component
STM32F750V8T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+136@@ -0,0 +1,136 @@+# STM32F750V8T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32F750V8T6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | GPIO port E pin 2; alternate functions: TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, ETH_MII_TXD3, FMC_A23, EVENTOUT. |+| 2 | PE3 | bidirectional | GPIO port E pin 3; alternate functions: TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT. |+| 3 | PE4 | bidirectional | GPIO port E pin 4; alternate functions: TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0, EVENTOUT. |+| 4 | PE5 | bidirectional | GPIO port E pin 5; alternate functions: TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0, EVENTOUT. |+| 5 | PE6 | bidirectional | GPIO port E pin 6; alternate functions: TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCK_B, FMC_A22, DCMI_D7, LCD_G1, EVENTOUT. |+| 6 | VBAT | power_in | Backup battery supply voltage (1.65 V to 3.6 V) for RTC, backup registers, and backup SRAM in low-power modes. |+| 7 | PC13 | bidirectional | GPIO port C pin 13 (anti-tamper); alternate functions: EVENTOUT, RTC_TAMP1, RTC_TS, RTC_OUT, wakeup source 4 with 3 mA max sink current. |+| 8 | PC14 | bidirectional | GPIO port C pin 14 (OSC32_IN); alternate functions: EVENTOUT, OSC32_IN for 32 kHz oscillator input with 3 mA max sink current. |+| 9 | PC15 | bidirectional | GPIO port C pin 15 (OSC32_OUT); alternate functions: EVENTOUT, OSC32_OUT for 32 kHz oscillator output with 3 mA max sink current. |+| 10 | VSS | power_in | Ground (reference potential 0 V). |+| 11 | VDD | power_in | Main power supply (1.7 V to 3.6 V) for digital core and I/O logic. |+| 12 | PH0 | bidirectional | GPIO port H pin 0 (OSC_IN); alternate functions: EVENTOUT, OSC_IN for 4-26 MHz crystal oscillator; not 5V tolerant in oscillator mode. |+| 13 | PH1 | bidirectional | GPIO port H pin 1 (OSC_OUT); alternate functions: EVENTOUT, OSC_OUT for crystal oscillator; not 5V tolerant in oscillator mode. |+| 14 | NRST | bidirectional | Active-low reset input/output with internal weak pull-up (Schmitt trigger input); can be driven externally or by chip reset controller. |+| 15 | PC0 | bidirectional | GPIO port C pin 0; alternate functions: SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_R5, EVENTOUT; ADC123 channel 10. |+| 16 | PC1 | bidirectional | GPIO port C pin 1; alternate functions: TRACED0, SPI2_MOSI, SAI1_SD_A, ETH_MDC, EVENTOUT; ADC123 channel 11, RTC_TAMP3, wakeup source 3. |+| 17 | PC2 | bidirectional | GPIO port C pin 2; alternate functions: SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT; ADC123 channel 12. |+| 18 | PC3 | bidirectional | GPIO port C pin 3; alternate functions: SPI2_MOSI, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT; ADC123 channel 13. |+| 19 | VSSA | power_in | Ground reference for analog circuits and ADC/DAC (1.65 V to 3.6 V range). |+| 20 | VREF+ | power_in | Positive reference voltage for ADC (1.65 V to 3.6 V, typically VDDA); requires low-impedance decoupling capacitor. |+| 21 | VDDA | power_in | Analog power supply (1.65 V to 3.6 V) for ADC, DAC, comparators, and PLL; requires decoupling capacitor. |+| 22 | PA0 | bidirectional | GPIO port A pin 0 (WKUP); alternate functions: TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, ETH_MII_CRS, EVENTOUT; ADC123 channel 0, wakeup source 1. |+| 23 | PA1 | bidirectional | GPIO port A pin 1; alternate functions: TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCK_B, ETH_MII_RX_CLK, LCD_R2, EVENTOUT; ADC123 channel 1. |+| 24 | PA2 | bidirectional | GPIO port A pin 2; alternate functions: TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, ETH_MDIO, LCD_R1, EVENTOUT; ADC123 channel 2, wakeup source 2. |+| 25 | PA3 | bidirectional | GPIO port A pin 3; alternate functions: TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT; ADC123 channel 3. |+| 26 | VSS | power_in | Ground (reference potential 0 V). |+| 27 | VDD | power_in | Main power supply (1.7 V to 3.6 V) for digital core and I/O logic. |+| 28 | PA4 | bidirectional | GPIO port A pin 4 (TTL input); alternate functions: SPI1_NSS, SPI3_NSS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT; ADC12 channel 4, DAC output 1. |+| 29 | PA5 | bidirectional | GPIO port A pin 5 (TTL input); alternate functions: TIM2_CH1, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, LCD_R4, EVENTOUT; ADC12 channel 5, DAC output 2. |+| 30 | PA6 | bidirectional | GPIO port A pin 6; alternate functions: TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT; ADC12 channel 6. |+| 31 | PA7 | bidirectional | GPIO port A pin 7; alternate functions: TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV, FMC_SDNWE, EVENTOUT; ADC12 channel 7. |+| 32 | PC4 | bidirectional | GPIO port C pin 4; alternate functions: I2S1_MCK, SPDIFRX_IN2, ETH_MII_RXD0, FMC_SDNE0, EVENTOUT; ADC12 channel 14. |+| 33 | PC5 | bidirectional | GPIO port C pin 5; alternate functions: SPDIFRX_IN3, ETH_MII_RXD1, FMC_SDCKE0, EVENTOUT; ADC12 channel 15. |+| 34 | PB0 | bidirectional | GPIO port B pin 0; alternate functions: TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT; ADC12 channel 8. |+| 35 | PB1 | bidirectional | GPIO port B pin 1; alternate functions: TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT; ADC12 channel 9. |+| 36 | PB2 | bidirectional | GPIO port B pin 2; alternate functions: SAI1_SD_A, SPI3_MOSI, QUADSPI_CLK, EVENTOUT. |+| 37 | PE7 | bidirectional | GPIO port E pin 7; alternate functions: TIM1_ETR, UART7_RX, QUADSPI_BK2_IO0, FMC_D4, EVENTOUT. |+| 38 | PE8 | bidirectional | GPIO port E pin 8; alternate functions: TIM1_CH1N, UART7_TX, QUADSPI_BK2_IO1, FMC_D5, EVENTOUT. |+| 39 | PE9 | bidirectional | GPIO port E pin 9; alternate functions: TIM1_CH1, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6, EVENTOUT. |+| 40 | PE10 | bidirectional | GPIO port E pin 10; alternate functions: TIM1_CH2N, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7, EVENTOUT. |+| 41 | PE11 | bidirectional | GPIO port E pin 11; alternate functions: TIM1_CH2, SPI4_NSS, SAI2_SD_B, FMC_D8, LCD_G3, EVENTOUT. |+| 42 | PE12 | bidirectional | GPIO port E pin 12; alternate functions: TIM1_CH3N, SPI4_SCK, SAI2_SCK_B, FMC_D9, LCD_B4, EVENTOUT. |+| 43 | PE13 | bidirectional | GPIO port E pin 13; alternate functions: TIM1_CH3, SPI4_MISO, SAI2_FS_B, FMC_D10, LCD_DE, EVENTOUT. |+| 44 | PE14 | bidirectional | GPIO port E pin 14; alternate functions: TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11, LCD_CLK, EVENTOUT. |+| 45 | PE15 | bidirectional | GPIO port E pin 15; alternate functions: TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT. |+| 46 | PB10 | bidirectional | GPIO port B pin 10; alternate functions: TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT. |+| 47 | PB11 | bidirectional | GPIO port B pin 11; alternate functions: TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN, LCD_G5, EVENTOUT. |+| 48 | VCAP1 | passive | Capacitor decoupling pin for internal voltage regulator (1.0 V supply); connect to external capacitor (typically 2.2 µF or 10 µF). |+| 49 | VSS | power_in | Ground (reference potential 0 V). |+| 50 | VDD | power_in | Main power supply (1.7 V to 3.6 V) for digital core and I/O logic. |+| 51 | PB12 | bidirectional | GPIO port B pin 12; alternate functions: TIM1_BKIN, I2C2_SMBA, SPI2_NSS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT. |+| 52 | PB13 | bidirectional | GPIO port B pin 13; alternate functions: TIM1_CH1N, SPI2_SCK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1, EVENTOUT; OTG_HS_VBUS available. |+| 53 | PB14 | bidirectional | GPIO port B pin 14; alternate functions: TIM1_CH2N, TIM8_CH2N, SPI2_MISO, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT. |+| 54 | PB15 | bidirectional | GPIO port B pin 15; alternate functions: RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, TIM12_CH2, OTG_HS_DP, EVENTOUT. |+| 55 | PD8 | bidirectional | GPIO port D pin 8; alternate functions: USART3_TX, SPDIFRX_IN11, FMC_D13, EVENTOUT. |+| 56 | PD9 | bidirectional | GPIO port D pin 9; alternate functions: USART3_RX, FMC_D14, EVENTOUT. |+| 57 | PD10 | bidirectional | GPIO port D pin 10; alternate functions: USART3_CK, FMC_D15, LCD_B3, EVENTOUT. |+| 58 | PD11 | bidirectional | GPIO port D pin 11; alternate functions: I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A, FMC_A16/CLE, EVENTOUT. |+| 59 | PD12 | bidirectional | GPIO port D pin 12; alternate functions: TIM4_CH1, LPTIM1_IN1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1, SAI2_FS_A, FMC_A17/ALE, EVENTOUT. |+| 60 | PD13 | bidirectional | GPIO port D pin 13; alternate functions: TIM4_CH2, LPTIM1_OUT, I2C4_SDA, QUADSPI_BK1_IO3, SAI2_SCK_A, FMC_A18, EVENTOUT. |+| 61 | PD14 | bidirectional | GPIO port D pin 14; alternate functions: TIM4_CH3, UART8_CTS, FMC_D0, EVENTOUT. |+| 62 | PD15 | bidirectional | GPIO port