← Commit history

Initial commit: component/stm32g474vet6

Ray ·abd64c3dca ·
2 files changed +831
README.mdadded+136
@@ -0,0 +1,136 @@+# STM32G474VET6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32G474VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TRACECK, TIM3_CH1, SAI1_CK1, SPI4_SCK, TIM20_CH1, FMC_A23, SAI1_MCLK_A, EVENTOUT; floating input after reset. |+| 2 | PE3 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TRACED0, TIM3_CH2, SPI4_NSS, TIM20_CH2, FMC_A19, SAI1_SD_B, EVENTOUT; floating input after reset. |+| 3 | PE4 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TRACED1, TIM3_CH3, SAI1_D2, SPI4_NSS, TIM20_CH1N, FMC_A20, SAI1_FS_A, EVENTOUT; floating input after reset. |+| 4 | PE5 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TRACED2, TIM3_CH4, SAI1_CK2, SPI4_MISO, TIM20_CH2N, FMC_A21, SAI1_SCK_A, EVENTOUT; floating input after reset. |+| 5 | PE6 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TRACED3, SAI1_D1, SPI4_MOSI, TIM20_CH3N, FMC_A22, SAI1_SD_A, EVENTOUT, plus additional functions WKUP3 and RTC_TAMP3. |+| 6 | VBAT | power_in | Battery backup supply pin for RTC, LSE oscillator and backup registers, operating range 1.55 V to 3.6 V. |+| 7 | PC13 | bidirectional | 5V-tolerant (FT) GPIO, supplied through the internal power switch (3 mA max, output speed ≤2 MHz, load ≤30 pF, not usable as a current source); alternate functions TIM1_BKIN, TIM1_CH1N, TIM8_CH4N, EVENTOUT, plus WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT1. |+| 8 | PC14-OSC32_IN | bidirectional | 5V-tolerant (FT) GPIO supplied through the power switch (same 3 mA/2 MHz/30 pF limits as PC13); EVENTOUT alternate function and OSC32_IN 32.768 kHz crystal oscillator input additional function. |+| 9 | PC15-OSC32_OUT | bidirectional | 5V-tolerant (FT) GPIO supplied through the power switch (same 3 mA/2 MHz/30 pF limits as PC13); EVENTOUT alternate function and OSC32_OUT 32.768 kHz crystal oscillator output additional function. |+| 10 | PF9 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM20_BKIN, TIM15_CH1, SPI2_SCK, TIM5_CH4, QUADSPI1_BK1_IO1, FMC_A25, SAI1_FS_B, EVENTOUT. |+| 11 | PF10 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM20_BKIN2, TIM15_CH2, SPI2_SCK, QUADSPI1_CLK, FMC_A0, SAI1_D3, EVENTOUT. |+| 12 | PF0-OSC_IN | bidirectional | FT_fa GPIO with alternate functions I2C2_SDA, SPI2_NSS/I2S2_WS, TIM1_CH3N, EVENTOUT, plus additional functions ADC1_IN10 and OSC_IN (4 to 48 MHz HSE crystal input). |+| 13 | PF1-OSC_OUT | bidirectional | FT_a GPIO with alternate functions SPI2_SCK/I2S2_CK, EVENTOUT, plus additional functions ADC2_IN10, COMP3_INM and OSC_OUT (HSE crystal output). |+| 14 | PG10-NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor; alternatively usable as FT GPIO with MCO and EVENTOUT alternate functions, additional function NRST. |+| 15 | PC0 | bidirectional | FT_a GPIO with alternate functions LPTIM1_IN1, TIM1_CH1, LPUART1_RX, EVENTOUT, plus additional functions ADC12_IN6 and COMP3_INM. |+| 16 | PC1 | bidirectional | TT_a (3.6 V tolerant) GPIO with alternate functions LPTIM1_OUT, TIM1_CH2, LPUART1_TX, QUADSPI1_BK2_IO0, SAI1_SD_A, EVENTOUT, plus additional functions ADC12_IN7 and COMP3_INP. |+| 17 | PC2 | bidirectional | FT_a GPIO with alternate functions LPTIM1_IN2, TIM1_CH3, COMP3_OUT, TIM20_CH2, QUADSPI1_BK2_IO1, EVENTOUT, plus additional function ADC12_IN8. |+| 18 | PC3 | bidirectional | TT_a GPIO with alternate functions LPTIM1_ETR, TIM1_CH4, SAI1_D1, TIM1_BKIN2, QUADSPI1_BK2_IO2, SAI1_SD_A, EVENTOUT, plus additional functions ADC12_IN9 and OPAMP5_VINP. |+| 19 | PF2 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM20_CH3, I2C2_SMBA, FMC_A2, EVENTOUT. |+| 20 | PA0 | bidirectional | TT_a GPIO with alternate functions TIM2_CH1, TIM5_CH1, USART2_CTS, COMP1_OUT, TIM8_BKIN, TIM8_ETR, TIM2_ETR, EVENTOUT, plus additional functions ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2, WKUP1. |+| 21 | PA1 | bidirectional | TT_a GPIO with alternate functions RTC_REFIN, TIM2_CH2, TIM5_CH2, USART2_RTS_DE, TIM15_CH1N, EVENTOUT, plus additional functions ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP, OPAMP6_VINM. |+| 22 | PA2 | bidirectional | FT_a GPIO with alternate functions TIM2_CH3, TIM5_CH3, USART2_TX, COMP2_OUT, TIM15_CH1, QUADSPI1_BK1_NCS, LPUART1_TX, UCPD1_FRSTX, EVENTOUT, plus additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT, WKUP4/LSCO. |+| 23 | VSS | power_in | Ground reference pin. |+| 24 | VDD | power_in | Digital power supply pin, operating range 1.71 V to 3.6 V. |+| 25 | PA3 | bidirectional | TT_a GPIO with alternate functions TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX, TIM15_CH2, QUADSPI1_CLK, LPUART1_RX, SAI1_MCLK_A, EVENTOUT, plus additional functions ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP, OPAMP5_VINM. |+| 26 | PA4 | bidirectional | TT_a GPIO with alternate functions TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, SAI1_FS_B, EVENTOUT, plus additional functions ADC2_IN17, DAC1_OUT1, COMP1_INM. |+| 27 | PA5 | bidirectional | TT_a GPIO with alternate functions TIM2_CH1, TIM2_ETR, SPI1_SCK, UCPD1_FRSTX, EVENTOUT, plus additional functions ADC2_IN13, DAC1_OUT2, COMP2_INM, OPAMP2_VINM. |+| 28 | PA6 | bidirectional | TT_a GPIO with alternate functions TIM16_CH1, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM1_BKIN, COMP1_OUT, QUADSPI1_BK1_IO3, LPUART1_CTS, EVENTOUT, plus additional functions ADC2_IN3, DAC2_OUT1, OPAMP2_VOUT. |+| 29 | PA7 | bidirectional | TT_a GPIO with alternate functions TIM17_CH1, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM1_CH1N, COMP2_OUT, QUADSPI1_BK1_IO2, UCPD1_FRSTX, EVENTOUT, plus additional functions ADC2_IN4, COMP2_INP, OPAMP1_VINP, OPAMP2_VINP. |+| 30 | PC4 | bidirectional | FT_fa (Fm+ I2C capable, analog switch) GPIO with alternate functions TIM1_ETR, I2C2_SCL, USART1_TX, QUADSPI1_BK2_IO3, EVENTOUT, plus additional function ADC2_IN5. |+| 31 | PC5 | bidirectional | TT_a GPIO with alternate functions TIM15_BKIN, SAI1_D3, TIM1_CH4N, USART1_RX, HRTIM1_EEV10, EVENTOUT, plus additional functions ADC2_IN11, OPAMP1_VINM, OPAMP2_VINM, WKUP5. |+| 32 | PB0 | bidirectional | TT_a GPIO with alternate functions TIM3_CH3, TIM8_CH2N, TIM1_CH2N, QUADSPI1_BK1_IO1, HRTIM1_FLT5, UCPD1_FRSTX, EVENTOUT, plus additional functions ADC3_IN12/ADC1_IN15, COMP4_INP, OPAMP2_VINP, OPAMP3_VINP. |+| 33 | PB1 | bidirectional | TT_a GPIO with alternate functions TIM3_CH4, TIM8_CH3N, TIM1_CH3N, COMP4_OUT, QUADSPI1_BK1_IO0, LPUART1_RTS_DE, HRTIM1_SCOUT, EVENTOUT, plus additional functions ADC3_IN1/ADC1_IN12, COMP1_INP, OPAMP3_VOUT, OPAMP6_VINM. |+| 34 | PB2 | bidirectional | TT_a GPIO with alternate functions RTC_OUT2, LPTIM1_OUT, TIM5_CH1, TIM20_CH1, I2C3_SMBA, QUADSPI1_BK2_IO1, HRTIM1_SCIN, EVENTOUT, plus additional functions ADC2_IN12, COMP4_INM, OPAMP3_VINM. |+| 35 | VSSA | power_in | Analog ground reference pin for ADC/DAC/comparators/opamps. |+| 36 | VREF+ | power_in | Positive analog reference voltage supply pin for ADC/DAC (may be internally tied to VDDA depending on package); also carries the internal VREFBUF_OUT reference buffer output, VREF+ must not exceed VDDA by more than 0.4 V. |+| 37 | VDDA | power_in | Analog power supply pin for ADC, DAC, OPAMP, COMP and VREFBUF; usable range 1.62 V to 3.6 V depending on which analog peripheral is used (see operating-conditions table). |+| 38 | PE7 | bidirectional | TT_a GPIO with alternate functions TIM1_ETR, FMC_D4, SAI1_SD_B, EVENTOUT, plus additional functions ADC3_IN4 and COMP4_INP. |+| 39 | PE8 | bidirectional | FT_a GPIO with alternate functions TIM5_CH3, TIM1_CH1N, FMC_D5, SAI1_SCK_B, EVENTOUT, plus additional functions ADC345_IN6 and COMP4_INM. |+| 40 | PE9 | bidirectional | FT_a GPIO with alternate functions TIM5_CH4, TIM1_CH1, FMC_D6, SAI1_FS_B, EVENTOUT, plus additional function ADC3_IN2. |+| 41 | PE10 | bidirectional | FT_a GPIO with alternate functions TIM1_CH2N, QUADSPI1_CLK, FMC_D7, SAI1_MCLK_B, EVENTOUT, plus additional function ADC345_IN14. |+| 42 | PE11 | bidirectional | FT_a GPIO with alternate functions TIM1_CH2, SPI4_NSS, QUADSPI1_BK1_NCS, FMC_D8, EVENTOUT, plus additional function ADC345_IN15. |+| 43 | PE12 | bidirectional | FT_a GPIO with alternate functions TIM1_CH3N, SPI4_SCK, QUADSPI1_BK1_IO0, FMC_D9, EVENTOUT, plus additional function ADC345_IN16. |+| 44 | PE13 | bidirectional | FT_a GPIO with alternate functions TIM1_CH3, SPI4_MISO, QUADSPI1_BK1_IO1, FMC_D10, EVENTOUT, plus additional function ADC3_IN3. |+| 45 | PE14 | bidirectional | FT_a GPIO with alternate functions TIM1_CH4, SPI4_MOSI, TIM1_BKIN2, QUADSPI1_BK1_IO2, FMC_D11, EVENTOUT, plus additional function ADC4_IN1. |+| 46 | PE15 | bidirectional | FT_a GPIO with alternate functions TIM1_BKIN, TIM1_CH4N, USART3_RX, QUADSPI1_BK1_IO3, FMC_D12, EVENTOUT, plus additional function ADC4_IN2. |+| 47 | PB10 | bidirectional | TT_a GPIO with alternate functions TIM2_CH3, USART3_TX, LPUART1_RX, QUADSPI1_CLK, TIM1_BKIN, HRTIM1_FLT3, SAI1_SCK_A, EVENTOUT, plus additional functions COMP5_INM, OPAMP3_VINM, OPAMP4_VINM. |+| 48 | VSS | power_in | Ground reference pin. |+| 49 | VDD | power_in | Digital power supply pin, operating range 1.71 V to 3.6 V. |+| 50 | PB11 | bidirectional | TT_a GPIO with alternate functions TIM2_CH4, USART3_RX, LPUART1_TX, QUADSPI1_BK1_NCS, HRTIM1_FLT4, EVENTOUT, plus additional functions ADC12_IN14, COMP6_INP, OPAMP4_VINP, OPAMP6_VOUT. |+| 51 | PB12 | bidirectional | TT_a GPIO with alternate functions TIM5_ETR, I2C2_SMBA, SPI2_NSS/I2S2_WS, TIM1_BKIN, USART3_CK, LPUART1_RTS_DE, FDCAN2_RX, HRTIM1_CHC1, EVENTOUT, plus additional functions ADC4_IN3/ADC1_IN11, COMP7_INM, OPAMP4_VOUT, OPAMP6_VINP. |+| 52 | PB13 | bidirectional | TT_a GPIO with alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, LPUART1_CTS, FDCAN2_TX, HRTIM1_CHC2, EVENTOUT, plus additional functions ADC3_IN5, COMP5_INP, OPAMP3_VINP, OPAMP4_VINP, OPAMP6_VINP. |+| 53 | PB14 | bidirectional | TT_a GPIO with alternate functions TIM15_CH1, SPI2_MISO, TIM1_CH2N, USART3_RTS_DE, COMP4_OUT, HRTIM1_CHD1, EVENTOUT, plus additional functions ADC4_IN4/ADC1_IN5, COMP7_INP, OPAMP2_VINP, OPAMP5_VINP. |+| 54 | PB15 | bidirectional | TT_a GPIO with alternate functions RTC_REFIN, TIM15_CH2, TIM15_CH1N, COMP3_OUT, TIM1_CH3N, SPI2_MOSI/I2S2_SD, HRTIM1_CHD2, EVENTOUT, plus additional functions ADC4_IN5/ADC2_IN15, COMP6_INM, OPAMP5_VINM. |+| 55 | PD8 | bidirectional | TT_a GPIO with alternate functions USART3_TX, FMC_D13, EVENTOUT, plus additional functions ADC4_IN12/ADC5_IN12 and OPAMP4_VINM. |+| 56 | PD9 | bidirectional | TT_a GPIO with alternate functions USART3_RX, FMC_D14, EVENTOUT, plus additional functions ADC4_IN13/ADC5_IN13 and OPAMP6_VINP. |+| 57 | PD10 | bidirectional | FT_a GPIO with alternate functions USART3_CK, FMC_D15, EVENTOUT, plus additional functions ADC345_IN7 and COMP6_INM. |+| 58 | PD11 | bidirectional | TT_a GPIO with alternate functions TIM5_ETR, I2C4_SMBA, USART3_CTS, FMC_A16, EVENTOUT, plus additional functions ADC345_IN8, COMP6_INP, OPAMP4_VINP. |+| 59 | PD12 | bidirectional | TT_a GPIO with alternate functions TIM4_CH1, USART3_RTS_DE, FMC_A17, EVENTOUT, plus additional functions ADC345_IN9, COMP5_INP, OPAMP5_VINP. |+| 60 | PD13 | bidirectional | FT_a GPIO with alternate functions TIM4_CH2, FMC_A18, EVENTOUT, plus additional functions ADC345_IN10 and COMP5_INM. |+| 61 | PD14 | bidirectional | TT_a GPIO with alternate functions TIM4_CH3, FMC_D0, EVENTOUT, plus additional functions ADC345_IN11, COMP7_INP, OPAMP2_VINP. |+| 62 | PD15 | bidirectional | FT_a GPIO with alternate functions TIM4_CH4, SPI2_NSS, FMC_D1, EVENTOUT, plus additional function COMP7_INM. |+| 63 | VSS | power_in | Ground reference pin. |+| 64 | VDD | power_in | Digital power supply pin, operating range 1.71 V to 3.6 V. |+| 65 | PC6 | bidirectional | FT_f (Fm+ I2C capable) GPIO with alternate functions TIM3_CH1, HRTIM1_EEV10, TIM8_CH1, I2S2_MCK, COMP6_OUT, I2C4_SCL, HRTIM1_CHF1, EVENTOUT. |+| 66 | PC7 | bidirectional | FT_f GPIO with alternate functions TIM3_CH2, HRTIM1_FLT5, TIM8_CH2, I2S3_MCK, COMP5_OUT, I2C4_SDA, HRTIM1_CHF2, EVENTOUT. |+| 67 | PC8 | bidirectional | FT_f GPIO with alternate functions TIM3_CH3, HRTIM1_CHE1, TIM8_CH3, TIM20_CH3, COMP7_OUT, I2C3_SCL, EVENTOUT. |+| 68 | PC9 | bidirectional | FT_f GPIO with alternate functions TIM3_CH4, HRTIM1_CHE2, TIM8_CH4, I2SCKIN, TIM8_BKIN2, I2C3_SDA, EVENTOUT. |+| 69 | PA8 | bidirectional | FT_a GPIO with alternate functions MCO, I2C3_SCL, I2C2_SDA, I2S2_MCK, TIM1_CH1, USART1_CK, COMP7_OUT, TIM4_ETR, FDCAN3_RX, SAI1_CK2, HRTIM1_CHA1, SAI1_SCK_A, EVENTOUT, plus additional functions ADC5_IN1 and OPAMP5_VOUT. |+| 70 | PA9 | bidirectional | FT_fda (Fm+, USB Type-C dead-battery, analog) GPIO with alternate functions I2C3_SMBA, I2C2_SCL, I2S3_MCK, TIM1_CH2, USART1_TX, COMP5_OUT, TIM15_BKIN, TIM2_CH3, HRTIM1_CHA2, SAI1_FS_A, EVENTOUT, plus additional functions ADC5_IN2 and UCPD1_DBCC1. |+| 71 | PA10 | bidirectional | FT_fda GPIO with alternate functions TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX, COMP6_OUT, TIM2_CH4, TIM8_BKIN, SAI1_D1, HRTIM1_CHB1, SAI1_SD_A, EVENTOUT, plus additional function UCPD1_DBCC2. |+| 72 | PA11 | bidirectional | FT_u (USB-capable) GPIO with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX, TIM4_CH1, TIM1_CH4, TIM1_BKIN2, HRTIM1_CHB2, EVENTOUT, plus additional function USB_DM. |+| 73 | PA12 | bidirectional | FT_u GPIO with alternate functions TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX, TIM4_CH2, TIM1_ETR, HRTIM1_FLT1, EVENTOUT, plus additional function USB_DP. |+| 74 | VSS | power_in | Ground reference pin. |+| 75 | VDD | power_in | Digital power supply pin, operating range 1.71 V to 3.6 V. |+| 76 | PA13 | bidirectional | FT_f GPIO configured after reset as SWDIO-JTMS debug function with internal pull-up activated; other alternate functions TIM16_CH1N, I2C4_SCL, I2C1_SCL, IR_OUT, USART3_CTS, TIM4_CH3, SAI1_SD_B, EVENTOUT. |+| 77 | PA14 | bidirectional | FT_f GPIO configured after reset as SWCLK-JTCK debug function with internal pull-down activated; other alternate functions LPTIM1_OUT, I2C4_SMBA, I2C1_SDA, TIM8_CH2, TIM1_BKIN, USART2_TX, SAI1_FS_B, EVENTOUT. |+| 78 | PA15 | bidirectional | FT_f GPIO configured after reset as JTDI debug function with internal pull-up activated; other alternate functions TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, UART4_RTS_DE, TIM1_BKIN, FDCAN3_TX, HRTIM1_FLT2, TIM2_ETR, EVENTOUT. |+| 79 | PC10 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM8_CH1N, UART4_TX, SPI3_SCK/I2S3_CK, USART3_TX, HRTIM1_FLT6, EVENTOUT. |+| 80 | PC11 | bidirectional | FT_f GPIO with alternate functions HRTIM1_EEV2, TIM8_CH2N, UART4_RX, SPI3_MISO, USART3_RX, I2C3_SDA, EVENTOUT. |+| 81 | PC12 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM5_CH2, HRTIM1_EEV1, TIM8_CH3N, UART5_TX, SPI3_MOSI/I2S3_SD, USART3_CK, UCPD1_FRSTX, EVENTOUT. |+| 82 | PD0 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM8_CH4N, FDCAN1_RX, FMC_D2, EVENTOUT. |+| 83 | PD1 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM8_CH4, TIM8_BKIN2, FDCAN1_TX, FMC_D3, EVENTOUT. |+| 84 | PD2 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM3_ETR, TIM8_BKIN, UART5_RX, EVENTOUT. |+| 85 | PD3 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM2_CH1/TIM2_ETR, USART2_CTS, QUADSPI1_BK2_NCS, FMC_CLK, EVENTOUT. |+| 86 | PD4 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM2_CH2, USART2_RTS_DE, QUADSPI1_BK2_IO0, FMC_NOE, EVENTOUT. |+| 87 | PD5 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions USART2_TX, QUADSPI1_BK2_IO1, FMC_NWE, EVENTOUT. |+| 88 | PD6 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM2_CH4, SAI1_D1, USART2_RX, QUADSPI1_BK2_IO2, FMC_NWAIT, SAI1_SD_A, EVENTOUT. |+| 89 | PD7 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM2_CH3, USART2_CK, QUADSPI1_BK2_IO3, FMC_NCE/FMC_NE1, EVENTOUT. |+| 90 | PB3 | bidirectional | 5V-tolerant (FT) GPIO configured after reset as JTDO-TRACESWO debug function with internal pull-up activated; other alternate functions TIM2_CH2, TIM4_ETR, UCPD1_CRS_SYNC, TIM8_CH1N, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR, FDCAN3_RX, HRTIM1_SCOUT, HRTIM1_EEV9, SAI1_SCK_B, EVENTOUT. |+| 91 | PB4 | bidirectional | FT_c (USB Type-C PD capable) GPIO configured after reset as JTRST debug function with internal pull-up activated; other alternate functions TIM16_CH1, TIM3_CH1, TIM8_CH2N, SPI1_MISO, SPI3_MISO, USART2_RX, UART5_RTS_DE, TIM17_BKIN, FDCAN3_TX, HRTIM1_EEV7, SAI1_MCLK_B, EVENTOUT, plus additional function UCPD1_CC2. |+| 92 | PB5 | bidirectional | FT_f GPIO with alternate functions TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, FDCAN2_RX, TIM17_CH1, LPTIM1_IN1, SAI1_SD_B, HRTIM1_EEV6, UART5_CTS, EVENTOUT. |+| 93 | PB6 | bidirectional | FT_c (USB Type-C PD capable) GPIO with alternate functions TIM16_CH1N, TIM4_CH1, TIM8_CH1, TIM8_ETR, USART1_TX, COMP4_OUT, FDCAN2_TX, TIM8_BKIN2, LPTIM1_ETR, HRTIM1_SCIN, HRTIM1_EEV4, SAI1_FS_B, EVENTOUT, plus additional function UCPD1_CC1. |+| 94 | PB7 | bidirectional | FT_f GPIO with alternate functions TIM17_CH1N, TIM4_CH2, I2C4_SDA, I2C1_SDA, TIM8_BKIN, USART1_RX, COMP3_OUT, TIM3_CH4, LPTIM1_IN2, FMC_NL, HRTIM1_EEV3, UART4_CTS, EVENTOUT, plus additional function PVD_IN. |+| 95 | PB8-BOOT0 | bidirectional | FT_f GPIO/dedicated BOOT0 pin; alternate functions TIM16_CH1, TIM4_CH3, SAI1_CK1, I2C1_SCL, USART3_RX, COMP1_OUT, FDCAN1_RX, TIM8_CH2, TIM1_BKIN, HRTIM1_EEV8, SAI1_MCLK_A, EVENTOUT; datasheet recommends setting PB8 to a non-analog mode after startup if left unconnected, to limit consumption. |+| 96 | PB9 | bidirectional | FT_f GPIO with alternate functions TIM17_CH1, TIM4_CH4, SAI1_D2, I2C1_SDA, IR_OUT, USART3_TX, COMP2_OUT, FDCAN1_TX, TIM8_CH3, TIM1_CH3N, HRTIM1_EEV5, SAI1_FS_A, EVENTOUT. |+| 97 | PE0 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM4_ETR, TIM20_CH4N, TIM16_CH1, TIM20_ETR, USART1_TX, FMC_NBL0, EVENTOUT. |+| 98 | PE1 | bidirectional | 5V-tolerant (FT) GPIO with alternate functions TIM17_CH1, TIM20_CH4, USART1_RX, FMC_NBL1, EVENTOUT. |+| 99 | VSS | power_in | Ground reference pin. |+| 100 | VDD | power_in | Digital power supply pin, operating range 1.71 V to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32G474VET6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32g474vet6-etched.step` / `stm32g474vet6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g474vet6.step` / `stm32g474vet6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884401510236160) (236 pp, sha256 `d493fe0ab22e61ff`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g474vet6-datasheet.pdf)
page.jsonadded+695
@@ -0,0 +1,695 @@+{+  "slug": "stm32g474vet6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32g474vet6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32g474vet6.kicad_sym",+    "stm32g474vet6.kicad_mod",+    "stm32g474vet6.glb",+    "stm32g474vet6.step",+    "stm32g474vet6.lbr",+    "docs/hero.png",+    "docs/stm32g474vet6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32G474VET6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-100(14x14)",+    "pin_count": 100,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884401510236160",+    "parts": {+      "symbol": "stm32g474vet6.kicad_sym",+      "footprint": "stm32g474vet6.kicad_mod",+      "model_3d": "stm32g474vet6-etched.glb",+      "model_3d_plain": "stm32g474vet6.glb",+      "model_3d_step": "stm32g474vet6-etched.step",+      "model_3d_step_plain": "stm32g474vet6.step",+      "lbr": "stm32g474vet6.lbr"+    },+    "distributor_links": {+      "lcsc": "C431632"+    },+    "pins": [+      {+        "number": "1",+        "name": "PE2",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TRACECK, TIM3_CH1, SAI1_CK1, SPI4_SCK, TIM20_CH1, FMC_A23, SAI1_MCLK_A, EVENTOUT; floating input after reset."+      },+      {+        "number": "2",+        "name": "PE3",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TRACED0, TIM3_CH2, SPI4_NSS, TIM20_CH2, FMC_A19, SAI1_SD_B, EVENTOUT; floating input after reset."+      },+      {+        "number": "3",+        "name": "PE4",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TRACED1, TIM3_CH3, SAI1_D2, SPI4_NSS, TIM20_CH1N, FMC_A20, SAI1_FS_A, EVENTOUT; floating input after reset."+      },+      {+        "number": "4",+        "name": "PE5",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TRACED2, TIM3_CH4, SAI1_CK2, SPI4_MISO, TIM20_CH2N, FMC_A21, SAI1_SCK_A, EVENTOUT; floating input after reset."+      },+      {+        "number": "5",+        "name": "PE6",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TRACED3, SAI1_D1, SPI4_MOSI, TIM20_CH3N, FMC_A22, SAI1_SD_A, EVENTOUT, plus additional functions WKUP3 and RTC_TAMP3."+      },+      {+        "number": "6",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery backup supply pin for RTC, LSE oscillator and backup registers, operating range 1.55 V to 3.6 V."+      },+      {+        "number": "7",+        "name": "PC13",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO, supplied through the internal power switch (3 mA max, output speed ≤2 MHz, load ≤30 pF, not usable as a current source); alternate functions TIM1_BKIN, TIM1_CH1N, TIM8_CH4N, EVENTOUT, plus WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT1."+      },+      {+        "number": "8",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO supplied through the power switch (same 3 mA/2 MHz/30 pF limits as PC13); EVENTOUT alternate function and OSC32_IN 32.768 kHz crystal oscillator input additional function."+      },+      {+        "number": "9",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO supplied through the power switch (same 3 mA/2 MHz/30 pF limits as PC13); EVENTOUT alternate function and OSC32_OUT 32.768 kHz crystal oscillator output additional function."+      },+      {+        "number": "10",+        "name": "PF9",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM20_BKIN, TIM15_CH1, SPI2_SCK, TIM5_CH4, QUADSPI1_BK1_IO1, FMC_A25, SAI1_FS_B, EVENTOUT."+      },+      {+        "number": "11",+        "name": "PF10",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM20_BKIN2, TIM15_CH2, SPI2_SCK, QUADSPI1_CLK, FMC_A0, SAI1_D3, EVENTOUT."+      },+      {+        "number": "12",+        "name": "PF0-OSC_IN",+        "type": "bidirectional",+        "description": "FT_fa GPIO with alternate functions I2C2_SDA, SPI2_NSS/I2S2_WS, TIM1_CH3N, EVENTOUT, plus additional functions ADC1_IN10 and OSC_IN (4 to 48 MHz HSE crystal input)."+      },+      {+        "number": "13",+        "name": "PF1-OSC_OUT",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions SPI2_SCK/I2S2_CK, EVENTOUT, plus additional functions ADC2_IN10, COMP3_INM and OSC_OUT (HSE crystal output)."+      },+      {+        "number": "14",+        "name": "PG10-NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with embedded weak pull-up resistor; alternatively usable as FT GPIO with MCO and EVENTOUT alternate functions, additional function NRST."+      },+      {+        "number": "15",+        "name": "PC0",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions LPTIM1_IN1, TIM1_CH1, LPUART1_RX, EVENTOUT, plus additional functions ADC12_IN6 and COMP3_INM."+      },+      {+        "number": "16",+        "name": "PC1",+        "type": "bidirectional",+        "description": "TT_a (3.6 V tolerant) GPIO with alternate functions LPTIM1_OUT, TIM1_CH2, LPUART1_TX, QUADSPI1_BK2_IO0, SAI1_SD_A, EVENTOUT, plus additional functions ADC12_IN7 and COMP3_INP."+      },+      {+        "number": "17",+        "name": "PC2",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions LPTIM1_IN2, TIM1_CH3, COMP3_OUT, TIM20_CH2, QUADSPI1_BK2_IO1, EVENTOUT, plus additional function ADC12_IN8."+      },+      {+        "number": "18",+        "name": "PC3",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions LPTIM1_ETR, TIM1_CH4, SAI1_D1, TIM1_BKIN2, QUADSPI1_BK2_IO2, SAI1_SD_A, EVENTOUT, plus additional functions ADC12_IN9 and OPAMP5_VINP."+      },+      {+        "number": "19",+        "name": "PF2",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM20_CH3, I2C2_SMBA, FMC_A2, EVENTOUT."+      },+      {+        "number": "20",+        "name": "PA0",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM2_CH1, TIM5_CH1, USART2_CTS, COMP1_OUT, TIM8_BKIN, TIM8_ETR, TIM2_ETR, EVENTOUT, plus additional functions ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2, WKUP1."+      },+      {+        "number": "21",+        "name": "PA1",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions RTC_REFIN, TIM2_CH2, TIM5_CH2, USART2_RTS_DE, TIM15_CH1N, EVENTOUT, plus additional functions ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP, OPAMP6_VINM."+      },+      {+        "number": "22",+        "name": "PA2",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM2_CH3, TIM5_CH3, USART2_TX, COMP2_OUT, TIM15_CH1, QUADSPI1_BK1_NCS, LPUART1_TX, UCPD1_FRSTX, EVENTOUT, plus additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT, WKUP4/LSCO."+      },+      {+        "number": "23",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin."+      },+      {+        "number": "24",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, operating range 1.71 V to 3.6 V."+      },+      {+        "number": "25",+        "name": "PA3",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX, TIM15_CH2, QUADSPI1_CLK, LPUART1_RX, SAI1_MCLK_A, EVENTOUT, plus additional functions ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP, OPAMP5_VINM."+      },+      {+        "number": "26",+        "name": "PA4",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, SAI1_FS_B, EVENTOUT, plus additional functions ADC2_IN17, DAC1_OUT1, COMP1_INM."+      },+      {+        "number": "27",+        "name": "PA5",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM2_CH1, TIM2_ETR, SPI1_SCK, UCPD1_FRSTX, EVENTOUT, plus additional functions ADC2_IN13, DAC1_OUT2, COMP2_INM, OPAMP2_VINM."+      },+      {+        "number": "28",+        "name": "PA6",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM16_CH1, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM1_BKIN, COMP1_OUT, QUADSPI1_BK1_IO3, LPUART1_CTS, EVENTOUT, plus additional functions ADC2_IN3, DAC2_OUT1, OPAMP2_VOUT."+      },+      {+        "number": "29",+        "name": "PA7",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM17_CH1, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM1_CH1N, COMP2_OUT, QUADSPI1_BK1_IO2, UCPD1_FRSTX, EVENTOUT, plus additional functions ADC2_IN4, COMP2_INP, OPAMP1_VINP, OPAMP2_VINP."+      },+      {+        "number": "30",+        "name": "PC4",+        "type": "bidirectional",+        "description": "FT_fa (Fm+ I2C capable, analog switch) GPIO with alternate functions TIM1_ETR, I2C2_SCL, USART1_TX, QUADSPI1_BK2_IO3, EVENTOUT, plus additional function ADC2_IN5."+      },+      {+        "number": "31",+        "name": "PC5",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM15_BKIN, SAI1_D3, TIM1_CH4N, USART1_RX, HRTIM1_EEV10, EVENTOUT, plus additional functions ADC2_IN11, OPAMP1_VINM, OPAMP2_VINM, WKUP5."+      },+      {+        "number": "32",+        "name": "PB0",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM3_CH3, TIM8_CH2N, TIM1_CH2N, QUADSPI1_BK1_IO1, HRTIM1_FLT5, UCPD1_FRSTX, EVENTOUT, plus additional functions ADC3_IN12/ADC1_IN15, COMP4_INP, OPAMP2_VINP, OPAMP3_VINP."+      },+      {+        "number": "33",+        "name": "PB1",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM3_CH4, TIM8_CH3N, TIM1_CH3N, COMP4_OUT, QUADSPI1_BK1_IO0, LPUART1_RTS_DE, HRTIM1_SCOUT, EVENTOUT, plus additional functions ADC3_IN1/ADC1_IN12, COMP1_INP, OPAMP3_VOUT, OPAMP6_VINM."+      },+      {+        "number": "34",+        "name": "PB2",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions RTC_OUT2, LPTIM1_OUT, TIM5_CH1, TIM20_CH1, I2C3_SMBA, QUADSPI1_BK2_IO1, HRTIM1_SCIN, EVENTOUT, plus additional functions ADC2_IN12, COMP4_INM, OPAMP3_VINM."+      },+      {+        "number": "35",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference pin for ADC/DAC/comparators/opamps."+      },+      {+        "number": "36",+        "name": "VREF+",+        "type": "power_in",+        "description": "Positive analog reference voltage supply pin for ADC/DAC (may be internally tied to VDDA depending on package); also carries the internal VREFBUF_OUT reference buffer output, VREF+ must not exceed VDDA by more than 0.4 V."+      },+      {+        "number": "37",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin for ADC, DAC, OPAMP, COMP and VREFBUF; usable range 1.62 V to 3.6 V depending on which analog peripheral is used (see operating-conditions table)."+      },+      {+        "number": "38",+        "name": "PE7",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM1_ETR, FMC_D4, SAI1_SD_B, EVENTOUT, plus additional functions ADC3_IN4 and COMP4_INP."+      },+      {+        "number": "39",+        "name": "PE8",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM5_CH3, TIM1_CH1N, FMC_D5, SAI1_SCK_B, EVENTOUT, plus additional functions ADC345_IN6 and COMP4_INM."+      },+      {+        "number": "40",+        "name": "PE9",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM5_CH4, TIM1_CH1, FMC_D6, SAI1_FS_B, EVENTOUT, plus additional function ADC3_IN2."+      },+      {+        "number": "41",+        "name": "PE10",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM1_CH2N, QUADSPI1_CLK, FMC_D7, SAI1_MCLK_B, EVENTOUT, plus additional function ADC345_IN14."+      },+      {+        "number": "42",+        "name": "PE11",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM1_CH2, SPI4_NSS, QUADSPI1_BK1_NCS, FMC_D8, EVENTOUT, plus additional function ADC345_IN15."+      },+      {+        "number": "43",+        "name": "PE12",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM1_CH3N, SPI4_SCK, QUADSPI1_BK1_IO0, FMC_D9, EVENTOUT, plus additional function ADC345_IN16."+      },+      {+        "number": "44",+        "name": "PE13",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM1_CH3, SPI4_MISO, QUADSPI1_BK1_IO1, FMC_D10, EVENTOUT, plus additional function ADC3_IN3."+      },+      {+        "number": "45",+        "name": "PE14",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM1_CH4, SPI4_MOSI, TIM1_BKIN2, QUADSPI1_BK1_IO2, FMC_D11, EVENTOUT, plus additional function ADC4_IN1."+      },+      {+        "number": "46",+        "name": "PE15",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM1_BKIN, TIM1_CH4N, USART3_RX, QUADSPI1_BK1_IO3, FMC_D12, EVENTOUT, plus additional function ADC4_IN2."+      },+      {+        "number": "47",+        "name": "PB10",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM2_CH3, USART3_TX, LPUART1_RX, QUADSPI1_CLK, TIM1_BKIN, HRTIM1_FLT3, SAI1_SCK_A, EVENTOUT, plus additional functions COMP5_INM, OPAMP3_VINM, OPAMP4_VINM."+      },+      {+        "number": "48",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin."+      },+      {+        "number": "49",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, operating range 1.71 V to 3.6 V."+      },+      {+        "number": "50",+        "name": "PB11",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM2_CH4, USART3_RX, LPUART1_TX, QUADSPI1_BK1_NCS, HRTIM1_FLT4, EVENTOUT, plus additional functions ADC12_IN14, COMP6_INP, OPAMP4_VINP, OPAMP6_VOUT."+      },+      {+        "number": "51",+        "name": "PB12",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM5_ETR, I2C2_SMBA, SPI2_NSS/I2S2_WS, TIM1_BKIN, USART3_CK, LPUART1_RTS_DE, FDCAN2_RX, HRTIM1_CHC1, EVENTOUT, plus additional functions ADC4_IN3/ADC1_IN11, COMP7_INM, OPAMP4_VOUT, OPAMP6_VINP."+      },+      {+        "number": "52",+        "name": "PB13",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, LPUART1_CTS, FDCAN2_TX, HRTIM1_CHC2, EVENTOUT, plus additional functions ADC3_IN5, COMP5_INP, OPAMP3_VINP, OPAMP4_VINP, OPAMP6_VINP."+      },+      {+        "number": "53",+        "name": "PB14",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM15_CH1, SPI2_MISO, TIM1_CH2N, USART3_RTS_DE, COMP4_OUT, HRTIM1_CHD1, EVENTOUT, plus additional functions ADC4_IN4/ADC1_IN5, COMP7_INP, OPAMP2_VINP, OPAMP5_VINP."+      },+      {+        "number": "54",+        "name": "PB15",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions RTC_REFIN, TIM15_CH2, TIM15_CH1N, COMP3_OUT, TIM1_CH3N, SPI2_MOSI/I2S2_SD, HRTIM1_CHD2, EVENTOUT, plus additional functions ADC4_IN5/ADC2_IN15, COMP6_INM, OPAMP5_VINM."+      },+      {+        "number": "55",+        "name": "PD8",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions USART3_TX, FMC_D13, EVENTOUT, plus additional functions ADC4_IN12/ADC5_IN12 and OPAMP4_VINM."+      },+      {+        "number": "56",+        "name": "PD9",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions USART3_RX, FMC_D14, EVENTOUT, plus additional functions ADC4_IN13/ADC5_IN13 and OPAMP6_VINP."