← Commit history

Initial commit: component/stm32l071rzt6

Ray ·4030c85564 ·
2 files changed +594
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32L071RZT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32L071RZT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Main digital supply pin; operating range 1.65 V to 3.6 V (BOR disabled) or 1.8 V to 3.6 V (BOR enabled at power-on). |+| 2 | PC13 | bidirectional | 5-V-tolerant I/O (FT); no alternate functions; additional functions RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2; floating input at reset. |+| 3 | PC14 | bidirectional | Standard 3.3 V I/O (TC) multiplexed with 32.768 kHz LSE crystal oscillator input (OSC32_IN); GPIO function active after reset. |+| 4 | PC15 | bidirectional | Standard 3.3 V I/O (TC) multiplexed with 32.768 kHz LSE crystal oscillator output (OSC32_OUT); GPIO function active after reset. |+| 5 | PH0 | bidirectional | Standard 3.3 V I/O (TC) multiplexed with HSE crystal oscillator input (OSC_IN); GPIO function active after reset. |+| 6 | PH1 | bidirectional | Standard 3.3 V I/O (TC) multiplexed with HSE crystal oscillator output (OSC_OUT); GPIO function active after reset. |+| 7 | NRST | bidirectional | Active-low bidirectional reset pin with embedded 25-65 kΩ pull-up; VIL max = 0.8 V, VIH min = 1.4 V; pulses below 50 ns filtered. |+| 8 | PC0 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions LPTIM1_IN1, EVENTOUT, LPUART1_RX, I2C3_SCL; additional function ADC_IN10. |+| 9 | PC1 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions LPTIM1_OUT, EVENTOUT, LPUART1_TX, I2C3_SDA; additional function ADC_IN11. |+| 10 | PC2 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions LPTIM1_IN2, SPI2_MISO/I2S2_MCK; additional function ADC_IN12. |+| 11 | PC3 | bidirectional | 5-V-tolerant I/O (FT); alternate functions LPTIM1_ETR, SPI2_MOSI/I2S2_SD; additional function ADC_IN13. |+| 12 | VSSA | power_in | Analog ground reference for ADC, comparators, PLL, and RC oscillators; must be connected to VSS. |+| 13 | VDDA | power_in | Analog power supply for ADC, comparators, PLL, and RC oscillators; 1.65 V to 3.6 V; must match VDD within 300 mV. |+| 14 | PA0 | bidirectional | I/O with I/O structure marked 'TTa' in datasheet (see review note); alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX, COMP1_OUT; additional functions COMP1_INM, ADC_IN0, RTC_TAMP2/WKUP1. |+| 15 | PA1 | bidirectional | 5-V-tolerant I/O (FT); alternate functions EVENTOUT, TIM2_CH2, USART2_RTS_DE, TIM21_ETR, USART4_RX; additional functions COMP1_INP, ADC_IN1. |+| 16 | PA2 | bidirectional | 5-V-tolerant I/O (FT); alternate functions TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX, COMP2_OUT; additional functions COMP2_INM, ADC_IN2. |+| 17 | PA3 | bidirectional | 5-V-tolerant I/O (FT); alternate functions TIM21_CH2, TIM2_CH4, USART2_RX, LPUART1_RX; additional functions COMP2_INP, ADC_IN3. |+| 18 | VSS | power_in | Digital ground; must be connected to external ground supply. |+| 19 | VDD | power_in | Main digital supply pin; operating range 1.65 V to 3.6 V. |+| 20 | PA4 | bidirectional | Standard 3.3 V I/O (TC); alternate functions SPI1_NSS, USART2_CK, TIM22_ETR; additional functions COMP1_INM, COMP2_INM, ADC_IN4. |+| 21 | PA5 | bidirectional | Standard 3.3 V I/O (TC); alternate functions SPI1_SCK, TIM2_ETR, TIM2_CH1; additional functions COMP1_INM, COMP2_INM, ADC_IN5. |+| 22 | PA6 | bidirectional | 5-V-tolerant I/O (FT); alternate functions SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT, COMP1_OUT; additional function ADC_IN6. |+| 23 | PA7 | bidirectional | 5-V-tolerant I/O (FT); alternate functions SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT, COMP2_OUT; additional function ADC_IN7. |+| 24 | PC4 | bidirectional | 5-V-tolerant I/O (FT); alternate functions EVENTOUT, LPUART1_TX; additional function ADC_IN14. |+| 25 | PC5 | bidirectional | 5-V-tolerant I/O (FT); alternate function LPUART1_RX; additional function ADC_IN15. |+| 26 | PB0 | bidirectional | 5-V-tolerant I/O (FT); alternate functions EVENTOUT, TIM3_CH3; additional functions ADC_IN8, VREF_OUT. |+| 27 | PB1 | bidirectional | 5-V-tolerant I/O (FT); alternate functions TIM3_CH4, LPUART1_RTS_DE; additional functions ADC_IN9, VREF_OUT. |+| 28 | PB2 | bidirectional | 5-V-tolerant I/O (FT); alternate functions LPTIM1_OUT, I2C3_SMBA. |+| 29 | PB10 | bidirectional | 5-V-tolerant I/O (FT); alternate functions TIM2_CH3, LPUART1_TX, SPI2_SCK/I2S2_CK, I2C2_SCL, LPUART1_RX. |+| 30 | PB11 | bidirectional | 5-V-tolerant I/O (FT); alternate functions EVENTOUT, TIM2_CH4, LPUART1_RX, I2C2_SDA, LPUART1_TX. |+| 31 | VSS | power_in | Digital ground; must be connected to external ground supply. |+| 32 | VDD | power_in | Main digital supply pin; operating range 1.65 V to 3.6 V. |+| 33 | PB12 | bidirectional | 5-V-tolerant