = EDGE_LOOP('',(#2467,#2468,#2469,#2470));+#2467 = ORIENTED_EDGE('',*,*,#1243,.T.);+#2468 = ORIENTED_EDGE('',*,*,#2403,.T.);+#2469 = ORIENTED_EDGE('',*,*,#2365,.F.);+#2470 = ORIENTED_EDGE('',*,*,#2436,.F.);+#2471 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2472,#2473)+ ,(#2474,#2475+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2472 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#2473 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2474 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#2475 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2476 = ADVANCED_FACE('',(#2477),#2488,.T.);+#2477 = FACE_BOUND('',#2478,.T.);+#2478 = EDGE_LOOP('',(#2479,#2480,#2481,#2482));+#2479 = ORIENTED_EDGE('',*,*,#1335,.T.);+#2480 = ORIENTED_EDGE('',*,*,#2317,.T.);+#2481 = ORIENTED_EDGE('',*,*,#1444,.F.);+#2482 = ORIENTED_EDGE('',*,*,#2483,.F.);+#2483 = EDGE_CURVE('',#1328,#1437,#2484,.T.);+#2484 = LINE('',#2485,#2486);+#2485 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417));+#2486 = VECTOR('',#2487,1.);+#2487 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2488 = CYLINDRICAL_SURFACE('',#2489,0.25);+#2489 = AXIS2_PLACEMENT_3D('',#2490,#2491,#2492);+#2490 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));+#2491 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2492 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2493 = ADVANCED_FACE('',(#2494),#2505,.F.);+#2494 = FACE_BOUND('',#2495,.F.);+#2495 = EDGE_LOOP('',(#2496,#2502,#2503,#2504));+#2496 = ORIENTED_EDGE('',*,*,#2497,.T.);+#2497 = EDGE_CURVE('',#1319,#1428,#2498,.T.);+#2498 = LINE('',#2499,#2500);+#2499 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233));+#2500 = VECTOR('',#2501,1.);+#2501 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2502 = ORIENTED_EDGE('',*,*,#1436,.T.);+#2503 = ORIENTED_EDGE('',*,*,#2483,.F.);+#2504 = ORIENTED_EDGE('',*,*,#1327,.F.);+#2505 = PLANE('',#2506);+#2506 = AXIS2_PLACEMENT_3D('',#2507,#2508,#2509);+#2507 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233));+#2508 = DIRECTION('',(0.986721169868,-1.129043606572E-17,-0.162423314012+ ));+#2509 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#2510 = ADVANCED_FACE('',(#2511),#2522,.F.);+#2511 = FACE_BOUND('',#2512,.F.);+#2512 = EDGE_LOOP('',(#2513,#2519,#2520,#2521));+#2513 = ORIENTED_EDGE('',*,*,#2514,.T.);+#2514 = EDGE_CURVE('',#1311,#1420,#2515,.T.);+#2515 = LINE('',#2516,#2517);+#2516 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15));+#2517 = VECTOR('',#2518,1.);+#2518 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2519 = ORIENTED_EDGE('',*,*,#1427,.T.);+#2520 = ORIENTED_EDGE('',*,*,#2497,.F.);+#2521 = ORIENTED_EDGE('',*,*,#1318,.F.);+#2522 = CYLINDRICAL_SURFACE('',#2523,0.1);+#2523 = AXIS2_PLACEMENT_3D('',#2524,#2525,#2526);+#2524 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25));+#2525 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2526 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#2527 = ADVANCED_FACE('',(#2528),#2539,.F.);+#2528 = FACE_BOUND('',#2529,.F.);+#2529 = EDGE_LOOP('',(#2530,#2536,#2537,#2538));+#2530 = ORIENTED_EDGE('',*,*,#2531,.T.);+#2531 = EDGE_CURVE('',#1303,#1412,#2532,.T.);+#2532 = LINE('',#2533,#2534);+#2533 = CARTESIAN_POINT('',(-1.4,-1.2,0.15));+#2534 = VECTOR('',#2535,1.);+#2535 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2536 = ORIENTED_EDGE('',*,*,#1419,.T.);+#2537 = ORIENTED_EDGE('',*,*,#2514,.F.);+#2538 = ORIENTED_EDGE('',*,*,#1310,.F.);+#2539 = PLANE('',#2540);+#2540 = AXIS2_PLACEMENT_3D('',#2541,#2542,#2543);+#2541 = CARTESIAN_POINT('',(-1.4,-1.2,0.15));+#2542 = DIRECTION('',(0.,0.,-1.));+#2543 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2544 = ADVANCED_FACE('',(#2545),#2556,.F.);+#2545 = FACE_BOUND('',#2546,.F.);+#2546 = EDGE_LOOP('',(#2547,#2553,#2554,#2555));+#2547 = ORIENTED_EDGE('',*,*,#2548,.T.);+#2548 = EDGE_CURVE('',#1295,#1404,#2549,.T.);+#2549 = LINE('',#2550,#2551);+#2550 = CARTESIAN_POINT('',(-1.4,-1.2,0.));+#2551 = VECTOR('',#2552,1.);+#2552 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2553 = ORIENTED_EDGE('',*,*,#1411,.T.);+#2554 = ORIENTED_EDGE('',*,*,#2531,.F.);+#2555 = ORIENTED_EDGE('',*,*,#1302,.F.);+#2556 = PLANE('',#2557);+#2557 = AXIS2_PLACEMENT_3D('',#2558,#2559,#2560);+#2558 = CARTESIAN_POINT('',(-1.4,-1.2,0.));+#2559 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2560 = DIRECTION('',(0.,0.,1.));+#2561 = ADVANCED_FACE('',(#2562),#2573,.F.);+#2562 = FACE_BOUND('',#2563,.F.);+#2563 = EDGE_LOOP('',(#2564,#2570,#2571,#2572));+#2564 = ORIENTED_EDGE('',*,*,#2565,.T.);+#2565 = EDGE_CURVE('',#1286,#1395,#2566,.T.);+#2566 = LINE('',#2567,#2568);+#2567 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.));+#2568 = VECTOR('',#2569,1.);+#2569 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2570 = ORIENTED_EDGE('',*,*,#1403,.T.);+#2571 = ORIENTED_EDGE('',*,*,#2548,.F.);+#2572 = ORIENTED_EDGE('',*,*,#1294,.F.);+#2573 = PLANE('',#2574);+#2574 = AXIS2_PLACEMENT_3D('',#2575,#2576,#2577);+#2575 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.));+#2576 = DIRECTION('',(0.,0.,1.));+#2577 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#2578 = ADVANCED_FACE('',(#2579),#2590,.T.);+#2579 = FACE_BOUND('',#2580,.T.);+#2580 = EDGE_LOOP('',(#2581,#2582,#2583,#2584));+#2581 = ORIENTED_EDGE('',*,*,#1285,.T.);+#2582 = ORIENTED_EDGE('',*,*,#2565,.T.);+#2583 = ORIENTED_EDGE('',*,*,#1394,.F.);+#2584 = ORIENTED_EDGE('',*,*,#2585,.F.);+#2585 = EDGE_CURVE('',#1278,#1387,#2586,.T.);+#2586 = LINE('',#2587,#2588);+#2587 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583));+#2588 = VECTOR('',#2589,1.);+#2589 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2590 = CYLINDRICAL_SURFACE('',#2591,0.25);+#2591 = AXIS2_PLACEMENT_3D('',#2592,#2593,#2594);+#2592 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25));+#2593 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2594 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#2595 = ADVANCED_FACE('',(#2596),#2602,.F.);+#2596 = FACE_BOUND('',#2597,.F.);+#2597 = EDGE_LOOP('',(#2598,#2599,#2600,#2601));+#2598 = ORIENTED_EDGE('',*,*,#1368,.T.);+#2599 = ORIENTED_EDGE('',*,*,#1386,.T.);+#2600 = ORIENTED_EDGE('',*,*,#2585,.F.);+#2601 = ORIENTED_EDGE('',*,*,#1277,.F.);+#2602 = PLANE('',#2603);+#2603 = AXIS2_PLACEMENT_3D('',#2604,#2605,#2606);+#2604 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767));+#2605 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012)+ );+#2606 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#2607 = ADVANCED_FACE('',(#2608),#2619,.T.);+#2608 = FACE_BOUND('',#2609,.T.);+#2609 = EDGE_LOOP('',(#2610,#2611,#2612,#2613));+#2610 = ORIENTED_EDGE('',*,*,#1558,.T.);+#2611 = ORIENTED_EDGE('',*,*,#2336,.T.);+#2612 = ORIENTED_EDGE('',*,*,#1667,.F.);+#2613 = ORIENTED_EDGE('',*,*,#2614,.F.);+#2614 = EDGE_CURVE('',#1551,#1660,#2615,.T.);+#2615 = LINE('',#2616,#2617);+#2616 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417));+#2617 = VECTOR('',#2618,1.);+#2618 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2619 = CYLINDRICAL_SURFACE('',#2620,0.25);+#2620 = AXIS2_PLACEMENT_3D('',#2621,#2622,#2623);+#2621 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));+#2622 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2623 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2624 = ADVANCED_FACE('',(#2625),#2636,.F.);+#2625 = FACE_BOUND('',#2626,.F.);+#2626 = EDGE_LOOP('',(#2627,#2633,#2634,#2635));+#2627 = ORIENTED_EDGE('',*,*,#2628,.T.);+#2628 = EDGE_CURVE('',#1542,#1651,#2629,.T.);+#2629 = LINE('',#2630,#2631);+#2630 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233));+#2631 = VECTOR('',#2632,1.);+#2632 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2633 = ORIENTED_EDGE('',*,*,#1659,.T.);+#2634 = ORIENTED_EDGE('',*,*,#2614,.F.);+#2635 = ORIENTED_EDGE('',*,*,#1550,.F.);+#2636 = PLANE('',#2637);+#2637 = AXIS2_PLACEMENT_3D('',#2638,#2639,#2640);+#2638 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233));+#2639 = DIRECTION('',(0.986721169868,-1.129043606572E-17,-0.162423314012+ ));+#2640 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#2641 = ADVANCED_FACE('',(#2642),#2653,.F.);+#2642 = FACE_BOUND('',#2643,.F.);+#2643 = EDGE_LOOP('',(#2644,#2650,#2651,#2652));+#2644 = ORIENTED_EDGE('',*,*,#2645,.T.);+#2645 = EDGE_CURVE('',#1534,#1643,#2646,.T.);+#2646 = LINE('',#2647,#2648);+#2647 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15));+#2648 = VECTOR('',#2649,1.);+#2649 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2650 = ORIENTED_EDGE('',*,*,#1650,.T.);+#2651 = ORIENTED_EDGE('',*,*,#2628,.F.);+#2652 = ORIENTED_EDGE('',*,*,#1541,.F.);+#2653 = CYLINDRICAL_SURFACE('',#2654,0.1);+#2654 = AXIS2_PLACEMENT_3D('',#2655,#2656,#2657);+#2655 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25));+#2656 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2657 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#2658 = ADVANCED_FACE('',(#2659),#2670,.F.);+#2659 = FACE_BOUND('',#2660,.F.);+#2660 = EDGE_LOOP('',(#2661,#2667,#2668,#2669));+#2661 = ORIENTED_EDGE('',*,*,#2662,.T.);+#2662 = EDGE_CURVE('',#1526,#1635,#2663,.T.);+#2663 = LINE('',#2664,#2665);+#2664 = CARTESIAN_POINT('',(-1.4,-0.25,0.15));+#2665 = VECTOR('',#2666,1.);+#2666 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2667 = ORIENTED_EDGE('',*,*,#1642,.T.);+#2668 = ORIENTED_EDGE('',*,*,#2645,.F.);+#2669 = ORIENTED_EDGE('',*,*,#1533,.F.);+#2670 = PLANE('',#2671);+#2671 = AXIS2_PLACEMENT_3D('',#2672,#2673,#2674);+#2672 = CARTESIAN_POINT('',(-1.4,-0.25,0.15));+#2673 = DIRECTION('',(0.,0.,-1.));+#2674 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2675 = ADVANCED_FACE('',(#2676),#2687,.F.);+#2676 = FACE_BOUND('',#2677,.F.);+#2677 = EDGE_LOOP('',(#2678,#2684,#2685,#2686));+#2678 = ORIENTED_EDGE('',*,*,#2679,.T.);+#2679 = EDGE_CURVE('',#1518,#1627,#2680,.T.);+#2680 = LINE('',#2681,#2682);+#2681 = CARTESIAN_POINT('',(-1.4,-0.25,0.));+#2682 = VECTOR('',#2683,1.);+#2683 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2684 = ORIENTED_EDGE('',*,*,#1634,.T.);+#2685 = ORIENTED_EDGE('',*,*,#2662,.F.);+#2686 = ORIENTED_EDGE('',*,*,#1525,.F.);+#2687 = PLANE('',#2688);+#2688 = AXIS2_PLACEMENT_3D('',#2689,#2690,#2691);+#2689 = CARTESIAN_POINT('',(-1.4,-0.25,0.));+#2690 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2691 = DIRECTION('',(0.,0.,1.));+#2692 = ADVANCED_FACE('',(#2693),#2704,.F.);+#2693 = FACE_BOUND('',#2694,.F.);+#2694 = EDGE_LOOP('',(#2695,#2701,#2702,#2703));+#2695 = ORIENTED_EDGE('',*,*,#2696,.T.);+#2696 = EDGE_CURVE('',#1509,#1618,#2697,.T.);+#2697 = LINE('',#2698,#2699);+#2698 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.));+#2699 = VECTOR('',#2700,1.);+#2700 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2701 = ORIENTED_EDGE('',*,*,#1626,.T.);+#2702 = ORIENTED_EDGE('',*,*,#2679,.F.);+#2703 = ORIENTED_EDGE('',*,*,#1517,.F.);+#2704 = PLANE('',#2705);+#2705 = AXIS2_PLACEMENT_3D('',#2706,#2707,#2708);+#2706 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.));+#2707 = DIRECTION('',(0.,0.,1.));+#2708 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#2709 = ADVANCED_FACE('',(#2710),#2721,.T.);+#2710 = FACE_BOUND('',#2711,.T.);+#2711 = EDGE_LOOP('',(#2712,#2713,#2714,#2715));+#2712 = ORIENTED_EDGE('',*,*,#1508,.T.);+#2713 = ORIENTED_EDGE('',*,*,#2696,.T.);+#2714 = ORIENTED_EDGE('',*,*,#1617,.F.);+#2715 = ORIENTED_EDGE('',*,*,#2716,.F.);+#2716 = EDGE_CURVE('',#1501,#1610,#2717,.T.);+#2717 = LINE('',#2718,#2719);+#2718 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583));+#2719 = VECTOR('',#2720,1.);+#2720 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2721 = CYLINDRICAL_SURFACE('',#2722,0.25);+#2722 = AXIS2_PLACEMENT_3D('',#2723,#2724,#2725);+#2723 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25));+#2724 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2725 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#2726 = ADVANCED_FACE('',(#2727),#2733,.F.);+#2727 = FACE_BOUND('',#2728,.F.);+#2728 = EDGE_LOOP('',(#2729,#2730,#2731,#2732));+#2729 = ORIENTED_EDGE('',*,*,#1591,.T.);+#2730 = ORIENTED_EDGE('',*,*,#1609,.T.);+#2731 = ORIENTED_EDGE('',*,*,#2716,.F.);+#2732 = ORIENTED_EDGE('',*,*,#1500,.F.);+#2733 = PLANE('',#2734);+#2734 = AXIS2_PLACEMENT_3D('',#2735,#2736,#2737);+#2735 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767));+#2736 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012)+ );+#2737 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#2738 = ADVANCED_FACE('',(#2739),#2750,.F.);+#2739 = FACE_BOUND('',#2740,.F.);+#2740 = EDGE_LOOP('',(#2741,#2747,#2748,#2749));+#2741 = ORIENTED_EDGE('',*,*,#2742,.T.);+#2742 = EDGE_CURVE('',#1760,#1862,#2743,.T.);+#2743 = LINE('',#2744,#2745);+#2744 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233));+#2745 = VECTOR('',#2746,1.);+#2746 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2747 = ORIENTED_EDGE('',*,*,#1870,.T.);+#2748 = ORIENTED_EDGE('',*,*,#2302,.F.);+#2749 = ORIENTED_EDGE('',*,*,#1768,.F.);+#2750 = PLANE('',#2751);+#2751 = AXIS2_PLACEMENT_3D('',#2752,#2753,#2754);+#2752 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233));+#2753 = DIRECTION('',(0.986721169868,-1.129043606572E-17,-0.162423314012+ ));+#2754 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)+ );+#2755 = ADVANCED_FACE('',(#2756),#2767,.F.);+#2756 = FACE_BOUND('',#2757,.F.);+#2757 = EDGE_LOOP('',(#2758,#2764,#2765,#2766));+#2758 = ORIENTED_EDGE('',*,*,#2759,.T.);+#2759 = EDGE_CURVE('',#1752,#1854,#2760,.T.);+#2760 = LINE('',#2761,#2762);+#2761 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15));+#2762 = VECTOR('',#2763,1.);+#2763 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2764 = ORIENTED_EDGE('',*,*,#1861,.T.);+#2765 = ORIENTED_EDGE('',*,*,#2742,.F.);+#2766 = ORIENTED_EDGE('',*,*,#1759,.F.);+#2767 = CYLINDRICAL_SURFACE('',#2768,0.1);+#2768 = AXIS2_PLACEMENT_3D('',#2769,#2770,#2771);+#2769 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25));+#2770 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2771 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#2772 = ADVANCED_FACE('',(#2773),#2784,.F.);+#2773 = FACE_BOUND('',#2774,.F.);+#2774 = EDGE_LOOP('',(#2775,#2781,#2782,#2783));+#2775 = ORIENTED_EDGE('',*,*,#2776,.T.);+#2776 = EDGE_CURVE('',#1744,#1846,#2777,.T.);+#2777 = LINE('',#2778,#2779);+#2778 = CARTESIAN_POINT('',(-1.4,0.7,0.15));+#2779 = VECTOR('',#2780,1.);+#2780 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2781 = ORIENTED_EDGE('',*,*,#1853,.T.);+#2782 = ORIENTED_EDGE('',*,*,#2759,.F.);+#2783 = ORIENTED_EDGE('',*,*,#1751,.F.);+#2784 = PLANE('',#2785);+#2785 = AXIS2_PLACEMENT_3D('',#2786,#2787,#2788);+#2786 = CARTESIAN_POINT('',(-1.4,0.7,0.15));+#2787 = DIRECTION('',(0.,0.,-1.));+#2788 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2789 = ADVANCED_FACE('',(#2790),#2801,.F.);+#2790 = FACE_BOUND('',#2791,.F.);+#2791 = EDGE_LOOP('',(#2792,#2798,#2799,#2800));+#2792 = ORIENTED_EDGE('',*,*,#2793,.T.);+#2793 = EDGE_CURVE('',#1736,#1838,#2794,.T.);+#2794 = LINE('',#2795,#2796);+#2795 = CARTESIAN_POINT('',(-1.4,0.7,0.));+#2796 = VECTOR('',#2797,1.);+#2797 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2798 = ORIENTED_EDGE('',*,*,#1845,.T.);+#2799 = ORIENTED_EDGE('',*,*,#2776,.F.);+#2800 = ORIENTED_EDGE('',*,*,#1743,.F.);+#2801 = PLANE('',#2802);+#2802 = AXIS2_PLACEMENT_3D('',#2803,#2804,#2805);+#2803 = CARTESIAN_POINT('',(-1.4,0.7,0.));+#2804 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2805 = DIRECTION('',(0.,0.,1.));+#2806 = ADVANCED_FACE('',(#2807),#2818,.F.);+#2807 = FACE_BOUND('',#2808,.F.);+#2808 = EDGE_LOOP('',(#2809,#2815,#2816,#2817));+#2809 = ORIENTED_EDGE('',*,*,#2810,.T.);+#2810 = EDGE_CURVE('',#1727,#1829,#2811,.T.);+#2811 = LINE('',#2812,#2813);+#2812 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.));+#2813 = VECTOR('',#2814,1.);+#2814 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2815 = ORIENTED_EDGE('',*,*,#1837,.T.);+#2816 = ORIENTED_EDGE('',*,*,#2793,.F.);+#2817 = ORIENTED_EDGE('',*,*,#1735,.F.);+#2818 = PLANE('',#2819);+#2819 = AXIS2_PLACEMENT_3D('',#2820,#2821,#2822);+#2820 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.));+#2821 = DIRECTION('',(0.,0.,1.));+#2822 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#2823 = ADVANCED_FACE('',(#2824),#2835,.T.);+#2824 = FACE_BOUND('',#2825,.T.);+#2825 = EDGE_LOOP('',(#2826,#2827,#2828,#2829));+#2826 = ORIENTED_EDGE('',*,*,#1726,.T.);+#2827 = ORIENTED_EDGE('',*,*,#2810,.T.);+#2828 = ORIENTED_EDGE('',*,*,#1828,.F.);+#2829 = ORIENTED_EDGE('',*,*,#2830,.F.);+#2830 = EDGE_CURVE('',#1719,#1821,#2831,.T.);+#2831 = LINE('',#2832,#2833);+#2832 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583));+#2833 = VECTOR('',#2834,1.);+#2834 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2835 = CYLINDRICAL_SURFACE('',#2836,0.25);+#2836 = AXIS2_PLACEMENT_3D('',#2837,#2838,#2839);+#2837 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25));+#2838 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2839 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#2840 = ADVANCED_FACE('',(#2841),#2847,.F.);+#2841 = FACE_BOUND('',#2842,.F.);+#2842 = EDGE_LOOP('',(#2843,#2844,#2845,#2846));+#2843 = ORIENTED_EDGE('',*,*,#1802,.T.);+#2844 = ORIENTED_EDGE('',*,*,#1820,.T.);+#2845 = ORIENTED_EDGE('',*,*,#2830,.F.);+#2846 = ORIENTED_EDGE('',*,*,#1718,.F.);+#2847 = PLANE('',#2848);+#2848 = AXIS2_PLACEMENT_3D('',#2849,#2850,#2851);+#2849 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767));+#2850 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012)+ );+#2851 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868+ ));+#2852 = ADVANCED_FACE('',(#2853),#2864,.F.);+#2853 = FACE_BOUND('',#2854,.F.);+#2854 = EDGE_LOOP('',(#2855,#2861,#2862,#2863));+#2855 = ORIENTED_EDGE('',*,*,#2856,.T.);+#2856 = EDGE_CURVE('',#1947,#2049,#2857,.T.);+#2857 = LINE('',#2858,#2859);+#2858 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233));+#2859 = VECTOR('',#2860,1.);+#2860 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2861 = ORIENTED_EDGE('',*,*,#2057,.T.);+#2862 = ORIENTED_EDGE('',*,*,#2454,.F.);+#2863 = ORIENTED_EDGE('',*,*,#1955,.F.);+#2864 = PLANE('',#2865);+#2865 = AXIS2_PLACEMENT_3D('',#2866,#2867,#2868);+#2866 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233));+#2867 = DIRECTION('',(-0.986721169868,-1.095480561672E-16,+ -0.162423314012));+#2868 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868+ ));+#2869 = ADVANCED_FACE('',(#2870),#2881,.F.);+#2870 = FACE_BOUND('',#2871,.F.);+#2871 = EDGE_LOOP('',(#2872,#2878,#2879,#2880));+#2872 = ORIENTED_EDGE('',*,*,#2873,.T.);+#2873 = EDGE_CURVE('',#1939,#2041,#2874,.T.);+#2874 = LINE('',#2875,#2876);+#2875 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15));+#2876 = VECTOR('',#2877,1.);+#2877 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2878 = ORIENTED_EDGE('',*,*,#2048,.T.);+#2879 = ORIENTED_EDGE('',*,*,#2856,.F.);+#2880 = ORIENTED_EDGE('',*,*,#1946,.F.);+#2881 = CYLINDRICAL_SURFACE('',#2882,0.1);+#2882 = AXIS2_PLACEMENT_3D('',#2883,#2884,#2885);+#2883 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25));+#2884 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2885 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#2886 = ADVANCED_FACE('',(#2887),#2898,.F.);+#2887 = FACE_BOUND('',#2888,.F.);+#2888 = EDGE_LOOP('',(#2889,#2895,#2896,#2897));+#2889 = ORIENTED_EDGE('',*,*,#2890,.T.);+#2890 = EDGE_CURVE('',#1931,#2033,#2891,.T.);+#2891 = LINE('',#2892,#2893);+#2892 = CARTESIAN_POINT('',(1.4,1.2,0.15));+#2893 = VECTOR('',#2894,1.);+#2894 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2895 = ORIENTED_EDGE('',*,*,#2040,.T.);+#2896 = ORIENTED_EDGE('',*,*,#2873,.F.);+#2897 = ORIENTED_EDGE('',*,*,#1938,.F.);+#2898 = PLANE('',#2899);+#2899 = AXIS2_PLACEMENT_3D('',#2900,#2901,#2902);+#2900 = CARTESIAN_POINT('',(1.4,1.2,0.15));+#2901 = DIRECTION('',(0.,0.,-1.));+#2902 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#2903 = ADVANCED_FACE('',(#2904),#2915,.F.);+#2904 = FACE_BOUND('',#2905,.F.);+#2905 = EDGE_LOOP('',(#2906,#2912,#2913,#2914));+#2906 = ORIENTED_EDGE('',*,*,#2907,.T.);+#2907 = EDGE_CURVE('',#1923,#2025,#2908,.T.);+#2908 = LINE('',#2909,#2910);+#2909 = CARTESIAN_POINT('',(1.4,1.2,0.));+#2910 = VECTOR('',#2911,1.);+#2911 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2912 = ORIENTED_EDGE('',*,*,#2032,.T.);+#2913 = ORIENTED_EDGE('',*,*,#2890,.F.);+#2914 = ORIENTED_EDGE('',*,*,#1930,.F.);+#2915 = PLANE('',#2916);+#2916 = AXIS2_PLACEMENT_3D('',#2917,#2918,#2919);+#2917 = CARTESIAN_POINT('',(1.4,1.2,0.));+#2918 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2919 = DIRECTION('',(0.,0.,1.));+#2920 = ADVANCED_FACE('',(#2921),#2932,.F.);+#2921 = FACE_BOUND('',#2922,.F.);+#2922 = EDGE_LOOP('',(#2923,#2929,#2930,#2931));+#2923 = ORIENTED_EDGE('',*,*,#2924,.T.);+#2924 = EDGE_CURVE('',#1914,#2016,#2925,.T.);+#2925 = LINE('',#2926,#2927);+#2926 = CARTESIAN_POINT('',(1.270530792283,1.2,0.));+#2927 = VECTOR('',#2928,1.);+#2928 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2929 = ORIENTED_EDGE('',*,*,#2024,.T.);+#2930 = ORIENTED_EDGE('',*,*,#2907,.F.);+#2931 = ORIENTED_EDGE('',*,*,#1922,.F.);+#2932 = PLANE('',#2933);+#2933 = AXIS2_PLACEMENT_3D('',#2934,#2935,#2936);+#2934 = CARTESIAN_POINT('',(1.270530792283,1.2,0.));+#2935 = DIRECTION('',(0.,0.,1.));+#2936 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2937 = ADVANCED_FACE('',(#2938),#2949,.T.);+#2938 = FACE_BOUND('',#2939,.T.);+#2939 = EDGE_LOOP('',(#2940,#2941,#2942,#2943));+#2940 = ORIENTED_EDGE('',*,*,#1913,.T.);+#2941 = ORIENTED_EDGE('',*,*,#2924,.T.);+#2942 = ORIENTED_EDGE('',*,*,#2015,.F.);+#2943 = ORIENTED_EDGE('',*,*,#2944,.F.);+#2944 = EDGE_CURVE('',#1906,#2008,#2945,.T.);+#2945 = LINE('',#2946,#2947);+#2946 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583));+#2947 = VECTOR('',#2948,1.);+#2948 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2949 = CYLINDRICAL_SURFACE('',#2950,0.25);+#2950 = AXIS2_PLACEMENT_3D('',#2951,#2952,#2953);+#2951 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25));+#2952 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2953 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#2954 = ADVANCED_FACE('',(#2955),#2961,.F.);+#2955 = FACE_BOUND('',#2956,.F.);+#2956 = EDGE_LOOP('',(#2957,#2958,#2959,#2960));+#2957 = ORIENTED_EDGE('',*,*,#1989,.T.);+#2958 = ORIENTED_EDGE('',*,*,#2007,.T.);+#2959 = ORIENTED_EDGE('',*,*,#2944,.F.);+#2960 = ORIENTED_EDGE('',*,*,#1905,.F.);+#2961 = PLANE('',#2962);+#2962 = AXIS2_PLACEMENT_3D('',#2963,#2964,#2965);+#2963 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767));+#2964 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012)+ );+#2965 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)+ );+#2966 = ADVANCED_FACE('',(#2967),#2978,.T.);+#2967 = FACE_BOUND('',#2968,.T.);+#2968 = EDGE_LOOP('',(#2969,#2970,#2971,#2972));+#2969 = ORIENTED_EDGE('',*,*,#2167,.T.);+#2970 = ORIENTED_EDGE('',*,*,#2417,.T.);+#2971 = ORIENTED_EDGE('',*,*,#2276,.F.);+#2972 = ORIENTED_EDGE('',*,*,#2973,.F.);+#2973 = EDGE_CURVE('',#2160,#2269,#2974,.T.);+#2974 = LINE('',#2975,#2976);+#2975 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417));+#2976 = VECTOR('',#2977,1.);+#2977 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2978 = CYLINDRICAL_SURFACE('',#2979,0.25);+#2979 = AXIS2_PLACEMENT_3D('',#2980,#2981,#2982);+#2980 = CARTESIAN_POINT('',(0.85,-0.7,0.65));+#2981 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2982 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2983 = ADVANCED_FACE('',(#2984),#2995,.F.);+#2984 = FACE_BOUND('',#2985,.F.);+#2985 = EDGE_LOOP('',(#2986,#2992,#2993,#2994));+#2986 = ORIENTED_EDGE('',*,*,#2987,.T.);+#2987 = EDGE_CURVE('',#2151,#2260,#2988,.T.);+#2988 = LINE('',#2989,#2990);+#2989 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233));+#2990 = VECTOR('',#2991,1.);+#2991 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2992 = ORIENTED_EDGE('',*,*,#2268,.T.);+#2993 = ORIENTED_EDGE('',*,*,#2973,.F.);+#2994 = ORIENTED_EDGE('',*,*,#2159,.F.);+#2995 = PLANE('',#2996);+#2996 = AXIS2_PLACEMENT_3D('',#2997,#2998,#2999);+#2997 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233));+#2998 = DIRECTION('',(-0.986721169868,-1.095480561672E-16,+ -0.162423314012));+#2999 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868+ ));+#3000 = ADVANCED_FACE('',(#3001),#3012,.F.);+#3001 = FACE_BOUND('',#3002,.F.);+#3002 = EDGE_LOOP('',(#3003,#3009,#3010,#3011));+#3003 = ORIENTED_EDGE('',*,*,#3004,.T.);+#3004 = EDGE_CURVE('',#2143,#2252,#3005,.T.);+#3005 = LINE('',#3006,#3007);+#3006 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15));+#3007 = VECTOR('',#3008,1.);+#3008 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3009 = ORIENTED_EDGE('',*,*,#2259,.T.);+#3010 = ORIENTED_EDGE('',*,*,#2987,.F.);+#3011 = ORIENTED_EDGE('',*,*,#2150,.F.);+#3012 = CYLINDRICAL_SURFACE('',#3013,0.1);+#3013 = AXIS2_PLACEMENT_3D('',#3014,#3015,#3016);+#3014 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25));+#3015 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3016 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#3017 = ADVANCED_FACE('',(#3018),#3029,.F.);+#3018 = FACE_BOUND('',#3019,.F.);+#3019 = EDGE_LOOP('',(#3020,#3026,#3027,#3028));+#3020 = ORIENTED_EDGE('',*,*,#3021,.T.);+#3021 = EDGE_CURVE('',#2135,#2244,#3022,.T.);+#3022 = LINE('',#3023,#3024);+#3023 = CARTESIAN_POINT('',(1.4,-0.7,0.15));+#3024 = VECTOR('',#3025,1.);+#3025 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3026 = ORIENTED_EDGE('',*,*,#2251,.T.);+#3027 = ORIENTED_EDGE('',*,*,#3004,.F.);+#3028 = ORIENTED_EDGE('',*,*,#2142,.F.);+#3029 = PLANE('',#3030);+#3030 = AXIS2_PLACEMENT_3D('',#3031,#3032,#3033);+#3031 = CARTESIAN_POINT('',(1.4,-0.7,0.15));+#3032 = DIRECTION('',(0.,0.,-1.));+#3033 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#3034 = ADVANCED_FACE('',(#3035),#3046,.F.);+#3035 = FACE_BOUND('',#3036,.F.);+#3036 = EDGE_LOOP('',(#3037,#3043,#3044,#3045));+#3037 = ORIENTED_EDGE('',*,*,#3038,.T.);+#3038 = EDGE_CURVE('',#2127,#2236,#3039,.T.);+#3039 = LINE('',#3040,#3041);+#3040 = CARTESIAN_POINT('',(1.4,-0.7,0.));+#3041 = VECTOR('',#3042,1.);+#3042 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3043 = ORIENTED_EDGE('',*,*,#2243,.T.);+#3044 = ORIENTED_EDGE('',*,*,#3021,.F.);+#3045 = ORIENTED_EDGE('',*,*,#2134,.F.);+#3046 = PLANE('',#3047);+#3047 = AXIS2_PLACEMENT_3D('',#3048,#3049,#3050);+#3048 = CARTESIAN_POINT('',(1.4,-0.7,0.));+#3049 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3050 = DIRECTION('',(0.,0.,1.));+#3051 = ADVANCED_FACE('',(#3052),#3063,.F.);+#3052 = FACE_BOUND('',#3053,.F.);+#3053 = EDGE_LOOP('',(#3054,#3060,#3061,#3062));+#3054 = ORIENTED_EDGE('',*,*,#3055,.T.);+#3055 = EDGE_CURVE('',#2118,#2227,#3056,.T.);+#3056 = LINE('',#3057,#3058);+#3057 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.));+#3058 = VECTOR('',#3059,1.);+#3059 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3060 = ORIENTED_EDGE('',*,*,#2235,.T.);+#3061 = ORIENTED_EDGE('',*,*,#3038,.F.);+#3062 = ORIENTED_EDGE('',*,*,#2126,.F.);+#3063 = PLANE('',#3064);+#3064 = AXIS2_PLACEMENT_3D('',#3065,#3066,#3067);+#3065 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.));+#3066 = DIRECTION('',(0.,0.,1.));+#3067 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3068 = ADVANCED_FACE('',(#3069),#3080,.T.);+#3069 = FACE_BOUND('',#3070,.T.);+#3070 = EDGE_LOOP('',(#3071,#3072,#3073,#3074));+#3071 = ORIENTED_EDGE('',*,*,#2117,.T.);+#3072 = ORIENTED_EDGE('',*,*,#3055,.T.);+#3073 = ORIENTED_EDGE('',*,*,#2226,.F.);+#3074 = ORIENTED_EDGE('',*,*,#3075,.F.);+#3075 = EDGE_CURVE('',#2110,#2219,#3076,.T.);+#3076 = LINE('',#3077,#3078);+#3077 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583));+#3078 = VECTOR('',#3079,1.);+#3079 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3080 = CYLINDRICAL_SURFACE('',#3081,0.25);+#3081 = AXIS2_PLACEMENT_3D('',#3082,#3083,#3084);+#3082 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25));+#3083 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#3084 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#3085 = ADVANCED_FACE('',(#3086),#3092,.F.);+#3086 = FACE_BOUND('',#3087,.F.);+#3087 = EDGE_LOOP('',(#3088,#3089,#3090,#3091));+#3088 = ORIENTED_EDGE('',*,*,#2200,.T.);+#3089 = ORIENTED_EDGE('',*,*,#2218,.T.);+#3090 = ORIENTED_EDGE('',*,*,#3075,.F.);+#3091 = ORIENTED_EDGE('',*,*,#2109,.F.);+#3092 = PLANE('',#3093);+#3093 = AXIS2_PLACEMENT_3D('',#3094,#3095,#3096);+#3094 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767));+#3095 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012)+ );+#3096 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)+ );+#3097 = ADVANCED_FACE('',(#3098),#3101,.F.);+#3098 = FACE_BOUND('',#3099,.T.);+#3099 = EDGE_LOOP('',(#3100));+#3100 = ORIENTED_EDGE('',*,*,#2383,.F.);+#3101 = PLANE('',#3102);+#3102 = AXIS2_PLACEMENT_3D('',#3103,#3104,#3105);+#3103 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55));+#3104 = DIRECTION('',(0.,0.,-1.));+#3105 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3110)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#3107,#3108,#3109)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#3107 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#3108 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#3109 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#3110 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#3107,+ 'distance_accuracy_value','confusion accuracy');+#3111 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3112,#3114);+#3112 = ( REPRESENTATION_RELATIONSHIP('','',#36,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3113) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#3113 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);+#3114 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+ #3115);+#3115 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('10774','=>[0:1:1:1]','',#5,#31,$+ );+#3116 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33));+#3117 = SHAPE_DEFINITION_REPRESENTATION(#3118,#3124);+#3118 = PRODUCT_DEFINITION_SHAPE('','',#3119);+#3119 = PRODUCT_DEFINITION('design','',#3120,#3123);+#3120 = PRODUCT_DEFINITION_FORMATION('','',#3121);+#3121 = PRODUCT('Adom.LaserEtch','Adom.LaserEtch','',(#3122));+#3122 = PRODUCT_CONTEXT('',#2,'mechanical');+#3123 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#3124 = SHAPE_REPRESENTATION('',(#11,#3125,#4115,#4397,#4844,#5344,#5725+ ,#6023,#6605,#6903,#7485,#7833,#8399,#8846,#9161,#10184),#10532);+#3125 = MANIFOLD_SOLID_BREP('',#3126);+#3126 = CLOSED_SHELL('',(#3127,#3167,#3200,#3233,#3266,#3299,#3332,#3365+ ,#3396,#3429,#3462,#3495,#3528,#3561,#3594,#3625,#3658,#3691,#3724,+ #3757,#3790,#3823,#3854,#3887,#3920,#3953,#3986,#4019,#4043,#4079));+#3127 = ADVANCED_FACE('',(#3128),#3162,.T.);+#3128 = FACE_BOUND('',#3129,.T.);+#3129 = EDGE_LOOP('',(#3130,#3140,#3148,#3156));+#3130 = ORIENTED_EDGE('',*,*,#3131,.T.);+#3131 = EDGE_CURVE('',#3132,#3134,#3136,.T.);+#3132 = VERTEX_POINT('',#3133);+#3133 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.552977284328));+#3134 = VERTEX_POINT('',#3135);+#3135 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.558931852983));+#3136 = LINE('',#3137,#3138);+#3137 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.552977284328));+#3138 = VECTOR('',#3139,1.);+#3139 = DIRECTION('',(0.,0.,1.));+#3140 = ORIENTED_EDGE('',*,*,#3141,.T.);+#3141 = EDGE_CURVE('',#3134,#3142,#3144,.T.);+#3142 = VERTEX_POINT('',#3143);+#3143 = CARTESIAN_POINT('',(1.315645662353E-02,-1.091549774119,+ 1.558931852983));+#3144 = LINE('',#3145,#3146);+#3145 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.558931852983));+#3146 = VECTOR('',#3147,1.);+#3147 = DIRECTION('',(-0.354654234121,-0.934997526318,0.));+#3148 = ORIENTED_EDGE('',*,*,#3149,.F.);+#3149 = EDGE_CURVE('',#3150,#3142,#3152,.T.);+#3150 = VERTEX_POINT('',#3151);+#3151 = CARTESIAN_POINT('',(1.315645662353E-02,-1.091549774119,+ 1.552977284328));+#3152 = LINE('',#3153,#3154);+#3153 = CARTESIAN_POINT('',(1.315645662353E-02,-1.091549774119,+ 1.552977284328));+#3154 = VECTOR('',#3155,1.);+#3155 = DIRECTION('',(0.,0.,1.));+#3156 = ORIENTED_EDGE('',*,*,#3157,.F.);+#3157 = EDGE_CURVE('',#3132,#3150,#3158,.T.);+#3158 = LINE('',#3159,#3160);+#3159 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.552977284328));+#3160 = VECTOR('',#3161,1.);+#3161 = DIRECTION('',(-0.354654234121,-0.934997526318,0.));+#3162 = PLANE('',#3163);+#3163 = AXIS2_PLACEMENT_3D('',#3164,#3165,#3166);+#3164 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.552977284328));+#3165 = DIRECTION('',(0.934997526318,-0.354654234121,0.));+#3166 = DIRECTION('',(-0.354654234121,-0.934997526318,0.));+#3167 = ADVANCED_FACE('',(#3168),#3193,.T.);+#3168 = FACE_BOUND('',#3169,.T.);+#3169 = EDGE_LOOP('',(#3170,#3171,#3179,#3187));+#3170 = ORIENTED_EDGE('',*,*,#3149,.T.);+#3171 = ORIENTED_EDGE('',*,*,#3172,.T.);+#3172 = EDGE_CURVE('',#3142,#3173,#3175,.T.);+#3173 = VERTEX_POINT('',#3174);+#3174 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.558931852983));+#3175 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3176,#3177,#3178),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3176 = CARTESIAN_POINT('',(1.315645662353E-02,-1.091549774119,+ 1.558931852983));+#3177 = CARTESIAN_POINT('',(7.995636622034E-04,-1.123968446241,+ 1.558931852983));+#3178 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.558931852983));+#3179 = ORIENTED_EDGE('',*,*,#3180,.F.);+#3180 = EDGE_CURVE('',#3181,#3173,#3183,.T.);+#3181 = VERTEX_POINT('',#3182);+#3182 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.552977284328));+#3183 = LINE('',#3184,#3185);+#3184 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.552977284328));+#3185 = VECTOR('',#3186,1.);+#3186 = DIRECTION('',(0.,0.,1.));+#3187 = ORIENTED_EDGE('',*,*,#3188,.F.);+#3188 = EDGE_CURVE('',#3150,#3181,#3189,.T.);+#3189 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3190,#3191,#3192),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3190 = CARTESIAN_POINT('',(1.315645662353E-02,-1.091549774119,+ 1.552977284328));+#3191 = CARTESIAN_POINT('',(7.995636622034E-04,-1.123968446241,+ 1.552977284328));+#3192 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.552977284328));+#3193 = SURFACE_OF_LINEAR_EXTRUSION('',#3194,#3198);+#3194 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3195,#3196,#3197),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3195 = CARTESIAN_POINT('',(1.315645662353E-02,-1.091549774119,+ 1.552977284328));+#3196 = CARTESIAN_POINT('',(7.995636622034E-04,-1.123968446241,+ 1.552977284328));+#3197 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.552977284328));+#3198 = VECTOR('',#3199,1.);+#3199 = DIRECTION('',(-0.,-0.,-1.));+#3200 = ADVANCED_FACE('',(#3201),#3226,.T.);+#3201 = FACE_BOUND('',#3202,.T.);+#3202 = EDGE_LOOP('',(#3203,#3204,#3212,#3220));+#3203 = ORIENTED_EDGE('',*,*,#3180,.T.);+#3204 = ORIENTED_EDGE('',*,*,#3205,.T.);+#3205 = EDGE_CURVE('',#3173,#3206,#3208,.T.);+#3206 = VERTEX_POINT('',#3207);+#3207 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.558931852983));+#3208 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3209,#3210,#3211),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3209 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.558931852983));+#3210 = CARTESIAN_POINT('',(-2.638560085272E-02,-1.146937729628,+ 1.558931852983));+#3211 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.558931852983));+#3212 = ORIENTED_EDGE('',*,*,#3213,.F.);+#3213 = EDGE_CURVE('',#3214,#3206,#3216,.T.);+#3214 = VERTEX_POINT('',#3215);+#3215 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.552977284328));+#3216 = LINE('',#3217,#3218);+#3217 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.552977284328));+#3218 = VECTOR('',#3219,1.);+#3219 = DIRECTION('',(0.,0.,1.));+#3220 = ORIENTED_EDGE('',*,*,#3221,.F.);+#3221 = EDGE_CURVE('',#3181,#3214,#3222,.T.);+#3222 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3223,#3224,#3225),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3223 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.552977284328));+#3224 = CARTESIAN_POINT('',(-2.638560085272E-02,-1.146937729628,+ 1.552977284328));+#3225 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.552977284328));+#3226 = SURFACE_OF_LINEAR_EXTRUSION('',#3227,#3231);+#3227 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3228,#3229,#3230),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3228 = CARTESIAN_POINT('',(-1.279301859526E-02,-1.135453087935,+ 1.552977284328));+#3229 = CARTESIAN_POINT('',(-2.638560085272E-02,-1.146937729628,+ 1.552977284328));+#3230 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.552977284328));+#3231 = VECTOR('',#3232,1.);+#3232 = DIRECTION('',(-0.,-0.,-1.));+#3233 = ADVANCED_FACE('',(#3234),#3259,.T.);+#3234 = FACE_BOUND('',#3235,.T.);+#3235 = EDGE_LOOP('',(#3236,#3237,#3245,#3253));+#3236 = ORIENTED_EDGE('',*,*,#3213,.T.);+#3237 = ORIENTED_EDGE('',*,*,#3238,.T.);+#3238 = EDGE_CURVE('',#3206,#3239,#3241,.T.);+#3239 = VERTEX_POINT('',#3240);+#3240 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.558931852983));+#3241 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3242,#3243,#3244),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3242 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.558931852983));+#3243 = CARTESIAN_POINT('',(-7.886605213553E-02,-1.146937729628,+ 1.558931852983));+#3244 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.558931852983));+#3245 = ORIENTED_EDGE('',*,*,#3246,.F.);+#3246 = EDGE_CURVE('',#3247,#3239,#3249,.T.);+#3247 = VERTEX_POINT('',#3248);+#3248 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.552977284328));+#3249 = LINE('',#3250,#3251);+#3250 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.552977284328));+#3251 = VECTOR('',#3252,1.);+#3252 = DIRECTION('',(0.,0.,1.));+#3253 = ORIENTED_EDGE('',*,*,#3254,.F.);+#3254 = EDGE_CURVE('',#3214,#3247,#3255,.T.);+#3255 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3256,#3257,#3258),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3256 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.552977284328));+#3257 = CARTESIAN_POINT('',(-7.886605213553E-02,-1.146937729628,+ 1.552977284328));+#3258 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.552977284328));+#3259 = SURFACE_OF_LINEAR_EXTRUSION('',#3260,#3264);+#3260 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3261,#3262,#3263),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3261 = CARTESIAN_POINT('',(-4.935488423965E-02,-1.146937729628,+ 1.552977284328));+#3262 = CARTESIAN_POINT('',(-7.886605213553E-02,-1.146937729628,+ 1.552977284328));+#3263 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.552977284328));+#3264 = VECTOR('',#3265,1.);+#3265 = DIRECTION('',(-0.,-0.,-1.));+#3266 = ADVANCED_FACE('',(#3267),#3292,.T.);+#3267 = FACE_BOUND('',#3268,.T.);+#3268 = EDGE_LOOP('',(#3269,#3270,#3278,#3286));+#3269 = ORIENTED_EDGE('',*,*,#3246,.T.);+#3270 = ORIENTED_EDGE('',*,*,#3271,.T.);+#3271 = EDGE_CURVE('',#3239,#3272,#3274,.T.);+#3272 = VERTEX_POINT('',#3273);+#3273 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.558931852983));+#3274 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3275,#3276,#3277),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3275 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.558931852983));+#3276 = CARTESIAN_POINT('',(-0.112593101159,-1.109140174688,+ 1.558931852983));+#3277 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.558931852983));+#3278 = ORIENTED_EDGE('',*,*,#3279,.F.);+#3279 = EDGE_CURVE('',#3280,#3272,#3282,.T.);+#3280 = VERTEX_POINT('',#3281);+#3281 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.552977284328));+#3282 = LINE('',#3283,#3284);+#3283 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.552977284328));+#3284 = VECTOR('',#3285,1.);+#3285 = DIRECTION('',(0.,0.,1.));+#3286 = ORIENTED_EDGE('',*,*,#3287,.F.);+#3287 = EDGE_CURVE('',#3247,#3280,#3288,.T.);+#3288 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3289,#3290,#3291),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3289 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.552977284328));+#3290 = CARTESIAN_POINT('',(-0.112593101159,-1.109140174688,+ 1.552977284328));+#3291 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.552977284328));+#3292 = SURFACE_OF_LINEAR_EXTRUSION('',#3293,#3297);+#3293 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3294,#3295,#3296),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3294 = CARTESIAN_POINT('',(-9.572957664746E-02,-1.128038952158,+ 1.552977284328));+#3295 = CARTESIAN_POINT('',(-0.112593101159,-1.109140174688,+ 1.552977284328));+#3296 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.552977284328));+#3297 = VECTOR('',#3298,1.);+#3298 = DIRECTION('',(-0.,-0.,-1.));+#3299 = ADVANCED_FACE('',(#3300),#3325,.T.);+#3300 = FACE_BOUND('',#3301,.T.);+#3301 = EDGE_LOOP('',(#3302,#3303,#3311,#3319));+#3302 = ORIENTED_EDGE('',*,*,#3279,.T.);+#3303 = ORIENTED_EDGE('',*,*,#3304,.T.);+#3304 = EDGE_CURVE('',#3272,#3305,#3307,.T.);+#3305 = VERTEX_POINT('',#3306);+#3306 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.558931852983));+#3307 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3308,#3309,#3310),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3308 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.558931852983));+#3309 = CARTESIAN_POINT('',(-0.112593101159,-1.061166354955,+ 1.558931852983));+#3310 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.558931852983));+#3311 = ORIENTED_EDGE('',*,*,#3312,.F.);+#3312 = EDGE_CURVE('',#3313,#3305,#3315,.T.);+#3313 = VERTEX_POINT('',#3314);+#3314 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.552977284328));+#3315 = LINE('',#3316,#3317);+#3316 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.552977284328));+#3317 = VECTOR('',#3318,1.);+#3318 = DIRECTION('',(0.,0.,1.));+#3319 = ORIENTED_EDGE('',*,*,#3320,.F.);+#3320 = EDGE_CURVE('',#3280,#3313,#3321,.T.);+#3321 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3322,#3323,#3324),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3322 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.552977284328));+#3323 = CARTESIAN_POINT('',(-0.112593101159,-1.061166354955,+ 1.552977284328));+#3324 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.552977284328));+#3325 = SURFACE_OF_LINEAR_EXTRUSION('',#3326,#3330);+#3326 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3327,#3328,#3329),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3327 = CARTESIAN_POINT('',(-0.112593101159,-1.07614000172,+ 1.552977284328));+#3328 = CARTESIAN_POINT('',(-0.112593101159,-1.061166354955,+ 1.552977284328));+#3329 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.552977284328));+#3330 = VECTOR('',#3331,1.);+#3331 = DIRECTION('',(-0.,-0.,-1.));+#3332 = ADVANCED_FACE('',(#3333),#3358,.T.);+#3333 = FACE_BOUND('',#3334,.T.);+#3334 = EDGE_LOOP('',(#3335,#3336,#3344,#3352));+#3335 = ORIENTED_EDGE('',*,*,#3312,.T.);+#3336 = ORIENTED_EDGE('',*,*,#3337,.T.);+#3337 = EDGE_CURVE('',#3305,#3338,#3340,.T.);+#3338 = VERTEX_POINT('',#3339);+#3339 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.558931852983));+#3340 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3341,#3342,#3343),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3341 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.558931852983));+#3342 = CARTESIAN_POINT('',(-0.105760466228,-1.031219061426,+ 1.558931852983));+#3343 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.558931852983));+#3344 = ORIENTED_EDGE('',*,*,#3345,.F.);+#3345 = EDGE_CURVE('',#3346,#3338,#3348,.T.);+#3346 = VERTEX_POINT('',#3347);+#3347 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.552977284328));+#3348 = LINE('',#3349,#3350);+#3349 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.552977284328));+#3350 = VECTOR('',#3351,1.);+#3351 = DIRECTION('',(0.,0.,1.));+#3352 = ORIENTED_EDGE('',*,*,#3353,.F.);+#3353 = EDGE_CURVE('',#3313,#3346,#3354,.T.);+#3354 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3355,#3356,#3357),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3355 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.552977284328));+#3356 = CARTESIAN_POINT('',(-0.105760466228,-1.031219061426,+ 1.552977284328));+#3357 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.552977284328));+#3358 = SURFACE_OF_LINEAR_EXTRUSION('',#3359,#3363);+#3359 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3360,#3361,#3362),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3360 = CARTESIAN_POINT('',(-0.109176783694,-1.04619270819,+ 1.552977284328));+#3361 = CARTESIAN_POINT('',(-0.105760466228,-1.031219061426,+ 1.552977284328));+#3362 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.552977284328));+#3363 = VECTOR('',#3364,1.);+#3364 = DIRECTION('',(-0.,-0.,-1.));+#3365 = ADVANCED_FACE('',(#3366),#3391,.T.);+#3366 = FACE_BOUND('',#3367,.T.);+#3367 = EDGE_LOOP('',(#3368,#3369,#3377,#3385));+#3368 = ORIENTED_EDGE('',*,*,#3345,.T.);+#3369 = ORIENTED_EDGE('',*,*,#3370,.T.);+#3370 = EDGE_CURVE('',#3338,#3371,#3373,.T.);+#3371 = VERTEX_POINT('',#3372);+#3372 = CARTESIAN_POINT('',(-5.720514565038E-02,-1.016536165083,+ 1.558931852983));+#3373 = LINE('',#3374,#3375);+#3374 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.558931852983));+#3375 = VECTOR('',#3376,1.);+#3376 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3377 = ORIENTED_EDGE('',*,*,#3378,.F.);+#3378 = EDGE_CURVE('',#3379,#3371,#3381,.T.);+#3379 = VERTEX_POINT('',#3380);+#3380 = CARTESIAN_POINT('',(-5.720514565038E-02,-1.016536165083,+ 1.552977284328));+#3381 = LINE('',#3382,#3383);+#3382 = CARTESIAN_POINT('',(-5.720514565038E-02,-1.016536165083,+ 1.552977284328));+#3383 = VECTOR('',#3384,1.);+#3384 = DIRECTION('',(0.,0.,1.));+#3385 = ORIENTED_EDGE('',*,*,#3386,.F.);+#3386 = EDGE_CURVE('',#3346,#3379,#3387,.T.);+#3387 = LINE('',#3388,#3389);+#3388 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.552977284328));+#3389 = VECTOR('',#3390,1.);+#3390 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3391 = PLANE('',#3392);+#3392 = AXIS2_PLACEMENT_3D('',#3393,#3394,#3395);+#3393 = CARTESIAN_POINT('',(-9.907320650758E-02,-1.016536165083,+ 1.552977284328));+#3394 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#3395 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3396 = ADVANCED_FACE('',(#3397),#3422,.T.);+#3397 = FACE_BOUND('',#3398,.T.);+#3398 = EDGE_LOOP('',(#3399,#3400,#3408,#3416));+#3399 = ORIENTED_EDGE('',*,*,#3378,.T.);+#3400 = ORIENTED_EDGE('',*,*,#3401,.T.);+#3401 = EDGE_CURVE('',#3371,#3402,#3404,.T.);+#3402 = VERTEX_POINT('',#3403);+#3403 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.558931852983));+#3404 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3405,#3406,#3407),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3405 = CARTESIAN_POINT('',(-5.720514565038E-02,-1.016536165083,+ 1.558931852983));+#3406 = CARTESIAN_POINT('',(-6.694528480813E-02,-1.030346810158,+ 1.558931852983));+#3407 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.558931852983));+#3408 = ORIENTED_EDGE('',*,*,#3409,.F.);+#3409 = EDGE_CURVE('',#3410,#3402,#3412,.T.);+#3410 = VERTEX_POINT('',#3411);+#3411 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.552977284328));+#3412 = LINE('',#3413,#3414);+#3413 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.552977284328));+#3414 = VECTOR('',#3415,1.);+#3415 = DIRECTION('',(0.,0.,1.));+#3416 = ORIENTED_EDGE('',*,*,#3417,.F.);+#3417 = EDGE_CURVE('',#3379,#3410,#3418,.T.);+#3418 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3419,#3420,#3421),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3419 = CARTESIAN_POINT('',(-5.720514565038E-02,-1.016536165083,+ 1.552977284328));+#3420 = CARTESIAN_POINT('',(-6.694528480813E-02,-1.030346810158,+ 1.552977284328));+#3421 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.552977284328));+#3422 = SURFACE_OF_LINEAR_EXTRUSION('',#3423,#3427);+#3423 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3424,#3425,#3426),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3424 = CARTESIAN_POINT('',(-5.720514565038E-02,-1.016536165083,+ 1.552977284328));+#3425 = CARTESIAN_POINT('',(-6.694528480813E-02,-1.030346810158,+ 1.552977284328));+#3426 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.552977284328));+#3427 = VECTOR('',#3428,1.);+#3428 = DIRECTION('',(-0.,-0.,-1.));+#3429 = ADVANCED_FACE('',(#3430),#3455,.T.);+#3430 = FACE_BOUND('',#3431,.T.);+#3431 = EDGE_LOOP('',(#3432,#3433,#3441,#3449));+#3432 = ORIENTED_EDGE('',*,*,#3409,.T.);+#3433 = ORIENTED_EDGE('',*,*,#3434,.T.);+#3434 = EDGE_CURVE('',#3402,#3435,#3437,.T.);+#3435 = VERTEX_POINT('',#3436);+#3436 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.558931852983));+#3437 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3438,#3439,#3440),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3438 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.558931852983));+#3439 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.058840351574,+ 1.558931852983));+#3440 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.558931852983));+#3441 = ORIENTED_EDGE('',*,*,#3442,.F.);+#3442 = EDGE_CURVE('',#3443,#3435,#3445,.T.);+#3443 = VERTEX_POINT('',#3444);+#3444 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.552977284328));+#3445 = LINE('',#3446,#3447);+#3446 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.552977284328));+#3447 = VECTOR('',#3448,1.);+#3448 = DIRECTION('',(0.,0.,1.));+#3449 = ORIENTED_EDGE('',*,*,#3450,.F.);+#3450 = EDGE_CURVE('',#3410,#3443,#3451,.T.);+#3451 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3452,#3453,#3454),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3452 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.552977284328));+#3453 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.058840351574,+ 1.552977284328));+#3454 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.552977284328));+#3455 = SURFACE_OF_LINEAR_EXTRUSION('',#3456,#3460);+#3456 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3457,#3458,#3459),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3457 = CARTESIAN_POINT('',(-7.203341720397E-02,-1.044593580866,+ 1.552977284328));+#3458 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.058840351574,+ 1.552977284328));+#3459 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.552977284328));+#3460 = VECTOR('',#3461,1.);+#3461 = DIRECTION('',(-0.,-0.,-1.));+#3462 = ADVANCED_FACE('',(#3463),#3488,.T.);+#3463 = FACE_BOUND('',#3464,.T.);+#3464 = EDGE_LOOP('',(#3465,#3466,#3474,#3482));+#3465 = ORIENTED_EDGE('',*,*,#3442,.T.);+#3466 = ORIENTED_EDGE('',*,*,#3467,.T.);+#3467 = EDGE_CURVE('',#3435,#3468,#3470,.T.);+#3468 = VERTEX_POINT('',#3469);+#3469 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.558931852983));+#3470 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3471,#3472,#3473),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3471 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.558931852983));+#3472 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.08835151947,+ 1.558931852983));+#3473 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.558931852983));+#3474 = ORIENTED_EDGE('',*,*,#3475,.F.);+#3475 = EDGE_CURVE('',#3476,#3468,#3478,.T.);+#3476 = VERTEX_POINT('',#3477);+#3477 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.552977284328));+#3478 = LINE('',#3479,#3480);+#3479 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.552977284328));+#3480 = VECTOR('',#3481,1.);+#3481 = DIRECTION('',(0.,0.,1.));+#3482 = ORIENTED_EDGE('',*,*,#3483,.F.);+#3483 = EDGE_CURVE('',#3443,#3476,#3484,.T.);+#3484 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3485,#3486,#3487),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3485 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.552977284328));+#3486 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.08835151947,+ 1.552977284328));+#3487 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.552977284328));+#3488 = SURFACE_OF_LINEAR_EXTRUSION('',#3489,#3493);+#3489 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3490,#3491,#3492),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3490 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.07279637186,+ 1.552977284328));+#3491 = CARTESIAN_POINT('',(-7.712154959981E-02,-1.08835151947,+ 1.552977284328));+#3492 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.552977284328));+#3493 = VECTOR('',#3494,1.);+#3494 = DIRECTION('',(-0.,-0.,-1.));+#3495 = ADVANCED_FACE('',(#3496),#3521,.T.);+#3496 = FACE_BOUND('',#3497,.T.);+#3497 = EDGE_LOOP('',(#3498,#3499,#3507,#3515));+#3498 = ORIENTED_EDGE('',*,*,#3475,.T.);+#3499 = ORIENTED_EDGE('',*,*,#3500,.T.);+#3500 = EDGE_CURVE('',#3468,#3501,#3503,.T.);+#3501 = VERTEX_POINT('',#3502);+#3502 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.558931852983));+#3503 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3504,#3505,#3506),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3504 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.558931852983));+#3505 = CARTESIAN_POINT('',(-6.461928142718E-02,-1.10492429356,+ 1.558931852983));+#3506 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.558931852983));+#3507 = ORIENTED_EDGE('',*,*,#3508,.F.);+#3508 = EDGE_CURVE('',#3509,#3501,#3511,.T.);+#3509 = VERTEX_POINT('',#3510);+#3510 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.552977284328));+#3511 = LINE('',#3512,#3513);+#3512 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.552977284328));+#3513 = VECTOR('',#3514,1.);+#3514 = DIRECTION('',(0.,0.,1.));+#3515 = ORIENTED_EDGE('',*,*,#3516,.F.);+#3516 = EDGE_CURVE('',#3476,#3509,#3517,.T.);+#3517 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3518,#3519,#3520),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3518 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.552977284328));+#3519 = CARTESIAN_POINT('',(-6.461928142718E-02,-1.10492429356,+ 1.552977284328));+#3520 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.552977284328));+#3521 = SURFACE_OF_LINEAR_EXTRUSION('',#3522,#3526);+#3522 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3523,#3524,#3525),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3523 = CARTESIAN_POINT('',(-7.087041551349E-02,-1.096637906515,+ 1.552977284328));+#3524 = CARTESIAN_POINT('',(-6.461928142718E-02,-1.10492429356,+ 1.552977284328));+#3525 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.552977284328));+#3526 = VECTOR('',#3527,1.);+#3527 = DIRECTION('',(-0.,-0.,-1.));+#3528 = ADVANCED_FACE('',(#3529),#3554,.T.);+#3529 = FACE_BOUND('',#3530,.T.);+#3530 = EDGE_LOOP('',(#3531,#3532,#3540,#3548));+#3531 = ORIENTED_EDGE('',*,*,#3508,.T.);+#3532 = ORIENTED_EDGE('',*,*,#3533,.T.);+#3533 = EDGE_CURVE('',#3501,#3534,#3536,.T.);+#3534 = VERTEX_POINT('',#3535);+#3535 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.558931852983));+#3536 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3537,#3538,#3539),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3537 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.558931852983));+#3538 = CARTESIAN_POINT('',(-4.397600142119E-02,-1.10492429356,+ 1.558931852983));+#3539 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.558931852983));+#3540 = ORIENTED_EDGE('',*,*,#3541,.F.);+#3541 = EDGE_CURVE('',#3542,#3534,#3544,.T.);+#3542 = VERTEX_POINT('',#3543);+#3543 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.552977284328));+#3544 = LINE('',#3545,#3546);+#3545 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.552977284328));+#3546 = VECTOR('',#3547,1.);+#3547 = DIRECTION('',(0.,0.,1.));+#3548 = ORIENTED_EDGE('',*,*,#3549,.F.);+#3549 = EDGE_CURVE('',#3509,#3542,#3550,.T.);+#3550 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3551,#3552,#3553),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3551 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.552977284328));+#3552 = CARTESIAN_POINT('',(-4.397600142119E-02,-1.10492429356,+ 1.552977284328));+#3553 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.552977284328));+#3554 = SURFACE_OF_LINEAR_EXTRUSION('',#3555,#3559);+#3555 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3556,#3557,#3558),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3556 = CARTESIAN_POINT('',(-5.29892645224E-02,-1.10492429356,+ 1.552977284328));+#3557 = CARTESIAN_POINT('',(-4.397600142119E-02,-1.10492429356,+ 1.552977284328));+#3558 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.552977284328));+#3559 = VECTOR('',#3560,1.);+#3560 = DIRECTION('',(-0.,-0.,-1.));+#3561 = ADVANCED_FACE('',(#3562),#3587,.T.);+#3562 = FACE_BOUND('',#3563,.T.);+#3563 = EDGE_LOOP('',(#3564,#3565,#3573,#3581));+#3564 = ORIENTED_EDGE('',*,*,#3541,.T.);+#3565 = ORIENTED_EDGE('',*,*,#3566,.T.);+#3566 = EDGE_CURVE('',#3534,#3567,#3569,.T.);+#3567 = VERTEX_POINT('',#3568);+#3568 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.558931852983));+#3569 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3570,#3571,#3572),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3570 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.558931852983));+#3571 = CARTESIAN_POINT('',(-3.220060930511E-02,-1.092858151021,+ 1.558931852983));+#3572 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.558931852983));+#3573 = ORIENTED_EDGE('',*,*,#3574,.F.);+#3574 = EDGE_CURVE('',#3575,#3567,#3577,.T.);+#3575 = VERTEX_POINT('',#3576);+#3576 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.552977284328));+#3577 = LINE('',#3578,#3579);+#3578 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.552977284328));+#3579 = VECTOR('',#3580,1.);+#3580 = DIRECTION('',(0.,0.,1.));+#3581 = ORIENTED_EDGE('',*,*,#3582,.F.);+#3582 = EDGE_CURVE('',#3542,#3575,#3583,.T.);+#3583 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3584,#3585,#3586),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3584 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.552977284328));+#3585 = CARTESIAN_POINT('',(-3.220060930511E-02,-1.092858151021,+ 1.552977284328));+#3586 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.552977284328));+#3587 = SURFACE_OF_LINEAR_EXTRUSION('',#3588,#3592);+#3588 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3589,#3590,#3591),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3589 = CARTESIAN_POINT('',(-3.808830536315E-02,-1.09889122229,+ 1.552977284328));+#3590 = CARTESIAN_POINT('',(-3.220060930511E-02,-1.092858151021,+ 1.552977284328));+#3591 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.552977284328));+#3592 = VECTOR('',#3593,1.);+#3593 = DIRECTION('',(-0.,-0.,-1.));+#3594 = ADVANCED_FACE('',(#3595),#3620,.T.);+#3595 = FACE_BOUND('',#3596,.T.);+#3596 = EDGE_LOOP('',(#3597,#3598,#3606,#3614));+#3597 = ORIENTED_EDGE('',*,*,#3574,.T.);+#3598 = ORIENTED_EDGE('',*,*,#3599,.T.);+#3599 = EDGE_CURVE('',#3567,#3600,#3602,.T.);+#3600 = VERTEX_POINT('',#3601);+#3601 = CARTESIAN_POINT('',(-1.809921380806E-02,-1.055205971292,+ 1.558931852983));+#3602 = LINE('',#3603,#3604);+#3603 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.558931852983));+#3604 = VECTOR('',#3605,1.);+#3605 = DIRECTION('',(0.353543800234,0.935417971452,0.));+#3606 = ORIENTED_EDGE('',*,*,#3607,.F.);+#3607 = EDGE_CURVE('',#3608,#3600,#3610,.T.);+#3608 = VERTEX_POINT('',#3609);+#3609 = CARTESIAN_POINT('',(-1.809921380806E-02,-1.055205971292,+ 1.552977284328));+#3610 = LINE('',#3611,#3612);+#3611 = CARTESIAN_POINT('',(-1.809921380806E-02,-1.055205971292,+ 1.552977284328));+#3612 = VECTOR('',#3613,1.);+#3613 = DIRECTION('',(0.,0.,1.));+#3614 = ORIENTED_EDGE('',*,*,#3615,.F.);+#3615 = EDGE_CURVE('',#3575,#3608,#3616,.T.);+#3616 = LINE('',#3617,#3618);+#3617 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.552977284328));+#3618 = VECTOR('',#3619,1.);+#3619 = DIRECTION('',(0.353543800234,0.935417971452,0.));+#3620 = PLANE('',#3621);+#3621 = AXIS2_PLACEMENT_3D('',#3622,#3623,#3624);+#3622 = CARTESIAN_POINT('',(-2.507722395093E-02,-1.073668623128,+ 1.552977284328));+#3623 = DIRECTION('',(-0.935417971452,0.353543800234,0.));+#3624 = DIRECTION('',(0.353543800234,0.935417971452,0.));+#3625 = ADVANCED_FACE('',(#3626),#3651,.T.);+#3626 = FACE_BOUND('',#3627,.T.);+#3627 = EDGE_LOOP('',(#3628,#3629,#3637,#3645));+#3628 = ORIENTED_EDGE('',*,*,#3607,.T.);+#3629 = ORIENTED_EDGE('',*,*,#3630,.T.);+#3630 = EDGE_CURVE('',#3600,#3631,#3633,.T.);+#3631 = VERTEX_POINT('',#3632);+#3632 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.558931852983));+#3633 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3634,#3635,#3636),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3634 = CARTESIAN_POINT('',(-1.809921380806E-02,-1.055205971292,+ 1.558931852983));+#3635 = CARTESIAN_POINT('',(-8.504449861619E-03,-1.029038433256,+ 1.558931852983));+#3636 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.558931852983));+#3637 = ORIENTED_EDGE('',*,*,#3638,.F.);+#3638 = EDGE_CURVE('',#3639,#3631,#3641,.T.);+#3639 = VERTEX_POINT('',#3640);+#3640 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.552977284328));+#3641 = LINE('',#3642,#3643);+#3642 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.552977284328));+#3643 = VECTOR('',#3644,1.);+#3644 = DIRECTION('',(0.,0.,1.));+#3645 = ORIENTED_EDGE('',*,*,#3646,.F.);+#3646 = EDGE_CURVE('',#3608,#3639,#3647,.T.);+#3647 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3648,#3649,#3650),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3648 = CARTESIAN_POINT('',(-1.809921380806E-02,-1.055205971292,+ 1.552977284328));+#3649 = CARTESIAN_POINT('',(-8.504449861619E-03,-1.029038433256,+ 1.552977284328));+#3650 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.552977284328));+#3651 = SURFACE_OF_LINEAR_EXTRUSION('',#3652,#3656);+#3652 