← Commit history

Publish 0.1.1

Ray ·1309b6e604 · ·parent 689075e
4 files changed +881−57
package.json+67−47
@@ -1,6 +1,6 @@ {   "slug": "stm32l071kbu6",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",   "tags": [@@ -26,7 +26,10 @@     "docs/hero.png",     "docs/stm32l071kbu6-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "stm32l071kbu6-etched.step",+    "stm32l071kbu6-hero.glb",+    "stm32l071kbu6-hero.overlay.json"   ],   "component": {     "mpn": "STM32L071KBU6",@@ -51,7 +54,7 @@       "mouser": "511-STM32L071KBU6"     },     "distributor_check": {-      "checked_at": "2026-10-01T17:48:50Z",+      "checked_at": "2026-10-01T18:14:29Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "497-17499-ND",@@ -67,193 +70,193 @@         "number": "1",         "name": "PC14-OSC32_IN",         "type": "bidirectional",-        "description": "Port C pin 14 configured as external 32.768 kHz oscillator input, 5V tolerant I/O"+        "description": "PC14 I/O (FT, 5 V tolerant) whose additional function is OSC32_IN, the 32 kHz LSE oscillator input."       },       {         "number": "2",         "name": "PC15-OSC32_OUT",         "type": "bidirectional",-        "description": "Port C pin 15 configured as external 32.768 kHz oscillator output, standard 3.3V I/O"+        "description": "PC15 I/O (TC, standard 3.3 V) whose additional function is OSC32_OUT, the 32 kHz LSE oscillator output."       },       {         "number": "3",         "name": "NRST",         "type": "bidirectional",-        "description": "Bidirectional reset input pin with embedded weak pull-up resistor and filtering capability"+        "description": "Bidirectional reset pin with embedded weak pull-up resistor."       },       {         "number": "4",         "name": "VSSA",         "type": "power_in",-        "description": "Analog ground reference supply pin, 0 V"+        "description": "Analog ground supply pin."       },       {         "number": "5",         "name": "VDDA",         "type": "power_in",-        "description": "Analog power supply pin for ADC and comparators, 1.65 to 3.6 V"+        "description": "Analog supply pin (minimum 1.65 V per the general operating conditions revision note)."       },       {         "number": "6",         "name": "PA0",         "type": "bidirectional",-        "description": "Port A pin 0, TTL I/O with ADC_IN0, comparator input/output, timer and USART alternate functions"+        "description": "PA0 I/O (TT_a) with TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT alternate functions, plus COMP1_INM, ADC_IN0 and RTC_TAMP2/WKUP1 additional functions."       },       {         "number": "7",         "name": "PA1",         "type": "bidirectional",-        "description": "Port A pin 1, 5V tolerant I/O with ADC_IN1, comparator input, timer and USART alternate functions"+        "description": "PA1 I/O (FT) with EVENTOUT, TIM2_CH2, USART2_RTS/DE, TIM21_ETR and USART4_RX alternate functions, plus COMP1_INP and ADC_IN1 additional functions."       },       {         "number": "8",         "name": "PA2",         "type": "bidirectional",-        "description": "Port A pin 2, 5V tolerant I/O with ADC_IN2, USART2_TX, LPUART1_TX, comparator output"+        "description": "PA2 I/O (FT) with TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX and COMP2_OUT alternate functions, plus COMP2_INM and ADC_IN2 additional functions."       },       {         "number": "9",         "name": "PA3",         "type": "bidirectional",-        "description": "Port A pin 3, 5V tolerant I/O with ADC_IN3, USART2_RX, LPUART1_RX, comparator input"+        "description": "PA3 I/O (FT) with TIM21_CH2, TIM2_CH4, USART2_RX and LPUART1_RX alternate functions, plus COMP2_INP and ADC_IN3 additional functions."       },       {         "number": "10",         "name": "PA4",         "type": "bidirectional",-        "description": "Port A pin 4, 3.3V I/O with ADC_IN4, SPI1_NSS, timer and comparator inputs"+        "description": "PA4 I/O (TC) with SPI1_NSS, USART2_CK and TIM22_ETR alternate functions, plus COMP1_INM, COMP2_INM and ADC_IN4 additional functions."       },       {         "number": "11",         "name": "PA5",         "type": "bidirectional",-        "description": "Port A pin 5, 3.3V I/O with ADC_IN5, SPI1_SCK, timer and comparator inputs"+        "description": "PA5 I/O (TC) with SPI1_SCK, TIM2_ETR and TIM2_CH1 alternate functions, plus COMP1_INM, COMP2_INM and ADC_IN5 additional functions."       },       {         "number": "12",         "name": "PA6",         "type": "bidirectional",-        "description": "Port A pin 6, 5V tolerant I/O with ADC_IN6, SPI1_MISO, LPUART1_CTS, timer CH1, comparator output"+        "description": "PA6 I/O (FT) with SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT alternate functions, plus ADC_IN6."       },       {         "number": "13",         "name": "PA7",         "type": "bidirectional",-        "description": "Port A pin 7, 5V tolerant I/O with ADC_IN7, SPI1_MOSI, timer CH2, comparator output"+        "description": "PA7 I/O (FT) with SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT and COMP2_OUT alternate functions, plus ADC_IN7."       },       {         "number": "14",         "name": "PB0",         "type": "bidirectional",-        "description": "Port B pin 0, 5V tolerant I/O with ADC_IN8, timer CH3, reference voltage output capability"+        "description": "PB0 I/O (FT) with EVENTOUT and TIM3_CH3 alternate functions, plus ADC_IN8 and VREF_OUT additional functions."       },       {         "number": "15",         "name": "PB1",         "type": "bidirectional",-        "description": "Port B pin 1, 5V tolerant I/O with ADC_IN9, timer CH4, LPUART1_RTS/DE, reference voltage output"+        "description": "PB1 I/O (FT) with TIM3_CH4 and LPUART1_RTS/LPUART1_DE alternate functions, plus ADC_IN9 and VREF_OUT additional functions."       },       {         "number": "16",         "name": "VSS",         "type": "power_in",-        "description": "Ground reference supply pin, 0 V"+        "description": "Digital ground supply pin."       },       {         "number": "17",         "name": "VDD",         "type": "power_in",-        "description": "Main digital power supply pin, 1.65 to 3.6 V"+        "description": "Digital supply pin (1.65 V to 3.6 V device supply range)."       },       {         "number": "18",         "name": "PA8",         "type": "bidirectional",-        "description": "Port A pin 8, 5V tolerant FM+ I/O with microcontroller clock output, USART1_CK, I2C3_SCL"+        "description": "PA8 I/O (FTf, 5 V tolerant, Fast Mode Plus capable) with MCO, EVENTOUT, USART1_CK and I2C3_SCL alternate functions."       },       {         "number": "19",         "name": "PA9",         "type": "bidirectional",-        "description": "Port A pin 9, 5V tolerant FM+ I/O with microcontroller clock output, USART1_TX, I2C1_SCL, I2C3_SMBA"+        "description": "PA9 I/O (FTf, 5 V tolerant, Fast Mode Plus capable) with MCO, USART1_TX, I2C1_SCL and I2C3_SMBA alternate functions."       },       {         "number": "20",         "name": "PA10",         "type": "bidirectional",-        "description": "Port A pin 10, 5V tolerant FM+ I/O with USART1_RX, I2C1_SDA"+        "description": "PA10 I/O (FTf, 5 V tolerant, Fast Mode Plus capable) with USART1_RX and I2C1_SDA alternate functions."       },       {         "number": "21",         "name": "PA11",         "type": "bidirectional",-        "description": "Port A pin 11, 5V tolerant I/O supplied by VDDIO2, SPI1_MISO, USART1_CTS, comparator output"+        "description": "PA11 I/O (FT), supplied by VDDIO2, with SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT alternate functions."       },       {         "number": "22",         "name": "PA12",         "type": "bidirectional",-        "description": "Port A pin 12, 5V tolerant I/O supplied by VDDIO2, SPI1_MOSI, USART1_RTS/DE, comparator output"+        "description": "PA12 I/O (FT), supplied by VDDIO2, with SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE and COMP2_OUT alternate functions."       },       {         "number": "23",         "name": "PA13",         "type": "bidirectional",-        "description": "Port A pin 13, 5V tolerant I/O with SWDIO serial wire debug function, LPUART1_RX"+        "description": "PA13 I/O (FT) with SWDIO (serial wire debug data) and LPUART1_RX alternate functions."       },       {         "number": "24",         "name": "VDDIO2",         "type": "power_in",-        "description": "Independent I/O power supply for PA11 and PA12 pins, 1.65 to 3.6 V"+        "description": "Separate supply pin for the PA11 and PA12 I/Os."       },       {         "number": "25",         "name": "PA14",         "type": "bidirectional",-        "description": "Port A pin 14, 5V tolerant I/O with SWCLK serial wire debug function, USART2_TX, LPUART1_TX"+        "description": "PA14 I/O (FT) with SWCLK (serial wire debug clock), USART2_TX and LPUART1_TX alternate functions."       },       {         "number": "26",         "name": "PB4",         "type": "bidirectional",-        "description": "Port B pin 4, 5V tolerant FM+ I/O with SPI1_MISO, timer CH1, USART1_CTS, USART5_RX, I2C3_SDA, comparator input"+        "description": "PB4 I/O (FTf, 5 V tolerant, Fast Mode Plus capable) with SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA alternate functions, plus COMP2_INP."       },       {         "number": "27",         "name": "PB5",         "type": "bidirectional",-        "description": "Port B pin 5, 5V tolerant I/O with SPI1_MOSI, LPTIM1 inputs, I2C1_SMBA, timer channels, USART clocking, comparator input"+        "description": "PB5 I/O (FT) with SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/DE alternate functions, plus COMP2_INP."       },       {         "number": "28",         "name": "PB6",         "type": "bidirectional",-        "description": "Port B pin 6, 5V tolerant FM+ I/O with USART1_TX, I2C1_SCL, LPTIM1_ETR, comparator input"+        "description": "PB6 I/O (FTf, 5 V tolerant, Fast Mode Plus capable) with USART1_TX, I2C1_SCL and LPTIM1_ETR alternate functions, plus COMP2_INP."       },       {         "number": "29",         "name": "PB7",         "type": "bidirectional",-        "description": "Port B pin 7, 5V tolerant FM+ I/O with USART1_RX, I2C1_SDA, LPTIM1_IN2, comparator inputs and PVD function"+        "description": "PB7 I/O (FTf, 5 V tolerant, Fast Mode Plus capable) with USART1_RX, I2C1_SDA, LPTIM1_IN2 and USART4_CTS alternate functions, plus COMP2_INP and VREF_PVD_IN."       },       {         "number": "30",         "name": "BOOT0",         "type": "input",-        "description": "Dedicated boot mode selection input pin, determines boot source at power-on or reset"+        "description": "Dedicated boot mode selection input pin."       },       {         "number": "31",         "name": "VSS",         "type": "power_in",-        "description": "Ground reference supply pin, 0 V"+        "description": "Digital ground supply pin."       },       {         "number": "32",         "name": "VDD",         "type": "power_in",-        "description": "Main digital power supply pin, 1.65 to 3.6 V"+        "description": "Digital supply pin (1.65 V to 3.6 V device supply range)."       },       {         "number": "33",@@ -263,19 +266,21 @@       }     ],     "provenance": {-      "extractor": "extract_pins 0.2",+      "extractor": "extract_pins 0.3",       "factory_chain": {         "factory": "2.0.0",-        "extractor": "extract_pins 0.2",+        "extractor": "extract_pins 0.3",         "primary_model": "claude-haiku-4-5-20251001",         "primary_mode": "text",-        "consensus_model": "claude-sonnet-4-6",+        "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",-        "guard_notes": [],-        "pages_sent": 148,-        "cost_usd": 1.6856,-        "at": "2026-10-01T17:48:29"+        "guard_notes": [+          "extractor flagged: PA11 and PA12 are powered by separate VDDIO2 supply (pin 24) rather than main VDD; pins include alte; STM32L071KBU6 is specified for 'xB' variant (128 KB Flash); verification that all port E pins are no"+        ],+        "pages_sent": 74,+        "cost_usd": 0.4898,+        "at": "2026-10-01T18:14:12"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886724563120128",@@ -304,12 +309,12 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          5.0,-          5.0,+          5,+          5,           1.1         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "90af021df1253eae35bee4f4a4f9ba63bcf4a308f6e9f12d58f6e00181c23140",         "checked": "2026-10-07",@@ -335,5 +340,20 @@         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]-  }+  },+  "title": "STM32L071KBU6",+  "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "STMicroelectronics",+      "Package": "UFQFPN-32(5x5)",+      "Category": "Embedded Processors & Controllers",+      "Pins": "33"+    }+  },+  "discovery_triggers": [+    "stm32l071kbu6"+  ],+  "discovery_pitch": "STM32L071KBU6 (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",+  "visibility": "public" }
page.json+13−10
@@ -4,7 +4,7 @@   "slug": "stm32l071kbu6",   "title": "STM32L071KBU6",   "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -310,12 +310,12 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          5.0,-          5.0,+          5,+          5,           1.1         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "897bbbdd09107b767b96a9f172284445c1f6945f1cecf7104bbec9cb126e0a9d",         "checked": "2026-11-18",@@ -362,9 +362,12 @@     "docs/hero.png",     "docs/stm32l071kbu6-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "stm32l071kbu6-etched.step",+    "stm32l071kbu6-hero.glb",+    "stm32l071kbu6-hero.overlay.json"   ],-  "visibility": {-    "public": true-  }-}+  "visibility": "public",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
stm32l071kbu6-hero.glbadded
⋯ 1 unchanged line ⋯
stm32l071kbu6-hero.overlay.jsonadded+801
@@ -0,0 +1,801 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "STM32L071KBU6",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 33,+      "span_mm": 8.375,+      "dash_mm": 0.2094,+      "gap_mm": 0.1256,+      "pad_stroke_mm": 0.0503+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 32,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.46,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -2.5,+      2.5,+      -2.5,+      2.5+    ],+    "pads_bbox_mm": [+      -2.875,+      2.875,+      -2.875,+      2.875+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "stm32l071kbu6-etched.glb",+    "glb_sha256": "09dae6fb68f12c5701ac9087bc8d2b924b25266e88163988a3d88b12157b1b19",+    "footprint": "stm32l071kbu6.kicad_mod",+    "footprint_sha256": "33c22382f224a9eb823bd99b8cf2c0bc75a2fa3588609586bdfe240986cb7125",+    "pins": "page.json component.pins",+    "pins_sha256": "8bf13db32288f28bb0dc3cc0547bf0636e809dec3b4c8126b7c2ce23475a425b"+  },+  "generator": "adom-wiki 1.8.28 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "PC14-OSC32_IN",+      "x": -3.57,+      "y": -1.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "2",+      "text": "PC15-OSC32_OUT",+      "x": -2.975,+      "y": -1.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "NRST",+      "x": -2.975,+      "y": -0.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "VSSA",+      "x": -2.975,+      "y": -0.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "VDDA",+      "x": -2.975,+      "y": 0.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "PA0",+      "x": -2.975,+      "y": 0.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "PA1",+      "x": -2.975,+      "y": 1.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "PA2",+      "x": -2.975,+      "y": 1.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "PA3",+      "x": -1.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "PA4",+      "x": -1.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "11",+      "text": "PA5",+      "x": -0.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "12",+      "text": "PA6",+      "x": -0.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "PA7",+      "x": 0.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "PB0",+      "x": 0.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "PB1",+      "x": 1.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "VSS",+      "x": 1.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "VDD",+      "x": 2.975,+      "y": 1.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "PA8",+      "x": 2.975,+      "y": 1.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "PA9",+      "x": 2.975,+      "y": 0.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "PA10",+      "x": 2.975,+      "y": 0.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "21",+      "text": "PA11",+      "x": 2.975,+      "y": -0.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "22",+      "text": "PA12",+      "x": 2.975,+      "y": -0.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "23",+      "text": "PA13",+      "x": 2.975,+      "y": -1.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "24",+      "text": "VDDIO2",+      "x": 2.975,+      "y": -1.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "25",+      "text": "PA14",+      "x": 1.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "26",+      "text": "PB4",+      "x": 1.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "27",+      "text": "PB5",+      "x": 0.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "28",+      "text": "PB6",+      "x": 0.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "29",+      "text": "PB7",+      "x": -0.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "30",+      "text": "BOOT0",+      "x": -0.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "31",+      "text": "VSS",+      "x": -1.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "32",+      "text": "VDD",+      "x": -1.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "30",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "31",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "32",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "33",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        3.5,+        3.5+      ],+      "rot": 0.0+    }+  ]+}