D pin 15; alternate functions: TIM4_CH4, UART8_RTS, FMC_D1, EVENTOUT. |+| 63 | PC6 | bidirectional | GPIO port C pin 6; alternate functions: TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDMMC1_D6, DCMI_D0, LCD_HSYNC, EVENTOUT. |+| 64 | PC7 | bidirectional | GPIO port C pin 7; alternate functions: TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC1_D7, DCMI_D1, LCD_G6, EVENTOUT. |+| 65 | PC8 | bidirectional | GPIO port C pin 8; alternate functions: TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, SDMMC1_D0, DCMI_D2, EVENTOUT. |+| 66 | PC9 | bidirectional | GPIO port C pin 9; alternate functions: MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, SDMMC1_D1, DCMI_D3, EVENTOUT. |+| 67 | PA8 | bidirectional | GPIO port A pin 8; alternate functions: MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT. |+| 68 | PA9 | bidirectional | GPIO port A pin 9; alternate functions: TIM1_CH2, I2C3_SMBA, SPI2_SCK, USART1_TX, DCMI_D0, EVENTOUT; OTG_FS_VBUS available. |+| 69 | PA10 | bidirectional | GPIO port A pin 10; alternate functions: TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1, EVENTOUT. |+| 70 | PA11 | bidirectional | GPIO port A pin 11; alternate functions: TIM1_CH4, USART1_CTS, CAN1_RX, OTG_FS_DM, LCD_R4, EVENTOUT. |+| 71 | PA12 | bidirectional | GPIO port A pin 12; alternate functions: TIM1_ETR, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, LCD_R5, EVENTOUT. |+| 72 | PA13 | bidirectional | GPIO port A pin 13 (JTMS-SWDIO); alternate functions: JTMS-SWDIO, EVENTOUT; dedicated JTAG/SWD debug port pin. |+| 73 | VCAP2 | passive | Capacitor decoupling pin for internal voltage regulator (1.0 V supply); connect to external capacitor (typically 2.2 µF or 10 µF). |+| 74 | VSS | power_in | Ground (reference potential 0 V). |+| 75 | VDD | power_in | Main power supply (1.7 V to 3.6 V) for digital core and I/O logic. |+| 76 | PA14 | bidirectional | GPIO port A pin 14 (JTCK-SWCLK); alternate functions: JTCK-SWCLK, EVENTOUT; dedicated JTAG/SWD debug port pin. |+| 77 | PA15 | bidirectional | GPIO port A pin 15 (JTDI); alternate functions: JTDI, TIM2_CH1, HDMI-CEC, SPI1_NSS, SPI3_NSS, UART4_RTS, EVENTOUT; JTAG debug pin. |+| 78 | PC10 | bidirectional | GPIO port C pin 10; alternate functions: SPI3_SCK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, DCMI_D8, LCD_R2, EVENTOUT. |+| 79 | PC11 | bidirectional | GPIO port C pin 11; alternate functions: SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, DCMI_D4, EVENTOUT. |+| 80 | PC12 | bidirectional | GPIO port C pin 12; alternate functions: TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9, EVENTOUT. |+| 81 | PD0 | bidirectional | GPIO port D pin 0; alternate functions: CAN1_RX, FMC_D2, EVENTOUT. |+| 82 | PD1 | bidirectional | GPIO port D pin 1; alternate functions: CAN1_TX, FMC_D3, EVENTOUT. |+| 83 | PD2 | bidirectional | GPIO port D pin 2; alternate functions: TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, DCMI_D11, EVENTOUT. |+| 84 | PD3 | bidirectional | GPIO port D pin 3; alternate functions: SPI2_SCK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, EVENTOUT. |+| 85 | PD4 | bidirectional | GPIO port D pin 4; alternate functions: USART2_RTS, FMC_NOE, EVENTOUT. |+| 86 | PD5 | bidirectional | GPIO port D pin 5; alternate functions: USART2_TX, FMC_NWE, EVENTOUT. |+| 87 | PD6 | bidirectional | GPIO port D pin 6; alternate functions: SPI3_MOSI, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2, EVENTOUT. |+| 88 | PD7 | bidirectional | GPIO port D pin 7; alternate functions: USART2_CK, SPDIFRX_IN0, FMC_NE1, EVENTOUT. |+| 89 | PB3 | bidirectional | GPIO port B pin 3 (JTDO/TRACESWO); alternate functions: JTDO/TRACESWO, TIM2_CH2, SPI1_SCK, SPI3_SCK, EVENTOUT; JTAG debug pin. |+| 90 | PB4 | bidirectional | GPIO port B pin 4 (NJTRST); alternate functions: NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS, EVENTOUT; JTAG debug pin. |+| 91 | PB5 | bidirectional | GPIO port B pin 5; alternate functions: TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, EVENTOUT. |+| 92 | PB6 | bidirectional | GPIO port B pin 6; alternate functions: TIM4_CH1, HDMI-CEC, I2C1_SCL, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, FMC_SDNE1, DCMI_D5, EVENTOUT. |+| 93 | PB7 | bidirectional | GPIO port B pin 7; alternate functions: TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC, EVENTOUT. |+| 94 | BOOT0 | input | Boot mode selection pin (pull to VDD for boot from memory, leave floating or ground for boot from flash); sampled during reset. |+| 95 | PB8 | bidirectional | GPIO port B pin 8; alternate functions: TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDMMC1_D4, DCMI_D6, LCD_B6, EVENTOUT. |+| 96 | PB9 | bidirectional | GPIO port B pin 9; alternate functions: TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS, CAN1_TX, SDMMC1_D5, DCMI_D7, LCD_B7, EVENTOUT. |+| 97 | PE0 | bidirectional | GPIO port E pin 0; alternate functions: TIM4_ETR, LPTIM1_ETR, UART8_RX, SAI2_MCK_A, FMC_NBL0, DCMI_D2, EVENTOUT. |+| 98 | PE1 | bidirectional | GPIO port E pin 1; alternate functions: LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3, EVENTOUT. |+| 99 | VSS | power_in | Ground (reference potential 0 V). |+| 100 | VDD | power_in | Main power supply (1.7 V to 3.6 V) for digital core and I/O logic. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32F750V8T6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32f750v8t6-etched.step` / `stm32f750v8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f750v8t6.step` / `stm32f750v8t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039601994776576) (199 pp, sha256 `b2a69a47a26f41f0`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f750v8t6-datasheet.pdf)
page.jsonadded+751@@ -0,0 +1,751 @@+{+ "slug": "stm32f750v8t6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f750v8t6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f750v8t6.kicad_sym",+ "stm32f750v8t6.kicad_mod",+ "stm32f750v8t6.glb",+ "stm32f750v8t6.step",+ "stm32f750v8t6.lbr",+ "docs/hero.png",+ "docs/stm32f750v8t6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32f750v8t6-hero.glb",+ "stm32f750v8t6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32F750V8T6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-100(14x14)",+ "pin_count": 100,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039601994776576",+ "parts": {+ "symbol": "stm32f750v8t6.kicad_sym",+ "footprint": "stm32f750v8t6.kicad_mod",+ "model_3d": "stm32f750v8t6-hero.glb",+ "model_3d_plain": "stm32f750v8t6.glb",+ "model_3d_step": "stm32f750v8t6-etched.step",+ "model_3d_step_plain": "stm32f750v8t6.step",+ "lbr": "stm32f750v8t6.lbr"+ },+ "distributor_links": {+ "lcsc": "C529327",+ "digikey": "497-18107-ND",+ "mouser": "511-STM32F750V8T6"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T07:46:27Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-18107-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F750V8T6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PE2",+ "type": "bidirectional",+ "description": "GPIO port E pin 2; alternate functions: TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, ETH_MII_TXD3, FMC_A23, EVENTOUT."+ },+ {+ "number": "2",+ "name": "PE3",+ "type": "bidirectional",+ "description": "GPIO port E pin 3; alternate functions: TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT."+ },+ {+ "number": "3",+ "name": "PE4",+ "type": "bidirectional",+ "description": "GPIO port E pin 4; alternate functions: TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0, EVENTOUT."+ },+ {+ "number": "4",+ "name": "PE5",+ "type": "bidirectional",+ "description": "GPIO port E pin 5; alternate functions: TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0, EVENTOUT."+ },+ {+ "number": "5",+ "name": "PE6",+ "type": "bidirectional",+ "description": "GPIO port E pin 6; alternate functions: TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCK_B, FMC_A22, DCMI_D7, LCD_G1, EVENTOUT."+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery supply voltage (1.65 V to 3.6 V) for RTC, backup registers, and backup SRAM in low-power modes."+ },+ {+ "number": "7",+ "name": "PC13",+ "type": "bidirectional",+ "description": "GPIO port C pin 13 (anti-tamper); alternate functions: EVENTOUT, RTC_TAMP1, RTC_TS, RTC_OUT, wakeup source 4 with 3 mA max sink current."+ },+ {+ "number": "8",+ "name": "PC14",+ "type": "bidirectional",+ "description": "GPIO port C pin 14 (OSC32_IN); alternate functions: EVENTOUT, OSC32_IN for 32 kHz oscillator input with 3 mA max sink current."+ },+ {+ "number": "9",+ "name": "PC15",+ "type": "bidirectional",+ "description": "GPIO port C pin 15 (OSC32_OUT); alternate functions: EVENTOUT, OSC32_OUT for 32 kHz oscillator output with 3 mA max sink current."+ },+ {+ "number": "10",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (reference potential 0 V)."