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3653,#3654,#3655),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3653 = CARTESIAN_POINT('',(-1.809921380806E-02,-1.055205971292,+ 1.552977284328));+#3654 = CARTESIAN_POINT('',(-8.504449861619E-03,-1.029038433256,+ 1.552977284328));+#3655 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.552977284328));+#3656 = VECTOR('',#3657,1.);+#3657 = DIRECTION('',(-0.,-0.,-1.));+#3658 = ADVANCED_FACE('',(#3659),#3684,.T.);+#3659 = FACE_BOUND('',#3660,.T.);+#3660 = EDGE_LOOP('',(#3661,#3662,#3670,#3678));+#3661 = ORIENTED_EDGE('',*,*,#3638,.T.);+#3662 = ORIENTED_EDGE('',*,*,#3663,.T.);+#3663 = EDGE_CURVE('',#3631,#3664,#3666,.T.);+#3664 = VERTEX_POINT('',#3665);+#3665 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.558931852983));+#3666 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3667,#3668,#3669),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3667 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.558931852983));+#3668 = CARTESIAN_POINT('',(2.31873462039E-02,-1.004324647333,+ 1.558931852983));+#3669 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.558931852983));+#3670 = ORIENTED_EDGE('',*,*,#3671,.F.);+#3671 = EDGE_CURVE('',#3672,#3664,#3674,.T.);+#3672 = VERTEX_POINT('',#3673);+#3673 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.552977284328));+#3674 = LINE('',#3675,#3676);+#3675 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.552977284328));+#3676 = VECTOR('',#3677,1.);+#3677 = DIRECTION('',(0.,0.,1.));+#3678 = ORIENTED_EDGE('',*,*,#3679,.F.);+#3679 = EDGE_CURVE('',#3639,#3672,#3680,.T.);+#3680 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3681,#3682,#3683),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3681 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.552977284328));+#3682 = CARTESIAN_POINT('',(2.31873462039E-02,-1.004324647333,+ 1.552977284328));+#3683 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.552977284328));+#3684 = SURFACE_OF_LINEAR_EXTRUSION('',#3685,#3689);+#3685 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3686,#3687,#3688),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3686 = CARTESIAN_POINT('',(7.341448171141E-03,-1.016681540295,+ 1.552977284328));+#3687 = CARTESIAN_POINT('',(2.31873462039E-02,-1.004324647333,+ 1.552977284328));+#3688 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.552977284328));+#3689 = VECTOR('',#3690,1.);+#3690 = DIRECTION('',(-0.,-0.,-1.));+#3691 = ADVANCED_FACE('',(#3692),#3717,.T.);+#3692 = FACE_BOUND('',#3693,.T.);+#3693 = EDGE_LOOP('',(#3694,#3695,#3703,#3711));+#3694 = ORIENTED_EDGE('',*,*,#3671,.T.);+#3695 = ORIENTED_EDGE('',*,*,#3696,.T.);+#3696 = EDGE_CURVE('',#3664,#3697,#3699,.T.);+#3697 = VERTEX_POINT('',#3698);+#3698 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.558931852983));+#3699 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3700,#3701,#3702),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3700 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.558931852983));+#3701 = CARTESIAN_POINT('',(8.017442903732E-02,-1.004324647333,+ 1.558931852983));+#3702 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.558931852983));+#3703 = ORIENTED_EDGE('',*,*,#3704,.F.);+#3704 = EDGE_CURVE('',#3705,#3697,#3707,.T.);+#3705 = VERTEX_POINT('',#3706);+#3706 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.552977284328));+#3707 = LINE('',#3708,#3709);+#3708 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.552977284328));+#3709 = VECTOR('',#3710,1.);+#3710 = DIRECTION('',(0.,0.,1.));+#3711 = ORIENTED_EDGE('',*,*,#3712,.F.);+#3712 = EDGE_CURVE('',#3672,#3705,#3713,.T.);+#3713 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3714,#3715,#3716),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3714 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.552977284328));+#3715 = CARTESIAN_POINT('',(8.017442903732E-02,-1.004324647333,+ 1.552977284328));+#3716 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.552977284328));+#3717 = SURFACE_OF_LINEAR_EXTRUSION('',#3718,#3722);+#3718 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3719,#3720,#3721),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3719 = CARTESIAN_POINT('',(4.731963128132E-02,-1.004324647333,+ 1.552977284328));+#3720 = CARTESIAN_POINT('',(8.017442903732E-02,-1.004324647333,+ 1.552977284328));+#3721 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.552977284328));+#3722 = VECTOR('',#3723,1.);+#3723 = DIRECTION('',(-0.,-0.,-1.));+#3724 = ADVANCED_FACE('',(#3725),#3750,.T.);+#3725 = FACE_BOUND('',#3726,.T.);+#3726 = EDGE_LOOP('',(#3727,#3728,#3736,#3744));+#3727 = ORIENTED_EDGE('',*,*,#3704,.T.);+#3728 = ORIENTED_EDGE('',*,*,#3729,.T.);+#3729 = EDGE_CURVE('',#3697,#3730,#3732,.T.);+#3730 = VERTEX_POINT('',#3731);+#3731 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.558931852983));+#3732 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3733,#3734,#3735),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3733 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.558931852983));+#3734 = CARTESIAN_POINT('',(0.112593101159,-1.043139828753,+ 1.558931852983));+#3735 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.558931852983));+#3736 = ORIENTED_EDGE('',*,*,#3737,.F.);+#3737 = EDGE_CURVE('',#3738,#3730,#3740,.T.);+#3738 = VERTEX_POINT('',#3739);+#3739 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.552977284328));+#3740 = LINE('',#3741,#3742);+#3741 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.552977284328));+#3742 = VECTOR('',#3743,1.);+#3743 = DIRECTION('',(0.,0.,1.));+#3744 = ORIENTED_EDGE('',*,*,#3745,.F.);+#3745 = EDGE_CURVE('',#3705,#3738,#3746,.T.);+#3746 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3747,#3748,#3749),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3747 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.552977284328));+#3748 = CARTESIAN_POINT('',(0.112593101159,-1.043139828753,+ 1.552977284328));+#3749 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.552977284328));+#3750 = SURFACE_OF_LINEAR_EXTRUSION('',#3751,#3755);+#3751 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3752,#3753,#3754),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3752 = CARTESIAN_POINT('',(9.638376509835E-02,-1.023732238043,+ 1.552977284328));+#3753 = CARTESIAN_POINT('',(0.112593101159,-1.043139828753,+ 1.552977284328));+#3754 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.552977284328));+#3755 = VECTOR('',#3756,1.);+#3756 = DIRECTION('',(-0.,-0.,-1.));+#3757 = ADVANCED_FACE('',(#3758),#3783,.T.);+#3758 = FACE_BOUND('',#3759,.T.);+#3759 = EDGE_LOOP('',(#3760,#3761,#3769,#3777));+#3760 = ORIENTED_EDGE('',*,*,#3737,.T.);+#3761 = ORIENTED_EDGE('',*,*,#3762,.T.);+#3762 = EDGE_CURVE('',#3730,#3763,#3765,.T.);+#3763 = VERTEX_POINT('',#3764);+#3764 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.558931852983+ ));+#3765 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3766,#3767,#3768),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3766 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.558931852983));+#3767 = CARTESIAN_POINT('',(0.112593101159,-1.098527784262,+ 1.558931852983));+#3768 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.558931852983+ ));+#3769 = ORIENTED_EDGE('',*,*,#3770,.F.);+#3770 = EDGE_CURVE('',#3771,#3763,#3773,.T.);+#3771 = VERTEX_POINT('',#3772);+#3772 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.552977284328+ ));+#3773 = LINE('',#3774,#3775);+#3774 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.552977284328+ ));+#3775 = VECTOR('',#3776,1.);+#3776 = DIRECTION('',(0.,0.,1.));+#3777 = ORIENTED_EDGE('',*,*,#3778,.F.);+#3778 = EDGE_CURVE('',#3738,#3771,#3779,.T.);+#3779 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3780,#3781,#3782),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3780 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.552977284328));+#3781 = CARTESIAN_POINT('',(0.112593101159,-1.098527784262,+ 1.552977284328));+#3782 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.552977284328+ ));+#3783 = SURFACE_OF_LINEAR_EXTRUSION('',#3784,#3788);+#3784 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3785,#3786,#3787),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3785 = CARTESIAN_POINT('',(0.112593101159,-1.082391135807,+ 1.552977284328));+#3786 = CARTESIAN_POINT('',(0.112593101159,-1.098527784262,+ 1.552977284328));+#3787 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.552977284328+ ));+#3788 = VECTOR('',#3789,1.);+#3789 = DIRECTION('',(-0.,-0.,-1.));+#3790 = ADVANCED_FACE('',(#3791),#3816,.T.);+#3791 = FACE_BOUND('',#3792,.T.);+#3792 = EDGE_LOOP('',(#3793,#3794,#3802,#3810));+#3793 = ORIENTED_EDGE('',*,*,#3770,.T.);+#3794 = ORIENTED_EDGE('',*,*,#3795,.T.);+#3795 = EDGE_CURVE('',#3763,#3796,#3798,.T.);+#3796 = VERTEX_POINT('',#3797);+#3797 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.558931852983));+#3798 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3799,#3800,#3801),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3799 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.558931852983+ ));+#3800 = CARTESIAN_POINT('',(0.10488821496,-1.130946456384,1.558931852983+ ));+#3801 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.558931852983));+#3802 = ORIENTED_EDGE('',*,*,#3803,.F.);+#3803 = EDGE_CURVE('',#3804,#3796,#3806,.T.);+#3804 = VERTEX_POINT('',#3805);+#3805 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.552977284328));+#3806 = LINE('',#3807,#3808);+#3807 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.552977284328));+#3808 = VECTOR('',#3809,1.);+#3809 = DIRECTION('',(0.,0.,1.));+#3810 = ORIENTED_EDGE('',*,*,#3811,.F.);+#3811 = EDGE_CURVE('',#3771,#3804,#3812,.T.);+#3812 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3813,#3814,#3815),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3813 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.552977284328+ ));+#3814 = CARTESIAN_POINT('',(0.10488821496,-1.130946456384,1.552977284328+ ));+#3815 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.552977284328));+#3816 = SURFACE_OF_LINEAR_EXTRUSION('',#3817,#3821);+#3817 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3818,#3819,#3820),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3818 = CARTESIAN_POINT('',(0.10874065806,-1.114737120323,1.552977284328+ ));+#3819 = CARTESIAN_POINT('',(0.10488821496,-1.130946456384,1.552977284328+ ));+#3820 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.552977284328));+#3821 = VECTOR('',#3822,1.);+#3822 = DIRECTION('',(-0.,-0.,-1.));+#3823 = ADVANCED_FACE('',(#3824),#3849,.T.);+#3824 = FACE_BOUND('',#3825,.T.);+#3825 = EDGE_LOOP('',(#3826,#3827,#3835,#3843));+#3826 = ORIENTED_EDGE('',*,*,#3803,.T.);+#3827 = ORIENTED_EDGE('',*,*,#3828,.T.);+#3828 = EDGE_CURVE('',#3796,#3829,#3831,.T.);+#3829 = VERTEX_POINT('',#3830);+#3830 = CARTESIAN_POINT('',(5.29892645224E-02,-1.14606547836,+ 1.558931852983));+#3831 = LINE('',#3832,#3833);+#3832 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.558931852983));+#3833 = VECTOR('',#3834,1.);+#3834 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3835 = ORIENTED_EDGE('',*,*,#3836,.F.);+#3836 = EDGE_CURVE('',#3837,#3829,#3839,.T.);+#3837 = VERTEX_POINT('',#3838);+#3838 = CARTESIAN_POINT('',(5.29892645224E-02,-1.14606547836,+ 1.552977284328));+#3839 = LINE('',#3840,#3841);+#3840 = CARTESIAN_POINT('',(5.29892645224E-02,-1.14606547836,+ 1.552977284328));+#3841 = VECTOR('',#3842,1.);+#3842 = DIRECTION('',(0.,0.,1.));+#3843 = ORIENTED_EDGE('',*,*,#3844,.F.);+#3844 = EDGE_CURVE('',#3804,#3837,#3845,.T.);+#3845 = LINE('',#3846,#3847);+#3846 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.552977284328));+#3847 = VECTOR('',#3848,1.);+#3848 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3849 = PLANE('',#3850);+#3850 = AXIS2_PLACEMENT_3D('',#3851,#3852,#3853);+#3851 = CARTESIAN_POINT('',(9.732870397187E-02,-1.14606547836,+ 1.552977284328));+#3852 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3853 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3854 = ADVANCED_FACE('',(#3855),#3880,.T.);+#3855 = FACE_BOUND('',#3856,.T.);+#3856 = EDGE_LOOP('',(#3857,#3858,#3866,#3874));+#3857 = ORIENTED_EDGE('',*,*,#3836,.T.);+#3858 = ORIENTED_EDGE('',*,*,#3859,.T.);+#3859 = EDGE_CURVE('',#3829,#3860,#3862,.T.);+#3860 = VERTEX_POINT('',#3861);+#3861 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.558931852983));+#3862 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3863,#3864,#3865),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3863 = CARTESIAN_POINT('',(5.29892645224E-02,-1.14606547836,+ 1.558931852983));+#3864 = CARTESIAN_POINT('',(6.520078227242E-02,-1.128911203426,+ 1.558931852983));+#3865 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.558931852983));+#3866 = ORIENTED_EDGE('',*,*,#3867,.F.);+#3867 = EDGE_CURVE('',#3868,#3860,#3870,.T.);+#3868 = VERTEX_POINT('',#3869);+#3869 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.552977284328));+#3870 = LINE('',#3871,#3872);+#3871 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.552977284328));+#3872 = VECTOR('',#3873,1.);+#3873 = DIRECTION('',(0.,0.,1.));+#3874 = ORIENTED_EDGE('',*,*,#3875,.F.);+#3875 = EDGE_CURVE('',#3837,#3868,#3876,.T.);+#3876 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3877,#3878,#3879),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3877 = CARTESIAN_POINT('',(5.29892645224E-02,-1.14606547836,+ 1.552977284328));+#3878 = CARTESIAN_POINT('',(6.520078227242E-02,-1.128911203426,+ 1.552977284328));+#3879 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.552977284328));+#3880 = SURFACE_OF_LINEAR_EXTRUSION('',#3881,#3885);+#3881 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3882,#3883,#3884),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3882 = CARTESIAN_POINT('',(5.29892645224E-02,-1.14606547836,+ 1.552977284328));+#3883 = CARTESIAN_POINT('',(6.520078227242E-02,-1.128911203426,+ 1.552977284328));+#3884 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.552977284328));+#3885 = VECTOR('',#3886,1.);+#3886 = DIRECTION('',(-0.,-0.,-1.));+#3887 = ADVANCED_FACE('',(#3888),#3913,.T.);+#3888 = FACE_BOUND('',#3889,.T.);+#3889 = EDGE_LOOP('',(#3890,#3891,#3899,#3907));+#3890 = ORIENTED_EDGE('',*,*,#3867,.T.);+#3891 = ORIENTED_EDGE('',*,*,#3892,.T.);+#3892 = EDGE_CURVE('',#3860,#3893,#3895,.T.);+#3893 = VERTEX_POINT('',#3894);+#3894 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.558931852983));+#3895 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3896,#3897,#3898),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3896 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.558931852983));+#3897 = CARTESIAN_POINT('',(7.712154959981E-02,-1.096783281726,+ 1.558931852983));+#3898 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.558931852983));+#3899 = ORIENTED_EDGE('',*,*,#3900,.F.);+#3900 = EDGE_CURVE('',#3901,#3893,#3903,.T.);+#3901 = VERTEX_POINT('',#3902);+#3902 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.552977284328));+#3903 = LINE('',#3904,#3905);+#3904 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.552977284328));+#3905 = VECTOR('',#3906,1.);+#3906 = DIRECTION('',(0.,0.,1.));+#3907 = ORIENTED_EDGE('',*,*,#3908,.F.);+#3908 = EDGE_CURVE('',#3868,#3901,#3909,.T.);+#3909 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3910,#3911,#3912),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3910 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.552977284328));+#3911 = CARTESIAN_POINT('',(7.712154959981E-02,-1.096783281726,+ 1.552977284328));+#3912 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.552977284328));+#3913 = SURFACE_OF_LINEAR_EXTRUSION('',#3914,#3918);+#3914 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3915,#3916,#3917),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3915 = CARTESIAN_POINT('',(7.116116593611E-02,-1.112847242576,+ 1.552977284328));+#3916 = CARTESIAN_POINT('',(7.712154959981E-02,-1.096783281726,+ 1.552977284328));+#3917 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.552977284328));+#3918 = VECTOR('',#3919,1.);+#3919 = DIRECTION('',(-0.,-0.,-1.));+#3920 = ADVANCED_FACE('',(#3921),#3946,.T.);+#3921 = FACE_BOUND('',#3922,.T.);+#3922 = EDGE_LOOP('',(#3923,#3924,#3932,#3940));+#3923 = ORIENTED_EDGE('',*,*,#3900,.T.);+#3924 = ORIENTED_EDGE('',*,*,#3925,.T.);+#3925 = EDGE_CURVE('',#3893,#3926,#3928,.T.);+#3926 = VERTEX_POINT('',#3927);+#3927 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.558931852983));+#3928 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3929,#3930,#3931),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3929 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.558931852983));+#3930 = CARTESIAN_POINT('',(7.712154959981E-02,-1.065236860872,+ 1.558931852983));+#3931 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.558931852983));+#3932 = ORIENTED_EDGE('',*,*,#3933,.F.);+#3933 = EDGE_CURVE('',#3934,#3926,#3936,.T.);+#3934 = VERTEX_POINT('',#3935);+#3935 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.552977284328));+#3936 = LINE('',#3937,#3938);+#3937 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.552977284328));+#3938 = VECTOR('',#3939,1.);+#3939 = DIRECTION('',(0.,0.,1.));+#3940 = ORIENTED_EDGE('',*,*,#3941,.F.);+#3941 = EDGE_CURVE('',#3901,#3934,#3942,.T.);+#3942 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3943,#3944,#3945),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3943 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.552977284328));+#3944 = CARTESIAN_POINT('',(7.712154959981E-02,-1.065236860872,+ 1.552977284328));+#3945 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.552977284328));+#3946 = SURFACE_OF_LINEAR_EXTRUSION('',#3947,#3951);+#3947 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3948,#3949,#3950),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3948 = CARTESIAN_POINT('',(7.712154959981E-02,-1.081082758905,+ 1.552977284328));+#3949 = CARTESIAN_POINT('',(7.712154959981E-02,-1.065236860872,+ 1.552977284328));+#3950 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.552977284328));+#3951 = VECTOR('',#3952,1.);+#3952 = DIRECTION('',(-0.,-0.,-1.));+#3953 = ADVANCED_FACE('',(#3954),#3979,.T.);+#3954 = FACE_BOUND('',#3955,.T.);+#3955 = EDGE_LOOP('',(#3956,#3957,#3965,#3973));+#3956 = ORIENTED_EDGE('',*,*,#3933,.T.);+#3957 = ORIENTED_EDGE('',*,*,#3958,.T.);+#3958 = EDGE_CURVE('',#3926,#3959,#3961,.T.);+#3959 = VERTEX_POINT('',#3960);+#3960 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.558931852983));+#3961 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3962,#3963,#3964),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3962 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.558931852983));+#3963 = CARTESIAN_POINT('',(6.272940368015E-02,-1.047791835515,+ 1.558931852983));+#3964 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.558931852983));+#3965 = ORIENTED_EDGE('',*,*,#3966,.F.);+#3966 = EDGE_CURVE('',#3967,#3959,#3969,.T.);+#3967 = VERTEX_POINT('',#3968);+#3968 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.552977284328));+#3969 = LINE('',#3970,#3971);+#3970 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.552977284328));+#3971 = VECTOR('',#3972,1.);+#3972 = DIRECTION('',(0.,0.,1.));+#3973 = ORIENTED_EDGE('',*,*,#3974,.F.);+#3974 = EDGE_CURVE('',#3934,#3967,#3975,.T.);+#3975 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3976,#3977,#3978),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3976 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.552977284328));+#3977 = CARTESIAN_POINT('',(6.272940368015E-02,-1.047791835515,+ 1.552977284328));+#3978 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.552977284328));+#3979 = SURFACE_OF_LINEAR_EXTRUSION('',#3980,#3984);+#3980 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3981,#3982,#3983),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3981 = CARTESIAN_POINT('',(6.992547663998E-02,-1.056514348193,+ 1.552977284328));+#3982 = CARTESIAN_POINT('',(6.272940368015E-02,-1.047791835515,+ 1.552977284328));+#3983 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.552977284328));+#3984 = VECTOR('',#3985,1.);+#3985 = DIRECTION('',(-0.,-0.,-1.));+#3986 = ADVANCED_FACE('',(#3987),#4012,.T.);+#3987 = FACE_BOUND('',#3988,.T.);+#3988 = EDGE_LOOP('',(#3989,#3990,#3998,#4006));+#3989 = ORIENTED_EDGE('',*,*,#3966,.T.);+#3990 = ORIENTED_EDGE('',*,*,#3991,.T.);+#3991 = EDGE_CURVE('',#3959,#3992,#3994,.T.);+#3992 = VERTEX_POINT('',#3993);+#3993 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.558931852983));+#3994 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3995,#3996,#3997),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3995 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.558931852983));+#3996 = CARTESIAN_POINT('',(4.005087071583E-02,-1.047791835515,+ 1.558931852983));+#3997 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.558931852983));+#3998 = ORIENTED_EDGE('',*,*,#3999,.F.);+#3999 = EDGE_CURVE('',#4000,#3992,#4002,.T.);+#4000 = VERTEX_POINT('',#4001);+#4001 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.552977284328));+#4002 = LINE('',#4003,#4004);+#4003 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.552977284328));+#4004 = VECTOR('',#4005,1.);+#4005 = DIRECTION('',(0.,0.,1.));+#4006 = ORIENTED_EDGE('',*,*,#4007,.F.);+#4007 = EDGE_CURVE('',#3967,#4000,#4008,.T.);+#4008 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4009,#4010,#4011),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4009 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.552977284328));+#4010 = CARTESIAN_POINT('',(4.005087071583E-02,-1.047791835515,+ 1.552977284328));+#4011 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.552977284328));+#4012 = SURFACE_OF_LINEAR_EXTRUSION('',#4013,#4017);+#4013 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4014,#4015,#4016),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4014 = CARTESIAN_POINT('',(4.979100987358E-02,-1.047791835515,+ 1.552977284328));+#4015 = CARTESIAN_POINT('',(4.005087071583E-02,-1.047791835515,+ 1.552977284328));+#4016 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.552977284328));+#4017 = VECTOR('',#4018,1.);+#4018 = DIRECTION('',(-0.,-0.,-1.));+#4019 = ADVANCED_FACE('',(#4020),#4036,.T.);+#4020 = FACE_BOUND('',#4021,.T.);+#4021 = EDGE_LOOP('',(#4022,#4023,#4029,#4030));+#4022 = ORIENTED_EDGE('',*,*,#3999,.T.);+#4023 = ORIENTED_EDGE('',*,*,#4024,.T.);+#4024 = EDGE_CURVE('',#3992,#3134,#4025,.T.);+#4025 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4026,#4027,#4028),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4026 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.558931852983));+#4027 = CARTESIAN_POINT('',(2.536797437355E-02,-1.05942185242,+ 1.558931852983));+#4028 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.558931852983));+#4029 = ORIENTED_EDGE('',*,*,#3131,.F.);+#4030 = ORIENTED_EDGE('',*,*,#4031,.F.);+#4031 = EDGE_CURVE('',#4000,#3132,#4032,.T.);+#4032 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4033,#4034,#4035),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4033 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.552977284328));+#4034 = CARTESIAN_POINT('',(2.536797437355E-02,-1.05942185242,+ 1.552977284328));+#4035 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.552977284328));+#4036 = SURFACE_OF_LINEAR_EXTRUSION('',#4037,#4041);+#4037 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4038,#4039,#4040),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4038 = CARTESIAN_POINT('',(3.270942254469E-02,-1.053606843967,+ 1.552977284328));+#4039 = CARTESIAN_POINT('',(2.536797437355E-02,-1.05942185242,+ 1.552977284328));+#4040 = CARTESIAN_POINT('',(2.115209324557E-02,-1.070470368479,+ 1.552977284328));+#4041 = VECTOR('',#4042,1.);+#4042 = DIRECTION('',(-0.,-0.,-1.));+#4043 = ADVANCED_FACE('',(#4044),#4074,.F.);+#4044 = FACE_BOUND('',#4045,.T.);+#4045 = EDGE_LOOP('',(#4046,#4047,#4048,#4049,#4050,#4051,#4052,#4053,+ #4054,#4055,#4056,#4057,#4058,#4059,#4060,#4061,#4062,#4063,#4064,+ #4065,#4066,#4067,#4068,#4069,#4070,#4071,#4072,#4073));+#4046 = ORIENTED_EDGE('',*,*,#3157,.T.);+#4047 = ORIENTED_EDGE('',*,*,#3188,.T.);+#4048 = ORIENTED_EDGE('',*,*,#3221,.T.);+#4049 = ORIENTED_EDGE('',*,*,#3254,.T.);+#4050 = ORIENTED_EDGE('',*,*,#3287,.T.);+#4051 = ORIENTED_EDGE('',*,*,#3320,.T.);+#4052 = ORIENTED_EDGE('',*,*,#3353,.T.);+#4053 = ORIENTED_EDGE('',*,*,#3386,.T.);+#4054 = ORIENTED_EDGE('',*,*,#3417,.T.);+#4055 = ORIENTED_EDGE('',*,*,#3450,.T.);+#4056 = ORIENTED_EDGE('',*,*,#3483,.T.);+#4057 = ORIENTED_EDGE('',*,*,#3516,.T.);+#4058 = ORIENTED_EDGE('',*,*,#3549,.T.);+#4059 = ORIENTED_EDGE('',*,*,#3582,.T.);+#4060 = ORIENTED_EDGE('',*,*,#3615,.T.);+#4061 = ORIENTED_EDGE('',*,*,#3646,.T.);+#4062 = ORIENTED_EDGE('',*,*,#3679,.T.);+#4063 = ORIENTED_EDGE('',*,*,#3712,.T.);+#4064 = ORIENTED_EDGE('',*,*,#3745,.T.);+#4065 = ORIENTED_EDGE('',*,*,#3778,.T.);+#4066 = ORIENTED_EDGE('',*,*,#3811,.T.);+#4067 = ORIENTED_EDGE('',*,*,#3844,.T.);+#4068 = ORIENTED_EDGE('',*,*,#3875,.T.);+#4069 = ORIENTED_EDGE('',*,*,#3908,.T.);+#4070 = ORIENTED_EDGE('',*,*,#3941,.T.);+#4071 = ORIENTED_EDGE('',*,*,#3974,.T.);+#4072 = ORIENTED_EDGE('',*,*,#4007,.T.);+#4073 = ORIENTED_EDGE('',*,*,#4031,.T.);+#4074 = PLANE('',#4075);+#4075 = AXIS2_PLACEMENT_3D('',#4076,#4077,#4078);+#4076 = CARTESIAN_POINT('',(0.108377220031,-1.165691131887,+ 1.552977284328));+#4077 = DIRECTION('',(0.,0.,1.));+#4078 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4079 = ADVANCED_FACE('',(#4080),#4110,.T.);+#4080 = FACE_BOUND('',#4081,.F.);+#4081 = EDGE_LOOP('',(#4082,#4083,#4084,#4085,#4086,#4087,#4088,#4089,+ #4090,#4091,#4092,#4093,#4094,#4095,#4096,#4097,#4098,#4099,#4100,+ #4101,#4102,#4103,#4104,#4105,#4106,#4107,#4108,#4109));+#4082 = ORIENTED_EDGE('',*,*,#3141,.T.);+#4083 = ORIENTED_EDGE('',*,*,#3172,.T.);+#4084 = ORIENTED_EDGE('',*,*,#3205,.T.);+#4085 = ORIENTED_EDGE('',*,*,#3238,.T.);+#4086 = ORIENTED_EDGE('',*,*,#3271,.T.);+#4087 = ORIENTED_EDGE('',*,*,#3304,.T.);+#4088 = ORIENTED_EDGE('',*,*,#3337,.T.);+#4089 = ORIENTED_EDGE('',*,*,#3370,.T.);+#4090 = ORIENTED_EDGE('',*,*,#3401,.T.);+#4091 = ORIENTED_EDGE('',*,*,#3434,.T.);+#4092 = ORIENTED_EDGE('',*,*,#3467,.T.);+#4093 = ORIENTED_EDGE('',*,*,#3500,.T.);+#4094 = ORIENTED_EDGE('',*,*,#3533,.T.);+#4095 = ORIENTED_EDGE('',*,*,#3566,.T.);+#4096 = ORIENTED_EDGE('',*,*,#3599,.T.);+#4097 = ORIENTED_EDGE('',*,*,#3630,.T.);+#4098 = ORIENTED_EDGE('',*,*,#3663,.T.);+#4099 = ORIENTED_EDGE('',*,*,#3696,.T.);+#4100 = ORIENTED_EDGE('',*,*,#3729,.T.);+#4101 = ORIENTED_EDGE('',*,*,#3762,.T.);+#4102 = ORIENTED_EDGE('',*,*,#3795,.T.);+#4103 = ORIENTED_EDGE('',*,*,#3828,.T.);+#4104 = ORIENTED_EDGE('',*,*,#3859,.T.);+#4105 = ORIENTED_EDGE('',*,*,#3892,.T.);+#4106 = ORIENTED_EDGE('',*,*,#3925,.T.);+#4107 = ORIENTED_EDGE('',*,*,#3958,.T.);+#4108 = ORIENTED_EDGE('',*,*,#3991,.T.);+#4109 = ORIENTED_EDGE('',*,*,#4024,.T.);+#4110 = PLANE('',#4111);+#4111 = AXIS2_PLACEMENT_3D('',#4112,#4113,#4114);+#4112 = CARTESIAN_POINT('',(0.108377220031,-1.165691131887,+ 1.558931852983));+#4113 = DIRECTION('',(0.,0.,1.));+#4114 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4115 = MANIFOLD_SOLID_BREP('',#4116);+#4116 = CLOSED_SHELL('',(#4117,#4157,#4188,#4219,#4250,#4281,#4312,#4343+ ,#4365,#4381));+#4117 = ADVANCED_FACE('',(#4118),#4152,.T.);+#4118 = FACE_BOUND('',#4119,.T.);+#4119 = EDGE_LOOP('',(#4120,#4130,#4138,#4146));+#4120 = ORIENTED_EDGE('',*,*,#4121,.T.);+#4121 = EDGE_CURVE('',#4122,#4124,#4126,.T.);+#4122 = VERTEX_POINT('',#4123);+#4123 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.875376834902,+ 1.552977284328));+#4124 = VERTEX_POINT('',#4125);+#4125 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.875376834902,+ 1.558931852983));+#4126 = LINE('',#4127,#4128);+#4127 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.875376834902,+ 1.552977284328));+#4128 = VECTOR('',#4129,1.);+#4129 = DIRECTION('',(0.,0.,1.));+#4130 = ORIENTED_EDGE('',*,*,#4131,.T.);+#4131 = EDGE_CURVE('',#4124,#4132,#4134,.T.);+#4132 = VERTEX_POINT('',#4133);+#4133 = CARTESIAN_POINT('',(0.108377220031,-0.875376834902,+ 1.558931852983));+#4134 = LINE('',#4135,#4136);+#4135 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.875376834902,+ 1.558931852983));+#4136 = VECTOR('',#4137,1.);+#4137 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4138 = ORIENTED_EDGE('',*,*,#4139,.F.);+#4139 = EDGE_CURVE('',#4140,#4132,#4142,.T.);+#4140 = VERTEX_POINT('',#4141);+#4141 = CARTESIAN_POINT('',(0.108377220031,-0.875376834902,+ 1.552977284328));+#4142 = LINE('',#4143,#4144);+#4143 = CARTESIAN_POINT('',(0.108377220031,-0.875376834902,+ 1.552977284328));+#4144 = VECTOR('',#4145,1.);+#4145 = DIRECTION('',(0.,0.,1.));+#4146 = ORIENTED_EDGE('',*,*,#4147,.F.);+#4147 = EDGE_CURVE('',#4122,#4140,#4148,.T.);+#4148 = LINE('',#4149,#4150);+#4149 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.875376834902,+ 1.552977284328));+#4150 = VECTOR('',#4151,1.);+#4151 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4152 = PLANE('',#4153);+#4153 = AXIS2_PLACEMENT_3D('',#4154,#4155,#4156);+#4154 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.875376834902,+ 1.552977284328));+#4155 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#4156 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4157 = ADVANCED_FACE('',(#4158),#4183,.T.);+#4158 = FACE_BOUND('',#4159,.T.);+#4159 = EDGE_LOOP('',(#4160,#4161,#4169,#4177));+#4160 = ORIENTED_EDGE('',*,*,#4139,.T.);+#4161 = ORIENTED_EDGE('',*,*,#4162,.T.);+#4162 = EDGE_CURVE('',#4132,#4163,#4165,.T.);+#4163 = VERTEX_POINT('',#4164);+#4164 = CARTESIAN_POINT('',(0.108377220031,-0.918262522238,+ 1.558931852983));+#4165 = LINE('',#4166,#4167);+#4166 = CARTESIAN_POINT('',(0.108377220031,-0.875376834902,+ 1.558931852983));+#4167 = VECTOR('',#4168,1.);+#4168 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4169 = ORIENTED_EDGE('',*,*,#4170,.F.);+#4170 = EDGE_CURVE('',#4171,#4163,#4173,.T.);+#4171 = VERTEX_POINT('',#4172);+#4172 = CARTESIAN_POINT('',(0.108377220031,-0.918262522238,+ 1.552977284328));+#4173 = LINE('',#4174,#4175);+#4174 = CARTESIAN_POINT('',(0.108377220031,-0.918262522238,+ 1.552977284328));+#4175 = VECTOR('',#4176,1.);+#4176 = DIRECTION('',(0.,0.,1.));+#4177 = ORIENTED_EDGE('',*,*,#4178,.F.);+#4178 = EDGE_CURVE('',#4140,#4171,#4179,.T.);+#4179 = LINE('',#4180,#4181);+#4180 = CARTESIAN_POINT('',(0.108377220031,-0.875376834902,+ 1.552977284328));+#4181 = VECTOR('',#4182,1.);+#4182 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4183 = PLANE('',#4184);+#4184 = AXIS2_PLACEMENT_3D('',#4185,#4186,#4187);+#4185 = CARTESIAN_POINT('',(0.108377220031,-0.875376834902,+ 1.552977284328));+#4186 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4187 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4188 = ADVANCED_FACE('',(#4189),#4214,.T.);+#4189 = FACE_BOUND('',#4190,.T.);+#4190 = EDGE_LOOP('',(#4191,#4192,#4200,#4208));+#4191 = ORIENTED_EDGE('',*,*,#4170,.T.);+#4192 = ORIENTED_EDGE('',*,*,#4193,.T.);+#4193 = EDGE_CURVE('',#4163,#4194,#4196,.T.);+#4194 = VERTEX_POINT('',#4195);+#4195 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.918262522238,+ 1.558931852983));+#4196 = LINE('',#4197,#4198);+#4197 = CARTESIAN_POINT('',(0.108377220031,-0.918262522238,+ 1.558931852983));+#4198 = VECTOR('',#4199,1.);+#4199 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4200 = ORIENTED_EDGE('',*,*,#4201,.F.);+#4201 = EDGE_CURVE('',#4202,#4194,#4204,.T.);+#4202 = VERTEX_POINT('',#4203);+#4203 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.918262522238,+ 1.552977284328));+#4204 = LINE('',#4205,#4206);+#4205 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.918262522238,+ 1.552977284328));+#4206 = VECTOR('',#4207,1.);+#4207 = DIRECTION('',(0.,0.,1.));+#4208 = ORIENTED_EDGE('',*,*,#4209,.F.);+#4209 = EDGE_CURVE('',#4171,#4202,#4210,.T.);+#4210 = LINE('',#4211,#4212);+#4211 = CARTESIAN_POINT('',(0.108377220031,-0.918262522238,+ 1.552977284328));+#4212 = VECTOR('',#4213,1.);+#4213 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4214 = PLANE('',#4215);+#4215 = AXIS2_PLACEMENT_3D('',#4216,#4217,#4218);+#4216 = CARTESIAN_POINT('',(0.108377220031,-0.918262522238,+ 1.552977284328));+#4217 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4218 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4219 = ADVANCED_FACE('',(#4220),#4245,.T.);+#4220 = FACE_BOUND('',#4221,.T.);+#4221 = EDGE_LOOP('',(#4222,#4223,#4231,#4239));+#4222 = ORIENTED_EDGE('',*,*,#4201,.T.);+#4223 = ORIENTED_EDGE('',*,*,#4224,.T.);+#4224 = EDGE_CURVE('',#4194,#4225,#4227,.T.);+#4225 = VERTEX_POINT('',#4226);+#4226 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.973359727324,+ 1.558931852983));+#4227 = LINE('',#4228,#4229);+#4228 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.918262522238,+ 1.558931852983));+#4229 = VECTOR('',#4230,1.);+#4230 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4231 = ORIENTED_EDGE('',*,*,#4232,.F.);+#4232 = EDGE_CURVE('',#4233,#4225,#4235,.T.);+#4233 = VERTEX_POINT('',#4234);+#4234 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.973359727324,+ 1.552977284328));+#4235 = LINE('',#4236,#4237);+#4236 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.973359727324,+ 1.552977284328));+#4237 = VECTOR('',#4238,1.);+#4238 = DIRECTION('',(0.,0.,1.));+#4239 = ORIENTED_EDGE('',*,*,#4240,.F.);+#4240 = EDGE_CURVE('',#4202,#4233,#4241,.T.);+#4241 = LINE('',#4242,#4243);+#4242 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.918262522238,+ 1.552977284328));+#4243 = VECTOR('',#4244,1.);+#4244 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4245 = PLANE('',#4246);+#4246 = AXIS2_PLACEMENT_3D('',#4247,#4248,#4249);+#4247 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.918262522238,+ 1.552977284328));+#4248 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4249 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4250 = ADVANCED_FACE('',(#4251),#4276,.T.);+#4251 = FACE_BOUND('',#4252,.T.);+#4252 = EDGE_LOOP('',(#4253,#4254,#4262,#4270));+#4253 = ORIENTED_EDGE('',*,*,#4232,.T.);+#4254 = ORIENTED_EDGE('',*,*,#4255,.T.);+#4255 = EDGE_CURVE('',#4225,#4256,#4258,.T.);+#4256 = VERTEX_POINT('',#4257);+#4257 = CARTESIAN_POINT('',(-0.108667970454,-0.973359727324,+ 1.558931852983));+#4258 = LINE('',#4259,#4260);+#4259 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.973359727324,+ 1.558931852983));+#4260 = VECTOR('',#4261,1.);+#4261 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4262 = ORIENTED_EDGE('',*,*,#4263,.F.);+#4263 = EDGE_CURVE('',#4264,#4256,#4266,.T.);+#4264 = VERTEX_POINT('',#4265);+#4265 = CARTESIAN_POINT('',(-0.108667970454,-0.973359727324,+ 1.552977284328));+#4266 = LINE('',#4267,#4268);+#4267 = CARTESIAN_POINT('',(-0.108667970454,-0.973359727324,+ 1.552977284328));+#4268 = VECTOR('',#4269,1.);+#4269 = DIRECTION('',(0.,0.,1.));+#4270 = ORIENTED_EDGE('',*,*,#4271,.F.);+#4271 = EDGE_CURVE('',#4233,#4264,#4272,.T.);+#4272 = LINE('',#4273,#4274);+#4273 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.973359727324,+ 1.552977284328));+#4274 = VECTOR('',#4275,1.);+#4275 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4276 = PLANE('',#4277);+#4277 = AXIS2_PLACEMENT_3D('',#4278,#4279,#4280);+#4278 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.973359727324,+ 1.552977284328));+#4279 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4280 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4281 = ADVANCED_FACE('',(#4282),#4307,.T.);+#4282 = FACE_BOUND('',#4283,.T.);+#4283 = EDGE_LOOP('',(#4284,#4285,#4293,#4301));+#4284 = ORIENTED_EDGE('',*,*,#4263,.T.);+#4285 = ORIENTED_EDGE('',*,*,#4286,.T.);+#4286 = EDGE_CURVE('',#4256,#4287,#4289,.T.);+#4287 = VERTEX_POINT('',#4288);+#4288 = CARTESIAN_POINT('',(-0.108667970454,-0.820279629815,+ 1.558931852983));+#4289 = LINE('',#4290,#4291);+#4290 = CARTESIAN_POINT('',(-0.108667970454,-0.973359727324,+ 1.558931852983));+#4291 = VECTOR('',#4292,1.);+#4292 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4293 = ORIENTED_EDGE('',*,*,#4294,.F.);+#4294 = EDGE_CURVE('',#4295,#4287,#4297,.T.);+#4295 = VERTEX_POINT('',#4296);+#4296 = CARTESIAN_POINT('',(-0.108667970454,-0.820279629815,+ 1.552977284328));+#4297 = LINE('',#4298,#4299);+#4298 = CARTESIAN_POINT('',(-0.108667970454,-0.820279629815,+ 1.552977284328));+#4299 = VECTOR('',#4300,1.);+#4300 = DIRECTION('',(0.,0.,1.));+#4301 = ORIENTED_EDGE('',*,*,#4302,.F.);+#4302 = EDGE_CURVE('',#4264,#4295,#4303,.T.);+#4303 = LINE('',#4304,#4305);+#4304 = CARTESIAN_POINT('',(-0.108667970454,-0.973359727324,+ 1.552977284328));+#4305 = VECTOR('',#4306,1.);+#4306 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4307 = PLANE('',#4308);+#4308 = AXIS2_PLACEMENT_3D('',#4309,#4310,#4311);+#4309 = CARTESIAN_POINT('',(-0.108667970454,-0.973359727324,+ 1.552977284328));+#4310 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4311 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4312 = ADVANCED_FACE('',(#4313),#4338,.T.);+#4313 = FACE_BOUND('',#4314,.T.);+#4314 = EDGE_LOOP('',(#4315,#4316,#4324,#4332));+#4315 = ORIENTED_EDGE('',*,*,#4294,.T.);+#4316 = ORIENTED_EDGE('',*,*,#4317,.T.);+#4317 = EDGE_CURVE('',#4287,#4318,#4320,.T.);+#4318 = VERTEX_POINT('',#4319);+#4319 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.820279629815,+ 1.558931852983));+#4320 = LINE('',#4321,#4322);+#4321 = CARTESIAN_POINT('',(-0.108667970454,-0.820279629815,+ 1.558931852983));+#4322 = VECTOR('',#4323,1.);+#4323 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4324 = ORIENTED_EDGE('',*,*,#4325,.F.);+#4325 = EDGE_CURVE('',#4326,#4318,#4328,.T.);+#4326 = VERTEX_POINT('',#4327);+#4327 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.820279629815,+ 1.552977284328));+#4328 = LINE('',#4329,#4330);+#4329 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.820279629815,+ 1.552977284328));+#4330 = VECTOR('',#4331,1.);+#4331 = DIRECTION('',(0.,0.,1.));+#4332 = ORIENTED_EDGE('',*,*,#4333,.F.);+#4333 = EDGE_CURVE('',#4295,#4326,#4334,.T.);+#4334 = LINE('',#4335,#4336);+#4335 = CARTESIAN_POINT('',(-0.108667970454,-0.820279629815,+ 1.552977284328));+#4336 = VECTOR('',#4337,1.);+#4337 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4338 = PLANE('',#4339);+#4339 = AXIS2_PLACEMENT_3D('',#4340,#4341,#4342);+#4340 = CARTESIAN_POINT('',(-0.108667970454,-0.820279629815,+ 1.552977284328));+#4341 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#4342 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4343 = ADVANCED_FACE('',(#4344),#4360,.T.);+#4344 = FACE_BOUND('',#4345,.T.);+#4345 = EDGE_LOOP('',(#4346,#4347,#4353,#4354));+#4346 = ORIENTED_EDGE('',*,*,#4325,.T.);+#4347 = ORIENTED_EDGE('',*,*,#4348,.T.);+#4348 = EDGE_CURVE('',#4318,#4124,#4349,.T.);+#4349 = LINE('',#4350,#4351);+#4350 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.820279629815,+ 1.558931852983));+#4351 = VECTOR('',#4352,1.);+#4352 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4353 = ORIENTED_EDGE('',*,*,#4121,.F.);+#4354 = ORIENTED_EDGE('',*,*,#4355,.F.);+#4355 = EDGE_CURVE('',#4326,#4122,#4356,.T.);+#4356 = LINE('',#4357,#4358);+#4357 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.820279629815,+ 1.552977284328));+#4358 = VECTOR('',#4359,1.);+#4359 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4360 = PLANE('',#4361);+#4361 = AXIS2_PLACEMENT_3D('',#4362,#4363,#4364);+#4362 = CARTESIAN_POINT('',(-7.116116593611E-02,-0.820279629815,+ 1.552977284328));+#4363 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4364 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4365 = ADVANCED_FACE('',(#4366),#4376,.F.);+#4366 = FACE_BOUND('',#4367,.T.);+#4367 = EDGE_LOOP('',(#4368,#4369,#4370,#4371,#4372,#4373,#4374,#4375));+#4368 = ORIENTED_EDGE('',*,*,#4147,.T.);+#4369 = ORIENTED_EDGE('',*,*,#4178,.T.);+#4370 = ORIENTED_EDGE('',*,*,#4209,.T.);+#4371 = ORIENTED_EDGE('',*,*,#4240,.T.);+#4372 = ORIENTED_EDGE('',*,*,#4271,.T.);+#4373 = ORIENTED_EDGE('',*,*,#4302,.T.);+#4374 = ORIENTED_EDGE('',*,*,#4333,.T.);+#4375 = ORIENTED_EDGE('',*,*,#4355,.T.);+#4376 = PLANE('',#4377);+#4377 = AXIS2_PLACEMENT_3D('',#4378,#4379,#4380);+#4378 = CARTESIAN_POINT('',(0.108377220031,-0.986443496342,+ 1.552977284328));+#4379 = DIRECTION('',(0.,0.,1.));+#4380 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4381 = ADVANCED_FACE('',(#4382),#4392,.T.);+#4382 = FACE_BOUND('',#4383,.F.);+#4383 = EDGE_LOOP('',(#4384,#4385,#4386,#4387,#4388,#4389,#4390,#4391));+#4384 = ORIENTED_EDGE('',*,*,#4131,.T.);+#4385 = ORIENTED_EDGE('',*,*,#4162,.T.);+#4386 = ORIENTED_EDGE('',*,*,#4193,.T.);+#4387 = ORIENTED_EDGE('',*,*,#4224,.T.);+#4388 = ORIENTED_EDGE('',*,*,#4255,.T.);+#4389 = ORIENTED_EDGE('',*,*,#4286,.T.);+#4390 = ORIENTED_EDGE('',*,*,#4317,.T.);+#4391 = ORIENTED_EDGE('',*,*,#4348,.T.);+#4392 = PLANE('',#4393);+#4393 = AXIS2_PLACEMENT_3D('',#4394,#4395,#4396);+#4394 = CARTESIAN_POINT('',(0.108377220031,-0.986443496342,+ 1.558931852983));+#4395 = DIRECTION('',(0.,0.,1.));+#4396 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4397 = MANIFOLD_SOLID_BREP('',#4398);+#4398 = CLOSED_SHELL('',(#4399,#4439,#4470,#4501,#4532,#4563,#4594,#4625+ ,#4656,#4687,#4718,#4749,#4780,#4802,#4823));+#4399 = ADVANCED_FACE('',(#4400),#4434,.T.);+#4400 = FACE_BOUND('',#4401,.T.);+#4401 = EDGE_LOOP('',(#4402,#4412,#4420,#4428));+#4402 = ORIENTED_EDGE('',*,*,#4403,.T.);+#4403 = EDGE_CURVE('',#4404,#4406,#4408,.T.);+#4404 = VERTEX_POINT('',#4405);+#4405 = CARTESIAN_POINT('',(0.108377220031,-0.780446821916,+ 1.552977284328));+#4406 = VERTEX_POINT('',#4407);+#4407 = CARTESIAN_POINT('',(0.108377220031,-0.780446821916,+ 1.558931852983));+#4408 = LINE('',#4409,#4410);+#4409 = CARTESIAN_POINT('',(0.108377220031,-0.780446821916,+ 1.552977284328));+#4410 = VECTOR('',#4411,1.);+#4411 = DIRECTION('',(0.,0.,1.));+#4412 = ORIENTED_EDGE('',*,*,#4413,.T.);+#4413 = EDGE_CURVE('',#4406,#4414,#4416,.T.);+#4414 = VERTEX_POINT('',#4415);+#4415 = CARTESIAN_POINT('',(-0.108667970454,-0.807195860797,+ 1.558931852983));+#4416 = LINE('',#4417,#4418);+#4417 = CARTESIAN_POINT('',(0.108377220031,-0.780446821916,+ 1.558931852983));+#4418 = VECTOR('',#4419,1.);+#4419 = DIRECTION('',(-0.992491158779,-0.122316391973,0.));+#4420 = ORIENTED_EDGE('',*,*,#4421,.F.);+#4421 = EDGE_CURVE('',#4422,#4414,#4424,.T.);+#4422 = VERTEX_POINT('',#4423);+#4423 = CARTESIAN_POINT('',(-0.108667970454,-0.807195860797,+ 1.552977284328));+#4424 = LINE('',#4425,#4426);+#4425 = CARTESIAN_POINT('',(-0.108667970454,-0.807195860797,+ 1.552977284328));+#4426 = VECTOR('',#4427,1.);+#4427 = DIRECTION('',(0.,0.,1.));+#4428 = ORIENTED_EDGE('',*,*,#4429,.F.);+#4429 = EDGE_CURVE('',#4404,#4422,#4430,.T.);+#4430 = LINE('',#4431,#4432);+#4431 = CARTESIAN_POINT('',(0.108377220031,-0.780446821916,+ 1.552977284328));+#4432 = VECTOR('',#4433,1.);+#4433 = DIRECTION('',(-0.992491158779,-0.122316391973,0.));+#4434 = PLANE('',#4435);+#4435 = AXIS2_PLACEMENT_3D('',#4436,#4437,#4438);+#4436 = CARTESIAN_POINT('',(0.108377220031,-0.780446821916,+ 1.552977284328));+#4437 = DIRECTION('',(0.122316391973,-0.992491158779,0.));+#4438 = DIRECTION('',(-0.992491158779,-0.122316391973,0.));+#4439 = ADVANCED_FACE('',(#4440),#4465,.T.);+#4440 = FACE_BOUND('',#4441,.T.);+#4441 = EDGE_LOOP('',(#4442,#4443,#4451,#4459));+#4442 = ORIENTED_EDGE('',*,*,#4421,.T.);+#4443 = ORIENTED_EDGE('',*,*,#4444,.T.);+#4444 = EDGE_CURVE('',#4414,#4445,#4447,.T.);+#4445 = VERTEX_POINT('',#4446);+#4446 = CARTESIAN_POINT('',(-0.108667970454,-0.769689056279,+ 1.558931852983));+#4447 = LINE('',#4448,#4449);+#4448 = CARTESIAN_POINT('',(-0.108667970454,-0.807195860797,+ 1.558931852983));+#4449 = VECTOR('',#4450,1.);+#4450 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4451 = ORIENTED_EDGE('',*,*,#4452,.F.);+#4452 = EDGE_CURVE('',#4453,#4445,#4455,.T.);+#4453 = VERTEX_POINT('',#4454);+#4454 = CARTESIAN_POINT('',(-0.108667970454,-0.769689056279,+ 1.552977284328));+#4455 = LINE('',#4456,#4457);+#4456 = CARTESIAN_POINT('',(-0.108667970454,-0.769689056279,+ 1.552977284328));+#4457 = VECTOR('',#4458,1.);+#4458 = DIRECTION('',(0.,0.,1.));+#4459 = ORIENTED_EDGE('',*,*,#4460,.F.);+#4460 = EDGE_CURVE('',#4422,#4453,#4461,.T.);+#4461 = LINE('',#4462,#4463);+#4462 = CARTESIAN_POINT('',(-0.108667970454,-0.807195860797,+ 1.552977284328));+#4463 = VECTOR('',#4464,1.);+#4464 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4465 = PLANE('',#4466);+#4466 = AXIS2_PLACEMENT_3D('',#4467,#4468,#4469);+#4467 = CARTESIAN_POINT('',(-0.108667970454,-0.807195860797,+ 1.552977284328));+#4468 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4469 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4470 = ADVANCED_FACE('',(#4471),#4496,.T.);+#4471 = FACE_BOUND('',#4472,.T.);+#4472 = EDGE_LOOP('',(#4473,#4474,#4482,#4490));+#4473 = ORIENTED_EDGE('',*,*,#4452,.T.);+#4474 = ORIENTED_EDGE('',*,*,#4475,.T.);+#4475 = EDGE_CURVE('',#4445,#4476,#4478,.T.);+#4476 = VERTEX_POINT('',#4477);+#4477 = CARTESIAN_POINT('',(5.066326114144E-02,-0.754133908669,+ 1.558931852983));+#4478 = LINE('',#4479,#4480);+#4479 = CARTESIAN_POINT('',(-0.108667970454,-0.769689056279,+ 1.558931852983));+#4480 = VECTOR('',#4481,1.);+#4481 = DIRECTION('',(0.99526821036,9.716578331071E-02,0.));+#4482 = ORIENTED_EDGE('',*,*,#4483,.F.);+#4483 = EDGE_CURVE('',#4484,#4476,#4486,.T.);+#4484 = VERTEX_POINT('',#4485);+#4485 = CARTESIAN_POINT('',(5.066326114144E-02,-0.754133908669,+ 1.552977284328));+#4486 = LINE('',#4487,#4488);+#4487 = CARTESIAN_POINT('',(5.066326114144E-02,-0.754133908669,+ 1.552977284328));+#4488 = VECTOR('',#4489,1.);+#4489 = DIRECTION('',(0.,0.,1.));+#4490 = ORIENTED_EDGE('',*,*,#4491,.F.);+#4491 = EDGE_CURVE('',#4453,#4484,#4492,.T.);+#4492 = LINE('',#4493,#4494);+#4493 = CARTESIAN_POINT('',(-0.108667970454,-0.769689056279,+ 1.552977284328));+#4494 = VECTOR('',#4495,1.);+#4495 = DIRECTION('',(0.99526821036,9.716578331071E-02,0.));+#4496 = PLANE('',#4497);+#4497 = AXIS2_PLACEMENT_3D('',#4498,#4499,#4500);+#4498 = CARTESIAN_POINT('',(-0.108667970454,-0.769689056279,+ 1.552977284328));+#4499 = DIRECTION('',(-9.716578331071E-02,0.99526821036,0.));+#4500 = DIRECTION('',(0.99526821036,9.716578331071E-02,0.));+#4501 = ADVANCED_FACE('',(#4502),#4527,.T.);+#4502 = FACE_BOUND('',#4503,.T.);+#4503 = EDGE_LOOP('',(#4504,#4505,#4513,#4521));+#4504 = ORIENTED_EDGE('',*,*,#4483,.T.);+#4505 = ORIENTED_EDGE('',*,*,#4506,.T.);+#4506 = EDGE_CURVE('',#4476,#4507,#4509,.T.);+#4507 = VERTEX_POINT('',#4508);+#4508 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.73538050641,+ 1.558931852983));+#4509 = LINE('',#4510,#4511);+#4510 = CARTESIAN_POINT('',(5.066326114144E-02,-0.754133908669,+ 1.558931852983));+#4511 = VECTOR('',#4512,1.);+#4512 = DIRECTION('',(-0.983847700035,0.1790075505,0.));+#4513 = ORIENTED_EDGE('',*,*,#4514,.F.);+#4514 = EDGE_CURVE('',#4515,#4507,#4517,.T.);+#4515 = VERTEX_POINT('',#4516);+#4516 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.73538050641,+ 1.552977284328));+#4517 = LINE('',#4518,#4519);+#4518 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.73538050641,+ 1.552977284328));+#4519 = VECTOR('',#4520,1.);+#4520 = DIRECTION('',(0.,0.,1.));+#4521 = ORIENTED_EDGE('',*,*,#4522,.F.);+#4522 = EDGE_CURVE('',#4484,#4515,#4523,.T.);+#4523 = LINE('',#4524,#4525);+#4524 = CARTESIAN_POINT('',(5.066326114144E-02,-0.754133908669,+ 1.552977284328));+#4525 = VECTOR('',#4526,1.);+#4526 = DIRECTION('',(-0.983847700035,0.1790075505,0.));+#4527 = PLANE('',#4528);+#4528 = AXIS2_PLACEMENT_3D('',#4529,#4530,#4531);+#4529 = CARTESIAN_POINT('',(5.066326114144E-02,-0.754133908669,+ 1.552977284328));+#4530 = DIRECTION('',(-0.1790075505,-0.983847700035,0.));+#4531 = DIRECTION('',(-0.983847700035,0.1790075505,0.));+#4532 = ADVANCED_FACE('',(#4533),#4558,.T.);+#4533 = FACE_BOUND('',#4534,.T.);+#4534 = EDGE_LOOP('',(#4535,#4536,#4544,#4552));+#4535 = ORIENTED_EDGE('',*,*,#4514,.T.);+#4536 = ORIENTED_EDGE('',*,*,#4537,.T.);+#4537 = EDGE_CURVE('',#4507,#4538,#4540,.T.);+#4538 = VERTEX_POINT('',#4539);+#4539 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.699763579639,+ 1.558931852983));+#4540 = LINE('',#4541,#4542);+#4541 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.73538050641,+ 1.558931852983));+#4542 = VECTOR('',#4543,1.);+#4543 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4544 = ORIENTED_EDGE('',*,*,#4545,.F.);+#4545 = EDGE_CURVE('',#4546,#4538,#4548,.T.);+#4546 = VERTEX_POINT('',#4547);+#4547 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.699763579639,+ 1.552977284328));+#4548 = LINE('',#4549,#4550);+#4549 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.699763579639,+ 1.552977284328));+#4550 = VECTOR('',#4551,1.);+#4551 = DIRECTION('',(0.,0.,1.));+#4552 = ORIENTED_EDGE('',*,*,#4553,.F.);+#4553 = EDGE_CURVE('',#4515,#4546,#4554,.T.);+#4554 = LINE('',#4555,#4556);+#4555 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.73538050641,+ 1.552977284328));+#4556 = VECTOR('',#4557,1.);+#4557 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4558 = PLANE('',#4559);+#4559 = AXIS2_PLACEMENT_3D('',#4560,#4561,#4562);+#4560 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.73538050641,+ 1.552977284328));+#4561 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4562 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4563 = ADVANCED_FACE('',(#4564),#4589,.T.);+#4564 = FACE_BOUND('',#4565,.T.);+#4565 = EDGE_LOOP('',(#4566,#4567,#4575,#4583));+#4566 = ORIENTED_EDGE('',*,*,#4545,.T.);+#4567 = ORIENTED_EDGE('',*,*,#4568,.T.);+#4568 = EDGE_CURVE('',#4538,#4569,#4571,.T.);+#4569 = VERTEX_POINT('',#4570);+#4570 = CARTESIAN_POINT('',(5.066326114144E-02,-0.677957297943,+ 1.558931852983));+#4571 = LINE('',#4572,#4573);+#4572 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.699763579639,+ 1.558931852983));+#4573 = VECTOR('',#4574,1.);+#4574 = DIRECTION('',(0.978344329753,0.20698399078,0.));+#4575 = ORIENTED_EDGE('',*,*,#4576,.F.);+#4576 = EDGE_CURVE('',#4577,#4569,#4579,.T.);+#4577 = VERTEX_POINT('',#4578);+#4578 = CARTESIAN_POINT('',(5.066326114144E-02,-0.677957297943,+ 1.552977284328));+#4579 = LINE('',#4580,#4581);+#4580 = CARTESIAN_POINT('',(5.066326114144E-02,-0.677957297943,+ 1.552977284328));+#4581 = VECTOR('',#4582,1.);+#4582 = DIRECTION('',(0.,0.,1.));+#4583 = ORIENTED_EDGE('',*,*,#4584,.F.);+#4584 = EDGE_CURVE('',#4546,#4577,#4585,.T.);+#4585 = LINE('',#4586,#4587);+#4586 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.699763579639,+ 1.552977284328));+#4587 = VECTOR('',#4588,1.);+#4588 = DIRECTION('',(0.978344329753,0.20698399078,0.));+#4589 = PLANE('',#4590);+#4590 = AXIS2_PLACEMENT_3D('',#4591,#4592,#4593);+#4591 = CARTESIAN_POINT('',(-5.240776367716E-02,-0.699763579639,+ 1.552977284328));+#4592 = DIRECTION('',(-0.20698399078,0.978344329753,0.));+#4593 = DIRECTION('',(0.978344329753,0.20698399078,0.));+#4594 = ADVANCED_FACE('',(#4595),#4620,.T.);+#4595 = FACE_BOUND('',#4596,.T.);+#4596 = EDGE_LOOP('',(#4597,#4598,#4606,#4614));+#4597 = ORIENTED_EDGE('',*,*,#4576,.T.);+#4598 = ORIENTED_EDGE('',*,*,#4599,.T.);+#4599 = EDGE_CURVE('',#4569,#4600,#4602,.T.);+#4600 = VERTEX_POINT('',#4601);+#4601 = CARTESIAN_POINT('',(-0.108667970454,-0.665745780193,+ 1.558931852983));+#4602 = LINE('',#4603,#4604);+#4603 = CARTESIAN_POINT('',(5.066326114144E-02,-0.677957297943,+ 1.558931852983));+#4604 = VECTOR('',#4605,1.);+#4605 = DIRECTION('',(-0.997075852334,7.641822225914E-02,0.));+#4606 = ORIENTED_EDGE('',*,*,#4607,.F.);+#4607 = EDGE_CURVE('',#4608,#4600,#4610,.T.);+#4608 = VERTEX_POINT('',#4609);+#4609 = CARTESIAN_POINT('',(-0.108667970454,-0.665745780193,+ 1.552977284328));+#4610 = LINE('',#4611,#4612);+#4611 = CARTESIAN_POINT('',(-0.108667970454,-0.665745780193,+ 1.552977284328));+#4612 = VECTOR('',#4613,1.);+#4613 = DIRECTION('',(0.,0.,1.));+#4614 = ORIENTED_EDGE('',*,*,#4615,.F.);+#4615 = EDGE_CURVE('',#4577,#4608,#4616,.T.);+#4616 = LINE('',#4617,#4618);+#4617 = CARTESIAN_POINT('',(5.066326114144E-02,-0.677957297943,+ 1.552977284328));+#4618 = VECTOR('',#4619,1.);+#4619 = DIRECTION('',(-0.997075852334,7.641822225914E-02,0.));+#4620 = PLANE('',#4621);+#4621 = AXIS2_PLACEMENT_3D('',#4622,#4623,#4624);+#4622 = CARTESIAN_POINT('',(5.066326114144E-02,-0.677957297943,+ 1.552977284328));+#4623 = DIRECTION('',(-7.641822225914E-02,-0.997075852334,0.));+#4624 = DIRECTION('',(-0.997075852334,7.641822225914E-02,0.));+#4625 = ADVANCED_FACE('',(#4626),#4651,.T.);+#4626 = FACE_BOUND('',#4627,.T.);+#4627 = EDGE_LOOP('',(#4628,#4629,#4637,#4645));+#4628 = ORIENTED_EDGE('',*,*,#4607,.T.);+#4629 = ORIENTED_EDGE('',*,*,#4630,.T.);+#4630 = EDGE_CURVE('',#4600,#4631,#4633,.T.);+#4631 = VERTEX_POINT('',#4632);+#4632 = CARTESIAN_POINT('',(-0.108667970454,-0.627948225252,+ 1.558931852983));+#4633 = LINE('',#4634,#4635);+#4634 = CARTESIAN_POINT('',(-0.108667970454,-0.665745780193,+ 1.558931852983));+#4635 = VECTOR('',#4636,1.);+#4636 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4637 = ORIENTED_EDGE('',*,*,#4638,.F.);+#4638 = EDGE_CURVE('',#4639,#4631,#4641,.T.);+#4639 = VERTEX_POINT('',#4640);+#4640 = CARTESIAN_POINT('',(-0.108667970454,-0.627948225252,+ 1.552977284328));+#4641 = LINE('',#4642,#4643);+#4642 = CARTESIAN_POINT('',(-0.108667970454,-0.627948225252,+ 1.552977284328));+#4643 = VECTOR('',#4644,1.);+#4644 = DIRECTION('',(0.,0.,1.));+#4645 = ORIENTED_EDGE('',*,*,#4646,.F.);+#4646 = EDGE_CURVE('',#4608,#4639,#4647,.T.);+#4647 = LINE('',#4648,#4649);+#4648 = CARTESIAN_POINT('',(-0.108667970454,-0.665745780193,+ 1.552977284328));+#4649 = VECTOR('',#4650,1.);+#4650 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4651 = PLANE('',#4652);+#4652 = AXIS2_PLACEMENT_3D('',#4653,#4654,#4655);+#4653 = CARTESIAN_POINT('',(-0.108667970454,-0.665745780193,+ 1.552977284328));+#4654 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4655 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4656 = ADVANCED_FACE('',(#4657),#4682,.T.);+#4657 = FACE_BOUND('',#4658,.T.);+#4658 = EDGE_LOOP('',(#4659,#4660,#4668,#4676));+#4659 = ORIENTED_EDGE('',*,*,#4638,.T.);+#4660 = ORIENTED_EDGE('',*,*,#4661,.T.);+#4661 = EDGE_CURVE('',#4631,#4662,#4664,.T.);+#4662 = VERTEX_POINT('',#4663);+#4663 = CARTESIAN_POINT('',(0.108377220031,-0.652952761598,+ 1.558931852983));+#4664 = LINE('',#4665,#4666);+#4665 = CARTESIAN_POINT('',(-0.108667970454,-0.627948225252,+ 1.558931852983));+#4666 = VECTOR('',#4667,1.);+#4667 = DIRECTION('',(0.993429319,-0.114447316054,0.));+#4668 = ORIENTED_EDGE('',*,*,#4669,.F.);+#4669 = EDGE_CURVE('',#4670,#4662,#4672,.T.);+#4670 = VERTEX_POINT('',#4671);+#4671 = CARTESIAN_POINT('',(0.108377220031,-0.652952761598,+ 1.552977284328));+#4672 = LINE('',#4673,#4674);+#4673 = CARTESIAN_POINT('',(0.108377220031,-0.652952761598,+ 1.552977284328));+#4674 = VECTOR('',#4675,1.);+#4675 = DIRECTION('',(0.,0.,1.));+#4676 = ORIENTED_EDGE('',*,*,#4677,.F.);+#4677 = EDGE_CURVE('',#4639,#4670,#4678,.T.);+#4678 = LINE('',#4679,#4680);+#4679 = CARTESIAN_POINT('',(-0.108667970454,-0.627948225252,+ 1.552977284328));+#4680 = VECTOR('',#4681,1.);+#4681 = DIRECTION('',(0.993429319,-0.114447316054,0.));+#4682 = PLANE('',#4683);+#4683 = AXIS2_PLACEMENT_3D('',#4684,#4685,#4686);+#4684 = CARTESIAN_POINT('',(-0.108667970454,-0.627948225252,+ 1.552977284328));+#4685 = DIRECTION('',(0.114447316054,0.993429319,-0.));+#4686 = DIRECTION('',(0.993429319,-0.114447316054,0.));+#4687 = ADVANCED_FACE('',(#4688),#4713,.T.);+#4688 = FACE_BOUND('',#4689,.T.);+#4689 = EDGE_LOOP('',(#4690,#4691,#4699,#4707));+#4690 = ORIENTED_EDGE('',*,*,#4669,.T.);+#4691 = ORIENTED_EDGE('',*,*,#4692,.T.);+#4692 = EDGE_CURVE('',#4662,#4693,#4695,.T.);+#4693 = VERTEX_POINT('',#4694);+#4694 = CARTESIAN_POINT('',(0.108377220031,-0.692930944708,+ 1.558931852983));+#4695 = LINE('',#4696,#4697);+#4696 = CARTESIAN_POINT('',(0.108377220031,-0.652952761598,+ 1.558931852983));+#4697 = VECTOR('',#4698,1.);+#4698 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4699 = ORIENTED_EDGE('',*,*,#4700,.F.);+#4700 = EDGE_CURVE('',#4701,#4693,#4703,.T.);+#4701 = VERTEX_POINT('',#4702);+#4702 = CARTESIAN_POINT('',(0.108377220031,-0.692930944708,+ 1.552977284328));+#4703 = LINE('',#4704,#4705);+#4704 = CARTESIAN_POINT('',(0.108377220031,-0.692930944708,+ 1.552977284328));+#4705 = VECTOR('',#4706,1.);+#4706 = DIRECTION('',(0.,0.,1.));+#4707 = ORIENTED_EDGE('',*,*,#4708,.F.);+#4708 = EDGE_CURVE('',#4670,#4701,#4709,.T.);+#4709 = LINE('',#4710,#4711);+#4710 = CARTESIAN_POINT('',(0.108377220031,-0.652952761598,+ 1.552977284328));+#4711 = VECTOR('',#4712,1.);+#4712 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4713 = PLANE('',#4714);+#4714 = AXIS2_PLACEMENT_3D('',#4715,#4716,#4717);+#4715 = CARTESIAN_POINT('',(0.108377220031,-0.652952761598,+ 1.552977284328));+#4716 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4717 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4718 = ADVANCED_FACE('',(#4719),#4744,.T.);+#4719 = FACE_BOUND('',#4720,.T.);+#4720 = EDGE_LOOP('',(#4721,#4722,#4730,#4738));+#4721 = ORIENTED_EDGE('',*,*,#4700,.T.);+#4722 = ORIENTED_EDGE('',*,*,#4723,.T.);+#4723 = EDGE_CURVE('',#4693,#4724,#4726,.T.);+#4724 = VERTEX_POINT('',#4725);+#4725 = CARTESIAN_POINT('',(-5.596945635425E-03,-0.71764473063,+ 1.558931852983));+#4726 = LINE('',#4727,#4728);+#4727 = CARTESIAN_POINT('',(0.108377220031,-0.692930944708,+ 1.558931852983));+#4728 = VECTOR('',#4729,1.);+#4729 = DIRECTION('',(-0.977288730651,-0.211912097207,0.));+#4730 = ORIENTED_EDGE('',*,*,#4731,.F.);+#4731 = EDGE_CURVE('',#4732,#4724,#4734,.T.);+#4732 = VERTEX_POINT('',#4733);+#4733 = CARTESIAN_POINT('',(-5.596945635425E-03,-0.71764473063,+ 1.552977284328));+#4734 = LINE('',#4735,#4736);+#4735 = CARTESIAN_POINT('',(-5.596945635425E-03,-0.71764473063,+ 1.552977284328));+#4736 = VECTOR('',#4737,1.);+#4737 = DIRECTION('',(0.,0.,1.));+#4738 = ORIENTED_EDGE('',*,*,#4739,.F.);+#4739 = EDGE_CURVE('',#4701,#4732,#4740,.T.);+#4740 = LINE('',#4741,#4742);+#4741 = CARTESIAN_POINT('',(0.108377220031,-0.692930944708,+ 1.552977284328));+#4742 = VECTOR('',#4743,1.);+#4743 = DIRECTION('',(-0.977288730651,-0.211912097207,0.));+#4744 = PLANE('',#4745);+#4745 = AXIS2_PLACEMENT_3D('',#4746,#4747,#4748);+#4746 = CARTESIAN_POINT('',(0.108377220031,-0.692930944708,+ 1.552977284328));+#4747 = DIRECTION('',(0.211912097207,-0.977288730651,0.));+#4748 = DIRECTION('',(-0.977288730651,-0.211912097207,0.));+#4749 = ADVANCED_FACE('',(#4750),#4775,.T.);+#4750 = FACE_BOUND('',#4751,.T.);+#4751 = EDGE_LOOP('',(#4752,#4753,#4761,#4769));+#4752 = ORIENTED_EDGE('',*,*,#4731,.T.);+#4753 = ORIENTED_EDGE('',*,*,#4754,.T.);+#4754 = EDGE_CURVE('',#4724,#4755,#4757,.T.);+#4755 = VERTEX_POINT('',#4756);+#4756 = CARTESIAN_POINT('',(0.108377220031,-0.740759389229,+ 1.558931852983));+#4757 = LINE('',#4758,#4759);+#4758 = CARTESIAN_POINT('',(-5.596945635425E-03,-0.71764473063,+ 1.558931852983));+#4759 = VECTOR('',#4760,1.);+#4760 = DIRECTION('',(0.980048237936,-0.198759782949,0.));+#4761 = ORIENTED_EDGE('',*,*,#4762,.F.);+#4762 = EDGE_CURVE('',#4763,#4755,#4765,.T.);+#4763 = VERTEX_POINT('',#4764);+#4764 = CARTESIAN_POINT('',(0.108377220031,-0.740759389229,+ 1.552977284328));+#4765 = LINE('',#4766,#4767);+#4766 = CARTESIAN_POINT('',(0.108377220031,-0.740759389229,+ 1.552977284328));+#4767 = VECTOR('',#4768,1.);+#4768 = DIRECTION('',(0.,0.,1.));+#4769 = ORIENTED_EDGE('',*,*,#4770,.F.);+#4770 = EDGE_CURVE('',#4732,#4763,#4771,.T.);+#4771 = LINE('',#4772,#4773);+#4772 = CARTESIAN_POINT('',(-5.596945635425E-03,-0.71764473063,+ 1.552977284328));+#4773 = VECTOR('',#4774,1.);+#4774 = DIRECTION('',(0.980048237936,-0.198759782949,0.));+#4775 = PLANE('',#4776);+#4776 = AXIS2_PLACEMENT_3D('',#4777,#4778,#4779);+#4777 = CARTESIAN_POINT('',(-5.596945635425E-03,-0.71764473063,+ 1.552977284328));+#4778 = DIRECTION('',(0.198759782949,0.980048237936,-0.));+#4779 = DIRECTION('',(0.980048237936,-0.198759782949,0.));+#4780 = ADVANCED_FACE('',(#4781),#4797,.T.);+#4781 = FACE_BOUND('',#4782,.T.);+#4782 = EDGE_LOOP('',(#4783,#4784,#4790,#4791));+#4783 = ORIENTED_EDGE('',*,*,#4762,.T.);+#4784 = ORIENTED_EDGE('',*,*,#4785,.T.);+#4785 = EDGE_CURVE('',#4755,#4406,#4786,.T.);+#4786 = LINE('',#4787,#4788);+#4787 = CARTESIAN_POINT('',(0.108377220031,-0.740759389229,+ 1.558931852983));+#4788 = VECTOR('',#4789,1.);+#4789 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4790 = ORIENTED_EDGE('',*,*,#4403,.F.);+#4791 = ORIENTED_EDGE('',*,*,#4792,.F.);+#4792 = EDGE_CURVE('',#4763,#4404,#4793,.T.);+#4793 = LINE('',#4794,#4795);+#4794 = CARTESIAN_POINT('',(0.108377220031,-0.740759389229,+ 1.552977284328));+#4795 = VECTOR('',#4796,1.);+#4796 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4797 = PLANE('',#4798);+#4798 = AXIS2_PLACEMENT_3D('',#4799,#4800,#4801);+#4799 = CARTESIAN_POINT('',(0.108377220031,-0.740759389229,+ 1.552977284328));+#4800 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4801 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4802 = ADVANCED_FACE('',(#4803),#4818,.F.);+#4803 = FACE_BOUND('',#4804,.T.);+#4804 = EDGE_LOOP('',(#4805,#4806,#4807,#4808,#4809,#4810,#4811,#4812,+ #4813,#4814,#4815,#4816,#4817));+#4805 = ORIENTED_EDGE('',*,*,#4429,.T.);+#4806 = ORIENTED_EDGE('',*,*,#4460,.T.);+#4807 = ORIENTED_EDGE('',*,*,#4491,.T.);+#4808 = ORIENTED_EDGE('',*,*,#4522,.T.);+#4809 = ORIENTED_EDGE('',*,*,#4553,.T.);+#4810 = ORIENTED_EDGE('',*,*,#4584,.T.);+#4811 = ORIENTED_EDGE('',*,*,#4615,.T.);+#4812 = ORIENTED_EDGE('',*,*,#4646,.T.);+#4813 = ORIENTED_EDGE('',*,*,#4677,.T.);+#4814 = ORIENTED_EDGE('',*,*,#4708,.T.);+#4815 = ORIENTED_EDGE('',*,*,#4739,.T.);+#4816 = ORIENTED_EDGE('',*,*,#4770,.T.);+#4817 = ORIENTED_EDGE('',*,*,#4792,.T.);+#4818 = PLANE('',#4819);+#4819 = AXIS2_PLACEMENT_3D('',#4820,#4821,#4822);+#4820 = CARTESIAN_POINT('',(0.108377220031,-0.807195860797,+ 1.552977284328));+#4821 = DIRECTION('',(0.,0.,1.));+#4822 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4823 = ADVANCED_FACE('',(#4824),#4839,.T.);+#4824 = FACE_BOUND('',#4825,.F.);+#4825 = EDGE_LOOP('',(#4826,#4827,#4828,#4829,#4830,#4831,#4832,#4833,+ #4834,#4835,#4836,#4837,#4838));+#4826 = ORIENTED_EDGE('',*,*,#4413,.T.);+#4827 = ORIENTED_EDGE('',*,*,#4444,.T.);+#4828 = ORIENTED_EDGE('',*,*,#4475,.T.);+#4829 = ORIENTED_EDGE('',*,*,#4506,.T.);+#4830 = ORIENTED_EDGE('',*,*,#4537,.T.);+#4831 = ORIENTED_EDGE('',*,*,#4568,.T.);+#4832 = ORIENTED_EDGE('',*,*,#4599,.T.);+#4833 = ORIENTED_EDGE('',*,*,#4630,.T.);+#4834 = ORIENTED_EDGE('',*,*,#4661,.T.);+#4835 = ORIENTED_EDGE('',*,*,#4692,.T.);+#4836 = ORIENTED_EDGE('',*,*,#4723,.T.);+#4837 = ORIENTED_EDGE('',*,*,#4754,.T.);+#4838 = ORIENTED_EDGE('',*,*,#4785,.T.);+#4839 = PLANE('',#4840);+#4840 = AXIS2_PLACEMENT_3D('',#4841,#4842,#4843);+#4841 = CARTESIAN_POINT('',(0.108377220031,-0.807195860797,+ 1.558931852983));+#4842 = DIRECTION('',(0.,0.,1.));+#4843 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4844 = MANIFOLD_SOLID_BREP('',#4845);+#4845 = CLOSED_SHELL('',(#4846,#4886,#4917,#4950,#4983,#5016,#5049,#5071+ ,#5111,#5142,#5173,#5206,#5239,#5272,#5296,#5320));+#4846 = ADVANCED_FACE('',(#4847),#4881,.T.);+#4847 = FACE_BOUND('',#4848,.T.);+#4848 = EDGE_LOOP('',(#4849,#4859,#4867,#4875));+#4849 = ORIENTED_EDGE('',*,*,#4850,.T.);+#4850 = EDGE_CURVE('',#4851,#4853,#4855,.T.);+#4851 = VERTEX_POINT('',#4852);+#4852 = CARTESIAN_POINT('',(0.108377220031,-0.608031821303,+ 1.552977284328));+#4853 = VERTEX_POINT('',#4854);+#4854 = CARTESIAN_POINT('',(0.108377220031,-0.608031821303,+ 1.558931852983));+#4855 = LINE('',#4856,#4857);+#4856 = CARTESIAN_POINT('',(0.108377220031,-0.608031821303,+ 1.552977284328));+#4857 = VECTOR('',#4858,1.);+#4858 = DIRECTION('',(0.,0.,1.));+#4859 = ORIENTED_EDGE('',*,*,#4860,.T.);+#4860 = EDGE_CURVE('',#4853,#4861,#4863,.T.);+#4861 = VERTEX_POINT('',#4862);+#4862 = CARTESIAN_POINT('',(-0.108667970454,-0.608031821303,+ 1.558931852983));+#4863 = LINE('',#4864,#4865);+#4864 = CARTESIAN_POINT('',(0.108377220031,-0.608031821303,+ 1.558931852983));+#4865 = VECTOR('',#4866,1.);+#4866 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4867 = ORIENTED_EDGE('',*,*,#4868,.F.);+#4868 = EDGE_CURVE('',#4869,#4861,#4871,.T.);+#4869 = VERTEX_POINT('',#4870);+#4870 = CARTESIAN_POINT('',(-0.108667970454,-0.608031821303,+ 1.552977284328));+#4871 = LINE('',#4872,#4873);+#4872 = CARTESIAN_POINT('',(-0.108667970454,-0.608031821303,+ 1.552977284328));+#4873 = VECTOR('',#4874,1.);+#4874 = DIRECTION('',(0.,0.,1.));+#4875 = ORIENTED_EDGE('',*,*,#4876,.F.);+#4876 = EDGE_CURVE('',#4851,#4869,#4877,.T.);+#4877 = LINE('',#4878,#4879);+#4878 = CARTESIAN_POINT('',(0.108377220031,-0.608031821303,+ 1.552977284328));+#4879 = VECTOR('',#4880,1.);+#4880 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4881 = PLANE('',#4882);+#4882 = AXIS2_PLACEMENT_3D('',#4883,#4884,#4885);+#4883 = CARTESIAN_POINT('',(0.108377220031,-0.608031821303,+ 1.552977284328));+#4884 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4885 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4886 = ADVANCED_FACE('',(#4887),#4912,.T.);+#4887 = FACE_BOUND('',#4888,.T.);+#4888 = EDGE_LOOP('',(#4889,#4890,#4898,#4906));+#4889 = ORIENTED_EDGE('',*,*,#4868,.T.);+#4890 = ORIENTED_EDGE('',*,*,#4891,.T.);+#4891 = EDGE_CURVE('',#4861,#4892,#4894,.T.);+#4892 = VERTEX_POINT('',#4893);+#4893 = CARTESIAN_POINT('',(-0.108667970454,-0.562093254529,+ 1.558931852983));+#4894 = LINE('',#4895,#4896);+#4895 = CARTESIAN_POINT('',(-0.108667970454,-0.608031821303,+ 1.558931852983));+#4896 = VECTOR('',#4897,1.);+#4897 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4898 = ORIENTED_EDGE('',*,*,#4899,.F.);+#4899 = EDGE_CURVE('',#4900,#4892,#4902,.T.);+#4900 = VERTEX_POINT('',#4901);+#4901 = CARTESIAN_POINT('',(-0.108667970454,-0.562093254529,+ 1.552977284328));+#4902 = LINE('',#4903,#4904);+#4903 = CARTESIAN_POINT('',(-0.108667970454,-0.562093254529,+ 1.552977284328));+#4904 = VECTOR('',#4905,1.);+#4905 = DIRECTION('',(0.,0.,1.));+#4906 = ORIENTED_EDGE('',*,*,#4907,.F.);+#4907 = EDGE_CURVE('',#4869,#4900,#4908,.T.);+#4908 = LINE('',#4909,#4910);+#4909 = CARTESIAN_POINT('',(-0.108667970454,-0.608031821303,+ 1.552977284328));+#4910 = VECTOR('',#4911,1.);+#4911 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4912 = PLANE('',#4913);+#4913 = AXIS2_PLACEMENT_3D('',#4914,#4915,#4916);+#4914 = CARTESIAN_POINT('',(-0.108667970454,-0.608031821303,+ 1.552977284328));+#4915 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4916 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4917 = ADVANCED_FACE('',(#4918),#4943,.T.);+#4918 = FACE_BOUND('',#4919,.T.);+#4919 = EDGE_LOOP('',(#4920,#4921,#4929,#4937));+#4920 = ORIENTED_EDGE('',*,*,#4899,.T.);+#4921 = ORIENTED_EDGE('',*,*,#4922,.T.);+#4922 = EDGE_CURVE('',#4892,#4923,#4925,.T.);+#4923 = VERTEX_POINT('',#4924);+#4924 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.558931852983));+#4925 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4926,#4927,#4928),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4926 = CARTESIAN_POINT('',(-0.108667970454,-0.562093254529,+ 1.558931852983));+#4927 = CARTESIAN_POINT('',(-0.108667970454,-0.50888592719,+ 1.558931852983));+#4928 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.558931852983));+#4929 = ORIENTED_EDGE('',*,*,#4930,.F.);+#4930 = EDGE_CURVE('',#4931,#4923,#4933,.T.);+#4931 = VERTEX_POINT('',#4932);+#4932 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.552977284328));+#4933 = LINE('',#4934,#4935);+#4934 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.552977284328));+#4935 = VECTOR('',#4936,1.);+#4936 = DIRECTION('',(0.,0.,1.));+#4937 = ORIENTED_EDGE('',*,*,#4938,.F.);+#4938 = EDGE_CURVE('',#4900,#4931,#4939,.T.);+#4939 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4940,#4941,#4942),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4940 = CARTESIAN_POINT('',(-0.108667970454,-0.562093254529,+ 1.552977284328));+#4941 = CARTESIAN_POINT('',(-0.108667970454,-0.50888592719,+ 1.552977284328));+#4942 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.552977284328));+#4943 = SURFACE_OF_LINEAR_EXTRUSION('',#4944,#4948);+#4944 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4945,#4946,#4947),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4945 = CARTESIAN_POINT('',(-0.108667970454,-0.562093254529,+ 1.552977284328));+#4946 = CARTESIAN_POINT('',(-0.108667970454,-0.50888592719,+ 1.552977284328));+#4947 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.552977284328));+#4948 = VECTOR('',#4949,1.);+#4949 = DIRECTION('',(-0.,-0.,-1.));+#4950 = ADVANCED_FACE('',(#4951),#4976,.T.);+#4951 = FACE_BOUND('',#4952,.T.);+#4952 = EDGE_LOOP('',(#4953,#4954,#4962,#4970));+#4953 = ORIENTED_EDGE('',*,*,#4930,.T.);+#4954 = ORIENTED_EDGE('',*,*,#4955,.T.);+#4955 = EDGE_CURVE('',#4923,#4956,#4958,.T.);+#4956 = VERTEX_POINT('',#4957);+#4957 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.558931852983));+#4958 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4959,#4960,#4961),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4959 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.558931852983));+#4960 = CARTESIAN_POINT('',(-5.793202170693E-02,-0.462075109148,+ 1.558931852983));+#4961 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.558931852983));+#4962 = ORIENTED_EDGE('',*,*,#4963,.F.);+#4963 = EDGE_CURVE('',#4964,#4956,#4966,.T.);+#4964 = VERTEX_POINT('',#4965);+#4965 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.552977284328));+#4966 = LINE('',#4967,#4968);+#4967 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.552977284328));+#4968 = VECTOR('',#4969,1.);+#4969 = DIRECTION('',(0.,0.,1.));+#4970 = ORIENTED_EDGE('',*,*,#4971,.F.);+#4971 = EDGE_CURVE('',#4931,#4964,#4972,.T.);+#4972 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4973,#4974,#4975),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4973 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.552977284328));+#4974 = CARTESIAN_POINT('',(-5.793202170693E-02,-0.462075109148,+ 1.552977284328));+#4975 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.552977284328));+#4976 = SURFACE_OF_LINEAR_EXTRUSION('',#4977,#4981);+#4977 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4978,#4979,#4980),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4978 = CARTESIAN_POINT('',(-8.329999608048E-02,-0.485480518169,+ 1.552977284328));+#4979 = CARTESIAN_POINT('',(-5.793202170693E-02,-0.462075109148,+ 1.552977284328));+#4980 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.552977284328));+#4981 = VECTOR('',#4982,1.);+#4982 = DIRECTION('',(-0.,-0.,-1.));+#4983 = ADVANCED_FACE('',(#4984),#5009,.T.);+#4984 = FACE_BOUND('',#4985,.T.);+#4985 = EDGE_LOOP('',(#4986,#4987,#4995,#5003));+#4986 = ORIENTED_EDGE('',*,*,#4963,.T.);+#4987 = ORIENTED_EDGE('',*,*,#4988,.T.);+#4988 = EDGE_CURVE('',#4956,#4989,#4991,.T.);+#4989 = VERTEX_POINT('',#4990);+#4990 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.558931852983));+#4991 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4992,#4993,#4994),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4992 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.558931852983));+#4993 = CARTESIAN_POINT('',(5.735052086169E-02,-0.462075109148,+ 1.558931852983));+#4994 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.558931852983));+#4995 = ORIENTED_EDGE('',*,*,#4996,.F.);+#4996 = EDGE_CURVE('',#4997,#4989,#4999,.T.);+#4997 = VERTEX_POINT('',#4998);+#4998 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.552977284328));+#4999 = LINE('',#5000,#5001);+#5000 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.552977284328));+#5001 = VECTOR('',#5002,1.);+#5002 = DIRECTION('',(0.,0.,1.));+#5003 = ORIENTED_EDGE('',*,*,#5004,.F.);+#5004 = EDGE_CURVE('',#4964,#4997,#5005,.T.);+#5005 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5006,#5007,#5008),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5006 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.552977284328));+#5007 = CARTESIAN_POINT('',(5.735052086169E-02,-0.462075109148,+ 1.552977284328));+#5008 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.552977284328));+#5009 = SURFACE_OF_LINEAR_EXTRUSION('',#5010,#5014);+#5010 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5011,#5012,#5013),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5011 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.462075109148,+ 1.552977284328));+#5012 = CARTESIAN_POINT('',(5.735052086169E-02,-0.462075109148,+ 1.552977284328));+#5013 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.552977284328));+#5014 = VECTOR('',#5015,1.);+#5015 = DIRECTION('',(-0.,-0.,-1.));+#5016 = ADVANCED_FACE('',(#5017),#5042,.T.);+#5017 = FACE_BOUND('',#5018,.T.);+#5018 = EDGE_LOOP('',(#5019,#5020,#5028,#5036));+#5019 = ORIENTED_EDGE('',*,*,#4996,.T.);+#5020 = ORIENTED_EDGE('',*,*,#5021,.T.);+#5021 = EDGE_CURVE('',#4989,#5022,#5024,.T.);+#5022 = VERTEX_POINT('',#5023);+#5023 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.558931852983));+#5024 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5025,#5026,#5027),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5025 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.558931852983));+#5026 = CARTESIAN_POINT('',(0.108377220031,-0.50888592719,1.558931852983+ ));+#5027 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.558931852983));+#5028 = ORIENTED_EDGE('',*,*,#5029,.F.);+#5029 = EDGE_CURVE('',#5030,#5022,#5032,.T.);+#5030 = VERTEX_POINT('',#5031);+#5031 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.552977284328));+#5032 = LINE('',#5033,#5034);+#5033 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.552977284328));+#5034 = VECTOR('',#5035,1.);+#5035 = DIRECTION('',(0.,0.,1.));+#5036 = ORIENTED_EDGE('',*,*,#5037,.F.);+#5037 = EDGE_CURVE('',#4997,#5030,#5038,.T.);+#5038 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5039,#5040,#5041),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5039 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.552977284328));+#5040 = CARTESIAN_POINT('',(0.108377220031,-0.50888592719,1.552977284328+ ));+#5041 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.552977284328));+#5042 = SURFACE_OF_LINEAR_EXTRUSION('',#5043,#5047);+#5043 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5044,#5045,#5046),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5044 = CARTESIAN_POINT('',(8.286387044655E-02,-0.485480518169,+ 1.552977284328));+#5045 = CARTESIAN_POINT('',(0.108377220031,-0.50888592719,1.552977284328+ ));+#5046 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.552977284328));+#5047 = VECTOR('',#5048,1.);+#5048 = DIRECTION('',(-0.,-0.,-1.));+#5049 = ADVANCED_FACE('',(#5050),#5066,.T.);+#5050 = FACE_BOUND('',#5051,.T.);+#5051 = EDGE_LOOP('',(#5052,#5053,#5059,#5060));+#5052 = ORIENTED_EDGE('',*,*,#5029,.T.);+#5053 = ORIENTED_EDGE('',*,*,#5054,.T.);+#5054 = EDGE_CURVE('',#5022,#4853,#5055,.T.);+#5055 = LINE('',#5056,#5057);+#5056 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.558931852983));+#5057 = VECTOR('',#5058,1.);+#5058 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5059 = ORIENTED_EDGE('',*,*,#4850,.F.);+#5060 = ORIENTED_EDGE('',*,*,#5061,.F.);+#5061 = EDGE_CURVE('',#5030,#4851,#5062,.T.);+#5062 = LINE('',#5063,#5064);+#5063 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.552977284328));+#5064 = VECTOR('',#5065,1.);+#5065 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5066 = PLANE('',#5067);+#5067 = AXIS2_PLACEMENT_3D('',#5068,#5069,#5070);+#5068 = CARTESIAN_POINT('',(0.108377220031,-0.562093254529,+ 1.552977284328));+#5069 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5070 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5071 = ADVANCED_FACE('',(#5072),#5106,.T.);+#5072 = FACE_BOUND('',#5073,.T.);+#5073 = EDGE_LOOP('',(#5074,#5084,#5092,#5100));+#5074 = ORIENTED_EDGE('',*,*,#5075,.T.);+#5075 = EDGE_CURVE('',#5076,#5078,#5080,.T.);+#5076 = VERTEX_POINT('',#5077);+#5077 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.552977284328));+#5078 = VERTEX_POINT('',#5079);+#5079 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.558931852983));+#5080 = LINE('',#5081,#5082);+#5081 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.552977284328));+#5082 = VECTOR('',#5083,1.);+#5083 = DIRECTION('',(0.,0.,1.));+#5084 = ORIENTED_EDGE('',*,*,#5085,.T.);+#5085 = EDGE_CURVE('',#5078,#5086,#5088,.T.);+#5086 = VERTEX_POINT('',#5087);+#5087 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.565146133967,+ 1.558931852983));+#5088 = LINE('',#5089,#5090);+#5089 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.558931852983));+#5090 = VECTOR('',#5091,1.);+#5091 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5092 = ORIENTED_EDGE('',*,*,#5093,.F.);+#5093 = EDGE_CURVE('',#5094,#5086,#5096,.T.);+#5094 = VERTEX_POINT('',#5095);+#5095 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.565146133967,+ 1.552977284328));+#5096 = LINE('',#5097,#5098);+#5097 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.565146133967,+ 1.552977284328));+#5098 = VECTOR('',#5099,1.);+#5099 = DIRECTION('',(0.,0.,1.));+#5100 = ORIENTED_EDGE('',*,*,#5101,.F.);+#5101 = EDGE_CURVE('',#5076,#5094,#5102,.T.);+#5102 = LINE('',#5103,#5104);+#5103 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.552977284328));+#5104 = VECTOR('',#5105,1.);+#5105 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5106 = PLANE('',#5107);+#5107 = AXIS2_PLACEMENT_3D('',#5108,#5109,#5110);+#5108 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.552977284328));+#5109 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5110 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5111 = ADVANCED_FACE('',(#5112),#5137,.T.);+#5112 = FACE_BOUND('',#5113,.T.);+#5113 = EDGE_LOOP('',(#5114,#5115,#5123,#5131));+#5114 = ORIENTED_EDGE('',*,*,#5093,.T.);+#5115 = ORIENTED_EDGE('',*,*,#5116,.T.);+#5116 = EDGE_CURVE('',#5086,#5117,#5119,.T.);+#5117 = VERTEX_POINT('',#5118);+#5118 = CARTESIAN_POINT('',(6.970741382302E-02,-0.565146133967,+ 1.558931852983));+#5119 = LINE('',#5120,#5121);+#5120 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.565146133967,+ 1.558931852983));+#5121 = VECTOR('',#5122,1.);+#5122 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5123 = ORIENTED_EDGE('',*,*,#5124,.F.);+#5124 = EDGE_CURVE('',#5125,#5117,#5127,.T.);+#5125 = VERTEX_POINT('',#5126);+#5126 = CARTESIAN_POINT('',(6.970741382302E-02,-0.565146133967,+ 1.552977284328));+#5127 = LINE('',#5128,#5129);+#5128 = CARTESIAN_POINT('',(6.970741382302E-02,-0.565146133967,+ 1.552977284328));+#5129 = VECTOR('',#5130,1.);+#5130 = DIRECTION('',(0.,0.,1.));+#5131 = ORIENTED_EDGE('',*,*,#5132,.F.);+#5132 = EDGE_CURVE('',#5094,#5125,#5133,.T.);+#5133 = LINE('',#5134,#5135);+#5134 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.565146133967,+ 1.552977284328));+#5135 = VECTOR('',#5136,1.);+#5136 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5137 = PLANE('',#5138);+#5138 = AXIS2_PLACEMENT_3D('',#5139,#5140,#5141);+#5139 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.565146133967,+ 1.552977284328));+#5140 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#5141 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5142 = ADVANCED_FACE('',(#5143),#5168,.T.);+#5143 = FACE_BOUND('',#5144,.T.);+#5144 = EDGE_LOOP('',(#5145,#5146,#5154,#5162));+#5145 = ORIENTED_EDGE('',*,*,#5124,.T.);+#5146 = ORIENTED_EDGE('',*,*,#5147,.T.);+#5147 = EDGE_CURVE('',#5117,#5148,#5150,.T.);+#5148 = VERTEX_POINT('',#5149);+#5149 = CARTESIAN_POINT('',(6.970741382302E-02,-0.553516117062,+ 1.558931852983));+#5150 = LINE('',#5151,#5152);+#5151 = CARTESIAN_POINT('',(6.970741382302E-02,-0.565146133967,+ 1.558931852983));+#5152 = VECTOR('',#5153,1.);+#5153 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5154 = ORIENTED_EDGE('',*,*,#5155,.F.);+#5155 = EDGE_CURVE('',#5156,#5148,#5158,.T.);+#5156 = VERTEX_POINT('',#5157);+#5157 = CARTESIAN_POINT('',(6.970741382302E-02,-0.553516117062,+ 1.552977284328));+#5158 = LINE('',#5159,#5160);+#5159 = CARTESIAN_POINT('',(6.970741382302E-02,-0.553516117062,+ 1.552977284328));+#5160 = VECTOR('',#5161,1.);+#5161 = DIRECTION('',(0.,0.,1.));+#5162 = ORIENTED_EDGE('',*,*,#5163,.F.);+#5163 = EDGE_CURVE('',#5125,#5156,#5164,.T.);+#5164 = LINE('',#5165,#5166);+#5165 = CARTESIAN_POINT('',(6.970741382302E-02,-0.565146133967,+ 1.552977284328));+#5166 = VECTOR('',#5167,1.);+#5167 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5168 = PLANE('',#5169);+#5169 = AXIS2_PLACEMENT_3D('',#5170,#5171,#5172);+#5170 = CARTESIAN_POINT('',(6.970741382302E-02,-0.565146133967,+ 1.552977284328));+#5171 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5172 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5173 = ADVANCED_FACE('',(#5174),#5199,.T.);+#5174 = FACE_BOUND('',#5175,.T.);+#5175 = EDGE_LOOP('',(#5176,#5177,#5185,#5193));+#5176 = ORIENTED_EDGE('',*,*,#5155,.T.);+#5177 = ORIENTED_EDGE('',*,*,#5178,.T.);+#5178 = EDGE_CURVE('',#5148,#5179,#5181,.T.);+#5179 = VERTEX_POINT('',#5180);+#5180 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.558931852983));+#5181 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5182,#5183,#5184),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5182 = CARTESIAN_POINT('',(6.970741382302E-02,-0.553516117062,+ 1.558931852983));+#5183 = CARTESIAN_POINT('',(6.970741382302E-02,-0.528220830294,+ 1.558931852983));+#5184 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.558931852983));+#5185 = ORIENTED_EDGE('',*,*,#5186,.F.);+#5186 = EDGE_CURVE('',#5187,#5179,#5189,.T.);+#5187 = VERTEX_POINT('',#5188);+#5188 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.552977284328));+#5189 = LINE('',#5190,#5191);+#5190 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.552977284328));+#5191 = VECTOR('',#5192,1.);+#5192 = DIRECTION('',(0.,0.,1.));+#5193 = ORIENTED_EDGE('',*,*,#5194,.F.);+#5194 = EDGE_CURVE('',#5156,#5187,#5195,.T.);+#5195 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5196,#5197,#5198),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5196 = CARTESIAN_POINT('',(6.970741382302E-02,-0.553516117062,+ 1.552977284328));+#5197 = CARTESIAN_POINT('',(6.970741382302E-02,-0.528220830294,+ 1.552977284328));+#5198 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.552977284328));+#5199 = SURFACE_OF_LINEAR_EXTRUSION('',#5200,#5204);+#5200 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5201,#5202,#5203),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5201 = CARTESIAN_POINT('',(6.970741382302E-02,-0.553516117062,+ 1.552977284328));+#5202 = CARTESIAN_POINT('',(6.970741382302E-02,-0.528220830294,+ 1.552977284328));+#5203 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.552977284328));+#5204 = VECTOR('',#5205,1.);+#5205 = DIRECTION('',(-0.,-0.,-1.));+#5206 = ADVANCED_FACE('',(#5207),#5232,.T.);+#5207 = FACE_BOUND('',#5208,.T.);+#5208 = EDGE_LOOP('',(#5209,#5210,#5218,#5226));+#5209 = ORIENTED_EDGE('',*,*,#5186,.T.);+#5210 = ORIENTED_EDGE('',*,*,#5211,.T.);+#5211 = EDGE_CURVE('',#5179,#5212,#5214,.T.);+#5212 = VERTEX_POINT('',#5213);+#5213 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.558931852983));+#5214 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5215,#5216,#5217),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5215 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.558931852983));+#5216 = CARTESIAN_POINT('',(3.787024254619E-02,-0.50670529902,+ 1.558931852983));+#5217 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.558931852983));+#5218 = ORIENTED_EDGE('',*,*,#5219,.F.);+#5219 = EDGE_CURVE('',#5220,#5212,#5222,.T.);+#5220 = VERTEX_POINT('',#5221);+#5221 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.552977284328));+#5222 = LINE('',#5223,#5224);+#5223 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.552977284328));+#5224 = VECTOR('',#5225,1.);+#5225 = DIRECTION('',(0.,0.,1.));+#5226 = ORIENTED_EDGE('',*,*,#5227,.F.);+#5227 = EDGE_CURVE('',#5187,#5220,#5228,.T.);+#5228 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5229,#5230,#5231),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5229 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.552977284328));+#5230 = CARTESIAN_POINT('',(3.787024254619E-02,-0.50670529902,+ 1.552977284328));+#5231 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.552977284328));+#5232 = SURFACE_OF_LINEAR_EXTRUSION('',#5233,#5237);+#5233 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5234,#5235,#5236),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5234 = CARTESIAN_POINT('',(5.37888281846E-02,-0.517463064657,+ 1.552977284328));+#5235 = CARTESIAN_POINT('',(3.787024254619E-02,-0.50670529902,+ 1.552977284328));+#5236 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.552977284328));+#5237 = VECTOR('',#5238,1.);+#5238 = DIRECTION('',(-0.,-0.,-1.));+#5239 = ADVANCED_FACE('',(#5240),#5265,.T.);+#5240 = FACE_BOUND('',#5241,.T.);+#5241 = EDGE_LOOP('',(#5242,#5243,#5251,#5259));+#5242 = ORIENTED_EDGE('',*,*,#5219,.T.);+#5243 = ORIENTED_EDGE('',*,*,#5244,.T.);+#5244 = EDGE_CURVE('',#5212,#5245,#5247,.T.);+#5245 = VERTEX_POINT('',#5246);+#5246 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.558931852983));+#5247 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5248,#5249,#5250),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5248 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.558931852983));+#5249 = CARTESIAN_POINT('',(-3.830636818011E-02,-0.50670529902,+ 1.558931852983));+#5250 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.558931852983));+#5251 = ORIENTED_EDGE('',*,*,#5252,.F.);+#5252 = EDGE_CURVE('',#5253,#5245,#5255,.T.);+#5253 = VERTEX_POINT('',#5254);+#5254 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.552977284328));+#5255 = LINE('',#5256,#5257);+#5256 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.552977284328));+#5257 = VECTOR('',#5258,1.);+#5258 = DIRECTION('',(0.,0.,1.));+#5259 = ORIENTED_EDGE('',*,*,#5260,.F.);+#5260 = EDGE_CURVE('',#5220,#5253,#5261,.T.);+#5261 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5262,#5263,#5264),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5262 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.552977284328));+#5263 = CARTESIAN_POINT('',(-3.830636818011E-02,-0.50670529902,+ 1.552977284328));+#5264 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.552977284328));+#5265 = SURFACE_OF_LINEAR_EXTRUSION('',#5266,#5270);+#5266 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5267,#5268,#5269),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5267 = CARTESIAN_POINT('',(-3.634380282744E-04,-0.50670529902,+ 1.552977284328));+#5268 = CARTESIAN_POINT('',(-3.830636818011E-02,-0.50670529902,+ 1.552977284328));+#5269 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.552977284328));+#5270 = VECTOR('',#5271,1.);+#5271 = DIRECTION('',(-0.,-0.,-1.));+#5272 = ADVANCED_FACE('',(#5273),#5289,.T.);+#5273 = FACE_BOUND('',#5274,.T.);+#5274 = EDGE_LOOP('',(#5275,#5276,#5282,#5283));+#5275 = ORIENTED_EDGE('',*,*,#5252,.T.);+#5276 = ORIENTED_EDGE('',*,*,#5277,.T.);+#5277 = EDGE_CURVE('',#5245,#5078,#5278,.T.);+#5278 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5279,#5280,#5281),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5279 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.558931852983));+#5280 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.528220830294,+ 1.558931852983));+#5281 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.558931852983));+#5282 = ORIENTED_EDGE('',*,*,#5075,.F.);+#5283 = ORIENTED_EDGE('',*,*,#5284,.F.);+#5284 = EDGE_CURVE('',#5253,#5076,#5285,.T.);+#5285 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5286,#5287,#5288),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5286 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.552977284328));+#5287 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.528220830294,+ 1.552977284328));+#5288 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.552977284328));+#5289 = SURFACE_OF_LINEAR_EXTRUSION('',#5290,#5294);+#5290 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5291,#5292,#5293),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5291 = CARTESIAN_POINT('',(-5.415226621288E-02,-0.517463064657,+ 1.552977284328));+#5292 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.528220830294,+ 1.552977284328));+#5293 = CARTESIAN_POINT('',(-6.999816424564E-02,-0.553516117062,+ 1.552977284328));+#5294 = VECTOR('',#5295,1.);+#5295 = DIRECTION('',(-0.,-0.,-1.));+#5296 = ADVANCED_FACE('',(#5297,#5306),#5315,.F.);+#5297 = FACE_BOUND('',#5298,.T.);+#5298 = EDGE_LOOP('',(#5299,#5300,#5301,#5302,#5303,#5304,#5305));+#5299 = ORIENTED_EDGE('',*,*,#4876,.T.);+#5300 = ORIENTED_EDGE('',*,*,#4907,.T.);+#5301 = ORIENTED_EDGE('',*,*,#4938,.T.);+#5302 = ORIENTED_EDGE('',*,*,#4971,.T.);+#5303 = ORIENTED_EDGE('',*,*,#5004,.T.);+#5304 = ORIENTED_EDGE('',*,*,#5037,.T.);+#5305 = ORIENTED_EDGE('',*,*,#5061,.T.);+#5306 = FACE_BOUND('',#5307,.T.);+#5307 = EDGE_LOOP('',(#5308,#5309,#5310,#5311,#5312,#5313,#5314));+#5308 = ORIENTED_EDGE('',*,*,#5101,.T.);+#5309 = ORIENTED_EDGE('',*,*,#5132,.T.);+#5310 = ORIENTED_EDGE('',*,*,#5163,.T.);+#5311 = ORIENTED_EDGE('',*,*,#5194,.T.);+#5312 = ORIENTED_EDGE('',*,*,#5227,.T.);+#5313 = ORIENTED_EDGE('',*,*,#5260,.T.);+#5314 = ORIENTED_EDGE('',*,*,#5284,.T.);+#5315 = PLANE('',#5316);+#5316 = AXIS2_PLACEMENT_3D('',#5317,#5318,#5319);+#5317 = CARTESIAN_POINT('',(0.108377220031,-0.627948225252,+ 1.552977284328));+#5318 = DIRECTION('',(0.,0.,1.));+#5319 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5320 = ADVANCED_FACE('',(#5321,#5330),#5339,.T.);+#5321 = FACE_BOUND('',#5322,.F.);+#5322 = EDGE_LOOP('',(#5323,#5324,#5325,#5326,#5327,#5328,#5329));+#5323 = ORIENTED_EDGE('',*,*,#4860,.T.);+#5324 = ORIENTED_EDGE('',*,*,#4891,.T.);+#5325 = ORIENTED_EDGE('',*,*,#4922,.T.);+#5326 = ORIENTED_EDGE('',*,*,#4955,.T.);+#5327 = ORIENTED_EDGE('',*,*,#4988,.T.);+#5328 = ORIENTED_EDGE('',*,*,#5021,.T.);+#5329 = ORIENTED_EDGE('',*,*,#5054,.T.);+#5330 = FACE_BOUND('',#5331,.F.);+#5331 = EDGE_LOOP('',(#5332,#5333,#5334,#5335,#5336,#5337,#5338));+#5332 = ORIENTED_EDGE('',*,*,#5085,.T.);+#5333 = ORIENTED_EDGE('',*,*,#5116,.T.);+#5334 = ORIENTED_EDGE('',*,*,#5147,.T.);+#5335 = ORIENTED_EDGE('',*,*,#5178,.T.);+#5336 = ORIENTED_EDGE('',*,*,#5211,.T.);+#5337 = ORIENTED_EDGE('',*,*,#5244,.T.);+#5338 = ORIENTED_EDGE('',*,*,#5277,.T.);+#5339 = PLANE('',#5340);+#5340 = AXIS2_PLACEMENT_3D('',#5341,#5342,#5343);+#5341 = CARTESIAN_POINT('',(0.108377220031,-0.627948225252,+ 1.558931852983));+#5342 = DIRECTION('',(0.,0.,1.));+#5343 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5344 = MANIFOLD_SOLID_BREP('',#5345);+#5345 = CLOSED_SHELL('',(#5346,#5386,#5417,#5448,#5479,#5510,#5541,#5572+ ,#5603,#5634,#5665,#5687,#5706));+#5346 = ADVANCED_FACE('',(#5347),#5381,.T.);+#5347 = FACE_BOUND('',#5348,.T.);+#5348 = EDGE_LOOP('',(#5349,#5359,#5367,#5375));+#5349 = ORIENTED_EDGE('',*,*,#5350,.T.);+#5350 = EDGE_CURVE('',#5351,#5353,#5355,.T.);+#5351 = VERTEX_POINT('',#5352);+#5352 = CARTESIAN_POINT('',(0.108377220031,-0.421370049981,+ 1.552977284328));+#5353 = VERTEX_POINT('',#5354);+#5354 = CARTESIAN_POINT('',(0.108377220031,-0.421370049981,+ 1.558931852983));+#5355 = LINE('',#5356,#5357);+#5356 = CARTESIAN_POINT('',(0.108377220031,-0.421370049981,+ 1.552977284328));+#5357 = VECTOR('',#5358,1.);+#5358 = DIRECTION('',(0.,0.,1.));+#5359 = ORIENTED_EDGE('',*,*,#5360,.T.);+#5360 = EDGE_CURVE('',#5353,#5361,#5363,.T.);+#5361 = VERTEX_POINT('',#5362);+#5362 = CARTESIAN_POINT('',(7.057966509088E-02,-0.421370049981,+ 1.558931852983));+#5363 = LINE('',#5364,#5365);+#5364 = CARTESIAN_POINT('',(0.108377220031,-0.421370049981,+ 1.558931852983));+#5365 = VECTOR('',#5366,1.);+#5366 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5367 = ORIENTED_EDGE('',*,*,#5368,.F.);+#5368 = EDGE_CURVE('',#5369,#5361,#5371,.T.);+#5369 = VERTEX_POINT('',#5370);+#5370 = CARTESIAN_POINT('',(7.057966509088E-02,-0.421370049981,+ 1.552977284328));+#5371 = LINE('',#5372,#5373);+#5372 = CARTESIAN_POINT('',(7.057966509088E-02,-0.421370049981,+ 1.552977284328));+#5373 = VECTOR('',#5374,1.);+#5374 = DIRECTION('',(0.,0.,1.));+#5375 = ORIENTED_EDGE('',*,*,#5376,.F.);+#5376 = EDGE_CURVE('',#5351,#5369,#5377,.T.);+#5377 = LINE('',#5378,#5379);+#5378 = CARTESIAN_POINT('',(0.108377220031,-0.421370049981,+ 1.552977284328));+#5379 = VECTOR('',#5380,1.);+#5380 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5381 = PLANE('',#5382);+#5382 = AXIS2_PLACEMENT_3D('',#5383,#5384,#5385);+#5383 = CARTESIAN_POINT('',(0.108377220031,-0.421370049981,+ 1.552977284328));+#5384 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5385 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5386 = ADVANCED_FACE('',(#5387),#5412,.T.);+#5387 = FACE_BOUND('',#5388,.T.);+#5388 = EDGE_LOOP('',(#5389,#5390,#5398,#5406));+#5389 = ORIENTED_EDGE('',*,*,#5368,.T.);+#5390 = ORIENTED_EDGE('',*,*,#5391,.T.);+#5391 = EDGE_CURVE('',#5361,#5392,#5394,.T.);+#5392 = VERTEX_POINT('',#5393);+#5393 = CARTESIAN_POINT('',(7.057966509088E-02,-0.373396230249,+ 1.558931852983));+#5394 = LINE('',#5395,#5396);+#5395 = CARTESIAN_POINT('',(7.057966509088E-02,-0.421370049981,+ 1.558931852983));+#5396 = VECTOR('',#5397,1.);+#5397 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5398 = ORIENTED_EDGE('',*,*,#5399,.F.);+#5399 = EDGE_CURVE('',#5400,#5392,#5402,.T.);+#5400 = VERTEX_POINT('',#5401);+#5401 = CARTESIAN_POINT('',(7.057966509088E-02,-0.373396230249,+ 1.552977284328));+#5402 = LINE('',#5403,#5404);+#5403 = CARTESIAN_POINT('',(7.057966509088E-02,-0.373396230249,+ 1.552977284328));+#5404 = VECTOR('',#5405,1.);+#5405 = DIRECTION('',(0.,0.,1.));+#5406 = ORIENTED_EDGE('',*,*,#5407,.F.);+#5407 = EDGE_CURVE('',#5369,#5400,#5408,.T.);+#5408 = LINE('',#5409,#5410);+#5409 = CARTESIAN_POINT('',(7.057966509088E-02,-0.421370049981,+ 1.552977284328));+#5410 = VECTOR('',#5411,1.);+#5411 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5412 = PLANE('',#5413);+#5413 = AXIS2_PLACEMENT_3D('',#5414,#5415,#5416);+#5414 = CARTESIAN_POINT('',(7.057966509088E-02,-0.421370049981,+ 1.552977284328));+#5415 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5416 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5417 = ADVANCED_FACE('',(#5418),#5443,.T.);+#5418 = FACE_BOUND('',#5419,.T.);+#5419 = EDGE_LOOP('',(#5420,#5421,#5429,#5437));+#5420 = ORIENTED_EDGE('',*,*,#5399,.T.);+#5421 = ORIENTED_EDGE('',*,*,#5422,.T.);+#5422 = EDGE_CURVE('',#5392,#5423,#5425,.T.);+#5423 = VERTEX_POINT('',#5424);+#5424 = CARTESIAN_POINT('',(-7.028891466826E-02,-0.373396230249,+ 1.558931852983));+#5425 = LINE('',#5426,#5427);+#5426 = CARTESIAN_POINT('',(7.057966509088E-02,-0.373396230249,+ 1.558931852983));+#5427 = VECTOR('',#5428,1.);+#5428 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5429 = ORIENTED_EDGE('',*,*,#5430,.F.);+#5430 = EDGE_CURVE('',#5431,#5423,#5433,.T.);+#5431 = VERTEX_POINT('',#5432);+#5432 = CARTESIAN_POINT('',(-7.028891466826E-02,-0.373396230249,+ 1.552977284328));+#5433 = LINE('',#5434,#5435);+#5434 = CARTESIAN_POINT('',(-7.028891466826E-02,-0.373396230249,+ 1.552977284328));+#5435 = VECTOR('',#5436,1.);+#5436 = DIRECTION('',(0.,0.,1.));+#5437 = ORIENTED_EDGE('',*,*,#5438,.F.);+#5438 = EDGE_CURVE('',#5400,#5431,#5439,.T.);+#5439 = LINE('',#5440,#5441);+#5440 = CARTESIAN_POINT('',(7.057966509088E-02,-0.373396230249,+ 1.552977284328));+#5441 = VECTOR('',#5442,1.);+#5442 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5443 = PLANE('',#5444);+#5444 = AXIS2_PLACEMENT_3D('',#5445,#5446,#5447);+#5445 = CARTESIAN_POINT('',(7.057966509088E-02,-0.373396230249,+ 1.552977284328));+#5446 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5447 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5448 = ADVANCED_FACE('',(#5449),#5474,.T.);+#5449 = FACE_BOUND('',#5450,.T.);+#5450 = EDGE_LOOP('',(#5451,#5452,#5460,#5468));+#5451 = ORIENTED_EDGE('',*,*,#5430,.T.);+#5452 = ORIENTED_EDGE('',*,*,#5453,.T.);+#5453 = EDGE_CURVE('',#5423,#5454,#5456,.T.);+#5454 = VERTEX_POINT('',#5455);+#5455 = CARTESIAN_POINT('',(-5.924039860872E-02,-0.418026420121,+ 1.558931852983));+#5456 = LINE('',#5457,#5458);+#5457 = CARTESIAN_POINT('',(-7.028891466826E-02,-0.373396230249,+ 1.558931852983));+#5458 = VECTOR('',#5459,1.);+#5459 = DIRECTION('',(0.240303066167,-0.970697912015,0.));+#5460 = ORIENTED_EDGE('',*,*,#5461,.F.);+#5461 = EDGE_CURVE('',#5462,#5454,#5464,.T.);+#5462 = VERTEX_POINT('',#5463);+#5463 = CARTESIAN_POINT('',(-5.924039860872E-02,-0.418026420121,+ 1.552977284328));+#5464 = LINE('',#5465,#5466);+#5465 = CARTESIAN_POINT('',(-5.924039860872E-02,-0.418026420121,+ 1.552977284328));+#5466 = VECTOR('',#5467,1.);+#5467 = DIRECTION('',(0.,0.,1.));+#5468 = ORIENTED_EDGE('',*,*,#5469,.F.);+#5469 = EDGE_CURVE('',#5431,#5462,#5470,.T.);+#5470 = LINE('',#5471,#5472);+#5471 = CARTESIAN_POINT('',(-7.028891466826E-02,-0.373396230249,+ 1.552977284328));+#5472 = VECTOR('',#5473,1.);+#5473 = DIRECTION('',(0.240303066167,-0.970697912015,0.));+#5474 = PLANE('',#5475);+#5475 = AXIS2_PLACEMENT_3D('',#5476,#5477,#5478);+#5476 = CARTESIAN_POINT('',(-7.028891466826E-02,-0.373396230249,+ 1.552977284328));+#5477 = DIRECTION('',(0.970697912015,0.240303066167,-0.));+#5478 = DIRECTION('',(0.240303066167,-0.970697912015,0.));+#5479 = ADVANCED_FACE('',(#5480),#5505,.T.);+#5480 = FACE_BOUND('',#5481,.T.);+#5481 = EDGE_LOOP('',(#5482,#5483,#5491,#5499));+#5482 = ORIENTED_EDGE('',*,*,#5461,.T.);+#5483 = ORIENTED_EDGE('',*,*,#5484,.T.);+#5484 = EDGE_CURVE('',#5454,#5485,#5487,.T.);+#5485 = VERTEX_POINT('',#5486);+#5486 = CARTESIAN_POINT('',(-9.791020481711E-02,-0.418026420121,+ 1.558931852983));+#5487 = LINE('',#5488,#5489);+#5488 = CARTESIAN_POINT('',(-5.924039860872E-02,-0.418026420121,+ 1.558931852983));+#5489 = VECTOR('',#5490,1.);+#5490 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5491 = ORIENTED_EDGE('',*,*,#5492,.F.);+#5492 = EDGE_CURVE('',#5493,#5485,#5495,.T.);+#5493 = VERTEX_POINT('',#5494);+#5494 = CARTESIAN_POINT('',(-9.791020481711E-02,-0.418026420121,+ 1.552977284328));+#5495 = LINE('',#5496,#5497);+#5496 = CARTESIAN_POINT('',(-9.791020481711E-02,-0.418026420121,+ 1.552977284328));+#5497 = VECTOR('',#5498,1.);+#5498 = DIRECTION('',(0.,0.,1.));+#5499 = ORIENTED_EDGE('',*,*,#5500,.F.);+#5500 = EDGE_CURVE('',#5462,#5493,#5501,.T.);+#5501 = LINE('',#5502,#5503);+#5502 = CARTESIAN_POINT('',(-5.924039860872E-02,-0.418026420121,+ 1.552977284328));+#5503 = VECTOR('',#5504,1.);+#5504 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5505 = PLANE('',#5506);+#5506 = AXIS2_PLACEMENT_3D('',#5507,#5508,#5509);+#5507 = CARTESIAN_POINT('',(-5.924039860872E-02,-0.418026420121,+ 1.552977284328));+#5508 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5509 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5510 = ADVANCED_FACE('',(#5511),#5536,.T.);+#5511 = FACE_BOUND('',#5512,.T.);+#5512 = EDGE_LOOP('',(#5513,#5514,#5522,#5530));+#5513 = ORIENTED_EDGE('',*,*,#5492,.T.);+#5514 = ORIENTED_EDGE('',*,*,#5515,.T.);+#5515 = EDGE_CURVE('',#5485,#5516,#5518,.T.);+#5516 = VERTEX_POINT('',#5517);+#5517 = CARTESIAN_POINT('',(-0.108667970454,-0.373105479826,+ 1.558931852983));+#5518 = LINE('',#5519,#5520);+#5519 = CARTESIAN_POINT('',(-9.79102048171E-02,-0.418026420121,+ 1.558931852983));+#5520 = VECTOR('',#5521,1.);+#5521 = DIRECTION('',(-0.232896789262,0.972501457866,0.));+#5522 = ORIENTED_EDGE('',*,*,#5523,.F.);+#5523 = EDGE_CURVE('',#5524,#5516,#5526,.T.);+#5524 = VERTEX_POINT('',#5525);+#5525 = CARTESIAN_POINT('',(-0.108667970454,-0.373105479826,+ 1.552977284328));+#5526 = LINE('',#5527,#5528);+#5527 = CARTESIAN_POINT('',(-0.108667970454,-0.373105479826,+ 1.552977284328));+#5528 = VECTOR('',#5529,1.);+#5529 = DIRECTION('',(0.,0.,1.));+#5530 = ORIENTED_EDGE('',*,*,#5531,.F.);+#5531 = EDGE_CURVE('',#5493,#5524,#5532,.T.);+#5532 = LINE('',#5533,#5534);+#5533 = CARTESIAN_POINT('',(-9.79102048171E-02,-0.418026420121,+ 1.552977284328));+#5534 = VECTOR('',#5535,1.);+#5535 = DIRECTION('',(-0.232896789262,0.972501457866,0.));+#5536 = PLANE('',#5537);+#5537 = AXIS2_PLACEMENT_3D('',#5538,#5539,#5540);+#5538 = CARTESIAN_POINT('',(-9.79102048171E-02,-0.418026420121,+ 1.552977284328));+#5539 = DIRECTION('',(-0.972501457866,-0.232896789262,0.));+#5540 = DIRECTION('',(-0.232896789262,0.972501457866,0.));+#5541 = ADVANCED_FACE('',(#5542),#5567,.T.);+#5542 = FACE_BOUND('',#5543,.T.);+#5543 = EDGE_LOOP('',(#5544,#5545,#5553,#5561));+#5544 = ORIENTED_EDGE('',*,*,#5523,.T.);+#5545 = ORIENTED_EDGE('',*,*,#5546,.T.);+#5546 = EDGE_CURVE('',#5516,#5547,#5549,.T.);+#5547 = VERTEX_POINT('',#5548);+#5548 = CARTESIAN_POINT('',(-0.108667970454,-0.331673544603,+ 1.558931852983));+#5549 = LINE('',#5550,#5551);+#5550 = CARTESIAN_POINT('',(-0.108667970454,-0.373105479826,+ 1.558931852983));+#5551 = VECTOR('',#5552,1.);+#5552 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5553 = ORIENTED_EDGE('',*,*,#5554,.F.);+#5554 = EDGE_CURVE('',#5555,#5547,#5557,.T.);+#5555 = VERTEX_POINT('',#5556);+#5556 = CARTESIAN_POINT('',(-0.108667970454,-0.331673544603,+ 1.552977284328));+#5557 = LINE('',#5558,#5559);+#5558 = CARTESIAN_POINT('',(-0.108667970454,-0.331673544603,+ 1.552977284328));+#5559 = VECTOR('',#5560,1.);+#5560 = DIRECTION('',(0.,0.,1.));+#5561 = ORIENTED_EDGE('',*,*,#5562,.F.);+#5562 = EDGE_CURVE('',#5524,#5555,#5563,.T.);+#5563 = LINE('',#5564,#5565);+#5564 = CARTESIAN_POINT('',(-0.108667970454,-0.373105479826,+ 1.552977284328));+#5565 = VECTOR('',#5566,1.);+#5566 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5567 = PLANE('',#5568);+#5568 = AXIS2_PLACEMENT_3D('',#5569,#5570,#5571);+#5569 = CARTESIAN_POINT('',(-0.108667970454,-0.373105479826,+ 1.552977284328));+#5570 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5571 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5572 = ADVANCED_FACE('',(#5573),#5598,.T.);+#5573 = FACE_BOUND('',#5574,.T.);+#5574 = EDGE_LOOP('',(#5575,#5576,#5584,#5592));+#5575 = ORIENTED_EDGE('',*,*,#5554,.T.);+#5576 = ORIENTED_EDGE('',*,*,#5577,.T.);+#5577 = EDGE_CURVE('',#5547,#5578,#5580,.T.);+#5578 = VERTEX_POINT('',#5579);+#5579 = CARTESIAN_POINT('',(7.057966509088E-02,-0.331673544603,+ 1.558931852983));+#5580 = LINE('',#5581,#5582);+#5581 = CARTESIAN_POINT('',(-0.108667970454,-0.331673544603,+ 1.558931852983));+#5582 = VECTOR('',#5583,1.);+#5583 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5584 = ORIENTED_EDGE('',*,*,#5585,.F.);+#5585 = EDGE_CURVE('',#5586,#5578,#5588,.T.);+#5586 = VERTEX_POINT('',#5587);+#5587 = CARTESIAN_POINT('',(7.057966509088E-02,-0.331673544603,+ 1.552977284328));+#5588 = LINE('',#5589,#5590);+#5589 = CARTESIAN_POINT('',(7.057966509088E-02,-0.331673544603,+ 1.552977284328));+#5590 = VECTOR('',#5591,1.);+#5591 = DIRECTION('',(0.,0.,1.));+#5592 = ORIENTED_EDGE('',*,*,#5593,.F.);+#5593 = EDGE_CURVE('',#5555,#5586,#5594,.T.);+#5594 = LINE('',#5595,#5596);+#5595 = CARTESIAN_POINT('',(-0.108667970454,-0.331673544603,+ 1.552977284328));+#5596 = VECTOR('',#5597,1.);+#5597 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5598 = PLANE('',#5599);+#5599 = AXIS2_PLACEMENT_3D('',#5600,#5601,#5602);+#5600 = CARTESIAN_POINT('',(-0.108667970454,-0.331673544603,+ 1.552977284328));+#5601 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#5602 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5603 = ADVANCED_FACE('',(#5604),#5629,.T.);+#5604 = FACE_BOUND('',#5605,.T.);+#5605 = EDGE_LOOP('',(#5606,#5607,#5615,#5623));+#5606 = ORIENTED_EDGE('',*,*,#5585,.T.);+#5607 = ORIENTED_EDGE('',*,*,#5608,.T.);+#5608 = EDGE_CURVE('',#5578,#5609,#5611,.T.);+#5609 = VERTEX_POINT('',#5610);+#5610 = CARTESIAN_POINT('',(7.057966509088E-02,-0.283699724871,+ 1.558931852983));+#5611 = LINE('',#5612,#5613);+#5612 = CARTESIAN_POINT('',(7.057966509088E-02,-0.331673544603,+ 1.558931852983));+#5613 = VECTOR('',#5614,1.);+#5614 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5615 = ORIENTED_EDGE('',*,*,#5616,.F.);+#5616 = EDGE_CURVE('',#5617,#5609,#5619,.T.);+#5617 = VERTEX_POINT('',#5618);+#5618 = CARTESIAN_POINT('',(7.057966509088E-02,-0.283699724871,+ 1.552977284328));+#5619 = LINE('',#5620,#5621);+#5620 = CARTESIAN_POINT('',(7.057966509088E-02,-0.283699724871,+ 1.552977284328));+#5621 = VECTOR('',#5622,1.);+#5622 = DIRECTION('',(0.,0.,1.));+#5623 = ORIENTED_EDGE('',*,*,#5624,.F.);+#5624 = EDGE_CURVE('',#5586,#5617,#5625,.T.);+#5625 = LINE('',#5626,#5627);+#5626 = CARTESIAN_POINT('',(7.057966509088E-02,-0.331673544603,+ 1.552977284328));+#5627 = VECTOR('',#5628,1.);+#5628 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5629 = PLANE('',#5630);+#5630 = AXIS2_PLACEMENT_3D('',#5631,#5632,#5633);+#5631 = CARTESIAN_POINT('',(7.057966509088E-02,-0.331673544603,+ 1.552977284328));+#5632 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5633 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5634 = ADVANCED_FACE('',(#5635),#5660,.T.);+#5635 = FACE_BOUND('',#5636,.T.);+#5636 = EDGE_LOOP('',(#5637,#5638,#5646,#5654));+#5637 = ORIENTED_EDGE('',*,*,#5616,.T.);+#5638 = ORIENTED_EDGE('',*,*,#5639,.T.);+#5639 = EDGE_CURVE('',#5609,#5640,#5642,.T.);+#5640 = VERTEX_POINT('',#5641);+#5641 = CARTESIAN_POINT('',(0.108377220031,-0.283699724871,+ 1.558931852983));+#5642 = LINE('',#5643,#5644);+#5643 = CARTESIAN_POINT('',(7.057966509088E-02,-0.283699724871,+ 1.558931852983));+#5644 = VECTOR('',#5645,1.);+#5645 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5646 = ORIENTED_EDGE('',*,*,#5647,.F.);+#5647 = EDGE_CURVE('',#5648,#5640,#5650,.T.);+#5648 = VERTEX_POINT('',#5649);+#5649 = CARTESIAN_POINT('',(0.108377220031,-0.283699724871,+ 1.552977284328));+#5650 = LINE('',#5651,#5652);+#5651 = CARTESIAN_POINT('',(0.108377220031,-0.283699724871,+ 1.552977284328));+#5652 = VECTOR('',#5653,1.);+#5653 = DIRECTION('',(0.,0.,1.));+#5654 = ORIENTED_EDGE('',*,*,#5655,.F.);+#5655 = EDGE_CURVE('',#5617,#5648,#5656,.T.);+#5656 = LINE('',#5657,#5658);+#5657 = CARTESIAN_POINT('',(7.057966509088E-02,-0.283699724871,+ 1.552977284328));+#5658 = VECTOR('',#5659,1.);+#5659 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5660 = PLANE('',#5661);+#5661 = AXIS2_PLACEMENT_3D('',#5662,#5663,#5664);+#5662 = CARTESIAN_POINT('',(7.057966509088E-02,-0.283699724871,+ 1.552977284328));+#5663 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#5664 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5665 = ADVANCED_FACE('',(#5666),#5682,.T.);+#5666 = FACE_BOUND('',#5667,.T.);+#5667 = EDGE_LOOP('',(#5668,#5669,#5675,#5676));+#5668 = ORIENTED_EDGE('',*,*,#5647,.T.);+#5669 = ORIENTED_EDGE('',*,*,#5670,.T.);+#5670 = EDGE_CURVE('',#5640,#5353,#5671,.T.);+#5671 = LINE('',#5672,#5673);+#5672 = CARTESIAN_POINT('',(0.108377220031,-0.283699724871,+ 1.558931852983));+#5673 = VECTOR('',#5674,1.);+#5674 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5675 = ORIENTED_EDGE('',*,*,#5350,.F.);+#5676 = ORIENTED_EDGE('',*,*,#5677,.F.);+#5677 = EDGE_CURVE('',#5648,#5351,#5678,.T.);+#5678 = LINE('',#5679,#5680);+#5679 = CARTESIAN_POINT('',(0.108377220031,-0.283699724871,+ 1.552977284328));+#5680 = VECTOR('',#5681,1.);+#5681 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5682 = PLANE('',#5683);+#5683 = AXIS2_PLACEMENT_3D('',#5684,#5685,#5686);+#5684 = CARTESIAN_POINT('',(0.108377220031,-0.283699724871,+ 1.552977284328));+#5685 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5686 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5687 = ADVANCED_FACE('',(#5688),#5701,.F.);+#5688 = FACE_BOUND('',#5689,.T.);+#5689 = EDGE_LOOP('',(#5690,#5691,#5692,#5693,#5694,#5695,#5696,#5697,+ #5698,#5699,#5700));+#5690 = ORIENTED_EDGE('',*,*,#5376,.T.);+#5691 = ORIENTED_EDGE('',*,*,#5407,.T.);+#5692 = ORIENTED_EDGE('',*,*,#5438,.T.);+#5693 = ORIENTED_EDGE('',*,*,#5469,.T.);+#5694 = ORIENTED_EDGE('',*,*,#5500,.T.);+#5695 = ORIENTED_EDGE('',*,*,#5531,.T.);+#5696 = ORIENTED_EDGE('',*,*,#5562,.T.);+#5697 = ORIENTED_EDGE('',*,*,#5593,.T.);+#5698 = ORIENTED_EDGE('',*,*,#5624,.T.);+#5699 = ORIENTED_EDGE('',*,*,#5655,.T.);+#5700 = ORIENTED_EDGE('',*,*,#5677,.T.);+#5701 = PLANE('',#5702);+#5702 = AXIS2_PLACEMENT_3D('',#5703,#5704,#5705);+#5703 = CARTESIAN_POINT('',(0.108377220031,-0.448700589707,+ 1.552977284328));+#5704 = DIRECTION('',(0.,0.,1.));+#5705 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5706 = ADVANCED_FACE('',(#5707),#5720,.T.);+#5707 = FACE_BOUND('',#5708,.F.);+#5708 = EDGE_LOOP('',(#5709,#5710,#5711,#5712,#5713,#5714,#5715,#5716,+ #5717,#5718,#5719));+#5709 = ORIENTED_EDGE('',*,*,#5360,.T.);+#5710 = ORIENTED_EDGE('',*,*,#5391,.T.);+#5711 = ORIENTED_EDGE('',*,*,#5422,.T.);+#5712 = ORIENTED_EDGE('',*,*,#5453,.T.);+#5713 = ORIENTED_EDGE('',*,*,#5484,.T.);+#5714 = ORIENTED_EDGE('',*,*,#5515,.T.);+#5715 = ORIENTED_EDGE('',*,*,#5546,.T.);+#5716 = ORIENTED_EDGE('',*,*,#5577,.T.);+#5717 = ORIENTED_EDGE('',*,*,#5608,.T.);+#5718 = ORIENTED_EDGE('',*,*,#5639,.T.);+#5719 = ORIENTED_EDGE('',*,*,#5670,.T.);+#5720 = PLANE('',#5721);+#5721 = AXIS2_PLACEMENT_3D('',#5722,#5723,#5724);+#5722 = CARTESIAN_POINT('',(0.108377220031,-0.448700589707,+ 1.558931852983));+#5723 = DIRECTION('',(0.,0.,1.));+#5724 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5725 = MANIFOLD_SOLID_BREP('',#5726);+#5726 = CLOSED_SHELL('',(#5727,#5769,#5802,#5835,#5868,#5901,#5934,#5967+ ,#5991,#6007));+#5727 = ADVANCED_FACE('',(#5728),#5762,.T.);+#5728 = FACE_BOUND('',#5729,.T.);+#5729 = EDGE_LOOP('',(#5730,#5740,#5748,#5756));+#5730 = ORIENTED_EDGE('',*,*,#5731,.T.);+#5731 = EDGE_CURVE('',#5732,#5734,#5736,.T.);+#5732 = VERTEX_POINT('',#5733);+#5733 = CARTESIAN_POINT('',(7.268760565484E-05,-0.197928350198,+ 1.552977284328));+#5734 = VERTEX_POINT('',#5735);+#5735 = CARTESIAN_POINT('',(7.268760565484E-05,-0.197928350198,+ 1.558931852983));+#5736 = LINE('',#5737,#5738);+#5737 = CARTESIAN_POINT('',(7.268760565484E-05,-0.197928350198,+ 1.552977284328));+#5738 = VECTOR('',#5739,1.);+#5739 = DIRECTION('',(0.,0.,1.));+#5740 = ORIENTED_EDGE('',*,*,#5741,.T.);+#5741 = EDGE_CURVE('',#5734,#5742,#5744,.T.);+#5742 = VERTEX_POINT('',#5743);+#5743 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.558931852983));+#5744 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5745,#5746,#5747),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5745 = CARTESIAN_POINT('',(7.268760565493E-05,-0.197928350198,+ 1.558931852983));+#5746 = CARTESIAN_POINT('',(-7.632198593761E-03,-0.197928350198,+ 1.558931852983));+#5747 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.558931852983));+#5748 = ORIENTED_EDGE('',*,*,#5749,.F.);+#5749 = EDGE_CURVE('',#5750,#5742,#5752,.T.);+#5750 = VERTEX_POINT('',#5751);+#5751 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.552977284328));+#5752 = LINE('',#5753,#5754);+#5753 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.552977284328));+#5754 = VECTOR('',#5755,1.);+#5755 = DIRECTION('',(0.,0.,1.));+#5756 = ORIENTED_EDGE('',*,*,#5757,.F.);+#5757 = EDGE_CURVE('',#5732,#5750,#5758,.T.);+#5758 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5759,#5760,#5761),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5759 = CARTESIAN_POINT('',(7.268760565493E-05,-0.197928350198,+ 1.552977284328));+#5760 = CARTESIAN_POINT('',(-7.632198593761E-03,-0.197928350198,+ 1.552977284328));+#5761 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.552977284328));+#5762 = SURFACE_OF_LINEAR_EXTRUSION('',#5763,#5767);+#5763 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5764,#5765,#5766),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5764 = CARTESIAN_POINT('',(7.268760565493E-05,-0.197928350198,+ 1.552977284328));+#5765 = CARTESIAN_POINT('',(-7.632198593761E-03,-0.197928350198,+ 1.552977284328));+#5766 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.552977284328));+#5767 = VECTOR('',#5768,1.);+#5768 = DIRECTION('',(-0.,-0.,-1.));+#5769 = ADVANCED_FACE('',(#5770),#5795,.T.);+#5770 = FACE_BOUND('',#5771,.T.);+#5771 = EDGE_LOOP('',(#5772,#5773,#5781,#5789));+#5772 = ORIENTED_EDGE('',*,*,#5749,.T.);+#5773 = ORIENTED_EDGE('',*,*,#5774,.T.);+#5774 = EDGE_CURVE('',#5742,#5775,#5777,.T.);+#5775 = VERTEX_POINT('',#5776);+#5776 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.558931852983));+#5777 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5778,#5779,#5780),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5778 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.558931852983));+#5779 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.187461334984,+ 1.558931852983));+#5780 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.558931852983));+#5781 = ORIENTED_EDGE('',*,*,#5782,.F.);+#5782 = EDGE_CURVE('',#5783,#5775,#5785,.T.);+#5783 = VERTEX_POINT('',#5784);+#5784 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5785 = LINE('',#5786,#5787);+#5786 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5787 = VECTOR('',#5788,1.);+#5788 = DIRECTION('',(0.,0.,1.));+#5789 = ORIENTED_EDGE('',*,*,#5790,.F.);+#5790 = EDGE_CURVE('',#5750,#5783,#5791,.T.);+#5791 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5792,#5793,#5794),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5792 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.552977284328));+#5793 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.187461334984,+ 1.552977284328));+#5794 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5795 = SURFACE_OF_LINEAR_EXTRUSION('',#5796,#5800);+#5796 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5797,#5798,#5799),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5797 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.192694842591,+ 1.552977284328));+#5798 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.187461334984,+ 1.552977284328));+#5799 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5800 = VECTOR('',#5801,1.);+#5801 = DIRECTION('',(-0.,-0.,-1.));+#5802 = ADVANCED_FACE('',(#5803),#5828,.T.);+#5803 = FACE_BOUND('',#5804,.T.);+#5804 = EDGE_LOOP('',(#5805,#5806,#5814,#5822));+#5805 = ORIENTED_EDGE('',*,*,#5782,.T.);+#5806 = ORIENTED_EDGE('',*,*,#5807,.T.);+#5807 = EDGE_CURVE('',#5775,#5808,#5810,.T.);+#5808 = VERTEX_POINT('',#5809);+#5809 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.558931852983));+#5810 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5811,#5812,#5813),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5811 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.558931852983));+#5812 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.172196937796,+ 1.558931852983));+#5813 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.558931852983));+#5814 = ORIENTED_EDGE('',*,*,#5815,.F.);+#5815 = EDGE_CURVE('',#5816,#5808,#5818,.T.);+#5816 = VERTEX_POINT('',#5817);+#5817 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5818 = LINE('',#5819,#5820);+#5819 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5820 = VECTOR('',#5821,1.);+#5821 = DIRECTION('',(0.,0.,1.));+#5822 = ORIENTED_EDGE('',*,*,#5823,.F.);+#5823 = EDGE_CURVE('',#5783,#5816,#5824,.T.);+#5824 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5825,#5826,#5827),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5825 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5826 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.172196937796,+ 1.552977284328));+#5827 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5828 = SURFACE_OF_LINEAR_EXTRUSION('',#5829,#5833);+#5829 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5830,#5831,#5832),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5830 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5831 = CARTESIAN_POINT('',(-1.809921380806E-02,-0.172196937796,+ 1.552977284328));+#5832 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5833 = VECTOR('',#5834,1.);+#5834 = DIRECTION('',(-0.,-0.,-1.));+#5835 = ADVANCED_FACE('',(#5836),#5861,.T.);+#5836 = FACE_BOUND('',#5837,.T.);+#5837 = EDGE_LOOP('',(#5838,#5839,#5847,#5855));+#5838 = ORIENTED_EDGE('',*,*,#5815,.T.);+#5839 = ORIENTED_EDGE('',*,*,#5840,.T.);+#5840 = EDGE_CURVE('',#5808,#5841,#5843,.T.);+#5841 = VERTEX_POINT('',#5842);+#5842 = CARTESIAN_POINT('',(7.268760565485E-05,-0.161729922582,+ 1.558931852983));+#5843 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5844,#5845,#5846),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5844 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.558931852983));+#5845 = CARTESIAN_POINT('',(-7.632198593761E-03,-0.161729922582,+ 1.558931852983));+#5846 = CARTESIAN_POINT('',(7.268760565493E-05,-0.161729922582,+ 1.558931852983));+#5847 = ORIENTED_EDGE('',*,*,#5848,.F.);+#5848 = EDGE_CURVE('',#5849,#5841,#5851,.T.);+#5849 = VERTEX_POINT('',#5850);+#5850 = CARTESIAN_POINT('',(7.268760565485E-05,-0.161729922582,+ 1.552977284328));+#5851 = LINE('',#5852,#5853);+#5852 = CARTESIAN_POINT('',(7.268760565485E-05,-0.161729922582,+ 1.552977284328));+#5853 = VECTOR('',#5854,1.);+#5854 = DIRECTION('',(0.,0.,1.));+#5855 = ORIENTED_EDGE('',*,*,#5856,.F.);+#5856 = EDGE_CURVE('',#5816,#5849,#5857,.T.);+#5857 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5858,#5859,#5860),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5858 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5859 = CARTESIAN_POINT('',(-7.632198593761E-03,-0.161729922582,+ 1.552977284328));+#5860 = CARTESIAN_POINT('',(7.268760565493E-05,-0.161729922582,+ 1.552977284328));+#5861 = SURFACE_OF_LINEAR_EXTRUSION('',#5862,#5866);+#5862 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5863,#5864,#5865),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5863 = CARTESIAN_POINT('',(-1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5864 = CARTESIAN_POINT('',(-7.632198593761E-03,-0.161729922582,+ 1.552977284328));+#5865 = CARTESIAN_POINT('',(7.268760565493E-05,-0.161729922582,+ 1.552977284328));+#5866 = VECTOR('',#5867,1.);+#5867 = DIRECTION('',(-0.,-0.,-1.));+#5868 = ADVANCED_FACE('',(#5869),#5894,.T.);+#5869 = FACE_BOUND('',#5870,.T.);+#5870 = EDGE_LOOP('',(#5871,#5872,#5880,#5888));+#5871 = ORIENTED_EDGE('',*,*,#5848,.T.);+#5872 = ORIENTED_EDGE('',*,*,#5873,.T.);+#5873 = EDGE_CURVE('',#5841,#5874,#5876,.T.);+#5874 = VERTEX_POINT('',#5875);+#5875 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.558931852983));+#5876 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5877,#5878,#5879),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5877 = CARTESIAN_POINT('',(7.268760565493E-05,-0.161729922582,+ 1.558931852983));+#5878 = CARTESIAN_POINT('',(7.632198593761E-03,-0.161729922582,+ 1.558931852983));+#5879 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.558931852983));+#5880 = ORIENTED_EDGE('',*,*,#5881,.F.);+#5881 = EDGE_CURVE('',#5882,#5874,#5884,.T.);+#5882 = VERTEX_POINT('',#5883);+#5883 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5884 = LINE('',#5885,#5886);+#5885 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5886 = VECTOR('',#5887,1.);+#5887 = DIRECTION('',(0.,0.,1.));+#5888 = ORIENTED_EDGE('',*,*,#5889,.F.);+#5889 = EDGE_CURVE('',#5849,#5882,#5890,.T.);+#5890 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5891,#5892,#5893),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5891 = CARTESIAN_POINT('',(7.268760565493E-05,-0.161729922582,+ 1.552977284328));+#5892 = CARTESIAN_POINT('',(7.632198593761E-03,-0.161729922582,+ 1.552977284328));+#5893 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5894 = SURFACE_OF_LINEAR_EXTRUSION('',#5895,#5899);+#5895 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5896,#5897,#5898),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5896 = CARTESIAN_POINT('',(7.268760565493E-05,-0.161729922582,+ 1.552977284328));+#5897 = CARTESIAN_POINT('',(7.632198593761E-03,-0.161729922582,+ 1.552977284328));+#5898 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5899 = VECTOR('',#5900,1.);+#5900 = DIRECTION('',(-0.,-0.,-1.));+#5901 = ADVANCED_FACE('',(#5902),#5927,.T.);+#5902 = FACE_BOUND('',#5903,.T.);+#5903 = EDGE_LOOP('',(#5904,#5905,#5913,#5921));+#5904 = ORIENTED_EDGE('',*,*,#5881,.T.);+#5905 = ORIENTED_EDGE('',*,*,#5906,.T.);+#5906 = EDGE_CURVE('',#5874,#5907,#5909,.T.);+#5907 = VERTEX_POINT('',#5908);+#5908 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.558931852983));+#5909 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5910,#5911,#5912),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5910 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.558931852983));+#5911 = CARTESIAN_POINT('',(1.809921380806E-02,-0.172196937796,+ 1.558931852983));+#5912 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.558931852983));+#5913 = ORIENTED_EDGE('',*,*,#5914,.F.);+#5914 = EDGE_CURVE('',#5915,#5907,#5917,.T.);+#5915 = VERTEX_POINT('',#5916);+#5916 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5917 = LINE('',#5918,#5919);+#5918 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5919 = VECTOR('',#5920,1.);+#5920 = DIRECTION('',(0.,0.,1.));+#5921 = ORIENTED_EDGE('',*,*,#5922,.F.);+#5922 = EDGE_CURVE('',#5882,#5915,#5923,.T.);+#5923 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5924,#5925,#5926),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5924 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5925 = CARTESIAN_POINT('',(1.809921380806E-02,-0.172196937796,+ 1.552977284328));+#5926 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5927 = SURFACE_OF_LINEAR_EXTRUSION('',#5928,#5932);+#5928 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5929,#5930,#5931),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5929 = CARTESIAN_POINT('',(1.286570620091E-02,-0.166963430189,+ 1.552977284328));+#5930 = CARTESIAN_POINT('',(1.809921380806E-02,-0.172196937796,+ 1.552977284328));+#5931 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5932 = VECTOR('',#5933,1.);+#5933 = DIRECTION('',(-0.,-0.,-1.));+#5934 = ADVANCED_FACE('',(#5935),#5960,.T.);+#5935 = FACE_BOUND('',#5936,.T.);+#5936 = EDGE_LOOP('',(#5937,#5938,#5946,#5954));+#5937 = ORIENTED_EDGE('',*,*,#5914,.T.);+#5938 = ORIENTED_EDGE('',*,*,#5939,.T.);+#5939 = EDGE_CURVE('',#5907,#5940,#5942,.T.);+#5940 = VERTEX_POINT('',#5941);+#5941 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.558931852983));+#5942 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5943,#5944,#5945),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5943 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.558931852983));+#5944 = CARTESIAN_POINT('',(1.809921380806E-02,-0.187461334984,+ 1.558931852983));+#5945 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.558931852983));+#5946 = ORIENTED_EDGE('',*,*,#5947,.F.);+#5947 = EDGE_CURVE('',#5948,#5940,#5950,.T.);+#5948 = VERTEX_POINT('',#5949);+#5949 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.552977284328));+#5950 = LINE('',#5951,#5952);+#5951 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.552977284328));+#5952 = VECTOR('',#5953,1.);+#5953 = DIRECTION('',(0.,0.,1.));+#5954 = ORIENTED_EDGE('',*,*,#5955,.F.);+#5955 = EDGE_CURVE('',#5915,#5948,#5956,.T.);+#5956 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5957,#5958,#5959),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5957 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5958 = CARTESIAN_POINT('',(1.809921380806E-02,-0.187461334984,+ 1.552977284328));+#5959 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.552977284328));+#5960 = SURFACE_OF_LINEAR_EXTRUSION('',#5961,#5965);+#5961 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5962,#5963,#5964),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5962 = CARTESIAN_POINT('',(1.809921380806E-02,-0.179901823996,+ 1.552977284328));+#5963 = CARTESIAN_POINT('',(1.809921380806E-02,-0.187461334984,+ 1.552977284328));+#5964 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.552977284328));+#5965 = VECTOR('',#5966,1.);+#5966 = DIRECTION('',(-0.,-0.,-1.));+#5967 = ADVANCED_FACE('',(#5968),#5984,.T.);+#5968 = FACE_BOUND('',#5969,.T.);+#5969 = EDGE_LOOP('',(#5970,#5971,#5977,#5978));+#5970 = ORIENTED_EDGE('',*,*,#5947,.T.);+#5971 = ORIENTED_EDGE('',*,*,#5972,.T.);+#5972 = EDGE_CURVE('',#5940,#5734,#5973,.T.);+#5973 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5974,#5975,#5976),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5974 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.558931852983));+#5975 = CARTESIAN_POINT('',(7.777573805071E-03,-0.197928350198,+ 1.558931852983));+#5976 = CARTESIAN_POINT('',(7.268760565493E-05,-0.197928350198,+ 1.558931852983));+#5977 = ORIENTED_EDGE('',*,*,#5731,.F.);+#5978 = ORIENTED_EDGE('',*,*,#5979,.F.);+#5979 = EDGE_CURVE('',#5948,#5732,#5980,.T.);+#5980 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5981,#5982,#5983),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5981 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.552977284328));+#5982 = CARTESIAN_POINT('',(7.777573805071E-03,-0.197928350198,+ 1.552977284328));+#5983 = CARTESIAN_POINT('',(7.268760565493E-05,-0.197928350198,+ 1.552977284328));+#5984 = SURFACE_OF_LINEAR_EXTRUSION('',#5985,#5989);+#5985 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5986,#5987,#5988),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5986 = CARTESIAN_POINT('',(1.293839380657E-02,-0.192694842591,+ 1.552977284328));+#5987 = CARTESIAN_POINT('',(7.777573805071E-03,-0.197928350198,+ 1.552977284328));+#5988 = CARTESIAN_POINT('',(7.268760565493E-05,-0.197928350198,+ 1.552977284328));+#5989 = VECTOR('',#5990,1.);+#5990 = DIRECTION('',(-0.,-0.,-1.));+#5991 = ADVANCED_FACE('',(#5992),#6002,.F.);+#5992 = FACE_BOUND('',#5993,.T.);+#5993 = EDGE_LOOP('',(#5994,#5995,#5996,#5997,#5998,#5999,#6000,#6001));+#5994 = ORIENTED_EDGE('',*,*,#5757,.T.);+#5995 = ORIENTED_EDGE('',*,*,#5790,.T.);+#5996 = ORIENTED_EDGE('',*,*,#5823,.T.);+#5997 = ORIENTED_EDGE('',*,*,#5856,.T.);+#5998 = ORIENTED_EDGE('',*,*,#5889,.T.);+#5999 = ORIENTED_EDGE('',*,*,#5922,.T.);+#6000 = ORIENTED_EDGE('',*,*,#5955,.T.);+#6001 = ORIENTED_EDGE('',*,*,#5979,.T.);+#6002 = PLANE('',#6003);+#6003 = AXIS2_PLACEMENT_3D('',#6004,#6005,#6006);+#6004 = CARTESIAN_POINT('',(0.108377220031,-0.269452954163,+ 1.552977284328));+#6005 = DIRECTION('',(0.,0.,1.));+#6006 = DIRECTION('',(1.110223024625E-16,1.,0.));+#6007 = ADVANCED_FACE('',(#6008),#6018,.T.);+#6008 = FACE_BOUND('',#6009,.F.);+#6009 = EDGE_LOOP('',(#6010,#6011,#6012,#6013,#6014,#6015,#6016,#6017));+#6010 = ORIENTED_EDGE('',*,*,#5741,.T.);+#6011 = ORIENTED_EDGE('',*,*,#5774,.T.);+#6012 = ORIENTED_EDGE('',*,*,#5807,.T.);+#6013 = ORIENTED_EDGE('',*,*,#5840,.T.);+#6014 = ORIENTED_EDGE('',*,*,#5873,.T.);+#6015 = ORIENTED_EDGE('',*,*,#5906,.T.);+#6016 = ORIENTED_EDGE('',*,*,#5939,.T.);+#6017 = ORIENTED_EDGE('',*,*,#5972,.T.);+#6018 = PLANE('',#6019);+#6019 = AXIS2_PLACEMENT_3D('',#6020,#6021,#6022);+#6020 = CARTESIAN_POINT('',(0.108377220031,-0.269452954163,+ 1.558931852983));+#6021 = DIRECTION('',(0.,0.,1.));+#6022 = DIRECTION('',(1.110223024625E-16,1.,0.));+#6023 = MANIFOLD_SOLID_BREP('',#6024);+#6024 = CLOSED_SHELL('',(#6025,#6067,#6100,#6133,#6166,#6199,#6232,#6265+ ,#6289,#6331,#6364,#6397,#6430,#6463,#6496,#6529,#6553,#6579));+#6025 = ADVANCED_FACE('',(#6026),#6060,.T.);+#6026 = FACE_BOUND('',#6027,.T.);+#6027 = EDGE_LOOP('',(#6028,#6038,#6046,#6054));+#6028 = ORIENTED_EDGE('',*,*,#6029,.T.);+#6029 = EDGE_CURVE('',#6030,#6032,#6034,.T.);+#6030 = VERTEX_POINT('',#6031);+#6031 = CARTESIAN_POINT('',(7.268760565484E-05,-0.251571803171,+ 1.552977284328));+#6032 = VERTEX_POINT('',#6033);+#6033 = CARTESIAN_POINT('',(7.268760565484E-05,-0.251571803171,+ 1.558931852983));+#6034 = LINE('',#6035,#6036);+#6035 = CARTESIAN_POINT('',(7.268760565484E-05,-0.251571803171,+ 1.552977284328));+#6036 = VECTOR('',#6037,1.);+#6037 = DIRECTION('',(0.,0.,1.));+#6038 = ORIENTED_EDGE('',*,*,#6039,.T.);+#6039 = EDGE_CURVE('',#6032,#6040,#6042,.T.);+#6040 = VERTEX_POINT('',#6041);+#6041 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.558931852983));+#6042 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6043,#6044,#6045),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6043 = CARTESIAN_POINT('',(7.268760565493E-05,-0.251571803171,+ 1.558931852983));+#6044 = CARTESIAN_POINT('',(-5.633289438252E-02,-0.251571803171,+ 1.558931852983));+#6045 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.558931852983));+#6046 = ORIENTED_EDGE('',*,*,#6047,.F.);+#6047 = EDGE_CURVE('',#6048,#6040,#6050,.T.);+#6048 = VERTEX_POINT('',#6049);+#6049 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.552977284328));+#6050 = LINE('',#6051,#6052);+#6051 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.552977284328));+#6052 = VECTOR('',#6053,1.);+#6053 = DIRECTION('',(0.,0.,1.));+#6054 = ORIENTED_EDGE('',*,*,#6055,.F.);+#6055 = EDGE_CURVE('',#6030,#6048,#6056,.T.);+#6056 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6057,#6058,#6059),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6057 = CARTESIAN_POINT('',(7.268760565493E-05,-0.251571803171,+ 1.552977284328));+#6058 = CARTESIAN_POINT('',(-5.633289438252E-02,-0.251571803171,+ 1.552977284328));+#6059 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.552977284328));+#6060 = SURFACE_OF_LINEAR_EXTRUSION('',#6061,#6065);+#6061 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6062,#6063,#6064),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6062 = CARTESIAN_POINT('',(7.268760565493E-05,-0.251571803171,+ 1.552977284328));+#6063 = CARTESIAN_POINT('',(-5.633289438252E-02,-0.251571803171,+ 1.552977284328));+#6064 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.552977284328));+#6065 = VECTOR('',#6066,1.);+#6066 = DIRECTION('',(-0.,-0.,-1.));+#6067 = ADVANCED_FACE('',(#6068),#6093,.T.);+#6068 = FACE_BOUND('',#6069,.T.);+#6069 = EDGE_LOOP('',(#6070,#6071,#6079,#6087));+#6070 = ORIENTED_EDGE('',*,*,#6047,.T.);+#6071 = ORIENTED_EDGE('',*,*,#6072,.T.);+#6072 = EDGE_CURVE('',#6040,#6073,#6075,.T.);+#6073 = VERTEX_POINT('',#6074);+#6074 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.558931852983));+#6075 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6076,#6077,#6078),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6076 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.558931852983));+#6077 = CARTESIAN_POINT('',(-0.112593101159,-0.215809501189,+ 1.558931852983));+#6078 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.558931852983));+#6079 = ORIENTED_EDGE('',*,*,#6080,.F.);+#6080 = EDGE_CURVE('',#6081,#6073,#6083,.T.);+#6081 = VERTEX_POINT('',#6082);+#6082 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.552977284328));+#6083 = LINE('',#6084,#6085);+#6084 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.552977284328));+#6085 = VECTOR('',#6086,1.);+#6086 = DIRECTION('',(0.,0.,1.));+#6087 = ORIENTED_EDGE('',*,*,#6088,.F.);+#6088 = EDGE_CURVE('',#6048,#6081,#6089,.T.);+#6089 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6090,#6091,#6092),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6090 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.552977284328));+#6091 = CARTESIAN_POINT('',(-0.112593101159,-0.215809501189,+ 1.552977284328));+#6092 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.552977284328));+#6093 = SURFACE_OF_LINEAR_EXTRUSION('',#6094,#6098);+#6094 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6095,#6096,#6097),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6095 = CARTESIAN_POINT('',(-8.446299777095E-02,-0.23369065218,+ 1.552977284328));+#6096 = CARTESIAN_POINT('',(-0.112593101159,-0.215809501189,+ 1.552977284328));+#6097 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.552977284328));+#6098 = VECTOR('',#6099,1.);+#6099 = DIRECTION('',(-0.,-0.,-1.));+#6100 = ADVANCED_FACE('',(#6101),#6126,.T.);+#6101 = FACE_BOUND('',#6102,.T.);+#6102 = EDGE_LOOP('',(#6103,#6104,#6112,#6120));+#6103 = ORIENTED_EDGE('',*,*,#6080,.T.);+#6104 = ORIENTED_EDGE('',*,*,#6105,.T.);+#6105 = EDGE_CURVE('',#6073,#6106,#6108,.T.);+#6106 = VERTEX_POINT('',#6107);+#6107 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.558931852983));+#6108 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6109,#6110,#6111),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6109 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.558931852983));+#6110 = CARTESIAN_POINT('',(-0.112593101159,-0.143848771591,+ 1.558931852983));+#6111 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.558931852983));+#6112 = ORIENTED_EDGE('',*,*,#6113,.F.);+#6113 = EDGE_CURVE('',#6114,#6106,#6116,.T.);+#6114 = VERTEX_POINT('',#6115);+#6115 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6116 = LINE('',#6117,#6118);+#6117 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6118 = VECTOR('',#6119,1.);+#6119 = DIRECTION('',(0.,0.,1.));+#6120 = ORIENTED_EDGE('',*,*,#6121,.F.);+#6121 = EDGE_CURVE('',#6081,#6114,#6122,.T.);+#6122 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6123,#6124,#6125),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6123 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.552977284328));+#6124 = CARTESIAN_POINT('',(-0.112593101159,-0.143848771591,+ 1.552977284328));+#6125 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6126 = SURFACE_OF_LINEAR_EXTRUSION('',#6127,#6131);+#6127 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6128,#6129,#6130),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6128 = CARTESIAN_POINT('',(-0.112593101159,-0.179901823996,+ 1.552977284328));+#6129 = CARTESIAN_POINT('',(-0.112593101159,-0.143848771591,+ 1.552977284328));+#6130 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6131 = VECTOR('',#6132,1.);+#6132 = DIRECTION('',(-0.,-0.,-1.));+#6133 = ADVANCED_FACE('',(#6134),#6159,.T.);+#6134 = FACE_BOUND('',#6135,.T.);+#6135 = EDGE_LOOP('',(#6136,#6137,#6145,#6153));+#6136 = ORIENTED_EDGE('',*,*,#6113,.T.);+#6137 = ORIENTED_EDGE('',*,*,#6138,.T.);+#6138 = EDGE_CURVE('',#6106,#6139,#6141,.T.);+#6139 = VERTEX_POINT('',#6140);+#6140 = CARTESIAN_POINT('',(7.268760565485E-05,-0.108086469609,+ 1.558931852983));+#6141 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6142,#6143,#6144),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6142 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.558931852983));+#6143 = CARTESIAN_POINT('',(-5.647826959383E-02,-0.108086469609,+ 1.558931852983));+#6144 = CARTESIAN_POINT('',(7.268760565493E-05,-0.108086469609,+ 1.558931852983));+#6145 = ORIENTED_EDGE('',*,*,#6146,.F.);+#6146 = EDGE_CURVE('',#6147,#6139,#6149,.T.);+#6147 = VERTEX_POINT('',#6148);+#6148 = CARTESIAN_POINT('',(7.268760565485E-05,-0.108086469609,+ 1.552977284328));+#6149 = LINE('',#6150,#6151);+#6150 = CARTESIAN_POINT('',(7.268760565485E-05,-0.108086469609,+ 1.552977284328));+#6151 = VECTOR('',#6152,1.);+#6152 = DIRECTION('',(0.,0.,1.));+#6153 = ORIENTED_EDGE('',*,*,#6154,.F.);+#6154 = EDGE_CURVE('',#6114,#6147,#6155,.T.);+#6155 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6156,#6157,#6158),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6156 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6157 = CARTESIAN_POINT('',(-5.647826959383E-02,-0.108086469609,+ 1.552977284328));+#6158 = CARTESIAN_POINT('',(7.268760565493E-05,-0.108086469609,+ 1.552977284328));+#6159 = SURFACE_OF_LINEAR_EXTRUSION('',#6160,#6164);+#6160 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6161,#6162,#6163),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6161 = CARTESIAN_POINT('',(-8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6162 = CARTESIAN_POINT('',(-5.647826959383E-02,-0.108086469609,+ 1.552977284328));+#6163 = CARTESIAN_POINT('',(7.268760565493E-05,-0.108086469609,+ 1.552977284328));+#6164 = VECTOR('',#6165,1.);+#6165 = DIRECTION('',(-0.,-0.,-1.));+#6166 = ADVANCED_FACE('',(#6167),#6192,.T.);+#6167 = FACE_BOUND('',#6168,.T.);+#6168 = EDGE_LOOP('',(#6169,#6170,#6178,#6186));+#6169 = ORIENTED_EDGE('',*,*,#6146,.T.);+#6170 = ORIENTED_EDGE('',*,*,#6171,.T.);+#6171 = EDGE_CURVE('',#6139,#6172,#6174,.T.);+#6172 = VERTEX_POINT('',#6173);+#6173 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.558931852983));+#6174 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6175,#6176,#6177),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6175 = CARTESIAN_POINT('',(7.268760565493E-05,-0.108086469609,+ 1.558931852983));+#6176 = CARTESIAN_POINT('',(5.647826959383E-02,-0.108086469609,+ 1.558931852983));+#6177 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.558931852983));+#6178 = ORIENTED_EDGE('',*,*,#6179,.F.);+#6179 = EDGE_CURVE('',#6180,#6172,#6182,.T.);+#6180 = VERTEX_POINT('',#6181);+#6181 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6182 = LINE('',#6183,#6184);+#6183 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6184 = VECTOR('',#6185,1.);+#6185 = DIRECTION('',(0.,0.,1.));+#6186 = ORIENTED_EDGE('',*,*,#6187,.F.);+#6187 = EDGE_CURVE('',#6147,#6180,#6188,.T.);+#6188 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6189,#6190,#6191),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6189 = CARTESIAN_POINT('',(7.268760565493E-05,-0.108086469609,+ 1.552977284328));+#6190 = CARTESIAN_POINT('',(5.647826959383E-02,-0.108086469609,+ 1.552977284328));+#6191 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6192 = SURFACE_OF_LINEAR_EXTRUSION('',#6193,#6197);+#6193 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6194,#6195,#6196),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6194 = CARTESIAN_POINT('',(7.268760565493E-05,-0.108086469609,+ 1.552977284328));+#6195 = CARTESIAN_POINT('',(5.647826959383E-02,-0.108086469609,+ 1.552977284328));+#6196 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6197 = VECTOR('',#6198,1.);+#6198 = DIRECTION('',(-0.,-0.,-1.));+#6199 = ADVANCED_FACE('',(#6200),#6225,.T.);+#6200 = FACE_BOUND('',#6201,.T.);+#6201 = EDGE_LOOP('',(#6202,#6203,#6211,#6219));+#6202 = ORIENTED_EDGE('',*,*,#6179,.T.);+#6203 = ORIENTED_EDGE('',*,*,#6204,.T.);+#6204 = EDGE_CURVE('',#6172,#6205,#6207,.T.);+#6205 = VERTEX_POINT('',#6206);+#6206 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.558931852983));+#6207 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6208,#6209,#6210),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6208 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.558931852983));+#6209 = CARTESIAN_POINT('',(0.112593101159,-0.143848771591,+ 1.558931852983));+#6210 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.558931852983));+#6211 = ORIENTED_EDGE('',*,*,#6212,.F.);+#6212 = EDGE_CURVE('',#6213,#6205,#6215,.T.);+#6213 = VERTEX_POINT('',#6214);+#6214 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.552977284328));+#6215 = LINE('',#6216,#6217);+#6216 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.552977284328));+#6217 = VECTOR('',#6218,1.);+#6218 = DIRECTION('',(0.,0.,1.));+#6219 = ORIENTED_EDGE('',*,*,#6220,.F.);+#6220 = EDGE_CURVE('',#6180,#6213,#6221,.T.);+#6221 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6222,#6223,#6224),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6222 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6223 = CARTESIAN_POINT('',(0.112593101159,-0.143848771591,+ 1.552977284328));+#6224 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.552977284328));+#6225 = SURFACE_OF_LINEAR_EXTRUSION('',#6226,#6230);+#6226 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6227,#6228,#6229),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6227 = CARTESIAN_POINT('',(8.453568537661E-02,-0.1259676206,+ 1.552977284328));+#6228 = CARTESIAN_POINT('',(0.112593101159,-0.143848771591,+ 1.552977284328));+#6229 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.552977284328));+#6230 = VECTOR('',#6231,1.);+#6231 = DIRECTION('',(-0.,-0.,-1.));+#6232 = ADVANCED_FACE('',(#6233),#6258,.T.);+#6233 = FACE_BOUND('',#6234,.T.);+#6234 = EDGE_LOOP('',(#6235,#6236,#6244,#6252));+#6235 = ORIENTED_EDGE('',*,*,#6212,.T.);+#6236 = ORIENTED_EDGE('',*,*,#6237,.T.);+#6237 = EDGE_CURVE('',#6205,#6238,#6240,.T.);+#6238 = VERTEX_POINT('',#6239);+#6239 = CARTESIAN_POINT('',(8.446299777095E-02,-0.23369065218,+ 1.558931852983));+#6240 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6241,#6242,#6243),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6241 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.558931852983));+#6242 = CARTESIAN_POINT('',(0.112593101159,-0.215809501189,+ 1.558931852983));+#6243 = CARTESIAN_POINT('',(8.446299777096E-02,-0.23369065218,+ 1.558931852983));+#6244 = ORIENTED_EDGE('',*,*,#6245,.F.);+#6245 = EDGE_CURVE('',#6246,#6238,#6248,.T.);+#6246 = VERTEX_POINT('',#6247);+#6247 = CARTESIAN_POINT('',(8.446299777095E-02,-0.23369065218,+ 1.552977284328));+#6248 = LINE('',#6249,#6250);+#6249 = CARTESIAN_POINT('',(8.446299777095E-02,-0.23369065218,+ 1.552977284328));+#6250 = VECTOR('',#6251,1.);+#6251 = DIRECTION('',(0.,0.,1.));+#6252 = ORIENTED_EDGE('',*,*,#6253,.F.);+#6253 = EDGE_CURVE('',#6213,#6246,#6254,.T.);+#6254 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6255,#6256,#6257),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6255 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.552977284328));+#6256 = CARTESIAN_POINT('',(0.112593101159,-0.215809501189,+ 1.552977284328));+#6257 = CARTESIAN_POINT('',(8.446299777096E-02,-0.23369065218,+ 1.552977284328));+#6258 = SURFACE_OF_LINEAR_EXTRUSION('',#6259,#6263);+#6259 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6260,#6261,#6262),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6260 = CARTESIAN_POINT('',(0.112593101159,-0.179901823996,+ 1.552977284328));+#6261 = CARTESIAN_POINT('',(0.112593101159,-0.215809501189,+ 1.552977284328));+#6262 = CARTESIAN_POINT('',(8.446299777096E-02,-0.23369065218,+ 1.552977284328));+#6263 = VECTOR('',#6264,1.);+#6264 = DIRECTION('',(-0.,-0.,-1.));+#6265 = ADVANCED_FACE('',(#6266),#6282,.T.);+#6266 = FACE_BOUND('',#6267,.T.);+#6267 = EDGE_LOOP('',(#6268,#6269,#6275,#6276));+#6268 = ORIENTED_EDGE('',*,*,#6245,.T.);+#6269 = ORIENTED_EDGE('',*,*,#6270,.T.);+#6270 = EDGE_CURVE('',#6238,#6032,#6271,.T.);+#6271 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6272,#6273,#6274),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6272 = CARTESIAN_POINT('',(8.446299777096E-02,-0.23369065218,+ 1.558931852983));+#6273 = CARTESIAN_POINT('',(5.633289438252E-02,-0.251571803171,+ 1.558931852983));+#6274 = CARTESIAN_POINT('',(7.268760565493E-05,-0.251571803171,+ 1.558931852983));+#6275 = ORIENTED_EDGE('',*,*,#6029,.F.);+#6276 = ORIENTED_EDGE('',*,*,#6277,.F.);+#6277 = EDGE_CURVE('',#6246,#6030,#6278,.T.);+#6278 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6279,#6280,#6281),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6279 = CARTESIAN_POINT('',(8.446299777096E-02,-0.23369065218,+ 1.552977284328));+#6280 = CARTESIAN_POINT('',(5.633289438252E-02,-0.251571803171,+ 1.552977284328));+#6281 = CARTESIAN_POINT('',(7.268760565493E-05,-0.251571803171,+ 1.552977284328));+#6282 = SURFACE_OF_LINEAR_EXTRUSION('',#6283,#6287);+#6283 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6284,#6285,#6286),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6284 = CARTESIAN_POINT('',(8.446299777096E-02,-0.23369065218,+ 1.552977284328));+#6285 = CARTESIAN_POINT('',(5.633289438252E-02,-0.251571803171,+ 1.552977284328));+#6286 = CARTESIAN_POINT('',(7.268760565493E-05,-0.251571803171,+ 1.552977284328));+#6287 = VECTOR('',#6288,1.);+#6288 = DIRECTION('',(-0.,-0.,-1.));+#6289 = ADVANCED_FACE('',(#6290),#6324,.T.);+#6290 = FACE_BOUND('',#6291,.T.);+#6291 = EDGE_LOOP('',(#6292,#6302,#6310,#6318));+#6292 = ORIENTED_EDGE('',*,*,#6293,.T.);+#6293 = EDGE_CURVE('',#6294,#6296,#6298,.T.);+#6294 = VERTEX_POINT('',#6295);+#6295 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6296 = VERTEX_POINT('',#6297);+#6297 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.558931852983));+#6298 = LINE('',#6299,#6300);+#6299 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6300 = VECTOR('',#6301,1.);+#6301 = DIRECTION('',(0.,0.,1.));+#6302 = ORIENTED_EDGE('',*,*,#6303,.T.);+#6303 = EDGE_CURVE('',#6296,#6304,#6306,.T.);+#6304 = VERTEX_POINT('',#6305);+#6305 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.558931852983));+#6306 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6307,#6308,#6309),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6307 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.558931852983));+#6308 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.194730095549,+ 1.558931852983));+#6309 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.558931852983));+#6310 = ORIENTED_EDGE('',*,*,#6311,.F.);+#6311 = EDGE_CURVE('',#6312,#6304,#6314,.T.);+#6312 = VERTEX_POINT('',#6313);+#6313 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6314 = LINE('',#6315,#6316);+#6315 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6316 = VECTOR('',#6317,1.);+#6317 = DIRECTION('',(0.,0.,1.));+#6318 = ORIENTED_EDGE('',*,*,#6319,.F.);+#6319 = EDGE_CURVE('',#6294,#6312,#6320,.T.);+#6320 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6321,#6322,#6323),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6321 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6322 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.194730095549,+ 1.552977284328));+#6323 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6324 = SURFACE_OF_LINEAR_EXTRUSION('',#6325,#6329);+#6325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6326,#6327,#6328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6326 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6327 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.194730095549,+ 1.552977284328));+#6328 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6329 = VECTOR('',#6330,1.);+#6330 = DIRECTION('',(-0.,-0.,-1.));+#6331 = ADVANCED_FACE('',(#6332),#6357,.T.);+#6332 = FACE_BOUND('',#6333,.T.);+#6333 = EDGE_LOOP('',(#6334,#6335,#6343,#6351));+#6334 = ORIENTED_EDGE('',*,*,#6311,.T.);+#6335 = ORIENTED_EDGE('',*,*,#6336,.T.);+#6336 = EDGE_CURVE('',#6304,#6337,#6339,.T.);+#6337 = VERTEX_POINT('',#6338);+#6338 = CARTESIAN_POINT('',(7.268760565484E-05,-0.208395365413,+ 1.558931852983));+#6339 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6340,#6341,#6342),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6340 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.558931852983));+#6341 = CARTESIAN_POINT('',(-3.990549550452E-02,-0.208395365413,+ 1.558931852983));+#6342 = CARTESIAN_POINT('',(7.268760565493E-05,-0.208395365413,+ 1.558931852983));+#6343 = ORIENTED_EDGE('',*,*,#6344,.F.);+#6344 = EDGE_CURVE('',#6345,#6337,#6347,.T.);+#6345 = VERTEX_POINT('',#6346);+#6346 = CARTESIAN_POINT('',(7.268760565484E-05,-0.208395365413,+ 1.552977284328));+#6347 = LINE('',#6348,#6349);+#6348 = CARTESIAN_POINT('',(7.268760565484E-05,-0.208395365413,+ 1.552977284328));+#6349 = VECTOR('',#6350,1.);+#6350 = DIRECTION('',(0.,0.,1.));+#6351 = ORIENTED_EDGE('',*,*,#6352,.F.);+#6352 = EDGE_CURVE('',#6312,#6345,#6353,.T.);+#6353 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6354,#6355,#6356),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6354 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6355 = CARTESIAN_POINT('',(-3.990549550452E-02,-0.208395365413,+ 1.552977284328));+#6356 = CARTESIAN_POINT('',(7.268760565493E-05,-0.208395365413,+ 1.552977284328));+#6357 = SURFACE_OF_LINEAR_EXTRUSION('',#6358,#6362);+#6358 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6359,#6360,#6361),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6359 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6360 = CARTESIAN_POINT('',(-3.990549550452E-02,-0.208395365413,+ 1.552977284328));+#6361 = CARTESIAN_POINT('',(7.268760565493E-05,-0.208395365413,+ 1.552977284328));+#6362 = VECTOR('',#6363,1.);+#6363 = DIRECTION('',(-0.,-0.,-1.));+#6364 = ADVANCED_FACE('',(#6365),#6390,.T.);+#6365 = FACE_BOUND('',#6366,.T.);+#6366 = EDGE_LOOP('',(#6367,#6368,#6376,#6384));+#6367 = ORIENTED_EDGE('',*,*,#6344,.T.);+#6368 = ORIENTED_EDGE('',*,*,#6369,.T.);+#6369 = EDGE_CURVE('',#6337,#6370,#6372,.T.);+#6370 = VERTEX_POINT('',#6371);+#6371 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.558931852983));+#6372 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6373,#6374,#6375),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6373 = CARTESIAN_POINT('',(7.268760565493E-05,-0.208395365413,+ 1.558931852983));+#6374 = CARTESIAN_POINT('',(3.990549550452E-02,-0.208395365413,+ 1.558931852983));+#6375 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.558931852983));+#6376 = ORIENTED_EDGE('',*,*,#6377,.F.);+#6377 = EDGE_CURVE('',#6378,#6370,#6380,.T.);+#6378 = VERTEX_POINT('',#6379);+#6379 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6380 = LINE('',#6381,#6382);+#6381 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6382 = VECTOR('',#6383,1.);+#6383 = DIRECTION('',(0.,0.,1.));+#6384 = ORIENTED_EDGE('',*,*,#6385,.F.);+#6385 = EDGE_CURVE('',#6345,#6378,#6386,.T.);+#6386 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6387,#6388,#6389),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6387 = CARTESIAN_POINT('',(7.268760565493E-05,-0.208395365413,+ 1.552977284328));+#6388 = CARTESIAN_POINT('',(3.990549550452E-02,-0.208395365413,+ 1.552977284328));+#6389 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6390 = SURFACE_OF_LINEAR_EXTRUSION('',#6391,#6395);+#6391 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6392,#6393,#6394),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6392 = CARTESIAN_POINT('',(7.268760565493E-05,-0.208395365413,+ 1.552977284328));+#6393 = CARTESIAN_POINT('',(3.990549550452E-02,-0.208395365413,+ 1.552977284328));+#6394 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6395 = VECTOR('',#6396,1.);+#6396 = DIRECTION('',(-0.,-0.,-1.));+#6397 = ADVANCED_FACE('',(#6398),#6423,.T.);+#6398 = FACE_BOUND('',#6399,.T.);+#6399 = EDGE_LOOP('',(#6400,#6401,#6409,#6417));+#6400 = ORIENTED_EDGE('',*,*,#6377,.T.);+#6401 = ORIENTED_EDGE('',*,*,#6402,.T.);+#6402 = EDGE_CURVE('',#6370,#6403,#6405,.T.);+#6403 = VERTEX_POINT('',#6404);+#6404 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.558931852983));+#6405 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6406,#6407,#6408),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6406 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.558931852983));+#6407 = CARTESIAN_POINT('',(7.624929833195E-02,-0.194730095549,+ 1.558931852983));+#6408 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.558931852983));+#6409 = ORIENTED_EDGE('',*,*,#6410,.F.);+#6410 = EDGE_CURVE('',#6411,#6403,#6413,.T.);+#6411 = VERTEX_POINT('',#6412);+#6412 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6413 = LINE('',#6414,#6415);+#6414 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6415 = VECTOR('',#6416,1.);+#6416 = DIRECTION('',(0.,0.,1.));+#6417 = ORIENTED_EDGE('',*,*,#6418,.F.);+#6418 = EDGE_CURVE('',#6378,#6411,#6419,.T.);+#6419 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6420,#6421,#6422),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6420 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6421 = CARTESIAN_POINT('',(7.624929833195E-02,-0.194730095549,+ 1.552977284328));+#6422 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6423 = SURFACE_OF_LINEAR_EXTRUSION('',#6424,#6428);+#6424 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6425,#6426,#6427),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6425 = CARTESIAN_POINT('',(5.807739691824E-02,-0.201562730481,+ 1.552977284328));+#6426 = CARTESIAN_POINT('',(7.624929833195E-02,-0.194730095549,+ 1.552977284328));+#6427 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6428 = VECTOR('',#6429,1.);+#6429 = DIRECTION('',(-0.,-0.,-1.));+#6430 = ADVANCED_FACE('',(#6431),#6456,.T.);+#6431 = FACE_BOUND('',#6432,.T.);+#6432 = EDGE_LOOP('',(#6433,#6434,#6442,#6450));+#6433 = ORIENTED_EDGE('',*,*,#6410,.T.);+#6434 = ORIENTED_EDGE('',*,*,#6435,.T.);+#6435 = EDGE_CURVE('',#6403,#6436,#6438,.T.);+#6436 = VERTEX_POINT('',#6437);+#6437 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.558931852983));+#6438 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6439,#6440,#6441),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6439 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.558931852983));+#6440 = CARTESIAN_POINT('',(7.624929833195E-02,-0.164928177231,+ 1.558931852983));+#6441 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.558931852983));+#6442 = ORIENTED_EDGE('',*,*,#6443,.F.);+#6443 = EDGE_CURVE('',#6444,#6436,#6446,.T.);+#6444 = VERTEX_POINT('',#6445);+#6445 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6446 = LINE('',#6447,#6448);+#6447 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6448 = VECTOR('',#6449,1.);+#6449 = DIRECTION('',(0.,0.,1.));+#6450 = ORIENTED_EDGE('',*,*,#6451,.F.);+#6451 = EDGE_CURVE('',#6411,#6444,#6452,.T.);+#6452 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6453,#6454,#6455),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6453 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6454 = CARTESIAN_POINT('',(7.624929833195E-02,-0.164928177231,+ 1.552977284328));+#6455 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6456 = SURFACE_OF_LINEAR_EXTRUSION('',#6457,#6461);+#6457 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6458,#6459,#6460),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6458 = CARTESIAN_POINT('',(7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6459 = CARTESIAN_POINT('',(7.624929833195E-02,-0.164928177231,+ 1.552977284328));+#6460 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6461 = VECTOR('',#6462,1.);+#6462 = DIRECTION('',(-0.,-0.,-1.));+#6463 = ADVANCED_FACE('',(#6464),#6489,.T.);+#6464 = FACE_BOUND('',#6465,.T.);+#6465 = EDGE_LOOP('',(#6466,#6467,#6475,#6483));+#6466 = ORIENTED_EDGE('',*,*,#6443,.T.);+#6467 = ORIENTED_EDGE('',*,*,#6468,.T.);+#6468 = EDGE_CURVE('',#6436,#6469,#6471,.T.);+#6469 = VERTEX_POINT('',#6470);+#6470 = CARTESIAN_POINT('',(7.268760565485E-05,-0.151262907368,+ 1.558931852983));+#6471 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6472,#6473,#6474),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6472 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.558931852983));+#6473 = CARTESIAN_POINT('',(3.990549550452E-02,-0.151262907368,+ 1.558931852983));+#6474 = CARTESIAN_POINT('',(7.268760565493E-05,-0.151262907368,+ 1.558931852983));+#6475 = ORIENTED_EDGE('',*,*,#6476,.F.);+#6476 = EDGE_CURVE('',#6477,#6469,#6479,.T.);+#6477 = VERTEX_POINT('',#6478);+#6478 = CARTESIAN_POINT('',(7.268760565485E-05,-0.151262907368,+ 1.552977284328));+#6479 = LINE('',#6480,#6481);+#6480 = CARTESIAN_POINT('',(7.268760565485E-05,-0.151262907368,+ 1.552977284328));+#6481 = VECTOR('',#6482,1.);+#6482 = DIRECTION('',(0.,0.,1.));+#6483 = ORIENTED_EDGE('',*,*,#6484,.F.);+#6484 = EDGE_CURVE('',#6444,#6477,#6485,.T.);+#6485 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6486,#6487,#6488),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6486 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6487 = CARTESIAN_POINT('',(3.990549550452E-02,-0.151262907368,+ 1.552977284328));+#6488 = CARTESIAN_POINT('',(7.268760565493E-05,-0.151262907368,+ 1.552977284328));+#6489 = SURFACE_OF_LINEAR_EXTRUSION('',#6490,#6494);+#6490 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6491,#6492,#6493),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6491 = CARTESIAN_POINT('',(5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6492 = CARTESIAN_POINT('',(3.990549550452E-02,-0.151262907368,+ 1.552977284328));+#6493 = CARTESIAN_POINT('',(7.268760565493E-05,-0.151262907368,+ 1.552977284328));+#6494 = VECTOR('',#6495,1.);+#6495 = DIRECTION('',(-0.,-0.,-1.));+#6496 = ADVANCED_FACE('',(#6497),#6522,.T.);+#6497 = FACE_BOUND('',#6498,.T.);+#6498 = EDGE_LOOP('',(#6499,#6500,#6508,#6516));+#6499 = ORIENTED_EDGE('',*,*,#6476,.T.);+#6500 = ORIENTED_EDGE('',*,*,#6501,.T.);+#6501 = EDGE_CURVE('',#6469,#6502,#6504,.T.);+#6502 = VERTEX_POINT('',#6503);+#6503 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.558931852983));+#6504 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6505,#6506,#6507),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6505 = CARTESIAN_POINT('',(7.268760565493E-05,-0.151262907368,+ 1.558931852983));+#6506 = CARTESIAN_POINT('',(-3.990549550452E-02,-0.151262907368,+ 1.558931852983));+#6507 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.558931852983));+#6508 = ORIENTED_EDGE('',*,*,#6509,.F.);+#6509 = EDGE_CURVE('',#6510,#6502,#6512,.T.);+#6510 = VERTEX_POINT('',#6511);+#6511 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6512 = LINE('',#6513,#6514);+#6513 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6514 = VECTOR('',#6515,1.);+#6515 = DIRECTION('',(0.,0.,1.));+#6516 = ORIENTED_EDGE('',*,*,#6517,.F.);+#6517 = EDGE_CURVE('',#6477,#6510,#6518,.T.);+#6518 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6519,#6520,#6521),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6519 = CARTESIAN_POINT('',(7.268760565493E-05,-0.151262907368,+ 1.552977284328));+#6520 = CARTESIAN_POINT('',(-3.990549550452E-02,-0.151262907368,+ 1.552977284328));+#6521 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6522 = SURFACE_OF_LINEAR_EXTRUSION('',#6523,#6527);+#6523 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6524,#6525,#6526),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6524 = CARTESIAN_POINT('',(7.268760565493E-05,-0.151262907368,+ 1.552977284328));+#6525 = CARTESIAN_POINT('',(-3.990549550452E-02,-0.151262907368,+ 1.552977284328));+#6526 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6527 = VECTOR('',#6528,1.);+#6528 = DIRECTION('',(-0.,-0.,-1.));+#6529 = ADVANCED_FACE('',(#6530),#6546,.T.);+#6530 = FACE_BOUND('',#6531,.T.);+#6531 = EDGE_LOOP('',(#6532,#6533,#6539,#6540));+#6532 = ORIENTED_EDGE('',*,*,#6509,.T.);+#6533 = ORIENTED_EDGE('',*,*,#6534,.T.);+#6534 = EDGE_CURVE('',#6502,#6296,#6535,.T.);+#6535 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6536,#6537,#6538),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6536 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.558931852983));+#6537 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.164928177231,+ 1.558931852983));+#6538 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.558931852983));+#6539 = ORIENTED_EDGE('',*,*,#6293,.F.);+#6540 = ORIENTED_EDGE('',*,*,#6541,.F.);+#6541 = EDGE_CURVE('',#6510,#6294,#6542,.T.);+#6542 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6543,#6544,#6545),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6543 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6544 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.164928177231,+ 1.552977284328));+#6545 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6546 = SURFACE_OF_LINEAR_EXTRUSION('',#6547,#6551);+#6547 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6548,#6549,#6550),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6548 = CARTESIAN_POINT('',(-5.807739691824E-02,-0.158095542299,+ 1.552977284328));+#6549 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.164928177231,+ 1.552977284328));+#6550 = CARTESIAN_POINT('',(-7.624929833195E-02,-0.179901823996,+ 1.552977284328));+#6551 = VECTOR('',#6552,1.);+#6552 = DIRECTION('',(-0.,-0.,-1.));+#6553 = ADVANCED_FACE('',(#6554,#6564),#6574,.F.);+#6554 = FACE_BOUND('',#6555,.T.);+#6555 = EDGE_LOOP('',(#6556,#6557,#6558,#6559,#6560,#6561,#6562,#6563));+#6556 = ORIENTED_EDGE('',*,*,#6055,.T.);+#6557 = ORIENTED_EDGE('',*,*,#6088,.T.);+#6558 = ORIENTED_EDGE('',*,*,#6121,.T.);+#6559 = ORIENTED_EDGE('',*,*,#6154,.T.);+#6560 = ORIENTED_EDGE('',*,*,#6187,.T.);+#6561 = ORIENTED_EDGE('',*,*,#6220,.T.);+#6562 = ORIENTED_EDGE('',*,*,#6253,.T.);+#6563 = ORIENTED_EDGE('',*,*,#6277,.T.);+#6564 = FACE_BOUND('',#6565,.T.);+#6565 = EDGE_LOOP('',(#6566,#6567,#6568,#6569,#6570,#6571,#6572,#6573));+#6566 = ORIENTED_EDGE('',*,*,#6319,.T.);+#6567 = ORIENTED_EDGE('',*,*,#6352,.T.);+#6568 = ORIENTED_EDGE('',*,*,#6385,.T.);+#6569 = ORIENTED_EDGE('',*,*,#6418,.T.);+#6570 = ORIENTED_EDGE('',*,*,#6451,.T.);+#6571 = ORIENTED_EDGE('',*,*,#6484,.T.);+#6572 = ORIENTED_EDGE('',*,*,#6517,.T.);+#6573 = ORIENTED_EDGE('',*,*,#6541,.T.);+#6574 = PLANE('',#6575);+#6575 = AXIS2_PLACEMENT_3D('',#6576,#6577,#6578);+#6576 = CARTESIAN_POINT('',(0.108377220031,-0.269452954163,+ 1.552977284328));+#6577 = DIRECTION('',(0.,0.,1.));+#6578 = DIRECTION('',(1.110223024625E-16,1.,0.));+#6579 = ADVANCED_FACE('',(#6580,#6590),#6600,.T.);+#6580 = FACE_BOUND('',#6581,.F.);+#6581 = EDGE_LOOP('',(#6582,#6583,#6584,#6585,#6586,#6587,#6588,#6589));+#6582 = ORIENTED_EDGE('',*,*,#6039,.T.);+#6583 = ORIENTED_EDGE('',*,*,#6072,.T.);+#6584 = ORIENTED_EDGE('',*,*,#6105,.T.);+#6585 = ORIENTED_EDGE('',*,*,#6138,.T.);+#6586 = ORIENTED_EDGE('',*,*,#6171,.T.);+#6587 = ORIENTED_EDGE('',*,*,#6204,.T.);+#6588 = ORIENTED_EDGE('',*,*,#6237,.T.);+#6589 = ORIENTED_EDGE('',*,*,#6270,.T.);+#6590 = FACE_BOUND('',#6591,.F.);+#6591 = EDGE_LOOP('',(#6592,#6593,#6594,#6595,#6596,#6597,#6598,#6599));+#6592 = ORIENTED_EDGE('',*,*,#6303,.T.);+#6593 = ORIENTED_EDGE('',*,*,#6336,.T.);+#6594 = ORIENTED_EDGE('',*,*,#6369,.T.);+#6595 = ORIENTED_EDGE('',*,*,#6402,.T.);+#6596 = ORIENTED_EDGE('',*,*,#6435,.T.);+#6597 = ORIENTED_EDGE('',*,*,#6468,.T.);+#6598 = ORIENTED_EDGE('',*,*,#6501,.T.);+#6599 = ORIENTED_EDGE('',*,*,#6534,.T.);+#6600 = PLANE('',#6601);+#6601 = AXIS2_PLACEMENT_3D('',#6602,#6603,#6604);+#6602 = CARTESIAN_POINT('',(0.108377220031,-0.269452954163,+ 1.558931852983));+#6603 = DIRECTION('',(0.,0.,1.));+#6604 = DIRECTION('',(1.110223024625E-16,1.,0.));+#6605 = MANIFOLD_SOLID_BREP('',#6606);+#6606 = CLOSED_SHELL('',(#6607,#6649,#6682,#6715,#6748,#6781,#6814,#6847+ ,#6871,#6887));+#6607 = ADVANCED_FACE('',(#6608),#6642,.T.);+#6608 = FACE_BOUND('',#6609,.T.);+#6609 = EDGE_LOOP('',(#6610,#6620,#6628,#6636));+#6610 = ORIENTED_EDGE('',*,*,#6611,.T.);+#6611 = EDGE_CURVE('',#6612,#6614,#6616,.T.);+#6612 = VERTEX_POINT('',#6613);+#6613 = CARTESIAN_POINT('',(7.268760565486E-05,-1.86807146533E-02,+ 1.552977284328));+#6614 = VERTEX_POINT('',#6615);+#6615 = CARTESIAN_POINT('',(7.268760565486E-05,-1.86807146533E-02,+ 1.558931852983));+#6616 = LINE('',#6617,#6618);+#6617 = CARTESIAN_POINT('',(7.268760565486E-05,-1.86807146533E-02,+ 1.552977284328));+#6618 = VECTOR('',#6619,1.);+#6619 = DIRECTION('',(0.,0.,1.));+#6620 = ORIENTED_EDGE('',*,*,#6621,.T.);+#6621 = EDGE_CURVE('',#6614,#6622,#6624,.T.);+#6622 = VERTEX_POINT('',#6623);+#6623 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.558931852983));+#6624 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6625,#6626,#6627),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6625 = CARTESIAN_POINT('',(7.268760565493E-05,-1.86807146533E-02,+ 1.558931852983));+#6626 = CARTESIAN_POINT('',(-7.632198593761E-03,-1.86807146533E-02,+ 1.558931852983));+#6627 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.558931852983));+#6628 = ORIENTED_EDGE('',*,*,#6629,.F.);+#6629 = EDGE_CURVE('',#6630,#6622,#6632,.T.);+#6630 = VERTEX_POINT('',#6631);+#6631 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.552977284328));+#6632 = LINE('',#6633,#6634);+#6633 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.552977284328));+#6634 = VECTOR('',#6635,1.);+#6635 = DIRECTION('',(0.,0.,1.));+#6636 = ORIENTED_EDGE('',*,*,#6637,.F.);+#6637 = EDGE_CURVE('',#6612,#6630,#6638,.T.);+#6638 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6639,#6640,#6641),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6639 = CARTESIAN_POINT('',(7.268760565493E-05,-1.86807146533E-02,+ 1.552977284328));+#6640 = CARTESIAN_POINT('',(-7.632198593761E-03,-1.86807146533E-02,+ 1.552977284328));+#6641 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.552977284328));+#6642 = SURFACE_OF_LINEAR_EXTRUSION('',#6643,#6647);+#6643 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6644,#6645,#6646),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6644 = CARTESIAN_POINT('',(7.268760565493E-05,-1.86807146533E-02,+ 1.552977284328));+#6645 = CARTESIAN_POINT('',(-7.632198593761E-03,-1.86807146533E-02,+ 1.552977284328));+#6646 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.552977284328));+#6647 = VECTOR('',#6648,1.);+#6648 = DIRECTION('',(-0.,-0.,-1.));+#6649 = ADVANCED_FACE('',(#6650),#6675,.T.);+#6650 = FACE_BOUND('',#6651,.T.);+#6651 = EDGE_LOOP('',(#6652,#6653,#6661,#6669));+#6652 = ORIENTED_EDGE('',*,*,#6629,.T.);+#6653 = ORIENTED_EDGE('',*,*,#6654,.T.);+#6654 = EDGE_CURVE('',#6622,#6655,#6657,.T.);+#6655 = VERTEX_POINT('',#6656);+#6656 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508938E-04,+ 1.558931852983));+#6657 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6658,#6659,#6660),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6658 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.558931852983));+#6659 = CARTESIAN_POINT('',(-1.809921380806E-02,-8.213699439E-03,+ 1.558931852983));+#6660 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508944E-04,+ 1.558931852983));+#6661 = ORIENTED_EDGE('',*,*,#6662,.F.);+#6662 = EDGE_CURVE('',#6663,#6655,#6665,.T.);+#6663 = VERTEX_POINT('',#6664);+#6664 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508938E-04,+ 1.552977284328));+#6665 = LINE('',#6666,#6667);+#6666 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508938E-04,+ 1.552977284328));+#6667 = VECTOR('',#6668,1.);+#6668 = DIRECTION('',(0.,0.,1.));+#6669 = ORIENTED_EDGE('',*,*,#6670,.F.);+#6670 = EDGE_CURVE('',#6630,#6663,#6671,.T.);+#6671 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6672,#6673,#6674),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6672 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.552977284328));+#6673 = CARTESIAN_POINT('',(-1.809921380806E-02,-8.213699439E-03,+ 1.552977284328));+#6674 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508944E-04,+ 1.552977284328));+#6675 = SURFACE_OF_LINEAR_EXTRUSION('',#6676,#6680);+#6676 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6677,#6678,#6679),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6677 = CARTESIAN_POINT('',(-1.286570620091E-02,-1.344720704615E-02,+ 1.552977284328));+#6678 = CARTESIAN_POINT('',(-1.809921380806E-02,-8.213699439E-03,+ 1.552977284328));+#6679 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508944E-04,+ 1.552977284328));+#6680 = VECTOR('',#6681,1.);+#6681 = DIRECTION('',(-0.,-0.,-1.));+#6682 = ADVANCED_FACE('',(#6683),#6708,.T.);+#6683 = FACE_BOUND('',#6684,.T.);+#6684 = EDGE_LOOP('',(#6685,#6686,#6694,#6702));+#6685 = ORIENTED_EDGE('',*,*,#6662,.T.);+#6686 = ORIENTED_EDGE('',*,*,#6687,.T.);+#6687 = EDGE_CURVE('',#6655,#6688,#6690,.T.);+#6688 = VERTEX_POINT('',#6689);+#6689 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.558931852983));+#6690 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6691,#6692,#6693),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6691 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508944E-04,+ 1.558931852983));+#6692 = CARTESIAN_POINT('',(-1.809921380806E-02,7.050697748522E-03,+ 1.558931852983));+#6693 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.558931852983));+#6694 = ORIENTED_EDGE('',*,*,#6695,.F.);+#6695 = EDGE_CURVE('',#6696,#6688,#6698,.T.);+#6696 = VERTEX_POINT('',#6697);+#6697 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6698 = LINE('',#6699,#6700);+#6699 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6700 = VECTOR('',#6701,1.);+#6701 = DIRECTION('',(0.,0.,1.));+#6702 = ORIENTED_EDGE('',*,*,#6703,.F.);+#6703 = EDGE_CURVE('',#6663,#6696,#6704,.T.);+#6704 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6705,#6706,#6707),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6705 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508944E-04,+ 1.552977284328));+#6706 = CARTESIAN_POINT('',(-1.809921380806E-02,7.050697748522E-03,+ 1.552977284328));+#6707 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6708 = SURFACE_OF_LINEAR_EXTRUSION('',#6709,#6713);+#6709 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6710,#6711,#6712),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6710 = CARTESIAN_POINT('',(-1.809921380806E-02,-6.541884508944E-04,+ 1.552977284328));+#6711 = CARTESIAN_POINT('',(-1.809921380806E-02,7.050697748522E-03,+ 1.552977284328));+#6712 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6713 = VECTOR('',#6714,1.);+#6714 = DIRECTION('',(-0.,-0.,-1.));+#6715 = ADVANCED_FACE('',(#6716),#6741,.T.);+#6716 = FACE_BOUND('',#6717,.T.);+#6717 = EDGE_LOOP('',(#6718,#6719,#6727,#6735));+#6718 = ORIENTED_EDGE('',*,*,#6695,.T.);+#6719 = ORIENTED_EDGE('',*,*,#6720,.T.);+#6720 = EDGE_CURVE('',#6688,#6721,#6723,.T.);+#6721 = VERTEX_POINT('',#6722);+#6722 = CARTESIAN_POINT('',(7.268760565487E-05,1.751771296282E-02,+ 1.558931852983));+#6723 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6724,#6725,#6726),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6724 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.558931852983));+#6725 = CARTESIAN_POINT('',(-7.632198593761E-03,1.751771296282E-02,+ 1.558931852983));+#6726 = CARTESIAN_POINT('',(7.268760565493E-05,1.751771296282E-02,+ 1.558931852983));+#6727 = ORIENTED_EDGE('',*,*,#6728,.F.);+#6728 = EDGE_CURVE('',#6729,#6721,#6731,.T.);+#6729 = VERTEX_POINT('',#6730);+#6730 = CARTESIAN_POINT('',(7.268760565487E-05,1.751771296282E-02,+ 1.552977284328));+#6731 = LINE('',#6732,#6733);+#6732 = CARTESIAN_POINT('',(7.268760565487E-05,1.751771296282E-02,+ 1.552977284328));+#6733 = VECTOR('',#6734,1.);+#6734 = DIRECTION('',(0.,0.,1.));+#6735 = ORIENTED_EDGE('',*,*,#6736,.F.);+#6736 = EDGE_CURVE('',#6696,#6729,#6737,.T.);+#6737 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6738,#6739,#6740),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6738 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6739 = CARTESIAN_POINT('',(-7.632198593761E-03,1.751771296282E-02,+ 1.552977284328));+#6740 = CARTESIAN_POINT('',(7.268760565493E-05,1.751771296282E-02,+ 1.552977284328));+#6741 = SURFACE_OF_LINEAR_EXTRUSION('',#6742,#6746);+#6742 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6743,#6744,#6745),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6743 = CARTESIAN_POINT('',(-1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6744 = CARTESIAN_POINT('',(-7.632198593761E-03,1.751771296282E-02,+ 1.552977284328));+#6745 = CARTESIAN_POINT('',(7.268760565493E-05,1.751771296282E-02,+ 1.552977284328));+#6746 = VECTOR('',#6747,1.);+#6747 = DIRECTION('',(-0.,-0.,-1.));+#6748 = ADVANCED_FACE('',(#6749),#6774,.T.);+#6749 = FACE_BOUND('',#6750,.T.);+#6750 = EDGE_LOOP('',(#6751,#6752,#6760,#6768));+#6751 = ORIENTED_EDGE('',*,*,#6728,.T.);+#6752 = ORIENTED_EDGE('',*,*,#6753,.T.);+#6753 = EDGE_CURVE('',#6721,#6754,#6756,.T.);+#6754 = VERTEX_POINT('',#6755);+#6755 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.558931852983));+#6756 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6757,#6758,#6759),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6757 = CARTESIAN_POINT('',(7.268760565493E-05,1.751771296282E-02,+ 1.558931852983));+#6758 = CARTESIAN_POINT('',(7.632198593761E-03,1.751771296282E-02,+ 1.558931852983));+#6759 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.558931852983));+#6760 = ORIENTED_EDGE('',*,*,#6761,.F.);+#6761 = EDGE_CURVE('',#6762,#6754,#6764,.T.);+#6762 = VERTEX_POINT('',#6763);+#6763 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6764 = LINE('',#6765,#6766);+#6765 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6766 = VECTOR('',#6767,1.);+#6767 = DIRECTION('',(0.,0.,1.));+#6768 = ORIENTED_EDGE('',*,*,#6769,.F.);+#6769 = EDGE_CURVE('',#6729,#6762,#6770,.T.);+#6770 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6771,#6772,#6773),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6771 = CARTESIAN_POINT('',(7.268760565493E-05,1.751771296282E-02,+ 1.552977284328));+#6772 = CARTESIAN_POINT('',(7.632198593761E-03,1.751771296282E-02,+ 1.552977284328));+#6773 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6774 = SURFACE_OF_LINEAR_EXTRUSION('',#6775,#6779);+#6775 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6776,#6777,#6778),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6776 = CARTESIAN_POINT('',(7.268760565493E-05,1.751771296282E-02,+ 1.552977284328));+#6777 = CARTESIAN_POINT('',(7.632198593761E-03,1.751771296282E-02,+ 1.552977284328));+#6778 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6779 = VECTOR('',#6780,1.);+#6780 = DIRECTION('',(-0.,-0.,-1.));+#6781 = ADVANCED_FACE('',(#6782),#6807,.T.);+#6782 = FACE_BOUND('',#6783,.T.);+#6783 = EDGE_LOOP('',(#6784,#6785,#6793,#6801));+#6784 = ORIENTED_EDGE('',*,*,#6761,.T.);+#6785 = ORIENTED_EDGE('',*,*,#6786,.T.);+#6786 = EDGE_CURVE('',#6754,#6787,#6789,.T.);+#6787 = VERTEX_POINT('',#6788);+#6788 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508938E-04,+ 1.558931852983));+#6789 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6790,#6791,#6792),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6790 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.558931852983));+#6791 = CARTESIAN_POINT('',(1.809921380806E-02,7.050697748522E-03,+ 1.558931852983));+#6792 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508944E-04,+ 1.558931852983));+#6793 = ORIENTED_EDGE('',*,*,#6794,.F.);+#6794 = EDGE_CURVE('',#6795,#6787,#6797,.T.);+#6795 = VERTEX_POINT('',#6796);+#6796 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508938E-04,+ 1.552977284328));+#6797 = LINE('',#6798,#6799);+#6798 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508938E-04,+ 1.552977284328));+#6799 = VECTOR('',#6800,1.);+#6800 = DIRECTION('',(0.,0.,1.));+#6801 = ORIENTED_EDGE('',*,*,#6802,.F.);+#6802 = EDGE_CURVE('',#6762,#6795,#6803,.T.);+#6803 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6804,#6805,#6806),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6804 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6805 = CARTESIAN_POINT('',(1.809921380806E-02,7.050697748522E-03,+ 1.552977284328));+#6806 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508944E-04,+ 1.552977284328));+#6807 = SURFACE_OF_LINEAR_EXTRUSION('',#6808,#6812);+#6808 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6809,#6810,#6811),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6809 = CARTESIAN_POINT('',(1.286570620091E-02,1.228420535567E-02,+ 1.552977284328));+#6810 = CARTESIAN_POINT('',(1.809921380806E-02,7.050697748522E-03,+ 1.552977284328));+#6811 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508944E-04,+ 1.552977284328));+#6812 = VECTOR('',#6813,1.);+#6813 = DIRECTION('',(-0.,-0.,-1.));+#6814 = ADVANCED_FACE('',(#6815),#6840,.T.);+#6815 = FACE_BOUND('',#6816,.T.);+#6816 = EDGE_LOOP('',(#6817,#6818,#6826,#6834));+#6817 = ORIENTED_EDGE('',*,*,#6794,.T.);+#6818 = ORIENTED_EDGE('',*,*,#6819,.T.);+#6819 = EDGE_CURVE('',#6787,#6820,#6822,.T.);+#6820 = VERTEX_POINT('',#6821);+#6821 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.558931852983));+#6822 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6823,#6824,#6825),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6823 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508944E-04,+ 1.558931852983));+#6824 = CARTESIAN_POINT('',(1.809921380806E-02,-8.213699439E-03,+ 1.558931852983));+#6825 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.558931852983));+#6826 = ORIENTED_EDGE('',*,*,#6827,.F.);+#6827 = EDGE_CURVE('',#6828,#6820,#6830,.T.);+#6828 = VERTEX_POINT('',#6829);+#6829 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.552977284328));+#6830 = LINE('',#6831,#6832);+#6831 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.552977284328));+#6832 = VECTOR('',#6833,1.);+#6833 = DIRECTION('',(0.,0.,1.));+#6834 = ORIENTED_EDGE('',*,*,#6835,.F.);+#6835 = EDGE_CURVE('',#6795,#6828,#6836,.T.);+#6836 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6837,#6838,#6839),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6837 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508944E-04,+ 1.552977284328));+#6838 = CARTESIAN_POINT('',(1.809921380806E-02,-8.213699439E-03,+ 1.552977284328));+#6839 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.552977284328));+#6840 = SURFACE_OF_LINEAR_EXTRUSION('',#6841,#6845);+#6841 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6842,#6843,#6844),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6842 = CARTESIAN_POINT('',(1.809921380806E-02,-6.541884508944E-04,+ 1.552977284328));+#6843 = CARTESIAN_POINT('',(1.809921380806E-02,-8.213699439E-03,+ 1.552977284328));+#6844 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.552977284328));+#6845 = VECTOR('',#6846,1.);+#6846 = DIRECTION('',(-0.,-0.,-1.));+#6847 = ADVANCED_FACE('',(#6848),#6864,.T.);+#6848 = FACE_BOUND('',#6849,.T.);+#6849 = EDGE_LOOP('',(#6850,#6851,#6857,#6858));+#6850 = ORIENTED_EDGE('',*,*,#6827,.T.);+#6851 = ORIENTED_EDGE('',*,*,#6852,.T.);+#6852 = EDGE_CURVE('',#6820,#6614,#6853,.T.);+#6853 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6854,#6855,#6856),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6854 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.558931852983));+#6855 = CARTESIAN_POINT('',(7.777573805071E-03,-1.86807146533E-02,+ 1.558931852983));+#6856 = CARTESIAN_POINT('',(7.268760565493E-05,-1.86807146533E-02,+ 1.558931852983));+#6857 = ORIENTED_EDGE('',*,*,#6611,.F.);+#6858 = ORIENTED_EDGE('',*,*,#6859,.F.);+#6859 = EDGE_CURVE('',#6828,#6612,#6860,.T.);+#6860 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6861,#6862,#6863),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6861 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.552977284328));+#6862 = CARTESIAN_POINT('',(7.777573805071E-03,-1.86807146533E-02,+ 1.552977284328));+#6863 = CARTESIAN_POINT('',(7.268760565493E-05,-1.86807146533E-02,+ 1.552977284328));+#6864 = SURFACE_OF_LINEAR_EXTRUSION('',#6865,#6869);+#6865 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6866,#6867,#6868),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6866 = CARTESIAN_POINT('',(1.293839380657E-02,-1.344720704615E-02,+ 1.552977284328));+#6867 = CARTESIAN_POINT('',(7.777573805071E-03,-1.86807146533E-02,+ 1.552977284328));+#6868 = CARTESIAN_POINT('',(7.268760565493E-05,-1.86807146533E-02,+ 1.552977284328));+#6869 = VECTOR('',#6870,1.);+#6870 = DIRECTION('',(-0.,-0.,-1.));+#6871 = ADVANCED_FACE('',(#6872),#6882,.F.);+#6872 = FACE_BOUND('',#6873,.T.);+#6873 = EDGE_LOOP('',(#6874,#6875,#6876,#6877,#6878,#6879,#6880,#6881));+#6874 = ORIENTED_EDGE('',*,*,#6637,.T.);+#6875 = ORIENTED_EDGE('',*,*,#6670,.T.);+#6876 = ORIENTED_EDGE('',*,*,#6703,.T.);+#6877 = ORIENTED_EDGE('',*,*,#6736,.T.);+#6878 = ORIENTED_EDGE('',*,*,#6769,.T.);+#6879 = ORIENTED_EDGE('',*,*,#6802,.T.);+#6880 = ORIENTED_EDGE('',*,*,#6835,.T.);+#6881 = ORIENTED_EDGE('',*,*,#6859,.T.);+#6882 = PLANE('',#6883);+#6883 = AXIS2_PLACEMENT_3D('',#6884,#6885,#6886);+#6884 = CARTESIAN_POINT('',(0.108377220031,-9.020531861769E-02,+ 1.552977284328));+#6885 = DIRECTION('',(0.,0.,1.));+#6886 = DIRECTION('',(1.110223024625E-16,1.,0.));+#6887 = ADVANCED_FACE('',(#6888),#6898,.T.);+#6888 = FACE_BOUND('',#6889,.F.);+#6889 = EDGE_LOOP('',(#6890,#6891,#6892,#6893,#6894,#6895,#6896,#6897));+#6890 = ORIENTED_EDGE('',*,*,#6621,.T.);+#6891 = ORIENTED_EDGE('',*,*,#6654,.T.);+#6892 = ORIENTED_EDGE('',*,*,#6687,.T.);+#6893 = ORIENTED_EDGE('',*,*,#6720,.T.);+#6894 = ORIENTED_EDGE('',*,*,#6753,.T.);+#6895 = ORIENTED_EDGE('',*,*,#6786,.T.);+#6896 = ORIENTED_EDGE('',*,*,#6819,.T.);+#6897 = ORIENTED_EDGE('',*,*,#6852,.T.);+#6898 = PLANE('',#6899);+#6899 = AXIS2_PLACEMENT_3D('',#6900,#6901,#6902);+#6900 = CARTESIAN_POINT('',(0.108377220031,-9.020531861769E-02,+ 1.558931852983));+#6901 = DIRECTION('',(0.,0.,1.));+#6902 = DIRECTION('',(1.110223024625E-16,1.,0.));+#6903 = MANIFOLD_SOLID_BREP('',#6904);+#6904 = CLOSED_SHELL('',(#6905,#6947,#6980,#7013,#7046,#7079,#7112,#7145+ ,#7169,#7211,#7244,#7277,#7310,#7343,#7376,#7409,#7433,#7459));+#6905 = ADVANCED_FACE('',(#6906),#6940,.T.);+#6906 = FACE_BOUND('',#6907,.T.);+#6907 = EDGE_LOOP('',(#6908,#6918,#6926,#6934));+#6908 = ORIENTED_EDGE('',*,*,#6909,.T.);+#6909 = EDGE_CURVE('',#6910,#6912,#6914,.T.);+#6910 = VERTEX_POINT('',#6911);+#6911 = CARTESIAN_POINT('',(7.268760565486E-05,-7.232416762659E-02,+ 1.552977284328));+#6912 = VERTEX_POINT('',#6913);+#6913 = CARTESIAN_POINT('',(7.268760565486E-05,-7.232416762659E-02,+ 1.558931852983));+#6914 = LINE('',#6915,#6916);+#6915 = CARTESIAN_POINT('',(7.268760565486E-05,-7.232416762659E-02,+ 1.552977284328));+#6916 = VECTOR('',#6917,1.);+#6917 = DIRECTION('',(0.,0.,1.));+#6918 = ORIENTED_EDGE('',*,*,#6919,.T.);+#6919 = EDGE_CURVE('',#6912,#6920,#6922,.T.);+#6920 = VERTEX_POINT('',#6921);+#6921 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.444301663549E-02,+ 1.558931852983));+#6922 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6923,#6924,#6925),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6923 = CARTESIAN_POINT('',(7.268760565493E-05,-7.232416762659E-02,+ 1.558931852983));+#6924 = CARTESIAN_POINT('',(-5.633289438252E-02,-7.232416762659E-02,+ 1.558931852983));+#6925 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.44430166355E-02,+ 1.558931852983));+#6926 = ORIENTED_EDGE('',*,*,#6927,.F.);+#6927 = EDGE_CURVE('',#6928,#6920,#6930,.T.);+#6928 = VERTEX_POINT('',#6929);+#6929 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.444301663549E-02,+ 1.552977284328));+#6930 = LINE('',#6931,#6932);+#6931 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.444301663549E-02,+ 1.552977284328));+#6932 = VECTOR('',#6933,1.);+#6933 = DIRECTION('',(0.,0.,1.));+#6934 = ORIENTED_EDGE('',*,*,#6935,.F.);+#6935 = EDGE_CURVE('',#6910,#6928,#6936,.T.);+#6936 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6937,#6938,#6939),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6937 = CARTESIAN_POINT('',(7.268760565493E-05,-7.232416762659E-02,+ 1.552977284328));+#6938 = CARTESIAN_POINT('',(-5.633289438252E-02,-7.232416762659E-02,+ 1.552977284328));+#6939 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.44430166355E-02,+ 1.552977284328));+#6940 = SURFACE_OF_LINEAR_EXTRUSION('',#6941,#6945);+#6941 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6942,#6943,#6944),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6942 = CARTESIAN_POINT('',(7.268760565493E-05,-7.232416762659E-02,+ 1.552977284328));+#6943 = CARTESIAN_POINT('',(-5.633289438252E-02,-7.232416762659E-02,+ 1.552977284328));+#6944 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.44430166355E-02,+ 1.552977284328));+#6945 = VECTOR('',#6946,1.);+#6946 = DIRECTION('',(-0.,-0.,-1.));+#6947 = ADVANCED_FACE('',(#6948),#6973,.T.);+#6948 = FACE_BOUND('',#6949,.T.);+#6949 = EDGE_LOOP('',(#6950,#6951,#6959,#6967));+#6950 = ORIENTED_EDGE('',*,*,#6927,.T.);+#6951 = ORIENTED_EDGE('',*,*,#6952,.T.);+#6952 = EDGE_CURVE('',#6920,#6953,#6955,.T.);+#6953 = VERTEX_POINT('',#6954);+#6954 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508938E-04,+ 1.558931852983));+#6955 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6956,#6957,#6958),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6956 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.44430166355E-02,+ 1.558931852983));+#6957 = CARTESIAN_POINT('',(-0.112593101159,-3.65618656444E-02,+ 1.558931852983));+#6958 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508944E-04,+ 1.558931852983));+#6959 = ORIENTED_EDGE('',*,*,#6960,.F.);+#6960 = EDGE_CURVE('',#6961,#6953,#6963,.T.);+#6961 = VERTEX_POINT('',#6962);+#6962 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508938E-04,+ 1.552977284328));+#6963 = LINE('',#6964,#6965);+#6964 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508938E-04,+ 1.552977284328));+#6965 = VECTOR('',#6966,1.);+#6966 = DIRECTION('',(0.,0.,1.));+#6967 = ORIENTED_EDGE('',*,*,#6968,.F.);+#6968 = EDGE_CURVE('',#6928,#6961,#6969,.T.);+#6969 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6970,#6971,#6972),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6970 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.44430166355E-02,+ 1.552977284328));+#6971 = CARTESIAN_POINT('',(-0.112593101159,-3.65618656444E-02,+ 1.552977284328));+#6972 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508944E-04,+ 1.552977284328));+#6973 = SURFACE_OF_LINEAR_EXTRUSION('',#6974,#6978);+#6974 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6975,#6976,#6977),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6975 = CARTESIAN_POINT('',(-8.446299777095E-02,-5.44430166355E-02,+ 1.552977284328));+#6976 = CARTESIAN_POINT('',(-0.112593101159,-3.65618656444E-02,+ 1.552977284328));+#6977 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508944E-04,+ 1.552977284328));+#6978 = VECTOR('',#6979,1.);+#6979 = DIRECTION('',(-0.,-0.,-1.));+#6980 = ADVANCED_FACE('',(#6981),#7006,.T.);+#6981 = FACE_BOUND('',#6982,.T.);+#6982 = EDGE_LOOP('',(#6983,#6984,#6992,#7000));+#6983 = ORIENTED_EDGE('',*,*,#6960,.T.);+#6984 = ORIENTED_EDGE('',*,*,#6985,.T.);+#6985 = EDGE_CURVE('',#6953,#6986,#6988,.T.);+#6986 = VERTEX_POINT('',#6987);+#6987 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.558931852983));+#6988 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6989,#6990,#6991),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6989 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508944E-04,+ 1.558931852983));+#6990 = CARTESIAN_POINT('',(-0.112593101159,3.539886395392E-02,+ 1.558931852983));+#6991 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.558931852983));+#6992 = ORIENTED_EDGE('',*,*,#6993,.F.);+#6993 = EDGE_CURVE('',#6994,#6986,#6996,.T.);+#6994 = VERTEX_POINT('',#6995);+#6995 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#6996 = LINE('',#6997,#6998);+#6997 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#6998 = VECTOR('',#6999,1.);+#6999 = DIRECTION('',(0.,0.,1.));+#7000 = ORIENTED_EDGE('',*,*,#7001,.F.);+#7001 = EDGE_CURVE('',#6961,#6994,#7002,.T.);+#7002 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7003,#7004,#7005),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7003 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508944E-04,+ 1.552977284328));+#7004 = CARTESIAN_POINT('',(-0.112593101159,3.539886395392E-02,+ 1.552977284328));+#7005 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7006 = SURFACE_OF_LINEAR_EXTRUSION('',#7007,#7011);+#7007 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7008,#7009,#7010),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7008 = CARTESIAN_POINT('',(-0.112593101159,-6.541884508944E-04,+ 1.552977284328));+#7009 = CARTESIAN_POINT('',(-0.112593101159,3.539886395392E-02,+ 1.552977284328));+#7010 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7011 = VECTOR('',#7012,1.);+#7012 = DIRECTION('',(-0.,-0.,-1.));+#7013 = ADVANCED_FACE('',(#7014),#7039,.T.);+#7014 = FACE_BOUND('',#7015,.T.);+#7015 = EDGE_LOOP('',(#7016,#7017,#7025,#7033));+#7016 = ORIENTED_EDGE('',*,*,#6993,.T.);+#7017 = ORIENTED_EDGE('',*,*,#7018,.T.);+#7018 = EDGE_CURVE('',#6986,#7019,#7021,.T.);+#7019 = VERTEX_POINT('',#7020);+#7020 = CARTESIAN_POINT('',(7.268760565487E-05,7.116116593611E-02,+ 1.558931852983));+#7021 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7022,#7023,#7024),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7022 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.558931852983));+#7023 = CARTESIAN_POINT('',(-5.647826959383E-02,7.116116593611E-02,+ 1.558931852983));+#7024 = CARTESIAN_POINT('',(7.268760565493E-05,7.116116593611E-02,+ 1.558931852983));+#7025 = ORIENTED_EDGE('',*,*,#7026,.F.);+#7026 = EDGE_CURVE('',#7027,#7019,#7029,.T.);+#7027 = VERTEX_POINT('',#7028);+#7028 = CARTESIAN_POINT('',(7.268760565487E-05,7.116116593611E-02,+ 1.552977284328));+#7029 = LINE('',#7030,#7031);+#7030 = CARTESIAN_POINT('',(7.268760565487E-05,7.116116593611E-02,+ 1.552977284328));+#7031 = VECTOR('',#7032,1.);+#7032 = DIRECTION('',(0.,0.,1.));+#7033 = ORIENTED_EDGE('',*,*,#7034,.F.);+#7034 = EDGE_CURVE('',#6994,#7027,#7035,.T.);+#7035 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7036,#7037,#7038),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7036 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7037 = CARTESIAN_POINT('',(-5.647826959383E-02,7.116116593611E-02,+ 1.552977284328));+#7038 = CARTESIAN_POINT('',(7.268760565493E-05,7.116116593611E-02,+ 1.552977284328));+#7039 = SURFACE_OF_LINEAR_EXTRUSION('',#7040,#7044);+#7040 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7041,#7042,#7043),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7041 = CARTESIAN_POINT('',(-8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7042 = CARTESIAN_POINT('',(-5.647826959383E-02,7.116116593611E-02,+ 1.552977284328));+#7043 = CARTESIAN_POINT('',(7.268760565493E-05,7.116116593611E-02,+ 1.552977284328));+#7044 = VECTOR('',#7045,1.);+#7045 = DIRECTION('',(-0.,-0.,-1.));+#7046 = ADVANCED_FACE('',(#7047),#7072,.T.);+#7047 = FACE_BOUND('',#7048,.T.);+#7048 = EDGE_LOOP('',(#7049,#7050,#7058,#7066));+#7049 = ORIENTED_EDGE('',*,*,#7026,.T.);+#7050 = ORIENTED_EDGE('',*,*,#7051,.T.);+#7051 = EDGE_CURVE('',#7019,#7052,#7054,.T.);+#7052 = VERTEX_POINT('',#7053);+#7053 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.558931852983));+#7054 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7055,#7056,#7057),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7055 = CARTESIAN_POINT('',(7.268760565493E-05,7.116116593611E-02,+ 1.558931852983));+#7056 = CARTESIAN_POINT('',(5.647826959383E-02,7.116116593611E-02,+ 1.558931852983));+#7057 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.558931852983));+#7058 = ORIENTED_EDGE('',*,*,#7059,.F.);+#7059 = EDGE_CURVE('',#7060,#7052,#7062,.T.);+#7060 = VERTEX_POINT('',#7061);+#7061 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7062 = LINE('',#7063,#7064);+#7063 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7064 = VECTOR('',#7065,1.);+#7065 = DIRECTION('',(0.,0.,1.));+#7066 = ORIENTED_EDGE('',*,*,#7067,.F.);+#7067 = EDGE_CURVE('',#7027,#7060,#7068,.T.);+#7068 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7069,#7070,#7071),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7069 = CARTESIAN_POINT('',(7.268760565493E-05,7.116116593611E-02,+ 1.552977284328));+#7070 = CARTESIAN_POINT('',(5.647826959383E-02,7.116116593611E-02,+ 1.552977284328));+#7071 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7072 = SURFACE_OF_LINEAR_EXTRUSION('',#7073,#7077);+#7073 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7074,#7075,#7076),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7074 = CARTESIAN_POINT('',(7.268760565493E-05,7.116116593611E-02,+ 1.552977284328));+#7075 = CARTESIAN_POINT('',(5.647826959383E-02,7.116116593611E-02,+ 1.552977284328));+#7076 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7077 = VECTOR('',#7078,1.);+#7078 = DIRECTION('',(-0.,-0.,-1.));+#7079 = ADVANCED_FACE('',(#7080),#7105,.T.);+#7080 = FACE_BOUND('',#7081,.T.);+#7081 = EDGE_LOOP('',(#7082,#7083,#7091,#7099));+#7082 = ORIENTED_EDGE('',*,*,#7059,.T.);+#7083 = ORIENTED_EDGE('',*,*,#7084,.T.);+#7084 = EDGE_CURVE('',#7052,#7085,#7087,.T.);+#7085 = VERTEX_POINT('',#7086);+#7086 = CARTESIAN_POINT('',(0.112593101159,-6.541884508938E-04,+ 1.558931852983));+#7087 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7088,#7089,#7090),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7088 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.558931852983));+#7089 = CARTESIAN_POINT('',(0.112593101159,3.539886395392E-02,+ 1.558931852983));+#7090 = CARTESIAN_POINT('',(0.112593101159,-6.541884508944E-04,+ 1.558931852983));+#7091 = ORIENTED_EDGE('',*,*,#7092,.F.);+#7092 = EDGE_CURVE('',#7093,#7085,#7095,.T.);+#7093 = VERTEX_POINT('',#7094);+#7094 = CARTESIAN_POINT('',(0.112593101159,-6.541884508938E-04,+ 1.552977284328));+#7095 = LINE('',#7096,#7097);+#7096 = CARTESIAN_POINT('',(0.112593101159,-6.541884508938E-04,+ 1.552977284328));+#7097 = VECTOR('',#7098,1.);+#7098 = DIRECTION('',(0.,0.,1.));+#7099 = ORIENTED_EDGE('',*,*,#7100,.F.);+#7100 = EDGE_CURVE('',#7060,#7093,#7101,.T.);+#7101 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7102,#7103,#7104),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7102 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7103 = CARTESIAN_POINT('',(0.112593101159,3.539886395392E-02,+ 1.552977284328));+#7104 = CARTESIAN_POINT('',(0.112593101159,-6.541884508944E-04,+ 1.552977284328));+#7105 = SURFACE_OF_LINEAR_EXTRUSION('',#7106,#7110);+#7106 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7107,#7108,#7109),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7107 = CARTESIAN_POINT('',(8.453568537661E-02,5.328001494502E-02,+ 1.552977284328));+#7108 = CARTESIAN_POINT('',(0.112593101159,3.539886395392E-02,+ 1.552977284328));+#7109 = CARTESIAN_POINT('',(0.112593101159,-6.541884508944E-04,+ 1.552977284328));+#7110 = VECTOR('',#7111,1.);+#7111 = DIRECTION('',(-0.,-0.,-1.));+#7112 = ADVANCED_FACE('',(#7113),#7138,.T.);+#7113 = FACE_BOUND('',#7114,.T.);+#7114 = EDGE_LOOP('',(#7115,#7116,#7124,#7132));+#7115 = ORIENTED_EDGE('',*,*,#7092,.T.);+#7116 = ORIENTED_EDGE('',*,*,#7117,.T.);+#7117 = EDGE_CURVE('',#7085,#7118,#7120,.T.);+#7118 = VERTEX_POINT('',#7119);+#7119 = CARTESIAN_POINT('',(8.446299777095E-02,-5.444301663549E-02,+ 1.558931852983));+#7120 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7121,#7122,#7123),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7121 = CARTESIAN_POINT('',(0.112593101159,-6.541884508944E-04,+ 1.558931852983));+#7122 = CARTESIAN_POINT('',(0.112593101159,-3.65618656444E-02,+ 1.558931852983));+#7123 = CARTESIAN_POINT('',(8.446299777095E-02,-5.44430166355E-02,+ 1.558931852983));+#7124 = ORIENTED_EDGE('',*,*,#7125,.F.);+#7125 = EDGE_CURVE('',#7126,#7118,#7128,.T.);+#7126 = VERTEX_POINT('',#7127);+#7127 = CARTESIAN_POINT('',(8.446299777095E-02,-5.444301663549E-02,+ 1.552977284328));+#7128 = LINE('',#7129,#7130);+#7129 = CARTESIAN_POINT('',(8.446299777095E-02,-5.444301663549E-02,+ 1.552977284328));+#7130 = VECTOR('',#7131,1.);+#7131 = DIRECTION('',(0.,0.,1.));+#7132 = ORIENTED_EDGE('',*,*,#7133,.F.);+#7133 = EDGE_CURVE('',#7093,#7126,#7134,.T.);+#7134 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7135,#7136,#7137),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7135 = CARTESIAN_POINT('',(0.112593101159,-6.541884508944E-04,+ 1.552977284328));+#7136 = CARTESIAN_POINT('',(0.112593101159,-3.65618656444E-02,+ 1.552977284328));+#7137 = CARTESIAN_POINT('',(8.446299777095E-02,-5.44430166355E-02,+ 1.552977284328));+#7138 = SURFACE_OF_LINEAR_EXTRUSION('',#7139,#7143);+#7139 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7140,#7141,#7142),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7140 = CARTESIAN_POINT('',(0.112593101159,-6.541884508944E-04,+ 1.552977284328));+#7141 = CARTESIAN_POINT('',(0.112593101159,-3.65618656444E-02,+ 1.552977284328));+#7142 = CARTESIAN_POINT('',(8.446299777095E-02,-5.44430166355E-02,+ 1.552977284328));+#7143 = VECTOR('',#7144,1.);+#7144 = DIRECTION('',(-0.,-0.,-1.));+#7145 = ADVANCED_FACE('',(#7146),#7162,.T.);+#7146 = FACE_BOUND('',#7147,.T.);+#7147 = EDGE_LOOP('',(#7148,#7149,#7155,#7156));+#7148 = ORIENTED_EDGE('',*,*,#7125,.T.);+#7149 = ORIENTED_EDGE('',*,*,#7150,.T.);+#7150 = EDGE_CURVE('',#7118,#6912,#7151,.T.);+#7151 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7152,#7153,#7154),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7152 = CARTESIAN_POINT('',(8.446299777095E-02,-5.44430166355E-02,+ 1.558931852983));+#7153 = CARTESIAN_POINT('',(5.633289438252E-02,-7.232416762659E-02,+ 1.558931852983));+#7154 = CARTESIAN_POINT('',(7.268760565493E-05,-7.232416762659E-02,+ 1.558931852983));+#7155 = ORIENTED_EDGE('',*,*,#6909,.F.);+#7156 = ORIENTED_EDGE('',*,*,#7157,.F.);+#7157 = EDGE_CURVE('',#7126,#6910,#7158,.T.);+#7158 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7159,#7160,#7161),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7159 = CARTESIAN_POINT('',(8.446299777095E-02,-5.44430166355E-02,+ 1.552977284328));+#7160 = CARTESIAN_POINT('',(5.633289438252E-02,-7.232416762659E-02,+ 1.552977284328));+#7161 = CARTESIAN_POINT('',(7.268760565493E-05,-7.232416762659E-02,+ 1.552977284328));+#7162 = SURFACE_OF_LINEAR_EXTRUSION('',#7163,#7167);+#7163 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7164,#7165,#7166),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7164 = CARTESIAN_POINT('',(8.446299777095E-02,-5.44430166355E-02,+ 1.552977284328));+#7165 = CARTESIAN_POINT('',(5.633289438252E-02,-7.232416762659E-02,+ 1.552977284328));+#7166 = CARTESIAN_POINT('',(7.268760565493E-05,-7.232416762659E-02,+ 1.552977284328));+#7167 = VECTOR('',#7168,1.);+#7168 = DIRECTION('',(-0.,-0.,-1.));+#7169 = ADVANCED_FACE('',(#7170),#7204,.T.);+#7170 = FACE_BOUND('',#7171,.T.);+#7171 = EDGE_LOOP('',(#7172,#7182,#7190,#7198));+#7172 = ORIENTED_EDGE('',*,*,#7173,.T.);+#7173 = EDGE_CURVE('',#7174,#7176,#7178,.T.);+#7174 = VERTEX_POINT('',#7175);+#7175 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508938E-04,+ 1.552977284328));+#7176 = VERTEX_POINT('',#7177);+#7177 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508938E-04,+ 1.558931852983));+#7178 = LINE('',#7179,#7180);+#7179 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508938E-04,+ 1.552977284328));+#7180 = VECTOR('',#7181,1.);+#7181 = DIRECTION('',(0.,0.,1.));+#7182 = ORIENTED_EDGE('',*,*,#7183,.T.);+#7183 = EDGE_CURVE('',#7176,#7184,#7186,.T.);+#7184 = VERTEX_POINT('',#7185);+#7185 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.558931852983));+#7186 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7187,#7188,#7189),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7187 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508944E-04,+ 1.558931852983));+#7188 = CARTESIAN_POINT('',(-7.624929833195E-02,-1.548246000449E-02,+ 1.558931852983));+#7189 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.558931852983));+#7190 = ORIENTED_EDGE('',*,*,#7191,.F.);+#7191 = EDGE_CURVE('',#7192,#7184,#7194,.T.);+#7192 = VERTEX_POINT('',#7193);+#7193 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7194 = LINE('',#7195,#7196);+#7195 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7196 = VECTOR('',#7197,1.);+#7197 = DIRECTION('',(0.,0.,1.));+#7198 = ORIENTED_EDGE('',*,*,#7199,.F.);+#7199 = EDGE_CURVE('',#7174,#7192,#7200,.T.);+#7200 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7201,#7202,#7203),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7201 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508944E-04,+ 1.552977284328));+#7202 = CARTESIAN_POINT('',(-7.624929833195E-02,-1.548246000449E-02,+ 1.552977284328));+#7203 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7204 = SURFACE_OF_LINEAR_EXTRUSION('',#7205,#7209);+#7205 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7206,#7207,#7208),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7206 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508944E-04,+ 1.552977284328));+#7207 = CARTESIAN_POINT('',(-7.624929833195E-02,-1.548246000449E-02,+ 1.552977284328));+#7208 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7209 = VECTOR('',#7210,1.);+#7210 = DIRECTION('',(-0.,-0.,-1.));+#7211 = ADVANCED_FACE('',(#7212),#7237,.T.);+#7212 = FACE_BOUND('',#7213,.T.);+#7213 = EDGE_LOOP('',(#7214,#7215,#7223,#7231));+#7214 = ORIENTED_EDGE('',*,*,#7191,.T.);+#7215 = ORIENTED_EDGE('',*,*,#7216,.T.);+#7216 = EDGE_CURVE('',#7184,#7217,#7219,.T.);+#7217 = VERTEX_POINT('',#7218);+#7218 = CARTESIAN_POINT('',(7.268760565486E-05,-2.91477298676E-02,+ 1.558931852983));+#7219 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7220,#7221,#7222),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7220 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.558931852983));+#7221 = CARTESIAN_POINT('',(-3.990549550452E-02,-2.91477298676E-02,+ 1.558931852983));+#7222 = CARTESIAN_POINT('',(7.268760565493E-05,-2.91477298676E-02,+ 1.558931852983));+#7223 = ORIENTED_EDGE('',*,*,#7224,.F.);+#7224 = EDGE_CURVE('',#7225,#7217,#7227,.T.);+#7225 = VERTEX_POINT('',#7226);+#7226 = CARTESIAN_POINT('',(7.268760565486E-05,-2.91477298676E-02,+ 1.552977284328));+#7227 = LINE('',#7228,#7229);+#7228 = CARTESIAN_POINT('',(7.268760565486E-05,-2.91477298676E-02,+ 1.552977284328));+#7229 = VECTOR('',#7230,1.);+#7230 = DIRECTION('',(0.,0.,1.));+#7231 = ORIENTED_EDGE('',*,*,#7232,.F.);+#7232 = EDGE_CURVE('',#7192,#7225,#7233,.T.);+#7233 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7234,#7235,#7236),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7234 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7235 = CARTESIAN_POINT('',(-3.990549550452E-02,-2.91477298676E-02,+ 1.552977284328));+#7236 = CARTESIAN_POINT('',(7.268760565493E-05,-2.91477298676E-02,+ 1.552977284328));+#7237 = SURFACE_OF_LINEAR_EXTRUSION('',#7238,#7242);+#7238 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7239,#7240,#7241),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7239 = CARTESIAN_POINT('',(-5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7240 = CARTESIAN_POINT('',(-3.990549550452E-02,-2.91477298676E-02,+ 1.552977284328));+#7241 = CARTESIAN_POINT('',(7.268760565493E-05,-2.91477298676E-02,+ 1.552977284328));+#7242 = VECTOR('',#7243,1.);+#7243 = DIRECTION('',(-0.,-0.,-1.));+#7244 = ADVANCED_FACE('',(#7245),#7270,.T.);+#7245 = FACE_BOUND('',#7246,.T.);+#7246 = EDGE_LOOP('',(#7247,#7248,#7256,#7264));+#7247 = ORIENTED_EDGE('',*,*,#7224,.T.);+#7248 = ORIENTED_EDGE('',*,*,#7249,.T.);+#7249 = EDGE_CURVE('',#7217,#7250,#7252,.T.);+#7250 = VERTEX_POINT('',#7251);+#7251 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.558931852983));+#7252 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7253,#7254,#7255),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7253 = CARTESIAN_POINT('',(7.268760565493E-05,-2.91477298676E-02,+ 1.558931852983));+#7254 = CARTESIAN_POINT('',(3.990549550452E-02,-2.91477298676E-02,+ 1.558931852983));+#7255 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.558931852983));+#7256 = ORIENTED_EDGE('',*,*,#7257,.F.);+#7257 = EDGE_CURVE('',#7258,#7250,#7260,.T.);+#7258 = VERTEX_POINT('',#7259);+#7259 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7260 = LINE('',#7261,#7262);+#7261 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7262 = VECTOR('',#7263,1.);+#7263 = DIRECTION('',(0.,0.,1.));+#7264 = ORIENTED_EDGE('',*,*,#7265,.F.);+#7265 = EDGE_CURVE('',#7225,#7258,#7266,.T.);+#7266 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7267,#7268,#7269),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7267 = CARTESIAN_POINT('',(7.268760565493E-05,-2.91477298676E-02,+ 1.552977284328));+#7268 = CARTESIAN_POINT('',(3.990549550452E-02,-2.91477298676E-02,+ 1.552977284328));+#7269 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7270 = SURFACE_OF_LINEAR_EXTRUSION('',#7271,#7275);+#7271 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7272,#7273,#7274),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7272 = CARTESIAN_POINT('',(7.268760565493E-05,-2.91477298676E-02,+ 1.552977284328));+#7273 = CARTESIAN_POINT('',(3.990549550452E-02,-2.91477298676E-02,+ 1.552977284328));+#7274 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7275 = VECTOR('',#7276,1.);+#7276 = DIRECTION('',(-0.,-0.,-1.));+#7277 = ADVANCED_FACE('',(#7278),#7303,.T.);+#7278 = FACE_BOUND('',#7279,.T.);+#7279 = EDGE_LOOP('',(#7280,#7281,#7289,#7297));+#7280 = ORIENTED_EDGE('',*,*,#7257,.T.);+#7281 = ORIENTED_EDGE('',*,*,#7282,.T.);+#7282 = EDGE_CURVE('',#7250,#7283,#7285,.T.);+#7283 = VERTEX_POINT('',#7284);+#7284 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508938E-04,+ 1.558931852983));+#7285 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7286,#7287,#7288),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7286 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.558931852983));+#7287 = CARTESIAN_POINT('',(7.624929833195E-02,-1.548246000449E-02,+ 1.558931852983));+#7288 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508944E-04,+ 1.558931852983));+#7289 = ORIENTED_EDGE('',*,*,#7290,.F.);+#7290 = EDGE_CURVE('',#7291,#7283,#7293,.T.);+#7291 = VERTEX_POINT('',#7292);+#7292 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508938E-04,+ 1.552977284328));+#7293 = LINE('',#7294,#7295);+#7294 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508938E-04,+ 1.552977284328));+#7295 = VECTOR('',#7296,1.);+#7296 = DIRECTION('',(0.,0.,1.));+#7297 = ORIENTED_EDGE('',*,*,#7298,.F.);+#7298 = EDGE_CURVE('',#7258,#7291,#7299,.T.);+#7299 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7300,#7301,#7302),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7300 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7301 = CARTESIAN_POINT('',(7.624929833195E-02,-1.548246000449E-02,+ 1.552977284328));+#7302 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508944E-04,+ 1.552977284328));+#7303 = SURFACE_OF_LINEAR_EXTRUSION('',#7304,#7308);+#7304 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7305,#7306,#7307),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7305 = CARTESIAN_POINT('',(5.807739691824E-02,-2.231509493604E-02,+ 1.552977284328));+#7306 = CARTESIAN_POINT('',(7.624929833195E-02,-1.548246000449E-02,+ 1.552977284328));+#7307 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508944E-04,+ 1.552977284328));+#7308 = VECTOR('',#7309,1.);+#7309 = DIRECTION('',(-0.,-0.,-1.));+#7310 = ADVANCED_FACE('',(#7311),#7336,.T.);+#7311 = FACE_BOUND('',#7312,.T.);+#7312 = EDGE_LOOP('',(#7313,#7314,#7322,#7330));+#7313 = ORIENTED_EDGE('',*,*,#7290,.T.);+#7314 = ORIENTED_EDGE('',*,*,#7315,.T.);+#7315 = EDGE_CURVE('',#7283,#7316,#7318,.T.);+#7316 = VERTEX_POINT('',#7317);+#7317 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.558931852983));+#7318 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7319,#7320,#7321),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7319 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508944E-04,+ 1.558931852983));+#7320 = CARTESIAN_POINT('',(7.624929833195E-02,1.431945831401E-02,+ 1.558931852983));+#7321 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.558931852983));+#7322 = ORIENTED_EDGE('',*,*,#7323,.F.);+#7323 = EDGE_CURVE('',#7324,#7316,#7326,.T.);+#7324 = VERTEX_POINT('',#7325);+#7325 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7326 = LINE('',#7327,#7328);+#7327 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7328 = VECTOR('',#7329,1.);+#7329 = DIRECTION('',(0.,0.,1.));+#7330 = ORIENTED_EDGE('',*,*,#7331,.F.);+#7331 = EDGE_CURVE('',#7291,#7324,#7332,.T.);+#7332 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7333,#7334,#7335),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7333 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508944E-04,+ 1.552977284328));+#7334 = CARTESIAN_POINT('',(7.624929833195E-02,1.431945831401E-02,+ 1.552977284328));+#7335 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7336 = SURFACE_OF_LINEAR_EXTRUSION('',#7337,#7341);+#7337 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7338,#7339,#7340),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7338 = CARTESIAN_POINT('',(7.624929833195E-02,-6.541884508944E-04,+ 1.552977284328));+#7339 = CARTESIAN_POINT('',(7.624929833195E-02,1.431945831401E-02,+ 1.552977284328));+#7340 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7341 = VECTOR('',#7342,1.);+#7342 = DIRECTION('',(-0.,-0.,-1.));+#7343 = ADVANCED_FACE('',(#7344),#7369,.T.);+#7344 = FACE_BOUND('',#7345,.T.);+#7345 = EDGE_LOOP('',(#7346,#7347,#7355,#7363));+#7346 = ORIENTED_EDGE('',*,*,#7323,.T.);+#7347 = ORIENTED_EDGE('',*,*,#7348,.T.);+#7348 = EDGE_CURVE('',#7316,#7349,#7351,.T.);+#7349 = VERTEX_POINT('',#7350);+#7350 = CARTESIAN_POINT('',(7.268760565487E-05,2.798472817712E-02,+ 1.558931852983));+#7351 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7352,#7353,#7354),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7352 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.558931852983));+#7353 = CARTESIAN_POINT('',(3.990549550452E-02,2.798472817712E-02,+ 1.558931852983));+#7354 = CARTESIAN_POINT('',(7.268760565493E-05,2.798472817712E-02,+ 1.558931852983));+#7355 = ORIENTED_EDGE('',*,*,#7356,.F.);+#7356 = EDGE_CURVE('',#7357,#7349,#7359,.T.);+#7357 = VERTEX_POINT('',#7358);+#7358 = CARTESIAN_POINT('',(7.268760565487E-05,2.798472817712E-02,+ 1.552977284328));+#7359 = LINE('',#7360,#7361);+#7360 = CARTESIAN_POINT('',(7.268760565487E-05,2.798472817712E-02,+ 1.552977284328));+#7361 = VECTOR('',#7362,1.);+#7362 = DIRECTION('',(0.,0.,1.));+#7363 = ORIENTED_EDGE('',*,*,#7364,.F.);+#7364 = EDGE_CURVE('',#7324,#7357,#7365,.T.);+#7365 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7366,#7367,#7368),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7366 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7367 = CARTESIAN_POINT('',(3.990549550452E-02,2.798472817712E-02,+ 1.552977284328));+#7368 = CARTESIAN_POINT('',(7.268760565493E-05,2.798472817712E-02,+ 1.552977284328));+#7369 = SURFACE_OF_LINEAR_EXTRUSION('',#7370,#7374);+#7370 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7371,#7372,#7373),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7371 = CARTESIAN_POINT('',(5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7372 = CARTESIAN_POINT('',(3.990549550452E-02,2.798472817712E-02,+ 1.552977284328));+#7373 = CARTESIAN_POINT('',(7.268760565493E-05,2.798472817712E-02,+ 1.552977284328));+#7374 = VECTOR('',#7375,1.);+#7375 = DIRECTION('',(-0.,-0.,-1.));+#7376 = ADVANCED_FACE('',(#7377),#7402,.T.);+#7377 = FACE_BOUND('',#7378,.T.);+#7378 = EDGE_LOOP('',(#7379,#7380,#7388,#7396));+#7379 = ORIENTED_EDGE('',*,*,#7356,.T.);+#7380 = ORIENTED_EDGE('',*,*,#7381,.T.);+#7381 = EDGE_CURVE('',#7349,#7382,#7384,.T.);+#7382 = VERTEX_POINT('',#7383);+#7383 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.558931852983));+#7384 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7385,#7386,#7387),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7385 = CARTESIAN_POINT('',(7.268760565493E-05,2.798472817712E-02,+ 1.558931852983));+#7386 = CARTESIAN_POINT('',(-3.990549550452E-02,2.798472817712E-02,+ 1.558931852983));+#7387 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.558931852983));+#7388 = ORIENTED_EDGE('',*,*,#7389,.F.);+#7389 = EDGE_CURVE('',#7390,#7382,#7392,.T.);+#7390 = VERTEX_POINT('',#7391);+#7391 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7392 = LINE('',#7393,#7394);+#7393 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7394 = VECTOR('',#7395,1.);+#7395 = DIRECTION('',(0.,0.,1.));+#7396 = ORIENTED_EDGE('',*,*,#7397,.F.);+#7397 = EDGE_CURVE('',#7357,#7390,#7398,.T.);+#7398 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7399,#7400,#7401),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7399 = CARTESIAN_POINT('',(7.268760565493E-05,2.798472817712E-02,+ 1.552977284328));+#7400 = CARTESIAN_POINT('',(-3.990549550452E-02,2.798472817712E-02,+ 1.552977284328));+#7401 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7402 = SURFACE_OF_LINEAR_EXTRUSION('',#7403,#7407);+#7403 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7404,#7405,#7406),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7404 = CARTESIAN_POINT('',(7.268760565493E-05,2.798472817712E-02,+ 1.552977284328));+#7405 = CARTESIAN_POINT('',(-3.990549550452E-02,2.798472817712E-02,+ 1.552977284328));+#7406 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7407 = VECTOR('',#7408,1.);+#7408 = DIRECTION('',(-0.,-0.,-1.));+#7409 = ADVANCED_FACE('',(#7410),#7426,.T.);+#7410 = FACE_BOUND('',#7411,.T.);+#7411 = EDGE_LOOP('',(#7412,#7413,#7419,#7420));+#7412 = ORIENTED_EDGE('',*,*,#7389,.T.);+#7413 = ORIENTED_EDGE('',*,*,#7414,.T.);+#7414 = EDGE_CURVE('',#7382,#7176,#7415,.T.);+#7415 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7416,#7417,#7418),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7416 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.558931852983));+#7417 = CARTESIAN_POINT('',(-7.624929833195E-02,1.431945831401E-02,+ 1.558931852983));+#7418 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508944E-04,+ 1.558931852983));+#7419 = ORIENTED_EDGE('',*,*,#7173,.F.);+#7420 = ORIENTED_EDGE('',*,*,#7421,.F.);+#7421 = EDGE_CURVE('',#7390,#7174,#7422,.T.);+#7422 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7423,#7424,#7425),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7423 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7424 = CARTESIAN_POINT('',(-7.624929833195E-02,1.431945831401E-02,+ 1.552977284328));+#7425 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508944E-04,+ 1.552977284328));+#7426 = SURFACE_OF_LINEAR_EXTRUSION('',#7427,#7431);+#7427 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7428,#7429,#7430),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7428 = CARTESIAN_POINT('',(-5.807739691824E-02,2.115209324557E-02,+ 1.552977284328));+#7429 = CARTESIAN_POINT('',(-7.624929833195E-02,1.431945831401E-02,+ 1.552977284328));+#7430 = CARTESIAN_POINT('',(-7.624929833195E-02,-6.541884508944E-04,+ 1.552977284328));+#7431 = VECTOR('',#7432,1.);+#7432 = DIRECTION('',(-0.,-0.,-1.));+#7433 = ADVANCED_FACE('',(#7434,#7444),#7454,.F.);+#7434 = FACE_BOUND('',#7435,.T.);+#7435 = EDGE_LOOP('',(#7436,#7437,#7438,#7439,#7440,#7441,#7442,#7443));+#7436 = ORIENTED_EDGE('',*,*,#6935,.T.);+#7437 = ORIENTED_EDGE('',*,*,#6968,.T.);+#7438 = ORIENTED_EDGE('',*,*,#7001,.T.);+#7439 = ORIENTED_EDGE('',*,*,#7034,.T.);+#7440 = ORIENTED_EDGE('',*,*,#7067,.T.);+#7441 = ORIENTED_EDGE('',*,*,#7100,.T.);+#7442 = ORIENTED_EDGE('',*,*,#7133,.T.);+#7443 = ORIENTED_EDGE('',*,*,#7157,.T.);+#7444 = FACE_BOUND('',#7445,.T.);+#7445 = EDGE_LOOP('',(#7446,#7447,#7448,#7449,#7450,#7451,#7452,#7453));+#7446 = ORIENTED_EDGE('',*,*,#7199,.T.);+#7447 = ORIENTED_EDGE('',*,*,#7232,.T.);+#7448 = ORIENTED_EDGE('',*,*,#7265,.T.);+#7449 = ORIENTED_EDGE('',*,*,#7298,.T.);+#7450 = ORIENTED_EDGE('',*,*,#7331,.T.);+#7451 = ORIENTED_EDGE('',*,*,#7364,.T.);+#7452 = ORIENTED_EDGE('',*,*,#7397,.T.);+#7453 = ORIENTED_EDGE('',*,*,#7421,.T.);+#7454 = PLANE('',#7455);+#7455 = AXIS2_PLACEMENT_3D('',#7456,#7457,#7458);+#7456 = CARTESIAN_POINT('',(0.108377220031,-9.020531861769E-02,+ 1.552977284328));+#7457 = DIRECTION('',(0.,0.,1.));+#7458 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7459 = ADVANCED_FACE('',(#7460,#7470),#7480,.T.);+#7460 = FACE_BOUND('',#7461,.F.);+#7461 = EDGE_LOOP('',(#7462,#7463,#7464,#7465,#7466,#7467,#7468,#7469));+#7462 = ORIENTED_EDGE('',*,*,#6919,.T.);+#7463 = ORIENTED_EDGE('',*,*,#6952,.T.);+#7464 = ORIENTED_EDGE('',*,*,#6985,.T.);+#7465 = ORIENTED_EDGE('',*,*,#7018,.T.);+#7466 = ORIENTED_EDGE('',*,*,#7051,.T.);+#7467 = ORIENTED_EDGE('',*,*,#7084,.T.);+#7468 = ORIENTED_EDGE('',*,*,#7117,.T.);+#7469 = ORIENTED_EDGE('',*,*,#7150,.T.);+#7470 = FACE_BOUND('',#7471,.F.);+#7471 = EDGE_LOOP('',(#7472,#7473,#7474,#7475,#7476,#7477,#7478,#7479));+#7472 = ORIENTED_EDGE('',*,*,#7183,.T.);+#7473 = ORIENTED_EDGE('',*,*,#7216,.T.);+#7474 = ORIENTED_EDGE('',*,*,#7249,.T.);+#7475 = ORIENTED_EDGE('',*,*,#7282,.T.);+#7476 = ORIENTED_EDGE('',*,*,#7315,.T.);+#7477 = ORIENTED_EDGE('',*,*,#7348,.T.);+#7478 = ORIENTED_EDGE('',*,*,#7381,.T.);+#7479 = ORIENTED_EDGE('',*,*,#7414,.T.);+#7480 = PLANE('',#7481);+#7481 = AXIS2_PLACEMENT_3D('',#7482,#7483,#7484);+#7482 = CARTESIAN_POINT('',(0.108377220031,-9.020531861769E-02,+ 1.558931852983));+#7483 = DIRECTION('',(0.,0.,1.));+#7484 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7485 = MANIFOLD_SOLID_BREP('',#7486);+#7486 = CLOSED_SHELL('',(#7487,#7527,#7558,#7589,#7620,#7651,#7682,#7713+ ,#7744,#7775,#7797,#7815));+#7487 = ADVANCED_FACE('',(#7488),#7522,.T.);+#7488 = FACE_BOUND('',#7489,.T.);+#7489 = EDGE_LOOP('',(#7490,#7500,#7508,#7516));+#7490 = ORIENTED_EDGE('',*,*,#7491,.T.);+#7491 = EDGE_CURVE('',#7492,#7494,#7496,.T.);+#7492 = VERTEX_POINT('',#7493);+#7493 = CARTESIAN_POINT('',(0.108377220031,0.106341967073,1.552977284328+ ));+#7494 = VERTEX_POINT('',#7495);+#7495 = CARTESIAN_POINT('',(0.108377220031,0.106341967073,1.558931852983+ ));+#7496 = LINE('',#7497,#7498);+#7497 = CARTESIAN_POINT('',(0.108377220031,0.106341967073,1.552977284328+ ));+#7498 = VECTOR('',#7499,1.);+#7499 = DIRECTION('',(0.,0.,1.));+#7500 = ORIENTED_EDGE('',*,*,#7501,.T.);+#7501 = EDGE_CURVE('',#7494,#7502,#7504,.T.);+#7502 = VERTEX_POINT('',#7503);+#7503 = CARTESIAN_POINT('',(-0.108667970454,0.106341967073,+ 1.558931852983));+#7504 = LINE('',#7505,#7506);+#7505 = CARTESIAN_POINT('',(0.108377220031,0.106341967073,1.558931852983+ ));+#7506 = VECTOR('',#7507,1.);+#7507 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7508 = ORIENTED_EDGE('',*,*,#7509,.F.);+#7509 = EDGE_CURVE('',#7510,#7502,#7512,.T.);+#7510 = VERTEX_POINT('',#7511);+#7511 = CARTESIAN_POINT('',(-0.108667970454,0.106341967073,+ 1.552977284328));+#7512 = LINE('',#7513,#7514);+#7513 = CARTESIAN_POINT('',(-0.108667970454,0.106341967073,+ 1.552977284328));+#7514 = VECTOR('',#7515,1.);+#7515 = DIRECTION('',(0.,0.,1.));+#7516 = ORIENTED_EDGE('',*,*,#7517,.F.);+#7517 = EDGE_CURVE('',#7492,#7510,#7518,.T.);+#7518 = LINE('',#7519,#7520);+#7519 = CARTESIAN_POINT('',(0.108377220031,0.106341967073,1.552977284328+ ));+#7520 = VECTOR('',#7521,1.);+#7521 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7522 = PLANE('',#7523);+#7523 = AXIS2_PLACEMENT_3D('',#7524,#7525,#7526);+#7524 = CARTESIAN_POINT('',(0.108377220031,0.106341967073,1.552977284328+ ));+#7525 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7526 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7527 = ADVANCED_FACE('',(#7528),#7553,.T.);+#7528 = FACE_BOUND('',#7529,.T.);+#7529 = EDGE_LOOP('',(#7530,#7531,#7539,#7547));+#7530 = ORIENTED_EDGE('',*,*,#7509,.T.);+#7531 = ORIENTED_EDGE('',*,*,#7532,.T.);+#7532 = EDGE_CURVE('',#7502,#7533,#7535,.T.);+#7533 = VERTEX_POINT('',#7534);+#7534 = CARTESIAN_POINT('',(-0.108667970454,0.152425909058,+ 1.558931852983));+#7535 = LINE('',#7536,#7537);+#7536 = CARTESIAN_POINT('',(-0.108667970454,0.106341967073,+ 1.558931852983));+#7537 = VECTOR('',#7538,1.);+#7538 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7539 = ORIENTED_EDGE('',*,*,#7540,.F.);+#7540 = EDGE_CURVE('',#7541,#7533,#7543,.T.);+#7541 = VERTEX_POINT('',#7542);+#7542 = CARTESIAN_POINT('',(-0.108667970454,0.152425909058,+ 1.552977284328));+#7543 = LINE('',#7544,#7545);+#7544 = CARTESIAN_POINT('',(-0.108667970454,0.152425909058,+ 1.552977284328));+#7545 = VECTOR('',#7546,1.);+#7546 = DIRECTION('',(0.,0.,1.));+#7547 = ORIENTED_EDGE('',*,*,#7548,.F.);+#7548 = EDGE_CURVE('',#7510,#7541,#7549,.T.);+#7549 = LINE('',#7550,#7551);+#7550 = CARTESIAN_POINT('',(-0.108667970454,0.106341967073,+ 1.552977284328));+#7551 = VECTOR('',#7552,1.);+#7552 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7553 = PLANE('',#7554);+#7554 = AXIS2_PLACEMENT_3D('',#7555,#7556,#7557);+#7555 = CARTESIAN_POINT('',(-0.108667970454,0.106341967073,+ 1.552977284328));+#7556 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7557 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7558 = ADVANCED_FACE('',(#7559),#7584,.T.);+#7559 = FACE_BOUND('',#7560,.T.);+#7560 = EDGE_LOOP('',(#7561,#7562,#7570,#7578));+#7561 = ORIENTED_EDGE('',*,*,#7540,.T.);+#7562 = ORIENTED_EDGE('',*,*,#7563,.T.);+#7563 = EDGE_CURVE('',#7533,#7564,#7566,.T.);+#7564 = VERTEX_POINT('',#7565);+#7565 = CARTESIAN_POINT('',(4.906413381703E-02,0.212901996963,+ 1.558931852983));+#7566 = LINE('',#7567,#7568);+#7567 = CARTESIAN_POINT('',(-0.108667970454,0.152425909058,+ 1.558931852983));+#7568 = VECTOR('',#7569,1.);+#7569 = DIRECTION('',(0.933722146707,0.357998537355,0.));+#7570 = ORIENTED_EDGE('',*,*,#7571,.F.);+#7571 = EDGE_CURVE('',#7572,#7564,#7574,.T.);+#7572 = VERTEX_POINT('',#7573);+#7573 = CARTESIAN_POINT('',(4.906413381703E-02,0.212901996963,+ 1.552977284328));+#7574 = LINE('',#7575,#7576);+#7575 = CARTESIAN_POINT('',(4.906413381703E-02,0.212901996963,+ 1.552977284328));+#7576 = VECTOR('',#7577,1.);+#7577 = DIRECTION('',(0.,0.,1.));+#7578 = ORIENTED_EDGE('',*,*,#7579,.F.);+#7579 = EDGE_CURVE('',#7541,#7572,#7580,.T.);+#7580 = LINE('',#7581,#7582);+#7581 = CARTESIAN_POINT('',(-0.108667970454,0.152425909058,+ 1.552977284328));+#7582 = VECTOR('',#7583,1.);+#7583 = DIRECTION('',(0.933722146707,0.357998537355,0.));+#7584 = PLANE('',#7585);+#7585 = AXIS2_PLACEMENT_3D('',#7586,#7587,#7588);+#7586 = CARTESIAN_POINT('',(-0.108667970454,0.152425909058,+ 1.552977284328));+#7587 = DIRECTION('',(-0.357998537355,0.933722146707,0.));+#7588 = DIRECTION('',(0.933722146707,0.357998537355,0.));+#7589 = ADVANCED_FACE('',(#7590),#7615,.T.);+#7590 = FACE_BOUND('',#7591,.T.);+#7591 = EDGE_LOOP('',(#7592,#7593,#7601,#7609));+#7592 = ORIENTED_EDGE('',*,*,#7571,.T.);+#7593 = ORIENTED_EDGE('',*,*,#7594,.T.);+#7594 = EDGE_CURVE('',#7564,#7595,#7597,.T.);+#7595 = VERTEX_POINT('',#7596);+#7596 = CARTESIAN_POINT('',(-0.108667970454,0.212901996963,+ 1.558931852983));+#7597 = LINE('',#7598,#7599);+#7598 = CARTESIAN_POINT('',(4.906413381704E-02,0.212901996963,+ 1.558931852983));+#7599 = VECTOR('',#7600,1.);+#7600 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7601 = ORIENTED_EDGE('',*,*,#7602,.F.);+#7602 = EDGE_CURVE('',#7603,#7595,#7605,.T.);+#7603 = VERTEX_POINT('',#7604);+#7604 = CARTESIAN_POINT('',(-0.108667970454,0.212901996963,+ 1.552977284328));+#7605 = LINE('',#7606,#7607);+#7606 = CARTESIAN_POINT('',(-0.108667970454,0.212901996963,+ 1.552977284328));+#7607 = VECTOR('',#7608,1.);+#7608 = DIRECTION('',(0.,0.,1.));+#7609 = ORIENTED_EDGE('',*,*,#7610,.F.);+#7610 = EDGE_CURVE('',#7572,#7603,#7611,.T.);+#7611 = LINE('',#7612,#7613);+#7612 = CARTESIAN_POINT('',(4.906413381704E-02,0.212901996963,+ 1.552977284328));+#7613 = VECTOR('',#7614,1.);+#7614 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7615 = PLANE('',#7616);+#7616 = AXIS2_PLACEMENT_3D('',#7617,#7618,#7619);+#7617 = CARTESIAN_POINT('',(4.906413381704E-02,0.212901996963,+ 1.552977284328));+#7618 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7619 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7620 = ADVANCED_FACE('',(#7621),#7646,.T.);+#7621 = FACE_BOUND('',#7622,.T.);+#7622 = EDGE_LOOP('',(#7623,#7624,#7632,#7640));+#7623 = ORIENTED_EDGE('',*,*,#7602,.T.);+#7624 = ORIENTED_EDGE('',*,*,#7625,.T.);+#7625 = EDGE_CURVE('',#7595,#7626,#7628,.T.);+#7626 = VERTEX_POINT('',#7627);+#7627 = CARTESIAN_POINT('',(-0.108667970454,0.250699551904,+ 1.558931852983));+#7628 = LINE('',#7629,#7630);+#7629 = CARTESIAN_POINT('',(-0.108667970454,0.212901996963,+ 1.558931852983));+#7630 = VECTOR('',#7631,1.);+#7631 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7632 = ORIENTED_EDGE('',*,*,#7633,.F.);+#7633 = EDGE_CURVE('',#7634,#7626,#7636,.T.);+#7634 = VERTEX_POINT('',#7635);+#7635 = CARTESIAN_POINT('',(-0.108667970454,0.250699551904,+ 1.552977284328));+#7636 = LINE('',#7637,#7638);+#7637 = CARTESIAN_POINT('',(-0.108667970454,0.250699551904,+ 1.552977284328));+#7638 = VECTOR('',#7639,1.);+#7639 = DIRECTION('',(0.,0.,1.));+#7640 = ORIENTED_EDGE('',*,*,#7641,.F.);+#7641 = EDGE_CURVE('',#7603,#7634,#7642,.T.);+#7642 = LINE('',#7643,#7644);+#7643 = CARTESIAN_POINT('',(-0.108667970454,0.212901996963,+ 1.552977284328));+#7644 = VECTOR('',#7645,1.);+#7645 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7646 = PLANE('',#7647);+#7647 = AXIS2_PLACEMENT_3D('',#7648,#7649,#7650);+#7648 = CARTESIAN_POINT('',(-0.108667970454,0.212901996963,+ 1.552977284328));+#7649 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7650 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7651 = ADVANCED_FACE('',(#7652),#7677,.T.);+#7652 = FACE_BOUND('',#7653,.T.);+#7653 = EDGE_LOOP('',(#7654,#7655,#7663,#7671));+#7654 = ORIENTED_EDGE('',*,*,#7633,.T.);+#7655 = ORIENTED_EDGE('',*,*,#7656,.T.);+#7656 = EDGE_CURVE('',#7626,#7657,#7659,.T.);+#7657 = VERTEX_POINT('',#7658);+#7658 = CARTESIAN_POINT('',(0.108377220031,0.250699551904,1.558931852983+ ));+#7659 = LINE('',#7660,#7661);+#7660 = CARTESIAN_POINT('',(-0.108667970454,0.250699551904,+ 1.558931852983));+#7661 = VECTOR('',#7662,1.);+#7662 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#7663 = ORIENTED_EDGE('',*,*,#7664,.F.);+#7664 = EDGE_CURVE('',#7665,#7657,#7667,.T.);+#7665 = VERTEX_POINT('',#7666);+#7666 = CARTESIAN_POINT('',(0.108377220031,0.250699551904,1.552977284328+ ));+#7667 = LINE('',#7668,#7669);+#7668 = CARTESIAN_POINT('',(0.108377220031,0.250699551904,1.552977284328+ ));+#7669 = VECTOR('',#7670,1.);+#7670 = DIRECTION('',(0.,0.,1.));+#7671 = ORIENTED_EDGE('',*,*,#7672,.F.);+#7672 = EDGE_CURVE('',#7634,#7665,#7673,.T.);+#7673 = LINE('',#7674,#7675);+#7674 = CARTESIAN_POINT('',(-0.108667970454,0.250699551904,+ 1.552977284328));+#7675 = VECTOR('',#7676,1.);+#7676 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#7677 = PLANE('',#7678);+#7678 = AXIS2_PLACEMENT_3D('',#7679,#7680,#7681);+#7679 = CARTESIAN_POINT('',(-0.108667970454,0.250699551904,+ 1.552977284328));+#7680 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#7681 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#7682 = ADVANCED_FACE('',(#7683),#7708,.T.);+#7683 = FACE_BOUND('',#7684,.T.);+#7684 = EDGE_LOOP('',(#7685,#7686,#7694,#7702));+#7685 = ORIENTED_EDGE('',*,*,#7664,.T.);+#7686 = ORIENTED_EDGE('',*,*,#7687,.T.);+#7687 = EDGE_CURVE('',#7657,#7688,#7690,.T.);+#7688 = VERTEX_POINT('',#7689);+#7689 = CARTESIAN_POINT('',(0.108377220031,0.204906360341,1.558931852983+ ));+#7690 = LINE('',#7691,#7692);+#7691 = CARTESIAN_POINT('',(0.108377220031,0.250699551904,1.558931852983+ ));+#7692 = VECTOR('',#7693,1.);+#7693 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7694 = ORIENTED_EDGE('',*,*,#7695,.F.);+#7695 = EDGE_CURVE('',#7696,#7688,#7698,.T.);+#7696 = VERTEX_POINT('',#7697);+#7697 = CARTESIAN_POINT('',(0.108377220031,0.204906360341,1.552977284328+ ));+#7698 = LINE('',#7699,#7700);+#7699 = CARTESIAN_POINT('',(0.108377220031,0.204906360341,1.552977284328+ ));+#7700 = VECTOR('',#7701,1.);+#7701 = DIRECTION('',(0.,0.,1.));+#7702 = ORIENTED_EDGE('',*,*,#7703,.F.);+#7703 = EDGE_CURVE('',#7665,#7696,#7704,.T.);+#7704 = LINE('',#7705,#7706);+#7705 = CARTESIAN_POINT('',(0.108377220031,0.250699551904,1.552977284328+ ));+#7706 = VECTOR('',#7707,1.);+#7707 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7708 = PLANE('',#7709);+#7709 = AXIS2_PLACEMENT_3D('',#7710,#7711,#7712);+#7710 = CARTESIAN_POINT('',(0.108377220031,0.250699551904,1.552977284328+ ));+#7711 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#7712 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7713 = ADVANCED_FACE('',(#7714),#7739,.T.);+#7714 = FACE_BOUND('',#7715,.T.);+#7715 = EDGE_LOOP('',(#7716,#7717,#7725,#7733));+#7716 = ORIENTED_EDGE('',*,*,#7695,.T.);+#7717 = ORIENTED_EDGE('',*,*,#7718,.T.);+#7718 = EDGE_CURVE('',#7688,#7719,#7721,.T.);+#7719 = VERTEX_POINT('',#7720);+#7720 = CARTESIAN_POINT('',(-4.935488423965E-02,0.144139522014,+ 1.558931852983));+#7721 = LINE('',#7722,#7723);+#7722 = CARTESIAN_POINT('',(0.108377220031,0.204906360341,1.558931852983+ ));+#7723 = VECTOR('',#7724,1.);+#7724 = DIRECTION('',(-0.933145967716,-0.359497709221,0.));+#7725 = ORIENTED_EDGE('',*,*,#7726,.F.);+#7726 = EDGE_CURVE('',#7727,#7719,#7729,.T.);+#7727 = VERTEX_POINT('',#7728);+#7728 = CARTESIAN_POINT('',(-4.935488423965E-02,0.144139522014,+ 1.552977284328));+#7729 = LINE('',#7730,#7731);+#7730 = CARTESIAN_POINT('',(-4.935488423965E-02,0.144139522014,+ 1.552977284328));+#7731 = VECTOR('',#7732,1.);+#7732 = DIRECTION('',(0.,0.,1.));+#7733 = ORIENTED_EDGE('',*,*,#7734,.F.);+#7734 = EDGE_CURVE('',#7696,#7727,#7735,.T.);+#7735 = LINE('',#7736,#7737);+#7736 = CARTESIAN_POINT('',(0.108377220031,0.204906360341,1.552977284328+ ));+#7737 = VECTOR('',#7738,1.);+#7738 = DIRECTION('',(-0.933145967716,-0.359497709221,0.));+#7739 = PLANE('',#7740);+#7740 = AXIS2_PLACEMENT_3D('',#7741,#7742,#7743);+#7741 = CARTESIAN_POINT('',(0.108377220031,0.204906360341,1.552977284328+ ));+#7742 = DIRECTION('',(0.359497709221,-0.933145967716,0.));+#7743 = DIRECTION('',(-0.933145967716,-0.359497709221,0.));+#7744 = ADVANCED_FACE('',(#7745),#7770,.T.);+#7745 = FACE_BOUND('',#7746,.T.);+#7746 = EDGE_LOOP('',(#7747,#7748,#7756,#7764));+#7747 = ORIENTED_EDGE('',*,*,#7726,.T.);+#7748 = ORIENTED_EDGE('',*,*,#7749,.T.);+#7749 = EDGE_CURVE('',#7719,#7750,#7752,.T.);+#7750 = VERTEX_POINT('',#7751);+#7751 = CARTESIAN_POINT('',(0.108377220031,0.144139522014,1.558931852983+ ));+#7752 = LINE('',#7753,#7754);+#7753 = CARTESIAN_POINT('',(-4.935488423965E-02,0.144139522014,+ 1.558931852983));+#7754 = VECTOR('',#7755,1.);+#7755 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#7756 = ORIENTED_EDGE('',*,*,#7757,.F.);+#7757 = EDGE_CURVE('',#7758,#7750,#7760,.T.);+#7758 = VERTEX_POINT('',#7759);+#7759 = CARTESIAN_POINT('',(0.108377220031,0.144139522014,1.552977284328+ ));+#7760 = LINE('',#7761,#7762);+#7761 = CARTESIAN_POINT('',(0.108377220031,0.144139522014,1.552977284328+ ));+#7762 = VECTOR('',#7763,1.);+#7763 = DIRECTION('',(0.,0.,1.));+#7764 = ORIENTED_EDGE('',*,*,#7765,.F.);+#7765 = EDGE_CURVE('',#7727,#7758,#7766,.T.);+#7766 = LINE('',#7767,#7768);+#7767 = CARTESIAN_POINT('',(-4.935488423965E-02,0.144139522014,+ 1.552977284328));+#7768 = VECTOR('',#7769,1.);+#7769 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#7770 = PLANE('',#7771);+#7771 = AXIS2_PLACEMENT_3D('',#7772,#7773,#7774);+#7772 = CARTESIAN_POINT('',(-4.935488423965E-02,0.144139522014,+ 1.552977284328));+#7773 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#7774 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#7775 = ADVANCED_FACE('',(#7776),#7792,.T.);+#7776 = FACE_BOUND('',#7777,.T.);+#7777 = EDGE_LOOP('',(#7778,#7779,#7785,#7786));+#7778 = ORIENTED_EDGE('',*,*,#7757,.T.);+#7779 = ORIENTED_EDGE('',*,*,#7780,.T.);+#7780 = EDGE_CURVE('',#7750,#7494,#7781,.T.);+#7781 = LINE('',#7782,#7783);+#7782 = CARTESIAN_POINT('',(0.108377220031,0.144139522014,1.558931852983+ ));+#7783 = VECTOR('',#7784,1.);+#7784 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7785 = ORIENTED_EDGE('',*,*,#7491,.F.);+#7786 = ORIENTED_EDGE('',*,*,#7787,.F.);+#7787 = EDGE_CURVE('',#7758,#7492,#7788,.T.);+#7788 = LINE('',#7789,#7790);+#7789 = CARTESIAN_POINT('',(0.108377220031,0.144139522014,1.552977284328+ ));+#7790 = VECTOR('',#7791,1.);+#7791 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7792 = PLANE('',#7793);+#7793 = AXIS2_PLACEMENT_3D('',#7794,#7795,#7796);+#7794 = CARTESIAN_POINT('',(0.108377220031,0.144139522014,1.552977284328+ ));+#7795 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#7796 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7797 = ADVANCED_FACE('',(#7798),#7810,.F.);+#7798 = FACE_BOUND('',#7799,.T.);+#7799 = EDGE_LOOP('',(#7800,#7801,#7802,#7803,#7804,#7805,#7806,#7807,+ #7808,#7809));+#7800 = ORIENTED_EDGE('',*,*,#7517,.T.);+#7801 = ORIENTED_EDGE('',*,*,#7548,.T.);+#7802 = ORIENTED_EDGE('',*,*,#7579,.T.);+#7803 = ORIENTED_EDGE('',*,*,#7610,.T.);+#7804 = ORIENTED_EDGE('',*,*,#7641,.T.);+#7805 = ORIENTED_EDGE('',*,*,#7672,.T.);+#7806 = ORIENTED_EDGE('',*,*,#7703,.T.);+#7807 = ORIENTED_EDGE('',*,*,#7734,.T.);+#7808 = ORIENTED_EDGE('',*,*,#7765,.T.);+#7809 = ORIENTED_EDGE('',*,*,#7787,.T.);+#7810 = PLANE('',#7811);+#7811 = AXIS2_PLACEMENT_3D('',#7812,#7813,#7814);+#7812 = CARTESIAN_POINT('',(0.108377220031,8.904231692721E-02,+ 1.552977284328));+#7813 = DIRECTION('',(0.,0.,1.));+#7814 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7815 = ADVANCED_FACE('',(#7816),#7828,.T.);+#7816 = FACE_BOUND('',#7817,.F.);+#7817 = EDGE_LOOP('',(#7818,#7819,#7820,#7821,#7822,#7823,#7824,#7825,+ #7826,#7827));+#7818 = ORIENTED_EDGE('',*,*,#7501,.T.);+#7819 = ORIENTED_EDGE('',*,*,#7532,.T.);+#7820 = ORIENTED_EDGE('',*,*,#7563,.T.);+#7821 = ORIENTED_EDGE('',*,*,#7594,.T.);+#7822 = ORIENTED_EDGE('',*,*,#7625,.T.);+#7823 = ORIENTED_EDGE('',*,*,#7656,.T.);+#7824 = ORIENTED_EDGE('',*,*,#7687,.T.);+#7825 = ORIENTED_EDGE('',*,*,#7718,.T.);+#7826 = ORIENTED_EDGE('',*,*,#7749,.T.);+#7827 = ORIENTED_EDGE('',*,*,#7780,.T.);+#7828 = PLANE('',#7829);+#7829 = AXIS2_PLACEMENT_3D('',#7830,#7831,#7832);+#7830 = CARTESIAN_POINT('',(0.108377220031,8.904231692721E-02,+ 1.558931852983));+#7831 = DIRECTION('',(0.,0.,1.));+#7832 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7833 = MANIFOLD_SOLID_BREP('',#7834);+#7834 = CLOSED_SHELL('',(#7835,#7875,#7906,#7939,#7972,#8005,#8038,#8069+ ,#8100,#8122,#8162,#8193,#8224,#8257,#8290,#8323,#8347,#8373));+#7835 = ADVANCED_FACE('',(#7836),#7870,.T.);+#7836 = FACE_BOUND('',#7837,.T.);+#7837 = EDGE_LOOP('',(#7838,#7848,#7856,#7864));+#7838 = ORIENTED_EDGE('',*,*,#7839,.T.);+#7839 = EDGE_CURVE('',#7840,#7842,#7844,.T.);+#7840 = VERTEX_POINT('',#7841);+#7841 = CARTESIAN_POINT('',(0.108377220031,0.291840736704,1.552977284328+ ));+#7842 = VERTEX_POINT('',#7843);+#7843 = CARTESIAN_POINT('',(0.108377220031,0.291840736704,1.558931852983+ ));+#7844 = LINE('',#7845,#7846);+#7845 = CARTESIAN_POINT('',(0.108377220031,0.291840736704,1.552977284328+ ));+#7846 = VECTOR('',#7847,1.);+#7847 = DIRECTION('',(0.,0.,1.));+#7848 = ORIENTED_EDGE('',*,*,#7849,.T.);+#7849 = EDGE_CURVE('',#7842,#7850,#7852,.T.);+#7850 = VERTEX_POINT('',#7851);+#7851 = CARTESIAN_POINT('',(-0.108667970454,0.291840736704,+ 1.558931852983));+#7852 = LINE('',#7853,#7854);+#7853 = CARTESIAN_POINT('',(0.108377220031,0.291840736704,1.558931852983+ ));+#7854 = VECTOR('',#7855,1.);+#7855 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7856 = ORIENTED_EDGE('',*,*,#7857,.F.);+#7857 = EDGE_CURVE('',#7858,#7850,#7860,.T.);+#7858 = VERTEX_POINT('',#7859);+#7859 = CARTESIAN_POINT('',(-0.108667970454,0.291840736704,+ 1.552977284328));+#7860 = LINE('',#7861,#7862);+#7861 = CARTESIAN_POINT('',(-0.108667970454,0.291840736704,+ 1.552977284328));+#7862 = VECTOR('',#7863,1.);+#7863 = DIRECTION('',(0.,0.,1.));+#7864 = ORIENTED_EDGE('',*,*,#7865,.F.);+#7865 = EDGE_CURVE('',#7840,#7858,#7866,.T.);+#7866 = LINE('',#7867,#7868);+#7867 = CARTESIAN_POINT('',(0.108377220031,0.291840736704,1.552977284328+ ));+#7868 = VECTOR('',#7869,1.);+#7869 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7870 = PLANE('',#7871);+#7871 = AXIS2_PLACEMENT_3D('',#7872,#7873,#7874);+#7872 = CARTESIAN_POINT('',(0.108377220031,0.291840736704,1.552977284328+ ));+#7873 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7874 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7875 = ADVANCED_FACE('',(#7876),#7901,.T.);+#7876 = FACE_BOUND('',#7877,.T.);+#7877 = EDGE_LOOP('',(#7878,#7879,#7887,#7895));+#7878 = ORIENTED_EDGE('',*,*,#7857,.T.);+#7879 = ORIENTED_EDGE('',*,*,#7880,.T.);+#7880 = EDGE_CURVE('',#7850,#7881,#7883,.T.);+#7881 = VERTEX_POINT('',#7882);+#7882 = CARTESIAN_POINT('',(-0.108667970454,0.350717697285,+ 1.558931852983));+#7883 = LINE('',#7884,#7885);+#7884 = CARTESIAN_POINT('',(-0.108667970454,0.291840736704,+ 1.558931852983));+#7885 = VECTOR('',#7886,1.);+#7886 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7887 = ORIENTED_EDGE('',*,*,#7888,.F.);+#7888 = EDGE_CURVE('',#7889,#7881,#7891,.T.);+#7889 = VERTEX_POINT('',#7890);+#7890 = CARTESIAN_POINT('',(-0.108667970454,0.350717697285,+ 1.552977284328));+#7891 = LINE('',#7892,#7893);+#7892 = CARTESIAN_POINT('',(-0.108667970454,0.350717697285,+ 1.552977284328));+#7893 = VECTOR('',#7894,1.);+#7894 = DIRECTION('',(0.,0.,1.));+#7895 = ORIENTED_EDGE('',*,*,#7896,.F.);+#7896 = EDGE_CURVE('',#7858,#7889,#7897,.T.);+#7897 = LINE('',#7898,#7899);+#7898 = CARTESIAN_POINT('',(-0.108667970454,0.291840736704,+ 1.552977284328));+#7899 = VECTOR('',#7900,1.);+#7900 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7901 = PLANE('',#7902);+#7902 = AXIS2_PLACEMENT_3D('',#7903,#7904,#7905);+#7903 = CARTESIAN_POINT('',(-0.108667970454,0.291840736704,+ 1.552977284328));+#7904 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#7905 = DIRECTION('',(1.110223024625E-16,1.,0.));+#7906 = ADVANCED_FACE('',(#7907),#7932,.T.);+#7907 = FACE_BOUND('',#7908,.T.);+#7908 = EDGE_LOOP('',(#7909,#7910,#7918,#7926));+#7909 = ORIENTED_EDGE('',*,*,#7888,.T.);+#7910 = ORIENTED_EDGE('',*,*,#7911,.T.);+#7911 = EDGE_CURVE('',#7881,#7912,#7914,.T.);+#7912 = VERTEX_POINT('',#7913);+#7913 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.558931852983));+#7914 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7915,#7916,#7917),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7915 = CARTESIAN_POINT('',(-0.108667970454,0.350717697285,+ 1.558931852983));+#7916 = CARTESIAN_POINT('',(-0.108667970454,0.395638637579,+ 1.558931852983));+#7917 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.558931852983));+#7918 = ORIENTED_EDGE('',*,*,#7919,.F.);+#7919 = EDGE_CURVE('',#7920,#7912,#7922,.T.);+#7920 = VERTEX_POINT('',#7921);+#7921 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.552977284328));+#7922 = LINE('',#7923,#7924);+#7923 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.552977284328));+#7924 = VECTOR('',#7925,1.);+#7925 = DIRECTION('',(0.,0.,1.));+#7926 = ORIENTED_EDGE('',*,*,#7927,.F.);+#7927 = EDGE_CURVE('',#7889,#7920,#7928,.T.);+#7928 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7929,#7930,#7931),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7929 = CARTESIAN_POINT('',(-0.108667970454,0.350717697285,+ 1.552977284328));+#7930 = CARTESIAN_POINT('',(-0.108667970454,0.395638637579,+ 1.552977284328));+#7931 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.552977284328));+#7932 = SURFACE_OF_LINEAR_EXTRUSION('',#7933,#7937);+#7933 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7934,#7935,#7936),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7934 = CARTESIAN_POINT('',(-0.108667970454,0.350717697285,+ 1.552977284328));+#7935 = CARTESIAN_POINT('',(-0.108667970454,0.395638637579,+ 1.552977284328));+#7936 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.552977284328));+#7937 = VECTOR('',#7938,1.);+#7938 = DIRECTION('',(-0.,-0.,-1.));+#7939 = ADVANCED_FACE('',(#7940),#7965,.T.);+#7940 = FACE_BOUND('',#7941,.T.);+#7941 = EDGE_LOOP('',(#7942,#7943,#7951,#7959));+#7942 = ORIENTED_EDGE('',*,*,#7919,.T.);+#7943 = ORIENTED_EDGE('',*,*,#7944,.T.);+#7944 = EDGE_CURVE('',#7912,#7945,#7947,.T.);+#7945 = VERTEX_POINT('',#7946);+#7946 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.558931852983));+#7947 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7948,#7949,#7950),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7948 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.558931852983));+#7949 = CARTESIAN_POINT('',(-7.668542396588E-02,0.435035319844,+ 1.558931852983));+#7950 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.558931852983));+#7951 = ORIENTED_EDGE('',*,*,#7952,.F.);+#7952 = EDGE_CURVE('',#7953,#7945,#7955,.T.);+#7953 = VERTEX_POINT('',#7954);+#7954 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.552977284328));+#7955 = LINE('',#7956,#7957);+#7956 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.552977284328));+#7957 = VECTOR('',#7958,1.);+#7958 = DIRECTION('',(0.,0.,1.));+#7959 = ORIENTED_EDGE('',*,*,#7960,.F.);+#7960 = EDGE_CURVE('',#7920,#7953,#7961,.T.);+#7961 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7962,#7963,#7964),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7962 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.552977284328));+#7963 = CARTESIAN_POINT('',(-7.668542396588E-02,0.435035319844,+ 1.552977284328));+#7964 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.552977284328));+#7965 = SURFACE_OF_LINEAR_EXTRUSION('',#7966,#7970);+#7966 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7967,#7968,#7969),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7967 = CARTESIAN_POINT('',(-9.267669720995E-02,0.415336978712,+ 1.552977284328));+#7968 = CARTESIAN_POINT('',(-7.668542396588E-02,0.435035319844,+ 1.552977284328));+#7969 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.552977284328));+#7970 = VECTOR('',#7971,1.);+#7971 = DIRECTION('',(-0.,-0.,-1.));+#7972 = ADVANCED_FACE('',(#7973),#7998,.T.);+#7973 = FACE_BOUND('',#7974,.T.);+#7974 = EDGE_LOOP('',(#7975,#7976,#7984,#7992));+#7975 = ORIENTED_EDGE('',*,*,#7952,.T.);+#7976 = ORIENTED_EDGE('',*,*,#7977,.T.);+#7977 = EDGE_CURVE('',#7945,#7978,#7980,.T.);+#7978 = VERTEX_POINT('',#7979);+#7979 = CARTESIAN_POINT('',(1.112120366519E-02,0.415336978712,+ 1.558931852983));+#7980 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7981,#7982,#7983),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7981 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.558931852983));+#7982 = CARTESIAN_POINT('',(-4.870069578875E-03,0.435035319844,+ 1.558931852983));+#7983 = CARTESIAN_POINT('',(1.11212036652E-02,0.415336978712,+ 1.558931852983));+#7984 = ORIENTED_EDGE('',*,*,#7985,.F.);+#7985 = EDGE_CURVE('',#7986,#7978,#7988,.T.);+#7986 = VERTEX_POINT('',#7987);+#7987 = CARTESIAN_POINT('',(1.112120366519E-02,0.415336978712,+ 1.552977284328));+#7988 = LINE('',#7989,#7990);+#7989 = CARTESIAN_POINT('',(1.112120366519E-02,0.415336978712,+ 1.552977284328));+#7990 = VECTOR('',#7991,1.);+#7991 = DIRECTION('',(0.,0.,1.));+#7992 = ORIENTED_EDGE('',*,*,#7993,.F.);+#7993 = EDGE_CURVE('',#7953,#7986,#7994,.T.);+#7994 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7995,#7996,#7997),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7995 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.552977284328));+#7996 = CARTESIAN_POINT('',(-4.870069578875E-03,0.435035319844,+ 1.552977284328));+#7997 = CARTESIAN_POINT('',(1.11212036652E-02,0.415336978712,+ 1.552977284328));+#7998 = SURFACE_OF_LINEAR_EXTRUSION('',#7999,#8003);+#7999 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8000,#8001,#8002),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8000 = CARTESIAN_POINT('',(-4.077774677238E-02,0.435035319844,+ 1.552977284328));+#8001 = CARTESIAN_POINT('',(-4.870069578875E-03,0.435035319844,+ 1.552977284328));+#8002 = CARTESIAN_POINT('',(1.11212036652E-02,0.415336978712,+ 1.552977284328));+#8003 = VECTOR('',#8004,1.);+#8004 = DIRECTION('',(-0.,-0.,-1.));+#8005 = ADVANCED_FACE('',(#8006),#8031,.T.);+#8006 = FACE_BOUND('',#8007,.T.);+#8007 = EDGE_LOOP('',(#8008,#8009,#8017,#8025));+#8008 = ORIENTED_EDGE('',*,*,#7985,.T.);+#8009 = ORIENTED_EDGE('',*,*,#8010,.T.);+#8010 = EDGE_CURVE('',#7978,#8011,#8013,.T.);+#8011 = VERTEX_POINT('',#8012);+#8012 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.558931852983));+#8013 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8014,#8015,#8016),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8014 = CARTESIAN_POINT('',(1.11212036652E-02,0.415336978712,+ 1.558931852983));+#8015 = CARTESIAN_POINT('',(2.711247690927E-02,0.395638637579,+ 1.558931852983));+#8016 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.558931852983));+#8017 = ORIENTED_EDGE('',*,*,#8018,.F.);+#8018 = EDGE_CURVE('',#8019,#8011,#8021,.T.);+#8019 = VERTEX_POINT('',#8020);+#8020 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.552977284328));+#8021 = LINE('',#8022,#8023);+#8022 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.552977284328));+#8023 = VECTOR('',#8024,1.);+#8024 = DIRECTION('',(0.,0.,1.));+#8025 = ORIENTED_EDGE('',*,*,#8026,.F.);+#8026 = EDGE_CURVE('',#7986,#8019,#8027,.T.);+#8027 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8028,#8029,#8030),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8028 = CARTESIAN_POINT('',(1.11212036652E-02,0.415336978712,+ 1.552977284328));+#8029 = CARTESIAN_POINT('',(2.711247690927E-02,0.395638637579,+ 1.552977284328));+#8030 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.552977284328));+#8031 = SURFACE_OF_LINEAR_EXTRUSION('',#8032,#8036);+#8032 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8033,#8034,#8035),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8033 = CARTESIAN_POINT('',(1.11212036652E-02,0.415336978712,+ 1.552977284328));+#8034 = CARTESIAN_POINT('',(2.711247690927E-02,0.395638637579,+ 1.552977284328));+#8035 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.552977284328));+#8036 = VECTOR('',#8037,1.);+#8037 = DIRECTION('',(-0.,-0.,-1.));+#8038 = ADVANCED_FACE('',(#8039),#8064,.T.);+#8039 = FACE_BOUND('',#8040,.T.);+#8040 = EDGE_LOOP('',(#8041,#8042,#8050,#8058));+#8041 = ORIENTED_EDGE('',*,*,#8018,.T.);+#8042 = ORIENTED_EDGE('',*,*,#8043,.T.);+#8043 = EDGE_CURVE('',#8011,#8044,#8046,.T.);+#8044 = VERTEX_POINT('',#8045);+#8045 = CARTESIAN_POINT('',(2.711247690927E-02,0.334726424041,+ 1.558931852983));+#8046 = LINE('',#8047,#8048);+#8047 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.558931852983));+#8048 = VECTOR('',#8049,1.);+#8049 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8050 = ORIENTED_EDGE('',*,*,#8051,.F.);+#8051 = EDGE_CURVE('',#8052,#8044,#8054,.T.);+#8052 = VERTEX_POINT('',#8053);+#8053 = CARTESIAN_POINT('',(2.711247690927E-02,0.334726424041,+ 1.552977284328));+#8054 = LINE('',#8055,#8056);+#8055 = CARTESIAN_POINT('',(2.711247690927E-02,0.334726424041,+ 1.552977284328));+#8056 = VECTOR('',#8057,1.);+#8057 = DIRECTION('',(0.,0.,1.));+#8058 = ORIENTED_EDGE('',*,*,#8059,.F.);+#8059 = EDGE_CURVE('',#8019,#8052,#8060,.T.);+#8060 = LINE('',#8061,#8062);+#8061 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.552977284328));+#8062 = VECTOR('',#8063,1.);+#8063 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8064 = PLANE('',#8065);+#8065 = AXIS2_PLACEMENT_3D('',#8066,#8067,#8068);+#8066 = CARTESIAN_POINT('',(2.711247690927E-02,0.350717697285,+ 1.552977284328));+#8067 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8068 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8069 = ADVANCED_FACE('',(#8070),#8095,.T.);+#8070 = FACE_BOUND('',#8071,.T.);+#8071 = EDGE_LOOP('',(#8072,#8073,#8081,#8089));+#8072 = ORIENTED_EDGE('',*,*,#8051,.T.);+#8073 = ORIENTED_EDGE('',*,*,#8074,.T.);+#8074 = EDGE_CURVE('',#8044,#8075,#8077,.T.);+#8075 = VERTEX_POINT('',#8076);+#8076 = CARTESIAN_POINT('',(0.108377220031,0.334726424041,1.558931852983+ ));+#8077 = LINE('',#8078,#8079);+#8078 = CARTESIAN_POINT('',(2.711247690927E-02,0.334726424041,+ 1.558931852983));+#8079 = VECTOR('',#8080,1.);+#8080 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8081 = ORIENTED_EDGE('',*,*,#8082,.F.);+#8082 = EDGE_CURVE('',#8083,#8075,#8085,.T.);+#8083 = VERTEX_POINT('',#8084);+#8084 = CARTESIAN_POINT('',(0.108377220031,0.334726424041,1.552977284328+ ));+#8085 = LINE('',#8086,#8087);+#8086 = CARTESIAN_POINT('',(0.108377220031,0.334726424041,1.552977284328+ ));+#8087 = VECTOR('',#8088,1.);+#8088 = DIRECTION('',(0.,0.,1.));+#8089 = ORIENTED_EDGE('',*,*,#8090,.F.);+#8090 = EDGE_CURVE('',#8052,#8083,#8091,.T.);+#8091 = LINE('',#8092,#8093);+#8092 = CARTESIAN_POINT('',(2.711247690927E-02,0.334726424041,+ 1.552977284328));+#8093 = VECTOR('',#8094,1.);+#8094 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8095 = PLANE('',#8096);+#8096 = AXIS2_PLACEMENT_3D('',#8097,#8098,#8099);+#8097 = CARTESIAN_POINT('',(2.711247690927E-02,0.334726424041,+ 1.552977284328));+#8098 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#8099 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8100 = ADVANCED_FACE('',(#8101),#8117,.T.);+#8101 = FACE_BOUND('',#8102,.T.);+#8102 = EDGE_LOOP('',(#8103,#8104,#8110,#8111));+#8103 = ORIENTED_EDGE('',*,*,#8082,.T.);+#8104 = ORIENTED_EDGE('',*,*,#8105,.T.);+#8105 = EDGE_CURVE('',#8075,#7842,#8106,.T.);+#8106 = LINE('',#8107,#8108);+#8107 = CARTESIAN_POINT('',(0.108377220031,0.334726424041,1.558931852983+ ));+#8108 = VECTOR('',#8109,1.);+#8109 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8110 = ORIENTED_EDGE('',*,*,#7839,.F.);+#8111 = ORIENTED_EDGE('',*,*,#8112,.F.);+#8112 = EDGE_CURVE('',#8083,#7840,#8113,.T.);+#8113 = LINE('',#8114,#8115);+#8114 = CARTESIAN_POINT('',(0.108377220031,0.334726424041,1.552977284328+ ));+#8115 = VECTOR('',#8116,1.);+#8116 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8117 = PLANE('',#8118);+#8118 = AXIS2_PLACEMENT_3D('',#8119,#8120,#8121);+#8119 = CARTESIAN_POINT('',(0.108377220031,0.334726424041,1.552977284328+ ));+#8120 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8121 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8122 = ADVANCED_FACE('',(#8123),#8157,.T.);+#8123 = FACE_BOUND('',#8124,.T.);+#8124 = EDGE_LOOP('',(#8125,#8135,#8143,#8151));+#8125 = ORIENTED_EDGE('',*,*,#8126,.T.);+#8126 = EDGE_CURVE('',#8127,#8129,#8131,.T.);+#8127 = VERTEX_POINT('',#8128);+#8128 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.552977284328));+#8129 = VERTEX_POINT('',#8130);+#8130 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.558931852983));+#8131 = LINE('',#8132,#8133);+#8132 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.552977284328));+#8133 = VECTOR('',#8134,1.);+#8134 = DIRECTION('',(0.,0.,1.));+#8135 = ORIENTED_EDGE('',*,*,#8136,.T.);+#8136 = EDGE_CURVE('',#8129,#8137,#8139,.T.);+#8137 = VERTEX_POINT('',#8138);+#8138 = CARTESIAN_POINT('',(-7.261491804921E-02,0.334726424041,+ 1.558931852983));+#8139 = LINE('',#8140,#8141);+#8140 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.558931852983));+#8141 = VECTOR('',#8142,1.);+#8142 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8143 = ORIENTED_EDGE('',*,*,#8144,.F.);+#8144 = EDGE_CURVE('',#8145,#8137,#8147,.T.);+#8145 = VERTEX_POINT('',#8146);+#8146 = CARTESIAN_POINT('',(-7.261491804921E-02,0.334726424041,+ 1.552977284328));+#8147 = LINE('',#8148,#8149);+#8148 = CARTESIAN_POINT('',(-7.261491804921E-02,0.334726424041,+ 1.552977284328));+#8149 = VECTOR('',#8150,1.);+#8150 = DIRECTION('',(0.,0.,1.));+#8151 = ORIENTED_EDGE('',*,*,#8152,.F.);+#8152 = EDGE_CURVE('',#8127,#8145,#8153,.T.);+#8153 = LINE('',#8154,#8155);+#8154 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.552977284328));+#8155 = VECTOR('',#8156,1.);+#8156 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8157 = PLANE('',#8158);+#8158 = AXIS2_PLACEMENT_3D('',#8159,#8160,#8161);+#8159 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.552977284328));+#8160 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8161 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8162 = ADVANCED_FACE('',(#8163),#8188,.T.);+#8163 = FACE_BOUND('',#8164,.T.);+#8164 = EDGE_LOOP('',(#8165,#8166,#8174,#8182));+#8165 = ORIENTED_EDGE('',*,*,#8144,.T.);+#8166 = ORIENTED_EDGE('',*,*,#8167,.T.);+#8167 = EDGE_CURVE('',#8137,#8168,#8170,.T.);+#8168 = VERTEX_POINT('',#8169);+#8169 = CARTESIAN_POINT('',(-8.940575495549E-03,0.334726424041,+ 1.558931852983));+#8170 = LINE('',#8171,#8172);+#8171 = CARTESIAN_POINT('',(-7.261491804921E-02,0.334726424041,+ 1.558931852983));+#8172 = VECTOR('',#8173,1.);+#8173 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8174 = ORIENTED_EDGE('',*,*,#8175,.F.);+#8175 = EDGE_CURVE('',#8176,#8168,#8178,.T.);+#8176 = VERTEX_POINT('',#8177);+#8177 = CARTESIAN_POINT('',(-8.940575495549E-03,0.334726424041,+ 1.552977284328));+#8178 = LINE('',#8179,#8180);+#8179 = CARTESIAN_POINT('',(-8.940575495549E-03,0.334726424041,+ 1.552977284328));+#8180 = VECTOR('',#8181,1.);+#8181 = DIRECTION('',(0.,0.,1.));+#8182 = ORIENTED_EDGE('',*,*,#8183,.F.);+#8183 = EDGE_CURVE('',#8145,#8176,#8184,.T.);+#8184 = LINE('',#8185,#8186);+#8185 = CARTESIAN_POINT('',(-7.261491804921E-02,0.334726424041,+ 1.552977284328));+#8186 = VECTOR('',#8187,1.);+#8187 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8188 = PLANE('',#8189);+#8189 = AXIS2_PLACEMENT_3D('',#8190,#8191,#8192);+#8190 = CARTESIAN_POINT('',(-7.261491804921E-02,0.334726424041,+ 1.552977284328));+#8191 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#8192 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8193 = ADVANCED_FACE('',(#8194),#8219,.T.);+#8194 = FACE_BOUND('',#8195,.T.);+#8195 = EDGE_LOOP('',(#8196,#8197,#8205,#8213));+#8196 = ORIENTED_EDGE('',*,*,#8175,.T.);+#8197 = ORIENTED_EDGE('',*,*,#8198,.T.);+#8198 = EDGE_CURVE('',#8168,#8199,#8201,.T.);+#8199 = VERTEX_POINT('',#8200);+#8200 = CARTESIAN_POINT('',(-8.940575495549E-03,0.352316824609,+ 1.558931852983));+#8201 = LINE('',#8202,#8203);+#8202 = CARTESIAN_POINT('',(-8.940575495548E-03,0.334726424041,+ 1.558931852983));+#8203 = VECTOR('',#8204,1.);+#8204 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8205 = ORIENTED_EDGE('',*,*,#8206,.F.);+#8206 = EDGE_CURVE('',#8207,#8199,#8209,.T.);+#8207 = VERTEX_POINT('',#8208);+#8208 = CARTESIAN_POINT('',(-8.940575495549E-03,0.352316824609,+ 1.552977284328));+#8209 = LINE('',#8210,#8211);+#8210 = CARTESIAN_POINT('',(-8.940575495549E-03,0.352316824609,+ 1.552977284328));+#8211 = VECTOR('',#8212,1.);+#8212 = DIRECTION('',(0.,0.,1.));+#8213 = ORIENTED_EDGE('',*,*,#8214,.F.);+#8214 = EDGE_CURVE('',#8176,#8207,#8215,.T.);+#8215 = LINE('',#8216,#8217);+#8216 = CARTESIAN_POINT('',(-8.940575495548E-03,0.334726424041,+ 1.552977284328));+#8217 = VECTOR('',#8218,1.);+#8218 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8219 = PLANE('',#8220);+#8220 = AXIS2_PLACEMENT_3D('',#8221,#8222,#8223);+#8221 = CARTESIAN_POINT('',(-8.940575495548E-03,0.334726424041,+ 1.552977284328));+#8222 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#8223 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8224 = ADVANCED_FACE('',(#8225),#8250,.T.);+#8225 = FACE_BOUND('',#8226,.T.);+#8226 = EDGE_LOOP('',(#8227,#8228,#8236,#8244));+#8227 = ORIENTED_EDGE('',*,*,#8206,.T.);+#8228 = ORIENTED_EDGE('',*,*,#8229,.T.);+#8229 = EDGE_CURVE('',#8199,#8230,#8232,.T.);+#8230 = VERTEX_POINT('',#8231);+#8231 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.558931852983));+#8232 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8233,#8234,#8235),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8233 = CARTESIAN_POINT('',(-8.940575495548E-03,0.352316824609,+ 1.558931852983));+#8234 = CARTESIAN_POINT('',(-8.940575495548E-03,0.373396230249,+ 1.558931852983));+#8235 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.558931852983));+#8236 = ORIENTED_EDGE('',*,*,#8237,.F.);+#8237 = EDGE_CURVE('',#8238,#8230,#8240,.T.);+#8238 = VERTEX_POINT('',#8239);+#8239 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.552977284328));+#8240 = LINE('',#8241,#8242);+#8241 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.552977284328));+#8242 = VECTOR('',#8243,1.);+#8243 = DIRECTION('',(0.,0.,1.));+#8244 = ORIENTED_EDGE('',*,*,#8245,.F.);+#8245 = EDGE_CURVE('',#8207,#8238,#8246,.T.);+#8246 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8247,#8248,#8249),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8247 = CARTESIAN_POINT('',(-8.940575495548E-03,0.352316824609,+ 1.552977284328));+#8248 = CARTESIAN_POINT('',(-8.940575495548E-03,0.373396230249,+ 1.552977284328));+#8249 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.552977284328));+#8250 = SURFACE_OF_LINEAR_EXTRUSION('',#8251,#8255);+#8251 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8252,#8253,#8254),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8252 = CARTESIAN_POINT('',(-8.940575495548E-03,0.352316824609,+ 1.552977284328));+#8253 = CARTESIAN_POINT('',(-8.940575495548E-03,0.373396230249,+ 1.552977284328));+#8254 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.552977284328));+#8255 = VECTOR('',#8256,1.);+#8256 = DIRECTION('',(-0.,-0.,-1.));+#8257 = ADVANCED_FACE('',(#8258),#8283,.T.);+#8258 = FACE_BOUND('',#8259,.T.);+#8259 = EDGE_LOOP('',(#8260,#8261,#8269,#8277));+#8260 = ORIENTED_EDGE('',*,*,#8237,.T.);+#8261 = ORIENTED_EDGE('',*,*,#8262,.T.);+#8262 = EDGE_CURVE('',#8230,#8263,#8265,.T.);+#8263 = VERTEX_POINT('',#8264);+#8264 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.558931852983));+#8265 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8266,#8267,#8268),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8266 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.558931852983));+#8267 = CARTESIAN_POINT('',(-2.31873462039E-02,0.390405129972,+ 1.558931852983));+#8268 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.558931852983));+#8269 = ORIENTED_EDGE('',*,*,#8270,.F.);+#8270 = EDGE_CURVE('',#8271,#8263,#8273,.T.);+#8271 = VERTEX_POINT('',#8272);+#8272 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.552977284328));+#8273 = LINE('',#8274,#8275);+#8274 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.552977284328));+#8275 = VECTOR('',#8276,1.);+#8276 = DIRECTION('',(0.,0.,1.));+#8277 = ORIENTED_EDGE('',*,*,#8278,.F.);+#8278 = EDGE_CURVE('',#8238,#8271,#8279,.T.);+#8279 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8280,#8281,#8282),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8280 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.552977284328));+#8281 = CARTESIAN_POINT('',(-2.31873462039E-02,0.390405129972,+ 1.552977284328));+#8282 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.552977284328));+#8283 = SURFACE_OF_LINEAR_EXTRUSION('',#8284,#8288);+#8284 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8285,#8286,#8287),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8285 = CARTESIAN_POINT('',(-1.606396084973E-02,0.381900680111,+ 1.552977284328));+#8286 = CARTESIAN_POINT('',(-2.31873462039E-02,0.390405129972,+ 1.552977284328));+#8287 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.552977284328));+#8288 = VECTOR('',#8289,1.);+#8289 = DIRECTION('',(-0.,-0.,-1.));+#8290 = ADVANCED_FACE('',(#8291),#8316,.T.);+#8291 = FACE_BOUND('',#8292,.T.);+#8292 = EDGE_LOOP('',(#8293,#8294,#8302,#8310));+#8293 = ORIENTED_EDGE('',*,*,#8270,.T.);+#8294 = ORIENTED_EDGE('',*,*,#8295,.T.);+#8295 = EDGE_CURVE('',#8263,#8296,#8298,.T.);+#8296 = VERTEX_POINT('',#8297);+#8297 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.558931852983));+#8298 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8299,#8300,#8301),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8299 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.558931852983));+#8300 = CARTESIAN_POINT('',(-5.836814734086E-02,0.390405129972,+ 1.558931852983));+#8301 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.558931852983));+#8302 = ORIENTED_EDGE('',*,*,#8303,.F.);+#8303 = EDGE_CURVE('',#8304,#8296,#8306,.T.);+#8304 = VERTEX_POINT('',#8305);+#8305 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.552977284328));+#8306 = LINE('',#8307,#8308);+#8307 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.552977284328));+#8308 = VECTOR('',#8309,1.);+#8309 = DIRECTION('',(0.,0.,1.));+#8310 = ORIENTED_EDGE('',*,*,#8311,.F.);+#8311 = EDGE_CURVE('',#8271,#8304,#8312,.T.);+#8312 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8313,#8314,#8315),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8313 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.552977284328));+#8314 = CARTESIAN_POINT('',(-5.836814734086E-02,0.390405129972,+ 1.552977284328));+#8315 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.552977284328));+#8316 = SURFACE_OF_LINEAR_EXTRUSION('',#8317,#8321);+#8317 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8318,#8319,#8320),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8318 = CARTESIAN_POINT('',(-4.077774677238E-02,0.390405129972,+ 1.552977284328));+#8319 = CARTESIAN_POINT('',(-5.836814734086E-02,0.390405129972,+ 1.552977284328));+#8320 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.552977284328));+#8321 = VECTOR('',#8322,1.);+#8322 = DIRECTION('',(-0.,-0.,-1.));+#8323 = ADVANCED_FACE('',(#8324),#8340,.T.);+#8324 = FACE_BOUND('',#8325,.T.);+#8325 = EDGE_LOOP('',(#8326,#8327,#8333,#8334));+#8326 = ORIENTED_EDGE('',*,*,#8303,.T.);+#8327 = ORIENTED_EDGE('',*,*,#8328,.T.);+#8328 = EDGE_CURVE('',#8296,#8129,#8329,.T.);+#8329 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8330,#8331,#8332),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8330 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.558931852983));+#8331 = CARTESIAN_POINT('',(-7.261491804921E-02,0.373396230249,+ 1.558931852983));+#8332 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.558931852983));+#8333 = ORIENTED_EDGE('',*,*,#8126,.F.);+#8334 = ORIENTED_EDGE('',*,*,#8335,.F.);+#8335 = EDGE_CURVE('',#8304,#8127,#8336,.T.);+#8336 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8337,#8338,#8339),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8337 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.552977284328));+#8338 = CARTESIAN_POINT('',(-7.261491804921E-02,0.373396230249,+ 1.552977284328));+#8339 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.552977284328));+#8340 = SURFACE_OF_LINEAR_EXTRUSION('',#8341,#8345);+#8341 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8342,#8343,#8344),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8342 = CARTESIAN_POINT('',(-6.549153269503E-02,0.381900680111,+ 1.552977284328));+#8343 = CARTESIAN_POINT('',(-7.261491804921E-02,0.373396230249,+ 1.552977284328));+#8344 = CARTESIAN_POINT('',(-7.261491804921E-02,0.352316824609,+ 1.552977284328));+#8345 = VECTOR('',#8346,1.);+#8346 = DIRECTION('',(-0.,-0.,-1.));+#8347 = ADVANCED_FACE('',(#8348,#8359),#8368,.F.);+#8348 = FACE_BOUND('',#8349,.T.);+#8349 = EDGE_LOOP('',(#8350,#8351,#8352,#8353,#8354,#8355,#8356,#8357,+ #8358));+#8350 = ORIENTED_EDGE('',*,*,#7865,.T.);+#8351 = ORIENTED_EDGE('',*,*,#7896,.T.);+#8352 = ORIENTED_EDGE('',*,*,#7927,.T.);+#8353 = ORIENTED_EDGE('',*,*,#7960,.T.);+#8354 = ORIENTED_EDGE('',*,*,#7993,.T.);+#8355 = ORIENTED_EDGE('',*,*,#8026,.T.);+#8356 = ORIENTED_EDGE('',*,*,#8059,.T.);+#8357 = ORIENTED_EDGE('',*,*,#8090,.T.);+#8358 = ORIENTED_EDGE('',*,*,#8112,.T.);+#8359 = FACE_BOUND('',#8360,.T.);+#8360 = EDGE_LOOP('',(#8361,#8362,#8363,#8364,#8365,#8366,#8367));+#8361 = ORIENTED_EDGE('',*,*,#8152,.T.);+#8362 = ORIENTED_EDGE('',*,*,#8183,.T.);+#8363 = ORIENTED_EDGE('',*,*,#8214,.T.);+#8364 = ORIENTED_EDGE('',*,*,#8245,.T.);+#8365 = ORIENTED_EDGE('',*,*,#8278,.T.);+#8366 = ORIENTED_EDGE('',*,*,#8311,.T.);+#8367 = ORIENTED_EDGE('',*,*,#8335,.T.);+#8368 = PLANE('',#8369);+#8369 = AXIS2_PLACEMENT_3D('',#8370,#8371,#8372);+#8370 = CARTESIAN_POINT('',(0.108377220031,0.268289952472,1.552977284328+ ));+#8371 = DIRECTION('',(0.,0.,1.));+#8372 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8373 = ADVANCED_FACE('',(#8374,#8385),#8394,.T.);+#8374 = FACE_BOUND('',#8375,.F.);+#8375 = EDGE_LOOP('',(#8376,#8377,#8378,#8379,#8380,#8381,#8382,#8383,+ #8384));+#8376 = ORIENTED_EDGE('',*,*,#7849,.T.);+#8377 = ORIENTED_EDGE('',*,*,#7880,.T.);+#8378 = ORIENTED_EDGE('',*,*,#7911,.T.);+#8379 = ORIENTED_EDGE('',*,*,#7944,.T.);+#8380 = ORIENTED_EDGE('',*,*,#7977,.T.);+#8381 = ORIENTED_EDGE('',*,*,#8010,.T.);+#8382 = ORIENTED_EDGE('',*,*,#8043,.T.);+#8383 = ORIENTED_EDGE('',*,*,#8074,.T.);+#8384 = ORIENTED_EDGE('',*,*,#8105,.T.);+#8385 = FACE_BOUND('',#8386,.F.);+#8386 = EDGE_LOOP('',(#8387,#8388,#8389,#8390,#8391,#8392,#8393));+#8387 = ORIENTED_EDGE('',*,*,#8136,.T.);+#8388 = ORIENTED_EDGE('',*,*,#8167,.T.);+#8389 = ORIENTED_EDGE('',*,*,#8198,.T.);+#8390 = ORIENTED_EDGE('',*,*,#8229,.T.);+#8391 = ORIENTED_EDGE('',*,*,#8262,.T.);+#8392 = ORIENTED_EDGE('',*,*,#8295,.T.);+#8393 = ORIENTED_EDGE('',*,*,#8328,.T.);+#8394 = PLANE('',#8395);+#8395 = AXIS2_PLACEMENT_3D('',#8396,#8397,#8398);+#8396 = CARTESIAN_POINT('',(0.108377220031,0.268289952472,1.558931852983+ ));+#8397 = DIRECTION('',(0.,0.,1.));+#8398 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8399 = MANIFOLD_SOLID_BREP('',#8400);+#8400 = CLOSED_SHELL('',(#8401,#8441,#8472,#8503,#8534,#8565,#8596,#8627+ ,#8658,#8689,#8720,#8751,#8782,#8804,#8825));+#8401 = ADVANCED_FACE('',(#8402),#8436,.T.);+#8402 = FACE_BOUND('',#8403,.T.);+#8403 = EDGE_LOOP('',(#8404,#8414,#8422,#8430));+#8404 = ORIENTED_EDGE('',*,*,#8405,.T.);+#8405 = EDGE_CURVE('',#8406,#8408,#8410,.T.);+#8406 = VERTEX_POINT('',#8407);+#8407 = CARTESIAN_POINT('',(0.108377220031,0.474286626898,1.552977284328+ ));+#8408 = VERTEX_POINT('',#8409);+#8409 = CARTESIAN_POINT('',(0.108377220031,0.474286626898,1.558931852983+ ));+#8410 = LINE('',#8411,#8412);+#8411 = CARTESIAN_POINT('',(0.108377220031,0.474286626898,1.552977284328+ ));+#8412 = VECTOR('',#8413,1.);+#8413 = DIRECTION('',(0.,0.,1.));+#8414 = ORIENTED_EDGE('',*,*,#8415,.T.);+#8415 = EDGE_CURVE('',#8408,#8416,#8418,.T.);+#8416 = VERTEX_POINT('',#8417);+#8417 = CARTESIAN_POINT('',(-0.108667970454,0.447537588017,+ 1.558931852983));+#8418 = LINE('',#8419,#8420);+#8419 = CARTESIAN_POINT('',(0.108377220031,0.474286626898,1.558931852983+ ));+#8420 = VECTOR('',#8421,1.);+#8421 = DIRECTION('',(-0.992491158779,-0.122316391973,0.));+#8422 = ORIENTED_EDGE('',*,*,#8423,.F.);+#8423 = EDGE_CURVE('',#8424,#8416,#8426,.T.);+#8424 = VERTEX_POINT('',#8425);+#8425 = CARTESIAN_POINT('',(-0.108667970454,0.447537588017,+ 1.552977284328));+#8426 = LINE('',#8427,#8428);+#8427 = CARTESIAN_POINT('',(-0.108667970454,0.447537588017,+ 1.552977284328));+#8428 = VECTOR('',#8429,1.);+#8429 = DIRECTION('',(0.,0.,1.));+#8430 = ORIENTED_EDGE('',*,*,#8431,.F.);+#8431 = EDGE_CURVE('',#8406,#8424,#8432,.T.);+#8432 = LINE('',#8433,#8434);+#8433 = CARTESIAN_POINT('',(0.108377220031,0.474286626898,1.552977284328+ ));+#8434 = VECTOR('',#8435,1.);+#8435 = DIRECTION('',(-0.992491158779,-0.122316391973,0.));+#8436 = PLANE('',#8437);+#8437 = AXIS2_PLACEMENT_3D('',#8438,#8439,#8440);+#8438 = CARTESIAN_POINT('',(0.108377220031,0.474286626898,1.552977284328+ ));+#8439 = DIRECTION('',(0.122316391973,-0.992491158779,0.));+#8440 = DIRECTION('',(-0.992491158779,-0.122316391973,0.));+#8441 = ADVANCED_FACE('',(#8442),#8467,.T.);+#8442 = FACE_BOUND('',#8443,.T.);+#8443 = EDGE_LOOP('',(#8444,#8445,#8453,#8461));+#8444 = ORIENTED_EDGE('',*,*,#8423,.T.);+#8445 = ORIENTED_EDGE('',*,*,#8446,.T.);+#8446 = EDGE_CURVE('',#8416,#8447,#8449,.T.);+#8447 = VERTEX_POINT('',#8448);+#8448 = CARTESIAN_POINT('',(-0.108667970454,0.485044392535,+ 1.558931852983));+#8449 = LINE('',#8450,#8451);+#8450 = CARTESIAN_POINT('',(-0.108667970454,0.447537588017,+ 1.558931852983));+#8451 = VECTOR('',#8452,1.);+#8452 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8453 = ORIENTED_EDGE('',*,*,#8454,.F.);+#8454 = EDGE_CURVE('',#8455,#8447,#8457,.T.);+#8455 = VERTEX_POINT('',#8456);+#8456 = CARTESIAN_POINT('',(-0.108667970454,0.485044392535,+ 1.552977284328));+#8457 = LINE('',#8458,#8459);+#8458 = CARTESIAN_POINT('',(-0.108667970454,0.485044392535,+ 1.552977284328));+#8459 = VECTOR('',#8460,1.);+#8460 = DIRECTION('',(0.,0.,1.));+#8461 = ORIENTED_EDGE('',*,*,#8462,.F.);+#8462 = EDGE_CURVE('',#8424,#8455,#8463,.T.);+#8463 = LINE('',#8464,#8465);+#8464 = CARTESIAN_POINT('',(-0.108667970454,0.447537588017,+ 1.552977284328));+#8465 = VECTOR('',#8466,1.);+#8466 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8467 = PLANE('',#8468);+#8468 = AXIS2_PLACEMENT_3D('',#8469,#8470,#8471);+#8469 = CARTESIAN_POINT('',(-0.108667970454,0.447537588017,+ 1.552977284328));+#8470 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#8471 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8472 = ADVANCED_FACE('',(#8473),#8498,.T.);+#8473 = FACE_BOUND('',#8474,.T.);+#8474 = EDGE_LOOP('',(#8475,#8476,#8484,#8492));+#8475 = ORIENTED_EDGE('',*,*,#8454,.T.);+#8476 = ORIENTED_EDGE('',*,*,#8477,.T.);+#8477 = EDGE_CURVE('',#8447,#8478,#8480,.T.);+#8478 = VERTEX_POINT('',#8479);+#8479 = CARTESIAN_POINT('',(5.066326114144E-02,0.500599540145,+ 1.558931852983));+#8480 = LINE('',#8481,#8482);+#8481 = CARTESIAN_POINT('',(-0.108667970454,0.485044392535,+ 1.558931852983));+#8482 = VECTOR('',#8483,1.);+#8483 = DIRECTION('',(0.99526821036,9.716578331071E-02,0.));+#8484 = ORIENTED_EDGE('',*,*,#8485,.F.);+#8485 = EDGE_CURVE('',#8486,#8478,#8488,.T.);+#8486 = VERTEX_POINT('',#8487);+#8487 = CARTESIAN_POINT('',(5.066326114144E-02,0.500599540145,+ 1.552977284328));+#8488 = LINE('',#8489,#8490);+#8489 = CARTESIAN_POINT('',(5.066326114144E-02,0.500599540145,+ 1.552977284328));+#8490 = VECTOR('',#8491,1.);+#8491 = DIRECTION('',(0.,0.,1.));+#8492 = ORIENTED_EDGE('',*,*,#8493,.F.);+#8493 = EDGE_CURVE('',#8455,#8486,#8494,.T.);+#8494 = LINE('',#8495,#8496);+#8495 = CARTESIAN_POINT('',(-0.108667970454,0.485044392535,+ 1.552977284328));+#8496 = VECTOR('',#8497,1.);+#8497 = DIRECTION('',(0.99526821036,9.716578331071E-02,0.));+#8498 = PLANE('',#8499);+#8499 = AXIS2_PLACEMENT_3D('',#8500,#8501,#8502);+#8500 = CARTESIAN_POINT('',(-0.108667970454,0.485044392535,+ 1.552977284328));+#8501 = DIRECTION('',(-9.716578331071E-02,0.99526821036,0.));+#8502 = DIRECTION('',(0.99526821036,9.716578331071E-02,0.));+#8503 = ADVANCED_FACE('',(#8504),#8529,.T.);+#8504 = FACE_BOUND('',#8505,.T.);+#8505 = EDGE_LOOP('',(#8506,#8507,#8515,#8523));+#8506 = ORIENTED_EDGE('',*,*,#8485,.T.);+#8507 = ORIENTED_EDGE('',*,*,#8508,.T.);+#8508 = EDGE_CURVE('',#8478,#8509,#8511,.T.);+#8509 = VERTEX_POINT('',#8510);+#8510 = CARTESIAN_POINT('',(-5.240776367716E-02,0.519352942404,+ 1.558931852983));+#8511 = LINE('',#8512,#8513);+#8512 = CARTESIAN_POINT('',(5.066326114144E-02,0.500599540145,+ 1.558931852983));+#8513 = VECTOR('',#8514,1.);+#8514 = DIRECTION('',(-0.983847700035,0.1790075505,0.));+#8515 = ORIENTED_EDGE('',*,*,#8516,.F.);+#8516 = EDGE_CURVE('',#8517,#8509,#8519,.T.);+#8517 = VERTEX_POINT('',#8518);+#8518 = CARTESIAN_POINT('',(-5.240776367716E-02,0.519352942404,+ 1.552977284328));+#8519 = LINE('',#8520,#8521);+#8520 = CARTESIAN_POINT('',(-5.240776367716E-02,0.519352942404,+ 1.552977284328));+#8521 = VECTOR('',#8522,1.);+#8522 = DIRECTION('',(0.,0.,1.));+#8523 = ORIENTED_EDGE('',*,*,#8524,.F.);+#8524 = EDGE_CURVE('',#8486,#8517,#8525,.T.);+#8525 = LINE('',#8526,#8527);+#8526 = CARTESIAN_POINT('',(5.066326114144E-02,0.500599540145,+ 1.552977284328));+#8527 = VECTOR('',#8528,1.);+#8528 = DIRECTION('',(-0.983847700035,0.1790075505,0.));+#8529 = PLANE('',#8530);+#8530 = AXIS2_PLACEMENT_3D('',#8531,#8532,#8533);+#8531 = CARTESIAN_POINT('',(5.066326114144E-02,0.500599540145,+ 1.552977284328));+#8532 = DIRECTION('',(-0.1790075505,-0.983847700035,0.));+#8533 = DIRECTION('',(-0.983847700035,0.1790075505,0.));+#8534 = ADVANCED_FACE('',(#8535),#8560,.T.);+#8535 = FACE_BOUND('',#8536,.T.);+#8536 = EDGE_LOOP('',(#8537,#8538,#8546,#8554));+#8537 = ORIENTED_EDGE('',*,*,#8516,.T.);+#8538 = ORIENTED_EDGE('',*,*,#8539,.T.);+#8539 = EDGE_CURVE('',#8509,#8540,#8542,.T.);+#8540 = VERTEX_POINT('',#8541);+#8541 = CARTESIAN_POINT('',(-5.240776367716E-02,0.554969869175,+ 1.558931852983));+#8542 = LINE('',#8543,#8544);+#8543 = CARTESIAN_POINT('',(-5.240776367716E-02,0.519352942404,+ 1.558931852983));+#8544 = VECTOR('',#8545,1.);+#8545 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8546 = ORIENTED_EDGE('',*,*,#8547,.F.);+#8547 = EDGE_CURVE('',#8548,#8540,#8550,.T.);+#8548 = VERTEX_POINT('',#8549);+#8549 = CARTESIAN_POINT('',(-5.240776367716E-02,0.554969869175,+ 1.552977284328));+#8550 = LINE('',#8551,#8552);+#8551 = CARTESIAN_POINT('',(-5.240776367716E-02,0.554969869175,+ 1.552977284328));+#8552 = VECTOR('',#8553,1.);+#8553 = DIRECTION('',(0.,0.,1.));+#8554 = ORIENTED_EDGE('',*,*,#8555,.F.);+#8555 = EDGE_CURVE('',#8517,#8548,#8556,.T.);+#8556 = LINE('',#8557,#8558);+#8557 = CARTESIAN_POINT('',(-5.240776367716E-02,0.519352942404,+ 1.552977284328));+#8558 = VECTOR('',#8559,1.);+#8559 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8560 = PLANE('',#8561);+#8561 = AXIS2_PLACEMENT_3D('',#8562,#8563,#8564);+#8562 = CARTESIAN_POINT('',(-5.240776367716E-02,0.519352942404,+ 1.552977284328));+#8563 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#8564 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8565 = ADVANCED_FACE('',(#8566),#8591,.T.);+#8566 = FACE_BOUND('',#8567,.T.);+#8567 = EDGE_LOOP('',(#8568,#8569,#8577,#8585));+#8568 = ORIENTED_EDGE('',*,*,#8547,.T.);+#8569 = ORIENTED_EDGE('',*,*,#8570,.T.);+#8570 = EDGE_CURVE('',#8540,#8571,#8573,.T.);+#8571 = VERTEX_POINT('',#8572);+#8572 = CARTESIAN_POINT('',(5.066326114144E-02,0.576776150871,+ 1.558931852983));+#8573 = LINE('',#8574,#8575);+#8574 = CARTESIAN_POINT('',(-5.240776367716E-02,0.554969869175,+ 1.558931852983));+#8575 = VECTOR('',#8576,1.);+#8576 = DIRECTION('',(0.978344329753,0.20698399078,0.));+#8577 = ORIENTED_EDGE('',*,*,#8578,.F.);+#8578 = EDGE_CURVE('',#8579,#8571,#8581,.T.);+#8579 = VERTEX_POINT('',#8580);+#8580 = CARTESIAN_POINT('',(5.066326114144E-02,0.576776150871,+ 1.552977284328));+#8581 = LINE('',#8582,#8583);+#8582 = CARTESIAN_POINT('',(5.066326114144E-02,0.576776150871,+ 1.552977284328));+#8583 = VECTOR('',#8584,1.);+#8584 = DIRECTION('',(0.,0.,1.));+#8585 = ORIENTED_EDGE('',*,*,#8586,.F.);+#8586 = EDGE_CURVE('',#8548,#8579,#8587,.T.);+#8587 = LINE('',#8588,#8589);+#8588 = CARTESIAN_POINT('',(-5.240776367716E-02,0.554969869175,+ 1.552977284328));+#8589 = VECTOR('',#8590,1.);+#8590 = DIRECTION('',(0.978344329753,0.20698399078,0.));+#8591 = PLANE('',#8592);+#8592 = AXIS2_PLACEMENT_3D('',#8593,#8594,#8595);+#8593 = CARTESIAN_POINT('',(-5.240776367716E-02,0.554969869175,+ 1.552977284328));+#8594 = DIRECTION('',(-0.20698399078,0.978344329753,0.));+#8595 = DIRECTION('',(0.978344329753,0.20698399078,0.));+#8596 = ADVANCED_FACE('',(#8597),#8622,.T.);+#8597 = FACE_BOUND('',#8598,.T.);+#8598 = EDGE_LOOP('',(#8599,#8600,#8608,#8616));+#8599 = ORIENTED_EDGE('',*,*,#8578,.T.);+#8600 = ORIENTED_EDGE('',*,*,#8601,.T.);+#8601 = EDGE_CURVE('',#8571,#8602,#8604,.T.);+#8602 = VERTEX_POINT('',#8603);+#8603 = CARTESIAN_POINT('',(-0.108667970454,0.588987668621,+ 1.558931852983));+#8604 = LINE('',#8605,#8606);+#8605 = CARTESIAN_POINT('',(5.066326114144E-02,0.576776150871,+ 1.558931852983));+#8606 = VECTOR('',#8607,1.);+#8607 = DIRECTION('',(-0.997075852334,7.641822225914E-02,0.));+#8608 = ORIENTED_EDGE('',*,*,#8609,.F.);+#8609 = EDGE_CURVE('',#8610,#8602,#8612,.T.);+#8610 = VERTEX_POINT('',#8611);+#8611 = CARTESIAN_POINT('',(-0.108667970454,0.588987668621,+ 1.552977284328));+#8612 = LINE('',#8613,#8614);+#8613 = CARTESIAN_POINT('',(-0.108667970454,0.588987668621,+ 1.552977284328));+#8614 = VECTOR('',#8615,1.);+#8615 = DIRECTION('',(0.,0.,1.));+#8616 = ORIENTED_EDGE('',*,*,#8617,.F.);+#8617 = EDGE_CURVE('',#8579,#8610,#8618,.T.);+#8618 = LINE('',#8619,#8620);+#8619 = CARTESIAN_POINT('',(5.066326114144E-02,0.576776150871,+ 1.552977284328));+#8620 = VECTOR('',#8621,1.);+#8621 = DIRECTION('',(-0.997075852334,7.641822225914E-02,0.));+#8622 = PLANE('',#8623);+#8623 = AXIS2_PLACEMENT_3D('',#8624,#8625,#8626);+#8624 = CARTESIAN_POINT('',(5.066326114144E-02,0.576776150871,+ 1.552977284328));+#8625 = DIRECTION('',(-7.641822225914E-02,-0.997075852334,0.));+#8626 = DIRECTION('',(-0.997075852334,7.641822225914E-02,0.));+#8627 = ADVANCED_FACE('',(#8628),#8653,.T.);+#8628 = FACE_BOUND('',#8629,.T.);+#8629 = EDGE_LOOP('',(#8630,#8631,#8639,#8647));+#8630 = ORIENTED_EDGE('',*,*,#8609,.T.);+#8631 = ORIENTED_EDGE('',*,*,#8632,.T.);+#8632 = EDGE_CURVE('',#8602,#8633,#8635,.T.);+#8633 = VERTEX_POINT('',#8634);+#8634 = CARTESIAN_POINT('',(-0.108667970454,0.626785223562,+ 1.558931852983));+#8635 = LINE('',#8636,#8637);+#8636 = CARTESIAN_POINT('',(-0.108667970454,0.588987668621,+ 1.558931852983));+#8637 = VECTOR('',#8638,1.);+#8638 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8639 = ORIENTED_EDGE('',*,*,#8640,.F.);+#8640 = EDGE_CURVE('',#8641,#8633,#8643,.T.);+#8641 = VERTEX_POINT('',#8642);+#8642 = CARTESIAN_POINT('',(-0.108667970454,0.626785223562,+ 1.552977284328));+#8643 = LINE('',#8644,#8645);+#8644 = CARTESIAN_POINT('',(-0.108667970454,0.626785223562,+ 1.552977284328));+#8645 = VECTOR('',#8646,1.);+#8646 = DIRECTION('',(0.,0.,1.));+#8647 = ORIENTED_EDGE('',*,*,#8648,.F.);+#8648 = EDGE_CURVE('',#8610,#8641,#8649,.T.);+#8649 = LINE('',#8650,#8651);+#8650 = CARTESIAN_POINT('',(-0.108667970454,0.588987668621,+ 1.552977284328));+#8651 = VECTOR('',#8652,1.);+#8652 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8653 = PLANE('',#8654);+#8654 = AXIS2_PLACEMENT_3D('',#8655,#8656,#8657);+#8655 = CARTESIAN_POINT('',(-0.108667970454,0.588987668621,+ 1.552977284328));+#8656 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#8657 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8658 = ADVANCED_FACE('',(#8659),#8684,.T.);+#8659 = FACE_BOUND('',#8660,.T.);+#8660 = EDGE_LOOP('',(#8661,#8662,#8670,#8678));+#8661 = ORIENTED_EDGE('',*,*,#8640,.T.);+#8662 = ORIENTED_EDGE('',*,*,#8663,.T.);+#8663 = EDGE_CURVE('',#8633,#8664,#8666,.T.);+#8664 = VERTEX_POINT('',#8665);+#8665 = CARTESIAN_POINT('',(0.108377220031,0.601780687217,1.558931852983+ ));+#8666 = LINE('',#8667,#8668);+#8667 = CARTESIAN_POINT('',(-0.108667970454,0.626785223562,+ 1.558931852983));+#8668 = VECTOR('',#8669,1.);+#8669 = DIRECTION('',(0.993429319,-0.114447316054,0.));+#8670 = ORIENTED_EDGE('',*,*,#8671,.F.);+#8671 = EDGE_CURVE('',#8672,#8664,#8674,.T.);+#8672 = VERTEX_POINT('',#8673);+#8673 = CARTESIAN_POINT('',(0.108377220031,0.601780687217,1.552977284328+ ));+#8674 = LINE('',#8675,#8676);+#8675 = CARTESIAN_POINT('',(0.108377220031,0.601780687217,1.552977284328+ ));+#8676 = VECTOR('',#8677,1.);+#8677 = DIRECTION('',(0.,0.,1.));+#8678 = ORIENTED_EDGE('',*,*,#8679,.F.);+#8679 = EDGE_CURVE('',#8641,#8672,#8680,.T.);+#8680 = LINE('',#8681,#8682);+#8681 = CARTESIAN_POINT('',(-0.108667970454,0.626785223562,+ 1.552977284328));+#8682 = VECTOR('',#8683,1.);+#8683 = DIRECTION('',(0.993429319,-0.114447316054,0.));+#8684 = PLANE('',#8685);+#8685 = AXIS2_PLACEMENT_3D('',#8686,#8687,#8688);+#8686 = CARTESIAN_POINT('',(-0.108667970454,0.626785223562,+ 1.552977284328));+#8687 = DIRECTION('',(0.114447316054,0.993429319,-0.));+#8688 = DIRECTION('',(0.993429319,-0.114447316054,0.));+#8689 = ADVANCED_FACE('',(#8690),#8715,.T.);+#8690 = FACE_BOUND('',#8691,.T.);+#8691 = EDGE_LOOP('',(#8692,#8693,#8701,#8709));+#8692 = ORIENTED_EDGE('',*,*,#8671,.T.);+#8693 = ORIENTED_EDGE('',*,*,#8694,.T.);+#8694 = EDGE_CURVE('',#8664,#8695,#8697,.T.);+#8695 = VERTEX_POINT('',#8696);+#8696 = CARTESIAN_POINT('',(0.108377220031,0.561802504106,1.558931852983+ ));+#8697 = LINE('',#8698,#8699);+#8698 = CARTESIAN_POINT('',(0.108377220031,0.601780687217,1.558931852983+ ));+#8699 = VECTOR('',#8700,1.);+#8700 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8701 = ORIENTED_EDGE('',*,*,#8702,.F.);+#8702 = EDGE_CURVE('',#8703,#8695,#8705,.T.);+#8703 = VERTEX_POINT('',#8704);+#8704 = CARTESIAN_POINT('',(0.108377220031,0.561802504106,1.552977284328+ ));+#8705 = LINE('',#8706,#8707);+#8706 = CARTESIAN_POINT('',(0.108377220031,0.561802504106,1.552977284328+ ));+#8707 = VECTOR('',#8708,1.);+#8708 = DIRECTION('',(0.,0.,1.));+#8709 = ORIENTED_EDGE('',*,*,#8710,.F.);+#8710 = EDGE_CURVE('',#8672,#8703,#8711,.T.);+#8711 = LINE('',#8712,#8713);+#8712 = CARTESIAN_POINT('',(0.108377220031,0.601780687217,1.552977284328+ ));+#8713 = VECTOR('',#8714,1.);+#8714 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8715 = PLANE('',#8716);+#8716 = AXIS2_PLACEMENT_3D('',#8717,#8718,#8719);+#8717 = CARTESIAN_POINT('',(0.108377220031,0.601780687217,1.552977284328+ ));+#8718 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8719 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8720 = ADVANCED_FACE('',(#8721),#8746,.T.);+#8721 = FACE_BOUND('',#8722,.T.);+#8722 = EDGE_LOOP('',(#8723,#8724,#8732,#8740));+#8723 = ORIENTED_EDGE('',*,*,#8702,.T.);+#8724 = ORIENTED_EDGE('',*,*,#8725,.T.);+#8725 = EDGE_CURVE('',#8695,#8726,#8728,.T.);+#8726 = VERTEX_POINT('',#8727);+#8727 = CARTESIAN_POINT('',(-5.596945635425E-03,0.537088718184,+ 1.558931852983));+#8728 = LINE('',#8729,#8730);+#8729 = CARTESIAN_POINT('',(0.108377220031,0.561802504106,1.558931852983+ ));+#8730 = VECTOR('',#8731,1.);+#8731 = DIRECTION('',(-0.977288730651,-0.211912097207,0.));+#8732 = ORIENTED_EDGE('',*,*,#8733,.F.);+#8733 = EDGE_CURVE('',#8734,#8726,#8736,.T.);+#8734 = VERTEX_POINT('',#8735);+#8735 = CARTESIAN_POINT('',(-5.596945635425E-03,0.537088718184,+ 1.552977284328));+#8736 = LINE('',#8737,#8738);+#8737 = CARTESIAN_POINT('',(-5.596945635425E-03,0.537088718184,+ 1.552977284328));+#8738 = VECTOR('',#8739,1.);+#8739 = DIRECTION('',(0.,0.,1.));+#8740 = ORIENTED_EDGE('',*,*,#8741,.F.);+#8741 = EDGE_CURVE('',#8703,#8734,#8742,.T.);+#8742 = LINE('',#8743,#8744);+#8743 = CARTESIAN_POINT('',(0.108377220031,0.561802504106,1.552977284328+ ));+#8744 = VECTOR('',#8745,1.);+#8745 = DIRECTION('',(-0.977288730651,-0.211912097207,0.));+#8746 = PLANE('',#8747);+#8747 = AXIS2_PLACEMENT_3D('',#8748,#8749,#8750);+#8748 = CARTESIAN_POINT('',(0.108377220031,0.561802504106,1.552977284328+ ));+#8749 = DIRECTION('',(0.211912097207,-0.977288730651,0.));+#8750 = DIRECTION('',(-0.977288730651,-0.211912097207,0.));+#8751 = ADVANCED_FACE('',(#8752),#8777,.T.);+#8752 = FACE_BOUND('',#8753,.T.);+#8753 = EDGE_LOOP('',(#8754,#8755,#8763,#8771));+#8754 = ORIENTED_EDGE('',*,*,#8733,.T.);+#8755 = ORIENTED_EDGE('',*,*,#8756,.T.);+#8756 = EDGE_CURVE('',#8726,#8757,#8759,.T.);+#8757 = VERTEX_POINT('',#8758);+#8758 = CARTESIAN_POINT('',(0.108377220031,0.513974059586,1.558931852983+ ));+#8759 = LINE('',#8760,#8761);+#8760 = CARTESIAN_POINT('',(-5.596945635425E-03,0.537088718184,+ 1.558931852983));+#8761 = VECTOR('',#8762,1.);+#8762 = DIRECTION('',(0.980048237936,-0.198759782949,0.));+#8763 = ORIENTED_EDGE('',*,*,#8764,.F.);+#8764 = EDGE_CURVE('',#8765,#8757,#8767,.T.);+#8765 = VERTEX_POINT('',#8766);+#8766 = CARTESIAN_POINT('',(0.108377220031,0.513974059586,1.552977284328+ ));+#8767 = LINE('',#8768,#8769);+#8768 = CARTESIAN_POINT('',(0.108377220031,0.513974059586,1.552977284328+ ));+#8769 = VECTOR('',#8770,1.);+#8770 = DIRECTION('',(0.,0.,1.));+#8771 = ORIENTED_EDGE('',*,*,#8772,.F.);+#8772 = EDGE_CURVE('',#8734,#8765,#8773,.T.);+#8773 = LINE('',#8774,#8775);+#8774 = CARTESIAN_POINT('',(-5.596945635425E-03,0.537088718184,+ 1.552977284328));+#8775 = VECTOR('',#8776,1.);+#8776 = DIRECTION('',(0.980048237936,-0.198759782949,0.));+#8777 = PLANE('',#8778);+#8778 = AXIS2_PLACEMENT_3D('',#8779,#8780,#8781);+#8779 = CARTESIAN_POINT('',(-5.596945635425E-03,0.537088718184,+ 1.552977284328));+#8780 = DIRECTION('',(0.198759782949,0.980048237936,-0.));+#8781 = DIRECTION('',(0.980048237936,-0.198759782949,0.));+#8782 = ADVANCED_FACE('',(#8783),#8799,.T.);+#8783 = FACE_BOUND('',#8784,.T.);+#8784 = EDGE_LOOP('',(#8785,#8786,#8792,#8793));+#8785 = ORIENTED_EDGE('',*,*,#8764,.T.);+#8786 = ORIENTED_EDGE('',*,*,#8787,.T.);+#8787 = EDGE_CURVE('',#8757,#8408,#8788,.T.);+#8788 = LINE('',#8789,#8790);+#8789 = CARTESIAN_POINT('',(0.108377220031,0.513974059586,1.558931852983+ ));+#8790 = VECTOR('',#8791,1.);+#8791 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8792 = ORIENTED_EDGE('',*,*,#8405,.F.);+#8793 = ORIENTED_EDGE('',*,*,#8794,.F.);+#8794 = EDGE_CURVE('',#8765,#8406,#8795,.T.);+#8795 = LINE('',#8796,#8797);+#8796 = CARTESIAN_POINT('',(0.108377220031,0.513974059586,1.552977284328+ ));+#8797 = VECTOR('',#8798,1.);+#8798 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8799 = PLANE('',#8800);+#8800 = AXIS2_PLACEMENT_3D('',#8801,#8802,#8803);+#8801 = CARTESIAN_POINT('',(0.108377220031,0.513974059586,1.552977284328+ ));+#8802 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#8803 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#8804 = ADVANCED_FACE('',(#8805),#8820,.F.);+#8805 = FACE_BOUND('',#8806,.T.);+#8806 = EDGE_LOOP('',(#8807,#8808,#8809,#8810,#8811,#8812,#8813,#8814,+ #8815,#8816,#8817,#8818,#8819));+#8807 = ORIENTED_EDGE('',*,*,#8431,.T.);+#8808 = ORIENTED_EDGE('',*,*,#8462,.T.);+#8809 = ORIENTED_EDGE('',*,*,#8493,.T.);+#8810 = ORIENTED_EDGE('',*,*,#8524,.T.);+#8811 = ORIENTED_EDGE('',*,*,#8555,.T.);+#8812 = ORIENTED_EDGE('',*,*,#8586,.T.);+#8813 = ORIENTED_EDGE('',*,*,#8617,.T.);+#8814 = ORIENTED_EDGE('',*,*,#8648,.T.);+#8815 = ORIENTED_EDGE('',*,*,#8679,.T.);+#8816 = ORIENTED_EDGE('',*,*,#8710,.T.);+#8817 = ORIENTED_EDGE('',*,*,#8741,.T.);+#8818 = ORIENTED_EDGE('',*,*,#8772,.T.);+#8819 = ORIENTED_EDGE('',*,*,#8794,.T.);+#8820 = PLANE('',#8821);+#8821 = AXIS2_PLACEMENT_3D('',#8822,#8823,#8824);+#8822 = CARTESIAN_POINT('',(0.108377220031,0.447537588017,1.552977284328+ ));+#8823 = DIRECTION('',(0.,0.,1.));+#8824 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8825 = ADVANCED_FACE('',(#8826),#8841,.T.);+#8826 = FACE_BOUND('',#8827,.F.);+#8827 = EDGE_LOOP('',(#8828,#8829,#8830,#8831,#8832,#8833,#8834,#8835,+ #8836,#8837,#8838,#8839,#8840));+#8828 = ORIENTED_EDGE('',*,*,#8415,.T.);+#8829 = ORIENTED_EDGE('',*,*,#8446,.T.);+#8830 = ORIENTED_EDGE('',*,*,#8477,.T.);+#8831 = ORIENTED_EDGE('',*,*,#8508,.T.);+#8832 = ORIENTED_EDGE('',*,*,#8539,.T.);+#8833 = ORIENTED_EDGE('',*,*,#8570,.T.);+#8834 = ORIENTED_EDGE('',*,*,#8601,.T.);+#8835 = ORIENTED_EDGE('',*,*,#8632,.T.);+#8836 = ORIENTED_EDGE('',*,*,#8663,.T.);+#8837 = ORIENTED_EDGE('',*,*,#8694,.T.);+#8838 = ORIENTED_EDGE('',*,*,#8725,.T.);+#8839 = ORIENTED_EDGE('',*,*,#8756,.T.);+#8840 = ORIENTED_EDGE('',*,*,#8787,.T.);+#8841 = PLANE('',#8842);+#8842 = AXIS2_PLACEMENT_3D('',#8843,#8844,#8845);+#8843 = CARTESIAN_POINT('',(0.108377220031,0.447537588017,1.558931852983+ ));+#8844 = DIRECTION('',(0.,0.,1.));+#8845 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8846 = MANIFOLD_SOLID_BREP('',#8847);+#8847 = CLOSED_SHELL('',(#8848,#8888,#8919,#8950,#8981,#9012,#9043,#9074+ ,#9105,#9127,#9144));+#8848 = ADVANCED_FACE('',(#8849),#8883,.T.);+#8849 = FACE_BOUND('',#8850,.T.);+#8850 = EDGE_LOOP('',(#8851,#8861,#8869,#8877));+#8851 = ORIENTED_EDGE('',*,*,#8852,.T.);+#8852 = EDGE_CURVE('',#8853,#8855,#8857,.T.);+#8853 = VERTEX_POINT('',#8854);+#8854 = CARTESIAN_POINT('',(2.289659578128E-02,0.694966197666,+ 1.552977284328));+#8855 = VERTEX_POINT('',#8856);+#8856 = CARTESIAN_POINT('',(2.289659578128E-02,0.694966197666,+ 1.558931852983));+#8857 = LINE('',#8858,#8859);+#8858 = CARTESIAN_POINT('',(2.289659578128E-02,0.694966197666,+ 1.552977284328));+#8859 = VECTOR('',#8860,1.);+#8860 = DIRECTION('',(0.,0.,1.));+#8861 = ORIENTED_EDGE('',*,*,#8862,.T.);+#8862 = EDGE_CURVE('',#8855,#8863,#8865,.T.);+#8863 = VERTEX_POINT('',#8864);+#8864 = CARTESIAN_POINT('',(-0.108667970454,0.627948225252,+ 1.558931852983));+#8865 = LINE('',#8866,#8867);+#8866 = CARTESIAN_POINT('',(2.289659578128E-02,0.694966197666,+ 1.558931852983));+#8867 = VECTOR('',#8868,1.);+#8868 = DIRECTION('',(-0.89105452404,-0.453896282412,0.));+#8869 = ORIENTED_EDGE('',*,*,#8870,.F.);+#8870 = EDGE_CURVE('',#8871,#8863,#8873,.T.);+#8871 = VERTEX_POINT('',#8872);+#8872 = CARTESIAN_POINT('',(-0.108667970454,0.627948225252,+ 1.552977284328));+#8873 = LINE('',#8874,#8875);+#8874 = CARTESIAN_POINT('',(-0.108667970454,0.627948225252,+ 1.552977284328));+#8875 = VECTOR('',#8876,1.);+#8876 = DIRECTION('',(0.,0.,1.));+#8877 = ORIENTED_EDGE('',*,*,#8878,.F.);+#8878 = EDGE_CURVE('',#8853,#8871,#8879,.T.);+#8879 = LINE('',#8880,#8881);+#8880 = CARTESIAN_POINT('',(2.289659578128E-02,0.694966197666,+ 1.552977284328));+#8881 = VECTOR('',#8882,1.);+#8882 = DIRECTION('',(-0.89105452404,-0.453896282412,0.));+#8883 = PLANE('',#8884);+#8884 = AXIS2_PLACEMENT_3D('',#8885,#8886,#8887);+#8885 = CARTESIAN_POINT('',(2.289659578128E-02,0.694966197666,+ 1.552977284328));+#8886 = DIRECTION('',(0.453896282412,-0.89105452404,0.));+#8887 = DIRECTION('',(-0.89105452404,-0.453896282412,0.));+#8888 = ADVANCED_FACE('',(#8889),#8914,.T.);+#8889 = FACE_BOUND('',#8890,.T.);+#8890 = EDGE_LOOP('',(#8891,#8892,#8900,#8908));+#8891 = ORIENTED_EDGE('',*,*,#8870,.T.);+#8892 = ORIENTED_EDGE('',*,*,#8893,.T.);+#8893 = EDGE_CURVE('',#8863,#8894,#8896,.T.);+#8894 = VERTEX_POINT('',#8895);+#8895 = CARTESIAN_POINT('',(-0.108667970454,0.674177542449,+ 1.558931852983));+#8896 = LINE('',#8897,#8898);+#8897 = CARTESIAN_POINT('',(-0.108667970454,0.627948225252,+ 1.558931852983));+#8898 = VECTOR('',#8899,1.);+#8899 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8900 = ORIENTED_EDGE('',*,*,#8901,.F.);+#8901 = EDGE_CURVE('',#8902,#8894,#8904,.T.);+#8902 = VERTEX_POINT('',#8903);+#8903 = CARTESIAN_POINT('',(-0.108667970454,0.674177542449,+ 1.552977284328));+#8904 = LINE('',#8905,#8906);+#8905 = CARTESIAN_POINT('',(-0.108667970454,0.674177542449,+ 1.552977284328));+#8906 = VECTOR('',#8907,1.);+#8907 = DIRECTION('',(0.,0.,1.));+#8908 = ORIENTED_EDGE('',*,*,#8909,.F.);+#8909 = EDGE_CURVE('',#8871,#8902,#8910,.T.);+#8910 = LINE('',#8911,#8912);+#8911 = CARTESIAN_POINT('',(-0.108667970454,0.627948225252,+ 1.552977284328));+#8912 = VECTOR('',#8913,1.);+#8913 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8914 = PLANE('',#8915);+#8915 = AXIS2_PLACEMENT_3D('',#8916,#8917,#8918);+#8916 = CARTESIAN_POINT('',(-0.108667970454,0.627948225252,+ 1.552977284328));+#8917 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#8918 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8919 = ADVANCED_FACE('',(#8920),#8945,.T.);+#8920 = FACE_BOUND('',#8921,.T.);+#8921 = EDGE_LOOP('',(#8922,#8923,#8931,#8939));+#8922 = ORIENTED_EDGE('',*,*,#8901,.T.);+#8923 = ORIENTED_EDGE('',*,*,#8924,.T.);+#8924 = EDGE_CURVE('',#8894,#8925,#8927,.T.);+#8925 = VERTEX_POINT('',#8926);+#8926 = CARTESIAN_POINT('',(-2.144284366819E-02,0.716336353729,+ 1.558931852983));+#8927 = LINE('',#8928,#8929);+#8928 = CARTESIAN_POINT('',(-0.108667970454,0.674177542449,+ 1.558931852983));+#8929 = VECTOR('',#8930,1.);+#8930 = DIRECTION('',(0.900348952842,0.43516866054,0.));+#8931 = ORIENTED_EDGE('',*,*,#8932,.F.);+#8932 = EDGE_CURVE('',#8933,#8925,#8935,.T.);+#8933 = VERTEX_POINT('',#8934);+#8934 = CARTESIAN_POINT('',(-2.144284366819E-02,0.716336353729,+ 1.552977284328));+#8935 = LINE('',#8936,#8937);+#8936 = CARTESIAN_POINT('',(-2.144284366819E-02,0.716336353729,+ 1.552977284328));+#8937 = VECTOR('',#8938,1.);+#8938 = DIRECTION('',(0.,0.,1.));+#8939 = ORIENTED_EDGE('',*,*,#8940,.F.);+#8940 = EDGE_CURVE('',#8902,#8933,#8941,.T.);+#8941 = LINE('',#8942,#8943);+#8942 = CARTESIAN_POINT('',(-0.108667970454,0.674177542449,+ 1.552977284328));+#8943 = VECTOR('',#8944,1.);+#8944 = DIRECTION('',(0.900348952842,0.43516866054,0.));+#8945 = PLANE('',#8946);+#8946 = AXIS2_PLACEMENT_3D('',#8947,#8948,#8949);+#8947 = CARTESIAN_POINT('',(-0.108667970454,0.674177542449,+ 1.552977284328));+#8948 = DIRECTION('',(-0.43516866054,0.900348952842,0.));+#8949 = DIRECTION('',(0.900348952842,0.43516866054,0.));+#8950 = ADVANCED_FACE('',(#8951),#8976,.T.);+#8951 = FACE_BOUND('',#8952,.T.);+#8952 = EDGE_LOOP('',(#8953,#8954,#8962,#8970));+#8953 = ORIENTED_EDGE('',*,*,#8932,.T.);+#8954 = ORIENTED_EDGE('',*,*,#8955,.T.);+#8955 = EDGE_CURVE('',#8925,#8956,#8958,.T.);+#8956 = VERTEX_POINT('',#8957);+#8957 = CARTESIAN_POINT('',(-0.108667970454,0.75864054022,1.558931852983+ ));+#8958 = LINE('',#8959,#8960);+#8959 = CARTESIAN_POINT('',(-2.144284366819E-02,0.716336353729,+ 1.558931852983));+#8960 = VECTOR('',#8961,1.);+#8961 = DIRECTION('',(-0.899760583068,0.436383882788,0.));+#8962 = ORIENTED_EDGE('',*,*,#8963,.F.);+#8963 = EDGE_CURVE('',#8964,#8956,#8966,.T.);+#8964 = VERTEX_POINT('',#8965);+#8965 = CARTESIAN_POINT('',(-0.108667970454,0.75864054022,1.552977284328+ ));+#8966 = LINE('',#8967,#8968);+#8967 = CARTESIAN_POINT('',(-0.108667970454,0.75864054022,1.552977284328+ ));+#8968 = VECTOR('',#8969,1.);+#8969 = DIRECTION('',(0.,0.,1.));+#8970 = ORIENTED_EDGE('',*,*,#8971,.F.);+#8971 = EDGE_CURVE('',#8933,#8964,#8972,.T.);+#8972 = LINE('',#8973,#8974);+#8973 = CARTESIAN_POINT('',(-2.144284366819E-02,0.716336353729,+ 1.552977284328));+#8974 = VECTOR('',#8975,1.);+#8975 = DIRECTION('',(-0.899760583068,0.436383882788,0.));+#8976 = PLANE('',#8977);+#8977 = AXIS2_PLACEMENT_3D('',#8978,#8979,#8980);+#8978 = CARTESIAN_POINT('',(-2.144284366819E-02,0.716336353729,+ 1.552977284328));+#8979 = DIRECTION('',(-0.436383882788,-0.899760583068,0.));+#8980 = DIRECTION('',(-0.899760583068,0.436383882788,0.));+#8981 = ADVANCED_FACE('',(#8982),#9007,.T.);+#8982 = FACE_BOUND('',#8983,.T.);+#8983 = EDGE_LOOP('',(#8984,#8985,#8993,#9001));+#8984 = ORIENTED_EDGE('',*,*,#8963,.T.);+#8985 = ORIENTED_EDGE('',*,*,#8986,.T.);+#8986 = EDGE_CURVE('',#8956,#8987,#8989,.T.);+#8987 = VERTEX_POINT('',#8988);+#8988 = CARTESIAN_POINT('',(-0.108667970454,0.804869857416,+ 1.558931852983));+#8989 = LINE('',#8990,#8991);+#8990 = CARTESIAN_POINT('',(-0.108667970454,0.75864054022,1.558931852983+ ));+#8991 = VECTOR('',#8992,1.);+#8992 = DIRECTION('',(1.110223024625E-16,1.,0.));+#8993 = ORIENTED_EDGE('',*,*,#8994,.F.);+#8994 = EDGE_CURVE('',#8995,#8987,#8997,.T.);+#8995 = VERTEX_POINT('',#8996);+#8996 = CARTESIAN_POINT('',(-0.108667970454,0.804869857416,+ 1.552977284328));+#8997 = LINE('',#8998,#8999);+#8998 = CARTESIAN_POINT('',(-0.108667970454,0.804869857416,+ 1.552977284328));+#8999 = VECTOR('',#9000,1.);+#9000 = DIRECTION('',(0.,0.,1.));+#9001 = ORIENTED_EDGE('',*,*,#9002,.F.);+#9002 = EDGE_CURVE('',#8964,#8995,#9003,.T.);+#9003 = LINE('',#9004,#9005);+#9004 = CARTESIAN_POINT('',(-0.108667970454,0.75864054022,1.552977284328+ ));+#9005 = VECTOR('',#9006,1.);+#9006 = DIRECTION('',(1.110223024625E-16,1.,0.));+#9007 = PLANE('',#9008);+#9008 = AXIS2_PLACEMENT_3D('',#9009,#9010,#9011);+#9009 = CARTESIAN_POINT('',(-0.108667970454,0.75864054022,1.552977284328+ ));+#9010 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9011 = DIRECTION('',(1.110223024625E-16,1.,0.));+#9012 = ADVANCED_FACE('',(#9013),#9038,.T.);+#9013 = FACE_BOUND('',#9014,.T.);+#9014 = EDGE_LOOP('',(#9015,#9016,#9024,#9032));+#9015 = ORIENTED_EDGE('',*,*,#8994,.T.);+#9016 = ORIENTED_EDGE('',*,*,#9017,.T.);+#9017 = EDGE_CURVE('',#8987,#9018,#9020,.T.);+#9018 = VERTEX_POINT('',#9019);+#9019 = CARTESIAN_POINT('',(2.289659578128E-02,0.737851885003,+ 1.558931852983));+#9020 = LINE('',#9021,#9022);+#9021 = CARTESIAN_POINT('',(-0.108667970454,0.804869857416,+ 1.558931852983));+#9022 = VECTOR('',#9023,1.);+#9023 = DIRECTION('',(0.89105452404,-0.453896282412,0.));+#9024 = ORIENTED_EDGE('',*,*,#9025,.F.);+#9025 = EDGE_CURVE('',#9026,#9018,#9028,.T.);+#9026 = VERTEX_POINT('',#9027);+#9027 = CARTESIAN_POINT('',(2.289659578128E-02,0.737851885003,+ 1.552977284328));+#9028 = LINE('',#9029,#9030);+#9029 = CARTESIAN_POINT('',(2.289659578128E-02,0.737851885003,+ 1.552977284328));+#9030 = VECTOR('',#9031,1.);+#9031 = DIRECTION('',(0.,0.,1.));+#9032 = ORIENTED_EDGE('',*,*,#9033,.F.);+#9033 = EDGE_CURVE('',#8995,#9026,#9034,.T.);+#9034 = LINE('',#9035,#9036);+#9035 = CARTESIAN_POINT('',(-0.108667970454,0.804869857416,+ 1.552977284328));+#9036 = VECTOR('',#9037,1.);+#9037 = DIRECTION('',(0.89105452404,-0.453896282412,0.));+#9038 = PLANE('',#9039);+#9039 = AXIS2_PLACEMENT_3D('',#9040,#9041,#9042);+#9040 = CARTESIAN_POINT('',(-0.108667970454,0.804869857416,+ 1.552977284328));+#9041 = DIRECTION('',(0.453896282412,0.89105452404,-0.));+#9042 = DIRECTION('',(0.89105452404,-0.453896282412,0.));+#9043 = ADVANCED_FACE('',(#9044),#9069,.T.);+#9044 = FACE_BOUND('',#9045,.T.);+#9045 = EDGE_LOOP('',(#9046,#9047,#9055,#9063));+#9046 = ORIENTED_EDGE('',*,*,#9025,.T.);+#9047 = ORIENTED_EDGE('',*,*,#9048,.T.);+#9048 = EDGE_CURVE('',#9018,#9049,#9051,.T.);+#9049 = VERTEX_POINT('',#9050);+#9050 = CARTESIAN_POINT('',(0.108377220031,0.737851885003,1.558931852983+ ));+#9051 = LINE('',#9052,#9053);+#9052 = CARTESIAN_POINT('',(2.289659578128E-02,0.737851885003,+ 1.558931852983));+#9053 = VECTOR('',#9054,1.);+#9054 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#9055 = ORIENTED_EDGE('',*,*,#9056,.F.);+#9056 = EDGE_CURVE('',#9057,#9049,#9059,.T.);+#9057 = VERTEX_POINT('',#9058);+#9058 = CARTESIAN_POINT('',(0.108377220031,0.737851885003,1.552977284328+ ));+#9059 = LINE('',#9060,#9061);+#9060 = CARTESIAN_POINT('',(0.108377220031,0.737851885003,1.552977284328+ ));+#9061 = VECTOR('',#9062,1.);+#9062 = DIRECTION('',(0.,0.,1.));+#9063 = ORIENTED_EDGE('',*,*,#9064,.F.);+#9064 = EDGE_CURVE('',#9026,#9057,#9065,.T.);+#9065 = LINE('',#9066,#9067);+#9066 = CARTESIAN_POINT('',(2.289659578128E-02,0.737851885003,+ 1.552977284328));+#9067 = VECTOR('',#9068,1.);+#9068 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#9069 = PLANE('',#9070);+#9070 = AXIS2_PLACEMENT_3D('',#9071,#9072,#9073);+#9071 = CARTESIAN_POINT('',(2.289659578128E-02,0.737851885003,+ 1.552977284328));+#9072 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#9073 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#9074 = ADVANCED_FACE('',(#9075),#9100,.T.);+#9075 = FACE_BOUND('',#9076,.T.);+#9076 = EDGE_LOOP('',(#9077,#9078,#9086,#9094));+#9077 = ORIENTED_EDGE('',*,*,#9056,.T.);+#9078 = ORIENTED_EDGE('',*,*,#9079,.T.);+#9079 = EDGE_CURVE('',#9049,#9080,#9082,.T.);+#9080 = VERTEX_POINT('',#9081);+#9081 = CARTESIAN_POINT('',(0.108377220031,0.694966197666,1.558931852983+ ));+#9082 = LINE('',#9083,#9084);+#9083 = CARTESIAN_POINT('',(0.108377220031,0.737851885003,1.558931852983+ ));+#9084 = VECTOR('',#9085,1.);+#9085 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9086 = ORIENTED_EDGE('',*,*,#9087,.F.);+#9087 = EDGE_CURVE('',#9088,#9080,#9090,.T.);+#9088 = VERTEX_POINT('',#9089);+#9089 = CARTESIAN_POINT('',(0.108377220031,0.694966197666,1.552977284328+ ));+#9090 = LINE('',#9091,#9092);+#9091 = CARTESIAN_POINT('',(0.108377220031,0.694966197666,1.552977284328+ ));+#9092 = VECTOR('',#9093,1.);+#9093 = DIRECTION('',(0.,0.,1.));+#9094 = ORIENTED_EDGE('',*,*,#9095,.F.);+#9095 = EDGE_CURVE('',#9057,#9088,#9096,.T.);+#9096 = LINE('',#9097,#9098);+#9097 = CARTESIAN_POINT('',(0.108377220031,0.737851885003,1.552977284328+ ));+#9098 = VECTOR('',#9099,1.);+#9099 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9100 = PLANE('',#9101);+#9101 = AXIS2_PLACEMENT_3D('',#9102,#9103,#9104);+#9102 = CARTESIAN_POINT('',(0.108377220031,0.737851885003,1.552977284328+ ));+#9103 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#9104 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9105 = ADVANCED_FACE('',(#9106),#9122,.T.);+#9106 = FACE_BOUND('',#9107,.T.);+#9107 = EDGE_LOOP('',(#9108,#9109,#9115,#9116));+#9108 = ORIENTED_EDGE('',*,*,#9087,.T.);+#9109 = ORIENTED_EDGE('',*,*,#9110,.T.);+#9110 = EDGE_CURVE('',#9080,#8855,#9111,.T.);+#9111 = LINE('',#9112,#9113);+#9112 = CARTESIAN_POINT('',(0.108377220031,0.694966197666,1.558931852983+ ));+#9113 = VECTOR('',#9114,1.);+#9114 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9115 = ORIENTED_EDGE('',*,*,#8852,.F.);+#9116 = ORIENTED_EDGE('',*,*,#9117,.F.);+#9117 = EDGE_CURVE('',#9088,#8853,#9118,.T.);+#9118 = LINE('',#9119,#9120);+#9119 = CARTESIAN_POINT('',(0.108377220031,0.694966197666,1.552977284328+ ));+#9120 = VECTOR('',#9121,1.);+#9121 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9122 = PLANE('',#9123);+#9123 = AXIS2_PLACEMENT_3D('',#9124,#9125,#9126);+#9124 = CARTESIAN_POINT('',(0.108377220031,0.694966197666,1.552977284328+ ));+#9125 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9126 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9127 = ADVANCED_FACE('',(#9128),#9139,.F.);+#9128 = FACE_BOUND('',#9129,.T.);+#9129 = EDGE_LOOP('',(#9130,#9131,#9132,#9133,#9134,#9135,#9136,#9137,+ #9138));+#9130 = ORIENTED_EDGE('',*,*,#8878,.T.);+#9131 = ORIENTED_EDGE('',*,*,#8909,.T.);+#9132 = ORIENTED_EDGE('',*,*,#8940,.T.);+#9133 = ORIENTED_EDGE('',*,*,#8971,.T.);+#9134 = ORIENTED_EDGE('',*,*,#9002,.T.);+#9135 = ORIENTED_EDGE('',*,*,#9033,.T.);+#9136 = ORIENTED_EDGE('',*,*,#9064,.T.);+#9137 = ORIENTED_EDGE('',*,*,#9095,.T.);+#9138 = ORIENTED_EDGE('',*,*,#9117,.T.);+#9139 = PLANE('',#9140);+#9140 = AXIS2_PLACEMENT_3D('',#9141,#9142,#9143);+#9141 = CARTESIAN_POINT('',(0.108377220031,0.626785223562,1.552977284328+ ));+#9142 = DIRECTION('',(0.,0.,1.));+#9143 = DIRECTION('',(1.110223024625E-16,1.,0.));+#9144 = ADVANCED_FACE('',(#9145),#9156,.T.);+#9145 = FACE_BOUND('',#9146,.F.);+#9146 = EDGE_LOOP('',(#9147,#9148,#9149,#9150,#9151,#9152,#9153,#9154,+ #9155));+#9147 = ORIENTED_EDGE('',*,*,#8862,.T.);+#9148 = ORIENTED_EDGE('',*,*,#8893,.T.);+#9149 = ORIENTED_EDGE('',*,*,#8924,.T.);+#9150 = ORIENTED_EDGE('',*,*,#8955,.T.);+#9151 = ORIENTED_EDGE('',*,*,#8986,.T.);+#9152 = ORIENTED_EDGE('',*,*,#9017,.T.);+#9153 = ORIENTED_EDGE('',*,*,#9048,.T.);+#9154 = ORIENTED_EDGE('',*,*,#9079,.T.);+#9155 = ORIENTED_EDGE('',*,*,#9110,.T.);+#9156 = PLANE('',#9157);+#9157 = AXIS2_PLACEMENT_3D('',#9158,#9159,#9160);+#9158 = CARTESIAN_POINT('',(0.108377220031,0.626785223562,1.558931852983+ ));+#9159 = DIRECTION('',(0.,0.,1.));+#9160 = DIRECTION('',(1.110223024625E-16,1.,0.));+#9161 = MANIFOLD_SOLID_BREP('',#9162);+#9162 = CLOSED_SHELL('',(#9163,#9203,#9234,#9265,#9298,#9331,#9364,#9397+ ,#9430,#9463,#9494,#9527,#9560,#9593,#9626,#9659,#9692,#9725,#9758,+ #9791,#9824,#9857,#9890,#9921,#9954,#9987,#10020,#10053,#10086,+ #10110,#10147));+#9163 = ADVANCED_FACE('',(#9164),#9198,.T.);+#9164 = FACE_BOUND('',#9165,.T.);+#9165 = EDGE_LOOP('',(#9166,#9176,#9184,#9192));+#9166 = ORIENTED_EDGE('',*,*,#9167,.T.);+#9167 = EDGE_CURVE('',#9168,#9170,#9172,.T.);+#9168 = VERTEX_POINT('',#9169);+#9169 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.552977284328));+#9170 = VERTEX_POINT('',#9171);+#9171 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.558931852983));+#9172 = LINE('',#9173,#9174);+#9173 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.552977284328));+#9174 = VECTOR('',#9175,1.);+#9175 = DIRECTION('',(0.,0.,1.));+#9176 = ORIENTED_EDGE('',*,*,#9177,.T.);+#9177 = EDGE_CURVE('',#9170,#9178,#9180,.T.);+#9178 = VERTEX_POINT('',#9179);+#9179 = CARTESIAN_POINT('',(1.12665788765E-02,0.862874566729,+ 1.558931852983));+#9180 = LINE('',#9181,#9182);+#9181 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.558931852983));+#9182 = VECTOR('',#9183,1.);+#9183 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9184 = ORIENTED_EDGE('',*,*,#9185,.F.);+#9185 = EDGE_CURVE('',#9186,#9178,#9188,.T.);+#9186 = VERTEX_POINT('',#9187);+#9187 = CARTESIAN_POINT('',(1.12665788765E-02,0.862874566729,+ 1.552977284328));+#9188 = LINE('',#9189,#9190);+#9189 = CARTESIAN_POINT('',(1.12665788765E-02,0.862874566729,+ 1.552977284328));+#9190 = VECTOR('',#9191,1.);+#9191 = DIRECTION('',(0.,0.,1.));+#9192 = ORIENTED_EDGE('',*,*,#9193,.F.);+#9193 = EDGE_CURVE('',#9168,#9186,#9194,.T.);+#9194 = LINE('',#9195,#9196);+#9195 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.552977284328));+#9196 = VECTOR('',#9197,1.);+#9197 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9198 = PLANE('',#9199);+#9199 = AXIS2_PLACEMENT_3D('',#9200,#9201,#9202);+#9200 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.552977284328));+#9201 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#9202 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9203 = ADVANCED_FACE('',(#9204),#9229,.T.);+#9204 = FACE_BOUND('',#9205,.T.);+#9205 = EDGE_LOOP('',(#9206,#9207,#9215,#9223));+#9206 = ORIENTED_EDGE('',*,*,#9185,.T.);+#9207 = ORIENTED_EDGE('',*,*,#9208,.T.);+#9208 = EDGE_CURVE('',#9178,#9209,#9211,.T.);+#9209 = VERTEX_POINT('',#9210);+#9210 = CARTESIAN_POINT('',(-2.653097606403E-02,0.862874566729,+ 1.558931852983));+#9211 = LINE('',#9212,#9213);+#9212 = CARTESIAN_POINT('',(1.12665788765E-02,0.862874566729,+ 1.558931852983));+#9213 = VECTOR('',#9214,1.);+#9214 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9215 = ORIENTED_EDGE('',*,*,#9216,.F.);+#9216 = EDGE_CURVE('',#9217,#9209,#9219,.T.);+#9217 = VERTEX_POINT('',#9218);+#9218 = CARTESIAN_POINT('',(-2.653097606403E-02,0.862874566729,+ 1.552977284328));+#9219 = LINE('',#9220,#9221);+#9220 = CARTESIAN_POINT('',(-2.653097606403E-02,0.862874566729,+ 1.552977284328));+#9221 = VECTOR('',#9222,1.);+#9222 = DIRECTION('',(0.,0.,1.));+#9223 = ORIENTED_EDGE('',*,*,#9224,.F.);+#9224 = EDGE_CURVE('',#9186,#9217,#9225,.T.);+#9225 = LINE('',#9226,#9227);+#9226 = CARTESIAN_POINT('',(1.12665788765E-02,0.862874566729,+ 1.552977284328));+#9227 = VECTOR('',#9228,1.);+#9228 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9229 = PLANE('',#9230);+#9230 = AXIS2_PLACEMENT_3D('',#9231,#9232,#9233);+#9231 = CARTESIAN_POINT('',(1.12665788765E-02,0.862874566729,+ 1.552977284328));+#9232 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9233 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9234 = ADVANCED_FACE('',(#9235),#9260,.T.);+#9235 = FACE_BOUND('',#9236,.T.);+#9236 = EDGE_LOOP('',(#9237,#9238,#9246,#9254));+#9237 = ORIENTED_EDGE('',*,*,#9216,.T.);+#9238 = ORIENTED_EDGE('',*,*,#9239,.T.);+#9239 = EDGE_CURVE('',#9209,#9240,#9242,.T.);+#9240 = VERTEX_POINT('',#9241);+#9241 = CARTESIAN_POINT('',(-2.653097606403E-02,0.885843850116,+ 1.558931852983));+#9242 = LINE('',#9243,#9244);+#9243 = CARTESIAN_POINT('',(-2.653097606403E-02,0.862874566729,+ 1.558931852983));+#9244 = VECTOR('',#9245,1.);+#9245 = DIRECTION('',(1.110223024625E-16,1.,0.));+#9246 = ORIENTED_EDGE('',*,*,#9247,.F.);+#9247 = EDGE_CURVE('',#9248,#9240,#9250,.T.);+#9248 = VERTEX_POINT('',#9249);+#9249 = CARTESIAN_POINT('',(-2.653097606403E-02,0.885843850116,+ 1.552977284328));+#9250 = LINE('',#9251,#9252);+#9251 = CARTESIAN_POINT('',(-2.653097606403E-02,0.885843850116,+ 1.552977284328));+#9252 = VECTOR('',#9253,1.);+#9253 = DIRECTION('',(0.,0.,1.));+#9254 = ORIENTED_EDGE('',*,*,#9255,.F.);+#9255 = EDGE_CURVE('',#9217,#9248,#9256,.T.);+#9256 = LINE('',#9257,#9258);+#9257 = CARTESIAN_POINT('',(-2.653097606403E-02,0.862874566729,+ 1.552977284328));+#9258 = VECTOR('',#9259,1.);+#9259 = DIRECTION('',(1.110223024625E-16,1.,0.));+#9260 = PLANE('',#9261);+#9261 = AXIS2_PLACEMENT_3D('',#9262,#9263,#9264);+#9262 = CARTESIAN_POINT('',(-2.653097606403E-02,0.862874566729,+ 1.552977284328));+#9263 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9264 = DIRECTION('',(1.110223024625E-16,1.,0.));+#9265 = ADVANCED_FACE('',(#9266),#9291,.T.);+#9266 = FACE_BOUND('',#9267,.T.);+#9267 = EDGE_LOOP('',(#9268,#9269,#9277,#9285));+#9268 = ORIENTED_EDGE('',*,*,#9247,.T.);+#9269 = ORIENTED_EDGE('',*,*,#9270,.T.);+#9270 = EDGE_CURVE('',#9240,#9271,#9273,.T.);+#9271 = VERTEX_POINT('',#9272);+#9272 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.558931852983));+#9273 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9274,#9275,#9276),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9274 = CARTESIAN_POINT('',(-2.653097606403E-02,0.885843850116,+ 1.558931852983));+#9275 = CARTESIAN_POINT('',(-2.653097606403E-02,0.90183512336,+ 1.558931852983));+#9276 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.558931852983));+#9277 = ORIENTED_EDGE('',*,*,#9278,.F.);+#9278 = EDGE_CURVE('',#9279,#9271,#9281,.T.);+#9279 = VERTEX_POINT('',#9280);+#9280 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.552977284328));+#9281 = LINE('',#9282,#9283);+#9282 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.552977284328));+#9283 = VECTOR('',#9284,1.);+#9284 = DIRECTION('',(0.,0.,1.));+#9285 = ORIENTED_EDGE('',*,*,#9286,.F.);+#9286 = EDGE_CURVE('',#9248,#9279,#9287,.T.);+#9287 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9288,#9289,#9290),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9288 = CARTESIAN_POINT('',(-2.653097606403E-02,0.885843850116,+ 1.552977284328));+#9289 = CARTESIAN_POINT('',(-2.653097606403E-02,0.90183512336,+ 1.552977284328));+#9290 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.552977284328));+#9291 = SURFACE_OF_LINEAR_EXTRUSION('',#9292,#9296);+#9292 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9293,#9294,#9295),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9293 = CARTESIAN_POINT('',(-2.653097606403E-02,0.885843850116,+ 1.552977284328));+#9294 = CARTESIAN_POINT('',(-2.653097606403E-02,0.90183512336,+ 1.552977284328));+#9295 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.552977284328));+#9296 = VECTOR('',#9297,1.);+#9297 = DIRECTION('',(-0.,-0.,-1.));+#9298 = ADVANCED_FACE('',(#9299),#9324,.T.);+#9299 = FACE_BOUND('',#9300,.T.);+#9300 = EDGE_LOOP('',(#9301,#9302,#9310,#9318));+#9301 = ORIENTED_EDGE('',*,*,#9278,.T.);+#9302 = ORIENTED_EDGE('',*,*,#9303,.T.);+#9303 = EDGE_CURVE('',#9271,#9304,#9306,.T.);+#9304 = VERTEX_POINT('',#9305);+#9305 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.558931852983));+#9306 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9307,#9308,#9309),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9307 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.558931852983));+#9308 = CARTESIAN_POINT('',(-3.917861944797E-02,0.919425523928,+ 1.558931852983));+#9309 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.558931852983));+#9310 = ORIENTED_EDGE('',*,*,#9311,.F.);+#9311 = EDGE_CURVE('',#9312,#9304,#9314,.T.);+#9312 = VERTEX_POINT('',#9313);+#9313 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.552977284328));+#9314 = LINE('',#9315,#9316);+#9315 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.552977284328));+#9316 = VECTOR('',#9317,1.);+#9317 = DIRECTION('',(0.,0.,1.));+#9318 = ORIENTED_EDGE('',*,*,#9319,.F.);+#9319 = EDGE_CURVE('',#9279,#9312,#9320,.T.);+#9320 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9321,#9322,#9323),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9321 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.552977284328));+#9322 = CARTESIAN_POINT('',(-3.917861944797E-02,0.919425523928,+ 1.552977284328));+#9323 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.552977284328));+#9324 = SURFACE_OF_LINEAR_EXTRUSION('',#9325,#9329);+#9325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9326,#9327,#9328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9326 = CARTESIAN_POINT('',(-3.2854797756E-02,0.910630323644,+ 1.552977284328));+#9327 = CARTESIAN_POINT('',(-3.917861944797E-02,0.919425523928,+ 1.552977284328));+#9328 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.552977284328));+#9329 = VECTOR('',#9330,1.);+#9330 = DIRECTION('',(-0.,-0.,-1.));+#9331 = ADVANCED_FACE('',(#9332),#9357,.T.);+#9332 = FACE_BOUND('',#9333,.T.);+#9333 = EDGE_LOOP('',(#9334,#9335,#9343,#9351));+#9334 = ORIENTED_EDGE('',*,*,#9311,.T.);+#9335 = ORIENTED_EDGE('',*,*,#9336,.T.);+#9336 = EDGE_CURVE('',#9304,#9337,#9339,.T.);+#9337 = VERTEX_POINT('',#9338);+#9338 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.558931852983));+#9339 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9340,#9341,#9342),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9340 