← Commit history

Initial commit: component/stm8s903f3m6

Ray ·5ed24f2011 ·
2 files changed +269
README.mdadded+56
@@ -0,0 +1,56 @@+# STM8S903F3M6++**STMicroelectronics** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-20-300mil++STM8S903F3M6 from STMicroelectronics, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 4 | NRST | bidirectional | Reset input with internal 30-80 kΩ pull-up resistor and filtered input for active-low asynchronous reset. |+| 5 | PA1/OSCIN | bidirectional | Port A pin with oscillator crystal/resonator input for high-speed external clock source (1-16 MHz). |+| 6 | PA2/OSCOUT | bidirectional | Port A pin with oscillator crystal/resonator output for external crystal/resonator operation (1-16 MHz). |+| 7 | VSS | power_in | Digital ground (0V reference) for power return and signal reference. |+| 8 | VCAP | power_out | 1.8V regulated output from internal voltage regulator requiring external 470-3300 nF capacitor with ESR 0-0.3 Ω. |+| 9 | VDD | power_in | Digital power supply input (2.95-5.5V operating range) with maximum 100 mA total source capability. |+| 10 | PA3/TIM5_CH3 | bidirectional | Port A GPIO pin with Timer 5 channel 3 capture/compare/PWM, remappable to SPI master/slave select or UART1 transmit. |+| 11 | PB5/I2C_SDA | bidirectional | Port B GPIO pin with I2C data line (true open-drain output, 400 kbit/s maximum), alternate Timer 1 break input. |+| 12 | PB4/I2C_SCL | bidirectional | Port B GPIO pin with I2C clock line (true open-drain output, 400 kbit/s maximum), alternate ADC external trigger. |+| 13 | PC3/TIM1_CH3/TLI | bidirectional | Port C GPIO pin for Timer 1 channel 3 capture/compare or top-level interrupt input, remappable to Timer 1 inverted channel 1. |+| 14 | PC4/TIM1_CH4/CLK_CCO/AIN2 | bidirectional | Port C GPIO pin with Timer 1 channel 4, configurable master clock output, or 10-bit ADC input channel 2 (0-VDD). |+| 15 | PC5/SPI_SCK | bidirectional | Port C GPIO pin with SPI serial clock output (8 Mbit/s master, 7 Mbit/s slave), remappable to Timer 5 channel 1. |+| 16 | PC6/SPI_MOSI | bidirectional | Port C GPIO pin with SPI master out/slave in data line (8 Mbit/s bidirectional), remappable to Timer 1 channel 1. |+| 17 | PC7/SPI_MISO | bidirectional | Port C GPIO pin with SPI master in/slave out data line (8 Mbit/s bidirectional), remappable to Timer 1 channel 2. |+| 18 | PD1/SWIM | bidirectional | Port D GPIO pin for single-wire interface module (SWIM) debug communication with 145 bytes/ms maximum data rate. |+| 19 | PD2/AIN3 | bidirectional | Port D GPIO pin with 10-bit ADC analog input channel 3 (input range 0-VDD), remappable to Timer 5 channel 3. |+| 20 | PD3/AIN4/TIM5_CH2/ADC_ETR | bidirectional | Port D GPIO pin with 10-bit ADC input channel 4, Timer 5 channel 2, or ADC external trigger input. |+| 1 | PD4/TIM5_CH1/BEEP | bidirectional | Port D GPIO pin with Timer 5 channel 1, BEEP audio output (1, 2, or 4 kHz selectable), or UART1 clock via option byte. |+| 2 | PD5/AIN5/UART1_TX | bidirectional | Port D GPIO pin with 10-bit ADC analog input channel 5 (0-VDD) or UART1 transmit data output (1 Mbit/s maximum). |+| 3 | PD6/AIN6/UART1_RX | bidirectional | Port D GPIO pin with 10-bit ADC analog input channel 6 (0-VDD) or UART1 receive data input (1 Mbit/s maximum). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-20-300mil |+| Category | Single Chip Microcomputer/Microcontroller |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `STM8S903F3M6`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `stm8s903f3m6-etched.step` / `stm8s903f3m6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm8s903f3m6.step` / `stm8s903f3m6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922897385861120) (124 pp, sha256 `76ef2064c8429253`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm8s903f3m6-datasheet.pdf)
page.jsonadded+213
@@ -0,0 +1,213 @@+{+  "slug": "stm8s903f3m6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontroller Units (MCUs/MPUs/SOCs), SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "single chip microcomputer-microcontroller",+    "stm8s903f3m6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm8s903f3m6.kicad_sym",+    "stm8s903f3m6.kicad_mod",+    "stm8s903f3m6.glb",+    "stm8s903f3m6.step",+    "stm8s903f3m6.lbr",+    "docs/hero.png",+    "docs/stm8s903f3m6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM8S903F3M6",+    "manufacturer": "STMicroelectronics",+    "package": "SOIC-20-300mil",+    "pin_count": 20,+    "category": "Single Chip Microcomputer/Microcontroller",+    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922897385861120",+    "parts": {+      "symbol": "stm8s903f3m6.kicad_sym",+      "footprint": "stm8s903f3m6.kicad_mod",+      "model_3d": "stm8s903f3m6-etched.glb",+      "model_3d_plain": "stm8s903f3m6.glb",+      "model_3d_step": "stm8s903f3m6-etched.step",+      "model_3d_step_plain": "stm8s903f3m6.step",+      "lbr": "stm8s903f3m6.lbr"+    },+    "distributor_links": {+      "lcsc": "C1341018"+    },+    "pins": [+      {+        "number": "4",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Reset input with internal 30-80 kΩ pull-up resistor and filtered input for active-low asynchronous reset."