component
STM810TWX6F
Public Made by Adomby adom
STMicroelectronics Supervisor and Reset ICs, SOT-23-3. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+6−3@@ -38,13 +38,13 @@ "number": "2", "name": "RST", "type": "output",- "description": "Active-high push-pull reset output (STM810). Driven high while VCC is below the reset threshold (VRST) and held high for the reset time-out period trec (140 ms min) after VCC recovers. Both source and sink capability; guaranteed valid down to VCC = 1.0 V. A 100 k\u03a9 pull-up to VCC is recommended if the RST signal must remain valid for VCC < 1.0 V."+ "description": "Active-high push-pull reset output (STM810). Driven high while VCC is below the reset threshold (VRST) and held high for the reset time-out period trec (140 ms min) after VCC recovers. Both source and sink capability; guaranteed valid down to VCC = 1.0 V. A 100 kΩ pull-up to VCC is recommended if the RST signal must remain valid for VCC < 1.0 V." }, { "number": "3", "name": "VCC", "type": "power_in",- "description": "Positive supply input and monitored voltage. Operating range up to 5.5 V (absolute max 7 V). A 0.1 \u00b5F bypass capacitor mounted as close as possible to this pin is recommended for transient immunity. The internal comparator trips RST when VCC falls below the factory-set VRST threshold (T suffix = ~3.08 V nominal for 3.3 V systems)."+ "description": "Positive supply input and monitored voltage. Operating range up to 5.5 V (absolute max 7 V). A 0.1 µF bypass capacitor mounted as close as possible to this pin is recommended for transient immunity. The internal comparator trips RST when VCC falls below the factory-set VRST threshold (T suffix = ~3.08 V nominal for 3.3 V systems)." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/stm810twx6f-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }