component
STM32L100R8T6A
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32L100R8T6A++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32L100R8T6A from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VLCD | power_in | LCD controller supply pin (VLCD), whose rail decoupling is specified in Table 6 of the datasheet. |+| 2 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with default function PC13 and additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2. |+| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V (TC) I/O with default function PC14, which becomes OSC32_IN only when the LSE oscillator is on (LSEON bit in RCC_CSR). |+| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O with default function PC15, which becomes OSC32_OUT only when the LSE oscillator is on (LSEON bit in RCC_CSR). |+| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V (TC) I/O with default function PH0, which becomes OSC_IN only when the HSE oscillator is on (HSEON bit in RCC_CR). |+| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V (TC) I/O with default function PH1, which becomes OSC_OUT only when the HSE oscillator is on (HSEON bit in RCC_CR). |+| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |+| 8 | PC0 | bidirectional | 5 V tolerant (FT) I/O with default function PC0, alternate function LCD_SEG18 and additional functions ADC_IN10 and COMP1_INP. |+| 9 | PC1 | bidirectional | 5 V tolerant (FT) I/O with default function PC1, alternate function LCD_SEG19 and additional functions ADC_IN11 and COMP1_INP. |+| 10 | PC2 | bidirectional | 5 V tolerant (FT) I/O with default function PC2, alternate function LCD_SEG20 and additional functions ADC_IN12 and COMP1_INP. |+| 11 | PC3 | bidirectional | Standard 3.3 V (TC) I/O with default function PC3, alternate function LCD_SEG21 and additional functions ADC_IN13 and COMP1_INP. |+| 12 | VSSA | power_in | Analog ground pin of the device. |+| 13 | VDDA | power_in | Analog supply pin of the device. |+| 14 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O with default function PA0, alternate functions USART2_CTS and TIM2_CH1_ETR, and additional functions WKUP1, ADC_IN0 and COMP1_INP. |+| 15 | PA1 | bidirectional | 5 V tolerant (FT) I/O with default function PA1, alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0, and additional functions ADC_IN1 and COMP1_INP. |+| 16 | PA2 | bidirectional | 5 V tolerant (FT) I/O with default function PA2, alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1, and additional functions ADC_IN2 and COMP1_INP. |+| 17 | PA3 | bidirectional | Standard 3.3 V (TC) I/O with default function PA3, alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2, and additional functions ADC_IN3 and COMP1_INP. |+| 18 | VSS_4 | power_in | Digital ground pin of the device. |+| 19 | VDD_4 | power_in | Digital supply pin of the device. |+| 20 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with default function PA4, alternate functions SPI1_NSS and USART2_CK, and additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |+| 21 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with default function PA5, alternate functions SPI1_SCK and TIM2_CH1_ETR, and additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |+| 22 | PA6 | bidirectional | 5 V tolerant (FT) I/O with default function PA6, alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1, and additional functions ADC_IN6 and COMP1_INP. |+| 23 | PA7 | bidirectional | 5 V tolerant (FT) I/O with default function PA7, alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1, and additional functions ADC_IN7 and COMP1_INP. |+| 24 | PC4 | bidirectional | 5 V tolerant (FT) I/O with default function PC4, alternate function LCD_SEG22 and additional functions ADC_IN14 and COMP1_INP. |+| 25 | PC5 | bidirectional | 5 V tolerant (FT) I/O with default function PC5, alternate function LCD_SEG23 and additional functions ADC_IN15 and COMP1_INP. |+| 26 | PB0 | bidirectional | Standard 3.3 V (TC) I/O with default function PB0, alternate functions TIM3_CH3 and LCD_SEG5, and additional functions ADC_IN8, COMP1_INP and VREF_OUT. |+| 27 | PB1 | bidirectional | 5 V tolerant (FT) I/O with default function PB1, alternate functions TIM3_CH4 and LCD_SEG6, and additional functions ADC_IN9, COMP1_INP and VREF_OUT. |+| 28 | PB2/BOOT1 | bidirectional | 5 V tolerant (FT) I/O with default function PB2/BOOT1, where BOOT1 is the additional function. |+| 29 | PB10 | bidirectional | 5 V tolerant (FT) I/O with default function PB10, alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10. |+| 30 | PB11 | bidirectional | 5 V tolerant (FT) I/O with default function PB11, alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11. |+| 31 | VSS_1 | power_in | Digital ground pin of the device. |+| 32 | VDD_1 | power_in | Digital supply pin of the device. |+| 33 | PB12 | bidirectional | 5 V tolerant (FT) I/O with default function PB12, alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1, and additional functions ADC_IN18 and COMP1_INP. |+| 34 | PB13 | bidirectional | 5 V tolerant (FT) I/O with default function PB13, alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1, and additional functions ADC_IN19 and COMP1_INP. |+| 35 | PB14 | bidirectional | 5 V tolerant (FT) I/O with default function PB14, alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2, and additional functions ADC_IN20 and COMP1_INP. |+| 36 | PB15 | bidirectional | 5 V tolerant (FT) I/O with default function PB15, alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1, and additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |+| 37 | PC6 | bidirectional | 5 V tolerant (FT) I/O with default function PC6 and alternate functions TIM3_CH1 and LCD_SEG24. |+| 38 | PC7 | bidirectional | 5 V tolerant (FT) I/O with default function PC7 and alternate functions TIM3_CH2 and LCD_SEG25. |+| 39 | PC8 | bidirectional | 5 V tolerant (FT) I/O with default function PC8 and alternate functions TIM3_CH3 and LCD_SEG26. |+| 40 | PC9 | bidirectional | 5 V tolerant (FT) I/O with default function PC9 and alternate functions TIM3_CH4 and LCD_SEG27. |+| 41 | PA8 | bidirectional | 5 V tolerant (FT) I/O with default function PA8, alternate functions USART1_CK, MCO and LCD_COM0. |+| 42 | PA9 | bidirectional | 5 V tolerant (FT) I/O with default function PA9, alternate functions USART1_TX and LCD_COM1. |+| 43 | PA10 | bidirectional | 5 V tolerant (FT) I/O with default function PA10, alternate functions USART1_RX and LCD_COM2. |+| 44 | PA11 | bidirectional | 5 V tolerant (FT) I/O with default function PA11, alternate functions USART1_CTS and SPI1_MISO, and additional function USB_DM. |+| 45 | PA12 | bidirectional | 5 V tolerant (FT) I/O with default function PA12, alternate functions USART1_RTS and SPI1_MOSI, and additional function USB_DP. |+| 46 | PA13 | bidirectional | 5 V tolerant (FT) I/O with default function JTMS-SWDIO. |+| 47 | VSS_2 | power_in | Digital ground pin of the device. |+| 48 | VDD_2 | power_in | Digital supply pin of the device. |+| 49 | PA14 | bidirectional | 5 V tolerant (FT) I/O with default function JTCK-SWCLK. |+| 50 | PA15 | bidirectional | 5 V tolerant (FT) I/O with default function JTDI, alternate functions TIM2_CH1_ETR, PA15, SPI1_NSS and LCD_SEG17. |+| 51 | PC10 | bidirectional | 5 V tolerant (FT) I/O with default function PC10 and alternate functions USART3_TX, LCD_SEG28, LCD_SEG40 and LCD_COM4. |+| 52 | PC11 | bidirectional | 5 V tolerant (FT) I/O with default function PC11 and alternate functions USART3_RX, LCD_SEG29, LCD_SEG41 and LCD_COM5. |+| 53 | PC12 | bidirectional | 5 V tolerant (FT) I/O with default function PC12 and alternate functions USART3_CK, LCD_SEG30, LCD_SEG42 and LCD_COM6. |+| 54 | PD2 | bidirectional | 5 V tolerant (FT) I/O with default function PD2 and alternate functions TIM3_ETR, LCD_SEG31, LCD_SEG43 and LCD_COM7. |+| 55 | PB3 | bidirectional | 5 V tolerant (FT) I/O with default function JTDO, alternate functions TIM2_CH2, PB3, SPI1_SCK and LCD_SEG7, and additional function COMP2_INM. |+| 56 | PB4 | bidirectional | 5 V tolerant (FT) I/O with default function NJTRST, alternate functions TIM3_CH1, PB4, SPI1_MISO and LCD_SEG8, and additional function COMP2_INP. |+| 57 | PB5 | bidirectional | 5 V tolerant (FT) I/O with default function PB5, alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9, and additional function COMP2_INP. |+| 58 | PB6 | bidirectional | 5 V tolerant (FT) I/O with default function PB6, alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX. |+| 59 | PB7 | bidirectional | 5 V tolerant (FT) I/O with default function PB7, alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX, and additional function PVD_IN. |+| 60 | BOOT0 | input | Dedicated BOOT0 input-only pin (structure B). |+| 61 | PB8 | bidirectional | 5 V tolerant (FT) I/O with default function PB8, alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1. |+| 62 | PB9 | bidirectional | 5 V tolerant (FT) I/O with default function PB9, alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1. |+| 63 | VSS_3 | power_in | Digital ground pin of the device. |+| 64 | VDD_3 | power_in | Digital supply pin of the device. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32L100R8T6A`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32l100r8t6a-etched.step` / `stm32l100r8t6a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l100r8t6a.step` / `stm32l100r8t6a.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923200742416384) (103 pp, sha256 `71adc9838950041a`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32l100r8t6a-datasheet.pdf)
page.jsonadded+535@@ -0,0 +1,535 @@+{+ "slug": "stm32l100r8t6a",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32l100r8t6a",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32l100r8t6a.kicad_sym",+ "stm32l100r8t6a.kicad_mod",+ "stm32l100r8t6a.glb",+ "stm32l100r8t6a.step",+ "stm32l100r8t6a.lbr",+ "docs/hero.png",+ "docs/stm32l100r8t6a-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32l100r8t6a-hero.glb",+ "stm32l100r8t6a-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32L100R8T6A",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923200742416384",+ "parts": {+ "symbol": "stm32l100r8t6a.kicad_sym",+ "footprint": "stm32l100r8t6a.kicad_mod",+ "model_3d": "stm32l100r8t6a-hero.glb",+ "model_3d_plain": "stm32l100r8t6a.glb",+ "model_3d_step": "stm32l100r8t6a-etched.step",+ "model_3d_step_plain": "stm32l100r8t6a.step",+ "lbr": "stm32l100r8t6a.lbr"+ },+ "distributor_links": {+ "lcsc": "C1338320",+ "digikey": "497-17509-ND",+ "mouser": "511-STM32L100R8T6A"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T04:27:20Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-17509-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32L100R8T6A",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VLCD",+ "type": "power_in",+ "description": "LCD controller supply pin (VLCD), whose rail decoupling is specified in Table 6 of the datasheet."+ },+ {+ "number": "2",+ "name": "PC13-WKUP2",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC13 and additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PC14, which becomes OSC32_IN only when the LSE oscillator is on (LSEON bit in RCC_CSR)."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PC15, which becomes OSC32_OUT only when the LSE oscillator is on (LSEON bit in RCC_CSR)."+ },+ {+ "number": "5",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PH0, which becomes OSC_IN only when the HSE oscillator is on (HSEON bit in RCC_CR)."+ },+ {+ "number": "6",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PH1, which becomes OSC_OUT only when the HSE oscillator is on (HSEON bit in RCC_CR)."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with an embedded weak pull-up resistor."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC0, alternate function LCD_SEG18 and additional functions ADC_IN10 and COMP1_INP."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC1, alternate function LCD_SEG19 and additional functions ADC_IN11 and COMP1_INP."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC2, alternate function LCD_SEG20 and additional functions ADC_IN12 and COMP1_INP."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PC3, alternate function LCD_SEG21 and additional functions ADC_IN13 and COMP1_INP."+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground pin of the device."+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply pin of the device."+ },+ {+ "number": "14",+ "name": "PA0-WKUP1",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA0, alternate functions USART2_CTS and TIM2_CH1_ETR, and additional functions WKUP1, ADC_IN0 and COMP1_INP."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA1, alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0, and additional functions ADC_IN1 and COMP1_INP."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA2, alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1, and additional functions ADC_IN2 and COMP1_INP."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PA3, alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2, and additional functions ADC_IN3 and COMP1_INP."+ },+ {+ "number": "18",+ "name": "VSS_4",+ "type": "power_in",+ "description": "Digital ground pin of the device."+ },+ {+ "number": "19",+ "name": "VDD_4",+ "type": "power_in",+ "description": "Digital supply pin of the device."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PA4, alternate functions SPI1_NSS and USART2_CK, and additional functions ADC_IN4, DAC_OUT1 and COMP1_INP."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PA5, alternate functions SPI1_SCK and TIM2_CH1_ETR, and additional functions ADC_IN5, DAC_OUT2 and COMP1_INP."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA6, alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1, and additional functions ADC_IN6 and COMP1_INP."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA7, alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1, and additional functions ADC_IN7 and COMP1_INP."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC4, alternate function LCD_SEG22 and additional functions ADC_IN14 and COMP1_INP."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC5, alternate function LCD_SEG23 and additional functions ADC_IN15 and COMP1_INP."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "Standard 3.3 V (TC) I/O with default function PB0, alternate functions TIM3_CH3 and LCD_SEG5, and additional functions ADC_IN8, COMP1_INP and VREF_OUT."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB1, alternate functions TIM3_CH4 and LCD_SEG6, and additional functions ADC_IN9, COMP1_INP and VREF_OUT."+ },+ {+ "number": "28",+ "name": "PB2/BOOT1",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB2/BOOT1, where BOOT1 is the additional function."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB10, alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10."+ },+ {+ "number": "30",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB11, alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11."+ },+ {+ "number": "31",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Digital ground pin of the device."+ },+ {+ "number": "32",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Digital supply pin of the device."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB12, alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1, and additional functions ADC_IN18 and COMP1_INP."