← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32H503RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32H503RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup battery supply voltage (1.2 V to 3.6 V) for real-time clock, backup registers, and VBAT mode operation. |+| 2 | PC13 | bidirectional | General-purpose I/O port C bit 13; 5V-tolerant with tamper detection, RTC output, and WKUP4 capability. |+| 3 | PC14-OSC32_IN | bidirectional | Port C bit 14 serving as 32.768 kHz low-speed oscillator input for real-time clock; 5V-tolerant. |+| 4 | PC15-OSC32_OUT | bidirectional | Port C bit 15 serving as 32.768 kHz low-speed oscillator output for real-time clock; 5V-tolerant. |+| 5 | PH0-OSC_IN | bidirectional | Port H bit 0 serving as main oscillator input (4 to 50 MHz); 5V-tolerant. |+| 6 | PH1-OSC_OUT | bidirectional | Port H bit 1 serving as main oscillator output; 5V-tolerant. |+| 7 | NRST | bidirectional | System reset pin with embedded weak pull-up resistor, active low; bidirectional reset capability. |+| 8 | PC0 | bidirectional | General-purpose I/O port C bit 0; 5V-tolerant with analog switch and ADC1_INP10 input. |+| 9 | PC1 | bidirectional | General-purpose I/O port C bit 0; 5V-tolerant with analog switch, ADC1_INP11, and WKUP3 capability. |+| 10 | PC2 | bidirectional | General-purpose I/O port C bit 2; 5V-tolerant with analog switch and ADC1_INP12 input. |+| 11 | PC3 | bidirectional | General-purpose I/O port C bit 3; 5V-tolerant with analog switch and ADC1_INP13 input. |+| 12 | VSSA | power_in | Analog ground reference and VREF- supply; must be connected to VSS for proper analog operation. |+| 13 | VDDA | power_in | Analog power supply (1.62 V to 3.6 V) for ADC, DAC, OPAMP, and comparator circuits. |+| 14 | PA0 | bidirectional | General-purpose I/O port A bit 0; 5V-tolerant with analog switch, ADC input, and timer functions. |+| 15 | PA1 | bidirectional | General-purpose I/O port A bit 1; 5V-tolerant with analog switch and ADC1_INP1 input. |+| 16 | PA2 | bidirectional | General-purpose I/O port A bit 2; 5V-tolerant with analog switch, LPUART1_RX, and ADC input. |+| 17 | PA3 | bidirectional | General-purpose I/O port A bit 3; 5V-tolerant with analog switch, LPUART1_TX, and ADC input. |+| 18 | VSS | power_in | Digital ground for core domain; must be connected to external ground plane. |+| 19 | VDD | power_in | Main digital power supply (1.71 V to 3.6 V) for core and I/O domains; requires 100 nF decoupling capacitor. |+| 20 | PA4 | bidirectional | General-purpose I/O port A bit 4 (3.6V-tolerant); supports DAC1_OUT1 and ADC1_INP18. |+| 21 | PA5 | bidirectional | General-purpose I/O port A bit 5 (3.6V-tolerant); supports DAC1_OUT2, ADC input, and SPI clock. |+| 22 | PA6 | bidirectional | General-purpose I/O port A bit 6; 5V-tolerant with analog switch and ADC1_INP3 input. |+| 23 | PA7 | bidirectional | General-purpose I/O port A bit 7 (3.6V-tolerant); supports I2S MCK and ADC1_INP7 input. |+| 24 | PC4 | bidirectional | General-purpose I/O port C bit 4; 5V-tolerant with analog switch and ADC1_INP4 input. |+| 25 | PC5 | bidirectional | General-purpose I/O port C bit 5 (3.6V-tolerant); supports comparator output and ADC input. |+| 26 | PB0 | bidirectional | General-purpose I/O port B bit 0; 5V-tolerant with analog switch and ADC1_INP9 input. |+| 27 | PB1 | bidirectional | General-purpose I/O port B bit 1; 5V-tolerant with analog switch, comparator output, and ADC input. |+| 28 | PB2 | bidirectional | General-purpose I/O port B bit 2; 5V-tolerant with analog switch and comparator output. |+| 29 | PB10 | bidirectional | General-purpose I/O port B bit 10; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support. |+| 30 | VCAP | passive | External capacitor connection (2.2 µF typical) for embedded LDO regulator stabilization. |+| 31 | VSS | power_in | Digital ground for core domain; must be connected to external ground plane. |+| 32 | VDD | power_in | Main digital power supply (1.71 V to 3.6 V); requires 100 nF decoupling capacitor. |+| 33 | PB12 | bidirectional | General-purpose I/O port B bit 12; 5V-tolerant with high-speed low-voltage mode support. |+| 34 | PB13 | bidirectional | General-purpose I/O port B bit 13; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support. |+| 35 | PB14 | bidirectional | General-purpose I/O port B bit 14; 5V-tolerant with high-speed low-voltage mode support. |+| 36 | PB15 | bidirectional | General-purpose I/O port B bit 15; 5V-tolerant with analog switch, ADC input, and comparator output. |+| 37 | PC6 | bidirectional | General-purpose I/O port C bit 6; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support. |+| 38 | PC7 | bidirectional | General-purpose I/O port C bit 7; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support. |+| 39 | PC8 | bidirectional | General-purpose I/O port C bit 8; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support. |+| 40 | PC9 | bidirectional | General-purpose I/O port C bit 9; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support. |+| 41 | PA8 | bidirectional | General-purpose I/O port A bit 8; 5V-tolerant with high-speed low-voltage mode; supports MCO1 clock output. |+| 42 | PA9 | bidirectional | General-purpose I/O port A bit 9; 5V-tolerant with high-speed low-voltage mode; supports LPUART1_TX. |+| 43 | PA10 | bidirectional | General-purpose I/O port A bit 10; 5V-tolerant with high-speed low-voltage mode; supports LPUART1_RX. |+| 44 | PA11 | bidirectional | General-purpose I/O port A bit 11; 5V-tolerant with high-speed low-voltage mode; supports USART1 or USB DM. |+| 45 | PA12 | bidirectional | General-purpose I/O port A bit 12; 5V-tolerant with high-speed low-voltage mode; supports USART1 or USB DP. |+| 46 | PA13 | bidirectional | JTAG/SWD debug interface pin (JTMS/SWDIO); 5V-tolerant with high-speed low-voltage mode. |+| 47 | VSS | power_in | Digital ground for core domain; must be connected to external ground plane. |+| 48 | VDD | power_in | Main digital power supply (1.71 V to 3.6 V); requires 100 nF decoupling capacitor. |+| 49 | PA14 | bidirectional | JTAG/SWD debug interface pin (JTCK/SWCLK); 5V-tolerant with high-speed low-voltage mode. |+| 50 | PA15 | bidirectional | JTAG debug interface pin (JTDI); 5V-tolerant with high-speed low-voltage mode and timer support. |+| 51 | PC10 | bidirectional | General-purpose I/O port C bit 10; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support. |+| 52 | PC11 | bidirectional | General-purpose I/O port C bit 11; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support. |+| 53 | PC12 | bidirectional | General-purpose I/O port C bit 12; 5V-tolerant with high-speed low-voltage mode support. |+| 54 | PD2 | bidirectional | General-purpose I/O port D bit 2; 5V-tolerant with high-speed low-voltage mode support. |+| 55 | PB3 | bidirectional | JTAG debug interface pin (JTDO/TRACESWO); 5V-tolerant Fm+ capable with high-speed low-voltage mode. |+| 56 | PB4 | bidirectional | JTAG debug interface pin (NJTRST); 5V-tolerant Fm+ capable with high-speed low-voltage mode. |+| 57 | PB5 | bidirectional | General-purpose I/O port B bit 5; 5V-tolerant Fm+ capable with high-speed low-voltage mode support. |+| 58 | PB6 | bidirectional | General-purpose I/O port B bit 6; 5V-tolerant Fm+ capable with high-speed low-voltage mode support. |+| 59 | PB7 | bidirectional | General-purpose I/O port B bit 7 with WKUP5 wake-up capability; 5V-tolerant Fm+ capable with high-speed low-voltage mode. |+| 60 | BOOT0 | input | Boot mode selection pin sampled during reset; high selects boot from system memory, low selects boot from flash. |+| 61 | PB8 | bidirectional | General-purpose I/O port B bit 8; 5V-tolerant Fm+ capable with high-speed low-voltage mode support. |+| 62 | VCAP | passive | External capacitor connection (2.2 µF typical) for embedded LDO regulator stabilization. |+| 63 | VSS | power_in | Digital ground for core domain; must be connected to external ground plane. |+| 64 | VDD | power_in | Main digital power supply (1.71 V to 3.6 V); requires 100 nF decoupling capacitor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32H503RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32h503rbt6-etched.step` / `stm32h503rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32h503rbt6.step` / `stm32h503rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903924188655616) (174 pp, sha256 `292aba1b6fc0225b`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32h503rbt6-datasheet.pdf)
page.jsonadded+479@@ -0,0 +1,479 @@+{+ "slug": "stm32h503rbt6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32h503rbt6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32h503rbt6.kicad_sym",+ "stm32h503rbt6.kicad_mod",+ "stm32h503rbt6.glb",+ "stm32h503rbt6.step",+ "stm32h503rbt6.lbr",+ "docs/hero.png",+ "docs/stm32h503rbt6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32H503RBT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903924188655616",+ "parts": {+ "symbol": "stm32h503rbt6.kicad_sym",+ "footprint": "stm32h503rbt6.kicad_mod",+ "model_3d": "stm32h503rbt6-etched.glb",+ "model_3d_plain": "stm32h503rbt6.glb",+ "model_3d_step": "stm32h503rbt6-etched.step",+ "model_3d_step_plain": "stm32h503rbt6.step",+ "lbr": "stm32h503rbt6.lbr"+ },+ "distributor_links": {+ "lcsc": "C6807804"+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery supply voltage (1.2 V to 3.6 V) for real-time clock, backup registers, and VBAT mode operation."