I/O (FT); alternate functions SPI2_NSS/I2S2_WS, LPUART1_RTS_DE, I2C2_SMBA, EVENTOUT. |+| 34 | PB13 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions SPI2_SCK/I2S2_CK, MCO, LPUART1_CTS, I2C2_SCL, TIM21_CH1. |+| 35 | PB14 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions SPI2_MISO/I2S2_MCK, RTC_OUT, LPUART1_RTS_DE, I2C2_SDA, TIM21_CH2. |+| 36 | PB15 | bidirectional | 5-V-tolerant I/O (FT); alternate functions SPI2_MOSI/I2S2_SD, RTC_REFIN. |+| 37 | PC6 | bidirectional | 5-V-tolerant I/O (FT); alternate functions TIM22_CH1, TIM3_CH1. |+| 38 | PC7 | bidirectional | 5-V-tolerant I/O (FT); alternate functions TIM22_CH2, TIM3_CH2. |+| 39 | PC8 | bidirectional | 5-V-tolerant I/O (FT); alternate functions TIM22_ETR, TIM3_CH3. |+| 40 | PC9 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions TIM21_ETR, TIM3_CH4, I2C3_SDA. |+| 41 | PA8 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions MCO, EVENTOUT, USART1_CK, I2C3_SCL. |+| 42 | PA9 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions MCO, USART1_TX, I2C1_SCL, I2C3_SMBA. |+| 43 | PA10 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions USART1_RX, I2C1_SDA. |+| 44 | PA11 | bidirectional | 5-V-tolerant I/O (FT) powered by VDDIO2 (not VDD); alternate functions SPI1_MISO, EVENTOUT, USART1_CTS, COMP1_OUT. |+| 45 | PA12 | bidirectional | 5-V-tolerant I/O (FT) powered by VDDIO2 (not VDD); alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS_DE, COMP2_OUT. |+| 46 | PA13 | bidirectional | 5-V-tolerant I/O (FT); default function after reset SWDIO (Serial Wire Debug data, AF0); alternate functions SWDIO, LPUART1_RX. |+| 47 | VSS | power_in | Digital ground; must be connected to external ground supply. |+| 48 | VDDIO2 | power_in | Independent I/O supply for PA11 and PA12; 1.65 V to 3.6 V; maximum total current 25 mA; independent from VDD and VDDA. |+| 49 | PA14 | bidirectional | 5-V-tolerant I/O (FT); default function after reset SWCLK (Serial Wire Debug clock, AF0); alternate functions SWCLK, USART2_TX, LPUART1_TX. |+| 50 | PA15 | bidirectional | 5-V-tolerant I/O (FT); alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1, USART4_RTS_DE. |+| 51 | PC10 | bidirectional | 5-V-tolerant I/O (FT); alternate functions LPUART1_TX, USART4_TX. |+| 52 | PC11 | bidirectional | 5-V-tolerant I/O (FT); alternate functions LPUART1_RX, USART4_RX. |+| 53 | PC12 | bidirectional | 5-V-tolerant I/O (FT); alternate functions USART5_TX, USART4_CK. |+| 54 | PD2 | bidirectional | 5-V-tolerant I/O (FT); alternate functions LPUART1_RTS_DE, TIM3_ETR, USART5_RX. |+| 55 | PB3 | bidirectional | 5-V-tolerant I/O (FT); alternate functions SPI1_SCK, TIM2_CH2, EVENTOUT, USART1_RTS_DE, USART5_TX; additional function COMP2_INM. |+| 56 | PB4 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX, I2C3_SDA; additional function COMP2_INP. |+| 57 | PB5 | bidirectional | 5-V-tolerant I/O (FT); alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK/USART5_RTS_DE; additional function COMP2_INP. |+| 58 | PB6 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR; additional function COMP2_INP. |+| 59 | PB7 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2, USART4_CTS; additional functions COMP2_INP, VREF_PVD_IN. |+| 60 | BOOT0 | input | Dedicated BOOT0 input pin (type B); selects boot mode at startup with nBOOT1 option bit; VIL max = 0.14×VDD, input range 0 to VDD+4.0 V. |+| 61 | PB8 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate function I2C1_SCL. |+| 62 | PB9 | bidirectional | 5-V-tolerant FM+-capable I/O (FTf); alternate functions EVENTOUT, I2C1_SDA, SPI2_NSS/I2S2_WS. |+| 63 | VSS | power_in | Digital ground; must be connected to external ground supply. |+| 64 | VDD | power_in | Main digital supply pin; operating range 1.65 V to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32L071RZT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32l071rzt6-etched.step` / `stm32l071rzt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l071rzt6.step` / `stm32l071rzt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183187542790144) (139 pp, sha256 `5d06ff859a839555`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32l071rzt6-datasheet.pdf)
page.jsonadded+494
