component
STM8L151K6T3
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+68@@ -0,0 +1,68 @@+# STM8L151K6T3++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)++STM8L151K6T3 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NRST/PA1 | bidirectional | Active-low reset input with pull-up at power-up (RPU 30 to 60 kΩ); as PA1 it can only be configured as open-drain or push-pull output, not as a general-purpose input. |+| 2 | PA2 | bidirectional | Port A2 with HSE oscillator input (OSC_IN); 3.6 V tolerant I/O with high sink/source (20 mA) capability; USART1_TX and SPI1_MISO are remap options. |+| 3 | PA3 | bidirectional | Port A3 with HSE oscillator output (OSC_OUT); 3.6 V tolerant I/O with high sink/source (20 mA) capability; USART1_RX and SPI1_MOSI are remap options. |+| 4 | PA4 | bidirectional | Port A4 with Timer 2 break input (TIM2_BKIN), ADC1 input 2 (ADC1_IN2) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 5 | PA5 | bidirectional | Port A5 with Timer 3 break input (TIM3_BKIN), ADC1 input 1 (ADC1_IN1) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 6 | PA6 | bidirectional | Port A6 with ADC1 input 0 (ADC1_IN0) and comparator 1 positive input (COMP1_INP); ADC1 trigger is available as a remap option; 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 7 | VSS1/VSSA/VREF- | power_in | I/O ground, analog ground and ADC1 negative voltage reference. |+| 8 | VDD1/VDDA/VREF+ | power_in | Digital power supply, analog supply and ADC1 positive voltage reference; the device operates from 1.8 V to 3.6 V (down to 1.65 V at power down). |+| 9 | PD0 | bidirectional | Port D0 with Timer 3 channel 2 (TIM3_CH2), ADC1 input 22 (ADC1_IN22) and comparator 1 and 2 positive inputs; 3.6 V tolerant I/O, and this pin function is available on STM8L151xx devices only. |+| 10 | PD1 | bidirectional | Port D1 with Timer 1 inverted channel 3 (TIM1_CH3N), ADC1 input 21 (ADC1_IN21) and comparator 1 and 2 positive inputs; 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 11 | PD2 | bidirectional | Port D2 with Timer 1 channel 1 (TIM1_CH1), ADC1 input 20 (ADC1_IN20) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 12 | PD3 | bidirectional | Port D3 with Timer 1 external trigger (TIM1_ETR), ADC1 input 19 (ADC1_IN19) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 13 | PB0 | bidirectional | Port B0 with Timer 2 channel 1 (TIM2_CH1), ADC1 input 18 (ADC1_IN18) and comparator 1 positive input (COMP1_INP); a pull-up is applied during reset and the pin is floating input after reset release, 3.6 V tolerant with high sink/source (20 mA) capability. |+| 14 | PB1 | bidirectional | Port B1 with Timer 3 channel 1 (TIM3_CH1), ADC1 input 17 (ADC1_IN17) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 15 | PB2 | bidirectional | Port B2 with Timer 2 channel 2 (TIM2_CH2), ADC1 input 16 (ADC1_IN16) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 16 | PB3 | bidirectional | Port B3 with Timer 2 external trigger (TIM2_ETR, remap), Timer 1 inverted channel 2 (TIM1_CH2N), ADC1 input 15 (ADC1_IN15) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 17 | PB4 | bidirectional | Port B4 with SPI1 master/slave select (SPI1_NSS, remap), ADC1 input 14 (ADC1_IN14), DAC output (DAC_OUT) and comparator 1 positive input (COMP1_INP); a pull-up is applied during reset and the pin is floating input after reset release. |+| 18 | PB5 | bidirectional | Port B5 with SPI1 clock (SPI1_SCK, remap), ADC1 input 13 (ADC1_IN13), DAC output (DAC_OUT) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 19 | PB6 | bidirectional | Port B6 with SPI1 master out/slave in (SPI1_MOSI, remap), ADC1 input 12 (ADC1_IN12), DAC output (DAC_OUT) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 20 | PB7 | bidirectional | Port B7 with SPI1 master in/slave out (SPI1_MISO, remap), ADC1 input 11 (ADC1_IN11) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 21 | PD4 | bidirectional | Port D4 with Timer 1 channel 2 (TIM1_CH2), ADC1 input 10 (ADC1_IN10) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 22 | PD5 | bidirectional | Port D5 with Timer 1 channel 3 (TIM1_CH3), ADC1 input 9 (ADC1_IN9) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 23 | PD6 | bidirectional | Port D6 with Timer 1 break input (TIM1_BKIN), ADC1 input 8 (ADC1_IN8), RTC calibration (RTC_CALIB), internal voltage reference output (VREFINT) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 24 | PD7 | bidirectional | Port D7 with Timer 1 inverted channel 1 (TIM1_CH1N), ADC1 input 7 (ADC1_IN7), RTC alarm (RTC_ALARM), internal voltage reference output (VREFINT) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 25 | PC0 | bidirectional | Port C0 with I2C1 data (I2C1_SDA); 5 V tolerant I/O configured as true open-drain (no protection diode to VDD). |+| 26 | PC1 | bidirectional | Port C1 with I2C1 clock (I2C1_SCL); 5 V tolerant I/O configured as true open-drain (no protection diode to VDD). |+| 27 | PC2 | bidirectional | Port C2 with USART1 receive (USART1_RX), ADC1 input 6 (ADC1_IN6), comparator 1 positive input (COMP1_INP) and internal voltage reference output (VREFINT); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 28 | PC3 | bidirectional | Port C3 with USART1 transmit (USART1_TX), ADC1 input 5 (ADC1_IN5), comparator 1 positive input (COMP1_INP) and comparator 2 negative input (COMP2_INM); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 29 | PC4 | bidirectional | Port C4 with USART1 synchronous clock (USART1_CK), I2C1_SMB, configurable clock output (CCO), ADC1 input 4 (ADC1_IN4), comparator 2 negative input (COMP2_INM) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 30 | PC5 | bidirectional | Port C5 with LSE oscillator input (OSC32_IN), SPI1 master/slave select (SPI1_NSS, remap) and USART1 transmit (USART1_TX, remap); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 31 | PC6 | bidirectional | Port C6 with LSE oscillator output (OSC32_OUT), SPI1 clock (SPI1_SCK, remap) and USART1 receive (USART1_RX, remap); 3.6 V tolerant I/O with high sink/source (20 mA) capability. |+| 32 | PA0 | bidirectional | Port A0 with USART1 synchronous clock (USART1_CK, remap), SWIM input and output, beep output (BEEP) and infrared timer output (IR_TIM); high sink LED driver capability, and the pin is in input pull-up during reset and after reset release. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-32(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `STM8L151K6T3`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm8l151k6t3-etched.step` / `stm8l151k6t3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm8l151k6t3.step` / `stm8l151k6t3.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922459260772352) (141 pp, sha256 `76f669f0972e887a`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm8l151k6t3-datasheet.pdf)
page.jsonadded+344@@ -0,0 +1,344 @@+{+ "slug": "stm8l151k6t3",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm8l151k6t3",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm8l151k6t3.kicad_sym",+ "stm8l151k6t3.kicad_mod",+ "stm8l151k6t3.glb",+ "stm8l151k6t3.step",+ "stm8l151k6t3.lbr",+ "docs/hero.png",+ "docs/stm8l151k6t3-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm8l151k6t3-hero.glb",+ "stm8l151k6t3-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM8L151K6T3",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-32(7x7)",+ "pin_count": 32,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922459260772352",+ "parts": {+ "symbol": "stm8l151k6t3.kicad_sym",+ "footprint": "stm8l151k6t3.kicad_mod",+ "model_3d": "stm8l151k6t3-hero.glb",+ "model_3d_plain": "stm8l151k6t3.glb",+ "model_3d_step": "stm8l151k6t3-etched.step",+ "model_3d_step_plain": "stm8l151k6t3.step",+ "lbr": "stm8l151k6t3.lbr"+ },+ "distributor_links": {+ "lcsc": "C1340431",+ "digikey": "497-19224-ND",+ "mouser": "511-STM8L151K6T3"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T11:48:55Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-19224-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-STM8L151K6T3",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NRST/PA1",+ "type": "bidirectional",+ "description": "Active-low reset input with pull-up at power-up (RPU 30 to 60 kΩ); as PA1 it can only be configured as open-drain or push-pull output, not as a general-purpose input."+ },+ {+ "number": "2",+ "name": "PA2",+ "type": "bidirectional",+ "description": "Port A2 with HSE oscillator input (OSC_IN); 3.6 V tolerant I/O with high sink/source (20 mA) capability; USART1_TX and SPI1_MISO are remap options."+ },+ {+ "number": "3",+ "name": "PA3",+ "type": "bidirectional",+ "description": "Port A3 with HSE oscillator output (OSC_OUT); 3.6 V tolerant I/O with high sink/source (20 mA) capability; USART1_RX and SPI1_MOSI are remap options."+ },+ {+ "number": "4",+ "name": "PA4",+ "type": "bidirectional",+ "description": "Port A4 with Timer 2 break input (TIM2_BKIN), ADC1 input 2 (ADC1_IN2) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "5",+ "name": "PA5",+ "type": "bidirectional",+ "description": "Port A5 with Timer 3 break input (TIM3_BKIN), ADC1 input 1 (ADC1_IN1) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "6",+ "name": "PA6",+ "type": "bidirectional",+ "description": "Port A6 with ADC1 input 0 (ADC1_IN0) and comparator 1 positive input (COMP1_INP); ADC1 trigger is available as a remap option; 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "7",+ "name": "VSS1/VSSA/VREF-",+ "type": "power_in",+ "description": "I/O ground, analog ground and ADC1 negative voltage reference."+ },+ {+ "number": "8",+ "name": "VDD1/VDDA/VREF+",+ "type": "power_in",+ "description": "Digital power supply, analog supply and ADC1 positive voltage reference; the device operates from 1.8 V to 3.6 V (down to 1.65 V at power down)."+ },+ {+ "number": "9",+ "name": "PD0",+ "type": "bidirectional",+ "description": "Port D0 with Timer 3 channel 2 (TIM3_CH2), ADC1 input 22 (ADC1_IN22) and comparator 1 and 2 positive inputs; 3.6 V tolerant I/O, and this pin function is available on STM8L151xx devices only."+ },+ {+ "number": "10",+ "name": "PD1",+ "type": "bidirectional",+ "description": "Port D1 with Timer 1 inverted channel 3 (TIM1_CH3N), ADC1 input 21 (ADC1_IN21) and comparator 1 and 2 positive inputs; 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "11",+ "name": "PD2",+ "type": "bidirectional",+ "description": "Port D2 with Timer 1 channel 1 (TIM1_CH1), ADC1 input 20 (ADC1_IN20) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "12",+ "name": "PD3",+ "type": "bidirectional",+ "description": "Port D3 with Timer 1 external trigger (TIM1_ETR), ADC1 input 19 (ADC1_IN19) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "13",+ "name": "PB0",+ "type": "bidirectional",+ "description": "Port B0 with Timer 2 channel 1 (TIM2_CH1), ADC1 input 18 (ADC1_IN18) and comparator 1 positive input (COMP1_INP); a pull-up is applied during reset and the pin is floating input after reset release, 3.6 V tolerant with high sink/source (20 mA) capability."+ },+ {+ "number": "14",+ "name": "PB1",+ "type": "bidirectional",+ "description": "Port B1 with Timer 3 channel 1 (TIM3_CH1), ADC1 input 17 (ADC1_IN17) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "15",+ "name": "PB2",+ "type": "bidirectional",+ "description": "Port B2 with Timer 2 channel 2 (TIM2_CH2), ADC1 input 16 (ADC1_IN16) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "16",+ "name": "PB3",+ "type": "bidirectional",+ "description": "Port B3 with Timer 2 external trigger (TIM2_ETR, remap), Timer 1 inverted channel 2 (TIM1_CH2N), ADC1 input 15 (ADC1_IN15) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "17",+ "name": "PB4",+ "type": "bidirectional",+ "description": "Port B4 with SPI1 master/slave select (SPI1_NSS, remap), ADC1 input 14 (ADC1_IN14), DAC output (DAC_OUT) and comparator 1 positive input (COMP1_INP); a pull-up is applied during reset and the pin is floating input after reset release."