← Commit history
README.mdadded+136@@ -0,0 +1,136 @@+# STM32L476VET6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32L476VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TRACECK, TIM3_ETR, TSC_G7_IO1, LCD_SEG38, FMC_A23, SAI1_MCLK_A, EVENTOUT. |+| 2 | PE3 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TRACED0, TIM3_CH1, TSC_G7_IO2, LCD_SEG39, FMC_A19, SAI1_SD_B, EVENTOUT. |+| 3 | PE4 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TRACED1, TIM3_CH2, DFSDM1_DATIN3, TSC_G7_IO3, FMC_A20, SAI1_FS_A, EVENTOUT. |+| 4 | PE5 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TRACED2, TIM3_CH3, DFSDM1_CKIN3, TSC_G7_IO4, FMC_A21, SAI1_SCK_A, EVENTOUT. |+| 5 | PE6 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TRACED3, TIM3_CH4, FMC_A22, SAI1_SD_A, EVENTOUT and additional RTC_TAMP3/WKUP3 function. |+| 6 | VBAT | power_in | Backup battery supply for RTC and 32x32-bit backup registers, operating range 1.55 V to 3.6 V (Table 23). |+| 7 | PC13 | bidirectional | 5V-tolerant GPIO (FT) supplied through the RTC power switch (max 3 mA sink, 2 MHz/30 pF in output mode, notes 1&2); alternate EVENTOUT, additional RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |+| 8 | PC14-OSC32_IN | bidirectional | 5V-tolerant GPIO (FT) supplied through the RTC power switch (notes 1&2), default OSC32_IN function for the 32.768 kHz LSE crystal oscillator input; alternate EVENTOUT. |+| 9 | PC15-OSC32_OUT | bidirectional | 5V-tolerant GPIO (FT) supplied through the RTC power switch (notes 1&2), default OSC32_OUT function for the 32.768 kHz LSE crystal oscillator output; alternate EVENTOUT. |+| 10 | VSS | power_in | Digital ground supply pin. |+| 11 | VDD | power_in | Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23). |+| 12 | PH0-OSC_IN | bidirectional | 5V-tolerant GPIO (FT), default OSC_IN function for the 4-48 MHz HSE crystal/external clock input; alternate EVENTOUT. |+| 13 | PH1-OSC_OUT | bidirectional | 5V-tolerant GPIO (FT), default OSC_OUT function for the HSE crystal oscillator output; alternate EVENTOUT. |+| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (RST I/O structure); driving low resets the device. |+| 15 | PC0 | bidirectional | 5V-tolerant GPIO (FT_fla) with alternate functions LPTIM1_IN1, I2C3_SCL, DFSDM1_DATIN4, LPUART1_RX, LCD_SEG18, LPTIM2_IN1, EVENTOUT and additional ADC123_IN1. |+| 16 | PC1 | bidirectional | 5V-tolerant GPIO (FT_fla) with alternate functions LPTIM1_OUT, I2C3_SDA, DFSDM1_CKIN4, LPUART1_TX, LCD_SEG19, EVENTOUT and additional ADC123_IN2. |+| 17 | PC2 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, LCD_SEG20, EVENTOUT and additional ADC123_IN3. |+| 18 | PC3 | bidirectional | 5V-tolerant GPIO (FT_a) with alternate functions LPTIM1_ETR, SPI2_MOSI, LCD_VLCD, SAI1_SD_A, LPTIM2_ETR, EVENTOUT and additional ADC123_IN4. |+| 19 | VSSA | power_in | Analog ground supply pin (must be connected to external supply per note 5, includes VREF- reference). |+| 20 | VREF- | power_in | Negative reference voltage supply for ADC/DAC, referenced to VSSA (Table 76). |+| 21 | VREF+ | power_in | Positive reference voltage input for ADC/DAC (2 V to VDDA per Table 76); also output of internal reference buffer, additional function VREFBUF_OUT. |+| 22 | VDDA | power_in | Analog power supply pin, range 1.62 V to 3.6 V depending on which analog peripheral (ADC/COMP/DAC/OPAMP/VREFBUF) is used (Table 23). |+| 23 | PA0 | bidirectional | 5V-tolerant GPIO (FT_a) with alternate functions TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI1_EXTCLK, TIM2_ETR, EVENTOUT and additional OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1. |+| 24 | PA1 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS_DE, UART4_RX, LCD_SEG0, TIM15_CH1N, EVENTOUT and additional OPAMP1_VINM, ADC12_IN6. |+| 25 | PA2 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions TIM2_CH3, TIM5_CH3, USART2_TX, LCD_SEG1, SAI2_EXTCLK, TIM15_CH1, EVENTOUT and additional ADC12_IN7, WKUP4/LSCO. |+| 26 | PA3 | bidirectional | 3.6V-tolerant GPIO (TT_la) with alternate functions TIM2_CH4, TIM5_CH4, USART2_RX, LCD_SEG2, TIM15_CH2, EVENTOUT and additional OPAMP1_VOUT, ADC12_IN8. |+| 27 | VSS | power_in | Digital ground supply pin. |+| 28 | VDD | power_in | Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23). |+| 29 | PA4 | bidirectional | 3.6V-tolerant GPIO (TT_a) with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B, LPTIM2_OUT, EVENTOUT and additional ADC12_IN9, DAC1_OUT1. |+| 30 | PA5 | bidirectional | 3.6V-tolerant GPIO (TT_a) with alternate functions TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, LPTIM2_ETR, EVENTOUT and additional ADC12_IN10, DAC1_OUT2. |+| 31 | PA6 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, USART3_CTS, QUADSPI_BK1_IO3, LCD_SEG3, TIM1_BKIN_COMP2, TIM8_BKIN_COMP2, TIM16_CH1, EVENTOUT and additional OPAMP2_VINP, ADC12_IN11. |+| 32 | PA7 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, QUADSPI_BK1_IO2, LCD_SEG4, TIM17_CH1, EVENTOUT and additional OPAMP2_VINM, ADC12_IN12. |+| 33 | PC4 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions USART3_TX, LCD_SEG22, EVENTOUT and additional COMP1_INM, ADC12_IN13. |+| 34 | PC5 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions USART3_RX, LCD_SEG23, EVENTOUT and additional COMP1_INP, ADC12_IN14, WKUP5. |+| 35 | PB0 | bidirectional | 3.6V-tolerant GPIO (TT_la) with alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, USART3_CK, QUADSPI_BK1_IO1, LCD_SEG5, COMP1_OUT, EVENTOUT and additional OPAMP2_VOUT, ADC12_IN15. |+| 36 | PB1 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS_DE, QUADSPI_BK1_IO0, LCD_SEG6, LPTIM2_IN1, EVENTOUT and additional COMP1_INM, ADC12_IN16. |+| 37 | PB2 | bidirectional | 5V-tolerant GPIO (FT_a) with alternate functions RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0, EVENTOUT and additional COMP1_INP. |+| 38 | PE7 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_ETR, DFSDM1_DATIN2, FMC_D4, SAI1_SD_B, EVENTOUT. |+| 39 | PE8 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_CH1N, DFSDM1_CKIN2, FMC_D5, SAI1_SCK_B, EVENTOUT. |+| 40 | PE9 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_CH1, DFSDM1_CKOUT, FMC_D6, SAI1_FS_B, EVENTOUT. |+| 41 | PE10 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, QUADSPI_CLK, FMC_D7, SAI1_MCLK_B, EVENTOUT. |+| 42 | PE11 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, QUADSPI_NCS, FMC_D8, EVENTOUT. |+| 43 | PE12 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3, QUADSPI_BK1_IO0, FMC_D9, EVENTOUT. |+| 44 | PE13 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4, QUADSPI_BK1_IO1, FMC_D10, EVENTOUT. |+| 45 | PE14 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_CH4, TIM1_BKIN2, TIM1_BKIN2_COMP2, SPI1_MISO, QUADSPI_BK1_IO2, FMC_D11, EVENTOUT. |+| 46 | PE15 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions TIM1_BKIN, TIM1_BKIN_COMP1, SPI1_MOSI, QUADSPI_BK1_IO3, FMC_D12, EVENTOUT. |+| 47 | PB10 | bidirectional | 5V-tolerant GPIO (FT_fl) with alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK, DFSDM1_DATIN7, USART3_TX, LPUART1_RX, QUADSPI_CLK, LCD_SEG10, COMP1_OUT, SAI1_SCK_A, EVENTOUT. |+| 48 | PB11 | bidirectional | 5V-tolerant GPIO (FT_fl) with alternate functions TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, LPUART1_TX, QUADSPI_NCS, LCD_SEG11, COMP2_OUT, EVENTOUT. |+| 49 | VSS | power_in | Digital ground supply pin. |+| 50 | VDD | power_in | Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23). |+| 51 | PB12 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM1_BKIN, TIM1_BKIN_COMP2, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS_DE, TSC_G1_IO1, LCD_SEG12, SWPMI1_IO, SAI2_FS_A, TIM15_BKIN, EVENTOUT. |+| 52 | PB13 | bidirectional | 5V-tolerant GPIO (FT_fl) with alternate functions TIM1_CH1N, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS, LPUART1_CTS, TSC_G1_IO2, LCD_SEG13, SWPMI1_TX, SAI2_SCK_A, TIM15_CH1N, EVENTOUT. |+| 53 | PB14 | bidirectional | 5V-tolerant GPIO (FT_fl) with alternate functions TIM1_CH2N, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS_DE, TSC_G1_IO3, LCD_SEG14, SWPMI1_RX, SAI2_MCLK_A, TIM15_CH1, EVENTOUT. |+| 54 | PB15 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, TSC_G1_IO4, LCD_SEG15, SWPMI1_SUSPEND, SAI2_SD_A, TIM15_CH2, EVENTOUT. |+| 55 | PD8 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions USART3_TX, LCD_SEG28, FMC_D13, EVENTOUT. |+| 56 | PD9 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions USART3_RX, LCD_SEG29, FMC_D14, SAI2_MCLK_A, EVENTOUT. |+| 57 | PD10 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions USART3_CK, TSC_G6_IO1, LCD_SEG30, FMC_D15, SAI2_SCK_A, EVENTOUT. |+| 58 | PD11 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions USART3_CTS, TSC_G6_IO2, LCD_SEG31, FMC_A16, SAI2_SD_A, LPTIM2_ETR, EVENTOUT. |+| 59 | PD12 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM4_CH1, USART3_RTS_DE, TSC_G6_IO3, LCD_SEG32, FMC_A17, SAI2_FS_A, LPTIM2_IN1, EVENTOUT. |+| 60 | PD13 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM4_CH2, TSC_G6_IO4, LCD_SEG33, FMC_A18, LPTIM2_OUT, EVENTOUT. |+| 61 | PD14 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM4_CH3, LCD_SEG34, FMC_D0, EVENTOUT. |+| 62 | PD15 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM4_CH4, LCD_SEG35, FMC_D1, EVENTOUT. |+| 63 | PC6 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, LCD_SEG24, SDMMC1_D6, SAI2_MCLK_A, EVENTOUT. |+| 64 | PC7 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, LCD_SEG25, SDMMC1_D7, SAI2_MCLK_B, EVENTOUT. |+| 65 | PC8 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM3_CH3, TIM8_CH3, TSC_G4_IO3, LCD_SEG26, SDMMC1_D0, EVENTOUT. |+| 66 | PC9 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM8_BKIN2, TIM3_CH4, TIM8_CH4, TSC_G4_IO4, OTG_FS_NOE, LCD_SEG27, SDMMC1_D1, SAI2_EXTCLK, TIM8_BKIN2_COMP1, EVENTOUT. |+| 67 | PA8 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions MCO, TIM1_CH1, USART1_CK, OTG_FS_SOF, LCD_COM0, LPTIM2_OUT, EVENTOUT. |+| 68 | PA9 | bidirectional | 5V-tolerant GPIO with USB support (FT_lu) with alternate functions TIM1_CH2, USART1_TX, LCD_COM1, TIM15_BKIN, EVENTOUT and additional OTG_FS_VBUS. |+| 69 | PA10 | bidirectional | 5V-tolerant GPIO with USB support (FT_lu) with alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, LCD_COM2, TIM17_BKIN, EVENTOUT. |+| 70 | PA11 | bidirectional | 5V-tolerant GPIO with USB support (FT_u) with alternate functions TIM1_CH4, TIM1_BKIN2, USART1_CTS, CAN1_RX, OTG_FS_DM, TIM1_BKIN2_COMP1, EVENTOUT. |+| 71 | PA12 | bidirectional | 5V-tolerant GPIO with USB support (FT_u) with alternate functions TIM1_ETR, USART1_RTS_DE, CAN1_TX, OTG_FS_DP, EVENTOUT. |+| 72 | PA13 (JTMS-SWDIO) | bidirectional | 5V-tolerant GPIO (FT) configured after reset as JTMS-SWDIO debug alternate function with internal pull-up active (note 4); other alt functions IR_OUT, OTG_FS_NOE, EVENTOUT. |+| 73 | VDDUSB | power_in | USB transceiver supply voltage, 3.0 V to 3.6 V when USB is used, 0 to 3.6 V otherwise (Table 23). |+| 74 | VSS | power_in | Digital ground supply pin. |+| 75 | VDD | power_in | Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23). |+| 76 | PA14 (JTCK-SWCLK) | bidirectional | 5V-tolerant GPIO (FT) configured after reset as JTCK-SWCLK debug alternate function with internal pull-down active (note 4); alternate EVENTOUT. |+| 77 | PA15 (JTDI) | bidirectional | 5V-tolerant GPIO (FT_l) configured after reset as JTDI debug alternate function with internal pull-up active (note 4); other alt functions TIM2_CH1, TIM2_ETR, SPI1_NSS, SPI3_NSS, UART4_RTS_DE, TSC_G3_IO1, LCD_SEG17, SAI2_FS_B, EVENTOUT. |+| 78 | PC10 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, LCD_COM4/LCD_SEG28/LCD_SEG40, SDMMC1_D2, SAI2_SCK_B, EVENTOUT. |+| 79 | PC11 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions SPI3_MISO, USART3_RX, UART4_RX, TSC_G3_IO3, LCD_COM5/LCD_SEG29/LCD_SEG41, SDMMC1_D3, SAI2_MCLK_B, EVENTOUT. |+| 80 | PC12 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, LCD_COM6/LCD_SEG30/LCD_SEG42, SDMMC1_CK, SAI2_SD_B, EVENTOUT. |+| 81 | PD0 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, FMC_D2, EVENTOUT. |+| 82 | PD1 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, FMC_D3, EVENTOUT. |+| 83 | PD2 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, LCD_COM7/LCD_SEG31/LCD_SEG43, SDMMC1_CMD, EVENTOUT. |+| 84 | PD3 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions SPI2_MISO, DFSDM1_DATIN0, USART2_CTS, FMC_CLK, EVENTOUT. |+| 85 | PD4 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, FMC_NOE, EVENTOUT. |+| 86 | PD5 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions USART2_TX, FMC_NWE, EVENTOUT. |+| 87 | PD6 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions DFSDM1_DATIN1, USART2_RX, FMC_NWAIT, SAI1_SD_A, EVENTOUT. |+| 88 | PD7 | bidirectional | 5V-tolerant GPIO (FT) with alternate functions DFSDM1_CKIN1, USART2_CK, FMC_NE1, EVENTOUT. |+| 89 | PB3 (JTDO-TRACESWO) | bidirectional | 5V-tolerant GPIO (FT_la) configured after reset as JTDO-TRACESWO debug alternate function with