STM32G030K8T6TR

@@ -0,0 +1,78 @@+# STM32G030K8T6TR++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)++STM32G030K8T6TR from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PB9 | bidirectional | Port B bit 9. 5 V-tolerant FT_f I/O. Default GPIO after reset (analog input). Alternate: IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, EVENTOUT. |+| 2 | PC14-OSC32_IN | bidirectional | Port C bit 14 / LSE 32 kHz crystal input. 5 V-tolerant FT I/O. Additional function OSC32_IN (LSE oscillator). Alternate: TIM1_BK2. Supplied through the RTC/backup power switch; drive current limited to ~3 mA. |+| 3 | PC15-OSC32_OUT | bidirectional | Port C bit 15 / LSE 32 kHz crystal output. 5 V-tolerant FT I/O. Additional function OSC32_OUT. Alternate: OSC32_EN, OSC_EN. Supplied through the RTC/backup power switch. |+| 4 | VDD/VDDA | power_in | Combined digital and analog positive supply. Operating range 2.0 V to 3.6 V. Bypass with the recommended decoupling network. |+| 5 | VSS/VSSA | power_in | Combined digital and analog ground reference (0 V). |+| 6 | NRST | bidirectional | Active-low system reset. Bidirectional RST-type pin with an embedded weak pull-up. Drive low to reset the device; internally asserted low during POR/BOR. |+| 7 | PA0 | bidirectional | Port A bit 0. FT_a 5 V-tolerant I/O with analog switch. Alternate: SPI2_SCK, USART2_CTS. Additional: ADC_IN0, TAMP_IN2, WKUP1. Default at reset: analog input. |+| 8 | PA1 | bidirectional | Port A bit 1. FT_ea 5 V-tolerant I/O with analog switch and diode to VDD. Alternate: SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, I2C1_SMBA, EVENTOUT. Additional: ADC_IN1. |+| 9 | PA2 | bidirectional | Port A bit 2. FT_a I/O. Alternate: SPI1_MOSI/I2S1_SD, USART2_TX. Additional: ADC_IN2, WKUP4, LSCO. |+| 10 | PA3 | bidirectional | Port A bit 3. FT_ea I/O. Alternate: SPI2_MISO, USART2_RX, EVENTOUT. Additional: ADC_IN3. |+| 11 | PA4 | bidirectional | Port A bit 4. FT_a I/O. Alternate: SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, EVENTOUT. Additional: ADC_IN4, TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2. |+| 12 | PA5 | bidirectional | Port A bit 5. FT_ea I/O. Alternate: SPI1_SCK/I2S1_CK, EVENTOUT. Additional: ADC_IN5. |+| 13 | PA6 | bidirectional | Port A bit 6. FT_ea I/O. Alternate: SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1. Additional: ADC_IN6. |+| 14 | PA7 | bidirectional | Port A bit 7. FT_a I/O. Alternate: SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1. Additional: ADC_IN7. |+| 15 | PB0 | bidirectional | Port B bit 0. FT_ea I/O. Alternate: SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N. Additional: ADC_IN8. |+| 16 | PB1 | bidirectional | Port B bit 1. FT_ea I/O. Alternate: TIM14_CH1, TIM3_CH4, TIM1_CH3N, EVENTOUT. Additional: ADC_IN9. |+| 17 | PB2 | bidirectional | Port B bit 2. FT_ea I/O. Alternate: SPI2_MISO, EVENTOUT. Additional: ADC_IN10. |+| 18 | PA8 | bidirectional | Port A bit 8. FT I/O. Alternate: MCO, SPI2_NSS, TIM1_CH1, EVENTOUT. |+| 19 | PA9 | bidirectional | Port A bit 9. FT_f (Fm+ capable) I/O. Alternate: MCO, USART1_TX, TIM1_CH2, SPI2_MISO, I2C1_SCL, EVENTOUT. |+| 20 | PC6 | bidirectional | Port C bit 6. FT I/O. Alternate: TIM3_CH1. |+| 21 | PA10 | bidirectional | Port A bit 10. FT_f (Fm+ capable) I/O. Alternate: SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BK, I2C1_SDA, EVENTOUT. |+| 22 | PA11 [PA9] | bidirectional | Port A bit 11 (remappable to PA9 via SYSCFG_CFGR1). FT_fa I/O (Fm+ capable, analog switch). Alternate: SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BK2, I2C2_SCL. Additional: ADC_IN15. |+| 23 | PA12 [PA10] | bidirectional | Port A bit 12 (remappable to PA10 via SYSCFG_CFGR1). FT_fa I/O. Alternate: SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA. Additional: ADC_IN16. |+| 24 | PA13 | bidirectional | SWDIO by default after reset (SW debug data). FT_ea I/O with internal pull-up enabled at reset. Alternate: SWDIO, IR_OUT, EVENTOUT. Additional: ADC_IN17. |+| 25 | PA14-BOOT0 | bidirectional | SWCLK by default after reset (SW debug clock) and BOOT0 selector. FT_a I/O with internal pull-down enabled at reset. Alternate: SWCLK, USART2_TX, EVENTOUT. Additional: ADC_IN18, BOOT0. |+| 26 | PA15 | bidirectional | Port A bit 15. FT I/O. Alternate: SPI1_NSS/I2S1_WS, USART2_RX, EVENTOUT. |+| 27 | PB3 | bidirectional | Port B bit 3. FT I/O. Alternate: SPI1_SCK/I2S1_CK, TIM1_CH2, USART1_RTS_DE_CK, EVENTOUT. |+| 28 | PB4 | bidirectional | Port B bit 4. FT I/O. Alternate: SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BK, EVENTOUT. |+| 29 | PB5 | bidirectional | Port B bit 5. FT I/O. Alternate: SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BK, I2C1_SMBA. Additional: WKUP6. |+| 30 | PB6 | bidirectional | Port B bit 6. FT_f (Fm+ capable) I/O. Alternate: USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, I2C1_SCL, EVENTOUT. |+| 31 | PB7 | bidirectional | Port B bit 7. FT_fa I/O (Fm+ capable, analog switch). Alternate: USART1_RX, SPI2_MOSI, TIM17_CH1N, I2C1_SDA, EVENTOUT. Additional: ADC_IN11. |+| 32 | PB8 | bidirectional | Port B bit 8. FT_f (Fm+ capable) I/O. Alternate: SPI2_SCK, TIM16_CH1, I2C1_SCL, EVENTOUT. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-32(7x7) |+| Category | MCU |+| Pins | 32 |++## Ordering variants++- `STM32G030K8T6TRK6T`+- `STM32G030K8T6TR`+- `STM32G030K8T6TRC6T`+- `STM32G030K8T6TRC8T`+- `STM32G030K8T6TRF6P`+- `STM32G030K8T6TRF8P`+- `STM32G030K8T6TRJ6M`+- `STM32G030K8T6TRJ8M`++## CAD (KiCad official)++- Symbol: `STM32G030K8T6TR`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32g030k8t6tr.pdf) (93 pp, sha256 `bd4d70f72b2e82c5`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g030k8t6tr-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "stm32g030k8t6tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "mcu",+    "stm32g030k8t6tr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32g030k8t6tr.kicad_sym",+    "stm32g030k8t6tr.kicad_mod",+    "stm32g030k8t6tr.glb",+    "stm32g030k8t6tr.step",+    "stm32g030k8t6tr.lbr",+    "docs/hero.png",+    "docs/stm32g030k8t6tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file