+ },+ {+ "number": "18",+ "name": "PB5",+ "type": "bidirectional",+ "description": "Port B5 with SPI1 clock (SPI1_SCK, remap), ADC1 input 13 (ADC1_IN13), DAC output (DAC_OUT) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "19",+ "name": "PB6",+ "type": "bidirectional",+ "description": "Port B6 with SPI1 master out/slave in (SPI1_MOSI, remap), ADC1 input 12 (ADC1_IN12), DAC output (DAC_OUT) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "20",+ "name": "PB7",+ "type": "bidirectional",+ "description": "Port B7 with SPI1 master in/slave out (SPI1_MISO, remap), ADC1 input 11 (ADC1_IN11) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "21",+ "name": "PD4",+ "type": "bidirectional",+ "description": "Port D4 with Timer 1 channel 2 (TIM1_CH2), ADC1 input 10 (ADC1_IN10) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "22",+ "name": "PD5",+ "type": "bidirectional",+ "description": "Port D5 with Timer 1 channel 3 (TIM1_CH3), ADC1 input 9 (ADC1_IN9) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "23",+ "name": "PD6",+ "type": "bidirectional",+ "description": "Port D6 with Timer 1 break input (TIM1_BKIN), ADC1 input 8 (ADC1_IN8), RTC calibration (RTC_CALIB), internal voltage reference output (VREFINT) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "24",+ "name": "PD7",+ "type": "bidirectional",+ "description": "Port D7 with Timer 1 inverted channel 1 (TIM1_CH1N), ADC1 input 7 (ADC1_IN7), RTC alarm (RTC_ALARM), internal voltage reference output (VREFINT) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "25",+ "name": "PC0",+ "type": "bidirectional",+ "description": "Port C0 with I2C1 data (I2C1_SDA); 5 V tolerant I/O configured as true open-drain (no protection diode to VDD)."+ },+ {+ "number": "26",+ "name": "PC1",+ "type": "bidirectional",+ "description": "Port C1 with I2C1 clock (I2C1_SCL); 5 V tolerant I/O configured as true open-drain (no protection diode to VDD)."+ },+ {+ "number": "27",+ "name": "PC2",+ "type": "bidirectional",+ "description": "Port C2 with USART1 receive (USART1_RX), ADC1 input 6 (ADC1_IN6), comparator 1 positive input (COMP1_INP) and internal voltage reference output (VREFINT); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "28",+ "name": "PC3",+ "type": "bidirectional",+ "description": "Port C3 with USART1 transmit (USART1_TX), ADC1 input 5 (ADC1_IN5), comparator 1 positive input (COMP1_INP) and comparator 2 negative input (COMP2_INM); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "29",+ "name": "PC4",+ "type": "bidirectional",+ "description": "Port C4 with USART1 synchronous clock (USART1_CK), I2C1_SMB, configurable clock output (CCO), ADC1 input 4 (ADC1_IN4), comparator 2 negative input (COMP2_INM) and comparator 1 positive input (COMP1_INP); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "30",+ "name": "PC5",+ "type": "bidirectional",+ "description": "Port C5 with LSE oscillator input (OSC32_IN), SPI1 master/slave select (SPI1_NSS, remap) and USART1 transmit (USART1_TX, remap); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "31",+ "name": "PC6",+ "type": "bidirectional",+ "description": "Port C6 with LSE oscillator output (OSC32_OUT), SPI1 clock (SPI1_SCK, remap) and USART1 receive (USART1_RX, remap); 3.6 V tolerant I/O with high sink/source (20 mA) capability."+ },+ {+ "number": "32",+ "name": "PA0",+ "type": "bidirectional",+ "description": "Port A0 with USART1 synchronous clock (USART1_CK, remap), SWIM input and output, beep output (BEEP) and infrared timer output (IR_TIM); high sink LED driver capability, and the pin is in input pull-up during reset and after reset release."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package mapping: MPN STM8L151K6T3 decodes as 32-pin (K), 32 KB Flash (6), LQFP (T), -40 to 125 °C (3; Pin 9 is PD0 on STM8L151xx devices per Table 5 (footnote 8). On STM8L152xx the same pin is VLCD (LCD; LCD segment/common functions (LCD_SEG, LCD_COM, VLCD) are listed in Table 5 but are available only o"+ ],+ "pages_sent": 56,+ "cost_usd": 0.2571,+ "at": "2026-10-08T11:48:37"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922459260772352",+ "pages": 141,+ "sha256": "76f669f0972e887a",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 32,+ "described": 32,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm8l151k6t3.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "be0e412f1c66fee70039b0e109e0cc7c823161dda97593718afa97569bc61ce3",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm8l151k6t3-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d65f4d8c03e33541905a62bc6aafc3988e29b12c84d8f4063710815e31e1274e",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}