internal pull-up active (note 4); other alt functions TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, LCD_SEG7, SAI1_SCK_B, EVENTOUT, additional COMP2_INM. |+| 90 | PB4 (NJTRST) | bidirectional | 5V-tolerant GPIO (FT_la) configured after reset as NJTRST debug alternate function with internal pull-up active (note 4); other alt functions TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, UART5_RTS_DE, TSC_G2_IO1, LCD_SEG8, SAI1_MCLK_B, TIM17_BKIN, EVENTOUT, additional COMP2_INP. |+| 91 | PB5 | bidirectional | 5V-tolerant GPIO (FT_la) with alternate functions LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS, TSC_G2_IO2, LCD_SEG9, COMP2_OUT, SAI1_SD_B, TIM16_BKIN, EVENTOUT. |+| 92 | PB6 | bidirectional | 5V-tolerant GPIO (FT_fa) with alternate functions LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, TSC_G2_IO3, TIM8_BKIN2_COMP2, SAI1_FS_B, TIM16_CH1N, EVENTOUT and additional COMP2_INP. |+| 93 | PB7 | bidirectional | 5V-tolerant GPIO (FT_fla) with alternate functions LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, UART4_CTS, TSC_G2_IO4, LCD_SEG21, FMC_NL, TIM8_BKIN_COMP1, TIM17_CH1N, EVENTOUT and additional COMP2_INM, PVD_IN. |+| 94 | BOOT0 | input | Dedicated boot mode selection input pin (type B); level sampled at reset selects boot from Flash, system memory or SRAM, accepts input voltage up to 9 V (Table 20). |+| 95 | PB8 | bidirectional | 5V-tolerant GPIO (FT_fl) with alternate functions TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, LCD_SEG16, SDMMC1_D4, SAI1_MCLK_A, TIM16_CH1, EVENTOUT. |+| 96 | PB9 | bidirectional | 5V-tolerant GPIO (FT_fl) with alternate functions IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, DFSDM1_CKIN6, CAN1_TX, LCD_COM3, SDMMC1_D5, SAI1_FS_A, TIM17_CH1, EVENTOUT. |+| 97 | PE0 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions TIM4_ETR, LCD_SEG36, FMC_NBL0, TIM16_CH1, EVENTOUT. |+| 98 | PE1 | bidirectional | 5V-tolerant GPIO (FT_l) with alternate functions LCD_SEG37, FMC_NBL1, TIM17_CH1, EVENTOUT. |+| 99 | VSS | power_in | Digital ground supply pin. |+| 100 | VDD | power_in | Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32L476VET6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32l476vet6-etched.step` / `stm32l476vet6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l476vet6.step` / `stm32l476vet6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893294750916608) (270 pp, sha256 `241f8f908b7f839d`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32l476vet6-datasheet.pdf)
page.jsonadded+696@@ -0,0 +1,696 @@+{+ "slug": "stm32l476vet6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32l476vet6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32l476vet6.kicad_sym",+ "stm32l476vet6.kicad_mod",+ "stm32l476vet6.glb",+ "stm32l476vet6.step",+ "stm32l476vet6.lbr",+ "docs/hero.png",+ "docs/stm32l476vet6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32L476VET6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-100(14x14)",+ "pin_count": 100,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893294750916608",+ "parts": {+ "symbol": "stm32l476vet6.kicad_sym",+ "footprint": "stm32l476vet6.kicad_mod",+ "model_3d": "stm32l476vet6-etched.glb",+ "model_3d_plain": "stm32l476vet6.glb",+ "model_3d_step": "stm32l476vet6-etched.step",+ "model_3d_step_plain": "stm32l476vet6.step",+ "lbr": "stm32l476vet6.lbr"+ },+ "distributor_links": {+ "lcsc": "C882089"+ },+ "pins": [+ {+ "number": "1",+ "name": "PE2",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TRACECK, TIM3_ETR, TSC_G7_IO1, LCD_SEG38, FMC_A23, SAI1_MCLK_A, EVENTOUT."+ },+ {+ "number": "2",+ "name": "PE3",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TRACED0, TIM3_CH1, TSC_G7_IO2, LCD_SEG39, FMC_A19, SAI1_SD_B, EVENTOUT."+ },+ {+ "number": "3",+ "name": "PE4",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TRACED1, TIM3_CH2, DFSDM1_DATIN3, TSC_G7_IO3, FMC_A20, SAI1_FS_A, EVENTOUT."+ },+ {+ "number": "4",+ "name": "PE5",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TRACED2, TIM3_CH3, DFSDM1_CKIN3, TSC_G7_IO4, FMC_A21, SAI1_SCK_A, EVENTOUT."+ },+ {+ "number": "5",+ "name": "PE6",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TRACED3, TIM3_CH4, FMC_A22, SAI1_SD_A, EVENTOUT and additional RTC_TAMP3/WKUP3 function."+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery supply for RTC and 32x32-bit backup registers, operating range 1.55 V to 3.6 V (Table 23)."