← Commit history

Initial commit: component/stnrg012tr

Ray ·913eb3111a ·
2 files changed +269
README.mdadded+56
@@ -0,0 +1,56 @@+# STNRG012TR++**STMicroelectronics** · AC-DC Controllers And Regulators · SOIC-20-300mil++STNRG012TR from STMicroelectronics, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT | power_in | High-side gate-drive floating supply voltage connected to bootstrap capacitor between this pin and FGND, voltage range -0.3 to 600 + VCC V. |+| 2 | HVG | output | High-side gate-drive output capable of 0.5 A source and 0.75 A sink peak current (minimum values) to drive upper MOSFET of half-bridge leg. |+| 3 | FGND | power_in | High-side gate-drive floating ground serving as return path for high-side gate-drive current with internal resistor to ensure pin is never floating. |+| 4 | N.C. | unconnected | No internal connection, high-voltage spacer to isolate high-voltage section and ease compliance with safety regulations for creepage distance. |+| 5 | LVG | output | Low-side gate-drive output capable of 0.5 A source and 0.75 A sink peak current (minimum values) to drive lower MOSFET of half-bridge leg, actively pulled to GND during UVLO. |+| 6 | TX | output | UART/I2C interface transmit pin, voltage range -0.3V to VCORE+0.3 V for serial communication with external digital device. |+| 7 | RX | input | UART/I2C interface receive pin, voltage range -0.3V to VCORE+0.3 V for serial communication with external digital device. |+| 8 | LLC_CS | input | LLC tank current sensing input for voltage proportional to tank current (0-500 mV range) used for zero-crossing detection and first and second level OCP. |+| 9 | LLC_AUX | input | LLC auxiliary voltage input connected to divider sensing auxiliary voltage from LLC transformer winding, used for LLC OVP detection at 2.5 V threshold and external burst-mode control at 0.9 V. |+| 10 | LLC_FB | input | LLC feedback voltage input connected to optocoupler collector with pull-up resistor to VCORE, used for LLC feedback loop closure and burst/shutdown comparators. |+| 11 | PFC_ZCD | input | PFC zero-crossing detection input connected to PFC AUX winding through resistor divider detecting PFC inductor demagnetization for soft switching control. |+| 12 | PFC_CS | input | PFC current sense input for MOSFET current monitored through sense resistor, used for enhanced COT control with 125 mV ramp, 500 mV OCP1 threshold, and 900 mV OCP2 threshold. |+| 13 | PFC_FB | input | PFC output voltage feedback input connected to bulk capacitor divider for PFC loop closure and OVP protection at 2.33 V fixed threshold. |+| 14 | VCORE | power_in | Internal VCORE bypass capacitor connection point for analog and digital circuitry supply from internal LDO, operating range 4.75 to 5.25 V. |+| 15 | SGND | power_in | Signal ground serving as reference ground for analog signals and IC signal processing circuits. |+| 16 | PGND | power_in | Power ground serving as current return for PFC gate-driver and low-side gate-driver of half-bridge, keep separate from bias component grounding. |+| 17 | PFC_GD | output | PFC gate-driver output capable of 0.7 A source and 0.8 A sink current (minimum values) to drive power MOSFETs for PFC control. |+| 18 | VCC | power_in | Supply voltage for signal part and gate-drivers with bypass capacitor to GND, operating range 9.5 to 19 V with internal clamp voltage of 19 V. |+| 19 | N.C. | unconnected | No internal connection, high-voltage spacer to isolate high-voltage section and ease compliance with safety regulations for creepage distance. |+| 20 | VAC | input | High-voltage startup generator input connected directly to mains voltage through two diodes, voltage range -1 to 800 V, with internal 20 MΩ resistor divider for line voltage sensing, brownout detection, and synchronization. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-20-300mil |+| Category | Power Management (PMIC) |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `STNRG012TR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `stnrg012tr-etched.step` / `stnrg012tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stnrg012tr.step` / `stnrg012tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603079016497111040) (34 pp, sha256 `58802d8b534056a7`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stnrg012tr-datasheet.pdf)
page.jsonadded+213
@@ -0,0 +1,213 @@+{+  "slug": "stnrg012tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics AC-DC Controllers And Regulators, SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "stnrg012tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stnrg012tr.kicad_sym",+    "stnrg012tr.kicad_mod",+    "stnrg012tr.glb",+    "stnrg012tr.step",+    "stnrg012tr.lbr",+    "docs/hero.png",+    "docs/stnrg012tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STNRG012TR",+    "manufacturer": "STMicroelectronics",+    "package": "SOIC-20-300mil",+    "pin_count": 20,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603079016497111040",+    "parts": {+      "symbol": "stnrg012tr.kicad_sym",+      "footprint": "stnrg012tr.kicad_mod",+      "model_3d": "stnrg012tr-etched.glb",+      "model_3d_plain": "stnrg012tr.glb",+      "model_3d_step": "stnrg012tr-etched.step",+      "model_3d_step_plain": "stnrg012tr.step",+      "lbr": "stnrg012tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C3093758"+    },+    "pins": [+      {+        "number": "1",+        "name": "BOOT",+        "type": "power_in",+        "description": "High-side gate-drive floating supply voltage connected to bootstrap capacitor between this pin and FGND, voltage range -0.3 to 600 + VCC V."