component
STM32F767ZIT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-144(20x20). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+180@@ -0,0 +1,180 @@+# STM32F767ZIT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-144(20x20)++STM32F767ZIT6 from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | 5 V-tolerant I/O (FT) with TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, ETH_MII_TXD3, FMC_A23 and EVENTOUT alternate functions. |+| 2 | PE3 | bidirectional | 5 V-tolerant I/O (FT) with TRACED0, SAI1_SD_B, FMC_A19 and EVENTOUT alternate functions. |+| 3 | PE4 | bidirectional | 5 V-tolerant I/O (FT) with TRACED1, SPI4_NSS, SAI1_FS_A, DFSDM1_DATIN3, FMC_A20, DCMI_D4, LCD_B0 and EVENTOUT alternate functions. |+| 4 | PE5 | bidirectional | 5 V-tolerant I/O (FT) with TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, DFSDM1_CKIN3, FMC_A21, DCMI_D6, LCD_G0 and EVENTOUT alternate functions. |+| 5 | PE6 | bidirectional | 5 V-tolerant I/O (FT) with TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCLK_B, FMC_A22, DCMI_D7, LCD_G1 and EVENTOUT alternate functions. |+| 6 | VBAT | power_in | Backup supply pin powering the RTC, 32 backup registers and backup SRAM when VDD is not present. |+| 7 | PC13 | bidirectional | 5 V-tolerant I/O supplied through the power switch (3 mA sink limit, max 2 MHz with 30 pF load, not a current source), with RTC_TAMP1/RTC_TS/RTC_OUT/WKUP4 additional functions and EVENTOUT. |+| 8 | PC14-OSC32_IN | bidirectional | I/O supplied through the power switch (3 mA sink limit, max 2 MHz with 30 pF load), also the 32 kHz oscillator input (OSC32_IN); 5 V tolerant except in oscillator mode. |+| 9 | PC15-OSC32_OUT | bidirectional | I/O supplied through the power switch (3 mA sink limit, max 2 MHz with 30 pF load), also the 32 kHz oscillator output (OSC32_OUT); 5 V tolerant except in oscillator mode. |+| 10 | PF0 | bidirectional | 5 V-tolerant I/O (FT) with I2C2_SDA, FMC_A0 and EVENTOUT alternate functions. |+| 11 | PF1 | bidirectional | 5 V-tolerant I/O (FT) with I2C2_SCL, FMC_A1 and EVENTOUT alternate functions. |+| 12 | PF2 | bidirectional | 5 V-tolerant I/O (FT) with I2C2_SMBA, FMC_A2 and EVENTOUT alternate functions. |+| 13 | PF3 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A3 and EVENTOUT alternate functions and ADC3_IN9 analog input. |+| 14 | PF4 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A4 and EVENTOUT alternate functions and ADC3_IN14 analog input. |+| 15 | PF5 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A5 and EVENTOUT alternate functions and ADC3_IN15 analog input. |+| 16 | VSS | power_in | Ground supply pin. |+| 17 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 18 | PF6 | bidirectional | 5 V-tolerant I/O (FT) with TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_RX, QUADSPI_BK1_IO3 and EVENTOUT alternate functions and ADC3_IN4 analog input. |+| 19 | PF7 | bidirectional | 5 V-tolerant I/O (FT) with TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_TX, QUADSPI_BK1_IO2 and EVENTOUT alternate functions and ADC3_IN5 analog input. |+| 20 | PF8 | bidirectional | 5 V-tolerant I/O (FT) with SPI5_MISO, SAI1_SCK_B, UART7_RTS, TIM13_CH1, QUADSPI_BK1_IO0 and EVENTOUT alternate functions and ADC3_IN6 analog input. |+| 21 | PF9 | bidirectional | 5 V-tolerant I/O (FT) with SPI5_MOSI, SAI1_FS_B, UART7_CTS, TIM14_CH1, QUADSPI_BK1_IO1 and EVENTOUT alternate functions and ADC3_IN7 analog input. |+| 22 | PF10 | bidirectional | 5 V-tolerant I/O (FT) with QUADSPI_CLK, DCMI_D11, LCD_DE and EVENTOUT alternate functions and ADC3_IN8 analog input. |+| 23 | PH0-OSC_IN | bidirectional | I/O that is also the 4-26 MHz main oscillator input (OSC_IN); 5 V tolerant except in oscillator mode. |+| 24 | PH1-OSC_OUT | bidirectional | I/O that is also the 4-26 MHz main oscillator output (OSC_OUT); 5 V tolerant except in oscillator mode. |+| 25 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor. |+| 26 | PC0 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKIN0, DFSDM1_DATIN4, SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_R5 and EVENTOUT alternate functions and ADC1/2/3_IN10 analog inputs. |+| 27 | PC1 | bidirectional | 5 V-tolerant I/O (FT) with TRACED0, DFSDM1_DATIN0, SPI2_MOSI/I2S2_SD, SAI1_SD_A, DFSDM1_CKIN4, ETH_MDC, MDIOS_MDC and EVENTOUT alternate functions and ADC1/2/3_IN11, RTC_TAMP3/WKUP3 additional functions. |+| 28 | PC2 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKIN1, SPI2_MISO, DFSDM1_CKOUT, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0 and EVENTOUT alternate functions and ADC1/2/3_IN12 analog inputs. |+| 29 | PC3 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_DATIN1, SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0 and EVENTOUT alternate functions and ADC1/2/3_IN13 analog inputs. |+| 30 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 31 | VSSA | power_in | Analog ground supply pin. |+| 32 | VREF+ | power_in | Positive analog reference voltage input for the ADCs and DACs. |+| 33 | VDDA | power_in | Analog supply pin (1.7 V to 3.6 V application supply range). |+| 34 | PA0-WKUP | bidirectional | 5 V-tolerant I/O (FT) with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, ETH_MII_CRS and EVENTOUT alternate functions, ADC1/2/3_IN0 and WKUP1; used as internal reset (active low) in regulator OFF/internal reset ON mode. |+| 35 | PA1 | bidirectional | 5 V-tolerant I/O (FT) with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCLK_B, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, LCD_R2 and EVENTOUT alternate functions and ADC1/2/3_IN1 analog inputs. |+| 36 | PA2 | bidirectional | 5 V-tolerant I/O (FT) with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, ETH_MDIO, MDIOS_MDIO, LCD_R1 and EVENTOUT alternate functions, ADC1/2/3_IN2 and WKUP2. |+| 37 | PA3 | bidirectional | 5 V-tolerant I/O (FT) with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, LCD_B2, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5 and EVENTOUT