STM8S003F3

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "stm8s003f3",+  "title": "STM8S003F3",+  "brief": "ST 8-bit STM8 value-line MCU, TSSOP-20. 16 MHz, 8 KB flash, 1 KB RAM, 128 B EEPROM. Ultra-low-cost. Datasheet-verified.",   "version": "0.1.0",-  "type": "component",-  "description": "ST 8-bit STM8 value-line MCU, TSSOP-20. 16 MHz, 8 KB flash, 1 KB RAM, 128 B EEPROM. Ultra-low-cost. Datasheet-verified.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "microcontroller",@@ -12,6 +15,196 @@     "tssop-20",     "stmicroelectronics"   ],+  "component": {+    "mpn": "STM8S003F3",+    "manufacturer": "STMicroelectronics",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Microcontroller",+    "subcategory": "8-bit STM8 MCU (value line)",+    "datasheet": "https://www.st.com/resource/en/datasheet/stm8s003f3.pdf",+    "parts": {+      "symbol": "stm8s003f3.kicad_sym",+      "footprint": "stm8s003f3.kicad_mod",+      "model_3d": "stm8s003f3.glb"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "PD4/BEEP/TIM2_CH1/UART1_CK",+        "type": "bidirectional",+        "description": "Port D bit 4. High-sink GPIO (fast/slow programmable, floating after reset). Muxed default alternate functions: TIM2 channel 1, BEEP output, and UART1 synchronous clock."+      },+      {+        "number": "2",+        "name": "PD5/AIN5/UART1_TX",+        "type": "bidirectional",+        "description": "Port D bit 5. High-sink GPIO. Muxed with ADC analog input 5 and UART1 data transmit."+      },+      {+        "number": "3",+        "name": "PD6/AIN6/UART1_RX",+        "type": "bidirectional",+        "description": "Port D bit 6. High-sink GPIO. Muxed with ADC analog input 6 and UART1 data receive."+      },+      {+        "number": "4",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active-low bidirectional reset with integrated weak pull-up. Asserted low by the internal POR/BOR, watchdog or an external reset source; can also be driven low externally to reset the device."+      },+      {+        "number": "5",+        "name": "PA1/OSCIN",+        "type": "bidirectional",+        "description": "Port A bit 1 (slow O1 output, floating after reset). Doubles as the HSE crystal/resonator input (OSCIN) or external clock input."+      },+      {+        "number": "6",+        "name": "PA2/OSCOUT",+        "type": "bidirectional",+        "description": "Port A bit 2 (slow O1 output, floating after reset). Doubles as the HSE crystal/resonator output (OSCOUT)."+      },+      {+        "number": "7",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground return for VDD."+      },+      {+        "number": "8",+        "name": "VCAP",+        "type": "passive",+        "description": "Output of the internal 1.8 V core regulator. Requires an external stabilization capacitor to VSS (see Section 9.3.1 VCAP external capacitor). Do not drive externally."+      },+      {+        "number": "9",+        "name": "VDD",+        "type": "power_in",+        "description": "Main digital power supply, 2.95 V to 5.5 V operating range. Decouple locally to VSS."+      },+      {+        "number": "10",+        "name": "PA3/TIM2_CH3/[SPI_NSS]",+        "type": "bidirectional",+        "description": "Port A bit 3. High-sink GPIO. Default alternate function: TIM2 channel 3. When alternate-function remap bit AFR1 is programmed the pin instead becomes the SPI master/slave-select input (SPI_NSS)."+      },+      {+        "number": "11",+        "name": "PB5/I2C_SDA/[TIM1_BKIN]",+        "type": "bidirectional",+        "description": "Port B bit 5. True open-drain output (no P-buffer, no weak pull-up, no protection diode to VDD); an external pull-up is required. Default alternate function: I2C SDA data line. When AFR4 is programmed the pin becomes TIM1 break input (TIM1_BKIN)."+      },+      {+        "number": "12",+        "name": "PB4/I2C_SCL/[ADC_ETR]",+        "type": "bidirectional",+        "description": "Port B bit 4. True open-drain output (no P-buffer, no weak pull-up, no protection diode to VDD); external pull-up required. Default alternate function: I2C SCL clock. When AFR4 is programmed the pin becomes ADC external trigger (ADC_ETR)."+      },+      {+        "number": "13",+        "name": "PC3/TIM1_CH3/[TLI]/[TIM1_CH1N]",+        "type": "bidirectional",+        "description": "Port C bit 3. High-sink GPIO. Default alternate function: TIM1 channel 3. Remap options: top-level interrupt (TLI) via AFR3, or TIM1 complementary channel 1 (TIM1_CH1N) via AFR7."+      },+      {+        "number": "14",+        "name": "PC4/CLK_CCO/TIM1_CH4/AIN2/[TIM1_CH2N]",+        "type": "bidirectional",+        "description": "Port C bit 4. High-sink GPIO. Default alternate functions: configurable clock output (CCO), TIM1 channel 4, and ADC analog input 2. When AFR7 is programmed the pin becomes TIM1 complementary channel 2 (TIM1_CH2N)."+      },+      {+        "number": "15",+        "name": "PC5/SPI_SCK/[TIM2_CH1]",+        "type": "bidirectional",+        "description": "Port C bit 5. High-sink GPIO. Default alternate function: SPI clock (SCK). When AFR0 is programmed the pin becomes TIM2 channel 1."+      },+      {+        "number": "16",+        "name": "PC6/SPI_MOSI/[TIM1_CH1]",+        "type": "bidirectional",+        "description": "Port C bit 6. High-sink GPIO. Default alternate function: SPI master-out/slave-in (MOSI). When AFR0 is programmed the pin becomes TIM1 channel 1."+      },+      {+        "number": "17",+        "name": "PC7/SPI_MISO/[TIM1_CH2]",+        "type": "bidirectional",+        "description": "Port C bit 7. High-sink GPIO. Default alternate function: SPI master-in/slave-out (MISO). When AFR0 is programmed the pin becomes TIM1 channel 2."+      },+      {+        "number": "18",+        "name": "PD1/SWIM",+        "type": "bidirectional",+        "description": "Port D bit 1. High-sink GPIO with fast/slow programmability (O4). SWIM single-wire debug and in-circuit programming data pin. In input pull-up during reset phase and after internal reset release to allow SWIM entry."+      },+      {+        "number": "19",+        "name": "PD2/AIN3/[TIM2_CH3]",+        "type": "bidirectional",+        "description": "Port D bit 2. High-sink GPIO. Default alternate function: ADC analog input 3. When AFR1 is programmed the pin becomes TIM2 channel 3."+      },+      {+        "number": "20",+        "name": "PD3/AIN4/TIM2_CH2/ADC_ETR",+        "type": "bidirectional",+        "description": "Port D bit 3. High-sink GPIO. Default alternate functions: ADC analog input 4, TIM2 channel 2, and ADC external trigger (ADC_ETR)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.st.com/resource/en/datasheet/stm8s003f3.pdf",+        "pages": 103,+        "sha256": "1a0775fefcda1553",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Core": "8-bit STM8",+      "Max clock": "16 MHz",+      "Flash": "8 KB",+      "RAM": "1 KB",+      "EEPROM": "128 B (100k cycles)",+      "GPIO": "16",+      "ADC": "10-bit (5 ch)",+      "Serial": "UART + SPI + I2C",+      "Supply voltage": "2.95-5.5 V",+      "Package": "TSSOP-20"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "stm8s003f3",+    "stm8s003",+    "cheap mcu",+    "8-bit stm8",+    "20 cent microcontroller"+  ],+  "discovery_pitch": "STM8S003F3 8-bit STM8 value-line MCU (TSSOP-20) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -27,10 +220,5 @@     "docs/stm8s003f3-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file