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.558931852983));+#9341 = CARTESIAN_POINT('',(-6.272940368015E-02,0.919425523928,+ 1.558931852983));+#9342 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.558931852983));+#9343 = ORIENTED_EDGE('',*,*,#9344,.F.);+#9344 = EDGE_CURVE('',#9345,#9337,#9347,.T.);+#9345 = VERTEX_POINT('',#9346);+#9346 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.552977284328));+#9347 = LINE('',#9348,#9349);+#9348 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.552977284328));+#9349 = VECTOR('',#9350,1.);+#9350 = DIRECTION('',(0.,0.,1.));+#9351 = ORIENTED_EDGE('',*,*,#9352,.F.);+#9352 = EDGE_CURVE('',#9312,#9345,#9353,.T.);+#9353 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9354,#9355,#9356),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9354 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.552977284328));+#9355 = CARTESIAN_POINT('',(-6.272940368015E-02,0.919425523928,+ 1.552977284328));+#9356 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.552977284328));+#9357 = SURFACE_OF_LINEAR_EXTRUSION('',#9358,#9362);+#9358 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9359,#9360,#9361),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9359 = CARTESIAN_POINT('',(-5.066326114144E-02,0.919425523928,+ 1.552977284328));+#9360 = CARTESIAN_POINT('',(-6.272940368015E-02,0.919425523928,+ 1.552977284328));+#9361 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.552977284328));+#9362 = VECTOR('',#9363,1.);+#9363 = DIRECTION('',(-0.,-0.,-1.));+#9364 = ADVANCED_FACE('',(#9365),#9390,.T.);+#9365 = FACE_BOUND('',#9366,.T.);+#9366 = EDGE_LOOP('',(#9367,#9368,#9376,#9384));+#9367 = ORIENTED_EDGE('',*,*,#9344,.T.);+#9368 = ORIENTED_EDGE('',*,*,#9369,.T.);+#9369 = EDGE_CURVE('',#9337,#9370,#9372,.T.);+#9370 = VERTEX_POINT('',#9371);+#9371 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.558931852983));+#9372 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9373,#9374,#9375),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9373 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.558931852983));+#9374 = CARTESIAN_POINT('',(-7.624929833195E-02,0.90183512336,+ 1.558931852983));+#9375 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.558931852983));+#9376 = ORIENTED_EDGE('',*,*,#9377,.F.);+#9377 = EDGE_CURVE('',#9378,#9370,#9380,.T.);+#9378 = VERTEX_POINT('',#9379);+#9379 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.552977284328));+#9380 = LINE('',#9381,#9382);+#9381 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.552977284328));+#9382 = VECTOR('',#9383,1.);+#9383 = DIRECTION('',(0.,0.,1.));+#9384 = ORIENTED_EDGE('',*,*,#9385,.F.);+#9385 = EDGE_CURVE('',#9345,#9378,#9386,.T.);+#9386 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9387,#9388,#9389),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9387 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.552977284328));+#9388 = CARTESIAN_POINT('',(-7.624929833195E-02,0.90183512336,+ 1.552977284328));+#9389 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.552977284328));+#9390 = SURFACE_OF_LINEAR_EXTRUSION('',#9391,#9395);+#9391 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9392,#9393,#9394),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9392 = CARTESIAN_POINT('',(-6.948935100605E-02,0.910630323644,+ 1.552977284328));+#9393 = CARTESIAN_POINT('',(-7.624929833195E-02,0.90183512336,+ 1.552977284328));+#9394 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.552977284328));+#9395 = VECTOR('',#9396,1.);+#9396 = DIRECTION('',(-0.,-0.,-1.));+#9397 = ADVANCED_FACE('',(#9398),#9423,.T.);+#9398 = FACE_BOUND('',#9399,.T.);+#9399 = EDGE_LOOP('',(#9400,#9401,#9409,#9417));+#9400 = ORIENTED_EDGE('',*,*,#9377,.T.);+#9401 = ORIENTED_EDGE('',*,*,#9402,.T.);+#9402 = EDGE_CURVE('',#9370,#9403,#9405,.T.);+#9403 = VERTEX_POINT('',#9404);+#9404 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.558931852983));+#9405 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9406,#9407,#9408),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9406 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.558931852983));+#9407 = CARTESIAN_POINT('',(-7.624929833195E-02,0.873632332366,+ 1.558931852983));+#9408 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.558931852983));+#9409 = ORIENTED_EDGE('',*,*,#9410,.F.);+#9410 = EDGE_CURVE('',#9411,#9403,#9413,.T.);+#9411 = VERTEX_POINT('',#9412);+#9412 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.552977284328));+#9413 = LINE('',#9414,#9415);+#9414 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.552977284328));+#9415 = VECTOR('',#9416,1.);+#9416 = DIRECTION('',(0.,0.,1.));+#9417 = ORIENTED_EDGE('',*,*,#9418,.F.);+#9418 = EDGE_CURVE('',#9378,#9411,#9419,.T.);+#9419 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9420,#9421,#9422),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9420 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.552977284328));+#9421 = CARTESIAN_POINT('',(-7.624929833195E-02,0.873632332366,+ 1.552977284328));+#9422 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.552977284328));+#9423 = SURFACE_OF_LINEAR_EXTRUSION('',#9424,#9428);+#9424 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9425,#9426,#9427),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9425 = CARTESIAN_POINT('',(-7.624929833195E-02,0.885843850116,+ 1.552977284328));+#9426 = CARTESIAN_POINT('',(-7.624929833195E-02,0.873632332366,+ 1.552977284328));+#9427 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.552977284328));+#9428 = VECTOR('',#9429,1.);+#9429 = DIRECTION('',(-0.,-0.,-1.));+#9430 = ADVANCED_FACE('',(#9431),#9456,.T.);+#9431 = FACE_BOUND('',#9432,.T.);+#9432 = EDGE_LOOP('',(#9433,#9434,#9442,#9450));+#9433 = ORIENTED_EDGE('',*,*,#9410,.T.);+#9434 = ORIENTED_EDGE('',*,*,#9435,.T.);+#9435 = EDGE_CURVE('',#9403,#9436,#9438,.T.);+#9436 = VERTEX_POINT('',#9437);+#9437 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.558931852983));+#9438 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9439,#9440,#9441),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9439 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.558931852983));+#9440 = CARTESIAN_POINT('',(-7.014353945695E-02,0.845720291794,+ 1.558931852983));+#9441 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.558931852983));+#9442 = ORIENTED_EDGE('',*,*,#9443,.F.);+#9443 = EDGE_CURVE('',#9444,#9436,#9446,.T.);+#9444 = VERTEX_POINT('',#9445);+#9445 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.552977284328));+#9446 = LINE('',#9447,#9448);+#9447 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.552977284328));+#9448 = VECTOR('',#9449,1.);+#9449 = DIRECTION('',(0.,0.,1.));+#9450 = ORIENTED_EDGE('',*,*,#9451,.F.);+#9451 = EDGE_CURVE('',#9411,#9444,#9452,.T.);+#9452 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9453,#9454,#9455),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9453 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.552977284328));+#9454 = CARTESIAN_POINT('',(-7.014353945695E-02,0.845720291794,+ 1.552977284328));+#9455 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.552977284328));+#9456 = SURFACE_OF_LINEAR_EXTRUSION('',#9457,#9461);+#9457 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9458,#9459,#9460),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9458 = CARTESIAN_POINT('',(-7.319641889445E-02,0.85967631208,+ 1.552977284328));+#9459 = CARTESIAN_POINT('',(-7.014353945695E-02,0.845720291794,+ 1.552977284328));+#9460 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.552977284328));+#9461 = VECTOR('',#9462,1.);+#9462 = DIRECTION('',(-0.,-0.,-1.));+#9463 = ADVANCED_FACE('',(#9464),#9489,.T.);+#9464 = FACE_BOUND('',#9465,.T.);+#9465 = EDGE_LOOP('',(#9466,#9467,#9475,#9483));+#9466 = ORIENTED_EDGE('',*,*,#9443,.T.);+#9467 = ORIENTED_EDGE('',*,*,#9468,.T.);+#9468 = EDGE_CURVE('',#9436,#9469,#9471,.T.);+#9469 = VERTEX_POINT('',#9470);+#9470 = CARTESIAN_POINT('',(-0.103289087636,0.830746645029,+ 1.558931852983));+#9471 = LINE('',#9472,#9473);+#9472 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.558931852983));+#9473 = VECTOR('',#9474,1.);+#9474 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9475 = ORIENTED_EDGE('',*,*,#9476,.F.);+#9476 = EDGE_CURVE('',#9477,#9469,#9479,.T.);+#9477 = VERTEX_POINT('',#9478);+#9478 = CARTESIAN_POINT('',(-0.103289087636,0.830746645029,+ 1.552977284328));+#9479 = LINE('',#9480,#9481);+#9480 = CARTESIAN_POINT('',(-0.103289087636,0.830746645029,+ 1.552977284328));+#9481 = VECTOR('',#9482,1.);+#9482 = DIRECTION('',(0.,0.,1.));+#9483 = ORIENTED_EDGE('',*,*,#9484,.F.);+#9484 = EDGE_CURVE('',#9444,#9477,#9485,.T.);+#9485 = LINE('',#9486,#9487);+#9486 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.552977284328));+#9487 = VECTOR('',#9488,1.);+#9488 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9489 = PLANE('',#9490);+#9490 = AXIS2_PLACEMENT_3D('',#9491,#9492,#9493);+#9491 = CARTESIAN_POINT('',(-6.432853100456E-02,0.830746645029,+ 1.552977284328));+#9492 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9493 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9494 = ADVANCED_FACE('',(#9495),#9520,.T.);+#9495 = FACE_BOUND('',#9496,.T.);+#9496 = EDGE_LOOP('',(#9497,#9498,#9506,#9514));+#9497 = ORIENTED_EDGE('',*,*,#9476,.T.);+#9498 = ORIENTED_EDGE('',*,*,#9499,.T.);+#9499 = EDGE_CURVE('',#9469,#9500,#9502,.T.);+#9500 = VERTEX_POINT('',#9501);+#9501 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.558931852983));+#9502 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9503,#9504,#9505),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9503 = CARTESIAN_POINT('',(-0.103289087636,0.830746645029,+ 1.558931852983));+#9504 = CARTESIAN_POINT('',(-0.107795719186,0.845720291794,+ 1.558931852983));+#9505 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.558931852983));+#9506 = ORIENTED_EDGE('',*,*,#9507,.F.);+#9507 = EDGE_CURVE('',#9508,#9500,#9510,.T.);+#9508 = VERTEX_POINT('',#9509);+#9509 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.552977284328));+#9510 = LINE('',#9511,#9512);+#9511 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.552977284328));+#9512 = VECTOR('',#9513,1.);+#9513 = DIRECTION('',(0.,0.,1.));+#9514 = ORIENTED_EDGE('',*,*,#9515,.F.);+#9515 = EDGE_CURVE('',#9477,#9508,#9516,.T.);+#9516 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9517,#9518,#9519),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9517 = CARTESIAN_POINT('',(-0.103289087636,0.830746645029,+ 1.552977284328));+#9518 = CARTESIAN_POINT('',(-0.107795719186,0.845720291794,+ 1.552977284328));+#9519 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.552977284328));+#9520 = SURFACE_OF_LINEAR_EXTRUSION('',#9521,#9525);+#9521 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9522,#9523,#9524),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9522 = CARTESIAN_POINT('',(-0.103289087636,0.830746645029,+ 1.552977284328));+#9523 = CARTESIAN_POINT('',(-0.107795719186,0.845720291794,+ 1.552977284328));+#9524 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.552977284328));+#9525 = VECTOR('',#9526,1.);+#9526 = DIRECTION('',(-0.,-0.,-1.));+#9527 = ADVANCED_FACE('',(#9528),#9553,.T.);+#9528 = FACE_BOUND('',#9529,.T.);+#9529 = EDGE_LOOP('',(#9530,#9531,#9539,#9547));+#9530 = ORIENTED_EDGE('',*,*,#9507,.T.);+#9531 = ORIENTED_EDGE('',*,*,#9532,.T.);+#9532 = EDGE_CURVE('',#9500,#9533,#9535,.T.);+#9533 = VERTEX_POINT('',#9534);+#9534 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.558931852983));+#9535 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9536,#9537,#9538),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9536 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.558931852983));+#9537 = CARTESIAN_POINT('',(-0.112593101159,0.874795334056,+ 1.558931852983));+#9538 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.558931852983));+#9539 = ORIENTED_EDGE('',*,*,#9540,.F.);+#9540 = EDGE_CURVE('',#9541,#9533,#9543,.T.);+#9541 = VERTEX_POINT('',#9542);+#9542 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.552977284328));+#9543 = LINE('',#9544,#9545);+#9544 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.552977284328));+#9545 = VECTOR('',#9546,1.);+#9546 = DIRECTION('',(0.,0.,1.));+#9547 = ORIENTED_EDGE('',*,*,#9548,.F.);+#9548 = EDGE_CURVE('',#9508,#9541,#9549,.T.);+#9549 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9550,#9551,#9552),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9550 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.552977284328));+#9551 = CARTESIAN_POINT('',(-0.112593101159,0.874795334056,+ 1.552977284328));+#9552 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.552977284328));+#9553 = SURFACE_OF_LINEAR_EXTRUSION('',#9554,#9558);+#9554 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9555,#9556,#9557),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9555 = CARTESIAN_POINT('',(-0.110194410173,0.860257812925,+ 1.552977284328));+#9556 = CARTESIAN_POINT('',(-0.112593101159,0.874795334056,+ 1.552977284328));+#9557 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.552977284328));+#9558 = VECTOR('',#9559,1.);+#9559 = DIRECTION('',(-0.,-0.,-1.));+#9560 = ADVANCED_FACE('',(#9561),#9586,.T.);+#9561 = FACE_BOUND('',#9562,.T.);+#9562 = EDGE_LOOP('',(#9563,#9564,#9572,#9580));+#9563 = ORIENTED_EDGE('',*,*,#9540,.T.);+#9564 = ORIENTED_EDGE('',*,*,#9565,.T.);+#9565 = EDGE_CURVE('',#9533,#9566,#9568,.T.);+#9566 = VERTEX_POINT('',#9567);+#9567 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.558931852983));+#9568 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9569,#9570,#9571),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9569 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.558931852983));+#9570 = CARTESIAN_POINT('',(-0.112593101159,0.922478403366,+ 1.558931852983));+#9571 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.558931852983));+#9572 = ORIENTED_EDGE('',*,*,#9573,.F.);+#9573 = EDGE_CURVE('',#9574,#9566,#9576,.T.);+#9574 = VERTEX_POINT('',#9575);+#9575 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.552977284328));+#9576 = LINE('',#9577,#9578);+#9577 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.552977284328));+#9578 = VECTOR('',#9579,1.);+#9579 = DIRECTION('',(0.,0.,1.));+#9580 = ORIENTED_EDGE('',*,*,#9581,.F.);+#9581 = EDGE_CURVE('',#9541,#9574,#9582,.T.);+#9582 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9583,#9584,#9585),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9583 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.552977284328));+#9584 = CARTESIAN_POINT('',(-0.112593101159,0.922478403366,+ 1.552977284328));+#9585 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.552977284328));+#9586 = SURFACE_OF_LINEAR_EXTRUSION('',#9587,#9591);+#9587 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9588,#9589,#9590),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9588 = CARTESIAN_POINT('',(-0.112593101159,0.888169853497,+ 1.552977284328));+#9589 = CARTESIAN_POINT('',(-0.112593101159,0.922478403366,+ 1.552977284328));+#9590 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.552977284328));+#9591 = VECTOR('',#9592,1.);+#9592 = DIRECTION('',(-0.,-0.,-1.));+#9593 = ADVANCED_FACE('',(#9594),#9619,.T.);+#9594 = FACE_BOUND('',#9595,.T.);+#9595 = EDGE_LOOP('',(#9596,#9597,#9605,#9613));+#9596 = ORIENTED_EDGE('',*,*,#9573,.T.);+#9597 = ORIENTED_EDGE('',*,*,#9598,.T.);+#9598 = EDGE_CURVE('',#9566,#9599,#9601,.T.);+#9599 = VERTEX_POINT('',#9600);+#9600 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.558931852983));+#9601 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9602,#9603,#9604),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9602 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.558931852983));+#9603 = CARTESIAN_POINT('',(-8.264580762958E-02,0.960857459152,+ 1.558931852983));+#9604 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.558931852983));+#9605 = ORIENTED_EDGE('',*,*,#9606,.F.);+#9606 = EDGE_CURVE('',#9607,#9599,#9609,.T.);+#9607 = VERTEX_POINT('',#9608);+#9608 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.552977284328));+#9609 = LINE('',#9610,#9611);+#9610 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.552977284328));+#9611 = VECTOR('',#9612,1.);+#9612 = DIRECTION('',(0.,0.,1.));+#9613 = ORIENTED_EDGE('',*,*,#9614,.F.);+#9614 = EDGE_CURVE('',#9574,#9607,#9615,.T.);+#9615 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9616,#9617,#9618),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9616 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.552977284328));+#9617 = CARTESIAN_POINT('',(-8.264580762958E-02,0.960857459152,+ 1.552977284328));+#9618 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.552977284328));+#9619 = SURFACE_OF_LINEAR_EXTRUSION('',#9620,#9624);+#9620 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9621,#9622,#9623),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9621 = CARTESIAN_POINT('',(-9.761945439449E-02,0.941667931259,+ 1.552977284328));+#9622 = CARTESIAN_POINT('',(-8.264580762958E-02,0.960857459152,+ 1.552977284328));+#9623 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.552977284328));+#9624 = VECTOR('',#9625,1.);+#9625 = DIRECTION('',(-0.,-0.,-1.));+#9626 = ADVANCED_FACE('',(#9627),#9652,.T.);+#9627 = FACE_BOUND('',#9628,.T.);+#9628 = EDGE_LOOP('',(#9629,#9630,#9638,#9646));+#9629 = ORIENTED_EDGE('',*,*,#9606,.T.);+#9630 = ORIENTED_EDGE('',*,*,#9631,.T.);+#9631 = EDGE_CURVE('',#9599,#9632,#9634,.T.);+#9632 = VERTEX_POINT('',#9633);+#9633 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.558931852983));+#9634 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9635,#9636,#9637),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9635 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.558931852983));+#9636 = CARTESIAN_POINT('',(-3.699799127833E-02,0.960857459152,+ 1.558931852983));+#9637 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.558931852983));+#9638 = ORIENTED_EDGE('',*,*,#9639,.F.);+#9639 = EDGE_CURVE('',#9640,#9632,#9642,.T.);+#9640 = VERTEX_POINT('',#9641);+#9641 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.552977284328));+#9642 = LINE('',#9643,#9644);+#9643 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.552977284328));+#9644 = VECTOR('',#9645,1.);+#9645 = DIRECTION('',(0.,0.,1.));+#9646 = ORIENTED_EDGE('',*,*,#9647,.F.);+#9647 = EDGE_CURVE('',#9607,#9640,#9648,.T.);+#9648 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9649,#9650,#9651),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9649 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.552977284328));+#9650 = CARTESIAN_POINT('',(-3.699799127833E-02,0.960857459152,+ 1.552977284328));+#9651 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.552977284328));+#9652 = SURFACE_OF_LINEAR_EXTRUSION('',#9653,#9657);+#9653 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9654,#9655,#9656),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9654 = CARTESIAN_POINT('',(-5.633289438252E-02,0.960857459152,+ 1.552977284328));+#9655 = CARTESIAN_POINT('',(-3.699799127833E-02,0.960857459152,+ 1.552977284328));+#9656 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.552977284328));+#9657 = VECTOR('',#9658,1.);+#9658 = DIRECTION('',(-0.,-0.,-1.));+#9659 = ADVANCED_FACE('',(#9660),#9685,.T.);+#9660 = FACE_BOUND('',#9661,.T.);+#9661 = EDGE_LOOP('',(#9662,#9663,#9671,#9679));+#9662 = ORIENTED_EDGE('',*,*,#9639,.T.);+#9663 = ORIENTED_EDGE('',*,*,#9664,.T.);+#9664 = EDGE_CURVE('',#9632,#9665,#9667,.T.);+#9665 = VERTEX_POINT('',#9666);+#9666 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.558931852983));+#9667 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9668,#9669,#9670),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9668 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.558931852983));+#9669 = CARTESIAN_POINT('',(-1.242958056698E-02,0.938760427033,+ 1.558931852983));+#9670 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.558931852983));+#9671 = ORIENTED_EDGE('',*,*,#9672,.F.);+#9672 = EDGE_CURVE('',#9673,#9665,#9675,.T.);+#9673 = VERTEX_POINT('',#9674);+#9674 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.552977284328));+#9675 = LINE('',#9676,#9677);+#9676 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.552977284328));+#9677 = VECTOR('',#9678,1.);+#9678 = DIRECTION('',(0.,0.,1.));+#9679 = ORIENTED_EDGE('',*,*,#9680,.F.);+#9680 = EDGE_CURVE('',#9640,#9673,#9681,.T.);+#9681 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9682,#9683,#9684),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9682 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.552977284328));+#9683 = CARTESIAN_POINT('',(-1.242958056698E-02,0.938760427033,+ 1.552977284328));+#9684 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.552977284328));+#9685 = SURFACE_OF_LINEAR_EXTRUSION('',#9686,#9690);+#9686 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9687,#9688,#9689),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9687 = CARTESIAN_POINT('',(-2.471378592265E-02,0.949808943092,+ 1.552977284328));+#9688 = CARTESIAN_POINT('',(-1.242958056698E-02,0.938760427033,+ 1.552977284328));+#9689 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.552977284328));+#9690 = VECTOR('',#9691,1.);+#9691 = DIRECTION('',(-0.,-0.,-1.));+#9692 = ADVANCED_FACE('',(#9693),#9718,.T.);+#9693 = FACE_BOUND('',#9694,.T.);+#9694 = EDGE_LOOP('',(#9695,#9696,#9704,#9712));+#9695 = ORIENTED_EDGE('',*,*,#9672,.T.);+#9696 = ORIENTED_EDGE('',*,*,#9697,.T.);+#9697 = EDGE_CURVE('',#9665,#9698,#9700,.T.);+#9698 = VERTEX_POINT('',#9699);+#9699 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.558931852983));+#9700 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9701,#9702,#9703),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9701 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.558931852983));+#9702 = CARTESIAN_POINT('',(-4.579319156257E-03,0.941522556047,+ 1.558931852983));+#9703 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.558931852983));+#9704 = ORIENTED_EDGE('',*,*,#9705,.F.);+#9705 = EDGE_CURVE('',#9706,#9698,#9708,.T.);+#9706 = VERTEX_POINT('',#9707);+#9707 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.552977284328));+#9708 = LINE('',#9709,#9710);+#9709 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.552977284328));+#9710 = VECTOR('',#9711,1.);+#9711 = DIRECTION('',(0.,0.,1.));+#9712 = ORIENTED_EDGE('',*,*,#9713,.F.);+#9713 = EDGE_CURVE('',#9673,#9706,#9714,.T.);+#9714 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9715,#9716,#9717),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9715 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.552977284328));+#9716 = CARTESIAN_POINT('',(-4.579319156257E-03,0.941522556047,+ 1.552977284328));+#9717 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.552977284328));+#9718 = SURFACE_OF_LINEAR_EXTRUSION('',#9719,#9723);+#9719 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9720,#9721,#9722),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9720 = CARTESIAN_POINT('',(-8.649825072929E-03,0.918262522238,+ 1.552977284328));+#9721 = CARTESIAN_POINT('',(-4.579319156257E-03,0.941522556047,+ 1.552977284328));+#9722 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.552977284328));+#9723 = VECTOR('',#9724,1.);+#9724 = DIRECTION('',(-0.,-0.,-1.));+#9725 = ADVANCED_FACE('',(#9726),#9751,.T.);+#9726 = FACE_BOUND('',#9727,.T.);+#9727 = EDGE_LOOP('',(#9728,#9729,#9737,#9745));+#9728 = ORIENTED_EDGE('',*,*,#9705,.T.);+#9729 = ORIENTED_EDGE('',*,*,#9730,.T.);+#9730 = EDGE_CURVE('',#9698,#9731,#9733,.T.);+#9731 = VERTEX_POINT('',#9732);+#9732 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.558931852983));+#9733 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9734,#9735,#9736),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9734 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.558931852983));+#9735 = CARTESIAN_POINT('',(2.435034789438E-02,0.965945591548,+ 1.558931852983));+#9736 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.558931852983));+#9737 = ORIENTED_EDGE('',*,*,#9738,.F.);+#9738 = EDGE_CURVE('',#9739,#9731,#9741,.T.);+#9739 = VERTEX_POINT('',#9740);+#9740 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.552977284328));+#9741 = LINE('',#9742,#9743);+#9742 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.552977284328));+#9743 = VECTOR('',#9744,1.);+#9744 = DIRECTION('',(0.,0.,1.));+#9745 = ORIENTED_EDGE('',*,*,#9746,.F.);+#9746 = EDGE_CURVE('',#9706,#9739,#9747,.T.);+#9747 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9748,#9749,#9750),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9748 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.552977284328));+#9749 = CARTESIAN_POINT('',(2.435034789438E-02,0.965945591548,+ 1.552977284328));+#9750 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.552977284328));+#9751 = SURFACE_OF_LINEAR_EXTRUSION('',#9752,#9756);+#9752 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9753,#9754,#9755),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9753 = CARTESIAN_POINT('',(9.885514369062E-03,0.953734073798,+ 1.552977284328));+#9754 = CARTESIAN_POINT('',(2.435034789438E-02,0.965945591548,+ 1.552977284328));+#9755 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.552977284328));+#9756 = VECTOR('',#9757,1.);+#9757 = DIRECTION('',(-0.,-0.,-1.));+#9758 = ADVANCED_FACE('',(#9759),#9784,.T.);+#9759 = FACE_BOUND('',#9760,.T.);+#9760 = EDGE_LOOP('',(#9761,#9762,#9770,#9778));+#9761 = ORIENTED_EDGE('',*,*,#9738,.T.);+#9762 = ORIENTED_EDGE('',*,*,#9763,.T.);+#9763 = EDGE_CURVE('',#9731,#9764,#9766,.T.);+#9764 = VERTEX_POINT('',#9765);+#9765 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.558931852983));+#9766 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9767,#9768,#9769),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9767 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.558931852983));+#9768 = CARTESIAN_POINT('',(7.944755298077E-02,0.965945591548,+ 1.558931852983));+#9769 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.558931852983));+#9770 = ORIENTED_EDGE('',*,*,#9771,.F.);+#9771 = EDGE_CURVE('',#9772,#9764,#9774,.T.);+#9772 = VERTEX_POINT('',#9773);+#9773 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.552977284328));+#9774 = LINE('',#9775,#9776);+#9775 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.552977284328));+#9776 = VECTOR('',#9777,1.);+#9777 = DIRECTION('',(0.,0.,1.));+#9778 = ORIENTED_EDGE('',*,*,#9779,.F.);+#9779 = EDGE_CURVE('',#9739,#9772,#9780,.T.);+#9780 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9781,#9782,#9783),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9781 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.552977284328));+#9782 = CARTESIAN_POINT('',(7.944755298077E-02,0.965945591548,+ 1.552977284328));+#9783 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.552977284328));+#9784 = SURFACE_OF_LINEAR_EXTRUSION('',#9785,#9789);+#9785 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9786,#9787,#9788),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9786 = CARTESIAN_POINT('',(4.790113212656E-02,0.965945591548,+ 1.552977284328));+#9787 = CARTESIAN_POINT('',(7.944755298077E-02,0.965945591548,+ 1.552977284328));+#9788 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.552977284328));+#9789 = VECTOR('',#9790,1.);+#9790 = DIRECTION('',(-0.,-0.,-1.));+#9791 = ADVANCED_FACE('',(#9792),#9817,.T.);+#9792 = FACE_BOUND('',#9793,.T.);+#9793 = EDGE_LOOP('',(#9794,#9795,#9803,#9811));+#9794 = ORIENTED_EDGE('',*,*,#9771,.T.);+#9795 = ORIENTED_EDGE('',*,*,#9796,.T.);+#9796 = EDGE_CURVE('',#9764,#9797,#9799,.T.);+#9797 = VERTEX_POINT('',#9798);+#9798 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.558931852983+ ));+#9799 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9800,#9801,#9802),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9800 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.558931852983));+#9801 = CARTESIAN_POINT('',(0.112593101159,0.925531282803,1.558931852983+ ));+#9802 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.558931852983+ ));+#9803 = ORIENTED_EDGE('',*,*,#9804,.F.);+#9804 = EDGE_CURVE('',#9805,#9797,#9807,.T.);+#9805 = VERTEX_POINT('',#9806);+#9806 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.552977284328+ ));+#9807 = LINE('',#9808,#9809);+#9808 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.552977284328+ ));+#9809 = VECTOR('',#9810,1.);+#9810 = DIRECTION('',(0.,0.,1.));+#9811 = ORIENTED_EDGE('',*,*,#9812,.F.);+#9812 = EDGE_CURVE('',#9772,#9805,#9813,.T.);+#9813 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9814,#9815,#9816),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9814 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.552977284328));+#9815 = CARTESIAN_POINT('',(0.112593101159,0.925531282803,1.552977284328+ ));+#9816 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.552977284328+ ));+#9817 = SURFACE_OF_LINEAR_EXTRUSION('',#9818,#9822);+#9818 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9819,#9820,#9821),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9819 = CARTESIAN_POINT('',(9.602032707008E-02,0.945738437175,+ 1.552977284328));+#9820 = CARTESIAN_POINT('',(0.112593101159,0.925531282803,1.552977284328+ ));+#9821 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.552977284328+ ));+#9822 = VECTOR('',#9823,1.);+#9823 = DIRECTION('',(-0.,-0.,-1.));+#9824 = ADVANCED_FACE('',(#9825),#9850,.T.);+#9825 = FACE_BOUND('',#9826,.T.);+#9826 = EDGE_LOOP('',(#9827,#9828,#9836,#9844));+#9827 = ORIENTED_EDGE('',*,*,#9804,.T.);+#9828 = ORIENTED_EDGE('',*,*,#9829,.T.);+#9829 = EDGE_CURVE('',#9797,#9830,#9832,.T.);+#9830 = VERTEX_POINT('',#9831);+#9831 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.558931852983)+ );+#9832 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9833,#9834,#9835),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9833 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.558931852983+ ));+#9834 = CARTESIAN_POINT('',(0.112593101159,0.870579452928,1.558931852983+ ));+#9835 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.558931852983)+ );+#9836 = ORIENTED_EDGE('',*,*,#9837,.F.);+#9837 = EDGE_CURVE('',#9838,#9830,#9840,.T.);+#9838 = VERTEX_POINT('',#9839);+#9839 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.552977284328)+ );+#9840 = LINE('',#9841,#9842);+#9841 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.552977284328)+ );+#9842 = VECTOR('',#9843,1.);+#9843 = DIRECTION('',(0.,0.,1.));+#9844 = ORIENTED_EDGE('',*,*,#9845,.F.);+#9845 = EDGE_CURVE('',#9805,#9838,#9846,.T.);+#9846 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9847,#9848,#9849),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9847 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.552977284328+ ));+#9848 = CARTESIAN_POINT('',(0.112593101159,0.870579452928,1.552977284328+ ));+#9849 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.552977284328)+ );+#9850 = SURFACE_OF_LINEAR_EXTRUSION('',#9851,#9855);+#9851 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9852,#9853,#9854),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9852 = CARTESIAN_POINT('',(0.112593101159,0.887006851806,1.552977284328+ ));+#9853 = CARTESIAN_POINT('',(0.112593101159,0.870579452928,1.552977284328+ ));+#9854 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.552977284328)+ );+#9855 = VECTOR('',#9856,1.);+#9856 = DIRECTION('',(-0.,-0.,-1.));+#9857 = ADVANCED_FACE('',(#9858),#9883,.T.);+#9858 = FACE_BOUND('',#9859,.T.);+#9859 = EDGE_LOOP('',(#9860,#9861,#9869,#9877));+#9860 = ORIENTED_EDGE('',*,*,#9837,.T.);+#9861 = ORIENTED_EDGE('',*,*,#9862,.T.);+#9862 = EDGE_CURVE('',#9830,#9863,#9865,.T.);+#9863 = VERTEX_POINT('',#9864);+#9864 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.558931852983+ ));+#9865 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9866,#9867,#9868),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9866 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.558931852983)+ );+#9867 = CARTESIAN_POINT('',(0.10706884313,0.838742281652,1.558931852983)+ );+#9868 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.558931852983+ ));+#9869 = ORIENTED_EDGE('',*,*,#9870,.F.);+#9870 = EDGE_CURVE('',#9871,#9863,#9873,.T.);+#9871 = VERTEX_POINT('',#9872);+#9872 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.552977284328+ ));+#9873 = LINE('',#9874,#9875);+#9874 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.552977284328+ ));+#9875 = VECTOR('',#9876,1.);+#9876 = DIRECTION('',(0.,0.,1.));+#9877 = ORIENTED_EDGE('',*,*,#9878,.F.);+#9878 = EDGE_CURVE('',#9838,#9871,#9879,.T.);+#9879 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9880,#9881,#9882),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9880 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.552977284328)+ );+#9881 = CARTESIAN_POINT('',(0.10706884313,0.838742281652,1.552977284328)+ );+#9882 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.552977284328+ ));+#9883 = SURFACE_OF_LINEAR_EXTRUSION('',#9884,#9888);+#9884 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9885,#9886,#9887),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9885 = CARTESIAN_POINT('',(0.109830972145,0.85466086729,1.552977284328)+ );+#9886 = CARTESIAN_POINT('',(0.10706884313,0.838742281652,1.552977284328)+ );+#9887 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.552977284328+ ));+#9888 = VECTOR('',#9889,1.);+#9889 = DIRECTION('',(-0.,-0.,-1.));+#9890 = ADVANCED_FACE('',(#9891),#9916,.T.);+#9891 = FACE_BOUND('',#9892,.T.);+#9892 = EDGE_LOOP('',(#9893,#9894,#9902,#9910));+#9893 = ORIENTED_EDGE('',*,*,#9870,.T.);+#9894 = ORIENTED_EDGE('',*,*,#9895,.T.);+#9895 = EDGE_CURVE('',#9863,#9896,#9898,.T.);+#9896 = VERTEX_POINT('',#9897);+#9897 = CARTESIAN_POINT('',(6.20025276236E-02,0.824204760521,+ 1.558931852983));+#9898 = LINE('',#9899,#9900);+#9899 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.558931852983+ ));+#9900 = VECTOR('',#9901,1.);+#9901 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9902 = ORIENTED_EDGE('',*,*,#9903,.F.);+#9903 = EDGE_CURVE('',#9904,#9896,#9906,.T.);+#9904 = VERTEX_POINT('',#9905);+#9905 = CARTESIAN_POINT('',(6.20025276236E-02,0.824204760521,+ 1.552977284328));+#9906 = LINE('',#9907,#9908);+#9907 = CARTESIAN_POINT('',(6.20025276236E-02,0.824204760521,+ 1.552977284328));+#9908 = VECTOR('',#9909,1.);+#9909 = DIRECTION('',(0.,0.,1.));+#9910 = ORIENTED_EDGE('',*,*,#9911,.F.);+#9911 = EDGE_CURVE('',#9871,#9904,#9912,.T.);+#9912 = LINE('',#9913,#9914);+#9913 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.552977284328+ ));+#9914 = VECTOR('',#9915,1.);+#9915 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9916 = PLANE('',#9917);+#9917 = AXIS2_PLACEMENT_3D('',#9918,#9919,#9920);+#9918 = CARTESIAN_POINT('',(0.101835335522,0.824204760521,1.552977284328+ ));+#9919 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#9920 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#9921 = ADVANCED_FACE('',(#9922),#9947,.T.);+#9922 = FACE_BOUND('',#9923,.T.);+#9923 = EDGE_LOOP('',(#9924,#9925,#9933,#9941));+#9924 = ORIENTED_EDGE('',*,*,#9903,.T.);+#9925 = ORIENTED_EDGE('',*,*,#9926,.T.);+#9926 = EDGE_CURVE('',#9896,#9927,#9929,.T.);+#9927 = VERTEX_POINT('',#9928);+#9928 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.558931852983));+#9929 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9930,#9931,#9932),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9930 = CARTESIAN_POINT('',(6.20025276236E-02,0.824204760521,+ 1.558931852983));+#9931 = CARTESIAN_POINT('',(6.883516255516E-02,0.837870030384,+ 1.558931852983));+#9932 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.558931852983));+#9933 = ORIENTED_EDGE('',*,*,#9934,.F.);+#9934 = EDGE_CURVE('',#9935,#9927,#9937,.T.);+#9935 = VERTEX_POINT('',#9936);+#9936 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.552977284328));+#9937 = LINE('',#9938,#9939);+#9938 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.552977284328));+#9939 = VECTOR('',#9940,1.);+#9940 = DIRECTION('',(0.,0.,1.));+#9941 = ORIENTED_EDGE('',*,*,#9942,.F.);+#9942 = EDGE_CURVE('',#9904,#9935,#9943,.T.);+#9943 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9944,#9945,#9946),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9944 = CARTESIAN_POINT('',(6.20025276236E-02,0.824204760521,+ 1.552977284328));+#9945 = CARTESIAN_POINT('',(6.883516255516E-02,0.837870030384,+ 1.552977284328));+#9946 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.552977284328));+#9947 = SURFACE_OF_LINEAR_EXTRUSION('',#9948,#9952);+#9948 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9949,#9950,#9951),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9949 = CARTESIAN_POINT('',(6.20025276236E-02,0.824204760521,+ 1.552977284328));+#9950 = CARTESIAN_POINT('',(6.883516255516E-02,0.837870030384,+ 1.552977284328));+#9951 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.552977284328));+#9952 = VECTOR('',#9953,1.);+#9953 = DIRECTION('',(-0.,-0.,-1.));+#9954 = ADVANCED_FACE('',(#9955),#9980,.T.);+#9955 = FACE_BOUND('',#9956,.T.);+#9956 = EDGE_LOOP('',(#9957,#9958,#9966,#9974));+#9957 = ORIENTED_EDGE('',*,*,#9934,.T.);+#9958 = ORIENTED_EDGE('',*,*,#9959,.T.);+#9959 = EDGE_CURVE('',#9927,#9960,#9962,.T.);+#9960 = VERTEX_POINT('',#9961);+#9961 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.558931852983));+#9962 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9963,#9964,#9965),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9963 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.558931852983));+#9964 = CARTESIAN_POINT('',(7.595854790934E-02,0.869561826449,+ 1.558931852983));+#9965 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.558931852983));+#9966 = ORIENTED_EDGE('',*,*,#9967,.F.);+#9967 = EDGE_CURVE('',#9968,#9960,#9970,.T.);+#9968 = VERTEX_POINT('',#9969);+#9969 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.552977284328));+#9970 = LINE('',#9971,#9972);+#9971 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.552977284328));+#9972 = VECTOR('',#9973,1.);+#9973 = DIRECTION('',(0.,0.,1.));+#9974 = ORIENTED_EDGE('',*,*,#9975,.F.);+#9975 = EDGE_CURVE('',#9935,#9968,#9976,.T.);+#9976 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9977,#9978,#9979),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9977 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.552977284328));+#9978 = CARTESIAN_POINT('',(7.595854790934E-02,0.869561826449,+ 1.552977284328));+#9979 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.552977284328));+#9980 = SURFACE_OF_LINEAR_EXTRUSION('',#9981,#9985);+#9981 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9982,#9983,#9984),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9982 = CARTESIAN_POINT('',(7.239685523225E-02,0.853715928416,+ 1.552977284328));+#9983 = CARTESIAN_POINT('',(7.595854790934E-02,0.869561826449,+ 1.552977284328));+#9984 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.552977284328));+#9985 = VECTOR('',#9986,1.);+#9986 = DIRECTION('',(-0.,-0.,-1.));+#9987 = ADVANCED_FACE('',(#9988),#10013,.T.);+#9988 = FACE_BOUND('',#9989,.T.);+#9989 = EDGE_LOOP('',(#9990,#9991,#9999,#10007));+#9990 = ORIENTED_EDGE('',*,*,#9967,.T.);+#9991 = ORIENTED_EDGE('',*,*,#9992,.T.);+#9992 = EDGE_CURVE('',#9960,#9993,#9995,.T.);+#9993 = VERTEX_POINT('',#9994);+#9994 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.558931852983));+#9995 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9996,#9997,#9998),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9996 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.558931852983));+#9997 = CARTESIAN_POINT('',(7.595854790934E-02,0.904451877164,+ 1.558931852983));+#9998 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.558931852983));+#9999 = ORIENTED_EDGE('',*,*,#10000,.F.);+#10000 = EDGE_CURVE('',#10001,#9993,#10003,.T.);+#10001 = VERTEX_POINT('',#10002);+#10002 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.552977284328));+#10003 = LINE('',#10004,#10005);+#10004 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.552977284328));+#10005 = VECTOR('',#10006,1.);+#10006 = DIRECTION('',(0.,0.,1.));+#10007 = ORIENTED_EDGE('',*,*,#10008,.F.);+#10008 = EDGE_CURVE('',#9968,#10001,#10009,.T.);+#10009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10010,#10011,#10012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10010 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.552977284328));+#10011 = CARTESIAN_POINT('',(7.595854790934E-02,0.904451877164,+ 1.552977284328));+#10012 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.552977284328));+#10013 = SURFACE_OF_LINEAR_EXTRUSION('',#10014,#10018);+#10014 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10015,#10016,#10017),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10015 = CARTESIAN_POINT('',(7.595854790934E-02,0.887006851806,+ 1.552977284328));+#10016 = CARTESIAN_POINT('',(7.595854790934E-02,0.904451877164,+ 1.552977284328));+#10017 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.552977284328));+#10018 = VECTOR('',#10019,1.);+#10019 = DIRECTION('',(-0.,-0.,-1.));+#10020 = ADVANCED_FACE('',(#10021),#10046,.T.);+#10021 = FACE_BOUND('',#10022,.T.);+#10022 = EDGE_LOOP('',(#10023,#10024,#10032,#10040));+#10023 = ORIENTED_EDGE('',*,*,#10000,.T.);+#10024 = ORIENTED_EDGE('',*,*,#10025,.T.);+#10025 = EDGE_CURVE('',#9993,#10026,#10028,.T.);+#10026 = VERTEX_POINT('',#10027);+#10027 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.558931852983));+#10028 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10029,#10030,#10031),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10029 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.558931852983));+#10030 = CARTESIAN_POINT('',(5.982189945396E-02,0.924804406747,+ 1.558931852983));+#10031 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.558931852983));+#10032 = ORIENTED_EDGE('',*,*,#10033,.F.);+#10033 = EDGE_CURVE('',#10034,#10026,#10036,.T.);+#10034 = VERTEX_POINT('',#10035);+#10035 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.552977284328));+#10036 = LINE('',#10037,#10038);+#10037 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.552977284328));+#10038 = VECTOR('',#10039,1.);+#10039 = DIRECTION('',(0.,0.,1.));+#10040 = ORIENTED_EDGE('',*,*,#10041,.F.);+#10041 = EDGE_CURVE('',#10001,#10034,#10042,.T.);+#10042 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10043,#10044,#10045),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10043 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.552977284328));+#10044 = CARTESIAN_POINT('',(5.982189945396E-02,0.924804406747,+ 1.552977284328));+#10045 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.552977284328));+#10046 = SURFACE_OF_LINEAR_EXTRUSION('',#10047,#10051);+#10047 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10048,#10049,#10050),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10048 = CARTESIAN_POINT('',(6.789022368165E-02,0.914628141955,+ 1.552977284328));+#10049 = CARTESIAN_POINT('',(5.982189945396E-02,0.924804406747,+ 1.552977284328));+#10050 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.552977284328));+#10051 = VECTOR('',#10052,1.);+#10052 = DIRECTION('',(-0.,-0.,-1.));+#10053 = ADVANCED_FACE('',(#10054),#10079,.T.);+#10054 = FACE_BOUND('',#10055,.T.);+#10055 = EDGE_LOOP('',(#10056,#10057,#10065,#10073));+#10056 = ORIENTED_EDGE('',*,*,#10033,.T.);+#10057 = ORIENTED_EDGE('',*,*,#10058,.T.);+#10058 = EDGE_CURVE('',#10026,#10059,#10061,.T.);+#10059 = VERTEX_POINT('',#10060);+#10060 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.558931852983));+#10061 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10062,#10063,#10064),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10062 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.558931852983));+#10063 = CARTESIAN_POINT('',(2.943848029022E-02,0.924804406747,+ 1.558931852983));+#10064 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.558931852983));+#10065 = ORIENTED_EDGE('',*,*,#10066,.F.);+#10066 = EDGE_CURVE('',#10067,#10059,#10069,.T.);+#10067 = VERTEX_POINT('',#10068);+#10068 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.552977284328));+#10069 = LINE('',#10070,#10071);+#10070 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.552977284328));+#10071 = VECTOR('',#10072,1.);+#10072 = DIRECTION('',(0.,0.,1.));+#10073 = ORIENTED_EDGE('',*,*,#10074,.F.);+#10074 = EDGE_CURVE('',#10034,#10067,#10075,.T.);+#10075 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10076,#10077,#10078),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10076 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.552977284328));+#10077 = CARTESIAN_POINT('',(2.943848029022E-02,0.924804406747,+ 1.552977284328));+#10078 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.552977284328));+#10079 = SURFACE_OF_LINEAR_EXTRUSION('',#10080,#10084);+#10080 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10081,#10082,#10083),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10081 = CARTESIAN_POINT('',(4.615662959084E-02,0.924804406747,+ 1.552977284328));+#10082 = CARTESIAN_POINT('',(2.943848029022E-02,0.924804406747,+ 1.552977284328));+#10083 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.552977284328));+#10084 = VECTOR('',#10085,1.);+#10085 = DIRECTION('',(-0.,-0.,-1.));+#10086 = ADVANCED_FACE('',(#10087),#10103,.T.);+#10087 = FACE_BOUND('',#10088,.T.);+#10088 = EDGE_LOOP('',(#10089,#10090,#10096,#10097));+#10089 = ORIENTED_EDGE('',*,*,#10066,.T.);+#10090 = ORIENTED_EDGE('',*,*,#10091,.T.);+#10091 = EDGE_CURVE('',#10059,#9170,#10092,.T.);+#10092 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10093,#10094,#10095),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10093 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.558931852983));+#10094 = CARTESIAN_POINT('',(1.12665788765E-02,0.904451877164,+ 1.558931852983));+#10095 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.558931852983));+#10096 = ORIENTED_EDGE('',*,*,#9167,.F.);+#10097 = ORIENTED_EDGE('',*,*,#10098,.F.);+#10098 = EDGE_CURVE('',#10067,#9168,#10099,.T.);+#10099 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10100,#10101,#10102),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10100 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.552977284328));+#10101 = CARTESIAN_POINT('',(1.12665788765E-02,0.904451877164,+ 1.552977284328));+#10102 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.552977284328));+#10103 = SURFACE_OF_LINEAR_EXTRUSION('',#10104,#10108);+#10104 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10105,#10106,#10107),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10105 = CARTESIAN_POINT('',(2.035252958336E-02,0.914628141955,+ 1.552977284328));+#10106 = CARTESIAN_POINT('',(1.12665788765E-02,0.904451877164,+ 1.552977284328));+#10107 = CARTESIAN_POINT('',(1.12665788765E-02,0.885843850116,+ 1.552977284328));+#10108 = VECTOR('',#10109,1.);+#10109 = DIRECTION('',(-0.,-0.,-1.));+#10110 = ADVANCED_FACE('',(#10111),#10142,.F.);+#10111 = FACE_BOUND('',#10112,.T.);+#10112 = EDGE_LOOP('',(#10113,#10114,#10115,#10116,#10117,#10118,#10119,+ #10120,#10121,#10122,#10123,#10124,#10125,#10126,#10127,#10128,+ #10129,#10130,#10131,#10132,#10133,#10134,#10135,#10136,#10137,+ #10138,#10139,#10140,#10141));+#10113 = ORIENTED_EDGE('',*,*,#9193,.T.);+#10114 = ORIENTED_EDGE('',*,*,#9224,.T.);+#10115 = ORIENTED_EDGE('',*,*,#9255,.T.);+#10116 = ORIENTED_EDGE('',*,*,#9286,.T.);+#10117 = ORIENTED_EDGE('',*,*,#9319,.T.);+#10118 = ORIENTED_EDGE('',*,*,#9352,.T.);+#10119 = ORIENTED_EDGE('',*,*,#9385,.T.);+#10120 = ORIENTED_EDGE('',*,*,#9418,.T.);+#10121 = ORIENTED_EDGE('',*,*,#9451,.T.);+#10122 = ORIENTED_EDGE('',*,*,#9484,.T.);+#10123 = ORIENTED_EDGE('',*,*,#9515,.T.);+#10124 = ORIENTED_EDGE('',*,*,#9548,.T.);+#10125 = ORIENTED_EDGE('',*,*,#9581,.T.);+#10126 = ORIENTED_EDGE('',*,*,#9614,.T.);+#10127 = ORIENTED_EDGE('',*,*,#9647,.T.);+#10128 = ORIENTED_EDGE('',*,*,#9680,.T.);+#10129 = ORIENTED_EDGE('',*,*,#9713,.T.);+#10130 = ORIENTED_EDGE('',*,*,#9746,.T.);+#10131 = ORIENTED_EDGE('',*,*,#9779,.T.);+#10132 = ORIENTED_EDGE('',*,*,#9812,.T.);+#10133 = ORIENTED_EDGE('',*,*,#9845,.T.);+#10134 = ORIENTED_EDGE('',*,*,#9878,.T.);+#10135 = ORIENTED_EDGE('',*,*,#9911,.T.);+#10136 = ORIENTED_EDGE('',*,*,#9942,.T.);+#10137 = ORIENTED_EDGE('',*,*,#9975,.T.);+#10138 = ORIENTED_EDGE('',*,*,#10008,.T.);+#10139 = ORIENTED_EDGE('',*,*,#10041,.T.);+#10140 = ORIENTED_EDGE('',*,*,#10074,.T.);+#10141 = ORIENTED_EDGE('',*,*,#10098,.T.);+#10142 = PLANE('',#10143);+#10143 = AXIS2_PLACEMENT_3D('',#10144,#10145,#10146);+#10144 = CARTESIAN_POINT('',(0.108377220031,0.806032859107,+ 1.552977284328));+#10145 = DIRECTION('',(0.,0.,1.));+#10146 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10147 = ADVANCED_FACE('',(#10148),#10179,.T.);+#10148 = FACE_BOUND('',#10149,.F.);+#10149 = EDGE_LOOP('',(#10150,#10151,#10152,#10153,#10154,#10155,#10156,+ #10157,#10158,#10159,#10160,#10161,#10162,#10163,#10164,#10165,+ #10166,#10167,#10168,#10169,#10170,#10171,#10172,#10173,#10174,+ #10175,#10176,#10177,#10178));+#10150 = ORIENTED_EDGE('',*,*,#9177,.T.);+#10151 = ORIENTED_EDGE('',*,*,#9208,.T.);+#10152 = ORIENTED_EDGE('',*,*,#9239,.T.);+#10153 = ORIENTED_EDGE('',*,*,#9270,.T.);+#10154 = ORIENTED_EDGE('',*,*,#9303,.T.);+#10155 = ORIENTED_EDGE('',*,*,#9336,.T.);+#10156 = ORIENTED_EDGE('',*,*,#9369,.T.);+#10157 = ORIENTED_EDGE('',*,*,#9402,.T.);+#10158 = ORIENTED_EDGE('',*,*,#9435,.T.);+#10159 = ORIENTED_EDGE('',*,*,#9468,.T.);+#10160 = ORIENTED_EDGE('',*,*,#9499,.T.);+#10161 = ORIENTED_EDGE('',*,*,#9532,.T.);+#10162 = ORIENTED_EDGE('',*,*,#9565,.T.);+#10163 = ORIENTED_EDGE('',*,*,#9598,.T.);+#10164 = ORIENTED_EDGE('',*,*,#9631,.T.);+#10165 = ORIENTED_EDGE('',*,*,#9664,.T.);+#10166 = ORIENTED_EDGE('',*,*,#9697,.T.);+#10167 = ORIENTED_EDGE('',*,*,#9730,.T.);+#10168 = ORIENTED_EDGE('',*,*,#9763,.T.);+#10169 = ORIENTED_EDGE('',*,*,#9796,.T.);+#10170 = ORIENTED_EDGE('',*,*,#9829,.T.);+#10171 = ORIENTED_EDGE('',*,*,#9862,.T.);+#10172 = ORIENTED_EDGE('',*,*,#9895,.T.);+#10173 = ORIENTED_EDGE('',*,*,#9926,.T.);+#10174 = ORIENTED_EDGE('',*,*,#9959,.T.);+#10175 = ORIENTED_EDGE('',*,*,#9992,.T.);+#10176 = ORIENTED_EDGE('',*,*,#10025,.T.);+#10177 = ORIENTED_EDGE('',*,*,#10058,.T.);+#10178 = ORIENTED_EDGE('',*,*,#10091,.T.);+#10179 = PLANE('',#10180);+#10180 = AXIS2_PLACEMENT_3D('',#10181,#10182,#10183);+#10181 = CARTESIAN_POINT('',(0.108377220031,0.806032859107,+ 1.558931852983));+#10182 = DIRECTION('',(0.,0.,1.));+#10183 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10184 = MANIFOLD_SOLID_BREP('',#10185);+#10185 = CLOSED_SHELL('',(#10186,#10226,#10257,#10288,#10319,#10350,+ #10381,#10412,#10443,#10474,#10496,#10514));+#10186 = ADVANCED_FACE('',(#10187),#10221,.T.);+#10187 = FACE_BOUND('',#10188,.T.);+#10188 = EDGE_LOOP('',(#10189,#10199,#10207,#10215));+#10189 = ORIENTED_EDGE('',*,*,#10190,.T.);+#10190 = EDGE_CURVE('',#10191,#10193,#10195,.T.);+#10191 = VERTEX_POINT('',#10192);+#10192 = CARTESIAN_POINT('',(-0.108667970454,1.146937729628,+ 1.552977284328));+#10193 = VERTEX_POINT('',#10194);+#10194 = CARTESIAN_POINT('',(-0.108667970454,1.146937729628,+ 1.558931852983));+#10195 = LINE('',#10196,#10197);+#10196 = CARTESIAN_POINT('',(-0.108667970454,1.146937729628,+ 1.552977284328));+#10197 = VECTOR('',#10198,1.);+#10198 = DIRECTION('',(0.,0.,1.));+#10199 = ORIENTED_EDGE('',*,*,#10200,.T.);+#10200 = EDGE_CURVE('',#10193,#10201,#10203,.T.);+#10201 = VERTEX_POINT('',#10202);+#10202 = CARTESIAN_POINT('',(-7.087041551349E-02,1.146937729628,+ 1.558931852983));+#10203 = LINE('',#10204,#10205);+#10204 = CARTESIAN_POINT('',(-0.108667970454,1.146937729628,+ 1.558931852983));+#10205 = VECTOR('',#10206,1.);+#10206 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10207 = ORIENTED_EDGE('',*,*,#10208,.F.);+#10208 = EDGE_CURVE('',#10209,#10201,#10211,.T.);+#10209 = VERTEX_POINT('',#10210);+#10210 = CARTESIAN_POINT('',(-7.087041551349E-02,1.146937729628,+ 1.552977284328));+#10211 = LINE('',#10212,#10213);+#10212 = CARTESIAN_POINT('',(-7.087041551349E-02,1.146937729628,+ 1.552977284328));+#10213 = VECTOR('',#10214,1.);+#10214 = DIRECTION('',(0.,0.,1.));+#10215 = ORIENTED_EDGE('',*,*,#10216,.F.);+#10216 = EDGE_CURVE('',#10191,#10209,#10217,.T.);+#10217 = LINE('',#10218,#10219);+#10218 = CARTESIAN_POINT('',(-0.108667970454,1.146937729628,+ 1.552977284328));+#10219 = VECTOR('',#10220,1.);+#10220 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10221 = PLANE('',#10222);+#10222 = AXIS2_PLACEMENT_3D('',#10223,#10224,#10225);+#10223 = CARTESIAN_POINT('',(-0.108667970454,1.146937729628,+ 1.552977284328));+#10224 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#10225 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10226 = ADVANCED_FACE('',(#10227),#10252,.T.);+#10227 = FACE_BOUND('',#10228,.T.);+#10228 = EDGE_LOOP('',(#10229,#10230,#10238,#10246));+#10229 = ORIENTED_EDGE('',*,*,#10208,.T.);+#10230 = ORIENTED_EDGE('',*,*,#10231,.T.);+#10231 = EDGE_CURVE('',#10201,#10232,#10234,.T.);+#10232 = VERTEX_POINT('',#10233);+#10233 = CARTESIAN_POINT('',(-7.087041551349E-02,1.054624470446,+ 1.558931852983));+#10234 = LINE('',#10235,#10236);+#10235 = CARTESIAN_POINT('',(-7.087041551349E-02,1.146937729628,+ 1.558931852983));+#10236 = VECTOR('',#10237,1.);+#10237 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10238 = ORIENTED_EDGE('',*,*,#10239,.F.);+#10239 = EDGE_CURVE('',#10240,#10232,#10242,.T.);+#10240 = VERTEX_POINT('',#10241);+#10241 = CARTESIAN_POINT('',(-7.087041551349E-02,1.054624470446,+ 1.552977284328));+#10242 = LINE('',#10243,#10244);+#10243 = CARTESIAN_POINT('',(-7.087041551349E-02,1.054624470446,+ 1.552977284328));+#10244 = VECTOR('',#10245,1.);+#10245 = DIRECTION('',(0.,0.,1.));+#10246 = ORIENTED_EDGE('',*,*,#10247,.F.);+#10247 = EDGE_CURVE('',#10209,#10240,#10248,.T.);+#10248 = LINE('',#10249,#10250);+#10249 = CARTESIAN_POINT('',(-7.087041551349E-02,1.146937729628,+ 1.552977284328));+#10250 = VECTOR('',#10251,1.);+#10251 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10252 = PLANE('',#10253);+#10253 = AXIS2_PLACEMENT_3D('',#10254,#10255,#10256);+#10254 = CARTESIAN_POINT('',(-7.087041551349E-02,1.146937729628,+ 1.552977284328));+#10255 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10256 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10257 = ADVANCED_FACE('',(#10258),#10283,.T.);+#10258 = FACE_BOUND('',#10259,.T.);+#10259 = EDGE_LOOP('',(#10260,#10261,#10269,#10277));+#10260 = ORIENTED_EDGE('',*,*,#10239,.T.);+#10261 = ORIENTED_EDGE('',*,*,#10262,.T.);+#10262 = EDGE_CURVE('',#10232,#10263,#10265,.T.);+#10263 = VERTEX_POINT('',#10264);+#10264 = CARTESIAN_POINT('',(-2.405959747176E-02,1.054624470446,+ 1.558931852983));+#10265 = LINE('',#10266,#10267);+#10266 = CARTESIAN_POINT('',(-7.087041551349E-02,1.054624470446,+ 1.558931852983));+#10267 = VECTOR('',#10268,1.);+#10268 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10269 = ORIENTED_EDGE('',*,*,#10270,.F.);+#10270 = EDGE_CURVE('',#10271,#10263,#10273,.T.);+#10271 = VERTEX_POINT('',#10272);+#10272 = CARTESIAN_POINT('',(-2.405959747176E-02,1.054624470446,+ 1.552977284328));+#10273 = LINE('',#10274,#10275);+#10274 = CARTESIAN_POINT('',(-2.405959747176E-02,1.054624470446,+ 1.552977284328));+#10275 = VECTOR('',#10276,1.);+#10276 = DIRECTION('',(0.,0.,1.));+#10277 = ORIENTED_EDGE('',*,*,#10278,.F.);+#10278 = EDGE_CURVE('',#10240,#10271,#10279,.T.);+#10279 = LINE('',#10280,#10281);+#10280 = CARTESIAN_POINT('',(-7.087041551349E-02,1.054624470446,+ 1.552977284328));+#10281 = VECTOR('',#10282,1.);+#10282 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10283 = PLANE('',#10284);+#10284 = AXIS2_PLACEMENT_3D('',#10285,#10286,#10287);+#10285 = CARTESIAN_POINT('',(-7.087041551349E-02,1.054624470446,+ 1.552977284328));+#10286 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#10287 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10288 = ADVANCED_FACE('',(#10289),#10314,.T.);+#10289 = FACE_BOUND('',#10290,.T.);+#10290 = EDGE_LOOP('',(#10291,#10292,#10300,#10308));+#10291 = ORIENTED_EDGE('',*,*,#10270,.T.);+#10292 = ORIENTED_EDGE('',*,*,#10293,.T.);+#10293 = EDGE_CURVE('',#10263,#10294,#10296,.T.);+#10294 = VERTEX_POINT('',#10295);+#10295 = CARTESIAN_POINT('',(-2.405959747176E-02,1.138651342583,+ 1.558931852983));+#10296 = LINE('',#10297,#10298);+#10297 = CARTESIAN_POINT('',(-2.405959747176E-02,1.054624470446,+ 1.558931852983));+#10298 = VECTOR('',#10299,1.);+#10299 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10300 = ORIENTED_EDGE('',*,*,#10301,.F.);+#10301 = EDGE_CURVE('',#10302,#10294,#10304,.T.);+#10302 = VERTEX_POINT('',#10303);+#10303 = CARTESIAN_POINT('',(-2.405959747176E-02,1.138651342583,+ 1.552977284328));+#10304 = LINE('',#10305,#10306);+#10305 = CARTESIAN_POINT('',(-2.405959747176E-02,1.138651342583,+ 1.552977284328));+#10306 = VECTOR('',#10307,1.);+#10307 = DIRECTION('',(0.,0.,1.));+#10308 = ORIENTED_EDGE('',*,*,#10309,.F.);+#10309 = EDGE_CURVE('',#10271,#10302,#10310,.T.);+#10310 = LINE('',#10311,#10312);+#10311 = CARTESIAN_POINT('',(-2.405959747176E-02,1.054624470446,+ 1.552977284328));+#10312 = VECTOR('',#10313,1.);+#10313 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10314 = PLANE('',#10315);+#10315 = AXIS2_PLACEMENT_3D('',#10316,#10317,#10318);+#10316 = CARTESIAN_POINT('',(-2.405959747176E-02,1.054624470446,+ 1.552977284328));+#10317 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#10318 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10319 = ADVANCED_FACE('',(#10320),#10345,.T.);+#10320 = FACE_BOUND('',#10321,.T.);+#10321 = EDGE_LOOP('',(#10322,#10323,#10331,#10339));+#10322 = ORIENTED_EDGE('',*,*,#10301,.T.);+#10323 = ORIENTED_EDGE('',*,*,#10324,.T.);+#10324 = EDGE_CURVE('',#10294,#10325,#10327,.T.);+#10325 = VERTEX_POINT('',#10326);+#10326 = CARTESIAN_POINT('',(1.373795746877E-02,1.138651342583,+ 1.558931852983));+#10327 = LINE('',#10328,#10329);+#10328 = CARTESIAN_POINT('',(-2.405959747176E-02,1.138651342583,+ 1.558931852983));+#10329 = VECTOR('',#10330,1.);+#10330 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10331 = ORIENTED_EDGE('',*,*,#10332,.F.);+#10332 = EDGE_CURVE('',#10333,#10325,#10335,.T.);+#10333 = VERTEX_POINT('',#10334);+#10334 = CARTESIAN_POINT('',(1.373795746877E-02,1.138651342583,+ 1.552977284328));+#10335 = LINE('',#10336,#10337);+#10336 = CARTESIAN_POINT('',(1.373795746877E-02,1.138651342583,+ 1.552977284328));+#10337 = VECTOR('',#10338,1.);+#10338 = DIRECTION('',(0.,0.,1.));+#10339 = ORIENTED_EDGE('',*,*,#10340,.F.);+#10340 = EDGE_CURVE('',#10302,#10333,#10341,.T.);+#10341 = LINE('',#10342,#10343);+#10342 = CARTESIAN_POINT('',(-2.405959747176E-02,1.138651342583,+ 1.552977284328));+#10343 = VECTOR('',#10344,1.);+#10344 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10345 = PLANE('',#10346);+#10346 = AXIS2_PLACEMENT_3D('',#10347,#10348,#10349);+#10347 = CARTESIAN_POINT('',(-2.405959747176E-02,1.138651342583,+ 1.552977284328));+#10348 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#10349 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10350 = ADVANCED_FACE('',(#10351),#10376,.T.);+#10351 = FACE_BOUND('',#10352,.T.);+#10352 = EDGE_LOOP('',(#10353,#10354,#10362,#10370));+#10353 = ORIENTED_EDGE('',*,*,#10332,.T.);+#10354 = ORIENTED_EDGE('',*,*,#10355,.T.);+#10355 = EDGE_CURVE('',#10325,#10356,#10358,.T.);+#10356 = VERTEX_POINT('',#10357);+#10357 = CARTESIAN_POINT('',(1.373795746877E-02,1.054624470446,+ 1.558931852983));+#10358 = LINE('',#10359,#10360);+#10359 = CARTESIAN_POINT('',(1.373795746877E-02,1.138651342583,+ 1.558931852983));+#10360 = VECTOR('',#10361,1.);+#10361 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10362 = ORIENTED_EDGE('',*,*,#10363,.F.);+#10363 = EDGE_CURVE('',#10364,#10356,#10366,.T.);+#10364 = VERTEX_POINT('',#10365);+#10365 = CARTESIAN_POINT('',(1.373795746877E-02,1.054624470446,+ 1.552977284328));+#10366 = LINE('',#10367,#10368);+#10367 = CARTESIAN_POINT('',(1.373795746877E-02,1.054624470446,+ 1.552977284328));+#10368 = VECTOR('',#10369,1.);+#10369 = DIRECTION('',(0.,0.,1.));+#10370 = ORIENTED_EDGE('',*,*,#10371,.F.);+#10371 = EDGE_CURVE('',#10333,#10364,#10372,.T.);+#10372 = LINE('',#10373,#10374);+#10373 = CARTESIAN_POINT('',(1.373795746877E-02,1.138651342583,+ 1.552977284328));+#10374 = VECTOR('',#10375,1.);+#10375 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10376 = PLANE('',#10377);+#10377 = AXIS2_PLACEMENT_3D('',#10378,#10379,#10380);+#10378 = CARTESIAN_POINT('',(1.373795746877E-02,1.138651342583,+ 1.552977284328));+#10379 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10380 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10381 = ADVANCED_FACE('',(#10382),#10407,.T.);+#10382 = FACE_BOUND('',#10383,.T.);+#10383 = EDGE_LOOP('',(#10384,#10385,#10393,#10401));+#10384 = ORIENTED_EDGE('',*,*,#10363,.T.);+#10385 = ORIENTED_EDGE('',*,*,#10386,.T.);+#10386 = EDGE_CURVE('',#10356,#10387,#10389,.T.);+#10387 = VERTEX_POINT('',#10388);+#10388 = CARTESIAN_POINT('',(0.108377220031,1.054624470446,+ 1.558931852983));+#10389 = LINE('',#10390,#10391);+#10390 = CARTESIAN_POINT('',(1.373795746877E-02,1.054624470446,+ 1.558931852983));+#10391 = VECTOR('',#10392,1.);+#10392 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10393 = ORIENTED_EDGE('',*,*,#10394,.F.);+#10394 = EDGE_CURVE('',#10395,#10387,#10397,.T.);+#10395 = VERTEX_POINT('',#10396);+#10396 = CARTESIAN_POINT('',(0.108377220031,1.054624470446,+ 1.552977284328));+#10397 = LINE('',#10398,#10399);+#10398 = CARTESIAN_POINT('',(0.108377220031,1.054624470446,+ 1.552977284328));+#10399 = VECTOR('',#10400,1.);+#10400 = DIRECTION('',(0.,0.,1.));+#10401 = ORIENTED_EDGE('',*,*,#10402,.F.);+#10402 = EDGE_CURVE('',#10364,#10395,#10403,.T.);+#10403 = LINE('',#10404,#10405);+#10404 = CARTESIAN_POINT('',(1.373795746877E-02,1.054624470446,+ 