← Commit history

Initial commit: component/stm32l011f3p6tr

Ray ·d8545a8552 ·
2 files changed +285
README.mdadded+56
@@ -0,0 +1,56 @@+# STM32L011F3P6TR++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · TSSOP-20++STM32L011F3P6TR from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PB9-BOOT0 | input | Dedicated BOOT0 pin (input-only); selects boot memory (Flash, System memory, or embedded RAM) on device reset. |+| 2 | PC14-OSC32_IN | bidirectional | Port C pin 14; low-speed external oscillator (LSE) input for 32.768 kHz crystal connection; configurable as general-purpose I/O. |+| 3 | PC15-OSC32_OUT | bidirectional | Port C pin 15; low-speed external oscillator (LSE) output for 32.768 kHz crystal connection; configurable as standard 3.3 V I/O. |+| 4 | NRST | bidirectional | Active-low reset input/output with embedded weak pull-up (45 kΩ typical); Schmitt trigger threshold 0.3VDD; provides device reset functionality. |+| 5 | VDDA | power_in | Analog power supply pin (1.65 V to 3.6 V); supplies power to ADC, comparators, reference voltage, and PLL; must be decoupled with 100 nF capacitor. |+| 6 | PA0-CK_IN | bidirectional | Port A pin 0 (TTa type, ADC-connected fast channel); supports USART2_RX, LPTIM1_IN1, TIM2_CH1, USART2_CTS, TIM2_ETR, LPUART1_RX, COMP1_OUT alternate functions and ADC_IN0, COMP1_INM additional functions. |+| 7 | PA1 | bidirectional | Port A pin 1 (5 V tolerant); supports EVENTOUT, LPTIM1_IN2, TIM2_CH2, I2C1_SMBA, USART2_RTS_DE, TIM21_ETR, LPUART1_TX alternate functions and ADC_IN1, COMP1_INP additional functions. |+| 8 | PA2 | bidirectional | Port A pin 2 (TTa type, ADC-connected standard channel); supports TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX, COMP2_OUT alternate functions and ADC_IN2, COMP2_INM additional functions. |+| 9 | PA3 | bidirectional | Port A pin 3 (5 V tolerant); supports TIM21_CH2, TIM2_CH4, USART2_RX, LPUART1_RX alternate functions and ADC_IN3, COMP2_INP additional functions. |+| 10 | PA4 | bidirectional | Port A pin 4 (TTa type, ADC-connected fast channel); supports SPI1_NSS, LPTIM1_IN1, LPTIM1_ETR, I2C1_SCL, USART2_CK, TIM2_ETR, LPUART1_TX, COMP2_OUT alternate functions and ADC_IN4 additional functions. |+| 11 | PA5 | bidirectional | Port A pin 5 (TTa type, ADC-connected fast channel); supports SPI1_SCK, LPTIM1_IN2, TIM2_ETR, TIM2_CH1 alternate functions and ADC_IN5 additional functions. |+| 12 | PA6 | bidirectional | Port A pin 6 (5 V tolerant); supports SPI1_MISO, LPTIM1_ETR, LPUART1_CTS, EVENTOUT, COMP1_OUT alternate functions and ADC_IN6 additional functions. |+| 13 | PA7 | bidirectional | Port A pin 7 (5 V tolerant); supports SPI1_MOSI, LPTIM1_OUT, USART2_CTS, TIM21_ETR, EVENTOUT, COMP2_OUT alternate functions and ADC_IN7, COMP2_INP additional functions. |+| 14 | PB1 | bidirectional | Port B pin 1 (5 V tolerant); supports USART2_CK, SPI1_MOSI, LPTIM1_IN1, LPUART1_RTS_DE, TIM2_CH4 alternate functions and ADC_IN9, VREF_OUT additional functions. |+| 15 | VSS | power_in | Digital and analog ground return; common return path for all VDD and VDDA pins; must be connected to system ground plane. |+| 16 | VDD | power_in | Digital power supply pin (1.65 V to 3.6 V with BOR disabled; 1.8 V to 3.6 V with BOR enabled); must be decoupled with 100 nF capacitor placed close to package. |+| 17 | PA9 | bidirectional | Port A pin 9 (5 V tolerant, FM+ I2C capable); supports MCO, I2C1_SCL, LPTIM1_OUT, USART2_TX, TIM21_CH2, COMP1_OUT alternate functions. |+| 18 | PA10 | bidirectional | Port A pin 10 (5 V tolerant, FM+ I2C capable, acts as SWCLK); supports TIM21_CH1, I2C1_SDA, RTC_REFIN, USART2_RX, TIM2_CH3, COMP1_OUT alternate functions. |+| 19 | PA13 | bidirectional | Port A pin 13 (5 V tolerant, FM+ I2C capable, acts as SWDIO); supports SWDIO, LPTIM1_ETR, I2C1_SDA, SPI1_SCK, LPUART1_RX, COMP1_OUT alternate functions. |+| 20 | PA14 | bidirectional | Port A pin 14 (5 V tolerant, acts as SWCLK); supports SWCLK, LPTIM1_OUT, I2C1_SMBA, USART2_TX, SPI1_MISO, LPUART1_TX, COMP2_OUT alternate functions. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TSSOP-20 |+| Category | Embedded Processors & Controllers |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `STM32L011F3P6TR`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `stm32l011f3p6tr-etched.step` / `stm32l011f3p6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l011f3p6tr.step` / `stm32l011f3p6tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922536113950721) (119 pp, sha256 `1271aa38a181c7a2`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32l011f3p6tr-datasheet.pdf)
page.jsonadded+229
@@ -0,0 +1,229 @@+{+  "slug": "stm32l011f3p6tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), TSSOP-20. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32l011f3p6tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32l011f3p6tr.kicad_sym",+    "stm32l011f3p6tr.kicad_mod",+    "stm32l011f3p6tr.glb",+    "stm32l011f3p6tr.step",+    "stm32l011f3p6tr.lbr",+    "docs/hero.png",+    "docs/stm32l011f3p6tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32L011F3P6TR",+    "manufacturer": "STMicroelectronics",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922536113950721",+    "parts": {+      "symbol": "stm32l011f3p6tr.kicad_sym",+      "footprint": "stm32l011f3p6tr.kicad_mod",+      "model_3d": "stm32l011f3p6tr-etched.glb",+      "model_3d_plain": "stm32l011f3p6tr.glb",+      "model_3d_step": "stm32l011f3p6tr-etched.step",+      "model_3d_step_plain": "stm32l011f3p6tr.step",+      "lbr": "stm32l011f3p6tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2053132",+      "digikey": "497-18799-2-ND",+      "mouser": "511-STM32L011F3P6TR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T13:08:52Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-18799-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32L011F3P6TR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "PB9-BOOT0",+        "type": "input",+        "description": "Dedicated BOOT0 pin (input-only); selects boot memory (Flash, System memory, or embedded RAM) on device reset."+      },+      {+        "number": "2",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "Port C pin 14; low-speed external oscillator (LSE) input for 32.768 kHz crystal connection; configurable as general-purpose I/O."+      },+      {+        "number": "3",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "Port C pin 15; low-speed external oscillator (LSE) output for 32.768 kHz crystal connection; configurable as standard 3.3 V I/O."+      },+      {+        "number": "4",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active-low reset input/output with embedded weak pull-up (45 kΩ typical); Schmitt trigger threshold 0.3VDD; provides device reset functionality."+      },+      {+        "number": "5",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin (1.65 V to 3.6 V); supplies power to ADC, comparators, reference voltage, and PLL; must be decoupled with 100 nF capacitor."+      },+      {+        "number": "6",+        "name": "PA0-CK_IN",+        "type": "bidirectional",+        "description": "Port A pin 0 (TTa type, ADC-connected fast channel); supports USART2_RX, LPTIM1_IN1, TIM2_CH1, USART2_CTS, TIM2_ETR, LPUART1_RX, COMP1_OUT alternate functions and ADC_IN0, COMP1_INM additional functions."+      },+      {+        "number": "7",+        "name": "PA1",+        "type": "bidirectional",+        "description": "Port A pin 1 (5 V tolerant); supports EVENTOUT, LPTIM1_IN2, TIM2_CH2, I2C1_SMBA, USART2_RTS_DE, TIM21_ETR, LPUART1_TX alternate functions and ADC_IN1, COMP1_INP additional functions."+      },+      {+        "number": "8",+        "name": "PA2",+        "type": "bidirectional",+        "description": "Port A pin 2 (TTa type, ADC-connected standard channel); supports TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX, COMP2_OUT alternate functions and ADC_IN2, COMP2_INM additional functions."