@@ -0,0 +1,494 @@+{+  "slug": "stm32l071rzt6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32l071rzt6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32l071rzt6.kicad_sym",+    "stm32l071rzt6.kicad_mod",+    "stm32l071rzt6.glb",+    "stm32l071rzt6.step",+    "stm32l071rzt6.lbr",+    "docs/hero.png",+    "docs/stm32l071rzt6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32L071RZT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183187542790144",+    "parts": {+      "symbol": "stm32l071rzt6.kicad_sym",+      "footprint": "stm32l071rzt6.kicad_mod",+      "model_3d": "stm32l071rzt6-etched.glb",+      "model_3d_plain": "stm32l071rzt6.glb",+      "model_3d_step": "stm32l071rzt6-etched.step",+      "model_3d_step_plain": "stm32l071rzt6.step",+      "lbr": "stm32l071rzt6.lbr"+    },+    "distributor_links": {+      "lcsc": "C169182",+      "digikey": "497-17502-ND",+      "mouser": "511-STM32L071RZT6"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T06:27:44Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-17502-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32L071RZT6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VDD",+        "type": "power_in",+        "description": "Main digital supply pin; operating range 1.65 V to 3.6 V (BOR disabled) or 1.8 V to 3.6 V (BOR enabled at power-on)."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); no alternate functions; additional functions RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2; floating input at reset."+      },+      {+        "number": "3",+        "name": "PC14",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC) multiplexed with 32.768 kHz LSE crystal oscillator input (OSC32_IN); GPIO function active after reset."+      },+      {+        "number": "4",+        "name": "PC15",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC) multiplexed with 32.768 kHz LSE crystal oscillator output (OSC32_OUT); GPIO function active after reset."+      },+      {+        "number": "5",+        "name": "PH0",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC) multiplexed with HSE crystal oscillator input (OSC_IN); GPIO function active after reset."+      },+      {+        "number": "6",+        "name": "PH1",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC) multiplexed with HSE crystal oscillator output (OSC_OUT); GPIO function active after reset."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active-low bidirectional reset pin with embedded 25-65 kΩ pull-up; VIL max = 0.8 V, VIH min = 1.4 V; pulses below 50 ns filtered."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions LPTIM1_IN1, EVENTOUT, LPUART1_RX, I2C3_SCL; additional function ADC_IN10."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions LPTIM1_OUT, EVENTOUT, LPUART1_TX, I2C3_SDA; additional function ADC_IN11."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions LPTIM1_IN2, SPI2_MISO/I2S2_MCK; additional function ADC_IN12."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions LPTIM1_ETR, SPI2_MOSI/I2S2_SD; additional function ADC_IN13."+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference for ADC, comparators, PLL, and RC oscillators; must be connected to VSS."+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply for ADC, comparators, PLL, and RC oscillators; 1.65 V to 3.6 V; must match VDD within 300 mV."+      },+      {+        "number": "14",+        "name": "PA0",+        "type": "bidirectional",+        "description": "I/O with I/O structure marked 'TTa' in datasheet (see review note); alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX, COMP1_OUT; additional functions COMP1_INM, ADC_IN0, RTC_TAMP2/WKUP1."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions EVENTOUT, TIM2_CH2, USART2_RTS_DE, TIM21_ETR, USART4_RX; additional functions COMP1_INP, ADC_IN1."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX, COMP2_OUT; additional functions COMP2_INM, ADC_IN2."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions TIM21_CH2, TIM2_CH4, USART2_RX, LPUART1_RX; additional functions COMP2_INP, ADC_IN3."+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground; must be connected to external ground supply."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Main digital supply pin; operating range 1.65 V to 3.6 V."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC); alternate functions SPI1_NSS, USART2_CK, TIM22_ETR; additional functions COMP1_INM, COMP2_INM, ADC_IN4."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC); alternate functions SPI1_SCK, TIM2_ETR, TIM2_CH1; additional functions COMP1_INM, COMP2_INM, ADC_IN5."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT, COMP1_OUT; additional function ADC_IN6."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT, COMP2_OUT; additional function ADC_IN7."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions EVENTOUT, LPUART1_TX; additional function ADC_IN14."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate function LPUART1_RX; additional function ADC_IN15."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions EVENTOUT, TIM3_CH3; additional functions ADC_IN8, VREF_OUT."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions TIM3_CH4, LPUART1_RTS_DE; additional functions ADC_IN9, VREF_OUT."+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions LPTIM1_OUT, I2C3_SMBA."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions TIM2_CH3, LPUART1_TX, SPI2_SCK/I2S2_CK, I2C2_SCL, LPUART1_RX."+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions EVENTOUT, TIM2_CH4, LPUART1_RX, I2C2_SDA, LPUART1_TX."+      },+      {+        "number": "31",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground; must be connected to external ground supply."+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Main digital supply pin; operating range 1.65 V to 3.6 V."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions SPI2_NSS/I2S2_WS, LPUART1_RTS_DE, I2C2_SMBA, EVENTOUT."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions SPI2_SCK/I2S2_CK, MCO, LPUART1_CTS, I2C2_SCL, TIM21_CH1."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions SPI2_MISO/I2S2_MCK, RTC_OUT, LPUART1_RTS_DE, I2C2_SDA, TIM21_CH2."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions SPI2_MOSI/I2S2_SD, RTC_REFIN."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions TIM22_CH1, TIM3_CH1."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions TIM22_CH2, TIM3_CH2."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions TIM22_ETR, TIM3_CH3."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions TIM21_ETR, TIM3_CH4, I2C3_SDA."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions MCO, EVENTOUT, USART1_CK, I2C3_SCL."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions MCO, USART1_TX, I2C1_SCL, I2C3_SMBA."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions USART1_RX, I2C1_SDA."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT) powered by VDDIO2 (not VDD); alternate functions SPI1_MISO, EVENTOUT, USART1_CTS, COMP1_OUT."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT) powered by VDDIO2 (not VDD); alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS_DE, COMP2_OUT."+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); default function after reset SWDIO (Serial Wire Debug data, AF0); alternate functions SWDIO, LPUART1_RX."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground; must be connected to external ground supply."+      },+      {+        "number": "48",+        "name": "VDDIO2",+        "type": "power_in",+        "description": "Independent I/O supply for PA11 and PA12; 1.65 V to 3.6 V; maximum total current 25 mA; independent from VDD and VDDA."+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); default function after reset SWCLK (Serial Wire Debug clock, AF0); alternate functions SWCLK, USART2_TX, LPUART1_TX."+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1, USART4_RTS_DE."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions LPUART1_TX, USART4_TX."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions LPUART1_RX, USART4_RX."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions USART5_TX, USART4_CK."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions LPUART1_RTS_DE, TIM3_ETR, USART5_RX."+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions SPI1_SCK, TIM2_CH2, EVENTOUT, USART1_RTS_DE, USART5_TX; additional function COMP2_INM."+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX, I2C3_SDA; additional function COMP2_INP."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5-V-tolerant I/O (FT); alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK/USART5_RTS_DE; additional function COMP2_INP."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR; additional function COMP2_INP."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2, USART4_CTS; additional functions COMP2_INP, VREF_PVD_IN."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated BOOT0 input pin (type B); selects boot mode at startup with nBOOT1 option bit; VIL max = 0.14×VDD, input range 0 to VDD+4.0 V."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate function I2C1_SCL."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5-V-tolerant FM+-capable I/O (FTf); alternate functions EVENTOUT, I2C1_SDA, SPI2_NSS/I2S2_WS."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground; must be connected to external ground supply."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Main digital supply pin; operating range 1.65 V to 3.6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PA11 and PA12 are supplied by independent VDDIO2 power line, not standard VDD. They appear greyed ou; Several pins have dual functions: PC14/OSC32_IN and PC15/OSC32_OUT indicate crystal oscillator pins;; VDDIO2 (pin 58) is independent from main power supply; must be bypassed separately if used for PA11/",+          "5/64 pins cited to the wrong page (name found elsewhere): ['32:PD2@p41', '33:PD3@p41', '34:PD4@p41', '35:PD5@p41']"+        ],+        "pages_sent": 139,+        "cost_usd": 1.3603,+        "at": "2026-09-27T06:27:16"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183187542790144",+        "pages": 139,+        "sha256": "5d06ff859a839555",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file