+ },+ {+ "number": "7",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) supplied through the RTC power switch (max 3 mA sink, 2 MHz/30 pF in output mode, notes 1&2); alternate EVENTOUT, additional RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2."+ },+ {+ "number": "8",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) supplied through the RTC power switch (notes 1&2), default OSC32_IN function for the 32.768 kHz LSE crystal oscillator input; alternate EVENTOUT."+ },+ {+ "number": "9",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) supplied through the RTC power switch (notes 1&2), default OSC32_OUT function for the 32.768 kHz LSE crystal oscillator output; alternate EVENTOUT."+ },+ {+ "number": "10",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin."+ },+ {+ "number": "11",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23)."+ },+ {+ "number": "12",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT), default OSC_IN function for the 4-48 MHz HSE crystal/external clock input; alternate EVENTOUT."+ },+ {+ "number": "13",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT), default OSC_OUT function for the HSE crystal oscillator output; alternate EVENTOUT."+ },+ {+ "number": "14",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up resistor (RST I/O structure); driving low resets the device."+ },+ {+ "number": "15",+ "name": "PC0",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fla) with alternate functions LPTIM1_IN1, I2C3_SCL, DFSDM1_DATIN4, LPUART1_RX, LCD_SEG18, LPTIM2_IN1, EVENTOUT and additional ADC123_IN1."+ },+ {+ "number": "16",+ "name": "PC1",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fla) with alternate functions LPTIM1_OUT, I2C3_SDA, DFSDM1_CKIN4, LPUART1_TX, LCD_SEG19, EVENTOUT and additional ADC123_IN2."+ },+ {+ "number": "17",+ "name": "PC2",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, LCD_SEG20, EVENTOUT and additional ADC123_IN3."+ },+ {+ "number": "18",+ "name": "PC3",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_a) with alternate functions LPTIM1_ETR, SPI2_MOSI, LCD_VLCD, SAI1_SD_A, LPTIM2_ETR, EVENTOUT and additional ADC123_IN4."+ },+ {+ "number": "19",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground supply pin (must be connected to external supply per note 5, includes VREF- reference)."+ },+ {+ "number": "20",+ "name": "VREF-",+ "type": "power_in",+ "description": "Negative reference voltage supply for ADC/DAC, referenced to VSSA (Table 76)."+ },+ {+ "number": "21",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive reference voltage input for ADC/DAC (2 V to VDDA per Table 76); also output of internal reference buffer, additional function VREFBUF_OUT."+ },+ {+ "number": "22",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply pin, range 1.62 V to 3.6 V depending on which analog peripheral (ADC/COMP/DAC/OPAMP/VREFBUF) is used (Table 23)."+ },+ {+ "number": "23",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_a) with alternate functions TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI1_EXTCLK, TIM2_ETR, EVENTOUT and additional OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1."+ },+ {+ "number": "24",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS_DE, UART4_RX, LCD_SEG0, TIM15_CH1N, EVENTOUT and additional OPAMP1_VINM, ADC12_IN6."+ },+ {+ "number": "25",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions TIM2_CH3, TIM5_CH3, USART2_TX, LCD_SEG1, SAI2_EXTCLK, TIM15_CH1, EVENTOUT and additional ADC12_IN7, WKUP4/LSCO."+ },+ {+ "number": "26",+ "name": "PA3",+ "type": "bidirectional",+ "description": "3.6V-tolerant GPIO (TT_la) with alternate functions TIM2_CH4, TIM5_CH4, USART2_RX, LCD_SEG2, TIM15_CH2, EVENTOUT and additional OPAMP1_VOUT, ADC12_IN8."+ },+ {+ "number": "27",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin."+ },+ {+ "number": "28",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23)."+ },+ {+ "number": "29",+ "name": "PA4",+ "type": "bidirectional",+ "description": "3.6V-tolerant GPIO (TT_a) with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B, LPTIM2_OUT, EVENTOUT and additional ADC12_IN9, DAC1_OUT1."