+      },+      {+        "number": "9",+        "name": "PA3",+        "type": "bidirectional",+        "description": "Port A pin 3 (5 V tolerant); supports TIM21_CH2, TIM2_CH4, USART2_RX, LPUART1_RX alternate functions and ADC_IN3, COMP2_INP additional functions."+      },+      {+        "number": "10",+        "name": "PA4",+        "type": "bidirectional",+        "description": "Port A pin 4 (TTa type, ADC-connected fast channel); supports SPI1_NSS, LPTIM1_IN1, LPTIM1_ETR, I2C1_SCL, USART2_CK, TIM2_ETR, LPUART1_TX, COMP2_OUT alternate functions and ADC_IN4 additional functions."+      },+      {+        "number": "11",+        "name": "PA5",+        "type": "bidirectional",+        "description": "Port A pin 5 (TTa type, ADC-connected fast channel); supports SPI1_SCK, LPTIM1_IN2, TIM2_ETR, TIM2_CH1 alternate functions and ADC_IN5 additional functions."+      },+      {+        "number": "12",+        "name": "PA6",+        "type": "bidirectional",+        "description": "Port A pin 6 (5 V tolerant); supports SPI1_MISO, LPTIM1_ETR, LPUART1_CTS, EVENTOUT, COMP1_OUT alternate functions and ADC_IN6 additional functions."+      },+      {+        "number": "13",+        "name": "PA7",+        "type": "bidirectional",+        "description": "Port A pin 7 (5 V tolerant); supports SPI1_MOSI, LPTIM1_OUT, USART2_CTS, TIM21_ETR, EVENTOUT, COMP2_OUT alternate functions and ADC_IN7, COMP2_INP additional functions."+      },+      {+        "number": "14",+        "name": "PB1",+        "type": "bidirectional",+        "description": "Port B pin 1 (5 V tolerant); supports USART2_CK, SPI1_MOSI, LPTIM1_IN1, LPUART1_RTS_DE, TIM2_CH4 alternate functions and ADC_IN9, VREF_OUT additional functions."+      },+      {+        "number": "15",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital and analog ground return; common return path for all VDD and VDDA pins; must be connected to system ground plane."+      },+      {+        "number": "16",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.65 V to 3.6 V with BOR disabled; 1.8 V to 3.6 V with BOR enabled); must be decoupled with 100 nF capacitor placed close to package."+      },+      {+        "number": "17",+        "name": "PA9",+        "type": "bidirectional",+        "description": "Port A pin 9 (5 V tolerant, FM+ I2C capable); supports MCO, I2C1_SCL, LPTIM1_OUT, USART2_TX, TIM21_CH2, COMP1_OUT alternate functions."+      },+      {+        "number": "18",+        "name": "PA10",+        "type": "bidirectional",+        "description": "Port A pin 10 (5 V tolerant, FM+ I2C capable, acts as SWCLK); supports TIM21_CH1, I2C1_SDA, RTC_REFIN, USART2_RX, TIM2_CH3, COMP1_OUT alternate functions."+      },+      {+        "number": "19",+        "name": "PA13",+        "type": "bidirectional",+        "description": "Port A pin 13 (5 V tolerant, FM+ I2C capable, acts as SWDIO); supports SWDIO, LPTIM1_ETR, I2C1_SDA, SPI1_SCK, LPUART1_RX, COMP1_OUT alternate functions."+      },+      {+        "number": "20",+        "name": "PA14",+        "type": "bidirectional",+        "description": "Port A pin 14 (5 V tolerant, acts as SWCLK); supports SWCLK, LPTIM1_OUT, I2C1_SMBA, USART2_TX, SPI1_MISO, LPUART1_TX, COMP2_OUT alternate functions."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PC14 and PC15 oscillator pins are not present in all package variants; VDDA is internally connected ; PA10 note 7 and PA14 note 7 on page 39 contain important bootloader programming information for TSSO"+        ],+        "pages_sent": 119,+        "cost_usd": 1.0437,+        "at": "2026-09-27T13:08:31"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922536113950721",+        "pages": 119,+        "sha256": "1271aa38a181c7a2",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file