stm8l151c6t6

@@ -32,5 +32,319 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "STM8L151C6T6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://www.st.com/resource/en/datasheet/stm8l151c6t6.pdf",+    "parts": {+      "symbol": "stm8l151c6t6.kicad_sym",+      "footprint": "stm8l151c6t6.kicad_mod",+      "model_3d": "stm8l151c6t6-etched.glb",+      "model_3d_plain": "stm8l151c6t6.glb",+      "model_3d_step": "stm8l151c6t6-etched.step",+      "model_3d_step_plain": "stm8l151c6t6.step",+      "lbr": "stm8l151c6t6.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "PA0/USART1_CK/SWIM/BEEP/IR_TIM",+        "type": "bidirectional",+        "description": "Port A0 GPIO. Alternate functions: SWIM debug/program I/O (default at reset), [USART1 synchronous clock] (remap), BEEP output, and Infrared timer output. High-sink LED driver capability. Pull-up during reset and after reset release."+      },+      {+        "number": "2",+        "name": "NRST/PA1",+        "type": "bidirectional",+        "description": "Active-low reset input with internal pull-up at power-up. May be reconfigured as general-purpose PA1 (output push-pull or open-drain only; cannot be used as general-purpose input). See RM0031 for reconfiguration procedure."+      },+      {+        "number": "3",+        "name": "PA2/OSC_IN/[USART1_TX]/[SPI1_MISO]",+        "type": "bidirectional",+        "description": "Port A2 GPIO / HSE crystal oscillator input (1-16 MHz). Remappable alternates: USART1 TX or SPI1 MISO."+      },+      {+        "number": "4",+        "name": "PA3/OSC_OUT/[USART1_RX]/[SPI1_MOSI]",+        "type": "bidirectional",+        "description": "Port A3 GPIO / HSE crystal oscillator output. Remappable alternates: USART1 RX or SPI1 MOSI."+      },+      {+        "number": "5",+        "name": "PA4/TIM2_BKIN/ADC1_IN2/COMP1_INP",+        "type": "bidirectional",+        "description": "Port A4 GPIO. Alternates: TIM2 break input, ADC1 channel 2 analog input, comparator 1 positive input. 3.6 V tolerant (TT) I/O (protection diode to VDD not implemented)."+      },+      {+        "number": "6",+        "name": "PA5/TIM3_BKIN/ADC1_IN1/COMP1_INP",+        "type": "bidirectional",+        "description": "Port A5 GPIO. Alternates: TIM3 break input, ADC1 channel 1 analog input, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "7",+        "name": "PA6/[ADC1_TRIG]/ADC1_IN0/COMP1_INP",+        "type": "bidirectional",+        "description": "Port A6 GPIO. Alternates: remappable ADC1 external trigger, ADC1 channel 0 analog input, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "8",+        "name": "PA7",+        "type": "bidirectional",+        "description": "Port A7 GPIO. Five-volt tolerant (FT) I/O."+      },+      {+        "number": "9",+        "name": "VSS1/VSSA/VREF-",+        "type": "power_in",+        "description": "Combined digital I/O ground, analog ground, and ADC1 negative voltage reference. Connect to 0 V system ground."+      },+      {+        "number": "10",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply. Operating range 1.8 V to 3.6 V (down to 1.65 V at power down). Decouple with 100 nF at pin."+      },+      {+        "number": "11",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply voltage for ADC, DAC, comparators, and internal reference. Tie to VDD via a small ferrite or star-connect at the LDO for best analog performance."+      },+      {+        "number": "12",+        "name": "VREF+",+        "type": "power_in",+        "description": "ADC1 and DAC positive voltage reference input. Tie to VDDA when not using an external reference; must be <= VDDA."+      },+      {+        "number": "13",+        "name": "Reserved",+        "type": "unconnected",+        "description": "Reserved on STM8L151xx (without LCD). Must be tied to VDD. On STM8L152xx this pin is VLCD (LCD booster external capacitor)."+      },+      {+        "number": "14",+        "name": "PE0",+        "type": "bidirectional",+        "description": "Port E0 GPIO. Five-volt tolerant (FT) I/O."+      },+      {+        "number": "15",+        "name": "PE1/TIM1_CH2N",+        "type": "bidirectional",+        "description": "Port E1 GPIO. Alternate: TIM1 inverted channel 2 output (complementary PWM). 