+ },+ {+ "number": "30",+ "name": "PA5",+ "type": "bidirectional",+ "description": "3.6V-tolerant GPIO (TT_a) with alternate functions TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, LPTIM2_ETR, EVENTOUT and additional ADC12_IN10, DAC1_OUT2."+ },+ {+ "number": "31",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, USART3_CTS, QUADSPI_BK1_IO3, LCD_SEG3, TIM1_BKIN_COMP2, TIM8_BKIN_COMP2, TIM16_CH1, EVENTOUT and additional OPAMP2_VINP, ADC12_IN11."+ },+ {+ "number": "32",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, QUADSPI_BK1_IO2, LCD_SEG4, TIM17_CH1, EVENTOUT and additional OPAMP2_VINM, ADC12_IN12."+ },+ {+ "number": "33",+ "name": "PC4",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions USART3_TX, LCD_SEG22, EVENTOUT and additional COMP1_INM, ADC12_IN13."+ },+ {+ "number": "34",+ "name": "PC5",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions USART3_RX, LCD_SEG23, EVENTOUT and additional COMP1_INP, ADC12_IN14, WKUP5."+ },+ {+ "number": "35",+ "name": "PB0",+ "type": "bidirectional",+ "description": "3.6V-tolerant GPIO (TT_la) with alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, USART3_CK, QUADSPI_BK1_IO1, LCD_SEG5, COMP1_OUT, EVENTOUT and additional OPAMP2_VOUT, ADC12_IN15."+ },+ {+ "number": "36",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS_DE, QUADSPI_BK1_IO0, LCD_SEG6, LPTIM2_IN1, EVENTOUT and additional COMP1_INM, ADC12_IN16."+ },+ {+ "number": "37",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_a) with alternate functions RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0, EVENTOUT and additional COMP1_INP."+ },+ {+ "number": "38",+ "name": "PE7",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_ETR, DFSDM1_DATIN2, FMC_D4, SAI1_SD_B, EVENTOUT."+ },+ {+ "number": "39",+ "name": "PE8",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_CH1N, DFSDM1_CKIN2, FMC_D5, SAI1_SCK_B, EVENTOUT."+ },+ {+ "number": "40",+ "name": "PE9",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_CH1, DFSDM1_CKOUT, FMC_D6, SAI1_FS_B, EVENTOUT."+ },+ {+ "number": "41",+ "name": "PE10",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, QUADSPI_CLK, FMC_D7, SAI1_MCLK_B, EVENTOUT."+ },+ {+ "number": "42",+ "name": "PE11",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, QUADSPI_NCS, FMC_D8, EVENTOUT."+ },+ {+ "number": "43",+ "name": "PE12",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3, QUADSPI_BK1_IO0, FMC_D9, EVENTOUT."+ },+ {+ "number": "44",+ "name": "PE13",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4, QUADSPI_BK1_IO1, FMC_D10, EVENTOUT."+ },+ {+ "number": "45",+ "name": "PE14",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_CH4, TIM1_BKIN2, TIM1_BKIN2_COMP2, SPI1_MISO, QUADSPI_BK1_IO2, FMC_D11, EVENTOUT."+ },+ {+ "number": "46",+ "name": "PE15",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions TIM1_BKIN, TIM1_BKIN_COMP1, SPI1_MOSI, QUADSPI_BK1_IO3, FMC_D12, EVENTOUT."+ },+ {+ "number": "47",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fl) with alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK, DFSDM1_DATIN7, USART3_TX, LPUART1_RX, QUADSPI_CLK, LCD_SEG10, COMP1_OUT, SAI1_SCK_A, EVENTOUT."+ },+ {+ "number": "48",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fl) with alternate functions TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, LPUART1_TX, QUADSPI_NCS, LCD_SEG11, COMP2_OUT, EVENTOUT."+ },+ {+ "number": "49",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin."+ },+ {+ "number": "50",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23)."+ },+ {+ "number": "51",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM1_BKIN, TIM1_BKIN_COMP2, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS_DE, TSC_G1_IO1, LCD_SEG12, SWPMI1_IO, SAI2_FS_A, TIM15_BKIN, EVENTOUT."+ },+ {+ "number": "52",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fl) with alternate functions TIM1_CH1N, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS, LPUART1_CTS, TSC_G1_IO2, LCD_SEG13, SWPMI1_TX, SAI2_SCK_A, TIM15_CH1N, EVENTOUT."+ },+ {+ "number": "53",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fl) with alternate functions TIM1_CH2N, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS_DE, TSC_G1_IO3, LCD_SEG14, SWPMI1_RX, SAI2_MCLK_A, TIM15_CH1, EVENTOUT."+ },+ {+ "number": "54",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, TSC_G1_IO4, LCD_SEG15, SWPMI1_SUSPEND, SAI2_SD_A, TIM15_CH2, EVENTOUT."+ },+ {+ "number": "55",+ "name": "PD8",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions USART3_TX, LCD_SEG28, FMC_D13, EVENTOUT."+ },+ {+ "number": "56",+ "name": "PD9",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions USART3_RX, LCD_SEG29, FMC_D14, SAI2_MCLK_A, EVENTOUT."+ },+ {+ "number": "57",+ "name": "PD10",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions USART3_CK, TSC_G6_IO1, LCD_SEG30, FMC_D15, SAI2_SCK_A, EVENTOUT."+ },+ {+ "number": "58",+ "name": "PD11",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions USART3_CTS, TSC_G6_IO2, LCD_SEG31, FMC_A16, SAI2_SD_A, LPTIM2_ETR, EVENTOUT."+ },+ {+ "number": "59",+ "name": "PD12",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM4_CH1, USART3_RTS_DE, TSC_G6_IO3, LCD_SEG32, FMC_A17, SAI2_FS_A, LPTIM2_IN1, EVENTOUT."+ },+ {+ "number": "60",+ "name": "PD13",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM4_CH2, TSC_G6_IO4, LCD_SEG33, FMC_A18, LPTIM2_OUT, EVENTOUT."+ },+ {+ "number": "61",+ "name": "PD14",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM4_CH3, LCD_SEG34, FMC_D0, EVENTOUT."+ },+ {+ "number": "62",+ "name": "PD15",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM4_CH4, LCD_SEG35, FMC_D1, EVENTOUT."+ },+ {+ "number": "63",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, LCD_SEG24, SDMMC1_D6, SAI2_MCLK_A, EVENTOUT."+ },+ {+ "number": "64",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, LCD_SEG25, SDMMC1_D7, SAI2_MCLK_B, EVENTOUT."+ },+ {+ "number": "65",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM3_CH3, TIM8_CH3, TSC_G4_IO3, LCD_SEG26, SDMMC1_D0, EVENTOUT."+ },+ {+ "number": "66",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM8_BKIN2, TIM3_CH4, TIM8_CH4, TSC_G4_IO4, OTG_FS_NOE, LCD_SEG27, SDMMC1_D1, SAI2_EXTCLK, TIM8_BKIN2_COMP1, EVENTOUT."+ },+ {+ "number": "67",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions MCO, TIM1_CH1, USART1_CK, OTG_FS_SOF, LCD_COM0, LPTIM2_OUT, EVENTOUT."+ },+ {+ "number": "68",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO with USB support (FT_lu) with alternate functions TIM1_CH2, USART1_TX, LCD_COM1, TIM15_BKIN, EVENTOUT and additional OTG_FS_VBUS."+ },+ {+ "number": "69",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO with USB support (FT_lu) with alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, LCD_COM2, TIM17_BKIN, EVENTOUT."+ },+ {+ "number": "70",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO with USB support (FT_u) with alternate functions TIM1_CH4, TIM1_BKIN2, USART1_CTS, CAN1_RX, OTG_FS_DM, TIM1_BKIN2_COMP1, EVENTOUT."+ },+ {+ "number": "71",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO with USB support (FT_u) with alternate functions TIM1_ETR, USART1_RTS_DE, CAN1_TX, OTG_FS_DP, EVENTOUT."+ },+ {+ "number": "72",+ "name": "PA13 (JTMS-SWDIO)",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) configured after reset as JTMS-SWDIO debug alternate function with internal pull-up active (note 4); other alt functions IR_OUT, OTG_FS_NOE, EVENTOUT."+ },+ {+ "number": "73",+ "name": "VDDUSB",+ "type": "power_in",+ "description": "USB transceiver supply voltage, 3.0 V to 3.6 V when USB is used, 0 to 3.6 V otherwise (Table 23)."+ },+ {+ "number": "74",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin."+ },+ {+ "number": "75",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23)."+ },+ {+ "number": "76",+ "name": "PA14 (JTCK-SWCLK)",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) configured after reset as JTCK-SWCLK debug alternate function with internal pull-down active (note 4); alternate EVENTOUT."+ },+ {+ "number": "77",+ "name": "PA15 (JTDI)",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) configured after reset as JTDI debug alternate function with internal pull-up active (note 4); other alt functions TIM2_CH1, TIM2_ETR, SPI1_NSS, SPI3_NSS, UART4_RTS_DE, TSC_G3_IO1, LCD_SEG17, SAI2_FS_B, EVENTOUT."+ },+ {+ "number": "78",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, LCD_COM4/LCD_SEG28/LCD_SEG40, SDMMC1_D2, SAI2_SCK_B, EVENTOUT."+ },+ {+ "number": "79",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions SPI3_MISO, USART3_RX, UART4_RX, TSC_G3_IO3, LCD_COM5/LCD_SEG29/LCD_SEG41, SDMMC1_D3, SAI2_MCLK_B, EVENTOUT."+ },+ {+ "number": "80",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, LCD_COM6/LCD_SEG30/LCD_SEG42, SDMMC1_CK, SAI2_SD_B, EVENTOUT."