component
STM32H563ZIT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-144(20x20). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+180@@ -0,0 +1,180 @@+# STM32H563ZIT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-144(20x20)++STM32H563ZIT6 from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACECLK, LPTIM1_IN2, SAI1_CK1, SPI4_SCK, SAI1_MCLK_A, USART10_RX, UART8_TX, OCTOSPI1_IO2, ETH_MII_TXD3, FMC_A23, DCMI_D3/PSSI_D3, EVENTOUT. |+| 2 | PE3 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX, FMC_A19, EVENTOUT with tamper input/output capability. |+| 3 | PE4 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED1, SAI1_D2, TIM15_CH1N, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4/PSSI_D4, EVENTOUT with tamper input/output capability. |+| 4 | PE5 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6/PSSI_D6, EVENTOUT with tamper input/output capability. |+| 5 | PE6 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCLK_B, FMC_A22, DCMI_D7/PSSI_D7, EVENTOUT with tamper input/output capability. |+| 6 | VBAT | power_in | Battery supply voltage (1.71 to 3.6 V) for backup domain and RTC operation. |+| 7 | PC13 | bidirectional | General-purpose I/O pin supplied through power switch with tamper input/output and RTC functions, max output speed 2 MHz with 30 pF load. |+| 8 | PC14-OSC32_IN | bidirectional | 32 kHz oscillator input pin with alternate function OSC32_IN for RTC clock source. |+| 9 | PC15-OSC32_OUT | bidirectional | 32 kHz oscillator output pin with alternate function OSC32_OUT for RTC clock source. |+| 10 | PF0 | bidirectional | General-purpose I/O pin with I2C2_SDA, FMC_A0, LPTIM5_CH1 alternate functions. |+| 11 | PF1 | bidirectional | General-purpose I/O pin with I2C2_SCL, FMC_A1, LPTIM5_CH2 alternate functions. |+| 12 | PH0-OSC_IN | bidirectional | High-speed external oscillator input pin (4-50 MHz) with alternate function OSC_IN. |+| 13 | PH1-OSC_OUT | bidirectional | High-speed external oscillator output pin with alternate function OSC_OUT. |+| 14 | NRST | bidirectional | Reset pin with embedded weak pull-up resistor; active low. |+| 15 | PC0 | bidirectional | General-purpose I/O pin with analog switch (supplied by VDDA) and ADC12_INP10 analog input capability. |+| 16 | PC1 | bidirectional | General-purpose I/O pin with analog switch and ADC12_INP11, ADC12_INN10 analog inputs and tamper/wakeup capability. |+| 17 | PC2 | bidirectional | General-purpose I/O pin with ADC12_INP12, ADC12_INN11 analog inputs and power control functions. |+| 18 | PC3 | bidirectional | General-purpose I/O pin with ADC12_INP13, ADC12_INN12 analog inputs and power control functions. |+| 19 | VSSA | power_in | Analog domain ground reference; must be connected to VSS. |+| 20 | VREF- | power_in | Negative analog reference voltage for ADC/DAC (typically connected to VSSA). |+| 21 | VREF+ | power_in | Positive analog reference voltage for ADC/DAC (1.62 to 3.6 V, typically 3.3 V). |+| 22 | VDDA | power_in | Analog power supply (1.62 to 3.6 V); must be decoupled with 100 nF ceramic capacitor. |+| 23 | VDD | power_in | Main digital power supply (1.71 to 3.6 V); must be decoupled close to pin. |+| 24 | PF2 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_CH2, LPTIM3_IN2, I2C2_SMBA, UART12_TX, USART11_CK, FMC_A2, LPTIM5_IN1. |+| 25 | PF3 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_IN1, USART11_TX, FMC_A3, LPTIM5_IN2. |+| 26 | PF4 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_ETR, USART11_RX, FMC_A4. |+| 27 | PF5 | output | General-purpose I/O pin with Fm+ capability (high-speed low-voltage mode) and alternate functions for LPTIM3_CH1, I2C4_SCL, I3C1_SCL, UART12_RX, USART11_CTS/NSS, FMC_A5, LPTIM3_IN1. |+| 28 | PH2 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM1_IN2, OCTOSPI1_IO4, SAI2_SCK_B, ETH_MII_CRS, FMC_SDCKE0. |+| 29 | PH3 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for OCTOSPI1_IO5, SAI2_MCLK_B, ETH_MII_COL, FMC_SDNE0. |+| 30 | PH4 | bidirectional | General-purpose I/O pin with I2C2_SCL, SPI5_RDY, SPI6_RDY, PSSI_D14 alternate functions. |+| 31 | PH5 | bidirectional | General-purpose I/O pin with I2C2_SDA, SPI5_NSS, SPI6_RDY, FMC_SDNWE alternate functions. |+| 32 | PA0 | bidirectional | General-purpose I/O pin with analog switch and ADC12_INP0, ADC12_INN1 analog inputs, tamper input/output and wakeup capability. |+| 33 | PA1 | bidirectional | General-purpose I/O pin with analog switch and ADC12_INP1 analog input, tamper input/output capability (Fm+ capable). |+| 34 | PA2 | bidirectional | General-purpose I/O pin with analog switch and ADC12_INP14 analog input, tamper input/output and wakeup capability (Fm+ capable). |+| 35 | PA3 | bidirectional | General-purpose I/O pin with ADC12_INP15 analog input and alternate functions for OCTOSPI1_CLK, TIM15_CH2. |+| 36 | VSS | power_in | Digital ground; must be connected to all VSS pins for proper return path. |+| 37 | VDD | power_in | Main digital power supply (1.71 to 3.6 V); must be decoupled close to pin. |+| 38 | PA4 | bidirectional | General-purpose I/O (3.6V tolerant) with ADC12_INP18 and DAC1_OUT1 (12-bit) analog functions. |+| 39 | PA5 | bidirectional | General-purpose I/O (3.6V tolerant, Fm+ capable) with ADC12_INP19, ADC12_INN18 and DAC1_OUT2 (12-bit) analog functions. |+| 40 | PA6 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC12_INP3 analog input and alternate functions for SPI1_MISO, OCTOSPI1_IO3, USART11_TX, SPI6_MISO, TIM13_CH1, DCMI_PIXCLK/PSSI_PDCK. |+| 41 | PA7 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC12_INP7, ADC12_INN3 analog inputs and alternate functions for SPI1_MOSI, USART11_RX, SPI6_MOSI, TIM14_CH1, OCTOSPI1_IO2, ETH_MII_RX_DV/ETH_RMII_CRS_DV, FMC_SDNWE, FMC_NWE. |+| 42 | PC4 | bidirectional | General-purpose I/O pin with ADC12_INP4 analog input and alternate functions for TIM2_CH4, SAI1_CK1, LPTIM2_ETR, I2S1_MCK, USART3_RX, ETH_MII_RXD0/ETH_RMII_RXD0, FMC_SDNE0. |+| 43 | PC5 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC12_INP8, ADC12_INN4 analog inputs and alternate functions for TIM1_CH4N, SAI1_D3, PSSI_D15, SAI1_FS_A, UART12_RTS, OCTOSPI1_DQS, ETH_MII_RXD1/ETH_RMII_RXD1, FMC_SDCKE0. |+| 44 | PB0 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC12_INP9, ADC12_INN5 analog inputs and alternate functions for TIM1_CH2N, TIM3_CH3, TIM8_CH2N, OCTOSPI1_IO1, USART11_CK, UART4_CTS, ETH_MII_RXD2, LPTIM3_CH1. |+| 45 | PB1 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC12_INP5 analog input and alternate functions for TIM1_CH3N, TIM3_CH4, TIM8_CH3N, OCTOSPI1_IO0, ETH_MII_RXD3, LPTIM3_CH2. |+| 46 | PB2 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for RTC_OUT2, SAI1_D1, TIM8_CH4N, SPI1_RDY, LPTIM1_CH1, SAI1_SD_A, SPI3_MOSI/I2S3_SDO, OCTOSPI1_CLK, OCTOSPI1_DQS, SDMMC1_CMD, LPTIM5_ETR; outputs LSCO signal. |+| 47 | PF11 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC1_INP2 analog input and alternate functions for SPI5_MOSI, OCTOSPI1_NCLK, SAI2_SD_B, FMC_NRAS, DCMI_D12/PSSI_D12, LPTIM6_CH1. |+| 48 | PF12 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC1_INP6, ADC1_INN2 analog inputs and alternate functions for FMC_A6, LPTIM6_CH2. |+| 49 | PF13 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC2_INP2 analog input and alternate functions for I2C4_SMBA, FMC_A7, LPTIM6_IN1. |+| 50 | PF14 | bidirectional | General-purpose I/O pin (Fm+ capable) with ADC2_INP6, ADC2_INN2 analog inputs and alternate functions for FMC_A8, LPTIM6_IN2. |+| 51 | PF15 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for I2C4_SDA, I3C1_SDA, FMC_A9. |+| 52 | PG0 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for UART9_RX, FMC_A10, LPTIM4_IN1. |+| 53 | PG1 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for SPI2_MOSI/I2S2_SDO, UART9_TX, FMC_A11. |+| 54 | PE7 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_ETR, UART12_RTS, UART7_RX, OCTOSPI1_IO4, FMC_D4/FMC_AD4. |+| 55 | PE8 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH1N, UART12_CTS/UART12_NSS, UART7_TX, OCTOSPI1_IO5, FMC_D5/FMC_AD5. |+| 56 | PE9 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH1, UART12_RX, UART7_RTS, OCTOSPI1_IO6, FMC_D6/FMC_AD6. |+| 57 | PE10 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH2N, UART12_TX, UART7_CTS, OCTOSPI1_IO7, FMC_D7/FMC_AD7. |+| 58 | PE11 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH2, SPI1_RDY, SPI4_NSS, OCTOSPI1_NCS, SAI2_SD_B, FMC_D8/FMC_AD8. |+| 59 | PE12 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH3N, SPI4_SCK, SAI2_SCK_B, FMC_D9/FMC_AD9. |+| 60 | PE13 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH3, SPI4_MISO, SAI2_FS_B, FMC_D10/FMC_AD10. |+| 61 | PE14 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11/FMC_AD11. |+| 62 | PE15 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_BKIN, TIM1_CH4N, USART10_CK, FMC_D12/FMC_AD12. |+| 63 | PB10 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM2_CH3, LPTIM3_CH1, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OCTOSPI1_NCS, ETH_MII_RX_ER. |+| 64 | PB11 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM2_CH4, LPTIM2_ETR, I2C2_SDA, SPI2_RDY, SPI4_RDY, USART3_RX, ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NBL1. |+| 65 | PB12 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_BKIN, OCTOSPI1_NCLK, I2C2_SDA, SPI2_NSS/I2S2_WS, UCPD1_FRSTX, USART3_CK, FDCAN2_RX, ETH_MII_TXD0/ETH_RMII_TXD0, UART5_RX. |+| 66 | PB13 | bidirectional | General-purpose I/O (USB Type-C power delivery function) with alternate functions for TIM1_CH1N, LPTIM3_IN1, LPTIM2_CH1, I2C2_SMBA, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX, SDMMC1_D0, UART5_TX; UCPD1_CC1. |+| 67 | PB14 | bidirectional | General-purpose I/O (USB Type-C power delivery function) with alternate functions for TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0, LPTIM3_ETR; UCPD1_CC2. |+| 68 | PB15 | bidirectional | General-purpose I/O pin with alternate functions for RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, USART11_CTS/USART11_NSS, UART4_CTS, SDMMC2_D1, OCTOSPI1_CLK, ETH_MII_TXD1/ETH_RMII_TXD1, DCMI_D2/PSSI_D2, UART5_RX; PVD_IN. |+| 69 | PD0 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH4N, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_AD2. |+| 70 | PD1 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for UART4_TX, FDCAN1_TX, FMC_D3/FMC_AD3. |+| 71 | PD2 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD, DCMI_D11/PSSI_D11, LPTIM4_ETR; wakeup capability. |+| 72 | PD3 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5; wakeup capability. |+| 73 | PD4 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for USART2_RTS, OCTOSPI1_IO4, FMC_NOE. |+| 74 | PD5 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH4N, SPI2_RDY, USART2_TX, FDCAN1_TX, OCTOSPI1_IO5, FMC_NWE. |+| 75 | PD6 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for SAI1_D1, SPI3_MOSI/I2S3_SDO, SAI1_SD_A, USART2_RX, OCTOSPI1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10. |+| 76 | PD7 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for SPI1_MOSI/I2S1_SDO, USART2_CK, OCTOSPI1_IO7, SDMMC2_CMD, FMC_NE1/FMC_NCE, LPTIM4_OUT. |+| 77 | PG2 | output | General-purpose I/O pin supplied by VDDIO2 with alternate functions for TIM8_BKIN, UART12_RX, FMC_A12, LPTIM6_ETR. |+| 78 | PG3 | output | General-purpose I/O pin supplied by VDDIO2 with alternate functions for TIM8_BKIN2, UART12_TX, FMC_A13, LPTIM5_ETR. |+| 79 | PG4 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_BKIN2, FMC_A14/FMC_BA0, LPTIM4_ETR. |+| 80 | PG5 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_ETR, FMC_A15/FMC_BA1. |+| 81 | PG6 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM17_BKIN, I3C1_SDA, I2C4_SDA, SPI1_RDY, OCTOSPI1_NCS, UCPD1_FRSTX, FMC_NE3, DCMI_D12/PSSI_D12. |+| 82 | PG7 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for SAI1_CK2, I3C1_SCL, I2C4_SCL, SAI1_MCLK_A, USART6_CK, UCPD1_FRSTX, FMC_INT, DCMI_D13/PSSI_D13. |+| 83 | PG8 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_ETR, SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK. |+| 84 | VSS | power_in | Digital ground; must be connected to all VSS pins for proper return path. |+| 85 | VDD | power_in | Main digital power supply (1.71 to 3.6 V); must be decoupled close to pin. |+| 86 | PC6 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM3_CH1, TIM8_CH1, I2S2_MCK, SAI1_SCK_A, USART6_TX, SDMMC1_D0DIR, FMC_NWAIT, SDMMC2_D6, OCTOSPI1_IO5, SDMMC1_D6, DCMI_D0/PSSI_D0. |+| 87 | PC7 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC1_D123DIR, FMC_NE1, SDMMC2_D7, OCTOSPI1_IO6, SDMMC1_D7, DCMI_D1/PSSI_D1. |+| 88 | PC8 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT, FMC_ALE, SDMMC1_D0, DCMI_D2/PSSI_D2. |+| 89 | PC9 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, AUDIOCLK, UART5_CTS, OCTOSPI1_IO0, FMC_CLE, SDMMC1_D1, DCMI_D3/PSSI_D3; UCPD1_DB2. |+| 90 | PA8 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, SPI1_RDY, USART1_CK, USB_SOF, UART7_RX, FMC_NOE, DCMI_D3/PSSI_D3. |+| 91 | PA9 | bidirectional | General-purpose I/O (USB dead battery function) with alternate functions for TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, ETH_MII_TX_ER, FMC_NWE, DCMI_D0/PSSI_D0; UCPD1_DB1. |+| 92 | PA10 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH3, LPUART1_RX, LPTIM2_IN2, UCPD1_FRSTX, USART1_RX, FDCAN2_TX, SDMMC1_D0, DCMI_D1/PSSI_D1. |+| 93 | PA11 | bidirectional | General-purpose I/O (USB function, supplied by VDDUSB) with alternate functions for TIM1_CH4, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX, USB_DM. |+| 94 | PA12 | bidirectional | General-purpose I/O (USB function, supplied by VDDUSB) with alternate functions for TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX, USB_DP. |+| 95 | PA13 | bidirectional | Debug pin (JTMS/SWDIO) with internal pull-up and alternate function EVENTOUT; can be used as GPIO when debug disabled. |+| 96 | VDDUSB | power_in | USB 2.0 full-speed device/host supply (3.0 to 3.6 V); must be decoupled with 100 nF ceramic capacitor. |+| 97 | PC10 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_ETR, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPI1_IO1, ETH_MII_TXD0/ETH_RMII_TXD0, SDMMC1_D2, DCMI_D8/PSSI_D8. |+| 98 | PC11 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_IN1, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPI1_NCS, SDMMC1_D3, DCMI_D4/PSSI_D4. |+| 99 | PC12 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED3, TIM15_CH1, SPI6_SCK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9/PSSI_D9. |+| 100 | PA14 | bidirectional | Debug pin (JTCK/SWCLK) with internal pull-down and alternate function EVENTOUT; can be used as GPIO when debug disabled. |+| 101 | PA15 | bidirectional | Debug pin (JTDI) with internal pull-up and alternate functions for TIM2_CH1, LPTIM3_IN2, HDMI_CEC, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, SPI6_NSS, UART4_RTS, UART7_TX, FMC_NBL1, DCMI_D11/PSSI_D11, TIM2_ETR; can be used as GPIO when debug disabled. |+| 102 | PD0 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH4N, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_AD2. |+| 103 | PD1 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for UART4_TX, FDCAN1_TX, FMC_D3/FMC_AD3. |+| 104 | PD2 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD, DCMI_D11/PSSI_D11, LPTIM4_ETR; wakeup capability. |+| 105 | PD3 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5; wakeup capability. |+| 106 | PD4 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for USART2_RTS, OCTOSPI1_IO4, FMC_NOE. |+| 107 | PD5 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH4N, SPI2_RDY, USART2_TX, FDCAN1_TX, OCTOSPI1_IO5, FMC_NWE. |+| 108 | PD6 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for SAI1_D1, SPI3_MOSI/I2S3_SDO, SAI1_SD_A, USART2_RX, OCTOSPI1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10. |+| 109 | PD7 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for SPI1_MOSI/I2S1_SDO, USART2_CK, OCTOSPI1_IO7, SDMMC2_CMD, FMC_NE1/FMC_NCE, LPTIM4_OUT. |+| 110 | PG9 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for SPI1_MISO/I2S1_SDI, USART6_RX, OCTOSPI1_IO6, SAI2_FS_B, SDMMC2_D0, FMC_NE2/FMC_NCE, DCMI_VSYNC/PSSI_RDY. |+| 111 | PG10 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for SPI1_NSS/I2S1_WS, SAI2_SD_B, SDMMC2_D1, FMC_NE3, DCMI_D2/PSSI_D2. |+| 112 | PG11 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for LPTIM1_IN2, SPI1_SCK/I2S1_CK, USART10_RX, USART11_RTS, SDMMC2_D2, ETH_MII_TX_EN/ETH_RMII_TX_EN, DCMI_D3/PSSI_D3. |+| 113 | PG12 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for LPTIM1_IN1, PSSI_D15, SPI6_MISO, USART10_TX, USART6_RTS, SDMMC2_D3, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_NE4, DCMI_D11/PSSI_D11, LPTIM5_CH1. |+| 114 | PG13 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for TRACED0, LPTIM1_CH1, SPI6_SCK, USART10_CTS/USART10_NSS, USART6_CTS/USART6_NSS, SDMMC2_D6, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, LPTIM5_CH2. |+| 115 | PG14 | bidirectional | General-purpose I/O pin supplied by VDDIO2 with alternate functions for TRACED1, LPTIM1_ETR, LPTIM1_CH2, SPI6_MOSI, USART10_RTS, USART6_TX, OCTOSPI1_IO7, SDMMC2_D7, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, LPTIM5_IN1. |+| 116 | PG15 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for SPI4_RDY, USART10_CK, USART6_CTS/USART6_NSS, FMC_NCAS, DCMI_D13/PSSI_D13. |+| 117 | PH6 | output | General-purpose I/O pin with alternate functions for TIM1_CH3N, TIM12_CH1, TIM8_CH1, I2C2_SMBA, SPI5_SCK, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8/PSSI_D8. |+| 118 | PH7 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH3, TIM8_CH1N, I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9/PSSI_D9. |+| 119 | PH8 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH2N, TIM5_ETR, TIM8_CH2, I2C3_SDA, SPI5_MOSI, DCMI_HSYNC/PSSI_DE. |+| 120 | PH9 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH2, TIM12_CH2, TIM8_CH2N, I2C3_SMBA, SPI5_NSS, DCMI_D0/PSSI_D0. |+| 121 | PH10 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH1N, TIM5_CH1, TIM8_CH3, I2C4_SMBA, SPI5_RDY, DCMI_D1/PSSI_D1. |+| 122 | PH11 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH1, TIM5_CH2, TIM8_CH3N, I2C4_SCL, I3C1_SCL, DCMI_D2/PSSI_D2. |+| 123 | PH12 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_BKIN, TIM5_CH3, TIM8_BKIN, I2C4_SDA, I3C1_SDA, TIM8_CH4N, DCMI_D3/PSSI_D3. |+| 124 | PH13 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM1_IN2, TIM8_CH1N, UART8_TX, UART4_TX, FDCAN1_TX, DCMI_D3/PSSI_D3. |+| 125 | PH14 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH2N, UART4_RX, FDCAN1_RX, DCMI_D4/PSSI_D4. |+| 126 | PH15 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH3N, DCMI_D11/PSSI_D11. |+| 127 | PI0 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM5_CH4, SPI2_NSS/I2S2_WS, DCMI_D13/PSSI_D13. |+| 128 | PI1 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_BKIN2, SPI2_SCK/I2S2_CK, DCMI_D8/PSSI_D8. |+| 129 | PI2 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH4, SPI2_MISO/I2S2_SDI, DCMI_D9/PSSI_D9. |+| 130 | PI3 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_ETR, SPI2_MOSI/I2S2_SDO, DCMI_D10/PSSI_D10. |+| 131 | VSS | power_in | Digital ground; must be connected to all VSS pins for proper return path. |+| 132 | VDD | power_in | Main digital power supply (1.71 to 3.6 V); must be decoupled close to pin. |+| 133 | PB3 | bidirectional | Debug pin (JTDO/TRACESWO) (Fm+ capable) with alternate functions for TIM2_CH2, I2C2_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, UART12_CTS/UART12_NSS, SPI6_SCK, SDMMC2_D2, CRS_SYNC, UART7_RX, LPTIM6_ETR; can be used as GPIO when debug disabled. |+| 134 | PB4 | bidirectional | Debug pin (NJTRST) with alternate functions for TIM16_BKIN, TIM3_CH1, OCTOSPI1_CLK, LPTIM1_CH2, SPI1_MISO/I2S1_SDI, SPI3_MISO/I2S3_SDI, SPI2_NSS/I2S2_WS, SPI6_MISO, SDMMC2_D3, UART7_TX, DCMI_D7/PSSI_D7; can be used as GPIO when debug disabled. |+| 135 | PB5 | bidirectional | General-purpose I/O pin with alternate functions for TIM17_BKIN, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, I2C4_SMBA, SPI3_MOSI/I2S3_SDO, SPI6_MOSI, FDCAN2_RX, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10/PSSI_D10, UART5_RX. |+| 136 | PB6 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM16_CH1N, TIM4_CH1, I3C1_SCL, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPI1_NCS, FMC_SDNE1, DCMI_D5/PSSI_D5, UART5_TX. |+| 137 | PB7 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM17_CH1N, TIM4_CH2, I3C1_SDA, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, FDCAN1_TX, SDMMC2_D5, SDMMC2_CKIN, FMC_NL, DCMI_VSYNC/PSSI_RDY; wakeup capability. |+| 138 | BOOT0 | input | Boot mode selection pin; when held high at reset, device boots from system memory instead of flash; weak internal pull-down active. |+| 139 | PB8 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM16_CH1, TIM4_CH3, I3C1_SCL, I2C1_SCL, SPI4_RDY, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX, SDMMC2_D4, ETH_MII_TXD3, SDMMC1_D4, DCMI_D6/PSSI_D6. |+| 140 | PB9 | bidirectional | General-purpose I/O pin (Fm+ capable) with alternate functions for TIM17_CH1, TIM4_CH4, I3C1_SDA, I2C1_SDA, SPI2_NSS/I2S2_WS, I2C4_SDA, SDMMC1_CDIR, UART4_TX, FDCAN1_TX, SDMMC2_D5, SDMMC2_CKIN, SDMMC1_D5, DCMI_D7/PSSI_D7. |+| 141 | PE0 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM1_ETR, TIM4_ETR, LPTIM2_CH2, LPTIM2_ETR, SPI3_RDY, UART8_RX, FDCAN1_RX, SAI2_MCLK_A, FMC_NBL0, DCMI_D2/PSSI_D2. |+| 142 | PE1 | output | General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM1_IN2, UART8_TX, FDCAN1_TX, FMC_NBL1, DCMI_D3/PSSI_D3. |+| 143 | VCAP | passive | External capacitor pin for internal voltage regulator (LDO) output filtering; requires 1 µF to 10 µF low-ESR ceramic capacitor. |+| 144 | VSS | power_in | Digital ground; must be connected to all VSS pins for proper return path. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-144(20x20) |+| Category | Embedded Processors & Controllers |+| Pins | 144 |++## CAD (KiCad official)++- Symbol: `STM32H563ZIT6`+- Footprint: `Package_QFP:LQFP-144_20x20mm_P0.5mm`+- 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)+- 3D model files: `stm32h563zit6-etched.step` / `stm32h563zit6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32h563zit6.step` / `stm32h563zit6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903110321848320) (275 pp, sha256 `6b589cc54d9e8a1f`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32h563zit6-datasheet.pdf)
page.jsonadded+944@@ -0,0 +1,944 @@+{+ "slug": "stm32h563zit6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-144(20x20). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32h563zit6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32h563zit6.kicad_sym",+ "stm32h563zit6.kicad_mod",+ "stm32h563zit6.glb",+ "stm32h563zit6.step",+ "stm32h563zit6.lbr",+ "docs/hero.png",+ "docs/stm32h563zit6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32H563ZIT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-144(20x20)",+ "pin_count": 144,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903110321848320",+ "parts": {+ "symbol": "stm32h563zit6.kicad_sym",+ "footprint": "stm32h563zit6.kicad_mod",+ "model_3d": "stm32h563zit6-etched.glb",+ "model_3d_plain": "stm32h563zit6.glb",+ "model_3d_step": "stm32h563zit6-etched.step",+ "model_3d_step_plain": "stm32h563zit6.step",+ "lbr": "stm32h563zit6.lbr"+ },+ "distributor_links": {+ "lcsc": "C6807803"+ },+ "pins": [+ {+ "number": "1",+ "name": "PE2",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACECLK, LPTIM1_IN2, SAI1_CK1, SPI4_SCK, SAI1_MCLK_A, USART10_RX, UART8_TX, OCTOSPI1_IO2, ETH_MII_TXD3, FMC_A23, DCMI_D3/PSSI_D3, EVENTOUT."+ },+ {+ "number": "2",+ "name": "PE3",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX, FMC_A19, EVENTOUT with tamper input/output capability."+ },+ {+ "number": "3",+ "name": "PE4",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED1, SAI1_D2, TIM15_CH1N, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4/PSSI_D4, EVENTOUT with tamper input/output capability."+ },+ {+ "number": "4",+ "name": "PE5",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6/PSSI_D6, EVENTOUT with tamper input/output capability."+ },+ {+ "number": "5",+ "name": "PE6",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCLK_B, FMC_A22, DCMI_D7/PSSI_D7, EVENTOUT with tamper input/output capability."+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery supply voltage (1.71 to 3.6 V) for backup domain and RTC operation."+ },+ {+ "number": "7",+ "name": "PC13",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied through power switch with tamper input/output and RTC functions, max output speed 2 MHz with 30 pF load."+ },+ {+ "number": "8",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "32 kHz oscillator input pin with alternate function OSC32_IN for RTC clock source."+ },+ {+ "number": "9",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "32 kHz oscillator output pin with alternate function OSC32_OUT for RTC clock source."+ },+ {+ "number": "10",+ "name": "PF0",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with I2C2_SDA, FMC_A0, LPTIM5_CH1 alternate functions."+ },+ {+ "number": "11",+ "name": "PF1",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with I2C2_SCL, FMC_A1, LPTIM5_CH2 alternate functions."+ },+ {+ "number": "12",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "High-speed external oscillator input pin (4-50 MHz) with alternate function OSC_IN."+ },+ {+ "number": "13",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "High-speed external oscillator output pin with alternate function OSC_OUT."+ },+ {+ "number": "14",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Reset pin with embedded weak pull-up resistor; active low."+ },+ {+ "number": "15",+ "name": "PC0",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with analog switch (supplied by VDDA) and ADC12_INP10 analog input capability."+ },+ {+ "number": "16",+ "name": "PC1",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with analog switch and ADC12_INP11, ADC12_INN10 analog inputs and tamper/wakeup capability."+ },+ {+ "number": "17",+ "name": "PC2",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with ADC12_INP12, ADC12_INN11 analog inputs and power control functions."+ },+ {+ "number": "18",+ "name": "PC3",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with ADC12_INP13, ADC12_INN12 analog inputs and power control functions."+ },+ {+ "number": "19",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog domain ground reference; must be connected to VSS."+ },+ {+ "number": "20",+ "name": "VREF-",+ "type": "power_in",+ "description": "Negative analog reference voltage for ADC/DAC (typically connected to VSSA)."+ },+ {+ "number": "21",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive analog reference voltage for ADC/DAC (1.62 to 3.6 V, typically 3.3 V)."+ },+ {+ "number": "22",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply (1.62 to 3.6 V); must be decoupled with 100 nF ceramic capacitor."+ },+ {+ "number": "23",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply (1.71 to 3.6 V); must be decoupled close to pin."+ },+ {+ "number": "24",+ "name": "PF2",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_CH2, LPTIM3_IN2, I2C2_SMBA, UART12_TX, USART11_CK, FMC_A2, LPTIM5_IN1."+ },+ {+ "number": "25",+ "name": "PF3",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_IN1, USART11_TX, FMC_A3, LPTIM5_IN2."+ },+ {+ "number": "26",+ "name": "PF4",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_ETR, USART11_RX, FMC_A4."+ },+ {+ "number": "27",+ "name": "PF5",+ "type": "output",+ "description": "General-purpose I/O pin with Fm+ capability (high-speed low-voltage mode) and alternate functions for LPTIM3_CH1, I2C4_SCL, I3C1_SCL, UART12_RX, USART11_CTS/NSS, FMC_A5, LPTIM3_IN1."+ },+ {+ "number": "28",+ "name": "PH2",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM1_IN2, OCTOSPI1_IO4, SAI2_SCK_B, ETH_MII_CRS, FMC_SDCKE0."+ },+ {+ "number": "29",+ "name": "PH3",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for OCTOSPI1_IO5, SAI2_MCLK_B, ETH_MII_COL, FMC_SDNE0."+ },+ {+ "number": "30",+ "name": "PH4",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with I2C2_SCL, SPI5_RDY, SPI6_RDY, PSSI_D14 alternate functions."+ },+ {+ "number": "31",+ "name": "PH5",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with I2C2_SDA, SPI5_NSS, SPI6_RDY, FMC_SDNWE alternate functions."+ },+ {+ "number": "32",+ "name": "PA0",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with analog switch and ADC12_INP0, ADC12_INN1 analog inputs, tamper input/output and wakeup capability."+ },+ {+ "number": "33",+ "name": "PA1",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with analog switch and ADC12_INP1 analog input, tamper input/output capability (Fm+ capable)."+ },+ {+ "number": "34",+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with analog switch and ADC12_INP14 analog input, tamper input/output and wakeup capability (Fm+ capable)."+ },+ {+ "number": "35",+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with ADC12_INP15 analog input and alternate functions for OCTOSPI1_CLK, TIM15_CH2."+ },+ {+ "number": "36",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground; must be connected to all VSS pins for proper return path."+ },+ {+ "number": "37",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply (1.71 to 3.6 V); must be decoupled close to pin."+ },+ {+ "number": "38",+ "name": "PA4",+ "type": "bidirectional",+ "description": "General-purpose I/O (3.6V tolerant) with ADC12_INP18 and DAC1_OUT1 (12-bit) analog functions."+ },+ {+ "number": "39",+ "name": "PA5",+ "type": "bidirectional",+ "description": "General-purpose I/O (3.6V tolerant, Fm+ capable) with ADC12_INP19, ADC12_INN18 and DAC1_OUT2 (12-bit) analog functions."+ },+ {+ "number": "40",+ "name": "PA6",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC12_INP3 analog input and alternate functions for SPI1_MISO, OCTOSPI1_IO3, USART11_TX, SPI6_MISO, TIM13_CH1, DCMI_PIXCLK/PSSI_PDCK."+ },+ {+ "number": "41",+ "name": "PA7",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC12_INP7, ADC12_INN3 analog inputs and alternate functions for SPI1_MOSI, USART11_RX, SPI6_MOSI, TIM14_CH1, OCTOSPI1_IO2, ETH_MII_RX_DV/ETH_RMII_CRS_DV, FMC_SDNWE, FMC_NWE."+ },+ {+ "number": "42",+ "name": "PC4",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with ADC12_INP4 analog input and alternate functions for TIM2_CH4, SAI1_CK1, LPTIM2_ETR, I2S1_MCK, USART3_RX, ETH_MII_RXD0/ETH_RMII_RXD0, FMC_SDNE0."+ },+ {+ "number": "43",+ "name": "PC5",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC12_INP8, ADC12_INN4 analog inputs and alternate functions for TIM1_CH4N, SAI1_D3, PSSI_D15, SAI1_FS_A, UART12_RTS, OCTOSPI1_DQS, ETH_MII_RXD1/ETH_RMII_RXD1, FMC_SDCKE0."+ },+ {+ "number": "44",+ "name": "PB0",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC12_INP9, ADC12_INN5 analog inputs and alternate functions for TIM1_CH2N, TIM3_CH3, TIM8_CH2N, OCTOSPI1_IO1, USART11_CK, UART4_CTS, ETH_MII_RXD2, LPTIM3_CH1."+ },+ {+ "number": "45",+ "name": "PB1",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC12_INP5 analog input and alternate functions for TIM1_CH3N, TIM3_CH4, TIM8_CH3N, OCTOSPI1_IO0, ETH_MII_RXD3, LPTIM3_CH2."+ },+ {+ "number": "46",+ "name": "PB2",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for RTC_OUT2, SAI1_D1, TIM8_CH4N, SPI1_RDY, LPTIM1_CH1, SAI1_SD_A, SPI3_MOSI/I2S3_SDO, OCTOSPI1_CLK, OCTOSPI1_DQS, SDMMC1_CMD, LPTIM5_ETR; outputs LSCO signal."+ },+ {+ "number": "47",+ "name": "PF11",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC1_INP2 analog input and alternate functions for SPI5_MOSI, OCTOSPI1_NCLK, SAI2_SD_B, FMC_NRAS, DCMI_D12/PSSI_D12, LPTIM6_CH1."+ },+ {+ "number": "48",+ "name": "PF12",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC1_INP6, ADC1_INN2 analog inputs and alternate functions for FMC_A6, LPTIM6_CH2."+ },+ {+ "number": "49",+ "name": "PF13",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC2_INP2 analog input and alternate functions for I2C4_SMBA, FMC_A7, LPTIM6_IN1."+ },+ {+ "number": "50",+ "name": "PF14",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with ADC2_INP6, ADC2_INN2 analog inputs and alternate functions for FMC_A8, LPTIM6_IN2."+ },+ {+ "number": "51",+ "name": "PF15",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for I2C4_SDA, I3C1_SDA, FMC_A9."+ },+ {+ "number": "52",+ "name": "PG0",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for UART9_RX, FMC_A10, LPTIM4_IN1."+ },+ {+ "number": "53",+ "name": "PG1",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for SPI2_MOSI/I2S2_SDO, UART9_TX, FMC_A11."+ },+ {+ "number": "54",+ "name": "PE7",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_ETR, UART12_RTS, UART7_RX, OCTOSPI1_IO4, FMC_D4/FMC_AD4."+ },+ {+ "number": "55",+ "name": "PE8",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH1N, UART12_CTS/UART12_NSS, UART7_TX, OCTOSPI1_IO5, FMC_D5/FMC_AD5."+ },+ {+ "number": "56",+ "name": "PE9",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH1, UART12_RX, UART7_RTS, OCTOSPI1_IO6, FMC_D6/FMC_AD6."+ },+ {+ "number": "57",+ "name": "PE10",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH2N, UART12_TX, UART7_CTS, OCTOSPI1_IO7, FMC_D7/FMC_AD7."+ },+ {+ "number": "58",+ "name": "PE11",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH2, SPI1_RDY, SPI4_NSS, OCTOSPI1_NCS, SAI2_SD_B, FMC_D8/FMC_AD8."+ },+ {+ "number": "59",+ "name": "PE12",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH3N, SPI4_SCK, SAI2_SCK_B, FMC_D9/FMC_AD9."+ },+ {+ "number": "60",+ "name": "PE13",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH3, SPI4_MISO, SAI2_FS_B, FMC_D10/FMC_AD10."+ },+ {+ "number": "61",+ "name": "PE14",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11/FMC_AD11."+ },+ {+ "number": "62",+ "name": "PE15",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_BKIN, TIM1_CH4N, USART10_CK, FMC_D12/FMC_AD12."+ },+ {+ "number": "63",+ "name": "PB10",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM2_CH3, LPTIM3_CH1, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OCTOSPI1_NCS, ETH_MII_RX_ER."+ },+ {+ "number": "64",+ "name": "PB11",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM2_CH4, LPTIM2_ETR, I2C2_SDA, SPI2_RDY, SPI4_RDY, USART3_RX, ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NBL1."+ },+ {+ "number": "65",+ "name": "PB12",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_BKIN, OCTOSPI1_NCLK, I2C2_SDA, SPI2_NSS/I2S2_WS, UCPD1_FRSTX, USART3_CK, FDCAN2_RX, ETH_MII_TXD0/ETH_RMII_TXD0, UART5_RX."+ },+ {+ "number": "66",+ "name": "PB13",+ "type": "bidirectional",+ "description": "General-purpose I/O (USB Type-C power delivery function) with alternate functions for TIM1_CH1N, LPTIM3_IN1, LPTIM2_CH1, I2C2_SMBA, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX, SDMMC1_D0, UART5_TX; UCPD1_CC1."+ },+ {+ "number": "67",+ "name": "PB14",+ "type": "bidirectional",+ "description": "General-purpose I/O (USB Type-C power delivery function) with alternate functions for TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0, LPTIM3_ETR; UCPD1_CC2."+ },+ {+ "number": "68",+ "name": "PB15",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with alternate functions for RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, USART11_CTS/USART11_NSS, UART4_CTS, SDMMC2_D1, OCTOSPI1_CLK, ETH_MII_TXD1/ETH_RMII_TXD1, DCMI_D2/PSSI_D2, UART5_RX; PVD_IN."+ },+ {+ "number": "69",+ "name": "PD0",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH4N, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_AD2."+ },+ {+ "number": "70",+ "name": "PD1",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for UART4_TX, FDCAN1_TX, FMC_D3/FMC_AD3."+ },+ {+ "number": "71",+ "name": "PD2",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD, DCMI_D11/PSSI_D11, LPTIM4_ETR; wakeup capability."+ },+ {+ "number": "72",+ "name": "PD3",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5; wakeup capability."+ },+ {+ "number": "73",+ "name": "PD4",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for USART2_RTS, OCTOSPI1_IO4, FMC_NOE."+ },+ {+ "number": "74",+ "name": "PD5",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH4N, SPI2_RDY, USART2_TX, FDCAN1_TX, OCTOSPI1_IO5, FMC_NWE."+ },+ {+ "number": "75",+ "name": "PD6",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for SAI1_D1, SPI3_MOSI/I2S3_SDO, SAI1_SD_A, USART2_RX, OCTOSPI1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10."+ },+ {+ "number": "76",+ "name": "PD7",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for SPI1_MOSI/I2S1_SDO, USART2_CK, OCTOSPI1_IO7, SDMMC2_CMD, FMC_NE1/FMC_NCE, LPTIM4_OUT."+ },+ {+ "number": "77",+ "name": "PG2",+ "type": "output",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for TIM8_BKIN, UART12_RX, FMC_A12, LPTIM6_ETR."+ },+ {+ "number": "78",+ "name": "PG3",+ "type": "output",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for TIM8_BKIN2, UART12_TX, FMC_A13, LPTIM5_ETR."+ },+ {+ "number": "79",+ "name": "PG4",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_BKIN2, FMC_A14/FMC_BA0, LPTIM4_ETR."+ },+ {+ "number": "80",+ "name": "PG5",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_ETR, FMC_A15/FMC_BA1."+ },+ {+ "number": "81",+ "name": "PG6",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM17_BKIN, I3C1_SDA, I2C4_SDA, SPI1_RDY, OCTOSPI1_NCS, UCPD1_FRSTX, FMC_NE3, DCMI_D12/PSSI_D12."+ },+ {+ "number": "82",+ "name": "PG7",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for SAI1_CK2, I3C1_SCL, I2C4_SCL, SAI1_MCLK_A, USART6_CK, UCPD1_FRSTX, FMC_INT, DCMI_D13/PSSI_D13."+ },+ {+ "number": "83",+ "name": "PG8",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_ETR, SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK."+ },+ {+ "number": "84",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground; must be connected to all VSS pins for proper return path."+ },+ {+ "number": "85",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply (1.71 to 3.6 V); must be decoupled close to pin."+ },+ {+ "number": "86",+ "name": "PC6",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM3_CH1, TIM8_CH1, I2S2_MCK, SAI1_SCK_A, USART6_TX, SDMMC1_D0DIR, FMC_NWAIT, SDMMC2_D6, OCTOSPI1_IO5, SDMMC1_D6, DCMI_D0/PSSI_D0."+ },+ {+ "number": "87",+ "name": "PC7",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC1_D123DIR, FMC_NE1, SDMMC2_D7, OCTOSPI1_IO6, SDMMC1_D7, DCMI_D1/PSSI_D1."+ },+ {+ "number": "88",+ "name": "PC8",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT, FMC_ALE, SDMMC1_D0, DCMI_D2/PSSI_D2."+ },+ {+ "number": "89",+ "name": "PC9",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, AUDIOCLK, UART5_CTS, OCTOSPI1_IO0, FMC_CLE, SDMMC1_D1, DCMI_D3/PSSI_D3; UCPD1_DB2."+ },+ {+ "number": "90",+ "name": "PA8",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, SPI1_RDY, USART1_CK, USB_SOF, UART7_RX, FMC_NOE, DCMI_D3/PSSI_D3."+ },+ {+ "number": "91",+ "name": "PA9",+ "type": "bidirectional",+ "description": "General-purpose I/O (USB dead battery function) with alternate functions for TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, ETH_MII_TX_ER, FMC_NWE, DCMI_D0/PSSI_D0; UCPD1_DB1."+ },+ {+ "number": "92",+ "name": "PA10",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH3, LPUART1_RX, LPTIM2_IN2, UCPD1_FRSTX, USART1_RX, FDCAN2_TX, SDMMC1_D0, DCMI_D1/PSSI_D1."+ },+ {+ "number": "93",+ "name": "PA11",+ "type": "bidirectional",+ "description": "General-purpose I/O (USB function, supplied by VDDUSB) with alternate functions for TIM1_CH4, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX, USB_DM."+ },+ {+ "number": "94",+ "name": "PA12",+ "type": "bidirectional",+ "description": "General-purpose I/O (USB function, supplied by VDDUSB) with alternate functions for TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX, USB_DP."+ },+ {+ "number": "95",+ "name": "PA13",+ "type": "bidirectional",+ "description": "Debug pin (JTMS/SWDIO) with internal pull-up and alternate function EVENTOUT; can be used as GPIO when debug disabled."+ },+ {+ "number": "96",+ "name": "VDDUSB",+ "type": "power_in",+ "description": "USB 2.0 full-speed device/host supply (3.0 to 3.6 V); must be decoupled with 100 nF ceramic capacitor."+ },+ {+ "number": "97",+ "name": "PC10",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_ETR, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPI1_IO1, ETH_MII_TXD0/ETH_RMII_TXD0, SDMMC1_D2, DCMI_D8/PSSI_D8."+ },+ {+ "number": "98",+ "name": "PC11",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM3_IN1, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPI1_NCS, SDMMC1_D3, DCMI_D4/PSSI_D4."+ },+ {+ "number": "99",+ "name": "PC12",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED3, TIM15_CH1, SPI6_SCK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9/PSSI_D9."+ },+ {+ "number": "100",+ "name": "PA14",+ "type": "bidirectional",+ "description": "Debug pin (JTCK/SWCLK) with internal pull-down and alternate function EVENTOUT; can be used as GPIO when debug disabled."+ },+ {+ "number": "101",+ "name": "PA15",+ "type": "bidirectional",+ "description": "Debug pin (JTDI) with internal pull-up and alternate functions for TIM2_CH1, LPTIM3_IN2, HDMI_CEC, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, SPI6_NSS, UART4_RTS, UART7_TX, FMC_NBL1, DCMI_D11/PSSI_D11, TIM2_ETR; can be used as GPIO when debug disabled."+ },+ {+ "number": "102",+ "name": "PD0",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH4N, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_AD2."+ },+ {+ "number": "103",+ "name": "PD1",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for UART4_TX, FDCAN1_TX, FMC_D3/FMC_AD3."+ },+ {+ "number": "104",+ "name": "PD2",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD, DCMI_D11/PSSI_D11, LPTIM4_ETR; wakeup capability."+ },+ {+ "number": "105",+ "name": "PD3",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5; wakeup capability."+ },+ {+ "number": "106",+ "name": "PD4",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for USART2_RTS, OCTOSPI1_IO4, FMC_NOE."+ },+ {+ "number": "107",+ "name": "PD5",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH4N, SPI2_RDY, USART2_TX, FDCAN1_TX, OCTOSPI1_IO5, FMC_NWE."+ },+ {+ "number": "108",+ "name": "PD6",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for SAI1_D1, SPI3_MOSI/I2S3_SDO, SAI1_SD_A, USART2_RX, OCTOSPI1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10."+ },+ {+ "number": "109",+ "name": "PD7",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for SPI1_MOSI/I2S1_SDO, USART2_CK, OCTOSPI1_IO7, SDMMC2_CMD, FMC_NE1/FMC_NCE, LPTIM4_OUT."+ },+ {+ "number": "110",+ "name": "PG9",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for SPI1_MISO/I2S1_SDI, USART6_RX, OCTOSPI1_IO6, SAI2_FS_B, SDMMC2_D0, FMC_NE2/FMC_NCE, DCMI_VSYNC/PSSI_RDY."+ },+ {+ "number": "111",+ "name": "PG10",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for SPI1_NSS/I2S1_WS, SAI2_SD_B, SDMMC2_D1, FMC_NE3, DCMI_D2/PSSI_D2."+ },+ {+ "number": "112",+ "name": "PG11",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for LPTIM1_IN2, SPI1_SCK/I2S1_CK, USART10_RX, USART11_RTS, SDMMC2_D2, ETH_MII_TX_EN/ETH_RMII_TX_EN, DCMI_D3/PSSI_D3."+ },+ {+ "number": "113",+ "name": "PG12",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for LPTIM1_IN1, PSSI_D15, SPI6_MISO, USART10_TX, USART6_RTS, SDMMC2_D3, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_NE4, DCMI_D11/PSSI_D11, LPTIM5_CH1."+ },+ {+ "number": "114",+ "name": "PG13",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for TRACED0, LPTIM1_CH1, SPI6_SCK, USART10_CTS/USART10_NSS, USART6_CTS/USART6_NSS, SDMMC2_D6, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, LPTIM5_CH2."+ },+ {+ "number": "115",+ "name": "PG14",+ "type": "bidirectional",+ "description": "General-purpose I/O pin supplied by VDDIO2 with alternate functions for TRACED1, LPTIM1_ETR, LPTIM1_CH2, SPI6_MOSI, USART10_RTS, USART6_TX, OCTOSPI1_IO7, SDMMC2_D7, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, LPTIM5_IN1."+ },+ {+ "number": "116",+ "name": "PG15",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for SPI4_RDY, USART10_CK, USART6_CTS/USART6_NSS, FMC_NCAS, DCMI_D13/PSSI_D13."+ },+ {+ "number": "117",+ "name": "PH6",+ "type": "output",+ "description": "General-purpose I/O pin with alternate functions for TIM1_CH3N, TIM12_CH1, TIM8_CH1, I2C2_SMBA, SPI5_SCK, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8/PSSI_D8."+ },+ {+ "number": "118",+ "name": "PH7",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH3, TIM8_CH1N, I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9/PSSI_D9."+ },+ {+ "number": "119",+ "name": "PH8",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH2N, TIM5_ETR, TIM8_CH2, I2C3_SDA, SPI5_MOSI, DCMI_HSYNC/PSSI_DE."+ },+ {+ "number": "120",+ "name": "PH9",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH2, TIM12_CH2, TIM8_CH2N, I2C3_SMBA, SPI5_NSS, DCMI_D0/PSSI_D0."+ },+ {+ "number": "121",+ "name": "PH10",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM1_CH1N, TIM5_CH1, TIM8_CH3, I2C4_SMBA, SPI5_RDY, DCMI_D1/PSSI_D1."+ },+ {+ "number": "122",+ "name": "PH11",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_CH1, TIM5_CH2, TIM8_CH3N, I2C4_SCL, I3C1_SCL, DCMI_D2/PSSI_D2."+ },+ {+ "number": "123",+ "name": "PH12",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM1_BKIN, TIM5_CH3, TIM8_BKIN, I2C4_SDA, I3C1_SDA, TIM8_CH4N, DCMI_D3/PSSI_D3."+ },+ {+ "number": "124",+ "name": "PH13",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM1_IN2, TIM8_CH1N, UART8_TX, UART4_TX, FDCAN1_TX, DCMI_D3/PSSI_D3."+ },+ {+ "number": "125",+ "name": "PH14",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH2N, UART4_RX, FDCAN1_RX, DCMI_D4/PSSI_D4."+ },+ {+ "number": "126",+ "name": "PH15",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH3N, DCMI_D11/PSSI_D11."+ },+ {+ "number": "127",+ "name": "PI0",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM5_CH4, SPI2_NSS/I2S2_WS, DCMI_D13/PSSI_D13."+ },+ {+ "number": "128",+ "name": "PI1",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_BKIN2, SPI2_SCK/I2S2_CK, DCMI_D8/PSSI_D8."+ },+ {+ "number": "129",+ "name": "PI2",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_CH4, SPI2_MISO/I2S2_SDI, DCMI_D9/PSSI_D9."+ },+ {+ "number": "130",+ "name": "PI3",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for TIM8_ETR, SPI2_MOSI/I2S2_SDO, DCMI_D10/PSSI_D10."+ },+ {+ "number": "131",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground; must be connected to all VSS pins for proper return path."+ },+ {+ "number": "132",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply (1.71 to 3.6 V); must be decoupled close to pin."+ },+ {+ "number": "133",+ "name": "PB3",+ "type": "bidirectional",+ "description": "Debug pin (JTDO/TRACESWO) (Fm+ capable) with alternate functions for TIM2_CH2, I2C2_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, UART12_CTS/UART12_NSS, SPI6_SCK, SDMMC2_D2, CRS_SYNC, UART7_RX, LPTIM6_ETR; can be used as GPIO when debug disabled."+ },+ {+ "number": "134",+ "name": "PB4",+ "type": "bidirectional",+ "description": "Debug pin (NJTRST) with alternate functions for TIM16_BKIN, TIM3_CH1, OCTOSPI1_CLK, LPTIM1_CH2, SPI1_MISO/I2S1_SDI, SPI3_MISO/I2S3_SDI, SPI2_NSS/I2S2_WS, SPI6_MISO, SDMMC2_D3, UART7_TX, DCMI_D7/PSSI_D7; can be used as GPIO when debug disabled."+ },+ {+ "number": "135",+ "name": "PB5",+ "type": "bidirectional",+ "description": "General-purpose I/O pin with alternate functions for TIM17_BKIN, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, I2C4_SMBA, SPI3_MOSI/I2S3_SDO, SPI6_MOSI, FDCAN2_RX, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10/PSSI_D10, UART5_RX."+ },+ {+ "number": "136",+ "name": "PB6",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM16_CH1N, TIM4_CH1, I3C1_SCL, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPI1_NCS, FMC_SDNE1, DCMI_D5/PSSI_D5, UART5_TX."+ },+ {+ "number": "137",+ "name": "PB7",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM17_CH1N, TIM4_CH2, I3C1_SDA, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, FDCAN1_TX, SDMMC2_D5, SDMMC2_CKIN, FMC_NL, DCMI_VSYNC/PSSI_RDY; wakeup capability."+ },+ {+ "number": "138",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection pin; when held high at reset, device boots from system memory instead of flash; weak internal pull-down active."+ },+ {+ "number": "139",+ "name": "PB8",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM16_CH1, TIM4_CH3, I3C1_SCL, I2C1_SCL, SPI4_RDY, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX, SDMMC2_D4, ETH_MII_TXD3, SDMMC1_D4, DCMI_D6/PSSI_D6."+ },+ {+ "number": "140",+ "name": "PB9",+ "type": "bidirectional",+ "description": "General-purpose I/O pin (Fm+ capable) with alternate functions for TIM17_CH1, TIM4_CH4, I3C1_SDA, I2C1_SDA, SPI2_NSS/I2S2_WS, I2C4_SDA, SDMMC1_CDIR, UART4_TX, FDCAN1_TX, SDMMC2_D5, SDMMC2_CKIN, SDMMC1_D5, DCMI_D7/PSSI_D7."+ },+ {+ "number": "141",+ "name": "PE0",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM1_ETR, TIM4_ETR, LPTIM2_CH2, LPTIM2_ETR, SPI3_RDY, UART8_RX, FDCAN1_RX, SAI2_MCLK_A, FMC_NBL0, DCMI_D2/PSSI_D2."+ },+ {+ "number": "142",+ "name": "PE1",+ "type": "output",+ "description": "General-purpose I/O pin with high-speed low-voltage mode and alternate functions for LPTIM1_IN2, UART8_TX, FDCAN1_TX, FMC_NBL1, DCMI_D3/PSSI_D3."+ },+ {+ "number": "143",+ "name": "VCAP",+ "type": "passive",+ "description": "External capacitor pin for internal voltage regulator (LDO) output filtering; requires 1 µF to 10 µF low-ESR ceramic capacitor."+ },+ {+ "number": "144",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground; must be connected to all VSS pins for proper return path."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903110321848320",+ "pages": 275,+ "sha256": "6b589cc54d9e8a1f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 144,+ "described": 144,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}