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "16",+        "name": "PE2/TIM1_CH3N",+        "type": "bidirectional",+        "description": "Port E2 GPIO. Alternate: TIM1 inverted channel 3 output (complementary PWM). 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "17",+        "name": "PE3",+        "type": "bidirectional",+        "description": "Port E3 GPIO. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "18",+        "name": "PE4",+        "type": "bidirectional",+        "description": "Port E4 GPIO. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "19",+        "name": "PE5/ADC1_IN23/COMP2_INP/COMP1_INP",+        "type": "bidirectional",+        "description": "Port E5 GPIO. Alternates: ADC1 channel 23 analog input, comparator 2 positive input, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "20",+        "name": "PD0/TIM3_CH2/[ADC1_TRIG]/ADC1_IN22/COMP2_INP/COMP1_INP",+        "type": "bidirectional",+        "description": "Port D0 GPIO. Alternates: TIM3 channel 2, remappable ADC1 external trigger, ADC1 channel 22, comparator 2/1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "21",+        "name": "PD1/TIM3_ETR/ADC1_IN21/COMP2_INP/COMP1_INP",+        "type": "bidirectional",+        "description": "Port D1 GPIO. Alternates: TIM3 external trigger, ADC1 channel 21, comparator 2/1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "22",+        "name": "PD2/TIM1_CH1/ADC1_IN20/COMP1_INP",+        "type": "bidirectional",+        "description": "Port D2 GPIO. Alternates: TIM1 channel 1, ADC1 channel 20, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "23",+        "name": "PD3/TIM1_ETR/ADC1_IN19/COMP1_INP",+        "type": "bidirectional",+        "description": "Port D3 GPIO. Alternates: TIM1 external trigger, ADC1 channel 19, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "24",+        "name": "PB0/TIM2_CH1/ADC1_IN18/COMP1_INP",+        "type": "bidirectional",+        "description": "Port B0 GPIO. Alternates: TIM2 channel 1, ADC1 channel 18, comparator 1 positive input. 3.6 V tolerant (TT) I/O. Pull-up applied during reset phase; floats after reset release."+      },+      {+        "number": "25",+        "name": "PB1/TIM3_CH1/ADC1_IN17/COMP1_INP",+        "type": "bidirectional",+        "description": "Port B1 GPIO. Alternates: TIM3 channel 1, ADC1 channel 17, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "26",+        "name": "PB2/TIM2_CH2/ADC1_IN16/COMP1_INP",+        "type": "bidirectional",+        "description": "Port B2 GPIO. Alternates: TIM2 channel 2, ADC1 channel 16, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "27",+        "name": "PB3/TIM2_ETR/ADC1_IN15/COMP1_INP",+        "type": "bidirectional",+        "description": "Port B3 GPIO. Alternates: TIM2 external trigger, ADC1 channel 15, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "28",+        "name": "PB4/[SPI1_NSS]/ADC1_IN14/COMP1_INP",+        "type": "bidirectional",+        "description": "Port B4 GPIO. Alternates: remappable SPI1 slave-select (NSS), ADC1 channel 14, comparator 1 positive input. 3.6 V tolerant (TT) I/O. Pull-up during reset; floats after reset release."+      },+      {+        "number": "29",+        "name": "PB5/[SPI1_SCK]/ADC1_IN13/COMP1_INP",+        "type": "bidirectional",+        "description": "Port B5 GPIO. Alternates: remappable SPI1 clock, ADC1 channel 13, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "30",+        "name": "PB6/[SPI1_MOSI]/ADC1_IN12/COMP1_INP",+        "type": "bidirectional",+        "description": "Port B6 GPIO. Alternates: remappable SPI1 MOSI, ADC1 channel 12, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "31",+        "name": "PB7/[SPI1_MISO]/ADC1_IN11/COMP1_INP",+        "type": "bidirectional",+        "description": "Port B7 GPIO. Alternates: remappable SPI1 MISO, ADC1 channel 11, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "32",+        "name": "PF0/ADC1_IN24/DAC_OUT",+        "type": "bidirectional",+        "description": "Port F0 GPIO. Alternates: ADC1 channel 24 analog input, 12-bit DAC output (buffered). 