+ },+ {+ "number": "81",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, FMC_D2, EVENTOUT."+ },+ {+ "number": "82",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, FMC_D3, EVENTOUT."+ },+ {+ "number": "83",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, LCD_COM7/LCD_SEG31/LCD_SEG43, SDMMC1_CMD, EVENTOUT."+ },+ {+ "number": "84",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions SPI2_MISO, DFSDM1_DATIN0, USART2_CTS, FMC_CLK, EVENTOUT."+ },+ {+ "number": "85",+ "name": "PD4",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, FMC_NOE, EVENTOUT."+ },+ {+ "number": "86",+ "name": "PD5",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions USART2_TX, FMC_NWE, EVENTOUT."+ },+ {+ "number": "87",+ "name": "PD6",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions DFSDM1_DATIN1, USART2_RX, FMC_NWAIT, SAI1_SD_A, EVENTOUT."+ },+ {+ "number": "88",+ "name": "PD7",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT) with alternate functions DFSDM1_CKIN1, USART2_CK, FMC_NE1, EVENTOUT."+ },+ {+ "number": "89",+ "name": "PB3 (JTDO-TRACESWO)",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) configured after reset as JTDO-TRACESWO debug alternate function with internal pull-up active (note 4); other alt functions TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, LCD_SEG7, SAI1_SCK_B, EVENTOUT, additional COMP2_INM."+ },+ {+ "number": "90",+ "name": "PB4 (NJTRST)",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) configured after reset as NJTRST debug alternate function with internal pull-up active (note 4); other alt functions TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, UART5_RTS_DE, TSC_G2_IO1, LCD_SEG8, SAI1_MCLK_B, TIM17_BKIN, EVENTOUT, additional COMP2_INP."+ },+ {+ "number": "91",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_la) with alternate functions LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS, TSC_G2_IO2, LCD_SEG9, COMP2_OUT, SAI1_SD_B, TIM16_BKIN, EVENTOUT."+ },+ {+ "number": "92",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fa) with alternate functions LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, TSC_G2_IO3, TIM8_BKIN2_COMP2, SAI1_FS_B, TIM16_CH1N, EVENTOUT and additional COMP2_INP."+ },+ {+ "number": "93",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fla) with alternate functions LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, UART4_CTS, TSC_G2_IO4, LCD_SEG21, FMC_NL, TIM8_BKIN_COMP1, TIM17_CH1N, EVENTOUT and additional COMP2_INM, PVD_IN."+ },+ {+ "number": "94",+ "name": "BOOT0",+ "type": "input",+ "description": "Dedicated boot mode selection input pin (type B); level sampled at reset selects boot from Flash, system memory or SRAM, accepts input voltage up to 9 V (Table 20)."+ },+ {+ "number": "95",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fl) with alternate functions TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, LCD_SEG16, SDMMC1_D4, SAI1_MCLK_A, TIM16_CH1, EVENTOUT."+ },+ {+ "number": "96",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_fl) with alternate functions IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, DFSDM1_CKIN6, CAN1_TX, LCD_COM3, SDMMC1_D5, SAI1_FS_A, TIM17_CH1, EVENTOUT."+ },+ {+ "number": "97",+ "name": "PE0",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions TIM4_ETR, LCD_SEG36, FMC_NBL0, TIM16_CH1, EVENTOUT."+ },+ {+ "number": "98",+ "name": "PE1",+ "type": "bidirectional",+ "description": "5V-tolerant GPIO (FT_l) with alternate functions LCD_SEG37, FMC_NBL1, TIM17_CH1, EVENTOUT."+ },+ {+ "number": "99",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin."+ },+ {+ "number": "100",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply pin, standard operating range 1.71 V to 3.6 V (Table 23)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: VSS pins (16, 38, 52, 59, 69, 81, 92) all listed as power_in (ground); confirm if these should be cl",+ "17/100 pins cited to the wrong page (name found elsewhere): ['35:PA1@p70', '36:PA2@p70', '37:PA3@p70', '38:VSS@p70']"+ ],+ "pages_sent": 99,+ "cost_usd": 1.3557,+ "at": "2026-09-22T19:09:38"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893294750916608",+ "pages": 270,+ "sha256": "241f8f908b7f839d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 100,+ "described": 100,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}