alternate functions and ADC1/2/3_IN3 analog inputs. |+| 38 | VSS | power_in | Ground supply pin. |+| 39 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 40 | PA4 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, SPI6_NSS, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC and EVENTOUT alternate functions, ADC1/2_IN4 and DAC_OUT1. |+| 41 | PA5 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, SPI6_SCK, OTG_HS_ULPI_CK, LCD_R4 and EVENTOUT alternate functions, ADC1/2_IN5 and DAC_OUT2. |+| 42 | PA6 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, SPI6_MISO, TIM13_CH1, MDIOS_MDC, DCMI_PIXCLK, LCD_G2 and EVENTOUT alternate functions and ADC1/2_IN6 analog inputs. |+| 43 | PA7 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, SPI6_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, FMC_SDNWE and EVENTOUT alternate functions and ADC1/2_IN7 analog inputs. |+| 44 | PC4 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKIN2, I2S1_MCK, SPDIF_RX2, ETH_MII_RXD0/ETH_RMII_RXD0, FMC_SDNE0 and EVENTOUT alternate functions and ADC1/2_IN14 analog inputs. |+| 45 | PC5 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_DATIN2, SPDIF_RX3, ETH_MII_RXD1/ETH_RMII_RXD1, FMC_SDCKE0 and EVENTOUT alternate functions and ADC1/2_IN15 analog inputs. |+| 46 | PB0 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, DFSDM1_CKOUT, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, LCD_G1 and EVENTOUT alternate functions and ADC1/2_IN8 analog inputs. |+| 47 | PB1 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, LCD_G0 and EVENTOUT alternate functions and ADC1/2_IN9 analog inputs. |+| 48 | PB2 | bidirectional | 5 V-tolerant I/O (FT) with SAI1_SD_A, SPI3_MOSI/I2S3_SD, QUADSPI_CLK, DFSDM1_CKIN1 and EVENTOUT alternate functions. |+| 49 | PF11 | bidirectional | 5 V-tolerant I/O (FT) with SPI5_MOSI, SAI2_SD_B, FMC_SDNRAS, DCMI_D12 and EVENTOUT alternate functions. |+| 50 | PF12 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A6 and EVENTOUT alternate functions. |+| 51 | VSS | power_in | Ground supply pin. |+| 52 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 53 | PF13 | bidirectional | 5 V-tolerant I/O (FT) with I2C4_SMBA, DFSDM1_DATIN6, FMC_A7 and EVENTOUT alternate functions. |+| 54 | PF14 | bidirectional | 5 V-tolerant I/O (FT) with I2C4_SCL, DFSDM1_CKIN6, FMC_A8 and EVENTOUT alternate functions. |+| 55 | PF15 | bidirectional | 5 V-tolerant I/O (FT) with I2C4_SDA, FMC_A9 and EVENTOUT alternate functions. |+| 56 | PG0 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A10 and EVENTOUT alternate functions. |+| 57 | PG1 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A11 and EVENTOUT alternate functions. |+| 58 | PE7 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0, FMC_D4 and EVENTOUT alternate functions. |+| 59 | PE8 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5 and EVENTOUT alternate functions. |+| 60 | PE9 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6 and EVENTOUT alternate functions. |+| 61 | VSS | power_in | Ground supply pin. |+| 62 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 63 | PE10 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7 and EVENTOUT alternate functions. |+| 64 | PE11 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH2, SPI4_NSS, DFSDM1_CKIN4, SAI2_SD_B, FMC_D8, LCD_G3 and EVENTOUT alternate functions. |+| 65 | PE12 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH3N, SPI4_SCK, DFSDM1_DATIN5, SAI2_SCK_B, FMC_D9, LCD_B4 and EVENTOUT alternate functions. |+| 66 | PE13 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH3, SPI4_MISO, DFSDM1_CKIN5, SAI2_FS_B, FMC_D10, LCD_DE and EVENTOUT alternate functions. |+| 67 | PE14 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11, LCD_CLK and EVENTOUT alternate functions. |+| 68 | PE15 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_BKIN, FMC_D12, LCD_R7 and EVENTOUT alternate functions. |+| 69 | PB10 | bidirectional | 5 V-tolerant I/O (FT) with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, QUADSPI_BK1_NCS, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4 and EVENTOUT alternate functions. |+| 70 | PB11 | bidirectional | 5 V-tolerant I/O (FT) with TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, DSI_TE, LCD_G5 and EVENTOUT alternate functions. |+| 71 | VCAP_1 | passive | Supply pin for connecting the external capacitor of the internal 1.2 V voltage regulator. |+| 72 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 73 | PB12 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, DFSDM1_DATIN1, USART3_CK, UART5_RX, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID and EVENTOUT alternate functions. |+| 74 | PB13 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH1N, SPI2_SCK/I2S2_CK, DFSDM1_CKIN1, USART3_CTS, UART5_TX, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1 and EVENTOUT alternate functions, plus OTG_HS_VBUS. |+| 75 | PB14 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH2N, TIM8_CH2N, USART1_TX, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS, UART4_RTS, TIM12_CH1, SDMMC2_D0, OTG_HS_DM and EVENTOUT alternate functions. |+| 76 | PB15 | bidirectional | 5 V-tolerant I/O (FT) with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, UART4_CTS, TIM12_CH2, SDMMC2_D1, OTG_HS_DP and EVENTOUT alternate functions. |+| 77 | PD8 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKIN3, USART3_TX, SPDIF_RX1, FMC_D13 and EVENTOUT alternate functions. |+| 78 | PD9 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_DATIN3, USART3_RX, FMC_D14 and EVENTOUT alternate functions. |+| 79 | PD10 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKOUT, USART3_CK, FMC_D15, LCD_B3 and EVENTOUT alternate functions. |+| 80 | PD11 | bidirectional | 5 V-tolerant I/O (FT) with I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A, FMC_A16/FMC_CLE and EVENTOUT alternate functions. |+| 81 | PD12 | bidirectional | 5 V-tolerant I/O (FT) with TIM4_CH1, LPTIM1_IN1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE and EVENTOUT alternate functions. |+| 82 | PD13 | bidirectional | 5 V-tolerant I/O (FT) with TIM4_CH2, LPTIM1_OUT, I2C4_SDA, QUADSPI_BK1_IO3, SAI2_SCK_A, FMC_A18 and EVENTOUT alternate functions. |+| 83 | VSS | power_in | Ground supply pin. |+| 84 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 85 | PD14 | bidirectional | 5 V-tolerant I/O (FT) with TIM4_CH3, UART8_CTS, FMC_D0 and EVENTOUT alternate functions. |+| 86 | PD15 | bidirectional | 5 V-tolerant I/O (FT) with TIM4_CH4, UART8_RTS, FMC_D1 and EVENTOUT alternate functions. |+| 87 | PG2 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A12 and EVENTOUT alternate functions. |+| 88 | PG3 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A13 and EVENTOUT alternate functions. |+| 89 | PG4 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A14/FMC_BA0 and EVENTOUT alternate functions. |+| 90 | PG5 | bidirectional | 5 V-tolerant I/O (FT) with FMC_A15/FMC_BA1 and EVENTOUT alternate functions. |+| 91 | PG6 | bidirectional | 5 V-tolerant I/O (FT) with FMC_NE3, DCMI_D12, LCD_R7 and EVENTOUT alternate functions. |+| 92 | PG7 | bidirectional | 5 V-tolerant I/O (FT) with SAI1_MCLK_A, USART6_CK, FMC_INT, DCMI_D13, LCD_CLK and EVENTOUT alternate functions. |+| 93 | PG8 | bidirectional | 5 V-tolerant I/O (FT) with SPI6_NSS, SPDIF_RX2, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, LCD_G7 and EVENTOUT alternate functions. |+| 94 | VSS | power_in | Ground supply pin. |+| 95 | VDDUSB | power_in | Dedicated supply pin for the USB OTG_FS and OTG_HS interfaces. |+| 96 | PC6 | bidirectional | 5 V-tolerant I/O (FT) with TIM3_CH1, TIM8_CH1, I2S2_MCK, DFSDM1_CKIN3, USART6_TX, FMC_NWAIT, SDMMC2_D6, SDMMC1_D6, DCMI_D0, LCD_HSYNC and EVENTOUT alternate functions. |+| 97 | PC7 | bidirectional | 5 V-tolerant I/O (FT) with TIM3_CH2, TIM8_CH2, I2S3_MCK, DFSDM1_DATIN3, USART6_RX, FMC_NE1, SDMMC2_D7, SDMMC1_D7, DCMI_D1, LCD_G6 and EVENTOUT alternate functions. |+| 98 | PC8 | bidirectional | 5 V-tolerant I/O (FT) with TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, FMC_NE2/FMC_NCE, SDMMC1_D0, DCMI_D2 and EVENTOUT alternate functions. |+| 99 | PC9 | bidirectional | 5 V-tolerant I/O (FT) with MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, LCD_G3, SDMMC1_D1, DCMI_D3, LCD_B2 and EVENTOUT alternate functions. |+| 100 | PA8 | bidirectional | 5 V-tolerant I/O (FT) with MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, CAN3_RX, UART7_RX, LCD_B3, LCD_R6 and EVENTOUT alternate functions. |+| 101 | PA9 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0, LCD_R5 and EVENTOUT alternate functions, plus OTG_FS_VBUS. |+| 102 | PA10 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH3, USART1_RX, LCD_B4, OTG_FS_ID, MDIOS_MDIO, DCMI_D1, LCD_B1 and EVENTOUT alternate functions. |+| 103 | PA11 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_CH4, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, CAN1_RX, OTG_FS_DM, LCD_R4 and EVENTOUT alternate functions. |+| 104 | PA12 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_ETR, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, LCD_R5 and EVENTOUT alternate functions. |+| 105 | PA13(JTMS-SWDIO) | bidirectional | 5 V-tolerant I/O (FT) that is JTMS-SWDIO after reset, with EVENTOUT alternate function. |+| 106 | VCAP_2 | passive | Supply pin for connecting the external capacitor of the internal 1.2 V voltage regulator. |+| 107 | VSS | power_in | Ground supply pin. |+| 108 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 109 | PA14(JTCK-SWCLK) | bidirectional | 5 V-tolerant I/O (FT) that is JTCK-SWCLK after reset, with EVENTOUT alternate function. |+| 110 | PA15(JTDI) | bidirectional | 5 V-tolerant I/O (FT) that is JTDI after reset, with TIM2_CH1/ETR, HDMI_CEC, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, SPI6_NSS, UART4_RTS, CAN3_TX, UART7_TX and EVENTOUT alternate functions. |+| 111 | PC10 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, DCMI_D8, LCD_R2 and EVENTOUT alternate functions. |+| 112 | PC11 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_DATIN5, SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, DCMI_D4 and EVENTOUT alternate functions. |+| 113 | PC12 | bidirectional | 5 V-tolerant I/O (FT) with TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9 and EVENTOUT alternate functions. |+| 114 | PD0 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKIN6, DFSDM1_DATIN7, UART4_RX, CAN1_RX, FMC_D2 and EVENTOUT alternate functions. |+| 115 | PD1 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_DATIN6, DFSDM1_CKIN7, UART4_TX, CAN1_TX, FMC_D3 and EVENTOUT alternate functions. |+| 116 | PD2 | bidirectional | 5 V-tolerant I/O (FT) with TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, DCMI_D11 and EVENTOUT alternate functions. |+| 117 | PD3 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, DFSDM1_DATIN0, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7 and EVENTOUT alternate functions. |+| 118 | PD4 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKIN0, USART2_RTS, FMC_NOE and EVENTOUT alternate functions. |+| 119 | PD5 | bidirectional | 5 V-tolerant I/O (FT) with USART2_TX, FMC_NWE and EVENTOUT alternate functions. |+| 120 | VSS | power_in | Ground supply pin. |+| 121 | VDDSDMMC | power_in | Dedicated supply pin for SDMMC2 (clock, command and 4-bit data). |+| 122 | PD6 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_CKIN4, SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, DFSDM1_DATIN1, SDMMC2_CK, FMC_NWAIT, DCMI_D10, LCD_B2 and EVENTOUT alternate functions. |+| 123 | PD7 | bidirectional | 5 V-tolerant I/O (FT) with DFSDM1_DATIN4, SPI1_MOSI/I2S1_SD, DFSDM1_CKIN1, USART2_CK, SPDIF_RX0, SDMMC2_CMD, FMC_NE1 and EVENTOUT alternate functions. |+| 124 | PG9 | bidirectional | 5 V-tolerant I/O (FT) with SPI1_MISO, SPDIF_RX3, USART6_RX, QUADSPI_BK2_IO2, SAI2_FS_B, SDMMC2_D0, FMC_NE2/FMC_NCE, DCMI_VSYNC and EVENTOUT alternate functions. |+| 125 | PG10 | bidirectional | 5 V-tolerant I/O (FT) with SPI1_NSS/I2S1_WS, LCD_G3, SAI2_SD_B, SDMMC2_D1, FMC_NE3, DCMI_D2, LCD_B2 and EVENTOUT alternate functions. |+| 126 | PG11 | bidirectional | 5 V-tolerant I/O (FT) with SPI1_SCK/I2S1_CK, SPDIF_RX0, SDMMC2_D2, ETH_MII_TX_EN/ETH_RMII_TX_EN, DCMI_D3, LCD_B3 and EVENTOUT alternate functions. |+| 127 | PG12 | bidirectional | 5 V-tolerant I/O (FT) with LPTIM1_IN1, SPI6_MISO, SPDIF_RX1, USART6_RTS, LCD_B4, SDMMC2_D3, FMC_NE4, LCD_B1 and EVENTOUT alternate functions. |+| 128 | PG13 | bidirectional | 5 V-tolerant I/O (FT) with TRACED0, LPTIM1_OUT, SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, LCD_R0 and EVENTOUT alternate functions. |+| 129 | PG14 | bidirectional | 5 V-tolerant I/O (FT) with TRACED1, LPTIM1_ETR, SPI6_MOSI, USART6_TX, QUADSPI_BK2_IO3, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, LCD_B0 and EVENTOUT alternate functions. |+| 130 | VSS | power_in | Ground supply pin. |+| 131 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |+| 132 | PG15 | bidirectional | 5 V-tolerant I/O (FT) with USART6_CTS, FMC_SDNCAS, DCMI_D13 and EVENTOUT alternate functions. |+| 133 | PB3(JTDO/TRACESWO) | bidirectional | 5 V-tolerant I/O (FT) that is JTDO/TRACESWO after reset, with TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SPI6_SCK, SDMMC2_D2, CAN3_RX, UART7_RX and EVENTOUT alternate functions. |+| 134 | PB4(NJTRST) | bidirectional | 5 V-tolerant I/O (FT) that is NJTRST after reset, with TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS/I2S2_WS, SPI6_MISO, SDMMC2_D3, CAN3_TX, UART7_TX and EVENTOUT alternate functions. |+| 135 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with UART5_RX, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, SPI6_MOSI, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, LCD_G7 and EVENTOUT alternate functions. |+| 136 | PB6 | bidirectional | 5 V-tolerant I/O (FT) with UART5_TX, TIM4_CH1, HDMI_CEC, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, I2C4_SCL, FMC_SDNE1, DCMI_D5 and EVENTOUT alternate functions. |+| 137 | PB7 | bidirectional | 5 V-tolerant I/O (FT) with TIM4_CH2, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, I2C4_SDA, FMC_NL, DCMI_VSYNC and EVENTOUT alternate functions. |+| 138 | BOOT0 | input | Dedicated boot mode selection pin, also VPP additional function. |+| 139 | PB8 | bidirectional | 5 V-tolerant I/O (FT) with I2C4_SCL, TIM4_CH3, TIM10_CH1, I2C1_SCL, DFSDM1_CKIN7, UART5_RX, CAN1_RX, SDMMC2_D4, ETH_MII_TXD3, SDMMC1_D4, DCMI_D6, LCD_B6 and EVENTOUT alternate functions. |+| 140 | PB9 | bidirectional | 5 V-tolerant I/O (FT) with I2C4_SDA, TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, DFSDM1_DATIN7, UART5_TX, CAN1_TX, SDMMC2_D5, I2C4_SMBA, SDMMC1_D5, DCMI_D7, LCD_B7 and EVENTOUT alternate functions. |+| 141 | PE0 | bidirectional | 5 V-tolerant I/O (FT) with TIM4_ETR, LPTIM1_ETR, UART8_RX, SAI2_MCLK_A, FMC_NBL0, DCMI_D2 and EVENTOUT alternate functions. |+| 142 | PE1 | bidirectional | 5 V-tolerant I/O (FT) with LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3 and EVENTOUT alternate functions. |+| 143 | PDR_ON | input | Power-down reset control pin; tied to VDD for internal reset ON and to VSS for internal reset OFF on LQFP144. |+| 144 | VDD | power_in | Digital supply pin (application supply 1.7 V to 3.6 V). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-144(20x20) |+| Category | Embedded Processors & Controllers |+| Pins | 144 |++## CAD (KiCad official)++- Symbol: `STM32F767ZIT6`+- Footprint: `Package_QFP:LQFP-144_20x20mm_P0.5mm`+- 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)+- 3D model files: `stm32f767zit6-etched.step` / `stm32f767zit6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f767zit6.step` / `stm32f767zit6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182735535095808) (255 pp, sha256 `0520a27f9487edf9`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f767zit6-datasheet.pdf)
page.jsonadded+973@@ -0,0 +1,973 @@+{+ "slug": "stm32f767zit6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-144(20x20). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f767zit6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f767zit6.kicad_sym",+ "stm32f767zit6.kicad_mod",+ "stm32f767zit6.glb",+ "stm32f767zit6.step",+ "stm32f767zit6.lbr",+ "docs/hero.png",+ "docs/stm32f767zit6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F767ZIT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-144(20x20)",+ "pin_count": 144,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182735535095808",+ "parts": {+ "symbol": "stm32f767zit6.kicad_sym",+ "footprint": "stm32f767zit6.kicad_mod",+ "model_3d": "stm32f767zit6-etched.glb",+ "model_3d_plain": "stm32f767zit6.glb",+ "model_3d_step": "stm32f767zit6-etched.step",+ "model_3d_step_plain": "stm32f767zit6.step",+ "lbr": "stm32f767zit6.lbr"+ },+ "distributor_links": {+ "lcsc": "C90235",+ "digikey": "497-16521-ND",+ "mouser": "511-STM32F767ZIT6"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T16:17:41Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-16521-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F767ZIT6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PE2",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, ETH_MII_TXD3, FMC_A23 and EVENTOUT alternate functions."+ },+ {+ "number": "2",+ "name": "PE3",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED0, SAI1_SD_B, FMC_A19 and EVENTOUT alternate functions."+ },+ {+ "number": "3",+ "name": "PE4",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED1, SPI4_NSS, SAI1_FS_A, DFSDM1_DATIN3, FMC_A20, DCMI_D4, LCD_B0 and EVENTOUT alternate functions."+ },+ {+ "number": "4",+ "name": "PE5",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, DFSDM1_CKIN3, FMC_A21, DCMI_D6, LCD_G0 and EVENTOUT alternate functions."+ },+ {+ "number": "5",+ "name": "PE6",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCLK_B, FMC_A22, DCMI_D7, LCD_G1 and EVENTOUT alternate functions."+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup supply pin powering the RTC, 32 backup registers and backup SRAM when VDD is not present."+ },+ {+ "number": "7",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O supplied through the power switch (3 mA sink limit, max 2 MHz with 30 pF load, not a current source), with RTC_TAMP1/RTC_TS/RTC_OUT/WKUP4 additional functions and EVENTOUT."+ },+ {+ "number": "8",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "I/O supplied through the power switch (3 mA sink limit, max 2 MHz with 30 pF load), also the 32 kHz oscillator input (OSC32_IN); 5 V tolerant except in oscillator mode."+ },+ {+ "number": "9",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "I/O supplied through the power switch (3 mA sink limit, max 2 MHz with 30 pF load), also the 32 kHz oscillator output (OSC32_OUT); 5 V tolerant except in oscillator mode."+ },+ {+ "number": "10",+ "name": "PF0",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C2_SDA, FMC_A0 and EVENTOUT alternate functions."+ },+ {+ "number": "11",+ "name": "PF1",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C2_SCL, FMC_A1 and EVENTOUT alternate functions."+ },+ {+ "number": "12",+ "name": "PF2",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C2_SMBA, FMC_A2 and EVENTOUT alternate functions."+ },+ {+ "number": "13",+ "name": "PF3",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A3 and EVENTOUT alternate functions and ADC3_IN9 analog input."+ },+ {+ "number": "14",+ "name": "PF4",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A4 and EVENTOUT alternate functions and ADC3_IN14 analog input."+ },+ {+ "number": "15",+ "name": "PF5",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A5 and EVENTOUT alternate functions and ADC3_IN15 analog input."+ },+ {+ "number": "16",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "17",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "18",+ "name": "PF6",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_RX, QUADSPI_BK1_IO3 and EVENTOUT alternate functions and ADC3_IN4 analog input."+ },+ {+ "number": "19",+ "name": "PF7",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_TX, QUADSPI_BK1_IO2 and EVENTOUT alternate functions and ADC3_IN5 analog input."+ },+ {+ "number": "20",+ "name": "PF8",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SPI5_MISO, SAI1_SCK_B, UART7_RTS, TIM13_CH1, QUADSPI_BK1_IO0 and EVENTOUT alternate functions and ADC3_IN6 analog input."+ },+ {+ "number": "21",+ "name": "PF9",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SPI5_MOSI, SAI1_FS_B, UART7_CTS, TIM14_CH1, QUADSPI_BK1_IO1 and EVENTOUT alternate functions and ADC3_IN7 analog input."+ },+ {+ "number": "22",+ "name": "PF10",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with QUADSPI_CLK, DCMI_D11, LCD_DE and EVENTOUT alternate functions and ADC3_IN8 analog input."+ },+ {+ "number": "23",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "I/O that is also the 4-26 MHz main oscillator input (OSC_IN); 5 V tolerant except in oscillator mode."+ },+ {+ "number": "24",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "I/O that is also the 4-26 MHz main oscillator output (OSC_OUT); 5 V tolerant except in oscillator mode."+ },+ {+ "number": "25",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with weak pull-up resistor."+ },+ {+ "number": "26",+ "name": "PC0",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKIN0, DFSDM1_DATIN4, SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_R5 and EVENTOUT alternate functions and ADC1/2/3_IN10 analog inputs."+ },+ {+ "number": "27",+ "name": "PC1",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED0, DFSDM1_DATIN0, SPI2_MOSI/I2S2_SD, SAI1_SD_A, DFSDM1_CKIN4, ETH_MDC, MDIOS_MDC and EVENTOUT alternate functions and ADC1/2/3_IN11, RTC_TAMP3/WKUP3 additional functions."+ },+ {+ "number": "28",+ "name": "PC2",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKIN1, SPI2_MISO, DFSDM1_CKOUT, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0 and EVENTOUT alternate functions and ADC1/2/3_IN12 analog inputs."+ },+ {+ "number": "29",+ "name": "PC3",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_DATIN1, SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0 and EVENTOUT alternate functions and ADC1/2/3_IN13 analog inputs."+ },+ {+ "number": "30",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "31",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground supply pin."+ },+ {+ "number": "32",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive analog reference voltage input for the ADCs and DACs."+ },+ {+ "number": "33",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply pin (1.7 V to 3.6 V application supply range)."+ },+ {+ "number": "34",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, ETH_MII_CRS and EVENTOUT alternate functions, ADC1/2/3_IN0 and WKUP1; used as internal reset (active low) in regulator OFF/internal reset ON mode."+ },+ {+ "number": "35",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCLK_B, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, LCD_R2 and EVENTOUT alternate functions and ADC1/2/3_IN1 analog inputs."+ },+ {+ "number": "36",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, ETH_MDIO, MDIOS_MDIO, LCD_R1 and EVENTOUT alternate functions, ADC1/2/3_IN2 and WKUP2."+ },+ {+ "number": "37",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, LCD_B2, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5 and EVENTOUT alternate functions and ADC1/2/3_IN3 analog inputs."+ },+ {+ "number": "38",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "39",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "40",+ "name": "PA4",+ "type": "bidirectional",+ "description": "3.3 V-tolerant I/O directly connected to ADC (TTa) with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, SPI6_NSS, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC and EVENTOUT alternate functions, ADC1/2_IN4 and DAC_OUT1."