+ },+ {+ "number": "11",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply (1.7 V to 3.6 V) for digital core and I/O logic."+ },+ {+ "number": "12",+ "name": "PH0",+ "type": "bidirectional",+ "description": "GPIO port H pin 0 (OSC_IN); alternate functions: EVENTOUT, OSC_IN for 4-26 MHz crystal oscillator; not 5V tolerant in oscillator mode."+ },+ {+ "number": "13",+ "name": "PH1",+ "type": "bidirectional",+ "description": "GPIO port H pin 1 (OSC_OUT); alternate functions: EVENTOUT, OSC_OUT for crystal oscillator; not 5V tolerant in oscillator mode."+ },+ {+ "number": "14",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active-low reset input/output with internal weak pull-up (Schmitt trigger input); can be driven externally or by chip reset controller."+ },+ {+ "number": "15",+ "name": "PC0",+ "type": "bidirectional",+ "description": "GPIO port C pin 0; alternate functions: SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_R5, EVENTOUT; ADC123 channel 10."+ },+ {+ "number": "16",+ "name": "PC1",+ "type": "bidirectional",+ "description": "GPIO port C pin 1; alternate functions: TRACED0, SPI2_MOSI, SAI1_SD_A, ETH_MDC, EVENTOUT; ADC123 channel 11, RTC_TAMP3, wakeup source 3."+ },+ {+ "number": "17",+ "name": "PC2",+ "type": "bidirectional",+ "description": "GPIO port C pin 2; alternate functions: SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT; ADC123 channel 12."+ },+ {+ "number": "18",+ "name": "PC3",+ "type": "bidirectional",+ "description": "GPIO port C pin 3; alternate functions: SPI2_MOSI, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT; ADC123 channel 13."+ },+ {+ "number": "19",+ "name": "VSSA",+ "type": "power_in",+ "description": "Ground reference for analog circuits and ADC/DAC (1.65 V to 3.6 V range)."+ },+ {+ "number": "20",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive reference voltage for ADC (1.65 V to 3.6 V, typically VDDA); requires low-impedance decoupling capacitor."+ },+ {+ "number": "21",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply (1.65 V to 3.6 V) for ADC, DAC, comparators, and PLL; requires decoupling capacitor."+ },+ {+ "number": "22",+ "name": "PA0",+ "type": "bidirectional",+ "description": "GPIO port A pin 0 (WKUP); alternate functions: TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, ETH_MII_CRS, EVENTOUT; ADC123 channel 0, wakeup source 1."+ },+ {+ "number": "23",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO port A pin 1; alternate functions: TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCK_B, ETH_MII_RX_CLK, LCD_R2, EVENTOUT; ADC123 channel 1."+ },+ {+ "number": "24",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO port A pin 2; alternate functions: TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, ETH_MDIO, LCD_R1, EVENTOUT; ADC123 channel 2, wakeup source 2."+ },+ {+ "number": "25",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO port A pin 3; alternate functions: TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT; ADC123 channel 3."+ },+ {+ "number": "26",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (reference potential 0 V)."+ },+ {+ "number": "27",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply (1.7 V to 3.6 V) for digital core and I/O logic."+ },+ {+ "number": "28",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO port A pin 4 (TTL input); alternate functions: SPI1_NSS, SPI3_NSS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT; ADC12 channel 4, DAC output 1."+ },+ {+ "number": "29",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO port A pin 5 (TTL input); alternate functions: TIM2_CH1, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, LCD_R4, EVENTOUT; ADC12 channel 5, DAC output 2."+ },+ {+ "number": "30",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO port A pin 6; alternate functions: TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT; ADC12 channel 6."+ },+ {+ "number": "31",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO port A pin 7; alternate functions: TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV, FMC_SDNWE, EVENTOUT; ADC12 channel 7."+ },+ {+ "number": "32",+ "name": "PC4",+ "type": "bidirectional",+ "description": "GPIO port C pin 4; alternate functions: I2S1_MCK, SPDIFRX_IN2, ETH_MII_RXD0, FMC_SDNE0, EVENTOUT; ADC12 channel 14."+ },+ {+ "number": "33",+ "name": "PC5",+ "type": "bidirectional",+ "description": "GPIO port C pin 5; alternate functions: SPDIFRX_IN3, ETH_MII_RXD1, FMC_SDCKE0, EVENTOUT; ADC12 channel 15."+ },+ {+ "number": "34",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO port B pin 0; alternate functions: TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT; ADC12 channel 8."+ },+ {+ "number": "35",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO port B pin 1; alternate functions: TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT; ADC12 channel 9."+ },+ {+ "number": "36",+ "name": "PB2",+ "type": "bidirectional",+ "description": "GPIO port B pin 2; alternate functions: SAI1_SD_A, SPI3_MOSI, QUADSPI_CLK, EVENTOUT."+ },+ {+ "number": "37",+ "name": "PE7",+ "type": "bidirectional",+ "description": "GPIO port E pin 7; alternate functions: TIM1_ETR, UART7_RX, QUADSPI_BK2_IO0, FMC_D4, EVENTOUT."+ },+ {+ "number": "38",+ "name": "PE8",+ "type": "bidirectional",+ "description": "GPIO port E pin 8; alternate functions: TIM1_CH1N, UART7_TX, QUADSPI_BK2_IO1, FMC_D5, EVENTOUT."+ },+ {+ "number": "39",+ "name": "PE9",+ "type": "bidirectional",+ "description": "GPIO port E pin 9; alternate functions: TIM1_CH1, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6, EVENTOUT."+ },+ {+ "number": "40",+ "name": "PE10",+ "type": "bidirectional",+ "description": "GPIO port E pin 10; alternate functions: TIM1_CH2N, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7, EVENTOUT."+ },+ {+ "number": "41",+ "name": "PE11",+ "type": "bidirectional",+ "description": "GPIO port E pin 11; alternate functions: TIM1_CH2, SPI4_NSS, SAI2_SD_B, FMC_D8, LCD_G3, EVENTOUT."+ },+ {+ "number": "42",+ "name": "PE12",+ "type": "bidirectional",+ "description": "GPIO port E pin 12; alternate functions: TIM1_CH3N, SPI4_SCK, SAI2_SCK_B, FMC_D9, LCD_B4, EVENTOUT."+ },+ {+ "number": "43",+ "name": "PE13",+ "type": "bidirectional",+ "description": "GPIO port E pin 13; alternate functions: TIM1_CH3, SPI4_MISO, SAI2_FS_B, FMC_D10, LCD_DE, EVENTOUT."+ },+ {+ "number": "44",+ "name": "PE14",+ "type": "bidirectional",+ "description": "GPIO port E pin 14; alternate functions: TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11, LCD_CLK, EVENTOUT."+ },+ {+ "number": "45",+ "name": "PE15",+ "type": "bidirectional",+ "description": "GPIO port E pin 15; alternate functions: TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT."+ },+ {+ "number": "46",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO port B pin 10; alternate functions: TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT."+ },+ {+ "number": "47",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO port B pin 11; alternate functions: TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN, LCD_G5, EVENTOUT."+ },+ {+ "number": "48",+ "name": "VCAP1",+ "type": "passive",+ "description": "Capacitor decoupling pin for internal voltage regulator (1.0 V supply); connect to external capacitor (typically 2.2 µF or 10 µF)."+ },+ {+ "number": "49",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (reference potential 0 V)."+ },+ {+ "number": "50",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply (1.7 V to 3.6 V) for digital core and I/O logic."+ },+ {+ "number": "51",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO port B pin 12; alternate functions: TIM1_BKIN, I2C2_SMBA, SPI2_NSS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT."+ },+ {+ "number": "52",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO port B pin 13; alternate functions: TIM1_CH1N, SPI2_SCK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1, EVENTOUT; OTG_HS_VBUS available."+ },+ {+ "number": "53",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO port B pin 14; alternate functions: TIM1_CH2N, TIM8_CH2N, SPI2_MISO, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT."+ },+ {+ "number": "54",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO port B pin 15; alternate functions: RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, TIM12_CH2, OTG_HS_DP, EVENTOUT."+ },+ {+ "number": "55",+ "name": "PD8",+ "type": "bidirectional",+ "description": "GPIO port D pin 8; alternate functions: USART3_TX, SPDIFRX_IN11, FMC_D13, EVENTOUT."+ },+ {+ "number": "56",+ "name": "PD9",+ "type": "bidirectional",+ "description": "GPIO port D pin 9; alternate functions: USART3_RX, FMC_D14, EVENTOUT."+ },+ {+ "number": "57",+ "name": "PD10",+ "type": "bidirectional",+ "description": "GPIO port D pin 10; alternate functions: USART3_CK, FMC_D15, LCD_B3, EVENTOUT."+ },+ {+ "number": "58",+ "name": "PD11",+ "type": "bidirectional",+ "description": "GPIO port D pin 11; alternate functions: I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A, FMC_A16/CLE, EVENTOUT."+ },+ {+ "number": "59",+ "name": "PD12",+ "type": "bidirectional",+ "description": "GPIO port D pin 12; alternate functions: TIM4_CH1, LPTIM1_IN1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1, SAI2_FS_A, FMC_A17/ALE, EVENTOUT."+ },+ {+ "number": "60",+ "name": "PD13",+ "type": "bidirectional",+ "description": "GPIO port D pin 13; alternate functions: TIM4_CH2, LPTIM1_OUT, I2C4_SDA, QUADSPI_BK1_IO3, SAI2_SCK_A, FMC_A18, EVENTOUT."+ },+ {+ "number": "61",+ "name": "PD14",+ "type": "bidirectional",+ "description": "GPIO port D pin 14; alternate functions: TIM4_CH3, UART8_CTS, FMC_D0, EVENTOUT."+ },+ {+ "number": "62",+ "name": "PD15",+ "type": "bidirectional",+ "description": "GPIO port D pin 15; alternate functions: TIM4_CH4, UART8_RTS, FMC_D1, EVENTOUT."+ },+ {+ "number": "63",+ "name": "PC6",+ "type": "bidirectional",+ "description": "GPIO port C pin 6; alternate functions: TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDMMC1_D6, DCMI_D0, LCD_HSYNC, EVENTOUT."+ },+ {+ "number": "64",+ "name": "PC7",+ "type": "bidirectional",+ "description": "GPIO port C pin 7; alternate functions: TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC1_D7, DCMI_D1, LCD_G6, EVENTOUT."+ },+ {+ "number": "65",+ "name": "PC8",+ "type": "bidirectional",+ "description": "GPIO port C pin 8; alternate functions: TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, SDMMC1_D0, DCMI_D2, EVENTOUT."+ },+ {+ "number": "66",+ "name": "PC9",+ "type": "bidirectional",+ "description": "GPIO port C pin 9; alternate functions: MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, SDMMC1_D1, DCMI_D3, EVENTOUT."+ },+ {+ "number": "67",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO port A pin 8; alternate functions: MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT."+ },+ {+ "number": "68",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO port A pin 9; alternate functions: TIM1_CH2, I2C3_SMBA, SPI2_SCK, USART1_TX, DCMI_D0, EVENTOUT; OTG_FS_VBUS available."+ },+ {+ "number": "69",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO port A pin 10; alternate functions: TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1, EVENTOUT."+ },+ {+ "number": "70",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO port A pin 11; alternate functions: TIM1_CH4, USART1_CTS, CAN1_RX, OTG_FS_DM, LCD_R4, EVENTOUT."+ },+ {+ "number": "71",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO port A pin 12; alternate functions: TIM1_ETR, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, LCD_R5, EVENTOUT."+ },+ {+ "number": "72",+ "name": "PA13",+ "type": "bidirectional",+ "description": "GPIO port A pin 13 (JTMS-SWDIO); alternate functions: JTMS-SWDIO, EVENTOUT; dedicated JTAG/SWD debug port pin."+ },+ {+ "number": "73",+ "name": "VCAP2",+ "type": "passive",+ "description": "Capacitor decoupling pin for internal voltage regulator (1.0 V supply); connect to external capacitor (typically 2.2 µF or 10 µF)."+ },+ {+ "number": "74",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (reference potential 0 V)."+ },+ {+ "number": "75",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply (1.7 V to 3.6 V) for digital core and I/O logic."+ },+ {+ "number": "76",+ "name": "PA14",+ "type": "bidirectional",+ "description": "GPIO port A pin 14 (JTCK-SWCLK); alternate functions: JTCK-SWCLK, EVENTOUT; dedicated JTAG/SWD debug port pin."+ },+ {+ "number": "77",+ "name": "PA15",+ "type": "bidirectional",+ "description": "GPIO port A pin 15 (JTDI); alternate functions: JTDI, TIM2_CH1, HDMI-CEC, SPI1_NSS, SPI3_NSS, UART4_RTS, EVENTOUT; JTAG debug pin."+ },+ {+ "number": "78",+ "name": "PC10",+ "type": "bidirectional",+ "description": "GPIO port C pin 10; alternate functions: SPI3_SCK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, DCMI_D8, LCD_R2, EVENTOUT."+ },+ {+ "number": "79",+ "name": "PC11",+ "type": "bidirectional",+ "description": "GPIO port C pin 11; alternate functions: SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, DCMI_D4, EVENTOUT."+ },+ {+ "number": "80",+ "name": "PC12",+ "type": "bidirectional",+ "description": "GPIO port C pin 12; alternate functions: TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9, EVENTOUT."+ },+ {+ "number": "81",+ "name": "PD0",+ "type": "bidirectional",+ "description": "GPIO port D pin 0; alternate functions: CAN1_RX, FMC_D2, EVENTOUT."