+      },+      {+        "number": "2",+        "name": "HVG",+        "type": "output",+        "description": "High-side gate-drive output capable of 0.5 A source and 0.75 A sink peak current (minimum values) to drive upper MOSFET of half-bridge leg."+      },+      {+        "number": "3",+        "name": "FGND",+        "type": "power_in",+        "description": "High-side gate-drive floating ground serving as return path for high-side gate-drive current with internal resistor to ensure pin is never floating."+      },+      {+        "number": "4",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No internal connection, high-voltage spacer to isolate high-voltage section and ease compliance with safety regulations for creepage distance."+      },+      {+        "number": "5",+        "name": "LVG",+        "type": "output",+        "description": "Low-side gate-drive output capable of 0.5 A source and 0.75 A sink peak current (minimum values) to drive lower MOSFET of half-bridge leg, actively pulled to GND during UVLO."+      },+      {+        "number": "6",+        "name": "TX",+        "type": "output",+        "description": "UART/I2C interface transmit pin, voltage range -0.3V to VCORE+0.3 V for serial communication with external digital device."+      },+      {+        "number": "7",+        "name": "RX",+        "type": "input",+        "description": "UART/I2C interface receive pin, voltage range -0.3V to VCORE+0.3 V for serial communication with external digital device."+      },+      {+        "number": "8",+        "name": "LLC_CS",+        "type": "input",+        "description": "LLC tank current sensing input for voltage proportional to tank current (0-500 mV range) used for zero-crossing detection and first and second level OCP."+      },+      {+        "number": "9",+        "name": "LLC_AUX",+        "type": "input",+        "description": "LLC auxiliary voltage input connected to divider sensing auxiliary voltage from LLC transformer winding, used for LLC OVP detection at 2.5 V threshold and external burst-mode control at 0.9 V."+      },+      {+        "number": "10",+        "name": "LLC_FB",+        "type": "input",+        "description": "LLC feedback voltage input connected to optocoupler collector with pull-up resistor to VCORE, used for LLC feedback loop closure and burst/shutdown comparators."+      },+      {+        "number": "11",+        "name": "PFC_ZCD",+        "type": "input",+        "description": "PFC zero-crossing detection input connected to PFC AUX winding through resistor divider detecting PFC inductor demagnetization for soft switching control."+      },+      {+        "number": "12",+        "name": "PFC_CS",+        "type": "input",+        "description": "PFC current sense input for MOSFET current monitored through sense resistor, used for enhanced COT control with 125 mV ramp, 500 mV OCP1 threshold, and 900 mV OCP2 threshold."+      },+      {+        "number": "13",+        "name": "PFC_FB",+        "type": "input",+        "description": "PFC output voltage feedback input connected to bulk capacitor divider for PFC loop closure and OVP protection at 2.33 V fixed threshold."+      },+      {+        "number": "14",+        "name": "VCORE",+        "type": "power_in",+        "description": "Internal VCORE bypass capacitor connection point for analog and digital circuitry supply from internal LDO, operating range 4.75 to 5.25 V."+      },+      {+        "number": "15",+        "name": "SGND",+        "type": "power_in",+        "description": "Signal ground serving as reference ground for analog signals and IC signal processing circuits."+      },+      {+        "number": "16",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground serving as current return for PFC gate-driver and low-side gate-driver of half-bridge, keep separate from bias component grounding."+      },+      {+        "number": "17",+        "name": "PFC_GD",+        "type": "output",+        "description": "PFC gate-driver output capable of 0.7 A source and 0.8 A sink current (minimum values) to drive power MOSFETs for PFC control."+      },+      {+        "number": "18",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage for signal part and gate-drivers with bypass capacitor to GND, operating range 9.5 to 19 V with internal clamp voltage of 19 V."+      },+      {+        "number": "19",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No internal connection, high-voltage spacer to isolate high-voltage section and ease compliance with safety regulations for creepage distance."+      },+      {+        "number": "20",+        "name": "VAC",+        "type": "input",+        "description": "High-voltage startup generator input connected directly to mains voltage through two diodes, voltage range -1 to 800 V, with internal 20 MΩ resistor divider for line voltage sensing, brownout detection, and synchronization."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 34,+        "cost_usd": 0.2565,+        "at": "2026-09-23T22:27:28"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603079016497111040",+        "pages": 34,+        "sha256": "58802d8b534056a7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file