component
STM8S103K3T6C
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
Also listed as STM8S103K3T6CTR
← Commit history
page.json+260−8@@ -1,13 +1,270 @@ {+ "schema_version": 1,+ "type": "component", "slug": "stm8s103k3t6c",+ "title": "STM8S103K3T6C",+ "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "mcu", "stm8s103k3t6c" ],+ "component": {+ "mpn": "STM8S103K3T6C",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-32(7x7)",+ "pin_count": 32,+ "category": "MCU",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://www.st.com/resource/en/datasheet/stm8s103k3t6c.pdf",+ "parts": {+ "symbol": "stm8s103k3t6c.kicad_sym",+ "footprint": "stm8s103k3t6c.kicad_mod",+ "model_3d": "stm8s103k3t6c.glb",+ "model_3d_step": "stm8s103k3t6c.step",+ "lbr": "stm8s103k3t6c.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional device reset pin, active low. Internal pull-up holds the pin high; drive low to force a reset. Reset state is input with weak pull-up."+ },+ {+ "number": "2",+ "name": "PA1/OSCIN",+ "type": "bidirectional",+ "description": "Port A1 general-purpose I/O; alternate function is the HSE resonator/crystal input (OSCIN). Slow (O1) push-pull/open-drain output. In Halt/Active-halt mode PA1 is auto-configured as input weak pull-up and cannot wake the device."+ },+ {+ "number": "3",+ "name": "PA2/OSCOUT",+ "type": "bidirectional",+ "description": "Port A2 general-purpose I/O; alternate function is the HSE resonator/crystal output (OSCOUT). Slow (O1) push-pull/open-drain output."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground reference."+ },+ {+ "number": "5",+ "name": "VCAP",+ "type": "passive",+ "description": "1.8 V internal regulator decoupling capacitor pin. Connect an external ceramic capacitor to VSS as specified in the VCAP external capacitor section of the datasheet."+ },+ {+ "number": "6",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, operating range 2.95 V to 5.5 V."+ },+ {+ "number": "7",+ "name": "PA3/TIM2_CH3/[SPI_NSS]",+ "type": "bidirectional",+ "description": "Port A3 GPIO with high-sink capability. Default alternate function: TIM2 channel 3. Remapped alternate function: SPI master/slave select (SPI_NSS) via option bit AFR1."+ },+ {+ "number": "8",+ "name": "PF4",+ "type": "bidirectional",+ "description": "Port F4 general-purpose I/O. Slow (O1) push-pull/open-drain output, no external interrupt or high-sink capability."+ },+ {+ "number": "9",+ "name": "PB7",+ "type": "bidirectional",+ "description": "Port B7 general-purpose I/O with external interrupt capability. Slow (O1) push-pull/open-drain output."+ },+ {+ "number": "10",+ "name": "PB6",+ "type": "bidirectional",+ "description": "Port B6 general-purpose I/O with external interrupt capability. Slow (O1) push-pull/open-drain output."+ },+ {+ "number": "11",+ "name": "PB5/I2C_SDA",+ "type": "bidirectional",+ "description": "Port B5 GPIO / I2C data (SDA). True open-drain output (no P-buffer, no pull-up, no VDD protection diode) - requires an external pull-up. I2C up to 400 kbit/s."+ },+ {+ "number": "12",+ "name": "PB4/I2C_SCL",+ "type": "bidirectional",+ "description": "Port B4 GPIO / I2C clock (SCL). True open-drain output (no P-buffer, no pull-up, no VDD protection diode) - requires an external pull-up. I2C up to 400 kbit/s."+ },+ {+ "number": "13",+ "name": "PB3/AIN3/TIM1_ETR",+ "type": "bidirectional",+ "description": "Port B3 GPIO with high-sink capability. Alternate functions: ADC analog input 3 (AIN3) and TIM1 external trigger input (TIM1_ETR)."+ },+ {+ "number": "14",+ "name": "PB2/AIN2/TIM1_CH3N",+ "type": "bidirectional",+ "description": "Port B2 GPIO with high-sink capability. Alternate functions: ADC analog input 2 (AIN2) and TIM1 inverted channel 3 output (TIM1_CH3N)."+ },+ {+ "number": "15",+ "name": "PB1/AIN1/TIM1_CH2N",+ "type": "bidirectional",+ "description": "Port B1 GPIO with high-sink capability. Alternate functions: ADC analog input 1 (AIN1) and TIM1 inverted channel 2 output (TIM1_CH2N)."+ },+ {+ "number": "16",+ "name": "PB0/AIN0/TIM1_CH1N",+ "type": "bidirectional",+ "description": "Port B0 GPIO with high-sink capability. Alternate functions: ADC analog input 0 (AIN0) and TIM1 inverted channel 1 output (TIM1_CH1N)."