+      },+      {+        "number": "5",+        "name": "PA1/OSCIN",+        "type": "bidirectional",+        "description": "Port A pin with oscillator crystal/resonator input for high-speed external clock source (1-16 MHz)."+      },+      {+        "number": "6",+        "name": "PA2/OSCOUT",+        "type": "bidirectional",+        "description": "Port A pin with oscillator crystal/resonator output for external crystal/resonator operation (1-16 MHz)."+      },+      {+        "number": "7",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground (0V reference) for power return and signal reference."+      },+      {+        "number": "8",+        "name": "VCAP",+        "type": "power_out",+        "description": "1.8V regulated output from internal voltage regulator requiring external 470-3300 nF capacitor with ESR 0-0.3 Ω."+      },+      {+        "number": "9",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply input (2.95-5.5V operating range) with maximum 100 mA total source capability."+      },+      {+        "number": "10",+        "name": "PA3/TIM5_CH3",+        "type": "bidirectional",+        "description": "Port A GPIO pin with Timer 5 channel 3 capture/compare/PWM, remappable to SPI master/slave select or UART1 transmit."+      },+      {+        "number": "11",+        "name": "PB5/I2C_SDA",+        "type": "bidirectional",+        "description": "Port B GPIO pin with I2C data line (true open-drain output, 400 kbit/s maximum), alternate Timer 1 break input."+      },+      {+        "number": "12",+        "name": "PB4/I2C_SCL",+        "type": "bidirectional",+        "description": "Port B GPIO pin with I2C clock line (true open-drain output, 400 kbit/s maximum), alternate ADC external trigger."+      },+      {+        "number": "13",+        "name": "PC3/TIM1_CH3/TLI",+        "type": "bidirectional",+        "description": "Port C GPIO pin for Timer 1 channel 3 capture/compare or top-level interrupt input, remappable to Timer 1 inverted channel 1."+      },+      {+        "number": "14",+        "name": "PC4/TIM1_CH4/CLK_CCO/AIN2",+        "type": "bidirectional",+        "description": "Port C GPIO pin with Timer 1 channel 4, configurable master clock output, or 10-bit ADC input channel 2 (0-VDD)."+      },+      {+        "number": "15",+        "name": "PC5/SPI_SCK",+        "type": "bidirectional",+        "description": "Port C GPIO pin with SPI serial clock output (8 Mbit/s master, 7 Mbit/s slave), remappable to Timer 5 channel 1."+      },+      {+        "number": "16",+        "name": "PC6/SPI_MOSI",+        "type": "bidirectional",+        "description": "Port C GPIO pin with SPI master out/slave in data line (8 Mbit/s bidirectional), remappable to Timer 1 channel 1."+      },+      {+        "number": "17",+        "name": "PC7/SPI_MISO",+        "type": "bidirectional",+        "description": "Port C GPIO pin with SPI master in/slave out data line (8 Mbit/s bidirectional), remappable to Timer 1 channel 2."+      },+      {+        "number": "18",+        "name": "PD1/SWIM",+        "type": "bidirectional",+        "description": "Port D GPIO pin for single-wire interface module (SWIM) debug communication with 145 bytes/ms maximum data rate."+      },+      {+        "number": "19",+        "name": "PD2/AIN3",+        "type": "bidirectional",+        "description": "Port D GPIO pin with 10-bit ADC analog input channel 3 (input range 0-VDD), remappable to Timer 5 channel 3."+      },+      {+        "number": "20",+        "name": "PD3/AIN4/TIM5_CH2/ADC_ETR",+        "type": "bidirectional",+        "description": "Port D GPIO pin with 10-bit ADC input channel 4, Timer 5 channel 2, or ADC external trigger input."+      },+      {+        "number": "1",+        "name": "PD4/TIM5_CH1/BEEP",+        "type": "bidirectional",+        "description": "Port D GPIO pin with Timer 5 channel 1, BEEP audio output (1, 2, or 4 kHz selectable), or UART1 clock via option byte."+      },+      {+        "number": "2",+        "name": "PD5/AIN5/UART1_TX",+        "type": "bidirectional",+        "description": "Port D GPIO pin with 10-bit ADC analog input channel 5 (0-VDD) or UART1 transmit data output (1 Mbit/s maximum)."+      },+      {+        "number": "3",+        "name": "PD6/AIN6/UART1_RX",+        "type": "bidirectional",+        "description": "Port D GPIO pin with 10-bit ADC analog input channel 6 (0-VDD) or UART1 receive data input (1 Mbit/s maximum)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 124,+        "cost_usd": 0.8804,+        "at": "2026-09-22T13:14:15"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922897385861120",+        "pages": 124,+        "sha256": "76ef2064c8429253",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file