component
STM811SW16F
Public Made by Adomby adom
STMicroelectronics Supervisor and Reset ICs, SOT-143. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+6−3@@ -44,13 +44,13 @@ "number": "3", "name": "MR", "type": "input",- "description": "Manual reset input, active low. A logic low asserts RST and keeps it asserted for trec after MR returns high. Internally pulled up to VCC via a 20 k\u03a9 resistor, so it may be left open if unused; a normally-open push-button to GND provides a manual reset. Optional 0.1 \u00b5F cap from MR to GND for noise immunity."+ "description": "Manual reset input, active low. A logic low asserts RST and keeps it asserted for trec after MR returns high. Internally pulled up to VCC via a 20 kΩ resistor, so it may be left open if unused; a normally-open push-button to GND provides a manual reset. Optional 0.1 µF cap from MR to GND for noise immunity." }, { "number": "4", "name": "VCC", "type": "power_in",- "description": "Monitored supply voltage input (typ. 3.0/3.3/5 V depending on threshold variant). A 0.1 \u00b5F bypass capacitor to VSS mounted close to this pin is recommended for transient immunity."+ "description": "Monitored supply voltage input (typ. 3.0/3.3/5 V depending on threshold variant). A 0.1 µF bypass capacitor to VSS mounted close to this pin is recommended for transient immunity." } ], "provenance": {@@ -114,5 +114,8 @@ "docs/stm811sw16f-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }