component
STM32G473VCT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+136@@ -0,0 +1,136 @@+# STM32G473VCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32G473VCT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PF9 | bidirectional | General-purpose I/O port F pin 9, 3.3 V I/O |+| 2 | PF0-OSC_IN | bidirectional | Main crystal oscillator input (4-48 MHz) or GPIO |+| 3 | PF1-OSC_OUT | bidirectional | Main crystal oscillator output connection or GPIO |+| 4 | PG10-NRST | bidirectional | Active-low system reset input with integrated weak pull-up resistor (~40 kΩ) |+| 5 | PC0 | bidirectional | GPIO port C pin 0 with analog multiplexer switch |+| 6 | PC1 | bidirectional | GPIO port C pin 1 with analog multiplexer switch |+| 7 | PC2 | bidirectional | GPIO port C pin 2 with analog multiplexer switch |+| 8 | PC3 | bidirectional | GPIO port C pin 3 with analog multiplexer switch |+| 9 | PF2 | bidirectional | General-purpose I/O port F pin 2 |+| 10 | PA0 | bidirectional | GPIO port A pin 0 with analog multiplexer switch |+| 11 | PA1 | bidirectional | GPIO port A pin 1 with analog multiplexer switch |+| 12 | PA2 | bidirectional | GPIO port A pin 2 with analog multiplexer switch |+| 13 | VSS | power_in | Ground reference for digital circuitry |+| 14 | VDD | power_in | Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor |+| 15 | PA3 | bidirectional | GPIO port A pin 3 with analog multiplexer switch |+| 16 | PC15-OSC32_OUT | bidirectional | 32 kHz oscillator output pin for crystal connection or GPIO |+| 17 | PF10 | bidirectional | General-purpose I/O port F pin 10 |+| 18 | PE5 | bidirectional | General-purpose I/O port E pin 5 |+| 19 | VBAT | power_in | Backup battery supply voltage 1.55-3.6 V for RTC and backup registers |+| 20 | PC14-OSC32_IN | bidirectional | 32 kHz oscillator input (32.768 kHz crystal) or GPIO |+| 21 | PE2 | bidirectional | GPIO port E pin 2, trace clock output (TRACECK) when ETM enabled |+| 22 | PE3 | bidirectional | GPIO port E pin 3, trace data output (TRACED0) when ETM enabled |+| 23 | PE4 | bidirectional | GPIO port E pin 4, trace data output (TRACED1) when ETM enabled |+| 24 | PE6 | bidirectional | GPIO port E pin 6, trace data output (TRACED3) when ETM enabled |+| 25 | PC13 | bidirectional | GPIO port C pin 13 (supply-limited: 3 mA max output, 2 MHz max speed, 30 pF max load) |+| 26 | PA4 | bidirectional | GPIO port A pin 4 with analog multiplexer switch |+| 27 | PA5 | bidirectional | GPIO port A pin 5 with analog multiplexer switch |+| 28 | PC4 | bidirectional | GPIO port C pin 4 with analog multiplexer switch |+| 29 | PB1 | bidirectional | GPIO port B pin 1 with analog multiplexer switch |+| 30 | VDDA | power_in | Analog supply voltage 1.62-3.6 V (ADC/DAC/OPAMP/COMP); requires 10 nF and 1 µF decoupling capacitors |+| 31 | PA6 | bidirectional | GPIO port A pin 6 with analog multiplexer switch |+| 32 | PA7 | bidirectional | GPIO port A pin 7 with analog multiplexer switch |+| 33 | PB2 | bidirectional | GPIO port B pin 2 with analog multiplexer switch |+| 34 | PE8 | bidirectional | GPIO port E pin 8 with analog multiplexer switch |+| 35 | PE11 | bidirectional | GPIO port E pin 11 with analog multiplexer switch |+| 36 | PC5 | bidirectional | GPIO port C pin 5 with analog multiplexer switch |+| 37 | PB0 | bidirectional | GPIO port B pin 0 with analog multiplexer switch |+| 38 | PE9 | bidirectional | GPIO port E pin 9 with analog multiplexer switch |+| 39 | VSSA | power_in | Analog ground reference |+| 40 | PE12 | bidirectional | GPIO port E pin 12 with analog multiplexer switch |+| 41 | PE15 | bidirectional | GPIO port E pin 15 with analog multiplexer switch |+| 42 | VREF+ | power_in | Positive reference voltage for ADCs and DACs; requires 100 nF and 1 µF decoupling capacitors |+| 43 | PE13 | bidirectional | GPIO port E pin 13 with analog multiplexer switch |+| 44 | PB10 | bidirectional | GPIO port B pin 10 with analog multiplexer switch |+| 45 | PE7 | bidirectional | GPIO port E pin 7 with analog multiplexer switch |+| 46 | PE10 | bidirectional | GPIO port E pin 10 with analog multiplexer switch |+| 47 | PE14 | bidirectional | GPIO port E pin 14 with analog multiplexer switch |+| 48 | VSS | power_in | Ground reference for digital circuitry |+| 49 | VDD | power_in | Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor |+| 50 | PB11 | bidirectional | GPIO port B pin 11 with analog multiplexer switch |+| 51 | PC7 | bidirectional | GPIO port C pin 7, I2S master clock capable |+| 52 | VDD | power_in | Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor |+| 53 | VSS | power_in | Ground reference for digital circuitry |+| 54 | PD15 | bidirectional | GPIO port D pin 15 with analog multiplexer switch |+| 55 | PD14 | bidirectional | GPIO port D pin 14 with analog multiplexer switch |+| 56 | PD13 | bidirectional | GPIO port D pin 13 with analog multiplexer switch |+| 57 | PD12 | bidirectional | GPIO port D pin 12 with analog multiplexer switch |+| 58 | PD11 | bidirectional | GPIO port D pin 11 with analog multiplexer switch |+| 59 | PD10 | bidirectional | GPIO port D pin 10 with analog multiplexer switch |+| 60 | PD9 | bidirectional | GPIO port D pin 9 with analog multiplexer switch |+| 61 | PD8 | bidirectional | GPIO port D pin 8 with analog multiplexer switch |+| 62 | PB15 | bidirectional | GPIO port B pin 15 with analog multiplexer switch |+| 63 | PB14 | bidirectional | GPIO port B pin 14 with analog multiplexer switch |+| 64 | PB13 | bidirectional | GPIO port B pin 13 with analog multiplexer switch |+| 65 | PB12 | bidirectional | GPIO port B pin 12 with analog multiplexer switch |+| 66 | PC8 | bidirectional | GPIO port C pin 8, I2S master clock capable |+| 67 | PC6 | bidirectional | GPIO port C pin 6, I2S master clock capable |+| 68 | PA11 | bidirectional | GPIO port A pin 11; USB FS DP line when USB configured |+| 69 | PA9 | bidirectional | GPIO port A pin 9; USB Type-C PD dead battery mode capable |+| 70 | PC9 | bidirectional | GPIO port C pin 9, I2S master clock capable |+| 71 | VDD | power_in | Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor |+| 72 | VSS | power_in | Ground reference for digital circuitry |+| 73 | PA12 | bidirectional | GPIO port A pin 12; USB FS DM line when USB configured |+| 74 | PA10 | bidirectional | GPIO port A pin 10; USB Type-C PD dead battery mode capable |+| 75 | PA8 | bidirectional | GPIO port A pin 8 with analog multiplexer switch; MCO master clock output |+| 76 | VDD | power_in | Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor |+| 77 | VSS | power_in | Ground reference for digital circuitry |+| 78 | PE1 | bidirectional | GPIO port E pin 1 |+| 79 | PE0 | bidirectional | GPIO port E pin 0 |+| 80 | PB9 | bidirectional | GPIO port B pin 9; infrared output capable |+| 81 | PB8-BOOT0 | bidirectional | GPIO port B pin 8 / BOOT0 pin; set to alternate function after startup to limit consumption |+| 82 | PB7 | bidirectional | GPIO port B pin 7; PVD power supply monitor input |+| 83 | PB6 | bidirectional | GPIO port B pin 6; USB Type-C PD CC1 capable |+| 84 | PB5 | bidirectional | GPIO port B pin 5 |+| 85 | PB4 | bidirectional | GPIO port B pin 4; USB Type-C PD CC2 capable |+| 86 | PB3 | bidirectional | GPIO port B pin 3; JTAG TDO or trace SWO output when debug enabled |+| 87 | PD7 | bidirectional | GPIO port D pin 7 |+| 88 | PD6 | bidirectional | GPIO port D pin 6 |+| 89 | PD5 | bidirectional | GPIO port D pin 5 |+| 90 | PD4 | bidirectional | GPIO port D pin 4 |+| 91 | PD3 | bidirectional | GPIO port D pin 3 |+| 92 | PD2 | bidirectional | GPIO port D pin 2 |+| 93 | PD1 | bidirectional | GPIO port D pin 1 |+| 94 | PD0 | bidirectional | GPIO port D pin 0 |+| 95 | PC12 | bidirectional | GPIO port C pin 12 |+| 96 | PC11 | bidirectional | GPIO port C pin 11 |+| 97 | PC10 | bidirectional | GPIO port C pin 10 |+| 98 | PA15 | bidirectional | GPIO port A pin 15; JTAG TDI input when debug enabled; internal pull-up after reset |+| 99 | PA14 | bidirectional | GPIO port A pin 14 (SWCLK/JTAG TCK); internal pull-down activated after reset |+| 100 | PA13 | bidirectional | GPIO port A pin 13 (SWDIO/JTAG TMS); internal pull-up activated after reset |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32G473VCT6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32g473vct6-etched.step` / `stm32g473vct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g473vct6.step` / `stm32g473vct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907782859075584) (223 pp, sha256 `63caa155ed7b741d`, retrieved 2026-09-29, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g473vct6-datasheet.pdf)
page.jsonadded+694@@ -0,0 +1,694 @@+{+ "slug": "stm32g473vct6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32g473vct6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32g473vct6.kicad_sym",+ "stm32g473vct6.kicad_mod",+ "stm32g473vct6.glb",+ "stm32g473vct6.step",+ "stm32g473vct6.lbr",+ "docs/hero.png",+ "docs/stm32g473vct6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32G473VCT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-100(14x14)",+ "pin_count": 100,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907782859075584",+ "parts": {+ "symbol": "stm32g473vct6.kicad_sym",+ "footprint": "stm32g473vct6.kicad_mod",+ "model_3d": "stm32g473vct6-etched.glb",+ "model_3d_plain": "stm32g473vct6.glb",+ "model_3d_step": "stm32g473vct6-etched.step",+ "model_3d_step_plain": "stm32g473vct6.step",+ "lbr": "stm32g473vct6.lbr"+ },+ "distributor_links": {+ "lcsc": "C730121",+ "digikey": "497-STM32G473VCT6-ND",+ "mouser": "511-STM32G473VCT6"+ },+ "distributor_check": {+ "checked_at": "2026-09-29T14:46:45Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-STM32G473VCT6-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32G473VCT6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PF9",+ "type": "bidirectional",+ "description": "General-purpose I/O port F pin 9, 3.3 V I/O"+ },+ {+ "number": "2",+ "name": "PF0-OSC_IN",+ "type": "bidirectional",+ "description": "Main crystal oscillator input (4-48 MHz) or GPIO"+ },+ {+ "number": "3",+ "name": "PF1-OSC_OUT",+ "type": "bidirectional",+ "description": "Main crystal oscillator output connection or GPIO"+ },+ {+ "number": "4",+ "name": "PG10-NRST",+ "type": "bidirectional",+ "description": "Active-low system reset input with integrated weak pull-up resistor (~40 kΩ)"+ },+ {+ "number": "5",+ "name": "PC0",+ "type": "bidirectional",+ "description": "GPIO port C pin 0 with analog multiplexer switch"+ },+ {+ "number": "6",+ "name": "PC1",+ "type": "bidirectional",+ "description": "GPIO port C pin 1 with analog multiplexer switch"+ },+ {+ "number": "7",+ "name": "PC2",+ "type": "bidirectional",+ "description": "GPIO port C pin 2 with analog multiplexer switch"+ },+ {+ "number": "8",+ "name": "PC3",+ "type": "bidirectional",+ "description": "GPIO port C pin 3 with analog multiplexer switch"+ },+ {+ "number": "9",+ "name": "PF2",+ "type": "bidirectional",+ "description": "General-purpose I/O port F pin 2"+ },+ {+ "number": "10",+ "name": "PA0",+ "type": "bidirectional",+ "description": "GPIO port A pin 0 with analog multiplexer switch"+ },+ {+ "number": "11",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO port A pin 1 with analog multiplexer switch"+ },+ {+ "number": "12",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO port A pin 2 with analog multiplexer switch"+ },+ {+ "number": "13",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for digital circuitry"+ },+ {+ "number": "14",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor"+ },+ {+ "number": "15",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO port A pin 3 with analog multiplexer switch"+ },+ {+ "number": "16",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "32 kHz oscillator output pin for crystal connection or GPIO"+ },+ {+ "number": "17",+ "name": "PF10",+ "type": "bidirectional",+ "description": "General-purpose I/O port F pin 10"+ },+ {+ "number": "18",+ "name": "PE5",+ "type": "bidirectional",+ "description": "General-purpose I/O port E pin 5"+ },+ {+ "number": "19",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery supply voltage 1.55-3.6 V for RTC and backup registers"+ },+ {+ "number": "20",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "32 kHz oscillator input (32.768 kHz crystal) or GPIO"+ },+ {+ "number": "21",+ "name": "PE2",+ "type": "bidirectional",+ "description": "GPIO port E pin 2, trace clock output (TRACECK) when ETM enabled"+ },+ {+ "number": "22",+ "name": "PE3",+ "type": "bidirectional",+ "description": "GPIO port E pin 3, trace data output (TRACED0) when ETM enabled"+ },+ {+ "number": "23",+ "name": "PE4",+ "type": "bidirectional",+ "description": "GPIO port E pin 4, trace data output (TRACED1) when ETM enabled"+ },+ {+ "number": "24",+ "name": "PE6",+ "type": "bidirectional",+ "description": "GPIO port E pin 6, trace data output (TRACED3) when ETM enabled"+ },+ {+ "number": "25",+ "name": "PC13",+ "type": "bidirectional",+ "description": "GPIO port C pin 13 (supply-limited: 3 mA max output, 2 MHz max speed, 30 pF max load)"+ },+ {+ "number": "26",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO port A pin 4 with analog multiplexer switch"+ },+ {+ "number": "27",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO port A pin 5 with analog multiplexer switch"+ },+ {+ "number": "28",+ "name": "PC4",+ "type": "bidirectional",+ "description": "GPIO port C pin 4 with analog multiplexer switch"+ },+ {+ "number": "29",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO port B pin 1 with analog multiplexer switch"+ },+ {+ "number": "30",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply voltage 1.62-3.6 V (ADC/DAC/OPAMP/COMP); requires 10 nF and 1 µF decoupling capacitors"+ },+ {+ "number": "31",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO port A pin 6 with analog multiplexer switch"+ },+ {+ "number": "32",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO port A pin 7 with analog multiplexer switch"+ },+ {+ "number": "33",+ "name": "PB2",+ "type": "bidirectional",+ "description": "GPIO port B pin 2 with analog multiplexer switch"+ },+ {+ "number": "34",+ "name": "PE8",+ "type": "bidirectional",+ "description": "GPIO port E pin 8 with analog multiplexer switch"+ },+ {+ "number": "35",+ "name": "PE11",+ "type": "bidirectional",+ "description": "GPIO port E pin 11 with analog multiplexer switch"+ },+ {+ "number": "36",+ "name": "PC5",+ "type": "bidirectional",+ "description": "GPIO port C pin 5 with analog multiplexer switch"+ },+ {+ "number": "37",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO port B pin 0 with analog multiplexer switch"+ },+ {+ "number": "38",+ "name": "PE9",+ "type": "bidirectional",+ "description": "GPIO port E pin 9 with analog multiplexer switch"+ },+ {+ "number": "39",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference"+ },+ {+ "number": "40",+ "name": "PE12",+ "type": "bidirectional",+ "description": "GPIO port E pin 12 with analog multiplexer switch"+ },+ {+ "number": "41",+ "name": "PE15",+ "type": "bidirectional",+ "description": "GPIO port E pin 15 with analog multiplexer switch"+ },+ {+ "number": "42",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive reference voltage for ADCs and DACs; requires 100 nF and 1 µF decoupling capacitors"+ },+ {+ "number": "43",+ "name": "PE13",+ "type": "bidirectional",+ "description": "GPIO port E pin 13 with analog multiplexer switch"+ },+ {+ "number": "44",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO port B pin 10 with analog multiplexer switch"+ },+ {+ "number": "45",+ "name": "PE7",+ "type": "bidirectional",+ "description": "GPIO port E pin 7 with analog multiplexer switch"+ },+ {+ "number": "46",+ "name": "PE10",+ "type": "bidirectional",+ "description": "GPIO port E pin 10 with analog multiplexer switch"+ },+ {+ "number": "47",+ "name": "PE14",+ "type": "bidirectional",+ "description": "GPIO port E pin 14 with analog multiplexer switch"+ },+ {+ "number": "48",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for digital circuitry"+ },+ {+ "number": "49",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor"+ },+ {+ "number": "50",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO port B pin 11 with analog multiplexer switch"+ },+ {+ "number": "51",+ "name": "PC7",+ "type": "bidirectional",+ "description": "GPIO port C pin 7, I2S master clock capable"+ },+ {+ "number": "52",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor"+ },+ {+ "number": "53",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for digital circuitry"+ },+ {+ "number": "54",+ "name": "PD15",+ "type": "bidirectional",+ "description": "GPIO port D pin 15 with analog multiplexer switch"+ },+ {+ "number": "55",+ "name": "PD14",+ "type": "bidirectional",+ "description": "GPIO port D pin 14 with analog multiplexer switch"+ },+ {+ "number": "56",+ "name": "PD13",+ "type": "bidirectional",+ "description": "GPIO port D pin 13 with analog multiplexer switch"+ },+ {+ "number": "57",+ "name": "PD12",+ "type": "bidirectional",+ "description": "GPIO port D pin 12 with analog multiplexer switch"+ },+ {+ "number": "58",+ "name": "PD11",+ "type": "bidirectional",+ "description": "GPIO port D pin 11 with analog multiplexer switch"+ },+ {+ "number": "59",+ "name": "PD10",+ "type": "bidirectional",+ "description": "GPIO port D pin 10 with analog multiplexer switch"+ },+ {+ "number": "60",+ "name": "PD9",+ "type": "bidirectional",+ "description": "GPIO port D pin 9 with analog multiplexer switch"+ },+ {+ "number": "61",+ "name": "PD8",+ "type": "bidirectional",+ "description": "GPIO port D pin 8 with analog multiplexer switch"+ },+ {+ "number": "62",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO port B pin 15 with analog multiplexer switch"+ },+ {+ "number": "63",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO port B pin 14 with analog multiplexer switch"+ },+ {+ "number": "64",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO port B pin 13 with analog multiplexer switch"+ },+ {+ "number": "65",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO port B pin 12 with analog multiplexer switch"+ },+ {+ "number": "66",+ "name": "PC8",+ "type": "bidirectional",+ "description": "GPIO port C pin 8, I2S master clock capable"+ },+ {+ "number": "67",+ "name": "PC6",+ "type": "bidirectional",+ "description": "GPIO port C pin 6, I2S master clock capable"+ },+ {+ "number": "68",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO port A pin 11; USB FS DP line when USB configured"+ },+ {+ "number": "69",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO port A pin 9; USB Type-C PD dead battery mode capable"+ },+ {+ "number": "70",+ "name": "PC9",+ "type": "bidirectional",+ "description": "GPIO port C pin 9, I2S master clock capable"+ },+ {+ "number": "71",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor"+ },+ {+ "number": "72",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for digital circuitry"+ },+ {+ "number": "73",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO port A pin 12; USB FS DM line when USB configured"+ },+ {+ "number": "74",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO port A pin 10; USB Type-C PD dead battery mode capable"+ },+ {+ "number": "75",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO port A pin 8 with analog multiplexer switch; MCO master clock output"+ },+ {+ "number": "76",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply voltage 1.71-3.6 V; requires 100 nF decoupling capacitor"+ },+ {+ "number": "77",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for digital circuitry"+ },+ {+ "number": "78",+ "name": "PE1",+ "type": "bidirectional",+ "description": "GPIO port E pin 1"+ },+ {+ "number": "79",+ "name": "PE0",+ "type": "bidirectional",+ "description": "GPIO port E pin 0"+ },+ {+ "number": "80",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO port B pin 9; infrared output capable"+ },+ {+ "number": "81",+ "name": "PB8-BOOT0",+ "type": "bidirectional",+ "description": "GPIO port B pin 8 / BOOT0 pin; set to alternate function after startup to limit consumption"+ },+ {+ "number": "82",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO port B pin 7; PVD power supply monitor input"+ },+ {+ "number": "83",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO port B pin 6; USB Type-C PD CC1 capable"+ },+ {+ "number": "84",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO port B pin 5"+ },+ {+ "number": "85",+ "name": "PB4",+ "type": "bidirectional",+ "description": "GPIO port B pin 4; USB Type-C PD CC2 capable"+ },+ {+ "number": "86",+ "name": "PB3",+ "type": "bidirectional",+ "description": "GPIO port B pin 3; JTAG TDO or trace SWO output when debug enabled"+ },+ {+ "number": "87",+ "name": "PD7",+ "type": "bidirectional",+ "description": "GPIO port D pin 7"+ },+ {+ "number": "88",+ "name": "PD6",+ "type": "bidirectional",+ "description": "GPIO port D pin 6"+ },+ {+ "number": "89",+ "name": "PD5",+ "type": "bidirectional",+ "description": "GPIO port D pin 5"+ },+ {+ "number": "90",+ "name": "PD4",+ "type": "bidirectional",+ "description": "GPIO port D pin 4"+ },+ {+ "number": "91",+ "name": "PD3",+ "type": "bidirectional",+ "description": "GPIO port D pin 3"+ },+ {+ "number": "92",+ "name": "PD2",+ "type": "bidirectional",+ "description": "GPIO port D pin 2"+ },+ {+ "number": "93",+ "name": "PD1",+ "type": "bidirectional",+ "description": "GPIO port D pin 1"+ },+ {+ "number": "94",+ "name": "PD0",+ "type": "bidirectional",+ "description": "GPIO port D pin 0"+ },+ {+ "number": "95",+ "name": "PC12",+ "type": "bidirectional",+ "description": "GPIO port C pin 12"+ },+ {+ "number": "96",+ "name": "PC11",+ "type": "bidirectional",+ "description": "GPIO port C pin 11"+ },+ {+ "number": "97",+ "name": "PC10",+ "type": "bidirectional",+ "description": "GPIO port C pin 10"+ },+ {+ "number": "98",+ "name": "PA15",+ "type": "bidirectional",+ "description": "GPIO port A pin 15; JTAG TDI input when debug enabled; internal pull-up after reset"+ },+ {+ "number": "99",+ "name": "PA14",+ "type": "bidirectional",+ "description": "GPIO port A pin 14 (SWCLK/JTAG TCK); internal pull-down activated after reset"+ },+ {+ "number": "100",+ "name": "PA13",+ "type": "bidirectional",+ "description": "GPIO port A pin 13 (SWDIO/JTAG TMS); internal pull-up activated after reset"+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907782859075584",+ "pages": 223,+ "sha256": "63caa155ed7b741d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 100,+ "described": 100,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}