+ },+ {+ "number": "17",+ "name": "PE5/SPI_NSS",+ "type": "bidirectional",+ "description": "Port E5 GPIO with high-sink capability. Default alternate function: SPI master/slave select (SPI_NSS)."+ },+ {+ "number": "18",+ "name": "PC1/TIM1_CH1/UART1_CK",+ "type": "bidirectional",+ "description": "Port C1 GPIO with high-sink capability. Default alternate function: TIM1 channel 1 and UART1 synchronous clock output (UART1_CK)."+ },+ {+ "number": "19",+ "name": "PC2/TIM1_CH2",+ "type": "bidirectional",+ "description": "Port C2 GPIO with high-sink capability. Default alternate function: TIM1 channel 2."+ },+ {+ "number": "20",+ "name": "PC3/TIM1_CH3",+ "type": "bidirectional",+ "description": "Port C3 GPIO with high-sink capability. Default alternate function: TIM1 channel 3."+ },+ {+ "number": "21",+ "name": "PC4/TIM1_CH4/CLK_CCO",+ "type": "bidirectional",+ "description": "Port C4 GPIO with high-sink capability. Default alternate function: TIM1 channel 4 and configurable clock output (CLK_CCO)."+ },+ {+ "number": "22",+ "name": "PC5/SPI_SCK",+ "type": "bidirectional",+ "description": "Port C5 GPIO with high-sink capability. Default alternate function: SPI clock (SPI_SCK), up to 8 Mbit/s."+ },+ {+ "number": "23",+ "name": "PC6/SPI_MOSI",+ "type": "bidirectional",+ "description": "Port C6 GPIO with high-sink capability. Default alternate function: SPI master-out/slave-in (SPI_MOSI)."+ },+ {+ "number": "24",+ "name": "PC7/SPI_MISO",+ "type": "bidirectional",+ "description": "Port C7 GPIO with high-sink capability. Default alternate function: SPI master-in/slave-out (SPI_MISO)."+ },+ {+ "number": "25",+ "name": "PD0/TIM1_BKIN/[CLK_CCO]",+ "type": "bidirectional",+ "description": "Port D0 GPIO with high-sink capability. Default alternate function: TIM1 break input (TIM1_BKIN). Remapped alternate function: configurable clock output (CLK_CCO) via option bit AFR5."+ },+ {+ "number": "26",+ "name": "PD1/SWIM",+ "type": "bidirectional",+ "description": "Port D1 GPIO with high-sink capability. Default alternate function: SWIM (Single Wire Interface Module) data - used for on-chip programming and non-intrusive debugging. Pin is input pull-up during and after reset release."+ },+ {+ "number": "27",+ "name": "PD2/[TIM2_CH3]",+ "type": "bidirectional",+ "description": "Port D2 GPIO with high-sink capability. Remapped alternate function: TIM2 channel 3 via option bit AFR1."+ },+ {+ "number": "28",+ "name": "PD3/TIM2_CH2/ADC_ETR",+ "type": "bidirectional",+ "description": "Port D3 GPIO with high-sink capability. Default alternate functions: TIM2 channel 2 and ADC external trigger (ADC_ETR)."+ },+ {+ "number": "29",+ "name": "PD4/BEEP/TIM2_CH1",+ "type": "bidirectional",+ "description": "Port D4 GPIO with high-sink capability. Default alternate functions: TIM2 channel 1 and BEEP output (beeper)."+ },+ {+ "number": "30",+ "name": "PD5/UART1_TX",+ "type": "bidirectional",+ "description": "Port D5 GPIO with high-sink capability. Default alternate function: UART1 data transmit (UART1_TX). UART1 supports asynchronous, synchronous, Smartcard, IrDA, LIN master modes."+ },+ {+ "number": "31",+ "name": "PD6/UART1_RX",+ "type": "bidirectional",+ "description": "Port D6 GPIO with high-sink capability. Default alternate function: UART1 data receive (UART1_RX)."+ },+ {+ "number": "32",+ "name": "PD7/TLI/[TIM1_CH4]",+ "type": "bidirectional",+ "description": "Port D7 GPIO with high-sink capability. Default alternate function: top-level interrupt (TLI). Remapped alternate function: TIM1 channel 4 via option bit AFR6."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/stm8s103k3t6c.pdf",+ "pages": 117,+ "sha256": "1574cc17747269f6",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 32,+ "described": 32,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "LQFP-32(7x7)",+ "Category": "MCU",+ "Pins": "32"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "stm8s103k3t6c"+ ],+ "discovery_pitch": "STM8S103K3T6C (STMicroelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +282,5 @@ "docs/stm8s103k3t6c-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }