component
STM32H563VIT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+136@@ -0,0 +1,136 @@+# STM32H563VIT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32H563VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, OCTOSPI1_IO2, ETH_MII_TXD3, FMC_A23 and DCMI_D3/PSSI_D3. |+| 2 | PE3 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX and FMC_A19; additional function TAMP_IN6/TAMP_OUT3. |+| 3 | PE4 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED1, SAI1_D2, TIM15_CH1N, SPI4_NSS, FMC_A20 and DCMI_D4/PSSI_D4; additional function TAMP_IN7/TAMP_OUT8. |+| 4 | PE5 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, FMC_A21 and DCMI_D6/PSSI_D6; additional function TAMP_IN8/TAMP_OUT7. |+| 5 | PE6 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI2_MCLK_B and FMC_A22; additional function TAMP_IN3/TAMP_OUT6. |+| 6 | VBAT | power_in | Backup-domain supply for the RTC and 32 backup registers; absolute maximum range is -0.3 V to 4.0 V relative to VSS. |+| 7 | PC13 | bidirectional | 5 V-tolerant FT_t I/O supplied through the power switch (VSW); output speed must not exceed 2 MHz with a 30 pF load and it must not be used as a current source; functional as tamper input/output in VBAT and Standby; additional functions TAMP_IN1/TAMP_OUT2, RTC_OUT1/RTC_TS and WKUP4. |+| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant FT I/O supplied through the power switch with the same 2 MHz / 30 pF output limit as PC13; also the LSE oscillator input (OSC32_IN). |+| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant FT I/O supplied through the power switch with the same 2 MHz / 30 pF output limit as PC13; also the LSE oscillator output (OSC32_OUT). |+| 10 | VSS | power_in | Ground pin of the digital domain; all VSS pins must be connected to ground. |+| 11 | VDD | power_in | Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0) or 1.71 V to 2.7 V (HSLV=1), absolute maximum -0.3 V to 4.0 V. |+| 12 | PH0-OSC_IN | bidirectional | 5 V-tolerant FT I/O; also the HSE oscillator input (OSC_IN) for 4-50 MHz external clock or crystal. |+| 13 | PH1-OSC_OUT | bidirectional | 5 V-tolerant FT I/O; also the HSE oscillator output (OSC_OUT). |+| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |+| 15 | PC0 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function supplied by VDDA; alternate functions include TIM16_BKIN, SAI1_MCLK_A, SPI2_RDY, FMC_A25 and OCTOSPI1_IO7; additional function ADC12_INP10. |+| 16 | PC1 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TRACED0, SAI1_SD_A, SPI2_MOSI/I2S2_SDO, SDMMC2_CK and ETH_MDC; additional functions ADC12_INP11/ADC12_INN10, TAMP_IN3/TAMP_OUT5 and WKUP6. |+| 17 | PC2 | bidirectional | 5 V-tolerant FT_a I/O with analog switch supplied by VDDA; alternate functions include PWR_CSLEEP, TIM17_CH1, SPI2_MISO/I2S2_SDI, OCTOSPI1_IO5, ETH_MII_TXD2 and FMC_SDNE0; additional functions ADC12_INP12/ADC12_INN11. |+| 18 | PC3 | bidirectional | 5 V-tolerant FT_a I/O with analog switch supplied by VDDA; alternate functions include PWR_CSTOP, SAI1_D3, LPTIM3_CH1, SPI2_MOSI/I2S2_SDO, OCTOSPI1_IO6 and FMC_SDCKE0; additional functions ADC12_INP13/ADC12_INN12. |+| 19 | VSSA | power_in | Analog ground for ADC, DAC and the analog reference blocks. |+| 20 | VREF- | power_in | Negative voltage reference pin listed as a supply pin in the pin table; the datasheet gives no further limits for this pin in the pinout section. |+| 21 | VREF+ | power_in | Positive voltage reference input for the ADC/DAC, rated within the -0.3 V to 4.0 V external supply range; when the VREF+ pad is absent the internal VREFBUF must stay disabled (VREF+ is present on this package). |+| 22 | VDDA | power_in | Analog supply for ADC, DAC, reference and analog switches; absolute maximum -0.3 V to 4.0 V relative to VSS. |+| 23 | PA0 | bidirectional | 5 V-tolerant FT_at I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH1, TIM5_CH1, TIM8_ETR, SPI6_NSS, USART2_CTS/USART2_NSS and UART4_TX; additional functions ADC12_INP0/ADC12_INN1, TAMP_IN2/TAMP_OUT1 and WKUP1. |+| 24 | PA1 | bidirectional | 5 V-tolerant FT_aht I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH2, TIM5_CH2, LPTIM1_IN1, OCTOSPI1_DQS, USART2_RTS and UART4_RX; additional functions ADC12_INP1 and TAMP_IN5/TAMP_OUT4. |+| 25 | PA2 | bidirectional | 5 V-tolerant FT_hat I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH3, TIM5_CH3, TIM15_CH1, LPTIM1_IN2, USART2_TX and ETH_MDIO; additional functions ADC12_INP14, TAMP_IN4/TAMP_OUT3 and WKUP2. |+| 26 | PA3 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH4, TIM5_CH4, OCTOSPI1_CLK, TIM15_CH2, SPI2_NSS/I2S2_WS and USART2_RX; additional function ADC12_INP15. |+| 27 | VSS | power_in | Ground pin of the digital domain; all VSS pins must be connected to ground. |+| 28 | VDD | power_in | Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0), absolute maximum -0.3 V to 4.0 V. |+| 29 | PA4 | bidirectional | 3.6 V-tolerant TT_a I/O with analog switch supplied by VDDA; alternate functions include TIM5_ETR, LPTIM2_CH1, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK and DCMI_HSYNC/PSSI_DE; additional functions ADC12_INP18 and DAC1_OUT1. |+| 30 | PA5 | bidirectional | 3.6 V-tolerant TT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH1, TIM8_CH1N, SPI1_SCK/I2S1_CK, SPI6_SCK, ETH_MII_TX_EN and PSSI_D14; additional functions ADC12_INP19/ADC12_INN18 and DAC1_OUT2. |+| 31 | PA6 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO/I2S1_SDI, OCTOSPI1_IO3, USART11_TX and DCMI_PIXCLK/PSSI_PDCK; additional function ADC12_INP3. |+| 32 | PA7 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SDO, USART11_RX, OCTOSPI1_IO2, ETH_MII_RX_DV and FMC_NWE; additional functions ADC12_INP7/ADC12_INN3. |+| 33 | PC4 | bidirectional | 5 V-tolerant FT_a I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH4, SAI1_CK1, LPTIM2_ETR, I2S1_MCK, USART3_RX, ETH_MII_RXD0 and FMC_SDNE0; additional function ADC12_INP4. |+| 34 | PC5 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH4N, SAI1_D3, PSSI_D15, SAI1_FS_A, UART12_RTS, OCTOSPI1_DQS, ETH_MII_RXD1 and FMC_SDCKE0; additional functions ADC12_INP8/ADC12_INN4. |+| 35 | PB0 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH2N, TIM3_CH3, TIM8_CH2N, OCTOSPI1_IO1, USART11_CK, UART4_CTS, ETH_MII_RXD2 and LPTIM3_CH1; additional functions ADC12_INP9/ADC12_INN5. |+| 36 | PB1 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH3N, TIM3_CH4, TIM8_CH3N, OCTOSPI1_IO0, ETH_MII_RXD3 and LPTIM3_CH2; additional function ADC12_INP5. |+| 37 | PB2 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include RTC_OUT2, SAI1_D1, TIM8_CH4N, SPI1_RDY, LPTIM1_CH1, SPI3_MOSI/I2S3_SDO, OCTOSPI1_CLK and SDMMC1_CMD; also LSCO output. |+| 38 | PE7 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_ETR, UART12_RTS, UART7_RX, OCTOSPI1_IO4 and FMC_D4/FMC_AD4. |+| 39 | PE8 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH1N, UART12_CTS/UART12_NSS, UART7_TX, OCTOSPI1_IO5 and FMC_D5/FMC_AD5. |+| 40 | PE9 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH1, UART12_RX, UART7_RTS, OCTOSPI1_IO6 and FMC_D6/FMC_AD6. |+| 41 | PE10 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH2N, UART12_TX, UART7_CTS, OCTOSPI1_IO7 and FMC_D7/FMC_AD7. |+| 42 | PE11 | bidirectional | 5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH2, SPI1_RDY, SPI4_NSS, OCTOSPI1_NCS, SAI2_SD_B and FMC_D8/FMC_AD8. |+| 43 | PE12 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH3N, SPI4_SCK, SAI2_SCK_B and FMC_D9/FMC_AD9. |+| 44 | PE13 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH3, SPI4_MISO, SAI2_FS_B and FMC_D10/FMC_AD10. |+| 45 | PE14 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B and FMC_D11/FMC_AD11. |+| 46 | PE15 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_BKIN, TIM1_CH4N, USART10_CK and FMC_D12/FMC_AD12. |+| 47 | PB10 | bidirectional | 5 V-tolerant FT_f I/O with Fm+ capability; alternate functions include TIM2_CH3, LPTIM3_CH1, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OCTOSPI1_NCS and ETH_MII_RX_ER. |+| 48 | VCAP | power_in | Core-logic regulator (VCORE) output pin that must be decoupled with the external VCAP capacitor. |+| 49 | VSS | power_in | Ground pin of the digital domain; all VSS pins must be connected to ground. |+| 50 | VDD | power_in | Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0), absolute maximum -0.3 V to 4.0 V. |+| 51 | PB12 | bidirectional | 5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include TIM1_BKIN, OCTOSPI1_NCLK, I2C2_SDA, SPI2_NSS/I2S2_WS, UCPD1_FRSTX, USART3_CK, FDCAN2_RX and UART5_RX. |+| 52 | PB13 | bidirectional | 5 V-tolerant FT_c I/O with USB Type-C power delivery function; alternate functions include TIM1_CH1N, LPTIM3_IN1, LPTIM2_CH1, I2C2_SMBA, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX and SDMMC1_D0; additional function UCPD1_CC1. |+| 53 | PB14 | bidirectional | 5 V-tolerant FT_c I/O with USB Type-C power delivery function; alternate functions include TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS and SDMMC2_D0; additional function UCPD1_CC2. |+| 54 | PB15 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1, OCTOSPI1_CLK and UART5_RX; additional function PVD_IN. |+| 55 | PD8 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include USART3_TX and FMC_D13/FMC_AD13. |+| 56 | PD9 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include USART3_RX, FDCAN2_RX and FMC_D14/FMC_AD14. |+| 57 | PD10 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include LPTIM2_CH2, USART3_CK and FMC_D15/FMC_AD15. |+| 58 | PD11 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include SAI1_CK1, LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS, UART4_RX, OCTOSPI1_IO0 and FMC_A16/FMC_CLE. |+| 59 | PD12 | bidirectional | 5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include LPTIM1_IN1, TIM4_CH1, LPTIM2_IN1, I2C4_SCL, I3C1_SCL, USART3_RTS, UART4_TX, OCTOSPI1_IO1 and FMC_A17/FMC_ALE. |+| 60 | PD13 | bidirectional | 5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include LPTIM1_CH1, TIM4_CH2, LPTIM2_CH1, I2C4_SDA, I3C1_SDA, OCTOSPI1_IO3, UART9_RTS and FMC_A18. |+| 61 | PD14 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_AD0. |+| 62 | PD15 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM4_CH4, UART8_RTS, UART9_TX and FMC_D1/FMC_AD1. |+| 63 | PC6 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK, SAI1_SCK_A, USART6_TX, FMC_NWAIT, OCTOSPI1_IO5 and DCMI_D0/PSSI_D0. |+| 64 | PC7 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1, OCTOSPI1_IO6 and DCMI_D1/PSSI_D1. |+| 65 | PC8 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT and DCMI_D2/PSSI_D2. |+| 66 | PC9 | bidirectional | 5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, AUDIOCLK, UART5_CTS, OCTOSPI1_IO0 and FMC_CLE; additional function UCPD1_DB2. |+| 67 | PA8 | bidirectional | 5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, SPI1_RDY, USART1_CK, USB_SOF, UART7_RX and FMC_NOE. |+| 68 | PA9 | bidirectional | 5 V-tolerant FT_d I/O with USB Type-C dead battery function; alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, ETH_MII_TX_ER and FMC_NWE; additional function UCPD1_DB1. |+| 69 | PA10 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH3, LPUART1_RX, LPTIM2_IN2, UCPD1_FRSTX, USART1_RX, FDCAN2_TX and SDMMC1_D0. |+| 70 | PA11 | bidirectional | 5 V-tolerant FT_u I/O supplied by VDDUSB for the USB function; alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX and USB_DM. |+| 71 | PA12 | bidirectional | 5 V-tolerant FT_u I/O supplied by VDDUSB for the USB function; alternate functions include TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX and USB_DP. |+| 72 | PA13 | bidirectional | 5 V-tolerant FT I/O; after reset it is the JTMS/SWDIO debug function with an internal pull-up enabled. |+| 73 | VDDUSB | power_in | Supply for the USB full-speed I/O (USB FS IOs). |+| 74 | VSS | power_in | Ground pin of the digital domain; all VSS pins must be connected to ground. |+| 75 | VDD | power_in | Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0), absolute maximum -0.3 V to 4.0 V. |+| 76 | PA14 | bidirectional | 5 V-tolerant FT I/O; after reset it is the JTCK/SWCLK debug function with an internal pull-down enabled. |+| 77 | PA15 | bidirectional | 5 V-tolerant FT I/O; after reset it is the JTDI debug function with an internal pull-up enabled; alternate functions include TIM2_CH1, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, UART4_RTS and UART7_TX. |+| 78 | PC10 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include LPTIM3_ETR, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPI1_IO1, ETH_MII_TXD0, SDMMC1_D2 and DCMI_D8/PSSI_D8. |+| 79 | PC11 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include LPTIM3_IN1, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPI1_NCS, SDMMC1_D3 and DCMI_D4/PSSI_D4. |+| 80 | PC12 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED3, TIM15_CH1, SPI6_SCK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9/PSSI_D9. |+| 81 | PD0 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM8_CH4N, UART4_RX, FDCAN1_RX, UART9_CTS and FMC_D2/FMC_AD2. |+| 82 | PD1 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include UART4_TX, FDCAN1_TX and FMC_D3/FMC_AD3. |+| 83 | PD2 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD, DCMI_D11/PSSI_D11 and LPTIM4_ETR; additional function WKUP7. |+| 84 | PD3 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK and DCMI_D5/PSSI_D5; additional function WKUP8. |+| 85 | PD4 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include USART2_RTS, OCTOSPI1_IO4 and FMC_NOE. |+| 86 | PD5 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH4N, SPI2_RDY, USART2_TX, FDCAN1_TX, OCTOSPI1_IO5 and FMC_NWE. |+| 87 | PD6 | bidirectional | 5 V-tolerant FT_sh I/O whose supply is listed as VDDIO2 only; alternate functions include SAI1_D1, SPI3_MOSI/I2S3_SDO, SAI1_SD_A, USART2_RX, OCTOSPI1_IO6, SDMMC2_CK, FMC_NWAIT and DCMI_D10/PSSI_D10. |+| 88 | PD7 | bidirectional | 5 V-tolerant FT_sh I/O whose supply is listed as VDDIO2 only; alternate functions include SPI1_MOSI/I2S1_SDO, USART2_CK, OCTOSPI1_IO7, SDMMC2_CMD, FMC_NE1/FMC_NCE and LPTIM4_OUT. |+| 89 | PB3 | bidirectional | 5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include JTDO/TRACESWO, TIM2_CH2, I2C2_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SPI6_SCK, SDMMC2_D2 and UART7_RX; after reset it is the JTDO/TRACESWO debug function. |+| 90 | PB4 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; after reset it is the NJTRST debug function with an internal pull-up enabled; alternate functions include TIM16_BKIN, TIM3_CH1, OCTOSPI1_CLK, LPTIM1_CH2, SPI1_MISO/I2S1_SDI, SPI6_MISO and UART7_TX. |+| 91 | PB5 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM17_BKIN, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, SPI6_MOSI, FDCAN2_RX, ETH_PPS_OUT, FMC_SDCKE1 and DCMI_D10/PSSI_D10. |+| 92 | PB6 | bidirectional | 5 V-tolerant FT_f I/O with Fm+ capability; alternate functions include TIM16_CH1N, TIM4_CH1, I3C1_SCL, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPI1_NCS and FMC_SDNE1. |+| 93 | PB7 | bidirectional | 5 V-tolerant FT_fa I/O with Fm+ capability and analog switch supplied by VDDA; alternate functions include TIM17_CH1N, TIM4_CH2, I3C1_SDA, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, FDCAN1_TX and FMC_NL; additional function WKUP5. |+| 94 | BOOT0 | input | Boot-mode selection input; its input voltage is limited to VSS to min(min(VDD, VDDA, VDDUSB, VDDIO2)+4.0 V, 6.0 V) per the voltage characteristics, and boot modes are defined in the boot mode tables (Table 3/Table 4). |+| 95 | PB8 | bidirectional | 5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include TIM16_CH1, TIM4_CH3, I3C1_SCL, I2C1_SCL, SPI4_RDY, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX and DCMI_D6/PSSI_D6. |+| 96 | PB9 | bidirectional | 5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include TIM17_CH1, TIM4_CH4, I3C1_SDA, I2C1_SDA, SPI2_NSS/I2S2_WS, I2C4_SDA, UART4_TX, FDCAN1_TX and DCMI_D7/PSSI_D7. |+| 97 | PE0 | bidirectional | 5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include LPTIM1_ETR, TIM4_ETR, LPTIM2_CH2, LPTIM2_ETR, SPI3_RDY, UART8_RX, FDCAN1_RX, FMC_NBL0 and DCMI_D2/PSSI_D2. |+| 98 | VCAP | power_in | Core-logic regulator (VCORE) output pin that must be decoupled with the external VCAP capacitor. |+| 99 | VSS | power_in | Ground pin of the digital domain; all VSS pins must be connected to ground. |+| 100 | VDD | power_in | Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0), absolute maximum -0.3 V to 4.0 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32H563VIT6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32h563vit6-etched.step` / `stm32h563vit6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32h563vit6.step` / `stm32h563vit6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903419178082304) (275 pp, sha256 `5bbb35bcb33c55f6`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32h563vit6-datasheet.pdf)
page.jsonadded+751@@ -0,0 +1,751 @@+{+ "slug": "stm32h563vit6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32h563vit6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32h563vit6.kicad_sym",+ "stm32h563vit6.kicad_mod",+ "stm32h563vit6.glb",+ "stm32h563vit6.step",+ "stm32h563vit6.lbr",+ "docs/hero.png",+ "docs/stm32h563vit6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32h563vit6-hero.glb",+ "stm32h563vit6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32H563VIT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-100(14x14)",+ "pin_count": 100,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903419178082304",+ "parts": {+ "symbol": "stm32h563vit6.kicad_sym",+ "footprint": "stm32h563vit6.kicad_mod",+ "model_3d": "stm32h563vit6-hero.glb",+ "model_3d_plain": "stm32h563vit6.glb",+ "model_3d_step": "stm32h563vit6-etched.step",+ "model_3d_step_plain": "stm32h563vit6.step",+ "lbr": "stm32h563vit6.lbr"+ },+ "distributor_links": {+ "lcsc": "C6937834",+ "digikey": "497-STM32H563VIT6-ND",+ "mouser": "511-STM32H563VIT6"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T20:58:20Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-STM32H563VIT6-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32H563VIT6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PE2",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, OCTOSPI1_IO2, ETH_MII_TXD3, FMC_A23 and DCMI_D3/PSSI_D3."+ },+ {+ "number": "2",+ "name": "PE3",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX and FMC_A19; additional function TAMP_IN6/TAMP_OUT3."+ },+ {+ "number": "3",+ "name": "PE4",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED1, SAI1_D2, TIM15_CH1N, SPI4_NSS, FMC_A20 and DCMI_D4/PSSI_D4; additional function TAMP_IN7/TAMP_OUT8."+ },+ {+ "number": "4",+ "name": "PE5",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, FMC_A21 and DCMI_D6/PSSI_D6; additional function TAMP_IN8/TAMP_OUT7."+ },+ {+ "number": "5",+ "name": "PE6",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI2_MCLK_B and FMC_A22; additional function TAMP_IN3/TAMP_OUT6."+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup-domain supply for the RTC and 32 backup registers; absolute maximum range is -0.3 V to 4.0 V relative to VSS."