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "33",+        "name": "PD4/TIM1_CH2/ADC1_IN10/COMP1_INP",+        "type": "bidirectional",+        "description": "Port D4 GPIO. Alternates: TIM1 channel 2, ADC1 channel 10, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "34",+        "name": "PD5/TIM1_CH3/ADC1_IN9/COMP1_INP",+        "type": "bidirectional",+        "description": "Port D5 GPIO. Alternates: TIM1 channel 3, ADC1 channel 9, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "35",+        "name": "PD6/TIM1_BKIN/ADC1_IN8/RTC_CALIB/VREFINT/COMP1_INP",+        "type": "bidirectional",+        "description": "Port D6 GPIO. Alternates: TIM1 break input, ADC1 channel 8, RTC calibration output, internal voltage reference output (VREFINT), comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "36",+        "name": "PD7/TIM1_CH1N/ADC1_IN7/RTC_ALARM/VREFINT/COMP1_INP",+        "type": "bidirectional",+        "description": "Port D7 GPIO. Alternates: TIM1 inverted channel 1, ADC1 channel 7, RTC alarm output, internal voltage reference output (VREFINT), comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "37",+        "name": "PC0/I2C1_SDA",+        "type": "bidirectional",+        "description": "Port C0 GPIO. Alternate: I2C1 data (SDA), true open-drain output. Five-volt tolerant (FT) I/O."+      },+      {+        "number": "38",+        "name": "PC1/I2C1_SCL",+        "type": "bidirectional",+        "description": "Port C1 GPIO. Alternate: I2C1 clock (SCL), true open-drain output. Five-volt tolerant (FT) I/O."+      },+      {+        "number": "39",+        "name": "VDD2",+        "type": "power_in",+        "description": "Second I/O supply pin. Tie to VDD (1.8 V to 3.6 V). Provides supply to a subset of I/O drivers on the LQFP48 package."+      },+      {+        "number": "40",+        "name": "VSS2",+        "type": "power_in",+        "description": "Second I/O ground pin. Tie to system 0 V."+      },+      {+        "number": "41",+        "name": "PC2/USART1_RX/ADC1_IN6/COMP1_INP/VREFINT",+        "type": "bidirectional",+        "description": "Port C2 GPIO. Alternates: USART1 receive, ADC1 channel 6 analog input, comparator 1 positive input, internal voltage reference output. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "42",+        "name": "PC3/USART1_TX/ADC1_IN5/COMP1_INP/COMP2_INM",+        "type": "bidirectional",+        "description": "Port C3 GPIO. Alternates: USART1 transmit, ADC1 channel 5 analog input, comparator 1 positive input, comparator 2 negative input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "43",+        "name": "PC4/USART1_CK/I2C1_SMB/CCO/ADC1_IN4/COMP2_INM/COMP1_INP",+        "type": "bidirectional",+        "description": "Port C4 GPIO. Alternates: USART1 synchronous clock, I2C1 SMBus alert, configurable clock output (CCO), ADC1 channel 4 analog input, comparator 2 negative input, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "44",+        "name": "PC5/OSC32_IN/[SPI1_NSS]/[USART1_TX]",+        "type": "bidirectional",+        "description": "Port C5 GPIO. Alternates: LSE 32 kHz crystal oscillator input, remappable SPI1 slave-select, remappable USART1 transmit."+      },+      {+        "number": "45",+        "name": "PC6/OSC32_OUT/[SPI1_SCK]/[USART1_RX]",+        "type": "bidirectional",+        "description": "Port C6 GPIO. Alternates: LSE 32 kHz crystal oscillator output, remappable SPI1 clock, remappable USART1 receive."+      },+      {+        "number": "46",+        "name": "PC7/ADC1_IN3/COMP2_INM/COMP1_INP",+        "type": "bidirectional",+        "description": "Port C7 GPIO. Alternates: ADC1 channel 3 analog input, comparator 2 negative input, comparator 1 positive input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "47",+        "name": "PE6/PVD_IN",+        "type": "bidirectional",+        "description": "Port E6 GPIO. Alternate: programmable voltage detector (PVD) external input. 3.6 V tolerant (TT) I/O."+      },+      {+        "number": "48",+        "name": "PE7",+        "type": "bidirectional",+        "description": "Port E7 GPIO. 3.6 V tolerant (TT) I/O."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}