+ },+ {+ "number": "82",+ "name": "PD1",+ "type": "bidirectional",+ "description": "GPIO port D pin 1; alternate functions: CAN1_TX, FMC_D3, EVENTOUT."+ },+ {+ "number": "83",+ "name": "PD2",+ "type": "bidirectional",+ "description": "GPIO port D pin 2; alternate functions: TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, DCMI_D11, EVENTOUT."+ },+ {+ "number": "84",+ "name": "PD3",+ "type": "bidirectional",+ "description": "GPIO port D pin 3; alternate functions: SPI2_SCK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, EVENTOUT."+ },+ {+ "number": "85",+ "name": "PD4",+ "type": "bidirectional",+ "description": "GPIO port D pin 4; alternate functions: USART2_RTS, FMC_NOE, EVENTOUT."+ },+ {+ "number": "86",+ "name": "PD5",+ "type": "bidirectional",+ "description": "GPIO port D pin 5; alternate functions: USART2_TX, FMC_NWE, EVENTOUT."+ },+ {+ "number": "87",+ "name": "PD6",+ "type": "bidirectional",+ "description": "GPIO port D pin 6; alternate functions: SPI3_MOSI, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2, EVENTOUT."+ },+ {+ "number": "88",+ "name": "PD7",+ "type": "bidirectional",+ "description": "GPIO port D pin 7; alternate functions: USART2_CK, SPDIFRX_IN0, FMC_NE1, EVENTOUT."+ },+ {+ "number": "89",+ "name": "PB3",+ "type": "bidirectional",+ "description": "GPIO port B pin 3 (JTDO/TRACESWO); alternate functions: JTDO/TRACESWO, TIM2_CH2, SPI1_SCK, SPI3_SCK, EVENTOUT; JTAG debug pin."+ },+ {+ "number": "90",+ "name": "PB4",+ "type": "bidirectional",+ "description": "GPIO port B pin 4 (NJTRST); alternate functions: NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS, EVENTOUT; JTAG debug pin."+ },+ {+ "number": "91",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO port B pin 5; alternate functions: TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, EVENTOUT."+ },+ {+ "number": "92",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO port B pin 6; alternate functions: TIM4_CH1, HDMI-CEC, I2C1_SCL, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, FMC_SDNE1, DCMI_D5, EVENTOUT."+ },+ {+ "number": "93",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO port B pin 7; alternate functions: TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC, EVENTOUT."+ },+ {+ "number": "94",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection pin (pull to VDD for boot from memory, leave floating or ground for boot from flash); sampled during reset."+ },+ {+ "number": "95",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO port B pin 8; alternate functions: TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDMMC1_D4, DCMI_D6, LCD_B6, EVENTOUT."+ },+ {+ "number": "96",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO port B pin 9; alternate functions: TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS, CAN1_TX, SDMMC1_D5, DCMI_D7, LCD_B7, EVENTOUT."+ },+ {+ "number": "97",+ "name": "PE0",+ "type": "bidirectional",+ "description": "GPIO port E pin 0; alternate functions: TIM4_ETR, LPTIM1_ETR, UART8_RX, SAI2_MCK_A, FMC_NBL0, DCMI_D2, EVENTOUT."+ },+ {+ "number": "98",+ "name": "PE1",+ "type": "bidirectional",+ "description": "GPIO port E pin 1; alternate functions: LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3, EVENTOUT."+ },+ {+ "number": "99",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (reference potential 0 V)."+ },+ {+ "number": "100",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply (1.7 V to 3.6 V) for digital core and I/O logic."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: VCAP1 and VCAP2 decoupling capacitor pins marked as passive; verify if these should be unconnected o; BYPASS_REG pin referenced in TFBGA216 variant (pin L5) not present in LQFP100 - regulator configurat; PC13, PC14, PC15, and PI8 have limited sink current (3 mA max) due to power switch - speed should no"+ ],+ "pages_sent": 64,+ "cost_usd": 0.606,+ "at": "2026-10-07T07:45:55"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039601994776576",+ "pages": 199,+ "sha256": "b2a69a47a26f41f0",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 100,+ "described": 100,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32f750v8t6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f750v8t6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "2375c33ac6eb0ade79e4e363d8f1d2af3551a4bde64ed19e1b7ef7d9749f822f",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}