component
STM811SW16F
Public Made by Adomby adom
STMicroelectronics Supervisor and Reset ICs, SOT-143. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C124715). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+19−5
page.json+5−3@@ -26,7 +26,9 @@ "model_3d_step": "stm811sw16f.step", "lbr": "stm811sw16f.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C124715"+ }, "pins": [ { "number": "1",@@ -44,13 +46,13 @@ "number": "3", "name": "MR", "type": "input",- "description": "Manual reset input, active low. A logic low asserts RST and keeps it asserted for trec after MR returns high. Internally pulled up to VCC via a 20 kΩ resistor, so it may be left open if unused; a normally-open push-button to GND provides a manual reset. Optional 0.1 µF cap from MR to GND for noise immunity."+ "description": "Manual reset input, active low. A logic low asserts RST and keeps it asserted for trec after MR returns high. Internally pulled up to VCC via a 20 k\u03a9 resistor, so it may be left open if unused; a normally-open push-button to GND provides a manual reset. Optional 0.1 \u00b5F cap from MR to GND for noise immunity." }, { "number": "4", "name": "VCC", "type": "power_in",- "description": "Monitored supply voltage input (typ. 3.0/3.3/5 V depending on threshold variant). A 0.1 µF bypass capacitor to VSS mounted close to this pin is recommended for transient immunity."+ "description": "Monitored supply voltage input (typ. 3.0/3.3/5 V depending on threshold variant). A 0.1 \u00b5F bypass capacitor to VSS mounted close to this pin is recommended for transient immunity." } ], "provenance": {
stm811sw16f.lbr+14−2@@ -58,6 +58,12 @@ <smd name="2" x="-1.0000" y="-0.9500" dx="0.7000" dy="0.6000" layer="1"/> <smd name="3" x="1.0000" y="-0.9500" dx="0.7000" dy="0.6000" layer="1"/> <smd name="4" x="1.0000" y="0.9500" dx="0.7000" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.0000" y="1.5100"/>+ <vertex x="-1.2400" y="1.8400"/>+ <vertex x="-0.7600" y="1.8400"/>+ <vertex x="-1.0000" y="1.5100"/>+ </polygon> <wire x1="-0.6500" y1="-1.5600" x2="0.6500" y2="-1.5600" width="0.1200" layer="21"/> <wire x1="0.6500" y1="1.5600" x2="-0.6200" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.6500" y1="0.9500" x2="-0.1500" y2="1.4500" width="0.1000" layer="51"/>@@ -67,7 +73,7 @@ <wire x1="0.6500" y1="-1.4500" x2="-0.6500" y2="-1.4500" width="0.1000" layer="51"/> <text x="0" y="2.160" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.160" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.0000" y="1.5100"/><vertex x="-1.2400" y="1.8400"/><vertex x="-0.7600" y="1.8400"/><vertex x="-1.0000" y="1.5100"/></polygon></package>+</package> </packages> <symbols> <symbol name="STM811SW16F">@@ -97,7 +103,13 @@ <connect gate="G$1" pin="VCC" pad="4"/> <connect gate="G$1" pin="MR" pad="3"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="STM811SW16F" constant="no"/>+ <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>+ <attribute name="LCSC_PN" value="C124715" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>