+ },+ {+ "number": "2",+ "name": "PC13",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 13; 5V-tolerant with tamper detection, RTC output, and WKUP4 capability."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "Port C bit 14 serving as 32.768 kHz low-speed oscillator input for real-time clock; 5V-tolerant."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "Port C bit 15 serving as 32.768 kHz low-speed oscillator output for real-time clock; 5V-tolerant."+ },+ {+ "number": "5",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "Port H bit 0 serving as main oscillator input (4 to 50 MHz); 5V-tolerant."+ },+ {+ "number": "6",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "Port H bit 1 serving as main oscillator output; 5V-tolerant."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "System reset pin with embedded weak pull-up resistor, active low; bidirectional reset capability."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 0; 5V-tolerant with analog switch and ADC1_INP10 input."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 0; 5V-tolerant with analog switch, ADC1_INP11, and WKUP3 capability."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 2; 5V-tolerant with analog switch and ADC1_INP12 input."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 3; 5V-tolerant with analog switch and ADC1_INP13 input."+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference and VREF- supply; must be connected to VSS for proper analog operation."+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply (1.62 V to 3.6 V) for ADC, DAC, OPAMP, and comparator circuits."+ },+ {+ "number": "14",+ "name": "PA0",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 0; 5V-tolerant with analog switch, ADC input, and timer functions."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 1; 5V-tolerant with analog switch and ADC1_INP1 input."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 2; 5V-tolerant with analog switch, LPUART1_RX, and ADC input."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 3; 5V-tolerant with analog switch, LPUART1_TX, and ADC input."+ },+ {+ "number": "18",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground for core domain; must be connected to external ground plane."+ },+ {+ "number": "19",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply (1.71 V to 3.6 V) for core and I/O domains; requires 100 nF decoupling capacitor."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 4 (3.6V-tolerant); supports DAC1_OUT1 and ADC1_INP18."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 5 (3.6V-tolerant); supports DAC1_OUT2, ADC input, and SPI clock."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 6; 5V-tolerant with analog switch and ADC1_INP3 input."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 7 (3.6V-tolerant); supports I2S MCK and ADC1_INP7 input."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 4; 5V-tolerant with analog switch and ADC1_INP4 input."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 5 (3.6V-tolerant); supports comparator output and ADC input."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 0; 5V-tolerant with analog switch and ADC1_INP9 input."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 1; 5V-tolerant with analog switch, comparator output, and ADC input."+ },+ {+ "number": "28",+ "name": "PB2",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 2; 5V-tolerant with analog switch and comparator output."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 10; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support."+ },+ {+ "number": "30",+ "name": "VCAP",+ "type": "passive",+ "description": "External capacitor connection (2.2 µF typical) for embedded LDO regulator stabilization."+ },+ {+ "number": "31",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground for core domain; must be connected to external ground plane."+ },+ {+ "number": "32",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply (1.71 V to 3.6 V); requires 100 nF decoupling capacitor."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 12; 5V-tolerant with high-speed low-voltage mode support."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 13; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 14; 5V-tolerant with high-speed low-voltage mode support."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 15; 5V-tolerant with analog switch, ADC input, and comparator output."+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 6; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support."