1.552977284328));+#10405 = VECTOR('',#10406,1.);+#10406 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10407 = PLANE('',#10408);+#10408 = AXIS2_PLACEMENT_3D('',#10409,#10410,#10411);+#10409 = CARTESIAN_POINT('',(1.373795746877E-02,1.054624470446,+ 1.552977284328));+#10410 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#10411 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10412 = ADVANCED_FACE('',(#10413),#10438,.T.);+#10413 = FACE_BOUND('',#10414,.T.);+#10414 = EDGE_LOOP('',(#10415,#10416,#10424,#10432));+#10415 = ORIENTED_EDGE('',*,*,#10394,.T.);+#10416 = ORIENTED_EDGE('',*,*,#10417,.T.);+#10417 = EDGE_CURVE('',#10387,#10418,#10420,.T.);+#10418 = VERTEX_POINT('',#10419);+#10419 = CARTESIAN_POINT('',(0.108377220031,1.01173878311,1.558931852983+ ));+#10420 = LINE('',#10421,#10422);+#10421 = CARTESIAN_POINT('',(0.108377220031,1.054624470446,+ 1.558931852983));+#10422 = VECTOR('',#10423,1.);+#10423 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10424 = ORIENTED_EDGE('',*,*,#10425,.F.);+#10425 = EDGE_CURVE('',#10426,#10418,#10428,.T.);+#10426 = VERTEX_POINT('',#10427);+#10427 = CARTESIAN_POINT('',(0.108377220031,1.01173878311,1.552977284328+ ));+#10428 = LINE('',#10429,#10430);+#10429 = CARTESIAN_POINT('',(0.108377220031,1.01173878311,1.552977284328+ ));+#10430 = VECTOR('',#10431,1.);+#10431 = DIRECTION('',(0.,0.,1.));+#10432 = ORIENTED_EDGE('',*,*,#10433,.F.);+#10433 = EDGE_CURVE('',#10395,#10426,#10434,.T.);+#10434 = LINE('',#10435,#10436);+#10435 = CARTESIAN_POINT('',(0.108377220031,1.054624470446,+ 1.552977284328));+#10436 = VECTOR('',#10437,1.);+#10437 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10438 = PLANE('',#10439);+#10439 = AXIS2_PLACEMENT_3D('',#10440,#10441,#10442);+#10440 = CARTESIAN_POINT('',(0.108377220031,1.054624470446,+ 1.552977284328));+#10441 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#10442 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10443 = ADVANCED_FACE('',(#10444),#10469,.T.);+#10444 = FACE_BOUND('',#10445,.T.);+#10445 = EDGE_LOOP('',(#10446,#10447,#10455,#10463));+#10446 = ORIENTED_EDGE('',*,*,#10425,.T.);+#10447 = ORIENTED_EDGE('',*,*,#10448,.T.);+#10448 = EDGE_CURVE('',#10418,#10449,#10451,.T.);+#10449 = VERTEX_POINT('',#10450);+#10450 = CARTESIAN_POINT('',(-0.108667970454,1.01173878311,+ 1.558931852983));+#10451 = LINE('',#10452,#10453);+#10452 = CARTESIAN_POINT('',(0.108377220031,1.01173878311,1.558931852983+ ));+#10453 = VECTOR('',#10454,1.);+#10454 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#10455 = ORIENTED_EDGE('',*,*,#10456,.F.);+#10456 = EDGE_CURVE('',#10457,#10449,#10459,.T.);+#10457 = VERTEX_POINT('',#10458);+#10458 = CARTESIAN_POINT('',(-0.108667970454,1.01173878311,+ 1.552977284328));+#10459 = LINE('',#10460,#10461);+#10460 = CARTESIAN_POINT('',(-0.108667970454,1.01173878311,+ 1.552977284328));+#10461 = VECTOR('',#10462,1.);+#10462 = DIRECTION('',(0.,0.,1.));+#10463 = ORIENTED_EDGE('',*,*,#10464,.F.);+#10464 = EDGE_CURVE('',#10426,#10457,#10465,.T.);+#10465 = LINE('',#10466,#10467);+#10466 = CARTESIAN_POINT('',(0.108377220031,1.01173878311,1.552977284328+ ));+#10467 = VECTOR('',#10468,1.);+#10468 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#10469 = PLANE('',#10470);+#10470 = AXIS2_PLACEMENT_3D('',#10471,#10472,#10473);+#10471 = CARTESIAN_POINT('',(0.108377220031,1.01173878311,1.552977284328+ ));+#10472 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#10473 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#10474 = ADVANCED_FACE('',(#10475),#10491,.T.);+#10475 = FACE_BOUND('',#10476,.T.);+#10476 = EDGE_LOOP('',(#10477,#10478,#10484,#10485));+#10477 = ORIENTED_EDGE('',*,*,#10456,.T.);+#10478 = ORIENTED_EDGE('',*,*,#10479,.T.);+#10479 = EDGE_CURVE('',#10449,#10193,#10480,.T.);+#10480 = LINE('',#10481,#10482);+#10481 = CARTESIAN_POINT('',(-0.108667970454,1.01173878311,+ 1.558931852983));+#10482 = VECTOR('',#10483,1.);+#10483 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10484 = ORIENTED_EDGE('',*,*,#10190,.F.);+#10485 = ORIENTED_EDGE('',*,*,#10486,.F.);+#10486 = EDGE_CURVE('',#10457,#10191,#10487,.T.);+#10487 = LINE('',#10488,#10489);+#10488 = CARTESIAN_POINT('',(-0.108667970454,1.01173878311,+ 1.552977284328));+#10489 = VECTOR('',#10490,1.);+#10490 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10491 = PLANE('',#10492);+#10492 = AXIS2_PLACEMENT_3D('',#10493,#10494,#10495);+#10493 = CARTESIAN_POINT('',(-0.108667970454,1.01173878311,+ 1.552977284328));+#10494 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#10495 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10496 = ADVANCED_FACE('',(#10497),#10509,.F.);+#10497 = FACE_BOUND('',#10498,.T.);+#10498 = EDGE_LOOP('',(#10499,#10500,#10501,#10502,#10503,#10504,#10505,+ #10506,#10507,#10508));+#10499 = ORIENTED_EDGE('',*,*,#10216,.T.);+#10500 = ORIENTED_EDGE('',*,*,#10247,.T.);+#10501 = ORIENTED_EDGE('',*,*,#10278,.T.);+#10502 = ORIENTED_EDGE('',*,*,#10309,.T.);+#10503 = ORIENTED_EDGE('',*,*,#10340,.T.);+#10504 = ORIENTED_EDGE('',*,*,#10371,.T.);+#10505 = ORIENTED_EDGE('',*,*,#10402,.T.);+#10506 = ORIENTED_EDGE('',*,*,#10433,.T.);+#10507 = ORIENTED_EDGE('',*,*,#10464,.T.);+#10508 = ORIENTED_EDGE('',*,*,#10486,.T.);+#10509 = PLANE('',#10510);+#10510 = AXIS2_PLACEMENT_3D('',#10511,#10512,#10513);+#10511 = CARTESIAN_POINT('',(0.108377220031,0.985280494652,+ 1.552977284328));+#10512 = DIRECTION('',(0.,0.,1.));+#10513 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10514 = ADVANCED_FACE('',(#10515),#10527,.T.);+#10515 = FACE_BOUND('',#10516,.F.);+#10516 = EDGE_LOOP('',(#10517,#10518,#10519,#10520,#10521,#10522,#10523,+ #10524,#10525,#10526));+#10517 = ORIENTED_EDGE('',*,*,#10200,.T.);+#10518 = ORIENTED_EDGE('',*,*,#10231,.T.);+#10519 = ORIENTED_EDGE('',*,*,#10262,.T.);+#10520 = ORIENTED_EDGE('',*,*,#10293,.T.);+#10521 = ORIENTED_EDGE('',*,*,#10324,.T.);+#10522 = ORIENTED_EDGE('',*,*,#10355,.T.);+#10523 = ORIENTED_EDGE('',*,*,#10386,.T.);+#10524 = ORIENTED_EDGE('',*,*,#10417,.T.);+#10525 = ORIENTED_EDGE('',*,*,#10448,.T.);+#10526 = ORIENTED_EDGE('',*,*,#10479,.T.);+#10527 = PLANE('',#10528);+#10528 = AXIS2_PLACEMENT_3D('',#10529,#10530,#10531);+#10529 = CARTESIAN_POINT('',(0.108377220031,0.985280494652,+ 1.558931852983));+#10530 = DIRECTION('',(0.,0.,1.));+#10531 = DIRECTION('',(1.110223024625E-16,1.,0.));+#10532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#10536)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#10533,#10534,#10535)) +REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#10533 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#10534 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#10535 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#10536 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#10533,+ 'distance_accuracy_value','confusion accuracy');+#10537 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10538,#10540);+#10538 = ( REPRESENTATION_RELATIONSHIP('','',#3124,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10539) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#10539 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19);+#10540 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+ #10541);+#10541 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('10775','=>[0:1:1:2]','',#5,+ #3119,$);+#10542 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#3121));+#10543 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+ #10544,#10554,#10563,#10572,#10581,#10590,#10599,#10608,#10617,+ #10626,#10635,#10644,#10653,#10662,#10671,#10681,#10690,#10699,+ #10708,#10717,#10726,#10735,#10744,#10753,#10762,#10771,#10780,+ #10789,#10798,#10807,#10816,#10825,#10834,#10843,#10852,#10861,+ #10870,#10879,#10888,#10897,#10906,#10915,#10924,#10933,#10942,+ #10951,#10960,#10969,#10978,#10987,#10996,#11005,#11014,#11023,+ #11032,#11041,#11050,#11059,#11068,#11077,#11086,#11095,#11104,+ #11113,#11122,#11131,#11140,#11149,#11158,#11167,#11176,#11185,+ #11194,#11203,#11212,#11221,#11230,#11239,#11248,#11257,#11266,+ #11275,#11284,#11293,#11302,#11311,#11320,#11329,#11338,#11347,+ #11356,#11365,#11374,#11383,#11392,#11401,#11410,#11419,#11428,+ #11437,#11446,#11455),#3106);+#10544 = STYLED_ITEM('color',(#10545),#39);+#10545 = PRESENTATION_STYLE_ASSIGNMENT((#10546,#10552));+#10546 = SURFACE_STYLE_USAGE(.BOTH.,#10547);+#10547 = SURFACE_SIDE_STYLE('',(#10548));+#10548 = SURFACE_STYLE_FILL_AREA(#10549);+#10549 = FILL_AREA_STYLE('',(#10550));+#10550 = FILL_AREA_STYLE_COLOUR('',#10551);+#10551 = COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#10552 = CURVE_STYLE('',#10553,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10553 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10554 = STYLED_ITEM('color',(#10555),#77);+#10555 = PRESENTATION_STYLE_ASSIGNMENT((#10556,#10561));+#10556 = SURFACE_STYLE_USAGE(.BOTH.,#10557);+#10557 = SURFACE_SIDE_STYLE('',(#10558));+#10558 = SURFACE_STYLE_FILL_AREA(#10559);+#10559 = FILL_AREA_STYLE('',(#10560));+#10560 = FILL_AREA_STYLE_COLOUR('',#10551);+#10561 = CURVE_STYLE('',#10562,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10562 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10563 = STYLED_ITEM('color',(#10564),#140);+#10564 = PRESENTATION_STYLE_ASSIGNMENT((#10565,#10570));+#10565 = SURFACE_STYLE_USAGE(.BOTH.,#10566);+#10566 = SURFACE_SIDE_STYLE('',(#10567));+#10567 = SURFACE_STYLE_FILL_AREA(#10568);+#10568 = FILL_AREA_STYLE('',(#10569));+#10569 = FILL_AREA_STYLE_COLOUR('',#10551);+#10570 = CURVE_STYLE('',#10571,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10571 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10572 = STYLED_ITEM('color',(#10573),#163);+#10573 = PRESENTATION_STYLE_ASSIGNMENT((#10574,#10579));+#10574 = SURFACE_STYLE_USAGE(.BOTH.,#10575);+#10575 = SURFACE_SIDE_STYLE('',(#10576));+#10576 = SURFACE_STYLE_FILL_AREA(#10577);+#10577 = FILL_AREA_STYLE('',(#10578));+#10578 = FILL_AREA_STYLE_COLOUR('',#10551);+#10579 = CURVE_STYLE('',#10580,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10580 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10581 = STYLED_ITEM('color',(#10582),#192);+#10582 = PRESENTATION_STYLE_ASSIGNMENT((#10583,#10588));+#10583 = SURFACE_STYLE_USAGE(.BOTH.,#10584);+#10584 = SURFACE_SIDE_STYLE('',(#10585));+#10585 = SURFACE_STYLE_FILL_AREA(#10586);+#10586 = FILL_AREA_STYLE('',(#10587));+#10587 = FILL_AREA_STYLE_COLOUR('',#10551);+#10588 = CURVE_STYLE('',#10589,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10589 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10590 = STYLED_ITEM('color',(#10591),#215);+#10591 = PRESENTATION_STYLE_ASSIGNMENT((#10592,#10597));+#10592 = SURFACE_STYLE_USAGE(.BOTH.,#10593);+#10593 = SURFACE_SIDE_STYLE('',(#10594));+#10594 = SURFACE_STYLE_FILL_AREA(#10595);+#10595 = FILL_AREA_STYLE('',(#10596));+#10596 = FILL_AREA_STYLE_COLOUR('',#10551);+#10597 = CURVE_STYLE('',#10598,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10598 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10599 = STYLED_ITEM('color',(#10600),#286);+#10600 = PRESENTATION_STYLE_ASSIGNMENT((#10601,#10606));+#10601 = SURFACE_STYLE_USAGE(.BOTH.,#10602);+#10602 = SURFACE_SIDE_STYLE('',(#10603));+#10603 = SURFACE_STYLE_FILL_AREA(#10604);+#10604 = FILL_AREA_STYLE('',(#10605));+#10605 = FILL_AREA_STYLE_COLOUR('',#10551);+#10606 = CURVE_STYLE('',#10607,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10607 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10608 = STYLED_ITEM('color',(#10609),#341);+#10609 = PRESENTATION_STYLE_ASSIGNMENT((#10610,#10615));+#10610 = SURFACE_STYLE_USAGE(.BOTH.,#10611);+#10611 = SURFACE_SIDE_STYLE('',(#10612));+#10612 = SURFACE_STYLE_FILL_AREA(#10613);+#10613 = FILL_AREA_STYLE('',(#10614));+#10614 = FILL_AREA_STYLE_COLOUR('',#10551);+#10615 = CURVE_STYLE('',#10616,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10617 = STYLED_ITEM('color',(#10618),#364);+#10618 = PRESENTATION_STYLE_ASSIGNMENT((#10619,#10624));+#10619 = SURFACE_STYLE_USAGE(.BOTH.,#10620);+#10620 = SURFACE_SIDE_STYLE('',(#10621));+#10621 = SURFACE_STYLE_FILL_AREA(#10622);+#10622 = FILL_AREA_STYLE('',(#10623));+#10623 = FILL_AREA_STYLE_COLOUR('',#10551);+#10624 = CURVE_STYLE('',#10625,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10626 = STYLED_ITEM('color',(#10627),#387);+#10627 = PRESENTATION_STYLE_ASSIGNMENT((#10628,#10633));+#10628 = SURFACE_STYLE_USAGE(.BOTH.,#10629);+#10629 = SURFACE_SIDE_STYLE('',(#10630));+#10630 = SURFACE_STYLE_FILL_AREA(#10631);+#10631 = FILL_AREA_STYLE('',(#10632));+#10632 = FILL_AREA_STYLE_COLOUR('',#10551);+#10633 = CURVE_STYLE('',#10634,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10634 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10635 = STYLED_ITEM('color',(#10636),#404);+#10636 = PRESENTATION_STYLE_ASSIGNMENT((#10637,#10642));+#10637 = SURFACE_STYLE_USAGE(.BOTH.,#10638);+#10638 = SURFACE_SIDE_STYLE('',(#10639));+#10639 = SURFACE_STYLE_FILL_AREA(#10640);+#10640 = FILL_AREA_STYLE('',(#10641));+#10641 = FILL_AREA_STYLE_COLOUR('',#10551);+#10642 = CURVE_STYLE('',#10643,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10644 = STYLED_ITEM('color',(#10645),#427);+#10645 = PRESENTATION_STYLE_ASSIGNMENT((#10646,#10651));+#10646 = SURFACE_STYLE_USAGE(.BOTH.,#10647);+#10647 = SURFACE_SIDE_STYLE('',(#10648));+#10648 = SURFACE_STYLE_FILL_AREA(#10649);+#10649 = FILL_AREA_STYLE('',(#10650));+#10650 = FILL_AREA_STYLE_COLOUR('',#10551);+#10651 = CURVE_STYLE('',#10652,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10652 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10653 = STYLED_ITEM('color',(#10654),#515);+#10654 = PRESENTATION_STYLE_ASSIGNMENT((#10655,#10660));+#10655 = SURFACE_STYLE_USAGE(.BOTH.,#10656);+#10656 = SURFACE_SIDE_STYLE('',(#10657));+#10657 = SURFACE_STYLE_FILL_AREA(#10658);+#10658 = FILL_AREA_STYLE('',(#10659));+#10659 = FILL_AREA_STYLE_COLOUR('',#10551);+#10660 = CURVE_STYLE('',#10661,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10661 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10662 = STYLED_ITEM('color',(#10663),#531);+#10663 = PRESENTATION_STYLE_ASSIGNMENT((#10664,#10669));+#10664 = SURFACE_STYLE_USAGE(.BOTH.,#10665);+#10665 = SURFACE_SIDE_STYLE('',(#10666));+#10666 = SURFACE_STYLE_FILL_AREA(#10667);+#10667 = FILL_AREA_STYLE('',(#10668));+#10668 = FILL_AREA_STYLE_COLOUR('',#10551);+#10669 = CURVE_STYLE('',#10670,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10671 = STYLED_ITEM('color',(#10672),#561);+#10672 = PRESENTATION_STYLE_ASSIGNMENT((#10673,#10679));+#10673 = SURFACE_STYLE_USAGE(.BOTH.,#10674);+#10674 = SURFACE_SIDE_STYLE('',(#10675));+#10675 = SURFACE_STYLE_FILL_AREA(#10676);+#10676 = FILL_AREA_STYLE('',(#10677));+#10677 = FILL_AREA_STYLE_COLOUR('',#10678);+#10678 = COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#10679 = CURVE_STYLE('',#10680,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10680 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10681 = STYLED_ITEM('color',(#10682),#592);+#10682 = PRESENTATION_STYLE_ASSIGNMENT((#10683,#10688));+#10683 = SURFACE_STYLE_USAGE(.BOTH.,#10684);+#10684 = SURFACE_SIDE_STYLE('',(#10685));+#10685 = SURFACE_STYLE_FILL_AREA(#10686);+#10686 = FILL_AREA_STYLE('',(#10687));+#10687 = FILL_AREA_STYLE_COLOUR('',#10551);+#10688 = CURVE_STYLE('',#10689,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10689 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10690 = STYLED_ITEM('color',(#10691),#623);+#10691 = PRESENTATION_STYLE_ASSIGNMENT((#10692,#10697));+#10692 = SURFACE_STYLE_USAGE(.BOTH.,#10693);+#10693 = SURFACE_SIDE_STYLE('',(#10694));+#10694 = SURFACE_STYLE_FILL_AREA(#10695);+#10695 = FILL_AREA_STYLE('',(#10696));+#10696 = FILL_AREA_STYLE_COLOUR('',#10678);+#10697 = CURVE_STYLE('',#10698,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10698 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10699 = STYLED_ITEM('color',(#10700),#654);+#10700 = PRESENTATION_STYLE_ASSIGNMENT((#10701,#10706));+#10701 = SURFACE_STYLE_USAGE(.BOTH.,#10702);+#10702 = SURFACE_SIDE_STYLE('',(#10703));+#10703 = SURFACE_STYLE_FILL_AREA(#10704);+#10704 = FILL_AREA_STYLE('',(#10705));+#10705 = FILL_AREA_STYLE_COLOUR('',#10551);+#10706 = CURVE_STYLE('',#10707,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10707 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10708 = STYLED_ITEM('color',(#10709),#685);+#10709 = PRESENTATION_STYLE_ASSIGNMENT((#10710,#10715));+#10710 = SURFACE_STYLE_USAGE(.BOTH.,#10711);+#10711 = SURFACE_SIDE_STYLE('',(#10712));+#10712 = SURFACE_STYLE_FILL_AREA(#10713);+#10713 = FILL_AREA_STYLE('',(#10714));+#10714 = FILL_AREA_STYLE_COLOUR('',#10678);+#10715 = CURVE_STYLE('',#10716,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10716 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10717 = STYLED_ITEM('color',(#10718),#716);+#10718 = PRESENTATION_STYLE_ASSIGNMENT((#10719,#10724));+#10719 = SURFACE_STYLE_USAGE(.BOTH.,#10720);+#10720 = SURFACE_SIDE_STYLE('',(#10721));+#10721 = SURFACE_STYLE_FILL_AREA(#10722);+#10722 = FILL_AREA_STYLE('',(#10723));+#10723 = FILL_AREA_STYLE_COLOUR('',#10551);+#10724 = CURVE_STYLE('',#10725,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10725 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10726 = STYLED_ITEM('color',(#10727),#733);+#10727 = PRESENTATION_STYLE_ASSIGNMENT((#10728,#10733));+#10728 = SURFACE_STYLE_USAGE(.BOTH.,#10729);+#10729 = SURFACE_SIDE_STYLE('',(#10730));+#10730 = SURFACE_STYLE_FILL_AREA(#10731);+#10731 = FILL_AREA_STYLE('',(#10732));+#10732 = FILL_AREA_STYLE_COLOUR('',#10551);+#10733 = CURVE_STYLE('',#10734,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10734 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10735 = STYLED_ITEM('color',(#10736),#750);+#10736 = PRESENTATION_STYLE_ASSIGNMENT((#10737,#10742));+#10737 = SURFACE_STYLE_USAGE(.BOTH.,#10738);+#10738 = SURFACE_SIDE_STYLE('',(#10739));+#10739 = SURFACE_STYLE_FILL_AREA(#10740);+#10740 = FILL_AREA_STYLE('',(#10741));+#10741 = FILL_AREA_STYLE_COLOUR('',#10678);+#10742 = CURVE_STYLE('',#10743,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10743 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10744 = STYLED_ITEM('color',(#10745),#781);+#10745 = PRESENTATION_STYLE_ASSIGNMENT((#10746,#10751));+#10746 = SURFACE_STYLE_USAGE(.BOTH.,#10747);+#10747 = SURFACE_SIDE_STYLE('',(#10748));+#10748 = SURFACE_STYLE_FILL_AREA(#10749);+#10749 = FILL_AREA_STYLE('',(#10750));+#10750 = FILL_AREA_STYLE_COLOUR('',#10551);+#10751 = CURVE_STYLE('',#10752,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10752 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10753 = STYLED_ITEM('color',(#10754),#812);+#10754 = PRESENTATION_STYLE_ASSIGNMENT((#10755,#10760));+#10755 = SURFACE_STYLE_USAGE(.BOTH.,#10756);+#10756 = SURFACE_SIDE_STYLE('',(#10757));+#10757 = SURFACE_STYLE_FILL_AREA(#10758);+#10758 = FILL_AREA_STYLE('',(#10759));+#10759 = FILL_AREA_STYLE_COLOUR('',#10678);+#10760 = CURVE_STYLE('',#10761,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10761 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10762 = STYLED_ITEM('color',(#10763),#843);+#10763 = PRESENTATION_STYLE_ASSIGNMENT((#10764,#10769));+#10764 = SURFACE_STYLE_USAGE(.BOTH.,#10765);+#10765 = SURFACE_SIDE_STYLE('',(#10766));+#10766 = SURFACE_STYLE_FILL_AREA(#10767);+#10767 = FILL_AREA_STYLE('',(#10768));+#10768 = FILL_AREA_STYLE_COLOUR('',#10551);+#10769 = CURVE_STYLE('',#10770,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10770 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10771 = STYLED_ITEM('color',(#10772),#873);+#10772 = PRESENTATION_STYLE_ASSIGNMENT((#10773,#10778));+#10773 = SURFACE_STYLE_USAGE(.BOTH.,#10774);+#10774 = SURFACE_SIDE_STYLE('',(#10775));+#10775 = SURFACE_STYLE_FILL_AREA(#10776);+#10776 = FILL_AREA_STYLE('',(#10777));+#10777 = FILL_AREA_STYLE_COLOUR('',#10551);+#10778 = CURVE_STYLE('',#10779,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10779 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10780 = STYLED_ITEM('color',(#10781),#896);+#10781 = PRESENTATION_STYLE_ASSIGNMENT((#10782,#10787));+#10782 = SURFACE_STYLE_USAGE(.BOTH.,#10783);+#10783 = SURFACE_SIDE_STYLE('',(#10784));+#10784 = SURFACE_STYLE_FILL_AREA(#10785);+#10785 = FILL_AREA_STYLE('',(#10786));+#10786 = FILL_AREA_STYLE_COLOUR('',#10551);+#10787 = CURVE_STYLE('',#10788,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10788 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10789 = STYLED_ITEM('color',(#10790),#919);+#10790 = PRESENTATION_STYLE_ASSIGNMENT((#10791,#10796));+#10791 = SURFACE_STYLE_USAGE(.BOTH.,#10792);+#10792 = SURFACE_SIDE_STYLE('',(#10793));+#10793 = SURFACE_STYLE_FILL_AREA(#10794);+#10794 = FILL_AREA_STYLE('',(#10795));+#10795 = FILL_AREA_STYLE_COLOUR('',#10551);+#10796 = CURVE_STYLE('',#10797,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10797 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10798 = STYLED_ITEM('color',(#10799),#936);+#10799 = PRESENTATION_STYLE_ASSIGNMENT((#10800,#10805));+#10800 = SURFACE_STYLE_USAGE(.BOTH.,#10801);+#10801 = SURFACE_SIDE_STYLE('',(#10802));+#10802 = SURFACE_STYLE_FILL_AREA(#10803);+#10803 = FILL_AREA_STYLE('',(#10804));+#10804 = FILL_AREA_STYLE_COLOUR('',#10678);+#10805 = CURVE_STYLE('',#10806,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10806 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10807 = STYLED_ITEM('color',(#10808),#981);+#10808 = PRESENTATION_STYLE_ASSIGNMENT((#10809,#10814));+#10809 = SURFACE_STYLE_USAGE(.BOTH.,#10810);+#10810 = SURFACE_SIDE_STYLE('',(#10811));+#10811 = SURFACE_STYLE_FILL_AREA(#10812);+#10812 = FILL_AREA_STYLE('',(#10813));+#10813 = FILL_AREA_STYLE_COLOUR('',#10551);+#10814 = CURVE_STYLE('',#10815,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10815 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10816 = STYLED_ITEM('color',(#10817),#1051);+#10817 = PRESENTATION_STYLE_ASSIGNMENT((#10818,#10823));+#10818 = SURFACE_STYLE_USAGE(.BOTH.,#10819);+#10819 = SURFACE_SIDE_STYLE('',(#10820));+#10820 = SURFACE_STYLE_FILL_AREA(#10821);+#10821 = FILL_AREA_STYLE('',(#10822));+#10822 = FILL_AREA_STYLE_COLOUR('',#10551);+#10823 = CURVE_STYLE('',#10824,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10824 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10825 = STYLED_ITEM('color',(#10826),#1074);+#10826 = PRESENTATION_STYLE_ASSIGNMENT((#10827,#10832));+#10827 = SURFACE_STYLE_USAGE(.BOTH.,#10828);+#10828 = SURFACE_SIDE_STYLE('',(#10829));+#10829 = SURFACE_STYLE_FILL_AREA(#10830);+#10830 = FILL_AREA_STYLE('',(#10831));+#10831 = FILL_AREA_STYLE_COLOUR('',#10551);+#10832 = CURVE_STYLE('',#10833,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10833 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10834 = STYLED_ITEM('color',(#10835),#1097);+#10835 = PRESENTATION_STYLE_ASSIGNMENT((#10836,#10841));+#10836 = SURFACE_STYLE_USAGE(.BOTH.,#10837);+#10837 = SURFACE_SIDE_STYLE('',(#10838));+#10838 = SURFACE_STYLE_FILL_AREA(#10839);+#10839 = FILL_AREA_STYLE('',(#10840));+#10840 = FILL_AREA_STYLE_COLOUR('',#10551);+#10841 = CURVE_STYLE('',#10842,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10842 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10843 = STYLED_ITEM('color',(#10844),#1120);+#10844 = PRESENTATION_STYLE_ASSIGNMENT((#10845,#10850));+#10845 = SURFACE_STYLE_USAGE(.BOTH.,#10846);+#10846 = SURFACE_SIDE_STYLE('',(#10847));+#10847 = SURFACE_STYLE_FILL_AREA(#10848);+#10848 = FILL_AREA_STYLE('',(#10849));+#10849 = FILL_AREA_STYLE_COLOUR('',#10551);+#10850 = CURVE_STYLE('',#10851,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10851 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10852 = STYLED_ITEM('color',(#10853),#1175);+#10853 = PRESENTATION_STYLE_ASSIGNMENT((#10854,#10859));+#10854 = SURFACE_STYLE_USAGE(.BOTH.,#10855);+#10855 = SURFACE_SIDE_STYLE('',(#10856));+#10856 = SURFACE_STYLE_FILL_AREA(#10857);+#10857 = FILL_AREA_STYLE('',(#10858));+#10858 = FILL_AREA_STYLE_COLOUR('',#10678);+#10859 = CURVE_STYLE('',#10860,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10860 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10861 = STYLED_ITEM('color',(#10862),#1213);+#10862 = PRESENTATION_STYLE_ASSIGNMENT((#10863,#10868));+#10863 = SURFACE_STYLE_USAGE(.BOTH.,#10864);+#10864 = SURFACE_SIDE_STYLE('',(#10865));+#10865 = SURFACE_STYLE_FILL_AREA(#10866);+#10866 = FILL_AREA_STYLE('',(#10867));+#10867 = FILL_AREA_STYLE_COLOUR('',#10551);+#10868 = CURVE_STYLE('',#10869,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10869 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10870 = STYLED_ITEM('color',(#10871),#1262);+#10871 = PRESENTATION_STYLE_ASSIGNMENT((#10872,#10877));+#10872 = SURFACE_STYLE_USAGE(.BOTH.,#10873);+#10873 = SURFACE_SIDE_STYLE('',(#10874));+#10874 = SURFACE_STYLE_FILL_AREA(#10875);+#10875 = FILL_AREA_STYLE('',(#10876));+#10876 = FILL_AREA_STYLE_COLOUR('',#10678);+#10877 = CURVE_STYLE('',#10878,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10878 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10879 = STYLED_ITEM('color',(#10880),#1354);+#10880 = PRESENTATION_STYLE_ASSIGNMENT((#10881,#10886));+#10881 = SURFACE_STYLE_USAGE(.BOTH.,#10882);+#10882 = SURFACE_SIDE_STYLE('',(#10883));+#10883 = SURFACE_STYLE_FILL_AREA(#10884);+#10884 = FILL_AREA_STYLE('',(#10885));+#10885 = FILL_AREA_STYLE_COLOUR('',#10678);+#10886 = CURVE_STYLE('',#10887,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10887 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10888 = STYLED_ITEM('color',(#10889),#1379);+#10889 = PRESENTATION_STYLE_ASSIGNMENT((#10890,#10895));+#10890 = SURFACE_STYLE_USAGE(.BOTH.,#10891);+#10891 = SURFACE_SIDE_STYLE('',(#10892));+#10892 = SURFACE_STYLE_FILL_AREA(#10893);+#10893 = FILL_AREA_STYLE('',(#10894));+#10894 = FILL_AREA_STYLE_COLOUR('',#10678);+#10895 = CURVE_STYLE('',#10896,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10896 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10897 = STYLED_ITEM('color',(#10898),#1463);+#10898 = PRESENTATION_STYLE_ASSIGNMENT((#10899,#10904));+#10899 = SURFACE_STYLE_USAGE(.BOTH.,#10900);+#10900 = SURFACE_SIDE_STYLE('',(#10901));+#10901 = SURFACE_STYLE_FILL_AREA(#10902);+#10902 = FILL_AREA_STYLE('',(#10903));+#10903 = FILL_AREA_STYLE_COLOUR('',#10551);+#10904 = CURVE_STYLE('',#10905,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10905 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10906 = STYLED_ITEM('color',(#10907),#1485);+#10907 = PRESENTATION_STYLE_ASSIGNMENT((#10908,#10913));+#10908 = SURFACE_STYLE_USAGE(.BOTH.,#10909);+#10909 = SURFACE_SIDE_STYLE('',(#10910));+#10910 = SURFACE_STYLE_FILL_AREA(#10911);+#10911 = FILL_AREA_STYLE('',(#10912));+#10912 = FILL_AREA_STYLE_COLOUR('',#10678);+#10913 = CURVE_STYLE('',#10914,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10914 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10915 = STYLED_ITEM('color',(#10916),#1577);+#10916 = PRESENTATION_STYLE_ASSIGNMENT((#10917,#10922));+#10917 = SURFACE_STYLE_USAGE(.BOTH.,#10918);+#10918 = SURFACE_SIDE_STYLE('',(#10919));+#10919 = SURFACE_STYLE_FILL_AREA(#10920);+#10920 = FILL_AREA_STYLE('',(#10921));+#10921 = FILL_AREA_STYLE_COLOUR('',#10678);+#10922 = CURVE_STYLE('',#10923,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10923 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10924 = STYLED_ITEM('color',(#10925),#1602);+#10925 = PRESENTATION_STYLE_ASSIGNMENT((#10926,#10931));+#10926 = SURFACE_STYLE_USAGE(.BOTH.,#10927);+#10927 = SURFACE_SIDE_STYLE('',(#10928));+#10928 = SURFACE_STYLE_FILL_AREA(#10929);+#10929 = FILL_AREA_STYLE('',(#10930));+#10930 = FILL_AREA_STYLE_COLOUR('',#10678);+#10931 = CURVE_STYLE('',#10932,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10932 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10933 = STYLED_ITEM('color',(#10934),#1686);+#10934 = PRESENTATION_STYLE_ASSIGNMENT((#10935,#10940));+#10935 = SURFACE_STYLE_USAGE(.BOTH.,#10936);+#10936 = SURFACE_SIDE_STYLE('',(#10937));+#10937 = SURFACE_STYLE_FILL_AREA(#10938);+#10938 = FILL_AREA_STYLE('',(#10939));+#10939 = FILL_AREA_STYLE_COLOUR('',#10551);+#10940 = CURVE_STYLE('',#10941,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#10941 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10942 = STYLED_ITEM('color',(#10943),#1703);+#10943 = PRESENTATION_STYLE_ASSIGNMENT((#10944,#10949));+#10944 = SURFACE_STYLE_USAGE(.BOTH.,#10945);+#10945 = SURFACE_SIDE_STYLE('',(#10946));+#10946 = SURFACE_STYLE_FILL_AREA(#10947);+#10947 = FILL_AREA_STYLE('',(#10948));+#10948 = FILL_AREA_STYLE_COLOUR('',#10678);+#10949 = CURVE_STYLE('',#10950,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10950 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10951 = STYLED_ITEM('color',(#10952),#1788);+#10952 = PRESENTATION_STYLE_ASSIGNMENT((#10953,#10958));+#10953 = SURFACE_STYLE_USAGE(.BOTH.,#10954);+#10954 = SURFACE_SIDE_STYLE('',(#10955));+#10955 = SURFACE_STYLE_FILL_AREA(#10956);+#10956 = FILL_AREA_STYLE('',(#10957));+#10957 = FILL_AREA_STYLE_COLOUR('',#10678);+#10958 = CURVE_STYLE('',#10959,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10959 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10960 = STYLED_ITEM('color',(#10961),#1813);+#10961 = PRESENTATION_STYLE_ASSIGNMENT((#10962,#10967));+#10962 = SURFACE_STYLE_USAGE(.BOTH.,#10963);+#10963 = SURFACE_SIDE_STYLE('',(#10964));+#10964 = SURFACE_STYLE_FILL_AREA(#10965);+#10965 = FILL_AREA_STYLE('',(#10966));+#10966 = FILL_AREA_STYLE_COLOUR('',#10678);+#10967 = CURVE_STYLE('',#10968,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10968 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10969 = STYLED_ITEM('color',(#10970),#1890);+#10970 = PRESENTATION_STYLE_ASSIGNMENT((#10971,#10976));+#10971 = SURFACE_STYLE_USAGE(.BOTH.,#10972);+#10972 = SURFACE_SIDE_STYLE('',(#10973));+#10973 = SURFACE_STYLE_FILL_AREA(#10974);+#10974 = FILL_AREA_STYLE('',(#10975));+#10975 = FILL_AREA_STYLE_COLOUR('',#10678);+#10976 = CURVE_STYLE('',#10977,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10977 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10978 = STYLED_ITEM('color',(#10979),#1975);+#10979 = PRESENTATION_STYLE_ASSIGNMENT((#10980,#10985));+#10980 = SURFACE_STYLE_USAGE(.BOTH.,#10981);+#10981 = SURFACE_SIDE_STYLE('',(#10982));+#10982 = SURFACE_STYLE_FILL_AREA(#10983);+#10983 = FILL_AREA_STYLE('',(#10984));+#10984 = FILL_AREA_STYLE_COLOUR('',#10678);+#10985 = CURVE_STYLE('',#10986,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10986 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10987 = STYLED_ITEM('color',(#10988),#2000);+#10988 = PRESENTATION_STYLE_ASSIGNMENT((#10989,#10994));+#10989 = SURFACE_STYLE_USAGE(.BOTH.,#10990);+#10990 = SURFACE_SIDE_STYLE('',(#10991));+#10991 = SURFACE_STYLE_FILL_AREA(#10992);+#10992 = FILL_AREA_STYLE('',(#10993));+#10993 = FILL_AREA_STYLE_COLOUR('',#10678);+#10994 = CURVE_STYLE('',#10995,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#10995 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10996 = STYLED_ITEM('color',(#10997),#2077);+#10997 = PRESENTATION_STYLE_ASSIGNMENT((#10998,#11003));+#10998 = SURFACE_STYLE_USAGE(.BOTH.,#10999);+#10999 = SURFACE_SIDE_STYLE('',(#11000));+#11000 = SURFACE_STYLE_FILL_AREA(#11001);+#11001 = FILL_AREA_STYLE('',(#11002));+#11002 = FILL_AREA_STYLE_COLOUR('',#10551);+#11003 = CURVE_STYLE('',#11004,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#11004 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11005 = STYLED_ITEM('color',(#11006),#2094);+#11006 = PRESENTATION_STYLE_ASSIGNMENT((#11007,#11012));+#11007 = SURFACE_STYLE_USAGE(.BOTH.,#11008);+#11008 = SURFACE_SIDE_STYLE('',(#11009));+#11009 = SURFACE_STYLE_FILL_AREA(#11010);+#11010 = FILL_AREA_STYLE('',(#11011));+#11011 = FILL_AREA_STYLE_COLOUR('',#10678);+#11012 = CURVE_STYLE('',#11013,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11013 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11014 = STYLED_ITEM('color',(#11015),#2186);+#11015 = PRESENTATION_STYLE_ASSIGNMENT((#11016,#11021));+#11016 = SURFACE_STYLE_USAGE(.BOTH.,#11017);+#11017 = SURFACE_SIDE_STYLE('',(#11018));+#11018 = SURFACE_STYLE_FILL_AREA(#11019);+#11019 = FILL_AREA_STYLE('',(#11020));+#11020 = FILL_AREA_STYLE_COLOUR('',#10678);+#11021 = CURVE_STYLE('',#11022,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11022 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11023 = STYLED_ITEM('color',(#11024),#2211);+#11024 = PRESENTATION_STYLE_ASSIGNMENT((#11025,#11030));+#11025 = SURFACE_STYLE_USAGE(.BOTH.,#11026);+#11026 = SURFACE_SIDE_STYLE('',(#11027));+#11027 = SURFACE_STYLE_FILL_AREA(#11028);+#11028 = FILL_AREA_STYLE('',(#11029));+#11029 = FILL_AREA_STYLE_COLOUR('',#10678);+#11030 = CURVE_STYLE('',#11031,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11031 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11032 = STYLED_ITEM('color',(#11033),#2295);+#11033 = PRESENTATION_STYLE_ASSIGNMENT((#11034,#11039));+#11034 = SURFACE_STYLE_USAGE(.BOTH.,#11035);+#11035 = SURFACE_SIDE_STYLE('',(#11036));+#11036 = SURFACE_STYLE_FILL_AREA(#11037);+#11037 = FILL_AREA_STYLE('',(#11038));+#11038 = FILL_AREA_STYLE_COLOUR('',#10678);+#11039 = CURVE_STYLE('',#11040,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11040 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11041 = STYLED_ITEM('color',(#11042),#2312);+#11042 = PRESENTATION_STYLE_ASSIGNMENT((#11043,#11048));+#11043 = SURFACE_STYLE_USAGE(.BOTH.,#11044);+#11044 = SURFACE_SIDE_STYLE('',(#11045));+#11045 = SURFACE_STYLE_FILL_AREA(#11046);+#11046 = FILL_AREA_STYLE('',(#11047));+#11047 = FILL_AREA_STYLE_COLOUR('',#10678);+#11048 = CURVE_STYLE('',#11049,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11049 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11050 = STYLED_ITEM('color',(#11051),#2331);+#11051 = PRESENTATION_STYLE_ASSIGNMENT((#11052,#11057));+#11052 = SURFACE_STYLE_USAGE(.BOTH.,#11053);+#11053 = SURFACE_SIDE_STYLE('',(#11054));+#11054 = SURFACE_STYLE_FILL_AREA(#11055);+#11055 = FILL_AREA_STYLE('',(#11056));+#11056 = FILL_AREA_STYLE_COLOUR('',#10678);+#11057 = CURVE_STYLE('',#11058,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11058 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11059 = STYLED_ITEM('color',(#11060),#2350);+#11060 = PRESENTATION_STYLE_ASSIGNMENT((#11061,#11066));+#11061 = SURFACE_STYLE_USAGE(.BOTH.,#11062);+#11062 = SURFACE_SIDE_STYLE('',(#11063));+#11063 = SURFACE_STYLE_FILL_AREA(#11064);+#11064 = FILL_AREA_STYLE('',(#11065));+#11065 = FILL_AREA_STYLE_COLOUR('',#10551);+#11066 = CURVE_STYLE('',#11067,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#11067 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11068 = STYLED_ITEM('color',(#11069),#2396);+#11069 = PRESENTATION_STYLE_ASSIGNMENT((#11070,#11075));+#11070 = SURFACE_STYLE_USAGE(.BOTH.,#11071);+#11071 = SURFACE_SIDE_STYLE('',(#11072));+#11072 = SURFACE_STYLE_FILL_AREA(#11073);+#11073 = FILL_AREA_STYLE('',(#11074));+#11074 = FILL_AREA_STYLE_COLOUR('',#10551);+#11075 = CURVE_STYLE('',#11076,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#11076 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11077 = STYLED_ITEM('color',(#11078),#2412);+#11078 = PRESENTATION_STYLE_ASSIGNMENT((#11079,#11084));+#11079 = SURFACE_STYLE_USAGE(.BOTH.,#11080);+#11080 = SURFACE_SIDE_STYLE('',(#11081));+#11081 = SURFACE_STYLE_FILL_AREA(#11082);+#11082 = FILL_AREA_STYLE('',(#11083));+#11083 = FILL_AREA_STYLE_COLOUR('',#10678);+#11084 = CURVE_STYLE('',#11085,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11085 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11086 = STYLED_ITEM('color',(#11087),#2431);+#11087 = PRESENTATION_STYLE_ASSIGNMENT((#11088,#11093));+#11088 = SURFACE_STYLE_USAGE(.BOTH.,#11089);+#11089 = SURFACE_SIDE_STYLE('',(#11090));+#11090 = SURFACE_STYLE_FILL_AREA(#11091);+#11091 = FILL_AREA_STYLE('',(#11092));+#11092 = FILL_AREA_STYLE_COLOUR('',#10551);+#11093 = CURVE_STYLE('',#11094,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#11094 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11095 = STYLED_ITEM('color',(#11096),#2447);+#11096 = PRESENTATION_STYLE_ASSIGNMENT((#11097,#11102));+#11097 = SURFACE_STYLE_USAGE(.BOTH.,#11098);+#11098 = SURFACE_SIDE_STYLE('',(#11099));+#11099 = SURFACE_STYLE_FILL_AREA(#11100);+#11100 = FILL_AREA_STYLE('',(#11101));+#11101 = FILL_AREA_STYLE_COLOUR('',#10678);+#11102 = CURVE_STYLE('',#11103,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11103 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11104 = STYLED_ITEM('color',(#11105),#2464);+#11105 = PRESENTATION_STYLE_ASSIGNMENT((#11106,#11111));+#11106 = SURFACE_STYLE_USAGE(.BOTH.,#11107);+#11107 = SURFACE_SIDE_STYLE('',(#11108));+#11108 = SURFACE_STYLE_FILL_AREA(#11109);+#11109 = FILL_AREA_STYLE('',(#11110));+#11110 = FILL_AREA_STYLE_COLOUR('',#10551);+#11111 = CURVE_STYLE('',#11112,POSITIVE_LENGTH_MEASURE(0.1),#10551);+#11112 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11113 = STYLED_ITEM('color',(#11114),#2476);+#11114 = PRESENTATION_STYLE_ASSIGNMENT((#11115,#11120));+#11115 = SURFACE_STYLE_USAGE(.BOTH.,#11116);+#11116 = SURFACE_SIDE_STYLE('',(#11117));+#11117 = SURFACE_STYLE_FILL_AREA(#11118);+#11118 = FILL_AREA_STYLE('',(#11119));+#11119 = FILL_AREA_STYLE_COLOUR('',#10678);+#11120 = CURVE_STYLE('',#11121,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11121 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11122 = STYLED_ITEM('color',(#11123),#2493);+#11123 = PRESENTATION_STYLE_ASSIGNMENT((#11124,#11129));+#11124 = SURFACE_STYLE_USAGE(.BOTH.,#11125);+#11125 = SURFACE_SIDE_STYLE('',(#11126));+#11126 = SURFACE_STYLE_FILL_AREA(#11127);+#11127 = FILL_AREA_STYLE('',(#11128));+#11128 = FILL_AREA_STYLE_COLOUR('',#10678);+#11129 = CURVE_STYLE('',#11130,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11130 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11131 = STYLED_ITEM('color',(#11132),#2510);+#11132 = PRESENTATION_STYLE_ASSIGNMENT((#11133,#11138));+#11133 = SURFACE_STYLE_USAGE(.BOTH.,#11134);+#11134 = SURFACE_SIDE_STYLE('',(#11135));+#11135 = SURFACE_STYLE_FILL_AREA(#11136);+#11136 = FILL_AREA_STYLE('',(#11137));+#11137 = FILL_AREA_STYLE_COLOUR('',#10678);+#11138 = CURVE_STYLE('',#11139,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11139 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11140 = STYLED_ITEM('color',(#11141),#2527);+#11141 = PRESENTATION_STYLE_ASSIGNMENT((#11142,#11147));+#11142 = SURFACE_STYLE_USAGE(.BOTH.,#11143);+#11143 = SURFACE_SIDE_STYLE('',(#11144));+#11144 = SURFACE_STYLE_FILL_AREA(#11145);+#11145 = FILL_AREA_STYLE('',(#11146));+#11146 = FILL_AREA_STYLE_COLOUR('',#10678);+#11147 = CURVE_STYLE('',#11148,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11148 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11149 = STYLED_ITEM('color',(#11150),#2544);+#11150 = PRESENTATION_STYLE_ASSIGNMENT((#11151,#11156));+#11151 = SURFACE_STYLE_USAGE(.BOTH.,#11152);+#11152 = SURFACE_SIDE_STYLE('',(#11153));+#11153 = SURFACE_STYLE_FILL_AREA(#11154);+#11154 = FILL_AREA_STYLE('',(#11155));+#11155 = FILL_AREA_STYLE_COLOUR('',#10678);+#11156 = CURVE_STYLE('',#11157,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11157 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11158 = STYLED_ITEM('color',(#11159),#2561);+#11159 = PRESENTATION_STYLE_ASSIGNMENT((#11160,#11165));+#11160 = SURFACE_STYLE_USAGE(.BOTH.,#11161);+#11161 = SURFACE_SIDE_STYLE('',(#11162));+#11162 = SURFACE_STYLE_FILL_AREA(#11163);+#11163 = FILL_AREA_STYLE('',(#11164));+#11164 = FILL_AREA_STYLE_COLOUR('',#10678);+#11165 = CURVE_STYLE('',#11166,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11166 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11167 = STYLED_ITEM('color',(#11168),#2578);+#11168 = PRESENTATION_STYLE_ASSIGNMENT((#11169,#11174));+#11169 = SURFACE_STYLE_USAGE(.BOTH.,#11170);+#11170 = SURFACE_SIDE_STYLE('',(#11171));+#11171 = SURFACE_STYLE_FILL_AREA(#11172);+#11172 = FILL_AREA_STYLE('',(#11173));+#11173 = FILL_AREA_STYLE_COLOUR('',#10678);+#11174 = CURVE_STYLE('',#11175,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11175 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11176 = STYLED_ITEM('color',(#11177),#2595);+#11177 = PRESENTATION_STYLE_ASSIGNMENT((#11178,#11183));+#11178 = SURFACE_STYLE_USAGE(.BOTH.,#11179);+#11179 = SURFACE_SIDE_STYLE('',(#11180));+#11180 = SURFACE_STYLE_FILL_AREA(#11181);+#11181 = FILL_AREA_STYLE('',(#11182));+#11182 = FILL_AREA_STYLE_COLOUR('',#10678);+#11183 = CURVE_STYLE('',#11184,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11184 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11185 = STYLED_ITEM('color',(#11186),#2607);+#11186 = PRESENTATION_STYLE_ASSIGNMENT((#11187,#11192));+#11187 = SURFACE_STYLE_USAGE(.BOTH.,#11188);+#11188 = SURFACE_SIDE_STYLE('',(#11189));+#11189 = SURFACE_STYLE_FILL_AREA(#11190);+#11190 = FILL_AREA_STYLE('',(#11191));+#11191 = FILL_AREA_STYLE_COLOUR('',#10678);+#11192 = CURVE_STYLE('',#11193,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11193 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11194 = STYLED_ITEM('color',(#11195),#2624);+#11195 = PRESENTATION_STYLE_ASSIGNMENT((#11196,#11201));+#11196 = SURFACE_STYLE_USAGE(.BOTH.,#11197);+#11197 = SURFACE_SIDE_STYLE('',(#11198));+#11198 = SURFACE_STYLE_FILL_AREA(#11199);+#11199 = FILL_AREA_STYLE('',(#11200));+#11200 = FILL_AREA_STYLE_COLOUR('',#10678);+#11201 = CURVE_STYLE('',#11202,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11202 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11203 = STYLED_ITEM('color',(#11204),#2641);+#11204 = PRESENTATION_STYLE_ASSIGNMENT((#11205,#11210));+#11205 = SURFACE_STYLE_USAGE(.BOTH.,#11206);+#11206 = SURFACE_SIDE_STYLE('',(#11207));+#11207 = SURFACE_STYLE_FILL_AREA(#11208);+#11208 = FILL_AREA_STYLE('',(#11209));+#11209 = FILL_AREA_STYLE_COLOUR('',#10678);+#11210 = CURVE_STYLE('',#11211,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11211 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11212 = STYLED_ITEM('color',(#11213),#2658);+#11213 = PRESENTATION_STYLE_ASSIGNMENT((#11214,#11219));+#11214 = SURFACE_STYLE_USAGE(.BOTH.,#11215);+#11215 = SURFACE_SIDE_STYLE('',(#11216));+#11216 = SURFACE_STYLE_FILL_AREA(#11217);+#11217 = FILL_AREA_STYLE('',(#11218));+#11218 = FILL_AREA_STYLE_COLOUR('',#10678);+#11219 = CURVE_STYLE('',#11220,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11220 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11221 = STYLED_ITEM('color',(#11222),#2675);+#11222 = PRESENTATION_STYLE_ASSIGNMENT((#11223,#11228));+#11223 = SURFACE_STYLE_USAGE(.BOTH.,#11224);+#11224 = SURFACE_SIDE_STYLE('',(#11225));+#11225 = SURFACE_STYLE_FILL_AREA(#11226);+#11226 = FILL_AREA_STYLE('',(#11227));+#11227 = FILL_AREA_STYLE_COLOUR('',#10678);+#11228 = CURVE_STYLE('',#11229,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11229 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11230 = STYLED_ITEM('color',(#11231),#2692);+#11231 = PRESENTATION_STYLE_ASSIGNMENT((#11232,#11237));+#11232 = SURFACE_STYLE_USAGE(.BOTH.,#11233);+#11233 = SURFACE_SIDE_STYLE('',(#11234));+#11234 = SURFACE_STYLE_FILL_AREA(#11235);+#11235 = FILL_AREA_STYLE('',(#11236));+#11236 = FILL_AREA_STYLE_COLOUR('',#10678);+#11237 = CURVE_STYLE('',#11238,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11238 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11239 = STYLED_ITEM('color',(#11240),#2709);+#11240 = PRESENTATION_STYLE_ASSIGNMENT((#11241,#11246));+#11241 = SURFACE_STYLE_USAGE(.BOTH.,#11242);+#11242 = SURFACE_SIDE_STYLE('',(#11243));+#11243 = SURFACE_STYLE_FILL_AREA(#11244);+#11244 = FILL_AREA_STYLE('',(#11245));+#11245 = FILL_AREA_STYLE_COLOUR('',#10678);+#11246 = CURVE_STYLE('',#11247,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11247 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11248 = STYLED_ITEM('color',(#11249),#2726);+#11249 = PRESENTATION_STYLE_ASSIGNMENT((#11250,#11255));+#11250 = SURFACE_STYLE_USAGE(.BOTH.,#11251);+#11251 = SURFACE_SIDE_STYLE('',(#11252));+#11252 = SURFACE_STYLE_FILL_AREA(#11253);+#11253 = FILL_AREA_STYLE('',(#11254));+#11254 = FILL_AREA_STYLE_COLOUR('',#10678);+#11255 = CURVE_STYLE('',#11256,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11256 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11257 = STYLED_ITEM('color',(#11258),#2738);+#11258 = PRESENTATION_STYLE_ASSIGNMENT((#11259,#11264));+#11259 = SURFACE_STYLE_USAGE(.BOTH.,#11260);+#11260 = SURFACE_SIDE_STYLE('',(#11261));+#11261 = SURFACE_STYLE_FILL_AREA(#11262);+#11262 = FILL_AREA_STYLE('',(#11263));+#11263 = FILL_AREA_STYLE_COLOUR('',#10678);+#11264 = CURVE_STYLE('',#11265,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11265 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11266 = STYLED_ITEM('color',(#11267),#2755);+#11267 = PRESENTATION_STYLE_ASSIGNMENT((#11268,#11273));+#11268 = SURFACE_STYLE_USAGE(.BOTH.,#11269);+#11269 = SURFACE_SIDE_STYLE('',(#11270));+#11270 = SURFACE_STYLE_FILL_AREA(#11271);+#11271 = FILL_AREA_STYLE('',(#11272));+#11272 = FILL_AREA_STYLE_COLOUR('',#10678);+#11273 = CURVE_STYLE('',#11274,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11274 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11275 = STYLED_ITEM('color',(#11276),#2772);+#11276 = PRESENTATION_STYLE_ASSIGNMENT((#11277,#11282));+#11277 = SURFACE_STYLE_USAGE(.BOTH.,#11278);+#11278 = SURFACE_SIDE_STYLE('',(#11279));+#11279 = SURFACE_STYLE_FILL_AREA(#11280);+#11280 = FILL_AREA_STYLE('',(#11281));+#11281 = FILL_AREA_STYLE_COLOUR('',#10678);+#11282 = CURVE_STYLE('',#11283,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11283 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11284 = STYLED_ITEM('color',(#11285),#2789);+#11285 = PRESENTATION_STYLE_ASSIGNMENT((#11286,#11291));+#11286 = SURFACE_STYLE_USAGE(.BOTH.,#11287);+#11287 = SURFACE_SIDE_STYLE('',(#11288));+#11288 = SURFACE_STYLE_FILL_AREA(#11289);+#11289 = FILL_AREA_STYLE('',(#11290));+#11290 = FILL_AREA_STYLE_COLOUR('',#10678);+#11291 = CURVE_STYLE('',#11292,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11292 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11293 = STYLED_ITEM('color',(#11294),#2806);+#11294 = PRESENTATION_STYLE_ASSIGNMENT((#11295,#11300));+#11295 = SURFACE_STYLE_USAGE(.BOTH.,#11296);+#11296 = SURFACE_SIDE_STYLE('',(#11297));+#11297 = SURFACE_STYLE_FILL_AREA(#11298);+#11298 = FILL_AREA_STYLE('',(#11299));+#11299 = FILL_AREA_STYLE_COLOUR('',#10678);+#11300 = CURVE_STYLE('',#11301,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11301 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11302 = STYLED_ITEM('color',(#11303),#2823);+#11303 = PRESENTATION_STYLE_ASSIGNMENT((#11304,#11309));+#11304 = SURFACE_STYLE_USAGE(.BOTH.,#11305);+#11305 = SURFACE_SIDE_STYLE('',(#11306));+#11306 = SURFACE_STYLE_FILL_AREA(#11307);+#11307 = FILL_AREA_STYLE('',(#11308));+#11308 = FILL_AREA_STYLE_COLOUR('',#10678);+#11309 = CURVE_STYLE('',#11310,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11310 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11311 = STYLED_ITEM('color',(#11312),#2840);+#11312 = PRESENTATION_STYLE_ASSIGNMENT((#11313,#11318));+#11313 = SURFACE_STYLE_USAGE(.BOTH.,#11314);+#11314 = SURFACE_SIDE_STYLE('',(#11315));+#11315 = SURFACE_STYLE_FILL_AREA(#11316);+#11316 = FILL_AREA_STYLE('',(#11317));+#11317 = FILL_AREA_STYLE_COLOUR('',#10678);+#11318 = CURVE_STYLE('',#11319,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11319 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11320 = STYLED_ITEM('color',(#11321),#2852);+#11321 = PRESENTATION_STYLE_ASSIGNMENT((#11322,#11327));+#11322 = SURFACE_STYLE_USAGE(.BOTH.,#11323);+#11323 = SURFACE_SIDE_STYLE('',(#11324));+#11324 = SURFACE_STYLE_FILL_AREA(#11325);+#11325 = FILL_AREA_STYLE('',(#11326));+#11326 = FILL_AREA_STYLE_COLOUR('',#10678);+#11327 = CURVE_STYLE('',#11328,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11328 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11329 = STYLED_ITEM('color',(#11330),#2869);+#11330 = PRESENTATION_STYLE_ASSIGNMENT((#11331,#11336));+#11331 = SURFACE_STYLE_USAGE(.BOTH.,#11332);+#11332 = SURFACE_SIDE_STYLE('',(#11333));+#11333 = SURFACE_STYLE_FILL_AREA(#11334);+#11334 = FILL_AREA_STYLE('',(#11335));+#11335 = FILL_AREA_STYLE_COLOUR('',#10678);+#11336 = CURVE_STYLE('',#11337,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11337 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11338 = STYLED_ITEM('color',(#11339),#2886);+#11339 = PRESENTATION_STYLE_ASSIGNMENT((#11340,#11345));+#11340 = SURFACE_STYLE_USAGE(.BOTH.,#11341);+#11341 = SURFACE_SIDE_STYLE('',(#11342));+#11342 = SURFACE_STYLE_FILL_AREA(#11343);+#11343 = FILL_AREA_STYLE('',(#11344));+#11344 = FILL_AREA_STYLE_COLOUR('',#10678);+#11345 = CURVE_STYLE('',#11346,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11346 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11347 = STYLED_ITEM('color',(#11348),#2903);+#11348 = PRESENTATION_STYLE_ASSIGNMENT((#11349,#11354));+#11349 = SURFACE_STYLE_USAGE(.BOTH.,#11350);+#11350 = SURFACE_SIDE_STYLE('',(#11351));+#11351 = SURFACE_STYLE_FILL_AREA(#11352);+#11352 = FILL_AREA_STYLE('',(#11353));+#11353 = FILL_AREA_STYLE_COLOUR('',#10678);+#11354 = CURVE_STYLE('',#11355,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11355 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11356 = STYLED_ITEM('color',(#11357),#2920);+#11357 = PRESENTATION_STYLE_ASSIGNMENT((#11358,#11363));+#11358 = SURFACE_STYLE_USAGE(.BOTH.,#11359);+#11359 = SURFACE_SIDE_STYLE('',(#11360));+#11360 = SURFACE_STYLE_FILL_AREA(#11361);+#11361 = FILL_AREA_STYLE('',(#11362));+#11362 = FILL_AREA_STYLE_COLOUR('',#10678);+#11363 = CURVE_STYLE('',#11364,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11364 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11365 = STYLED_ITEM('color',(#11366),#2937);+#11366 = PRESENTATION_STYLE_ASSIGNMENT((#11367,#11372));+#11367 = SURFACE_STYLE_USAGE(.BOTH.,#11368);+#11368 = SURFACE_SIDE_STYLE('',(#11369));+#11369 = SURFACE_STYLE_FILL_AREA(#11370);+#11370 = FILL_AREA_STYLE('',(#11371));+#11371 = FILL_AREA_STYLE_COLOUR('',#10678);+#11372 = CURVE_STYLE('',#11373,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11373 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11374 = STYLED_ITEM('color',(#11375),#2954);+#11375 = PRESENTATION_STYLE_ASSIGNMENT((#11376,#11381));+#11376 = SURFACE_STYLE_USAGE(.BOTH.,#11377);+#11377 = SURFACE_SIDE_STYLE('',(#11378));+#11378 = SURFACE_STYLE_FILL_AREA(#11379);+#11379 = FILL_AREA_STYLE('',(#11380));+#11380 = FILL_AREA_STYLE_COLOUR('',#10678);+#11381 = CURVE_STYLE('',#11382,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11382 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11383 = STYLED_ITEM('color',(#11384),#2966);+#11384 = PRESENTATION_STYLE_ASSIGNMENT((#11385,#11390));+#11385 = SURFACE_STYLE_USAGE(.BOTH.,#11386);+#11386 = SURFACE_SIDE_STYLE('',(#11387));+#11387 = SURFACE_STYLE_FILL_AREA(#11388);+#11388 = FILL_AREA_STYLE('',(#11389));+#11389 = FILL_AREA_STYLE_COLOUR('',#10678);+#11390 = CURVE_STYLE('',#11391,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11391 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11392 = STYLED_ITEM('color',(#11393),#2983);+#11393 = PRESENTATION_STYLE_ASSIGNMENT((#11394,#11399));+#11394 = SURFACE_STYLE_USAGE(.BOTH.,#11395);+#11395 = SURFACE_SIDE_STYLE('',(#11396));+#11396 = SURFACE_STYLE_FILL_AREA(#11397);+#11397 = FILL_AREA_STYLE('',(#11398));+#11398 = FILL_AREA_STYLE_COLOUR('',#10678);+#11399 = CURVE_STYLE('',#11400,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11400 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11401 = STYLED_ITEM('color',(#11402),#3000);+#11402 = PRESENTATION_STYLE_ASSIGNMENT((#11403,#11408));+#11403 = SURFACE_STYLE_USAGE(.BOTH.,#11404);+#11404 = SURFACE_SIDE_STYLE('',(#11405));+#11405 = SURFACE_STYLE_FILL_AREA(#11406);+#11406 = FILL_AREA_STYLE('',(#11407));+#11407 = FILL_AREA_STYLE_COLOUR('',#10678);+#11408 = CURVE_STYLE('',#11409,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11409 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11410 = STYLED_ITEM('color',(#11411),#3017);+#11411 = PRESENTATION_STYLE_ASSIGNMENT((#11412,#11417));+#11412 = SURFACE_STYLE_USAGE(.BOTH.,#11413);+#11413 = SURFACE_SIDE_STYLE('',(#11414));+#11414 = SURFACE_STYLE_FILL_AREA(#11415);+#11415 = FILL_AREA_STYLE('',(#11416));+#11416 = FILL_AREA_STYLE_COLOUR('',#10678);+#11417 = CURVE_STYLE('',#11418,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11418 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11419 = STYLED_ITEM('color',(#11420),#3034);+#11420 = PRESENTATION_STYLE_ASSIGNMENT((#11421,#11426));+#11421 = SURFACE_STYLE_USAGE(.BOTH.,#11422);+#11422 = SURFACE_SIDE_STYLE('',(#11423));+#11423 = SURFACE_STYLE_FILL_AREA(#11424);+#11424 = FILL_AREA_STYLE('',(#11425));+#11425 = FILL_AREA_STYLE_COLOUR('',#10678);+#11426 = CURVE_STYLE('',#11427,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11427 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11428 = STYLED_ITEM('color',(#11429),#3051);+#11429 = PRESENTATION_STYLE_ASSIGNMENT((#11430,#11435));+#11430 = SURFACE_STYLE_USAGE(.BOTH.,#11431);+#11431 = SURFACE_SIDE_STYLE('',(#11432));+#11432 = SURFACE_STYLE_FILL_AREA(#11433);+#11433 = FILL_AREA_STYLE('',(#11434));+#11434 = FILL_AREA_STYLE_COLOUR('',#10678);+#11435 = CURVE_STYLE('',#11436,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11436 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11437 = STYLED_ITEM('color',(#11438),#3068);+#11438 = PRESENTATION_STYLE_ASSIGNMENT((#11439,#11444));+#11439 = SURFACE_STYLE_USAGE(.BOTH.,#11440);+#11440 = SURFACE_SIDE_STYLE('',(#11441));+#11441 = SURFACE_STYLE_FILL_AREA(#11442);+#11442 = FILL_AREA_STYLE('',(#11443));+#11443 = FILL_AREA_STYLE_COLOUR('',#10678);+#11444 = CURVE_STYLE('',#11445,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11445 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11446 = STYLED_ITEM('color',(#11447),#3085);+#11447 = PRESENTATION_STYLE_ASSIGNMENT((#11448,#11453));+#11448 = SURFACE_STYLE_USAGE(.BOTH.,#11449);+#11449 = SURFACE_SIDE_STYLE('',(#11450));+#11450 = SURFACE_STYLE_FILL_AREA(#11451);+#11451 = FILL_AREA_STYLE('',(#11452));+#11452 = FILL_AREA_STYLE_COLOUR('',#10678);+#11453 = CURVE_STYLE('',#11454,POSITIVE_LENGTH_MEASURE(0.1),#10678);+#11454 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11455 = STYLED_ITEM('color',(#11456),#3097);+#11456 = PRESENTATION_STYLE_ASSIGNMENT((#11457,#11463));+#11457 = SURFACE_STYLE_USAGE(.BOTH.,#11458);+#11458 = SURFACE_SIDE_STYLE('',(#11459));+#11459 = SURFACE_STYLE_FILL_AREA(#11460);+#11460 = FILL_AREA_STYLE('',(#11461));+#11461 = FILL_AREA_STYLE_COLOUR('',#11462);+#11462 = COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#11463 = CURVE_STYLE('',#11464,POSITIVE_LENGTH_MEASURE(0.1),#11462);+#11464 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11465 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+ #11466,#11476,#11485,#11494,#11503,#11512,#11521,#11530,#11539,+ #11548,#11557,#11566,#11575,#11584,#11593),#10532);+#11466 = STYLED_ITEM('color',(#11467),#3125);+#11467 = PRESENTATION_STYLE_ASSIGNMENT((#11468,#11474));+#11468 = SURFACE_STYLE_USAGE(.BOTH.,#11469);+#11469 = SURFACE_SIDE_STYLE('',(#11470));+#11470 = SURFACE_STYLE_FILL_AREA(#11471);+#11471 = FILL_AREA_STYLE('',(#11472));+#11472 = FILL_AREA_STYLE_COLOUR('',#11473);+#11473 = COLOUR_RGB('',0.78000000177,0.789999995908,0.800000010877);+#11474 = CURVE_STYLE('',#11475,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11476 = STYLED_ITEM('color',(#11477),#4115);+#11477 = PRESENTATION_STYLE_ASSIGNMENT((#11478,#11483));+#11478 = SURFACE_STYLE_USAGE(.BOTH.,#11479);+#11479 = SURFACE_SIDE_STYLE('',(#11480));+#11480 = SURFACE_STYLE_FILL_AREA(#11481);+#11481 = FILL_AREA_STYLE('',(#11482));+#11482 = FILL_AREA_STYLE_COLOUR('',#11473);+#11483 = CURVE_STYLE('',#11484,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11484 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11485 = STYLED_ITEM('color',(#11486),#4397);+#11486 = PRESENTATION_STYLE_ASSIGNMENT((#11487,#11492));+#11487 = SURFACE_STYLE_USAGE(.BOTH.,#11488);+#11488 = SURFACE_SIDE_STYLE('',(#11489));+#11489 = SURFACE_STYLE_FILL_AREA(#11490);+#11490 = FILL_AREA_STYLE('',(#11491));+#11491 = FILL_AREA_STYLE_COLOUR('',#11473);+#11492 = CURVE_STYLE('',#11493,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11493 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11494 = STYLED_ITEM('color',(#11495),#4844);+#11495 = PRESENTATION_STYLE_ASSIGNMENT((#11496,#11501));+#11496 = SURFACE_STYLE_USAGE(.BOTH.,#11497);+#11497 = SURFACE_SIDE_STYLE('',(#11498));+#11498 = SURFACE_STYLE_FILL_AREA(#11499);+#11499 = FILL_AREA_STYLE('',(#11500));+#11500 = FILL_AREA_STYLE_COLOUR('',#11473);+#11501 = CURVE_STYLE('',#11502,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11502 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11503 = STYLED_ITEM('color',(#11504),#5344);+#11504 = PRESENTATION_STYLE_ASSIGNMENT((#11505,#11510));+#11505 = SURFACE_STYLE_USAGE(.BOTH.,#11506);+#11506 = SURFACE_SIDE_STYLE('',(#11507));+#11507 = SURFACE_STYLE_FILL_AREA(#11508);+#11508 = FILL_AREA_STYLE('',(#11509));+#11509 = FILL_AREA_STYLE_COLOUR('',#11473);+#11510 = CURVE_STYLE('',#11511,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11511 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11512 = STYLED_ITEM('color',(#11513),#5725);+#11513 = PRESENTATION_STYLE_ASSIGNMENT((#11514,#11519));+#11514 = SURFACE_STYLE_USAGE(.BOTH.,#11515);+#11515 = SURFACE_SIDE_STYLE('',(#11516));+#11516 = SURFACE_STYLE_FILL_AREA(#11517);+#11517 = FILL_AREA_STYLE('',(#11518));+#11518 = FILL_AREA_STYLE_COLOUR('',#11473);+#11519 = CURVE_STYLE('',#11520,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11520 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11521 = STYLED_ITEM('color',(#11522),#6023);+#11522 = PRESENTATION_STYLE_ASSIGNMENT((#11523,#11528));+#11523 = SURFACE_STYLE_USAGE(.BOTH.,#11524);+#11524 = SURFACE_SIDE_STYLE('',(#11525));+#11525 = SURFACE_STYLE_FILL_AREA(#11526);+#11526 = FILL_AREA_STYLE('',(#11527));+#11527 = FILL_AREA_STYLE_COLOUR('',#11473);+#11528 = CURVE_STYLE('',#11529,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11529 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11530 = STYLED_ITEM('color',(#11531),#6605);+#11531 = PRESENTATION_STYLE_ASSIGNMENT((#11532,#11537));+#11532 = SURFACE_STYLE_USAGE(.BOTH.,#11533);+#11533 = SURFACE_SIDE_STYLE('',(#11534));+#11534 = SURFACE_STYLE_FILL_AREA(#11535);+#11535 = FILL_AREA_STYLE('',(#11536));+#11536 = FILL_AREA_STYLE_COLOUR('',#11473);+#11537 = CURVE_STYLE('',#11538,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11538 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11539 = STYLED_ITEM('color',(#11540),#6903);+#11540 = PRESENTATION_STYLE_ASSIGNMENT((#11541,#11546));+#11541 = SURFACE_STYLE_USAGE(.BOTH.,#11542);+#11542 = SURFACE_SIDE_STYLE('',(#11543));+#11543 = SURFACE_STYLE_FILL_AREA(#11544);+#11544 = FILL_AREA_STYLE('',(#11545));+#11545 = FILL_AREA_STYLE_COLOUR('',#11473);+#11546 = CURVE_STYLE('',#11547,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11547 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11548 = STYLED_ITEM('color',(#11549),#7485);+#11549 = PRESENTATION_STYLE_ASSIGNMENT((#11550,#11555));+#11550 = SURFACE_STYLE_USAGE(.BOTH.,#11551);+#11551 = SURFACE_SIDE_STYLE('',(#11552));+#11552 = SURFACE_STYLE_FILL_AREA(#11553);+#11553 = FILL_AREA_STYLE('',(#11554));+#11554 = FILL_AREA_STYLE_COLOUR('',#11473);+#11555 = CURVE_STYLE('',#11556,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11556 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11557 = STYLED_ITEM('color',(#11558),#7833);+#11558 = PRESENTATION_STYLE_ASSIGNMENT((#11559,#11564));+#11559 = SURFACE_STYLE_USAGE(.BOTH.,#11560);+#11560 = SURFACE_SIDE_STYLE('',(#11561));+#11561 = SURFACE_STYLE_FILL_AREA(#11562);+#11562 = FILL_AREA_STYLE('',(#11563));+#11563 = FILL_AREA_STYLE_COLOUR('',#11473);+#11564 = CURVE_STYLE('',#11565,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11565 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11566 = STYLED_ITEM('color',(#11567),#8399);+#11567 = PRESENTATION_STYLE_ASSIGNMENT((#11568,#11573));+#11568 = SURFACE_STYLE_USAGE(.BOTH.,#11569);+#11569 = SURFACE_SIDE_STYLE('',(#11570));+#11570 = SURFACE_STYLE_FILL_AREA(#11571);+#11571 = FILL_AREA_STYLE('',(#11572));+#11572 = FILL_AREA_STYLE_COLOUR('',#11473);+#11573 = CURVE_STYLE('',#11574,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11574 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11575 = STYLED_ITEM('color',(#11576),#8846);+#11576 = PRESENTATION_STYLE_ASSIGNMENT((#11577,#11582));+#11577 = SURFACE_STYLE_USAGE(.BOTH.,#11578);+#11578 = SURFACE_SIDE_STYLE('',(#11579));+#11579 = SURFACE_STYLE_FILL_AREA(#11580);+#11580 = FILL_AREA_STYLE('',(#11581));+#11581 = FILL_AREA_STYLE_COLOUR('',#11473);+#11582 = CURVE_STYLE('',#11583,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11583 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11584 = STYLED_ITEM('color',(#11585),#9161);+#11585 = PRESENTATION_STYLE_ASSIGNMENT((#11586,#11591));+#11586 = SURFACE_STYLE_USAGE(.BOTH.,#11587);+#11587 = SURFACE_SIDE_STYLE('',(#11588));+#11588 = SURFACE_STYLE_FILL_AREA(#11589);+#11589 = FILL_AREA_STYLE('',(#11590));+#11590 = FILL_AREA_STYLE_COLOUR('',#11473);+#11591 = CURVE_STYLE('',#11592,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11592 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#11593 = STYLED_ITEM('color',(#11594),#10184);+#11594 = PRESENTATION_STYLE_ASSIGNMENT((#11595,#11600));+#11595 = SURFACE_STYLE_USAGE(.BOTH.,#11596);+#11596 = SURFACE_SIDE_STYLE('',(#11597));+#11597 = SURFACE_STYLE_FILL_AREA(#11598);+#11598 = FILL_AREA_STYLE('',(#11599));+#11599 = FILL_AREA_STYLE_COLOUR('',#11473);+#11600 = CURVE_STYLE('',#11601,POSITIVE_LENGTH_MEASURE(0.1),#11473);+#11601 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+ENDSEC;+END-ISO-10303-21;