STM32G030K8T6

@@ -0,0 +1,76 @@+# STM32G030K8T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)++STM32G030K8T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PB9 | bidirectional | PB9 general-purpose 5V-tolerant I/O (FT_f). Alternate: IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, EVENTOUT. Fm+ capable. |+| 2 | PC14-OSC32_IN | bidirectional | PC14 / low-speed 32.768 kHz crystal oscillator input (OSC32_IN). 5V-tolerant (FT). Powered through the RTC power switch (max 3 mA sink); output speed limited to 2 MHz / 30 pF max. Alternate: TIM1_BK2. |+| 3 | PC15-OSC32_OUT | bidirectional | PC15 / low-speed 32.768 kHz crystal oscillator output (OSC32_OUT). 5V-tolerant (FT). Powered through the RTC power switch (max 3 mA sink). Alternate: OSC32_EN, OSC_EN. |+| 4 | VDD/VDDA | power_in | Digital and analog positive supply (merged VDD/VDDA rail). Operating range 2.0-3.6 V. Decouple with 1x 100 nF + 1x 4.7 uF ceramic close to the pin. |+| 5 | VSS/VSSA | power_in | Digital and analog ground (merged VSS/VSSA return). |+| 6 | NRST | bidirectional | Bidirectional device reset input/open-drain output with embedded weak pull-up (~40 kΩ). Active low; drive low to reset the MCU. |+| 7 | PA0 | bidirectional | PA0 general-purpose 5V-tolerant I/O with analog switch (FT_a). Analog: ADC_IN0, TAMP_IN2, WKUP1. Alternate: SPI2_SCK, USART2_CTS. |+| 8 | PA1 | bidirectional | PA1 general-purpose 5V-tolerant I/O with analog switch and switchable diode to VDDIO (FT_ea). Analog: ADC_IN1. Alternate: SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, I2C1_SMBA, EVENTOUT. |+| 9 | PA2 | bidirectional | PA2 general-purpose 5V-tolerant I/O with analog switch (FT_a). Analog: ADC_IN2, WKUP4, LSCO. Alternate: SPI1_MOSI/I2S1_SD, USART2_TX. |+| 10 | PA3 | bidirectional | PA3 general-purpose 5V-tolerant I/O with analog switch and switchable diode to VDDIO (FT_ea). Analog: ADC_IN3. Alternate: SPI2_MISO, USART2_RX, EVENTOUT. |+| 11 | PA4 | bidirectional | PA4 general-purpose 5V-tolerant I/O with analog switch (FT_a). Analog: ADC_IN4, TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2. Alternate: SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, EVENTOUT. |+| 12 | PA5 | bidirectional | PA5 general-purpose 5V-tolerant I/O with analog switch and switchable diode to VDDIO (FT_ea). Analog: ADC_IN5. Alternate: SPI1_SCK/I2S1_CK, EVENTOUT. |+| 13 | PA6 | bidirectional | PA6 general-purpose 5V-tolerant I/O with analog switch and switchable diode to VDDIO (FT_ea). Analog: ADC_IN6. Alternate: SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1. |+| 14 | PA7 | bidirectional | PA7 general-purpose 5V-tolerant I/O with analog switch (FT_a). Analog: ADC_IN7. Alternate: SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1. |+| 15 | PB0 | bidirectional | PB0 general-purpose 5V-tolerant I/O with analog switch and switchable diode to VDDIO (FT_ea). Analog: ADC_IN8. Alternate: SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N. |+| 16 | PB1 | bidirectional | PB1 general-purpose 5V-tolerant I/O with analog switch and switchable diode to VDDIO (FT_ea). Analog: ADC_IN9. Alternate: TIM14_CH1, TIM3_CH4, TIM1_CH3N, EVENTOUT. |+| 17 | PB2 | bidirectional | PB2 general-purpose 5V-tolerant I/O with analog switch and switchable diode to VDDIO (FT_ea). Analog: ADC_IN10. Alternate: SPI2_MISO, EVENTOUT. |+| 18 | PA8 | bidirectional | PA8 general-purpose 5V-tolerant I/O (FT). Alternate: MCO, SPI2_NSS, TIM1_CH1, EVENTOUT. |+| 19 | PA9 | bidirectional | PA9 general-purpose 5V-tolerant I/O, Fm+ capable (FT_f). Alternate: MCO, USART1_TX, TIM1_CH2, SPI2_MISO, I2C1_SCL, EVENTOUT. |+| 20 | PC6 | bidirectional | PC6 general-purpose 5V-tolerant I/O (FT). Alternate: TIM3_CH1. |+| 21 | PA10 | bidirectional | PA10 general-purpose 5V-tolerant I/O, Fm+ capable (FT_f). Alternate: SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BKIN, I2C1_SDA, EVENTOUT. |+| 22 | PA11 [PA9] | bidirectional | PA11 general-purpose 5V-tolerant I/O, Fm+ capable, with analog switch (FT_fa). Analog: ADC_IN15. Alternate: SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BKIN2, I2C2_SCL. |+| 23 | PA12 [PA10] | bidirectional | PA12 general-purpose 5V-tolerant I/O, Fm+ capable, with analog switch (FT_fa). Analog: ADC_IN16. Alternate: SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA. |+| 24 | PA13 | bidirectional | PA13 5V-tolerant I/O with analog switch and switchable diode to VDDIO (FT_ea). Default after reset: SWDIO with internal pull-up enabled. Analog: ADC_IN17. Alternate: SWDIO, IR_OUT, EVENTOUT. |+| 25 | PA14-BOOT0 | bidirectional | PA14 5V-tolerant I/O with analog switch (FT_a). Default after reset: SWCLK with internal pull-down enabled; also samples BOOT0 selection at reset. Analog: ADC_IN18. Alternate: SWCLK, USART2_TX, EVENTOUT. Additional: BOOT0. |+| 26 | PA15 | bidirectional | PA15 general-purpose 5V-tolerant I/O (FT). Alternate: SPI1_NSS/I2S1_WS, USART2_RX, EVENTOUT. |+| 27 | PB3 | bidirectional | PB3 general-purpose 5V-tolerant I/O (FT). Alternate: SPI1_SCK/I2S1_CK, TIM1_CH2, USART1_RTS_DE_CK, EVENTOUT. |+| 28 | PB4 | bidirectional | PB4 general-purpose 5V-tolerant I/O (FT). Alternate: SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BKIN, EVENTOUT. |+| 29 | PB5 | bidirectional | PB5 general-purpose 5V-tolerant I/O (FT). Additional: WKUP6. Alternate: SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, I2C1_SMBA. |+| 30 | PB6 | bidirectional | PB6 general-purpose 5V-tolerant I/O, Fm+ capable (FT_f). Alternate: USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, I2C1_SCL, EVENTOUT. |+| 31 | PB7 | bidirectional | PB7 general-purpose 5V-tolerant I/O, Fm+ capable, with analog switch (FT_fa). Analog: ADC_IN11. Alternate: USART1_RX, SPI2_MOSI, TIM17_CH1N, I2C1_SDA, EVENTOUT. |+| 32 | PB8 | bidirectional | PB8 general-purpose 5V-tolerant I/O, Fm+ capable (FT_f). Alternate: SPI2_SCK, TIM16_CH1, I2C1_SCL, EVENTOUT. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-32(7x7) |+| Category | MCU |+| Pins | 32 |++## Ordering variants++- `STM32G030K8T6`+- `STM32G030K8T6STM32G030K6T6`+- `STM32G030K8T6STM32G030C8T6`+- `STM32G030K8T6STM32G030C6T6`+- `STM32G030K8T6STM32G030F6P6`+- `STM32G030K8T6STM32G030J6M6`++## CAD (KiCad official)++- Symbol: `STM32G030K8T6`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32g030k8t6.pdf) (94 pp, sha256 `a2e3c1f49a1324cb`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g030k8t6-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "stm32g030k8t6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "mcu",+    "stm32g030k8t6"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32g030k8t6.kicad_sym",+    "stm32g030k8t6.kicad_mod",+    "stm32g030k8t6.glb",+    "stm32g030k8t6.step",+    "stm32g030k8t6.lbr",+    "docs/hero.png",+    "docs/stm32g030k8t6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file