+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 7; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support."+ },+ {+ "number": "39",+ "name": "PC8",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 8; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support."+ },+ {+ "number": "40",+ "name": "PC9",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 9; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support."+ },+ {+ "number": "41",+ "name": "PA8",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 8; 5V-tolerant with high-speed low-voltage mode; supports MCO1 clock output."+ },+ {+ "number": "42",+ "name": "PA9",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 9; 5V-tolerant with high-speed low-voltage mode; supports LPUART1_TX."+ },+ {+ "number": "43",+ "name": "PA10",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 10; 5V-tolerant with high-speed low-voltage mode; supports LPUART1_RX."+ },+ {+ "number": "44",+ "name": "PA11",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 11; 5V-tolerant with high-speed low-voltage mode; supports USART1 or USB DM."+ },+ {+ "number": "45",+ "name": "PA12",+ "type": "bidirectional",+ "description": "General-purpose I/O port A bit 12; 5V-tolerant with high-speed low-voltage mode; supports USART1 or USB DP."+ },+ {+ "number": "46",+ "name": "PA13",+ "type": "bidirectional",+ "description": "JTAG/SWD debug interface pin (JTMS/SWDIO); 5V-tolerant with high-speed low-voltage mode."+ },+ {+ "number": "47",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground for core domain; must be connected to external ground plane."+ },+ {+ "number": "48",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply (1.71 V to 3.6 V); requires 100 nF decoupling capacitor."+ },+ {+ "number": "49",+ "name": "PA14",+ "type": "bidirectional",+ "description": "JTAG/SWD debug interface pin (JTCK/SWCLK); 5V-tolerant with high-speed low-voltage mode."+ },+ {+ "number": "50",+ "name": "PA15",+ "type": "bidirectional",+ "description": "JTAG debug interface pin (JTDI); 5V-tolerant with high-speed low-voltage mode and timer support."+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 10; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support."+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 11; 5V-tolerant Fm+ I2C capable with high-speed low-voltage mode support."+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "General-purpose I/O port C bit 12; 5V-tolerant with high-speed low-voltage mode support."+ },+ {+ "number": "54",+ "name": "PD2",+ "type": "bidirectional",+ "description": "General-purpose I/O port D bit 2; 5V-tolerant with high-speed low-voltage mode support."+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "JTAG debug interface pin (JTDO/TRACESWO); 5V-tolerant Fm+ capable with high-speed low-voltage mode."+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "JTAG debug interface pin (NJTRST); 5V-tolerant Fm+ capable with high-speed low-voltage mode."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 5; 5V-tolerant Fm+ capable with high-speed low-voltage mode support."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 6; 5V-tolerant Fm+ capable with high-speed low-voltage mode support."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 7 with WKUP5 wake-up capability; 5V-tolerant Fm+ capable with high-speed low-voltage mode."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection pin sampled during reset; high selects boot from system memory, low selects boot from flash."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "General-purpose I/O port B bit 8; 5V-tolerant Fm+ capable with high-speed low-voltage mode support."+ },+ {+ "number": "62",+ "name": "VCAP",+ "type": "passive",+ "description": "External capacitor connection (2.2 µF typical) for embedded LDO regulator stabilization."+ },+ {+ "number": "63",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground for core domain; must be connected to external ground plane."+ },+ {+ "number": "64",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply (1.71 V to 3.6 V); requires 100 nF decoupling capacitor."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Multiple VDD, VSS, VCAP, and VDDA pins present; ensure all power pins are properly decoupled on PCB ; Debug pins (PA13/JTMS, PA14/JTCK, PA15/JTDI, PB3/JTDO, PB4/NJTRST) have alternate functions and pull; BOOT0 pin (pin 60) must be sampled during reset with appropriate pull-up/pull-down; ensure stable vo"+ ],+ "pages_sent": 60,+ "cost_usd": 0.9447,+ "at": "2026-09-24T11:07:06"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903924188655616",+ "pages": 174,+ "sha256": "292aba1b6fc0225b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}