← Commit history
README.mdadded+136@@ -0,0 +1,136 @@+# STM32G0B1VCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32G0B1VCT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PB9 | bidirectional | 5V-tolerant Fm+ I/O (FT_f), default GPIO PB9 with alternate functions IR_OUT, UCPD2_FRSTX, TIM17_CH1, FDCAN1_TX, USART3_RX, SPI2_NSS/I2S2_WS, I2C1_SDA, EVENTOUT, USART6_RX, TIM4_CH4. |+| 2 | PC10 | bidirectional | 5V-tolerant I/O (FT), default GPIO PC10 with alternate functions USART3_TX, USART4_TX, TIM1_CH3, SPI3_SCK. |+| 3 | PC11 | bidirectional | 5V-tolerant I/O (FT), default GPIO PC11 with alternate functions USART3_RX, USART4_RX, TIM1_CH4, SPI3_MISO. |+| 4 | PE4 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE4 with alternate function TIM3_CH2. |+| 5 | PE5 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE5 with alternate function TIM3_CH3. |+| 6 | PE6 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE6 with alternate function TIM3_CH4 and additional functions TAMP_IN3, WKUP3. |+| 7 | PC12 | bidirectional | 5V-tolerant I/O (FT), default GPIO PC12 with alternate functions LPTIM1_IN1, UCPD1_FRSTX, TIM14_CH1, USART5_TX, SPI3_MOSI. |+| 8 | PC13 | bidirectional | 5V-tolerant I/O (FT) supplied through the power switch (limited to 3 mA sink, max 2 MHz/30 pF in output mode, not usable as a current source), default GPIO PC13 with alternate function TIM1_BKIN and additional functions TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2. |+| 9 | PC14-OSC32_IN | bidirectional | 5V-tolerant I/O (FT) supplied through the power switch (3 mA sink limit), default GPIO/OSC32_IN pin for the 32.768 kHz LSE crystal, alternate function TIM1_BKIN2. |+| 10 | PC15-OSC32_OUT | bidirectional | 5V-tolerant I/O (FT) supplied through the power switch (3 mA sink limit), default GPIO/OSC32_OUT pin for the 32.768 kHz LSE crystal, alternate functions OSC32_EN, OSC_EN, TIM15_BKIN. |+| 11 | VBAT | power_in | Battery backup supply, 1.55 V to 3.6 V, powers RTC, TAMP, the LSE 32.768 kHz oscillator and backup registers through an internal power switch when VDD is absent. |+| 12 | VREF+ | power_in | Analog reference voltage pin for ADC/DAC/comparators, or output of the internal VREFBUF (~2.048 V or ~2.5 V); must equal VDDA when VDDA<2 V and be between 2 V and VDDA when VDDA≥2 V. |+| 13 | VDD/VDDA | power_in | Main external power supply, 1.7 (1.6) V to 3.6 V, for the internal regulator, system/reset/clock logic and analog blocks (ADC, DAC, comparators, VREFBUF) since VDDA equals VDD. |+| 14 | VSS/VSSA | power_in | Common ground reference for the digital (VSS) and analog (VSSA) supplies. |+| 15 | PF0-OSC_IN | bidirectional | 5V-tolerant I/O (FT), default GPIO/OSC_IN pin for the 4-48 MHz HSE crystal oscillator, alternate functions CRS1_SYNC, EVENTOUT, TIM14_CH1. |+| 16 | PF1-OSC_OUT | bidirectional | 5V-tolerant I/O (FT), default GPIO/OSC_OUT pin for the HSE crystal oscillator, alternate functions OSC_EN, EVENTOUT, TIM15_CH1N. |+| 17 | PF2-NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up; default function NRST drives the device into reset when pulled low, and can alternatively be used as GPIO with functions MCO, LPUART2_TX, LPUART2_RTS_DE. |+| 18 | PF3 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF3 with alternate functions LPUART2_RX, USART6_RTS_DE_CK. |+| 19 | PF4 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF4 with alternate function LPUART1_TX. |+| 20 | PF5 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF5 with alternate function LPUART1_RX. |+| 21 | PC0 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PC0 with alternate functions LPTIM1_IN1, LPUART1_RX, LPTIM2_IN1, LPUART2_TX, USART6_TX, I2C3_SCL, COMP3_OUT and additional function COMP3_INM7. |+| 22 | PC1 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PC1 with alternate functions LPTIM1_OUT, LPUART1_TX, TIM15_CH1, LPUART2_RX, USART6_RX, I2C3_SDA and additional function COMP3_INP1. |+| 23 | PC2 | bidirectional | 5V-tolerant I/O (FT), default GPIO PC2 with alternate functions LPTIM1_IN2, SPI2_MISO/I2S2_MCK, TIM15_CH2, FDCAN2_RX, COMP3_OUT. |+| 24 | PC3 | bidirectional | 5V-tolerant I/O (FT), default GPIO PC3 with alternate functions LPTIM1_ETR, SPI2_MOSI/I2S2_SD, LPTIM2_ETR, FDCAN2_TX. |+| 25 | PA0 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PA0 with alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, TIM2_CH1_ETR, USART4_TX, LPTIM1_OUT, UCPD2_FRSTX, COMP1_OUT and additional functions COMP1_INM8, ADC_IN0, TAMP_IN2, WKUP1. |+| 26 | PA1 | bidirectional | 5V-tolerant analog/diode I/O (FT_ea), default GPIO PA1 with alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, USART4_RX, TIM15_CH1N, I2C1_SMBA, EVENTOUT and additional functions COMP1_INP2, ADC_IN1. |+| 27 | PA2 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PA2 with alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, UCPD1_FRSTX, TIM15_CH1, LPUART1_TX, COMP2_OUT and additional functions COMP2_INM8, ADC_IN2, WKUP4, LSCO. |+| 28 | PA3 | bidirectional | 5V-tolerant analog/diode I/O (FT_ea), default GPIO PA3 with alternate functions SPI2_MISO/I2S2_MCK, USART2_RX, TIM2_CH4, UCPD2_FRSTX, TIM15_CH2, LPUART1_RX, EVENTOUT and additional functions COMP2_INP2, ADC_IN3. |+| 29 | PA4 | bidirectional | 3.6V-tolerant analog-switch I/O (TT_a), default GPIO PA4 with alternate functions SPI1_NSS/I2S1_WS, SPI2_MOSI/I2S2_SD, USB_NOE, USART6_TX, TIM14_CH1, LPTIM2_OUT, UCPD2_FRSTX, EVENTOUT, SPI3_NSS and additional functions ADC_IN4, DAC1_OUT1, RTC_OUT2. |+| 30 | PA5 | bidirectional | 3.6V-tolerant analog/diode I/O (TT_ea), default GPIO PA5 with alternate functions SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, USART6_RX, USART3_TX, LPTIM2_ETR, UCPD1_FRSTX, EVENTOUT and additional functions ADC_IN5, DAC1_OUT2. |+| 31 | PA6 | bidirectional | 5V-tolerant analog/diode I/O (FT_ea), default GPIO PA6 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART6_CTS, USART3_CTS, TIM16_CH1, LPUART1_CTS, COMP1_OUT, I2C2_SDA, I2C3_SDA and additional function ADC_IN6. |+| 32 | PA7 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PA7 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, USART6_RTS_DE_CK, TIM14_CH1, TIM17_CH1, UCPD1_FRSTX, COMP2_OUT, I2C2_SCL, I2C3_SCL and additional function ADC_IN7. |+| 33 | PC4 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PC4 with alternate functions USART3_TX, USART1_TX, TIM2_CH1_ETR, FDCAN1_RX and additional functions COMP1_INM7, ADC_IN17. |+| 34 | PC5 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PC5 with alternate functions USART3_RX, USART1_RX, TIM2_CH2, FDCAN1_TX and additional functions COMP1_INP0, ADC_IN18, WKUP5. |+| 35 | PB0 | bidirectional | 5V-tolerant analog/diode I/O (FT_ea), default GPIO PB0 with alternate functions SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, FDCAN2_RX, USART3_RX, LPTIM1_OUT, UCPD1_FRSTX, COMP1_OUT, USART5_TX, LPUART2_CTS and additional functions COMP3_INP0, ADC_IN8. |+| 36 | PB1 | bidirectional | 5V-tolerant analog/diode I/O (FT_ea), default GPIO PB1 with alternate functions TIM14_CH1, TIM3_CH4, TIM1_CH3N, FDCAN2_TX, USART3_RTS_DE_CK, LPTIM2_IN1, LPUART1_RTS_DE, COMP3_OUT, USART5_RX, LPUART2_RTS_DE and additional functions COMP1_INM6, ADC_IN9. |+| 37 | PB2 | bidirectional | 5V-tolerant analog/diode I/O (FT_ea), default GPIO PB2 with alternate functions SPI2_MISO/I2S2_MCK, MCO2, USART3_TX, LPTIM1_OUT, EVENTOUT and additional functions COMP1_INP1, COMP3_INM6, ADC_IN10. |+| 38 | PF6 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF6 with alternate function LPUART1_RTS_DE. |+| 39 | PF7 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF7 with alternate functions LPUART1_CTS, USART5_CTS. |+| 40 | PE7 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PE7 with alternate functions TIM1_ETR, USART5_RTS_DE_CK and additional function COMP3_INP2. |+| 41 | PE8 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PE8 with alternate functions USART4_TX, TIM1_CH1N and additional function COMP3_INM8. |+| 42 | PE9 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE9 with alternate functions USART4_RX, TIM1_CH1. |+| 43 | PE10 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE10 with alternate functions TIM1_CH2N, USART5_TX. |+| 44 | PE11 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE11 with alternate functions TIM1_CH2, USART5_RX. |+| 45 | PE12 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE12 with alternate functions SPI1_NSS/I2S1_WS, TIM1_CH3N. |+| 46 | PE13 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE13 with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH3. |+| 47 | PE14 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE14 with alternate functions SPI1_MISO/I2S1_MCK, TIM1_CH4, TIM1_BKIN2. |+| 48 | PE15 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE15 with alternate functions SPI1_MOSI/I2S1_SD, TIM1_BKIN. |+| 49 | PB10 | bidirectional | 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB10 with alternate functions CEC, LPUART1_RX, TIM2_CH3, USART3_TX, SPI2_SCK/I2S2_CK, I2C2_SCL, COMP1_OUT and additional function ADC_IN11. |+| 50 | PB11 | bidirectional | 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB11 with alternate functions SPI2_MOSI/I2S2_SD, LPUART1_TX, TIM2_CH4, USART3_RX, I2C2_SDA, COMP2_OUT and additional function ADC_IN15. |+| 51 | PB12 | bidirectional | 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB12 with alternate functions SPI2_NSS/I2S2_WS, LPUART1_RTS_DE, TIM1_BKIN, FDCAN2_RX, TIM15_BKIN, UCPD2_FRSTX, EVENTOUT, I2C2_SMBA and additional function ADC_IN16. |+| 52 | PB13 | bidirectional | 5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs), default GPIO PB13 with alternate functions SPI2_SCK/I2S2_CK, LPUART1_CTS, TIM1_CH1N, FDCAN2_TX, USART3_CTS, TIM15_CH1N, I2C2_SCL, EVENTOUT. |+| 53 | PB14 | bidirectional | 5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs), default GPIO PB14 with alternate functions SPI2_MISO/I2S2_MCK, UCPD1_FRSTX, TIM1_CH2N, USART3_RTS_DE_CK, TIM15_CH1, I2C2_SDA, EVENTOUT, USART6_RTS_DE_CK. |+| 54 | PB15 | bidirectional | 5V-tolerant Fm+ USB Type-C PD capable I/O supplied from VDDIO2 (FT_fcs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA10 level; default GPIO PB15 with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, EVENTOUT, USART6_CTS and additional functions UCPD1_CC2, RTC_REFIN. |+| 55 | PA8 | bidirectional | 5V-tolerant Fm+ USB Type-C PD capable I/O supplied from VDDIO2 (FT_fcs); may have a reset-time pull-down (disable via UCPDx_STROBE); default GPIO PA8 with alternate functions MCO, SPI2_NSS/I2S2_WS, TIM1_CH1, CRS1_SYNC, LPTIM2_OUT, EVENTOUT, I2C2_SMBA and additional function UCPD1_CC1. |+| 56 | PA9 | bidirectional | 5V-tolerant Fm+ USB-PD dead-battery I/O supplied from VDDIO2 (FT_fds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA9 level; default GPIO PA9 with alternate functions MCO, USART1_TX, TIM1_CH2, SPI2_MISO/I2S2_MCK, TIM15_BKIN, I2C1_SCL, EVENTOUT, I2C2_SCL and additional function UCPD1_DBCC1. |+| 57 | PC6 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC6 with alternate functions UCPD1_FRSTX, TIM3_CH1, TIM2_CH3, LPUART2_TX. |+| 58 | PC7 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC7 with alternate functions UCPD2_FRSTX, TIM3_CH2, TIM2_CH4, LPUART2_RX. |+| 59 | PD8 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD8 with alternate functions USART3_TX, SPI1_SCK/I2S1_CK, LPTIM1_OUT. |+| 60 | PD9 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD9 with alternate functions USART3_RX, SPI1_NSS/I2S1_WS, TIM1_BKIN2. |+| 61 | PD10 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD10 with alternate function MCO. |+| 62 | PD11 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD11 with alternate functions USART3_CTS, LPTIM2_ETR. |+| 63 | VSS | power_in | Digital ground supply pin. |+| 64 | VDDIO2 | power_in | Independent I/O supply, 1.6 V to 3.6 V, powers selected I/Os and VDDUSB; must not be applied without valid VDD present. |+| 65 | PD12 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD12 with alternate functions USART3_RTS_DE_CK, LPTIM2_IN1, TIM4_CH1, FDCAN1_RX. |+| 66 | PD13 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD13 with alternate functions LPTIM2_OUT, TIM4_CH2, FDCAN1_TX. |+| 67 | PD14 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD14 with alternate functions LPUART2_CTS, TIM4_CH3, FDCAN2_RX. |+| 68 | PD15 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD15 with alternate functions CRS1_SYNC, LPUART2_RTS_DE, TIM4_CH4, FDCAN2_TX. |+| 69 | PA10 | bidirectional | 5V-tolerant Fm+ USB-PD dead-battery I/O supplied from VDDIO2 (FT_fds); may have a reset-time pull-down (disable via UCPDx_STROBE); default GPIO PA10 with alternate functions SPI2_MOSI/I2S2_SD, USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT, I2C2_SDA and additional function UCPD1_DBCC2. |+| 70 | PA11 [PA9] | bidirectional | 5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs); can be remapped to act as PA9 in place of pin 56 via SYSCFG_CFGR1; default GPIO PA11 with alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, FDCAN1_RX, TIM1_BKIN2, I2C2_SCL, COMP1_OUT and additional function USB_DM. |+| 71 | PA12 [PA10] | bidirectional | 5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs); can be remapped to act as PA10 in place of pin 69 via SYSCFG_CFGR1; default GPIO PA12 with alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, FDCAN1_TX, I2S_CKIN, I2C2_SDA, COMP2_OUT and additional function USB_DP. |+| 72 | PF8 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PF8 with no listed alternate or additional functions. |+| 73 | PA13 | bidirectional | 5V-tolerant switchable-diode I/O supplied from VDDIO2 (FT_es); configured at reset as SWDIO debug function with internal pull-up active; alternate functions SWDIO, IR_OUT, USB_NOE, EVENTOUT, LPUART2_RX. |+| 74 | PA14-BOOT0 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s); configured at reset as SWCLK debug function with internal pull-down active; alternate functions SWCLK, USART2_TX, EVENTOUT, LPUART2_TX; additional function BOOT0 selects boot source at startup. |+| 75 | PA15 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PA15 with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, MCO2, USART4_RTS_DE_CK, USART3_RTS_DE_CK, USB_NOE, EVENTOUT, I2C2_SMBA, SPI3_NSS. |+| 76 | PC8 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC8 with alternate functions UCPD2_FRSTX, TIM3_CH3, TIM1_CH1, LPUART2_CTS. |+| 77 | PC9 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC9 with alternate functions I2S_CKIN, TIM3_CH4, TIM1_CH2, LPUART2_RTS_DE, USB_NOE. |+| 78 | PD0 | bidirectional | 5V-tolerant USB Type-C PD capable I/O supplied from VDDIO2 (FT_cs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA10 level; default GPIO PD0 with alternate functions EVENTOUT, SPI2_NSS/I2S2_WS, TIM16_CH1, FDCAN1_RX and additional function UCPD2_CC1. |+| 79 | PD1 | bidirectional | 5V-tolerant USB-PD dead-battery I/O supplied from VDDIO2 (FT_ds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD1 level; default GPIO PD1 with alternate functions EVENTOUT, SPI2_SCK/I2S2_CK, TIM17_CH1, FDCAN1_TX and additional function UCPD2_DBCC1. |+| 80 | PD2 | bidirectional | 5V-tolerant USB Type-C PD capable I/O supplied from VDDIO2 (FT_cs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD1 level; default GPIO PD2 with alternate functions USART3_RTS_DE_CK, TIM3_ETR, TIM1_CH1N, USART5_RX and additional function UCPD2_CC2. |+| 81 | PD3 | bidirectional | 5V-tolerant USB-PD dead-battery I/O supplied from VDDIO2 (FT_ds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD3 level; default GPIO PD3 with alternate functions USART2_CTS, SPI2_MISO/I2S2_MCK, TIM1_CH2N, USART5_TX and additional function UCPD2_DBCC2. |+| 82 | PD4 | bidirectional | 5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD4 with alternate functions USART2_RTS_DE_CK, SPI2_MOSI/I2S2_SD, TIM1_CH3N, USART5_RTS_DE_CK. |+| 83 | PD5 | bidirectional | 5V-tolerant I/O (FT), default GPIO PD5 with alternate functions USART2_TX, SPI1_MISO/I2S1_MCK, TIM1_BKIN, USART5_CTS. |+| 84 | PD6 | bidirectional | 5V-tolerant I/O (FT), default GPIO PD6 with alternate functions USART2_RX, SPI1_MOSI/I2S1_SD, LPTIM2_OUT. |+| 85 | PD7 | bidirectional | 5V-tolerant I/O (FT), default GPIO PD7 with alternate function MCO2. |+| 86 | PF9 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF9 with alternate function USART6_TX. |+| 87 | PF10 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF10 with alternate function USART6_RX. |+| 88 | PF11 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF11 with alternate function USART6_RTS_DE_CK. |+| 89 | PF12 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF12 with alternate functions TIM15_CH1, USART6_CTS. |+| 90 | PF13 | bidirectional | 5V-tolerant I/O (FT), default GPIO PF13 with alternate function TIM15_CH2. |+| 91 | PB3 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PB3 with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART5_TX, USART1_RTS_DE_CK, I2C3_SCL, EVENTOUT, I2C2_SCL, SPI3_SCK and additional function COMP2_INM6. |+| 92 | PB4 | bidirectional | 5V-tolerant analog-switch I/O (FT_a), default GPIO PB4 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART5_RX, USART1_CTS, TIM17_BKIN, I2C3_SDA, EVENTOUT, I2C2_SDA, SPI3_MISO and additional function COMP2_INP0. |+| 93 | PB5 | bidirectional | 5V-tolerant I/O (FT), default GPIO PB5 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN2_RX, LPTIM1_IN1, I2C1_SMBA, COMP2_OUT, USART5_RTS_DE_CK, SPI3_MOSI and additional function WKUP6. |+| 94 | PE0 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE0 with alternate functions TIM16_CH1, EVENTOUT, TIM4_ETR. |+| 95 | PE1 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE1 with alternate functions TIM17_CH1, EVENTOUT. |+| 96 | PE2 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE2 with alternate function TIM3_ETR. |+| 97 | PE3 | bidirectional | 5V-tolerant I/O (FT), default GPIO PE3 with alternate function TIM3_CH1. |+| 98 | PB6 | bidirectional | 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB6 with alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, FDCAN2_TX, SPI2_MISO/I2S2_MCK, LPTIM1_ETR, I2C1_SCL, EVENTOUT, USART5_CTS, TIM4_CH1, LPUART2_TX and additional function COMP2_INP1. |+| 99 | PB7 | bidirectional | 5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB7 with alternate functions USART1_RX, SPI2_MOSI/I2S2_SD, TIM17_CH1N, USART4_CTS, LPTIM1_IN2, I2C1_SDA, EVENTOUT, TIM4_CH2, LPUART2_RX and additional functions COMP2_INM7, PVD_IN. |+| 100 | PB8 | bidirectional | 5V-tolerant Fm+ I/O (FT_f), default GPIO PB8 with alternate functions CEC, SPI2_SCK/I2S2_CK, TIM16_CH1, FDCAN1_RX, USART3_TX, TIM15_BKIN, I2C1_SCL, EVENTOUT, USART6_TX, TIM4_CH3. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32G0B1VCT6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32g0b1vct6-etched.step` / `stm32g0b1vct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g0b1vct6.step` / `stm32g0b1vct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603393162840711168) (159 pp, sha256 `19ad77934ee0849d`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g0b1vct6-datasheet.pdf)
page.jsonadded+696@@ -0,0 +1,696 @@+{+ "slug": "stm32g0b1vct6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32g0b1vct6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32g0b1vct6.kicad_sym",+ "stm32g0b1vct6.kicad_mod",+ "stm32g0b1vct6.glb",+ "stm32g0b1vct6.step",+ "stm32g0b1vct6.lbr",+ "docs/hero.png",+ "docs/stm32g0b1vct6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32G0B1VCT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-100(14x14)",+ "pin_count": 100,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603393162840711168",+ "parts": {+ "symbol": "stm32g0b1vct6.kicad_sym",+ "footprint": "stm32g0b1vct6.kicad_mod",+ "model_3d": "stm32g0b1vct6-etched.glb",+ "model_3d_plain": "stm32g0b1vct6.glb",+ "model_3d_step": "stm32g0b1vct6-etched.step",+ "model_3d_step_plain": "stm32g0b1vct6.step",+ "lbr": "stm32g0b1vct6.lbr"+ },+ "distributor_links": {+ "lcsc": "C3446137"+ },+ "pins": [+ {+ "number": "1",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f), default GPIO PB9 with alternate functions IR_OUT, UCPD2_FRSTX, TIM17_CH1, FDCAN1_TX, USART3_RX, SPI2_NSS/I2S2_WS, I2C1_SDA, EVENTOUT, USART6_RX, TIM4_CH4."+ },+ {+ "number": "2",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PC10 with alternate functions USART3_TX, USART4_TX, TIM1_CH3, SPI3_SCK."+ },+ {+ "number": "3",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PC11 with alternate functions USART3_RX, USART4_RX, TIM1_CH4, SPI3_MISO."+ },+ {+ "number": "4",+ "name": "PE4",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE4 with alternate function TIM3_CH2."+ },+ {+ "number": "5",+ "name": "PE5",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE5 with alternate function TIM3_CH3."+ },+ {+ "number": "6",+ "name": "PE6",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE6 with alternate function TIM3_CH4 and additional functions TAMP_IN3, WKUP3."+ },+ {+ "number": "7",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PC12 with alternate functions LPTIM1_IN1, UCPD1_FRSTX, TIM14_CH1, USART5_TX, SPI3_MOSI."+ },+ {+ "number": "8",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT) supplied through the power switch (limited to 3 mA sink, max 2 MHz/30 pF in output mode, not usable as a current source), default GPIO PC13 with alternate function TIM1_BKIN and additional functions TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2."+ },+ {+ "number": "9",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT) supplied through the power switch (3 mA sink limit), default GPIO/OSC32_IN pin for the 32.768 kHz LSE crystal, alternate function TIM1_BKIN2."+ },+ {+ "number": "10",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT) supplied through the power switch (3 mA sink limit), default GPIO/OSC32_OUT pin for the 32.768 kHz LSE crystal, alternate functions OSC32_EN, OSC_EN, TIM15_BKIN."+ },+ {+ "number": "11",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery backup supply, 1.55 V to 3.6 V, powers RTC, TAMP, the LSE 32.768 kHz oscillator and backup registers through an internal power switch when VDD is absent."+ },+ {+ "number": "12",+ "name": "VREF+",+ "type": "power_in",+ "description": "Analog reference voltage pin for ADC/DAC/comparators, or output of the internal VREFBUF (~2.048 V or ~2.5 V); must equal VDDA when VDDA<2 V and be between 2 V and VDDA when VDDA≥2 V."+ },+ {+ "number": "13",+ "name": "VDD/VDDA",+ "type": "power_in",+ "description": "Main external power supply, 1.7 (1.6) V to 3.6 V, for the internal regulator, system/reset/clock logic and analog blocks (ADC, DAC, comparators, VREFBUF) since VDDA equals VDD."+ },+ {+ "number": "14",+ "name": "VSS/VSSA",+ "type": "power_in",+ "description": "Common ground reference for the digital (VSS) and analog (VSSA) supplies."+ },+ {+ "number": "15",+ "name": "PF0-OSC_IN",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO/OSC_IN pin for the 4-48 MHz HSE crystal oscillator, alternate functions CRS1_SYNC, EVENTOUT, TIM14_CH1."+ },+ {+ "number": "16",+ "name": "PF1-OSC_OUT",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO/OSC_OUT pin for the HSE crystal oscillator, alternate functions OSC_EN, EVENTOUT, TIM15_CH1N."+ },+ {+ "number": "17",+ "name": "PF2-NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up; default function NRST drives the device into reset when pulled low, and can alternatively be used as GPIO with functions MCO, LPUART2_TX, LPUART2_RTS_DE."+ },+ {+ "number": "18",+ "name": "PF3",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF3 with alternate functions LPUART2_RX, USART6_RTS_DE_CK."+ },+ {+ "number": "19",+ "name": "PF4",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF4 with alternate function LPUART1_TX."+ },+ {+ "number": "20",+ "name": "PF5",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF5 with alternate function LPUART1_RX."+ },+ {+ "number": "21",+ "name": "PC0",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PC0 with alternate functions LPTIM1_IN1, LPUART1_RX, LPTIM2_IN1, LPUART2_TX, USART6_TX, I2C3_SCL, COMP3_OUT and additional function COMP3_INM7."+ },+ {+ "number": "22",+ "name": "PC1",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PC1 with alternate functions LPTIM1_OUT, LPUART1_TX, TIM15_CH1, LPUART2_RX, USART6_RX, I2C3_SDA and additional function COMP3_INP1."+ },+ {+ "number": "23",+ "name": "PC2",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PC2 with alternate functions LPTIM1_IN2, SPI2_MISO/I2S2_MCK, TIM15_CH2, FDCAN2_RX, COMP3_OUT."+ },+ {+ "number": "24",+ "name": "PC3",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PC3 with alternate functions LPTIM1_ETR, SPI2_MOSI/I2S2_SD, LPTIM2_ETR, FDCAN2_TX."+ },+ {+ "number": "25",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PA0 with alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, TIM2_CH1_ETR, USART4_TX, LPTIM1_OUT, UCPD2_FRSTX, COMP1_OUT and additional functions COMP1_INM8, ADC_IN0, TAMP_IN2, WKUP1."+ },+ {+ "number": "26",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5V-tolerant analog/diode I/O (FT_ea), default GPIO PA1 with alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, USART4_RX, TIM15_CH1N, I2C1_SMBA, EVENTOUT and additional functions COMP1_INP2, ADC_IN1."+ },+ {+ "number": "27",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PA2 with alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, UCPD1_FRSTX, TIM15_CH1, LPUART1_TX, COMP2_OUT and additional functions COMP2_INM8, ADC_IN2, WKUP4, LSCO."+ },+ {+ "number": "28",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5V-tolerant analog/diode I/O (FT_ea), default GPIO PA3 with alternate functions SPI2_MISO/I2S2_MCK, USART2_RX, TIM2_CH4, UCPD2_FRSTX, TIM15_CH2, LPUART1_RX, EVENTOUT and additional functions COMP2_INP2, ADC_IN3."+ },+ {+ "number": "29",+ "name": "PA4",+ "type": "bidirectional",+ "description": "3.6V-tolerant analog-switch I/O (TT_a), default GPIO PA4 with alternate functions SPI1_NSS/I2S1_WS, SPI2_MOSI/I2S2_SD, USB_NOE, USART6_TX, TIM14_CH1, LPTIM2_OUT, UCPD2_FRSTX, EVENTOUT, SPI3_NSS and additional functions ADC_IN4, DAC1_OUT1, RTC_OUT2."+ },+ {+ "number": "30",+ "name": "PA5",+ "type": "bidirectional",+ "description": "3.6V-tolerant analog/diode I/O (TT_ea), default GPIO PA5 with alternate functions SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, USART6_RX, USART3_TX, LPTIM2_ETR, UCPD1_FRSTX, EVENTOUT and additional functions ADC_IN5, DAC1_OUT2."+ },+ {+ "number": "31",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5V-tolerant analog/diode I/O (FT_ea), default GPIO PA6 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART6_CTS, USART3_CTS, TIM16_CH1, LPUART1_CTS, COMP1_OUT, I2C2_SDA, I2C3_SDA and additional function ADC_IN6."+ },+ {+ "number": "32",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PA7 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, USART6_RTS_DE_CK, TIM14_CH1, TIM17_CH1, UCPD1_FRSTX, COMP2_OUT, I2C2_SCL, I2C3_SCL and additional function ADC_IN7."+ },+ {+ "number": "33",+ "name": "PC4",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PC4 with alternate functions USART3_TX, USART1_TX, TIM2_CH1_ETR, FDCAN1_RX and additional functions COMP1_INM7, ADC_IN17."+ },+ {+ "number": "34",+ "name": "PC5",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PC5 with alternate functions USART3_RX, USART1_RX, TIM2_CH2, FDCAN1_TX and additional functions COMP1_INP0, ADC_IN18, WKUP5."+ },+ {+ "number": "35",+ "name": "PB0",+ "type": "bidirectional",+ "description": "5V-tolerant analog/diode I/O (FT_ea), default GPIO PB0 with alternate functions SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, FDCAN2_RX, USART3_RX, LPTIM1_OUT, UCPD1_FRSTX, COMP1_OUT, USART5_TX, LPUART2_CTS and additional functions COMP3_INP0, ADC_IN8."+ },+ {+ "number": "36",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5V-tolerant analog/diode I/O (FT_ea), default GPIO PB1 with alternate functions TIM14_CH1, TIM3_CH4, TIM1_CH3N, FDCAN2_TX, USART3_RTS_DE_CK, LPTIM2_IN1, LPUART1_RTS_DE, COMP3_OUT, USART5_RX, LPUART2_RTS_DE and additional functions COMP1_INM6, ADC_IN9."+ },+ {+ "number": "37",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5V-tolerant analog/diode I/O (FT_ea), default GPIO PB2 with alternate functions SPI2_MISO/I2S2_MCK, MCO2, USART3_TX, LPTIM1_OUT, EVENTOUT and additional functions COMP1_INP1, COMP3_INM6, ADC_IN10."+ },+ {+ "number": "38",+ "name": "PF6",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF6 with alternate function LPUART1_RTS_DE."+ },+ {+ "number": "39",+ "name": "PF7",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF7 with alternate functions LPUART1_CTS, USART5_CTS."+ },+ {+ "number": "40",+ "name": "PE7",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PE7 with alternate functions TIM1_ETR, USART5_RTS_DE_CK and additional function COMP3_INP2."+ },+ {+ "number": "41",+ "name": "PE8",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PE8 with alternate functions USART4_TX, TIM1_CH1N and additional function COMP3_INM8."+ },+ {+ "number": "42",+ "name": "PE9",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE9 with alternate functions USART4_RX, TIM1_CH1."+ },+ {+ "number": "43",+ "name": "PE10",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE10 with alternate functions TIM1_CH2N, USART5_TX."+ },+ {+ "number": "44",+ "name": "PE11",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE11 with alternate functions TIM1_CH2, USART5_RX."+ },+ {+ "number": "45",+ "name": "PE12",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE12 with alternate functions SPI1_NSS/I2S1_WS, TIM1_CH3N."+ },+ {+ "number": "46",+ "name": "PE13",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE13 with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH3."+ },+ {+ "number": "47",+ "name": "PE14",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE14 with alternate functions SPI1_MISO/I2S1_MCK, TIM1_CH4, TIM1_BKIN2."+ },+ {+ "number": "48",+ "name": "PE15",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE15 with alternate functions SPI1_MOSI/I2S1_SD, TIM1_BKIN."+ },+ {+ "number": "49",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB10 with alternate functions CEC, LPUART1_RX, TIM2_CH3, USART3_TX, SPI2_SCK/I2S2_CK, I2C2_SCL, COMP1_OUT and additional function ADC_IN11."+ },+ {+ "number": "50",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB11 with alternate functions SPI2_MOSI/I2S2_SD, LPUART1_TX, TIM2_CH4, USART3_RX, I2C2_SDA, COMP2_OUT and additional function ADC_IN15."+ },+ {+ "number": "51",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB12 with alternate functions SPI2_NSS/I2S2_WS, LPUART1_RTS_DE, TIM1_BKIN, FDCAN2_RX, TIM15_BKIN, UCPD2_FRSTX, EVENTOUT, I2C2_SMBA and additional function ADC_IN16."+ },+ {+ "number": "52",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs), default GPIO PB13 with alternate functions SPI2_SCK/I2S2_CK, LPUART1_CTS, TIM1_CH1N, FDCAN2_TX, USART3_CTS, TIM15_CH1N, I2C2_SCL, EVENTOUT."+ },+ {+ "number": "53",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs), default GPIO PB14 with alternate functions SPI2_MISO/I2S2_MCK, UCPD1_FRSTX, TIM1_CH2N, USART3_RTS_DE_CK, TIM15_CH1, I2C2_SDA, EVENTOUT, USART6_RTS_DE_CK."+ },+ {+ "number": "54",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ USB Type-C PD capable I/O supplied from VDDIO2 (FT_fcs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA10 level; default GPIO PB15 with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, EVENTOUT, USART6_CTS and additional functions UCPD1_CC2, RTC_REFIN."+ },+ {+ "number": "55",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ USB Type-C PD capable I/O supplied from VDDIO2 (FT_fcs); may have a reset-time pull-down (disable via UCPDx_STROBE); default GPIO PA8 with alternate functions MCO, SPI2_NSS/I2S2_WS, TIM1_CH1, CRS1_SYNC, LPTIM2_OUT, EVENTOUT, I2C2_SMBA and additional function UCPD1_CC1."+ },+ {+ "number": "56",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ USB-PD dead-battery I/O supplied from VDDIO2 (FT_fds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA9 level; default GPIO PA9 with alternate functions MCO, USART1_TX, TIM1_CH2, SPI2_MISO/I2S2_MCK, TIM15_BKIN, I2C1_SCL, EVENTOUT, I2C2_SCL and additional function UCPD1_DBCC1."+ },+ {+ "number": "57",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC6 with alternate functions UCPD1_FRSTX, TIM3_CH1, TIM2_CH3, LPUART2_TX."+ },+ {+ "number": "58",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC7 with alternate functions UCPD2_FRSTX, TIM3_CH2, TIM2_CH4, LPUART2_RX."+ },+ {+ "number": "59",+ "name": "PD8",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD8 with alternate functions USART3_TX, SPI1_SCK/I2S1_CK, LPTIM1_OUT."+ },+ {+ "number": "60",+ "name": "PD9",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD9 with alternate functions USART3_RX, SPI1_NSS/I2S1_WS, TIM1_BKIN2."+ },+ {+ "number": "61",+ "name": "PD10",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD10 with alternate function MCO."+ },+ {+ "number": "62",+ "name": "PD11",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD11 with alternate functions USART3_CTS, LPTIM2_ETR."+ },+ {+ "number": "63",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin."+ },+ {+ "number": "64",+ "name": "VDDIO2",+ "type": "power_in",+ "description": "Independent I/O supply, 1.6 V to 3.6 V, powers selected I/Os and VDDUSB; must not be applied without valid VDD present."+ },+ {+ "number": "65",+ "name": "PD12",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD12 with alternate functions USART3_RTS_DE_CK, LPTIM2_IN1, TIM4_CH1, FDCAN1_RX."+ },+ {+ "number": "66",+ "name": "PD13",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD13 with alternate functions LPTIM2_OUT, TIM4_CH2, FDCAN1_TX."+ },+ {+ "number": "67",+ "name": "PD14",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD14 with alternate functions LPUART2_CTS, TIM4_CH3, FDCAN2_RX."+ },+ {+ "number": "68",+ "name": "PD15",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD15 with alternate functions CRS1_SYNC, LPUART2_RTS_DE, TIM4_CH4, FDCAN2_TX."+ },+ {+ "number": "69",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ USB-PD dead-battery I/O supplied from VDDIO2 (FT_fds); may have a reset-time pull-down (disable via UCPDx_STROBE); default GPIO PA10 with alternate functions SPI2_MOSI/I2S2_SD, USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT, I2C2_SDA and additional function UCPD1_DBCC2."+ },+ {+ "number": "70",+ "name": "PA11 [PA9]",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs); can be remapped to act as PA9 in place of pin 56 via SYSCFG_CFGR1; default GPIO PA11 with alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, FDCAN1_RX, TIM1_BKIN2, I2C2_SCL, COMP1_OUT and additional function USB_DM."+ },+ {+ "number": "71",+ "name": "PA12 [PA10]",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O supplied from VDDIO2 (FT_fs); can be remapped to act as PA10 in place of pin 69 via SYSCFG_CFGR1; default GPIO PA12 with alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, FDCAN1_TX, I2S_CKIN, I2C2_SDA, COMP2_OUT and additional function USB_DP."+ },+ {+ "number": "72",+ "name": "PF8",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PF8 with no listed alternate or additional functions."+ },+ {+ "number": "73",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5V-tolerant switchable-diode I/O supplied from VDDIO2 (FT_es); configured at reset as SWDIO debug function with internal pull-up active; alternate functions SWDIO, IR_OUT, USB_NOE, EVENTOUT, LPUART2_RX."+ },+ {+ "number": "74",+ "name": "PA14-BOOT0",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s); configured at reset as SWCLK debug function with internal pull-down active; alternate functions SWCLK, USART2_TX, EVENTOUT, LPUART2_TX; additional function BOOT0 selects boot source at startup."+ },+ {+ "number": "75",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PA15 with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, MCO2, USART4_RTS_DE_CK, USART3_RTS_DE_CK, USB_NOE, EVENTOUT, I2C2_SMBA, SPI3_NSS."+ },+ {+ "number": "76",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC8 with alternate functions UCPD2_FRSTX, TIM3_CH3, TIM1_CH1, LPUART2_CTS."+ },+ {+ "number": "77",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PC9 with alternate functions I2S_CKIN, TIM3_CH4, TIM1_CH2, LPUART2_RTS_DE, USB_NOE."+ },+ {+ "number": "78",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5V-tolerant USB Type-C PD capable I/O supplied from VDDIO2 (FT_cs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PA10 level; default GPIO PD0 with alternate functions EVENTOUT, SPI2_NSS/I2S2_WS, TIM16_CH1, FDCAN1_RX and additional function UCPD2_CC1."+ },+ {+ "number": "79",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5V-tolerant USB-PD dead-battery I/O supplied from VDDIO2 (FT_ds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD1 level; default GPIO PD1 with alternate functions EVENTOUT, SPI2_SCK/I2S2_CK, TIM17_CH1, FDCAN1_TX and additional function UCPD2_DBCC1."+ },+ {+ "number": "80",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5V-tolerant USB Type-C PD capable I/O supplied from VDDIO2 (FT_cs); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD1 level; default GPIO PD2 with alternate functions USART3_RTS_DE_CK, TIM3_ETR, TIM1_CH1N, USART5_RX and additional function UCPD2_CC2."+ },+ {+ "number": "81",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5V-tolerant USB-PD dead-battery I/O supplied from VDDIO2 (FT_ds); may have a reset-time pull-down (disable via UCPDx_STROBE) depending on PD3 level; default GPIO PD3 with alternate functions USART2_CTS, SPI2_MISO/I2S2_MCK, TIM1_CH2N, USART5_TX and additional function UCPD2_DBCC2."+ },+ {+ "number": "82",+ "name": "PD4",+ "type": "bidirectional",+ "description": "5V-tolerant I/O supplied from VDDIO2 (FT_s), default GPIO PD4 with alternate functions USART2_RTS_DE_CK, SPI2_MOSI/I2S2_SD, TIM1_CH3N, USART5_RTS_DE_CK."+ },+ {+ "number": "83",+ "name": "PD5",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PD5 with alternate functions USART2_TX, SPI1_MISO/I2S1_MCK, TIM1_BKIN, USART5_CTS."+ },+ {+ "number": "84",+ "name": "PD6",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PD6 with alternate functions USART2_RX, SPI1_MOSI/I2S1_SD, LPTIM2_OUT."+ },+ {+ "number": "85",+ "name": "PD7",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PD7 with alternate function MCO2."+ },+ {+ "number": "86",+ "name": "PF9",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF9 with alternate function USART6_TX."+ },+ {+ "number": "87",+ "name": "PF10",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF10 with alternate function USART6_RX."+ },+ {+ "number": "88",+ "name": "PF11",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF11 with alternate function USART6_RTS_DE_CK."+ },+ {+ "number": "89",+ "name": "PF12",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF12 with alternate functions TIM15_CH1, USART6_CTS."+ },+ {+ "number": "90",+ "name": "PF13",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PF13 with alternate function TIM15_CH2."+ },+ {+ "number": "91",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PB3 with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART5_TX, USART1_RTS_DE_CK, I2C3_SCL, EVENTOUT, I2C2_SCL, SPI3_SCK and additional function COMP2_INM6."+ },+ {+ "number": "92",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5V-tolerant analog-switch I/O (FT_a), default GPIO PB4 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART5_RX, USART1_CTS, TIM17_BKIN, I2C3_SDA, EVENTOUT, I2C2_SDA, SPI3_MISO and additional function COMP2_INP0."+ },+ {+ "number": "93",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PB5 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN2_RX, LPTIM1_IN1, I2C1_SMBA, COMP2_OUT, USART5_RTS_DE_CK, SPI3_MOSI and additional function WKUP6."+ },+ {+ "number": "94",+ "name": "PE0",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE0 with alternate functions TIM16_CH1, EVENTOUT, TIM4_ETR."+ },+ {+ "number": "95",+ "name": "PE1",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE1 with alternate functions TIM17_CH1, EVENTOUT."+ },+ {+ "number": "96",+ "name": "PE2",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE2 with alternate function TIM3_ETR."+ },+ {+ "number": "97",+ "name": "PE3",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT), default GPIO PE3 with alternate function TIM3_CH1."+ },+ {+ "number": "98",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB6 with alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, FDCAN2_TX, SPI2_MISO/I2S2_MCK, LPTIM1_ETR, I2C1_SCL, EVENTOUT, USART5_CTS, TIM4_CH1, LPUART2_TX and additional function COMP2_INP1."+ },+ {+ "number": "99",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ analog-switch I/O (FT_fa), default GPIO PB7 with alternate functions USART1_RX, SPI2_MOSI/I2S2_SD, TIM17_CH1N, USART4_CTS, LPTIM1_IN2, I2C1_SDA, EVENTOUT, TIM4_CH2, LPUART2_RX and additional functions COMP2_INM7, PVD_IN."+ },+ {+ "number": "100",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f), default GPIO PB8 with alternate functions CEC, SPI2_SCK/I2S2_CK, TIM16_CH1, FDCAN1_RX, USART3_TX, TIM15_BKIN, I2C1_SCL, EVENTOUT, USART6_TX, TIM4_CH3."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: VDDIO2 pins (PC6, PC7, PD4, PD8, PD9, PD10, PD12-PD15, PC8, PC9, PF8, PB13, PB14) are supplied by in; USB signal pins (PA11, PA12) can be remapped from PA9, PA10 using SYSCFG_CFGR1 register; PA8, PB15, PD0, PD2 have pull-down resistors that may activate based on voltage levels on PA9, PA10,",+ "18/100 pins cited to the wrong page (name found elsewhere): ['11:VBAT@p17', '12:VREF+@p17', '13:VDD/VDDA@p17', '14:VSS/VSSA@p17']"+ ],+ "pages_sent": 83,+ "cost_usd": 1.5402,+ "at": "2026-09-23T06:18:28"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603393162840711168",+ "pages": 159,+ "sha256": "19ad77934ee0849d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 100,+ "described": 100,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}