+ },+ {+ "number": "41",+ "name": "PA5",+ "type": "bidirectional",+ "description": "3.3 V-tolerant I/O directly connected to ADC (TTa) with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, SPI6_SCK, OTG_HS_ULPI_CK, LCD_R4 and EVENTOUT alternate functions, ADC1/2_IN5 and DAC_OUT2."+ },+ {+ "number": "42",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, SPI6_MISO, TIM13_CH1, MDIOS_MDC, DCMI_PIXCLK, LCD_G2 and EVENTOUT alternate functions and ADC1/2_IN6 analog inputs."+ },+ {+ "number": "43",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, SPI6_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, FMC_SDNWE and EVENTOUT alternate functions and ADC1/2_IN7 analog inputs."+ },+ {+ "number": "44",+ "name": "PC4",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKIN2, I2S1_MCK, SPDIF_RX2, ETH_MII_RXD0/ETH_RMII_RXD0, FMC_SDNE0 and EVENTOUT alternate functions and ADC1/2_IN14 analog inputs."+ },+ {+ "number": "45",+ "name": "PC5",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_DATIN2, SPDIF_RX3, ETH_MII_RXD1/ETH_RMII_RXD1, FMC_SDCKE0 and EVENTOUT alternate functions and ADC1/2_IN15 analog inputs."+ },+ {+ "number": "46",+ "name": "PB0",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, DFSDM1_CKOUT, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, LCD_G1 and EVENTOUT alternate functions and ADC1/2_IN8 analog inputs."+ },+ {+ "number": "47",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, LCD_G0 and EVENTOUT alternate functions and ADC1/2_IN9 analog inputs."+ },+ {+ "number": "48",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SAI1_SD_A, SPI3_MOSI/I2S3_SD, QUADSPI_CLK, DFSDM1_CKIN1 and EVENTOUT alternate functions."+ },+ {+ "number": "49",+ "name": "PF11",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SPI5_MOSI, SAI2_SD_B, FMC_SDNRAS, DCMI_D12 and EVENTOUT alternate functions."+ },+ {+ "number": "50",+ "name": "PF12",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A6 and EVENTOUT alternate functions."+ },+ {+ "number": "51",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "52",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "53",+ "name": "PF13",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C4_SMBA, DFSDM1_DATIN6, FMC_A7 and EVENTOUT alternate functions."+ },+ {+ "number": "54",+ "name": "PF14",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C4_SCL, DFSDM1_CKIN6, FMC_A8 and EVENTOUT alternate functions."+ },+ {+ "number": "55",+ "name": "PF15",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C4_SDA, FMC_A9 and EVENTOUT alternate functions."+ },+ {+ "number": "56",+ "name": "PG0",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A10 and EVENTOUT alternate functions."+ },+ {+ "number": "57",+ "name": "PG1",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A11 and EVENTOUT alternate functions."+ },+ {+ "number": "58",+ "name": "PE7",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0, FMC_D4 and EVENTOUT alternate functions."+ },+ {+ "number": "59",+ "name": "PE8",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5 and EVENTOUT alternate functions."+ },+ {+ "number": "60",+ "name": "PE9",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6 and EVENTOUT alternate functions."+ },+ {+ "number": "61",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "62",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "63",+ "name": "PE10",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7 and EVENTOUT alternate functions."+ },+ {+ "number": "64",+ "name": "PE11",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH2, SPI4_NSS, DFSDM1_CKIN4, SAI2_SD_B, FMC_D8, LCD_G3 and EVENTOUT alternate functions."+ },+ {+ "number": "65",+ "name": "PE12",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH3N, SPI4_SCK, DFSDM1_DATIN5, SAI2_SCK_B, FMC_D9, LCD_B4 and EVENTOUT alternate functions."+ },+ {+ "number": "66",+ "name": "PE13",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH3, SPI4_MISO, DFSDM1_CKIN5, SAI2_FS_B, FMC_D10, LCD_DE and EVENTOUT alternate functions."+ },+ {+ "number": "67",+ "name": "PE14",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11, LCD_CLK and EVENTOUT alternate functions."+ },+ {+ "number": "68",+ "name": "PE15",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_BKIN, FMC_D12, LCD_R7 and EVENTOUT alternate functions."+ },+ {+ "number": "69",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, QUADSPI_BK1_NCS, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4 and EVENTOUT alternate functions."+ },+ {+ "number": "70",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, DSI_TE, LCD_G5 and EVENTOUT alternate functions."+ },+ {+ "number": "71",+ "name": "VCAP_1",+ "type": "passive",+ "description": "Supply pin for connecting the external capacitor of the internal 1.2 V voltage regulator."+ },+ {+ "number": "72",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "73",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, DFSDM1_DATIN1, USART3_CK, UART5_RX, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID and EVENTOUT alternate functions."+ },+ {+ "number": "74",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH1N, SPI2_SCK/I2S2_CK, DFSDM1_CKIN1, USART3_CTS, UART5_TX, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1 and EVENTOUT alternate functions, plus OTG_HS_VBUS."+ },+ {+ "number": "75",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH2N, TIM8_CH2N, USART1_TX, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS, UART4_RTS, TIM12_CH1, SDMMC2_D0, OTG_HS_DM and EVENTOUT alternate functions."+ },+ {+ "number": "76",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, UART4_CTS, TIM12_CH2, SDMMC2_D1, OTG_HS_DP and EVENTOUT alternate functions."+ },+ {+ "number": "77",+ "name": "PD8",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKIN3, USART3_TX, SPDIF_RX1, FMC_D13 and EVENTOUT alternate functions."+ },+ {+ "number": "78",+ "name": "PD9",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_DATIN3, USART3_RX, FMC_D14 and EVENTOUT alternate functions."+ },+ {+ "number": "79",+ "name": "PD10",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKOUT, USART3_CK, FMC_D15, LCD_B3 and EVENTOUT alternate functions."+ },+ {+ "number": "80",+ "name": "PD11",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A, FMC_A16/FMC_CLE and EVENTOUT alternate functions."+ },+ {+ "number": "81",+ "name": "PD12",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM4_CH1, LPTIM1_IN1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE and EVENTOUT alternate functions."+ },+ {+ "number": "82",+ "name": "PD13",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM4_CH2, LPTIM1_OUT, I2C4_SDA, QUADSPI_BK1_IO3, SAI2_SCK_A, FMC_A18 and EVENTOUT alternate functions."+ },+ {+ "number": "83",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "84",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "85",+ "name": "PD14",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM4_CH3, UART8_CTS, FMC_D0 and EVENTOUT alternate functions."+ },+ {+ "number": "86",+ "name": "PD15",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM4_CH4, UART8_RTS, FMC_D1 and EVENTOUT alternate functions."+ },+ {+ "number": "87",+ "name": "PG2",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A12 and EVENTOUT alternate functions."+ },+ {+ "number": "88",+ "name": "PG3",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A13 and EVENTOUT alternate functions."+ },+ {+ "number": "89",+ "name": "PG4",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A14/FMC_BA0 and EVENTOUT alternate functions."+ },+ {+ "number": "90",+ "name": "PG5",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_A15/FMC_BA1 and EVENTOUT alternate functions."+ },+ {+ "number": "91",+ "name": "PG6",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with FMC_NE3, DCMI_D12, LCD_R7 and EVENTOUT alternate functions."+ },+ {+ "number": "92",+ "name": "PG7",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SAI1_MCLK_A, USART6_CK, FMC_INT, DCMI_D13, LCD_CLK and EVENTOUT alternate functions."+ },+ {+ "number": "93",+ "name": "PG8",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SPI6_NSS, SPDIF_RX2, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, LCD_G7 and EVENTOUT alternate functions."+ },+ {+ "number": "94",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "95",+ "name": "VDDUSB",+ "type": "power_in",+ "description": "Dedicated supply pin for the USB OTG_FS and OTG_HS interfaces."+ },+ {+ "number": "96",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM3_CH1, TIM8_CH1, I2S2_MCK, DFSDM1_CKIN3, USART6_TX, FMC_NWAIT, SDMMC2_D6, SDMMC1_D6, DCMI_D0, LCD_HSYNC and EVENTOUT alternate functions."+ },+ {+ "number": "97",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM3_CH2, TIM8_CH2, I2S3_MCK, DFSDM1_DATIN3, USART6_RX, FMC_NE1, SDMMC2_D7, SDMMC1_D7, DCMI_D1, LCD_G6 and EVENTOUT alternate functions."+ },+ {+ "number": "98",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, FMC_NE2/FMC_NCE, SDMMC1_D0, DCMI_D2 and EVENTOUT alternate functions."+ },+ {+ "number": "99",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, LCD_G3, SDMMC1_D1, DCMI_D3, LCD_B2 and EVENTOUT alternate functions."+ },+ {+ "number": "100",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, CAN3_RX, UART7_RX, LCD_B3, LCD_R6 and EVENTOUT alternate functions."+ },+ {+ "number": "101",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0, LCD_R5 and EVENTOUT alternate functions, plus OTG_FS_VBUS."+ },+ {+ "number": "102",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH3, USART1_RX, LCD_B4, OTG_FS_ID, MDIOS_MDIO, DCMI_D1, LCD_B1 and EVENTOUT alternate functions."+ },+ {+ "number": "103",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_CH4, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, CAN1_RX, OTG_FS_DM, LCD_R4 and EVENTOUT alternate functions."+ },+ {+ "number": "104",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM1_ETR, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, LCD_R5 and EVENTOUT alternate functions."+ },+ {+ "number": "105",+ "name": "PA13(JTMS-SWDIO)",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) that is JTMS-SWDIO after reset, with EVENTOUT alternate function."+ },+ {+ "number": "106",+ "name": "VCAP_2",+ "type": "passive",+ "description": "Supply pin for connecting the external capacitor of the internal 1.2 V voltage regulator."+ },+ {+ "number": "107",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "108",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "109",+ "name": "PA14(JTCK-SWCLK)",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) that is JTCK-SWCLK after reset, with EVENTOUT alternate function."+ },+ {+ "number": "110",+ "name": "PA15(JTDI)",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) that is JTDI after reset, with TIM2_CH1/ETR, HDMI_CEC, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, SPI6_NSS, UART4_RTS, CAN3_TX, UART7_TX and EVENTOUT alternate functions."+ },+ {+ "number": "111",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, DCMI_D8, LCD_R2 and EVENTOUT alternate functions."+ },+ {+ "number": "112",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_DATIN5, SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, DCMI_D4 and EVENTOUT alternate functions."+ },+ {+ "number": "113",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9 and EVENTOUT alternate functions."+ },+ {+ "number": "114",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKIN6, DFSDM1_DATIN7, UART4_RX, CAN1_RX, FMC_D2 and EVENTOUT alternate functions."+ },+ {+ "number": "115",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_DATIN6, DFSDM1_CKIN7, UART4_TX, CAN1_TX, FMC_D3 and EVENTOUT alternate functions."+ },+ {+ "number": "116",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, DCMI_D11 and EVENTOUT alternate functions."+ },+ {+ "number": "117",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, DFSDM1_DATIN0, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7 and EVENTOUT alternate functions."+ },+ {+ "number": "118",+ "name": "PD4",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKIN0, USART2_RTS, FMC_NOE and EVENTOUT alternate functions."+ },+ {+ "number": "119",+ "name": "PD5",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with USART2_TX, FMC_NWE and EVENTOUT alternate functions."+ },+ {+ "number": "120",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "121",+ "name": "VDDSDMMC",+ "type": "power_in",+ "description": "Dedicated supply pin for SDMMC2 (clock, command and 4-bit data)."+ },+ {+ "number": "122",+ "name": "PD6",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_CKIN4, SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, DFSDM1_DATIN1, SDMMC2_CK, FMC_NWAIT, DCMI_D10, LCD_B2 and EVENTOUT alternate functions."+ },+ {+ "number": "123",+ "name": "PD7",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with DFSDM1_DATIN4, SPI1_MOSI/I2S1_SD, DFSDM1_CKIN1, USART2_CK, SPDIF_RX0, SDMMC2_CMD, FMC_NE1 and EVENTOUT alternate functions."+ },+ {+ "number": "124",+ "name": "PG9",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SPI1_MISO, SPDIF_RX3, USART6_RX, QUADSPI_BK2_IO2, SAI2_FS_B, SDMMC2_D0, FMC_NE2/FMC_NCE, DCMI_VSYNC and EVENTOUT alternate functions."+ },+ {+ "number": "125",+ "name": "PG10",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SPI1_NSS/I2S1_WS, LCD_G3, SAI2_SD_B, SDMMC2_D1, FMC_NE3, DCMI_D2, LCD_B2 and EVENTOUT alternate functions."+ },+ {+ "number": "126",+ "name": "PG11",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with SPI1_SCK/I2S1_CK, SPDIF_RX0, SDMMC2_D2, ETH_MII_TX_EN/ETH_RMII_TX_EN, DCMI_D3, LCD_B3 and EVENTOUT alternate functions."+ },+ {+ "number": "127",+ "name": "PG12",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with LPTIM1_IN1, SPI6_MISO, SPDIF_RX1, USART6_RTS, LCD_B4, SDMMC2_D3, FMC_NE4, LCD_B1 and EVENTOUT alternate functions."+ },+ {+ "number": "128",+ "name": "PG13",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED0, LPTIM1_OUT, SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, LCD_R0 and EVENTOUT alternate functions."+ },+ {+ "number": "129",+ "name": "PG14",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TRACED1, LPTIM1_ETR, SPI6_MOSI, USART6_TX, QUADSPI_BK2_IO3, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, LCD_B0 and EVENTOUT alternate functions."+ },+ {+ "number": "130",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply pin."+ },+ {+ "number": "131",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ },+ {+ "number": "132",+ "name": "PG15",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with USART6_CTS, FMC_SDNCAS, DCMI_D13 and EVENTOUT alternate functions."+ },+ {+ "number": "133",+ "name": "PB3(JTDO/TRACESWO)",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) that is JTDO/TRACESWO after reset, with TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SPI6_SCK, SDMMC2_D2, CAN3_RX, UART7_RX and EVENTOUT alternate functions."+ },+ {+ "number": "134",+ "name": "PB4(NJTRST)",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) that is NJTRST after reset, with TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS/I2S2_WS, SPI6_MISO, SDMMC2_D3, CAN3_TX, UART7_TX and EVENTOUT alternate functions."+ },+ {+ "number": "135",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with UART5_RX, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, SPI6_MOSI, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, LCD_G7 and EVENTOUT alternate functions."+ },+ {+ "number": "136",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with UART5_TX, TIM4_CH1, HDMI_CEC, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, I2C4_SCL, FMC_SDNE1, DCMI_D5 and EVENTOUT alternate functions."+ },+ {+ "number": "137",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM4_CH2, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, I2C4_SDA, FMC_NL, DCMI_VSYNC and EVENTOUT alternate functions."+ },+ {+ "number": "138",+ "name": "BOOT0",+ "type": "input",+ "description": "Dedicated boot mode selection pin, also VPP additional function."+ },+ {+ "number": "139",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C4_SCL, TIM4_CH3, TIM10_CH1, I2C1_SCL, DFSDM1_CKIN7, UART5_RX, CAN1_RX, SDMMC2_D4, ETH_MII_TXD3, SDMMC1_D4, DCMI_D6, LCD_B6 and EVENTOUT alternate functions."+ },+ {+ "number": "140",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with I2C4_SDA, TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, DFSDM1_DATIN7, UART5_TX, CAN1_TX, SDMMC2_D5, I2C4_SMBA, SDMMC1_D5, DCMI_D7, LCD_B7 and EVENTOUT alternate functions."+ },+ {+ "number": "141",+ "name": "PE0",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with TIM4_ETR, LPTIM1_ETR, UART8_RX, SAI2_MCLK_A, FMC_NBL0, DCMI_D2 and EVENTOUT alternate functions."+ },+ {+ "number": "142",+ "name": "PE1",+ "type": "bidirectional",+ "description": "5 V-tolerant I/O (FT) with LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3 and EVENTOUT alternate functions."+ },+ {+ "number": "143",+ "name": "PDR_ON",+ "type": "input",+ "description": "Power-down reset control pin; tied to VDD for internal reset ON and to VSS for internal reset OFF on LQFP144."+ },+ {+ "number": "144",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply pin (application supply 1.7 V to 3.6 V)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: LQFP144 package uses standard LQFP pinout numbering 1-144. Some pins marked as 'not connected' in do; Pins 6, 71, 107 (VBAT, VCAP_1, VCAP_2) and supply pins (VDD, VSS, VDDUSB, VDDSDMMC) require proper d; Oscillator pins (PH0-OSC_IN at pin 129, PH1-OSC_OUT at pin 130, PC14-OSC32_IN at pin 9, PC15-OSC32_O"+ ],+ "pages_sent": 102,+ "cost_usd": 0.9114,+ "at": "2026-10-01T16:17:00"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182735535095808",+ "pages": 255,+ "sha256": "0520a27f9487edf9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 144,+ "described": 144,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}