+ },+ {+ "number": "7",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_t I/O supplied through the power switch (VSW); output speed must not exceed 2 MHz with a 30 pF load and it must not be used as a current source; functional as tamper input/output in VBAT and Standby; additional functions TAMP_IN1/TAMP_OUT2, RTC_OUT1/RTC_TS and WKUP4."+ },+ {+ "number": "8",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "5 V-tolerant FT I/O supplied through the power switch with the same 2 MHz / 30 pF output limit as PC13; also the LSE oscillator input (OSC32_IN)."+ },+ {+ "number": "9",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "5 V-tolerant FT I/O supplied through the power switch with the same 2 MHz / 30 pF output limit as PC13; also the LSE oscillator output (OSC32_OUT)."+ },+ {+ "number": "10",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground pin of the digital domain; all VSS pins must be connected to ground."+ },+ {+ "number": "11",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0) or 1.71 V to 2.7 V (HSLV=1), absolute maximum -0.3 V to 4.0 V."+ },+ {+ "number": "12",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "5 V-tolerant FT I/O; also the HSE oscillator input (OSC_IN) for 4-50 MHz external clock or crystal."+ },+ {+ "number": "13",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "5 V-tolerant FT I/O; also the HSE oscillator output (OSC_OUT)."+ },+ {+ "number": "14",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up resistor."+ },+ {+ "number": "15",+ "name": "PC0",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_a I/O with analog switch function supplied by VDDA; alternate functions include TIM16_BKIN, SAI1_MCLK_A, SPI2_RDY, FMC_A25 and OCTOSPI1_IO7; additional function ADC12_INP10."+ },+ {+ "number": "16",+ "name": "PC1",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TRACED0, SAI1_SD_A, SPI2_MOSI/I2S2_SDO, SDMMC2_CK and ETH_MDC; additional functions ADC12_INP11/ADC12_INN10, TAMP_IN3/TAMP_OUT5 and WKUP6."+ },+ {+ "number": "17",+ "name": "PC2",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_a I/O with analog switch supplied by VDDA; alternate functions include PWR_CSLEEP, TIM17_CH1, SPI2_MISO/I2S2_SDI, OCTOSPI1_IO5, ETH_MII_TXD2 and FMC_SDNE0; additional functions ADC12_INP12/ADC12_INN11."+ },+ {+ "number": "18",+ "name": "PC3",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_a I/O with analog switch supplied by VDDA; alternate functions include PWR_CSTOP, SAI1_D3, LPTIM3_CH1, SPI2_MOSI/I2S2_SDO, OCTOSPI1_IO6 and FMC_SDCKE0; additional functions ADC12_INP13/ADC12_INN12."+ },+ {+ "number": "19",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground for ADC, DAC and the analog reference blocks."+ },+ {+ "number": "20",+ "name": "VREF-",+ "type": "power_in",+ "description": "Negative voltage reference pin listed as a supply pin in the pin table; the datasheet gives no further limits for this pin in the pinout section."+ },+ {+ "number": "21",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive voltage reference input for the ADC/DAC, rated within the -0.3 V to 4.0 V external supply range; when the VREF+ pad is absent the internal VREFBUF must stay disabled (VREF+ is present on this package)."+ },+ {+ "number": "22",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply for ADC, DAC, reference and analog switches; absolute maximum -0.3 V to 4.0 V relative to VSS."+ },+ {+ "number": "23",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_at I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH1, TIM5_CH1, TIM8_ETR, SPI6_NSS, USART2_CTS/USART2_NSS and UART4_TX; additional functions ADC12_INP0/ADC12_INN1, TAMP_IN2/TAMP_OUT1 and WKUP1."+ },+ {+ "number": "24",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_aht I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH2, TIM5_CH2, LPTIM1_IN1, OCTOSPI1_DQS, USART2_RTS and UART4_RX; additional functions ADC12_INP1 and TAMP_IN5/TAMP_OUT4."+ },+ {+ "number": "25",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_hat I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH3, TIM5_CH3, TIM15_CH1, LPTIM1_IN2, USART2_TX and ETH_MDIO; additional functions ADC12_INP14, TAMP_IN4/TAMP_OUT3 and WKUP2."+ },+ {+ "number": "26",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH4, TIM5_CH4, OCTOSPI1_CLK, TIM15_CH2, SPI2_NSS/I2S2_WS and USART2_RX; additional function ADC12_INP15."+ },+ {+ "number": "27",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground pin of the digital domain; all VSS pins must be connected to ground."+ },+ {+ "number": "28",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0), absolute maximum -0.3 V to 4.0 V."+ },+ {+ "number": "29",+ "name": "PA4",+ "type": "bidirectional",+ "description": "3.6 V-tolerant TT_a I/O with analog switch supplied by VDDA; alternate functions include TIM5_ETR, LPTIM2_CH1, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK and DCMI_HSYNC/PSSI_DE; additional functions ADC12_INP18 and DAC1_OUT1."+ },+ {+ "number": "30",+ "name": "PA5",+ "type": "bidirectional",+ "description": "3.6 V-tolerant TT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH1, TIM8_CH1N, SPI1_SCK/I2S1_CK, SPI6_SCK, ETH_MII_TX_EN and PSSI_D14; additional functions ADC12_INP19/ADC12_INN18 and DAC1_OUT2."+ },+ {+ "number": "31",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO/I2S1_SDI, OCTOSPI1_IO3, USART11_TX and DCMI_PIXCLK/PSSI_PDCK; additional function ADC12_INP3."+ },+ {+ "number": "32",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SDO, USART11_RX, OCTOSPI1_IO2, ETH_MII_RX_DV and FMC_NWE; additional functions ADC12_INP7/ADC12_INN3."+ },+ {+ "number": "33",+ "name": "PC4",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_a I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH4, SAI1_CK1, LPTIM2_ETR, I2S1_MCK, USART3_RX, ETH_MII_RXD0 and FMC_SDNE0; additional function ADC12_INP4."+ },+ {+ "number": "34",+ "name": "PC5",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH4N, SAI1_D3, PSSI_D15, SAI1_FS_A, UART12_RTS, OCTOSPI1_DQS, ETH_MII_RXD1 and FMC_SDCKE0; additional functions ADC12_INP8/ADC12_INN4."+ },+ {+ "number": "35",+ "name": "PB0",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH2N, TIM3_CH3, TIM8_CH2N, OCTOSPI1_IO1, USART11_CK, UART4_CTS, ETH_MII_RXD2 and LPTIM3_CH1; additional functions ADC12_INP9/ADC12_INN5."+ },+ {+ "number": "36",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH3N, TIM3_CH4, TIM8_CH3N, OCTOSPI1_IO0, ETH_MII_RXD3 and LPTIM3_CH2; additional function ADC12_INP5."+ },+ {+ "number": "37",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include RTC_OUT2, SAI1_D1, TIM8_CH4N, SPI1_RDY, LPTIM1_CH1, SPI3_MOSI/I2S3_SDO, OCTOSPI1_CLK and SDMMC1_CMD; also LSCO output."+ },+ {+ "number": "38",+ "name": "PE7",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_ETR, UART12_RTS, UART7_RX, OCTOSPI1_IO4 and FMC_D4/FMC_AD4."+ },+ {+ "number": "39",+ "name": "PE8",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH1N, UART12_CTS/UART12_NSS, UART7_TX, OCTOSPI1_IO5 and FMC_D5/FMC_AD5."+ },+ {+ "number": "40",+ "name": "PE9",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH1, UART12_RX, UART7_RTS, OCTOSPI1_IO6 and FMC_D6/FMC_AD6."+ },+ {+ "number": "41",+ "name": "PE10",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH2N, UART12_TX, UART7_CTS, OCTOSPI1_IO7 and FMC_D7/FMC_AD7."+ },+ {+ "number": "42",+ "name": "PE11",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_ah I/O with analog switch supplied by VDDA; alternate functions include TIM1_CH2, SPI1_RDY, SPI4_NSS, OCTOSPI1_NCS, SAI2_SD_B and FMC_D8/FMC_AD8."+ },+ {+ "number": "43",+ "name": "PE12",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH3N, SPI4_SCK, SAI2_SCK_B and FMC_D9/FMC_AD9."+ },+ {+ "number": "44",+ "name": "PE13",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH3, SPI4_MISO, SAI2_FS_B and FMC_D10/FMC_AD10."+ },+ {+ "number": "45",+ "name": "PE14",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B and FMC_D11/FMC_AD11."+ },+ {+ "number": "46",+ "name": "PE15",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_BKIN, TIM1_CH4N, USART10_CK and FMC_D12/FMC_AD12."+ },+ {+ "number": "47",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_f I/O with Fm+ capability; alternate functions include TIM2_CH3, LPTIM3_CH1, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OCTOSPI1_NCS and ETH_MII_RX_ER."+ },+ {+ "number": "48",+ "name": "VCAP",+ "type": "power_in",+ "description": "Core-logic regulator (VCORE) output pin that must be decoupled with the external VCAP capacitor."+ },+ {+ "number": "49",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground pin of the digital domain; all VSS pins must be connected to ground."+ },+ {+ "number": "50",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0), absolute maximum -0.3 V to 4.0 V."+ },+ {+ "number": "51",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include TIM1_BKIN, OCTOSPI1_NCLK, I2C2_SDA, SPI2_NSS/I2S2_WS, UCPD1_FRSTX, USART3_CK, FDCAN2_RX and UART5_RX."+ },+ {+ "number": "52",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_c I/O with USB Type-C power delivery function; alternate functions include TIM1_CH1N, LPTIM3_IN1, LPTIM2_CH1, I2C2_SMBA, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX and SDMMC1_D0; additional function UCPD1_CC1."+ },+ {+ "number": "53",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_c I/O with USB Type-C power delivery function; alternate functions include TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS and SDMMC2_D0; additional function UCPD1_CC2."+ },+ {+ "number": "54",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1, OCTOSPI1_CLK and UART5_RX; additional function PVD_IN."+ },+ {+ "number": "55",+ "name": "PD8",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include USART3_TX and FMC_D13/FMC_AD13."+ },+ {+ "number": "56",+ "name": "PD9",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include USART3_RX, FDCAN2_RX and FMC_D14/FMC_AD14."+ },+ {+ "number": "57",+ "name": "PD10",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include LPTIM2_CH2, USART3_CK and FMC_D15/FMC_AD15."+ },+ {+ "number": "58",+ "name": "PD11",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include SAI1_CK1, LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS, UART4_RX, OCTOSPI1_IO0 and FMC_A16/FMC_CLE."+ },+ {+ "number": "59",+ "name": "PD12",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include LPTIM1_IN1, TIM4_CH1, LPTIM2_IN1, I2C4_SCL, I3C1_SCL, USART3_RTS, UART4_TX, OCTOSPI1_IO1 and FMC_A17/FMC_ALE."+ },+ {+ "number": "60",+ "name": "PD13",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include LPTIM1_CH1, TIM4_CH2, LPTIM2_CH1, I2C4_SDA, I3C1_SDA, OCTOSPI1_IO3, UART9_RTS and FMC_A18."+ },+ {+ "number": "61",+ "name": "PD14",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_AD0."+ },+ {+ "number": "62",+ "name": "PD15",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM4_CH4, UART8_RTS, UART9_TX and FMC_D1/FMC_AD1."+ },+ {+ "number": "63",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK, SAI1_SCK_A, USART6_TX, FMC_NWAIT, OCTOSPI1_IO5 and DCMI_D0/PSSI_D0."+ },+ {+ "number": "64",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1, OCTOSPI1_IO6 and DCMI_D1/PSSI_D1."+ },+ {+ "number": "65",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT and DCMI_D2/PSSI_D2."+ },+ {+ "number": "66",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, AUDIOCLK, UART5_CTS, OCTOSPI1_IO0 and FMC_CLE; additional function UCPD1_DB2."+ },+ {+ "number": "67",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, SPI1_RDY, USART1_CK, USB_SOF, UART7_RX and FMC_NOE."+ },+ {+ "number": "68",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_d I/O with USB Type-C dead battery function; alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, ETH_MII_TX_ER and FMC_NWE; additional function UCPD1_DB1."+ },+ {+ "number": "69",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH3, LPUART1_RX, LPTIM2_IN2, UCPD1_FRSTX, USART1_RX, FDCAN2_TX and SDMMC1_D0."+ },+ {+ "number": "70",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_u I/O supplied by VDDUSB for the USB function; alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX and USB_DM."+ },+ {+ "number": "71",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_u I/O supplied by VDDUSB for the USB function; alternate functions include TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX and USB_DP."+ },+ {+ "number": "72",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5 V-tolerant FT I/O; after reset it is the JTMS/SWDIO debug function with an internal pull-up enabled."+ },+ {+ "number": "73",+ "name": "VDDUSB",+ "type": "power_in",+ "description": "Supply for the USB full-speed I/O (USB FS IOs)."+ },+ {+ "number": "74",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground pin of the digital domain; all VSS pins must be connected to ground."+ },+ {+ "number": "75",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0), absolute maximum -0.3 V to 4.0 V."+ },+ {+ "number": "76",+ "name": "PA14",+ "type": "bidirectional",+ "description": "5 V-tolerant FT I/O; after reset it is the JTCK/SWCLK debug function with an internal pull-down enabled."+ },+ {+ "number": "77",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5 V-tolerant FT I/O; after reset it is the JTDI debug function with an internal pull-up enabled; alternate functions include TIM2_CH1, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, UART4_RTS and UART7_TX."+ },+ {+ "number": "78",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include LPTIM3_ETR, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPI1_IO1, ETH_MII_TXD0, SDMMC1_D2 and DCMI_D8/PSSI_D8."+ },+ {+ "number": "79",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include LPTIM3_IN1, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPI1_NCS, SDMMC1_D3 and DCMI_D4/PSSI_D4."+ },+ {+ "number": "80",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED3, TIM15_CH1, SPI6_SCK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9/PSSI_D9."+ },+ {+ "number": "81",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM8_CH4N, UART4_RX, FDCAN1_RX, UART9_CTS and FMC_D2/FMC_AD2."+ },+ {+ "number": "82",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include UART4_TX, FDCAN1_TX and FMC_D3/FMC_AD3."+ },+ {+ "number": "83",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD, DCMI_D11/PSSI_D11 and LPTIM4_ETR; additional function WKUP7."+ },+ {+ "number": "84",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK and DCMI_D5/PSSI_D5; additional function WKUP8."+ },+ {+ "number": "85",+ "name": "PD4",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include USART2_RTS, OCTOSPI1_IO4 and FMC_NOE."+ },+ {+ "number": "86",+ "name": "PD5",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM1_CH4N, SPI2_RDY, USART2_TX, FDCAN1_TX, OCTOSPI1_IO5 and FMC_NWE."+ },+ {+ "number": "87",+ "name": "PD6",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_sh I/O whose supply is listed as VDDIO2 only; alternate functions include SAI1_D1, SPI3_MOSI/I2S3_SDO, SAI1_SD_A, USART2_RX, OCTOSPI1_IO6, SDMMC2_CK, FMC_NWAIT and DCMI_D10/PSSI_D10."+ },+ {+ "number": "88",+ "name": "PD7",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_sh I/O whose supply is listed as VDDIO2 only; alternate functions include SPI1_MOSI/I2S1_SDO, USART2_CK, OCTOSPI1_IO7, SDMMC2_CMD, FMC_NE1/FMC_NCE and LPTIM4_OUT."+ },+ {+ "number": "89",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include JTDO/TRACESWO, TIM2_CH2, I2C2_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SPI6_SCK, SDMMC2_D2 and UART7_RX; after reset it is the JTDO/TRACESWO debug function."+ },+ {+ "number": "90",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; after reset it is the NJTRST debug function with an internal pull-up enabled; alternate functions include TIM16_BKIN, TIM3_CH1, OCTOSPI1_CLK, LPTIM1_CH2, SPI1_MISO/I2S1_SDI, SPI6_MISO and UART7_TX."+ },+ {+ "number": "91",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include TIM17_BKIN, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, SPI6_MOSI, FDCAN2_RX, ETH_PPS_OUT, FMC_SDCKE1 and DCMI_D10/PSSI_D10."+ },+ {+ "number": "92",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_f I/O with Fm+ capability; alternate functions include TIM16_CH1N, TIM4_CH1, I3C1_SCL, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPI1_NCS and FMC_SDNE1."+ },+ {+ "number": "93",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fa I/O with Fm+ capability and analog switch supplied by VDDA; alternate functions include TIM17_CH1N, TIM4_CH2, I3C1_SDA, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, FDCAN1_TX and FMC_NL; additional function WKUP5."+ },+ {+ "number": "94",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot-mode selection input; its input voltage is limited to VSS to min(min(VDD, VDDA, VDDUSB, VDDIO2)+4.0 V, 6.0 V) per the voltage characteristics, and boot modes are defined in the boot mode tables (Table 3/Table 4)."+ },+ {+ "number": "95",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include TIM16_CH1, TIM4_CH3, I3C1_SCL, I2C1_SCL, SPI4_RDY, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX and DCMI_D6/PSSI_D6."+ },+ {+ "number": "96",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_fh I/O with Fm+ and high-speed low-voltage options; alternate functions include TIM17_CH1, TIM4_CH4, I3C1_SDA, I2C1_SDA, SPI2_NSS/I2S2_WS, I2C4_SDA, UART4_TX, FDCAN1_TX and DCMI_D7/PSSI_D7."+ },+ {+ "number": "97",+ "name": "PE0",+ "type": "bidirectional",+ "description": "5 V-tolerant FT_h I/O with high-speed low-voltage option; alternate functions include LPTIM1_ETR, TIM4_ETR, LPTIM2_CH2, LPTIM2_ETR, SPI3_RDY, UART8_RX, FDCAN1_RX, FMC_NBL0 and DCMI_D2/PSSI_D2."+ },+ {+ "number": "98",+ "name": "VCAP",+ "type": "power_in",+ "description": "Core-logic regulator (VCORE) output pin that must be decoupled with the external VCAP capacitor."+ },+ {+ "number": "99",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground pin of the digital domain; all VSS pins must be connected to ground."+ },+ {+ "number": "100",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital and I/O supply; standard operating range is 1.71 V to 3.6 V (HSLV=0), absolute maximum -0.3 V to 4.0 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package/variant selection: MPN STM32H563VIT6 decodes to 100 pins (V), LQFP (T), 2 MB flash (I), temp; Pin numbers and names were taken from the Table 14 LQFP100 column because the Figure 8 text extracti; PD6 (pin 87) and PD7 (pin 88) are FT_sh (supplied only by VDDIO2), but the LQFP100 pin list contains"+ ],+ "pages_sent": 112,+ "cost_usd": 0.7733,+ "at": "2026-10-07T20:57:47"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903419178082304",+ "pages": 275,+ "sha256": "5bbb35bcb33c55f6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 100,+ "described": 100,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32h563vit6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32h563vit6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9e3aa911a0056a9295a45cf6d607529127a601d1dc118d2c37aa010f4ebcda0e",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}