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB13, alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1, and additional functions ADC_IN19 and COMP1_INP."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB14, alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2, and additional functions ADC_IN20 and COMP1_INP."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB15, alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1, and additional functions ADC_IN21, COMP1_INP and RTC_REFIN."+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC6 and alternate functions TIM3_CH1 and LCD_SEG24."+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC7 and alternate functions TIM3_CH2 and LCD_SEG25."+ },+ {+ "number": "39",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC8 and alternate functions TIM3_CH3 and LCD_SEG26."+ },+ {+ "number": "40",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC9 and alternate functions TIM3_CH4 and LCD_SEG27."+ },+ {+ "number": "41",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA8, alternate functions USART1_CK, MCO and LCD_COM0."+ },+ {+ "number": "42",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA9, alternate functions USART1_TX and LCD_COM1."+ },+ {+ "number": "43",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA10, alternate functions USART1_RX and LCD_COM2."+ },+ {+ "number": "44",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA11, alternate functions USART1_CTS and SPI1_MISO, and additional function USB_DM."+ },+ {+ "number": "45",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PA12, alternate functions USART1_RTS and SPI1_MOSI, and additional function USB_DP."+ },+ {+ "number": "46",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function JTMS-SWDIO."+ },+ {+ "number": "47",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Digital ground pin of the device."+ },+ {+ "number": "48",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Digital supply pin of the device."+ },+ {+ "number": "49",+ "name": "PA14",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function JTCK-SWCLK."+ },+ {+ "number": "50",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function JTDI, alternate functions TIM2_CH1_ETR, PA15, SPI1_NSS and LCD_SEG17."+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC10 and alternate functions USART3_TX, LCD_SEG28, LCD_SEG40 and LCD_COM4."+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC11 and alternate functions USART3_RX, LCD_SEG29, LCD_SEG41 and LCD_COM5."+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PC12 and alternate functions USART3_CK, LCD_SEG30, LCD_SEG42 and LCD_COM6."+ },+ {+ "number": "54",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PD2 and alternate functions TIM3_ETR, LCD_SEG31, LCD_SEG43 and LCD_COM7."+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function JTDO, alternate functions TIM2_CH2, PB3, SPI1_SCK and LCD_SEG7, and additional function COMP2_INM."+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function NJTRST, alternate functions TIM3_CH1, PB4, SPI1_MISO and LCD_SEG8, and additional function COMP2_INP."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB5, alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9, and additional function COMP2_INP."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB6, alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB7, alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX, and additional function PVD_IN."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Dedicated BOOT0 input-only pin (structure B)."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB8, alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1."+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V tolerant (FT) I/O with default function PB9, alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1."+ },+ {+ "number": "63",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Digital ground pin of the device."+ },+ {+ "number": "64",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Digital supply pin of the device."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Table 9 (page 33) prints the first row's LQFP64 pin number as '11' ('11 VLCD'), but pin 11 is alread; Pin positions were taken only from Table 9 (pin definitions); the Figure 3 pinout drawing was not re; The LQFP64 is the package for the STM32L100R8T6A (ordering code T = LQFP, R = 64 pins, Table 65), an"+ ],+ "pages_sent": 33,+ "cost_usd": 0.1958,+ "at": "2026-10-08T04:26:53"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923200742416384",+ "pages": 103,+ "sha256": "71adc9838950041a",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32l100r8t6a.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12,+ 12,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32l100r8t6a-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12,+ 12,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "bc97b139cdc3c1c7c5bb913ce10c04efd19e06e2d7704f657b5e98cf4d577d46",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}