+      },+      {+        "number": "57",+        "name": "PD10",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions USART3_CK, FMC_D15, EVENTOUT, plus additional functions ADC345_IN7 and COMP6_INM."+      },+      {+        "number": "58",+        "name": "PD11",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM5_ETR, I2C4_SMBA, USART3_CTS, FMC_A16, EVENTOUT, plus additional functions ADC345_IN8, COMP6_INP, OPAMP4_VINP."+      },+      {+        "number": "59",+        "name": "PD12",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM4_CH1, USART3_RTS_DE, FMC_A17, EVENTOUT, plus additional functions ADC345_IN9, COMP5_INP, OPAMP5_VINP."+      },+      {+        "number": "60",+        "name": "PD13",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM4_CH2, FMC_A18, EVENTOUT, plus additional functions ADC345_IN10 and COMP5_INM."+      },+      {+        "number": "61",+        "name": "PD14",+        "type": "bidirectional",+        "description": "TT_a GPIO with alternate functions TIM4_CH3, FMC_D0, EVENTOUT, plus additional functions ADC345_IN11, COMP7_INP, OPAMP2_VINP."+      },+      {+        "number": "62",+        "name": "PD15",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions TIM4_CH4, SPI2_NSS, FMC_D1, EVENTOUT, plus additional function COMP7_INM."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, operating range 1.71 V to 3.6 V."+      },+      {+        "number": "65",+        "name": "PC6",+        "type": "bidirectional",+        "description": "FT_f (Fm+ I2C capable) GPIO with alternate functions TIM3_CH1, HRTIM1_EEV10, TIM8_CH1, I2S2_MCK, COMP6_OUT, I2C4_SCL, HRTIM1_CHF1, EVENTOUT."+      },+      {+        "number": "66",+        "name": "PC7",+        "type": "bidirectional",+        "description": "FT_f GPIO with alternate functions TIM3_CH2, HRTIM1_FLT5, TIM8_CH2, I2S3_MCK, COMP5_OUT, I2C4_SDA, HRTIM1_CHF2, EVENTOUT."+      },+      {+        "number": "67",+        "name": "PC8",+        "type": "bidirectional",+        "description": "FT_f GPIO with alternate functions TIM3_CH3, HRTIM1_CHE1, TIM8_CH3, TIM20_CH3, COMP7_OUT, I2C3_SCL, EVENTOUT."+      },+      {+        "number": "68",+        "name": "PC9",+        "type": "bidirectional",+        "description": "FT_f GPIO with alternate functions TIM3_CH4, HRTIM1_CHE2, TIM8_CH4, I2SCKIN, TIM8_BKIN2, I2C3_SDA, EVENTOUT."+      },+      {+        "number": "69",+        "name": "PA8",+        "type": "bidirectional",+        "description": "FT_a GPIO with alternate functions MCO, I2C3_SCL, I2C2_SDA, I2S2_MCK, TIM1_CH1, USART1_CK, COMP7_OUT, TIM4_ETR, FDCAN3_RX, SAI1_CK2, HRTIM1_CHA1, SAI1_SCK_A, EVENTOUT, plus additional functions ADC5_IN1 and OPAMP5_VOUT."+      },+      {+        "number": "70",+        "name": "PA9",+        "type": "bidirectional",+        "description": "FT_fda (Fm+, USB Type-C dead-battery, analog) GPIO with alternate functions I2C3_SMBA, I2C2_SCL, I2S3_MCK, TIM1_CH2, USART1_TX, COMP5_OUT, TIM15_BKIN, TIM2_CH3, HRTIM1_CHA2, SAI1_FS_A, EVENTOUT, plus additional functions ADC5_IN2 and UCPD1_DBCC1."+      },+      {+        "number": "71",+        "name": "PA10",+        "type": "bidirectional",+        "description": "FT_fda GPIO with alternate functions TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX, COMP6_OUT, TIM2_CH4, TIM8_BKIN, SAI1_D1, HRTIM1_CHB1, SAI1_SD_A, EVENTOUT, plus additional function UCPD1_DBCC2."+      },+      {+        "number": "72",+        "name": "PA11",+        "type": "bidirectional",+        "description": "FT_u (USB-capable) GPIO with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX, TIM4_CH1, TIM1_CH4, TIM1_BKIN2, HRTIM1_CHB2, EVENTOUT, plus additional function USB_DM."+      },+      {+        "number": "73",+        "name": "PA12",+        "type": "bidirectional",+        "description": "FT_u GPIO with alternate functions TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX, TIM4_CH2, TIM1_ETR, HRTIM1_FLT1, EVENTOUT, plus additional function USB_DP."+      },+      {+        "number": "74",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin."+      },+      {+        "number": "75",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, operating range 1.71 V to 3.6 V."+      },+      {+        "number": "76",+        "name": "PA13",+        "type": "bidirectional",+        "description": "FT_f GPIO configured after reset as SWDIO-JTMS debug function with internal pull-up activated; other alternate functions TIM16_CH1N, I2C4_SCL, I2C1_SCL, IR_OUT, USART3_CTS, TIM4_CH3, SAI1_SD_B, EVENTOUT."+      },+      {+        "number": "77",+        "name": "PA14",+        "type": "bidirectional",+        "description": "FT_f GPIO configured after reset as SWCLK-JTCK debug function with internal pull-down activated; other alternate functions LPTIM1_OUT, I2C4_SMBA, I2C1_SDA, TIM8_CH2, TIM1_BKIN, USART2_TX, SAI1_FS_B, EVENTOUT."+      },+      {+        "number": "78",+        "name": "PA15",+        "type": "bidirectional",+        "description": "FT_f GPIO configured after reset as JTDI debug function with internal pull-up activated; other alternate functions TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, UART4_RTS_DE, TIM1_BKIN, FDCAN3_TX, HRTIM1_FLT2, TIM2_ETR, EVENTOUT."+      },+      {+        "number": "79",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM8_CH1N, UART4_TX, SPI3_SCK/I2S3_CK, USART3_TX, HRTIM1_FLT6, EVENTOUT."+      },+      {+        "number": "80",+        "name": "PC11",+        "type": "bidirectional",+        "description": "FT_f GPIO with alternate functions HRTIM1_EEV2, TIM8_CH2N, UART4_RX, SPI3_MISO, USART3_RX, I2C3_SDA, EVENTOUT."+      },+      {+        "number": "81",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM5_CH2, HRTIM1_EEV1, TIM8_CH3N, UART5_TX, SPI3_MOSI/I2S3_SD, USART3_CK, UCPD1_FRSTX, EVENTOUT."+      },+      {+        "number": "82",+        "name": "PD0",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM8_CH4N, FDCAN1_RX, FMC_D2, EVENTOUT."+      },+      {+        "number": "83",+        "name": "PD1",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM8_CH4, TIM8_BKIN2, FDCAN1_TX, FMC_D3, EVENTOUT."+      },+      {+        "number": "84",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM3_ETR, TIM8_BKIN, UART5_RX, EVENTOUT."+      },+      {+        "number": "85",+        "name": "PD3",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM2_CH1/TIM2_ETR, USART2_CTS, QUADSPI1_BK2_NCS, FMC_CLK, EVENTOUT."+      },+      {+        "number": "86",+        "name": "PD4",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM2_CH2, USART2_RTS_DE, QUADSPI1_BK2_IO0, FMC_NOE, EVENTOUT."+      },+      {+        "number": "87",+        "name": "PD5",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions USART2_TX, QUADSPI1_BK2_IO1, FMC_NWE, EVENTOUT."+      },+      {+        "number": "88",+        "name": "PD6",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM2_CH4, SAI1_D1, USART2_RX, QUADSPI1_BK2_IO2, FMC_NWAIT, SAI1_SD_A, EVENTOUT."+      },+      {+        "number": "89",+        "name": "PD7",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM2_CH3, USART2_CK, QUADSPI1_BK2_IO3, FMC_NCE/FMC_NE1, EVENTOUT."+      },+      {+        "number": "90",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO configured after reset as JTDO-TRACESWO debug function with internal pull-up activated; other alternate functions TIM2_CH2, TIM4_ETR, UCPD1_CRS_SYNC, TIM8_CH1N, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR, FDCAN3_RX, HRTIM1_SCOUT, HRTIM1_EEV9, SAI1_SCK_B, EVENTOUT."+      },+      {+        "number": "91",+        "name": "PB4",+        "type": "bidirectional",+        "description": "FT_c (USB Type-C PD capable) GPIO configured after reset as JTRST debug function with internal pull-up activated; other alternate functions TIM16_CH1, TIM3_CH1, TIM8_CH2N, SPI1_MISO, SPI3_MISO, USART2_RX, UART5_RTS_DE, TIM17_BKIN, FDCAN3_TX, HRTIM1_EEV7, SAI1_MCLK_B, EVENTOUT, plus additional function UCPD1_CC2."+      },+      {+        "number": "92",+        "name": "PB5",+        "type": "bidirectional",+        "description": "FT_f GPIO with alternate functions TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, FDCAN2_RX, TIM17_CH1, LPTIM1_IN1, SAI1_SD_B, HRTIM1_EEV6, UART5_CTS, EVENTOUT."+      },+      {+        "number": "93",+        "name": "PB6",+        "type": "bidirectional",+        "description": "FT_c (USB Type-C PD capable) GPIO with alternate functions TIM16_CH1N, TIM4_CH1, TIM8_CH1, TIM8_ETR, USART1_TX, COMP4_OUT, FDCAN2_TX, TIM8_BKIN2, LPTIM1_ETR, HRTIM1_SCIN, HRTIM1_EEV4, SAI1_FS_B, EVENTOUT, plus additional function UCPD1_CC1."+      },+      {+        "number": "94",+        "name": "PB7",+        "type": "bidirectional",+        "description": "FT_f GPIO with alternate functions TIM17_CH1N, TIM4_CH2, I2C4_SDA, I2C1_SDA, TIM8_BKIN, USART1_RX, COMP3_OUT, TIM3_CH4, LPTIM1_IN2, FMC_NL, HRTIM1_EEV3, UART4_CTS, EVENTOUT, plus additional function PVD_IN."+      },+      {+        "number": "95",+        "name": "PB8-BOOT0",+        "type": "bidirectional",+        "description": "FT_f GPIO/dedicated BOOT0 pin; alternate functions TIM16_CH1, TIM4_CH3, SAI1_CK1, I2C1_SCL, USART3_RX, COMP1_OUT, FDCAN1_RX, TIM8_CH2, TIM1_BKIN, HRTIM1_EEV8, SAI1_MCLK_A, EVENTOUT; datasheet recommends setting PB8 to a non-analog mode after startup if left unconnected, to limit consumption."+      },+      {+        "number": "96",+        "name": "PB9",+        "type": "bidirectional",+        "description": "FT_f GPIO with alternate functions TIM17_CH1, TIM4_CH4, SAI1_D2, I2C1_SDA, IR_OUT, USART3_TX, COMP2_OUT, FDCAN1_TX, TIM8_CH3, TIM1_CH3N, HRTIM1_EEV5, SAI1_FS_A, EVENTOUT."+      },+      {+        "number": "97",+        "name": "PE0",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM4_ETR, TIM20_CH4N, TIM16_CH1, TIM20_ETR, USART1_TX, FMC_NBL0, EVENTOUT."+      },+      {+        "number": "98",+        "name": "PE1",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) GPIO with alternate functions TIM17_CH1, TIM20_CH4, USART1_RX, FMC_NBL1, EVENTOUT."+      },+      {+        "number": "99",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin."+      },+      {+        "number": "100",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, operating range 1.71 V to 3.6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins labeled with '-OSC_IN' and '-OSC_OUT' have both standard GPIO and oscillator functions; exact b; Pins with USB Type-C PD capability (PA9, PA10) marked with '_fd' and '_c' require special configurat; Pins PC13-PC15 are connected through power switch with limited current sinking (3 mA max); speed sho"+        ],+        "pages_sent": 85,+        "cost_usd": 0.3064,+        "at": "2026-09-24T00:40:42"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884401510236160",+        "pages": 236,+        "sha256": "d493fe0ab22e61ff",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 100,+        "described": 100,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file